Filtern
Volltext vorhanden
- ja (15)
Gehört zur Bibliographie
- ja (15)
Erscheinungsjahr
Dokumenttyp
- Dissertation (15)
Schlagworte
- HPLC (15) (entfernen)
Institut
- Institut für Pharmazie und Lebensmittelchemie (15) (entfernen)
Sonstige beteiligte Institutionen
The work presented in this thesis was mainly targeted at exploring the capabilities of evaporation based LC detectors as well as further alternatives for the control of impurities in substances not exhibiting a suitable chromophore for UV-detection. In the course of the work carried out, several new methods for the identification, impurities control and composition testing of APIs were elaborated. An evaporation based detector that entered into the field of pharmaceutical analysis in the recent years was the Evaporative Light Scattering Detector (ELSD). However, non-reproducible spikes were reported when injecting concentrated test solutions as they are usually required for the control of impurities. The reasons, for the appearance of these spikes as well as possibilities for their avoidance were explored in a systematic study. Moreover, the dependence of the detector sensitivity on different eluent composition, eluent flow-rate and ELSD settings was investigated. In the course of the revision of the Ph.Eur. monographs for aspartic acid and alanine, a C18 reversed phase ion-pair LC method using 1 mmol/L of perfluoroheptanoic acid as an ion-pair reagent and a charged aerosol detector (CAD) was developed and fully validated for the purity control of Asp. The method was capable of separating the organic acids and major amino acids known to occur as process related impurities. With a slight modification, the method was also applicable for the purity control of Ala. Based on the developed LC-CAD method for the impurity control of alanine, a comparative study of the performance characteristics of different evaporation based LC detectors, i.e. ELSD, CAD and the recently developed Nano Quantity Analyte Detector (NQAD) was carried out. Additionally, an MS detector and qNMR were included in this study. It was found that the control of impurities in Alanine at an ICH conform level could be ensured using LC coupled to CAD, MSD and NQAD detection as well as by the use of qNMR. In terms of performance, prize and ease of use CAD and NQAD were found to be the most suitable alternatives. In terms of repeatability and sensitivity, the CAD appeared slightly superior to the NQAD. The quality of streptomycin sulfate is not sufficiently controlled by the current Ph.Eur. monograph in that an appropriate test for the control of the related substances is missing. A study was carried out to develop a C18 reversed phase ion-pair LC method using pentafluoropropionic acid as an ion-pair reagent and a CAD for the identification and control of the related substances. The developed method allowed the separation of 21 impurities from streptomycin. Moreover, coupling of the method to MS allowed the identification of the separated impurities. The method was shown to be sufficiently sensitive to control the related substances with a disregard limit of 0.1% as it is normally applied in the Ph.Eur. for products derived from fermentation. Currently, the aescin content of horse-chestnut standardized dry extract is determined using a complex and laborious photometric determination. A more selective LC-UV assay determination for beta-aescin has been proposed for the Ph.Eur. draft monograph of horse-chestnut standardized dry extract. Possibilities were explored to further improve the LC-method using detection by CAD. It was demonstrated that by the use of a modified LC-CAD method several problems related to the differences in the UV-response of the various components contained in the active aescin fraction could be eliminated. Moreover the proposed reference standard strategy was reviewed. Eventually, it was demonstrated on the example of two different clusters of pharmacologically active peptides how low energy collision induced dissociation mass spectrometry (low energy CID-MS) can successfully be used for identification testing in pharmacopoeial monographs. In this respect, the combination of a direct confirmation of the molecular mass via the m/z-ratio of the molecule ions with structural sequence information obtained by low energy CID-MS experiments was found to deliver a higher degree of certainty of the identity of a given substance than the set of tests currently described in the monographs. A significant gain in efficiency and throughput and important reduction of the amount of sample consumed during testing were identified as being additional advantages of this approach. Taken together, it could be demonstrated on various examples how recent technological advancements in the field of analytical chemistry can contribute to improve the quality control of APIs.
Im Rahmen der vorliegenden Arbeit wurden analytische Methoden zur Bestimmung des Verunreinigungsprofils von Erythromycin entwickelt, die der bestehenden Ph.Eur.-Methode überlegen sind. Die neue HPLC-Methode ist in der Lage, alle verwandten Verbindungen mit angemessener Präzision nachzuweisen und zu quantifizieren. Mit Hilfe der Massenspektrometrie konnten alle Hauptkomponenten und verwandten Verbindungen der Base, ihrer Ester und Salze eindeutig identifiziert und quantifiziert werden. Zudem konnten zwei neue verwandte Verbindungen von Erythromycin gefunden und als N,N-Didemethylerythromycin A und Anhydroerythromycin F identifiziert werden.
Although the prevalence of substandard and counterfeit pharmaceutical products is a global problem, it is more critical in resource-constrained countries. The national medicines regulatory authorities (MNRA) in these countries have limited resources to cater for regular quality surveillance programmes aimed at ensuring that medicines in circulation are of acceptable quality. Among the reasons explained to hinder the implementation of these strategies is that compendial monographs are too complicated and require expensive infrastructures in terms of environment, equipment and consumables. In this study it was therefore aimed at developing simple, precise, and robust HPLC and HPTLC methods utilizing inexpensive, readily available chemicals (methanol and simple buffers) that can determine the APIs, other API than declared one, and which are capable of impurity profiling. As an outcome of this study, three isocratic and robust HPLC and two HPTLC methods for sulfadoxine, sulfalene, pyrimethamine, primaquine, artesunate, as well as amodiaquine have been developed and validated. All HPLC methods are operated using an isocratic elution mode which means they can be implemented even with a single pump HPLC system and standard C18 columns. The densitometric sulfadoxine/sulfalene and pyrimethamine method utilizes standard TLC plates as well as inexpensive, readily available and safe chemicals (toluene, methanol, and ethyl acetate), while that for artesunate and amodiaquine requires HPTLC plates as well as triethylamine and acetonitrile due to challenges associated with the analysis of amodiaquine and poorly the detectable artesunate. These HPTLC methods can be implemented as alternative to those requiring HPLC equipment e.g. in countries that already have acquired densitometer equipment. It is understood that HPTLC methods are less sensitive, precise and accurate when compared to HPLC methods, but this hindrance can easily be addressed by sending representative samples to third party quality control laboratories where the analytical results are verified using compendial HPLC methods on a regular basis.
It is therefore anticipated that the implementation of these methods will not only address the problem of limited resources required for medicines quality control but also increase the number of monitored targeted antimalarial products as well as the number of resource- constrained countries participating in quality monitoring campaigns. Moreover, the experiences and skills acquired within this work will be applied to other API groups, e. g. antibiotics, afterwards.
Im Rahmen dieser Arbeit wurden sehr einfache, flüssigchromatographische Methoden zur Qualitätsanalytik gebräuchlicher Antimalaria-Medikamente (Amodiaquin, Mefloquin, Proguanil sowie die Kombination Artemether/Lumefantrin) entwickelt, die nur wenige, günstig erhältliche Chemikalien (Phosphatpuffer, Methanol) sowie gewöhnliche, kommerzielle RP-18-Säulen benötigen. Sie sind insbesondere zur Anwendung in Laboratorien in Entwicklungsländern geeignet und erfordern keine komplexen HPLC-Instrumente wie beispielsweise Gradientenpumpen oder Säulenthermostate. Der Verzicht auf Ionenpaarreagenzien ermöglicht es, dass eine stationäre Phase für mehr als nur einen einzigen Einsatzzweck verwendet werden kann und dass langwierige Äquilibrier- bzw. Spülschritte nicht notwendig sind. Alle Methoden arbeiten im isokratischen Elutionsmodus und durch die Verwendung kurzer Säulen (125 mm) konnten die jeweiligen Analysenzeiten zusätzlich verringert werden. Hierdurch ist zudem eine Reduzierung des Fließmittelverbrauches möglich.
Während der Methodenentwicklung wurden charakteristische, aus dem Herstellungsweg des jeweiligen Arzneistoffes stammende potentielle Verunreinigungen berücksichtigt. Ihre Bestimmung erlaubt eine Aussage über die Herkunft eines Wirkstoffes bzw. eines Arzneimittels, da das Verunreinigungsmuster einer Substanz oftmals die Zuordnung zu einem bestimmten Herstellungs- bzw. Reinigungsprozess ermöglicht.
Alle Methoden wurden hinsichtlich der Linearität innerhalb des Arbeitsbereiches sowie der Wiederholpräzision charakterisiert. Es wurde eine gute Reproduzierbarkeit gefunden. Die Nachweis- und Bestimmungsgrenzen der untersuchten Verunreinigungen lagen bei einem Level von je 0.1 %. Durch gezielte Variation wurde der Einfluss wechselnder Trenntemperaturen sowie schwankender pH-Werte der jeweiligen mobilen Phase und die hieraus resultierenden Effekte untersucht. Hierbei zeigte sich, dass die Methoden sehr robust gegenüber diesen Einflussgrößen sind und somit für die Anwendung mit einfach ausgestatteten HPLC-Systemen sowie besonders für den Einsatz in tropische Gebieten mit wechselnden klimatischen Bedingungen gut geeignet sind.
Flüssigchromatographische Methoden spielen heute in der pharmazeutischen Analytik vor allem zur Bestimmung der Reinheit eines Arzneistoffes eine herausragende Rolle und sind in nahezu jeder Monographie der wichtigsten Arzneibücher (z. B. im Ph. Eur.) zu finden. Einfach durch-führbare Untersuchungsmethoden, wie beispielsweise die im GPHF-Minilab® angewandte Dünnschichtchromatographie, erfordern im Vergleich zur HPLC weniger komplexe und teure Instrumente und können selbst in entlegenen Gebieten ohne Laboratorium durchführt werden. Sie verfügen allerdings über eine nur sehr geringe Genauigkeit und Reproduzierbarkeit, da sowohl die praktische Durchführung als auch die anschließende Auswertung rein manuell bzw. visuell erfolgt und somit in hohem Maße einer Beeinflussung durch den jeweiligen Analytiker unterworfen ist. Die entwickelten HPLC-Methoden wurden mit dünnschichtchromatographischen Verfahren verglichen, hierbei besonders unter dem Aspekt der visuellen und der instrumentellen Auswertung der Chromatogramme zur Bestimmung des Gehaltes einer unbekannten Probe. Hierbei konnte aufgezeigt werden, dass die Dünnschichtchromatographie der Flüssigchromatographie eindeutig unterlegen ist, insbesondere wenn die Auswertung nicht mittels eines entsprechenden Scanners sondern rein visuell erfolgt: Nur in den wenigsten Fällen ist es möglich, eine annähernd präzise Aussage über den Gehalt zu treffen und zudem ist die Bestimmung der Verwandten Substanzen nur sehr bedingt möglich. Durch den Einsatz von Auftragegeräten bzw. Plattenscannern kann die Genauigkeit zwar signifikant erhöht werden, allerdings sind solche Instrumente im Verhältnis wesentlich teurer als einfache, modulare HPLC-Systeme und zählen heute in den wenigsten Laboratorien zum Standardinventar.
Vereinfachte chromatographische Methoden können ein wichtiges Hilfsmittel für Kontrolllaboratorien in Entwicklungsländern sein, wenn komplexe, etablierte Protokolle nur eingeschränkt angewendet werden können. Durch die Kombination aus dünnschichtchromatographischer Basisanalytik und einer flächendeckenden Untersuchung mittels HPLC lässt sich die Arzneimittelqualität sehr gut überprüfen, die regulatorischen Organe eines Landes entsprechend zu entlasten und die Versorgung der Bevölkerung mit qualitativ einwandfreien Medikamenten zu gewährleisten.
Ein weiterer Teil der Arbeit befasst sich mit der Stabilitätsanalytik individuell hergestellter, Noradrenalin-haltiger Injektionslösungen. Solche Rezepturen werden oftmals in Krankenhausapotheken im Rahmen der Defektur auf Vorrat durch Verdünnen der entsprechenden kommerzieller Fertigarzneimittel mit isotonischer Kochsalzlösung zubereitet, um z. B. für Notfallsituationen am Wochenende die Rezepturen vorrätig zu haben. Durch die Untersuchungen wurde geprüft, inwieweit der übliche Verdünnungsgrad von 0.1 % einen Einfluss auf die Stabilität des Noradrenalins hat und welche Lagerungsbedingungen für die Zubereitungen empfohlen werden können. Nach der Lagerung unter verschiedenen Bedingungen (gekühlt, bei Raumtemperatur sowie jeweils mit bzw. ohne Lichtschutz) konnte gezeigt werden, dass die Gehalte an Noradrenalin bei keiner der untersuchten Lagerungsbedingungen unter einen Wert von 99.0 % fielen. Individuell hergestellte Noradrenalin-Injektionslösungen können somit bis zu sieben Tage im Voraus hergestellt und für die Anwendung am Patienten bereit gehalten werden. Die Lösungen sollten dennoch gekühlt und unter Lichtschutz aufbewahrt werden, um den Abbau des Arzneistoffes und eine mikrobielle Kontamination zu minimieren.
Ziel der vorliegenden Arbeit war es, den Umfang der gastrointestinalen Absorption und Metabolisierung von mit der Nahrung aufgenommenen Polyphenolen in vivo zu ermitteln. Darüber hinaus sollte deren systemische Verfügbarkeit anhand von humanen Serum- und Urinproben bestimmt werden. Lebensmittel der Wahl war dabei Apfelsaft. Die Identifizierung und Strukturaufklärung der Polyphenole und ihrer Metabolite erfolgte mittels Hochleistungsflüssigchromatographie-Diodenarray-Detektion (HPLC-DAD), HPLC-Elektrospray-Tandemmassenspektrometrie (HPLC-ESI-MS/MS) sowie Kapillargaschromatographie-Massenspektrometrie (HRGC-MS). Quantitative Analysen wurden mittels HPLC-DAD durchgeführt; für die Bestimmung der Polyphenolgehalte in Urinproben sowie von D-(-)-Chinasäure wurde die HPLC-ESI-MS/MS im Single Reaction Monitoring (SRM) Modus eingesetzt. Zur Etablierung der Polyphenolanalytik und zur Auswahl eines für die Studien geeigneten Saftes wurden die Polyphenolprofile verschiedener Presssäfte aus Most- und Tafeläpfeln sowie kommerziell erhältlicher Apfelsäfte ausgewertet. Für die Säfte aus Tafeläpfeln wurden Polyphenolmengen zwischen 154 und 178 mg/L bestimmt, wohingegen die Säfte aus Mostäpfeln Gehalte zwischen 261 und 970 mg/L aufwiesen. Bei den Säften des Handels wiesen die naturtrüben Apfelsäfte mit 182 bis 459 mg/L höhere Polyphenolgehalte auf als die klaren Produkte (120 - 173 mg/L). Bei oraler Aufnahme kommen die Polyphenole zuerst mit Speichel in Kontakt. Umsetzungen mit zentrifugiertem Speichel führten zu keiner Modifikation der Substanzen. In Gegenwart von nativem Speichel wurden für die ß-glycosidisch gebundenen Flavonoidglycoside hydrolytische Abbaureaktionen in Abhängigkeit der Struktur ihres Zuckerrestes beobachtet. Nach Antibiotikumzugabe wurden deutlich geringere Abbauraten ermittelt. Die Hydrolyse erfolgt demnach hauptsächlich durch Enzyme der bakteriellen Mundflora. Im Weiteren gelangen die Polyphenole über die Speiseröhre in den stark sauren Magen. Zur Überprüfung ihrer Stabilität wurden die Apfelpolyphenole mit künstlichem Magensaft (pH 1,81) über vier Stunden inkubiert. Einzig für Procyanidin B2 wurde ein nahezu vollständiger Abbau nachgewiesen. Nach Passage des Magens erreichen die Polyphenole das neutrale bis leicht alkalische Duodenum. Die Inkubation erfolgte mit simuliertem Duodenalsekret (pH 7,2) über einen Zeitraum von 24 Stunden. Für 5-Kaffeoylchinasäure wurde eine 37%ige Abnahme beobachtet. Dabei wurden 3- und 4-Kaffeolychinasäure, Kaffeesäure, D-(-)-Chinasäure sowie Kaffeesäuremethylester generiert. Vergleichbare Ergebnisse wurden bei der Inkubation von 4-p-Cumaroylchinasäure erhalten. Kaffeesäure unterlag einer 26,3%igen Umsetzung zu Ferulasäure, Dihydrokaffeesäure und Kaffeesäuremethylester. Bei den monomeren Flavan-3-olen wurden mittels HPLC-Analytik an chiraler Phase Epimerisierungen nachgewiesen. Procyanidin B2 war nach vier Stunden nur noch in Spuren erfassbar. Quercetin wurde vollständig in Phloroglucin, 3,4-Dihydroxybenzoesäure und 2,4,6-Trihydroxybenzoesäure gespalten. Um die Verfügbarkeit der Polyphenole im Dickdarm zu untersuchen, wurde eine Interventionsstudie mit naturtrübem Apfelsaft bei Probanden mit einem Stoma des terminalen Ileums durchgeführt. Nach oraler Aufnahme von einem Liter Saft wurde der Ileostomaausfluss über einen Zeitraum von acht Stunden gesammelt. In den Ileostomabeuteln wurden zwischen Null und 33,1% der einzelnen aus dem Apfelsaft aufgenommenen phenolischen Substanzen wiedergefunden. Der ausgeschiedene Anteil der Flavonoidglycoside war dabei abhängig von der Struktur des jeweiligen Zuckerrestes. Als Metabolite waren D-(-)-Chinasäure, 1- und 3-Kaffeoylchinasäure, Phloretin und dessen 2´-O-Glucuronid sowie die Methylester der Kaffee- und p-Cumarsäure nachweisbar. Für die höhermolekularen Procyanidine wurden Wiederfindungen von 90,3% sowie deren partieller Abbau ermittelt. Die systemische Verfügbarkeit der Polyphenole sowie ihre renale Ausscheidung wurden in zwei weiteren Humanstudien mit gesunden Probanden untersucht. Nach Konsum von einem Liter naturtrüben Apfelsaft erfolgten Blutabnahmen über einen Zeitraum von acht Stunden; Urin wurde über einen Zeitraum von 24 Stunden untersucht. Die Bilanzierung der Apfelpolyphenole erfolgte sowohl vor als auch nach enzymatischer Hydrolyse. Kaffeesäure, 5-Kaffeoylchinasäure, 4-p-Cumaroylchinasäure, (-)-Epicatechin, Phloretin und Quercetin waren sowohl im Serum als auch im Urin detektierbar. Insgesamt wurden 5,3% (Serum) bzw. 23% (Urin) der mit dem Saft aufgenommenen phenolischen Verbindungen wiedergefunden. Davon waren im Urin 19,5% in Form hydroxylierter phenolischer Säuren nachweisbar.
Die Qualitätskontrolle von pharmazeutisch verwendeten Substanzen ist eine Voraussetzung für die sichere Anwendung von Arzneimitteln. Sie ist eng mit der Bestimmung der Verunreinigungen einer Substanz im Rahmen der Reinheitsanalytik verknüpft. Dabei spielt das Europäische Arzneibuch (Ph. Eur.) eine wichtige Rolle. Die in der vorliegenden Arbeit durchgeführten Untersuchungen zur Bestimmung des Verunreinigungsprofils waren auf die Neuerarbeitung oder Überarbeitung der im Ph. Eur. beschriebenen Prüfungen auf „Verwandte Substanzen“ ausgerichtet. Im Rahmen der Neuerarbeitung einer Monographie für Trimebutin und Trimebutin-Maleat wurde eine RP-HPLC-Methode entwickelt. Neben den bekannten Verunreinigungen war ein weiterer Peak nachweisbar, der N-Desmethyltrimebutin zugeordnet wurde. Die Trennung zwischen N-Desmethyltrimebutin und dem Hauptpeak sowie zwischen zwei bekannten Verunreinigungen ist kritisch. Für beide Peakpaare wurden Systemeignungskriterien festgelegt. Zur Definition von Akzeptanzkriterien in den erarbeiteten Monographieentwürfen wurden Chargen untersucht. Die Quantifizierung erfolgte über die „Externer-Standard“-Methode mit einer Verdünnung der Untersuchungslösung als Referenz. Falls erforderlich, wurden die Korrekturfaktoren in die Berechnung des Gehaltes einbezogen. Die DC-Methode zur Prüfung auf „Verwandte Substanzen“ von Adenosin sollte gegen eine HPLC-Methode ausgetauscht werden. In Übereinstimmung mit Ergebnissen des EDQM-Labors haben die Untersuchungen bestätigt, dass mit einer Ionenpaar-HPLC-Methode die Anwesenheit von Inosin, Guanosin, Uridin und Adenin in Adenosin kontrolliert werden kann. Durch die Festlegung einer Auflösung > 1.5 zwischen Adenin und Inosin als Systemeignungskriterium werden nicht geeignete HPLC-Säulen erkannt. Durch die DC-Prüfung des Ph. Eur. können verschiedene Nucleotide nachgewiesen werden. Die vorgeschlagene HPLC-Methode wurde durch Einführung eines Gradienten so geändert, dass Nucleotide, Nucleoside und Adenin gleichzeitig nachgewiesen werden konnten. Die Analyse der Proben bestätigte die Ergebnisse der DC, dass kleine Mengen Adenosin-5’-monophosphat in den Chargen vorhanden waren. Eine CE-Methode zur Reinheitsprüfung von Glutathion wurde entsprechend der Kommentare zum in Pharmeuropa veröffentlichten Monographievorschlag überarbeitet. Die kritischen Trennungen zwischen dem internen Standard und Cystein sowie zwischen L-γ-Glutamyl-L-cystein und dem Hauptpeak, die durch den Systemeignungstest überprüft werden, waren durch den pH-Wert des Trennpuffers kontrollierbar. Glutathion zeigt beispielhaft, dass das Verunreinigungsprofil fermentativ gewonnener Produkte komplex ist und von den Herstellungs- und Aufreinigungsprozessen abhängt. Gleiches gilt für Aminosäuren, die vermehrt biotechnologisch gewonnen werden. In den Aminosäure-Monographien ist zur Reinheitsprüfung eine DC auf „Ninhydrin-positive Substanzen“ vorgeschrieben. Diese Methode ist auf den Nachweis anderer Aminosäuren, die durch unvollständige Abtrennung bei der Extraktion aus Proteinhydrolysaten stammen können, ausgelegt. Die Analyse von Aminosäuren mittels CE nach Derivatisierung mit FMOC-Cl ermöglicht einen sensitiven und selektiven Nachweis anderer Aminosäuren. Durch den Einsatz von CBQCA als Derivatisierungsreagenz können auch Aminozucker und kleine Peptide erfasst werden. Mit beiden Methoden wurde das Verunreinigungsprofil von Histidin, Isoleucin, Phenylalanin und Serin bestimmt. Während in den Phe- und Ser-Proben keine Verunreinigungen erfasst wurden, wurden in den Ile-Proben nach Derivatisierung mit FMOC-Cl andere Aminosäuren gefunden. Alle untersuchten Aminosäuren zeigten nach Derivatisierung mit CBQCA viele Verunreinigungen. Wegen Peaküberlagerungen konnten Aminosäuren mit dem verwendeten Trennpuffer (25 mM Boratpuffer pH 9.20; 25 mM SDS) nicht bestimmt werden. Durch eine Variation des Puffers (20 mM Tetraboratpuffer pH 9.3; 100 mM SDS) war es möglich, die CBQCA-derivatisierten Aminosäuren zu trennen und zuzuordnen. Im Hinblick auf die Anwesenheit anderer Aminosäuren waren die Ergebnisse der beiden Verfahren vergleichbar. Insbesondere wurden in den Ile-, Phe- und Ser-Proben keine basischen Aminosäuren sowie Cystein gefunden. Deren FMOC-Derivate comigrierten mit einem Peak, der nach Strukturaufklärung mittels NMR-Spektroskopie als Nebenprodukt der Derivatisierungsreaktion mit FMOC-Cl identifiziert wurde. Als Verunreinigungen von biotechnologisch hergestellten Aminosäuren kommen organische Säuren in Frage. Durch eine RP-HPLC unter Zusatz von Heptafluorbuttersäure als Ionenpaarreagenz wurden Aminosäuren und organische Säuren getrennt. Die Detektion erfolgte mittels ELSD. Nach dem Hauptpeak wurden Störsignale detektiert, weshalb sich die Anwendung der Methode zur Reinheitsprüfung als schwierig herausstellte. Die durchgeführten Experimente deuten darauf hin, dass der ELSD mit der großen Substanzmenge überlastet ist und es zur Verschleppung von Substanz kommt.
The requirements for the impurity profiling of substances for pharmaceutical use have become greater over time. They can be accomplished by the use of modern instrumental analysis techniques, which have been evolved in the last decades. New types of columns with HILIC, mixed-mode and chiral stationary phases are suitable for the separation of all kinds of substances mixtures, that were previously hardly possible with the use of common reversed phase columns. Modern, almost universal detectors like CAD, ELSD and CNLSD can be applied for a sensitive detection of substances without a chromophore. However, in addition to some small individual disadvantages to these methods, the costs are high and applications are still kind of rare. Thus, the introduction of these devices at a broader level has not yet taken place. While this presumably will change over time, there is a need for methods that enable the impurity profiling of challenging substances with widespread analytics devices.
Methionine is a substance with hydrophobic and hydrophilic impurities. With the help of a mixed-mode stationary phase, which is a combination of a reversed phase and a strong cationic exchanger, the separation of all putative impurities was found possible with good sensitivity and selectivity. The method requires apart from the column only standard isocratic HPLC equipment and was successfully validated.
The evaluation of the enantiomeric purity of amino acids is challenging. Two approaches were made. The first method utilizes CE by means of in-capillary derivation with OPA and the subsequent separation with a cyclodextrin. With the use of OPA/NAC and γ-cyclodextrin, a simple and cost-effective method for the indirect enantioseparation of 16 amino acids was developed. With the second approach, racemic amino acids can be analyzed with HPLC and in-needle derivatization. For this, different columns and chiral thiols were evaluated and the chromatographic parameters were optimized. A method with OPA/NIBLC, a pentafluorophenyl column made the enantioseparation of 17 amino acids feasible. A LOQ of the minor enantiomer down to 0.04 % can be achieved with UV spectrophotometric detection. A similar method was developed for impurity profiling of L-amino acids. This can be used alternatively for the amino acid analysis performed by the European Pharmacopoeia.
A simple, robust, precise and accurate method for the evaluation of impurities in glyceryl trinitrate solution was developed and validated. The four impurities of glyceryl trinitrate are separated by means of an acetonitrile-water gradient and the assay for this substance is also possible.
All presented studies aimed on the improvement of the quality analysis of already monographed drugs. Thereby different LC methods were applied and coupled to i.e., the UV/VIS detector, the CAD or a hyphenation of these detectors, respectively. The choice of the chromatographic system including the detector was largely dependent on the physicochemical properties of the respective analytes.
With the risk-assessment report on the API cetirizine we presented an exemplary tool, that can help to minimize the risk of the occurrence of unexpected impurities. An in- deep analysis of each step within synthesis pathway by means of reaction matrices of all compounds was performed. It is essential to understand the complete impurity profile of all reactants, solvents, and catalysts and to include them in the matrix. Finally, the API of this synthesis was checked if all impurities are identified by this tool. Of note, a shortcoming of such a targeted approach is that impurities can still occur, but they are not captured. This disadvantage can be partially compensated by non-targeted approaches if they are performed in parallel with the other studies that represent most of the impurities. However, this work also shows that even in a supposedly simple synthesis, potentially hundreds of by-products can be formed. For each of them, it must be decided individually whether their formation is probable or how their quantity can be minimized in order to obtain APIs, that are as pure as possible.
In the dapsone project it was aimed to replace the existing old Ph. Eur. TLC method with a modern RP-HPLC method. This was successful and since Ph. Eur. 10.6, the method developed in this work, became a valid monograph. Within the revision process of the monograph, the individual limits for impurities were tightened. However, this new method needs HPLC instrumentation, suitable to perform gradients. As this is not always available in all control laboratories, we also developed an alternative, more simple method using two different isocratic runs for the impurity analysis. The obtained batch results of both, the new pharmacopoeial method and the more simple one, were in a comparable order of magnitude. Furthermore, within the method development stage of the Ph. Eur. method, we could identify one unknown impurity of the impurity reference by high-resolution MS/MS analysis.
Also, in the baclofen project it was aimed to replace the existing Ph. Eur. method with the introduction of an additional impurity to be quantified. A corresponding method was developed and validated. However, due to the harmonization process of the pharmacopoeias, it is currently not used. In addition, we tried to find further, non- 116
SUMMARY
chromophoric impurities by means of the CAD. However, except for one counterion of an impurity, no further impurities were found. Also, the aforementioned new impurity could not be detected above the reporting threshold in the batches analyzed. As the only individually specified impurity A is also present at a low level, it can be concluded that the examined batches of baclofen are very pure.
The use of universal detectors, such as the CAD can be particularly interesting for compounds with no chromophore or those with only a weak chromophore. Therefore, we decided to take a closer look at the impurity profile of acarbose. Currently, acarbose and its impurities are being studied by low wavelength UV detection at 210 nm. Therefore, the question arose whether there are no other impurities in the API that do not show absorption at this wavelength. CAD, which offers consistent detection properties for all non-volatile compounds, is ideally suited for this purpose. However, it was not so easy to use the CAD together with the UV detector, for example, as a hyphenated detection technique, because the Ph. Eur. method uses phosphate buffers. However, this is non-volatile and therefore inappropriate for the CAD. Therefore, an attempt was made to replace the buffer with a volatile one. However, since this did not lead to satisfactory results and rather the self-degradation process of the stationary phase used could be observed by means of the CAD, it was decided to switch to alternative stationary phases. A column screening also revealed further difficulties with acarbose and its impurities: they show an epimerization reaction at the end of the sugar chain. However, since one wanted to have uniform peaks in the corresponding chromatograms, one had to accelerate this reaction significantly to obtain only one peak for each component. This was best achieved by using two stationary phases: PGC and Amide-HILIC. Impurity-profiling methods could be developed on each of the two phases. In addition, as expected, new impurities could be detected, albeit at a low level. Two of them could even be identified by spiking experiments as the sugar fragments maltose and maltotriose.
Taken together, it can be concluded, that this work has contributed significantly to the improvement of the quality analysis of monographed drugs. In addition to the presented general tool for the identification of potential impurities, one of the methods developed, had already been implemented to the Ph. Eur. In an effort to improve the CAD's universal detection capabilities, additional methods have also been developed. Further, new improved methods for the impurity profiling are ready to use.
The charged aerosol detector (CAD) is an aerosol-based detector employed in liquid chromatography which has become established in the field of pharmaceutical analysis due to its outstanding performance characteristics, e.g. the almost uniform response for nonvolatile analytes. Owing to its principle of detection, the response of the CAD depends on the volatility of a compound and is inherently nonlinear. However, the newly implemented instrumental settings evaporation temperature and power function value (PFV) are valuable tools to overcome some of these drawbacks and can even enhance the detector’s capabilities when adjusted properly.
This thesis aimed to evaluate the impact of the new instrumental settings on the CAD performance. Additionally, the influence of modern separation techniques for small polar compounds on the CAD was assessed and the applicability of hyphenated UV-CAD techniques explored. The optimization strategies derived from the evaluation procedures and the conjunction of the instrumental and chromatographic techniques investigated were utilized for the challenging impurity profiling of amino acids and amino acid-like drugs.
The results of the method validation procedures confirmed the broad applicability of the CAD in the pharmaceutical analysis of nonvolatile compounds, supported by satisfactory sensitivity and reproducibility for meeting the regulatory requirements with respect to the ICH guidelines Q2(R1) and Q3A(R2). The limits of applicability include the analysis of semivolatile compounds, and the method transfer between current and legacy CAD models. Further advances in the definition and standardization of allowed ranges for the instrumental settings and the establishment of general optimization procedures in the method development could lead to a more widespread use of the detection technique in compendial methods.
Assay and impurity profiling of the pharmaceuticals are the key routine quality control methods employed worldwide for which High Performance Liquid Chromatography (HPLC) is the most widely used technique. The ability to carry out these routine laboratory procedures in low- and middle- income countries (LMICs) need the methods to be based upon simple instruments manageable with moderate levels of personnel skill and costs involved.
Simple, convenient, and cost effective reverse phase HPLC methods were developed using phosphate buffer and methanol as mobile phase with C18 column as stationary phase for the impurity profiling and assay of beta lactam antibiotics. Isocratic elution and UV detection was employed in these methods. Impurity profiling method was developed for coamoxiclav tablets and ceftriaxone bulk drug. The method for ceftriaxone included a supplementary method to quantify one of its known impurity (Impurity D of ceftriaxone). This method involved use of acetonitrile where as the two main methods were achieved on the targeted method design, described above. With the exception of impurity A of ceftriaxone, the methods developed can successfully quantify impurities to the concentration as low as ≤0.05%, which is in accordance with the current guidelines for the impurity profiling of antibiotics issued by European Medicines Agency.
As ensuring cost reduction was one of the key objectives of carrying out the method development exercise, in situ methods for the preparation of impurities were also identified and some new methods were introduced. The stability of beta lactam antibiotics and the choice of solvent were given due attention during the process of method development revealing information on the presence of new impurities. Deacetyl cefotaxime and 2-mercaptobenzathiazole were identified in this process as new impurities of ceftriaxone currently not listed under known impurities by United States Pharmacopoeia and European Pharmacopoeia. However, deacetyl cefotaxime is a known impurity of cefotaxime whereas the latter molecule is a degradation product of one of the synthesis impurities of ceftriaxone. This substance is reported to be carcinogenic and is resolved using the supplementary method developed for ceftriaxone, hence making its detection and quantification possible. A known inactive impurity of ceftriaxone (Impurity A, E-isomer of ceftriaxone) was` also shown to be produced by exposure to day light, thus warranting the light protection of the ceftriaxone solution, an information that is of critical importance in the clinical settings.
A series of experimentation was carried out on the finished products of beta lactam antibiotics sampled from Pakistan and few other countries, to identify key quality issues in the samples. Though the limited sample size and convenient sampling did not provide results that could yield a decisive figure for the country status for prevalence of substandard and falsified medical products, but the experiments have clearly indicated that the problems in drug quality do exist and beta lactam antibiotics form a class of high-risk medicine with respect to surveillance for poor-quality medicines. Isolation of unknown impurities was also carried out along with the introduction of new and modified methods for preparation of impurities of beta-lactam antibiotics.
In addition, detailed literature survey was carried out for understanding the complex problem of the poor-quality medicine, impact of poor quality antimicrobials on health care system and the magnitude of the problem at the global level. The country status of Pakistan regarding quality of medicines was recorded based upon the available documentary evidence. The current technologies and strategic options available for low- and middle-income countries in aiding fight for combating poor quality medicines was also laid down to design recommendations for Pakistan. A comprehensive review of the information technology tools used for identification and control of substandard and falsified medicines was also conducted.