Institut für Geographie und Geologie
Refine
Has Fulltext
- yes (9)
Is part of the Bibliography
- yes (9)
Year of publication
- 2023 (9) (remove)
Document Type
- Doctoral Thesis (9) (remove)
Keywords
- Datenfusion (2)
- Ernteertrag (2)
- Fernerkundung (2)
- Landwirtschaft / Nachhaltigkeit (2)
- Winterweizen (2)
- Accurate crop monitoring (1)
- Arctic (1)
- Armutsviertel (1)
- Bias correction (1)
- Bias-Korrektur (1)
Sonstige beteiligte Institutionen
Permafrost degradation is observed all over the world as a consequence of climate change and the associated Arctic amplification, which has severe implications for the environment. Landslides, increased rates of surface deformation, rising likelihood of infrastructure damage, amplified coastal erosion rates, and the potential turnover of permafrost from a carbon sink to a carbon source are thereby exemplary implications linked to the thawing of frozen ground material. In this context, satellite earth observation is a potent tool for the identification and continuous monitoring of relevant processes and features on a cheap, long-term, spatially explicit, and operational basis as well as up to a circumpolar scale.
A total of 325 articles published in 30 different international journals during the past two decades were investigated on the basis of studied environmental foci, remote sensing platforms, sensor combinations, applied spatio-temporal resolutions, and study locations in an extensive review on past achievements, current trends, as well as future potentials and challenges of satellite earth observation for permafrost related analyses. The development of analysed environmental subjects, utilized sensors and platforms, and the number of annually published articles over time are addressed in detail. Studies linked to atmospheric features and processes, such as the release of greenhouse gas emissions, appear to be strongly under-represented. Investigations on the spatial distribution of study locations revealed distinct study clusters across the Arctic. At the same time, large sections of the continuous permafrost domain are only poorly covered and remain to be investigated in detail. A general trend towards increasing attention in satellite earth observation of permafrost and related processes and features was observed. The overall amount of published articles hereby more than doubled since the year 2015. New sources of satellite data, such as the Sentinel satellites and the Methane Remote Sensing LiDAR Mission (Merlin), as well as novel methodological approaches, such as data fusion and deep learning, will thereby likely improve our understanding of the thermal state and distribution of permafrost, and the effects of its degradation. Furthermore, cloud-based big data processing platforms (e.g. Google Earth Engine (GEE)) will further enable sophisticated and long-term analyses on increasingly larger scales and at high spatial resolutions.
In this thesis, a specific focus was put on Arctic permafrost coasts, which feature increasing vulnerability to environmental parameters, such as the thawing of frozen ground, and are therefore associated with amplified erosion rates. In particular, a novel monitoring framework for quantifying Arctic coastal erosion rates within the permafrost domain at high spatial resolution and on a circum-Arctic scale is presented within this thesis. Challenging illumination conditions and frequent cloud cover restrict the applicability of optical satellite imagery in Arctic regions. In order to overcome these limitations, Synthetic Aperture RADAR (SAR) data derived from Sentinel-1 (S1), which is largely independent from sun illumination and weather conditions, was utilized. Annual SAR composites covering the months June–September were combined with a Deep Learning (DL) framework and a Change Vector Analysis (CVA) approach to generate both a high-quality and circum-Arctic coastline product as well as a coastal change product that highlights areas of erosion and build-up. Annual composites in the form of standard deviation (sd) and median backscatter were computed and used as inputs for both the DL framework and the CVA coastal change quantification. The final DL-based coastline product covered a total of 161,600 km of Arctic coastline and featured a median accuracy of ±6.3 m to the manually digitized reference data. Annual coastal change quantification between 2017–2021 indicated erosion rates of up to 67 m per year for some areas based on 400 m coastal segments. In total, 12.24% of the investigated coastline featured an average erosion rate of 3.8 m per year, which corresponds to 17.83 km2 of annually eroded land area. Multiple quality layers associated to both products, the generated DL-coastline and the coastal change rates, are provided on a pixel basis to further assess the accuracy and applicability of the proposed data, methods, and products.
Lastly, the extracted circum-Arctic erosion rates were utilized as a basis in an experimental framework for estimating the amount of permafrost and carbon loss as a result of eroding permafrost coastlines. Information on permafrost fraction, Active Layer Thickness (ALT), soil carbon content, and surface elevation were thereby combined with the aforementioned erosion rates. While the proposed experimental framework provides a valuable outline for quantifying the volume loss of frozen ground and carbon release, extensive validation of the utilized environmental products and resulting volume loss numbers based on 200 m segments are necessary. Furthermore, data of higher spatial resolution and information of carbon content for deeper soil depths are required for more accurate estimates.
Accurate crop monitoring in response to climate change at a regional or field scale plays a significant role in developing agricultural policies, improving food security, forecasting, and analysing global trade trends. Climate change is expected to significantly impact agriculture, with shifts in temperature, precipitation patterns, and extreme weather events negatively affecting crop yields, soil fertility, water availability, biodiversity, and crop growing conditions. Remote sensing (RS) can provide valuable information combined with crop growth models (CGMs) for yield assessment by monitoring crop development, detecting crop changes, and assessing the impact of climate change on crop yields. This dissertation aims to investigate the potential of RS data on modelling long-term crop yields of winter wheat (WW) and oil seed rape (OSR) for the Free State of Bavaria (70,550 km2), Germany. The first chapter of the dissertation describes the reasons favouring the importance of accurate crop yield predictions for achieving sustainability in agriculture. Chapter second explores the accuracy assessment of the synthetic RS data by fusing NDVIs of two high spatial resolution data (high pair) (Landsat (30 m, 16-days; L) and Sentinel-2 (10 m, 5–6 days; S), with four low spatial resolution data (low pair) (MOD13Q1 (250 m, 16-days), MCD43A4 (500 m, one day), MOD09GQ (250 m, one-day), and MOD09Q1 (250 m, 8-days)) using the spatial and temporal adaptive reflectance fusion model (STARFM), which fills regions' cloud or shadow gaps without losing spatial information. The chapter finds that both L-MOD13Q1 (R2 = 0.62, RMSE = 0.11) and S-MOD13Q1 (R2 = 0.68, RMSE = 0.13) are more suitable for agricultural monitoring than the other synthetic products fused. Chapter third explores the ability of the synthetic spatiotemporal datasets (obtained in chapter 2) to accurately map and monitor crop yields of WW and OSR at a regional scale. The chapter investigates and discusses the optimal spatial (10 m, 30 m, or 250 m), temporal (8 or 16-day) and CGMs (World Food Studies (WOFOST), and the semi-empiric light use efficiency approach (LUE)) for accurate crop yield estimations of both crop types. Chapter third observes that the observations of high temporal resolution (8-day) products of both S-MOD13Q1 and L-MOD13Q1 play a significant role in accurately measuring the yield of WW and OSR. The chapter investigates that the simple light use efficiency (LUE) model (R2 = 0.77 and relative RMSE (RRMSE) = 8.17%) that required fewer input parameters to simulate crop yield is highly accurate, reliable, and more precise than the complex WOFOST model (R2 = 0.66 and RRMSE = 11.35%) with higher input parameters. Chapter four researches the relationship of spatiotemporal fusion modelling using STRAFM on crop yield prediction for WW and OSR using the LUE model for Bavaria from 2001 to 2019. The chapter states the high positive correlation coefficient (R) = 0.81 and R = 0.77 between the yearly R2 of synthetic accuracy and modelled yield accuracy for WW and OSR from 2001 to 2019, respectively. The chapter analyses the impact of climate variables on crop yield predictions by observing an increase in R2 (0.79 (WW)/0.86 (OSR)) and a decrease in RMSE (4.51/2.57 dt/ha) when the climate effect is included in the model. The fifth chapter suggests that the coupling of the LUE model to the random forest (RF) model can further reduce the relative root mean square error (RRMSE) from -8% (WW) and -1.6% (OSR) and increase the R2 by 14.3% (for both WW and OSR), compared to results just relying on LUE. The same chapter concludes that satellite-based crop biomass, solar radiation, and temperature are the most influential variables in the yield prediction of both crop types. Chapter six attempts to discuss both pros and cons of RS technology while analysing the impact of land use diversity on crop-modelled biomass of WW and OSR. The chapter finds that the modelled biomass of both crops is positively impacted by land use diversity to the radius of 450 (Shannon Diversity Index ~0.75) and 1050 m (~0.75), respectively. The chapter also discusses the future implications by stating that including some dependent factors (such as the management practices used, soil health, pest management, and pollinators) could improve the relationship of RS-modelled crop yields with biodiversity. Lastly, chapter seven discusses testing the scope of new sensors such as unmanned aerial vehicles, hyperspectral sensors, or Sentinel-1 SAR in RS for achieving accurate crop yield predictions for precision farming. In addition, the chapter highlights the significance of artificial intelligence (AI) or deep learning (DL) in obtaining higher crop yield accuracies.
Die einzigartigen Natur- und Kulturlandschaften von Schutzgebieten sind weltweit bedeutende Destinationen für Tages- und Übernachtungsgäste. Die Ausgaben von Besuchern erzeugen ökonomische Effekte und sichern so regionale Wertschöpfung und Beschäftigung. Zur Analyse dieser regionalökonomischen Effekte des Tourismus in Schutzgebieten stehen heute verschiedene Methoden zur Verfügung. International ist die Input-Output-Analyse das etablierte Standardverfahren in mehreren Monitoringsystemen. Die Schutzgebietsforschung in Deutschland hat sich hingegen auf die Wertschöpfungsanalyse spezialisiert und geht dabei von generellen Annahmen der touristischen Multiplikatorwirkung aus. Vor dem Hintergrund einer Adaption an internationale Standards wird erstmals eine Input-Output-Analyse der regionalökonomischen Effekte des Tourismus in deutschen Schutzgebieten durchgeführt. Berechnungen auf Grundlage eines Input-Output-Modells liefern für das Fallbeispiel Biosphärengebiet Schwarzwald regionale und branchenspezifsche Multiplikatoren. Die Ergebnisse werden zum einen mit einer Input-Output-Analyse des Nationalparks Schwarzwald und zum anderen mit einer klassischen Wertschöpfungsanalyse verglichen. Darüber hinaus ermöglicht die Anwendung eines multiregionalen Ansatzes die Analyse der touristischen Multiplikatorwirkung in der gesamten Naturparkregion Schwarzwald Mitte/Nord und Südschwarzwald.
Accurate crop monitoring in response to climate change at a regional or field scale
plays a significant role in developing agricultural policies, improving food security,
forecasting, and analysing global trade trends. Climate change is expected to
significantly impact agriculture, with shifts in temperature, precipitation patterns, and
extreme weather events negatively affecting crop yields, soil fertility, water availability,
biodiversity, and crop growing conditions. Remote sensing (RS) can provide valuable
information combined with crop growth models (CGMs) for yield assessment by
monitoring crop development, detecting crop changes, and assessing the impact of
climate change on crop yields. This dissertation aims to investigate the potential of RS
data on modelling long-term crop yields of winter wheat (WW) and oil seed rape (OSR)
for the Free State of Bavaria (70,550 km2
), Germany. The first chapter of the dissertation
describes the reasons favouring the importance of accurate crop yield predictions for
achieving sustainability in agriculture. Chapter second explores the accuracy
assessment of the synthetic RS data by fusing NDVIs of two high spatial resolution data
(high pair) (Landsat (30 m, 16-days; L) and Sentinel-2 (10 m, 5–6 days; S), with four low
spatial resolution data (low pair) (MOD13Q1 (250 m, 16-days), MCD43A4 (500 m, one
day), MOD09GQ (250 m, one-day), and MOD09Q1 (250 m, 8-days)) using the spatial
and temporal adaptive reflectance fusion model (STARFM), which fills regions' cloud
or shadow gaps without losing spatial information. The chapter finds that both L-MOD13Q1 (R2 = 0.62, RMSE = 0.11) and S-MOD13Q1 (R2 = 0.68, RMSE = 0.13) are more
suitable for agricultural monitoring than the other synthetic products fused. Chapter
third explores the ability of the synthetic spatiotemporal datasets (obtained in chapter
2) to accurately map and monitor crop yields of WW and OSR at a regional scale. The
chapter investigates and discusses the optimal spatial (10 m, 30 m, or 250 m), temporal
(8 or 16-day) and CGMs (World Food Studies (WOFOST), and the semi-empiric light
use efficiency approach (LUE)) for accurate crop yield estimations of both crop types.
Chapter third observes that the observations of high temporal resolution (8-day)
products of both S-MOD13Q1 and L-MOD13Q1 play a significant role in accurately
measuring the yield of WW and OSR. The chapter investigates that the simple light use
efficiency (LUE) model (R2 = 0.77 and relative RMSE (RRMSE) = 8.17%) that required fewer input parameters to simulate crop yield is highly accurate, reliable, and more
precise than the complex WOFOST model (R2 = 0.66 and RRMSE = 11.35%) with higher
input parameters. Chapter four researches the relationship of spatiotemporal fusion
modelling using STRAFM on crop yield prediction for WW and OSR using the LUE
model for Bavaria from 2001 to 2019. The chapter states the high positive correlation
coefficient (R) = 0.81 and R = 0.77 between the yearly R2 of synthetic accuracy and
modelled yield accuracy for WW and OSR from 2001 to 2019, respectively. The chapter
analyses the impact of climate variables on crop yield predictions by observing an
increase in R2
(0.79 (WW)/0.86 (OSR)) and a decrease in RMSE (4.51/2.57 dt/ha) when
the climate effect is included in the model. The fifth chapter suggests that the coupling
of the LUE model to the random forest (RF) model can further reduce the relative root
mean square error (RRMSE) from -8% (WW) and -1.6% (OSR) and increase the R2 by
14.3% (for both WW and OSR), compared to results just relying on LUE. The same
chapter concludes that satellite-based crop biomass, solar radiation, and temperature
are the most influential variables in the yield prediction of both crop types. Chapter six
attempts to discuss both pros and cons of RS technology while analysing the impact of
land use diversity on crop-modelled biomass of WW and OSR. The chapter finds that
the modelled biomass of both crops is positively impacted by land use diversity to the
radius of 450 (Shannon Diversity Index ~0.75) and 1050 m (~0.75), respectively. The
chapter also discusses the future implications by stating that including some dependent
factors (such as the management practices used, soil health, pest management, and
pollinators) could improve the relationship of RS-modelled crop yields with
biodiversity. Lastly, chapter seven discusses testing the scope of new sensors such as
unmanned aerial vehicles, hyperspectral sensors, or Sentinel-1 SAR in RS for achieving
accurate crop yield predictions for precision farming. In addition, the chapter highlights
the significance of artificial intelligence (AI) or deep learning (DL) in obtaining higher
crop yield accuracies.
Grasslands shape many landscapes of the earth as they cover about one-third of its surface. They are home and provide livelihood for billions of people and are mainly used as source of forage for animals. However, grasslands fulfill many additional ecosystem functions next to fodder production, such as storage of carbon, water filtration, provision of habitats and cultural values. They play a role in climate change (mitigation) and in preserving biodiversity and ecosystem functions on a global scale. The degree to what these ecosystem functions are present within grassland ecosystems is largely determined by the management. Individual management practices and the use intensity influence the species composition as well as functions, like carbon storage, while higher use intensities (e.g. high mowing frequencies) usually show a negative impact. Especially in Central European countries, like in Germany, the determining influence of grassland management on its physiognomy and ecosystem functions leads to a large variability and small-scale alternations of grassland parcels. Large-scale information on the management and use intensity of grasslands is not available. Consequently, estimations of grassland ecosystem functions are challenging which, however, would be required for large-scale assessments of the status of grassland ecosystems and optimized management plans for the future. The topic of this thesis tackles this gap by investigating the major grassland management practice in Germany, which is mowing, for multiple years, in high spatial resolution
and on a national scale.
Earth Observation (EO) has the advantage of providing information of the earth’s surface on multi-temporal time steps. An extensive literature review on the use of EO for grassland management and production analyses, which was part of this thesis, showed that in particular research on grasslands consisting of small parcels with a large variety of management and use intensity, like common in Central Europe, is underrepresented. Especially
the launch of the Sentinel satellites in the recent past now enables the analyses of such grasslands due to their high spatial and temporal resolution. The literature review specifically on the investigation of grassland mowing events revealed that most previous studies focused on small study areas, were exploratory, only used one sensor type and/or lacked a reference data set with a complete range of management options.
Within this thesis a novel framework to detect grassland mowing events over large areas is presented which was applied and validated for the entire area of Germany for multiple years (2018–2021). The potential of both sensor types, optical (Sentinel-2) and Synthetic Aperture Radar (SAR) (Sentinel-1) was investigated regarding grassland mowing event detection. Eight EO parameters were investigated, namely the Enhanced Vegetation Index (EVI), the backscatter intensity and the interferometric (InSAR) temporal coherence for both available polarization modes (VV and VH), and the polarimetric (PolSAR) decomposition parameters Entropy, K0 and K1. An extensive reference data set was generated based on daily images of webcams distributed in Germany which resulted in mowing information
for grasslands with the entire possible range of mowing frequencies – from one to six in Germany – and in 1475 reference mowing events for the four years of interest.
For the first time a observation-driven mowing detection approach including data from Sentinel-2 and Sentinel-1 and combining the two was developed, applied and validated on large scale. Based on a subset of the reference data (13 grassland parcels with 44 mowing events) from 2019 the EO parameters were investigated and the detection algorithm
developed and parameterized. This analysis showed that a threshold-based change detection approach based on EVI captured grassland mowing events best, which only failed during periods of clouds. All SAR-based parameters showed a less consistent behavior to mowing events, with PolSAR Entropy and InSAR Coherence VH, however, revealing the
highest potential among them. A second, combined approach based on EVI and a SARbased parameter was developed and tested for PolSAR Entropy and InSAR VH. To avoid additional false positive detections during periods in which mowing events are anyhow reliably detected using optical data, the SAR-based mowing detection was only initiated
during long gaps within the optical time series (< 25 days). Application and validation of
these approaches in a focus region revealed that only using EVI leads to the highest accuracies (F1-Score = 0.65) as combining this approach with SAR-based detection led to a strong increase in falsely detected mowing events resulting in a decrease of accuracies (EVI + PolSAR ENT F1-Score = 0.61; EVI + InSAR COH F1-Score = 0.61).
The mowing detection algorithm based on EVI was applied for the entire area of Germany for the years 2018-2021. It was revealed that the largest share of grasslands with high mowing frequencies (at least four mowing events) can be found in southern/south-eastern Germany. Extensively used grassland (mown up to two times) is distributed within the entire country with larger shares in the center and north-eastern parts of Germany. These patterns stay constant in general, but small fluctuations between the years are visible. Early mown grasslands can be found in southern/south-eastern Germany – in line with high mowing frequency areas – but also in central-western parts. The years 2019 and 2020 revealed higher accuracies based on the 1475 mowing events of the multi-annual validation data set
(F1-Scores of 0.64 and 0.63), 2018 and 2021 lower ones (F1-Score of 0.52 and 0.50).
Based on this new, unprecedented data set, potential influencing factors on the mowing dynamics were investigated. Therefore, climate, topography, soil data and information on conservation schemes were related to mowing dynamics for the year 2020, which showed a high number of valid observations and detection accuracy. It was revealed that there are no strong linear relationships between the mowing frequency or the timing of the first mowing event and the investigated variables. However, it was found that for intensive grassland usage certain climatic and topographic conditions have to be fulfilled, while extensive grasslands appear on the entire spectrum of these variables. Further, higher mowing frequencies occur on soils with influence of ground water and lower mowing frequencies in protected areas. These results show the complex interplay between grassland mowing dynamics and external influences and highlight the challenges of policies aiming to protect grassland ecosystem functions and their need to be adapted to regional circumstances.
Die städtische Umwelt ist in steter Veränderung, vor allem durch den Bau, aber auch durch die Zerstörung von städtischen Elementen. Die formelle Entwicklung ist ein Prozess mit langen Planungszeiträumen und die bebaute Landschaft wirkt daher statisch. Dagegen unterliegen informelle oder spontane Siedlungen aufgrund ihrer stets unvollendeten städtischen Form einer hohen Dynamik – so wird in der Literatur berichtet. Allerdings sind Dynamik und die morphologischen Merkmale der physischen Transformation in solchen Siedlungen, die städtische Armut morphologisch repräsentieren, auf globaler Ebene bisher kaum mit einer konsistenten Datengrundlage empirisch untersucht worden. Hier setzt die vorliegende Arbeit an. Unter der Annahme, dass die erforschte zeitliche Dynamik in Europa geringer ausfällt, stellt sich die generelle Frage nach einer katalogisierten Erfassung physischer Wohnformen von Armut speziell in Europa. Denn Wohnformen der Armut werden oft ausschließlich mit dem ‚Globalen Süden‘ assoziiert, insbesondere durch die Darstellung von Slums. Tatsächlich ist Europa sogar die Wiege der Begriffe ‚Slum‘ und ‚Ghetto‘, die vor Jahrhunderten zur Beschreibung von Missständen und Unterdrückung auftauchten. Bis heute weist dieser facettenreiche Kontinent eine enorme Vielfalt an physischen Wohnformen der Armut auf, die ihre Wurzeln in unterschiedlichen Politiken, Kulturen, Geschichten und Lebensstilen haben. Um über diese genannten Aspekte Aufschluss zu erlangen, bedarf es u.a. der Bildanalyse durch Satellitenbilder. Diese Arbeit wird daher mittels Fernerkundung bzw. Erdbeobachtung (EO) sowie zusätzlicher Literaturrecherchen und einer empirischen Erhebung erstellt. Um Unsicherheiten konzeptionell und in der Erfassung offenzulegen, ist die Methode der manuellen Bildinterpretation von Armutsgebieten kritisch zu hinterfragen.
Das übergeordnete Ziel dieser Arbeit ist eine bessere Wissensbasis über Armut zu schaffen, um Maßnahmen zur Reduzierung von Armut entwickeln zu können. Die Arbeit dient dabei als eine Antwort auf die Nachhaltigkeitsziele der Vereinten Nationen. Es wird Grundlagenforschung betrieben, indem Wissenslücken in der Erdbeobachtung zu physisch-baulichen bzw. morphologischen Erscheinungen von Armut auf Gebäude-Ebene explorativ analysiert werden. Die Arbeit wird in drei Forschungsthemen bzw. Studienteile untergliedert:
Ziel des ersten Studienteils ist die globale raumzeitliche Erfassung von Dynamiken durch Anknüpfung an bisherige Kategorisierungen von Armutsgebieten. Die bisherige Wissenslücke soll gefüllt werden, indem über einen Zeitraum von etwa sieben Jahren in 16 dokumentierten Manifestationen städtischer Armut anhand von Erdbeobachtungsdaten eine zeitliche Analyse der bebauten Umwelt durchgeführt wird. Neben einer global verteilten Gebietsauswahl wird die visuelle Bildinterpretation (MVII) unter Verwendung von hochauflösenden optischen Satellitendaten genutzt. Dies geschieht in Kombination mit in-situ- und Google Street View-Bildern zur Ableitung von 3D-Stadtmodellen. Es werden physische Raumstrukturen anhand von sechs räumlichen morphologischen Variablen gemessen: Anzahl, Größe, Höhe, Ausrichtung und Dichte der Gebäude sowie Heterogenität der Bebauung. Diese ‚temporale Analyse‘ zeigt zunächst sowohl inter- als auch intra-urbane Unterschiede. Es lassen sich unterschiedliche, aber generell hohe morphologische Dynamiken zwischen den Untersuchungsgebieten finden. Dies drückt sich in vielfältiger Weise aus: von abgerissenen und rekonstruierten Gebieten bis hin zu solchen, wo Veränderungen innerhalb der gegebenen Strukturen auftreten. Geographisch gesehen resultiert in der Stichprobe eine fortgeschrittene Dynamik, insbesondere in Gebieten des Globalen Südens. Gleichzeitig lässt sich eine hohe räumliche Variabilität der morphologischen Transformationen innerhalb der untersuchten Gebiete beobachten. Trotz dieser teilweise hohen morphologischen Dynamik sind die räumlichen Muster von Gebäudefluchten, Straßen und Freiflächen überwiegend konstant. Diese ersten Ergebnisse deuten auf einen geringen Wandel in Europa hin, weshalb diese europäischen Armutsgebiete im folgenden Studienteil von Grund auf erhoben und kategorisiert werden.
Ziel des zweiten Studienteils ist die Erschaffung einer neuen Kategorisierung, speziell für das in der Wissenschaft unterrepräsentierte Europa. Die verschiedenen Formen nicht indizierter Wohnungsmorphologien werden erforscht und kategorisiert, um das bisherige globale wissenschaftliche ontologische Portfolio für Europa zu erweitern. Hinsichtlich dieses zweiten Studienteils bietet eine Literaturrecherche mit mehr als 1.000 gesichteten Artikeln die weitere Grundlage für den folgenden Fokus auf Europa. Auf der Recherche basierend werden mittels der manuellen visuellen Bildinterpretation (engl.: MVII) erneut Satellitendaten zur Erfassung der physischen Morphologien von Wohnformen genutzt. Weiterhin kommen selbst definierte geographische Indikatoren zu Lage, Struktur und formellem Status zum Einsatz. Darüber hinaus werden gesellschaftliche Hintergründe, die durch Begriffe wie ‚Ghetto‘, ‚Wohnwagenpark‘, ‚ethnische Enklave‘ oder ‚Flüchtlingslager‘ beschrieben werden, recherchiert und implementiert. Sie sollen als Erklärungsansatz für Armutsviertel in Europa dienen. Die Stichprobe der europäischen, insgesamt aber unbekannten Grundgesamtheit verdeutlicht eine große Vielfalt an physischen Formen: Es wird für Europa eine neue Kategorisierung von sechs Hauptklassen entwickelt, die von ‚einfachsten Wohnstätten‘ (z. B. Zelten) über ‚behelfsmäßige Unterkünfte ‘ (z. B. Baracken, Container) bis hin zu ‚mehrstöckigen Bauten‘ - als allgemeine Taxonomie der Wohnungsnot in Europa - reicht. Die Untersuchung zeigt verschiedene Wohnformen wie z. B. unterirdische oder mobile Typen, verfallene Wohnungen oder große Wohnsiedlungen, die die Armut im Europa des 21. Jahrhunderts widerspiegeln. Über die Wohnungsmorphologie hinaus werden diese Klassen durch die Struktur und ihren rechtlichen Status beschrieben - entweder als geplante oder als organisch-gewachsene bzw. weiterhin als formelle, informelle oder hybride (halblegale) Formen. Geographisch lassen sich diese ärmlichen Wohnformen sowohl in städtischen als auch in ländlichen Gebieten finden, mit einer Konzentration in Südeuropa. Der Hintergrund bei der Mehrheit der Morphologien betrifft Flüchtlinge, ethnische Minderheiten und sozioökonomisch benachteiligte Menschen - die ‚Unterprivilegierten‘.
Ziel des dritten Studienteils ist eine kritische Analyse der Methode. Zur Erfassung all dieser Siedlungen werden heutzutage Satellitenbilder aufgrund der Fortschritte bei den Bildklassifizierungsmethoden meist automatisch ausgewertet. Dennoch spielt die MVII noch immer eine wichtige Rolle, z.B. um Trainingsdaten für Machine-Learning-Algorithmen zu generieren oder für Validierungszwecke. In bestimmten städtischen Umgebungen jedoch, z.B. solchen mit höchster Dichte und struktureller Komplexität, fordern spektrale und textur-basierte Verflechtungen von überlappenden Dachstrukturen den menschlichen Interpreten immer noch heraus, wenn es darum geht einzelne Gebäudestrukturen zu erfassen. Die kognitive Wahrnehmung und die Erfahrung aus der realen Welt sind nach wie vor unumgänglich. Vor diesem Hintergrund zielt die Arbeit methodisch darauf ab, Unsicherheiten speziell bei der Kartierung zu quantifizieren und zu interpretieren. Kartiert werden Dachflächen als ‚Fußabdrücke‘ solcher Gebiete. Der Fokus liegt dabei auf der Übereinstimmung zwischen mehreren Bildinterpreten und welche Aspekte der Wahrnehmung und Elemente der Bildinterpretation die Kartierung beeinflussen. Um letztlich die Methode der MVII als drittes Ziel selbstkritisch zu reflektieren, werden Experimente als sogenannte ‚Unsicherheitsanalyse‘ geschaffen. Dabei digitalisieren zehn Testpersonen bzw. Probanden/Interpreten sechs komplexe Gebiete. Hierdurch werden quantitative Informationen über räumliche Variablen von Gebäuden erzielt, um systematisch die Konsistenz und Kongruenz der Ergebnisse zu überprüfen. Ein zusätzlicher Fragebogen liefert subjektive qualitative Informationen über weitere Schwierigkeiten. Da die Grundlage der hierfür bisher genutzten Kategorisierungen auf der subjektiven Bildinterpretation durch den Menschen beruht, müssen etwaige Unsicherheiten und damit Fehleranfälligkeiten offengelegt werden. Die Experimente zu dieser Unsicherheitsanalyse erfolgen quantifiziert und qualifiziert. Es lassen sich generell große Unterschiede zwischen den Kartierungsergebnissen der Probanden, aber eine hohe Konsistenz der Ergebnisse bei ein und demselben Probanden feststellen. Steigende Abweichungen korrelieren mit einer steigenden baustrukturellen (morphologischen) Komplexität. Ein hoher Grad an Individualität bei den Probanden äußert sich in Aspekten wie z.B. Zeitaufwand beim Kartieren, in-situ Vorkenntnissen oder Vorkenntnissen beim Umgang mit Geographischen Informationssystemen (GIS). Nennenswert ist hierbei, dass die jeweilige Datenquelle das Kartierungsverfahren meist beeinflusst. Mit dieser Studie soll also auch an der Stelle der angewandten Methodik eine weitere Wissenslücke gefüllt werden. Die bisherige Forschung komplexer urbaner Areale unter Nutzung der manuellen Bildinterpretation implementiert oftmals keine Unsicherheitsanalyse oder Quantifizierung von Kartierungsfehlern. Fernerkundungsstudien sollten künftig zur Validierung nicht nur zweifelsfrei auf MVII zurückgreifen können, sondern vielmehr sind Daten und Methoden notwendig, um Unsicherheiten auszuschließen.
Zusammenfassend trägt diese Arbeit zur bisher wenig erforschten morphologischen Dynamik von Armutsgebieten bei. Es werden inter- wie auch intra-urbane Unterschiede auf globaler Ebene präsentiert. Dabei sind allgemein hohe morphologische Transformationen zwischen den selektierten Gebieten festzustellen. Die Ergebnisse deuten auf einen grundlegenden Kenntnismangel in Europa hin, weshalb an dieser Stelle angeknüpft wird. Eine über Europa verteilte Stichprobe erlaubt eine neue morphologische Kategorisierung der großen Vielfalt an gefundenen physischen Formen. Die Menge an Gebieten erschließt sich in einer unbekannten Grundgesamtheit. Zur Datenaufbereitung bisheriger Analysen müssen Satellitenbilder manuell interpretiert werden. Das Verfahren birgt Unsicherheiten. Als kritische Selbstreflexion zeigt eine Reihe von Experimenten signifikante Unterschiede zwischen den Ergebnissen der Probanden auf, verdeutlicht jedoch bei ein und derselben Person Beständigkeit.
Regional climate models (RCMs) are tools used to project future climate change at a regional scale. Despite their high horizontal resolution, RCMs are characterized by systematic biases relative to observations, which can result in unrealistic interpretations of future climate change signals. On the other hand, bias correction (BC) is a popular statistical post-processing technique applied to improve the usability of output from climate models. Like every other statistical technique, BC has its strengths and weaknesses. Hence, within the regional context of Germany, and for temperature and precipitation, this study is dedicated to the assessment of the impact of different BC techniques on the RCM output. The focuses are on the impact of BC on the RCM’s statistical characterization, and physical consistency defined as the spatiotemporal consistency between the bias-corrected variable and the simulated physical mechanisms governing the variable, as well as the correlations between the bias-corrected variable and other (simulated) climate variables. Five BC techniques were applied in adjusting the systematic biases in temperature and precipitation RCM outputs. The BC techniques are linear scaling, empirical quantile mapping, univariate quantile delta mapping, multivariate quantile delta mapping that considers inter-site dependencies, and multivariate quantile delta mapping that considers inter-variable dependencies (MBCn). The results show that each BC technique adds value in reducing the biases in the statistics of the RCM output, though the added value depends on several factors such as the temporal resolution of the data, choice of RCM, climate variable, region, and the metric used in evaluating the BC technique. Further, the raw RCMs reproduced portions of the observed modes of atmospheric circulation in Western Europe, and the observed temperature, and precipitation meteorological patterns in Germany. After the BC, generally, the spatiotemporal configurations of the simulated meteorological patterns as well as the governing large-scale mechanisms were reproduced.
However, at a more localized spatial scale for the individual meteorological patterns, the BC changed the simulated co-variability of some grids, especially for precipitation. Concerning the co-variability among the variables, a physically interpretable positive correlation was found between temperature and precipitation during boreal winter in both models and observations. For most grid boxes in the study domain and on average, the BC techniques that do not adjust inter-variable dependency did not notably change the simulated correlations between the climate variables. However, depending on the grid box, the (univariate) BC techniques tend to degrade the simulated temporal correlations between temperature and precipitation. Further, MBCn which adjusts biases in inter-variable dependency has the skill to improve the correlations between the simulated variables towards observations.
Die Bodenfeuchte stellt eine essenzielle Variable für den Energie-, Feuchte- und Stoffaustausch zwischen Landoberfläche und Atmosphäre dar. Ihre Auswirkungen auf Temperatur und Niederschlag sind vielfältig und komplex. Die in Klimamodellen verwendeten Schemata zur Simulation der Bodenfeuchte, auch bodenhydrologische Schemata genannt, sind aufgrund des Ursprungs der Klimamodelle aus Wettermodellen jedoch häufig sehr stark vereinfacht dargestellt.
Bei Klimamodellen, die Simulationen mit einer groben Auflösung von mehreren Zehner- oder Hunderterkilometern rechnen, können viele Prozesse vernachlässigt werden. Da die Auflösung der Klimamodelle jedoch stetig steigt und mittlerweile beim koordinierten Projekt regionaler Klimamodelle CORDEX-CORE standardmäßig bei 0.22° Kantenlänge liegt, müssen auch höher aufgelöste Daten und mehr Prozesse simuliert werden. Dies gilt erst recht mit Blick auf konvektionsauflösende Simulationen mit wenigen Kilometern Kantenlänge. Mit steigenden Modellauflösungen steigt zugleich die Komplexität und Differenziertheit der Fragestellungen, die mit Hilfe von Klimamodellen beantwortet werden sollen. An diesem Punkt setzt auch das Projekt BigData@Geo an, in dessen Rahmen die vorliegende Arbeit entstand. Ziel dieses Projektes ist es, hochaufgelöste Klimainformationen für den bayerischen Regierungsbezirk Unterfranken für Akteure aus der Land- und Forstwirtschaft sowie dem Weinbau zur Verfügung zu stellen.
Auf diesen angewandten und grundlegenden Anforderungen und Zielsetzungen basierend, bedarf auch das in dieser Arbeit verwendete regionale Klimamodell REMO (Version 2015) der weiteren Entwicklung. So ist das Hauptziel der Arbeit das bestehende einschichtige bodenhydrologische Schema durch ein mehrschichtiges zu ersetzen. Der Vorteil mehrerer simulierter Bodenschichten besteht darin, dass nun die vertikale Bewegung des Wassers in Form von Versickerung und kapillarem Aufstieg simuliert werden kann. Dies geschieht auf der Basis bodenhydrologischer Parameter, deren Wert in Abhängigkeit vom Boden und der Bodenfeuchte über die Wasserrückhaltekurve bestimmt wird. Für diese Kurve existieren verschiedene Parametrisierungen, von denen die Ansätze von Clapp-Hornberger und van Genuchten verwendet wurden. Außerdem kann die Bodenfeuchte nun bis zu einer Tiefe von circa 10 m beziehungsweise der Tiefe des anstehenden Gesteins simuliert werden. Damit besteht im Gegensatz zum vorherigen Schema, dessen Tiefe auf die Wurzeltiefe beschränkt ist, die Möglichkeit, dass Wasser auch unterhalb der Wurzeln zur Verfügung stehen kann und somit die absolute im Boden verfügbare Wassermenge zunimmt. Die Schichtung erlaubt darüber hinaus die Verdunstung aus unbewachsenem Boden lediglich auf Basis des in der obersten Schicht verfügbaren Wassers. Ein weiterer Prozess, der dank der Schichtung und der weiter unten erläuterten Datensätze neu parametrisiert werden kann, ist die Infiltration.
Für die Verwendung des Schemas sind Informationen über bodenhydrologische Parameter, die Wurzeltiefe und die Tiefe bis zum anstehenden Gestein erforderlich. Entsprechende Datensätze müssen hierfür aufbereitet und in das Modell eingebaut werden. Bezüglich der Wurzeltiefe wurden drei sich bezüglich der Tiefe, der Definition und der verfügbaren Auflösung stark voneinander unterscheidende Datensätze verglichen. Letztendlich wird die Wurzeltiefe aus dem mit einer anderen REMO-Version gekoppelten Vegetationsmodul iMOVE verwendet, da zukünftig eine Kopplung dieses Moduls mit dem mehrschichtigen Boden geplant ist und die Wurzeltiefen damit konsistent sind. Zudem ist die zugrundeliegende Auflösung der Daten hoch und es werden maximale Wurzeltiefen berücksichtigt, die besonders wichtig für die Simulation von Landoberfläche-Atmosphäre-Interaktionen sind. Diese Vorteile brachten die anderen Datensätze nicht mit. In der finalen Modellversion werden für die Tiefe bis zum anstehenden Gestein und die Korngrößenverteilungen die Daten von SoilGrids verwendet. Ein Vergleich mit anderen Bodendatensätzen fand in einer parallel laufenden Dissertation statt (Ziegler 2022). Bei SoilGrids ist hervorzuheben, dass die Korngrößenverteilungen in einer hohen räumlichen Auflösung (1 km^2 oder höher) und mit mehreren vertikalen Schichten vorliegen. Gegenüber dem ursprünglich in REMO verwendeten Datensatz mit einer Kantenlänge von 0.5° und ohne vertikale Differenzierung ist dies eine starke Verbesserung der Eingangsdaten. Dazu kommt, dass die Korngrößenverteilungen die Verwendung kontinuierlicher Pedotransferfunktionen statt fünf diskreter Texturklassen, denen für die bodenhydrologischen Parameter fixe Tabellenwerte zugewiesen werden, ermöglichen. Dies führt zu einer deutlich besseren Differenzierung des heterogenen Bodens.
Im Rahmen der Arbeit wurden insgesamt 19 Simulationen für Europa und ein erweitertes Deutschlandgebiet mit Auflösungen von 0.44° beziehungsweise 0.11° für den Zeitraum 2000 bis 2018 gerechnet. Dabei zeigte sich, dass die Einführung des mehrschichtigen Bodenschemas gegenüber dem einschichtigen Schema zu einer Verringerung der Bodenfeuchte in der Wurzeltiefe führt. Nichtsdestotrotz nimmt die absolute Wassermenge des Bodens durch die Berücksichtigung des Bodens unterhalb der Wurzelzone zu. Bezogen auf die einzelnen Schichten wird die Bodenfeuchte damit zwar unterschätzt, im Laufe der Modellentwicklung kann jedoch eine Verbesserung im Vergleich zu ERA5 erzielt werden. Das neue Schema führt zu einer Verringerung der Evapotranspiration, die über alle Schritte der Modellentwicklung und besonders während der Sommermonate auftritt. Im Vergleich zu Validationsdaten von ERA5 und GLEAM zeigt sich, dass dies eine Verbesserung dieser Größe bedeutet, die sowohl in der Fläche als auch beim Fehler und in der Verteilung auftritt.
Gleiches lässt sich für den Oberflächenabfluss sagen. Hierfür implementierte Schemata (Philip, Green-Ampt), die anders als das standardmäßig verwendete Improved-Arno-Schema bodenhydrologische Parameter berücksichtigen, konnten eine weitere Verbesserung im Flachland zeigen. In Gebirgsregionen nahm der Fehler durch die nicht enthaltene Berücksichtigung der Hangneigung jedoch zu, sodass in der finalen Modellversion auf das Improved-Arno-Schema zurückgegriffen wurde. Die Temperatur steigt durch die ursprüngliche Version des mehrschichtigen Schemas zunächst an, was zu einer Über- statt der vorherigen Unterschätzung gegenüber E-OBS führt. Die Modellentwicklung resultiert zwar in einer Reduzierung der Temperatur, jedoch fällt diese zu stark aus, sodass der Temperaturfehler letztendlich größer als in der einschichtigen Modellversion ist. Da die Evapotranspiration jedoch maßgeblich verbessert wurde, kann dieser Fehler eventuell auf ein übermäßiges Tuning der Temperatur zurückgeführt werden.
Die Betrachtung von Hitzeereignissen am Beispiel der Sommer 2003 und 2018 hat gezeigt, dass die Modellentwicklung dazu beiträgt, diese Ereignisse besser als das einschichtige Schema zu simulieren. Zwar trifft dies nicht auf das räumliche Verhalten der mittleren Temperatur zu, jedoch auf deren zeitlichen Verlauf. Hinzu kommt die bessere Simulation der täglichen Extrem- und besonders der Minimaltemperatur, was zu einer Erhöhung der täglichen Temperaturspanne führt. Diese wird von Klimamodellen in der Regel zu stark unterschätzt.
Durch die Berücksichtigung der vertikalen Wasserflüsse hat sich jedoch auch gezeigt, dass noch enormes Entwicklungspotenzial mit Blick auf (boden)hydrologische Prozesse besteht. Dies gilt in besonderem Maße für zukünftige Simulationen mit konvektionserlaubender Auflösung. So sollten subskalige Informationen des Bodens und der Orographie berücksichtigt werden. Dies dient einerseits der Repräsentation vorliegender Heterogenitäten und kann andererseits, wie am Beispiel der Infiltrationsschemata dargelegt, zur Verbesserung bestehender Prozesse beitragen. Da die simulierte Drainage durch das mehrschichtige Bodenschema im gleichen Maße zu- wie der Oberflächenabfluss abnimmt und das Wasser dem Modell in der Folge nicht weiter zur Verfügung steht, sollte zukünftig auch Grundwasser im Modell berücksichtigt werden. Eine Vielzahl von Studien konnte einen Mehrwert durch die Implementierung dieser Variable und damit verbundener Prozesse feststellen. Mittelfristig ist jedoch insgesamt die Kopplung an ein hydrologisches Modell zu empfehlen, um die bei hochauflösenden Simulationen relevanten Prozesse angemessen repräsentieren zu können. Hierfür bieten sich beispielsweise ParFlow oder mHM an.
Insgesamt ist festzuhalten, dass das mehrschichtige Bodenschema einen Mehrwert liefert, da schwer zu simulierende und in der Postprozessierung zu korrigierende Variablen wie die Evapotranspiration und der Oberflächenabfluss deutlich besser modelliert werden können als mit dem einschichtigen Schema. Dies gilt auch für die Extremtemperaturen. Beides ist klar auf die Schichtung des Bodens und damit einhergehender Prozesse zurückzuführen. Bezüglich der Daten zeigt sich, dass die Wurzeltiefe, die Berücksichtigung von SoilGrids und die vertikale Bodeninformation für die weitere Optimierung verantwortlich sind. Darüber hinaus ist der höhere Informationsgehalt, der anhand der geschichteten Bodenfeuchte zur Verfügung steht, ebenfalls als Mehrwert einzustufen.
The Seville Strategy spurred a signifi cant paradigm shift in UNESCO’s MAB Programme, re-conceptualising the research programme as a modern tool for the dual mandate of nature conservation and sustainable development. However, many biosphere reserves failed to comply with the new regulations and in 2013 the ‘Exit Strategy’ was announced to improve the quality of the global network.
This study presents a global assessment of the implementation of the quality enhancement strategies, highlighting signifi cant differences worldwide through 20 country-specifi c case studies. It concludes that the strategies have been fundamental in improving the credibility and coherence of the MAB Programme. Challenges in the implementation were not unique to individual countries but were common to all Member States with pre-Seville sites, and in many states the process has led to a rejuvenation of national biosphere reserve networks.