Refine
Has Fulltext
- yes (18)
Is part of the Bibliography
- yes (18) (remove)
Year of publication
Document Type
- Doctoral Thesis (17)
- Preprint (1)
Keywords
- Optische Spektroskopie (18) (remove)
Institute
Sonstige beteiligte Institutionen
EU-Project number / Contract (GA) number
- 614623 (1)
Vom Monomer zum Polymer: Iterative Synthese und optische Spektroskopie von Squarain-Oligomeren
(2022)
Mittels einer Schutzgruppenstrategie wurden Squarain-basierte monodisperse Oligomere synthetisiert. Die lösungsmittelabhängigen Konformationen (Random Coil vs. Helix) wie auch der Faltungsprozess der Homooligomere wurden mittels optischer Spektroskopie, verschiedener NMR-Experimenten, Kleinwinkelneutronenstreuungsexperimenten sowie quantenchemischen Berechnungen näher beleuchtet. Die optisch-spektroskopischen Beobachtungen wurden mithilfe der Exzitonenkopplungstheorie und einer Orientierungs- und Winkelabhängigkeit der Übergangsdipolmomente der Oligomere erklärt. Der hohe Windungsabstand der helikalen Konformation führt zu einer Interkalation von Lösungsmittel, wodurch eine Art Klathrat gebildet wird. Zusätzlich wurden mittels eines Frenkel-Exzitonenmodells die Absorptions- und Fluoreszenzspektren modelliert. Es konnten die Exzitonendelokalisationslängen abgeschätzt und die Auswirkung der energetischen und strukturellen Unordnungen auf die Absorptions- und Fluoreszenzspektren bestimmt werden. Die Absorptionsspektren werden vorwiegend durch strukturelle Unordnungen verbreitert, die Fluoreszenzspektren dagegen von energetischen Übergangsenergieabweichungen.
Weiterhin wurden auch alternierende Squarain-Cooligomere synthetisiert und mittels optischer Spektroskopie untersucht. Es wurde, abhängig von dem gewählten Lösungsmittel, eine Verschiebung der Hauptbande beobachtet, was durch einen Random Coil vs. helikale-/schlaufenartige Konformation erklärt wird. Gestützt wurde dies mittels quantenchemischen Berechnungen der jeweiligen Konformationen.
Abschließend wurden alternierende Squarain-Copolymere synthetisiert, in verschiedenen Größen aufgetrennt und mittels optischer Spektroskopie untersucht. Mittels EEI2D-Experimenten wurde die Exzitonendynamik in Abhängigkeit von der Kettenlänge eingehender untersucht. Hierbei wird eine steigende, aber relativ abnehmende Kohärenzlänge bestimmt, die Auswirkungen auf die Exzitonendynamik hat. Der Exzitonentransport weist erst wellenförmiges und dann subdiffuses Verhalten auf.
Time-resolved optical spectroscopy has become an important tool to investigate the dynamics of quantum mechanical processes in matter. In typical applications, a first “pump” pulse excites the system under investigation from the thermal equilibrium to an excited state, and a second variable time-delayed “probe” pulse then maps the dynamics of the excited system. Although advanced nonlinear techniques have been developed to investigate, e.g., coherent quantum effects, all of these techniques are limited in their spatial resolution. The laser focus diameter has a lower bound given by Abbe’s diffraction limit, which is roughly half the optical excitation wavelength—corresponding to about 400nm in the presented experiments. In the time-resolved experiments that have been suggested so far, averaging over the sample volume within this focus cannot be avoided. In this thesis, two approaches were developed to overcome the diffraction limit in optical spectroscopy and to enable the investigation of coherent processes on the nanoscale. In the first approach, analytic solutions were found to calculate optimal polarizationshaped laser pulses that provide optical near-field pump–probe pulse sequences in the vicinity of a nanostructure. These near-field pulse sequences were designed to allow excitation of a quantum system at one specific position at a certain time and probing at a different position at a later time. In the second approach, the concept of coherent two-dimensional (2D) spectroscopy, which has had great impact on the investigation of coherent quantum effects in recent years, was combined with photoemission electron microscopy, which yields a spatial resolution well below the optical diffraction limit. Using the analytic solutions, optical near fields were investigated in terms of spectroscopic applications. Near fields that are excited with polarization-shaped femtosecond laser pulses in the vicinity of appropriate nanostructures feature two properties that are especially interesting in the view of spectroscopic applications: On the one hand, control of the spatial distribution of the optical fields is achieved on the order of nanometers. On the other hand, the temporal evolution of these fields can be adjusted on the order of femtoseconds. In this thesis, solutions were found to calculate the optimal polarizationshaped laser pulses that control the near field in a general manner. The main idea to achieve this deterministic control was to disentangle the spatial and temporal near-field control. First, the spatial distribution of the optical near field was controlled by assigning the correct state of polarization for each frequency within the polarization-shaped laser pulse independently. The remaining total phase—not employed for spatial control—was then used for temporal near-field compression, which, in experimental applications, would lead to an enhancement of the nonlinear signal at the respective location. In contrast to the use of optical near fields, where pump–probe sequences themselves are localized below the diffraction limit and the detection does not have to provide the spatial resolution, a different approach was suggested in this thesis to gain spectroscopic information on the nanoscale. The new method was termed “Coherent two-dimensional (2D) nanoscopy” and transfers the concept of “conventional” coherent 2D spectroscopy to photoemission electron microscopy. The pulse sequences used for the investigation of quantum systems in this method are still limited by diffraction. However, the new key concept is to detect locally generated photoelectrons instead of optical signals. This yields a spatial resolution that is well below the optical diffraction limit. In “conventional” 2D spectroscopy a triple-pulse sequence initiates a four wave mixing process that creates a coherence. In a quantum mechanical process, this coherence is converted into a population by emission of an electric field, which is measured in the experiment. Contrarily, in the developed 2D nanoscopy, four-wave mixing is initiated by a quadruple-pulse sequence, which leaves the quantum system in an electronic population. This electronic population carries coherent information about the investigated quantum system and can be mapped with a spatial resolution down to a few nanometers given by the spatial resolution of the photoemission electron microscope. Hence, 2D nanoscopy can be considered a generalization of time-resolved photoemission experiments. In the future, it may be of similar beneficial value for the field of photoemission research as “conventional” 2D spectroscopy has proven to be for optical spectroscopy and nuclear magnetic resonance experiments. In a first experimental implementation of coherent 2D nanoscopy coherent processes on a corrugated silver surface were measured and unexpected long coherence lifetimes could be determined.
Die vorliegende Arbeit befasste sich mit dem Spin- und dem damit eng verbundenen Polarisationszustand von Ladungsträgern in CdSe/ZnSe Quantenpunkten. II-VI Materialsysteme können in geeigneter Weise mit dem Nebengruppenelement Mangan gemischt werden. Diese semimagnetischen Nanostrukturen weisen eine Vielzahl von charakteristischen optischen und elektrischen Besonderheiten auf. Verantwortlich dafür ist eine Austauschwechselwirkung zwischen dem Spin optisch erzeugter Ladungsträger und den 3d Elektronen der Mn Ionen. Im Rahmen dieser Arbeit erfolgte die Adressierung gezielter Spinzustände durch optische Anregung der Ladungsträger. Die Besetzung unterschiedlicher Spinzustände konnte durch Detektion des Polarisationsgrades der emittierten Photolumineszenz (PL) bestimmt werden. Dabei kamen verschiedene optische Methoden wie zeitaufgelöste und zeitintegrierte PL-Spektroskopie sowie Untersuchungen in Magnetfeldern zum Einsatz.
In this work, femtosecond laser pulses are used to launch optical excitations on different nanostructures. The excitations are confined below the diffraction limit and propagate along the nanostructures.
Fundamental properties of these ultrashort optical near fields are determined by characterizing the far-field emission after propagation with a setup developed for this task. Furthermore, control of the nanooptical excitations' spatial and temporal evolution is demonstrated for a designed nanostructure.
Since the late 20th century, spintroncis has become a very active field of research [ŽFS04]. The prospect of spin based information technology, featuring strongly decreased energy consumption and possibly quantum-computation capabilities, has fueled this interest. Standard materials, like bulk gallium arsenide (GaAs), have experienced new attention in this context by exhibiting extraordinarily long lifetimes for nonequilibrium spin information, which is an important requirement for efficient spin based information storage and transfer. Another important factor is the lengthscale over which spin information can be transported in a given material and the role of external influences. Both aspects have been studied experimentally with innovative optical methods since the late 1990s by the groups of D. D. AWSHALOM and S. A. CROOKER et al. [KA99, CS05, CFL+05]. Although the pioneering experimental approaches presented by these authors led to a variety of insights into spin propagation, some questions were raised as well. Most prominently, the classical Einstein relation, which connects the mobility and diffusivity of a given particle species, seemed to be violated for electron spins in a bulk semiconductor. In essence, nonequilibrium spins appeared to move (diffuse) faster than the electrons that actually carry the spin. However, this contradiction was masked by the fact, that the material of interest was n-type GaAs with a doping concentration directly at the transition between metallic and insulating behavior (MIT). In this regime, the electron mobility is difficult to determine experimentally. Consequently, it was not a priori obvious that the spin diffusion rates determined by the newly introduced optical methods were in contradiction with established electrical transport data.
However, in an attempt to extend the available data of optical spin microscopy, another issue surfaced, concerning the mathematical drift-diffusion model that has been commonly used to evaluate lateral spin density measurements. Upon close investigation, this model appears to have a limited range of applicability, due to systematic discrepancies with the experimental data (chapter 4). These deviations are noticeable in original publications as well, and it is shown in the present work that they originate from the local heating of electrons in the process of optical spin pumping. Based on insights gained during the second half of the 20th century, it is recapitulated why conduction electrons are easily overheated at cryogenic temperatures. The main reason is the poor thermal coupling between electrons and the crystal lattice (chapter 3). Experiments in the present work showed that a significant thermal gradient exists in the conduction band under local optical excitation of electron–hole pairs. This information was used to develop a better mathematical model of spin diffusion, which allowed to derive the diffusivity of the undisturbed system, due to an effective consideration of electron overheating. In this way, spin diffusivities of n-GaAs were obtained as a function of temperature and doping density in the most interesting regime of the metal–insulator-transition.
The experiments presented in this work were performed on a series of n-type bulk GaAs samples, which comprised the transition between metallic conductivity and electrical insulation at low temperatures. Local electron temperature gradients were measured by a hyperspectral photoluminescence imaging technique with subsequent evaluation of the electron–acceptor (e,A$^0$) line shape. The local density of nonequilibrium conduction electron spins was deduced from scanning magneto-optic Kerr effect microscopy. Numerical evaluations were performed using the finite elements method in combination with a least-squares fitting procedure.
Chapter 1 provides an introduction to historical and recent research in the field of spintronics, as far as it is relevant for the understanding of the present work. Chapter 2 summarizes related physical concepts and experimental methods. Here, the main topics are semiconductor optics, relaxation of hot conduction electrons, and the dynamics of nonequilibrium electron spins in semiconductors.
Chapter 3 discusses optical heating effects due to local laser excitation of electron–hole pairs. Experimental evaluations of the acceptor-bound-exciton triplet lines led to the conclusion that the crystal lattice is usually not overheated even at high excitation densities. Here, the heat is efficiently dissipated to the bath, due to the good thermal conductivity of the lattice. Furthermore, the heating of the lattice is inherently limited by the weak heat transfer from the electron system, which on the other hand is also the reason why conduction electrons are easily overheated at temperatures below ≈ 30 K. Spatio-spectral imaging of the electron–acceptor-luminescence line shape allowed to trace the thermal gradient within the conduction band under focused laser excitation. A heat-diffusion model was formulated, which reproduces the experimental electron-temperature trend nicely for low-doped GaAs samples of n- and p-type. For high-doped n-type GaAs samples, it could be shown that the lateral electron-temperature profile is well approximated by a Gaussian. This facilitated easy integration of hot electron influence into the mathematical model of spin diffusion.
Chapter 4 deals with magneto-optical imaging of optically induced nonequilibrium conduction-electron spins in n-GaAs close to the MIT. First, the spectral dependence of the magneto-optic Kerr effect was examined in the vicinity of the fundamental band gap. Despite the marked differences among the investigated samples, the spectral shape of the Kerr rotation could be described in terms of a simple Lorentz-oscillator model in all cases. Based on this model, the linearity of the Kerr effect with respect to a nonequilibrium spin polarization is demonstrated, which is decisively important for further quantitative evaluations.
Furthermore, chapter 4 presents an experimental survey of spin relaxation in n-GaAs at the MIT. Here, the dependence of the spin relaxation time on bath temperature and doping density was deduced from Hanle-MOKE measurements. While all observed trends agree with established literature, the presented results extend the current portfolio by adding a coherent set of data.
Finally, diffusion of optically generated nonequilibrium conduction-electron spins was investigated by scanning MOKE microscopy. First, it is demonstrated that the standard diffusion model is inapplicable for data evaluation in certain situations. A systematic survey of the residual deviations between this model and the experimental data revealed that this situation unfortunately persisted in published works. Moreover, the temperature trend of the residual deviations suggests a close connection to the local overheating of conduction electrons. Consequently, a modified diffusion model was developed and evaluated, in order to compensate for the optical heating effect. From this model, much more reliable results were obtained, as compared to the standard diffusion model. Therefore, it was shown conclusively that the commonly reported anomalously large spin diffusivities were at least in parts caused by overheated conduction electrons.
In addition to these new insights some experimental and technological enhancements were realized in the course of this work. First, the optical resolution of scanning MOKE microscopy was improved by implementing a novel scanning mechanism, which allows the application of a larger aperture objective than in the usual scheme. Secondly, imaging photoluminescence spectroscopy was employed for spatially resolved electron-temperature measurements. Here, two different implementations were developed: One for lattice-temperature measurements by acceptor–bound exciton luminescence and a second for conduction-electron temperature measurements via the analysis of the electron–acceptor luminescence line shape.
It is shown in the present work that the originally stated anomalously high spin diffusivities were caused to a large extent by unwanted optical heating of the electron system. Although an efficient method was found to compensate for the influence of electron heating, it became also evident that the classical Einstein relation was nonetheless violated under the given experimental conditions. In this case however, it could be shown that this discrepancy did not originate from an experimental artifact, but was instead a manifestation of the fermionic nature of conduction electrons.
In order to shrink the size of semiconductor devices and improve their
efficiency at the same time, silicon-based semiconductor devices have
been engineered, until the material almost reaches its performance
limits. As the candidate to be used next in semiconducting devices,
single-wall carbon nanotubes show a great potential due to their
promise of increased device efficiency and their high charge carrier
mobilities in the nanometer size active areas. However, there are
material based problems to overcome in order to imply SWNTs in the
semiconductor devices. SWNTs tend to aggregate in bundles and it is
not trivial to obtain an electronically or chirally homogeneous SWNT
dispersion and when it is done, a homogeneous thin film needs to be
produced with a technique that is practical, easy and scalable. This
work was aimed to solve both of these problems.
In the first part of this study, six different polymers, containing
fluorene or carbazole as the rigid part and bipyridine, bithiophene or
biphenyl as the accompanying copolymer unit, were used to selectively
disperse semiconducting SWNTs. With the data obtained from
absorption and photoluminescence spectroscopy of the corresponding
dispersions, it was found out that the rigid part of the copolymer plays a
primary role in determining its dispersion efficiency and electronic
sorting ability. Within the two tested units, carbazole has a higher π
electron density. Due to increased π−π interactions, carbazole
containing copolymers have higher dispersion efficiency. However, the
electronic sorting ability of fluorene containing polymers is superior.
Chiral selection of the polymers in the dispersion is not directly
foreseeable from the selection of backbone units. At the end, obtaining a monochiral dispersion is found to be highly dependent on the used raw
material in combination to the preferred polymer.
Next, one of the best performing polymers due to high chirality
enrichment and electronic sorting ability was chosen in order to
disperse SWNTs. Thin films of varying thickness between 18 ± 5 to
755o±o5 nm were prepared using vacuum filtration wet transfer method
in order to analyze them optically and electronically.
The scalability and efficiency of the integrated thin film production
method were shown using optical, topographical and electronic
measurements. The relative photoluminescence quantum yield of the
radiative decay from the SWNT thin films was found to be constant for
the thickness scale. Constant roughness on the film surface and linearly
increasing concentration of SWNTs were also supporting the scalability
of this thin film production method. Electronic measurements on bottom
gate top contact transistors have shown an increasing charge carrier
mobility for linear and saturation regimes. This was caused by the
missing normalization of the mobility for the thickness of the active
layer. This emphasizes the importance of considering this dimension for
comparison of different field effect transistor mobilities.
Die vorliegende Arbeit beschäftigt sich mit optischen Untersuchungen an niederdimensionalen III/V-Halbleiterstrukturen. Dabei werden zunächst im ersten Teil selbst-organisiert gewachsene Nanodrähte aus InP und GaN bezüglich ihrer Oberflächen- und Kristallqualität charakterisiert. Dies ist besonders im Hinblick auf zukünftige opto- und nanoelektronische Bauteile von Interesse. Der zweite, grundlagenorientierte Teil der Arbeit ist im Bereich der Quantenoptik angesiedelt und widmet sich magneto-optischen Studien zur Licht-Materie Wechselwirkung in Quantenpunkt-Mikroresonator-Systemen im Regime der starken Kopplung. Oberflächen-Untersuchungen an Halbleiter-Nanodrähten Bei diesem Teilaspekt der vorliegenden Arbeit stehen Untersuchungen von Halbleiter-Nanodrähten mittels zeitintegrierter und zeitaufgelöster Photolumineszenz (PL)-Spektroskopie im Vordergrund. Diese eindimensionalen Nanostrukturen bieten eine vielversprechende Perspektive für die weitere Miniaturisierung in der Mikroelektronik. Da konventionelle Strukturierungsverfahren wie die optische Lithographie zunehmend an physikalische und technologische Grenzen stoßen, sind selbstorganisierte Wachstumsprozesse hierbei von besonderem Interesse. Bei Nanodrähten besteht darüber hinaus konkret noch die Möglichkeit, über ein gezieltes axiales und radiales Wachstum von Heterostrukturen bereits bei der Herstellung komplexere Funktionalitäten einzubauen. Auf Grund ihres großen Oberfläche-zu-Volumen Verhältnisses sind die elektronischen und optischen Eigenschaften der Nanodrähte extrem oberflächensensitiv, was vor allem im Hinblick auf zukünftige Anwendungen im Bereich der Mikro- oder Optoelektronik sowie der Sensorik von essentieller Bedeutung ist. Zur näheren Untersuchung der Oberflächeneigenschaften von Nanodrähten eignet sich die optische Spektroskopie besonders, da sie als nicht-invasive Messmethode ohne aufwändige Probenpräparation schnell nützliche Informationen liefert, die zum Beispiel in der Optimierung des Herstellungsprozesses eingesetzt werden können. Quantenoptik an Halbleiter-Mikrokavitäten Der zweite Teil dieser Arbeit widmet sich der Licht-Materie-Wechselwirkung in Quantenpunkt-Mikroresonator-Systemen. Dabei ist das Regime der starken Kopplung zwischen Emitter und Resonator, auch im Hinblick auf mögliche zukünftige Anwendungen in der Quanteninformationsverarbeitung, von besonderem Interesse. Diese Mikroresonator-Türmchen, die auf planaren AlAs/GaAs-Mikroresonatoren mit InGaAs Quantenpunkten in der aktiven Schicht basieren, wurden mittels zeitintegrierter und zeitaufgelöster Mikro-PL-Spektroskopie in einem äußeren magnetischen Feld in Faraday-Konfiguration untersucht. Grundlegende Untersuchungen von Quantenpunkten im Magnetfeld Zunächst wurden InxGa(1−x)As-Quantenpunkte mit unterschiedlichem In-Gehalt (x=30%, 45% und 60%) magneto-optisch untersucht. Aufgrund der größeren Abmessungen weisen die Quantenpunkte mit 30% In-Anteil auch hohe Oszillatorstärken auf, was sie besonders für Experimente zur starken Kopplung auszeichnet. Unter dem Einfluss des Magnetfeldes zeigte sich ein direkter Zusammenhang zwischen der lateralen Ausdehnung der Quantenpunkte und ihrer diamagnetischen Verschiebung. Starke Kopplung im magnetischen Feld Neben der Möglichkeit, das Resonanzverhalten über das externe Magnetfeld zu kontrollieren, zeigte sich eine Korrelation zwischen der Kopplungsstärke und dem magnetischen Feld, was auf eine Verringerung der Oszillatorstärke im Magnetfeld zurückgeführt werden konnte. Diese steht wiederum im Zusammenhang mit einer Einschnürung der Wellenfunktion des Exzitons durch das angelegte Feld. Dieser direkte Einfluss des Magnetfeldes auf die Oszillatorstärke erlaubt eine in situ Variation der Kopplungsstärke. Photon-Photon-Wechselwirkung bei der starken Kopplung im Magnetfeld Nach der Demonstration der starken Kopplung zwischen entarteten Exziton- und Resonatormoden im Magnetfeld, wurden im weiteren Verlauf Spin-bezogene Kopplungseffekte im Regime der starken Kopplung untersucht. Es ergaben sich im Magnetfeld unter Variation der Temperatur zwei Bereiche der Wechselwirkung zwischen den einzelnen Komponenten von Resonator- und Exzitonenmode. Von besonderem Interesse ist dabei eine beobachtete indirekte Wechselwirkung zwischen den beiden photonischen Moden im Moment der Resonanz, die durch die exzitonische Mode vermittelt wird. Diese sogenannte Spin-vermittelte Photon-Photon-Kopplung stellt ein Bindeglied zwischen eigentlich unabhängigen photonischen Moden über den Spinzustand eines Exzitons dar.
We demonstrate two-quantum (2Q) coherent two-dimensional (2D)electronic spectroscopy using a shot-to-shot-modulated pulse shaper and fluorescence detection. Broadband collinear excitation is realized with the supercontinuum output of an argon-filled hollow-core fiber, enabling us to excite multiple transitions simultaneously in the visible range. The 2Q contribution is extracted via a three-pulse sequence with 16-fold phase cycling and simulated employing cresyl violet as a model system. Furthermore, we report the first experimental realization of one-quantum−two-quantum (1Q-2Q) 2D spectroscopy, offering less congested spectra as compared with the 2Q implementation. We avoid scattering artifacts and nonresonant solvent contributions by using fluorescence as the observable. This allows us to extract quantitative information about doubly excited states that agree with literature expectations. The high sensitivity and background-free nature of fluorescence detection allow for a general applicability of this method to many other systems.
In dieser Arbeit habe ich mich hauptsächlich mit der optischen Spektroskopie im sichtbaren bis nahinfraroten Bereich an Akzeptoren für organische bulk-heterojunction Polymer-Fulleren Solarzellen beschäftigt. Dabei führte ich sowohl Untersuchungen an reinen Fullerenproben als auch Gemischen dieser mit Polymeren durch. Ergänzend sind Messungen zur Morphologie, den Spinzuständen und der Solarzellenleistung erfolgt. Erreicht werden sollte, die generelle Eignung neuartiger Akzeptoren für organische Solarzellen festzustellen, die photoinduzierten spektroskopischen Signaturen von optisch angeregten Anionen auf Fullerenen verschiedener Größe zu finden und zu interpretieren sowie zum Abschluss die Abläufe der Ladungsträgergeneration in Polymer:Lu3N@C80 Solarzellen nachzuvollziehen und dadurch die Ursache der vergleichsweise geringen Stromdichte in diesen Zellen zu verstehen, die 25 % geringer ist als in P3HT:PC60BM Solarzellen. Die Ergebnisse sind, dass C70-C70 Dimer Fullerene sehr gute Akzeptoren darstellen, die neben einer etwas besseren Absorption als C60 basierte Akzeptoren im Bereich um 500 nm sehr gute Fähigkeiten als Elektronenakzeptoren zeigen. Die Messung an Fullerenen verschiedener Größe, um Anionensignaturen zu finden, hat deutliche Signaturen für C60- bei 1.18 eV und für C70- bei 0.92 eV erbracht. Weniger einfach zu finden und interpretieren sind die Signaturen von C80- und C84-. Aufgrund der geringen Signalstärke sowie spezieller Eigenheiten der zur Verfügung stehenden Fullerene konnte ich nur einen ungefähren Bereich von 0.7~eV bis 0.4~eV für die Anionensignaturen abschätzen. Allerdings zeigt sich für alle Fullerene eine Rotverschiebung der Anionensignaturen hin zu niedrigeren Energien mit steigender Zahl der Kohlenstoffatome pro Fulleren. Die umfangreichste Untersuchung habe ich an dem Molekül Lu3N@C80 in seiner Funktion als Elektronenakzeptor in P3HT:Lu3N@C80 Solarzellen gemacht. Während das Molekül in Kombination mit P3HT eine hohe Leerlaufspannung von 835 mV erzeugt, ergeben diese Zellen geringere Stromdichten. Mein Ziel war es, die Prozesse zu identifizieren und zu verstehen, die dafür verantwortlich zeichnen. Aus der Kombination verschiedener Messmethoden, ergänzt mit generellen Erkenntnissen zu endohedralen Fullerenen aus der Literatur, ließ es zu, einen intramolekularen Elektronentransfer von den Lutetiumatomen innerhalb des C80 auf das Fulleren als Ursache zu identifizieren. Die in dieser Arbeit gewonnenen Daten liefern weitere Indizien, dass die Verwendung von C70 basierten Fullerenen eine gute Option zur Verbesserung des Wirkungsgrads von organischen Solarzellen sein kann, trotz der höheren Herstellungskosten. Die gefundenen Anionensignaturen auf den Fullerenen bieten einen weiteren Ansatz, die Anregungsabläufe in verschiedenen bulk-heterojunctions über spektroskopische Messungen nachzuvollziehen. Abschließend habe ich mit meinen Messungen an Lu3N@C80 einen generell zu beachtenden Effekt aufgezeigt, der bei der zukünftigen Synthese funktionaler Akzeptoren ähnlicher Art berücksichtigt werden sollte, um eine optimale Leistungsfähigkeit solcher Moleküle zu gewährleisten. Während die Projekte über die Dimer Akzeptoren und das Lu3N@C80 Molekül abgeschlossen wurden, sind bei der Untersuchung der Anionen, speziell auf großen Fullerenen, noch Fragen offen, und es wären zusätzliche Nachweise wünschenswert. Dies könnte mit spinsensitiven und zeitaufgelösten Messmethoden, die am Lehrstuhl vorhanden sind, an den hier schon vorgestellten Materialien erreicht werden. Eine weitere Möglichkeit wäre es zu versuchen, PC81$BM zu bekommen und dies zu untersuchen, auch in Gemischen mit noch mehr verschiedenen Polymeren mittels photoinduzierter Absorption.