Refine
Has Fulltext
- yes (2)
Is part of the Bibliography
- yes (2)
Document Type
- Doctoral Thesis (2) (remove)
Keywords
- premix (2) (remove)
In der vorliegenden Arbeit wurde der Einfluss hochdisperser, nanoskaliger Materialien auf die Fließregulierung eines speziell ausgesuchten Trägermaterials mit einer unregelmäßigen Partikelform und einer breiten Partikelgrößenverteilung untersucht. Als Modellsubstanz diente gemahlenes, kristallines Laktosemonohydrat im Vergleich zu Maisstärke mit gleichmäßiger Partikelform. Es wurde nachgewiesen, dass die Wirkung von Fließregulierungsmitteln auch bei kantigen Partikeln mit rauer Oberfläche wie gemahlener Laktose auf der Adsorption kleiner Agglomerate des nanoskaligen Fließregulierungsmittels beruht. Zur Charakterisierung der Fließeigenschaften von Pulvern verschiedener Morphologie stellt der Zugspannungstester eine alternative Methode dar. Anhand von Vergleichsmessungen mit der Scherzelle nach Jenike wurde gezeigt, dass der Zugspannungstester eine geeignete Methode ist. Ein weiterer Schwerpunkt der Arbeit lag auf der Entwicklung eines geeigneten Prämixes für den Einsatz von Fließregulierungsmitteln. Als Basis eines Prämixes sind grundsätzlich beide Trägermaterialien geeignet, Maisstärke ist der Laktose aber überlegen. In Prämixen mit Anteilen von 10 % Nanomaterial ist der Träger in der Lage das Fließregulierungsmittel zu zerteilen und zu adsorbieren. Diese Adsorbate werden in einer Endmischung schnell an die neu hinzugekommenen Partikel übertragen. Bei Einsatz eines Prämixes sinkt die Zugspannung mit steigender Mischzeit schneller als bei einer Direktmischung der Komponenten. Auch die Handhabung eines Prämixes hat sich als erheblich einfacher als die des reinen Nanomaterials herausgestellt. Die untersuchten Vormischungen sind sehr gut fließfähig und stauben kaum. Prämixe sind eine gute Option, Fließregulierungsmittel vorteilhaft in Pulvermischungen einzubringen. Eine Zugabe von zwei oder auch fünf Prozent eines Prämixes aus 10 % (m/m) Fließregulierungsmittel und Maisstärke statt der direkten Zugabe von 0,2 % bis 0,5 % Nanomaterial stellt eine verfahrenstechnische Verbesserung beim industriellen Einsatz von Fließregulierungsmitteln dar.
The contact of hot melt with liquid water - called Molten Fuel Coolant Interaction (MFCI) - can result in vivid explosions. Such explosions can occur in different scenarios: in steel or powerplants but also in volcanoes. Because of the possible dramatic consequences of such explosions an investigation of the explosion process is necessary.
Fundamental basics of this process are already discovered and explained, such as the frame conditions for these explosions. It has been shown that energy transfer during an MFCI-process can be very high because of the transfer of thermal energy caused by positive feedback mechanisms.
Up to now the influence of several varying parameters on the energy transfer and the explosions is not yet investigated sufficiently. An important parameter is the melt temperature, because the amount of possibly transferable energy depends on it. The investigation of this influence is the main aim of this work. Therefor metallic tin melt was used, because of its nearly constant thermal material properties in a wide temperature range. With tin melt research in the temperature range from 400 °C up to 1000 °C are
possible.
One important result is the lower temperature limit for vapor film stability in the experiments. For low melt temperatures up to about 600 °C the vapor film is so unstable that it already can collapse before the mechanical trigger. As expected the transferred thermal energy all in all increases with higher temperatures. Although this effect sometimes is superposed by other influences such as the premix of melt and water, the result is confirmed after a consequent filtering of the remaining influences. This trend is not only recognizable in the amount of transferred energy, but also in the fragmentation of melt or the vaporizing water. But also the other influences on MFCI-explosions showed interesting results in the frame of this work. To perform the experiments the installation and preparation of the experimental Setup in the laboratory were necessary.
In order to compare the results to volcanism and to get a better investigation of the brittle fragmentation
of melt additional runs with magmatic melt were made. In the results the thermal power during energy transfer could be estimated. Furthermore the model of “cooling fragments “ could be usefully applied.