Refine
Has Fulltext
- yes (22)
Is part of the Bibliography
- yes (22)
Year of publication
Document Type
- Doctoral Thesis (22)
Keywords
- Selbstorganisation (22) (remove)
Institute
- Institut für Organische Chemie (22) (remove)
The objective of this thesis focuses on the development of strategies for precise control of perylene bisimide (PBI) self-assembly and the in-depth elucidation of structural and optical features of discrete PBI aggregates by means of NMR and UV/Vis spectroscopy. The strategy for discrete dimer formation of PBIs is based on delicate steric control that distinguishes the two facets of the central perylene surface. The strategy applied in this thesis for accessing discrete PBI quadruple and further oligomeric stacks relies on backbone-directed PBI self-assembly. For this purpose, two tweezer-like PBI dyads bearing the respective rigid backbones, diphenylacetylene (DPA) and diphenylbutydiyne (DPB), were synthesized. The distinct aggregation behavior of these structurally similar PBI dyads can be ascribed to the intramolecular distance between the two PBI chromophores imparted by the DPA and DPB spacers.
Die Selbstorganisation von amphiphilen Molekülen zählt zu den am intensivsten bearbeiteten Forschungsgebieten der Supramolekularen Chemie. Die faszinierenden supramolekularen Architekturen der Natur zeigen eindrucksvoll, wie neuartige Funktionen durch das Zusammenspiel wohl-definierter Molekülensembles in einer wässrigen Umgebung entstehen. Es ist bekannt, dass der hydrophobe Effekt dabei eine entscheidende Rolle in der Selbstorganisation spielt und somit die Funktion eines Systems wesentlich bestimmt. Obwohl die Komplexität der bekannten Beispiele aus der Natur unerreicht ist, wurden in den letzten Jahren unzählige künstliche supramolekulare Architekturen basierend auf amphiphilen Molekülen erschaffen, mit vielfältigen Anwendungsmöglichkeiten an der Schnittstelle von Chemie, Biologie und Physik.
Darunter eröffnen insbesondere amphiphile π-konjugierte Systeme einen einfachen Zugang zu vielfältigen Strukturen, da im wässrigen Medium starke π-π-Wechselwirkungen als strukturbildendes Element ausgenutzt werden können. Vor allem wegen vielversprechender Anwendungsmöglichkeiten spiegelt sich die Selbstorganisation solcher Systeme in einem hohen Forschungsinteresse wider. Dennoch ist das Wirken des hydrophoben Effekts in der Selbstassemblierung amphiphiler π-konjugierter Moleküle weitgehend unverstanden.
Die vorliegende Arbeit befasste sich daher mit der Frage, welche physikochemischen Grundprinzipien die Bildung von supramolekularen Polymeren basierend auf amphiphilen π-konjugierten Molekülen in Wasser steuern und wie der hydrophobe Effekt die Funktionalität solcher Strukturen beeinflusst. Bolaamphiphile Perylenbisimide (PBIs) und Naphthalinbisimide (NBIs) erwiesen sich dabei für das Moleküldesign als besonders geeignet, weil sie vergleichsweise einfach dargestellt werden können, ihre hohe Symmetrie weniger komplexe Assoziationsprozesse begründet und die Untersuchung ihrer Selbstassemblierung im wässrigen Medium weiterhin einen Vergleich erlaubt, wie sich der hydrophobe Effekt bezüglich unterschiedlich großen π-Systemen auswirkt.
Es konnte gezeigt werden, dass OEG-basierte Rylenbisimide unter bestimmten strukturgeometrischen Voraussetzungen eine entropiegetriebene Aggregation aufweisen, wenn die Freisetzung von Wassermolekülen aus einer wohl-definierten Hydrathülle ausreicht, um den Enthalpiegewinn aus den im wässrigen Medium verstärkten Dispersionswechselwirkungen zwischen den π-Flächen zu übertreffen. Im vorliegenden Fall wurde dies durch das Pinsel-Strukturmotiv der symmetrisch angebrachten Imidsubstituenten erreicht, für die sich damit einhergehend eine gänzlich andere Temperaturabhängigkeit beobachten ließ und somit eine gänzlich andere Funktionalität, als man sie aus organischen Lösungsmitteln kennt. Wasser als Lösungsmittel führt also nicht nur zu einer signifikanten Bindungsverstärkung, sondern öffnet Zugang zu supramolekularen Systemen mit neuartigen Funktionen. Die entropiegetriebene Freisetzung von Wassermolekülen konnte daher im Rahmen dieser Arbeit ausgenutzt werden, um gleichzeitig die intrinsische Ordnung im π-Stapel von PBIs zu erhöhen, was anhand eines temperatursensorischen Hydrogels anschaulich demonstriert wurde.
Darüber hinaus stellte sich heraus, dass Wasser ein geeignetes Lösungsmittel zur Darstellung supramolekularer Kompositmaterialien ist. Wie anhand sich instantan bildender Co-Aggregate gezeigt wurde, ist die entropiegetriebene Assemblierung der entscheidende Faktor zur Darstellung von komplexeren supramolekularen Strukturen, die überdies einen Schritt hin zu den hochkomplexen multimolekularen Anordnungen der Natur darstellen.
The main objective of this thesis was the design and synthesis of perylene bisimide dyes with sufficient water-solubility for the construction of self-assembled architectures in aqueous solutions. Beside these tasks another goal of this project was the control over the self-assembly process in terms of aggregate size and helicity, respectively. Within this thesis an appropriate synthesis for spermine-functionalized perylene bisimide dyes was developed and conducted successfully. The characterization of these building blocks and their course of self-assembly were investigated by NMR, UV/Vis and fluorescence spectroscopy as well as by atomic force and transmission electron microscopy. For the better understanding of the experimental results theoretical calculations were performed.
The presented work in the field of supramolecular chemistry describes the synthesis and detailed investigation of (bi)pyridine-based oligo(phenylene ethynylene) (OPE) amphiphiles, decorated with terminal glycol chains. The metal-ligating property of these molecules could be exploited to coordinate to Pd(II) and Pt(II) metal ions, respectively, resulting in the creation of novel metallosupramolecular π-amphiphiles of square-planar geometry.
The focus of the presented studies is on the self-assembly behaviour of the OPE ligands and their corresponding metal complexes in polar and aqueous environment. In this way, the underlying aggregation mechanism (isodesmic or cooperative) is revealed and the influence of various factors on the self-assembly process in supramolecular systems is elucidated. In this regard, the effect of the molecular design of the ligand, the coordination to a metal centre as well as the surrounding medium, the pH value and temperature is investigated.
Within this thesis, synthetic strategies for self-assembled organic cage compounds have been developed that allow for both stimuli-responsive control over assembly/disassembly processes and spatial control over functionalization. To purposefully operate the reversible assembly of organic cages, boron-nitrogen dative bonds have been exploited for the formation of a well-defined, discrete bipyramidal organic assembly in solution. Thermodynamic association equilibria for cage formation have been investigated by Isothermal Titration Calorimetry (ITC). Temperature-dependent NMR studies revealed a reversible cage opening upon heating and quantitative reassembly upon cooling. For the spatial functionalization of organic cages, two divergent molecular building units have been designed and synthesized, namely tribenzotriquinacene derivatives possessing a terminal alkyne moiety at the apical position and a meta-diboronic acid having a pyridyl group at the 2-position. Facile access to a variety of apically functionalized tribenzotriquinacenes has been illustrated by post-synthetic modifications at the terminal alkyne group by Sonogashira cross-coupling and azide-alkyne click reactions. Finally, these apically functionalized tribenzotriquinacene building blocks have been implemented into boronate ester-based organic cage compounds showing modular exohedral functionalities.
Poröse funktionelle Materialien sind vielversprechende Kandidaten für Anwendungen wie zum Beispiel in der heterogenen Katalyse, in Sensormaterialien, für die Gasspeicherung sowie –separation oder in Membranen. Eine besondere Klasse solcher Materialien stellen die organischen Käfigverbindungen dar, da sie im Vergleich zu netzwerkartigen Strukturen einzigartige Eigenschaften aufweisen. Das Gerüst des Tribenzotriquinacens (TBTQ) besitzt drei zueinander orthogonal stehende Indaneinheiten, sodass es sich optimal als Baustein für die effiziente Synthese organischer Käfigmoleküle eignet.
In dieser Arbeit wird die Synthese molekularer Würfel, Tetraeder und Bipyramiden mittels Quervernetzung der Catecholeinheiten der TBTQ-Bausteine mit verschiedenen Diboronsäuren beschrieben. Die Struktur und die Form der molekularen Objekte sind dabei durch die Geometrie der entsprechenden Diboronsäuren vorgegeben. Bemerkenswert ist, dass in ternären Mischungen der Bausteine das Phänomen der Selbssortierung zu beobachten ist. Sowohl narzisstische als auch soziale Selbstsortierung konnte hierbei festgestellt werden.
Darüber hinaus wurde für den bipyramidalen Käfig Wirt-Gast Komplexierung beobachtet. Die Fullerene C60 und C70 wurden nahezu quantitativ in das Molekül eingeschlossen. Weitere Untersuchungen zu diesem Verhalten zeigten in einer kompetitiven Mischung aus C60 und C70 eine Präferenz des Käfigmoleküls zu C60.
The present thesis describes the development of a strategy to create discrete finite-sized supramolecular stacks of merocyanine dyes. Thus, bichromophoric stacks of two identical or different chromophores could be realized by folding of bis(merocyanine) dyes and their optical properties were discussed in terms of exciton theory. Quantum chemical calculations revealed strong exciton coupling between the chromophores within the homo- and hetero-π-stacks and the increase of the J-band of the hetero-dimers with increasing energy difference between the excited states of the chromophores could be attributed not only to the different magnitudes of transition dipole moments of the chromophores but also to the increased localization of the excitation in the respective exciton state. Furthermore, careful selection of the length of the spacer unit that defines the interplanar distance between the tethered chromophores directed the self-assembly of the respective bis(merocyanines) into dimers, trimers and tetramers comprising large, structurally precise π-stacks of four, six or eight merocyanine chromophores. It could be demonstrated that the structure of such large supramolecular architectures can be adequately elucidated by commonly accessible analysis tools, in particular NMR techniques in combination with UV/vis measurements and mass spectrometry. Supported by TDDFT calculations, the absorption spectra of the herein investigated aggregates could be explained and a relationship between the absorption properties and the number of stacking chromophores could be established based on exciton theory.
Supramolecular self-assembly of perylene bisimide (PBI) dyes via non-covalent forces gives rise to a high number of different PBI architectures with unique optical and functional properties. As these properties can be drastically influenced by only slightly structural changes of the formed supramolecular ensembles (Chapter 2.1) the controlled self-assembly of PBI dyes became a central point of current research to design innovative materials with a high potential for different applications as for example in the fields of organic electronics or photovoltaics.
As PBI dyes show a strong tendency to form infinite aggregated structures (Chapter 2.2) the aim of this thesis was to precisely control their self-assembly to create small, structurally well-defined PBI assemblies in solution. Chapter 2.3 provides an overview on literature known strategies that were established to realize this aim. It could be demonstrated that especially backbone-directed intra- and intermolecular self-assembly of covalently linked Bis-PBI dyes evolved as one of the most used strategies to define the number of stacked PBI chromophores by using careful designed spacer units with regard to their length and flexibility.
By using conventional spectroscopic methods like UV/Vis and fluorescence experiments in combination with NMR measurements an in-depth comparison of the molecular and optical properties in solution both in the non-stacked and aggregated state of the target compounds could be elucidated to reveal structure-property relationships of different PBI architectures. Thus, it could be demonstrated, that spacer units that pre-organize two PBI chromophores with an inter-planar distance of r < 7 Å lead to an intramolecular folding, whereas linker moieties with a length between 7 to 11 Å result in an intermolecular self-assembly of the respective Bis-PBIs dyes via dimerization to form well-defined quadruple PBI pi-stacks. Hence, if the used spacer units ensure an inter-planar distance r > 14 Å larger oligomeric PBI pi-stacks are generated.
In Chapter 4 a detailed analysis of the exciton coupling in a highly defined H-aggregate quadruple PBI pi-stack is presented. Therefore, bay-tethered PBI dye Bis-PBI 1 was investigated by concentration-dependent UV/Vis spectroscopy in THF and toluene as well as by 2D-DOSY-NMR spectroscopy, ESI mass spectrometry and AFM measurements confirming that Bis-PBI 1 self-assembles exclusively into dimers with four closely pi-stacked PBI chromophores. Furthermore, with the aid of broadband fluorescence upconversion spectroscopy (FLUPS) ensuring broadband detection range and ultrafast time resolution at once, ultrafast Frenkel exciton relaxation and excimer formation dynamics in the PBI quadruple pi-stack within 1 ps was successfully investigated in cooperation with the group of Dongho Kim. Thus, it was possible to gain for the first time insights into the exciton dynamics within a highly defined synthetic dye aggregate beyond dimers. By analysing the vibronic line shape in the early-time transient fluorescence spectra in detail, it could be demonstrated that the Frenkel exciton is entirely delocalized along the quadruple stack after photoexcitation and immediately loses its coherence followed by the formation of the excimer state.
In Chapter 5 four well-defined Bis-PBI folda-dimers Bis-PBIs 2-4 were introduced, where linker units of different length (r < 7 Å) and steric demand were used to gain distinct PBI dye assemblies in the folded state. Structural elucidation based on in-depth UV/Vis, CD and fluorescence experiments in combination with 1D and 2D NMR studies reveals a stacking of the two PBI chromophores upon folding, where geometry-optimized structures obtained from DFT calculations suggest only slightly different arrangements of the PBI units enforced by the distinct spacer moieties. With the resulting optical signatures of Bis-PBIs 2-4 ranging from conventional Hj-type to monomer like absorption features, the first experimental proof of a PBI-based “null-aggregate” could be presented, in which long- and short-range exciton coupling fully compensate each other. Hence, the insights of this chapter pinpoint the importance of charge-transfer mediated short-range exciton coupling that can significantly influence the properties of pi-stacked PBI chromophores
In the last part of this thesis (Chapter 6), spacer-controlled self-assembly of four bay-linked Bis-PBI dyes Bis-PBIs 5-8 into well-defined supramolecular architectures was investigated, where the final aggregate structures are substantially defined by the nature of the used spacer units. By systematically extending the backbone length from 7 to 15 Å defining the inter-planar distance between the tethered chromophores, different assemblies from defined quadruple PBI pi-stacks to larger oligomeric pi-stacks could be gained upon aggregation.
In conclusion, the synthesis of nine covalently linked PBI dyes in combination with a detailed investigation of their spacer-mediated self-assembly behaviour in solution concerning structure-properties-relationships was presented within this thesis. The results confirm a strong exciton coupling in different types of Bis-PBI architectures e.g. folda-dimers or highly defined quadruple pi-stacks, which significantly influences their optical properties upon self-assembly.
The present thesis demonstrates how different thermodynamic aspects of self-assembly and stimuli-responsive properties in water can be encoded on the structure of π-amphiphiles, consisting of perylene or naphthalene bisimide cores. Initially, quantitative thermodynamic insights into the entropically-driven self-assembly was studied for a series of naphthalene bisimides with UV/Vis and ITC measurements, which demonstrated that their thermodynamic profile of aggregation is heavily influenced by the OEG side chains. Subsequently, a control over the bifurcated thermal response of entropically driven and commonly observed enthalpically driven self-assembly was achieved by the modulation of glycol chain orientation. Finally, Lower Critical Solution Temperature (LCST) phenomenon observed for these dyes was investigated as a precise control of this behavior is quintessential for self-assembly studies as well as to generate ‘smart’ materials. It could be shown that the onset of phase separation for these molecules can be encoded in their imide substituents, and they are primarily determined by the supramolecular packing, rather than the hydrophobicity of individual monomers.
The research presented in this thesis illustrates that self-assembly of organic molecules guided by intermolecular forces is a versatile bottom-up approach towards functional materials. Through the specific design of the monomers, supramolecular architectures with distinct spatial arrangement of the individual building blocks can be realized. Particularly intriguing materials can be achieved when applying the supramolecular approach to molecules forming liquid-crystalline phases as these arrange in ordered, yet mobile structures. Therefore, they exhibit anisotropic properties on a macroscopic level. It is pivotal to precisely control the interchromophoric arrangement as functions originate in the complex structures that are formed upon self-assembly. Consequently, the aim of this thesis was the synthesis and characterization of liquid-crystalline phases with defined supramolecular arrangements as well as the investigation of the structure-property relationship. For this purpose, perylene bisimide and diketopyrrolopyrrole chromophores were used as they constitute ideal building blocks towards functional supramolecular materials due to their thermal stability, lightfastness, as well as excellent optical and electronic features desirable for the application in, e.g., organic electronics.