Refine
Has Fulltext
- yes (21)
Is part of the Bibliography
- yes (21)
Year of publication
Document Type
- Doctoral Thesis (21)
Keywords
- HPLC (21) (remove)
Institute
Sonstige beteiligte Institutionen
Although the prevalence of substandard and counterfeit pharmaceutical products is a global problem, it is more critical in resource-constrained countries. The national medicines regulatory authorities (MNRA) in these countries have limited resources to cater for regular quality surveillance programmes aimed at ensuring that medicines in circulation are of acceptable quality. Among the reasons explained to hinder the implementation of these strategies is that compendial monographs are too complicated and require expensive infrastructures in terms of environment, equipment and consumables. In this study it was therefore aimed at developing simple, precise, and robust HPLC and HPTLC methods utilizing inexpensive, readily available chemicals (methanol and simple buffers) that can determine the APIs, other API than declared one, and which are capable of impurity profiling. As an outcome of this study, three isocratic and robust HPLC and two HPTLC methods for sulfadoxine, sulfalene, pyrimethamine, primaquine, artesunate, as well as amodiaquine have been developed and validated. All HPLC methods are operated using an isocratic elution mode which means they can be implemented even with a single pump HPLC system and standard C18 columns. The densitometric sulfadoxine/sulfalene and pyrimethamine method utilizes standard TLC plates as well as inexpensive, readily available and safe chemicals (toluene, methanol, and ethyl acetate), while that for artesunate and amodiaquine requires HPTLC plates as well as triethylamine and acetonitrile due to challenges associated with the analysis of amodiaquine and poorly the detectable artesunate. These HPTLC methods can be implemented as alternative to those requiring HPLC equipment e.g. in countries that already have acquired densitometer equipment. It is understood that HPTLC methods are less sensitive, precise and accurate when compared to HPLC methods, but this hindrance can easily be addressed by sending representative samples to third party quality control laboratories where the analytical results are verified using compendial HPLC methods on a regular basis.
It is therefore anticipated that the implementation of these methods will not only address the problem of limited resources required for medicines quality control but also increase the number of monitored targeted antimalarial products as well as the number of resource- constrained countries participating in quality monitoring campaigns. Moreover, the experiences and skills acquired within this work will be applied to other API groups, e. g. antibiotics, afterwards.
Im Rahmen der vorliegenden Arbeit wurden analytische Methoden zur Bestimmung des Verunreinigungsprofils von Erythromycin entwickelt, die der bestehenden Ph.Eur.-Methode überlegen sind. Die neue HPLC-Methode ist in der Lage, alle verwandten Verbindungen mit angemessener Präzision nachzuweisen und zu quantifizieren. Mit Hilfe der Massenspektrometrie konnten alle Hauptkomponenten und verwandten Verbindungen der Base, ihrer Ester und Salze eindeutig identifiziert und quantifiziert werden. Zudem konnten zwei neue verwandte Verbindungen von Erythromycin gefunden und als N,N-Didemethylerythromycin A und Anhydroerythromycin F identifiziert werden.
The charged aerosol detector (CAD) is an aerosol-based detector employed in liquid chromatography which has become established in the field of pharmaceutical analysis due to its outstanding performance characteristics, e.g. the almost uniform response for nonvolatile analytes. Owing to its principle of detection, the response of the CAD depends on the volatility of a compound and is inherently nonlinear. However, the newly implemented instrumental settings evaporation temperature and power function value (PFV) are valuable tools to overcome some of these drawbacks and can even enhance the detector’s capabilities when adjusted properly.
This thesis aimed to evaluate the impact of the new instrumental settings on the CAD performance. Additionally, the influence of modern separation techniques for small polar compounds on the CAD was assessed and the applicability of hyphenated UV-CAD techniques explored. The optimization strategies derived from the evaluation procedures and the conjunction of the instrumental and chromatographic techniques investigated were utilized for the challenging impurity profiling of amino acids and amino acid-like drugs.
The results of the method validation procedures confirmed the broad applicability of the CAD in the pharmaceutical analysis of nonvolatile compounds, supported by satisfactory sensitivity and reproducibility for meeting the regulatory requirements with respect to the ICH guidelines Q2(R1) and Q3A(R2). The limits of applicability include the analysis of semivolatile compounds, and the method transfer between current and legacy CAD models. Further advances in the definition and standardization of allowed ranges for the instrumental settings and the establishment of general optimization procedures in the method development could lead to a more widespread use of the detection technique in compendial methods.
Bei der Malignen Hyperthermie (MH) handelt es sich um eine autosomal-dominant vererbbare Erkrankung mit variabler Penetranz und Expressivität. Es kommt zu einem übermäßigen Calciumeinstrom in die Skelettmuskelzelle nach Triggerexposition aufgrund einer Fehlfunktion des verantwortlichen Ryanodinrezeptors (RYR1). Bei den bekannten Triggern handelt es sich um depolarisierende Muskelrelaxantien und volatile Anästhetika wie Halothan, aber auch andere Stoffe können diese Triggerfunktion ausüben. Das Phenolderivat Chlorocresol, ein in vielen Medikamenten gebräuchliches Konservierungsmittel, wird als fragliche Triggersubstanz bezüglich ihres Effektes auf die Skelettmuskulatur von MHS gegenüber MHN-Patienten im In-Vitro-Kontraktur-Test (IVCT) getestet. Zudem wurden mit der high pressure liquid chromatography (HPLC) die Serumkonzentrationen an Chlorocresol von Patienten gemessen, welche vor einer Bypassoperation eine definierte Menge eines chlorocresolhaltigen Heparinpräparates erhalten haben. Chlorocresol zeigt im IVCT eine signifikante Differenz zwischen MHN- und MHS-Patienten. Somit ließe sich dieser Stoff auch in der Diagnostik der MH einsetzen. Die Serumwerte von Chlorocresol bei Patienten, die eine definierte Dosis an chlorocresolhaltigen Heparin erhalten haben, lagen unter der Nachweisgrenze, welche wiederum deutlich unter der im IVCT gefundenen für eine Muskelkontraktur erforderlichen Mindestkonzentration an Chlorocresol lag. Folglich scheint keine Gefahr für MH-Träger, durch Gaben von üblichen Mengen an chlorocresolhaltigen Medikamenten eine MH-Krise auszulösen.
The requirements for the impurity profiling of substances for pharmaceutical use have become greater over time. They can be accomplished by the use of modern instrumental analysis techniques, which have been evolved in the last decades. New types of columns with HILIC, mixed-mode and chiral stationary phases are suitable for the separation of all kinds of substances mixtures, that were previously hardly possible with the use of common reversed phase columns. Modern, almost universal detectors like CAD, ELSD and CNLSD can be applied for a sensitive detection of substances without a chromophore. However, in addition to some small individual disadvantages to these methods, the costs are high and applications are still kind of rare. Thus, the introduction of these devices at a broader level has not yet taken place. While this presumably will change over time, there is a need for methods that enable the impurity profiling of challenging substances with widespread analytics devices.
Methionine is a substance with hydrophobic and hydrophilic impurities. With the help of a mixed-mode stationary phase, which is a combination of a reversed phase and a strong cationic exchanger, the separation of all putative impurities was found possible with good sensitivity and selectivity. The method requires apart from the column only standard isocratic HPLC equipment and was successfully validated.
The evaluation of the enantiomeric purity of amino acids is challenging. Two approaches were made. The first method utilizes CE by means of in-capillary derivation with OPA and the subsequent separation with a cyclodextrin. With the use of OPA/NAC and γ-cyclodextrin, a simple and cost-effective method for the indirect enantioseparation of 16 amino acids was developed. With the second approach, racemic amino acids can be analyzed with HPLC and in-needle derivatization. For this, different columns and chiral thiols were evaluated and the chromatographic parameters were optimized. A method with OPA/NIBLC, a pentafluorophenyl column made the enantioseparation of 17 amino acids feasible. A LOQ of the minor enantiomer down to 0.04 % can be achieved with UV spectrophotometric detection. A similar method was developed for impurity profiling of L-amino acids. This can be used alternatively for the amino acid analysis performed by the European Pharmacopoeia.
A simple, robust, precise and accurate method for the evaluation of impurities in glyceryl trinitrate solution was developed and validated. The four impurities of glyceryl trinitrate are separated by means of an acetonitrile-water gradient and the assay for this substance is also possible.
For the quality assurance of substances for pharmaceutical use, a variety of analytical techniques are available to address specific analytical problems. In this field of application, liquid chromatography (LC) stands out as the gold standard in the pharmaceutical industry. Various detectors can be employed, which are e.g. based on UV/Vis spectroscopy for the examination of molecules with a chromophore, or mass spectrometry (MS) for structural elucidation of analytes. For the separation of enantiomers, the use of capillary electrophoresis (CE) may be more favorable due to the high separation efficiency and easy-to-use and comparatively inexpensive chiral selectors, in contrast to chiral columns for LC, which are usually very expensive and limited to a restricted number of analytes. For structure elucidation in impurity profiling, one- and multidimensional 1H NMR spectroscopy is a valuable tool as long as the analyte molecule has got nuclei that can be detected, which applies for the magnitude of organic pharmaceutical substances.
For the evaluation of the amount of mineral oil aromatic hydrocarbons (MOAH) in various paraffin samples from different suppliers, a straightforward method based on 1H NMR spectroscopy was elaborated. The MOAH/MOSH ratio was used to indicate the amount of MOAH of paraffins and to evaluate the extent of refining. In addition, a representative paraffin sample was measured without sample solvent at high temperatures (about 340 K) to avoid the interfering residual solvent signals in the spectral regions of interest. The results of both methods were in good accordance.
Moreover, the 1H NMR results were complemented with the UV measurements from the purity testing of paraffins according to the DAB 8. Correlations of the NMR and UV spectroscopic data indicated a linear relationship of both methods for the determination of MOAH in paraffins.
Finally, the 1H NMR data was evaluated by principal component analysis (PCA) to explore differences within the paraffin samples and the spectral regions in the 1H NMR spectrum which are responsible for the formation of groups. It could be found that most variation is due to the MOSH of the paraffins. The PCA model was capable of differentiating between soft, liquid and solid paraffins on the one hand and between natural and synthetic liquid paraffins on the other hand.
The impurity profiling of L-ascorbic acid 2-phosphate magnesium (A2PMg) was performed by means of one- and two-dimensional NMR spectroscopy. Several ethylated impurities could be detected, which were likely to be formed during synthesis of A2PMg. The structures of two of the ethylated impurities were identified as ascorbic acid 2-phosphate ethyl ester and ethanol, (residual solvent from synthesis). NMR spectroscopic studies of the fractions obtained from preparative HPLC of A2PMg revealed two additional impurities, which were identified as phosphorylated derivatives of ascorbic acid, ascorbic acid 3,5-phosphate and ascorbic acid 5-phosphate.
Solid state mechanochemistry as an alternative approach for stress testing was applied on the drug substances S-Ibuprofen (Ibu) and Clopidogrel (CLP) using a ball mill, in order to study their degradation profile:
First, the isomerization of S-Ibu was investigated, which was stressed in the solid state applying several milling frequencies and durations under basic, acidic and neutral conditions. For the separation of Ibu enantiomers, a chiral CE method was developed and validated according to ICH Q2(R1). It was found that S-Ibu is overall very stable to isomerization; it shows minor conversion into the R-enantiomer under basic environment applying long milling times and high frequencies.
Last, the degradation profile of clopidogrel hydrogen sulfate (CLP) was investigated, which was stressed in the solid state under various oxidative conditions. An already existing HPLC-UV method was adjusted to sufficiently separate the degradation products, which were characterized by means of UV and MS/(MS) detection. Most of the degradation products identified were already reported to result from conventional CLP stress tests. The degradation profile of CLP was mainly influenced by the material of the milling jar and the type of catalyst used.
Assay and impurity profiling of the pharmaceuticals are the key routine quality control methods employed worldwide for which High Performance Liquid Chromatography (HPLC) is the most widely used technique. The ability to carry out these routine laboratory procedures in low- and middle- income countries (LMICs) need the methods to be based upon simple instruments manageable with moderate levels of personnel skill and costs involved.
Simple, convenient, and cost effective reverse phase HPLC methods were developed using phosphate buffer and methanol as mobile phase with C18 column as stationary phase for the impurity profiling and assay of beta lactam antibiotics. Isocratic elution and UV detection was employed in these methods. Impurity profiling method was developed for coamoxiclav tablets and ceftriaxone bulk drug. The method for ceftriaxone included a supplementary method to quantify one of its known impurity (Impurity D of ceftriaxone). This method involved use of acetonitrile where as the two main methods were achieved on the targeted method design, described above. With the exception of impurity A of ceftriaxone, the methods developed can successfully quantify impurities to the concentration as low as ≤0.05%, which is in accordance with the current guidelines for the impurity profiling of antibiotics issued by European Medicines Agency.
As ensuring cost reduction was one of the key objectives of carrying out the method development exercise, in situ methods for the preparation of impurities were also identified and some new methods were introduced. The stability of beta lactam antibiotics and the choice of solvent were given due attention during the process of method development revealing information on the presence of new impurities. Deacetyl cefotaxime and 2-mercaptobenzathiazole were identified in this process as new impurities of ceftriaxone currently not listed under known impurities by United States Pharmacopoeia and European Pharmacopoeia. However, deacetyl cefotaxime is a known impurity of cefotaxime whereas the latter molecule is a degradation product of one of the synthesis impurities of ceftriaxone. This substance is reported to be carcinogenic and is resolved using the supplementary method developed for ceftriaxone, hence making its detection and quantification possible. A known inactive impurity of ceftriaxone (Impurity A, E-isomer of ceftriaxone) was` also shown to be produced by exposure to day light, thus warranting the light protection of the ceftriaxone solution, an information that is of critical importance in the clinical settings.
A series of experimentation was carried out on the finished products of beta lactam antibiotics sampled from Pakistan and few other countries, to identify key quality issues in the samples. Though the limited sample size and convenient sampling did not provide results that could yield a decisive figure for the country status for prevalence of substandard and falsified medical products, but the experiments have clearly indicated that the problems in drug quality do exist and beta lactam antibiotics form a class of high-risk medicine with respect to surveillance for poor-quality medicines. Isolation of unknown impurities was also carried out along with the introduction of new and modified methods for preparation of impurities of beta-lactam antibiotics.
In addition, detailed literature survey was carried out for understanding the complex problem of the poor-quality medicine, impact of poor quality antimicrobials on health care system and the magnitude of the problem at the global level. The country status of Pakistan regarding quality of medicines was recorded based upon the available documentary evidence. The current technologies and strategic options available for low- and middle-income countries in aiding fight for combating poor quality medicines was also laid down to design recommendations for Pakistan. A comprehensive review of the information technology tools used for identification and control of substandard and falsified medicines was also conducted.
Effekte eines standardisierten Kiefernrindenextraktes und dessen Metabolit auf NO und NO-Synthasen
(2012)
Um die Grundlagen für die in klinischen Studien beim Einsatz des standardisierten Kiefernrindenextraktes (Pycnogenol®) gefundenen Effekte auf einer mechanistischen zellulären Ebene aufzuklären, wurde in der hier vorliegenden Arbeit der Einfluss der Komponenten des Extraktes und dessen Metabolit M1 (chemisch benannt δ-(3,4-Dihydroxyphenyl)-γ-valerolacton bzw. 5 (3,4 Dihydroxybenzyl)dihydrofuran 2(3H) on) hinsichtlich der Wirkung auf Stickstoffmonoxid(= NO)-produzierende Systeme untersucht. NO ist an einer Vielzahl von physiologischen und pathophysiologischen Prozessen in lebenden Organismen beteiligt. Im Menschen sind bislang drei NO-Synthasen bekannt: die induzierbare (iNOS), die hinsichtlich der Pathologie vor allem mit entzündlichen Vorgängen assoziiert wird, die endotheliale (eNOS), die bei Gefäß- und Herzkreislauferkrankungen eine Rolle spielt, und die neuronale (nNOS), die mit der Gedächtnisbildung, aber auch mit zytotoxischen Prozessen im Gehirn etwa bei Morbus Alzheimer oder der Parkinson-Krankheit in Verbindung gebracht wird. Der nach peroraler Einnahme des Extraktes im Darm durch metabolisierende Kolonbakterien entstehende und darauf im Plasma erscheinende Metabolit M1, dem bei allen durchgeführten Untersuchungen besonderes Augenmerk zuteil wurde, zeigte eine starke konzentrationsabhängige Inhibierung der NO-Freisetzung der iNOS aus einer durch einen Entzündungsreiz stimulierten murinen Makrophagenzellkultur (IC50= 1,28 µg/mL). Im Vergleich mit Fraktion I des Kiefernrindenextraktes, die vor allem monomere Extraktbestandteile enthält, und Hydrocortison zeigte M1 zusätzlich einen stärkeren Hemmeffekt auf die NO-Freisetzung nach dem Entzündungsreiz. Die Zytotoxizität von M1 im Testsystem war dabei als gering einzustufen. Interessanterweise wurde neben den NO-Radikalfängereigenschaften von M1 auch ein deutlich hemmender konzentrationsabhängiger Effekt auf die iNOS-Proteinexpression gefunden (IC50= 3,78 µg/mL). Da die bislang im Plasma bestimmten M1-Konzentrationen deutlich geringer als die in Zellkulturversuchen wirksamen waren, wurde eine mögliche Anreicherung von M1 in Gegenwart von Serumproteinen in humanen Endothelzellen, primären Monozyten und murinen Makrophagen untersucht. Dabei wurde eine starke Bindung von M1 an die Zellen gezeigt und Hinweise für eine potentiell erleichterte Aufnahme von M1 durch membranständige Transporter unter Einsatz eines Influx-Hemmers (Phloretin) gefunden. Zur Untersuchung der eNOS, die sehr geringe Mengen NO produziert, wurden neue methodische Ansätze entwickelt. In diesem Zusammenhang wurden zuvor unbekannte Fallstricke bei der Verwendung der Fluoreszenzsonde DAF-2 (4,5-Diaminofluorescein) zur NO-Detektion und dem Einsatz unterschiedlicher Detektionssysteme entdeckt. DAF-2 zeigte unter verschiedenen Bedingungen auch ohne extern zugegebene NO-Quelle und besonders beim Einfrieren/Auftauen unerwarteterweise eine Konversion zum korrespondierenden NO-Addukt (DAF-2T). Die eingesetzten monomeren Testsubstanzen ((+)-Catechin, (-)-Epicatechin, Resveratrol, M1) waren über die Testzeiträume deutlich instabil mit dynamischer Eigenfluoreszenz. Sowohl über kurze (≤ 45 min) als auch über längere Zeiträume (14-20 h) wurde entsprechend der Redoxaktivität der eingesetzten Polyphenole eine konzentrationsabhängige scheinbar hemmende Wirkung auf die extrazelluläre NO-Freisetzung der eNOS gezeigt. Die eNOS-Proteinexpression blieb durch die verwendeten Monomere weitestgehend unbeeinflusst. Durch eine hohe Konzentration der Fraktion I des Kiefernrindenextraktes wurde eine Steigerung der eNOS-Proteinkonzentration in Endothelzellen gefunden, wobei zytotoxische Artefakte dabei nicht auszuschließen waren. Als kompetitive endogene Inhibitoren der NOS wurden in vivo in jüngster Zeit methylierte Arginine (ADMA= asymmetrisches, SDMA= symmetrisches Dimethylarginin) entdeckt. In einer randomisierten, kontrollierten, doppelt-blinden klinischen Studie mit einem Cross-over Design am Universitätsklinikum Zürich mit 28 Patienten, die an einer koronaren Herzerkrankung litten, wurden die Plasmaspiegel methylierter Arginine vor und nach 8 wöchiger Einnahme des Kiefernrindenextraktes bestimmt. Es zeigte sich dabei trotz einer Verbesserung der flussinduzierten Gefäßerweiterungskapazität (Flow-mediated dilation) und Verringerung der 15-F2t-Isoprostan-Plasmaspiegel keine signifikante Veränderung der Plasmakonzentrationen von ADMA, SDMA und ET-1 (Endothelin-1) durch die Einnahme des Extraktes. Die nNOS kommt vor allem im Gehirn, aber auch in Muskelzellen vor. Der Einsatz des Metaboliten M1 führte zu keinen deutlichen Effekten auf die konstitutive nNOS-Expression in einem Rhabdomyosarkom(A-673)-Zellkulturmodell. Zur Beantwortung der Frage, wie wahrscheinlich es ist, dass zur möglichen Beeinflussung von (patho)-physiologischen zerebralen Prozessen Polyphenole in vivo das Gehirn erreichen, wurde erstmals ein in silico-Modell zur Vorhersage der Verteilung von ausgewählten polyphenolischen Substanzen zwischen Blut und Gehirn entwickelt. Damit wurde anschließend eine Reihenfolge mit logBB-Werten (logarithmierter Quotient aus Konzentration im Blut und im Gehirngewebe) geordnet nach einer entsprechend dem Modell wahrscheinlich höheren Verteilung ins Gehirn für die untersuchten Substanzen berechnet: Protocatechusäure < Quercetin < Cyanidin < (+) Catechin < (-)-Epicatechin < Phloretin < M1. Insgesamt schienen die untersuchten polyphenolischen Substanzen eher schwach bluthirnschrankengängig zu sein. Der Metabolit M1 zeigte den höchsten logBB-Wert und somit die höchste Wahrscheinlichkeit der untersuchten Polyphenole, die Blut-Hirnschranke in vivo zu überwinden. Im Kontext einer möglichen Anwendung bei chronisch-entzündlichen Erkrankungen wurde zusätzlich ein Extrakt aus der Frucht von Morinda citrifolia L. in einem primären Monozyten-Zellkulturmodell auf seine Eigenschaften hin die Sekretion der Matrix-Metalloprotease-9 (MMP-9) aus Immunzellen nach einem Entzündungsreiz zu beeinflussen untersucht. Dabei zeigten die Extraktverdünnungen deutliche konzentrationsabhängige Hemmeffekte um bis zu ~50 % der maximalen MMP-9 Sekretion, die mit dem Einsatz von Hydrocortison vergleichbar waren. Somit konnten in der vorliegenden Arbeit neue Beiträge zur Wirkungsweise der untersuchten Pflanzenextrakte und vor allem zum Verständnis der möglichen Effekte von Polyphenolen auf physiologisch relevante NO-Systeme sowie zur methodischen Wissenserweiterung der komplexen NO-Analytik geleistet werden.
In der Promotion wird die Entwicklung, Optimierung und Validierung einer Reversed-phase-Chromatography Methode zur Messung des Ribavirinplasmaspiegels beschrieben. Diese wurde mit einer Solid Phase Extraction zur Probenvorbereitung kombiniert. Zudem finden sich zahlreiche Auswertungen von gemessenen Patienenchromatogrammen zu ausgewählten, klinisch relevanten Fragestellungen, wie beispielsweise die Darstellung des Ribavirinplasmaspiegels im Tagesverlauf, im Verlauf der ersten sechs Therapiewochen, im Vergleich von Männern und Frauen, sowie bei einem niereninsuffizienten Patienten. Zu den erhobenen Ergebnissen wird Stellung genommen, und daraus resultierende Schlussfolgerungen bezüglich einer zukünftigen Optimierung der Hepatitis-C-Therapie kommentiert.
Im Rahmen dieser Arbeit wurden sehr einfache, flüssigchromatographische Methoden zur Qualitätsanalytik gebräuchlicher Antimalaria-Medikamente (Amodiaquin, Mefloquin, Proguanil sowie die Kombination Artemether/Lumefantrin) entwickelt, die nur wenige, günstig erhältliche Chemikalien (Phosphatpuffer, Methanol) sowie gewöhnliche, kommerzielle RP-18-Säulen benötigen. Sie sind insbesondere zur Anwendung in Laboratorien in Entwicklungsländern geeignet und erfordern keine komplexen HPLC-Instrumente wie beispielsweise Gradientenpumpen oder Säulenthermostate. Der Verzicht auf Ionenpaarreagenzien ermöglicht es, dass eine stationäre Phase für mehr als nur einen einzigen Einsatzzweck verwendet werden kann und dass langwierige Äquilibrier- bzw. Spülschritte nicht notwendig sind. Alle Methoden arbeiten im isokratischen Elutionsmodus und durch die Verwendung kurzer Säulen (125 mm) konnten die jeweiligen Analysenzeiten zusätzlich verringert werden. Hierdurch ist zudem eine Reduzierung des Fließmittelverbrauches möglich.
Während der Methodenentwicklung wurden charakteristische, aus dem Herstellungsweg des jeweiligen Arzneistoffes stammende potentielle Verunreinigungen berücksichtigt. Ihre Bestimmung erlaubt eine Aussage über die Herkunft eines Wirkstoffes bzw. eines Arzneimittels, da das Verunreinigungsmuster einer Substanz oftmals die Zuordnung zu einem bestimmten Herstellungs- bzw. Reinigungsprozess ermöglicht.
Alle Methoden wurden hinsichtlich der Linearität innerhalb des Arbeitsbereiches sowie der Wiederholpräzision charakterisiert. Es wurde eine gute Reproduzierbarkeit gefunden. Die Nachweis- und Bestimmungsgrenzen der untersuchten Verunreinigungen lagen bei einem Level von je 0.1 %. Durch gezielte Variation wurde der Einfluss wechselnder Trenntemperaturen sowie schwankender pH-Werte der jeweiligen mobilen Phase und die hieraus resultierenden Effekte untersucht. Hierbei zeigte sich, dass die Methoden sehr robust gegenüber diesen Einflussgrößen sind und somit für die Anwendung mit einfach ausgestatteten HPLC-Systemen sowie besonders für den Einsatz in tropische Gebieten mit wechselnden klimatischen Bedingungen gut geeignet sind.
Flüssigchromatographische Methoden spielen heute in der pharmazeutischen Analytik vor allem zur Bestimmung der Reinheit eines Arzneistoffes eine herausragende Rolle und sind in nahezu jeder Monographie der wichtigsten Arzneibücher (z. B. im Ph. Eur.) zu finden. Einfach durch-führbare Untersuchungsmethoden, wie beispielsweise die im GPHF-Minilab® angewandte Dünnschichtchromatographie, erfordern im Vergleich zur HPLC weniger komplexe und teure Instrumente und können selbst in entlegenen Gebieten ohne Laboratorium durchführt werden. Sie verfügen allerdings über eine nur sehr geringe Genauigkeit und Reproduzierbarkeit, da sowohl die praktische Durchführung als auch die anschließende Auswertung rein manuell bzw. visuell erfolgt und somit in hohem Maße einer Beeinflussung durch den jeweiligen Analytiker unterworfen ist. Die entwickelten HPLC-Methoden wurden mit dünnschichtchromatographischen Verfahren verglichen, hierbei besonders unter dem Aspekt der visuellen und der instrumentellen Auswertung der Chromatogramme zur Bestimmung des Gehaltes einer unbekannten Probe. Hierbei konnte aufgezeigt werden, dass die Dünnschichtchromatographie der Flüssigchromatographie eindeutig unterlegen ist, insbesondere wenn die Auswertung nicht mittels eines entsprechenden Scanners sondern rein visuell erfolgt: Nur in den wenigsten Fällen ist es möglich, eine annähernd präzise Aussage über den Gehalt zu treffen und zudem ist die Bestimmung der Verwandten Substanzen nur sehr bedingt möglich. Durch den Einsatz von Auftragegeräten bzw. Plattenscannern kann die Genauigkeit zwar signifikant erhöht werden, allerdings sind solche Instrumente im Verhältnis wesentlich teurer als einfache, modulare HPLC-Systeme und zählen heute in den wenigsten Laboratorien zum Standardinventar.
Vereinfachte chromatographische Methoden können ein wichtiges Hilfsmittel für Kontrolllaboratorien in Entwicklungsländern sein, wenn komplexe, etablierte Protokolle nur eingeschränkt angewendet werden können. Durch die Kombination aus dünnschichtchromatographischer Basisanalytik und einer flächendeckenden Untersuchung mittels HPLC lässt sich die Arzneimittelqualität sehr gut überprüfen, die regulatorischen Organe eines Landes entsprechend zu entlasten und die Versorgung der Bevölkerung mit qualitativ einwandfreien Medikamenten zu gewährleisten.
Ein weiterer Teil der Arbeit befasst sich mit der Stabilitätsanalytik individuell hergestellter, Noradrenalin-haltiger Injektionslösungen. Solche Rezepturen werden oftmals in Krankenhausapotheken im Rahmen der Defektur auf Vorrat durch Verdünnen der entsprechenden kommerzieller Fertigarzneimittel mit isotonischer Kochsalzlösung zubereitet, um z. B. für Notfallsituationen am Wochenende die Rezepturen vorrätig zu haben. Durch die Untersuchungen wurde geprüft, inwieweit der übliche Verdünnungsgrad von 0.1 % einen Einfluss auf die Stabilität des Noradrenalins hat und welche Lagerungsbedingungen für die Zubereitungen empfohlen werden können. Nach der Lagerung unter verschiedenen Bedingungen (gekühlt, bei Raumtemperatur sowie jeweils mit bzw. ohne Lichtschutz) konnte gezeigt werden, dass die Gehalte an Noradrenalin bei keiner der untersuchten Lagerungsbedingungen unter einen Wert von 99.0 % fielen. Individuell hergestellte Noradrenalin-Injektionslösungen können somit bis zu sieben Tage im Voraus hergestellt und für die Anwendung am Patienten bereit gehalten werden. Die Lösungen sollten dennoch gekühlt und unter Lichtschutz aufbewahrt werden, um den Abbau des Arzneistoffes und eine mikrobielle Kontamination zu minimieren.