Refine
Has Fulltext
- yes (18)
Is part of the Bibliography
- yes (18)
Document Type
- Journal article (16)
- Doctoral Thesis (2)
Language
- English (18) (remove)
Keywords
- 3D printing (2)
- TMD (2)
- additive manufacturing (2)
- clinical practice (2)
- dental education (2)
- printed tooth (2)
- student training (2)
- Akupunktur (1)
- Bruxismus (1)
- CAD (1)
Institute
- Poliklinik für Zahnärztliche Prothetik (18) (remove)
Background and Objective
The aim of this single‐centre, two‐arm, parallel‐group, double‐blinded, randomised controlled trial was to investigate the disputed specific effectiveness of acupuncture by comparing acupuncture on specific and non‐specific points among patients with non‐chronic, painful TMDs.
Methods
Following predefined eligibility criteria, 49 consecutive patients of both sexes were recruited to the study. All subjects were diagnosed with a non‐chronic (Graded Chronic Pain Scale grade <3) painful TMD, as assessed using the Diagnostic Criteria for Temporomandibular Disorders (DC/TMD). Patients were randomly assigned to group A (acupuncture on specific points) or group B (acupuncture on non‐specific points) after the initial examination (T0). Both acupuncture treatment sessions were conducted by a trained dentist once a week for four weeks. The examination was repeated five weeks (T5) after T0 by one calibrated examiner who was unaware of the study groups. Characteristic pain intensity (CPI) was evaluated as the main outcome criterion and compared between times and treatment groups by means of non‐parametric tests (significance level set at P = .05). Secondary outcomes comprised the maximum corrected active mouth‐opening without pain (MAO); patients’ expectations regarding acupuncture treatment and pain development; depressivity; and oral health‐related quality of life (OHRQoL).
Results
A total of 41 patients (38 female) successfully completed the study (mean age: 40.17 ± 16.61). The two groups did not differ significantly at any time in terms of age and CPI. However, CPI was significantly (P < .05) lower at T5 than at T0 for both groups (29.66 and 30.35% lower in group A and group B, respectively). An increase in MAO was observed at T5 for both groups but was significant for group B only (P = .016). All patients had positive expectations of acupuncture therapy, and the two groups did not differ significantly at T5 with regard to the extent to which their expectations had been fulfilled by the treatment (P = .717). Comparison of T0 and T5 showed a statistically significant reduction of depressivity for group A (P = .0205), but no significant change for group B (P = .329). At T5, OHRQoL had improved significantly for both groups (group A, P = .018; group B, P < .001) compared with at T0.
Conclusions
Acupuncture on both specific and non‐specific points reduces the non‐dysfunctional pain of TMD patients. The effect of acupuncture on painful TMD cannot be attributed to the specific point selection.
Medication-related osteonecrosis of the jaw (MRONJ) represents an adverse side effect of antiresorptive and antiangiogenic medications. It is associated with impaired quality of life, oral health, and oral function and can be classified into various stages. The purpose of this prospective clinical study is to evaluate the impact of stages I and II MRONJ on oral-health-related quality of life (OHRQoL) and related parameters. Patients’ OHRQoL, satisfaction with life, oral discomfort, and oral health were assessed using the German version of the Oral Health Impact Profile (OHIP-G49), visual analog scales (VAS), and Satisfaction with Life Scale (SWLS) at baseline (T0), 10 days (T1), and 3 months after treatment (T2) in 36 patients. Data were analyzed using Kolmogorov–Smirnov test, two-way mixed ANOVAs, and follow-up Mann–Whitney U tests. The impact of treatment effects on the original seven OHIP domain structures and the recently introduced four-dimensional OHIP structure were evaluated using linear regression analysis. Thirty-six patients received surgical MRONJ treatment. Before treatment, patients’ perceived OHRQoL, oral discomfort, oral health, and satisfaction with life were negatively affected by MRONJ. Surgical treatment significantly improved OHRQoL and related parameters (all p ≤ 0.012). This improvement was greater in patients with higher impairment at T0. OHRQoL and oral restrictions were still impaired after treatment in patients who needed prosthetic treatment. The four-dimensional structure revealed valuable information beyond the standard seven OHIP domains. Increased awareness of MRONJ risks and an interdisciplinary treatment approach for MRONJ patients are needed.
Background
Clinical decision-making and prognostic statements in individuals with manifest or suspected temporomandibular disorders (TMDs) may involve assessment of (a) the position of articular disc relative to the mandibular condyle, (b) the location of the condyle relative to the temporal joint surfaces, and (c) the depth of the glenoid fossa of the temporomandibular joints (TMJs). The aim of this study was twofold: (1) Determination of the prevalence of these variables in two representative population-based birth cohorts. (2) Reinterpretation of the clinical significance of the findings.
Methods
From existing magnetic resonance imaging (MRI) scans of the TMJs that had been taken in 2005 and 2006 from 72 subjects born between 1930 and 1932 and between 1950 and 1952, respectively, the condylar position at closed jaw was calculated as percentage displacement of the condyle from absolute centricity. By using the criteria introduced by Orsini et al. (Oral Surg Oral Med Oral Pathol Oral Radiol Endod 86:489-97, 1998), a textbook-like disc position at closed jaw was distinguished from an anterior location. TMJ morphology of the temporal joint surfaces was assessed at open jaw by measuring the depth of the glenoid fossa, using the method proposed by Muto et al. (J Oral Maxillofac Surg 52:1269-72, 1994).
Frequency distributions were recorded for the condylar and disc positions at closed jaw.
Student’s t-test with independent samples was used as test of significance to detect differences of condylar positions between the age cohorts (1930 vs. 1950) and the sexes. The significance levels were set at 5%. First, the results from the measurement of the age cohorts were compared without differentiation of sexes, i.e., age cohort 1930–1932 versus age cohort 1950–1952. Subsequently, the age cohorts were compared by sex, i.e., men in cohort 1930–1932 versus men in cohort 1950–1952, and women in cohort 1930–1932 women men in cohort 1950–1952.
Results
In both cohorts, condylar position was characterized by great variability. About 50% of the condyles were located centrically, while the other half was either in an anterior or in a posterior position. In both female cohorts, a posterior position predominated, whereas a centric position prevailed among men. Around 75% of the discs were positioned textbook-like, while the remaining forth was located anteriorly. Age had no statistically significant influence on condylar or on disc position. Conversely, comparison between the age groups revealed a statistically significant decrease of the depth of the glenoid fossa in both older cohorts. This age-dependent changes may be interpreted as flattening of the temporal joint surfaces.
Conclusions
We call for a re-interpretation of imaging findings because they may insinuate pathology which usually is not present. Instead, anterior or posterior positions of the mandibular condyle as well as an anterior location of the articular disc should be construed as a variation of normalcy. Likewise, flattening of articular surfaces of the TMJs may be considered as normal adaptive responses to increased loading, rather than pathological degenerative changes.
Objectives
In this in-vitro study, teeth were imaged using photoacoustic tomography (PAT), cone-beam computed tomography (CBCT), and micro-computed tomography (μ-CT). The study had aim: to identify the best wavelength for PAT images to determine the accuracy of the three imaging methods, and to determine whether PAT images of teeth can achieve acceptable reconstruction quality.
Methods
Nineteen human mandibular single-rooted incisors were extracted from patients with trauma or periodontitis. To determine the best wavelength for acquiring photoacoustic images, all 19 teeth were scanned in vitro with PAT, using different laser wavelengths between 680 and 960 nm. The images were analyzed using image analysis software. To assess the accuracy of PAT and compare it with the accuracy of CBCT, each tooth was also scanned in vitro using CBCT and the reference standard technique of μ-CT. Subsequently, three different three-dimensional models, one for each imaging technique, were created for each tooth. Finally, the three different three-dimensional models acquired for the same tooth were matched and analyzed regarding volume and surface.
Results
The highest quality tooth images were achieved using the 680 nm wavelength, which showed the best contrast ratio. The full geometry of the dental root (μ-CT compared with PAT) could be visualized with relative standard deviations of 0.12 mm for the surface and −7.33 mm3 for the volume (n = 19). The full geometry of the dental root (μ-CT compared with CBCT) could be visualized with relative standard deviations of 0.06 mm for the surface and −14.56 mm3 for the volume (n = 19). The difference between the PAT–μ-CT group and CBCT–μ-CT group regarding the total average of the root surface area was not significant (p>0.06).
Conclusion
Images, which were acquired using PAT at 680nm showed the best contrast ration, enabling the identification of dentin, cementum and the dental pulp. No significant differences were found between the PAT–μ-CT group and CBCT–μ-CT group regarding the total average of the RSA and the total volume. Thus, three-dimensional reconstructions based on in-vitro PAT are already of acceptable reconstruction quality.
Background: This randomized clinical trial was conducted to assess whether sleep bruxism (SB) is associated with an increased rate of technical complications (ceramic defects) in lithium disilicate (LiDi) or zirconia (Z) molar single crowns (SCs). Methods: Adult patients were classified as affected or unaffected by SB based on structured questionnaires, clinical signs, and overnight portable electromyography (BruxOff) and block randomized into four groups according to SB status and crown material (LiDi or Z): LiDi-SB (n = 29), LiDi-no SB (n = 24), Z-SB (n = 23), and Z-no SB (n = 27). Differences in technical complications (main outcome) and survival and success rates (secondary outcomes) one year after crown cementation were assessed using Fisher’s exact test with significance level α = 0.05. Results: No technical complications occurred. Restoration survival rates were 100% in the LiDi-SB and LiDi-no SB groups, 95.7% in the Z-SB group, and 96.3% in the Z-no SB group (p > 0.999). Success rates were 96.6% in the LiDi-SB group, 95.8% in the LiDi-no SB group (p > 0.999), 91.3% in the Z-SB group, and 96.3% in the Z-no SB group (p ≥ 0.588). Conclusions: With a limited observation time and sample size, no effect of SB on technical complication, survival, and success rates of molar LiDi and Z SCs was detected.
The aim of this study was to identify correlations between sleep bruxism (SB) and temporomandibular disorders (TMD) as diagnosed by means of the research diagnostic criteria for temporomandibular disorders (RDC/TMD). Sleep bruxism was diagnosed on the basis of I) validated questionnaires, II) clinical symptoms, and III) electromyographic/electrocardiographic data. A total of 110 subjects were included in the study. Fifty-eight patients were identified as bruxers and 52 as nonbruxers. A psychosocial assessment was also performed. An RDC/TMD group-I diagnosis (myofascial pain) was made for 10 out of 58 bruxers, whereas none of the nonbruxers received a diagnosis of this type. No significant differences were found between bruxers and nonbruxers with regard to RDC/TMD group-II (disc displacement) and group-III (arthralgia, arthritis, arthrosis) diagnoses. Somatization was significantly more common among bruxers than nonbruxers. Multivariate logistic regression analysis revealed that somatization was the only factor significantly correlated with the diagnosis of myofascial pain. The results of this study indicate a correlation between myofascial pain, as diagnosed using the RDC/TMD, and somatization. It seems that somatization is a stronger predictor of an RDC/TMD diagnosis of myofascial pain than sleep bruxism is.
The main objective of this study was to test whether subjects with different degrees of bruxism differ regarding EMG parameters and whether CES intervention affects those parameters. The hypothesis was that CES influences EMG parameters and after its’ cessation, all EMG parameters return to baseline (exposure–response relationship).
For this purpose, forty subjects were examined, 16 men and 24 women, matched for age and gender and assigned randomly in the intervention (N=20) and control group (N=20). The procedure was as follows: 1-week inactive GC (N=40), 2 weeks inactive/active GC (N=20/N=20), 2 weeks inactive GC (N=40). Each interval was followed by a surface EMG recording from eight muscle parts (right and left anterior -, medial -, and posterior masseter and right and left anterior temporalis) under force-controlled feedback (BiteFork®) with three submaximal bite forces. The resulting EMG activity is expressed as RMS % MVC and RMS at MVC. The statistics is performed with t-test, one-way rmANOVA, and Friedman rmANOVA on ranks, according to the distribution of the data. The significance level was set at p≤0.05.
The results generated from the within-groups and between-groups comparison were mostly not statistically significant and could therefore not offer clinically relevant conclu-sions.
However, it cannot be excluded that a higher submaximal bite force and an extended intervention interval would have rendered different outcomes. The insufficient study sample resulted in a low observed power which makes the findings prone to Type II er-ror. It can be concluded that this study did not find any substantiating differences be-tween the EMG values of participants with various bruxism activity and that CES could not influence the studied EMG parameters in the two weeks intervention time.
Our hypothesis which supposes that subjects with high and low bruxism activity differ in RMS % MVC could not be verified. However, with the gained knowledge, it is recom-mended to further elaborate a definite bruxism diagnosis by using portable EMG devices.
Positional plagiocephaly (PP) is the most common skull deformity in infants. Different classification systems exist for graduating the degree of PP, but all of these systems are based on two-dimensional (2D) parameters. This limitation leads to several problems stemming from the fact that 2D parameters are used to classify the three-dimensional (3D) shape of the head. We therefore evaluate existing measurement parameters and validate a newly developed 3D parameter for quantifying PP. Additionally, we present a new classification of PP based on a 3D parameter. 210 patients with PP and 50 patients without PP were included in this study. Existing parameters (2D and 3D) and newly developed volume parameters based on a 3D stereophotogrammetry scan were validated using ROC curves. Additionally, thresholds for the new 3D parameter of a 3D asymmetry index were assessed. The volume parameter 3D asymmetry index quantifies PP equally as well as the gold standard of 30° diagonal difference. Moreover, a 3D asymmetry index allows for a 3D-based classification of PP. The 3D asymmetry index can be used to define the degree of PP. It is easily applicable in stereophotogrammetric datasets and allows for comparability both intra- and inter-individually as well as for scientific analysis.
Artificial intelligence (AI) has already arrived in many areas of our lives and, because of the increasing availability of computing power, can now be used for complex tasks in medicine and dentistry. This is reflected by an exponential increase in scientific publications aiming to integrate AI into everyday clinical routines. Applications of AI in orthodontics are already manifold and range from the identification of anatomical/pathological structures or reference points in imaging to the support of complex decision-making in orthodontic treatment planning. The aim of this article is to give the reader an overview of the current state of the art regarding applications of AI in orthodontics and to provide a perspective for the use of such AI solutions in clinical routine. For this purpose, we present various use cases for AI in orthodontics, for which research is already available. Considering the current scientific progress, it is not unreasonable to assume that AI will become an integral part of orthodontic diagnostics and treatment planning in the near future. Although AI will equally likely not be able to replace the knowledge and experience of human experts in the not-too-distant future, it probably will be able to support practitioners, thus serving as a quality-assuring component in orthodontic patient care.
Fraser syndrome (FS) is a rare autosomal recessive multiple congenital malformation syndrome characterized by cryptophthalmos, cutaneous syndactyly, renal agenesis, ambiguous genitalia, and laryngotracheal anomalies. It is caused by biallelic mutations of FRAS1, FREM2, and GRIP1 genes, encoding components of a protein complex that mediates embryonic epithelial–mesenchymal interactions. Anecdotal reports have described abnormal orodental findings in FS, but no study has as yet addressed the orodental findings of FS systematically. We reviewed dental radiographs of 10 unrelated patients with FS of different genetic etiologies. Dental anomalies were present in all patients with FS and included hypodontia, dental crowding, medial diastema, and retained teeth. A very consistent pattern of shortened dental roots of most permanent teeth as well as altered length/width ratio with shortened dental crowns of upper incisors was also identified. These findings suggest that the FRAS1–FREM complex mediates critical mesenchymal–epithelial interactions during dental crown and root development. The orodental findings of FS reported herein represent a previously underestimated manifestation of the disorder with significant impact on orodental health for affected individuals. Integration of dentists and orthodontists into the multidisciplinary team for management of FS is therefore recommended.