Refine
Has Fulltext
- yes (2)
Is part of the Bibliography
- yes (2)
Document Type
- Doctoral Thesis (2)
Language
- English (2) (remove)
Keywords
- Sol-Gel-Verfahren (2) (remove)
Institute
- Lehrstuhl für Silicatchemie (2) (remove)
Starting off with solubility experiments of possible precursors, the present study reveals the whole development of a sol gel processing route for transparent p type semiconductive thin films with delafossite structure right to the fabrication of functional p-n junctions. The versatile sol formulation could successfully be modified for several oxide compositions, enabling the synthesis of CuAlO2, CuCrO2, CuMnO2, CuFeO2 and more. Although several differences in the sintering behaviour of powders and thin films could be observed, the powder experiments significantly contributed to the clearification of the intricate phase development during thermal annealing and also to optimization of the annealing sequence for thin film processing. Two different ternary systems turned out to be the most promising candidates for p-TCO application: Copper aluminum oxide for its high optical transmittance and copper chromium oxide for its low synthesis temperature, which allowed thin film deposition on low-cost borosilicate substrates. In order to combine the advantages of these two systems, the quaternary oxide composition CuAl1-xCrxO2 was investigated. With a higher optical transmittance than CuCrO2, a lower synthesis temperature than CuAlO2 and a lower resistivity than both parent systems, the optimum composition of the quaternary oxide is reached for x = 0.50. Compared to physical vapour deposition techniques, the undoped thin films presented here still need to make up some deficites in their optoelectronic performance. Although the best sol-gel samples are able to compete with RF sputtered samples or sampes deposited by PLD in transmittance, their resistivity is almost two orders of magnitude higher. The most probable reasons for this are the characteristic imperfections of sol-gel thin films like porosity and small crystallite size, which create barriers like grain boundaries and bottlenecks like barely connected particles. By additional effort such shortcomings can be repelled to a certain extend, but nevertheless the density of undoped sol-gel material always stays behind its pendants processed by physical vapour deposition.[246] Furthermore, such additional endeavour is likely to annihilate the advantage of sol-gel technique in processing costs. Extrinsic doping is a common method to decrease the resistivity of delafossite materials. Partially replacing the trivalent cations by divalent ones creates additional holes and thus generates additional charge carriers for p-type semiconductivity. This can improve the conductivity of delafossites by up to three orders of magnitude. Due to the compositorial flexibility of sol-gel processing, dopants could be introduced easily in this study by soluble precursors. However, improving the conductivity of CuAlO2 and CuAl0.5Cr0.5O2 via this method failed. Actually, this seems to be due to the fact that instead of being incorporated into the delafossite phase the dopant ions form intransparent phase impurities like spinels, which interfere with optical transmittance of the thin films. On the contrary, doping had a positive effect on the conductivity and the optical transmittance of copper chromium oxide, with magnesium being the most effective dopant. The resistivity could be decreased by more than three orders of magnitude, but in order to achieve this, much higher Mg concentrations than by other thin film deposition methods were necessary. This indicates a low doping efficiency in sol gel processed thin films, but also the ability of sol gel processing to incorporate more magnesium into the oxide than any other processing method. The extensive substitution of the chromium ions also increases the optical transmittance and allows sol gel processed thin films to draw level with thin films deposited by sputtering methods or PLD. Finally, the applicability of the delafossite thin films was proven by the asymmetric current voltage characteristics of heterojunctions between ITO and the delafossites. Shunting problems of the metallic contacts, on the other hand, reveal structural deficites of the delafossites, which should be the subject of further investigations.
The aim of this work was to test and tailor new sol gel derived hybrid polymer coatings for the incorporation of photochromic spirooxazines and chromenes. The development and optimisation of work was performed via two different routes (dye and matrix ones), that led to photochromic multi-layer coating systems with coloration depth and photostabilities comparable to commercially available products. Hybrid sol-gel derived polymers were found to be suitable host materials for photochromic dyes. Matrix properties and the type of entrapment heavily influence the photochromic activity, as well as the degradation rate and the kinetics of incorporated dyes. Dyes incorporated within more polar and rigid matrices were found to show slower kinetics and higher coloration but associated with faster photodegradation. On the other hand, hosts with less polar sites, low residual water concentration and low rigidity are preferable in terms of photostability. Significant differences were found for physically incorporated and covalently grafted chromophores. Using silylated dyes that can participate in the sol-gel process, the photodegradation rate of the whole system can be decreased as compared to the physically entrapped systems. The higher photostability and slower kinetics for covalently bonded photochromes is probably due to sterical hindrance. Addition of proper stabilisers increases the photostability: The employment of UV light stabilisers, excited state quenchers and HALS was found to be beneficial but not sufficient. Besides the presence of stabilisers, also the reduction of oxygen migration into the coating (by a hard top coat and an inorganic anti reflective coating) strongly increases stability of photochromes. Finally, it was found that the separation of photochromes within two (or more) different layers leads to a further improvement of the coloration and fatigue behaviour of the whole coating stack, presumably by preventing the contact of dye molecules with excited states of other molecules or their degradation products. These latter findings are considered to pave the way for stable photochromic coatings based on hybrid polymers. Future development should be directed towards more photostable yellow and red switching dyes. The results of the present investigations should help to choose the most suitable molecular environments for the tested photochromes in terms of photostability, kinetics and activity, which is considered relevant with respect to potential applications, in particular in the ophthalmic sector. Furthermore, the interesting combination of properties of this type of materials offers a large potential with regard to many applications, such as coatings for sunglasses, radiation protectors, filters, sunroofs, reversible markings, printing applications and smart textiles.