Fakultät für Chemie und Pharmazie
Refine
Has Fulltext
- yes (46)
Is part of the Bibliography
- yes (46)
Year of publication
Document Type
- Doctoral Thesis (39)
- Journal article (4)
- Master Thesis (2)
- Preprint (1)
Keywords
- Elektrochemie (3)
- Polymere (3)
- Elektronentransfer (2)
- Femtosekundenspektroskopie (2)
- Lithium-Ionen-Akkumulator (2)
- Nanopartikel (2)
- Polyoxazoline (2)
- Tissue Engineering (2)
- Additive Fertigung (1)
- Adenomatous-polyposis-coli-Protein (1)
Institute
- Fakultät für Chemie und Pharmazie (46)
- Abteilung für Funktionswerkstoffe der Medizin und der Zahnheilkunde (10)
- Graduate School of Life Sciences (7)
- Institut für Pharmazie und Lebensmittelchemie (2)
- Fakultät für Physik und Astronomie (1)
- Graduate School of Science and Technology (1)
- Institut für Organische Chemie (1)
- Institut für Pharmakologie und Toxikologie (1)
- Klinik und Polikliniken für Zahn-, Mund- und Kieferkrankheiten (1)
- Theodor-Boveri-Institut für Biowissenschaften (1)
Sonstige beteiligte Institutionen
- Fraunhofer-Institut für Silicatforschung ISC (2)
- Fraunhofer Institute for Silicate Research ISC in Würzburg (1)
- Fraunhofer-Institut für Silicatforschung (ISC) in Würzburg (1)
- Institut für Optik und Atomare Physik, Technische Universität Berlin, 10623 Berlin, Germany (1)
- Laboratory for Chemistry and Life Science, Institute of Innovative Research, Tokyo Institute of Technology, Yokohama 226-8503, Japan (1)
- SKZ – Das Kunststoff-Zentrum (1)
ResearcherID
EU-Project number / Contract (GA) number
- 646737 (1)
The propagation of the genetic information into proteins is mediated by messenger- RNA (mRNA) intermediates. In eukaryotes mRNAs are synthesized by RNA- Polymerase II and subjected to translation after various processing steps. Earlier it was suspected that the regulation of gene expression occurs primarily on the level of transcription. In the meantime it became evident that the contribution of post- transcriptional events is at least equally important. Apart from non-coding RNAs and metabolites, this process is in particular controlled by RNA-binding proteins, which assemble on mRNAs in various combinations to establish the so-called “mRNP- code”.
In this thesis a so far unknown component of the mRNP-code was identified and characterized. It constitutes a hetero-trimeric complex composed of the Tudor domain-containing protein 3 (TDRD3), the fragile X mental retardation protein (FMRP) and the Topoisomerase III beta (TOP3β) and was termed TTF (TOP3β-TDRD3-FMRP) -complex according to its composition.
The presented results also demonstrate that all components of the TTF-complex shuttle between the nucleus and the cytoplasm, but are predominantly located in the latter compartment under steady state conditions. Apart from that, an association of the TTF-complex with fully processed mRNAs, not yet engaged in productive translation, was detected. Hence, the TTF-complex is a component of „early“ mRNPs.
The defined recruitment of the TTF-complex to these mRNPs is not based on binding to distinct mRNA sequence-elements in cis, but rather on an interaction with the so-called exon junction complex (EJC), which is loaded onto the mRNA during the process of pre-mRNA splicing. In this context TDRD3 functions as an adapter, linking EJC, FMRP and TOP3β on the mRNP. Moreover, preliminary results suggest that epigenetic marks within gene promoter regions predetermine the transfer of the TTF-complex onto its target mRNAs.
Besides, the observation that TOP3β is able to catalytically convert RNA-substrates disclosed potential activities of the TTF-complex in mRNA metabolism. In combination with the already known functions of FMRP, this finding primarily suggests that the TTF-complex controls the translation of bound mRNAs.
In addition to its role in mRNA metabolism, the TTF-complex is interesting from a human genetics perspective as well. It was demonstrated in collaboration with researchers from Finland and the US that apart from FMRP, which was previously linked to neurocognitive diseases, also TOP3β is associated with neurodevelopmental disorders. Understanding the function of the TTF-complex in mRNA metabolism might hence provide important insight into the etiology of these diseases.
Der Tumorsupressor APC ist in der Mehrzahl aller Fälle kolorektaler Karzinome bereits in
der initialen Phase der Karzinogenese mutiert. Diese Mutationen führen zu einer aberranten Aktivierung des Wnt-Signalweges sowie zu weiteren die Karzinogenese vorrantreibenden Aktivitäten, beispielsweise einem veränderten Migrationsverhalten. Dieser Dissertation
zu Grunde liegt die Idee, dass durch die Trunkierung des APC-Proteins aber auch Abhängigkeiten von Genaktivitäten entstehen, die zuvor entbehrlich waren. Solche synthetisch
letalen Gene sollten in einem high-content shRNA-Screen gefunden werden.
Für die Durchführung des Screens wurde ein von der SW480 Kolonkarzinomzelllinie
abgeleitetes, isogenes Zellsystem generiert, welches durch Induktion mit Doxyzyklin das
vollständige APC-Allel (FL-APC) exprimiert. Infolge dieser Expression zeigen die Zellen
einen weniger malignen Phänotyp. Dies spiegelt sich darin wider, dass die Zellen durch
FL-APC Expression in ihrer Wnt-Signalwegsaktivität eingeschränkt werden. Doxyzyklininduzierte Zellen sind schlechter in der Lage ohne Adhäsion zu proliferieren als nicht induzierte Zellen. Andererseits ist ihre Fähigkeit einem FKS-gradienten entlang zu migrieren
verbessert.
Der shRNA-Screen wurde mit der Decipher shRNA-Bibliothek durchgeführt. Diese
enthält 27.500 verschiedene shRNAs mit Interferenzaktivität gegen 5.000 mRNAs, die potentiell pharmakologisch inhibierbare Proteine kodieren. Die besten zwei Kandidaten für
eine synthetisch letale Interaktion mit trunkiertem APC, BCL2L1 und EIF2B5 wurden im
Verlauf einer Masterarbeit bzw. direkt in dieser Disseration validiert. EIF2B5 zeigte in vitro nach Depletion durch unterschiedliche shRNAs einen di erentiellen Proliferationse ekt
bei FL-APC induzierten im Vergleich zu kontrollbehandelten Zellen. Dieser di erentielle
E ekt konnte in einem weiteren Modellsystem, SW480 Zellen mit konstitutiver FL-APC
Expression, ebenfalls validiert werden.
Durch Expression einer shRNA mit Aktivität gegen EIF2B5 werden in beiden Zellsystem die unfolded protein response (UPR) Gene DDIT3 und splXBP1 aktiviert. Interessanterweise werden durch die Expression von FL-APC diese Gene reprimiert. Im Promotor
der EIF2B5-mRNA be ndet sich eine Bindestelle für MYC. Es ist denkbar, dass durch die
Expression von FL-APC eine globale Veränderung der Genexpression vorgenommen wird,
die einerseits eine Repression von EIF2B5 nach sich zieht aber andererseits eine hierdurch
ausgelöste ER-Stress Antwort verhindert. Eine Inhibition von EIF2B5 ohne diese Adaption
andererseits führt nach diesem Model zu einer UPR-aktivierten Apoptose.
In einem zweiten Projekt wurde das überraschende Verhalten von Kolonkarzinomzellen untersucht, die nach Zugabe von BEZ235, einem dualen PI3K/mTOR Inhibitor, trotz
gegenteiliger Erwartungen MYC-Proteinmengen erhöhen. Eine Repression wurde erwar-
tet, weil die Inhibition von PI3K einerseits zu einer proteasomalen Destabiliserung und
andererseits die mTOR Inhibition zu einer verringerten Synthese von MYC führen sollte.
Während bereits gezeigt werden konnte, dass durch einen FOXO-vermittelten Mechanismus MAPK-abhängig die MYC-Expression verstärkt wird, wurde in dieser Dissertation
die erwartete Translationsinhibition untersucht. BEZ235 inhibiert zwar CAP-abhängige
Translation, das MYC Protein wird jedoch aufgrund einer IRES-vermittelten Translation
weiterhin exprimiert. Silvestrol, ein Inhibitor der Helikase eIF4A andererseits interveniert
mit CAP- und IRES-abhängiger Translation und kann die MYC-Proteinkonzentrationen
verringern. Wir konnten zudem feststellen, dass die Applikation von Silvestrol auch in vivo
möglich und wirksam ist und zudem tolleriert wird. Dies gibt Anlass zur Ho nung, dass
eine Intervention der Translation auch im Menschen eine valide Strategie zur Behandlung
MYC-getriebener Tumore sein könnte.
Influence of Carbon Additives on the Electrochemical Performance of Modern Lead-Acid Batteries
(2023)
In the first part of this thesis, a validation of both short-term and long-term DCA tests on 2 V laboratory cells is focussed. The aim is to improve the laboratory cell level measurement technology for dynamic charge acceptance regarding the investigation of carbon additives. To address this issue, it is crucial to apply carbon additives generating a remarkable difference in charge acceptance. For this purpose, five different carbon additives providing a variation in the specific external surface were included as additives in the negative plates of 2 V lead-acid cells. Both short-term (charge acceptance test 2 from SBA and DCA from EN) and long-term (Run-in DCA from Ford) DCA tests were executed on the lead-acid cells. Further understanding of the mechanism was studied by applying electrochemical methods like cyclic voltammetry and electrochemical impedance spectroscopy.
The second part of this thesis aims to understand the impact of carbon surface functional groups on the electrochemical activity of the negative electrodes as well as the DCA of 2 V lead-acid cells. In order to address this topic, commercially available activated carbon was modified by different chemical treatments to incorporate specific surface functional groups in the carbon structure. A series of activated carbons having a broad range of pH was prepared, which were used as additives in the negative electrodes. The corresponding lead-acid cells were subjected to cyclic voltammetry and DCA test according to EN. Further, the physical and chemical properties of the functionalized carbon additives were intensively analyzed to establish a structure-property relationship with a focus on DCA.
This work introduced the reader to all relevant fields to tap into an ultrasound-based state of charge estimation and provides a blueprint for the procedure to achieve and test the fundamentals of such an approach. It spanned from an in-depth electrochemical characterization of the studied battery cells over establishing the measurement technique, digital processing of ultrasonic transmission signals, and characterization of the SoC dependent property changes of those signals to a proof of concept of an ultrasound-based state of charge estimation.
The State of the art & theoretical background chapter focused on the battery section on the mechanical property changes of lithium-ion batteries during operation. The components and the processes involved to manufacture a battery cell were described to establish the fundamentals for later interrogation. A comprehensive summary of methods for state estimation was given and an emphasis was laid on mechanical methods, including a critical review of the most recent research on ultrasound-based state estimation. Afterward, the fundamentals of ultrasonic non-destructive evaluation were introduced, starting with the sound propagation modes in isotropic boundary-free media, followed by the introduction of boundaries and non-isotropic structure to finally approach the class of fluid-saturated porous media, which batteries can be counted to. As the processing of the ultrasonic signals transmitted through lithium-ion battery cells with the aim of feature extraction was one of the main goals of this work, the fundamentals of digital signal processing and methods for the time of flight estimation were reviewed and compared in a separate section.
All available information on the interrogated battery cell and the instrumentation was collected in the Experimental methods & instrumentation chapter, including a detailed step-by-step manual of the process developed in this work to create and attach a sensor stack for ultrasonic interrogation based on low-cost off-the-shelf piezo elements.
The Results & discussion chapter opened with an in-depth electrochemical and post-mortem interrogation to reverse engineer the battery cell design and its internal structure. The combination of inductively coupled plasma-optical emission spectrometry and incremental capacity analysis applied to three-electrode lab cells, constructed from the studied battery cell’s materials, allowed to identify the SoC ranges in which phase transitions and staging occur and thereby directly links changes in the ultrasonic signal properties with the state of the active materials, which makes this work stand out among other studies on ultrasound-based state estimation. Additional dilatometer experiments were able to prove that the measured effect in ultrasonic time of flight cannot originate from the thickness increase of the battery cells alone, as this thickness increase is smaller and in opposite direction to the change in time of flight. Therefore, changes in elastic modulus and density have to be responsible for the observed effect.
The construction of the sensor stack from off-the-shelf piezo elements, its electromagnetic shielding, and attachment to both sides of the battery cells was treated in a subsequent section. Experiments verified the necessity of shielding and its negligible influence on the ultrasonic signals. A hypothesis describing the metal layer in the pouch foil to be the transport medium of an electrical coupling/distortion between sending and receiving sensor was formulated and tested. Impedance spectroscopy was shown to be a useful tool to characterize the resonant behavior of piezo elements and ensure the mechanical coupling of such to the surface of the battery cells. The excitation of the piezo elements by a raised cosine (RCn) waveform with varied center frequency in the range of 50 kHz to 250 kHz was studied in the frequency domain and the influence of the resonant behavior, as identified prior by impedance spectroscopy, on waveform and frequency content was evaluated to be uncritical. Therefore, the forced oscillation produced by this excitation was assumed to be mechanically coupled as ultrasonic waves into the battery cells.
The ultrasonic waves transmitted through the battery cell were recorded by piezo elements on the opposing side. A first inspection of the raw, unprocessed signals identified the transmission of two main wave packages and allowed the identification of two major trends: the time of flight of ultrasonic wave packages decreases with the center frequency of the RCn waveform, and with state of charge. These trends were to be assessed further in the subsequent sections. Therefore, methods for the extraction of features (properties) from the ultrasonic signals were established, compared, and tested in a dedicated section. Several simple and advanced thresholding methods were compared with envelope-based and cross-correlation methods to estimate the time of flight (ToF). It was demonstrated that the envelope-based method yields the most robust estimate for the first and second wave package. This finding is in accordance with the literature stating that an envelope-based method is best suited for dispersive, absorptive media [204], to which lithium-ion batteries are counted. Respective trends were already suggested by the heatmap plots of the raw signals vs. RCn frequency and SoC. To enable such a robust estimate, an FIR filter had to be designed to preprocess the transmitted signals and thereby attenuate frequency components that verifiably lead to a distorted shape of the envelope.
With a robust ToF estimation method selected, the characterization of the signal properties ToF and transmitted energy content (EC) was performed in-depth. A study of cycle-to-cycle variations unveiled that the signal properties are affected by a long rest period and the associated relaxation of the multi-particle system “battery cell” to equilibrium. In detail, during cycling, the signal properties don’t reach the same value at a given SoC in two subsequent cycles if the first of the two cycles follows a long rest period. In accordance with the literature, a break-in period, making up for more than ten cycles post-formation, was observed. During this break-in period, the mechanical properties of the system are said to change until a steady state is reached [25]. Experiments at different C-rate showed that ultrasonic signal properties can sense the non-equilibrium state of a battery cell, characterized by an increasing area between charge and discharge curve of the respective signal property vs. SoC plot. This non-equilibrium state relaxes in the rest period following the discharge after the cut-off voltage is reached. The relaxation in the rest period following the charge is much smaller and shows little C-rate dependency as the state is prepared by constant voltage charging at the end of charge voltage. For a purely statistical SoC estimation approach, as employed in this work, where only instantaneous measurements are taken into account and the historic course of the measurement is not utilized as a source of information, the presence of hysteresis and relaxation leads to a reduced estimation accuracy. Future research should address this issue or even utilize the relaxation to improve the estimation accuracy, by incorporating historic information, e.g., by using the derivative of a signal property as an additional feature. The signal properties were then tested for their correlation with SoC as a function of RCn frequency. This allowed identifying trends in the behavior of the signal properties as a function of RCn frequency and C-rate in a condensed fashion and thereby enabled to predict the frequency range, about 50 kHz to 125 kHz, in which the course of the signal properties is best suited for SoC estimation.
The final section provided a proof of concept of the ultrasound-based SoC estimation, by applying a support vector regression (SVR) to before thoroughly studied ultrasonic signal properties, as well as current and battery cell voltage. The included case study was split into different parts that assessed the ability of an SVR to estimate the SoC in a variety of scenarios. Seven battery cells, prepared with sensor stacks attached to both faces, were used to generate 14 datasets. First, a comparison of self-tests, where a portion of a dataset is used for training and another for testing, and cross-tests, which use the dataset of one cell for training and the dataset of another for testing, was performed. A root mean square error (RMSE) of 3.9% to 4.8% SoC and 3.6% to 10.0% SoC was achieved, respectively. In general, it was observed that the SVR is prone to overestimation at low SoCs and underestimation at high SoCs, which was attributed to the pronounced hysteresis and relaxation of the ultrasonic signal properties in this SoC ranges. The fact that higher accuracy is achieved, if the exact cell is known to the model, indicates that a variation between cells exists. This variation between cells can originate from differences in mechanical properties as a result of production variations or from differences in manual sensor placement, mechanical coupling, or resonant behavior of the ultrasonic sensors. To mitigate the effect of the cell-to-cell variations, a test was performed, where the datasets of six out of the seven cells were combined as training data, and the dataset of the seventh cell was used for testing. This reduced the spread of the RMSE from (3.6 - 10.0)% SoC to (5.9 – 8.5)% SoC, respectively, once again stating that a databased approach for state estimation becomes more reliable with a large data basis. Utilizing self-tests on seven datasets, the effect of additional features on the state estimation result was tested. The involvement of an additional feature did not necessarily improve the estimation accuracy, but it was shown that a combination of ultrasonic and electrical features is superior to the training with these features alone. To test the ability of the model to estimate the SoC in unknown cycling conditions, a test was performed where the C-rate of the test dataset was not included in the training data. The result suggests that for practical applications it might be sufficient to perform training with the boundary of the use cases in a controlled laboratory environment to handle the estimation in a broad spectrum of use cases.
In comparison with literature, this study stands out by utilizing and modifying off-the-shelf piezo elements to equip state-of-the-art lithium-ion battery cells with ultrasonic sensors, employing a range of center frequencies for the waveform, transmitted through the battery cell, instead of a fixed frequency and by allowing the SVR to choose the frequency that yields the best result. The characterization of the ultrasonic signal properties as a function of RCn frequency and SoC and the assignment of characteristic changes in the signal properties to electrochemical processes, such as phase transitions and staging, makes this work unique. By studying a range of use cases, it was demonstrated that an improved SoC estimation accuracy can be achieved with the aid of ultrasonic measurements – thanks to the correlation of the mechanical properties of the battery cells with the SoC.
Over the last decades, lithium-ion batteries have grown more important and substituted other energy storage systems. Due to advantages such as high energy density and low self-discharge, the lithium-ion battery has taken its part in the rechargeable energy storage market, and it is now found in most laptops, cameras and mobile phones. With the increasing demands for electrical vehicles and stationary energy storage systems, there is a necessity for improved lithium-ion battery materials.
In this thesis several alternative electrode materials have been examined with a main focus on the electrochemical characterisation. As an alternative to the commercial cathode LiCoO2, the LiMn2O4 cathode has been suggested due to its reduced toxicity, material abundance, reduced costs and increased specific capacity. On the anode side, several Sn-containing anodes have been investigated and steps to overcome the main challenge, the great volume expansion upon cycling, have been taken. In addition, a novel anode material group was synthesised at the University of Marburg and two substances of the lithium chalcogenidometalate networks were successfully characterised.
The cathode material, LiMn2O4, was synthesised via the sol-gel technique and several coating methods such as dip-coating, electrophoretics and infiltration were investigated. The LiMn2O4 material was initially coated on a porous metal foam as a current collector, thus providing new possibilities as the porosity of the substrate increased, mechanical stability and adhesion improved and a 3-dimensional network was obtained. In order to compare the results of the LiMn2O4 cathode material on the novel current collector, the material was also coated on a standard metallic foil and characterised. The analysis followed via X-ray diffraction, electron microscopy, thermogravimetrical analysis and several electrochemical techniques.
Tin containing anode materials were chosen due to the doubling of the theoretical capacity compared with the commercially used graphite. However, a great challenge lies with using tin or tin-containing anode materials. Upon lithiation of Sn, the material can expand up to 300 %, therefore a stabilising effect is necessary to avoid a collapse of the material. This work shows several new concepts and attempts to overcome this challenge, including SnO2 nanowires deposited via chemical vapour deposition on both metallic foam and standard current collectors. A new improvement consisted of the tin - carbon nanofibers where the nanofibers form a
stabilising matrix that can partially buffer the volume change of the Sn particles. The synthesis of the Sn-containing anodes took place at the University of Cologne, while characterisation, cell preparation and optimising the electrode system were features of this thesis.
In addition, a lithium chalcogenidometalate network proved to be an interesting, new anode material group. Both Li4MnSn2Se7 and Li4MnGe2S7 (synthesised at Philipps-Universität Marburg) were electrochemically examined to better understand the lithiation processes. Both materials obtained very high specific capacities and were found to be possible alternatives to the state-of-the art anodes. All the examined electrode materials were found to have some advantage over the commercially used LiCoO2 and graphite electrodes, and a thorough characterization of the materials was performed to understand the processes that took place.
In this work, the influence of aromatic structures on drug encapsulation, self-assembly and hydrogel formation was investigated. The physically crosslinked gelling systems were characterized and optimized for the use in biofabrication and applied in initial (bio)printing experiments.
Chapter I: The cytocompatible (first in vitro and in vivo studies) amphiphile PMeOx-b-PBzOx-b- PMeOx (A-PBzOx-A) was used for the solubilization of PTX, schizandrin A (SchA), curcumin (CUR), niraparib and HS-173.
Chapter II: Compared to the polymers A-PPheOx-A, A-PBzOx-A and A-PBzOzi-A, only the polymer A-PPheOzi-A showed a reversible temperature- and concentration-dependent inverse thermogelation, which is accompanied by a morphology change from long wormlike micelles in the gel to small spherical micelles in solution. The worm formation results from novel interactions between the hydrophilic and hydrophobic aromatic polymer blocks. Changes in the hydrophilic block significantly alter the gel system. Rheological properties can be optimized by concentration and temperature, which is why the hydrogel was used to significantly improve the printability and stability of Alg in a blend system.
Chapter III: By extending the side chain of the aromatic hydrophobic block, the inverse thermogelling polymer A-poly(2-phenethyl-2-oxazoline)-A (A-PPhenEtOx-A) is obtained. Rapid gelation upon cooling is achieved by inter-correlating spherical micelles. Based on ideal rheological properties, first cytocompatible bioprinting experiments were performed in combination with Alg. The polymers A- poly(2-benzhydryl-2-oxazoline)-A (A-PBhOx-A) and A-poly(2-benzhydryl-2-oxazine) (A-PBhOzi-A) are characterized by two aromatic benzyl units per hydrophobic repeating unit. Only the polymer A- PBhOzi-A exhibited inverse thermogelling behavior. Merging micelles could be observed by electron microscopy. The system was rheologically characterized and discussed with respect to an application in 3D printing.
Chapter IV: The thermogelling POx/POzi system, in particular the block copolymer PMeOx-b- PnPrOzi, was used in different applications in the field of biofabrication. The introduction of maleimide and furan units along the hydrophilic polymer part ensured additional stabilization by Diels-Alder crosslinking after the printing process.
The present work builds on a conjugated electrochromic polymer with a highly transmissive and colorless bright state and its application in electrochromic devices. The main body of this work focuses on the investigation of the influence of moisture on electrochromic devices and solutions to overcome possible degradation of these devices due to moisture ingress.
Firstly, a series of EDOT derivatives with a terminal double bond in the lateral sidechain to potentially achieve a highly transmissive and fully colorless bright state was investigated. All of the EDOT derivatives were electrochemically polymerized and characterized by means of (in-situ) spectroelectrochemistry. The results highlight the dramatic influence of the terminal double bond on the improved visible light transmittance and color neutrality in the bright state. After detailed evaluation and comparison, the best performing compound, which contains a hexenyl sidechain (PEDOT-EthC6), was scaled-up by changing the deposition technique from an electrochemical to a chemical in-situ polymerization process on a R2R-pilot line in an industrially relevant environment. The R2R-processed PEDOTEthC6 half-cells were characterized in detail and provide enhanced electrochromic properties in terms of visible light transmittance and color neutrality in the bright state as well as short response times, improved contrast ratio, coloration efficiency and cycling stability (10 000 cycles).[21]
In a second step, the novel PEDOT-EthC6 electrochromic polymer was combined with a Prussian Blue counter electrode and a solid polymer electrolyte to form an all-solid-sate ECDs based on complementary switching electrodes and PET-ITO as flexible substrates. The fabricated ECDs were optically and spectroelectrochemically characterized. Excellent functionality of the S2S-processed flexible ECDs was maintained throughout 10 000 switching cycles under laboratory conditions. The ECDs offer enhanced electrochromic properties in terms of visible light transmittance change and color neutrality in the bright state as well as contrast ratio, coloration efficiency, cycling stability and fast response times. Furthermore, the final device assembly was transferred from a S2S-process to a continuous R2R-lamination process.[238]
In a third step, the PEDOT-EthC6/PB-based ECDs were submitted to conscious environmental aging tests. The emphasis of the research presented in this work, was mainly put at the influence of moisture and possible failure mechanisms regarding the PEDOT-EthC6/PB based ECDs. An intense brown coloration of the electrodes was observed while cycling the ECDs in humid atmospheres (90% rH) as a major degradation phenomenon. The brown coloration and a thereby accompanied loss of conductivity of the PET-ITO substrates was related to significant degradation of the ITO layers, inserted as the conductive layers in the flexible ECDs. A dissolution of the ITO thin films and formation of metallic indium particles on the surface of the ITO layers was observed that harmed the cycling stability enormously. The conductive layers of the aged ECDs were investigated by XRD, UV-Vis, SEM and spectroelectrochemical measurements and validated the supposed irreversible reduction of the ITO layers.[279]
In the absence of reasonable alternatives to PET-ITO for flexible (R2R-processed) ECDs, it is also important to investigate measures to avoid the degradation of ECDs. This is primarily associated with the avoidance of appropriate electrode potentials necessary for ITO reduction in humid atmospheres. As an intrinsic action point, the electrode potentials were investigated via electrochemical measurements in a three-electrode setup of an all-solid-state ECD. Extensive knowledge on the electrode potentials allowed the voltage-induced degradation of the ITO in flexible ECDs to be avoided through the implementation of an unbalanced electrode configuration (charge density ratio of working and counter electrode). It was possible to narrow the overall operational voltage window to an extent in which irreversible ITO reduction no longer occurs. The unbalanced electrode configuration lead to an improved cycling stability without harming other characteristics such as response time and light transmittance change and allows ECD operation in the presence of humidity.[279]
The avoidance of the mentioned degradation phenomena is further associated with appropriate sealing methods and materials as well as appropriate electrode and device fabrication processes. Since a variety of sealing materials is commercially available, due to the commercial launch of organic photovoltaic (OPV) and light emitting diodes (OLEDs), the focus in the present work was put to water-free electrode fabrication. As an extrinsic action point, a novel preparation method of a nanoscale PEDOT-EthC6 dispersion based on organic solvents is presented here in a final step. The water-free processing method gives access to straightforward printing and coating processes on flexible PET-ITO substrates and thus represents a promising and simplified alternative to the established PEDOT:PSS. The resulting nano-PEDOT-EthC6 thin films exhibit enhanced color neutrality and transmissivity in the bright state and are comparable to the properties of the in-situ polymerized PEDOT-EthC6 thin films.[280]
Opioid receptors (ORs) are among the most intensively studied members of the G protein-coupled receptor (GPCR) family due to their important role in pain management and their involvement in psychological and neurological disorders. However, currently available opioid drugs exhibit both serious drawbacks, such as addiction, and life-threatening side effects, such as respiratory depression. Contrary to the classic monomeric model, indirect evidence suggests that ORs might form dimers, which could be endowed with a distinct pharmacological profile, and, thus, be exploited to develop innovative drugs. However, direct evidence for the spontaneous formation of OR dimers in living cells under physiological condition are missing. The focus of this thesis was the design, synthesis and characterization of new, highly subtype-selective OR fluorescent ligands to be used as tools for state-of-the-art microscopy methods, such as single molecule microscopy (SMM), in heterologous cells and potentially in native tissue, in order to investigate OR organization and mobility on the surface of intact, living cells, at low/physiological expression levels.
The μOR is the OR subtype which plays the most critical role in pain modulation, while mediating the effects of the most powerful analgesic drugs. Also, it is the OR subtype which is mostly responsible for the major adverse effects of the currently marketed opioid drugs. We aimed to develop a new μOR-selective fluorescent ligand with a potential irreversible binding mode. Although the approach was in principle successful, i.e. the labelled cells were visible and distinguishable; this initial attempt was not suitable for SMM due to the ligands’ poor selectivity and affinity as well as due to its high background noise. A second generation of the fluorescent ligand was designed; however the synthesis and characterization are part of another doctoral thesis.
Lately, δOR has received attention as a promising drug target, due to its distinct pharmacological profile which features low abuse liability and lack of physical dependence. In addition, δOR expression has been associated with cancer regulation in the periphery, thus further highlighting the interest of imaging tools for this receptor. In this thesis, the development and characterization of two new δOR-selective fluorescent probes with excellent optical properties, based on the well-studied ligand naltrindole (NTI) is presented. Their application in SMM studies is currently underway at the group of Prof. Dr. Davide Calebiro at the University of Birmingham.
The κOR is a subtype which has also emerged as a drug target due to its low abuse potential. Despite a growing interest in this receptor, κOR-selective fluorescent probes have been particularly scarce in literature. Herein, the design, synthesis and characterization of the first reported set of fluorescent κOR-selective probes with antagonistic properties, based on the established ligand 5’-guanidinonaltrindole (5’-GNTI) is presented. Two of these were employed for SMM experiments to investigate κOR homodimerization, localization and trafficking. Our findings do not support homodimerization of the κOR-bound probe complexes, while showing that the majority of them follow a normal Brownian diffusion on the cell surface.
Parallel polar dimers in the columnar self‐assembly of umbrella‐shaped subphthalocyanine mesogens
(2021)
The self-assembly of umbrella-shaped mesogens is explored with subphthalocyanine cores and oligo(thienyl) arms with different lengths in the light of their application as light-harvesting and photoconducting materials. While the shortest arm derivatives self-assemble in a conventional columnar phase with a single mesogen as a repeating unit, the more extended derivatives generate dimers that pile up into liquid crystalline columns.
In contrast to the antiparallel arrangement known from single crystals, the present mesogens align as parallel dimers in polar columnar phases as confirmed by X-ray scattering, experimental densities, dielectric spectroscopy, second harmonic generation, alignment, and conductivity studies.
UV–vis and fluorescence spectroscopies reveal a broad absorption in the visible range and only weak emission of the Q-band. Thus, these light-collecting molecules forming strongly polar columnar mesophases are attractive for application in the area of photoconductive materials.
Rekonstitution des Chromophors und der Funktion von Bakteriorhodopsin aus Halobacterium halobium
(1976)
Ein Modell der lichtgetriebenen Protonenpumpe Bakteriorhodopsin postulierte die direkte Beteiligung der Wasserstoffe in der 4-Stellung des Cyclohexenringes des Retinalchromophors an dem Vorgang der Protonenverschiebung. Mittels Blockaden der Retroform-Bildung von Retinal durch chemische Modifizierungen des Cyclohexenringes (4-Hydroxy-Retinal, 5,6-Epoxy-Retinal) konnten nach Einbau der modifizierten Moleküle in die isolierte Purpurmembran und nach Zugabe zu Halobakterien mit unterdrückter Retinalsynthese die direkte Beteiligung des Cyclohexenringes an der Protonenpumpe mit großer Wahrscheinlichkeit ausgeschlossen werden.