Refine
Has Fulltext
- yes (40)
Is part of the Bibliography
- yes (40)
Year of publication
- 2011 (40) (remove)
Document Type
- Doctoral Thesis (27)
- Journal article (13)
Keywords
- MRI (4)
- Kernspintomografie (3)
- Molekularstrahlepitaxie (3)
- NMR-Bildgebung (3)
- NMR-Tomographie (3)
- Spintronik (3)
- DFB laser (2)
- DFB-Laser (2)
- Drei-Fünf-Halbleiter (2)
- Galliumarsenidlaser (2)
Institute
- Physikalisches Institut (40) (remove)
Der große Fortschritt der Halbleitertechnologie ermöglichte es in den letzten Jahren quantenoptische Phänomene nicht mehr nur ausschließlich an Atomen, sondern auch in einer Festkörpermatrix zu beobachten. Von besonderem Interesse sind dabei Phänomene der Licht-Materie-Wechselwirkung im Kontext der Quantenelektrodynamik in Kavitäten. Die äußerst aktive Forschung auf diesem Gebiet rührt daher, dass diese Phänomene bei der Realisierung neuartiger Lichtquellen für die Quanteninformationstechnologie benötigt werden. Die Verwirklichung von solchen speziellen Lichtquellen auf Halbleiterbasis besitzt entscheidende Vorteile im Hinblick auf die praktische Anwendbarkeit aufgrund der potentiell hohen Skalierbarkeit und Effizienz. Jedoch kann die erforderliche Licht-Materie-Wechselwirkung nur in qualitativ sehr hochwertigen Halbleiterstrukturen mit quasi nulldimensionalem Ladungsträger- und Lichteinschluss erfolgen. Hierbei wurden in den letzten Jahren enorme technologische Fortschritte bei der Prozessierung von Mikrokavitäten mit Quantenpunkten in der aktiven Schicht sowie bei der Beobachtung der gewünschten Licht-Materie-Wechselwirkung erzielt. Allerdings erfolgten diese Untersuchungen in erster Linie an optisch mithilfe eines externen Lasers angeregten Strukturen, wohingegen für die Praxis ein elektrischer Betrieb wünschenswert ist. Die für die elektrische Anregung von solchen Mikrostrukturen notwendige Kontaktierung kann darüber hinaus zur effizienten Manipulation der Emissionseigenschaften der Quantenemitter mittels eines elektrischen Feldes eingesetzt werden. Vor diesem Hintergrund werden im Rahmen dieser Arbeit die optischen und elektrischen Eigenschaften von kontaktierten Quantenpunkt-Mikrosäulenkavitäten eingehend untersucht. Ausgangspunkt dieser Mikrokavitäten sind planare Schichtstrukturen auf der Basis von GaAs und AlAs mit InGaAs-Quantenpunkten mit variierendem Indiumgehalt in der aktiven Schicht. Der Schwerpunkt der Untersuchungen lag hierbei auf vertikal elektrisch kontaktierten Mikrosäulenresonatoren, deren Aufbau vertikal emittierenden Laserdioden ähnelt. Die Besonderheit der neuartigen Kontaktierung liegt darin, dass aufgrund der Strominjektion durch die Seitenwände im oberen Bereich des Mikrosäulenresonators die Facette der Struktur frei von jeglichem absorbierenden Material gehalten wird. Hierdurch kann eine effiziente Lichtauskopplung gewährleistet werden. Des Weiteren wurde auch ein Verfahren zur seitlichen Kontaktierung von undotierten Mikrosäulenresonatoren entwickelt und optimiert, was eine spezielle Manipulation der Quantenpunktemission in einem lateralen elektrischen Feld erlaubt. Als Untersuchungsmethode wird bei allen Experimenten in erster Linie die Mikrolumineszenzspektroskopie bei tiefen Temperaturen verwendet und durch die Methode der Photostromspektroskopie sowie Autokorrelationsmessungen erster und zweiter Ordnung ergänzt ...
Im Rahmen dieser Arbeit wurden mit Hilfe von hochaufgelöster ARPES die Auswirkungen verschiedener intrinsischer und extrinsischer Einflüsse auf zweidimensionale elektronische Zustände untersucht: Eine Änderung der Morphologie aufgrund einer (2 × 1)-Rekonstruktion bewirkt beim OFZ von Au(110) im Vergleich zur nicht-rekonstruierten Oberfläche eine Verschiebung der Bindungsenergie von ca. 700meV. Dieses Verhalten wurde in LDA-slab-layer-Rechungen reproduziert und durch gezielte Modifikation der Oberflächenstruktur sowie kontrollierte Beeinflussung des OFZ durch die Adsorbate Ag, Na und Au verstanden. Eine Linienbreitenanalyse der sehr scharfen Minoritäts-QWS in dünnen Fe- Filmen auf W(110) ermöglichte eine Abschätzung der Elektron-Elektron- Wechselwirkung und eine Bestimmung der Elektron-Phonon-Kopplungskonstanten. Die starke Anisotropie der Dispersion der QWS ist des weiteren durch den Vergleich mit GGA-slab-layer-Rechnungen als intrinsische Eigenschaft dieser Zustände identifiziert worden. Mit Hilfe eines erweiterten PAM wurde zudem die k⊥-Dispersion des, den QWS zugrunde liegenden Volumenbandes, bestimmt. Die spinabhängigen Einflussfaktoren Spin-Orbit- und Austausch-Wechselwirkung sowie deren Kombination wurden am Beispiel des OFZ von dünnen Au-Filmen auf Ni(111), sowie an QWS in dünnen Ni-Filmen auf W(110) untersucht. Die in SPR-KKR-Photoemissionrechungen gefundene leichte Asymmetrie der spinaufgelösten Dispersion wurde in den spinintegrierten ARPESMessungen nicht beobachtet. Ab 9ML Au-Bedeckung konnte die Rashba- Aufspaltung des OFZ aufgelöst werden. Eine durch das W(110)-Substrat induzierte Rashba-Aufspaltung wurde bei sp-artigen QWS in dünnen Ni- Filmen beobachtet, welche jedoch mit weiteren Strukturen hybridisieren, was eine eindeutige Aussage über die tatsächliche Natur der Aufspaltung erschwert.
Since the discovery of spin torque in 1996, independently by Berger and Slonczewski, and given its potential impact on information storage and communication technologies, (e.g. through the possibility of switching the magnetic configuration of a bit by current instead of a magnetic field, or the realization of high frequency spin torque oscillators (STO), this effect has been an important field of spintronics research. One aspect of this research focuses on ferromagnets with low damping. The lower the damping in a ferromagnet, the lower the critical current that is needed to induce switching of a spin valve or induce precession of its magnetization. In this thesis ferromagnetic resonance (FMR) studies of NiMnSb layers are presented along with experimental studies on various spin-torque (ST) devices using NiMnSb. NiMnSb, when crystallized in the half-Heusler structure, is a half-metal which is predicted to have 100% spin polarization, a consideration which further increases its potential as a candidate for memory devices based on the giant magnetoresistance (GMR) effect. The FMR measurements show an outstandingly low damping factor for NiMnSb, in low 10-3 range. This is about a factor of two lower than permalloy and well comparable to lowest damping for iron grown by molecular beam epitaxy (MBE). According to theory the 100% spin polarization properties of the bulk disappear at interfaces where the break in translational symmetry causes the gap in the minority spin band to collapse but can remain in other crystal symmetries such as (111). Consequently NiMnSb layers on (111)(In,Ga)As buffer are characterized in respect of anisotropies and damping. The FMR measurements on these samples indicates a higher damping that for the 001 samples, and a thickness dependent uniaxial in-plane anisotropy. Investigations of the material for device use is pursued by considering sub-micrometer sized elements of NiMnSb on 001 substrates, which were fabricated by electron-beam lithography and measured by ferromagnetic resonance. The damping remains in the low 10-3 range as determined directly by extracting the Gilbert damping from the line width. Additionally magnetostatic modes are observed in arrays of elements, which is further evidence of high material quality of the samples. By sputtering various metals on top of the NiMnSb, spin pumping from the ferromagnet into the non-magnetic layer is investigated. After these material investigations, pseudo-spin-valves using NiMnSb as one of the ferromagnet, in combination with Permalloy were fabricating using a self-aligned lithography process. These samples show a GMR ratio of 3.4% at room temperature and almost double at low temperature, comparing favourably to the best single stack GMR structures reported to date. Moreover, current induced switching measurements show promisingly low current densities are necessary to change the magnetic orientation of the free layer. These current densities compete with state-of-the-art GMR devices for metal based structures and almost with tunnel junction devices. The true potential of these devices however comes to light when they are operated as spin torque oscillators to emit high frequency, tunable, narrow spectrum electromagnetic waves. These Heusler based STOs show an outstanding q-factor of 4180, even when operating in the absence of an external field, a value which bests the highest value in the literature by more than an order of magnitude. While these devices currently still suffer from the same limited output power as all STO reported to date, their sub-micron lateral dimensions make the fabrication of an on-chip array of coupled oscillators, which is a promising path forward towards industrially relevant output power.
In this thesis a systematic analysis of the correlation effects between lattice dynamics and magnetism in the Multiferroic Manganites RMnO3 with Pnma structure was conducted. For this task, Raman and FT-IR Spectroscopy were employed for an investigation of all optically accessible lattice vibrations, i.e. phonons. To study the correlation effects as well as their specific connections to symmetry and compositional properties of the Multiferroic Manganites, the polarisation and temperature dependence of the phonons were considered explicitly. In combination with lattice dynamical calculations based on Density Functional Theory, two coupling effects - Spin-Phonon Coupling and Electromagnon-Phonon Coupling - were systematically analysed.
The charge transport in disordered organic bulk heterojunction (BHJ) solar cells is a crucial process affecting the power conversion efficiency (PCE) of the solar cell. With the need of synthesizing new materials for improving the power conversion efficiency of those cells it is important to study not only the photophysical but also the electrical properties of the new material classes. Thereby, the experimental techniques need to be applicable to operating solar cells. In this work, the conventional methods of transient photoconductivity (also known as "Time-of-Flight" (TOF)), as well as the transient charge extraction technique of "Charge Carrier Extraction by Linearly Increasing Voltage" (CELIV) are performed on different organic blend compositions. Especially with the latter it is feasible to study the dynamics, i.e. charge transport and charge carrier recombination, in bulk heterojunction (BHJ) solar cells with active layer thicknesses of 100-200 nm. For a well performing organic BHJ solar cells the morphology is the most crucial parameter finding a trade-off between an efficient photogeneration of charge carriers and the transport of the latter to the electrodes. Besides the morphology, the nature of energetic disorder of the active material blend and its influence on the dynamics are discussed extensively in this work. Thereby, the material system of poly(3-hexylthiophene-2,5-diyl) (P3HT) and [6,6]-phenyl-C61 butyric acid methyl ester (PC61BM) serves mainly as a reference material system. New promising donor or acceptor materials and their potential for application in organic photovoltaics are studied in view of charge dynamics and compared with the reference system. With the need for commercialization of organic solar cells the question of the impact of environmental conditions on the PCE of the solar cells raises. In this work, organic BHJ solar cells exposed to synthetic air for finite duration are studied in view of the charge carrier transport and recombination dynamics. Finally, within the framework of this work the technique of photo-CELIV is improved. With the modified technique it is now feasible to study the mobility and lifetime of charge carriers in organic solar cells under operating conditions.
In Vivo Imaging of Stepwise Vessel Occlusion in Cerebral Photothrombosis of Mice by \(^{19}\)F MRI
(2011)
Background
\(^{19}\)F magnetic resonance imaging (MRI) was recently introduced as a promising technique for in vivo cell tracking. In the present study we compared \(^{19}\)F MRI with iron-enhanced MRI in mice with photothrombosis (PT) at 7 Tesla. PT represents a model of focal cerebral ischemia exhibiting acute vessel occlusion and delayed neuroinflammation.
Methods/Principal Findings
Perfluorocarbons (PFC) or superparamagnetic iron oxide particles (SPIO) were injected intravenously at different time points after photothrombotic infarction. While administration of PFC directly after PT induction led to a strong \(^{19}\)F signal throughout the entire lesion, two hours delayed application resulted in a rim-like \(^{19}\)F signal at the outer edge of the lesion. These findings closely resembled the distribution of signal loss on T2-weighted MRI seen after SPIO injection reflecting intravascular accumulation of iron particles trapped in vessel thrombi as confirmed histologically. By sequential administration of two chemically shifted PFC compounds 0 and 2 hours after illumination the different spatial distribution of the \(^{19}\)F markers (infarct core/rim) could be visualized in the same animal. When PFC were applied at day 6 the fluorine marker was only detected after long acquisition times ex vivo. SPIO-enhanced MRI showed slight signal loss in vivo which was much more prominent ex vivo indicative for neuroinflammation at this late lesion stage.
Conclusion
Our study shows that vessel occlusion can be followed in vivo by \(^{19}\)F and SPIO-enhanced high-field MRI while in vivo imaging of neuroinflammation remains challenging. The timing of contrast agent application was the major determinant of the underlying processes depicted by both imaging techniques. Importantly, sequential application of different PFC compounds allowed depiction of ongoing vessel occlusion from the core to the margin of the ischemic lesions in a single MRI measurement.
Stoffe mit schnell zerfallendem Magnetresonanz (MR)-Signal sind mit herkömmlichen MR- Sequenzen nicht darstellbar. Solche Stoffe haben meist starke Bindungen, wie im menschlichen Körper beispielsweise Sehnen, Bänder, Knochen oder Zähne. In den letzten Dekaden wurden spezielle Sequenzen mit ultrakurzer Echozeit entwickelt, die Signale von diesen Stoffen messen können. Messungen mit ultrakurzen Echozeiten eröffnen der Kernspintomographie neue Anwendungsgebiete. In dieser Doktorarbeit werden die in der Literatur bekannten Methoden zur Messung mit ultrakurzen Echozeiten untersucht und evaluiert. Es werden zwei neue, in dieser Arbeit entwickelte Ansätze vorgestellt, die es zum Ziel haben, bestehende Probleme der vorhandenen Methoden bei robuster Bildqualität zu lösen, ohne auf Hardwareänderungen am Kernspintomographen angewiesen zu sein. Die ’Gradient Optimized Single Point imaging with Echo time Leveraging’ (GOSPEL) Sequenz ist eine Single-Point-Sequenz, die im Vergleich zu den bekannten Single-Point-Sequenzen eine stark reduzierte Echozeit ermöglicht. Es wird gezeigt, dass dadurch ein deutlich besseres Signalzu-Rausch-Verhältnis (SNR) von Stoffen mit schnell zerfallendem Signal erreicht wird. Das Problem der sehr langen Messzeit bei Single-Point-Verfahren wird mit der ’Pointwise Encoding Time reduction with Radial Acquisition’ (PETRA) Sequenz gelöst. Bei diesem Ansatz wird der k-Raum-Außenbereich radial und das k-Raum-Zentrum single-point-artig abgetastet. Durch die Kombination beider Akquisitionsstrategien ist eine schnelle und robuste Bildgebung mit ultrakurzer Echozeit und ohne Hardwareänderungen möglich. Wie bei anderen Ansätzen sind bei der PETRA-Sequenz die Bildgebungsgradienten zum Anregungszeitpunkt bereites angeschaltet. Es wird untersucht, welchen Einfluss ungewollte Schichtselektionen auf die Bildgebung haben können und ein Korrekturalgorithmus entwickelt, mit dem sich dadurch entstehende Artefakte im Bild beheben lassen. Die Limitationen des Korrekturalgorithmus sowie mögliche Artefakte der PETRA-Sequenz werden untersucht und diskutiert. Erste Anwendungsbeispiele der PETRA-Sequenz bei verschiedenen Feldstärken und Applikationen werden demonstriert. Wie bei anderen Sequenzen mit ultrakurzen Echozeiten sind die Gradientenaktivitäten bei der PETRA- und GOSPEL-Sequenz gering, wodurch die Messung sehr leise sein kann. Lautstärkemessungen zeigen, dass bei Messungen mit der PETRA-Sequenz der Geräuschpegel um nur ein bis fünf dB(A) im Vergleich zum Hintergrundgeräuschpegel steigt. Es wird demonstriert, dass sich dadurch neue Anwendungsgebiete eröffnen könnten. Vergleichsmessungen zwischen einer T1-gewichteten PETRA- und einer MPRAGE-Messung weisen Bilder auf, die in Kontrast, Auflösung, SNR und Messzeit vergleichbar sind. Mit den in dieser Arbeit entwickelten Methoden konnten Probleme bestehender Ansätze gelöst und offene Fragen beantwortet werden. Die Ergebnisse können helfen, Applikationen von Sequenzen mit ultrakurzen Echozeiten in der klinischen Routine weiter zu etablieren.
The charge transport properties of disordered organic and nanocrystalline inorganic semiconductors as well as their combinations have been investigated in regard to the charge carrier density employing field-effect-transistor structures. The results were discussed in the framework of different theoretical models. In organic semiconductors the presence of positional and energetic disorder determines the transport of charges through the respective thin films and interfaces. The electronic disorder is characterized by statistically distributed and localized transport sites which were shown to form a Gaussian density of states. In this electronic environment the charge transport occurs via thermally activated hopping between the localized states and therefore depends on the temperature and the local electric field. Particularly, a dependence of the carrier mobility on the charge carrier concentration is observed due to filling of tail states. Inorganic nanocrystalline semiconductors, however, are expected to present a different electronic structure: Within the volume of a nanocrystallite the semiconductor is assumed to reflect the electronic properties of the crystalline bulk material. However, the outer shell is characterized by a relatively large density of surface states and correspondingly bending of the energy bands, which creates an energetic barrier between the adjacent particles. In a nanocrystalline thin film this characteristic can be rate-limiting for the inter-particle carrier transport as reflected by reduced charge carrier mobility. The effective barrier height can be reduced by controlled doping of the nanocrystals which results in improved majority carrier transfer rates across the barrier. However, doping results in the simultaneous increase of the defect density and consequently to enhanced limitation of the mobility due to charge carrier scattering. In the experiments, thin films of commercially available p- and n-type organic semiconductors (P3HT, and two derivatives of PCBM) were investigated in field-effect transistor structures. Further, sol-gel synthesized n-type nanocrystalline-ZnO (nc-ZnO) with varied doping concentration (agent: aluminum Al$^{3+}$) was introduced in order to establish an alternative way of customizing the charge transport properties of the neat material and in combination with the organic polymer semiconductor P3HT.
The contribution of the present thesis consists of three parts. They are centered around investigating certain semiconductor heterointerfaces relevant to spin injection, exploring novel, diluted magnetic single barrier tunneling structures, and further developing diluted magnetic II-VI resonant tunneling diodes.
Super-resolution fluorescence imaging based on inglemolecule localization relies critically on the availability of efficient processing algorithms to distinguish, identify, and localize emissions of single fluorophores. In multiple current applications, such as threedimensional, time-resolved or cluster imaging, high densities of fluorophore emissions are common. Here, we provide an analytic tool to test the performance and quality of localization microscopy algorithms and demonstrate that common algorithms encounter difficulties for samples with high fluorophore density. We demonstrate that, for typical single-molecule localization microscopy methods such as dSTORM and the commonly used rapidSTORM scheme, computational precision limits the acceptable density of concurrently active fluorophores to 0.6 per square micrometer and that the number of successfully localized fluorophores per frame is limited to 0.2 per square micrometer.