Refine
Has Fulltext
- yes (25)
Is part of the Bibliography
- yes (25)
Year of publication
Document Type
- Doctoral Thesis (25) (remove)
Keywords
- Fernerkundung (25) (remove)
Institute
Sonstige beteiligte Institutionen
- Deutsches Zentrum für Luft & Raumfahrt (DLR) (1)
- Deutsches Zentrum für Luft- und Raumfahrt (DLR) (1)
- Deutsches Zentrum für Luft- und Raumfahrt (DLR), Deutsches Fernerkundungsdatenzengrum (DFD) (1)
- Deutsches Zentrum für Luft- und Raumfahrt e.V. (1)
- Lehrstuhl für Fernerkundung der Uni Würzburg, in Kooperation mit dem Deutschen Fernerkundungsdatenzentrum (DFD) des Deutschen Zentrums für Luft- und Raumfahrt (DLR) (1)
Agriculture is mankind’s primary source of food production and plays the key role for cereal supply to humanity. One of the future challenges will be to feed a constantly growing population, which is expected to reach more than nine billion by 2050. The potential to expand cropland is limited, and enhancing agricultural production efficiency is one important means to meet the future food demand. Hence, there is an increasing demand for dependable, accurate and comprehensive agricultural intelligence on crop production. The value of satellite earth observation (EO) data for agricultural monitoring is well recognized. One fundamental requirement for agricultural monitoring is routinely updated information on crop acreage and the spatial distribution of crops. With the technical advancement of satellite sensor systems, imagery with higher temporal and finer spatial resolution became available. The classification of such multi-temporal data sets is an effective and accurate means to produce crop maps, but methods must be developed that can handle such large and complex data sets. Furthermore, to properly use satellite EO for agricultural production monitoring a high temporal revisit frequency over vast geographic areas is often necessary. However, this often limits the spatial resolution that can be used. The challenge of discriminating pixels that correspond to a particular crop type, a prerequisite for crop specific agricultural monitoring, remains daunting when the signal encoded in pixels stems from several land uses (mixed pixels), e.g. over heterogeneous landscapes where individual fields are often smaller than individual pixels.
The main purposes of the presented study were (i) to assess the influence of input dimensionality and feature selection on classification accuracy and uncertainty in object-based crop classification, (ii) to evaluate if combining classifier algorithms can improve the quality of crop maps (e.g. classification accuracy), (iii) to assess the spatial resolution requirements for crop identification via image classification.
Reporting on the map quality is traditionally done with measures that stem from the confusion matrix based on the hard classification result. Yet, these measures do not consider the spatial variation of errors in maps. Measures of classification uncertainty can be used for this purpose, but they have attained only little attention in remote sensing studies. Classifier algorithms like the support vector machine (SVM) can estimate class memberships (the so called soft output) for each classified pixel or object. Based on these estimations, measures of classification uncertainty can be calculated, but it has not been analysed in detail, yet, if these are reliable in predicting the spatial distribution of errors in maps. In this study, SVM was applied for the classification of agricultural crops in irrigated landscapes in Middle Asia at the object-level. Five different categories of features were calculated from RapidEye time series data as classification input. The reliability of classification uncertainty measures like entropy, derived from the soft output of SVM, with regard to predicting the spatial distribution of error was evaluated. Further, the impact of the type and dimensionality of the input data on classification uncertainty was analysed. The results revealed that SMVs applied to the five feature categories separately performed different in classifying different types of crops. Incorporating all five categories of features by concatenating them into one stacked vector did not lead to an increase in accuracy, and partly reduced the model performance most obviously because of the Hughes phenomena. Yet, applying the random forest (RF) algorithm to select a subset of features led to an increase of classification accuracy of the SVM. The feature group with red edge-based indices was the most important for general crop classification, and the red edge NDVI had an outstanding importance for classifying crops. Two measures of uncertainty were calculated based on the soft output from SVM: maximum a-posteriori probability and alpha quadratic entropy. Irrespective of the measure used, the results indicate a decline in classification uncertainty when a dimensionality reduction was performed. The two uncertainty measures were found to be reliable indicators to predict errors in maps. Correctly classified test cases were associated with low uncertainty, whilst incorrectly test cases tended to be associated with higher uncertainty.
The issue of combining the results of different classifier algorithms in order to increase classification accuracy was addressed. First, the SVM was compared with two other non-parametric classifier algorithms: multilayer perceptron neural network (MLP) and RF. Despite their comparatively high classification performance, each of the tested classifier algorithms tended to make errors in different parts of the input space, e.g. performed different in classifying crops. Hence, a combination of the complementary outputs was envisaged. To this end, a classifier combination scheme was proposed, which is based on existing algebraic operators. It combines the outputs of different classifier algorithms at the per-case (e.g. pixel or object) basis. The per-case class membership estimations of each classifier algorithm were compared, and the reliability of each classifier algorithm with respect to classifying a specific crop class was assessed based on the confusion matrix. In doing so, less reliable classifier algorithms were excluded at the per-class basis before the final combination. Emphasis was put on evaluating the selected classification algorithms under limiting conditions by applying them to small input datasets and to reduced training sample sets, respectively. Further, the applicability to datasets from another year was demonstrated to assess temporal transferability. Although the single classifier algorithms performed well in all test sites, the classifier combination scheme provided consistently higher classification accuracies over all test sites and in different years, respectively. This makes this approach distinct from the single classifier algorithms, which performed different and showed a higher variability in class-wise accuracies. Further, the proposed classifier combination scheme performed better when using small training set sizes or when applied to small input datasets, respectively.
A framework was proposed to quantitatively define pixel size requirements for crop identification via image classification. That framework is based on simulating how agricultural landscapes, and more specifically the fields covered by one crop of interest, are seen by instruments with increasingly coarser resolving power. The concept of crop specific pixel purity, defined as the degree of homogeneity of the signal encoded in a pixel with respect to the target crop type, is used to analyse how mixed the pixels can be (as they become coarser) without undermining their capacity to describe the desired surface properties (e.g. to distinguish crop classes via supervised or unsupervised image classification). This tool can be modulated using different parameterizations to explore trade-offs between pixel size and pixel purity when addressing the question of crop identification. Inputs to the experiments were eight multi-temporal images from the RapidEye sensor. Simulated pixel sizes ranged from 13 m to 747.5 m, in increments of 6.5 m. Constraining parameters for crop identification were defined by setting thresholds for classification accuracy and uncertainty. Results over irrigated agricultural landscapes in Middle Asia demonstrate that the task of finding the optimum pixel size did not have a “one-size-fits-all” solution. The resulting values for pixel size and purity that were suitable for crop identification proved to be specific to a given landscape, and for each crop they differed across different landscapes. Over the same time series, different crops were not identifiable simultaneously in the season and these requirements further changed over the years, reflecting the different agro-ecological conditions the investigated crops were growing in. Results further indicate that map quality (e.g. classification accuracy) was not homogeneously distributed in a landscape, but that it depended on the spatial structures and the pixel size, respectively. The proposed framework is generic and can be applied to any agricultural landscape, thereby potentially serving to guide recommendations for designing dedicated EO missions that can satisfy the requirements in terms of pixel size to identify and discriminate crop types.
Regarding the operationalization of EO-based techniques for agricultural monitoring and its application to a broader range of agricultural landscapes, it can be noted that, despite the high performance of existing methods (e.g. classifier algorithms), transferability and stability of such methods remain one important research issue. This means that methods developed and tested in one place might not necessarily be portable to another place or over several years, respectively. Specifically in Middle Asia, which was selected as study region in this thesis, classifier combination makes sense due to its easy implementation and because it enhanced classification accuracy for classes with insufficient training samples. This observation makes it interesting for operational contexts and when field reference data availability is limited. Similar to the transferability of methods, the application of only one certain kind of EO data (e.g. with one specific pixel size) over different landscapes needs to be revisited and the synergistic use of multi-scale data, e.g. combining remote sensing imagery of both fine and coarse spatial resolution, should be fostered. The necessity to predict and control the effects of spatial and temporal scale on crop classification is recognized here as a major goal to achieve in EO-based agricultural monitoring.
Irrigated agriculture in the Khorezm region in the arid inner Aral Sea Basin faces enormous challenges due to a legacy of cotton monoculture and non-sustainable water use. Regional crop growth monitoring and yield estimation continuously gain in importance, especially with regard to climate change and food security issues. Remote sensing is the ideal tool for regional-scale analysis, especially in regions where ground-truth data collection is difficult and data availability is scarce. New satellite systems promise higher spatial and temporal resolutions. So-called light use efficiency (LUE) models are based on the fraction of photosynthetic active radiation absorbed by vegetation (FPAR), a biophysical parameter that can be derived from satellite measurements. The general objective of this thesis was to use satellite data, in conjunction with an adapted LUE model, for inferring crop yield of cotton and rice at field (6.5 m) and regional (250 m) scale for multiple years (2003-2009), in order to assess crop yield variations in the study area. Intensive field measurements of FPAR were conducted in the Khorezm region during the growing season 2009. RapidEye imagery was acquired approximately bi-weekly during this time. The normalized difference vegetation index (NDVI) was calculated for all images. Linear regression between image-based NDVI and field-based FPAR was conducted. The analyses resulted in high correlations, and the resulting regression equations were used to generate time series of FPAR at the RapidEye level. RapidEye-based FPAR was subsequently aggregated to the MODIS scale and used to validate the existing MODIS FPAR product. This step was carried out to evaluate the applicability of MODIS FPAR for regional vegetation monitoring. The validation revealed that the MODIS product generally overestimates RapidEye FPAR by about 6 to 15 %. Mixture of crop types was found to be a problem at the 1 km scale, but less severe at the 250 m scale. Consequently, high resolution FPAR was used to calibrate 8-day, 250 m MODIS NDVI data, this time by linear regression of RapidEye-based FPAR against MODIS-based NDVI. The established FPAR datasets, for both RapidEye and MODIS, were subsequently assimilated into a LUE model as the driving variable. This model operated at both satellite scales, and both required an estimation of further parameters like the photosynthetic active radiation (PAR) or the actual light use efficiency (LUEact). The latter is influenced by crop stress factors like temperature or water stress, which were taken account of in the model. Water stress was especially important, and calculated via the ratio of the actual (ETact) to the potential, crop-specific evapotranspiration (ETc). Results showed that water stress typically occurred between the beginning of May and mid-September and beginning of May and end of July for cotton and rice crops, respectively. The mean water stress showed only minor differences between years. Exceptions occurred in 2008 and 2009, where the mean water stress was higher and lower, respectively. In 2008, this was likely caused by generally reduced water availability in the whole region. Model estimations were evaluated using field-based harvest information (RapidEye) and statistical information at district level (MODIS). The results showed that the model at both the RapidEye and the MODIS scale can estimate regional crop yield with acceptable accuracy. The RMSE for the RapidEye scale amounted to 29.1 % for cotton and 30.4 % for rice, respectively. At the MODIS scale, depending on the year and evaluated at Oblast level, the RMSE ranged from 10.5 % to 23.8 % for cotton and from -0.4 % to -19.4 % for rice. Altogether, the RapidEye scale model slightly underestimated cotton (bias = 0.22) and rice yield (bias = 0.11). The MODIS-scale model, on the other hand, also underestimated official rice yield (bias from 0.01 to 0.87), but overestimated official cotton yield (bias from -0.28 to -0.6). Evaluation of the MODIS scale revealed that predictions were very accurate for some districts, but less for others. The produced crop yield maps indicated that crop yield generally decreases with distance to the river. The lowest yields can be found in the southern districts, close to the desert. From a temporal point of view, there were areas characterized by low crop yields over the span of the seven years investigated. The study at hand showed that light use efficiency-based modeling, based on remote sensing data, is a viable way for regional crop yield prediction. The found accuracies were good within the boundaries of related research. From a methodological viewpoint, the work carried out made several improvements to the existing LUE models reported in the literature, e.g. the calibration of FPAR for the study region using in situ and high resolution RapidEye imagery and the incorporation of crop-specific water stress in the calculation.
Rapid population growth in West Africa has led to expansion in croplands due to the need to grow more food to meet the rising food demand of the burgeoning population. These expansions negatively impact the sub-region's ecosystem, with implications for water and soil quality, biodiversity and climate. In order to appropriately monitor the changes in croplands and assess its impact on the ecosystem and other environmental processes, accurate and up-to-date information on agricultural land use is required. But agricultural land use mapping (i.e. mapping the spatial distribution of crops and croplands) in West Africa has been challenging due to the unavailability of adequate satellite images (as a result of excessive cloud cover), small agricultural fields and a heterogeneous landscape. This study, therefore, investigated the possibilities of improving agricultural land use mapping by utilizing optical satellite images with higher spatial and temporal resolution as well as images from Synthetic Aperture Radar (SAR) systems which are near-independent of weather conditions. The study was conducted at both watershed and regional scales.
At watershed scale, classification of different crop types in three watersheds in Ghana, Burkina Faso and Benin was conducted using multi-temporal: (1) only optical images (RapidEye) and (2) optical plus dual polarimetric (VV/VH) SAR images (TerraSAR-X). In addition, inter-annual or short term (2-3 years) changes in cropland area in the past ten years were investigated using historical Landsat images. Results obtained indicate that the use of only optical images to map different crop types in West Africa can achieve moderate classification accuracies (57% to 71%). Overlaps between the cropping calendars of most crops types and certain inter-croppings pose a challenge to optical images in achieving an adequate separation between those crop classes. Integration of SAR images, however, can improve classification accuracies by between 8 and 15%, depending on the number of available images and their acquisition dates. The sensitivity of SAR systems to different crop canopy architectures and land surface characteristics improved the separation between certain crop types. The VV polarization of TerraSAR-X was found to better discrimination between crop types than the VH. Images acquired between August and October were found to be very useful for crop mapping in the sub-region due to structural differences in some crop types during this period.
At the regional scale, inter-annual or short term changes in cropland area in the Sudanian Savanna agro-ecological zone in West Africa were assessed by upscaling historical cropland information derived at the watershed scale (using Landsat imagery) unto a coarse spatial resolution, but geographically large, satellite imagery (MODIS) using regression based modeling. The possibility of using such regional scale cropland information to improve government-derived agricultural statistics was investigated by comparing extracted cropland area from the fractional cover maps with district-level agricultural statistics from Ghana The accuracy of the fractional cover maps (MAE between 14.2% and 19.1%) indicate that the heterogeneous agricultural landscape of West Africa can be suitably represented at the regional or continental scales by estimating fractional cropland cover on low resolution Analysis of the results revealed that cropland area in the Sudanian Savanna zone has experienced inter-annual or short term fluctuations in the past ten years due to a variety of factors including climate factors (e.g. floods and droughts), declining soil fertility, population increases and agricultural policies such as fertilizer subsidies. Comparison of extracted cropland area from the fractional cover maps with government's agricultural statistics (MoFA) for seventeen districts (second administrative units) in Ghana revealed high inconsistencies in the government statistics, and highlighted the potential of satellite derived cropland information at regional scales to improve national/sub-national agricultural statistics in West Africa.
The results obtained in this study is promising for West Africa, considering the recent launch of optical (Landsat 8) and SAR sensors (Sentinel-1) that will provide free data for crop mapping in the sub-region. This will improve chances of obtaining adequate satellite images acquired during the cropping season for agricultural land use mapping and bolster opportunities of operationalizing agricultural land use mapping in West Africa. This can benefit a wide range of biophysical and economic models and improve decision making based on their results.
Current changes of biodiversity result almost exclusively from human activities. This anthropogenic conversion of natural ecosystems during the last decades has led to the so-called ‘biodiversity crisis’, which comprises the loss of species as well as changes in the global distribution patterns of organisms. Species richness is unevenly distributed worldwide. Altogether, 17 so-called ‘megadiverse’ nations cover less than 10% of the earth’s land surface but support nearly 70% of global species richness. Mexico, the study area of this thesis, is one of those countries. However, due to Mexico’s large extent and geographical complexity, it is impossible to conduct reliable and spatially explicit assessments of species distribution ranges based on these collection data and field work alone. In the last two decades, Species distribution models (SDMs) have been established as important tools for extrapolating such in situ observations. SDMs analyze empirical correlations between geo-referenced species occurrence data and environmental variables to obtain spatially explicit surfaces indicating the probability of species occurrence. Remote sensing can provide such variables which describe biophysical land surface characteristics with high effective spatial resolutions. Especially during the last three to five years, the number of studies making use of remote sensing data for modeling species distributions has therefore multiplied. Due to the novelty of this field of research, the published literature consists mostly of selective case studies. A systematic framework for modeling species distributions by means of remote sensing is still missing. This research gap was taken up by this thesis and specific studies were designed which addressed the combination of climate and remote sensing data in SDMs, the suitability of continuous remote sensing variables in comparison with categorical land cover classification data, the criteria for selecting appropriate remote sensing data depending on species characteristics, and the effects of inter-annual variability in remotely sensed time series on the performance of species distribution models. The corresponding novel analyses were conducted with the Maximum Entropy algorithm developed by Phillips et al. (2004). In this thesis, a more comprehensive set of remote sensing predictors than in the existing literature was utilized for species distribution modeling. The products were selected based on their ecological relevance for characterizing species distributions. Two 1 km Terra-MODIS Land 16-day composite standard products including the Enhanced Vegetation Index (EVI), Reflectance Data, and Land Surface Temperature (LST) were assembled into enhanced time series for the time period of 2001 to 2009. These high-dimensional time series data were then transformed into 18 phenological and 35 statistical metrics that were selected based on an extensive literature review. Spatial distributions of twelve tree species were modeled in a hierarchical framework which integrated climate (WorldClim) and MODIS remote sensing data. The species are representative of the major Mexican forest types and cover a variety of ecological traits, such as range size and biotope specificity. Trees were selected because they have a high probability of detection in the field and since mapping vegetation has a long tradition in remote sensing. The result of this thesis showed that the integration of remote sensing data into species distribution models has a significant potential for improving and both spatial detail and accuracy of the model predictions.
Die Veränderung der terrestrischen Ökosysteme, ist ein grundlegendes Element des Globalen Wandels. In diesem Kontext unterliegt auch eines der größten Biome der Erde, die tropische und subtropische Savanne, immer stärkeren Veränderungen. Dieses Biom in sozioökonomischer und ökologischer Hinsicht von besonderer Bedeutung. Für einen rasch wachsenden Teil der Weltbevölkerung bildet es die Grundlage für das Betreiben von Weidewirtschaft, Ackerbau und Tourismus. In nationalen und internationalen Forschungsprogrammen zum Globalen Wandel hat die Analyse von Landnutzungs- und Landbedeckungsänderungen in den vergangenen Jahrzehnten zunehmend an Bedeutung gewonnen. Die Landbedeckungsdynamik von Savannenökosystemen ist jedoch noch nicht hinreichend verstanden, so dass diese Ökosysteme in globalen Studien nur ansatzweise berücksichtigt werden können. Besondere Herausforderungen bei der Erfassung der Landbedeckung und ihrer Dynamik liegen im Falle der Savannen in der heterogenen räumlichen Verteilung der Wuchsformen, in den graduellen Übergängen zwischen Landbedeckungsklassen und in der hohen inner- und interannuellen Variabilität der Vegetationsdecke. Vor diesem Hintergrund beschäftigt sich diese Dissertation mit der fernerkundungsbasierten Erfassung und Interpretation der Vegetationsstruktur und der Vegetationsdynamik von Savannen am Beispiel ausgewählter afrikanischer Untersuchungsregionen. Die Vegetationsstruktur wird in dieser Dissertation in Form von Bedeckungsgraden holziger Vegetation, krautiger Vegetation und vegetationsloser Fläche erfasst. Es kommt ein mehrskaliges Verfahren zum Einsatz, in dem höchstaufgelöste IKONOS- und QuickBird-Daten, Landsat-Daten und annuelle MODIS-Zeitreihen ausgewertet werden. Der Ansatz basiert auf der Methodik der Ensemble-Regeressionbäume und stellt eine Erweiterung und Optimierung der Herangehensweise des MODIS-Standardproduktes Vegetation Continuous Fields (VCF) nach Hansen et al. (2002) dar. Beim Vergleich mit unabhängigen Validierungsdaten der nächst höheren Auflösungsebene zeigt sich das Potenzial der vorgestellten Methodik. Die räumliche Übertragbarkeit der Regressionsbäume wird am Beispiel von zwei Vegetationstypen innerhalb der Zentralnamibischen Savanne dargestellt. In diesem Zusammenhang zeigt sich der hohe Stellenwert einer optimalen Auswahl an Trainingsdaten mit einer repräsentativen Abdeckung der Wertespanne aller existierenden Bedeckungsgrade. Die erarbeiteten Resultate unterstreichen, die optimale Eignung der Subpixel-Bedeckungsgrade, gerade zur Beschreibung von Savannenlandschaften. In der Kombination von herkömmlichen, diskreten Landbedeckungs- oder Vegetationskarten mit Informationen zu Bedeckungsgraden wird ein besonderer Mehrwert für weiterführende Analysen gesehen. Die Dynamik der Savannenvegetation wird in dieser Arbeit sowohl auf biannueller als auch auf mehrjähriger Skala charakterisiert. Bei der biannuellen Analyse werden die Veränderungen der holzigen Vegetationsbedeckung zwischen den Jahren 2003/04 und 2006/07 erfasst. Hierfür findet eine zeitliche Übertragung des zuvor vorgestellten Verfahrens zur Ableitung von Bedeckungsanteilen statt. Im Rahmen der biannuellen Untersuchungen können Veränderungsflächen identifiziert werden, ohne Einschränkung auf Übergänge zwischen fest definierten Klassengrenzen. In Ergänzung der biannuellen Analysen werden aus MODIS-EVI- und Niederschlagszeitreihen Maßzahlen abgeleitet, die den Zusammenhang zwischen Niederschlag und Vegetationsentwicklung, die Variabilität und die Trends der Vegetation über einen Zeitraum von acht Jahren beschreiben. Hierbei kommen beispielsweise Korrelationsanalysen zwischen Vegetationsindex- und Niederschlagszeitreihen zum Einsatz. Zudem werden Trendanalysen der Vegetationsindex-Zeitreihen durchgeführt. Die Trends werden einerseits allein aus den Zeitreihen der Vegetationsindizes ermittelt, andererseits wird bei der Berechnung von Restrends (Residual Trends) der Einfluss des Niederschlags berücksichtigt. Neben den Korrelations- und Trendanalysen werden unterschiedliche Variabilitätsmaße der Vegetationsindex-Zeitreihen genutzt, um die mehrjährige Vegetationsdynamik zu beschreiben. Durch die Kombination von Fernerkundungsdaten unterschiedlicher räumlicher und zeitlicher Auflösungen wird in dieser Dissertation die heterogene Vegetationsstruktur und die komplexe Vegetationsdynamik ausgewählter afrikanischer Savannenökosysteme beschreiben.
Der Klimawandel und insbesondere die globale Erwärmung gehören aktuell zu den größten Herausforderungen an Politik und Wissenschaft. Steigende CO2-Emissionen sind hierbei maßgeblich für die Klimaerwärmung verantwortlich. Ein regulierender Faktor beim CO2-Austausch mit der Atmosphäre ist die Vegetation, welche als CO2-Senke aber auch als CO2-Quelle fungieren kann. Diese Funktionen können durch Analysen der Landbedeckungsänderung in Kombination mit Modellierungen der Kohlenstoffbilanz quantifiziert werden, was insbesondere von aktuellen und zukünftigen politischen Instrumenten wie CDM (Clean Development Mechanism) oder REDD (Reducing Emissions from Deforestation and Degradation) gefordert wird. Vor allem in Regionen mit starker Landbedeckungsänderung und hoher Bevölkerungsdichte sowie bei geringem Wissen über die Produktivität und CO2-Speicherpotentiale der Vegetation, bedarf es einer Erforschung und Quantifizierung der terrestrischen Kohlenstoffspeicher. Eine Region, für die dies in besonderem Maße zutrifft, ist Westafrika. Jüngste Studien haben gezeigt, dass sich einerseits die Folgen des Klimawandels und Umweltveränderungen sehr stark in Westafrika auswirken werden und andererseits Bevölkerungswachstum eine starke Änderung der Landbedeckung für die Nutzung als agrarische Fläche bewirkt hat. Folglich sind in dieser Region die terrestrischen Kohlenstoffspeicher durch Ausdehnung der Landwirtschaft und Waldrodung besonders gefährdet. Große Flächen agieren anstelle ihrer ursprünglichen Funktion als CO2-Senke bereits als CO2-Quelle. [...]
Mapping Bushfire Distribution and Burn Severity in West Africa Using Remote Sensing Observations
(2010)
Fire has long been considered to be the main ecological factor explaining the origin and maintenance of West African savannas. It has a very high occurrence in these savannas due to high human pressure caused by strong demographic growth and, concomitantly, is used to transform natural savannas into farmland and is also used as a provider of energy. This study was carried out with the support of the BIOTA project funded by the German ministry for Research and Education. The objective of this study is to establish the spatial and temporal distribution of bushfires during a long observation period from 2000 to 2009 as well as to assess fire impact on vegetation through mapping of the burn severity; based on remote sensing and field data collections. Remote sensing was used for this study because of the advantages that it offers in collecting data for long time periods and on different scales. In this case, the Moderate Resolution Imaging Spectroradiometer (MODIS) satellite instrument at 1km resolution is used to assess active fires, and understand the seasonality of fire, its occurrence and its frequency within the vegetation types on a regional scale. Landsat ETM+ imagery at 30 m and field data collections were used to define the characteristics of burn severity related to the biomass loss on a local scale. At a regional scale, the occurrence of fires and rainfall per month correlated very well (R2 = 0.951, r = -0.878, P < 0.01), which shows that the lower the amount of rainfall, the higher the fire occurrence and vice versa. In the dry season, four fire seasons were determined on a regional scale, namely very early fires, which announce the beginning of the fires, early and late fires making up the peak of fire in December/January and very late fires showing the end of the fire season and the beginning of the rainy season. Considerable fire activity was shown to take place in the vegetation zones between the Forest and the Sahel areas. Within these zones, parts of the Sudano-Guinean and the Guinean zones showed a high pixel frequency, i.e. fires occurred in the same place in many years. This high pixel frequency was also found in most protected areas in these zones. As to the kinds of land cover affected by fire, the highest fire occurrence is observed within the Deciduous woodlands and Deciduous shrublands. Concerning the burn severity, which was observed at a local scale, field data correlated closely with the ΔNBR derived from Landsat scenes of Pendjari National Park (R2 = 0.76). The correlation coefficient according to Pearson is r = 0.84 and according to Spearman-Rho, the correlation coefficient is r = 0.86. Very low and low burn severity (with ΔNBR value from 0 to 0.40) affected the vegetation weakly (0-35 percent of biomass loss) whereas moderate and high burn severity greatly affected the vegetation, leading to up to 100 percent of biomass loss, with the ΔNBR value ranging from 0.41 to 0.99. It can be seen from these results that remotely sensed images offer a tool to determine the fire distribution over large regions in savannas and that the Normalised Burn Ratio index can be applied to West Africa savannas. The outcomes of this thesis will hopefully contribute to understanding and, eventually, improving fire regimes in West Africa and their response to climate change and changes in vegetation diversity.
The urban micro climate has been increasingly recognised as an important aspect for urban planning. Therefore, urban planners need reliable information on the micro climatic characteristics of the urban environment. A suitable spatial scale and large spatial coverage are important requirements for such information. This thesis presents a conceptual framework for the use of airborne hyperspectral data to support urban micro climate characterisation, taking into account the information needs of urban planning. The potential of hyperspectral remote sensing in characterising the micro climate is demonstrated and evaluated by applying HyMap airborne hyperspectral and height data to a case study of the German city of Munich. The developed conceptual framework consists of three parts. The first is concerned with the capabilities of airborne hyperspectral remote sensing to map physical urban characteristics. The high spatial resolution of the sensor allows to separate the relatively small urban objects. The high spectral resolution enables the identification of the large range of surface materials that are used in an urban area at up to sub-pixel level. The surface materials are representative for the urban objects of which the urban landscape is composed. These spatial urban characteristics strongly influence the urban micro climate. The second part of the conceptual framework provides an approach to use the hyperspectral surface information for the characterisation of the urban micro climate. This can be achieved by integrating the remote sensing material map into a micro climate model. Also spatial indicators were found to provide useful information on the micro climate for urban planners. They are commonly used in urban planning to describe building blocks and are related to several micro climatic parameters such as temperature and humidity. The third part of the conceptual framework addresses the combination and presentation of the derived indicators and simulation results under consideration of the planning requirements. Building blocks and urban structural types were found to be an adequate means to group and present the derived information for micro climate related questions to urban planners. The conceptual framework was successfully applied to a case study in Munich. Airborne hyperspectral HyMap data has been used to derive a material map at sub-pixel level by multiple endmember linear spectral unmixing. This technique was developed by the German Research Centre for Geosciences (GFZ) for applications in Dresden and Potsdam. A priori information on building locations was used to support the separation between spectrally similar materials used both on building roofs and non-built surfaces. In addition, surface albedo and leaf area index are derived from the HyMap data. The sub-pixel material map supported by object height data is then used to derive spatial indicators, such as imperviousness or building density. To provide a more detailed micro climate characterisation at building block level, the surface materials, albedo, leaf area index (LAI) and object height are used as input for simulations with the micro climate model ENVI-met. Concluding, this thesis demonstrated the potential of hyperspectral remote sensing to support urban micro climate characterisation. A detailed mapping of surface materials at sub-pixel level could be performed. This provides valuable, detailed information on a large range of spatial characteristics relevant to the assessment of the urban micro climate. The developed conceptual framework has been proven to be applicable to the case study, providing a means to characterise the urban micro climate. The remote sensing products and subsequent micro climatic information are presented at a suitable spatial scale and in understandable maps and graphics. The use of well-known spatial indicators and the framework of urban structural types can simplify the communication with urban planners on the findings on the micro climate. Further research is needed primarily on the sensitivity of the micro climate model towards the remote sensing based input parameters and on the general relation between climate parameters and spatial indicators by comparison with other cities.
Glacier outlines during the ‘Little Ice Age’ maximum in Jotunheimen were mapped by using remote sensing techniques (vertical aerial photos and satellite imagery), glacier outlines from the 1980s and 2003, a digital terrain model (DTM), geomorphological maps of individual glaciers, and field-GPS measurements. The related inventory data (surface area, minimum and maximum altitude) and several other variables (e.g. slope, range) were calculated automatically by using a geographical information system. The length of the glacier flowline was mapped manually based on the glacier outlines at the maximum of the ‘Little Ice Age’ and the DTM. The glacier data during the maximum of the ‘Little Ice Age’ were compared with the Norwegian glacier inventory of 2003. Based on the glacier inventories during the maximum of the ‘Little Ice Age’, the 1980s and 2003, a simple parameterization after HAEBERLI & HOELZLE (1995) was performed to estimate unmeasured glacier variables, as e.g. surface velocity or mean net mass balance. Input data were composed of surface glacier area, minimum and maximum elevation, and glacier length. The results of the parameterization were compared with the results of previous parameterizations in the European Alps and the Southern Alps of New Zealand (HAEBERLI & HOELZLE 1995; HOELZLE et al. 2007). A relationship between these results of the inventories and of the parameterization and climate and climate changes was made.
In den letzten Jahrzehnten ist eine verstärkte Veränderung der Landoberfläche beobachtet worden. Diese Prozesse sind direkten und indirekten anthropogenen Einflüssen zuzuschreiben, wie Deforestation oder Klimawandel. Mit dieser Entwicklung geht der Verlust und die Fragmentation von naturnahen Flächen einher. Für das Fortbestehen von Populationen verschiedenster Organismen in einer derartig geformten Landschaft ist entscheidend, inwieweit die Migration zwischen bestehenden Fragmenten gewährleistet ist. Diese wird von der Eignung der umgebenden Landschaft beeinflusst. Im Kontext einer klimatischen Veränderung und verstärkter anthropogener Landnutzung ist die Analyse der räumlichen Anordnung von Habitatfragmenten und der Qualität der umgebenden Landschaft besonders für die globale Aufrechterhaltung der Biodiversität wichtig. Großräumige Muster der Landschaftsveränderung können mit Hilfe von Satellitendaten analysiert werden, da es nur diese ermöglichen die Landbedeckung flächendeckend, reproduzierbar und auf einer adäquaten räumlichen Auflösung zu kartieren. Besonders zeitlich hochaufgelöste Daten liefern wertvolle Informationen bezüglich der Dynamik der Landbedeckung. Diese Arbeit beschäftigt sich mit der Analyse der Fragmentation in Westafrika und der potentiellen Bedeutung von singulären Fragmenten und deren potentiellen Auswirkungen auf die Biodiversität. Dafür wurden zeitlich hoch- und räumlich mittelaufgelöste Daten des Aufnahmesystems MODIS verwendet, mit denen für das Untersuchungsgebiet Westafrika die Landbedeckung klassifziert wurde. Für die darauf folgenden Analysen der räumlichen Konfiguration der Fragmente wurde der Fokus auf Regenwaldgebiete gelegt. Die Analyse von räumlichen Mustern der Regenwaldfragmente liefert weiterführende qualitative Informationen der individuellen Teilbereiche. Die räumliche Anordnung wurde sowohl mit etablierten Maßen als auch mittels in dieser Arbeit erstellter robuster und übertragbarer Indizes quantifiziert. Es konnte gezeigt werden, dass die Verwendung von aussagekräftigen Indizes, besonders, wenn sie alle benachbarten Fragmente und die Qualität der umgebenden Matrix berücksichtigen, die räumliche Differenzierung von Fragmenten verbessert. Jedoch ist die Anwendung dieser Maße abhängig von den Ansprüchen einer Art. Daher muss die artspezifische Perzeptionen der Landschaft auf der Basis der Indizes implementiert werden, da die Übertragung der Ergebnisse einzelner Indizes auf andere räumliche Auflösungen und andere Regionen nur begrenzt möglich war. Des Weiteren wurden potentielle Einflussfaktoren auf die räumlichen Muster mittels Neutraler Landschaftsmodelle untersucht. Hierbei ergaben sich je nach Region und Index unterschiedliche Ergebnisse, allerdings konnte der Einfluss anthropogen induzierter Veränderungen auf die Landbedeckung postuliert werden. Die große Bedeutung der räumlichen Attribution von Landbedeckungsklassen konnte in dieser Arbeit aufgezeigt werden. Der alleinige Fokus auf die Kartierung von z. B. Waldfragmenten ohne deren räumliche Anordnung zu berücksichtigen, kann zu falschen Schlüssen bezüglich deren ökologischen, hydrologischen und klimatologischen Bedeutung führen.