Refine
Has Fulltext
- yes (21)
Is part of the Bibliography
- yes (21)
Year of publication
Document Type
- Doctoral Thesis (21)
Keywords
- Übergangsmetallkomplexe (21) (remove)
Zusammenfassung
Die vorliegende Arbeit wurde in drei Teilbereiche untergliedert. Der erste Teil beschäftigte sich mit der Untersuchung des anionischen Systems K[(OC)3M(PMe3)(SiR3)] (M = Fe, Ru, Os; R = Me, Et, Ph) und dessen Reaktivität gegenüber Dihalogenboranen. Der zweite Teil widmete sich der Untersuchung der Reaktivät des Eisenbis(borylen)komplexes 45 gegenüber verschiedenen Lewis-Basen und Lewis-Säuren. Im letzten Teil der Arbeit wurde die Insertion von Metallfragmenten der Übergangsmetalle der Gruppe 8 in die M=B-Doppelbindung des Borylenkomplexes 28 untersucht.
Durch Umsetzungen der anionischen Osmiumverbindung 64 mit Cl2BDur und Br2BDur konnten die Borylkomplexe 67 und 68 erhalten werden (SCHEMA 56). Die Untersuchungen zum sterischen Einfluss des Silylsubstituenten zeigten, dass die Osmiumkomplexe 65 und 66 mit SiEt3- bzw. SiPh3-Substituenten in die entsprechenden Borylkomplexe überführt werden können, wobei diese Spezies nicht analysenrein isoliert werden konnten.
Der Borylkomplex 68 konnte nachfolgend weder unter thermischen Bedingungen, noch unter Verwendung der Lewis-Base Pyridin bzw. des Halogenabstraktionsmittels Na[BArCl4] in einen terminalen Osmiumborylenkomplex umgewandelt werden (Schema 57).
Anfängliche Studien zur Reaktivität der anionischen Rutheniumverbindungen 81-83 gegenüber Dihalogenboranen haben sich auf den sterischen Einfluss der borgebundenen Arylsubstituenten konzentriert. Hierdurch konnte gezeigt werden, dass eine Ph-Substitution keine ausreichende Stabilisierung der entstehenden Borylkomplexe liefert. Im Gegensatz dazu erwies sich der sterische Anspruch von Duryl- und Mesitylsubsituenten als ideal für die Bildung stabiler Borylkomplexe, wohingegen die sterische Überfrachtung der Supermesityl- und Terphenylsubstituenten eine Salzeliminierungsreaktion von vornherein verhindert.
Der Einfluss des Halogensubstituenten in X2BDur (X = Cl, Br) wurde anhand der Reaktivität gegenüber 81 näher untersucht. In beiden Fällen konnten die entsprechenden Borylkomplexe 84 und 85 isoliert und charakterisiert werden. Da bei der Umsetzung mit Br2BDur auch noch weitere Produkte zu erkennen waren, wurde der sterische Einfluss des Silylsubstituenten in 82 und 83 auf die Produktverteilung bei Reaktion mit Br2BDur untersucht. Es hat sich gezeigt, dass die Wahl der Reaktionsbedingungen einen starken Einfluss auf den Reaktionsverlauf ausübt. So konnte durch regelmäßiges Entgasen der Reaktionslösung der Rutheniumborylenkomplex 86 erhalten werden, während eine thermische Reaktionsführung unter CO-Atmosphäre selektiv zu einer Silylboraneliminierung führte, dessen Produkt indirekt über die Bildung von [(OC)4Ru(PMe3)] (75) nachgewiesen werden konnte (Schema 59).
Während die Umsetzung der analogen Eisenspezies K[(OC)3Fe(PMe3)(SiEt3)] (92) mit Cl2BDur lediglich zu Zersetzung führte, konnte im Verlauf der Reaktion mit Br2BDur eine neue, sehr interessante Reaktivität beobachtet werden. Hier war die Salzeliminierungsreaktion mit einer Alkylboraneliminierung verbunden, wobei der intermediär entstehende Silylenkomplex (95) in situ zum dinuklearen, zweifach-verbrückten Bis(silylen)komplex 94 dimerisierte (SCHEMA 60). Unter photolytischen Bedingungen konnte 94 weiter in den dreifach-verbrückten Bis(silylen)komplex 96 überführt werden, welcher den ersten strukturell charaktersierten Komplex dieser Art darstellt.
In SCHEMA 61 sind alle relevanten Reaktivitäten des Systems K[(OC)3M(PMe3)(SiR3)] gegenüber X2BDur (X = Cl, Br) zusammen mit den Ergebnissen vorangegangener Arbeiten in einer Übersicht dargestellt.
Der zweite Teil dieser Arbeit beschäftigte sich mit der Reaktivität des Eisenbis(borylen)komplexes [(OC)3Fe(=BDur){=BN(SiMe3)2}] (45). Zunächst wurde 45 mit verschiedenen Lewis-Basen umgesetzt. Während die Umsetzungen mit verschiedenen NHCs (IMe, IMes, IDipp) nur zu Zersetzung führte, konnte durch die Reaktion mit cAACMe der außergewöhnliche Komplex 98 isoliert und vollständig charakterisiert werden (SCHEMA 62). Dieser stellt das erste Beispiel für eine intramolekulare Spaltung eines Carbonylliganden in einem einkernigen Komplex dar.
Anschließend wurde die Reaktivität von 45 gegenüber den Lewis-Säuren BBr3, AlBr3 und GaBr3 untersucht. Während die Umsetzung von 45 mit AlBr3 lediglich zu Zersetzung führte, konnte mit GaBr3 als Hauptprodukt Br2BDur nachgewiesen werden. In einem möglichen Reaktionsmechanismus ist die Reaktion mit einer 1,2-Addition des GaBr3 unter Bildung eines Gallylkomplexes verbunden, welcher nach Abspaltung von Br2BDur in einen instabilen Gallylenkomplex übergeht (SCHEMA 63).
Die Umsetzung von 45 mit BBr3 lieferte bei tiefen Temperaturen den zweikernigen Tris(borylen)komplex 100 (SCHEMA 64), welcher ein Analogon des wohlbekannten Fe2(CO)9 darstellt.
Das abschließende Kapitel dieser Arbeit befasste sich mit der Insertion von Metallfragmenten der Gruppe 8-Übergangsmetalle in die M=B-Doppelbindung von [(OC)5Mo=BN(SiMe3)2] (28). Während bei den Umsetzungen von 28 mit [(OC)4Fe(PMe3)] (90) und [(OC)4Ru(PMe3)] (75) die MOLPs 104 und 105 nur NMR-spektroskopisch nachgewiesen werden konnten, war die Isolierung des MOLPs 103 sowie dessen strukturelle Charakterisierung möglich (SCHEMA 65). Bemerkenswert ist hierbei, dass die Reaktion sowohl unter thermischen als auch unter photolytischen Bedingungen durchgeführt werden kann.
In the experiments presented in this work, linear and non-linear femtosecond time-resolved spectrsocopy were applied to investigate the structure-function and functiondynamics relationship in biological and artificially designed systems. The experiments presented in this work utilize femtosecond time-resolved transient absorption and transient grating as well as picosecond time-resolved fluorescence spectroscopy to investigate the photophysics and photochemistry of biological photoreceptors and address the light-induced excited-state processes in a particular molecular device that serves as a - structurally - very simple light-harvesting antenna and potentially as a catalysis-switch for the production of hydrogen in solution. The combination of white-light probe transient absorption and coherent transient grating spectroscopies yields spectral information about the excited state absorption in concert with high quality, high signal-to-noise kinetic transients, which allow for precise fitting and therefore very accurate time-constants to be extracted from the data. The use of femtosecond time-resolved transient grating spectroscopy is relatively uncommon in addressing questions concerning the excited-state reaction pathways of complex (biological) systems, and therefore the experiments presented in this work constitute according to the literature the first studies applying this technique to a a metalloporphyrin and an artificial light-harvesting antenna.
Im Rahmen dieser Arbeit wurde die Reaktivität des Phosphorans (C2F5)3PF2 gegenüber Lewis-Basen (N-heterozyklische Carbene und Phosphane) und gegenüber verschiedenen Übergangsmetall-Fluoridokomplexen untersucht. Im ersten Teil werden die Lewis-Säure/Base-Addukte zwischen (C2F5)3PF2 und verschiedenen
N-heterozyklischen Carbenen (NHCs) beschrieben. Der Fokus des zweiten Teils der Arbeit liegt auf der Darstellung kationischer Komplexe ausgehend von neutralen d-Block-Metallfluoriden, welche durch Fluorid-Transfer auf das Lewis-acide (C2F5)3PF2 erfolgt. Hierbei wurden Komplexe verschiedener Übergangsmetalle (Ti, Ni, Cu) verwendet, wodurch der Fluorid-Transfer auf das Phosphoran quer über die 3d-Reihe untersucht wurde. Im letzten Kapitel dieser Arbeit wurden die Synthese und die Anwendung von Kationen des Typs [(NHC)Cu]+ eingehender untersucht. Dazu wurde zunächst die Synthese der Ausgangsverbindungen [(NHC)Cu(F)] modifiziert. Anschließend wurden diese Fluorido-Komplexe auf deren Reaktivität gegenüber (C2F5)3PF2 untersucht. Nachfolgend wurden die Reaktivität von [(Dipp2Im)Cu(C6Me6)]FAP in Ligandenaustauschreaktionen bzw. die Synthese von Komplexen [(Dipp2Im)Cu(LB)]FAP (LB = Lewis-Base) eingehender untersucht.
The photochemistry and photophysics of transition metal complexes are of great interest, since such materials can be exploited for a wide range of applications such as in photocatalysis, sensing and imaging, multiphoton-absorption materials and the fabrication of OLEDs. A full understanding of the excited state behavior of transition metal compounds is therefore important for the design of new materials for the applications mentioned above. In principle, the luminescence properties of this class of compounds can be tuned by changing the metal or subtle changes in the ligand environment.
Furthermore, transition-metal complexes continue to play a major role in modern synthetic chemistry. In particular, they can realize selective transformations that would either be difficult or impossible by conventional organic chemistry. For example, they enable the efficient and selective formation of carbon–carbon bonds. One famous example of these types of transformations are metal-catalyzed cyclization reactions. Herein, metallacyclopentadiene complexes are considered as key intermediates in a number of metal-mediated or -catalyzed cyclization reactions, i.e. the [2+2+2] cyclotrimerization of alkynes. Recent research has focused on the synthesis and characterization of these metallacyclic intermediates such as MC4 ring systems. Metallacyclopentadienes are structurally related to main group EC4 systems such as boroles, siloles, thiophenes and phospholes. Overall, this group of compounds (EC4 analogues) is well known and has attracted significant attention due to their electron-transport and optical properties. Unlike transition metal analogues, however, these EC4 systems show no phosphorescence, which is due to inefficient SOC compared to 2nd and 3rd row transition metals, which promoted us to explore the phosphorescence potential of metallacyclopentadienes.
In 2001, Marder et al. developed a one-pot high-yield synthesis of luminescent 2,5 bis(arylethynyl)rhodacyclopentadienes by reductive coupling of 1,4-diarylbuta-1,3-diynes at a suitable rhodium(I) precursor. Over the past years, a variety of ligands (e.g. TMSA, S,S’ diethyldithiocarbamate, etc.) and 1,4-bis(p-R-phenyl)-1,3-butadiynes or linked , bis(p-R-arylethynyl)alkanes (R = electron withdrawing or donating groups) were investigated and always provided a selective formation of 2,5 bis(arylethynyl)rhodacyclopentadienes, which were reported to be fluorescent despite presence of the heavy atom. To examine the influence of the ligand sphere around the rhodium center on the intersystem-crossing (ISC) processes in the above-mentioned fluorescent rhodacyclopentadienes and to increase the metal character in the frontier orbitals by destabilizing the Rh filled d-orbitals, a -electron donating group was introduced, namely acetylacetonato (acac). Interestingly, in 2010 Tay reacted [Rh(κ2-O,O-acac)(PMe3)2] with ,-bis(p-R-arylbutadiynyl)alkanes and observed not only the fluorescent 2,5 bis(arylethynyl)rhodacyclopentadienes, but also rhodium 2,2’-bph complexes as products, which were reported to be phosphorescent in preliminary photophysical studies.
In this work, the reaction behavior of [Rh(κ2-O,O-acac)(L)2] (L = PMe3, P(p-tolyl)3) with different ,-bis(p-R-arylbutadiynyl)alkanes was established. Furthermore, the separation of the two isomers 2,5-bis(arylethynyl)rhodacyclopentadienes (A) and rhodium 2,2’-bph complexes (B), and the photophysical properties of those were explored in order to clarify their fundamentally different excited state behaviors.
Reactions of [Rh(κ2-O,O-acac)(P(p-tolyl3)2)] with ,-bis(arylbutadiynyl)alkanes gives exclusively weakly fluorescent 2,5-bis(arylethynyl)rhodacyclopentadienes. Changing the phosphine ligands to PMe3, reactions of [Rh(κ2-O,O-acac)(PMe3)2] and , bis(arylbutadiynyl)alkanes afford two isomeric types of MC4 metallacycles with very different photophysical properties, as mentioned before.
As a result of a normal [2+2] reductive coupling at rhodium, 2,5 bis(arylethynyl)rhodacyclopentadienes (A) are formed, which display intense fluorescence. Rhodium 2,2’-bph complexes (B), which show phosphorescence, have been isolated as a second isomer originating from an unusual [4+2] cycloaddition reaction and a subsequent -H-shift. Control of the isomer distribution, of 2,5-bis(arylethynyl)rhodacyclopentadienes (A) and rhodium biphenyl complexes (B), is achieved by modification of the linked , bis(arylbutadiynyl)alkane.
Changing the linker length from four CH2 to three CH2 groups, dramatically favors the formation of the rhodium biphenyl isomer B, providing a fundamentally new route to access photoactive metal biphenyl compounds in good yields. This is very exciting as the photophysical properties of only a limited number of bph complexes of Ir, Pd and Pt had been explored. The lack of photophysical reports in the literature is presumably due to the limited synthetic access to various substituted 2,2’-bph transition metal complexes.
On the other hand, as the reaction of [Rh(κ2-O,O-acac)(P(p-tolyl)3)2] with , bis(arylbutadiynyl)alkanes provides a selective reaction to give weakly fluorescent 2,5 bis(arylethynyl)rhodacyclopentadiene complexes with P(p-tolyl)3 as phosphine ligands, a different synthetic access to 2,5-bis(arylethynyl)rhodacyclopentadiene complexes with PMe3 as phosphine ligands was developed, preventing the time-consuming separation of the isomers. The weak rhodium-phosphorus bonds of 2,5-bis(arylethynyl)rhodacyclopentadiene complexes bearing P(p tolyl)3 as phosphine ligands, relative to those of related PMe3 complexes, allowed for facile ligand exchange reactions. In the presence of an excess of PMe3, a stepwise reaction was observed, giving first the mono-substituted, mixed-phosphine rhodacyclopentadiene intermediates and, subsequently, full conversion to the highly fluorescent 2,5 bis(arylethynyl)-rhodacyclopentadienes bearing only PMe3 ligands (by increasing the reaction temperature).
With spectroscopically pure 2,5-bis(arylethynyl)rhodacyclopentadiene complexes A (bearing PMe3 as phosphine ligands) and rhodium 2,2-bph complexes B in hand, photophysical studies were conducted. The 2,5-bis(arylethynyl)rhodacyclopentadienes (A) are highly fluorescent with high quantum yields up to 54% and very short lifetimes (τ = 0.2 – 2.5 ns) in solution at room temperature. Even at 77 K in glass matrices, no additional phosphorescence is observed which is in line with previous observations made by Steffen et al., who showed that SOC mediated by the heavy metal atom in 2,5-bis(arylethynyl)rhodacyclopentadienes and 2,5 bis(arylethynyl)iridacyclopentadienes is negligible. The origin of this fluorescence lies in the pure intra-ligand (IL) nature of the excited states S1 and T1. The HOMO and the LUMO are nearly pure and * ligand orbitals, respectively, and the HOMO is energetically well separated from the filled rhodium d orbitals. The absence of phosphorescence in transition metal complexes due to mainly IL character of the excited states is not unusual, even for heavier homologues than rhodium with greater SOC, resulting in residual S1 emission (fluorescence) despite ISC S1→Tn being sufficiently fast for population of T1 states. However, there are very few complexes that exhibit fluorescence with the efficiency displayed by our rhodacyclopentadienes, which involves exceptionally slow S1→Tn ISC on the timescale of nanoseconds rather than a few picoseconds or faster.
In stark contrast, the 2,2’-bph rhodium complexes B are exclusively phosphorescent, as expected for 2nd-row transition metal complexes, and show long-lived (hundreds of s) phosphorescence (Ф = 0.01 – 0.33) at room temperature in solution. As no fluorescence is detected even at low temperature, it can be assumed that S1→Tn ISC must be faster than both fluorescence and non-radiative decay from the S1 state. This contrasts with the behavior of the isomeric 2,5-bis(arylethynyl)rhodacyclopentadienes for which unusually slow ISC occurs on a timescale that is competitive with fluorescence (vide supra). The very small values for the radiative rate constants, however, indicate that the nature of the T1 state is purely 3IL with weak SOC mediated by the Rh atom. The phosphorescence efficiency of these complexes in solution at room temperature is even more impressive, as non-radiative coupling of the excited state with the ground state typically inhibits phosphorescence. Instead, the rigidity of the organic -system allows the ligand-based excited triplet state to exist in solution for up to 646 s and to emit with high quantum yields for biphenyl complexes. The exceptionally long lifetimes and small radiative rate constants of the rhodium biphenyl complexes are presumably a result of the large conjugated -system of the organic ligand. According to TD DFT studies, the T1 state involves charge-transfer from the biphenyl ligand into the arylethynyl moiety away from the rhodium atom. This reduces the SOC of the metal center that would be necessary for fast phosphorescence. These results show that the π-chromophoric ligand can gain control over the photophysical excited state behavior to such an extent that even heavy transition metal atoms like rhodium participate in increasing the fluorescence such as main-group analogues do. Furthermore, in the 2,2’-bph rhodium complexes, the rigidity of the organic -system allows the ligand-based excited triplet state to exist in solution for up to hundreds of s and to emit with exceptional quantum yields.
Therefore, investigations of the influence of the ligand sphere around the rhodium center have been made to modify the photophysical properties and furthermore to explore the reaction behavior of these rhodium complexes. Bearing in mind that the P(p-tolyl)3 ligands can easily be replaced by the stronger -donating PMe3 ligands, ligand exchange reactions with N heterocyclic carbenes (NHCs) as even stronger -donors was investigated. Addition of two equivalents of NHCs at room temperature led to the release of one equivalent of P(p-tolyl3) and formation of the mono-substituted NHC rhodium complex. The reaction of isolated mono-NHC complex with another equivalent of NHC at room temperature did not result in the exchange of the second phosphine ligand. Moderate heating of the reaction to 60 °C, however, resulted in the formation of tetra-substituted NHC rhodium complex [Rh(nPr2Im)4]+[acac]-. To circumvent the loss of the other ligands in the experiments described above, a different approach was investigated to access rhodacyclopentadienes with NHC instead of phosphine ligands.
Reaction of the bis-NHC complex [Rh(κ2-O,O-acac)(nPr2Im)2] with , bis(arylbutadiynyl)alkanes at room temperature resulted 2,5-bis(arylethynyl)-rhodacyclopentadienes with the NHC ligands being cis or trans to each other as indicated by NMR spectroscopic measurements and single-crystal X-ray diffraction analysis. Isolation of clean material and a fundamental photophysical study could not be finished for reasons of time within the scope of this work.
Furthermore, shortening of the well conjugated -system of the chromophoric ligand (changing from tetraynes to diynes) was another strategy to examine the reaction behavior of theses ligands with rhodium(I) complexes and to modify the excited state behavior of the formed rhodacyclopentadienes. The reaction of [Rh(κ2-O,O-acac)(PMe3)2] with 1,7 diaryl 1,6-heptadiynes (diynes) leads to the selective formation of 2,5 bis(aryl)rhodacyclopentadienes. These compounds, however, are very weakly fluorescent with quantum yields ФPL < 1, and very short emission lifetimes in toluene at room temperature. Presumably, vibrational modes of the bis(phenyl)butadiene backbone leads to a higher rate constant for non-radiative decay and is thus responsible for the low quantum yields compared to their corresponding PMe3 complexes with the bis(phenylethynyl)butadiene backbone at room temperature. No additional phosphorescence, even at 77 K in the glass matrix is observed.
Chancing the phosphine ligands to P(p-tolyl)3, reactions of [Rh(κ2-O,O-acac)(P(p-tolyl3)2)] with 1,7-diaryl-1,6-heptadiynes, however, resulted in a metal-mediated or -catalyzed cycloaddition reaction of alkynes and leads to full conversion to dimerization and trimerization products and recovery of the rhodium(I) starting material. This is intuitive, considering that P(Ar)3 (Ar = aryl) ligands are considered weaker -donor ligands and therefore have a higher tendency to dissociate. Therefore, rhodium(I) complexes with aryl phosphines as ligands have an increasing tendency to promote catalytic reactions, while the stronger -donating ligands (PMe3 or NHCs) promote the formation of stable rhodium complexes.
Finally, in Chapter 4, the findings of the work conducted on N-heterocyclic carbenes (NHCs) and cyclic (alkyl)(amino)carbenes (CAACs) is presented. These compounds have unique electronic and steric properties and are therefore of great interest as ligands and organo-catalysts. In this work, studies of substitution reactions involving novel carbonyl complexes of rhodium and nickel are reported. For characterization and comparison of CAACmethyl with the large amount of data available for NHC and sterically more demanding CAAC ligands, an overview on physicochemical data (electronics, sterics and bond strength) is provided.
The reaction of [Rh(-Cl)(CO)2]2 with 2 equivalents of CAACmethyl at low temperature afforded the mononuclear complex cis-[(RhCl(CO)2(CAACmethyl)]. However, reacting [Rh( Cl)(CO)2]2 with CAACmethyl at room temperature afforded a mixture of complexes. The mononuclear complex [(RhCl(CO)(CAACmethyl)2], the chloro-bridged complexes [(Rh2( Cl)2(CO)3(CAACmethyl)], [Rh(-Cl)(CO)(CAACmethyl)]2 and a carbon monoxide activation product were formed. The carbon monoxide activation product is presumably formed via the reaction of two equivalents of the CAAC with CO to give the bis-carbene adduct of CO, and subsequent rearrangement via migration of the Dipp moiety. While classical N-heterocyclic carbenes are not electrophilic enough to react with CO, related diamidocarbenes and alkyl(amino)carbenes undergo addition reactions with CO to give the corresponding ketenes. Consequently, to obtain the CAAC-disubstituted mononuclear complex selectively, 8 equivalents of CAACmethyl were reacted with 1 equivalent of [Rh(-Cl)(CO)2]2. For the evaluation of TEP values, [Ni(CO)3(CAAC)] was synthesized in collaboration with the group of Radius. With the complexes [(RhCl(CO)(CAACmethyl)2] and [Ni(CO)3(CAAC)] in hand, it was furthermore possible to examine the electronic and steric parameters of CAACmethyl. Like its bulkier congeners CAACmenthyl and CAACcy, the methyl-substituted CAAC is proposed to be a notably stronger -donor than common NHCs. While it has a very similar TEP value of 2046 cm-1, it additionally possess superior -acceptor properties (P = 67.2 ppm of phosphinidene adduct).
CAACs appear to be very effective in the isolation of a variety of otherwise unstable main group and transition metal diamagnetic and paramagnetic species. This is due to their low-lying LUMO and the small singlet-triplet gap. These electronic properties also allow free CAACs to activate small molecules with strong bonds. They also bind strongly to transition metal centers, which enables their use under harsh conditions. One recent development is the use of CAACs as ligands in transition metal complexes, which previously were only postulated as short-lived catalytic intermediates.[292,345] The availability of these reactive species allows for a better understanding of known catalytic reactions and the design of new catalysts and, moreover, new applications. For example Radius et al.[320] prepared a CAAC complex of cobalt as a precursor for thin-film deposition and Steffen et al.[346] reported a CAAC complex of copper with very high photoluminescent properties, which could be used in LED devices. With the development of cheap and facile synthetic methods for the preparation of CAACs and their corresponding transition metals complexes, as well as the knowledge of their electronic properties, it is safe to predict that applications in and around this field of chemistry will continue to increase.
Synthesis and Investigation of Borylene Complexes: from Borylene Transfer to Borylene Catenation
(2012)
Within the scope of this thesis, the area of borylene transfer has been broadened by including transition-metal alkynyl complexes and metal-carbon double bonds as borylene acceptors. In addition to double salt elimination, halide abstraction and dehydrogenation processes, a novel high-yield synthetic procedure for terminal borylene complexes was established, i.e. salt elimination and subsequent silylhalogenide liberation. Accordingly, it was possible to prepare [(OC)3(Me3P)Fe=BDur] as a rare example of a neutral arylborylene species. Moreover, this compound has been demonstrated to possess great potential for metathesis reactions and the functionalization of polycyclic aromatic hydrocarbons such as naphthalene. Moreover, it could undergo a phosphine-borylene exchange reaction, yielding the iron bis(borylene) complex [(OC)3Fe(BDur){BN(SiMe3)2}], which has turned out to be applicable for preparation of 1,4-diboracyclohexadiene and unprecedented 1,4-dibora-1,3-butadiene complexes, thus establishing a new type of borylene transfer. Most interestingly, upon transfer of further borylene moieties into the coordination sphere of iron, borylene-catenation was accomplished in a highly controlled manner.
Im Rahmen dieser Arbeit wurden neuartige Distanna-ansa-Halbsandwichkomplexe mit Molybdän und Wolfram als Zentralmetallatome hergestellt und charakterisiert. Die chemischen Eigenschaften der Verbindungen wurden bestimmt, und ihr Verhalten bei Erwärmung und ihre Reaktivität gegenüber Gruppe 10-Komplexen und elementaren Chalkogenen untersucht. Als eine weitere Ausgangsverbindung wurde die dilithiierte Molybdänspezies Li[(η5-C5H4Li)(CO)3Mo] ∙ 4 THF in guten Ausbeuten dargestellt. Diese beiden hochreaktiven Verbindungen wurden durch Umsetzung mit (Me2NBBr)2 erfolgreich zur Darstellung der Diboranyl-Oxycarbin-Komplexe [M{κ1-CO-B(NMe2)-B(NMe2)-(η5-C5H4)}(CO)2] (M = W, Mo) verwendet, die jedoch nur eine geringe thermische Stabilität zeigten. Durch Reaktion mit [(Ph3P)2Pt(η2-C2H4)] konnte durch Komplexierung der W≡C-Dreifachbindung die Spannung des Moleküls signifikant reduziert und damit die µ-Diboranyl-Oxycarbin-verbrückte Platin-Komplexe [M{η1,μ-CO-B(NMe2)-B(NMe2)-(η5-C5H4)}(CO)2{Pt(PPh3)2}] (M = W, Mo) isoliert werden. Die Synthese von Distanna-ansa-Halbsandwichkomplexen mit tert-Butyl-Gruppen am Zinn führte über eine zweistufige Syntheseroute nicht zum Erfolg, obwohl mit der Synthese der Komplexe [(η5-C5H5)W{SnR2(CH2I)}(CO)3] geeignete Ausgangsverbindungen dargestellt werden konnten. Diese wurden jedoch durch die Reaktion der beiden dilithiierten Spezies mit tBu4Sn2Cl2 in guten Ausbeuten dargestellt. Beide Verbindungen wurden vollständig charakterisiert und kristallografisch untersucht. Die Verbindungen [{κ1-SntBu2-SntBu2(η5-C5H4)}M(CO)3] (M = W, Mo) zeichnen sich trotz enger Winkel innerhalb des Henkels als unter Schutzatmosphäre bemerkenswert stabile Verbindungen aus. Die an beiden Komplexen durchgeführten Polymerisationsversuche führten nicht zur erwünschten ringöffnenden Polymerisation (ROP), sondern zur Zersetzung der Verbindungen unter Spaltung der ansa-Brücke, was durch DSC- und thermogravimetrische Analyse bewiesen werden konnte. Die Reaktion mit vierfach homoleptisch koordinierten Nickel(0)-Komplexen führte selektiv zum Austausch des zur Stannylgruppe trans-ständigen Carbonylliganden durch einen Liganden der Nickelverbindung. Durch Umsetzungen mit elementaren Chalkogenen wurde jedoch gezeigt, dass der Austausch eines Carbonylliganden durch ein tert-Butylisonitril die Reaktivität im Hinblick auf eine Insertion in die Sn–Sn-Bindung entscheidend erhöht. Im Falle von drei Carbonylliganden am Zentralmetallatom war die Insertion nur für den Wolframkomplex möglich. Auf diese Weise konnten zahlreiche Insertionsprodukte dargestellt und vollständig charakterisiert werden. Die NMR-spektroskopischen Daten sowie die Strukturen im Festkörper beweisen den nahezu vollständigen Abbau der Ringspannung durch die dreiatomige Brücke. Bei Zugabe von [Pd(CNtBu)2] erfolgte spontan die Insertion in die SnSn-Bindung, wodurch die neuartigen 1,3-Distanna-2-Pallada-ansa-Halbsandwichkomplexe [{κ1-SntBu2-{Pd(CNtBu)2}-SntBu2(η5-C5H4)}M(R)(CO)2] synthetisiert wurden. Diese Reaktion ist die erste oxidative Addition einer Halbsandwichkomplex-ansa-Brücke an ein Gruppe 10-Übergangsmetall. Die Molekülstrukturen im Festkörper zeigen ein nahezu perfekt quadratisch-planares Palladiumzentrum, wodurch die Winkel innerhalb der ansa-Brücke an den Stannylgruppen bis auf fast 120° geweitet werden. Es wurde ebenfalls versucht, die Darstellung von ansa-Halbsandwichkomplexen durch die Kopplung bzw. die Verbrückung von Bis(stannyl)-Halbsandwichverbindungen zu erreichen.
Die vorliegende Arbeit befasst sich mit der Synthese, Charakterisierung und Reaktivität von Boryldiazenidokomplexen. Im ersten Abschnitt wird die Synthese von neuartigen Boryldiazenidokomplexen behandelt. Im zweiten Teil werden Studien zu den Reaktivitäten dieser Verbindungen gegenüber Elektrophilen, Lewis-Basen sowie Reaktionen an den Element-Halogen-Bindungen vorgestellt.
The present studies which have been performed in the work-group C-2 (Prof. W. Kiefer) within the program of the Sonderforschungsbereichs 347, deal with the FT-Raman and –IR spectroscopy on new organometallic complexes, synthesized in the work-groups B-2 (Prof. W. Malisch), B-3 (Prof. W. A. Schenk), D-1 (Prof. H. Werner) and D-4 (Prof. D. Stalke). The FT-Raman spectra recorded at 1064 nm led to very useful and interesting information. Furthermore, the DFT calculations which are known to offer promise of obtaining accurate vibrational wavenumbers, were successfully used for the assignment of the vibrational spectra. For the first time it has been possible to ascribe exactly the n(RhC) stretching mode in the vinylidene rhodium(I) complex trans-[RhF(=C=CH2)(PiPr3)2] by using isotopic substitution, in conjunction with theoretical calculations. This is also true for the complexes trans-[RhF(CO)(PiPr3)2], trans-[RhF(C2H4)(PiPr3)2], trans-[RhX(=C=CHPh)(PiPr3)2] (X = F, Cl, Br, I, Me, PhCºC) and trans-[RhX(CN-2,6-xylyl)(PiPr3)2] (X = F, Cl, Br, I, CºCPh). In addition, the comparison between the n(RhC) wavenumbers of the complexes trans-[RhF(=13C=13CH2)(PiPr3)2] and trans-[RhF(CO)(PiPr3)2], containing the isoelectronic ligands 13C=13CH2 and CO, which have the same reduced mass, indicated that the Rh-C bond is stronger in the carbonyl than in the vinylidene complex. Besides, the n(RhF) stretching mode, which has been observed at higher wavenumbers in the FT-Raman and -IR spectra of trans-[RhF(CO)(PiPr3)2], showed that the carbonyl ligand is a better p-acceptor and a less effective s-donor than the vinylidene one. Moreover, the comparison of the n(CºC) and n(Rh-C) modes from the FT-Raman spectrum of the complexes trans-[Rh(CºCPh)(L)(PiPr3)2] (L = C=CHPh, CO, CN-2,6-xylyl) point out that the p-acceptor ability of the ligand trans to CºCPh should rise in the order C=CH2 < CO < CN-2,6-xylyl £ C=CHPh. The investigated sensitivity of the n(RhC), n(CC), n(CO) and n(CN) vibrational modes to the electronic modifications occuring in the vinylidene, carbonyl, ethylene and isonitrile complexes, should allow in the future the examination of the p-acceptor or p-donor properties of further ligands. Likewise, we were able to characterize the influence of various X ligands on the RhC bond by using the n(RhC) stretching mode as a probe for the weakening of this. The calculated wavenumbers of the n(RhC) for the vinylidene complexes trans-[RhX(=C=CHR)(PiPr3)2], where R = H or Ph, suggested that the strength of the Rh=C bond increases along the sequence X = CºCPh < CH3 < I < Br < Cl < F. For the series of carbonyl compounds trans-[RhX(CO)(PiPr3)2], where X = F, Cl, Br and I, analogous results have been obtained and confirmed from the model compounds trans-[RhX(CO)(PMe3)2]. Since, the calculated vibrational modes for the ethylene complex trans-[RhF(C2H4)(PiPr3)2] were in good agreement with the experimental results and supported the description of this complex as a metallacyclopropane, we were interested in getting more information upon this class of compounds. In this context, we have recorded the FT-Raman and -IR spectra of the thioaldehyde complexes mer-[W(CO)3(dmpe)(h2-S=CH2)] and mer-[W(CO)3(dmpe)(h2-S=CD2)] which have been synthezised by B-3. The positions of the different WL vibrational modes anticipated by the DFT calculations, were consistent with the experimental results. Indeed, the analysis of the band shifts in the FT-Raman and –IR spectra of the isotopomer mer-[W(CO)3(dmpe)(h2-S=CD2)] confirmed our assignment. The different stereoisomers of complex mer-[W(CO)3(dmpe)(h2-S=CH2)] were investigated too, since RMN and IR-data have shown that complex mer-[W(CO)3(dmpe)(h2-S=CH2)] lead in solution to an equilibrium. Since the information on the vibrational spectra of the molybdenum and tungsten complexes Cp(CO)2M-PR2-X (M = Mo, W; R = Me, tBu, Ph; X = S, Se) is very scarce, we extended our research work to this class of compounds. We have tried to elucidate the bonding properties in these chalcogenoheterocycle complexes by taking advantage of the mass effect on the different metal atoms (W vs. Mo). Thus, the observed band shifts allowed to assign most of the ML fundamental modes of these complexes. This project and the following one were a cooperation within the work-group B-2. The Raman and IR spectra of the matrix isolated photoproducts expected by the UV irradiation of the iron silyl complex Cp(CO)2FeSiH2CH3 have been already reported by Claudia Fickert and Volker Nagel in their PhD-thesis. Since no exact assignment was feasible for these spectra, we were interested in the study of the reaction products created by irradiation of the carbonyl iron silyl complex Cp(CO)2FeCH2SiH3. Although the calculated characteristic vibrational modes of the metal ligand unit for the various photoproducts are significantly different in constitution, they are very similar in wavenumbers, which did not simplify their identification. However, the theoretical results have been found to be consistent with the earlier experimental results. Finally, the last part of this thesis has been devoted to the (2-Py)2E- anions which exhibit a high selectivity toward metal-coordination. All di(2-pyridyl) amides and -phosphides which were synthesized by D-4, coordinate the R2Al+ fragment via both ring nitrogen atoms. This already suggests that the charge density in the anions is coupled into the rings and accumulated at the ring nitrogen atoms, but the Lewis basicity of the central nitrogen atom in Et2Al(2-Py)2N is still high enough to coordinate a second equivalent AlEt3 to form the Lewis acid base adduct Et2Al(2-Py)2NAlEt3. Due to the higher electronegativity of the central nitrogen atom in Me2Al(2-Py)2N, Et2Al(2-Py)2N and Et2Al(2-Py)2NAlEt3, compared to the bridging two coordinated phosphorus atom in Me2Al(2-Py)2P and Et2Al(2-Py)2P, the di(2-pyridyl)amide is the hardest Lewis base. In the phosphides merely all charge density couples into the rings leaving the central phosphorus atom only attractive for soft metals. These results were confirmed by using DFT and MP2 calculations. Moreover, a similar behaviour has been observed and described for the benzothiazolyl complex [Me2Al{Py(Bth)P}], where complementary investigations are to be continued. The DFT calculations carried out on the model compounds analysed in these studies supply very accurate wavenumbers and molecular geometries, these being in excellent agreement with the experimental results obtained from the corresponding isolated complexes.
Im Rahmen der vorliegenden Arbeit wurde die Reaktivität von niedervalenten Übergangsmetallkomplexen gegenüber Lewis-Säuren systematisch untersucht. Dabei konnten zwei unterschiedliche Reaktionsmuster aufgedeckt werden. Einerseits wurden Produkte der oxidativen Addition isoliert, andererseits wurde die Bildung von Lewis-Säure-Base-Addukten beobachtet. Die Umsetzung von [Pd(PCy3)2] mit den Bromboranen BrBCat’ und Br2BPip resultiert in den Palladiumborylkomplexen trans [(Cy3P)2Pd(Br)(BCat’)] und trans [(Cy3P)2Pd(Br){B(Br)Pip}]. Der weitere Fokus lag auf den vielversprechenden niedervalenten Platinverbindungen und der Variation der Lewis-Säure. Die Umsetzung von [Pt(PCy3)2] mit den Bismuthalogeniden BiCl3 und BiBr3 lieferte die jeweiligen Produkte der oxidativen Addition. Von Ersterem konnten Kristalle erhalten werden, wobei der annähernd quadratisch-planare Komplex trans [(Cy3P)2Pt(Cl)(BiCl2)] die erste oxidative Addition eines Bismuthalogenids an ein niedervalentes Übergangsmetallzentrum repräsentiert. Der relativ einfache Zugang zu Systemen mit neuartigen Bindungsmodi ausgehend von Platin(0)komplexen war jedoch nicht nur auf Lewis-Säuren des p-Blocks beschränkt. Die Übertragung der Reaktivitätauf das stark Lewis-saure s-Block-Halogenid BeCl2 ermöglichte die Isolierung des Addukts [(Cy3P)2Pt–BeCl2]. Eine besondere Eigenschaft dieser Verbindung ist die Möglichkeit einer weiterführenden Substitution am Berylliumzentrum. So konnten durch Umsetzung mit Mesityllithium bzw. Methyllithium die entsprechenden heteroleptischen Verbindungen [(Cy3P)2Pt–Be(Cl)Mes] und [(Cy3P)2Pt–Be(Cl)Me] erhalten werden. Die analoge Umsetzung von [Pd(PCy3)2] mit BeCl2 resultierte nicht in der Bildung eines Addukts. Stattdessen bildet sich neben elementarem Palladium die dinukleare Verbindung [Be2Cl2(µ-Cl)2(PCy3)2]. Jedes Berylliumzentrum ist von einem verbrückenden und einem terminalen Chlorsubstituenten sowie einem Phosphanliganden annähernd tetraedrisch umgeben. Die Umsetzung von [Pt(PCy3)2] mit Aluminiumhalogeniden in Toluol bzw. Benzol lieferte die unerwarteten Addukte [(Cy3P)2Pt–AlX3] (X = Cl, Br, I). [(Cy3P)2Pt–AlCl3] und [(Cy3P)2Pt–AlBr3] konnten hierbei strukturell charakterisiert werden. Beide Spezies zeigen eine außergewöhnliche T-förmige Struktur. Eine völlig andere Reaktivität wurde bei der analogen Reaktion von AlCl3 bzw. AlBr3 mit [Pt(PCy3)2] in THF beobachtet. Hier fand eine Ringöffnung statt und es resultierten die dimeren Produkte [(Cl)(Cy3P)2Pt(C4H8O)AlCl2∙thf]2 und [(Br)(Cy3P)2Pt(C4H8O)AlBr2∙thf]2. Ein Vergleich der Kristallstrukturen zeigt eine unterschiedliche Geometrie im Festkörper. Eine weitere Variation der Addukt-Systeme war nicht nur durch das Lösemittel, sondern auch die Anzahl der Phospanliganden möglich. Mit [Pt(PEt3)3] als Ausgangsmaterial konnten durch die Umsetzung mit AlCl3 und AlI3 in Benzol bzw. Toluol ebenfalls die entsprechenden Addukte dargestellt und strukturell charakterisiert werden. [(Et3P)3Pt–AlCl3] und [(Et3P)3Pt–AlI3] zeigen eine ungewöhnliche Geometrie am Platinzentrum, die zwischen quadratisch-planar und tetraedrisch liegt. Analoge Studien zu Galliumhalogeniden GaX3 (X = Cl, Br, I) lieferten überraschende Ergebnisse. Die Umsetzung von [Pt(PCy3)2] mit GaCl3 führte zum Platin-Gallium-Addukt [(Cy3P)2Pt–GaCl3], wohingegen die Reaktionen mit GaBr3 bzw. GaI3 zur Bildung der entsprechenden Produkte der oxidativen Addition trans [(Cy3P)2Pt(Br)(GaBr2)] bzw. trans [(Cy3P)2Pt(I)(GaI2)] führen. Im Fall von [(Cy3P)2Pt–GaCl3] zeigt sich eine T förmige Struktur, während bei Letzteren die Geometrie am Platinzentrum annähernd quadratisch-planar ist. Da die Umsetzungen von niedervalenten Übergangsmetallverbindungen mit p- und s Block-Metallhalogeniden erfolgreich war, wurde die Übertragbarkeit auf entsprechende d Block-Verbindungen untersucht. Die Umsetzung von [Pt(PCy3)2] mit ZrCl4 in Benzol resultierte in dem Platin-Zirkonium-Addukt [(Cy3P)2Pt–ZrCl4]. Dieses repräsentiert das erste Beispiel einer dativen Bindung zwischen einem frühen und einem späten Übergangsmetall. Neben den Addukten mit metallhaltigen Lewis-Säuren konnten auch die Platincarbonylkomplexe [(Cy3P)2Pt(CO)] und [(Cy3P)2Pt(CO)2] ausgehend von [Pt(PCy3)2] realisiert werden. Der Monocarbonylkomplex [(Cy3P)2Pt(CO)] ist hierbei lediglich durch photolytischen Transfer einer Carbonyleinheit von [Cp*Ir(CO)2] darstellbar. [(Cy3P)2Pt(CO)] erwies sich bei Raumtemperatur als stabil und nimmt im Festkörper eine trigonal-planare Struktur am Platinzentrum ein. Der Dicarbonylkomplex [(Cy3P)2Pt(CO)2] konnte durch direkte Behandlung von [Pt(PCy3)2] mit Kohlenstoffmonoxid erhalten werden und ist nur bei Temperaturen unterhalb von –20 °C haltbar. Beide Verbindungen sind seltene Vertreter von Platin-Monocarbonyl- bzw. Platin-Dicarbonylkomplexen.