Refine
Has Fulltext
- yes (25)
Is part of the Bibliography
- yes (25)
Year of publication
Document Type
- Doctoral Thesis (25)
Keywords
- Quantenmechanik (5)
- Exziton (4)
- Femtosekundenspektroskopie (4)
- Spektroskopie (4)
- Ultrakurzzeitspektroskopie (4)
- Molekularbewegung (3)
- Molekulardynamik (3)
- QM/MM (3)
- Quantendynamik (3)
- Ultraschnelle Photochemie (3)
The aim of the present work is the development and implementation of new simulation
possibilities for the CAST program package. Development included, among other
things, the partial parallelization of the already existing force fields, extension of the
treatment of electrostatic interactions and implementation of molecular dynamics and
free energy algorithms.
The most time consuming part of force field calculations is the evaluation of the nonbonded
interactions. The calculation of these interactions has been parallelized and
it could be shown to yield a significant speed up for multi-core calculations compared
to the serial execution on only one CPU. For both, simple energy/gradient as well as
molecular dynamics simulations the computational time could be significantly reduced.
To further increase the performance of calculations employing a cutoff radius, a linkedcell
algorithm was implemented which is able to build up the non-bonded interaction
list up to 7 times faster than the original algorithm.
To provide access to dynamic properties based on the natural time evolution of a system,
a molecular dynamics code has been implemented. The MD implementation features
two integration schemes for the equations of motion which are able to generate stable
trajectories. The basic MD algorithm as described in Section 1.2 leads to the sampling
in the microcanonical (NVE) ensemble. The practical use of NVE simulations is limited
though because it does not correspond to any experimentally realistic situation.
More realistic simulation conditions are found in the isothermal (NVT) and isothermalisobaric
(NPT) ensembles. To generate those ensembles, temperature and pressure
control has been implemented. The temperature can be controlled in two ways: by direct
velocity scaling and by a Nose-Hoover thermostat which produces a real canonical
ensemble. The pressure coupling is realized by implementation of a Berendsen barostat.
The pressure coupling can be used for isotropic or anisotropic box dimensions with the
restriction that the angles of the box need to be 90. A crucial simulation parameter in
MD simulations is the length of the timestep. The timestep is usually in the rang of 1fs.
Increasing the timestep beyond 1fs can lead to unstable trajectories since the fastest
motion in the system, usually the H-X stretch vibration can not be sampled anymore.
A way to allow for bigger timesteps is the use of a constraint algorithm which constrains the H-X bonds to the equilibrium distance. For this the RATTLE algorithm has been
implemented in the CAST program. The velocity Verlet algorithm in combination with
the RATTLE algorithm has been shown to yield stable trajectories for an arbitrary
length of simulation time. In a first application the MD implementation is used in conjunction
with the MOPAC interface for the investigation of PBI sidechains and their
rigidity. The theoretical investigations show a nice agreement with experimentally obtained
results. Based on the MD techniques two algorithms for the determination of free
energy differences have been implemented. The umbrella sampling algorithm can be
used to determine the free energy change along a reaction coordinate based on distances
or dihedral angles. The implementation was tested on the stretching of a deca-L-alanine
and the rotation barrier of butane in vacuum. The results are in nearly perfect agreement
with literature values. For the FEP implementation calculations were performed
for a zero-sum transformation of ethane in explicit solvent, the charging of a sodium
ion in explicit solvent and the transformations of a tripeptide in explicit solvent. All
results are in agreement with benchmark calculations of the NAMD program as well
as literature values. The FEP formalism was then applied to determine the relative
binding free energies between two inhibitors in an inhibitor-protein complex.
Next to force fields, ab-initio methods can be used for simulations and global optimizations.
Since the performance of such methods is usually significantly poorer than force
field applications, the use for global optimizations is limited. Nevertheless significant
progress has been made by porting these codes to GPUs. In order to make use of these
developments a MPI interface has been implemented into CAST for communication
with the DFT code TeraChem. The CAST/TeraChem combination has been tested
on the $H_2 O_{10}$ cluster as well as the polypeptide met-Enkephalin. The pure ab-initio
calculations showed a superior behavior compared to the standard procedure where the
force field results are usually refined using quantum chemical methods.
This work brings forward successful implementations of ultrafast chirality-sensitive spectroscopic techniques by probing circular dichroism (CD) or optical rotation dispersion (ORD). Furthermore, also first steps towards chiral quantum control, i.e., the selective variation of the chiral properties of molecules with the help of coherent light, are presented.
In the case of CD probing, a setup capable of mirroring an arbitrary polarization state of an ultrashort laser pulse was developed. Hence, by passing a left-circularly polarized laser pulse through this setup a right-circularly polarized laser pulse is generated. These two pulse enantiomers can be utilized as probe pulses in a pump--probe CD experiment. Besides CD spectroscopy, it can be utilized for anisotropy or ellipsometry spectroscopy also. Within this thesis, the approach is used to elucidate the photochemistry of hemoglobin, the oxygen transporting protein in mammalian blood. The oxygen loss can be triggered with laser pulses as well, and the results of the time-resolved CD experiment suggest a cascade-like relaxation, probably through different spin states, of the metallo-porphyrins in hemoglobin.
The ORD probing was realized via the combination of common-path optical heterodyne interferometric polarimetry and accumulative femtosecond spectroscopy. Within this setup, on the one hand the applicability of this approach for ultrafast studies was demonstrated explicitly. On the other hand, the discrimination between an achiral and a racemic solution without prior spatial separation was realized. This was achieved by inducing an enantiomeric excess via polarized femtosecond laser pulses and following its evolution with the developed polarimeter. Hence, chiral selectivity was already achieved with this method which can be turned into chiral control if the polarized laser pulses are optimized to steer an enhancement of the enantiomeric excess.
Furthermore, within this thesis, theoretical prerequisites for anisotropy-free pump--probe experiments with arbitrary polarized laser pulses were derived. Due to the small magnitude of optical chirality-sensitve signals, these results are important for any pump--probe chiral spectroscopy, like the CD probing presented in this thesis. Moreover, since for chiral quantum control the variation of the molecular structure is necessary, the knowledge about rearrangement reactions triggered by photons is necessary. Hence, within this thesis the ultrafast Wolff rearrangement of an α-diazocarbonyl was investigated via ultrafast photofragment ion spectroscopy in the gas phase. Though the compound is not chiral, the knowledge about the exact reaction mechanism is beneficial for future studies of chiral compounds.
Die vorliegende Dissertation leistet einen Beitrag zur spektroskopischen Messmethodik nanoskaliger Strukturen. Im Mittelpunkt der Arbeit steht die Entwicklung und Erprobung eines spektrofluorimetrischen Aufbaus, mit dessen Hilfe ein aus Kohlenstoffnanoröhren und DNA-Oligomeren bestehendes supramolekulares Modellsystem einer optischen Untersuchung zugänglich gemacht wird. Die Vielseitigkeit der Messeinheit aus Mikroskop und Spektrometer wird an einer weiteren Substanzklasse untermauert. So wird das Emissionsverhalten von in Siliziumcarbidkristallen induzierten Defektzentren einer räumlich, spektral und zeitlich aufgelösten Charakterisierung unterzogen.
Die zentrale Komponente des Spektrofluorimetrieaufbaus stellt eine Superkontinuumlichtquelle dar. In Verbindung mit einem elektronisch geregelten Filtermodul zur Wellenlängenselektion erlaubt sie die Durchführung von Photolumineszenz-Anregungsexperimenten. Im Gegensatz zu kommerziell erhältlichen Systemen, die überwiegend auf eine spektroskopische Charakterisierung gelöster oder kolloidal stabilisierter Substanzen abzielen, erlaubt der hier realisierte Aufbau auch die PL- mikroskopische Untersuchung kondensierter Proben, was durch die Epi-Bauweise auch opake Substrate einschließt. Der Einsatz von InGaAs-Sensoren weitet das Detektionsfenster auf den Nahinfrarotbereich aus, sowohl hinsichtlich des Kamera- als auch des Spektroskopiekanals.
Anhand verschiedenartiger Kohlenstoffnanorohrproben, die entweder in flüssiger Phase dispergiert oder in festem Zustand als Film abgeschieden vorliegen, wird die Leistungsfähigkeit des PLE-Experiments unter Beweis gestellt. Neben der Zuordnung der Chiralitäten in polydispersen SWNT-Suspensionen wird dies auch durch die Untersuchung von Energietransferprozessen und die Studie von Umgebungseinflüssen demonstriert.
Die Charakterisierung des DNA-SWNT-Modellsystems in mikrofluidischer Umgebung macht von der fluoreszenzmikroskopischen Detektionseinheit Gebrauch. Während die intrinsische Photolumineszenz der Nanoröhren sicherstellen soll, dass Letztere in ausreichender Anzahl auf den mikrostrukturierten Substraten vorhanden sind, wird die extrinsische Photolumineszenz der funktionalisierten Oligonukleotide als spektroskopisches Maß für die DNA-Konzentration herangezogen. Das hierbei beobachtete Agglomerationsverhalten der farbstoffmarkierten Oligomere geht mit einer lokal erhöhten Fluoreszenzintensität einher und erlaubt damit die quantitative Auswertung der auf PL-Einzelbildern basierenden Zeitserien. Zugleich wird damit eine Abschätzung der DNA-Belegung auf den Nanoröhren möglich. Im Falle der aus 16 alternierenden Guanin-Thymin-Einheiten bestehenden Basensequenz lösen sich nach Initiieren des Desorptionsvorgangs ein Großteil der Oligomere von der Nanorohroberfläche ab. Lediglich ein Fünftel bleibt in adsorbierter Form zurück, was sich jedoch für die Hybridstabilität als ausreichend erweist. Die Freisetzung weiterer Oligomere bleibt bei der Versuchstemperatur von 20 °C trotz der hohen Verdünnung aus, da aufgrund des größeren Interadsorbatabstands und der damit verbundenen Abnahme repulsiver Wechselwirkungen die Aktivierungsbarriere für ihre Desorption steigt. Die Stabilität der DNA-SWNT-Konjugate liegt demnach in ihrer kinetischen Inertheit begründet, die sie vor einer Reaggregation bewahrt.
Die Studie der in Siliziumcarbid induzierten Fehlstellendefekte kann als Beleg für die breite Anwendbarkeit des spektrofluorimetrischen Aufbaus gelten. PL-Mikroskopaufnahmen zeigen hierbei, dass die Anzahl der Defektzentren mit der Bestrahlungsintensität kontrolliert werden kann – von einer kontinuierlichen Verteilung bei hohen Strahlungsintensitäten über heterogene Defektansammlungen bis hin zu Einzeldefektstellen bei niedrigen Strahlungsdosen. Letztere resultieren in beugungsbegrenzten Signaturen und erlauben damit eine Charakterisierung des abbildenden Systems sowie des Anregungsfokus. Anhand der PLE-Analyse lässt sich das Absorptionsmaximum abschätzen. Aussagen zur zeitlichen Entwicklung des Emissionsverhaltens werden durch TCSPC-Messungen erhalten. Die abschließende Untersuchung des Photonenflusses mit Hilfe von Korrelationsexperimenten nach Hanbury Brown-Twiss zeigt bei Raumtemperatur kein Auftreten von Photonantibunching.
In dieser Dissertation wurden zwei Aspekte der Wechselwirkung von Laserpulsen mit Molekülen betrachtet: Erstens wurden numerische Algorithmen, die auf der zeitabhängigen Störungstheorie basieren, zur Berechnung von quantenmechanischen Wellenfunktionen analysiert. Zweitens wurden Effekte der absoluten Phase (Carrier envelope phase = CEP) von Laserpulsen bei der Laseranregung molekularer Systeme analysiert. In den Analysen zum ersten Aspekt wurden zwei verschiedene Algorithmen - in dieser Arbeit als simple und improved algorithm bezeichnet - verwendet, und die Normabweichung von mit diesen Algorithmen berechneten Wellenfunktionen untersucht. Es konnte gezeigt werden, dass diese Normabweichung für beide Algorithmen in zwei unterschiedliche Beiträge zerlegt werden kann. Der erste Normabweichungsbeitrag tritt aufgrund der numerischen Diskretisierung der Zeit auf und verschwindet, wenn der Zeitschritt, der die Dauer der Intervalle für diese Diskretisierung angibt, gegen Null geht. Man kann den ersten Normabweichungsbeitrag mit exzellenter Genauigkeit berechnen und seine Eigenschaften, die sich für die beiden Algorithmen erheblich unterschieden, eingehend analysieren. Der zweite Normabweichungsbeitrag tritt dadurch auf, dass die zeitabhängige Störungstheorie nicht normerhaltend ist, und geht daher gegen Null, wenn die Störungsordnung gegen unendlich geht. Dieser zweite Beitrag ist außerdem in guter Näherung unabhängig vom Zeitschritt und für beide Algorithmen näherungsweise gleich. Des Weiteren kann man das Verhalten des zweiten Normabweichungsbeitrags im Gegensatz zum ersten Beitrag nur qualitativ beschreiben. Für die Analyse zum zweiten Themengebiet dieser Arbeit, den CEP-Effekten, wurde betrachtet, ob CEP-Effekte auch für Laserpulse beliebiger Länge auftreten können. Über eine analytische Betrachtung erkennt man, dass dies für ein Zweiniveausystem nur dann der Fall ist, wenn beide Zustände vor Beginn der Wechselwirkung des Systems mit dem Laserpuls besetzt sind. Man kann aus diesem Ergebnis folgern, dass für einen Laserpuls, der zwei elektronische Zustände eines Moleküls über Einphotonenübergänge koppelt, in der Regel kein CEP-Effekt für beliebige Längen dieses Pulses auftritt. Der Grund dafür ist, dass vor der Wechselwirkung eines molekularen Systems mit einem Laserpuls für dieses üblicherweise nur der elektronische Grundzustand besetzt ist. In dieser Arbeit wird gezeigt, dass dieses Problem durch ein spezielles Zweipulsschema für die Anregung eines molekularen Systems gelöst werden kann. Für dieses Pulsschema wird ein erster Puls verwendet, der zeitlich so kurz ist, dass Wellenpakete in mehreren elektronischen Zuständen angeregt werden. Der nachfolgende zweite Laserpuls ist spektral schmal, und seine zeitliche Länge kann beliebig groß gewählt werden. Man erhält für dieses Pulsschema Observablen, die von der CEP des zweiten Pulses, aber nicht von der CEP des ersten Pulses abhängen; somit ist ein CEP-Effekt nachweisbar. Derartige Observablen sind geometrische Asymmetrien für Zerfallsprodukte von Photodissoziationsreaktionen. Insbesondere unterscheidet sich das hier vorgestellte Pulsschema von anderen Zweipulsschemata, für welche Observablen von der Differenz der CEPs beider Pulse abhängen, aber nicht von der CEP einer der beiden Pulse allein.
In this work the synthesis, the spectroscopic and electrochemical investigation as well as some applications of a broad diversity of indolenine squaraine dyes were presented. This diversity was based on two parent squaraine dyes, one standard trans-configured compound (M1) and one in which one central oxygen atom was replaced by a dicyanomethylene moiety (M2), which increased the acceptor strength and induced a cis-configuration. The variety of synthesised dyes included functionalised squaraine monomers, donor- and acceptor-substituted monomeric model squaraines, donor- and acceptor-squaraine copolymers, pure squaraine homopolymers, a squaraine-squaraine copolymer, as well as some conjugated cyclic oligomers.
In order to be able to synthesise all these different kinds of dyes, several bromine and boronic ester derivatives were synthesised, which enabled the use of the Suzuki cross coupling reaction, to generate model dyes and copolymers. In addition, the bromine derivatives were used to carry out the Yamamoto homocoupling reaction to the respective homopolymers and macrocycles.
The absorption maximum of unsubstituted reference dye M1 was found at ~ 15500 cm–1, while that of M2 was red-shifted to ~ 14300 cm–1 due to the increased acceptor strength of the central unit. The extinction coefficients were in the order of ~ 300000 M–1 cm–1 and ~ 200000 M–1 cm–1, respectively. It was found that the implementation of functional groups (M3–M9), additional electron donors (M10–M19) or acceptors (M20–M22) at the periphery lead to bathochromic shifts of the absorption depending on the strength of either - and/or -donating properties of the substituents.
For the bis- and triarylamine substituted dyes M10–M13 and the dibrominated dyes M5 and M7 the electronic structure of the mono- and diradical (di)cations was explored using the interplay of cyclic voltammetry, spectroelectrochemistry, and DFT calculations. It was demonstrated that the monoradical cations still show a cyanine-like character and are delocalised Robin-Day class III species due to the low redox potential of the squaraine bridge between the additional amine redox centres. To the best of my knowledge, this made M13+∙, with an N-N-distance of 26 bonds between the additional redox centres to the longest bis(triarylamine) radical cation that is completely delocalised. For the diradical dications, the situation was of larger complexity. The computed most stable energetic state of the dianisylamine-substituted dyes turned out to be a broken-symmetry state with almost equal contributions of an open-shell singlet and triplet state. In addition, it was shown that the HOMO–1→HOMO transition dominated the absorption spectra of the diradical dications where the trans-/cis-configuration of the squaraines had a direct impact due to symmetry reasons.
Based on the donor–squaraine model compounds M10–M19, a series of donor–squaraine copolymers was synthesised (P7–P12) in order to further red shift and broaden the low energy absorption band. However, these effects were only of marginal extent. Both the optical and the electrochemical derived band gaps were barely lowered compared to the respective monomeric model dyes. This was assigned to an increased squaraine-squaraine distance and resulting lower exciton coupling between the squaraine chromophores due to the bridging units. In addition, according to semiempirical calculations the bridges were twisted out of the squaraine plane what reduced conjugational effects between the chromophores. To sum up, the idea to insert additional electron rich bridging units in order to create copolymers with broad and red-shifted absorption did not fully work out for the presented systems.
The addition of strong electron accepting NDI units at the periphery resulted in M21, the most unique monomeric model squaraine in this work. The common picture of a sharp low energy squaraine absorption completely altered due to the addition of the NDIs and a rather broad and solvent dependent low energy absorption was found. Spectroelectrochemical experiments and semiempirical calculations showed that this band is a superposition of the common squaraine HOMO→LUMO transition and a partial squaraine→NDI charge transfer transition. The latter was lost upon oxidation of the squaraine and the absorption spectrum of the monocation of M21 was found to be nearly a 1:1 image of a pure squaraine monocation. Both the monomeric model M21 and the respective copolymer P13 showed low electrochemically obtained band gaps of 1.05–1.20 eV, which were the lowest of all squaraines in this work. For both dyes, transient absorption measurements in the fs-time regime revealed the ultrafast formation of a CS state via an intermediate CT state within a few ps. Besides, charge recombination to the ground state also occured within a few ps. In the polymer, there was barely any further energy or charge transfer within the excited state lifetime and therefore the CS state was confined on adjacent squaraine-NDI pairs and did not further travel along the polymer strand.
The Ni-mediated Yamamoto homocoupling reaction was applied for the synthesis of the homopolymers (P1–P5). In contrast to the donor–squaraine copolymers, those polymers revealed strongly red-shifted and broad absorption in the red to NIR region in addition to a sharp fluorescence. These features could be explained to originate mainly from the exciton coupling of localised excited states and the presence of different superstructures in solution. For the polymers P1 and P2, an elongated J-type polymer chain caused the strong lowest energy absorption band whereas a zig-zag type arrangement of the single chromophores lead to transitions into both low and high energy excited states of the excitonic manifold. For the polymers P3 and P4, several polymer fractions of different size were investigated. Here, also an elongated chain with J-type character induced the lowest energy absorption band whereas a helical H-type arrangement caused transitions to higher energies of the excitonic manifold. The fractions to which these structures were formed depended on the chain length and the solvent. In thin film measurements, it was shown that the initially in solution formed superstructures were partly retained in the thin film but could be altered by annealing procedures. A control of the superstructures should enable the controlled tuning of the optical properties. Despite the strong interaction of the chromophores in the excited state, the redox potentials of the homopolymers barely differed to those of the respective reference dyes, indicating negligible electronic interaction in the ground state.
In addition squaraine-squaraine copolymer P6, consisting of alternating parent dyes M1 and M2, was synthesised. Likewise to the homopolymers, a broad and red-shifted absorption was observed. This was explained by exciton coupling theory, which was extended to also suit alternating copolymers. In toluene, an extraordinary narrow and intense lowest energy absorption band was observed. This exchange narrowing might be a result of a highly ordered J-type structure of the polymer especially in this solvent because it was not found in others. The features of the polymer may be compared to typical J-aggregates formed from monomeric cyanine molecules for example and the polymer used as model for excitonic interactions in an alternating copolymer. Transient absorption measurements revealed a strong energy dependence of the decay traces of the copolymer, most strikingly at early decay times. This was assigned to the occurrence of multiple excitations of one polymer strand (due to the large extinction coefficients of the polymer) and resulting exciton-exciton annihilation. Due to the large exciton diffusion constants that were estimated, the static exciton-exciton annihilation was the rate limiting process of the decay, in contrast to other conjugated polymers, where in thin film measurements the decay was diffusion controlled.
To sum up, for the polymers consisting of exclusively squaraine chromophores, it was shown that the exciton coupling of single chromophores with strong transition dipole moments was a fruitful way to tune the absorption spectra.
As a side product of some of the polycondensation reactions, unprecedented cyclic conjugated oligomers such as the triarylamine-bridged dimer Dim1, the cyclic homotrimers Tri1–Tri3, and the tetramer Tet1 were obtained by recycling GPC in low yields. Especially the cyclic trimers showed unusual absorption and even more extraordinary fluorescence properties. They showed multiple fluorescence bands in the NIR that covered a range from ~ 8000–12500 cm–1 (800–1250 nm). First hints from theoretical calculations indicated that the trimer was not fully planar but comprised a mixture of both planar and bent single squaraine chromophores. However, final results of the calculations were still missing at the time of writing.
In the last part of this work, the application of some monomeric and polymeric squaraines in binary and ternary bulk heterojunction solar cells was demonstrated. Also the utilisation as a dopant in a polymer matrix in an OLED device was shown. The homopolymers P1–P4 were tested in the binary BHJ solar cells revealing poor performances and especially very low short circuit currents. The utilisation of the polymers P3 and P4 that carried the dicyanomethylene group resulted in higher open circuit voltages due to the lower LUMO energy levels but still an overall poor performance. Neither for the different alkyl chains nor for the size of the polymers was a trend observed. In the ternary BHJ solar cells, small amounts of either monomer M14 or polymers P1A, P4–1 or P13 were added to a P3HT/PCBM system in order to generate an additional pathway for charge or energy transfer that should result in a better device performance. However, for none of the tested squaraines, improved solar cells could be built. In similarity to the binary solar cells, the short circuit currents were lower compared to a P3HT/PCBM reference device. These low short circuit currents indicated that the morphology of the squaraine dyes was the major limitation in those devices. It is possible that the dimethyl groups at the indolenine hindered a favoured alignment of the compounds that would allow decent charge transport. In the squaraine doped OLED the squaraine M6 worked rather well as an NIR emitter. Already at low dye loads the fluorescence of the host polymer SY-PPV was completely quenchend and emission from the squaraine was observed. For electroluminescence measurements, a lower dye load (0.5 wt.%) compared to the photoluminescence measurements was sufficient, indicating that apart from FRET additional quenching mechanisms were at work in the electrically driven devices such as charge carrier dynamics.
Synthese und Charakterisierung neuartiger Silicium-, Germanium- und zinnorganischer Riechstoffe
(2014)
Aufbauend auf dem Konzept der C/Si-Bioisosterie beschreibt die vorliegende Arbeit die Synthese und Charakterisierung siliciumhaltiger Derivate der Riechstoffe Galaxolide, Lilial, Bourgeonal, 5,7,7-Trimethyl-4-methylenoctanal und α-Galbanone sowie Beiträge zur Synthese eines silicium¬haltigen Derivats von δ-Damascone. Basierend auf der C/Ge- und C/Sn-Bioisosterie wurden zudem die Germa- und Stanna-Analoga von Lilial und Bourgeonal synthetisiert. Die entsprechenden Zielverbindungen sowie alle isolierten Zwischenstufen wurden durch NMR-Spektroskopie (1H, 11B, 13C, 15N, 29Si, 119Sn) und Elementaranalyse (C, H, N) charakterisiert. In einigen Fällen erfolgte zusätzlich eine Charakterisierung durch Einkristall-Röntgenstrukturanalyse oder Infrarot-Spektroskopie.
Quantenchemische Untersuchungen von Umgebungseinflüssen bei offen- und geschlossenschaligen Systemen
(2022)
In dieser Dissertation werden die Umgebungseinflüsse auf die strukturellen und elektronischen Eigenschaften von verschiedenen offen- und geschlossenschaligen Systemen mittels quantenchemischer Methoden berechnet.
Ein Kernpunkt umfasst die Untersuchung von verdreht angeordneten, biradikalischen Diborylalkenen, welche eine ungesättigte C2R2-Brücke (R = Et, Me) besitzen und durch cyclische (Alkyl)(amino)carbene (CAACs) stabilisiert werden. Quantenchemische Berechnungen zeigen, dass hauptsächlich sterische Effekte für die Ausbildung einer verdrehten Molekülanordnung verantwortlich sind, während bei geringen sterischen Wechselwirkungen (R = H) die Delokalisationseffekte überwiegen, wodurch eine planare Struktur begünstigt wird. Die Bevorzugung einer offenschaligen Singulettkonfiguration anstelle eines Tripletts ist auf den großen Energieunterschied der beiden einfach besetzten Molekülorbitale zurückzuführen. Durch die Berechnung der Lösungsmitteleffekte mithilfe von polarisierbaren Kontinuumsmodellen kann gefolgert werden, dass mit zunehmender statischer Dielektrizitätskonstante eine planare und geschlossenschalige Struktur stärker stabilisiert wird als eine verdrehte Anordnung.
Ein weiteres Thema dieser Dissertation befasst sich mit der quantenchemischen Analyse eines makrozyklischen Perylenbisimid-Trimersystems, welches eingebettet in einer Polymethylmethacrylat-Matrix bei Temperaturen nahe dem absoluten Nullpunkt eine Lokalisierung der ersten drei angeregten Zustände zeigt. Quantenchemische Vakuumberechnungen ergeben, dass unabhängig von der gegenseitigen geometrischen Orientierung der drei Perylenbisimid-Chromophore der Übergang vom Grundzustand in den S1-Zustand verboten ist und dass die ersten drei angeregten Zustände delokalisiert vorliegen. Mithilfe von expliziten Lösungsmittelmodellen kann jedoch gezeigt werden, dass das Auftreten dieser Lokalisierungen auf eine inhomogene Polymethylmethacrylat-Umgebung zurückzuführen ist, die zu einem Symmetriebruch und somit zu einer Zunahme der Oszillatorstärke für S1 und der Lokalisierungsgrade für S1, S2 und S3 führt.
Darüber hinaus wird der Lösungsmitteleinfluss auf die angeregten Zustände des Azulens mittels impliziter und expliziter Lösungsmittelmodelle berechnet. Bei einer Erhöhung der dynamischen Dielektrizitätskonstante im impliziten Modell nehmen die Anregungsenergien der vertikalen Singulettzustände ab, wobei der Effekt mit steigender Oszillatorstärke zunimmt. Die Auswirkung der statischen Dielektrizitätskonstante auf die Anregungsenergien ist dagegen deutlich schwächer ausgeprägt. Im expliziten Modell bewirkt das Lösungsmittel ebenfalls eine Abnahme der Anregungsenergie des hellen Singulettzustands, wenn auch in geringerem Umfang als im impliziten Modell.
Als letztes Thema wird der Inhibitionsmechanismus der Cysteinprotease Rhodesain durch zwei modifizierte 1,4-Naphthoquinone untersucht. Während beide Naphthoquinone an der 2-Position eine Dipeptideinheit aufweisen, besitzen sie an der 3-Position entweder einen Nitril- oder Chloridsubstituenten. Zwar erfolgt bei beiden Derivaten die Inhibition über einen kovalent-reversiblen Mechanismus, jedoch verläuft die Hemmung im Falle des Nitrilderivats erheblich effektiver. Die quantenchemischen Berechnungen eines vereinfachten Modells zeigen, dass die Cysteineinheit (HS-R) bevorzugt in einer exothermen und reversiblen Additionsreaktion an die elektronenarme C-C-Doppelbindung der Naphthoquinone anlagert. Dabei werden kleinere Reaktionsenergien für die Reaktion des Chlorderivats als für die Reaktion des Nitrilderivats erhalten. Durch die Berücksichtigung von Wasser in einem impliziten Lösungsmittelmodell kommt es bei fast allen Reaktionsprodukten zu einer Energiezunahme, die bei der Reaktion des Nitrilderivats stärker ausfällt als bei der Reaktion des Chlorderivats.
Diese Arbeit befasst sich mit der störungstheoretischen Berechnung von zweidimensionalen Photonen-Echo-Spektren für das elektronische und vibronische Modell eines Homo- und Hetero-Dimers sowie für ein vibronisches Modell eines Monomers unter dem Einfluss einer System-Bad-Wechselwirkung. Bei der Analyse der Dimerspektren steht neben der Orientierungsmittelung der Polarisation dritter Ordnung der Unterschied zwischen elektronischen und vibronischen Spektren sowie der Vergleich der Spektren von Homo- und Hetero-Dimeren im Zentrum des Interesses. Bei der Analyse der Monomer-Spektren steht die Behandlung einer dissipativen Dynamik bzw. des vibrational-coolings innerhalb eines stochastischen Ansatzes im Vordergrund.
Der erste Teil dieser Arbeit konzentriert sich auf die störungstheoretische Berechnung der Polarisation dritter Ordnung in Dimeren. Dabei werden alle Aspekte und Ergebnisse für verschiedene Geometrien der Übergangsdipolmomente analysiert und diskutiert. Die Berechnungen berücksichtigen dabei auch die zufällige Anordnung der Moleküle in der Probe. Die Zusammenhänge zwischen den 2D-Spektren und den Eigenschaften der Monomereinheiten, die Abhängigkeit der Intensitäten mancher Peaks von der zeitlichen Abfolge der Pulse sowie der Einfluss der elektronischen Kopplung und verschiedener Übergangsdipolmomente ermöglichen ein grundlegendes Verständnis der elektronischen Photonen-Echo-Spektren. Im elektronischen Dimer wird der Hetero-Dimer-Charakter durch verschiedene Monomeranregungsenergien sowie unterschiedliche Übergangsdipolmomente der Monomereinheiten bestimmt. Der Einfluss dieser Größen auf die Photonen-Echo-Spektren kann durch die Kombination einer detaillierten analytischen Betrachtung und numerischen Rechnungen anschaulich nachvollzogen werden. In der vibronischen Betrachtungsweise zeigt sich, dass die Spektren deutlich an Komplexität gewinnen. Durch die Vibrationsfreiheitsgrade vervielfachen sich die möglichen Übergänge im System und damit die möglichen Peakpositionen im Spektrum. Jeder Peak spaltet in eine Vibrationssubstruktur auf, die je nach ihrer energetischen Position mit anderen überlagern kann. Der Vergleich zwischen Homo- und Hetero-Dimer-Spektren wird durch die Wahl verschiedener Vibrationsfrequenzen und unterschiedlicher Gleichgewichtsabstände entlang der Vibrationskoordinaten erweitert.
Die Berechnung des Orientierungsmittels erfolgt mit zwei verschiedenen Ansätzen. Zum einen wird das Mittel durch den numerischen sampling-Ansatz berechnet. Dabei werden Azimutal- und Polarwinkel in kleinen Winkelinkrementen abgetastet und für jede Kombination ein 2D-Spektrum berechnet. Die Einzelspektren werden anschließend gemittelt. Diese Methode erweist sich im Dimer als sehr effektiv. Zum anderen erlaubt die analytische Auswertung der Polarisation dritter Ordnung, das gemittelte Spektrum direkt in einer einzelnen Rechnung durch winkelgemittelte Gewichtungsfaktoren zu bestimmen. Bei der Berechnung der elektronischen 2D-Spektren ist diese Methode sehr leistungsfähig, da alle Ausdrücke analytisch bekannt sind. Für vibronische Systeme ist dieser Ansatz ebenfalls sehr leistungsstark, benötigt aber eine einmalige aufwendige Analyse vor der Berechnung. Trotz der deutlich erhöhten Anzahl an Zustandsvektoren, die propagiert werden müssen, ist diese Methode circa zweimal schneller als die direkte Mittelung mit der sampling-Methode.
Im zweiten Teil konzentriert sich die Arbeit auf die Beschreibung eines Monomers, das sich in einer dissipativen Umgebung befindet. Dabei wird auf die Lösung einer stochastischen Schrödingergleichung zurückgegriffen. Speziell wird die sogenannte quantum-state-diffusion-Methode benutzt. Dabei werden nicht nur die Erwartungswerte für die Energie und den Ort, sondern auch die Polarisation dritter Ordnung – eine phasensensitive Größe – bestimmt. In der theoretischen Fragestellung wird dabei, ausgehend von der von-Neumann Gleichung, die Zeitentwicklung der reduzierten Dichtematrix durch die Integration einer stochastischen zeitabhängigen Schrödingergleichung reproduziert. In Rechnungen koppelt die Stochastik über die Erwartungswerte von Ort und Impuls die verschiedenen störungstheoretischen Korrekturen der Wellenfunktion miteinander. Die Spektren, die aus den numerischen Simulationen erhalten werden, spiegeln das dissipative Verhalten des Systems detailliert wider. Eine Analyse der Erwartungswerte von Ort und Energie zeigt, dass sich die einzelnen elektronischen Zustände wie gedämpfte harmonische Oszillatoren verhalten und jeweils einen exponentiellen Zerfall abhängig von der Dissipationskonstante zeigen. Dieser Teil der Arbeit erweitert vorausgehende Untersuchungen, bei denen ein vereinfachter Ansatz zu Einsatz kam, der die korrelierte Stochastik nicht berücksichtigte.
The invention of laser pulse shapers allowed for various quantum control experiments, where a chemical reaction is guided by specifically tailored laser pulses. However, despite of the prominent role of the liquid phase in chemistry, no successful attempt for controlling the selectivity of a bond-fission reaction has yet been reported in this state of matter. Promising candidates for such an experiment are C$_{\infty\mathrm{v}}$-symmetric trihalide anions with two different chemical bonds like $\ce{I2Cl-}$, because these molecules notionally offer the most simplest selectivity-control scenario of breaking either the one or the other bond and they are expected to dissociate under ultraviolet (UV) irradiation like it is known for the most-studied trihalide $\ce{I3-}$.
In order to investigate in this thesis the possibility that the dissociation reaction of such trihalides branches into two different photofragments, the ultrafast photodissociation dynamics of $\ce{I3-}$, $\ce{Br3-}$, $\ce{IBr2-}$ and $\ce{ICl2-}$ (point group D$_{\infty\mathrm{h}}$) as well as of $\ce{I2Br-}$ and $\ce{I2Cl-}$ (point group C$_{\infty\mathrm{v}}$) in dichloromethane solution were measured with broadband transient absorption spectroscopy in magic-angle configuration. The identification of the reaction pathway(s) relies on vibrational wavepacket oscillations, which survive the dissociation process and therefore carry not only informations about the reactant trihalides but also about the fragment dihalides.
These characteristic vibrational wavenumbers were extracted from the measured transient absorption spectra by globally fitting the population dynamics together with the wavepacket dynamics. Until recently, such a combined model function was not available in the well-established fitting tool Glotaran. This made it inevitable to develop a custom implementation of the underlying variable-projection fitting algorithm, for which the computer-algebra software Mathematica was chosen. Mathematica's sophisticated built-in functions allow not only for a high flexibility in constructing arbitrary model functions, but also offer the possibility to automatically calculate the derivative(s) of a model function. This allows the fitting procedure to use the exact Jacobian matrix instead of approximating it with the finite difference method.
Against the expectation, only one of the two thinkable photodissociation channels was found for each of the investigated C$_{\infty\mathrm{v}}$ trihalides. Since the photofragments recombine, their absorption signal as well as the reactant ground state bleach recover. This happens in a biexponential manner, which in the case of $\ce{I3-}$ was interpreted by Ruhman and coworkers with the direct formation of a neutral dihalogen fragment $\ce{I2}$ beside the negatively charged dihalide fragment $\ce{I2-}$. In this thesis, such a direct reaction channel was not found and instead the fast component of the biexponential decay is explained with vibrational excess energy mediating the recombination-preceding electron transfer process $\ce{I2- + I -> I2 + I-}$, while the slow component is attributed to cooled-down fragments.
In addition to the trihalide experiments, the possibility of a magic-angle configuration for polarization-shaping control experiments was theoretically investigated in this thesis by deriving magic-angle conditions for the third-order electric-dipole response signal of arbitrarily polarized laser pulses. Furthermore, the subtleties of anisotropy signals violating the well-known range of \numrange{-0.2}{0.4} were studied.
Im Rahmen dieser Arbeit werden unterschiedliche Aspekte der korrelierten Elektronen-Kerndynamik, anhand verschiedener Modellsysteme untersucht. Dabei wird vor allem auf den Vergleich numerisch exakter und approximativer Methoden zur Beschreibung der Wellenpaketdynamik eingegangen, wobei bei letzterem das Augenmerk auf der Born-Oppenheimer (BO) Näherung liegt. Die verwendeten Modellsysteme erlauben es, die gekoppelte Elektronen-Kern-Dynamik exakt zu beschreiben. Die daraus gewonnenen Ergebnisse dienen als Referenz für den Vergleich mit den Näherungsmethoden.
Im ersten Teil der Arbeit wird die Dynamik eines Wellenpakets in der Umgebung einer Konischen-Durchschneidung (CI) untersucht, wobei die Beschreibung des Wellenpakets quantenmechanisch und durch die klassische Mechanik im Phasenraum erfolgt.
Im zweiten Teil wird die Wahrscheinlichkeitsflussdichte untersucht. Zuerst wird ein Fall konstruiert, in welchem die Bewegung im elektronischen Grundzustand stattfindet, sodass die Bedingungen der BO Näherung erfüllt sind. Dabei wird vor allem auf das Verschwinden der elektronischen Wahrscheinlichkeitsflussdichte innerhalb der BO Näherung eingegangen. Im weiteren Verlauf werden die Flussdichten in der Umgebung einer CI untersucht, wobei unterschiedliche Situationen modelliert werden.
Im dritten Teil wird die Berechnung des elektronischen Impulserwartungswerts innerhalb der BO Näherung untersucht. Dieser verschwindet innerhalb der BO Näherung, wenn man diesen direkt berechnet (Geschwindigkeitsform), während man über das Ehrenfest Theorem (Längenform) sehr gute Werte erhält.
Im vierten Teil wird eine neue Flussdichte, die Translationsflussdichte, vorgestellt. Diese ergibt sich aus der Überlegung, dass die Geschwindigkeitsform des Impulserwartungswerts durch die Wahrscheinlichkeitsflussdichte ausgedrückt werden kann. Demnach muss auch die Längenform einer Flussdichte entsprechen und man erhält die Translationsflussdichte.