Refine
Has Fulltext
- yes (11)
Is part of the Bibliography
- yes (11) (remove)
Year of publication
Document Type
- Doctoral Thesis (11)
Keywords
- Perylenbisimid (11) (remove)
Institute
In der vorliegenden Dissertation wurden Dispergierungseffizienz, Entbündelungseffizienz und
Röhrenqualität von SWNT-Suspensionen untersucht. Die Röhrenqualität wurde durch Messung von Quantenausbeuten bewertet. Außerdem wurden Suspensionen von den drei verschiedenen Rohmaterialien CoMoCAT, Black Sand und HiPCO, hergestellt durch die Behandlung mit Ultraschall und Schermischen, verglichen.
Beim Beschallen zeigte sich wie erwartet eine höhere Dispergierungseffizienz im Vergleich zum Schermischen. Diese war jeweils bei Black Sand am größten, gefolgt von CoMoCAT und HiPCO. Ein Vergleich zwischen zwei HiPCO-Materialien bestätigte die deutlichen Effizienzvorteile
nicht aufgereinigter Materialien. Trotz der viel geringeren Dichte des aufgereinigten HiPCO-Materials, ließ sich dieses durch das Schermischen wesentlich schlechter dispergieren.
Der Effizienzunterschied war jedoch geringer als bei Black Sand und CoMoCAT, was vermutlich auf den geringeren Unterschied der Kohlenstoffanteile zurückzuführen ist. Dieser wiederum hängt von den jeweiligen Herstellungs- und Aufreinigungsverfahren ab.
Die Dispergierungsgeschwindigkeit war für gescherte Black Sand- und CoMoCAT-Proben zu Beginn der Dispergierung höher als für die jeweils beschallten Proben, weshalb durch Kombination der beiden Methoden möglicherweise eine Verbesserung der präparierten Suspensionen bezüglich der drei untersuchten Parameter erreicht werden kann.
Der Vergleich der Entbündelungseffizienzen ergab erneut Vorteile beim Ultraschall gegenüber dem Schermischen. Die beschallten Black Sand- und HiPCO-Proben zeigten hierbei noch eine deutlich effizientere Auftrennung als die Proben des aufgereinigten CoMoCAT-Materials.
Dieses enthält zu jedem Zeitpunkt der Beschallung noch einen entsprechend größeren Anteil an aggregierten Röhren. Beim Schermischen funktionierte die Entbündelung von Black Sand im Vergleich zu CoMoCAT und HiPCO mit Abstand am besten, was sich auch in den ODVerhältnissen
beschallter und gescherter Proben widerspiegelte.
Die beobachtete Quantenausbeute war bei den durch Schermischen dispergierten DGUEinzelrohrproben
um bis zu 50 % höher als bei den beschallten Proben, was auf eine deutlich niedrigere Röhrenbeschädigung und somit auch auf eine höhere Röhrenqualität hindeutete.
Dies wurde auch durch Vergleichsmessungen an Einzelröhren bestätigt. Außerdem dringt bei durch Ultraschall geschnittenen Röhren Wasser ins Röhreninnere ein, was beim Schermischen nicht der Fall ist. Das ermöglicht durch Schermischen vielleicht die Herstellung von Proben mit veränderten Eigenschaften. Beim Vergleich der Materialien zeigte HiPCO die höchste Quantenausbeute. Dieses Herstellungsverfahren liefert also im Vergleich zum
CoMoCAT-Verfahren eine bessere Röhrenqualität. Die um 70 % höheren Quantenausbeuten der Black Sand-Proben im Vergleich zu den CoMoCAT-Proben machten die Röhrenbeschädigungen
bei der Aufreinigung des Rohmaterials deutlich. Werden zudem Beschädigungen durch Ultraschall berücksichtigt, beträgt der Unterschied sogar 250 %.
Die beschallten HiPCO- und Black Sand-Proben der zeitabhängigen Messungen zeigten aufgrund der effizienten Entbündelung den schnellsten Anstieg der uantenausbeuten, welche aufgrund von Beschädigungen durch den Ultraschall, beeinflusst durch die Entbündelungsund
Dispergierungseffizienzen der Materialien, nach 10-20 min wieder abfielen. Die Quantenausbeuten der gescherten Proben stiegen entsprechend langsamer über die gesamte Messzeit von sechs Stunden an.
Die Dispergierung mittels Schermischer bei erhöhter Viskosität führte bei einem Iodixanolanteil von 45 % zu einer fast sechsfach höheren Dispergierungseffizienz im Vergleich zu Wasser.
Auch Lufteinschlüsse scheinen einen Einfluss zu haben, weshalb ein Probenvolumen zwischen 13-14 mL mit dem verwendeten Aufbau am sinnvollsten erscheint. Ob Viskosität und Lufteinschlüsse auch Entbündelungseffizienz und Röhrenqualität beeinflussen, muss noch untersucht werden.
In Kapitel 5 wurde die Dispergierung von Nanoröhren mit kationischem Perylenbisimid untersucht. Nach dem Zusammengeben von PBI-Lösung und SDS-Nanorohrsuspension wurden Flokkulationseffekte beobachtet, welche durch hohe Nanorohr- oder SDS-Konzentrationen verzögert wurden. Das ermöglichte die Herstellung von PBI-Nanorohrfilmen mit Streifenmuster durch Nutzung des Kaffeering-Effektes. Es wurde gezeigt, dass die Nanoröhren in das PBI eingebettet werden können. Allerdings waren die Streifen noch sehr unregelmäßig und die Röhren in den Streifen nicht ausgerichtet.
Die Stabilität der PBI-Nanorohrsuspensionen konnte durch einen Tensidaustausch vom anionischen SDS zum kationischen CTAB verbessert werden. Es konnte gezeigt werden, dass für die Vermeidung von Aggregationen während den dafür nötigen Dialysen unter anderem die möglichst geringe Bewegung der Probe entscheidend ist. Außerdem musste die CTABKrafft-Temperatur von 25 °C berücksichtigt werden. Unterhalb dieser Temperatur bildet das
Tensid keine Mizellen mehr, was die Suspensionen destabilisiert.
Mischexperimente von CTAB-Nanorohrsuspensionen mit Lösungen aus verschiedenen CTAB:PBI-Verhältnissen lieferten Hinweise darauf, dass CTAB alleine die Röhren nicht stabilisiern kann. Ein Grund dafür könnte eine zu geringe Anzahl an positiven Ladungen auf den Röhren sein. Demzufolge wäre immer ein gewisser Anteil an Tensid zur Stabilisierung notwendig. Trotz geringer Tensidbeimischung könnten aber Filme mit in PBI eingebetteten Röhren hergestellt werden. Unter Umständen könnten die Röhren auch in die flüssigkristalline Phase des PBIs eingebettet werden. Ein anderer Grund für die nicht ausreichende Stabilisierung könnte sein, dass die PBI-Aggregate nur sehr schlecht aufgetrennt werden.
Dann könnte das PBI-Adsorptionsverhalten durch eine Verbesserung der Aggregatauftrennung beeinflusst werden.
Zuletzt wurde in der vorliegenden Dissertation die Herstellung von Nanorohrgelfilmen beschrieben.
Neben Homogenität durch Nutzung von Gelatine und Stabilität durch Entfernung von Iodixanol sorgte eine Silikonform für eine einheitliche Dicke und Größe der präparierten (6,5)-Gelfilme. Röhrenaggregationen während der Iodixanolentfernung durch Zentrifugenfiltration
konnten auf die Alterung der verwendeten Suspensionen zurückgeführt werden. Die optischen Dichten der so hergestellten Gelfilme standen immer in ähnlichen Verhältnissen zu denen der Ausgangssuspensionen, sodass die für die Gelfilme benötigten Röhrenkonzentrationen
in den Ausgangssuspensionen relativ genau berechnet werden konnten.
Um das Iodixanol für die Herstellung von (6,5)/(6,4)-Gelfilmen effektiv aus den Suspensionen zu entfernen, wurden drei verschiedene Dialysemembranen getestet. Dabei stellte sich die Membran mit einer Porengröße von 50 kD als bester Kompromiss aus effektiver Iodixanolentfernung
und geringem Röhrenverlust heraus. Durch Einengung der (6,5)/(6,4)-Suspension konnten drei Gelfilme mit ausreichend hohen optischen Dichten hergestellt werden, wobei der dritte Film im Gegensatz zu den ersten beiden aufgrund des immer weiter abnehmenden Probenvolumens eine deutliche Röhrenaggregation zeigt. Dadurch eignen sie sich für weiterführende Experimente, wo mit Hilfe der Transienten-Absorptionsspektroskopie Untersuchungen
zu Energie- und Ladungstransferprozessen zwischen CNTs verschiedener Chiralitäten durchgeführt werden könnten.
In conclusion, the present thesis demonstrates that the highly desired J-type aggregation of functional perylene bisimide chromophores can be achieved by proper design of monomeric building blocks that direct self-assemble by mutual effects of hydrogen bonding and pi-pi interaction, and on the other hand, are prevented to assemble in columnar stacks owing to their twisted pi-conjugated core and sterically demanding substituents. Furthermore, the self-assembly studies gave new insights into the dynamic aggregation process of low-dimensional extended assemblies with strongly excitonically coupled chromophores. The relationship between commonly known cyanine dye aggregates like that of THIATS and that of the present PBI 1a was investigated by absorption and fluorescence spectroscopy at low temperatures down to 5 K. The formerly unprecedented functional properties of PBI aggregates that are expressed in J-type excitonic coupling hold promise for application in optoelectronic and photovoltaic devices.
The research presented in this thesis illustrates that self-assembly of organic molecules guided by intermolecular forces is a versatile bottom-up approach towards functional materials. Through the specific design of the monomers, supramolecular architectures with distinct spatial arrangement of the individual building blocks can be realized. Particularly intriguing materials can be achieved when applying the supramolecular approach to molecules forming liquid-crystalline phases as these arrange in ordered, yet mobile structures. Therefore, they exhibit anisotropic properties on a macroscopic level. It is pivotal to precisely control the interchromophoric arrangement as functions originate in the complex structures that are formed upon self-assembly. Consequently, the aim of this thesis was the synthesis and characterization of liquid-crystalline phases with defined supramolecular arrangements as well as the investigation of the structure-property relationship. For this purpose, perylene bisimide and diketopyrrolopyrrole chromophores were used as they constitute ideal building blocks towards functional supramolecular materials due to their thermal stability, lightfastness, as well as excellent optical and electronic features desirable for the application in, e.g., organic electronics.
This thesis deals with the synthesis of improved organic semiconductors, the detailed investigation of the molecular properties and the solid state arrangements revealed by single crystal X-ray diffraction and finally the development of structureperformance dependencies by measuring of the charge carrier mobilities of the derivatives in thin film transistors. The two main-goals of this thesis were achieved. Well soluble acene derivatives for spin-coated TFTs were obtained, showing charge carrier mobilities in the range of polymer p-type materials. Novel core-fluorinated perylene bisimide dyes were synthesized particularly and the use of electron deficient substituents lead to PBIs with outstanding air-stable mobilities in thin film transistors prepared by vacuum deposition techniques. The relationship between performance, air stability and solid state packing was elucidated in detail by single crystal X-ray diffraction analysis.
The covalent linkage of the aryloxy-substituents through macrocyclisation was applied for the synthesis of perylene bisimide atropo-enantiomers. The synthesis of macrocyclic perylene bisimides was achieved by using a tetra(3-hydroxyphenoxy)-functionalized perylene bisimide with achiral 2,6-diisopropylphenyl as imide substituent through Williamson´s etherfication which could be realized for four different oligoethylene glycol bridging units. Two regioisomeric macrocycles, namely the diagonally bridged (1,7- and 6,12- linkage) and the laterally bridged (1,12- and 6,7-linkage) isomers, were obtained for each bridging unit. The structural assignment of the isolated regioisomeric macrocycles was unambiguously accomplished by X-ray analysis of two macrocycles and by 1H NMR spectroscopy for all isomers. The conformational influence of the aryloxy-substituents on the functional properties of this class of chromophores could be derived by comparison of the optical and electrochemical properties of all isolated macrocylces with those of an open-chained reference compound. It was shown that the aryloxy-substituents prefer a lateral conformation in solution. Furthermore, solvent dependent fluorescence studies indicated that a photoinduced electron transfer process is of importance for the fluorescence quenching of electron-rich aryloxy-substituted perylene bisimides. The resolution of the atropo-diastereomers of diagonally bridged macrocyclic perylene bisimides with chiral 2-(R)-octylamine as imide substituent and diethylene glycol bridging units could be accomplished by semi-preparative HPLC on a chiral column. The chiroptical properties of the isolated epimerically pure macrocycles were determined by CD spectroscopy. Based on the experimental CD spectra, the stereochemical assignment of the isolated epimers was accomplished by application of the excition chirality method and confirmed by quantum chemical calculation of the CD spectra. The synthetical concept was extended successfully to 1,7-diaryloxy-substituted perylene bisimides. The structure of the diagonally bridged macrocycle was unambiguously confirmed by X-ray analysis and NMR spectroscopy. The atropo-enantiomers of this macrocycle could be resolved by semi-preparative HPLC on a chiral column and the assignment of the absolute configuration was achieved by comparison of the CD spectra of the resolved enantiomers with those of epimerically pure bis(macrocycles) reported before. By comparison of the X-ray structures obtained for the racemic mixture as well as one enantiomer important information could be extracted for the formation of p-dimers of perylene bisimides. The dependence of the interconversion barrier on the bulkiness of the bay-substituents was investigated for four halogen-substituted perylene bisimides. The dynamic properties were investigated by temperature-dependent NMR spectroscopy and kinectic measurements using CD spectroscopy. By applying the concept of the “apparent overlap” a convincing linear relationship between the size of the substituents and the free enthalpy of activation could be derived. Furthermore, the resolution of the atropo-diastereomers or enantiomers of the tetrachloro and tetrabromo-substituted derivates was accomplished, whereupon especially the 1,6,7,12-tetrabromosubstituted perylene bisimide provided at room temperature stable enantiomers. Additionally, the derived structure-property relationship allows the design of conformationally stable perylene bisimide enantiomers by proper choice of the bay substituents. In order to utilize the reversibility of self-assembly for the quantitative formation of macrocyclic perylene bisimides, a tetrazinc porphyrin-functionalized perylene bisimide was synthesized. The self-assembly of the zinc porphyrin perylene bisimide bichromophoric building block and diazabicyclo-[2.2.2]-undecane into the desired 1:2 sandwich complex was investigated by UV/Vis and 1H NMR spectroscopy and the macrocyclic structure was unequivocally proven by diffusion-ordered NMR spectroscopy (DOSY NMR). Furthermore, the controlled deposition of these well-defined macrocycles on highly ordered pyrolitic graphite (HOPG) was demonstrated by atomic force microscopy (AFM) investigations. The alignment of a linear amino functionalised p-conjugated polymers upon addition of the bichromphoric tetrazinc porphyrin-perylene bisimide was investigated by UV/Vis spectroscopy and AFM measurement. The surface analysis by AFM investigations revealed that the bichromophoric system composed of perylene bisimide and zinc porphyrin is able to cross-link the linear p-conjugated polymer over a wide range of the graphite surface which provided a defined arrangement of three different functional p-systems.
In this thesis the syntheses and detailed investigations on two foldable PBI systems were presented. The reversible, solvent-dependet folding/unfolding-behavior was used to study the ground and excited states properties of folda-dimer and folda-trimer by means of different spectroscopic methods as well as theoretical studies. The switching between charge transfer or excimer formation pathways of photoexcited molecules influenced by the spatial arrangement of chromophores within defined dye systems illustrates the impact of conformational preferences on functional properties.
The thesis enhances the strategy of non-destructive fluorescence read-out in rylene bisimide-diarylethene containing photochromic systems. The fluorescence of the emitter unit is quenched by a photoinduced electron transfer only to one of the isomeric forms of the photochrome. The driving force of the fuorescence-quenching electron transfer was calculated by the help of the Rehm-Weller equation. The novel photochromic systems satisfy the necessary requirements for non-destructive read-out in write/read/erase fluorescent memory devices.
The subject of this thesis is the synthesis and characterization of PBI-based fluorescent metallosupramolecular polymers and cyclic arrays. Terpyridine receptor functionalized PBIs of predesigned geometry have been used as building blocks to construct desired macromolecular structures through metal-ion-directed self-assembly. These metallosupramolecular architectures have been investigated by NMR, UV/Vis and fluorescence spectroscopy, mass spectrometry, and atomic force microscopy.
The main objective of this thesis was the design and synthesis of perylene bisimide dyes with sufficient water-solubility for the construction of self-assembled architectures in aqueous solutions. Beside these tasks another goal of this project was the control over the self-assembly process in terms of aggregate size and helicity, respectively. Within this thesis an appropriate synthesis for spermine-functionalized perylene bisimide dyes was developed and conducted successfully. The characterization of these building blocks and their course of self-assembly were investigated by NMR, UV/Vis and fluorescence spectroscopy as well as by atomic force and transmission electron microscopy. For the better understanding of the experimental results theoretical calculations were performed.
Complexation properties of 2,2':6',2''-terpyridine (tpy) have been studied with a series of first row transition metal ions by UV-vis, 1H NMR and isothermal titration calorimetry and ƒ´H values for the tpy complexation processes have been determined. These studies reveal that Zn2+ is the best suited metal ion for the reversible coordination of the terpyridine ligand. Thus, supramolecular coordination polymerization of perylene bisimide fluorophores containing terpyridine functionalities have been investigated by using Zn2+ as metal ion. The formation of the dimeric complexes in the case of monotopic model comounds and coordination polymerization of ditopic functional building blocks have been confirmed by 1H NMR studies. The optical properties of dimeric and polymeric complexes have been investigated by UV-vis and fluorescence spectroscopy. The Zn2+ coordination to the terpyridine unit does not effect the advantageous fluorescence properties of perylene bisimide moieties. The reversibility of the formation of coordination polymers has been established by 1H NMR and additionally by DOSY NMR and fluorescence anisotropy measurements. Coordination polymer strands can be visualized by atomic force microscopy (AFM), which also reveals the formation of an ordered monolayer film at higher concentration. The average polymer length has been determined by AFM to 15 repeat units, which correlates well with the value estimated by 1H NMR to >10 repeat units.