Institut für Pharmazie und Lebensmittelchemie
Refine
Has Fulltext
- yes (18)
Is part of the Bibliography
- yes (18)
Year of publication
- 2019 (18) (remove)
Document Type
- Doctoral Thesis (18) (remove)
Keywords
- Chromatographie (2)
- HPLC (2)
- antibiotics (2)
- African Trypanosomiasis (1)
- Akt (1)
- Antibiotikum (1)
- Antikörper (1)
- Arzneimittel (1)
- Arzneimitteldesign (1)
- Bioverfügbarkeit (1)
Einhergehend mit einer steigenden Lebenserwartung nimmt auch die Zahl der am Multiplen Myelom Erkrankten zu. Bis dato gibt es nur wenige Therapieansätze dieser selten vorkommenden Blutkrebserkrankung. Im Zusammenhang mit der Entstehung des Multiplen Myeloms stehen vor allem zwei bedeutende Hitzeschockproteine: Hsp90 und Hsp70. Beide haben die Aufgabe, Zellen vor Apoptose zu schützen. In proliferierenden Plasmazellen ist eine Überexpression an Hsp90 zu beobachten. Entwickelte Inhibitoren führten zwar zu einer verminderten Hsp90-Aktivität, allerdings wurde diese durch eine vermehrte Expression von Hsp70 kompensiert, weshalb Myelomzellen weiterhin proliferierten. Aus diesem Grund bietet sich Hsp70 als weiterer Angriffspunkt in der Therapierung des Multiplen Myeloms an. Die bislang entwickelten Inhibitoren binden entweder an die Nukleotid- oder Substratbindedomäne. Da beide Stellen unspezifisch sind, wurden durch virtuelles Screening potenzielle Inhibitoren für Hsp70 identifiziert, welche in vitro und in vivo tatsächlich Effekte hinsichtlich der Herunterregulierung von Hsp70 zeigten. Ob die entwickelten Substanzen jedoch direkt an Hsp70 binden, war die Fragestellung der vorliegenden Arbeit.
In dieser Arbeit wurde untersucht, inwiefern die entwickelten Inhibitoren an Hsp70 binden und dieses inhibieren. Die humane Hsp70-Familie besitzt sechzehn Mitglieder, die alle ähnliche Aufgaben und Strukturmerkmale aufweisen. Für die durchgeführten Versuche wurde die Hsp70-Isoform Hsc70 verwendet. In einem Protein-Ligand-Assay konnte gezeigt werden, dass die meisten Verbindungen durch Aggregatbildung zu einer Inhibition von Hsc70 führten. Durch Zugabe von Detergenz konnten die gebildeten Aggregate aufgebrochen und so der Inhibitionseffekt aufgehoben bzw. deutlich reduziert werden. Damit konnte gezeigt werden, dass die in Zell- und Mausversuchen beobachteten Effekte vermutlich nicht auf eine direkte Inhibition von Hsc70 zurückzuführen sind. Ob diese Effekte nun ebenfalls auf Aggregatbildung beruhen oder aber ein anderes Protein als das vermutete Hsc70 inhibiert wird, was über eine Signalkaskade zur Inhibition von Hsc70 führt, wäre eine interessante Fragestellung für weitere Untersuchungen.
Da sowohl in NMR-Versuchen als auch dem durchgeführten Protein-Ligand-Assay gezeigt werden konnte, dass die vormals als potenzielle Inhibitoren entwickelten Verbindungen nur schwach aktiv sind, wurde durch Fragment-basierte Ansätze eine andere Bindestelle für mögliche Inhibitoren identifiziert. Hierbei konnte N-Acetyl-D-Glucosamin in der Nukleotidbindedomäne von Hsc70 detektiert werden. Hieraus könnten sich neue Ansätze zur Entwicklung neuartiger in silico entwickelter Hsc70-Inhibitoren ergeben.
Ausgangspunkt für die Docking-Studien zur Entwicklung neuer Hsp70-Inhibitoren war die Kristallstruktur von bHsc70 ED 1-554, einer trunkierten Doppelmutante des nativen Hsc70. Bis dato ist diese 554 Aminosäuren umfassende Mutante die einzige Hsc70-Variante von der die Zweidomänenstruktur kristallisiert werden konnte. Für dieses Konstrukt wurde zunächst ein optimiertes Aufreinigungsprotokoll entwickelt, um dann Kristallisationsversuche mit ausgewählten AH-Verbindungen, die in den Docking-Studien entwickelt wurden, durchzuführen. Hierbei konnte jedoch keine Bindung festgestellt werden. Die Kristallisation mit Ver-155008, einem bekannten Hsc70-Inhibitor, führte jedoch zur ersten Zweidomänenstruktur von Hsc70 mit gebundenem Ver-155008.
Neben der obigen Fragestellung wurde außerdem untersucht, wie funktional aktiv das trunkierte Hsc70-Konstrukts ist. Hier zeigte sich, dass aufgrund des fehlenden C-Terminus zwar eine geringe Aktivität von 30 % im Vergleich zur Volllänge zu beobachten war. Für eine nahezu vollständige Rückfaltungsaktivität ist aber der C-Terminus essentiell. Weiterhin konnte in ITC-Versuchen der Kd-Wert von Ver-155008 an die verwendete Mutante ermittelt werden, der dem bereits bekannten Kd von Ver-155008 an das native Hsc70 ähnlich ist.
Die Infektion mit dem Masernvirus (MV) stellt weltweit immer noch ein großes Problem dar. Trotz des vorhandenen Lebendimpfstoffs, der eine Erkrankung sicher zu verhindern vermag, haben nicht nur die Entwicklungsländer, in denen ein flächendeckender Impfschutz schwieriger zu erreichen ist, mit der Erkrankung und ihren Komplikationen zu kämpfen. Hat sich die Erkrankung klinisch manifestiert gibt es keine kausalen Therapiemöglichkeiten und es kann nur noch symptomatisch behandelt werden. Dies ist v.a. auch in Hinblick auf die schweren Komplikationen der Maserninfektion von Bedeutung. Bei Erstkontakt mit dem Masernvirus ist die Suszeptibilität nicht geimpfter Menschen sehr hoch. Das bedeutet, dass es in 95-98 % der Fälle nach einer Infektion mit dem Masernvirus auch zum klinischen Bild der Masern kommt, unabhängig von Alter und Geschlecht. Das Ziel dieser Arbeit war es daher, potentielle Hemmstoffe der Maserninfektion auf ihre Wirkung zu testen und zu verstehen, wo im Infektions- und Replikationszyklus des MV sie eingreifen. Es wurden eine Reihe Substanzen mit potentiell-inhibitorischen Eigenschaften in Infektions-Hemmtests und im Zytotoxizitätstest untersucht, von denen im Anschluss die drei besten Inhibitoren (JK80, QD6-8 und Droseron) weiter untersucht wurden. JK80 und QD6-8 waren beide mit IC50-Werten um 30 µM und SI-Werten von über 2 nur mäßig spezifisch antiviral wirksam. Während JK80 vermutlich den Eintritt des MV in die Zellen verhindert, hemmt QD6-8 die intrazelluläre Virusreplikation und wäre im Hinblick auf die Entwicklung neuartiger, spezifischer Medikamente gegen die Maserninfektion von grossem Interesse. Eine Zielmolekülanalyse der Substanz und die Testung anderer Derivate könnten Aufschluss darüber geben, wie Substanzen aussehen müssten, die eine spezifische Hemmung der intrazellulären Replikation bewirken können. Der Naturstoff Droseron könnte mit einer spezifischen Hemmung (IC50 ca. 10 µM; SIWert 6 im Fluoreszenzreader, bzw. IC50 ca. 2 µM; SI-Wert 30 in der Titration) eine mögliche Leitsubstanz für einen neuen MV-Inhibitor darstellen. Allerdings waren alle bisher getesteten Droseron-Derivate entweder weniger inhibitorisch wirksam oder deutlich zytotoxischer als Droseron selbst. Die Ergebnisse der Infektionshemmversuche mit Zugabe von Droseron vor, während oder nach der Infektion mit MV sprechen dafür, dass Droseron den Eintritt des Virus in die Zelle stört.
Two chiral chemical molecules being mirror images of each other, also referred to as enantiomers, may have different pharmacokinetic, pharmacodynamic, and toxicological effects. Thus, pharmaceutical manufacturers and authorities are increasingly interested in the approval of enantiopure drugs. However, the isomeric purity and the limits for isomeric impurities have to be specified applying enantioselective analytical methods, such as capillary electrophoresis.
The separation of enantiomers in capillary electrophoresis may be improved by the addition of ionic liquids to the background electrolyte. The aim of this work was to investigate the influence of different separation conditions on the enantioseparation of phenethylamines in background electrolytes containing ionic liquids based on tetrabutylammonium cations.
Best chiral separations were achieved at acidic pH values using phosphate buffers containing 125 mmol/L tetrabutylammonium based salts. Different reasons explaining enhanced enantioseparations in buffers containing ionic liquids were found. First, due to an improvement of the cyclodextrin solubility, the addition of ionic liquids to the background electrolyte enables the use of higher concentrations of these chiral selector. Furthermore, the adsorption of tetrabutylammonium cations to the negatively charged capillary surface results in a reduction of the electroosmotic flow. Hence, the resulting prolongation of migration times leads to a longer period of time for the separation of temporarily formed diastereomeric analyte cyclodextrin complexes, which yields improved enantioseparation. Additionally, due to a decrease of the adsorption of positively charged phenethylamine analyte molecules to capillary surface silanol groups, the adsorption of ionic liquid cations inhibits peak broadening. A further reason explaining an enhanced enantioseparation by the addition of ionic liquids to the background electrolyte is a competition between tetrabutylammonium cations and analyte enantiomers for the inclusion into cyclodextrin cavities.
Furthermore, the influence of different chiral counterions, combined with tetrabutylammonium cations, on the enantioseparation of phenethylamines was investigated. Solely anions based on the basic proteinogenic amino acids L lysine and L arginine yielded chiral separation results superior to those achieved using achiral tetrabutylammonium chloride as background electrolyte additive. Especially the application of tetrabutylammonium L argininate gave very good enantioseparations of all investigated ephedrine derivatives, which might be explained by the ability of L arginine to affect the formation of complexes between analytes and cyclodextrins.
Besides the investigation of the influence of ionic liquids on the enantioseparation, complexes between phenethylamine enantiomers and β cyclodextrin derivatives were characterized by affinity capillary electrophoresis. The binding constants between analyte enantiomers and cyclodextrins and the electrophoretic mobilities of the temporarily formed complexes were determined and compared to the observed chiral resolution values. While neither the calculated binding constants nor their differences correlated with the quality of the enantioseparation, a strong correlation between the differences of the electrophoretic mobilities of the complexes and the chiral resolution values was found.
Upon approval of a drug, the stability of the API and the FPP has to be studied intensively because it determines the shelf-life. If a drug is found to be stable, the expiry date is arbitrary set to five years at the maximum, if a drug tends to undergo degradation, the expiry date is set shorter. The drug product must comply with predefined specifications in accordance with the ICH guidelines Q6A and Q6B during its entire market life. The content of the active substance is required to be within a specification of 95–105% of its labeled claim until expiry corresponding to the ICH guideline Q1A(R2). However, there is little or scattered literature information addressing the stability of drug products beyond their expiry dates. The objective of this thesis was to study and assess the long-term stability of a collection involving numerous pure drug substances and ampoules manufactured in the 20th century. The content and the impurity profile were examined by means of appropriate analytical methods, mainly using liquid chromatography. The results were compared to data being available in the literature. Assessing the stability regarding the dosage form and the affiliation of the drug class was conducted.
The experimental studies comprise the examination of 50 drug substances manufactured 20–30 years ago and 14 long expired ampoules which were older than 40 years in the time of analysis, exceeding many times the maximum shelf life of five years.
For investigation of the solid drug substances, pharmacopoeial methods were applied as far as possible. Indeed, results of the study showed that 44 tested substances still complied with the specification of the Ph. Eur. with regard to the content and impurity profile, even after more than two decades of storage.
For analysis of the injection solutions, HPLC-UV and HPLC-ESI/MS techniques were applied, commonly based on liquid chromatography methods of the Ph. Eur. for determination of related substances. Each method was further validated for its application to ensure accurate API quantification corresponding to ICH Q2(R1). Quite a few ampoules were identified to show surprisingly high stability. In spite of their age of 53–72 years, APIs such as caffeine, etilefrine, synephrine, metamizole sodium, furosemide, and sodium salicylate complied with the specified content that is valid nowadays, respectively. Nevertheless, typical degradation reaction, e.g. hydrolysis, oxidation, or isomerization, was observed in all remaining ampoules. Various degrees of hydrolysis were revealed for scopolamine, procaine, and adenosine triphosphate, the contents were decreased to 71%, 70%, and 15% of the declared concentrations, respectively. In the epinephrine and dipyridamole ampoules, oxidative degradation has been occurred, finding respective API contents of more or less 70%. For dihydroergotamine, excessive decomposition by epimerization was observed, resulting in an API content of 21% and degradation by isomerization was found in lobeline, still containing 64% of the labeled claim.
In conclusion, supported by the data of the present studies and the literature, defining and authorizing a longer shelf-life may be applicable to numerous pharmaceuticals which should be considered by pharmaceutical manufacturers and regulatory authorities, if justified based on stability studies. A general extension of the shelf-lives of drug products and the abolishment or extension of the maximum shelf-life limit of five years would prevent disposing of still potent medications and save a lot of money to the entire health care system.
GPCRs, particularly muscarinic receptors (mAChRs), are significant therapeutic targets in many physiological conditions. The significance of dualsteric hybrids selectively targeting mAChR subtypes is their great advantage in avoiding undesired side effects. This is attained by exploitation of the high affinity of ligand-binding to the orthosteric site and the structural diversity of the allosteric site to target an individual mAChR subtype, as well as offering signal bias to avoiding undesired transduction pathways. Furthermore, dualsteric targeting of mAChR subtypes helps in the elucidation of the physiological role of each individual mAChR subtype.
The first project was the attempt of synthesis of the M2-preferring ligand AFDX-384. AFDX-384 is known to preferentially bind to the M2 receptor subtype as an orthosteric antagonist, with partial interaction with residues in the allosteric site. This project aimed to re-trace the synthesis route of AFDX-384, to open the door to its upscaling and the future synthesis of AFDX-type dualsteric ligands. The multi-step synthesis of AFDX-384 is achieved through the synthesis of its 2 precursors, the chloro acyl derivative VIII and the piperidinyl derivative IV. Upscaled synthesis of the piperidinyl derivative IV was attained. Synthesis of the chloro acyl compound VIII was attempted. Several trials to synthesize the benzopyridodiazepine nucleus as well as its chloro-acylation resulted in the production of the novel crystal structures V and VI. X-ray crystallography was also done for crystallized molecules of the closed-ring benzopyridodiazepine VII that was previously synthesized. Chloro-acylation reactions of compound VII using phosgene seem to be attainable when done using reflux overnight. However, the use of methanol to aid in elution during silica gel column chromatography converted the expected product to the carbamate analogue IX. Hence, further attempts in purification should refrain from the use of methanol. The use of triphosgene instead of phosgene demonstrates a cleaner route for further upscaled synthesis.
The second project was the synthesis of dualsteric ligands involving variable orthosteric and allosteric moieties. Four different types of hybrids have been created over multiple steps. Dualsteric ligands have been synthesized using either a phthalimido- or 1,8-naphthalimidopropylamino moiety as the allosteric-binding group, coupled to either N-desmethyl pirenzepine or N-desmethyl clozapine using variable chain lengths. Furthermore, the synthesis of the dualsteric ligands involving N-desmethyl clozapine linked to either the super-agonist iperoxo or acetylcholine, and being connected using variable alkane chain lengths. Several reaction conditions have been investigated throughout the analysis of the optimal condition to conduct the critical final step of synthesis of these dualsteric hybrids, which involves the linking of the two segments of the hybrid together. The optimal method, which produced the least side products and highest yield, was to connect the two intermediates of the compound in absence of base, catalyst or microwaves while stirring at 35 °C for several days using acetonitrile as solvent (silica gel TLC monitoring, 0.2 M aqueous KNO3/MeOH 2:3). The ideal purification methods for the final compounds were found to be either crystallization from the reaction medium or using C18 reverse phase silica gel flash chromatography (using H2O/MeOH solvent system). All the hybrids will be subjected to pharmacological testing using the appropriate FRET assays.
Bakterielle und parasitäre MIP-Proteine stellen wichtige Virulenzfaktoren dar, deren Inhibition das Überleben der Erreger sowie deren Penetration in menschliche Zellen stark einschränken kann. In dieser Arbeit standen die MIP-Proteine von Burkholderia pseudomallei (Auslöser der Melioidose) und Legionella pneumophila (Legionärskrankheit) im Fokus. Außerdem wurde das MIP-Protein von Trypanosoma cruzi (Chagas-Krankheit) untersucht. Die strukturverwandten humanen FKB-Proteine FKBP12 und FKBP52 sind relevante „off-targets“, wie Experimente mit Knockout-Mäusen gezeigt haben.
Ziel dieser Arbeit war die Verbesserung von bekannten MIP-Inhibitoren im Hinblick auf ihre Affinität und Selektivität für MIP-Proteine gegenüber den beiden genannten FKB-Proteinen bei gleichzeitig verbesserter Löslichkeit, mit Hilfe von in silico Methoden. Ausgangspunkt waren hierbei zwei von Dr. Christina Juli und Dr. Florian Seufert entwickelte Leitstrukturen, welche ein Pipecolinsäuregrundgerüst aufweisen. Diese Referenzliganden beinhalten einen 3,4,5-Trimethoxyphenylring (TMPR, vgl. Ref_t) bzw. einen Pyridinylring (Ref_p).
Beim Vergleich von insgesamt 32 MIP- und FKB-Proteinen konnten in zwei Loop-Bereichen, welche 50er bzw. 80er Loop genannt werden, relevante Unterschiede in der Aminosäuresequenz identifiziert werden. Die Nummerierung bezieht sich stets auf FKBP12. Diese Unterschiede ließen sich zum Design von vergleichsweise selektiv an MIP-Proteine bindenden Molekülen nutzen.
Der 50er Loop ist in nahezu allen MIP-Proteinen (jedoch nicht in BpsMIP) im Vergleich zu den FKB-Proteinen um zwei Aminosäuren verkürzt. Dadurch befindet sich das Proteinrückgrat von LpnMIP (Gln49) und TcrMIP (Arg49) näher am Zentrum der Bindetasche (definiert als Ile56, welches durch die Pipecolinsäureesterfunktion der Liganden adressiert wird). MD-Simulationen der beiden Apoproteine belegten, dass die geringere Distanz nicht durch Artefakte beim Modellieren der Strukturen bedingt ist. Aufbauend auf dieser Erkenntnis wurde gezeigt, dass der Pyridinylring von Ref_p eine Wasserstoffbrücke zu Gln49 ausbildet. Experimentell wurde dieser Befund durch eine entsprechende chemische Verschiebung der Aminosäure im NMR-Experiment von Dr. Kristian Schweimer bestätigt. Durch Überbrückung des Pipecolinsäurerings (Ligand 6bp) konnte die Wasserstoffbrücke in MD-Simulationen weiter stabilisiert werden. Durch Rechnungen zur Abschätzung der freien Bindungsenthalpien (mittels LIE und MM/GBSA) wurde eine erhöhte Affinität von 6bp im Vergleich zu Ref_p in LpnMIP ermittelt.
Im Laufe der Arbeit wurde anhand von pIC50-Werten, welche von Dr. Mathias Weiwad bestimmt wurden, erkannt, dass Liganden mit Pyridinylring oftmals eine bessere Affinität in LpnMIP aufweisen als die entsprechenden Liganden mit TMPR. Durch MD Simulationen wurde nachgewiesen, dass der TMPR in LpnMIP nur schwer an der in den anderen Proteinen bevorzugten Position binden kann. Grund hierfür ist die Mutation einer Aminosäure (zu Pro57) in diesem Bereich von LpnMIP: Diese verfügt über eine wenig flexible Seiten-kette, an welche sich der TMPR auf Grund seiner Rigidität nicht anpassen kann, was die Interaktion zwischen Protein und Ligand stört. Der Pyridinylring von Ref_p ist hiervon nicht betroffen, da er bevorzugt an einer anderen Stelle (Gln49, s. o.) bindet.
Der 80er Loop weist in vielen MIP-Proteinen deutlich hydrophobere Aminosäuren auf als in FKB-Proteinen. Von besonderem Interesse ist die Position 90, da hier in BpsMIP und LpnMIP sterisch weniger anspruchsvolle Aminosäuren (Val, Pro) vorliegen als in den bei-den FKB-Proteinen (Ile, Lys). Dieser Unterschied wurde mit kleinen hydrophoben Substituenten am Phenylring der Liganden adressiert. Bereits im Docking zeigten sich die positiven Effekte der para-Substitution durch Halogenatome oder eine Methylgruppe. Die von Dr. Mathias Weiwad und Dr. Mirella Vivoli ermittelten pIC50- bzw. pKi-Werte bestätigten diesen Trend. Zugleich nahm die Affinität zu FKBP12 deutlich ab. Bei der Untersuchung der Referenzliganden sowie deren Chlor- und Bromderivate in MD-Simulationen zeigte sich, dass der Phenylring der Liganden in den MIP-Proteinen bevorzugt in Richtung des 80er Loops orientiert ist; in den FKB-Proteinen liegt er hingegen um etwa 110° gedreht vor und kann somit schlechter mit der Bindetasche interagieren. Besonders ausgeprägt ist dieser Effekt in FKBP12. Basierend auf diesen Ergebnissen wurde der Phenylring durch einen 4-Bromo-1H-imidazol-2-ylsubstituenten ersetzt (Ligand 8ap). Dieser ist in der Lage, in der erwarteten Orientierung im Bereich des 80er Loops von BpsMIP zu binden und gleichzeitig eine stabile Wasserstoffbrücke zu Asp37 auszubilden. Hieraus resultiert für den Liganden eine deutlich höhere Affinität in LIE- und MM/GBSA-Rechnungen; in FKBP12 blieb sie auf Grund der dort instabilen Interaktion unverändert.
Die berechneten Energien können unmittelbar für einen relativen Vergleich verschiedener Liganden in einer Bindetasche verwendet werden. Für die Vorhersage von pKi- bzw. pIC50-Werten in den verschiedenen Proteinen ist eine Kalibrierung gegen die gemessenen Affinitäten erforderlich. Dies wurde für BpsMIP durchgeführt, indem eine lineare Korrelation zwischen den pKi- bzw. pIC50-Werten und den mit MM/GBSA ermittelten Energien aufgestellt wurde. Für LIE wurde auf publizierte Werte von Lamb et al. zurückgegriffen. Die berechneten Affinitäten stimmen für die bereits getesteten Inhibitoren gut mit den experimentellen pKi- und pIC50-Werten überein. Anhand der Modelle werden für 8ap Werte vorhergesagt, die besser als die experimentellen Affinitäten bekannter Liganden sind.
Idealerweise können auch aus den Scores, die durch Docking erhalten werden, bereits Rückschlüsse auf die Affinitäten der Liganden gezogen werden. Für die untersuchten Proteine war dies, auf Grund des engen Bereichs der experimentell ermittelten pKi- und pIC50-Werte, nicht mit hinreichender Richtigkeit möglich. Um die Scores dennoch für die Beurteilung neuer Liganden verwenden zu können, wurden logistische Regressionsmodelle erstellt. Anhand dieser kann abgeschätzt werden, ob ein Molekül in BpsMIP submikromolare Affinität aufweist. Die Richtigkeit dieser Vorhersagemodelle konnte durch die Berücksichtigung dreier weiterer Deskriptoren (Konfiguration am Stereozentrum der Pipecolinsäure, Molekulargewicht und logD-Wert) deutlich verbessert werden, wobei die AUC der entsprechenden ROC-Kurven Werte bis zu 0.9 erreichte. Diese Modelle können für die Postprozessierung eines Dockings angewendet werden, um die vielversprechendsten Kandidaten zu identifizieren und anschließend in rechnerisch anspruchsvolleren MD-Simulationen genauer zu untersuchen.
Mit dieser Arbeit wurde zur Weiterentwicklung der Leitstrukturen Ref_t und Ref_p beigetragen. Viele der getesteten Derivate wiesen deutlich verbesserte Löslichkeit bei gleichbleibender Affinität auf. Ferner wurden erstmalig detailliert die Unterschiede in den Bindetaschen zwischen 32 MIP- und FKB-Proteinen evaluiert. Hiervon wurden fünf in MD-Simulationen als Apoprotein und im Komplex mit verschiedenen Inhibitoren verglichen. Anhand dieser Simulationen wurde nachgewiesen, dass jeweils eine Aminosäure in BpsMIP und LpnMIP im Vergleich zum wichtigsten „off-target“ FKBP12 selektiv durch eine Wasserstoffbrücke adressiert werden kann. Durch LIE- und MM/GBSA-Rechnungen konnte gezeigt werden, dass in diesen hochkonservierten Bindetaschen eine bedeutende Modulation der Affinität zugunsten von BpsMIP möglich ist.
Der Gruppe der Macrogole sowie den darauf basierenden Abkömmlingen, den Macrogolfettalkoholethern, Macrogolfettsäureestern und Polysorbaten, kommt in der modernen Galenik eine wichtige Rolle zu. Dienten sie vormals nur als gewöhnliche Emulgatoren, so finden sie heutzutage vor allem im Bereich der gezielten Wirkstofffreisetzung, der Erhöhung der Bioverfügbarkeit sowie als Löslichkeitsvermittler komplexer Systeme Anwendung. Diese vielschichtigen Anwendungsgebiete erfordern, auch aufgrund der polydispersen Strukturen der Macrogole, eine reproduzierbare und aussagekräftige Analytik.
Das Europäische Arzneibuch (Ph. Eur.) bietet zur Charakterisierung der Hilfsstoffe eine Handvoll Messgrößen, die sog. Fettkennzahlen, die eine Größenordnung vorhandener funktioneller Gruppen liefern. Zu diesen gehören Werte wie Hydroxylzahl, Iodzahl, Peroxidzahl oder Säurezahl. Diese bieten zwar einen Überblick über den Größenbereich der mittleren Kettenlängen oder einen möglichen Abbau der Strukturen, beispielsweise durch Autoxidation, jedoch geben sie keine Auskunft über die Polymerverteilung. Insbesondere diese kann jedoch, je nach Herstellungsweise, stark variieren. Außerdem ist die Methodik der Fettkennzahlenbestimmungen aufgrund der strikten Reaktionsabläufe und zahlreicher Reaktionsschritte einerseits sehr zeitaufwändig und andererseits anfällig für Fehler.
Die HPLC hat, insbesondere aufgrund der Automation, bereits seit Jahren den Status des Goldstandards in der pharmazeutischen Analytik inne. Gekoppelt mit der UV-Detektion bietet sie für zahlreiche Wirkstoffe die Möglichkeit zur schnellen, einfachen und robusten Analyse. Im Bereich der Hilfsstoffe verbreitet sich die HPLC-Analytik langsamer, da viele Hilfsstoffe keinen Chromophor aufweisen. Eine Anwendung der hochsensitiven Massenspektrometrie wäre zwar zur Detektion geeignet, würde sich für die Routineanwendung jedoch als zu komplex und kostenintensiv gestalten. Doch mit der Entwicklung der Aerosol-basierten Detektoren wie dem ELSD (evaporative light scattering detector), dem CAD (charged aerosol detector) und dem NQADTM (nano quantity aerosol detector) wurde auch für nicht-chromophore Substanzen ein Einsatz der HPLC möglich.
Die vorliegende Arbeit befasste sich mit der Entwicklung einer HPLC-CAD-Methode, die eine möglichst große Bandbreite der Macrogole und der darauf basierenden Hilfsstoffe erfassen kann. Die Trennung erfolgte an einer C18-Trennsäule. Es wurde eine Gradienten-Methode entwickelt, die aus mehreren linearen Gradientenstufen zusammengesetzt wurde, um verschiedene Kettenlängen der Polymere besser voneinander zu trennen. Als mobile Phasen dienten Wasser und Acetonitril, denen jeweils 0.1 % Ameisensäure zugesetzt wurden.
Es konnten Macrogole im Bereich PEG 300 bis PEG 3000 mit akzeptabler Auflösung aufgetrennt werden. Diese Ergebnisse wurden für PEG 300 – 1500 mittels Massenspektrometrie verifiziert. Es konnten fünf gesättigte und zwei ungesättigte Fettsäuren, sowie zwei Fettalkohole verschiedener Kettenlängen voneinander getrennt werden. Es wurden 13 Macrogol-basierte Hilfsstoffe mit der entwickelten Methode untersucht und erfolgreich getrennt. Die Macrogolfettalkoholether, -stearate und Polysorbate wurden insoweit aufgetrennt, dass die Polymerverteilung beobachtet werden konnte.
Freie PEGs in den Hilfsstoffen wurden getrennt und identifiziert. Anhand dieser konnten unterschiedliche Herstellungsweisen zugeordnet werden. Abhängig von der mittleren Kettenlänge der verarbeiteten PEGs konnten teilweise die freien Fettsäuren bzw. -alkohole von den Estern bzw. Ethern getrennt und identifiziert werden. Im Bereich der kürzeren mittleren Kettenlängen wurden die freien Fettsäuren und -alkohole von den Estern und Ethern überlagert.
Macrogolglycerolhydroxystearat (Cremophor® RH40) wurde in seine Komponenten aufgetrennt, mit Ausnahme der linearen Monoester, die mit den freien PEGs partiell koeluierten und die Glyceroltriester, die Größenausschlusseffekte zeigten.
Die Methode wurde für Stabilitätsuntersuchungen der ungesättigten Fettsäuren, Öl- und Linolsäure, eingesetzt. Hierzu wurden diese Säuren in Lösung chemisch (Wasserstoffperoxid) und thermisch (60 °C) gestresst und in bestimmten Zeitabständen analysiert. Es zeigte sich ein zeit- und temperaturabhängiger Abbau. Die teilweise Zuordnung der Abbauprodukte erfolgte durch Bestimmung des m/z mittels Massenspektrometrie. Die Methode war geeignet, um das Ausmaß eines oxidativen Abbaus von der Hauptsubstanz zu trennen und strukturell einzuordnen.
Generell bietet die Methode eine gute Basis, die eine Vielzahl an Substanzgruppen erfassen und charakterisieren kann. Sie bietet eine Ergänzung der Fettkennzahlen, die einen verringerten Arbeitsaufwand mit sich bringt. Für spezifischere Betrachtungen (Langzeitstabilität, verwandte Substanzgruppen) stellt sie einen guten Ausgangspunkt dar.
The aim of this thesis was the application of the functional prepolymer NCO-sP(EO-stat-PO) for the development of new biomaterials. First, the influence of the star-shaped polymers on the mechanical properties of biocements and bone adhesives was investigated. 3-armed star-shaped macromers were used as an additive for a mineral bone cement, and the influence on the mechanical properties was studied. Additionally, a previously developed bone adhesive was examined regarding cytocompatibility. The second topic was the examination of novel functionalization steps which were performed on the surface of electrospun fibers modified with NCO-sP(EO-stat-PO). This established method of functionalizing electrospun meshes was advanced regarding the modification with proteins which was then demonstrated in a biological application. Two different kinds of antibodies were immobilized on the fiber surface in a consecutive manner and the influence of these proteins on the cell behavior was investigated. The final topic involved the quantification of surface-bound peptide sequences. By functionalization of the peptides with the UV-reactive molecule 2-mercaptopyridine it was possible to quantify this compound via UV measurements by cleavage of disulfide bridges and indirectly draw conclusions about the number of immobilized peptides.
In the field of mineral biocements and bone adhesives, NCO-sP(EO-stat-PO) was able to influence the setting behavior and mechanical performance of mineral bone cements based on calcium phosphate chemistry. The addition of NCO-sP(EO-stat-PO) resulted in a pseudo-ductile fracture behavior due to the formation of a hydrogel network in the cement, which was then mineralized by nanosized hydroxyapatite crystals following cement setting. Accordingly, a commercially available aluminum silicate cement from civil engineering could be modified.
In addition, it could be shown that the use of NCO-sP(EO-stat-PO) is beneficial for adjusting specific material properties of bone adhesives. Here, the crosslinking behavior of the prepolymer in an aqueous medium was exploited to form an interpenetrating network (IPN) together with a photochemically curing poly(ethylene glycol) dimethacrylate (PEGDMA) matrix. This could be used for the development of a bone adhesive with an improved adhesion to bone in a wet environment. The developed bone adhesive was further investigated in terms of possible influences of the initiator systems. In addition, the material system was tested for cytocompatibility by using different cell lines.
Moreover, the preparation of electrospun fiber meshes via solution electrospinning consisting of poly(lactide-co-glycolide) (PLGA) as a backbone polymer and NCO-sP(EO-stat-PO) as functional additive is an established method for the application of the meshes as a replacement of the native extracellular matrix (ECM). In general, these fibers reveal diameters in the nanometer range, are protein and cell repellent due to the hydrophilic properties of the prepolymer and show a specific biofunctionalization by immobilization of peptide sequences. Here, the isocyanate groups presented on the fiber surface after electrospinning were used to carry out various functionalization steps, while retaining the properties of protein and cell repellency. The modification of the electrospun fibers involved the immobilization of analogs or antagonists of tumor necrosis factor (TNF) and the indirect detection of these by interaction with a light-producing enzyme. Here, a multimodal modification of the fiber surface with RGD to mediate cell adhesion and two different antibodies could be achieved. After culturing the cell line HT1080, the pro- or anti-inflammatory response of cells could be detected by IL-8 specific ELISA measurements.
Furthermore, the quantification of molecules on the surface of electrospun fibers was investigated. It was tested whether the detection by means of super-resolution microscopy would be possible. Therefore, experiments were performed with short amino acid sequences such as RGD for quantification by fluorescence microscopy. Based on earlier results, in which a UV-spectrometrically active molecule was used to detect the quantification of RGD, it was shown that short peptides can also be quantified in a small scale on flat functional substrates (2D) such as NCO-sP(EO-stat-PO) hydrogel coatings, and modified electrospun fibers produced from PLGA and NCO-sP(EO-stat-PO) (3D). In addition, a collagen sequence was used to prove that a successful quantification can be carried out as well for longer peptide chains.
These studies have revealed that NCO-sP(EO-stat-PO) can serve as a functional additive for many applications and should be considered for further studies on the development of novel biomaterials. The rapid crosslinking reaction, the resulting hydrogel formation and the biocompatibility are to be mentioned as positive properties, which makes the prepolymer interesting for future applications.
Molecular Effects of Polyphenols in Experimental Type 2 Diabetes Mellitus and Metabolic Syndrome
(2019)
The growing prevalence of type 2 diabetes mellitus (T2DM) demands novel therapeutic and adjuvant strategies. Polyphenols (PPs) are plant secondary metabolites. Epidemiological studies demonstrate an inverse relationship between their increased intake and the risk of development of T2DM and cardiovascular complications. However, the PPs’ mechanism of action remains largely unknown. The present work aimed to expand knowledge regarding the effects of PPs on diabetes relevant molecular targets.
Pycnogenol® (PYC) is a standardized pine bark extract which consists of oligomeric and monomeric PPs. Its anti-diabetic effects have been demonstrated in clinical trials. As a part of a human study involving 20 healthy volunteers, the extract’s effects on dipeptidyl peptidase IV (DPP IV) were investigated. This protease terminates the insulin secretagogue action of incretins. Its inhibition is a promising strategy in T2DM treatment. This study uncovered that PYC-intake of 100 mg daily over 14 days statistically significantly reduced DPP IV serum concentrations by 8.2 % (n= 38, p= 0.032). Contrary to expectations, this decrease was not paralleled by a reduction in the serum DPP IV enzymatic activity. To the best of our knowledge, the present study was the first investigating the effects of PPs on DPP IV serum concentrations and activities in humans. The finding that PYC is capable of reducing DPP IV serum concentrations might be important with regard to diabetes, where DPP IV levels are increased.
Screenings for PPs’ in vitro effects on DPP IV activity were performed employing a purified enzyme. The effects of tested PPs (among which PYC ingredients) at a physiologically relevant concentration of 5 µM were weak (< 10 %) and too small compared to the reference compound sitagliptin, and thus not likely to be clinically relevant. This result is in discordance with some published data, but consistent with the outcome from the present human study. In addition, fluorescence interactions with the experimental setup were registered: under certain conditions urolithin B exhibited an autofluorescence which might mask eventual inhibitory activity. Quercetin quenched the fluorescence slightly which might contribute to false positive results. No statistically significant effects of selected constituents and metabolites of PYC on the total DPP IV protein expression were observed in 3T3-L1 adipocytes. Thus, the lower DPP IV in vivo concentrations after intake of PYC cannot be explained with down-regulation of the DPP IV expression in adipocytes.
Akt kinase is responsible for the transmission of insulin signals and its dysregulation is related to insulin resistance and plays an important role in development of cardiovascular complications in T2DM. Thus, the modulation of the phosphorylation status of endothelial Akt-kinase, respectively its activity, might be a promising strategy in the management of these pathologies. This work aimed to uncover the effects of PPs from different structural subclasses on Akt-phosphorylation (pAkt) in endothelial cells (Ea.hy926). Short-term effects (5 – 30 min) were investigated at a concentration of 10 µM. In a pilot study two model PPs induced a moderate, but reproducible inhibition of pAkt Ser473 of 52.37 ± 21.01 % (quercetin; p= 0.006, n= 3) and 37.79 ± 7.14 % (resveratrol; p= 0.021, n= 4) compared to the negative control. A primary screening with Western blot analysis investigated the effects of eight compounds from different subclasses on pAkt Ser473 and Thr308 to reveal whether the observed inhibition PPs a group effect or specific to certain compounds. In addition to resveratrol and quercetin, statistically significant inhibitions of pAkt Ser473 were induced by luteolin (29.96 ± 11.06 %, p< 0.01, n= 6) and apigenin (22.57 ± 10.30 %, p< 0.01, n= 6). In contrast, genistein, 3,4,5-trimethoxystilbene, taxifolin and (+)-catechin caused no inhibition. A strong positive and statistically significant correlation between the mean inhibitory effects of the tested PPs on both Akt-residues Ser473 and Thr308 (r= 0.9478, p= 0.0003) was determined. A comprehensive secondary screening via ELISA involving 44 compounds from nine structural groups quantified the effects of PPs on pAkt Ser473 to uncover potential structure-activity features. The most potent inhibitors were luteolin (44.31 ± 17.95 %), quercetin (35.71 ± 8.33 %), urolithin A (35.28 ± 11.80 %), apigenin (31.79 ± 6.16 %), fisetin (28.09 ± 9.09 %), and resveratrol (26.04 ± 5.58 %). These effects were statistically significant (p< 0.01, n= 3 to 6). Further lead structure optimization might be based on the fact that the effects of luteolin and resveratrol also differed statistically significantly from each other (p= 0.008).
To the best of our knowledge, the present study is the first to compare quantitatively the short term effects of PPs from different subclasses on pAkt in endothelial cells. Basic structure-activity relationships revealed that for flavones and flavonols the presence of a C2=C3 double bond (ring C) was essential for inhibitory activity and hydroxylation on the m- and p- positions in the ring B contributed to it. For stilbenoids, three free OH-groups appeared to be optimal. The comparison of the inhibitory potentials of ellagic acid and its microbial metabolites showed that urolithin A was statistically significantly more effective than its progenitor compound. Despite their structural similarities, the only active compound among all urolithins tested was urolithin A, hydroxylated at the C3 and C8 positions. This suggested a specific effect for urolithin A. Based on the common structural determinants and molecular geometry of the most active PPs a pharmacophore model regarding Akt-inhibition was proposed.
In summary, the effects of a wide variety of PPs from diverse structural subclasses on the in vitro phosphorylation of endothelial Akt were quantitatively analyzed for the first time, the effects of previously undescribed compounds were determined and structure activity relationships were elucidated. The inhibitory potential of individual PPs might be beneficial in cases of sustained over-activation of Akt-kinase and its substrates such as S6 kinase as reported for certain T2DM-related pathological states, such as insulin resistance, endothelial dysfunction, excessive angiogenesis, vascular calcification, and insulin triggered DNA-damage. The results of the present work suggest potential molecular mechanisms of action of PP involving Akt-inhibition and DPP IV-down-regulation and thus contribute to the understanding of anti-diabetic effects of these compounds on the molecular level.
The number of active pharmaceutical ingredients (APIs) exhibiting a low solubility in aqueous media or a slow dissolution rate kept rising over the past years urging formulation scientists to explore new ways to tackle poor solubility and to enable oral absorption from such compounds. Bioavailability of poorly water-soluble compounds can be improved by increasing the dissolution rate and/or by increasing the gastro intestinal concentration through transient supersaturation. The dissolution rate of the API can be typically modified by the choice of the physical form, the polymorphic form, the powder surface area, and the local pH, while a transient supersaturation can be extended mainly by nucleation or crystallization inhibiting effects. In the present thesis, three strategies were explored to tailor the dissolution rate, the supersaturation and the hydrotropic solubilization of APIs, weak bases, respectively.
The first part of this thesis followed a bioinspired approach to extend the kinetic solubility of salts and co-crystals. API salts and co-crystals are high energy forms that can generate supersaturated solutions with respect to any more stable form, typically the most stable API form in physiological environment. The transient kinetic stabilization of supersaturated states, also termed “parachute effect”, is considered to improve bioavailability and is one aspect of the formulation that can be tailored. Inspiration from plants, which store high concentrations of aromatic bases in their vacuoles via complexation with polyphenols, sparked the evaluation to use hydroxybenzoic acid derivatives for salt or co-crystal engineering. Imatinib was chosen as the model compound for this investigation as its aromaticity and flat molecular architecture could favor interactions with hydroxybenzoic acid derivatives. One 1:1 Imatinib syringate co-crystal (I-SYA (1:1)) and one 1:2 Imatinib syringate co-crystal salt (I-SYA (1:2)) were obtained. Their dissolution assays in simulated intestinal fluid (SIF; a 50 mM phosphate buffer of pH 6.8) revealed that they formed stable solutions for several hours and days, respectively, in contrast to the marketed Imatinib mesylate salt (approx. 1h). This kinetic stability in solution was linked to the nucleation inhibition of the less soluble Imatinib hydrate by syringic acid (SYA). In solution 1H-NMR studies evidenced the aggregation of Imatinib and SYA. The amphiphilic nature of both Imatinib and SYA is considered to drive their association in solution, additionally, multiple intermolecular interactions such as hydrogen bonds and π-π stacking are likely to contribute. The association in solution enabled a phase of extended supersaturation, i.e., a parachute against desupersaturation, while no negative impact of aggregation on the permeability of both Imatinib and SYA was observed.
A prerequisite to reach supersaturation is a rapid dissolution and release of the API from the formulation. Accordingly, the second and third part of this thesis is focused on the so-called “spring effect” of amorphous solid dispersions (ASDs). The addition of a hydrotropic agent, meaning a molecule that can solubilize poorly water-soluble APIs in aqueous solutions (well-known examples of hydrotropes are benzoic acid and nicotinamide) into an amorphous Ciprofloxacin-polymer matrix led to ternary systems with a significantly faster release and higher concentration of the API in SIF as compared to binary ASDs consisting of Ciprofloxacin (CPX) and polymer only. The stronger spring could be rationalized by an improved wetting of the ASD, or/and by a hydrotropic solubilization effect, although these hypotheses need further investigation. Marked differences in the dissolution profiles of binary ASDs were observed in biorelevant fasted simulated intestinal fluid (FaSSIF; a medium containing Na taurocholate (3 mM) and lecithin (0.75 mM) at pH 6.5) as compared to SIF. In FaSSIF, API release from binary polymeric ASDs was largely improved, and the duration of supersaturation was extended. This suggests that the bile salt Na taurocholate and lecithin present in FaSSIF do improve both dissolution rate and supersaturation of ASDs, the two pillars of ASDs as oral enabling formulations. Indeed, bile salts are endogenous surfactants which, together with phospholipids, play an important role in the wetting, solubilization, and absorption of lipophilic compounds.
The aim of the third part of the present thesis was to study ASDs as formulation principles reducing the strong positive food effect of Compound A. By inclusion of Na taurocholate (NaTC) within the matrix of polymeric ASDs a significant improvement of the dissolution rate and the kinetic solubility in SIF were achieved. Transient supersaturated states of up to four orders of magnitude over the equilibrium solubility were obtained. Two ASDs were selected for further in vivo evaluation in dog. The first was a NaTC/Eudragit E based ASD meant to dissolve and release Compound A in the acidic environment of the stomach, where its solubility is the highest. The second relied on the release of Compound A in the neutral environment of the duodenum and jejunum by using an enterically dissolving polymer, HPMC-P. Releasing the API at the site of its putative absorption was an attempt to control supersaturation levels in the duodenum and to prevent portioning and thus dilution effects during transfer from the stomach. In fasted dogs, exposure from the NaTC/HPMC-P ASD was close to that of the reference Compound A formulation under fed conditions, which suggests an improved dissolution rate and kinetic solubility under fasted conditions (historical data). The exposure from the NaTC/Eudragit E ASD was twice as low as from the NaTC/HPMC-P ASD, and also lower compared to Compound A reference formulation, whereas in vitro the parachute effect of the NaTC/Eudragit E ASD was largely superior to that of the NaTC/HPMC-P ASD. A difference in the extend of the parachute could be related to differences in the thermodynamic activity of dissolved molecules from the two ASDs. Indeed, the high instability of the NaTC/HPMC-P ASD could stem from a high thermodynamic activity driving diffusion through membranes, whereas less instable solutions of NaTC/Eudragit E could indicate solubilization effects which often translate into a lower flux through the biological membrane. Additionally, the pH of the environment where dissolution takes place might be an important factor for absorption, and could also account for the difference in exposure from the two ASDs.
The aim of this thesis was to explore how the intimate environment of weak, poorly soluble bases could be functionalized to improve dissolution rate and kinetic solubility. The investigations highlighted that the performance of enabling oral delivery formulations of weak bases in aqueous media can be enhanced at different levels. At one end initial dissolution rate of ASDs can be tailored by introducing hydrotropes or/and bile salts within the polymeric matrix of ASDs. Bile salts, when combined with appropriate polymers, had also a precipitation inhibition effect enabling the maintenance of supersaturation for a bio-relevant period of time. These results set the ground for further investigations to comprehend specific interactions between bile salts and APIs, and potentially polymers at the molecular level. It will be interesting to explore how such complex systems can be exploited in the formulation design of poorly water-soluble APIs. In addition, it was observed that the duration of supersaturation generated by salts/co-crystals can be extended by the pertinent selection of counterions or coformers. The in vivo relevance of these tunings remains to be evaluated, as translation from closed, in vitro systems to the highly dynamic gastrointestinal environment is not straightforward. A better understanding of the contribution of each kinetic stage (dissolution, supersaturation, and precipitation) and their interplay with physiological factors impacting absorption is essential to facilitate the design of formulations with improved pharmacokinetics.