Refine
Has Fulltext
- yes (36)
Is part of the Bibliography
- yes (36)
Year of publication
- 2019 (36) (remove)
Document Type
- Journal article (19)
- Doctoral Thesis (15)
- Preprint (2)
Keywords
- Perylenderivate (3)
- Supramolekulare Chemie (3)
- Ancistrocladaceae (2)
- Malaria (2)
- Merocyanine (2)
- Naphthylisochinolin-Alkaloide (2)
- Selbstassemblierung (2)
- Selbstorganisation (2)
- boranes (2)
- cell imaging (2)
Institute
- Institut für Organische Chemie (36) (remove)
Stereospecific Synthesis and Photophysical Properties of Propeller-Shaped C\(_{90}\)H\(_{48}\) PAH
(2019)
Herein, we have synthesized an enantiomerically pure propeller‐shaped PAH, C\(_{90}\)H\(_{48}\), possessing three [7]helicene and three [5]helicene subunits. This compound can be obtained in gram quantities in a straightforward manner. The photophysical and chiroptical properties were investigated using UV/Vis absorption and emission, optical rotation and circular dichroism spectroscopy, supported by DFT calculations. The nonlinear optical properties were investigated by two‐photon absorption measurements using linearly and circularly polarized light. The extremely twisted structure and packing of the homochiral compound were investigated by single‐crystal X‐ray diffraction analysis.
By introduction of four hydroxy (HO) groups into the two perylene bisimide (PBI) bay areas, new HO‐PBI ligands were obtained which upon deprotonation can complex ZnII ions and photosensitize semiconductive zinc oxide thin films. Such coordination is beneficial for dispersing PBI photosensitizer molecules evenly into metal oxide films to fabricate organic–inorganic hybrid interlayers for organic solar cells. Supported by the photoconductive effect of the ZnO:HO‐PBI hybrid interlayers, improved electron collection and transportation is achieved in fullerene and non‐fullerene polymer solar cell devices, leading to remarkable power conversion efficiencies of up to 15.95 % for a non‐fullerene based organic solar cell.
Die Liste der interessanten nachzuweisenden Analyte ist lang. Deswegen besteht ein großer Bedarf zur Entwicklung neuer fluoreszierender und kolorimetrischer Chemosensoren. Ziel der vorliegenden Arbeit war daher die Synthese und Charakterisierung neuer optischer bzw. fluoreszierender und kolorimetrischer Chemosensoren mit dem Fokus auf die beiden Substanzklassen der Naphthalinbisimide und Perylenbisimide.
Der erste Arbeitsschwerpunkt befasste sich mit wasserlöslichen Naphthalinbisimiden und ist in drei Unterkapitel aufgeteilt (Kapitel III – 1.1.-1.3., Abbildung 79). Im ersten Unterkapitel (Kapitel III – 1.1.) wurden die Synthesen und optischen Eigenschaften der am Kern Amino-substituierten NBIs 60a-h, mit Dicarbonsäureresten in Imid-Position und 61a-h, mit 2-Dimethylaminoethyl-Gruppen, in polaren Lösungsmitteln beschrieben. Die systematische Anbringung verschiedener Amino-Substituenten mit steigendem elektronenziehendem Charakter der Aminoreste diente der mechanistischen Aufklärung der optischen Eigenschaften. Eine vollständige Untersuchung der optischen Eigenschaften erfolgte in wässriger Pufferlösung bei pH 2.1 sowie in Methanol und Acetonitril. Der Einfluss der Imid-Substituenten auf die optischen Eigenschaften war wie zu erwarten gering. Die verschiedenen Kern-Substituenten verursachten hingegen eine hypsochrome Verschiebung der Absorptions- und Fluoreszenzmaxima mit steigendem elektronenziehendem Charakter der an der Aminogruppe angebrachten Reste. Ein unerwarteter Trend konnte im Fall der Fluoreszenzquantenausbeute beobachtet werden. In den protischen Lösungsmitteln Wasser und Methanol wurde eine lineare Abhängigkeit gegenüber der Hammett-σmeta-Konstante ermittelt. Mit steigendem elektronenziehendem Charakter der Kern-Amino-Substituenten erfuhr die Quantenausbeute einen Anstieg auf bis zu 39% in Wasser für NBI 60h, 61h und 45% in Methanol für 60h. Die Tatsache, dass in Acetonitril keine solche Abhängigkeit gegenüber der Hammett-Konstante beobachtet werden konnte legte eine intermolekulare Wasserstoffbrücken-Bindung im angeregten Zustand als konkurrierenden Prozess zur Fluoreszenz nahe. Dieser Prozess tritt zwischen den Lösungsmittel-Molekülen und der Akzeptorgruppe (Carbonyl-Sauerstoff) der NBIs, welcher einen strahlungslosen Relaxationsprozess bzw. Fluoreszenzlöschung zur Folge hat, auf. Der Einfluss dieses Prozesses lässt sich durch die Stärke des elektronenziehenden Amino-Substituentens steuern. Die NBIs 60a-h zeigten zudem in potentiometrischen Titrationen in Wasser eine pH-Unabhängigkeit der optischen Eigenschaften bezüglich des Imid-Substituentens. Dies macht die NBIs mit Dicarbonsäureresten für die Anwendung in biologischen Systemen im neutralen pH-Milieu oder als chemische Sensoren besonders geeignet.
Aufgrund dieser interessanten Befunde wurde im zweiten Unterkapitel (Kapitel III – 1.2.) das dihalogenierte NBI 58 hinsichtlich der Sensoreigenschaften gegenüber primären, sekundären und tertiären Amin- bzw. Diamindampf sowie zur Frischekontrolle von Fleisch untersucht. Die Absorptions- und Fluoreszenz-spektroskopische Untersuchung des Dünnschichtfilms von NBI 58 zeigte die erfolgreiche, selektive Detektion von primären Aminen und Diaminen bzw. biogenen Aminen. Zum einen konnte mit bloßen Auge ein Farbumschlag von gelb nach rot und zum anderen Änderungen in den Absorptionsspektren wie die Entstehung einer neuen bathochrom verschobenen Bande im Dünnschichtfilm beobachtet werden. Die Erhöhung der Fluoreszenz wie auch die NMR-spektroskopische Untersuchung konnte hingegen ausschließlich in Lösung detektiert werden. Hiermit konnte die kovalente Wechselwirkung der Amin-Moleküle mit dem NBI 58 nachgewiesen werden. Trotz der erfolgreichen Detektion biogener Amindämpfe erwies sich NBI 58 aufgrund der zu geringen Reaktivität als ungeeigneter chemischer Sensor zur Frischekontrolle von Fleisch.
Das dritte und letzte Unterkapitel (Kapitel III – 1.3.) dieses Abschnittes bestand in der Synthese monochlor-monoamino-substituierter NBIs am Kern (65a,b und 66) und der Wechselwirkungen dieser Farbstoffe mit DNS/RNS. Die NBIs 65a,b und 66 wiesen in der Imidstellung 3-Trimethylammoniumpropyl auf, um die Wasserlöslichkeit zu gewährleisten und die elektrostatische Wechselwirkung mit dem negativ geladenen Phosphatrückgrad der DNS/RNS zu bewirken. Am Kern wurden die Aminosäuren (S)-2,3-Diaminopropionsäure (L-Dap) (65a) und (S)-2,6-Diaminohexansäure (L-Lys) (65b) sowie 2-Trimethylammoniumethylamin (66) eingefügt. Die Untersuchungen mit Hilfe von thermischen Denaturierungsstudien zeigten mit allen NBIs eine deutliche Schmelzpunkterhöhung der DNS/RNS (ΔTm-Werte zwischen 17 und 35 °C), was die Bildung von NBI/Polynukleotid-Komplexen nahelegte. Diese Komplex-Bildung konnte erneut aufgrund enormer Fluoreszenzlöschung in fluorimetrischen Titrationsstudien bestätigt werden. Hier wurden Bindungskonstanten zwischen logK = 5.9 und 7.2 M-1 ermittelt, wobei NBI 65a und poly(dG-dC)2 der stärksten Bindungsaffinität und NBI 65a und poly(dA-dT)2 der schwächste zugeordnet werden konnte. Für NBI 66 wurde die zweithöchste Bindungsaffinität zu Polynukleotid ct-DNS (logK = 7.08 M-1) beobachtet, während dieser Farbstoff sowie 65a,b nur geringe Bindungskonstanten mit dem Polynukleotid polyA-polyU zeigten. Mit Hilfe der CD-spektroskopischen Messungen wurde der Bindungsmodus und die Unterschiede in den Bindungseigenschaften der Farbstoffe mit DNS/RNS ermittelt. Der Großteil aller NBI-Verbindungen interkalierte in einer parallelen Anordnung zwischen die Basenpaare der Polynukleotide. Für NBI 65a und poly(dG-dC)2 ließ sich jedoch eine perpendikulare Anordnung zu den Basenpaaren beobachten. ITC-Titrationsstudien komplettierten letztendlich die Untersuchungen zwischen NBIs und Polynukleotiden. Neben Interkalation als Bindungsmodus konnte zusätzlich aufgrund der relativ hohen Entropiewerte eine Wechselwirkung zwischen den Substituenten am Kern und den Phosphatgruppen in der kleinen Furche festgestellt werden. Zusammengefasst sind die sterischen Hinderungen der Amino-Substituenten und die Furcheneigenschaften von ds-DNS/RNS entscheidend.
Der zweite Arbeitsschwerpunkt ist ebenfalls in drei Unterkapitel (Kapitel III – 2.1.-2.3.) aufgeteilt und befasste sich mit der Synthese und den Sensoreigenschaften kernfunktionalisierter Perylenbisimide (Abbildung 80). Im ersten Abschnitt (Kapitel III – 2.1) wurde die Synthese und die optischen Eigenschaften in Lösung der am Kern einfach und zweifach Kronenether-funktionalisierten PBIs 77a,b und 71a,b untersucht. In Imidstellung waren alle PBIs mit 2-Trimethylammoniumethyl-Resten funktionalisiert, um eine Löslichkeit in polaren Lösungsmitteln zu gewährleisten. Die Buchtpositionen wurden jeweils ein- bzw. zweifach mit den Kronenether-Einheiten 2-Hydroxymethyl-15-Krone-5 und 2-Hydroxymethyl-18-Krone-6 substituiert. Die anschließende Untersuchung der optischen Eigenschaften der PBIs zeigten bei einer Konzentration von 10-5 M in Acetonitril den monomeren Zustand und in Wasser die Ausbildung von H-Aggregaten. Die Fluoreszenzquantenausbeuten erfuhren in Acetonitril mit steigender Kronenether-Ringgröße eine Zunahme von 73% auf 81% für die PBIs 71a,b und eine vernachlässigbare geringe Zunahme von 49% auf 51% für die PBIs 77a,b. Die Abnahme der Quantenausbeute vom zweifach funktionalisierten zum einfach funktionalisierten PBI um ca. 30% ließ sich durch die stärker ausgeprägten strahlungslosen Relaxationsprozesse dieses flexibleren Moleküls im angeregten Zustand erklären.
Im zweiten Unterkapitel (Kapitel III – 2.2.) wurden die Selbstassemblierungseigenschaften der synthetisierten PBIs 71a,b und 77a,b in Gegenwart verschiedener Metallionen (Na+, K+, Rb+, Mg2+, Ca2+ und Ba2+) untersucht. Hier konnte eine Abhängigkeit von der Größe des Kronenether-Rezeptors sowie von der Art der Metallionen gezeigt werden. Die Absorptions- und Fluoreszenz-spektroskopischen Studien der zweifach funktionalisierten PBIs 71a und 71b bei einer PBI-Konzentration von c = 10-5 M zeigten ausschließlich für das 15-Krone-5-Derivat 71a und Ba2+ eine erfolgreiche Ausbildung von PBI-Stapeln mit H-artiger exzitonischer Kopplung. Aufgrund dessen erfuhr das Absorptionsmaximum eine stetige Abnahme einhergehend mit einer hypsochromen Verschiebung und die Fluoreszenz eine vollständige Löschung. Zudem konnte eine 1:1-Stöchiometrie der PBI-Stapeln ermittelt werden. Die Anpassung der spektroskopischen Änderungen an die Hill-Gleichung bestätigte letztendlich die Bildung eines [2+2]-Sandwich- bzw. Dimer-Komplexes in einem positiv kooperativen Bindungsprozess, in dem mittels ITC eine enorme Stabilisierung der Ba2+-Komplexierung aufgrund der π-π-Wechselwirkung zwischen zwei PBI-Molekülen, beobachtet wurde. Die Durchführung der Titrationsexperimente bei einer höheren PBI-Konzentration (c = 10-4 M) zusammen mit DOSY-Experimenten versicherten auch in diesem Fall die Formation diskreter Dimerkomplexe. Das einfach funktionalisierte PBI 77a zeigte in der Anwesenheit von Ba2+ ähnliche optische Änderungen. Die nachfolgenden Untersuchungen bzw. Interpretationen bestätigten die Bildung eines [1+2]-Dimerkomplexes mit H-artiger exzitonischer Kopplung, welches aufgrund der flexibleren Komplexstruktur keine Stabilisierung der Ba2+-Komplexierung erfuhr.
Neben der Metallionen-Komplexierung war PBI 71b auch in der Lage, in einer 1:2-Stöchiometrie aromatische Aminosäuren und Dipeptide zu erkennen (Kapitel III – 2.3.), da hier sowohl die Ammoniumgruppen der Aminosäuren und Dipeptide mit den Kronenethereinheiten als auch die aromatischen Einheiten mit dem PBI-Kern wechselwirken können. Fluoreszenz-Titrationsexperimente zeigten, dass die Aminosäuren L-Tryptophan und L-Tyrosin, welche elektronenreiche aromatische Gruppen aufweisen, und Dipeptide, die diese Aminosäuren enthalten, die Fluoreszenz des PBIs stark löschen. Die Bindungskonstanten der Wirt-Gast-Komplexierung in Acetonitril konnten aufgrund eines statischen Löschungsprozesses aus den Fluoreszenztitrationsdaten bestimmt werden. Hier wurde beobachtet, dass die Bindungsstärke von der Größe und der elektronischen Natur der aromatischen Einheiten sowie von dem Abstand zwischen der Ammoniumgruppe und der aromatischen Einheit in Aminosäuren und Dipeptiden abhängt. Die stärkste Bindung konnte zwischen Ala-Trp und PBI 71b mit einem Wert von 3.1 x 105 M-1 beobachtet werden. NMR-Studien bestätigten ebenfalls die Wirt-Gast-Komplexierung, ließen jedoch offen, ob es zu der Bildung von zwei Diastereomeren aufgrund der eingeschränkten Umwandlung der Atrop-Enantiomere (P und M) des PBI 71b kommt oder zu der Bildung von vier Diastereomeren infolge des Chiralitätszentrums im Kronenether.
Zusammenfassend wurden in dieser Arbeit Naphthalinbisimde und Perylenbisimide hinsichtlich ihrer Eignung als optische Chemosensoren untersucht. Die NBI-Derivate agierten aufgrund ihrer interessanten optischen Eigenschaften als chemische Sensoren selektiv für primären Amindampf und für die DNS/RNS-Wechselwirkung. Im Fall der PBI-Verbindungen wurden hervorragende fluorometrische Chemosensoren ermittelt, die Ba2+-Ionen und elektronenreiche aromatische Aminosäuren und Dipeptide in einer deutlichen Fluoreszenzlöschung detektieren können.
Supramolecular Block Copolymers by Seeded Living Supramolecular Polymerization of Perylene Bisimides
(2019)
The research on supramolecular polymerization has undergone a rapid development in the last two decades, particularly since supramolecular polymers exhibit a broad variety of functionalities and applications in organic electronics, biological science or as functional materials (Chapter 2.1). Although former studies have focused on investigation of the thermodynamics of supramolecular polymerization (Chapter 2.2), the academic interest in the recent years shifted towards gaining insight into kinetically controlled self-assembly and pathway complexity to generate novel out-of-equilibrium architectures with interesting nanostructures and features (Chapter 2.3). Along this path, the concepts of seeded and living supramolecular polymerization were recently developed to enable the formation of supramolecular polymers with controlled length and low polydispersity under precise kinetic control (Chapter 2.4). Besides that, novel strategies were developed to achieve supramolecular copolymerization resulting in complex multicomponent nanostructures with different structural motives. The classification of these supramolecular copolymers on the basis of literature examples and an overview of previously reported principles to create such supramolecular architectures are provided in Chapter 2.5.
The aim of the thesis was the non-covalent synthesis of highly desirable supramolecular block copolymers by the approach of living seeded supramolecular polymerization and to study the impact of the molecular shape of the monomeric building blocks on the supramolecular copolymerization. Based on the structure of the previously investigated PBI organogelator H-PBI a series of novel PBIs, bearing identical hydrogen-bonding amide side-groups in imide-position and various kind or number of substituents in bay-position, was synthesized and analyzed within this thesis. The new PBIs were successfully obtained in three steps starting from the respective bromo-substituted perylene-3,4:9,10-tetracarboxylic acid tetrabutylesters or from the N,N’-dicyclohexyl-1,7-dibromoperylene-3,4:9,10-tetracarboxylic acid bisimide. All target compounds were obtained in the final step by imidization reactions of the respective perylene tetracarboxylic acid bisanhydride precursors with N-(2-aminoethyl)-3,4,5-tris(dodecyloxy)-benzamide and were fully characterized by 1H and 13C NMR spectroscopy as well as high resolution mass spectrometry.
The variation of bay-substituents strongly changes the optical properties of the monomeric PBIs which were investigated by UV/vis and fluorescence spectroscopy. The increase of the number of the methoxy-substituents provokes, for example, a red-shift of the absorption maxima concomitant with a decrease of extinction coefficients and leads to a drastic increase of the fluorescence quantum yields. Furthermore, the molecular geometry of the PBIs is also affected by variations of the bay-substituents. Thus, increasing the steric demand of the bay-substituents leads to an enlargement of the twist angles of the PBI cores as revealed by DFT calculations.
Especially the 1,7-dimethoxy bay-substituted MeO-PBI proved to be very well-suited for the studies envisioned within this thesis. The self-assembly of this PBI derivative was analyzed in detail by UV/vis, fluorescence and FT-IR spectroscopy as well as atomic force microscopy (Chapter 3). These studies revealed that MeO-PBI forms in a solvent mixture of methylcyclohexane and toluene (2:1, v/v) kinetically trapped off-pathway H-aggregated nanoparticles upon fast cooling of a monomeric solution from 90 to 20 °C. However, upon slow cooling of the monomer solution fluorescent J-type nanofibers are formed by π π interactions and intermolecular hydrogen-bonding.
The kinetically metastable off-pathway H-aggregates can be transformed into the thermodynamically more favored J-type aggregates by addition of seeds, which are produced by ultrasonication of the polymeric nanofibers. Interestingly, the living character of this seed-induced supramolecular polymerization process was proven by a newly designed multicycle polymerization experimental protocol. This living polymerization experiment clearly proves, that the polymerization can only occur at the “active” ends of the polymeric seed and that almost no recombination or chain termination processes are present. Hence, the approach of living supramolecular polymerization enables the formation of supramolecular polymers with controlled length and narrow polydispersity.
In Chapter 4 the copolymerization of MeO-PBI with the structurally similar 1,7-dichloro (Cl-PBI) and 1,7-dimethylthio (MeS-PBI) bay-substituted PBIs is studied in detail. Both PBIs form analogous to MeO-PBI kinetically trapped off-pathway aggregates, which can be converted into the thermodynamically stable supramolecular polymers by seed-induced living supramolecular polymerization under precise kinetic control. However, the stability of the kinetically trapped aggregates of Cl-PBI and MeS-PBI is distinctly reduced compared to that of MeO-PBI, because the π-π-interactions of the kinetically metastable aggregates are hampered through the increased twisting of the PBI-cores of the former PBIs. UV/vis studies revealed that the two-component seeded copolymerization of the kinetically trapped state of MeO-PBI with seeds of Cl-PBI leads to the formation of unprecedented supramolecular block copolymers with A-B-A pattern by a living supramolecular polymerization process at the termini of the seeds. Remarkably, the resulting A-B-A block pattern of the obtained copolymers was clearly confirmed by atomic force microscopy studies as the respective blocks formed by the individual monomeric units could be distinguished by the pitches of the helical nanofibers.
Moreover, detailed UV/vis and AFM studies have shown that by inverted two-component seed-induced polymerization, e.g., upon addition of seeds of MeO-PBI to the kinetically trapped aggregates of Cl-PBI, triblock supramolecular copolymers with B-A-B pattern can be generated. The switching of the block pattern could only be achieved because of the perfectly matching conditions for the copolymerization process and the tailored molecular geometry of the individual building blocks of both PBIs. These studies have demonstrated for the first time, that the block pattern of a supramolecular copolymer can be modulated by the experimental protocol through the approach of living supramolecular polymerization. Furthermore, by UV/vis analysis of the living copolymerization of MeO-PBI and MeS-PBI similar results were obtained showing also the formation of both A-B-A and B-A-B type supramolecular block copolymers. Although for these two PBIs the individual blocks could not be identified by AFM because the helical nanofibers of both PBIs exhibit identical helical pitches, these studies revealed for the first time that the approach of seeded living polymerization is not limited to a special pair of monomeric building blocks.
In the last part of the thesis (Chapter 5) a systematic study on the two-component living copolymerization of PBIs with various sterical demanding bay-substituents is provided. Thus, a series of PBIs containing identical hydrogen-bonding amide groups in imide position but variable number (1-MeO-PBI, MeO-PBI, 1,6,7-MeO-PBI, 1,6,7,12-MeO-PBI) or size (EtO-PBI, iPrO-PBI) of alkoxy bay-substituents was investigated. The molecular geometry of the monomeric building blocks has a strong impact on the thermodynamically and even more pronounced on the kinetically controlled aggregation in solvent mixtures of MCH and Tol. While the mono- and dialkoxy-substituted PBIs form kinetically metastable species, the self-assembly of the tri- and tetramethoxy-substituted PBIs (1,6,7-MeO-PBI and 1,6,7,12-MeO-PBI) is completely thermodynamically controlled. The two 1,7-alkoxy substituted PBIs (EtO-PBI, iPrO-PBI) form very similar to MeO-PBI kinetically off-pathway H-aggregates and thermodynamically more favored J-type aggregates. However, the stability of the kinetically metastable state is drastically lower and the conversion into the thermodynamically favored state much faster than for MeO-PBI. In contrast, the monomethoxy-substituted PBI derivative (1-MeO-PBI) forms a kinetically trapped species by intramolecular hydrogen-bonding of the monomers, which can be transformed into the thermodynamically favored nanofibers by seeded polymerization.
Importantly, the two-component seeded copolymerization of the kinetically trapped MeO PBI with seeds of other PBIs of the present series was studied by UV/vis and AFM revealing that the formation of supramolecular block copolymers is only possible for appropriate combinations of PBI building blocks. Thus, the seeded polymerization of the trapped state of the moderately core-twisted MeO-PBI with the, according to DFT-calculations, structurally similar PBIs (EtO-PBI and iPrO-PBI) leads to the formation of A-B-A block copolymers, like in the seeded copolymerization of MeO-PBItrapped with seeds of Cl-PBI and MeS-PBI already described in Chapter 4. However, by addition of seeds of the almost planar PBIs (H-PBI and 1-MeO-PBI) or seeds of the strongly core-twisted PBIs (1,6,7-MeO-PBI and 1,6,7,12-MeO-PBI) to the kinetically trapped state of MeO-PBI no block copolymers can be obtained. The mismatching geometry of these molecular building blocks strongly hampers both the intermolecular hydrogen-bonding and the π-π-interactions between the two different PBIs and consequently prevents the copolymerization process.
Furthermore, the studies of the two-component seeded copolymerization of the kinetically trapped species of 1-MeO-PBI with seeds of the other PBIs also corroborated that a precise shape complementarity is crucial to generate supramolecular block copolymers. Thus, by addition of seeds of H-PBI to the kinetically trapped monomers of 1-MeO-PBI supramolecular block copolymers were generated. Both PBIs exhibit an almost planar PBI core according to DFT-calculations leading to strong non-covalent interactions between these PBIs. This perfectly matching geometry of both PBIs also enables the inverted seeded copolymerization of the kinetically trapped monomers of H-PBI with 1-MeO-PBIseed concomitant with a switching of the block pattern of the supramolecular copolymer from A-B-A to B-A-B type. In contrast, the seeding with the moderately twisted (MeO-PBI, EtO-PBI and iPrO-PBI) and the strongly twisted PBIs (1,6,7-MeO-PBI and 1,6,7,12 MeO-PBI) has no effect on the kinetically trapped state of 1-MeO-PBI, because the copolymerization of these PBIs is prevented by the mismatching geometry of the molecular building blocks.
In conclusion, the supramolecular polymerization and two-component seeded copolymerization of a series of PBI monomers was investigated within this thesis. The studies revealed that the thermodynamically and kinetically controlled self-assembly can be strongly modified by subtle changes of the monomeric building blocks. Moreover, the results have shown that living supramolecular polymerization is an exceedingly powerful method to generate unprecedented supramolecular polymeric nanostructures with controlled block pattern and length distribution. The formation of supramolecular block copolymers can only be achieved under precise kinetic control of the polymerization process and is strongly governed by the shape complementarity already imparted in the individual components. Thus, these insightful studies might enable a more rational design of monomeric building blocks for the non-covalent synthesis of highly complex supramolecular architectures with interesting properties for possible future applications, e.g., as novel functional materials.
A series of seven unusual dimeric naphthylisoquinoline alkaloids was isolated from the leaves of the tropical liana Ancistrocladus ealaensis J. Léonard, named cyclombandakamine A (1), 1-epi-cyclombandakamine A (2), and cyclombandakamines A3–7 (3–7). These alkaloids have a chemically thrilling structural array consisting of a twisted dihydrofuran-cyclohexenone-isochromene system. The 1′″-epimer of 4, cyclombandakamine A1 (8), had previously been discovered in an unidentified Ancistrocladus species related to A. ealaensis. Both lianas produce the potential parent precursor, mbandakamine A (9), but only A. ealaensis synthesizes the corresponding cyclized form, along with a broad series of slightly modified analogs. The challenging isolation required, besides multi-dimensional chromatography, the use of a pentafluorophenyl stationary phase. Featuring up to six stereocenters and two types of chiral axes, their structures were elucidated by means of 1D and 2D NMR, HRESIMS, in combination with oxidative chemical degradation experiments as well as chiroptical (electronic circular dichroism spectroscopy) and quantum chemical calculations. Compared to the ‘open-chain’ parent compound 9, these dimers displayed rather moderate antiplasmodial activities.
In this work, two new quadrupolar A-π-D-π-A chromophores have been prepared featuring a strongly electron- donating diborene core and strongly electron-accepting dimesitylboryl F(BMes2) and bis(2,4,6-tris(trifluoromethyl)phenyl)boryl (BMes2) end groups. Analysis of the compounds by NMR spectroscopy, X-ray crystallography, cyclic voltammetry and UV-vis-NIR absorption and emission spectroscopy indicated that the compounds possess extended conjugated π-systems spanning their B4C8 cores. The combination of exceptionally potent π-donor (diborene) and π- acceptor (diarylboryl) groups, both based on trigonal boron, leads to very small HOMO-LUMO gaps, resulting in strong absorption in the near-IR region with maxima in THF at 840 and 1092 nm, respectively, and very high extinction coefficients of ca. 120,000 M-1cm-1. Both molecules also display weak near-IR fluorescence with small Stokes shifts.
Structure-fluorescence activation relationships of a large Stokes shift fluorogenic RNA aptamer
(2019)
The Chili RNA aptamer is a 52 nt long fluorogen-activating RNA aptamer (FLAP) that confers fluorescence to structurally diverse derivatives of fluorescent protein chromophores. A key feature of Chili is the formation of highly stable complexes with different ligands, which exhibit bright, highly Stokes-shifted fluorescence emission. In this work, we have analyzed the interactions between the Chili RNA and a family of conditionally fluorescent ligands using a variety of spectroscopic, calorimetric and biochemical techniques to reveal key structure - fluorescence activation relationships (SFARs). The ligands under investigation form two categories with emission maxima of ~540 nm or ~590 nm, respectively, and bind with affinities in the nanomolar to low-micromolar range. Isothermal titration calorimetry was used to elucidate the enthalpic and entropic contributions to binding affinity for a cationic ligand that is unique to the Chili aptamer. In addition to fluorescence activation, ligand binding was also observed by NMR spectroscopy, revealing characteristic signals for the formation of a G-quadruplex only upon ligand binding. These data shed light on the molecular features required and responsible for the large Stokes shift and the strong fluorescence enhancement of red and green emitting RNA-chromophore complexes.
The indepth metabolic profiling of the crude extracts of two African Ancistrocladus species viz. A. likoko from Central Africa and A. abbreviatus from West Africa, resulted in a total of 87 alkaloids among them 54 new ones. All of the compounds were intensely elucidated by 1D and 2D NMR, HRESIMS, as well as chemical and chiroptical techniques.
Among the newly discovered compounds are quinoid naphthylisoquinolines with an ortho-diketone in the naphthalene portion, nor-naphthylisoquinoline alkaloid lacking the always present methyl group at C-1, seco-(ring cleaved) naphthylisoquinolines, and a newly discovered class of natural products called the naphthylisoindolinones.
Some of the compounds displayed strong antitumoral activities against human pancreatic cancer cells and leukemia cells in-vitro.
Nanodiamant bietet in der Medizin und in der Biologie zahlreiche Anwendungsmöglichkeiten aufgrund der guten Biokompatibilität und geringen Toxizität. Durch die umfangreichen Funktionalisierungsmöglichkeiten der Oberfläche der nanometergroßen Partikel können viele unterschiedliche Wirkstoffe, Rezeptormoleküle oder Peptidsequenzen angebunden werden ,die zusammen mit Nanodiamant ein anderes, durchaus besseres Wirkprofil aufweisen als der Wirkstoff allein. Ziel dieser Arbeit war die Synthese eines pH-labilen Linkersystems, dass hydroxylhaltige Wirkstoffe kovalent bindet und zusammen mit Nanodiamant in die Zelle, in der ein saurer pH-Wert herrscht, eingeschleust werden. Über die Änderung des pH-Wertes in der Zelle soll der Wirkstoff freigesetzt werden und seine Wirkung entfalten können.
Weiterhin wurde ein pH-labiles Linkersystem auf der Basis eines Hydrazons hergestellt. Über das synthetisierte Hydrazinderivat können Wirkstoffe, die über eine Aldehyd- oder Ketonfunktion verfügen angebunden werden und pH-labil in der Zelle freigesetzt werden. Zusätzlich trägt der Nanodiamant ein kovalent angebundenes Targeting-Molekül, welches eine verbesserte Adressierung der Wirkorte gewähr¬leisten soll. Die Freisetzung wurde mittels UV-Vis-Spektroskopie detektiert und ausgewertet.
Neben der spezifischen Funktionalisierung von Nanodiamant besitzt auch die Interaktion der Nanodiamantpartikel mit biologischen Medien eine besondere Bedeutung für zukünftige biomedizinische Anwendungen. Wenn die Partikeloberfläche durch Proteinadsorption gegenüber dem Wirkort abgeschirmt wird, so kann der angebundene Wirkstoff gegebenenfalls nicht freigesetzt werden und somit nicht seine Wirkung entfalten und bleibt letztlich ungenutzt. So war es von besonderem Interesse die Wechselwirkungen von Nanodiamant in Humanserum und auch weiteren physiologischen Medien zu untersuchen. Dabei wurden sowohl freie Nanodiamantpartikel als auch solche, die auf klinisch bereits eingesetzten Gerüstmaterialien im Bereich der Therapie großer Knochendefekte adsorbiert waren, untersucht. Auch wurden die Wechselwirkungen von Nanodiamant mit der physiologischen Umgebung untersucht, die zur Agglomeration der Nanopartikel führen können. Es wurde ein unter¬schiedliches Agglomerationsverhalten der Nanodiamanten in wässriger Umgebung verglichen mit Nanodiamanten in physiologischen Medien sowie deren Stabilität im Serum beobachtet.
Durch die in dieser Arbeit vorgestellten Untersuchungen konnten wichtige Erkenntnisse zur Wechselwirkung verschieden präparierter und funktionalisierter Nanodiamanten mit physiologisch relevanten Umgebungen sowie zu stimuli-responsiven Wirkstofffreisetzung aus Nanodiamant-Konjugaten gewonnen werden. Zudem wurde mit der Untersuchung der angelagerten Proteine um Nanodiamant ein erster Schritt in Richtung eines umfassenden Verständnisses der Wechselwirkung dieses Materials mit biologischen Umgebungen unternommen. Auch wenn diese Wechselwirkungen sehr komplex sind, so sind erste Aussagen bezüglich der Art der angelagerten Proteine möglich. Erste Versuche der Stabilisierung von Nanodiamant in physiologischen Medien wurden ebenfalls erfolgreich durchgeführt und zeigen eine effiziente und einfache Möglichkeit, Nanodiamant in biologischen Medien vor der Agglomeration zu bewahren. Die im Rahmen dieser Arbeit gewonnen Erkenntnisse bezüglich mehrfacher Funktionalisierungsmöglichkeiten von Nanodiamant sowie dessen Stabilisierung in physiologischen Medien zeigen die breite Anwendungsmöglichkeit und das enorme Potential von Nanodiamant im Bereich medizinischer und biologischer Anwendungen auf.
Protein-like enwrapped perylene bisimide chromophore as bright microcrystalline emitter material
(2019)
Strongly emissive solid‐state materials are mandatory components for many emerging optoelectronic technologies, but fluorescence is often quenched in the solid state owing to strong intermolecular interactions. The design of new organic pigments, which retain their optical properties despite their high tendency to crystallize, could overcome such limitations. Herein, we show a new material with monomer‐like absorption and emission profiles as well as fluorescence quantum yields over 90 % in its crystalline solid state. The material was synthesized by attaching two bulky tris(4‐tert‐butylphenyl)phenoxy substituents at the perylene bisimide bay positions. These substituents direct a packing arrangement with full enwrapping of the chromophore and unidirectional chromophore alignment within the crystal lattice to afford optical properties that resemble those of their natural pigment counterparts, in which chromophores are rigidly embedded in protein environments.