Refine
Has Fulltext
- yes (16)
Is part of the Bibliography
- yes (16)
Year of publication
Document Type
- Doctoral Thesis (16)
Keywords
- Molekulardynamik (16) (remove)
The subject of this work has been the investigation of dynamical processes that occur during and after the interaction of matter with pulses of femtosecond laser radiation. The experiments presented here were performed in the gas phase and involve one atomic and several model molecular systems. Absorption of femtosecond laser radiation by these systems induces an electronic excitation, and subsequently their ionization, photofragmentation or isomerization. The specific adjustment of the excitation laser field properties offers the possibility to manipulate the induced electronic excitation and to influence the formation of the associated photoproducts. From the perspective of the employed spectroscopic methods, the development of photoelectron spectroscopy and its implementation in laser control experiments has been of particular interest in this thesis. This technique allows for a most direct and intuitive observation of electronic excitation dynamics in atomic as well as in complex polyatomic molecular systems. The propagation of an intermediate electronic transient state, associated to the formation of a particular photoproduct, can be interrogated by means of its correlation to a specific state of the atomic or molecular continuum. Such correlations involve the autoionization of the transient state, or by means of a second probe laser field, a structural correlation, as summarized by the Koopman's theorem (section 2.4.1). The technique of adaptive femtosecond quantum control has been the subject of development in our group for many years. The basic method, by which the temporal profile of near-infrared laser pulses at a central wavelength of 800 nm, can be adjusted, is a programmable femtosecond pulse-shaper that comprises of a zero dispersion compressor and a commercial liquid crystal modulator (LCD). This experimental arrangement was realized prior to this thesis and served as a starting point to extend the pulse-shaping technique to the ultraviolet spectral region. This technological development was realized for the purposes of the experiments presented in Chapter 5. It involves a combination of the LCD-pulse-shaper with frequency up-conversion techniques on the basis of producing specifically modulated laser pulses of central wavelength 266 nm. Furthermore, the optical method X-FROG had to be developed in order to characterize the often complex structure of generated ultraviolet pulses. In the adaptive control experiments presented in this work, the generated femtosecond laser pulses could be automatically adjusted by means of specifically addressing the 128 independent voltage parameters of the programmable liquid-crystal modulator. Additionally a machine learning algorithm was employed for the cause of defining laser pulse-shapes that delivered the desired (optimal) outcome in the investigated laser interaction processes. In Chapter 4, the technique of feedback-controlled femtosecond pulse shaping was combined with time-of-flight mass spectroscopy as well as photoelectron spectroscopy in order to investigate the multiphoton double ionization of atomic calcium. A pronounced absolute enhancement of the double ionization yield was obtained with optimized femtosecond laser pulses. On the basis of the measured photoelectron spectra and of the electron optimization experiments, a non-sequential process was found, which plays an important role in the formation of doubly charged Calcium ions. Then in Chapter 5, the dynamics following the pp* excitation of ethylene-like molecules were investigated. In this context, the model molecule stilbene was studied by means of femtosecond photoelectron spectroscopy. Due to the simplicity of its chemical structure, stilebene is one of the most famous models used in experimental as well as theoretical studies of isomerization dynamics. From the time-resolved experiments described in that chapter, new spectroscopic data involving the second excited electronic state S2 of the molecule were acquired. The second ethylenic product was the molecule tetrakis (dimethylamino) ethylene (TDMAE). Due to the presence of numerous lone pair electrons on the four dimethylamino groups, TDMAE exhibits a much more complex structure than stilbene. Nevertheless, previously reported studies on the dynamics of TDMAE provided vital information for planning and conducting a successful optimisation control experiment of the wavepacket propagation upon the (pp*) S1 excited potential surface of the molecule. Finally, in Chapter 6 the possibility of employing femtosecond laser pulses as an alternative method for activating a metallocene molecular catalyst was addressed. By means of an adaptive laser control scheme, an optimization experiment was realized. There, the target was the selective cleavage of one methyl-ligand of the model catalyst (Cp)^2Zr(CH3)^2, which induces a catalytic coordination position on the molecule. The spectroscopic studies presented in that chapter were performed in collaboration to the company BASF A.G. and constitute a proof-of principle attempt for a commercial application of the adaptive femtosecond quantum control technique.
In dieser Arbeit wurden zwei Aspekte der Femtochemie mit den Methoden der Femtosekunden--Laserspektroskopie untersucht. Dabei wurden folgende Ziele verfolgt: Einerseits sollte die jüngst entwickelte Technik der adaptiven Pulsformung auf das Problem bindungsselektiver Photodissoziationsreaktionen angewandt werden, zum Anderen bestand die Aufgabe darin, die nichtadiabatische, photoinduzierte Dynamik am Beispiel der Photoisomerisierung von Stilben mit Hilfe der Photoelektronenspektroskopie zeitaufgelöst zu untersuchen. Die Methode der adaptiven Pulsformung wurde mit dem Ziel eingesetzt, eine bindungsselektive Photodissoziation zu verwirklichen. Dazu wurde diese Technik in Verbindung mit einem massenspektroskopischen Nachweis der Photofragmente verwendet. Die Experimente wurden an einigen Spezies der Methylhalogenide CH2XY (X,Y = Halogen) durchgeführt. Diese Verbindungen wurden als Modellsysteme gewählt, da sich gezeigt hat, dass auf Grund stark gekoppelter konkurrierender Dissoziationskanäle durch modenselektive Laseranregung keine Kontrolle erreicht werden kann. Mit dem hier durchgeführten Experiment an CH2ClBr wurde erfolgreich erstmals die Anwendung der adaptiven Femtosekunden-Pulsformung auf das Problem einer bindungsselektiven Photodissoziation demonstriert. Dabei konnte eine Steigerung der Dissoziation der stärkeren Kohlenstoff-Halogen Bindung um einen Faktor zwei erreicht werden. Weiterhin konnte experimentell gezeigt werden, dass das optimierte Produktverhältnis nicht durch eine einfache Variation der Laserpulsdauer oder Laserpulsenergie erzielt werden kann. Es wurde ein möglicher Mechanismus für die Kontrolle diskutiert, der im Gegensatz zu einem unmodulierten Laserpuls die Wellenpaketdynamik auf neutralen dissoziativen Potentialflächen zur Steuerung des Produktverhältnisses involviert. Wie sich aus einer genaueren Analyse des Fragmentspektrums ergab, wird durch den optimalen Laserpuls die Dissoziation in komplexer Weise moduliert. Dies zeigte sich z.B. auch durch eine Änderung des Isotopenverhältnisses in der Ausbeute des dissoziierten Br-Liganden vor und nach der Optimierung. Dieser Frage nach einer isotopenselektiven Photodissoziation wurde in einem weiteren Experiment an CH2Br2 nachgegangen. Dabei konnte jedoch nur eine geringe Variation von etwa fünf Prozent gegenüber dem natürlichen Isotopenverhältnis festgestellt werden. Als größtes experimentelles Problem stellte sich dabei die starke Intensitätsabhängigkeit der Produktausbeuten heraus, was die Suche nach der optimalen Pulsform stark einschränkte. Anhand des molekularen Photodetachments CH2I2-->CH2+I2 wurde gezeigt, dass durch die Analyse der optimalen Pulsformen Informationen über die Dynamik dieses Prozesses gewonnen werden können. Dazu wurde zunächst in einem Pump-Probe-Experiment die Dynamik der I2-Fragmentation nach einer Mehrphotonen-Anregung von CH2I2 mit 266nm Laserpulsen untersucht. Dieses Experiment ergab, dass das Molekül über einen angeregten Zwischenzustand auf einer sehr schnellen Zeitskala über Dissoziationskanälen zerfallen kann. Der dominante Kanal führt zu einer sequentiellen Abgabe einer der I-Liganden und resultiert in den Photoprodukten CH2I und I Im anderen Kanal, dem molekularen Photodetachment, werden die Photoprodukte I2 und CH2 gebildet. In einem Kontrollexperiment wurde dann versucht, das molekulare Photodetachment gegenüber dem dominanten sequentiellen Kanal mit geformten 800nm Laserpulsen zu optimieren. Es wurden Optimierungen mit dem Ziel der Maximierung der Ausbeute an den Photoprodukten I2 und CH2 gegenüber CH2I durchgeführt. Diese Experimente ergaben, dass für beide Fragmente des molekularen Photodetachments eine Steigerung des Produktverhältnisses um etwa einen Faktor drei möglich ist. Dabei zeigte sich, dass eine Maximierung auf ein Produktverhältnis (z.B. I2/CH2I) eine Steigerung des anderen um etwa den gleichen Faktor hervorruft. Dies ist ein deutlicher Hinweis, dass beide Photoprodukte über denselben Dissoziationskanal gebildet werden. Ein weiterer inweis wurde aus der Analyse der optimalen Pulsformen erhalten: In beiden Fällen weisen diese eine markante Doppelpulsstruktur mit einem zeitlichen Abstand von etwa 400fs auf. Dies erinnert stark an die Situation des Pump-Probe--Experiments, wo durch die Analyse des transienten Signals ebenfalls eine optimale Verzögerungszeit zwischen dem Pump- und Probe-Laserpuls von etwa 400fs ermittelt werden konnte, bei der die Produktverhältnisse gerade maximal sind. Im Vergleich zur Massenspektroskopie liefert die Photoelektronenspektroskopie in der kinetischen Energie der Photoelektronen eine zusätzliche Messgröße, die direkt Informationen über die Kerngeometrie des Systems liefern kann. Mit dieser Technik wurde die trans-cis-Photoisomerisierung von Stilben im ersten elektronisch angeregten Zustand S1(1Bu) zeitaufgelöst untersucht. Dabei ging es speziell um die Frage nach der Existenz eines weiteren 1Bu Zustandes, der in neueren theoretischen Untersuchungen diskutiert wurde. In einem Pump-Probe-Experiment wurde dazu das im Molekularstrahl präparierte trans-Stilben durch einen 266nm Laserpuls angeregt und die Dynamik durch einen weiteren 266nm Laserpuls abgefragt. Im Photoelektronenspektrum konnten zwei signifikante Beiträge mit unterschiedlicher Dynamik gefunden werden. Das transiente Signal des ersten Beitrags weist eine Zeitkonstante von etwa 20ps auf und konnte eindeutig der Isomerisierung des S1 Zustandes zugeordnet werden. Im Gegensatz dazu zeigte das Signal des zweiten Beitrags eine Zeitkonstante von 100fs. Dieses Signal könnte aus der Ionisation des S2 Zustandes resultieren, welcher bislang experimentell nicht beobachtet werden konnte.
\textbf{Molecular Determinants of Drug-Target Residence Times of Bacterial Enoyl-ACP Reductases.} Whereas optimization processes of early drug discovery campaigns are often affinity-driven, the drug-target residence time $t_R$ should also be considered due to an often strong correlation with \textit{in vivo} efficacy of compounds. However, rational optimization of $t_R$ is not straightforward and generally hampered by the lack of structural information about the transition states of ligand association and dissociation. The enoyl-ACP reductase FabI of the fatty acid synthesis (FAS) type II is an important drug-target in antibiotic research. InhA is the FabI enzyme of \textit{Mycobacterium tuberculosis}, which is known to be inhibited by various compound classes. Slow-onset inhibition of InhA is assumed to be associated with the ordering of the most flexible protein region, the substrate binding loop (SBL). Diphenylethers are one class of InhA inhibitors that can promote such SBL ordering, resulting in long drug-target residence times. Although these inhibitors are energetically and kinetically well characterized, it is still unclear how the structural features of a ligand affect $t_R$.
Using classical molecular dynamics (MD) simulations, recurring conformational families of InhA protein-ligand complexes were detected and structural determinants of drug-target residence time of diphenyl\-ethers with different kinetic profiles were described. This information was used to deduce guidelines for efficacy improvement of InhA inhibitors, including 5'-substitution on the diphenylether B-ring. The validity of this suggestion was then analyzed by means of MD simulations.
Moreover, Steered MD (SMD) simulations were employed to analyze ligand dissociation of diphenylethers from the FabI enzyme of \textit{Staphylococcus aureus}. This approach resulted in a very accurate and quantitative linear regression model of the experimental $ln(t_R)$ of these inhibitors as a function of the calculated maximum free energy change of induced ligand extraction. This model can be used to predict the residence times of new potential inhibitors from crystal structures or valid docking poses.
Since correct structural characterization of the intermediate enzyme-inhibitor state (EI) and the final state (EI*) of two-step slow-onset inhibition is crucial for rational residence time optimization, the current view of the EI and EI* states of InhA was revisited by means of crystal structure analysis, MD and SMD simulations. Overall, the analyses affirmed that the EI* state is a conformation resembling the 2X23 crystal structure (with slow-onset inhibitor \textbf{PT70}), whereas a twist of residues Ile202 and Val203 with a further opened helix $\alpha 6$ corresponds to the EI state. Furthermore, MD simulations emphasized the influence of close contacts to symmetry mates in the SBL region on SBL stability, underlined by the observation that an MD simulation of \textbf{PT155} chain A with chain B' of a symmetry mate in close proximity of the SBL region showed significantly more stable loops, than a simulation of the tetrameric assembly. Closing Part I, SMD simulations were employed which allow the delimitation of slow-onset InhA inhibitors from rapid reversible ligands.
\textbf{Prediction of \textit{Mycobacterium tuberculosis} Cell Wall Permeability.} The cell wall of \textit{M. tuberculosis} hampers antimycobacterial drug design due to its unique composition, providing intrinsic antibiotic resistance against lipophilic and hydrophilic compounds. To assess the druggability space of this pathogen, a large-scale data mining endeavor was conducted, based on multivariate statistical analysis of differences in the physico-chemical composition of a normally distributed drug-like chemical space and a database of antimycobacterial--and thus very likely permeable--compounds. The approach resulted in the logistic regression model MycPermCheck, which is able to predict the permeability probability of small organic molecules based on their physico-chemical properties. Evaluation of MycPermCheck suggests a high predictive power. The model was implemented as a freely accessible online service and as a local stand-alone command-line version.
Methodologies and findings from both parts of this thesis were combined to conduct a virtual screening for antimycobacterial substances. MycPermCheck was employed to screen the chemical permeability space of \textit{M. tuberculosis} from the entire ZINC12 drug-like database. After subsequent filtering steps regarding ADMET properties, InhA was chosen as an exemplary target. Docking to InhA led to a principal hit compound, which was further optimized. The quality of the interaction of selected derivatives with InhA was subsequently evaluated using MD and SMD simulations in terms of protein and ligand stability, as well as maximum free energy change of induced ligand egress. The results of the presented computational experiments suggest that compounds with an indole-3-acethydrazide scaffold might constitute a novel class of InhA inhibitors, worthwhile of further investigation.
Die vorliegende Arbeit beschreibt die Durchführung computergestützter Untersuchungen an den Wildtyp-Kristallstrukturen dieses Enzyms – einerseits zur Suche nach neuen Inhibitoren im Rahmen von virtuellen Screening- (VS-) Studien, andererseits zur Charakterisierung der strukturellen Flexibilität mit Hilfe von Molekulardynamik- (MD-) Simulationen. Für ein erstes VS wurde zunächst eine Datenbank von mehreren Millionen kommerziell erhältlichen Verbindungen mit Arzneistoff-ähnlichen physikochemischen Eigenschaften erstellt. Als Ausgangspunkt der Screening-Studie diente ein Teildatensatz, welcher mit Hilfe eines auf dem nativen Bindemodus des KasA-Inhibitors Thiolactomycin (TLM) beruhenden Pharmakophormodells erhalten wurde. Diese Verbindungen wurden in die Bindetasche von KasA gedockt und die Qualität der erhaltenen Posen in einem Re- und Konsensus-Scoring-Verfahren bewertet. Schließlich wurden 14 Substanzen käuflich erworben und im Rahmen einer Fluoreszenz-Bindungsstudie experimentell getestet. Für sechs Moleküle war gegenüber KasA eine schwache, zu TLM vergleichbare Aktivität zu verzeichnen. Eine zweite VS-Studie befasste sich mit der Bewertung der Bindungsaffinität synthetisch leicht zugänglicher Derivate von GS95, einem gegenüber dem KasA-Wildtyp aktiven Molekül mit einer 1-Benzyluracil-Grundstruktur. Anhand geeigneter Synthesebausteine wurde eine virtuelle Datenbank von insgesamt 16 Derivaten erstellt, welche in die Bindetasche des Enzyms gedockt wurden. Für die vorhergesagten Bindemodi erfolgte dann eine Abschätzung der freien Bindungsenthalpie. Nach einer Bewertung der Orientierungen auf Basis der errechneten ΔG-Werte sowie einer visuellen Analyse wurden schließlich elf Verbindungen synthetisiert und im Fluoreszenz-Experiment getestet, wobei für alle Uracilderivate eine Aktivität zu beobachten war. Die Kd-Werte fallen jedoch ähnlich hoch aus wie bei GS95. Zur Untersuchung der Strukturdynamik des KasA-Wildtyps wurden drei MD-Simulationen des homodimeren Proteins von je 15 ns Länge durchgeführt. Mit Hilfe von 2D-RMSD-Berechnungen und einer hierarchischen Clusteranalyse wurden aus den drei Simulationen insgesamt zehn repräsentative Snapshots entnommen, welche die im Rahmen der Simulationszeit von insgesamt 90 ns produzierte strukturelle Vielfalt der Bindetasche von KasA wiedergeben. Wie die Analysen zeigen, wird ein dualer Charakter hinsichtlich der Flexibilität der unmittelbaren Taschenreste beobachtet. Hierbei zeigt Phe404 eine besonders ausgeprägte strukturelle Vielfalt; diese Beobachtung deckt sich mit der gatekeeper-Rolle der Aminosäure zwischen der Malonyl-Bindetasche und dem Acyl-Bindekanal, welcher für die Unterbringung der wachsenden Fettsäurekette im Enzym während der Katalyse verantwortlich zeichnet. Darüber hinaus erklärt die hohe Flexibilität von Phe404 möglicherweise die recht schwache Bindungsaffinität von TLM gegenüber dem Wildtyp von KasA, da die gatekeeper–Aminosäure nur in der geschlossenen Form einen stabilisierenden Effekt auf den Liganden ausübt. Besondere Bedeutung kommt hierbei einem Wassermolekül zu, welches als eine Art molekularer Schalter für die Flexibilität von Phe404 betrachtet werden kann und somit die Fixierung von TLM in der Bindetasche maßgeblich beeinflusst. Des Weiteren wurden innerhalb der Tasche hohe Besetzungsraten für je ein Wassermolekül identifiziert. Die aus den MD-Simulationen gewonnenen Erkenntnisse wurden anschließend zur Aufstellung von Empfehlungen für das Design neuartiger KasA-Inhibitoren verwendet. Des Weiteren wurde die Dynamik des oben erwähnten Acyl-Bindekanals, welcher sich aus den Aminosäuren 115-147 zusammensetzt, näher charakterisiert. Hierbei wurden die Reste 115-119 und insbesondere Leu116 als zweiter gatekeeper identifiziert, welcher die Öffnung des Acyl-Bindekanals zur Oberfläche des Proteins reguliert und somit eine entscheidende Funktion bei der Unterbringung der langkettigen Fettsäuresubstrate übernimmt. Schließlich wurden zwei repräsentative Bindetaschenkonformationen aus den MD-Simulationen hinsichtlich einer Verwendung in strukturbasierten VS-Studien näher untersucht. Mit Hilfe von hot spot Analysen und unter Berücksichtigung oben genannter Empfehlungen für das Design neuartiger KasA-Inhibitoren wurden verschiedene Pharmakophormodelle erstellt, welche nach Durchsuchung der zu Anfang dieses Kapitels erwähnten virtuellen Moleküldatenbank zwischen 149 und 420 verschiedene hit-Strukturen lieferten. Folglich scheint eine Adressierung der beiden Konformationen durch arzneistoffartige Verbindungen prinzipiell möglich. Unter den erhaltenen Verbindungen herrscht eine hohe strukturelle Vielfalt; außerdem unterscheiden sich diese im Allgemeinen deutlich von den Molekülen aus den vorangegangenen VS Studien, was das Potential der beiden Bindetaschenkonformationen zur Identifizierung von potentiellen KasA-Inhibitoren mit neuartigen Grundstrukturen zum Ausdruck bringt.
Wassermoleküle spielen oft eine entscheidende Rolle bei der Bindung von Liganden an Proteine. Zum einen ist dies in ihrer Eigenschaft als Wasserstoffbrückendonor und -akzeptor begründet, die es ermöglicht Wechselwirkung zwischen Ligand und Rezeptor zu vermitteln. Zum anderen stellen die Desolvatisierungsenthalpie und -entropie einer Bindetasche während der Ligandbindung einen entscheidenden Anteil der Bindungsaffinität dar. Obwohl man sich dieser Einflüsse seit langem bewusst ist, sind aktuelle Methoden des computerbasierten Wirkstoffdesigns nur in sehr begrenztem Umfang in der Lage, die entsprechenden Effekte zu erfassen und vorherzusagen. Da experimentelle Daten über die Effekte von Wassermolekülen in Protein-Ligand Komplexen von Natur aus schwierig zu erhalten sind, untersucht die vorliegende Arbeit eine Modellbindetasche einer Cytochrom c Peroxidase Mutante (CCP W191G) mit Hilfe von Molecular Modeling Techniken. Diese polare und solvatisierte Kavität ist strukturell sehr gut charakterisiert und bindet kleine, kationische Heterozyklen zusammen mit unterschiedlichen Mengen an Wassermolekülen. Für die Untersuchungen wurden strukturell ähnliche Liganden mit einem unterschiedlichen Wechselwirkungsmuster ausgewählt. Davon ausgehend wurde die Möglichkeit zweier Docking-Programme, den Grad der Wasserverdrängung durch den Liganden zusammen mit dem Bindungsmodus vorherzusagen, untersucht. Die dynamischen Eigenschaften der Bindetaschenwassermoleküle wurden mittels Molekulardynamiksimulationen studiert. Schließlich wurden diese rein strukturellen Betrachtungen durch eine energetische/thermodynamische Analyse komplettiert. Die Anwendung dieser unterschiedlichen Verfahren liefert einige neue Erkenntnisse über die untersuchte Modellbindetasche. Trotz der relativen Einfachheit der kleinen Kavität der CCP W191G Mutante war die vollständige Charakterisierung und eine korrekte (retrospektive) Vorhersage des Wasser-Wechselwirkungsmuster der Ligand-Komplexe nicht trivial. Zusammenfassend kann man festhalten, dass insgesamt eine gute Übereinstimmung zwischen den durch Computersimulationen erhaltenen Ergebnissen und den kristallographischen Daten erzielt wurde. Unerwartete Befunde, die auf den ersten Blick mit den kristallographischen Beobachtungen nicht übereinstimmen, können ebenso durch Limitationen in den Kristallstrukturen bedingt sein. Darüber hinaus gaben die Ergebnisse auch eine Hilfestellung, welches Verfahren zur Beantwortung einer Fragestellung im Rahmen von Wassermolekülen im Wirkstoffdesign geeignet sind. Schließlich wurden ebenso die Begrenzungen der jeweiligen Methoden aufgezeigt.
The aim of the present work is the development and implementation of new simulation
possibilities for the CAST program package. Development included, among other
things, the partial parallelization of the already existing force fields, extension of the
treatment of electrostatic interactions and implementation of molecular dynamics and
free energy algorithms.
The most time consuming part of force field calculations is the evaluation of the nonbonded
interactions. The calculation of these interactions has been parallelized and
it could be shown to yield a significant speed up for multi-core calculations compared
to the serial execution on only one CPU. For both, simple energy/gradient as well as
molecular dynamics simulations the computational time could be significantly reduced.
To further increase the performance of calculations employing a cutoff radius, a linkedcell
algorithm was implemented which is able to build up the non-bonded interaction
list up to 7 times faster than the original algorithm.
To provide access to dynamic properties based on the natural time evolution of a system,
a molecular dynamics code has been implemented. The MD implementation features
two integration schemes for the equations of motion which are able to generate stable
trajectories. The basic MD algorithm as described in Section 1.2 leads to the sampling
in the microcanonical (NVE) ensemble. The practical use of NVE simulations is limited
though because it does not correspond to any experimentally realistic situation.
More realistic simulation conditions are found in the isothermal (NVT) and isothermalisobaric
(NPT) ensembles. To generate those ensembles, temperature and pressure
control has been implemented. The temperature can be controlled in two ways: by direct
velocity scaling and by a Nose-Hoover thermostat which produces a real canonical
ensemble. The pressure coupling is realized by implementation of a Berendsen barostat.
The pressure coupling can be used for isotropic or anisotropic box dimensions with the
restriction that the angles of the box need to be 90. A crucial simulation parameter in
MD simulations is the length of the timestep. The timestep is usually in the rang of 1fs.
Increasing the timestep beyond 1fs can lead to unstable trajectories since the fastest
motion in the system, usually the H-X stretch vibration can not be sampled anymore.
A way to allow for bigger timesteps is the use of a constraint algorithm which constrains the H-X bonds to the equilibrium distance. For this the RATTLE algorithm has been
implemented in the CAST program. The velocity Verlet algorithm in combination with
the RATTLE algorithm has been shown to yield stable trajectories for an arbitrary
length of simulation time. In a first application the MD implementation is used in conjunction
with the MOPAC interface for the investigation of PBI sidechains and their
rigidity. The theoretical investigations show a nice agreement with experimentally obtained
results. Based on the MD techniques two algorithms for the determination of free
energy differences have been implemented. The umbrella sampling algorithm can be
used to determine the free energy change along a reaction coordinate based on distances
or dihedral angles. The implementation was tested on the stretching of a deca-L-alanine
and the rotation barrier of butane in vacuum. The results are in nearly perfect agreement
with literature values. For the FEP implementation calculations were performed
for a zero-sum transformation of ethane in explicit solvent, the charging of a sodium
ion in explicit solvent and the transformations of a tripeptide in explicit solvent. All
results are in agreement with benchmark calculations of the NAMD program as well
as literature values. The FEP formalism was then applied to determine the relative
binding free energies between two inhibitors in an inhibitor-protein complex.
Next to force fields, ab-initio methods can be used for simulations and global optimizations.
Since the performance of such methods is usually significantly poorer than force
field applications, the use for global optimizations is limited. Nevertheless significant
progress has been made by porting these codes to GPUs. In order to make use of these
developments a MPI interface has been implemented into CAST for communication
with the DFT code TeraChem. The CAST/TeraChem combination has been tested
on the $H_2 O_{10}$ cluster as well as the polypeptide met-Enkephalin. The pure ab-initio
calculations showed a superior behavior compared to the standard procedure where the
force field results are usually refined using quantum chemical methods.
Die vorliegende Arbeit beschäftigt sich mit der theoretischen Untersuchung zweier Themenkomplexe: der Erzeugung Hoher Harmonischer in Molekülen und dem Einfluss von gekoppelter Elektronen-Kern-Dynamik auf Ultrakurzpuls-Ionisationsprozesse und Quantenkontrolle. Während bei der Untersuchung der Hohen Harmonischen die Auswirkungen der Kernbewegung auf die Spektren im Mittelpunkt des Interesses stehen, wird bei der Analyse der gekoppelter Elektronen-Kern-Dynamik das Hauptaugenmerk auf die nicht-adiabatischen Effekte gerichtet, die auftreten, wenn Kern- und Elektronenbewegung sich nicht, wie es im Rahmen der Born-Oppenheimer-Näherung in der Quantenchemie häufig angenommen wird, voneinander trennen lassen.
In this work a new algorithm to determine quantum control fields from the instantaneous response of systems has been developed. The derived fields allow to establish a direct connection between the applied perturbation and the molecular dynamics. The principle is most easily illustrated in regarding a classical forced oscillator. A particle moving inside the respective potential is accelerated if an external field is applied acting in the same direction as its momentum (heating). In contrary, a deceleration is achieved by a field acting in the opposite direction as the momentum (cooling). Furthermore, when the particle reaches a classical turning point and then changes its direction, the sign of the field has to be changed to further drive the system in the desired way. The frequency of the field therefore is in resonance with the oscillator. This intuitively clear picture of a driven classical oscillator can be used for directing (or controlling) quantum mechanical wave packet motion. The efficiency of the instantaneous dynamics algorithm was demonstrated in treating various model problems, the population transfer in double well potentials, excitation and dissociation of selective modes, and the population transfer between electronic states. Although it was not tried to optimize the fields to gain higher yields, the control was found to be very efficient. Driving population transfer in a double well potential could be shown to take place with nearly 100% efficiency. It was shown that selective dissociation within the electronic ground state of HOD can be performed by either maximizing a selected coordinate's differential momentum change or the energy absorption. Concerning the population transfer into excited electronic states, a direct comparison with common control algorithms as optimal control theory and genetic algorithms was accomplished using a one-dimensional representation of methyl iodide. The fields derived from the various control theories were effective in transferring population into the chosen target state but the underlying physical background of the derived optimal fields was not obvious to explain. The instantaneous dynamics algorithm allowed to establish a direct relation between the derived fields and the underlying molecular dynamics. Bound-to-bound transitions could be handled more effectively. This was demonstrated on the sodium dimer in a representation of 3 electronic states being initially in its vibronic ground state. The objective was to transfer population into a predefined excited state. Choosing the first or the second state as a target, the control fields exhibited quite different features. The pulse-structure is related to the excited state wave packet, moving in, and out of the Franck-Condon region. Changing the control objective, the derived control field performed pure electronic transitions on a fast time-scale via a two-step transition. Futhermore, orientational effects have been investigated. The overall-efficiency of the population transfer for differently oriented molecules was about 70 % or more if applying a control field derived for a 45° orientation. Spectroscopic methods to gain information about the outcome of the control process have been investigated. It was shown that pump/probe femtosecond ionization spectroscopy is suited to monitor time-dependent molecular probability distributions. In particular, time-dependent photoelectron spectra are able to monitor the population in the various electronic states. In the last chapter a different possibility of controlling molecules was regarded by investigating molecular iodine with a setup similar to the STIRAP (“Stimulated Raman Adiabatic passage”) scenario. The possibility to extend this technique to a fs-time scale was examined in theory as well as in experiments, the latter being performed by Dr. Torsten Siebert in the Kiefer group, University of Würzburg. It was shown that off-resonant excitation with implementation of the pulses with a higher intensity of the Stokes pulse as compared to the pump pulse - describing a so-called f-STIRAP like configuration - was shown to effectively transfer population into excited ground-state vibrational levels. This was theoretically underlined by comparing the numerically exact coupling case with the adiabatic picture. The process was described to run in the vicinity of adibaticity. A new model explaining the process by the system's vector rotating around the dressed state vector will be adopted in future calculations. Altogether, a new promising algorithm to control dynamical processes based on the instantaneous response has been developed. Because the derived control fields have been shown to be very efficient in selectively influencing molecules, it is to be expected that farther reaching applications can be realized in future investigations.
Aldose Reduktase ALR2 katalysiert den ersten Schritt des Sorbitol-Stoffwechselweges. In diesem wird mit Hilfe des Kofaktors NADPH Glukose zu Sorbitol reduziert. Bei erhöhtem Blutzuckerspiegel, wie dies bei Diabetes-Patienten der Fall ist, ist dieser metabolische Weg von Bedeutung. Bis zu einem Drittel der Blutglukose wird zu Sorbitol reduziert. Die Folge der Sorbitolakkumulation in den Zellen und der Verminderung der NADPH-Konzentration sind „osmotischer“ sowie „oxidativer“ Stress. Diese stehen in Zusammenhang mit den vielfach diskutierten Spätschäden des Diabetes, wie diabetischer Katarakt, Neuro- und Nephropathie. Das Enzym ist experimentell sehr gut untersucht und eignet sich daher als Modellsystem zur Untersuchung der intrinsischen Proteinflexibilität und thermodynamischer Daten mit Hilfe von Computermethoden. Unter diesen Voraussetzungen steht der Gewinn eines besseren Verständnisses von molekularer Erkennung und Proteinbeweglichkeit der ALR2 unter Verwendung von Molekulardynamik-Simulationen MD als primäres Ziel im Zentrum dieser Arbeit. Dabei wurden MD-Studien zu zwei kristallographisch erhaltenen Protein-Ligand-Komplexen durchgeführt. Die Liganden unterscheiden sich nur geringfügig in der Länge einer Seitenkette, ihre Bindung führt allerdings zu gänzlich unterschiedlichen Bindemodi. Einer davon ist bislang einzigartig für die ALR2. Mit Hilfe von MD-Simulationen wurde versucht, eine Erklärung für diese neue Konformation der Bindetasche im Vergleich zu jener eines strukturell sehr ähnlichen Liganden zu finden. Außerdem waren über diese Studien Aussagen über besonders flexible Bereiche der ALR2-Bindetasche möglich, die mit bereits existierenden Erkenntnissen über die Bindetaschenflexibilität verglichen werden konnten. Darüber hinaus gelang es, durch die Methode der gesteuerten Molekulardynamik SMD einen Übergang zwischen einer röntgenkristallografisch ermittelten kofaktorgebundenen Holo-Konformation und kofaktorfreien Apo-Konformation zu simulieren. Computergestützte Methoden ermöglichen es also, weitläufige Bewegungen von einer Proteinkonformation in die andere nachzuvollziehen bzw. die experimentell erhaltenen Strukturen zu bestätigen. Eine mechanistische Deutung des Kofaktorassoziations- und Kofaktordissoziationsprozesses wurde ebenfalls versucht. Dafür war es notwendig, strukturelle Veränderungen im Protein zeitlich zu verfolgen und entscheidende Vorgänge zu identifizieren. Die Methode der SMD wurde in dieser Arbeit auch auf ein weiteres, pharmakologisch interessantes System übertragen. Dabei wurde versucht auch an zwei Vertretern der Klasse der Nukleären Rezeptoren NRs, dem Androgenrezeptor AR und dem Estrogenrezeptor ER, eine solche weitreichende Bewegung nachzuvollziehen. Auch bei diesen Rezeptoren sind zwei in der Position einer alpha-Helix unterschiedliche Formen bekannt. Auch hier wurden mit Hilfe der genannten Methode, relevante Ereignisse hinsichtlich der Helixmobilität identifiziert. Abschließend wurde auf den thermodynamischen Aspekt der Protein-Ligand-Komplexe eingegangen. Durch Berechnungen anhand der Methode der thermodynamischen Integration TI wurden relative Bindungsaffinitäten am Modellsystem ALR2 gewonnen. Durch den Vergleich mit experimentell vorhandenen Daten konnte die Methode validiert werden. Das Verfahren der TI sollte in Zukunft eine Voraussage von Affinitäten beliebiger, sich geringfügig unterscheidender Inhibitoren, die aber denselben Bindemodus aufweisen, ermöglichen und damit den Prozess des Wirkstoffdesigns erleichtern. Zusammenfassend ergab sich eine gute Übereinstimmung der experimentell ermittelten Strukturen bzw. Daten mit den durch Computersimulationen erhaltenen.
The aim of this thesis was to develop new automatic enhanced sampling methods by extending the idea of Parrinello’s metadynamics to multistate problems and by introducing new quantum-mechanical electronic collective variables. These methods open up a rich perspective for applications to the photophysical processes in complex molecular systems, which play a major role in many natural processes such as vision and photosynthesis, but also in the development of new materials for organic electronics, whose function depends on specific electronic properties such as biradicalicity.