Refine
Has Fulltext
- yes (14)
Is part of the Bibliography
- yes (14)
Document Type
- Journal article (8)
- Doctoral Thesis (4)
- Preprint (2)
Language
- English (14)
Keywords
- borylation (14) (remove)
Institute
Sonstige beteiligte Institutionen
EU-Project number / Contract (GA) number
- 669054 (2)
Herein, the copper-catalyzed borylation of readily available acyl chlorides with bis(pinacolato)diboron, (B\(_{2}\)pin\(_{2}\)) or bis(neopentane glycolato)diboron (B\(_{2}\)neop\(_{2}\)) is reported, which provides stable potassium acyltrifluoroborates (KATs) in good yields from the acylboronate esters. A variety of functional groups are tolerated under the mild reaction conditions (room temperature) and substrates containing different carbon-skeletons, such as aryl, heteroaryl and primary, secondary, tertiary alkyl are applicable. Acyl N-methyliminodiacetic acid (MIDA) boronates can also been accessed by modification of the workup procedures. This process is scalable and also amenable to the late-stage conversion of carboxylic acid-containing drugs into their acylboron analogues, which have been challenging to prepare previously. A catalytic mechanism is proposed based on in situ monitoring of the reaction between p-toluoyl chloride and an NHC-copper(I) boryl complex as well as the isolation of an unusual lithium acylBpinOBpin compound as a key intermediate.
The diborene 1 was synthesized by reduction of a mixture of 1,2-di-9-anthryl-1,2-dibromodiborane(4) (6) and trimethylphosphine with potassium graphite. The X-ray structure of 1 shows the two anthryl rings to be parallel and their π(C\(_{14}\)) systems perpendicular to the diborene π(B=B) system. This twisted conformation allows for intercalation of the relatively high-lying π(B=B) orbital and the low-lying π* orbital of the anthryl moiety with no significant conjugation, resulting in a small HOMO-LUMO gap (HLG) and ultimately an unprecedented anthryl B–B bond hydroarylation. The HLG of 1 was estimated to be 1.57 eV from the onset of the long wavelength band in its UV–vis absorption spectrum (THF, λ\(_{onset}\) = 788 nm). The oxidation of 1 with elemental selenium afforded diboraselenirane 8 in quantitative yield. By oxidative abstraction of one phosphine ligand by another equivalent of elemental selenium, the B–B and C\(^1\)–H bonds of 8 were cleaved to give the cyclic 1,9-diboraanthracene 9.
The first Borono-Strecker reaction has been developed to synthesize α-aminoboronates via a multicomponent reaction of readily available carbonyl compounds (aldehydes and ketones), amines and B2pin2. The preparation of α-amino cyclic boronates can be achieved via multicomponent coupling of salicylaldehydes, amines, and B2(OH)4. In addition, the diazaborole-based PBP pincer palladium chloride and the diazaborole-based PBP pincer palladium trifluoromethanesulfonate complexes were synthesized and fully characterized for the first time, and used as catalysts for Suzuki-Miyaura cross-coupling reactions.
We synthesized a series of new mono‐, di‐, tri‐ and tetra‐substituted perylene derivatives with strong bis(para‐methoxyphenyl)amine (DPA) donors at the uncommon 2,5,8,11‐positions. The properties of our new donor‐substituted perylenes were studied in detail to establish a structure‐property relationship. Interesting trends and unusual properties are observed for this series of new perylene derivatives, such as a decreasing charge transfer (CT) character with increasing number of DPA moieties and individual reversible oxidations for each DPA moiety. Thus, (DPA)‐Per possesses one reversible oxidation while (DPA)\(_{4}\)‐Per has four. The mono‐ and di‐substituted derivatives display unusually large Stokes shifts not previously reported for perylenes. Furthermore, transient absorption measurements of the new derivatives reveal an excited state with lifetimes of several hundred microseconds, which sensitizes singlet oxygen with quantum yields of up to 0.83.
Organoboron compounds, such as benzyl-, allyl-, allenyl-, vinyl-, and 2-boryl allyl-boronates, have been synthesized via metal-catalyzed borylations of sp3 C-O and C-H bonds. Thus, Cu-catalyzed borylations of alcohols and their derivatives provide benzyl-, allyl-, allenyl-, vinyl-, and 2-boryl allyl-boronates via nucleophilic substitution. The employment of Ti(OiPr)4 turns the OH moiety into a good leaving group (‘OTi’). The products of Pd-catalyzed oxidative borylations of allylic C-H bonds of alkenes were isolated and purified, and their application in the one-pot synthesis of stereodefined homoallyl alcohols was also investigated. Chapter 2 presents a copper-catalyzed synthesis of benzyl-, allyl-, and allenyl-boronates from benzylic, allylic, and propargylic alcohols, respectively, employing a commercially available catalyst precursor, [Cu(CH3CN)4]2+[BF4-]2, and Xantphos as the ligand. The borylation of benzylic alcohols was carried out at 100 oC with 5-10 mol % [Cu(CH3CN)4]2+[BF4-]2, which afforded benzylic boronates in 32%-95% yields. With 10 mol % [Cu(CH3CN)4]2+[BF4-]2, allylic boronates were provided in 53%-89% yields from the borylation of allylic alcohols at 60 or 100 oC. Secondary allylboronates were prepared in 72%-84% yields from the borylation of primary allylic alcohols, which also suggests that a nucleophilic substitution pathway is involved in this reaction. Allenylboronates were also synthesized in 72%-89% yields from the borylation of propargylic alcohols at 40 or 60 oC. This methodology can be extended to borylation of benzylic and allylic acetates. This protocol exhibits broad reaction scope (40 examples) and high efficiency (up to 95% yield) under mild conditions, including the preparation of secondary allylic boronates. Preliminary mechanistic studies suggest that nucleophilic substitution is involved in this reaction. Chapter 3 reports an efficient methodology for the synthesis of vinyl-, allyl-, and (E)-2-boryl allylboronates from propargylic alcohols via copper-catalyzed borylation reactions under mild conditions. In the presence of a commercially available catalyst precursor (Cu(OAc)2 or Cu(acac)2) and ligand (Xantphos), the reaction affords the desired products in up to 92% yield with a broad substrate scope (43 examples). Vinylboronates were synthesized in 50%-83% yields via Cu-catalyzed hydroboration of mono-substituted propargylic alcohols. With 1,1-disubstituted propargylic alcohols as the starting materials and Cu(OAc)2 as the catalyst precursor, a variety of allylboronates were synthesized in 44%-83% yields. The (E)-2-boryl allylboronates were synthesized in 54%-92% yields via the Cu-catalyzed diboration of propargylic alcohols. The stereoselectivity is different from the Pd(dba)2-catalyzed diboration of allenes that provided (Z)-2-boryl allylboronates predominantly. The isolation of an allenyl boronate as the reaction intermediate suggests that an SN2’-type reaction, followed by borylcupration, is involved in the mechanism of the diboration of propargylic alcohols. In chapter 4, a Pd-catalyzed allylic C-H borylation of alkenes is reported. The transformation exhibits high regioselectivity with a variety of linear alkenes, employing a Pd-pincer complex as the catalyst precursor, and the allylic boronate products were isolated and purified. This protocol can also be extended to one-pot carbonyl allylation reactions to provide homoallyl alcohols efficiently. An interesting mechanistic feature is that the reaction proceeds via a Pd(II)/Pd(IV) catalytic cycle. Formation of the Pd(IV) intermediate occurs by a unique combination of an NCNpincer complex and application of F-TEDA-BF4 as the oxidant. An important novelty of the present C-H borylation reaction is that all allyl-Bpin products can be isolated with usually high yields. This is probably a consequence of the application of the NCN-pincer complex as catalyst, which selectively catalyzes C-B bond formation avoiding subsequent C-B bond cleavage based side-reactions
The NaOtBu‐catalyzed mixed 1,1‐diboration of terminal alkynes using the unsymmetrical diboron reagent BpinBdan (pin = pinacolato; dan = 1,8‐diaminonaphthalene) proceeds in a regio‐ and stereoselective fashion affording moderate to high yields of 1,1‐diborylalkenes bearing orthogonal boron protecting groups. It is applicable to gram‐scale synthesis without loss of yield or selectivity. The mixed 1,1‐diborylalkene products can be utilized in Suzuki–Miyaura cross‐coupling reactions which take place selectivly at the C–B site. DFT calculations suggest the NaOtBu‐catalyzed mixed 1,1‐diboration of alkynes occurs through deprotonation of the terminal alkyne, stepwise addition of BpinBdan to the terminal carbon followed by protonation with tBuOH. Experimentally observed selective formation of (Z)‐diborylalkenes is supported by our theoretical studies.
We report herein the catalytic triboration of terminal alkynes with B\(_2\)pin\(_2\) (bis(pinacolato)diboron) using readily available Cu(OAc)\(_2\) and P\(^n\)Bu\(_3\). Various 1,1,2‐triborylalkenes, a class of compounds that have been demonstrated to be potential matrix metalloproteinase (MMP‐2) inhibitors, were obtained directly in moderate to good yields. The process features mild reaction conditions, a broad substrate scope, and good functional group tolerance. This copper‐catalyzed reaction can be conducted on a gram scale to produce the corresponding 1,1,2‐triborylalkenes in modest yields. The utility of these products was demonstrated by further transformations of the C−B bonds to prepare gem ‐dihaloborylalkenes (F, Cl, Br), monohaloborylalkenes (Cl, Br), and trans ‐diaryldiborylalkenes, which serve as important synthons and have previously been challenging to prepare.
The potassium salt of the boron-centred nucleophile B(CN)\(_{3}\)\(^{2-}\)(1) readily reacts with perfluorinated arenes, such as hexafluorobenzene, decafluorobiphenyl, octafluoronaphthalene and pentafluoropyridine, which results in KF and the K\(^{+}\) salts of the respective borate anions with one {B(CN)\(_{3}\)} unit bonded to the (hetero)arene. An excess of K\(_{2}\)1 leads to the successive reaction of two or, in the case of perfluoropyridine, even three C–F moieties and the formation of di- and trianions, respectively. Moreover, all of the 11 partially fluorinated benzene derivatives, C\(_{6}\)F\(_{6-n}\)H\(_{n}\) (n = 1–5), generally react with K\(_{2}\)1 to give new tricyano(phenyl)borate anions with high chemo- and regioselectivity. A decreasing number of fluorine substituents on benzene results in a decrease in the reaction rate. In the cases of partially fluorinated benzenes, the addition of LiCl is advantageous or even necessary to facilitate the reaction. Also, pentafluorobenzenes R–C\(_{6}\)F\(_{5}\) (R = –CN, –OMe, –Me, or –CF\(_{3}\)) react via C–F/C–B exchange that mostly occurs in the para position and to a lesser extent in the meta or ortho positions. Most of the reactions proceed via an S\(_{N}\)Ar mechanism. The reaction of 1,4-F\(_{2}\)C\(_{6}\)H\(_{4}\) with K\(_{2}\)1 shows that an aryne mechanism has to be considered in some cases as well. In summary, a wealth of new stable tricyano(aryl)borates have been synthesised and fully characterized using multi-NMR spectroscopy and most of them were characterised using single-crystal X-ray diffraction.
A nickel/N-heterocyclic carbene (NHC) catalytic system has been developed for the borylation of aryl sulfoxides with B\(_{2}\)(neop)\(_{2}\) (neop=neopentyl glycolato). A wide range of aryl sulfoxides with different electronic and steric properties were converted into the corresponding arylboronic esters in good yields. The regioselective borylation of unsymmetric diaryl sulfoxides was also feasible leading to borylation of the sterically less encumbered aryl substituent. Competition experiments demonstrated that an electron-deficient aryl moiety reacts preferentially. The origin of the selectivity in the Ni-catalyzed borylation of electronically biased unsymmetrical diaryl sulfoxide lies in the oxidative addition step of the catalytic cycle, as oxidative addition of methoxyphenyl 4-(trifluoromethyl)phenyl sulfoxide to the Ni(0) complex occurs selectively to give the structurally characterized complex trans-[Ni(ICy)\(_{2}\)(4-CF\(_{3}\)-C\(_{6}\)H\(_{4}\)){(SO)-4-MeO-C\(_{6}\)H\(_{4}\)}] 4. For complex 5, the isomer trans-[Ni(ICy)\(_{2}\)(C\(_{6}\)H\(_{5}\))(OSC\(_{6}\)H\(_{5}\))] 5-I was structurally characterized in which the phenyl sulfinyl ligand is bound via the oxygen atom to nickel. In solution, the complex trans-[Ni(ICy)\(_{2}\)(C\(_{6}\)H\(_{5}\))(OSC\(_{6}\)H\(_{5}\))] 5-I is in equilibrium with the S-bonded isomer trans-[Ni(ICy)\(_{2}\)(C\(_{6}\)H\(_{5}\))(SOC\(_{6}\)H\(_{5}\))] 5, as shown by NMR spectroscopy. DFT calculations reveal that these isomers are separated by a mere 0.3 kJ/mol (M06/def2-TZVP-level of theory) and connected via a transition state trans-[Ni(ICy)\(_{2}\)(C\(_{6}\)H\(_{5}\))(η\(^{2}\)-{SO}-C\(_{6}\)H\(_{5}\))], which lies only 10.8 kcal/mol above 5.
Alkylboronates play an important role in synthetic chemistry, materials science and drug discovery. They are easy to handle due to their good air and moisture stability, and can be readily employed to form carbon–carbon and carbon–heteroatom bonds and can be converted to various functional groups under mild reaction conditions. Compared with conventional groups, such as aryl (pseudo)halides or alcohols, organosulfur compounds represent an alternative and complimentary substitute in coupling reactions. The construction of C–B bond from C–SO bond of aryl sulfoxide is presented in Chapter 2. The selective cleavage of either alkyl(C)-sulfonyl or aryl(C)-sulfonyl bonds of an aryl alkyl sulfone via Cu-free or Cu-mediated processes generates the corresponding boronate esters, which are presented in Chapter 3 and Chapter 4. 1,2-Bis(boronate esters) are emerging as important synthetic intermediates for preparing 1,2-difunctional compounds. In addition, the boryl moieties in different environments in a 1,2-bis(boronate ester) can be differentiated and converted selectively, allowing the synthesis of a wide variety of complex molecules. A direct and selective diboration of C–X and C–O bonds for the preparation of 1,2-bis(boronate esters) is presented in Chapter 5.