Refine
Has Fulltext
- yes (153)
Is part of the Bibliography
- yes (153) (remove)
Year of publication
Document Type
- Journal article (82)
- Doctoral Thesis (70)
- Preprint (1)
Keywords
- melt electrowriting (13)
- 3D printing (12)
- Knochenzement (12)
- additive manufacturing (10)
- biofabrication (9)
- 3D-Druck (8)
- Hydrogel (7)
- Magnesiumphosphate (7)
- hyaluronic acid (7)
- melt electrospinning writing (7)
- Calciumphosphat (6)
- bioprinting (6)
- Tissue Engineering (5)
- bioink (5)
- polycaprolactone (5)
- tissue engineering (5)
- Biomaterial (4)
- Calciumphosphate (4)
- Knochenkleber (4)
- Knochenzemente (4)
- Polymere (4)
- Struvit (4)
- bone (4)
- bone adhesive (4)
- bone cement (4)
- hydrogel (4)
- hydrogels (4)
- magnesium phosphate cement (4)
- scaffold (4)
- thiol-ene (4)
- Beschichtung (3)
- Biofabrication (3)
- Knochenersatz (3)
- Nanopartikel (3)
- Scaffold (3)
- biomaterials (3)
- breast cancer (3)
- calcium phosphate (3)
- calcium phosphate cement (3)
- chondrogenic differentiation (3)
- electrohydrodynamics (3)
- extracellular matrix (3)
- melt electrowriting (MEW) (3)
- phytic acid (3)
- 3D Bioprinting (2)
- 3D powder printing (2)
- Biodruck (2)
- Biofabrikation (2)
- Calciumhydroxid (2)
- Cement (2)
- Dihydrooxazole (2)
- Electrospinning (2)
- Fluorescence Microscopy (2)
- Gefrierstrukturierung (2)
- Gelatine (2)
- Gerichtete Erstarrung (2)
- Implantat (2)
- Injectability (2)
- Isocyanate (2)
- Knochenersatzmaterial (2)
- MSC (2)
- Makrophagen (2)
- Melt Electrowriting (2)
- Melt electrowriting (2)
- Newberyit (2)
- Oberflächenfunktionalisierung (2)
- Polyethylenglykole (2)
- Polyoxazoline (2)
- Ringöffnungspolymerisation (2)
- Tissue engineering (2)
- Wirkstofffreisetzung (2)
- Zement (2)
- Zementpaste (2)
- angiogenesis (2)
- antibakteriell (2)
- arteriovenous loop (2)
- baghdadite (2)
- biocompatibility (2)
- cartilage (2)
- cement (2)
- cortical neurons (2)
- dual setting (2)
- dual setting system (2)
- dual-stage crosslinking (2)
- electrohydrodynamic (2)
- in vitro (2)
- inflammation (2)
- mechanical properties (2)
- polymer processing (2)
- polymer-peptide-conjugate (2)
- premixed (2)
- printability (2)
- rheology (2)
- shape fidelity (2)
- therapy (2)
- (AB)\(_{n}\) segmented copolymers (1)
- 2-Aminoethylphosphonic acid (1)
- 316L stainless-steel (1)
- 3D (1)
- 3D Printing (1)
- 3D Pulverdruck (1)
- 3D cultures (1)
- 3D electrophysiology (1)
- 3D microfiber (1)
- 3D model systems (1)
- 3D neuronal networks (1)
- 3D scaffolds (1)
- 3D tumor model (1)
- 3D-Biodruck (1)
- 3d printing (1)
- ACPC (1)
- ALI culture (1)
- Abbindeverhalten (1)
- Additive Fertigung (1)
- Adenovirus (1)
- Adhäsion (1)
- Adipose Tissue (1)
- Alginate-Gelatine (1)
- Amelogenese (1)
- Anisotropic structures (1)
- Antibiotikafreisetzung (1)
- Antibiotikum (1)
- Arteriosklerose (1)
- Artery Models (1)
- Aspergillose (1)
- Aspergillosis (1)
- Atherosclerosis (1)
- Auflösung (1)
- Baghdadit (1)
- Baghdadite (1)
- Beschichtung von Titandioxid-Nanopartikeln (1)
- Biofabrication of hydrogels (1)
- Biofilm (1)
- Bioharz (1)
- Bioink (1)
- Biokeramik (1)
- Biologischer Abbau (1)
- Bioprinting (1)
- Bioresorption (1)
- Biotinte (1)
- Biozement (1)
- Blockcopolymere (1)
- Bone Cement (1)
- Bone marrow (1)
- Bone-replacement (1)
- Boolesches Netz (1)
- Breast cancer (1)
- Bruschitbeschichtung (1)
- Brustkrebs (1)
- Ca\(^{2+}\)-Imaging (1)
- Calcium Phosphate (1)
- Calcium phosphate (1)
- Calcium phosphate-based biomaterials (1)
- Calcium-Magnesium-Phosphat-Zemente (1)
- Calcium-Magnesium-Phosphates-Cements (1)
- Calciummagnesiumphosphat (1)
- Calciummagnesiumphosphat-Keramik (1)
- Calciumphosphatzemente (1)
- Cartilage (1)
- Cell Sheet Engineering (1)
- Cell adhesion (1)
- Cement Paste (1)
- Ceramic polymer composite (1)
- Chelatbildner (1)
- Chemical modification of biopolymers (1)
- Chondrogenesis (1)
- Chondrogenic differentiation (1)
- Chondrozyten (1)
- Co-Kultur (1)
- Colloidal Stability (1)
- Correlative microscopy (1)
- DLP-SLA (1)
- Dectin-1 (1)
- Degradation (1)
- Druckbarkeit (1)
- Dual setting system (1)
- Dual-setting (1)
- ECM (1)
- Elektrochemische Abscheidung (1)
- Elektrospinnen (1)
- Elektrostatisches Verspinnen (1)
- Endodontie (1)
- Endoprothese (1)
- Extrazelluläre Matrix (1)
- Extrazellulärmatrix (1)
- Fettgewebe (1)
- Fibrin (1)
- Fibroblast (1)
- Fibroblasten (1)
- FluidFM (1)
- FluidFM technology (1)
- Fluoreszenzmarkierung (1)
- Freeze-Structuring (1)
- Freezing (1)
- Functional hydrophilic polymers (1)
- Funktionalisierung <Chemie> (1)
- Funktionalisierung von elektrogesponnenen Fasern (1)
- Funktionswerkstoff (1)
- Galvanische Abscheidung (1)
- GelAGE (1)
- GelMA (1)
- Gene therapy (1)
- Genregulation (1)
- Gewebe (1)
- Geweberegeneration (1)
- Glycidol (1)
- Gold-Nanoparticles (1)
- Granulat (1)
- Granulate (1)
- Granules (1)
- HA modifiedCNF membranes (1)
- HASH (1)
- HEMA (1)
- Hemodynamics (1)
- Hyaluronic Acid (1)
- Hyaluronsäure (1)
- Hydroxylapatit (1)
- Hypertrophy (1)
- Hämodynamik (1)
- IP6 (1)
- Implantatwerkstoff (1)
- In vitro model (1)
- In vivo (1)
- Inhibition (1)
- Injizierbarkeit (1)
- Iron Oxide Nanoparticles (1)
- Janus fibers (1)
- Klebstoff (1)
- Knochen (1)
- Knochenbruch (1)
- Knochenwachs (1)
- Knorpel (1)
- Konjugate (1)
- Korrelative Mikroskopie (1)
- Kupfer (1)
- L929 (1)
- Lactobacillus acidophilus (1)
- Laktobazillen (1)
- MPI (1)
- MPS (1)
- MRI (1)
- Macrophage extracellular traps (1)
- Magnesiumoxid (1)
- Magnesiumphosphat (1)
- Magnesiumphosphatschäume (1)
- Mechanische Aktivierung (1)
- Melt electrospinning (1)
- Mesenchymal stem cell (1)
- Mesenchymale Stromazellen (1)
- Mikrofluidik (1)
- Mikrotumormodell (1)
- Milchsäure (1)
- Milchsäurebakterien (1)
- Modification (1)
- Modifikation (1)
- Modifikation von Biokeramiken (1)
- Morphology (1)
- Multifunctionalisability (1)
- NANOG (1)
- NCO-sP(EO-stat-PO) (1)
- NLRP3 (1)
- Nahtmaterial (1)
- Nanofaser (1)
- Nanogels (1)
- Nanohydrogel (1)
- Nanoparticle Tracking Analysis (1)
- Nanoparticles (1)
- Nanopartikelcharakterisierung (1)
- Nanoröhre (1)
- Nanotubular coatings (1)
- Nanotubuläre Beschichtungen (1)
- Normal breast (1)
- Orale Chirurgie, (1)
- Osteoblast (1)
- Osteochondrales Gewebe (1)
- Osteoklast (1)
- Osteoklastendifferenzierung (1)
- Oxygen diffusion hardening (1)
- PCL (1)
- PEG (1)
- PLGA (1)
- PTEN (1)
- PVD Beschichtung (1)
- PVD coatings (1)
- PVD-Verfahren (1)
- Paste (1)
- Pharmaceutics (1)
- Phosphoserin (1)
- Photopolymerisation (1)
- Poly(2-oxazoline) (1)
- Poly(glycidol)s (1)
- Polyacrylsäure (1)
- Polyacrylsäuren (1)
- Polycaprolacton (1)
- Polyglycidol (1)
- Polylactid-co-Glycolid (1)
- Polymer-Gel (1)
- Polymer-peptide-conjugate (1)
- Polymergehalt (1)
- Polymers (1)
- Polymilchsäure (1)
- Polyoxazolines (1)
- Primary cell lines (1)
- QCM (1)
- RAFT (1)
- RHO (1)
- ROCK (1)
- Rapid Prototyping <Fertigung> (1)
- Regeneration (1)
- Reißfestigkeit (1)
- Rheologie (1)
- Rheology (1)
- S.aureus (1)
- SOX9 (1)
- Sauerstoffdiffusionshärtung (1)
- Scaffold <Tissue Engineering> (1)
- Schiff base chemistry (1)
- Schleuderguss (1)
- Setting Control (1)
- Silber (1)
- Silberdotierung (1)
- Silica precursor (1)
- Sol-gel (1)
- Stanfieldit (1)
- Staphylococcus aureus / drug effects (1)
- Star-shaped poly(ethylene glycol) (1)
- Stem cells plasticity (1)
- Sternpolymere (1)
- Strontium (1)
- Tantal (1)
- Therapeutisches System (1)
- Thermoresponsive Polymere (1)
- Thioether-Poly(glycidol) (1)
- Ti(Ag) Beschichtungen (1)
- Ti(Ag) coatings (1)
- Tierversuch (1)
- Titan (1)
- Titandioxid (1)
- Titanimplantat (1)
- Tricalciumphosphatkeramik (1)
- Tumormicroenvironment (1)
- Tumorstammzellen (1)
- UV-VIS-Spektroskopie (1)
- Unidirectional Freezing (1)
- Universität Würzburg. Lehrstuhl für Bioinformatik (1)
- Vancomycin / administration & dosage (1)
- Vancomycin / chemistry (1)
- Vancomycin / pharmacology (1)
- Vascularization (1)
- Vaskularisation (1)
- Verbundwerkstoff (1)
- Vereinzelung von Partikeln (1)
- Volumetrischer Biodruck (1)
- WST test (1)
- Wasserlösliche Polymere (1)
- Wirkstoff-Träger-System (1)
- Wundinfektion (1)
- Wundnaht (1)
- Zahnentwicklung (1)
- Zahnimplantat (1)
- Zahnmedizin (1)
- Zetapotential (1)
- Zink (1)
- acrylate-endcapped urethane-based polymer (AUP) (1)
- actin (1)
- acute myeloid leukaemia (1)
- adhesion dynamics (1)
- adhesive (1)
- adipose tissue (1)
- adipose-derived stromal cells (1)
- agarose (1)
- alginate (1)
- alveolar‐capillary barrier (1)
- amoeboid cell migration (1)
- animal model (1)
- anisotropic porous structures (1)
- anti-bacterial agents / administration & dosage (1)
- anti-bacterial agents / chemistry (1)
- anti-bacterial agents / pharmacology (1)
- antibacterial (1)
- antiinflammatorisch (1)
- arthritis (1)
- artificial bones (1)
- astrocytes (1)
- atomic force microscopy (1)
- axial vascularization (1)
- azlactone (1)
- balloon kyphoplasty (1)
- bending strength (1)
- bio-printability (1)
- bioceramic (1)
- bioceramics (1)
- biocompatible Materials (1)
- biodegradable polymer (1)
- biodegradable polymers (1)
- biofabricated vascular graft (1)
- biofunctional coating (1)
- bioinorganic (1)
- bioinspired interface (1)
- bioinspired membrane (1)
- biological models (1)
- biomaterial ink (1)
- biomechanical evaluation (1)
- biomechanics (1)
- biomedical materials (1)
- biophysics (1)
- biosensor (1)
- biosensors (1)
- blood-plasma (1)
- bohrbar (1)
- bone and cartilage tissue engineering (1)
- bone critical size defect (1)
- bone glue (1)
- bone graft substitutes (1)
- bone wax (1)
- bone wires (1)
- brain cancer (1)
- breast cancer model (1)
- brushite cement (1)
- brushite coating (1)
- calcaneus (1)
- calcium phosphate cements (1)
- calcium-phosphate (1)
- calciumhydroxide (1)
- carbon fiber reinforcement (1)
- cardiovascular pharmacology (1)
- cartilage repair (1)
- cell coagulation (1)
- cell counting (1)
- cell elongation (1)
- cell guidance (1)
- cell migration (1)
- cell morphology (1)
- cell printing (1)
- cell self-assembled monolayers (1)
- cell transplantation (1)
- cell viability (1)
- cement paste (1)
- cements (1)
- centrifugally casting (1)
- ceramic polymer composite (1)
- ceramics (1)
- chemical crosslinking (1)
- chemokines (1)
- chemoselective (1)
- chemosensitivity (1)
- chondrocyte (1)
- chondrocytes (1)
- chondroprogenitors (1)
- click chemistry (1)
- co-culture (1)
- coating (1)
- coatings (1)
- cochlea (1)
- collagen (1)
- collagen sponge (1)
- combination of physical vapor deposition and electrochemical etching (1)
- composite material (1)
- compressive strength (1)
- connective tissue (1)
- copper (1)
- crosslinked coating (1)
- cryostructured scaffolds (1)
- cyclic mechanical stretch (1)
- cyclic stretch (1)
- cyclic testing (1)
- cyto-compatibility (1)
- cytotoxicity (1)
- damage tolerant cement (1)
- deafness (1)
- defects (1)
- defined humanized test system (1)
- definition (1)
- degradable bone substitutes (1)
- degradable implant (1)
- degradation (1)
- detachment force quantification (1)
- dicalcium phosphate cement (1)
- differentation (1)
- digitization (1)
- dihydrate cement (1)
- directional solidification (1)
- disease models (1)
- drillable (1)
- drillable bone cement (1)
- drop on demand (1)
- drug delivery (1)
- drug liberation (1)
- drug release (1)
- dual abbindend (1)
- durotaxis (1)
- electroactive (1)
- electroactive polymers (1)
- electrochemical deposition (1)
- electrochemically surface coating (1)
- electron microscopy (1)
- electrospinning (1)
- electrospun fibers (1)
- elektrochemische Oberflächenbeschichtung (1)
- eletrhydrodynamic (1)
- embedded templating (1)
- endothelial progenitor cells (1)
- expression (1)
- extrusion of hiMPC-containing bioinks alginate + collagen type I (1)
- extrusion-based 3D printing (1)
- factor-I (1)
- farringtonite (1)
- fiber (1)
- fiber reinforcement (1)
- fibers (1)
- fiber–matrix interaction (1)
- fixation (1)
- focal adhesions (1)
- force (1)
- fracture (1)
- free radical polymerization (1)
- functionalization (1)
- funktionale Präpolymere (1)
- gels (1)
- genregulatorisches Netzwerk (1)
- gentamicin-loaded poly (methyl methacrylate) bone cement (1)
- granules (1)
- growth (1)
- guided bone regeneration (1)
- heart-failure (1)
- hemocompatibility (1)
- heterotypic scaffold design (1)
- human iPSC-derived mesodermal cells (hiMPCs) (1)
- human macrophages (1)
- human neutrophil elastase (HNE) (1)
- hybrid fabrication (1)
- hybrid materials (1)
- hybrid polymers (1)
- hydraulic reactivity (1)
- hydrogel formation (1)
- hydrophilic polymers (1)
- hydroxyapatite (1)
- hypoxia (1)
- imaging agents (1)
- immunomodulation (1)
- implant (1)
- implants (1)
- in vitro cell‐stretch model (1)
- in-vitro-Modell (1)
- in-vivo Micro-Computed Tomography (1)
- inflammatory response (1)
- injectability (1)
- injectable paste (1)
- injizierbare Paste (1)
- inner ear (1)
- inositol hexaphosphate (1)
- intercellular adhesion (1)
- interface control (1)
- iron release (1)
- lectin (1)
- left-ventricular function (1)
- load to failure testing (1)
- local drug delivery (1)
- lung cell model (1)
- macrophage polarization (1)
- macrophages (1)
- magnesium phosphate (1)
- magnetic properties (1)
- magnetoactive materials (1)
- materials testing (1)
- mature cell-cell contacts (1)
- mechanical activation (1)
- mechanical performance (1)
- mechanical reinforcement (1)
- mechanische Eigenschaften (1)
- medical device (1)
- medical-grade poly(ε-caprolactone) (1)
- medicine (1)
- melanoma (1)
- melt electrowriting (1)
- melt electrofibrillation (1)
- melt electrospinning (1)
- mesenchymal stem cells (1)
- mesenchymale Stromazellen (1)
- microfibers (1)
- microfibres (1)
- microfluidics (1)
- microstructures (1)
- microvasculature (1)
- migration (1)
- minipig (1)
- modelling (1)
- morphology controls (1)
- mucin (1)
- multilayered vessel wall with intimate, media and adventitia (1)
- nanofibers (1)
- nanostructures (1)
- nanotopographical surfaces (1)
- native chemical ligation (1)
- networks (1)
- neurite growth (1)
- organ-on-a-chip (1)
- organoids (1)
- organophosphates (1)
- osseointegration (1)
- osteoblasts (1)
- osteochondral defect (1)
- osteoporosis (1)
- oxidation (1)
- particle study (1)
- peptide conjugation (1)
- peptide immobilization (1)
- periprosthetic infection (1)
- periprothetische Infektion (1)
- phase conversion (1)
- photo-crosslinking (1)
- photopolymerization (1)
- physicochemical characterization (1)
- plasticizers (1)
- platelet-adhesion (1)
- poly(2-ethyl-2-oxazoline) (1)
- poly(2-oxazoline)s (1)
- poly(ethylene glycol) (1)
- poly(glycidol) (1)
- poly(lactic-co-glycolic acid) (1)
- poly(lactide-co-glycolide) (1)
- polyacrylic acid (1)
- polyethylene glycol (1)
- polyethylenglykole (1)
- polyglycidol (1)
- polylactid (1)
- polymer (1)
- polymer-analogue functionalization (1)
- polymeric matrix (1)
- polymers (1)
- polyoxazoline (1)
- polyoxazolines (1)
- porosity (1)
- postsurgical adhesion (1)
- pre-crosslinking (1)
- premixed paste (1)
- primary vascular smooth muscle‐like cells (vSMCs) (1)
- proliferation (1)
- proosseointegrativ (1)
- properties (1)
- prostheses and implants (1)
- protein adsorption (1)
- präfabriziert (1)
- präfabrizierte Paste (1)
- radiopacity (1)
- rat model (1)
- recruitment (1)
- remodelling (1)
- repair (1)
- rhBMP–2 (1)
- ring opening polymerisation (1)
- ring-opening polymerization (1)
- sPEG (1)
- sacrificial printing (1)
- sanders (1)
- scaffolds (1)
- screw (1)
- self-assembled monolayers (1)
- serial block face EM (1)
- setting reaction (1)
- shear stress (1)
- shear thinning (1)
- silicones (1)
- silver doped titanium dioxide nanoparticles (1)
- sodium alginate (1)
- solution electrospinning (1)
- spherical granules (1)
- spheroids (1)
- sphärische Granulate (1)
- spinning (1)
- stanfieldite (1)
- starPEG (1)
- starPEG hydrogel (1)
- stem cells (1)
- stimulation (1)
- stress (1)
- strontiumdotierte Struvitschichten (1)
- subcutaneous implanation (1)
- sugar glass printing (1)
- surface coating (1)
- surface functionalisation (1)
- surface functionalization (1)
- surfaces (1)
- sutures (1)
- synbones (1)
- synergistic reinforcement (1)
- synthetic hydrogels (1)
- systematic investigations (1)
- tension (1)
- testing (1)
- testing methods (1)
- tethering (1)
- thermoresponsive hydrogel (1)
- tibial head depression fracture (1)
- tissue morphogenesis (1)
- tissue regeneration (1)
- titanium implant (1)
- topotaxis (1)
- total joint arthroplasty (1)
- total knee arthroplasty (1)
- traction (1)
- tranexamic acid (1)
- transforming growth factor-beta 1 (1)
- transplantation (1)
- tricalcium phosphate (1)
- tubular constructs (1)
- tumor heterogeneity (1)
- tunable ultra‐thin biphasic membrane (1)
- unidirectional freezing (1)
- vascular biofabrication (1)
- vascular network and hierarchical organized vessels (1)
- vorgemischt (1)
- x-ray micro computed tomography (1)
- zetapotential (1)
- zinc (1)
- zonal (1)
- zonal construct (1)
- α-tricalcium phosphate (1)
- α‑Tricalciumphosphat (1)
Institute
- Abteilung für Funktionswerkstoffe der Medizin und der Zahnheilkunde (153) (remove)
Sonstige beteiligte Institutionen
Ziel dieser Arbeit war die Herstellung fluoreszent markierter Präpolymere sowie deren Optimierung, die kontrollierte und reproduzierbare Synthese von redox-sensitiven und nicht redox-sensitiven NG mit und ohne Fluoreszenzmarkierung in einem durchschnittlichen Partikelgrößenbereich von 150 – 300 nm und mit einer Konzentration > 10*10 Partikel/ml, die Charakterisierung der NG, ihre Untersuchung bezüglich ihrer Stabilität und des Assoziationsverhaltens zu BSA sowie die Erlangung von Erkenntnissen bezüglich des Aufnahmemechanismus der NG in Abhängigkeit vom Transportpeptid Tat.
Abschließend kann zusammenfassend gesagt werden:
1. Das große Potential von PG-basierten NG für biologische bzw. medizinische Einsatzgebiete konnte weiter untermauert werden.
2. Das mit Cy5-Alkin markierte PG PG-SH-Cy5 erscheint aufgrund des relativ hohen erreichten Markierungsgrades bei der Herstellung als aussichtsreichster Kandidat für weitere Untersuchungen. Diese Umsetzung besitzt noch Optimierungspotentiale bezüglich einer Verringerung des Polymerverlusts bei der Aufarbeitung, des erreichbaren Markierungsgrades und der Markierungsausbeute. Möglichkeiten, dies zu erreichen, wurden diskutiert.
3. Klare Aussagen über den Einfluss des esterhaltigen bzw. esterfreien Ausgangspolymers PG-SH auf die Konzentration und die Partikelgröße konnten aufgrund einer nicht ausreichenden Datenlage nicht getroffen werden.
4. Die esterhaltigen PG-SH-Moleküle erscheinen aufgrund ihrer Labilität gegenüber Hydrolyse für die NP-Synthese weniger geeignet (geringere Stabilität).
5. Die Charakterisierung der aus den markierten und unmarkierten Ausgangspolymeren hergestellten NG, welche teilweise zusätzlich mit dem Transportpeptid Tat funktionalisiert wurden, erfolgte mittels NTA und zeigt für die meisten Spezies relativ schmale, gut definierte, monomodale Größenverteilungen mit einem Maximum um 100-200 nm im Bereich von ca. 40 – max. 400 nm mit Partikelkonzentrationen im Bereich von 1010 - 1011 Partikeln/ml.
6. Insgesamt konnte gezeigt werden, dass der untersuchte, von PG-SH abgeleitete NP-Typ (z. B. NG_3, redox-sensitiv unmarkiert) aufgrund seiner Einheitlichkeit, Partikelgröße und der Reproduzierbarkeit der Herstellung als gut geeignet für den geplanten Einsatz in biologischen Systemen erscheint. Von den weiter derivatisierten NG erscheinen die folgenden aufgrund der oben geschilderten Kriterien als besonders geeignet für den geplanten Einsatz in biologischen Systemen und weiterer Untersuchungen wert: NG680_(TAT)_1-4 (redox-sensitiv, markiert), NGCy5_(TAT)_1 (redox-sensitiv, markiert), NG_MA_2 (nicht redox-sensitiv, unmarkiert), NGCy7_MA_1 (nicht redox-sensitiv, markiert). Aufgrund des relativ hohen erreichbaren Markierungsgrades bei der Markierung der Ausgangspolymere erscheinen die mit Cy5-markierten Verbindungen als besonders vorteilhaft.
7. Die esterfreien, redox-sensitiven NP erwiesen sich bei 14-tägiger Lagerung unter physiologischen Bedingungen als stabil. Ihre Konzentration nahm über 14 Tage um ca. 60 % vom Ausgangswert ab. Gleichzeitig nahm der Teilchendurchmesser während des Beobachtungszeitraums um ca. 25 % zu. Die Abnahme der Teilchenzahl ist - zumindest teilweise - durch eine Vergrößerung des mittleren Teilchendurchmessers und mögliche Adsorptionseffekte an die Gefäßwände des Versuchsaufbaus zu erklären.
8. Die Konzentration der esterfreien, nicht redox-sensitiven NP verringert sich bei 14-tägiger Inkubation unter physiologischen Bedingungen deutlich auf ca. 10 % des Ausgangswerts. Der mittlere Durchmesser der Partikel bleibt innerhalb des Untersuchungszeitraums innerhalb der Fehlergrenzen konstant. Die starke Abnahme der Partikelkonzentration ist wahrscheinlich auf die Hydrolyse des verwendeten esterhaltigen Crosslinkers PEGDA zurückzuführen. Desweiteren sind Adsorptionsphänomene an Oberflächen des Versuchsaufbaus nicht auszuschließen. Insgesamt hervorzuheben ist die wesentlich höhere Stabiliät der redox-sensitiven NP unter den Versuchsbedingungen. Diese Substanzklasse sollte daher weiter verfolgt werden.
9. Es wurde gezeigt, dass sowohl die NG, die das Aufnahmeprotein Tat enthalten, als auch die NG ohne Tat mit Fluoreszenz-markiertem BSA (8,3 µg/ml) wechselwirken und zusammen mit diesem bei der Zentrifugation abgeschieden werden. Über die Art der Wechselwirkung kann keine Aussage getroffen werden.
10. Durch in vitro Zellaufnahmeuntersuchungen an Hela-Zellen konnte gezeigt werden, dass die mit Tat funktionalisierten, redox-sensitiven, Fluoreszenz-markierten NP von den Zellen aufgenommen werden. Die Aufnahme erfolgt über eine deutlich erkennbare Vesikelbildung, die an der Plasmamembran verstärkt beobachtet werden kann. Im Gegensatz hierzu konnte bei den nicht mit Tat funktionalisierten NP keine vergleichbare in vitro Zellaufnahme beobachtet werden.
Die Ergebnisse dieser Arbeit bestätigen insgesamt das große Potential der von Thiol-funktionalisierten PG abgeleiteten NG für die medizinische Forschung und zukünftige Anwendungen in der Diagnostik und Therapie. Es wird eine Reihe von Ansatzpunkten aufgezeigt, auf deren Basis weitere vertiefende Untersuchungen zur Charakterisierung und Optimierung sowie zu zukünftigen nutzbringenden Anwendungen vorgenommen werden sollten.
Magnesiumphosphatschäume nehmen auf Grund ihrer guten Resorbierbarkeit, unter physiologischen Bedingungen, einen immer größeren Stellenwert als Knochenersatzmaterial ein. Ein weiterer Vorteil ist der neutrale pH-Wert den das entstehende Material besitzt. Magnesiumphosphatschäume besitzen eine hochporöse offenporige Struktur um zum einen den Knochen nachzuahmen und zum anderen die Steuerung und Bildung von Knochengewebe zu ermöglichen. In der vorliegenden Arbeit wurden die mechanischen Eigenschaften als auch die Zytokompatibilität der hergestellten Schäume untersucht.
Es wurden unterschiedliche Herstellungsverfahren genutzt um Magnesiumphosphatschäume zu erhalten. Zum einen das Replika- Verfahren, die dabei entstandenen Farringtonit Schäume (Mg3(PO4)2, Farringtonit) wurden zu Struvit ((NH4)Mg(PO4)•6H2O) umgewandelt bzw. mit PLGA infiltriert und auf ihre mechanische Eigenschaften hin untersucht. Zum anderen wurde ein proteinbasierter Schaumbildner verwendet. Die Zytokompatibilitätsprüfung wurde mit der Osteosarkomzelllinie MG-63 durchgeführt. Es erfolgte die Untersuchung der Zellproliferation und der Zellaktivität (WST). Zudem wurden Proben mittels Licht- und Elektronenmikroskopie analysiert. Die Feststellung der Proteinexpression erfolgte nach gelelektrophoretischer Auftrennung mittels Western Blot und PCR Analyse.
Thermoplastic polymers have a history of decades of safe and effective use in the clinic as implantable medical devices. In recent years additive manufacturing (AM) saw increased clinical interest for the fabrication of customizable and implantable medical devices and training models using the patients’ own radiological data. However, approval from the various regulatory bodies remains a significant hurdle. A possible solution is to fabricate the AM scaffolds using materials and techniques with a clinical safety record, e.g. melt processing of polymers. Melt Electrowriting (MEW) is a novel, high resolution AM technique which uses thermoplastic polymers. MEW produces scaffolds with microscale fibers and precise fiber placement, allowing the control of the scaffold microarchitecture. Additionally, MEW can process medical-grade thermoplastic polymers, without the use of solvents paving the way for the production of medical devices for clinical applications. This pathway is investigated in this thesis, where the layout is designed to resemble the journey of a medical device produced via MEW from conception to early in vivo experiments. To do so, first, a brief history of the development of medical implants and the regenerative capability of the human body is given in Chapter 1. In Chapter 2, a review of the use of thermoplastic polymers in medicine, with a focus on poly(ε-caprolactone) (PCL), is illustrated, as this is the polymer used in the rest of the thesis. This review is followed by a comparison of the state of the art, regarding in vivo and clinical experiments, of three polymer melt AM technologies: melt-extrusion, selective laser sintering and MEW. The first two techniques already saw successful translation to the bedside, producing patient-specific, regulatory-approved AM implants. To follow in the footsteps of these two technologies, the MEW device parameters need to be optimized. The MEW process parameters and their interplay are further discussed in Chapter 3 focusing on the importance of a steady mass flow rate of the polymer during printing. MEW reaches a balance between polymer flow, the stabilizing electric field and moving collector to produce reproducible, high-resolution scaffolds. An imbalance creates phenomena like fiber pulsing or arcing which result in defective scaffolds and potential printer damage. Chapter 4 shows the use of X-ray microtomography (µCT) as a non-destructive method to characterize the pore-related features: total porosity and the pore size distribution. MEW scaffolds are three-dimensional (3D) constructs but have long been treated in the literature as two-dimensional (2D) ones and characterized mainly by microscopy, including stereo- and scanning electron microscopy, where pore size was simply reported as the distance between the fibers in a single layer. These methods, together with the trend of producing scaffolds with symmetrical pores in the 0/90° and 0/60/120° laydown patterns, disregarded the lateral connections between pores and the potential of MEW to be used for more complex 3D structures, mimicking the extracellular matrix. Here we characterized scaffolds in the aforementioned symmetrical laydown patterns, along with the more complex 0/45/90/135° and 0/30/60/90/120/150° ones. A 2D pore size estimation was done first using stereomicroscopy, followed by and compared to µCT scanning. The scaffolds with symmetrical laydown patterns resulted in the predominance of one pore size, while those with more complex patterns had a broader distribution, which could be better shown by µCT scans. Moreover, in the symmetrical scaffolds, the size of 3D pores was not able to reach the value of the fiber spacing due to a flattening effect of the scaffold, where the thickness of the scaffold was less than the fiber spacing, further restricting the pore size distribution in such scaffolds. This method could be used for quality assurance of fabricated scaffolds prior to use in in vitro or in vivo experiments and would be important for a clinical translation. Chapter 5 illustrates a proof of principle subcutaneous implantation in vivo experiment. MEW scaffolds were already featured in small animal in vivo experiments, but to date, no analysis of the foreign body reaction (FBR) to such implants was performed. FBR is an immune reaction to implanted foreign materials, including medical devices, aimed at protecting the host from potential adverse effects and can interfere with the function of some medical implants. Medical-grade PCL was used to melt electrowrite scaffolds with 50 and 60 µm fiber spacing for the 0/90° and 0/60/120° laydown patterns, respectively. These implants were implanted subcutaneously in immunocompetent, outbred mice, with appropriate controls, and explanted after 2, 4, 7 and 14 days. A thorough characterization of the scaffolds before implantation was done, followed by a full histopathological analysis of the FBR to the implants after excision. The scaffolds, irrespective of their pore geometry, induced an extensive FBR in the form of accumulation of foreign body giant cells around the fiber walls, in a manner that almost occluded available pore spaces with little to no neovascularization. This reaction was not induced by the material itself, as the same reaction failed to develop in the PCL solid film controls. A discussion of the results was given with special regard to the literature available on flat surgical meshes, as well as other hydrogel-based porous scaffolds with similar pore sizes. Finally, a general summary of the thesis in Chapter 6 recapitulates the most important points with a focus on future directions for MEW.
Adipose tissue defects and related pathologies still represent major challenges in reconstructive surgery. Based on to the paradigm ‘replace with alike’, adipose tissue is considered the ideal substitute material for damaged soft tissue [1-3]. Yet the transfer of autologous fat, particularly larger volumes, is confined by deficient and unpredictable long term results, as well as considerable operative morbidity at the donor and recipient site [4-6], calling for innovative treatment options to improve patient care.
With the aim to achieve complete regeneration of soft tissue defects, adipose tissue engineering holds great promise to provide functional, biologically active adipose tissue equivalents. Here, especially long-term maintenance of volume and shape, as well as sufficient vascularization of engineered adipose tissue represent critical and unresolved challenges [7-9]. For adipose tissue engineering approaches to be successful, it is thus essential to generate constructs that retain their initial volume in vivo, as well as to ensure their rapid vascularization to support cell survival and differentiation for full tissue regeneration [9,10]. Therefore, it was the ultimate goal of this thesis to develop volume-stable 3D adipose tissue constructs and to identify applicable strategies for sufficient vascularization of engineered constructs. The feasibility of the investigated approaches was verified by translation from in vitro to in vivo as a critical step for the advancement of potential regenerative therapies.
For the development of volume-stable constructs, the combination of two biomaterials with complementary properties was successfully implemented. In contrast to previous approaches in the field using mainly non-degradable solid structures for mechanical protection of developing adipose tissue [11-13], the combination of a cell-instructive hydrogel component with a biodegradable porous support structure of adequate texture was shown advantageous for the generation of volume-stable adipose tissue. Specifically, stable fibrin hydrogels previously developed in our group [14] served as cell carrier and supported the adipogenic development of adipose-derived stem cells (ASCs) as reflected by lipid accumulation and leptin secretion. Stable fibrin gels were thereby shown to be equally supportive of adipogenesis compared to commercial TissuCol hydrogels in vitro. Using ASCs as a safe source of autologous cells [15,16] added substantial practicability to the approach. To enhance the mechanical strength of the engineered constructs, porous biodegradable poly(ε caprolactone)-based polyurethane (PU) scaffolds were introduced as support structures and shown to exhibit adequately sized pores to host adipocytes as well as interconnectivity to allow coherent tissue formation and vascularization. Low wettability and impaired cell attachment indicated that PU scaffolds alone were insufficient in retaining cells within the pores, yet cytocompatibility and differentiation of ASCs were adequately demonstrated, rendering the PU scaffolds suitable as support structures for the generation of stable fibrin/PU composite constructs (Chapter 3).
Volume-stable adipose tissue constructs were generated by seeding the pre-established stable fibrin/PU composites with ASCs. Investigation of size and weight in vitro revealed that composite constructs featured enhanced stability relative to stable fibrin gels alone. Comparing stable fibrin gels and TissuCol as hydrogel components, it was found that TissuCol gels were less resilient to degradation and contraction. Composite constructs were fully characterized, showing good cell viability of ASCs and strong adipogenic development as indicated by functional analysis via histological Oil Red O staining of lipid vacuoles, qRT-PCR analysis of prominent adipogenic markers (PPARγ, C/EBPα, GLUT4, aP2) and quantification of leptin secretion. In a pilot study in vivo, investigating the suitability of the constructs for transplantation, stable fibrin/PU composites provided with a vascular pedicle gave rise to areas of well-vascularized adipose tissue, contrasted by insufficient capillary formation and adipogenesis in constructs implanted without pedicle. The biomaterial combination of stable fibrin gels and porous biodegradable PU scaffolds was thereby shown highly suitable for the generation of volume-stable adipose tissue constructs in vivo, and in addition, the effectiveness of immediate vascularization upon implantation to support adipose tissue formation was demonstrated (Chapter 4).
Further pursuing the objective to investigate adequate vascularization strategies for engineered adipose tissue, hypoxic preconditioning was conducted as a possible approach for in vitro prevascularization. In 2D culture experiments, analysis on the cellular level illustrated that the adipogenic potential of ASCs was reduced under hypoxic conditions when applied in the differentiation phase, irrespective of the oxygen tension encountered by the cells during expansion. Hypoxic treatment of ASCs in 3D constructs prepared from stable fibrin gels similarly resulted in reduced adipogenesis, whereas endothelial CD31 expression as well as enhanced leptin and vascular endothelial growth factor (VEGF) secretion indicated that hypoxic treatment indeed resulted in a pro-angiogenic response of ASCs. Especially the observed profound regulation of leptin production by hypoxia and the dual role of leptin as adipokine and angiogenic modulator were considered an interesting connection advocating further study. Having confirmed the hypothesis that hypoxia may generate a pro-angiogenic milieu inside ASC-seeded constructs, faster vessel ingrowth and improved vascularization as well as an enhanced tolerance of hypoxia-treated ASCs towards ischemic conditions upon implanatation may be expected, but remain to be verified in rodent models in vivo (Chapter 5).
Having previously been utilized for bone and cartilage engineering [17-19], as well as for revascularization and wound healing applications [20-22], stromal-vascular fraction (SVF) cells were investigated as a novel cell source for adipose tissue engineering. Providing cells with adipogenic differentiation as well as vascularization potential, the SVF was applied with the specific aim to promote adipogenesis and vascularization in engineered constructs in vivo. With only basic in vitro investigations by Lin et al. addressing the SVF for adipose repair to date [23], the present work thoroughly investigated SVF cells for adipose tissue construct generation in vitro, and in particular, pioneered the application of these cells for adipose tissue engineering in vivo.
Initial in vitro experiments compared SVF- and ASC-seeded stable fibrin constructs in different medium compositions employing preadipocyte (PGM-2) and endothelial cell culture medium (EGM-2). It was found that a 1:1 mixture of PGM-2 and EGM-2, as previously established for co-culture models of adipogenesis [24], efficiently maintained cells with adipogenic and endothelial potential in SVF-seeded constructs in short and long-term culture setups. Observations on the cellular level were supported by analysis of mRNA expression of characteristic adipogenic and endothelial markers. In preparation of the evaluation of SVF-seeded constructs under in vivo conditions, a whole mount staining (WMS) method, facilitating the 3D visualization of adipocytes and blood vessels, was successfully established and optimized using native adipose tissue as template (Chapter 6).
In a subcutaneous nude mouse model, SVF cells were, for the first time in vivo, elucidated for their potential to support the functional assembly of vascularized adipose tissue. Investigating the effect of adipogenic precultivation of SVF-seeded stable fibrin constructs in vitro prior to implantation on the in vivo outcome, hormonal induction was shown beneficial in terms of adipocyte development, whereas a strong vascularization potential was observed when no adipogenic inducers were added. Via histological analysis, it was proven that the developed structures were of human origin and derived from the implanted cells. Applying SVF cells without precultivation in vitro but comparing two different fibrin carriers, namely stable fibrin and TissuCol gels, revealed that TissuCol profoundly supported adipose formation by SVF cells in vivo. This was contrasted by only minor SVF cell development and a strong reduction of cell numbers in stable fibrin gels implanted without precultivation. Histomorphometric analysis of adipocytes and capillary structures was conducted to verify the qualitative results, concluding that particularly SVF cells in TissuCol were highly suited for adipose regeneration in vivo. Employing the established WMS technique, the close interaction of mature adipocytes and blood vessels in TissuCol constructs was impressively shown and via species-specific human vimentin staining, the expected strong involvement of implanted SVF cells in the formation of coherent adipose tissue was confirmed (Chapter 7).
With the development of biodegradable volume-stable adipose tissue constructs, the application of ASCs and SVF cells as two promising cell sources for functional adipose regeneration, as well as the thorough evaluation of strategies for construct vascularization in vitro and in vivo, this thesis provides valuable solutions to current challenges in adipose tissue engineering. The presented findings further open up new perspectives for innovative treatments to cure soft tissue defects and serve as a basis for directed approaches towards the generation of clinically applicable soft tissue substitutes.
Was vor einigen Jahren undenkbar erschien, könnte zukünftig möglich sein: Krankes Gewebe mit Gesundem ersetzen, das in vitro mit modernsten Biofabrikationstechniken hergestellt wird. Dabei werden bisherige Grenzen überschritten: Während lichtbasierte Biodruckverfahren wie die Zwei-Photonen-Polymerisation Auflösungen bis in den Nanometerbereich erzielen, ermöglicht der Volumetrische Biodruck (VB) den Druck zentimetergroßer Konstrukte in wenigen Sekunden. Diese Geschwindigkeiten erweisen sich unter Biodruckverfahren als konkurrenzlos und werden erreicht, da das Bioharz nicht konsekutiv, sondern zugleich vernetzt wird. Einschränkend gilt bislang nur der Mangel an geeigneten Bioharzen für den VB. Daher beschäftigt sich vorliegende Arbeit mit der Charakterisierung und Modifikation eines dafür geeigneten Bioharzes: Gelatine-Methacrylat (GelMA). Dank seiner Zusammensetzung ähnelt das etablierte Hydrogelsystem der Extratrazellularmatrix: Der Gelatine-Anteil ermöglicht Biokompatibilität und Bioaktivität durch zelladhäsive sowie degradierbare Aminosäure-Sequenzen. Zugleich können durch photovernetzbare Methacryloyl-Substituenten Konstrukte mit einer Formstabilität bei 37 °C erzeugt werden.
Zunächst wurde das Bioharz zellbiologisch charakterisiert, indem mit der embryonalen Mausfibroblasten-Zelllinie NIH-3T3 beladene GelMA-Zylinder gegossen, photopolymerisiert und kultiviert wurden. Im Verlauf einer Woche wurde die Zytokompatibilität der Gele anhand der Proliferationsfähigkeit (PicoGreen-Assay), des Metabolismus (CCK-8-Assay) und der Vitalität (Live/Dead-Assay) der Zellen beurteilt. Dabei wurden Polymerkonzentrationen von 6 – 8 % sowie GelMA-Harze zweier verschiedener Molekulargewichte verglichen. Alle hergestellten Gele erwiesen sich als zytokompatibel, 6 % ige Gele ließen im Inneren jedoch zusätzlich eine beginnende Zellspreizung zu und ein niedriges GelMA-Molekulargewicht verstärkte die gemessene Proliferation. Die sich anschließende mechanische und physikalische Charakterisierung belegte, dass höher konzentrierte Gele einen größeren E-Modul aufwiesen und damit steifer waren. Eine Modifikation der Gele mit Fibronektin beeinflusste die Zellverträglichkeit weder positiv noch negativ und die Zugabe von Kollagen war wegen Entmischungseffekten nicht bewertbar. Es liegt die Vermutung nah, dass eine weitere Reduktion der Polymerkonzentration und damit Verringerung der Gelsteifigkeit der Schlüssel für mehr Zellspreizung und -wachstum ist. Da jedoch die Druckbarkeit des Bioharzes die weitere Senkung des GelMA-Gehalts limitiert, sollten zunächst Methoden entwickelt werden, welche die Netzwerkdichte des GelMAs anderweitig herabsetzen.
The aim of this thesis was the application of the functional prepolymer NCO-sP(EO-stat-PO) for the development of new biomaterials. First, the influence of the star-shaped polymers on the mechanical properties of biocements and bone adhesives was investigated. 3-armed star-shaped macromers were used as an additive for a mineral bone cement, and the influence on the mechanical properties was studied. Additionally, a previously developed bone adhesive was examined regarding cytocompatibility. The second topic was the examination of novel functionalization steps which were performed on the surface of electrospun fibers modified with NCO-sP(EO-stat-PO). This established method of functionalizing electrospun meshes was advanced regarding the modification with proteins which was then demonstrated in a biological application. Two different kinds of antibodies were immobilized on the fiber surface in a consecutive manner and the influence of these proteins on the cell behavior was investigated. The final topic involved the quantification of surface-bound peptide sequences. By functionalization of the peptides with the UV-reactive molecule 2-mercaptopyridine it was possible to quantify this compound via UV measurements by cleavage of disulfide bridges and indirectly draw conclusions about the number of immobilized peptides.
In the field of mineral biocements and bone adhesives, NCO-sP(EO-stat-PO) was able to influence the setting behavior and mechanical performance of mineral bone cements based on calcium phosphate chemistry. The addition of NCO-sP(EO-stat-PO) resulted in a pseudo-ductile fracture behavior due to the formation of a hydrogel network in the cement, which was then mineralized by nanosized hydroxyapatite crystals following cement setting. Accordingly, a commercially available aluminum silicate cement from civil engineering could be modified.
In addition, it could be shown that the use of NCO-sP(EO-stat-PO) is beneficial for adjusting specific material properties of bone adhesives. Here, the crosslinking behavior of the prepolymer in an aqueous medium was exploited to form an interpenetrating network (IPN) together with a photochemically curing poly(ethylene glycol) dimethacrylate (PEGDMA) matrix. This could be used for the development of a bone adhesive with an improved adhesion to bone in a wet environment. The developed bone adhesive was further investigated in terms of possible influences of the initiator systems. In addition, the material system was tested for cytocompatibility by using different cell lines.
Moreover, the preparation of electrospun fiber meshes via solution electrospinning consisting of poly(lactide-co-glycolide) (PLGA) as a backbone polymer and NCO-sP(EO-stat-PO) as functional additive is an established method for the application of the meshes as a replacement of the native extracellular matrix (ECM). In general, these fibers reveal diameters in the nanometer range, are protein and cell repellent due to the hydrophilic properties of the prepolymer and show a specific biofunctionalization by immobilization of peptide sequences. Here, the isocyanate groups presented on the fiber surface after electrospinning were used to carry out various functionalization steps, while retaining the properties of protein and cell repellency. The modification of the electrospun fibers involved the immobilization of analogs or antagonists of tumor necrosis factor (TNF) and the indirect detection of these by interaction with a light-producing enzyme. Here, a multimodal modification of the fiber surface with RGD to mediate cell adhesion and two different antibodies could be achieved. After culturing the cell line HT1080, the pro- or anti-inflammatory response of cells could be detected by IL-8 specific ELISA measurements.
Furthermore, the quantification of molecules on the surface of electrospun fibers was investigated. It was tested whether the detection by means of super-resolution microscopy would be possible. Therefore, experiments were performed with short amino acid sequences such as RGD for quantification by fluorescence microscopy. Based on earlier results, in which a UV-spectrometrically active molecule was used to detect the quantification of RGD, it was shown that short peptides can also be quantified in a small scale on flat functional substrates (2D) such as NCO-sP(EO-stat-PO) hydrogel coatings, and modified electrospun fibers produced from PLGA and NCO-sP(EO-stat-PO) (3D). In addition, a collagen sequence was used to prove that a successful quantification can be carried out as well for longer peptide chains.
These studies have revealed that NCO-sP(EO-stat-PO) can serve as a functional additive for many applications and should be considered for further studies on the development of novel biomaterials. The rapid crosslinking reaction, the resulting hydrogel formation and the biocompatibility are to be mentioned as positive properties, which makes the prepolymer interesting for future applications.
Bei der Implantatversorgung von Patienten mit Osteoporose besteht weiterhin eine hohe Komplikationsrate vor allem durch aseptische Prothesenlockerungen. Eine vielversprechende Möglichkeit diese zu minimieren stellt eine Funktionalisierung der Implantate mit Strontium dar.
Ziel der vorliegenden Arbeit war es dabei die Wirkung lokal verfügbaren Strontiums auf osteoklastäre und osteoblastäre Zellen zu untersuchen.
Mittels elektrochemischer Abscheidung erfolgte die Beschichtung von Titanproben mit strontiumdotiertem Struvit, wobei sieben verschiedene Dotierkonzentrationen zwischen 6 µg und 487 µg Strontium pro Probe hergestellt wurden. Die Untersuchungen an osteoklastären RAW 264.7 Zellen erfolgten mittels Bestimmung von Zellzahl und -aktivität, verschiedener mikroskopischer Methoden sowie auf genetischer Ebene. Osteoblastäre MG63-Zellen wurden orientierend anhand von Zellzahl und Zellaktivität untersucht.
Zellbiologisch konnte ein hemmender Einfluss von Strontium auf Differenzierung sowie Proliferation und Aktivität osteoklastärer Zellen gezeigt werden. Die Dotierkonzentration mit den günstigsten Eigenschaften war unter vorliegenden Versuchsbedingungen 487 µg Strontium pro Probe, da sich hierbei zudem eine erhaltene ostoblastäre Proliferation und Aktivität zeigte.
In Tissue Engineering, scaffolds composed of natural polymers often show a distinct lack in stability. The natural polymer gelatin is highly fragile under physiological conditions, nevertheless displaying a broad variety of favorable properties. The aim of this study was to fabricate electrospun gelatin nanofibers, in situ functionalized and stabilized during the spinning process with highly reactive star polymer NCO-sP(EO-stat-PO) (“sPEG”). A spinning protocol for homogenous, non-beaded, 500 to 1000 nm thick nanofibers from different ratios of gelatin and sPEG was successfully established. Fibers were subsequently characterized and tested with SEM imaging, tensile tests, water incubation, FTIR, EDX, and cell culture. It was shown that adding sPEG during the spinning process leads to an increase in visible fiber crosslinking, mechanical stability, and stability in water. The nanofibers were further shown to be biocompatible in cell culture with RAW 264.7 macrophages.
Background: Glioblastoma multiforme (GBM) and metastatic triple-negative breast cancer (TNBC) with PTEN mutations often lead to brain dissemination with poor patient outcome, thus new therapeutic targets are needed. To understand signaling, controlling the dynamics and mechanics of brain tumor cell migration, we implemented GBM and TNBC cell lines and designed 3D aligned microfibers and scaffolds mimicking brain structures. Methods: 3D microfibers and scaffolds were printed using melt electrowriting. GBM and TNBC cell lines with opposing PTEN genotypes were analyzed with RHO-ROCK-PTEN inhibitors and PTEN rescue using live-cell imaging. RNA-sequencing and qPCR of tumor cells in 3D with microfibers were performed, while scanning electron microscopy and confocal microscopy addressed cell morphology. Results: In contrast to the PTEN wildtype, GBM and TNBC cells with PTEN loss of function yielded enhanced durotaxis, topotaxis, adhesion, amoeboid migration on 3D microfibers and significant high RHOB expression. Functional studies concerning RHOB-ROCK-PTEN signaling confirmed the essential role for the above cellular processes. Conclusions: This study demonstrates a significant role of the PTEN genotype and RHOB expression for durotaxis, adhesion and migration dependent on 3D. GBM and TNBC cells with PTEN loss of function have an affinity for stiff brain structures promoting metastasis. 3D microfibers represent an important tool to model brain metastasizing tumor cells, where RHO-inhibitors could play an essential role for improved therapy.
Es erfolgte eine elektrochemische Abscheidung von Bruschitschichten auf Titan in Gegenwart von Kristallisationsinhibitoren. Dabei wurden die Kristallisationsinhibitoren Zitronensäure, treta-Natriumdiphosphat-Decahydrat und Phytinsäure verwendet und die entstandenen Schichten mit denen ohne Inhibitorzugabe verglichen. Um das Ausmaß der Inhibierung zu verifizieren, wurde die Masse aller Schichten gemessen, welche für die Inhibition mit Zitronensäure und Phytinsäure abnahm und für Natriumdiphosphat zunahm. Die kristallographische Zusammensetzung der mit und ohne Inhibierung abgeschiedenen Schichten wurde mit Hilfe der Röntgendiffraktometrie bestimmt und zeigte, dass sich reine Bruschitschichten mit unterschiedlichem amorphem Anteil abschieden. Die daraus entstandenen Werte lieferten zugleich die Informationen über die einzelnen Kristallitgrößen innerhalb der Schichten. Über den Einfluss der Inhibitoren auf die Schichtmorphologie gaben rasterelektronenmikroskopische Aufnahmen weiteren Aufschluss. Die Inhibition verursachte teils mit Rissen durchzogene Schichten, deren Kristallformationen sich von Standardelektrolyt unterschieden. Ausgewählte Proben wurden unter verschiedenen Bedingungen desinfiziert bzw. sterilisiert und nachfolgend erneut gewogen und mittels Röntgendiffraktogrammetrie und Rasterelektronenmikroskopie analysiert. Nach der Desinfektion entstanden reine Bruschitschichten, die an Masse verloren aber trotzdem die typischen Kristallformationen zeigten. Die Sterilisation führte zur Umwandlung von Bruschit in Monetit und Hydroxylapatit. Des Weiteren wurde die biologische Reaktion der Schichten auf humane fötale Osteoblasten-Zelllinien zur Überprüfung der Zellverträglichkeit ermittelt. Die entstandenen Ergebnisse waren nicht verwertbar und enthielt sehr hohe Standardabweichungen.