Refine
Has Fulltext
- yes (38)
Is part of the Bibliography
- yes (38)
Year of publication
- 2019 (38) (remove)
Document Type
- Journal article (24)
- Doctoral Thesis (12)
- Preprint (2)
Language
- English (38) (remove)
Keywords
- Übergangsmetalloxide (4)
- Monte-Carlo (3)
- Physics (3)
- Raman-Spektroskopie (3)
- Constraints (2)
- Cross-Section (2)
- Decay (2)
- Hadron colliders (2)
- Imaging techniques (2)
- Impact (2)
Institute
- Physikalisches Institut (38) (remove)
Sonstige beteiligte Institutionen
- Center for Nanosystems Chemistry (CNC), Universität Würzburg (1)
- Institute of Physics and Center for Nanotechnology, University of Münster (1)
- Lehrstuhl für BioMolekulare Optik, Ludwig-Maximilians-Universität München (1)
- NanoOptics & Biophotonics Group, Experimental Physics 5, Universität Würzburg (1)
This thesis describes the growth and characterization of both the all-oxide heterostructure
Fe3O4/ZnO and the spin-orbit coupling driven layered perovskite iridates.
As for Fe3O4/ZnO, the 100% spin-polarized Fe3O4 is a promising spin electrode candidate
for spintronic devices. However, the single crystalline ZnO substrates exhibit different polar surface termination which, together with substrate preparation method, can drastically affect the physical properties of Fe3O4/ZnO heterostructures. In this thesis two different methods of substrate preparation were investigated: a previously used in situ method involving sputtering and annealing treatments and a recent ex situ method containing only the annealing procedure. For the latter, the annealing treatment was performed in dry and humid O2 gas flow for the O- and Zn-terminated substrates, respectively, to produce atomically at surfaces as verified by atomic force microscopy(AFM). With these methods, four different ZnO substrates were fabricated and used further for Fe3O4 film growth. Fe3O4 films of 20 nm thickness were successfully grown by reactive molecular beam epitaxy. AFM measurements reveal a higher film surface roughness for the samples with in situ prepared substrates. Moreover, X-ray photoelectron spectroscopy (XPS) measurements indicate significant Zn substitution within the Fe3O4 film for these samples, whereas the samples with ex situ prepared substrates show stoichiometric Fe3O4 films. X-ray diffraction measurements confirm the observations from XPS, revealing additional peaks due to Zn substitution in Fe3O4 films grown on in situ prepared ZnO substrates. Conductivity, as well as magnetometry, measurements show the presence of Zn-doped ferrites in films grown on in situ prepared substrates. Such unintentionally intercalated Zn-doped ferrites dramatically change the electrical and magnetic properties of the films and, therefore, are not preferred in a high-quality heterostructure.
X-ray reflectivity (XRR) measurements show for the film grown on ex situ prepared Zn-terminated substrate a variation of film density close to the interface which is also confirmed by transmission electron microscopy (TEM). Using polarized neutron reflectometry, magnetic depth profiles of the films grown on ex situ prepared substrates clearly indicate Fe3O4 layers with reduced magnetization at the interfaces. This result is consistent with earlier observations made by resonant magnetic X-ray reflectometry (RMXR), but in contrast to the findings from XRR and TEM of this thesis. A detailed TEM study of all four samples shows that the sample with ex situ prepared O-terminated substrate has the sharpest interface, whereas those with ex situ prepared Zn-terminated as well as in situ prepared substrates indicate rougher interfaces. STEM-EELS composition profiles of the samples reveal the Zn substitution in the films with in situ prepared substrates and therefore confirm the presence of Zn-doped ferrites. Moreover, a change of the Fe oxidation state of the first Fe layer at the interface which was observed in previous studies done by RMXR, was not verified for the samples with in situ prepared substrates thus leaving the question of a possible presence of the magnetically dead layer open. Furthermore, density functional theory calculations were performed to determine the termination dependent layer sequences which are ...-Zn-O-(interface)-[Fe(octa)-O-Fe(tetra)-Fe(octa)-Fe(tetra)-O]-[...]-... and ...-O-Zn-(interface)-[O-Fe(octa)-O-Fe(tetra)-Fe(octa)-Fe(tetra)]-[...]-... for the samples with O- and Zn-terminated substrates, respectively. Spin density calculations show that in case of O-termination the topmost substrate layers imitate the spin polarization of film layers close to the interface. Here, the first O layer is affected much stronger than the first Zn layer. Due to the strong decrease of this effect toward deeper substrate layers, the substrate surface is supposed to be sensitive to the contiguous spin polarization of the film. Thus, the topmost O layer of the O-terminated substrate could play the most essential role for effective spin injection into ZnO.
The 5d transition metal oxides Ba2IrO4 (BIO) and Sr2IrO4 (SIO) are associated with the Ruddlesden-Popper iridate series with phase type "214" (RP{214), and due to the strong spin-orbit coupling belong to the class of Mott insulators. Moreover, they show many similarities of the isostructural high Tc-cuprate superconductors, e.g. crystal structure, magnetism and electronic band structure. Therefore, it is of great interest to activate a potential superconducting phase in (RP{214) iridates. However, only a small number of publications on PLD grown (RP{214) iridates in the literature exists. Furthermore, published data of soft X-ray angle resolved photoemission spectroscopy (SX-ARPES) experiments mainly originate from measurements which were performed on single crystals or MBE grown films of SIO and BIO. In this thesis La-doped SIO films (La0:2Sr1:8IrO4, further referred as LSIO) were used to pursue a potential superconducting phase.
A set of characterization methods was used to analyze the quality of the PLD grown BIO, SIO and LSIO films. AFM measurements demonstrate that thick PLD grown(RP{214) iridate films have rougher surfaces, indicating a transition from a 2D layer-bylayer growth (which is demonstrated by RHEED oscillations) to a 3D island-like growth mode. In addition, chemical depth profiling XPS measurements indicate an increase of the O and Ir relative concentrations in the topmost film layers. Constant energy k-space maps and energy distribution curves (EDCs) measured by SX-ARPES show for every grown film only weak energy band dispersions, which are in strong contrast to the results obtained on the MBE grown films and single crystals from the literature. In this thesis,
a subsequent TEM study reveals missing SrO layers within the grown films which occur mainly in the topmost layers, confirming the results and suggestions from XPS and SX-ARPES data: the PLD grown films have defects and, therefore, incoherently scatter photoelectrons. Nevertheless, the LSIO film shows small additional spectral weight between the highsymmetry M points close to the Fermi level which can be attributed to quasiparticle states which, in turn, indicates the formation of a Fermi-arc. However, neither conductivity measurements nor valence band analysis via XPS confirm an activation of a superconducting phase or presence of spectral weight of quasiparticle states at the Fermi level in this LSIO film.
It is possible that these discovered difficulties in growth are responsible for the low number of SX-ARPES publications on PLD grown (RP{214) iridate films. For further investigations of (RP{214) iridate films by SX-ARPES, their PLD growth recipes have to be improved to create high quality single crystalline films without imperfections.
Phylogenetically related groups of species contain lineage-specific genes that exhibit no sequence similarity to any genes outside the lineage. We describe here that the Jekyll gene, required for sexual reproduction, exists in two much diverged allelic variants, Jek1 and Jek3. Despite low similarity, the Jek1 and Jek3 proteins share identical signal peptides, conserved cysteine positions and direct repeats. The Jek1/Jek3 sequences are located at the same chromosomal locus and inherited in a monogenic Mendelian fashion. Jek3 has a similar expression as Jek1 and complements the Jek1 function in Jek1-deficient plants. Jek1 and Jek3 allelic variants were almost equally distributed in a collection of 485 wild and domesticated barley accessions. All domesticated barleys harboring the Jek1 allele belong to single haplotype J1-H1 indicating a genetic bottleneck during domestication. Domesticated barleys harboring the Jek3 allele consisted of three haplotypes. Jekyll-like sequences were found only in species of the closely related tribes Bromeae and Triticeae but not in other Poaceae. Non-invasive magnetic resonance imaging revealed intrinsic grain structure in Triticeae and Bromeae, associated with the Jekyll function. The emergence of Jekyll suggests its role in the separation of the Bromeae and Triticeae lineages within the Poaceae and identifies the Jekyll genes as lineage-specific.
Surface systems attract great scientific attention due to novel and exotic properties. The atomically structured surfaces lead to a reduced dimensionality which alters electronic correlations, vibrational properties, and their impact on each other. The emerging physical phenomena are not observed for related bulk materials. In this thesis, ordered (sub)monolayers of metal atoms (Au and Sn) on semiconductor substrates (Si(111) and Ge(111)) and ultrathin intermetallic films (CePt5 and LaPt5) on metal substrate (Pt(111)) are investigated by polarized in situ surface Raman spectroscopy. The surface Raman spectra exhibit features of specific elementary excitations like surface phonons and electronic excitations, which are suitable to gain fundamental insights into the surface systems.
The Au-induced surface reconstructions (5x2) and (r3xr3) constitute quasi-one- and two-dimensional Au structures on the Si(111) substrate, respectively. The new reconstruction-related Raman peaks are analyzed with respect to their polarization and temperature behavior. The Raman results are combined with firstprinciples calculations to decide between different proposed structural models. The Au-(5x2)/Si(111) reconstruction is best described by the model of Kwon and Kang, while for Au-(r3xr3)/Si(111) the conjugate honeycomb-chained-trimer model is favored. The Sn-induced reconstructions with 1/3 monolayer on Ge(111) and Si(111) are investigated to reveal their extraordinary temperature behavior. Specific surface phonon modes are identified that are predicted within the dynamical fluctuation model. Contrary to Sn/Si(111), the corresponding vibrational mode of Sn/Ge(111) exhibits a nearly harmonic character. The reversible structural phase transition of Sn/Ge(111) from (r3xr3) to (3x3) is observed, while no phase transition is apparent for Sn/Si(111). Moreover, Raman spectra of the closely related systems Sn-(2r3x2r3)/Si(111) and thin films of a-Sn as well as the clean semiconductor surfaces Si(111)-(7x7) and Ge(111)-c(2x8) are evaluated and compared.
The CePt5/Pt(111) system hosts 4f electrons whose energy levels are modified by the crystal field and are relevant for a description of the observed Kondo physics. In contrast, isostructural LaPt5/Pt(111) has no 4f electrons. For CePt5/Pt(111), distinct Raman features due to electronic Raman scattering can be unambiguously related to transitions between the crystal-field states which are depth-dependent. This assignment is supported by comparison to LaPt5/Pt(111) and group theoretical considerations. Furthermore, the vibrational properties of CePt5 and LaPt5 reveal interesting similarities but also striking differences like an unusual temperature shift of a vibration mode of CePt5, which is related to the influence of 4f electrons.
Mutual coupling and injection locking of semiconductor lasers is of great interest in non-linear dynamics and its applications for instance in secure data communication and photonic reservoir computing. Despite its importance, it has hardly been studied in microlasers operating at mu W light levels. In this context, vertically emitting quantum dot micropillar lasers are of high interest. Usually, their light emission is bimodal, and the gain competition of the associated linearly polarized fundamental emission modes results in complex switching dynamics. We report on selective optical injection into either one of the two fundamental mode components of a bimodal micropillar laser. Both modes can lock to the master laser and influence the non-injected mode by reducing the available gain. We demonstrate that the switching dynamics can be tailored externally via optical injection in very good agreement with our theory based on semi-classical rate equations. (C) 2019 Optical Society of America under the terms of the OSA Open Access Publishing Agreement
The rich phase diagram of transition metal oxides essentially roots in the many body physics arising from strong Coulomb interactions within the underlying electron system.
Understanding such electronic correlation effects remains challenging for modern solid state physics, therefore experimental data is required for further progress in the field. For this reason, spectroscopic investigations of prototypical correlated materials are the scope of this thesis. The experimental methods focus on photoelectron spectroscopy, and the test materials are the correlated metal SrVO\(_3\) and the Mott insulator LaTiO\(_3\), both of which are fabricated as high quality thin films.
In SrVO\(_3\) thin films, a reduction of the film thickness induces a dimensional crossover from the metallic into the Mott insulating phase. In this thesis, an extrinsic chemical contribution from a surface over-oxidation is revealed that emerges additionally to the intrinsic change of the effective bandwidth usually identified to drive the transition. The two contributions are successfully disentangled by applying a capping layer that prevents the oxidation, allowing for a clean view on the dimensional crossover in fully stoichiometric samples. Indeed, these stoichiometric layers exhibit a higher critical thickness for the onset of the metallic phase than the bare and therefore over-oxidized thin films.
For LaTiO\(_3\) thin films, the tendency to over-oxidize is even stronger. An uncontrolled oxygen diffusion from the substrate into the film is found to corrupt the electronic properties of LaTiO\(_3\) layers grown on SrTiO\(_3\). The Mott insulating phase is only detected in stoichiometric films fabricated on more suitable DyScO\(_3\) substrates. In turn, it is demonstrated that a \(controlled\) incorporation of excess oxygen ions by increasing the oxygen growth pressure is an effective way of \(p\) doping the material which is used to drive the band filling induced Mott transition.
Gaining control of the oxygen stoichiometry in both materials allows for a systematic investigation of correlation effects in general and of the Mott transition in particular. The investigations are realized by various photoelectron spectroscopy techniques that provide a deep insight into the electronic structure. Resonant photoemission not only gives access to the titanium and vanadium related partial density of states of the valence band features, but also shows how the corresponding signal is enhanced by tuning the photon energy to the \(L\) absorption threshold. The enhanced intensity turns out to be very helpful for probing the Fermi surface topology and band dispersions by means of angular-resolved photoemission. The resulting momentum resolved electronic structure verifies central points of the theoretical description of the Mott transition, viz. the renormalization of the band width and a constant Luttinger volume in a correlated metal as the Mott phase is approached.
Space- and time-resolved UV-to-NIR surface spectroscopy and 2D nanoscopy at 1 MHz repetition rate
(2019)
We describe a setup for time-resolved photoemission electron microscopy (TRPEEM) with aberration correction enabling 3 nm spatial resolution and sub-20 fs temporal resolution. The latter is realized by our development of a widely tunable (215–970 nm) noncollinear optical parametric amplifier (NOPA) at 1 MHz repetition rate. We discuss several exemplary applications. Efficient photoemission from plasmonic Au nanoresonators is investigated with phase-coherent pulse pairs from an actively stabilized interferometer. More complex excitation fields are created with a liquid-crystal-based pulse shaper enabling amplitude and phase shaping of NOPA pulses with spectral components from 600 to 800 nm. With this system we demonstrate spectroscopy within a single plasmonic nanoslit resonator by spectral amplitude shaping and investigate the local field dynamics with coherent two-dimensional (2D) spectroscopy at the nanometer length scale (“2D nanoscopy”). We show that the local response varies across a distance as small as 33 nm in our sample. Further, we report two-color pump–probe experiments using two independent NOPA beamlines. We extract local variations of the excited-state dynamics of a monolayered 2D material (WSe2) that we correlate with low-energy electron microscopy (LEEM) and reflectivity (LEER) measurements. Finally, we demonstrate the in-situ sample preparation capabilities for organic thin films and their characterization via spatially resolved electron diffraction and dark-field LEEM.
Astrophysical sources of gravitational waves, such as binary neutron star and black hole mergers or core-collapse supernovae, can drive relativistic outflows, giving rise to non-thermal high-energy emission. High-energy neutrinos are signatures of such outflows. The detection of gravitational waves and high-energy neutrinos from common sources could help establish the connection between the dynamics of the progenitor and the properties of the outflow. We searched for associated emission of gravitational waves and high-energy neutrinos from astrophysical transients with minimal assumptions using data from Advanced LIGO from its first observing run O1, and data from the Antares and IceCube neutrino observatories from the same time period. We focused on candidate events whose astrophysical origins could not be determined from a single messenger. We found no significant coincident candidate, which we used to constrain the rate density of astrophysical sources dependent on their gravitational-wave and neutrino emission processes.
This Letter presents a search for new light resonances decaying to pairs of quarks and produced in association with a high-p(T) photon or jet. The dataset consists of proton-proton collisions with an integrated luminosity of 36.1 fb(-1) at a centre-of-mass energy of root s = 13 TeV recorded by the ATLAS detector at the Large Hadron Collider. Resonance candidates are identified as massive large-radius jets with substructure consistent with a particle decaying into a quark pair. The mass spectrum of the candidates is examined for local excesses above background. No evidence of a new resonance is observed in the data, which are used to exclude the production of a lepto-phobic axial-vector Z' boson. (C) 2018 The Author(s). Published by Elsevier B.V.
A search for high-mass dielectron and dimuon resonances in the mass range of 250 GeV to 6TeV is presented. The data were recorded by the ATLAS experiment in proton-proton collisions at a centre-ofmass energy of root s = 13 TeV during Run 2 of the Large Hadron Collider and correspond to an integrated luminosity of 139 fb(-1). A functional form is fitted to the dilepton invariant-mass distribution to model the contribution from background processes, and a generic signal shape is used to determine the significance of observed deviations from this background estimate. No significant deviation is observed and upper limits are placed at the 95% confidence level on the fiducial cross-section times branching ratio for various resonance width hypotheses. The derived limits are shown to be applicable to spin-0, spin-1 and spin-2 signal hypotheses. For a set of benchmark models, the limits are converted into lower limits on the resonance mass and reach 4.5 TeV for the E-6-motivated Z(psi)' boson. Also presented are limits on Heavy Vector Triplet model couplings. (C) 2019 The Author. Published by Elsevier B.V.
A search for new particles decaying into a pair of top quarks is performed using proton-proton collision data recorded with the ATLAS detector at the Large Hadron Collider at a center-of-mass energy of root s = 13 TeV corresponding to an integrated luminosity of 36.1 fb(-1). Events consistent with top-quark pair production and the fully hadronic decay mode of the top quarks are selected by requiring multiple high transverse momentum jets including those containing b-hadrons. Two analysis techniques, exploiting dedicated top-quark pair reconstruction in different kinematic regimes, are used to optimize the search sensitivity to new hypothetical particles over a wide mass range. The invariant mass distribution of the two reconstructed top-quark candidates is examined for resonant production of new particles with various spins and decay widths. No significant deviation from the Standard Model prediction is observed and limits are set on the production cross-section times branching fraction for new hypothetical Z' bosons, dark-matter mediators, Kaluza-Klein gravitons and Kaluza-Klein gluons. By comparing with the predicted production cross sections, the Z' boson in the topcolor-assisted-technicolor model is excluded for masses up to 3.1-3.6 TeV, the dark-matter mediators in a simplified framework are excluded in the mass ranges from 0.8 to 0.9 TeV and from 2.0 to 2.2 TeV, and the Kaluza-Klein gluon is excluded for masses up to 3.4 TeV, depending on the decay widths of the particles.