Refine
Has Fulltext
- yes (36)
Is part of the Bibliography
- yes (36) (remove)
Year of publication
Document Type
- Doctoral Thesis (36)
Language
- English (36) (remove)
Keywords
- Femtosekundenspektroskopie (4)
- Kleinsatellit (4)
- Ultrakurzzeitspektroskopie (4)
- Polymere (3)
- 3D-Druck (2)
- Bildverarbeitung (2)
- Biomaterial (2)
- Data Fusion (2)
- Datenfusion (2)
- Distributed Control (2)
Institute
- Graduate School of Science and Technology (36) (remove)
Sonstige beteiligte Institutionen
EU-Project number / Contract (GA) number
- 320377 (1)
The ecosystem of the high northern latitudes is affected by the recently changing environmental conditions. The Arctic has undergone a significant climatic change over the last decades. The land coverage is changing and a phenological response to the warming is apparent. Remotely sensed data can assist the monitoring and quantification of these changes. The remote sensing of the Arctic was predominantly carried out by the usage of optical sensors but these encounter problems in the Arctic environment, e.g. the frequent cloud cover or the solar geometry. In contrast, the imaging of Synthetic Aperture Radar is not affected by the cloud cover and the acquisition of radar imagery is independent of the solar illumination. The objective of this work was to explore how polarimetric Synthetic Aperture Radar (PolSAR) data of TerraSAR-X, TanDEM-X, Radarsat-2 and ALOS PALSAR and interferometric-derived digital elevation model data of the TanDEM-X Mission can contribute to collect meaningful information on the actual state of the Arctic Environment. The study was conducted for Canadian sites of the Mackenzie Delta Region and Banks Island and in situ reference data were available for the assessment. The up-to-date analysis of the PolSAR data made the application of the Non-Local Means filtering and of the decomposition of co-polarized data necessary.
The Non-Local Means filter showed a high capability to preserve the image values, to keep the edges and to reduce the speckle. This supported not only the suitability for the interpretation but also for the classification. The classification accuracies of Non-Local Means filtered data were in average +10% higher compared to unfiltered images. The correlation of the co- and quad-polarized decomposition features was high for classes with distinct surface or double bounce scattering and a usage of the co-polarized data is beneficial for regions of natural land coverage and for low vegetation formations with little volume scattering. The evaluation further revealed that the X- and C-Band were most sensitive to the generalized land cover classes. It was found that the X-Band data were sensitive to low vegetation formations with low shrub density, the C-Band data were sensitive to the shrub density and the shrub dominated tundra. In contrast, the L-Band data were less sensitive to the land cover. Among the different dual-polarized data the HH/VV-polarized data were identified to be most meaningful for the characterization and classification, followed by the HH/HV-polarized and the VV/VH-polarized data. The quad-polarized data showed highest sensitivity to the land cover but differences to the co-polarized data were small. The accuracy assessment showed that spectral information was required for accurate land cover classification. The best results were obtained when spectral and radar information was combined. The benefit of including radar data in the classification was up to +15% accuracy and most significant for the classes wetland and sparse vegetated tundra. The best classifications were realized with quad-polarized C-Band and multispectral data and with co-polarized X-Band and multispectral data. The overall accuracy was up to 80% for unsupervised and up to 90% for supervised classifications. The results indicated that the shortwave co-polarized data show promise for the classification of tundra land cover since the polarimetric information is sensitive to low vegetation and the wetlands. Furthermore, co-polarized data provide a higher spatial resolution than the quad-polarized data.
The analysis of the intermediate digital elevation model data of the TanDEM-X showed a high potential for the characterization of the surface morphology. The basic and relative topographic features were shown to be of high relevance for the quantification of the surface morphology and an area-wide application is feasible. In addition, these data were of value for the classification and delineation of landforms. Such classifications will assist the delineation of geomorphological units and have potential to identify locations of actual and future morphologic activity.
This work brings forward successful implementations of ultrafast chirality-sensitive spectroscopic techniques by probing circular dichroism (CD) or optical rotation dispersion (ORD). Furthermore, also first steps towards chiral quantum control, i.e., the selective variation of the chiral properties of molecules with the help of coherent light, are presented.
In the case of CD probing, a setup capable of mirroring an arbitrary polarization state of an ultrashort laser pulse was developed. Hence, by passing a left-circularly polarized laser pulse through this setup a right-circularly polarized laser pulse is generated. These two pulse enantiomers can be utilized as probe pulses in a pump--probe CD experiment. Besides CD spectroscopy, it can be utilized for anisotropy or ellipsometry spectroscopy also. Within this thesis, the approach is used to elucidate the photochemistry of hemoglobin, the oxygen transporting protein in mammalian blood. The oxygen loss can be triggered with laser pulses as well, and the results of the time-resolved CD experiment suggest a cascade-like relaxation, probably through different spin states, of the metallo-porphyrins in hemoglobin.
The ORD probing was realized via the combination of common-path optical heterodyne interferometric polarimetry and accumulative femtosecond spectroscopy. Within this setup, on the one hand the applicability of this approach for ultrafast studies was demonstrated explicitly. On the other hand, the discrimination between an achiral and a racemic solution without prior spatial separation was realized. This was achieved by inducing an enantiomeric excess via polarized femtosecond laser pulses and following its evolution with the developed polarimeter. Hence, chiral selectivity was already achieved with this method which can be turned into chiral control if the polarized laser pulses are optimized to steer an enhancement of the enantiomeric excess.
Furthermore, within this thesis, theoretical prerequisites for anisotropy-free pump--probe experiments with arbitrary polarized laser pulses were derived. Due to the small magnitude of optical chirality-sensitve signals, these results are important for any pump--probe chiral spectroscopy, like the CD probing presented in this thesis. Moreover, since for chiral quantum control the variation of the molecular structure is necessary, the knowledge about rearrangement reactions triggered by photons is necessary. Hence, within this thesis the ultrafast Wolff rearrangement of an α-diazocarbonyl was investigated via ultrafast photofragment ion spectroscopy in the gas phase. Though the compound is not chiral, the knowledge about the exact reaction mechanism is beneficial for future studies of chiral compounds.
Coherent Multidimensional Spectroscopy in Molecular Beams and Liquids Using Incoherent Observables
(2018)
The aim of the present work was to implement an experimental approach that enables coherent two-dimensional (2D) electronic spectroscopy of samples in various states of matter. For samples in the liquid phase, a setup was realized that utilizes the sample fluorescence for the acquisition of 2D spectra. Whereas the liquid-phase approach has been established before, coherent 2D spectroscopy on gaseous samples in a molecular beam as developed in this work is in fact a new method. It employs for the first time cations in a time-of-flight mass spectrometer for signal detection and was used to obtain the first ion-selective 2D spectra of a molecular-beam sample. Additionally, a new acquisition concept was developed in this thesis that significantly decreases measurement times in 2D spectroscopy using optimized sparse sampling and a compressed-sensing reconstruction algorithm.
Characteristic for the variant of 2D spectroscopy presented in this work is the usage of a phase-coherent sequence of four laser pulses in a fully collinear geometry for sample excitation. The pulse sequence was generated by a custom-designed pulse shaper that is capable of rapid scanning by changing the pulse parameters such as time delays and phases with the repetition rate of the laser. The sample's response was detected by monitoring incoherent observables that arise from the final-state population, for instance fluorescence or cations. Phase cycling, i.e., signal acquisition with different combinations of the relative phases of the excitation pulses, was applied to extract nonlinear signal contributions from the full signal during data analysis.
Liquid-phase 2D fluorescence spectroscopy was established with the laser dye cresyl violet as a sample molecule, confirming coherent oscillations previously observed in literature that are originating from vibronic coherences in specific regions of the 2D spectrum.
The data set of this experiment was used subsequently to introduce optimized sparse sampling in 2D spectroscopy. An optimization algorithm was implemented in order to find the best sampling pattern while taking only one quarter of the regular time-domain sampling points, thereby reducing the acquisition time by a factor of four. Signal recovery was based on a new and compact representation of 2D spectra using the von Neumann basis, which required about six times less coefficients than the Fourier basis to retain the relevant information. Successful reconstruction was shown by recovering the coherent oscillations in cresyl violet from a reduced data set.
Finally, molecular-beam coherent 2D spectroscopy was introduced with an investigation of ionization pathways in highly-excited nitrogen dioxide, revealing transitions to discrete auto-ionizing states as the dominant contribution to the ion signal. Furthermore, the advantage of the time-of-flight approach to obtain reactant and product 2D spectra simultaneously enabled the observation of distinct differences in the multiphoton-ionization response functions of the nitrogen dioxide cation and the nitrogen oxide ionic fragment.
The developed experimental techniques of this work will facilitate fast acquisition of 2D spectra for samples in various states of matter and permit reliable direct comparison of results. Therefore, they pave the way to study the properties of quantum coherences during photophysical processes or photochemical reactions in different environments.
It was the scope of this work to gain a deeper understanding of the correlation between Interface energetics of molecular semiconductors in planar organic solar cells and the corresponding optoelectronic characteristics. For this aim, different approaches were followed. At first, a direct variation of donor/acceptor (D/A) interface energetics of bilayer cells was achieved by utilizing systematically modified donor compounds. This change could be correlated to the macroscopic device performance. At second, the impact of interface energetics was illustrated, employing a more extended device architecture. By introducing a thin interlayer between a planar D/A heterojunction, an energetic staircase was established. Exciton dissociation in such devices could be linked to the cascade energy level alignment of the photo-active materials. Finally, two different fullerene molecules C60 and C70 were employed in co-evaporated acceptor phases. The expected discrepancy in their electronic structure was related to the transport properties of the corresponding organic photovoltaic cells (OPVCs). The fullerenes are created simultaneously in common synthesis procedures. Next to the photo-physical relevance, the study was carried-out to judge on the necessity of separating the components from each other by purification which constitutes the cost-determining step in the total production costs.
After examining suitable parameters for a newly designed system, dynamic SIPGP could be developed. For the first time, SIPGP was performed while applying a constant flow of monomer solution through the reaction system. This added a new parameter: the flow rate (rfl). Accordingly, this parameter was examined, comparing dynamic to static SIPGP. It could be shown, that by applying higher rfl to the system, the contact angle increases, which indicates a slower coating. The flow patterns inside the reactor were then modelled and calculated. These calculations indicated, that, due to higher flow velocities, the contact angle on the coated samples would be lower on the sides of the sample and higher in the middle. This finding was verified by contact angle measurements. The influence of dynamic SIPGP on the temperature inside the reaction chamber during the reaction was examined by temperature sensors inside the reactor. This showed, that the constant flow of monomer solution can be utilized to decrease the warming of the reaction solution during the reaction. Finally it was shown, that dynamic SIPGP can decrease the formation of bulk polymer on the sample, which is forming during the reaction. This enables SIPGP to fabricate more homogeneous coatings by applying a constant monomer flow.
Development, Simulation and Evaluation of Mobile Wireless Networks in Industrial Applications
(2023)
Manyindustrialautomationsolutionsusewirelesscommunicationandrelyontheavail-
ability and quality of the wireless channel. At the same time the wireless medium is
highly congested and guaranteeing the availability of wireless channels is becoming
increasingly difficult. In this work we show, that ad-hoc networking solutions can be
used to provide new communication channels and improve the performance of mobile
automation systems. These ad-hoc networking solutions describe different communi-
cation strategies, but avoid relying on network infrastructure by utilizing the Peer-to-
Peer (P2P) channel between communicating entities.
This work is a step towards the effective implementation of low-range communication
technologies(e.g. VisibleLightCommunication(VLC), radarcommunication, mmWave
communication) to the industrial application. Implementing infrastructure networks
with these technologies is unrealistic, since the low communication range would neces-
sitate a high number of Access Points (APs) to yield full coverage. However, ad-hoc
networks do not require any network infrastructure. In this work different ad-hoc net-
working solutions for the industrial use case are presented and tools and models for
their examination are proposed.
The main use case investigated in this work are Automated Guided Vehicles (AGVs)
for industrial applications. These mobile devices drive throughout the factory trans-
porting crates, goods or tools or assisting workers. In most implementations they must
exchange data with a Central Control Unit (CCU) and between one another. Predicting
if a certain communication technology is suitable for an application is very challenging
since the applications and the resulting requirements are very heterogeneous.
The proposed models and simulation tools enable the simulation of the complex inter-
action of mobile robotic clients and a wireless communication network. The goal is to
predict the characteristics of a networked AGV fleet.
Theproposedtoolswereusedtoimplement, testandexaminedifferentad-hocnetwork-
ing solutions for industrial applications using AGVs. These communication solutions
handle time-critical and delay-tolerant communication. Additionally a control method
for the AGVs is proposed, which optimizes the communication and in turn increases the
transport performance of the AGV fleet. Therefore, this work provides not only tools
for the further research of industrial ad-hoc system, but also first implementations of
ad-hoc systems which address many of the most pressing issues in industrial applica-
tions.
Mini Unmanned Aerial Vehicles (MUAVs) are becoming popular research platform and
drawing considerable attention, particularly during the last decade due to their afford- ability and multi-dimensional applications in almost every walk of life. MUAVs have obvious advantages over manned platforms including their much lower manufacturing and operational costs, risk avoidance for human pilots, flying safely low and slow, and realization of operations that are beyond inherent human limitations. The advancement in Micro Electro-Mechanical System (MEMS) technology, Avionics and miniaturization of sensors also played a significant role in the evolution of MUAVs. These vehicles range from simple toys found at electronic supermarkets for entertainment purpose to highly sophisticated commercial platforms performing novel assignments like offshore wind power station inspection and 3D modelling of buildings etc. MUAVs are also more environment friendly as they cause less air pollution and noise. Unmanned is therefore unmatched. Recent research focuses on use of multiple inexpensive vehicles flying together, while maintaining required relative separations, to carry out the tasks efficiently compared to a single exorbitant vehicle. Redundancy also does away the risk of loss of a single whole-mission dependent vehicle. Some of the valuable applications in the domain of cooperative control include joint load transportation, search and rescue, mobile communication relays, pesticide spraying and weather monitoring etc. Though realization of multi-UAV coupled flight is complex, however obvious advantages justify
the laborious work involved...
Ongoing changes in spaceflight – continuing miniaturization, declining costs of rocket launches and satellite components, and improved satellite computing and control capabilities – are advancing Satellite Formation Flying (SFF) as a research and application area. SFF enables new applications that cannot be realized (or cannot be realized at a reasonable cost) with conventional single-satellite missions. In particular, distributed Earth observation applications such as photogrammetry and tomography or distributed space telescopes require precisely placed and controlled satellites in orbit.
Several enabling technologies are required for SFF, such as inter-satellite communication, precise attitude control, and in-orbit maneuverability. However, one of the most important requirements is a reliable distributed Guidance, Navigation and Control (GNC) strategy. This work addresses the issue of distributed GNC for SFF in 3D with a focus on Continuous Low-Thrust (CLT) propulsion satellites (e.g., with electric thrusters) and concentrates on circular low Earth orbits. However, the focus of this work is not only on control theory, but control is considered as part of the system engineering process of typical small satellite missions. Thus, common sensor and actuator systems are analyzed to derive their characteristics and their impacts on formation control. This serves as the basis for the design, implementation, and evaluation of the following control approaches: First, a Model Predictive Control (MPC) method with specific adaptations to SFF and its requirements and constraints; second, a distributed robust controller that combines consensus methods for distributed system control and $H_{\infty}$ robust control; and finally, a controller that uses plant inversion for control and combines it with a reference governor to steer the controller to the target on an optimal trajectory considering several constraints. The developed controllers are validated and compared based on extensive software simulations. Realistic 3D formation flight scenarios were taken from the Networked Pico-Satellite Distributed System Control (NetSat) cubesat formation flight mission. The three compared methods show different advantages and disadvantages in the different application scenarios. The distributed robust consensus-based controller for example lacks the ability to limit the maximum thrust, so it is not suitable for satellites with CLT. But both the MPC-based approach and the plant inversionbased controller are suitable for CLT SFF applications, while showing again distinct advantages and disadvantages in different scenarios.
The scientific contribution of this work may be summarized as the creation of novel and specific control approaches for the class of CLT SFF applications, which is still lacking methods withstanding the application in real space missions, as well as the scientific evaluation and comparison of the developed methods.
Remote sensing time series is the collection or acquisition of remote sensing data in a
fixed equally spaced time period over a particular area or for the whole world. Near
daily high spatial resolution data is very much needed for remote sensing applications
such as agriculture monitoring, phenology change detection, environmental
monitoring and so on. Remote sensing applications can produce better and accurate
results if they are provided with dense and accurate time series of data. The current
remote sensing satellite architecture is still not capable of providing near daily
or daily high spatial resolution images to fulfill the needs of the above mentioned
remote sensing applications. Limitations in sensors, high development, operational
costs of satellites and presence of clouds blocking the area of observation are some
of the reasons that makes near daily or daily high spatial resolution optical remote
sensing data highly challenging to achieve. With developments in the optical sensor
systems and well planned remote sensing satellite constellations, this condition
can be improved but it comes at a cost. Even then the issue will not be completely
resolved and thus the growing need for high temporal and high spatial resolution
data cannot be fulfilled entirely. Because the data collection process relies on satellites
which are physical system, these can fail unpredictably due to various reasons
and cause a complete loss of observation for a given period of time making a gap
in the time series. Moreover, to observe the long term trend in phenology change
due to rapidly changing environmental conditions, the remote sensing data from
the present is not just sufficient, the data from the past is also important. A better
alternative solution for this issue can be the generation of remote sensing time series
by fusing data from multiple remote sensing satellite which has different spatial and
temporal resolutions. This approach will be effective and efficient. In this method
a high temporal low spatial resolution image from a satellite such as Sentinel-2 can
be fused with a low temporal and high spatial resolution image from a satellite such
as the Sentinel-3 to generate a synthetic high temporal high spatial resolution data.
Remote sensing time series generation by data fusion methods can be applied to
the satellite images captured currently as well as the images captured by the satellites
in the past. This will provide the much needed high temporal and high spatial
resolution images for remote sensing applications. This approach with its simplistic
nature is cost effective and provides the researchers the means to generate the
data needed for their application on their own from the limited source of data available
to them. An efficient data fusion approach in combination with a well planned
satellite constellation can offer a solution which will ensure near daily time series of
remote sensing data with out any gap. The aim of this research work is to develop
an efficient data fusion approaches to achieve dense remote sensing time series.
Metallic nano-optical systems allow to confine and guide light at the nanoscale,
a fascinating ability which has motivated a wide range of fundamental as well
as applied research over the last two decades. While optical antennas provide
a link between visible radiation and localized energy, plasmonic waveguides
route light in predefined pathways. So far, however, most experimental demonstrations
are limited to purely optical excitations, i.e. isolated structures are
illuminated by external lasers. Driving such systems electrically and generating
light at the nanoscale, would greatly reduce the device footprint and pave the
road for integrated optical nanocircuitry. Yet, the light emission mechanism as
well as connecting delicate nanostructures to external electrodes pose key challenges
and require sophisticated fabrication techniques. This work presents various
electrically connected nano-optical systems and outlines a comprehensive
production line, thus significantly advancing the state of the art. Importantly,
the electrical connection is not just used to generate light, but also offers new
strategies for device assembly. In a first example, nanoelectrodes are selectively
functionalized with self-assembled monolayers by charging a specific electrode.
This allows to tailor the surface properties of nanoscale objects, introducing an
additional degree of freedom to the development of metal-organic nanodevices.
In addition, the electrical connection enables the bottom-up fabrication of tunnel
junctions by feedback-controlled dielectrophoresis. The resulting tunnel barriers
are then used to generate light in different nano-optical systems via inelastic
electron tunneling. Two structures are discussed in particular: optical Yagi-Uda
antennas and plasmonic waveguides. Their refined geometries, accurately fabricated
via focused ion beam milling of single-crystalline gold platelets, determine
the properties of the emitted light. It is shown experimentally, that Yagi-Uda
antennas radiate light in a specific direction with unprecedented directionality,
while plasmonic waveguides allow to switch between the excitation of two
propagating modes with orthogonal near-field symmetry. The presented devices
nicely demonstrate the potential of electrically connected nano-optical systems,
and the fabrication scheme including dielectrophoresis as well as site-selective
functionalization will inspire more research in the field of nano-optoelectronics.
In this context, different future experiments are discussed, ranging from the
control of molecular machinery to optical antenna communication.