Refine
Has Fulltext
- yes (4)
Is part of the Bibliography
- yes (4)
Year of publication
- 2013 (4) (remove)
Document Type
- Doctoral Thesis (4)
Keywords
- Simulation (4) (remove)
Institute
Sonstige beteiligte Institutionen
ResearcherID
- D-1250-2010 (1)
Continuously increasing energy prices have considerably influenced the cost of living over the last decades. At the same time increasingly extreme weather conditions, drought-filled summers as well as autumns and winters with heavier rainfall and worsening storms have been reported. These are possibly the harbingers of the expected approaching global climate change. Considering the depletability of fossil energy sources and a rising distrust in nuclear power, investigations into new and innovative renewable energy sources are necessary to prepare for the coming future.
In addition to wind, hydro and biomass technologies, electricity generated by the direct conversion of incident sunlight is one of the most promising approaches. Since the syntheses and detailed studies of organic semiconducting polymers and fullerenes were intensified, a new kind of solar cell fabrication became conceivable. In addition to classical vacuum deposition techniques, organic cells were now also able to be processed from a solution, even on flexible substrates like plastic, fabric or paper.
An organic solar cell represents a complex electrical device influenced for instance by light interference for charge carrier generation. Also charge carrier recombination and transport mechanisms are important to its performance. In accordance to Coulomb interaction, this results in a specific distribution of the charge carriers and the electric field, which finally yield the measured current-voltage characteristics. Changes of certain parameters result in a complex response in the investigated device due to interactions between the physical processes. Consequently, it is necessary to find a way to generally predict the response of such a device to temperature changes for example.
In this work, a numerical, one-dimensional simulation has been developed based on the drift-diffusion equations for electrons, holes and excitons. The generation and recombination rates of the single species are defined according to a detailed balance approach. The Coulomb interaction between the single charge carriers is considered through the Poisson equation. An analytically non-solvable differential equation system is consequently set-up. With numerical approaches, valid solutions describing the macroscopic processes in organic solar cells can be found. An additional optical simulation is used to determine the spatially resolved charge carrier generation rates due to interference.
Concepts regarding organic semiconductors and solar cells are introduced in the first part of this work. All chapters are based on previous ones and logically outline the basic physics, device architectures, models of charge carrier generation and recombination as well as the mathematic and numerical approaches to obtain valid simulation results.
In the second part, the simulation is used to elaborate issues of current interest in organic solar cell research. This includes a basic understanding of how the open circuit voltage is generated and which processes limit its value. S-shaped current-voltage characteristics are explained assigning finite surface recombination velocities at metal electrodes piling-up local space charges. The power conversion efficiency is identified as a trade-off between charge carrier accumulation and charge extraction. This leads to an optimum of the power conversion efficiency at moderate to high charge carrier mobilities. Differences between recombination rates determined by different interpretations of identical experimental results are assigned to a spatially inhomogeneous recombination, relevant for almost all low mobility semiconductor devices.
Die Simulationstechnologie in der Medizin hat in den letzten Jahren große Fortschritte gemacht. In der Zwischenzeit gibt es auch für Herzkatheteruntersuchungen und -interventionen „Virtual reality“ Simulatoren, die ein realistisches Training von Kathetereingriffen erlauben. Nicht geklärt ist bislang, ob Simulationstraining das Stressniveau des Untersuchers reduzieren kann.
Im Rahmen dieser Studie wurde zur Beantwortung der genannten Fragestellung der Effekt von Virtual-Reality-Training auf das Stressniveau von Anfängern in der interventionellen Kardiologie untersucht. Hierzu wurde eine randomisiert-stratifizierte Studie bei 33 Anfängern in der interventionellen Kardiologie durchgeführt. Die Probanden wurden in eine Kontroll- und Simulationsgruppe aufgeteilt. Die Simulationsgruppe erhielt ein achtstündiges intensives Training an verschiedenen Simulatoren, während die Kontrollgruppe kein Simulationstraining, sondern lediglich eine theoretische Wissensvermittlung erhielt. Alle Teilnehmer mussten unter realitätsnahen Umständen im Herzkatheterlabor der Universitätsklinik Würzburg innerhalb von 30 Minuten eine PCI an einem pulsatilen Herzkreislaufmodell durchführen. Die Probanden dokumentierten vor und nach der Prä- und Postevaluation ihr aktuelles „Befinden“ anhand eines psychologi-schen Fragebogens PANAS. Ebenso wurden die Probanden hinsichtlich ihrer manuellen Fähigkeiten nach einem strukturierten Evaluationsbogen von einem interventionell tätigen Kardiologen bewertet
Die Ergebnisse zeigten initial für die Parameter „aktiv, interessiert, freudig erregt, stark, angeregt, stolz, begeistert, wach, entschlossen und aufmerksam“ des Fragebogens PANAS keinen gruppenspezifischen Unterschied. Nach einem achtstündigen Simulationstraining gab die Simulationsgruppe eine signifikante Reduktion des Stressniveaus im Vergleich zur Kontrollgruppe an.
Die aktuelle Studie zeigte, dass das Training an den Virtual Reality Simulatoren die herkömmliche Ausbildung in effektiver Weise ergänzen kann.
Weitere Studien mit einer größeren und zugleich homogeneren Stichprobengröße sind nötig, um die genannten Hypothesen zu bestätigen.
Die Mikrostruktur von Zirkonoxid–Aluminiumoxid Keramiken wurde im Rasterelektronenmikroskop (REM) untersucht und mittels quantitativer Bildanalyse weiter charakterisiert. Die so erhaltenen spezifischen morphologischen Kennwerte wurden mit denen, die an dreidimensionalen Modellstrukturen äquivalent gewonnen wurden, verglichen. Es wurden modifizierte Voronoistrukturen benutzt, um die beteiligten Phasen in repräsentativen Volumenelementen (RVE) auf Voxelbasis zu erzeugen. Poren wurden an den Ecken und Kanten dieser Strukturen nachträglich hinzugefüg.
Nachdem alle relevanten Kennwerte der Modellstrukturen an die realen keramischen Mikrostrukturen angepasst wurden, musste das RVE für die Finite Element Simulationen (FES) geeignet vernetzt werden. Eine einfache Übernahme der Voxelstrukturen in hexaedrische Elemente führt zu sehr langen Rechenzeiten, und die erforderliche Genauigkeit der FES konnte nicht erreicht werden. Deshalb wurde zunächst eine adaptive Oberflächenvernetzung ausgehend von einem generally classed marching tetrahedra Algorithmus erzeugt. Dabei wurde besonderer Wert auf die Beibehaltung der zuvor angepassten Kennwerte gelegt. Um die Rechenzeiten zu verkürzen ohne die Genauigkeit der FES zu beeinträchtigen, wurden die Oberflächenvernetzungen dergestalt vereinfacht, dass eine hohe Auflösung an den Ecken und Kanten der Strukturen erhalten blieb, während sie an flachen Korngrenzen stark verringert wurde. Auf Basis dieser Oberflächenvernetzung wurden Volumenvernetzungen, inklusive der Abbildung der Korngrenzen durch Volumenelemente, erzeugt und für die FES benutzt. Dazu wurde ein FE-Modell zur Simulation der Impedanzspektren aufgestellt und validiert.
Um das makroskopische elektrische Verhalten der polykristallinen Keramiken zu simulieren, mussten zunächst die elektrischen Eigenschaften der beteiligten Einzelphasen gemessen werden. Dazu wurde eine Anlage zur Impedanzspektroskopie bis 1000 °C aufgebaut und verwendet. Durch weitere Auswertung der experimentellen Daten unter besonderer Berücksichtigung der Korngrenzeffekte wurden die individuellen Phaseneigenschaften erhalten.
Die Zusammensetzung der Mischkeramiken reichte von purem Zirkonoxid (3YSZ) bis zu purem Aluminiumoxid. Es wurde eine sehr gute Übereinstimmung zwischen den experimentellen und simulierten Werten bezüglich der betrachteten elektrischen, mechanischen und thermischen Eigenschaften erreicht. Die FES wurden verwendet, um die Einflüsse verschiedener mikrostruktureller Parameter, wie Porosität, Korngröße und Komposition, auf das makroskopische Materialverhalten näher zu untersuchen.
Staphylococcus aureus (SA) causes nosocomial infections including life threatening sepsis by multi-resistant strains (MRSA). It has the ability to form biofilms to protect it from the host immune system and from anti staphylococcal drugs. Biofilm and planctonic life style is regulated by a complex Quorum-Sensing (QS) system with agr as a central regulator. To study biofilm formation and QS mechanisms in SA a Boolean network was build (94 nodes, 184 edges) including two different component systems such as agr, sae and arl. Important proteins such as Sar, Rot and SigB were included as further nodes in the model. System analysis showed there are only two stable states biofilm forming versus planctonic with clearly different subnetworks turned on. Validation according to gene expression data confirmed this. Network consistency was tested first according to previous knowledge and literature. Furthermore, the predicted node activity of different in silico knock-out strains agreed well with corresponding micro array experiments and data sets. Additional validation included the expression of further nodes (Northern blots) and biofilm production compared in different knock-out strains in biofilm adherence assays. The model faithfully reproduces the behaviour of QS signalling mutants. The integrated model allows also prediction of various other network mutations and is supported by experimental data from different strains. Furthermore, the well connected hub proteins elucidate how integration of different inputs is achieved by the QS network. For in silico as well as in vitro experiments it was found that the sae-locus is also a central modulator of biofilm production. Sae knock-out strains showed stronger biofilms. Wild type phenotype was rescued by sae complementation. To elucidate the way in which sae takes influence on biofilm formation the network was used and Venn-diagrams were made, revealing nodes regulated by sae and changed in biofilms. In these Venn-diagrams nucleases and extracellular proteins were found to be promising nodes. The network revealed DNAse to be of great importance. Therefore qualitatively the DNAse amount, produced by different SA mutants was measured, it was tried to dissolve biofilms with according amounts of DNAse and the concentration of nucleic acids, proteins and polysaccharides were measured in biofilms of different SA mutants.
With its thorough validation the network model provides a powerful tool to study QS and biofilm formation in SA, including successful predictions for different knock-out mutant behaviour, QS signalling and biofilm formation. This includes implications for the behaviour of MRSA strains and mutants. Key regulatory mutation combinations (agr–, sae–, sae–/agr–, sigB+, sigB+/sae–) were directly tested in the model but also in experiments. High connectivity was a good guide to identify master regulators, whose detailed behaviour was studied both in vitro and in the model. Together, both lines of evidence support in particular a refined regulatory role for sae and agr with involvement in biofilm repression and/or SA dissemination. With examination of the composition of different mutant biofilms as well as with the examination of the reaction cascade that connects sae to the biofilm forming ability of SA and also by postulating that nucleases might play an important role in that, first steps were taken in proving and explaining regulatory links leading from sae to biofilms. Furthermore differences in biofilms of different mutant SA strains were found leading us in perspective towards a new understanding of biofilms including knowledge how to better regulate, fight and use its different properties.