Refine
Has Fulltext
- yes (137)
Is part of the Bibliography
- yes (137)
Year of publication
Document Type
- Doctoral Thesis (137) (remove)
Keywords
- Spektroskopie (16)
- Exziton (14)
- Ultrakurzzeitspektroskopie (13)
- Theoretische Chemie (12)
- Femtosekundenspektroskopie (11)
- Kohlenstoff-Nanoröhre (11)
- Raman-Spektroskopie (10)
- Angeregter Zustand (9)
- Molekulardynamik (8)
- Photodissoziation (8)
Institute
- Institut für Physikalische und Theoretische Chemie (137) (remove)
Sonstige beteiligte Institutionen
ResearcherID
- B-1911-2015 (1)
- M-1240-2017 (1)
- N-3741-2015 (1)
Time-resolved optical spectroscopy has become an important tool to investigate the dynamics of quantum mechanical processes in matter. In typical applications, a first “pump” pulse excites the system under investigation from the thermal equilibrium to an excited state, and a second variable time-delayed “probe” pulse then maps the dynamics of the excited system. Although advanced nonlinear techniques have been developed to investigate, e.g., coherent quantum effects, all of these techniques are limited in their spatial resolution. The laser focus diameter has a lower bound given by Abbe’s diffraction limit, which is roughly half the optical excitation wavelength—corresponding to about 400nm in the presented experiments. In the time-resolved experiments that have been suggested so far, averaging over the sample volume within this focus cannot be avoided. In this thesis, two approaches were developed to overcome the diffraction limit in optical spectroscopy and to enable the investigation of coherent processes on the nanoscale. In the first approach, analytic solutions were found to calculate optimal polarizationshaped laser pulses that provide optical near-field pump–probe pulse sequences in the vicinity of a nanostructure. These near-field pulse sequences were designed to allow excitation of a quantum system at one specific position at a certain time and probing at a different position at a later time. In the second approach, the concept of coherent two-dimensional (2D) spectroscopy, which has had great impact on the investigation of coherent quantum effects in recent years, was combined with photoemission electron microscopy, which yields a spatial resolution well below the optical diffraction limit. Using the analytic solutions, optical near fields were investigated in terms of spectroscopic applications. Near fields that are excited with polarization-shaped femtosecond laser pulses in the vicinity of appropriate nanostructures feature two properties that are especially interesting in the view of spectroscopic applications: On the one hand, control of the spatial distribution of the optical fields is achieved on the order of nanometers. On the other hand, the temporal evolution of these fields can be adjusted on the order of femtoseconds. In this thesis, solutions were found to calculate the optimal polarizationshaped laser pulses that control the near field in a general manner. The main idea to achieve this deterministic control was to disentangle the spatial and temporal near-field control. First, the spatial distribution of the optical near field was controlled by assigning the correct state of polarization for each frequency within the polarization-shaped laser pulse independently. The remaining total phase—not employed for spatial control—was then used for temporal near-field compression, which, in experimental applications, would lead to an enhancement of the nonlinear signal at the respective location. In contrast to the use of optical near fields, where pump–probe sequences themselves are localized below the diffraction limit and the detection does not have to provide the spatial resolution, a different approach was suggested in this thesis to gain spectroscopic information on the nanoscale. The new method was termed “Coherent two-dimensional (2D) nanoscopy” and transfers the concept of “conventional” coherent 2D spectroscopy to photoemission electron microscopy. The pulse sequences used for the investigation of quantum systems in this method are still limited by diffraction. However, the new key concept is to detect locally generated photoelectrons instead of optical signals. This yields a spatial resolution that is well below the optical diffraction limit. In “conventional” 2D spectroscopy a triple-pulse sequence initiates a four wave mixing process that creates a coherence. In a quantum mechanical process, this coherence is converted into a population by emission of an electric field, which is measured in the experiment. Contrarily, in the developed 2D nanoscopy, four-wave mixing is initiated by a quadruple-pulse sequence, which leaves the quantum system in an electronic population. This electronic population carries coherent information about the investigated quantum system and can be mapped with a spatial resolution down to a few nanometers given by the spatial resolution of the photoemission electron microscope. Hence, 2D nanoscopy can be considered a generalization of time-resolved photoemission experiments. In the future, it may be of similar beneficial value for the field of photoemission research as “conventional” 2D spectroscopy has proven to be for optical spectroscopy and nuclear magnetic resonance experiments. In a first experimental implementation of coherent 2D nanoscopy coherent processes on a corrugated silver surface were measured and unexpected long coherence lifetimes could be determined.
Analyse der chemischen Reaktionen ungesättigter Verbindungen mit FEL- und Synchrotronstrahlung
(2013)
Brilliante Strahlungsquellen werden heute vielfach in der Forschung eingesetzt um Kristallstrukturen, Oberflächeneigenschaften oder Reaktionen zu untersuchen. Als Strahlungsquellen werden dafür bevorzugt Freie Elektronenlaser (FEL) oder Synchrotrons eingesetzt, da sie über weite Bereiche durchstimmbar sind und einen hohen Photonenfluss bereitstellen. Im Rahmen der vorliegenden Dissertation werden beide Lichtquellen verwendet um einerseits Isomere von Kohlenwasserstoffradikalen zu identifizieren und andererseits das Verhalten von Borylen und ungesättigten Verbindungen bei Photoionisation zu dokumentieren. Als erstes Experiment am FEL wurde ein IR-Spektrum von gasförmigen Allylradikalen aufgenommen. Das Allyl war ein Testlauf, da es als Kohlenwasserstoffradikal mit einer kleinen Dipolmomentänderung ein gutes Beispiel für ähnliche Verbindungen ist. Trotz der kleinen Änderung des Dipolmoments und der geringen Teilchendichte der Radikale in der Gasphase konnte ein gutes IR-Spektrum mit der IR-UV-Doppelresonanzmethode aufgenommen werden und die beobachteten Banden mit der Literatur zugeordnet werden. Das 3-Trifluoromethyl-3-Phenyl-carben (TFPC) wurde pyrolytisch aus 3-Trifluoromethyl-3-Phenyl-diazirin erzeugt. Dabei kam es beim Großteil der Carbene zu einer Umlagerung zu Trifluorstyrol. Neben dem Hauptprodukt Trifluorstyrol wurde das Triplett TFPC als Nebenprodukt identifiziert. Zusätzlich wurden die Isomerisierungsbarrieren für den Triplett- und Singulett-Übergangszustand berechnet. Die Radikale 1-Phenylpropargyl und 3-Phenylpropargyl sind anhand ihrer IR-Spektren unterscheidbar und lagern sich nicht ineinander oder in Indenyl um. Ausgehend von beiden Radikalen bilden sich die identischen Dimerisierungsprodukte im Massenkanal m/z = 230 (p-Terphenyl) und 228 (1-Phenylethinylnaphthalin (1PEN)). Außergewöhnlich war die Exklusivität dieser Produkte. Somit müssen deren Reaktionsmechanismen kinetisch viel schneller sein. Die Massen m/z = 230 und 228 waren bereits aus einer massenspektrometrischen Studie ausgehend von Benzol und Ethin bekannt, in der ihre Struktur jedoch nicht geklärt wurde. Somit müssen die gefundenen Dimerisierungsprodukte p-Terphenyl und 1PEN wichtige Intermediate bei der Entstehung von polyzyklischen aromatischen Kohlenwasserstoffen (PAK) und Ruß sein. Von gasförmigen NTCDA wurde mittels der TPEPICO-Methode am Synchrotron Schwellenphotoelektronenspektren aufgenommen. Dabei konnte die adiabatische Ionisierungsenergie (IE(ad)) zu 9.66 eV bestimmt werden. Weiterhin wurden noch fünf angeregte Zustände beobachtet, die mittels quantenmechanischer Berechnungen zugeordnet wurden. Es wurde die Photoionisation des Cycloheptatrienradikals (Tropyl) untersucht. Dabei wurde die erste Bande bei 6.23 eV der IE(ad) zugeordnet. Mit einer Franck-Condon Simulation wurden die beiden Schwingungsprogressionen einer CC-Streckschwingung (ν16+) und einer Kombination aus einer Ringatmung (ν2+) und ν16+ zugeordnet. Der erste Triplett- und Singulettzustand des angeregten Tropylkations konnte in Übereinstimmung mit der Literatur zugeordnet werden. Eine Schulter bei 9.85 eV und die intensivste Bande bei 11.6 eV konnten nicht eindeutig interpretiert werden. Neben dem Tropyl erscheint bei etwa 10.55 eV sein dissoziatives Zersetzungsprodukt, das Cyclopentadienylkation. Die IE(ad) des Borylenkomplex [(CO)5CrBN(SiMe3)2] wurde zu 7.1 eV bestimmt. Mit steigender Photonenenergie wurden alle CO-Liganden sequenziell abgespalten, während der Borligand auch bei 15 eV noch nicht dissoziierte. Von den fünf abgespaltenen CO-Liganden konnte die Auftrittsenergie bei 0 K unter Berücksichtigung der kinetischen Verschiebung gefittet werden. Durch einen einfachen thermodynamischen Zyklus wurden aus den Auftrittsenergien der Kationen die Bindungsenergien berechnet. Dabei zeigte sich, dass die zweite Bindungsenergie im Kation erheblich stärker ist als die erste. Dies deutet einen starken trans-Effekt des Borliganden an. In der Dissertation wurden die adiabatische Ionisierungsenergie der Moleküle sowie die Auftrittsenergien der Fragmente und die Bindungsenergien bestimmt. Zudem konnten Isomere anhand ihrer IR-Spektren unterschieden und ihre Dimerisierungsprodukte identifiziert werden. Damit wurden mit p-Terphenyl und 1PEN zwei weitere bedeutende Intermediate im Bildungsmechanismus von Ruß strukturell aufgeklärt. Die Beteiligung dieser Dimerisierungsprodukte am Bildungsmechanismus der PAK initiiert zukünftige Fragen. Was geschieht z.B. mit p-Terphenyl und 1PEN nach ihrer Bildung? Reagieren sie chemisch zu größeren Molekülen oder setzt bei ihnen bereits die Akkumulation zu Partikeln ein? Zusätzlich ist die Frage, ob Phenylpropargyl aus der Reaktion von Phenyl- und Propargylradikalen entsteht noch offen. Die erzielten Resultate haben einen wichtigen Schritt im Bildungsmechanismus der PAK identifiziert und damit die Grundlage für zukünftige Experimente gelegt.
Gegenstand dieser Arbeit ist die Untersuchung von gespeicherten Nanopartikeln mit weicher Röntgenstrahlung. Dafür wurde eine neue Apparatur aufgebaut. In dieser befindet sich ein dreidimensionaler elektrodynamischer Quadrupolspeicher, mit dem die positiv geladenen Nanopartikel berührungsfrei und ortsfest gespeichert werden. Mit Hilfe eines Streulichtnachweises werden die Eigenbewegungen der Partikel gemessen und daraus das Ladungs- zu Masseverhältnis ermittelt. Durch gezielte Umladung können die absolute Ladung und die Masse der Partikel mit hoher Genauigkeit bestimmt werden. Die gespeicherten Partikel wurden mit Synchrotronstrahlung am Elektronenspeicherring BESSY II untersucht. Bei niedrig geladenen Partikeln wurden Aufladungsexperimente mit variabler Photonenenergie durchgeführt. Dabei kann die Emission von einzelnen Elektronen beobachtet werden. Die totale Sekundärelektronenausbeute wurde für verschiedene Photonenenergien ermittelt. Sie gleicht den Werten, die durch Messungen mit Elektronenbeschuss bekannt sind. Die Partikel wurden weiterhin bis zum maximal erreichbaren Ladungszustand aufgeladen. Dieser Gleichgewichtszustand liegt unterhalb der theoretischen Erwartungen. Bei den hochgeladenen Partikeln wurden nach Abschalten der Synchrotronstrahlung Entladevorgänge beobachtet, die für das verminderte Ladungsgleichgewicht verantwortlich sind. Die Entladung wird als Ionen-Feldemission interpretiert, möglicherweise hervorgerufen durch den elektrischen Durchschlag im Teilchenmaterial. Das Aufladungsverhalten der Partikel bei verschiedenen Ladungszuständen wurde mit Hilfe von Messungen an der O 1s-Kante untersucht. Bei niedrigen Ladungszuständen liefert der Ladestrom die bekannten Röntgenabsorbtionsstrukturen von Siliziumdioxid. Stark geladene Partikel werden dagegen vor allem im Bereich der resonanten O 1s-Anregung durch schnelle Augerelektronen aufgeladen, während Photoelektronen aus dem O 1s-Kontinuum nicht mehr zur Aufladung beitragen. Deren kinetische Energie ist zu gering, um dem Coulombfeld des Partikels zu entkommen.
The enhancement of electronic and optical properties of semiconductor nanostructures is known as a direct consequence of the spatial confinement of carriers. However, the physics of quantum confinement is still not entirely understood. This work focuses on a qualitative study of quasi-zero dimensional II-VI semiconductor nanostructures (quantum dots QDs). In particular, commercially available as-received and heat treated CdSxSe1-x QDs embedded in a dielectric matrix were investigated by means of linear and nonlinear spectroscopy techniques. Low wavenumber Raman in off-resonance scattering regime was applied in order to obtain key-properties of the nanocrystals, such as the QD's size and the distribution of the QD's size inside the inhomogeneous broadening. Moreover, by careful selection of the polarization geometries, different acoustic vibrational modes could be evidenced. In comparison to the bulk, 3D confinement of carriers leads to modifications in the energy distribution in a QD and as a consequence, the intensity of the acoustical phonons is enhanced. However, only 2 acoustic vibrational modes (labelled l=0 and l=2) are Raman-active, which were selectively excited using linear polarized laser light in parallel- and cross-polarized excitation geometries. The QD's size was determined using the dependence of the frequency of the acoustic vibrational mode on the diameter of the vibrating particle, whereas the QD's size distribution was estimated from the normalized full width at the half of the maximum (FWHM) of the symmetric acoustic vibrational mode. In order to study relaxation mechanisms, which in quantum confined systems occur on a ps time scale, ultrafast spectroscopy techniques using laser pulses in the fs range must be employed. To this purpose, fs-FWM and fs-PPT measurements were performed on CdS0.6Se0.4 QDs of 9.1 nm in diameter, embedded in a glass matrix. The laser pulses employed in these experiments were circularly polarized, careful selection of the polarization geometries making different nonlinear processes available to study. It was shown that the relaxation of polarization selection rules depend strongly on the symmetry of the nanocrystals under discussion. The investigated nanocrystals belong to the symmetry group C2v or lower and their hexagonal crystal shape could be evidenced. The relaxation of selection rules was explained in the framework of the 4-level system, including a ground state, two exciton states and a biexcitons state. The appearance of FWM and PPT signals in forbidden polarization geometries was shown to be due to exciton state splitting due to lowering of the QD’s symmetry and due to the strong Coulomb interaction between carriers belonging to the same nanocrystal. Moreover, the significant difference in the origin of the gratings created by two pulses having the same and opposite polarizations, respectively. The intensity of the FWM signals should be the square of the intensity of the PPT signals and therefore the PPT measurements were employed as a check method for the results yielded by the FWM technique. The efficiency of circularly polarized femtosecond FWM spectroscopy techniques was proved once more in the investigation of heat treated CdSe QDs embedded in a dielectric matrix. The role of non-phonon energy relaxation mechanisms in the exciton ground and excited state of the QDs ensemble was extensively studied. Moreover, the dependence of the crystal shape asymmetry on the particle size and on the growth conditions could be estimated. It was shown, that the most efficient procedure to grow high quality nanocrystals is a longer heat treating at lower temperatures. In this case, the particles have more time to "nucleate" and to adopt a more "symmetric" shape. Further, the relaxation of excitons was extensively investigated. It was shown, that the electron intraband dynamics depend strongly on the Coulomb interaction between electrons and holes. Even at low excitation density, the Auger processes cannot be ignored. Auger autoionization of excitons followed by capture of carriers in surface states and deep traps in the dielectric matrix slow down the exciton relaxation process leading to an exciton lifetime ranging on a ps time scale. The relaxation of excitons from higher lying energy levels occurs also on two paths. At the beginning of the relaxation process (t31 < 400 fs), Auger-like thermalization of carriers is responsible for relaxation of the electron from 1pe into its 1se state, while the hole relaxes rapidly through its dense spectrum of states in the valence band. This process is immediately followed by capturing of carriers in deep traps, situated at the semiconductor-dielectric heterointerface. The traps are a consequence of the QD's asymmetry: the more and the deeper the traps, the higher the asymmetry of the nanocrystals (the band offset  is larger). This work presents a complete characterization of CdSSe QDs embedded in a glass matrix. The most important properties of the nanocrystals like QD's size and size distribution inside the inhomogeneous broadening were determined by means of low wavenumber Raman spectroscopy. In order to draw a full picture of these nanoparticles further complementary nonlinear spectroscopy techniques were used. Invaluable conclusions were available as a result of TI-FWM techniques applied in the framework of transient grating on 3D confined nanocrystals embedded in a glass matrix. The polarized the TI-FWM measurements were successfully performed on different QDs ensembles in order to determine symmetry properties and to describe the ultrafast relaxation mechanisms. This work brings additional contribution concerning the preparation of high quality QDs by presenting the effect of different growth conditions on the QDs symmetry, thus indicating a way for efficient manufacturing of nanocrystals.
Die vorliegende Dissertation beschäftigt sich mit nichtlinearen Reaktions-Transport-Systemen, die in zweidimensionalen Medien chemische Wellen und propagierende Fronten ausbilden können. Grundlage dieser Art von räumlichen Mustern sind sogenannte erregbare Systeme. Ein Themengebiet der Arbeit umfasst die Untersuchung von Spiralwellen in der Belousov-Zhabotinsky-Reaktion (BZ-Reaktion). Ein weiterer Teilabschnitt behandelt die Wechselwirkung zwischen Polymersystemen und nichtlinearen chemischen Reaktionen. In den untersuchten, räumlich ausgedehnten Systemen spielt die Kopplung nichtlinearer chemischer Reaktionen an Transportprozesse eine wichtige Rolle. Die generischen Typen von chemischen Mustern sind Pulswellen in einer Raumdimension, kreisförmige Wellen und Spiralen in einem zweidimensionalen System und kugelschalen- bzw. schraubenförmige Wellen in drei Raumdimensionen. Auf theoretischer Basis werden Effekte von Spiralwellen bei Änderung der Erregbarkeit des Reaktionsmediums dargestellt.In der vorliegenden Arbeit ist es erstmals gelungen, eine Methode zu entwickeln, die es erlaubt die Erregbarkeit in der BZ-Reaktion sowie in einer Vielzahl weiterer nichtlinearer Reaktionen zu beeinflussen. Ein weiteres Themengebiet dieser Dissertation ist die Untersuchung von pH-Systeme in Hydrogelen. Dies sind hydrophile Gele, die ihr Volumen in wässrigen Lösungen verändern können. In der vorliegenden Arbeit wurden Gele auf der Basis von Acrylamid und Methacrylat als Copolymer verwendet und an die oben beschriebenen pH-Oszillatoren angekoppelt. Durch Polymerisation von Acrylamid zusammen mit Natriummethacrylat konnte ein mit einem pH-Oszillator beladenes Gel hergestellt werden, das nach Start der Reaktion durch eine kleine Menge Säure mit einer deutlichen Volumenkontraktion reagiert. Diese Kontraktion des Gels konnte ausgenutzt werden, um die chemische Energie eines pH-Reaktionssystems in eine mechanische Kraftwirkung umzuwandeln.
The goal of this thesis was the development and application of higher-order spectroscopic techniques. In contrast to ordinary pump–probe (PP) and two-dimensional (2D) spectroscopy, higher-order coherently detected spectroscopic methods measure a polarization that has an order of nonlinearity higher than three. The key idea of the techniques in this thesis is to isolate the higher-order signals from the lower-order signals either by their excitation frequency or by their excitation intensity dependence. Due to the increased number of interactions in higher-order spectroscopy, highly excited states can be probed. For excitonic systems such as aggregates and polymers, the fifth-order signal allows one to directly measure exciton–exciton annihilation (EEA). In polymers and aggregates, the exciton transport is not connected to a change of the absorption and can therefore not be investigated with conventional third-order techniques. In contrast, EEA can be used as a probe to study exciton diffusion in these isonergetic systems. As a part of this thesis, anisotropy in fifth-order 2D spectroscopy was investigated and was used to study geometric properties in polymers.
In 2D spectroscopy, the multi-quantum signals are separated from each other by their spectral position along the excitation axis. This concept can be extended systematically to higher signals. Another approach to isolate multi-quantum signals in PP spectroscopy utilizes the excitation intensity. The PP signal is measured at specific excitation intensities and linear combinations of these measurements result in different signal contributions. However, these signals do not correspond to clean nonlinear signals because the higher-order signals contaminate the lower-order multi-quantum signals. In this thesis, a correction protocol was derived that uses the isolated multiquantum signals, both from 2D spectroscopy and from PP spectroscopy, to remove the contamination of higher-order signals resulting in clean nonlinear signals. Using the correction on the third-order signal allows one to obtain annihilation-free signals at high excitation intensities, i.e., with high signal-to-noise ratio. Isolation and correction in PP and 2D spectroscopy were directly compared by measuring the clean third-order signals of squaraine oligomers at high excitation intensities. Furthermore, higher-order PP spectroscopy was used to isolate up to the 13th nonlinear order of squaraine polymers.
The demonstrated spectroscopic techniques represent general procedures to isolate clean signals in terms of perturbation theory. The technique of higher-order PP spectroscopy needs only small modifications of ordinary PP setups which opens the field of higher-order spectroscopy to the broad scientific community. The technique to obtain clean nonlinear signals allows one to systematically increase the number of interacting (quasi)particles in a system and to characterize their interaction energies and dynamics.
Coherent Multidimensional Spectroscopy in Molecular Beams and Liquids Using Incoherent Observables
(2018)
The aim of the present work was to implement an experimental approach that enables coherent two-dimensional (2D) electronic spectroscopy of samples in various states of matter. For samples in the liquid phase, a setup was realized that utilizes the sample fluorescence for the acquisition of 2D spectra. Whereas the liquid-phase approach has been established before, coherent 2D spectroscopy on gaseous samples in a molecular beam as developed in this work is in fact a new method. It employs for the first time cations in a time-of-flight mass spectrometer for signal detection and was used to obtain the first ion-selective 2D spectra of a molecular-beam sample. Additionally, a new acquisition concept was developed in this thesis that significantly decreases measurement times in 2D spectroscopy using optimized sparse sampling and a compressed-sensing reconstruction algorithm.
Characteristic for the variant of 2D spectroscopy presented in this work is the usage of a phase-coherent sequence of four laser pulses in a fully collinear geometry for sample excitation. The pulse sequence was generated by a custom-designed pulse shaper that is capable of rapid scanning by changing the pulse parameters such as time delays and phases with the repetition rate of the laser. The sample's response was detected by monitoring incoherent observables that arise from the final-state population, for instance fluorescence or cations. Phase cycling, i.e., signal acquisition with different combinations of the relative phases of the excitation pulses, was applied to extract nonlinear signal contributions from the full signal during data analysis.
Liquid-phase 2D fluorescence spectroscopy was established with the laser dye cresyl violet as a sample molecule, confirming coherent oscillations previously observed in literature that are originating from vibronic coherences in specific regions of the 2D spectrum.
The data set of this experiment was used subsequently to introduce optimized sparse sampling in 2D spectroscopy. An optimization algorithm was implemented in order to find the best sampling pattern while taking only one quarter of the regular time-domain sampling points, thereby reducing the acquisition time by a factor of four. Signal recovery was based on a new and compact representation of 2D spectra using the von Neumann basis, which required about six times less coefficients than the Fourier basis to retain the relevant information. Successful reconstruction was shown by recovering the coherent oscillations in cresyl violet from a reduced data set.
Finally, molecular-beam coherent 2D spectroscopy was introduced with an investigation of ionization pathways in highly-excited nitrogen dioxide, revealing transitions to discrete auto-ionizing states as the dominant contribution to the ion signal. Furthermore, the advantage of the time-of-flight approach to obtain reactant and product 2D spectra simultaneously enabled the observation of distinct differences in the multiphoton-ionization response functions of the nitrogen dioxide cation and the nitrogen oxide ionic fragment.
The developed experimental techniques of this work will facilitate fast acquisition of 2D spectra for samples in various states of matter and permit reliable direct comparison of results. Therefore, they pave the way to study the properties of quantum coherences during photophysical processes or photochemical reactions in different environments.
This thesis describes novel concepts for the measurement of the static and dynamic properties of the electronic structure of molecules and nanocrystals in the liquid phase by means of coherent fluorescence-detected spectroscopy in two and three frequency dimensions. These concepts are based on the systematic variation ("phase cycling") of a sequence of multiple time-delayed femtosecond excitation pulses in order to decode a multitude of novel nonlinear signals from the resulting phase-dependent fluorescence signal. These signals represent any permutation of correlations between zero-, one-, two-, and three-quantum coherences. To this end, two new phase-cycling schemes have been developed which can simultaneously resolve and discriminate several nonlinear signals of sixth order, including those of the fourth order of nonlinearity.
By means of the sixth-order signals recorded in this work, static properties of highly excited electronic states in molecules such as their energies, transition dipole moments, and relative displacement of electronic potential surfaces, as well as dynamic properties in terms of their relaxation kinetics, can be ascertained. Furthermore, it was shown that these signals are suitable for the characterization of exciton-exciton correlations in colloidal quantum dots and for the measurement of ultrafast exciton-exciton annihilation in molecular aggregates.
The experiments performed in this thesis mark an important step towards the complete characterization of the nonlinear response of quantum systems. In view of this, the concept of fluorescence-detected multiple-quantum coherence multidimensional spectroscopy introduced here offers a unified, systematic approach.
In virtue of the technical advantages such as the use of a single excitation beam and the absence of nonresonant contributions, the measurement protocols developed here can be directly transferred to other incoherent observables and to sample systems in other states of matter. Furthermore, the approaches presented here can be systematically extended to higher frequency dimensions and higher orders of nonlinearity.
This work presents excited state investigations on several systems with respect to experimental
spectroscopic work. The majority of projects covers the temporal evolution of
excitations in thin films of organic semiconductor materials. In the first chapters, thinfilm
and interface systems are build from diindeno[1,2,3-cd:1’,2’,3’-lm]perylene (DIP)
and N,N’-bis-(2-ethylhexyl)-dicyanoperylene-3,4:9,10-bis(dicarboximide) (PDIR-CN2)
layers, in the third chapter bulk systems consist of 4,4’,4”-tris[(3-methylphenyl)phenylamino]
triphenylamine (m-MTDATA), 4,7-diphenyl-1,10-phenanthroline (BPhen) and
tris-(2,4,6-trimethyl-3-(pyridin-3-yl)phenyl)borane (3TPYMB). These were investigated
by aggregate-based calculations. Careful selection of methods and incorporation
of geometrical relaxation and environmental effects allows for a precise energetical assignment
of excitations. The biggest issue was a proper description of charge-transfer
excitations, which was resolved by the application of ionization potential tuning on
aggregates. Subsequent characterization of excitations and their interplay condenses
the picture. Therefore, we could assign important features of the experimental spectroscopic
data and explain differences between systems.
The last chapter in this work covers the analysis of single molecule spectroscopy on
methylbismut. This poses different challenges for computations, such as multi-reference
character of low-lying excitations and an intrinsic need for a relativistic description.
We resolved this by combining complete active space self-consistent field based methods
with scalarrelativistic density-functional theory. Thus we were able to confidently
assign the spectroscopic features and explain underlying processes.
KasA is a key enzyme which plays an essential part in the biosynthetic pathway of mycolic acids, the building block of cell wall in Mycobacterium tuberculosis. Its importance was demonstrated by the finding that the depletion of KasA leads to the cell lysis of Mycobacterium tuberculosis. Since Mycobacterium tuberculosis is a pathogen of tuberculosis, the second leading cause of death from an infectious disease worldwide, KasA has drawn attention as one of the attractive drug targets against tuberculosis. Due to the emergence of extensively drug-resistant strains which make most of the known antibiotics for treating tuberculosis ineffective, it became an urgent issue to develop new drugs against tuberculosis. In chapter 3.1, the protonation state of the catalytic residues in the resting state was mainly addressed. The FEP computation and MD simulations were employed for this investigation, and the results showed that the zwitterionic state is most probable. To underpin this conclusion with more solid data, The PESs for the proton transfer between the neutral and zwitterionic state were computed in the context of QM/MM. However, due to the strong dependency of the QM/MM optimization on the initial structure, it was not possible to obtain consistent results from these computations. To circumvent this problem, QM/MM based umbrella sampling was carried out with a semi-empirical method (RM1), and the resulting PMF surface indicated that the zwitterionic state is more stable than the neutral state. In chapter 3.2, the protonation state of significant residues in the acyl-enzyme state was investigated. Unlike other catalytic residues, the protonation state of His311 is ambiguous in the acyl-enzyme state, and different decarboxylation mechanisms can be derived depending on the protonation state of His311 in the acyl-enzyme state. Therefore, FEP computations were carried out to find most probable protonation state of His311 in terms of free energy, and the results showed that the pKa value at Nδ is considerably lowered by the enzyme environment while that of Nε is not. Additionally, the PMF profiles for the proton transfer between Lys340 and Glu354 were computed using QM/MM based umbrellas sampling method, and the results showed that the property of the Lys340/Glu354 pair is neutral rather than ionic when His311 is protonated at Nε. Moreover, a relatively larger ionic character of the Lys340/Glu354 pair when His311 is doubly protonated provides a valuable insight into how the Lys340/Glu354 pair plays a role in shifting the protonated state from Nδ to Nε in His311 after the acyl-transfer step. Overall, the results demonstrated that His311 is neutral and protonated at Nε, and the Lys340/Glu354 pair is also neutral in the acyl-enzyme state. Those computational results lead to the conclusion that the decarboxylation reaction is facilitated by an oxyanion hole which is comprised of two catalytic histidines. In chapter 3.3, the protonation state of catalytic residues in the resting state was revisited because a recent benchmark study showed that the employed semi-empirical method (RM1) in chapter 3.1 tends to overestimate the stabilization of the zwitterionic state. Furthermore, the Lys340/Glu354 pair was considered as purely ionic in chapter 3.1, while it actually has a mixed neutral and ionic character as demonstrated in chapter 3.2. The new investigations employed a larger QM region including the Lys340/Glu354 pair with the BLYP/6-31G** approach, which was proven to be accurate enough for the present purpose by benchmark computations. The new results from the QM/MM MD and FEP computations indicated the catalytic residues to be neutral most probably in the resting state, and this in turn brought up the question how KasA can be activated to initiate the catalytic reaction. On the basis of the results from the MD simulations and FEP computations for the His311Ala mutant in chapter 3.1, we hypothesized that the open conformation of Phe404 would trigger the activation of the catalytic residues by the formation of a strong hydrogen bond. The QM/MM MD simulation proved that the activation of the catalytic residues can indeed be accomplished by the open conformation of Phe404 we suggested, and the corresponding force field based PMF profile also indicated that this conformational change is energetically feasible. The distribution of hydrophilic and hydrophobic residues in the malonyl binding pocket in conjunction with our computational results further provided a valuable insight into the detailed process how the catalytic residues is activated upon the substrate entering.
Subject of this work was to investigate the influence of nonadiabatic coupling on the dynamical changes of electron and nuclear density. The properties of electron density have neither been discussed in the stationary case, nor for excited electronic states or for a coupled electronic and nuclear motion. In order to remove these restrictions one must describe the quantum mechanical motion of all particles in a system at the same level. This is only possible for very small systems. A model system developed by Shin and Metiu [1, 2] contains all necessary physical ingredients to describe a combined electronic and nuclear motion. It consists of a single nuclear and electronic degree of freedom and the particle interaction is parameterized in such a way as to allow for a facile switching between and adiabatic (Born-Oppenheimer type) and a strongly coupled dynamics. The first part of the work determined the “static” properties of the model system: The calculation of electronic eigenfunctions, adiabatic potential curves, kinetic coupling elements and transition dipole moments allowed for a prediction of the coupled dynamics. The potentials obtained from different parameterization showed two distinct cases: In the first case the ground and first excited state are separated by a large energy gap which is the typical Born-Oppenheimer case; the second one exhibits an avoided crossing which results in a breakdown of the adiabatic approximation. Due to the electronic properties of the system, the quantum dynamics in the two distinct situations is very different. This was illustrated by calculating nuclear and electron densities as a function of time. In the Born-Oppenheimer case, the electron density followed the vibrational motion of the nucleus. This was demonstrated in two examples. In the strongly coupled case the wave packet did not exhibit features caused by nonadiabatic coupling. However, projections of the wave function onto the electronic states revealed the usual picture obtained from solutions of the nuclear Schrödinger equation involving coupled electronic states. In that case the nuclear motion triggered charge transfer via nonadiabatic coupling. The second part of the work demonstrated that the model system can easily be modified to yield binding situations often found in diatomic molecules. The different situations can be characterized in terms of bound and dissociative adiabatic potential curves. The investigation focussed on the case of an electronic predissociation, where the ground state is dissociative in the asymptotic limit of large internuclear distances. Within our model system we were able to demonstrate how the character of the electron density changes during the fragmentation process. In the third part we investigated the influence of external fields on the correlated dynamics of electron and nucleus. Employing adiabatic potential curves, the structure of absorption spectra can be understood within the weak-field limit. In the above described Born-Oppenheimer case the adiabatically calculated spectrum was in very good agreement with the exact one, whereas in the strongly coupled case the obtained spectrum was not able to resemble the exact one. Regarding the dynamics during a laser excitation process the time-dependent electron and nuclear densities nicely illustrated the famous Franck-Condon principle. The interaction with strong laser pulses lead to an excitation of many bound electronic and vibrational states. The electron density reflected the classical-like quiver motion of the electron induced by the fast variations of the electric field. The nucleus did not follow these fast oscillations because of its much larger mass. The last part of the work extended the original model system by including an additional electron. As a consequence of the Pauli principle, the spatial electronic wave function has to be either symmetric or anti-symmetric with respect to exchange of the two electrons. This corresponds to anti-parallel or parallel electron spins, respectively. The extended model already contains the physical properties of a many-electron system. Solving the time-dependent Schrödinger equation for a typical vibrational wave packet motion clearly indicated that the electron density is no longer suited to “localize” single electrons. We extended the definition of the electron localization function (ELF) to an exact, time-dependent wave function and demonstrated, how the ELF can be used to further characterize a coupled electron and nuclear motion. Finally, we gave an outlook of how to define electron localization in the case of anti-parallel electron spins. We derived a quantity similar to the ELF denoted “anti-parallel spin electron localization function” (ALF) and demonstrated that the ALF allows to follow time-dependent changes of the electron localization in a numerical example. [1] S. Shin, H. Metiu, J. Chem. Phys. 1995, 102, 9285. [2] S. Shin, H. Metiu, J. Phys. Chem. 1996, 100, 7867.
In der vorliegenden Arbeit wurde erfolgreich eine neue Gasphasen-Apparatur für
Photoelektronen-Imaging-Experimente simuliert, aufgebaut und in Verbindung mit einem ps-Lasersystem in Betrieb genommen.
Neben dem Aufbau der Apparatur stand die Aufklärung der Dynamik angeregter Zustände von aromatischen Heterocyclen und Pyrenen im Fokus dieser Arbeit. Die untersuchten Moleküle wurden durch Resonanzverstärkte Mehrphotonenionisation in einem Molekularstrahlexperiment sowohl zeit-, als auch frequenzaufgelöst untersucht.
This thesis is concerned with the development of an on-line in-situ device for a chemical characterisation of flowing aerosols. The thesis describes the principles and most important features of such a system, allowing also on-line measurements using Raman spectroscopy as a diagnostic technique An analysis of the effect of forced oscillations on the motion of the particle dispersed in a gas flow is given in Chapter 2. Also the most important particle parameters are introduced. A review of the particle/fluid interaction in laminar air flows and the response of the particle is presented. In Chapter 3 the behaviour of the particle under different external conditions (ion bombardment and electric fields) is extended. A brief review of the most important particle charging theories (diffusion, field, and alternating potential charging) shows, that the effect of the electrical properties (represented by the dielectric constant) of the particles affects the charging process. A non-contact method for particle charge measurement was also presented. In the second part of the chapter, the interaction between the electric field and the charged particle for the purpose of particle trapping is illustrated. The most common systems like the two or four ring electrodynamic balance and the quadrupole trap are pointed out. In Chapter 4 a short review of the possibility of using scattered light to study aerosol particles is presented. First, the conditions and the facilities of using the Mie theory for particle size and refractive index determination are mentioned, then some features concerning the classical treatment of the Raman effect are presented Supported by the theoretical considerations exposed in Chapter 2, 3, and 4 the construction and the tests of different devices are presented in Chapter 5. Following the goal of the thesis, first an overview of the used materials and methods for particle generation is presented. Then, the constructed charging devices are described (from the mechanical and electrical point of view) and compared by measuring the acquired charge on the particle. Charged particles can be trapped in different containers. Two types of axially symmetric electrodynamic balances (two ring or an extended four ring configuration) were presented. For a deeper understanding these systems were studied using analytic and numerical methods. Considering the presented purpose of the work another type of trapping system has been developed, namely the quadrupole trap. A similar theoretical characterisation (in term’s of Mathieu equation) as for the electrodynamic balance was presented pointing out some specific features of this system. The incoming particle stream will be focused to the centre of the system simultaneously also the applied DC and AC potential onto the tube electrodes, yields a stable trapping of one or more particles. Chapter 6 consists of two parts: the system for single particle and for many particles investigation. The individual devices presented in Chapter 5 are now put together. The first part presents the method and the experimental realisation of a set-up for solid particle injection. In order to suppress the phase injection disadvantage found for the electrodynamic balance a developed program processes the information obtained from a particle cloud through an adequate electronic detection system, and reduces the number of particles until just one single particle is trapped. The method for one particle investigation can be extended for many particles. Using the presented set-up the particles are moved from one quadrupole to another and transformed from a particle cloud to a particle stream. A linearity between an external vertical mounted detector and the formed image of the particle stream on the CCD camera has been observed and used for simultaneous detection of many particles by Raman spectroscopy. For both methods Raman results are presented. One limitation of Raman Spectroscopy is the relatively long integration time needed for adequate signal-to-noise ratio. There are two factors which influence the integration time: first the incident radiation and the detector sensitivity, and second the intensity of the Raman bands. Using a CCD detector, the desired detector sensitivity should be achieved. So, the improvement of the signal-to-noise ratio should be the next goal in the system development. In order to reduce the integration time an optical system including optic fibres and the integration of an FT-Raman module operating in the visible region is planed. The goal of this work was to develop and construct an instrument for on-line in-situ single particle investigation by Raman spectroscopy. With the presented experimental set-up and the developed program the purpose of the work, the on-line in-situ near atmospheric pressure aerosol investigation was achieved. The Raman spectroscopy has been used successfully for a chemical characterisation of the aerosol particles.
Plasmonic nanostructures are considered promising candidates for essential components of integrated quantum technologies because of their ability to efficiently localize broad-band electromagnetic fields on the nanoscale. The resulting local near field can be understood as a spatial superposition of spectrally different plasmon-polariton modes due to the spectrally broad optical excitation, and thus can be described as a classical wave packet. Since plasmon polaritons, in turn, can transmit and receive non-classical light states, the exciting question arises to what extent they have to be described as quantum mechanical wave packets, i.e. as a superposition of different quantum states.
But how to probe, characterize and eventually manipulate the quantum state of such plasmon polaritons? Up to now, probing at room temperatures relied completely on analyzing quantum optical properties of the corresponding in-going and out-going far-field photon modes. However, these methods so far only allow a rather indirect investigation of the plasmon-polariton quantum state by means of transfer into photons. Moreover, these indirect methods lack spatial resolution and therefore do not provide on-site access to the plasmon-polariton quantum state. However, since the spectroscopic method of coherent two-dimensional (2D) nanoscopy offers the capability to follow the plasmon-
polariton quantum state both in Hilbert space and in space and time domain a complete characterization of the plasmon polariton is possible.
In this thesis a versatile coherent 2D nanoscopy setup is presented combining spectral tunability and femtosecond time resolution with spatial resolution on the nanometer scale due to the detection of optically excited nonlinear emitted electrons via photoemission electron microscopy (PEEM). Optical excitation by amplitude- and phase-shaped, systematically-modified and interferometric-stable multipulse sequences is realized, and characterized via Fourier-transform spectral interferometry (FTSI). This linear technique enables efficient data acquisition in parallel to a simultaneously performed experiment. The full electric-field reconstruction of every generated multipulse sequence is used to analyze the effect of non-ideal pulse sequences on the two-dimensional spectral data of population-based multidimensional spectroscopy methods like, e.g., the coherent 2D nanoscopy applied in this thesis. Investigation of the spatially-resolved nonlinear electron emission yield from plasmonic gold nanoresonators by coherent 2D nanoscopy requires a quasi-particle treatment of the addressed plasmon-polariton mode and development of a quantum model to adequately describe the plasmon-assisted multi-quantum electron emission from nanostructures. Good agreement between simulated and experimental data enables to connect certain spectral features to superpositions of non-adjacent plasmon-polariton quantum states, i.e, non-adjacent occupation-number states of the underlying quantized, harmonic oscillator, thus direct probing of the plasmon-polariton quantum wave packet at the location of the nanostructure.
This is a necessary step to locally control and manipulate the plasmon-polariton quantum state and thus of general interest for the realization of nanoscale quantum optical devices.
The aim of the present work is the development and implementation of new simulation
possibilities for the CAST program package. Development included, among other
things, the partial parallelization of the already existing force fields, extension of the
treatment of electrostatic interactions and implementation of molecular dynamics and
free energy algorithms.
The most time consuming part of force field calculations is the evaluation of the nonbonded
interactions. The calculation of these interactions has been parallelized and
it could be shown to yield a significant speed up for multi-core calculations compared
to the serial execution on only one CPU. For both, simple energy/gradient as well as
molecular dynamics simulations the computational time could be significantly reduced.
To further increase the performance of calculations employing a cutoff radius, a linkedcell
algorithm was implemented which is able to build up the non-bonded interaction
list up to 7 times faster than the original algorithm.
To provide access to dynamic properties based on the natural time evolution of a system,
a molecular dynamics code has been implemented. The MD implementation features
two integration schemes for the equations of motion which are able to generate stable
trajectories. The basic MD algorithm as described in Section 1.2 leads to the sampling
in the microcanonical (NVE) ensemble. The practical use of NVE simulations is limited
though because it does not correspond to any experimentally realistic situation.
More realistic simulation conditions are found in the isothermal (NVT) and isothermalisobaric
(NPT) ensembles. To generate those ensembles, temperature and pressure
control has been implemented. The temperature can be controlled in two ways: by direct
velocity scaling and by a Nose-Hoover thermostat which produces a real canonical
ensemble. The pressure coupling is realized by implementation of a Berendsen barostat.
The pressure coupling can be used for isotropic or anisotropic box dimensions with the
restriction that the angles of the box need to be 90. A crucial simulation parameter in
MD simulations is the length of the timestep. The timestep is usually in the rang of 1fs.
Increasing the timestep beyond 1fs can lead to unstable trajectories since the fastest
motion in the system, usually the H-X stretch vibration can not be sampled anymore.
A way to allow for bigger timesteps is the use of a constraint algorithm which constrains the H-X bonds to the equilibrium distance. For this the RATTLE algorithm has been
implemented in the CAST program. The velocity Verlet algorithm in combination with
the RATTLE algorithm has been shown to yield stable trajectories for an arbitrary
length of simulation time. In a first application the MD implementation is used in conjunction
with the MOPAC interface for the investigation of PBI sidechains and their
rigidity. The theoretical investigations show a nice agreement with experimentally obtained
results. Based on the MD techniques two algorithms for the determination of free
energy differences have been implemented. The umbrella sampling algorithm can be
used to determine the free energy change along a reaction coordinate based on distances
or dihedral angles. The implementation was tested on the stretching of a deca-L-alanine
and the rotation barrier of butane in vacuum. The results are in nearly perfect agreement
with literature values. For the FEP implementation calculations were performed
for a zero-sum transformation of ethane in explicit solvent, the charging of a sodium
ion in explicit solvent and the transformations of a tripeptide in explicit solvent. All
results are in agreement with benchmark calculations of the NAMD program as well
as literature values. The FEP formalism was then applied to determine the relative
binding free energies between two inhibitors in an inhibitor-protein complex.
Next to force fields, ab-initio methods can be used for simulations and global optimizations.
Since the performance of such methods is usually significantly poorer than force
field applications, the use for global optimizations is limited. Nevertheless significant
progress has been made by porting these codes to GPUs. In order to make use of these
developments a MPI interface has been implemented into CAST for communication
with the DFT code TeraChem. The CAST/TeraChem combination has been tested
on the $H_2 O_{10}$ cluster as well as the polypeptide met-Enkephalin. The pure ab-initio
calculations showed a superior behavior compared to the standard procedure where the
force field results are usually refined using quantum chemical methods.
Part 1 of this work describes the development of accurate physically grounded force fields for
intermolecular Cation-π interactions based on SAPT energy decomposition analysis.
The presented results demonstrate the benefits of the used DFT-SAPT method to describe non-bonding
interactions. First of all, this method is able to reproduce the high level CCSD(T) energy values
but using much less computational time. Second it provides the possibility to separate the total
intermolecular interaction energy into several physically meaningful contributions. The relative
contributions of the dimers investigated can be seen in Fig. 6.16. In Tab. 6.3 the percentage
contribution of the attractive energy parts to the stabilization energy is shown. The polarization
energy is important for the NH+...C6H6 interaction, whereas it becomes less crucial
considering other dimers. The dispersion energy contribution is large in the case of
the C6H6...H2O dimers, whereas it is relatively less important for the NH+...C6H6
interaction. The electrostatic energy contributes a large amount of stabilizing energy
in all considered dimer interactions. ...
In dieser Arbeit wurde die unimolekulare Dissoziations- und Rekombinations-Reaktion von Jodmolekülen untersucht, die in mikroporösen Porosil-Kristalliten eingelagert waren. Hierfür wurden sowohl experimentelle Pump-Probe-Experimente als auch theoretische Untersuchungen auf der Femtosekunden-Zeitskala durchgeführt. Die Idee, die diesen Experimenten zugrunde lag, bestand darin, zu erfahren, in welcher Weise und in welchem Maße die Struktur der Umgebung einen Einfluss auf die elementaren dynamischen Prozesse der Reaktion ausübt. Die hier untersuchten Systeme I$_2$ in DDR-, TON-, FER- und MFI-Porosilen sind Modellsysteme für komplexere Moleküle, eingelagert in einer mikroporösen kristallinen Umgebung.
Disentangling the Formation of PAHs in Extreme Environments by IR/UV Double Resonance Spectroscopy
(2023)
Polycyclic Aromatic Hydrocarbons (PAHs) are considered as key building blocks in the formation of carbonaceous particles such as soot. In our immediate surroundings, they are mainly generated in incomplete combustion processes and are further considered as carriers of the Unidentified Infrared Bands which are detected in a wide variety of astrophysical envelopes in the interstellar medium. Currently, astrochemical as well as combustion related models favour small resonance stabilized radicals (RSR) as major contributors to PAHs in sequential reactions. Therefore, we generated two RSR under well-defined conditions to investigate their contribution to PAH formation in a pyrolysis microreactor. The various reaction products were identified by IR/UV ion dip spectroscopy which combines the mass-selectivity of UV light with the structural sensitivity of IR radiation. Finally, we investigated the intermolecular interactions in azaphenanthrene dimers in combination with high-level theoretical calculations and found a preferential formation of pi-stacked van der Waals cluster in a molecular jet expansion.
Einzelstrang-DNA-dispergierte und individualisierte (6,5)-chirale Kohlenstoffnanoröhren bilden als Konjugatsystem den Ausgangspunkt dieser Dissertation. Im Vordergrund stehen dabei Untersuchungen zur Biokompatibilität dieser ssDNA-SWNT-Konjugate sowie deren Verhalten nach Zellpenetration und eine Funktionalisierbarkeit zum Wirkstofftransportsystem. Das erste Projekt widmet sich in Kapitel 4 dem Studium der Konjugatstabilität unter physiologischen Bedingungen und einer Verträglichkeit gegenüber zellulären Systemen. Experimente zur Biokompatibilität werden erstmals an Nanorohrkonjugaten durchgeführt, welche nach Ultrazentrifugation im Dichtegradienten sorgfältig individualisiert vorliegen. Die umgebungssensitiven photophysikalischen Charakteristika vereinzelter (6,5)-SWNTs können zu einer Beurteilung der Konjugatintegrität in physiologischem Milieu genutzt werden. Die Stabilität von ssDNA-SWNT-Strukturen wird in Anwesenheit des Restriktionsenzyms DNase I und dem in Zellnährmedien enthaltenen protein- und nukleasereichem Serum FBS auf die Probe gestellt. In beiden Fällen kann eine ausreichende ssDNA-SWNT-Integrität attestiert werden, die eine Verwendung unter Zellkultivierungsbedingungen erlaubt. Unter Berücksichtigung verschiedener in Zellen vorliegender pH-Umgebungen werden die Konjugate ebenfalls dieser Variation ausgesetzt. Bei Vorliegen stark saurer und basischer pH-Werte kann die Integrität von ssDNA-SWNT-Konjugaten nicht gewährleistet werden, was sich durch Aggregation bemerkbar macht. Innerhalb des breiten pH-Bereichs zwischen den Werten 3 und 11 hingegen kann eine gute Stabilität bestätigt werden. Für zelluläre Anwendungen bedeutet dieser Befund keine Einschränkung, da in Kulturen lediglich neutrale bis schwach saure pH-Werte oberhalb von 4.5 zu finden sind. Nachdem die Biostabilität der ssDNA-SWNT-Konjugate gewährleistet ist, kann in Zytotoxizitätsstudien eine ex vivo-Verträglichkeit des Nanomaterials getestet werden. Erste Untersuchungen mit der Mausmakrophagenlinie J774.1 weisen wie auch ausführliche Studien gegenüber menschlichen Epithelzellen HeLa auf eine uneingeschränkte Kompatibilität in den eingesetzten Konzentrationen hin. HeLa-Zellen, die mit DGU-gereinigten Nanorohrproben behandelt werden, zeigen eine geringfügig höhere Vitalität als nach Inkubation mit einer Rohdispersion undefinierter SWNT-Bündel. Im Gesamtbild ergibt sich somit eine zufriedenstellende Biokompatibilität individualisierter ssDNA-SWNT-Konjugate, womit das in dieser Arbeit zentrale Kohlenstoffnanorohrsystem den Anforderungen für dessen biomedizinische Verwendbarkeit gerecht wird. Der Schwerpunkt weiterer Untersuchungen liegt im zweiten Projekt aus Kapitel 5 auf dem Verhalten von ssDNA-SWNT-Konjugaten nach deren Aufnahme in HeLa-Zellen. Auch hier kann die starke Sensitivität der optischen Eigenschaften individualisierter (6,5)-Kohlenstoffnanoröhren gegenüber Umgebungseinflüssen genutzt werden, um Veränderungen im Emissionsverhalten von SWNTs nach deren zellulärer Aufnahme gegenüber dem Ausgangszustand zu beobachten. Nach ausführlicher Weißlicht-, Fluoreszenz- und SWNT-Photolumineszenzmikroskopie, aus deren Resultaten eine erfolgreiche Internalisierung von ssDNA-SWNTs in HeLa-Zellen eindeutig hervorgeht, stehen PL-spektroskopische Untersuchungen der Kohlenstoffnanoröhren im Vordergrund. Durch einen Vergleich des Emissionsverhaltens der ssDNA-SWNT-Konjugate in und außerhalb von Zellen können spektrale Verschiebungen, Linienverbreiterungen und verkürzte Fluoreszenzlebensdauern nach zellulärer Aufnahme festgestellt werden. Sowohl eine Aggregation von SWNTs als auch eine Beeinflussung durch die pH-Umgebung reichen nicht für eine vollständige Erklärung des Befunds aus. Vielmehr kann die in endosomalen Kompartimenten durch das Größenverhältnis von Endosomen zu SWNTs entstehende räumliche Nähe einer großen Nanorohrmenge untereinander als Ursache für eine Veränderung der dielektrischen Umgebung und folglich des Emissionsverhaltens betrachtet werden. Durch Verwendung der Kohlenstoffnanoröhren als Marker und Sensor können ssDNA-SWNT-Konjugate in Zellen somit nicht nur lokalisiert, sondern darüber hinaus hinsichtlich einer möglichen Aggregation untersucht werden. Aus den in dieser Arbeit vorgestellten Daten kann zwar eine vollständige Aggregation der SWNTs durch deren Aufnahme in Zellen ausgeschlossen werden, sie muss jedoch in geringfügigem Ausmaß neben einer Beeinflussung durch die pH-Umgebung und die große räumliche Nähe durchaus in Betracht gezogen werden. Individualisierte ssDNA-SWNT-Konjugate können damit erstmals zeitaufgelöst PL-mikrospektroskopisch in HeLa-Zellen charakterisiert werden. Für das letzte Projekt werden in Kapitel 6 neuartige Funktionalisierungsmöglichkeiten von ssDNA-SWNT-Konjugaten zu zellulären Transportsystemen unter Erhalt der photophysikalischen Eigenschaften erforscht. Dazu soll das Dispergiermittel DNA als Kupplungsstelle für eine kovalente Anbindung eines Agenz genutzt werden. Anstelle eines Wirkstoffes werden die Untersuchungen mit einem Fluorophor als Modellverbindung durchgeführt, welcher den Vorteil einer einfachen Detektierbarkeit liefert. Prinzipiell besteht die Möglichkeit, das Oligomer mit dem Fluorophor vorzufunktionalisieren und anschließend auf die Oberfläche der SWNTs zu bringen. Als effektiver erweist sich die Methode der direkten Kupplung des Farbstoffs an bereits DNA-dispergierte SWNTs. Der Erfolg in der Präparation von FluorophorssDNA- SWNT-Konjugaten wird über die Emission des Fluorophors mit entsprechenden Referenzexperimenten gemessen. Der Versuch einer Quantifizierung liefert jedoch sehr hohe Werte, die lediglich als eine obere Grenze für die gefundene Anzahl gebundener Fluorophore pro Nanoröhre angesehen werden können. Im Verlauf des Projekts kann eine Funktionalisierbarkeit der Nanoröhren über das Dispergieradditiv DNA als neue Strategie aufgezeigt werden. Im Gegensatz zu bekannten Wirkstofftransportsystemen bietet dieser Funktionalisierungsansatz den Vorteil, dass die optischen Eigenschaften der individualisierten ssDNA-SWNT-Konjugate erhalten bleiben, welche wieder um einen gleichzeitigen Einsatz der Nanoröhren als Transporter und Marker bzw. Sensor erlauben. Die vorliegende Dissertation liefert neben dieser bisher unbekannten Funktionalisierungsstrategie neue Erkenntnisse über die Biokompatibilität speziell von individualisierten ssDNA-SWNT-Konjugaten und deren Verhalten in HeLa-Zellen. Mit diesem Wissen kann der gezielte Wirkstofftransport durch Kohlenstoffnanoröhren als biokompatibles und zellgängiges Trägersystem anvisiert werden.
Im ersten Teil wurde die Dynamik des ersten angeregten Zustandes von drei Truxenonen untersucht. Nach Anregung im sichtbaren Bereich findet ein Elektrontransfer zwischen den Triarylamin-Donor und dem Truxenon-Akzeptor statt. Um die Abhängigkeit der Rate für den Rücktransfer von der elektronischen Kopplung zu untersuchen, wurde diese zum einen über den Abstand zwischen Donor und Akzeptor und zum anderen über die Position der Verknüpfung eingestellt. In einer ersten Studie wurde Truxenon 1, bei dem der direkt über das Stickstoff-Atom an den Akzeptor gekuppelt ist, mit dem System 2 verglichen, bei den die Einheiten über einen Phenyl-Spacer verbunden sind. Der Rücktransfer sollte dabei für das System 1 schneller sein, da ein kurzer Abstand mit einer starken elektronischen Kopplung einhergeht und damit auch mit einem schnellen Elektronentransfer. Allerdings wird die große Rate für das System mit dem größeren Abstand beobachtet (2). Dieses Ergebnis kann mit der Geometrie der Moleküle und der größeren sterischen Hinderung in 1 erklärt werden, aus der eine geringere elektronische Kopplung resultiert. In einem weiteren Experiment wurde die Stärke der elektronischen Kopplung in Abhängigkeit von der Position der Verknüpfung in Bezug auf den Phenyl-Spacer untersucht. Zu diesem Zweck wurden die Systeme 2 und 3 miteinander verglichen. Während in 2 die Einheiten in para-Position verknüpft sind, sind Donor und Akzeptor in 3 in meta-Position an den Phenyl-Spacer gekuppelt. Letzteres System zeichnet sich dabei durch eine geringere Resonanzstabilisierung aus. Dies hat eine geringere elektronische Kopplung zur Folge, was sich auch in den UV/Vis-Spektren zeigt. Die langwelligste Absorption ist hier bei höheren Energien zu beobachten. Zudem deuten die transienten Spektren an, dass in erster Linie nicht der ladungsgetrennte Zustand abgeregt wird sondern vielmehr die Truxenon-Einheit selbst. Im zweiten Teil wurden die Resonanz-Raman-Spektren vier verschiedener Borole aufgenommen. Dabei wurden zwei signifikanten Moden beobachtet, die beim pi –pi∗ -Übergang in ihrer Intensität verstärkt werden. Eine Bande bei 1598 cm-1 wird der symmetrischen Ringatmung zugeordnet, die aus einer Expansion des Borol-Rings resultiert. Eine zweite Schwingung bei 1298 cm-1 resultiert aus einer B-R Streckschwingung. Für System 5 wird diese Schwingung mit einer hohen Intensität beobachtet, während die Bande bei den Systemen 6-8, die mit einem Aryl-Rest substituiert sind, mit sehr geringer Intensität auftritt und deshalb lediglich mit einem hochauflösendem Setup detektiert werden kann. Aufgrund der schwachen Resonanzverstärkung kann von einer schwachen Wechselwirkung zwischen dem Bor und dem Aryl-Rest ausgegangen werden. In Borol 5, in dem eine Ferrocen-Einheit an das Bor gebunden ist, ist die Situation eine andere: nach Anregung des pi-pi*-Übergangs wird die Population im BC_4-Ring verschoben. Dadurch kann vom Eisen keine Elektronendichte mehr in das p_z-Orbital des Bors verschoben werden, die Fe-B-Wechselwirkung wird geschwächt und der Fe-B-Abstand wird vergrößert. Zusammenfassend konnte gezeigt werden, dass die Eigenschaften des Substituenten großen Einfluss auf die elektronische Struktur eines dreifach-substituierten Bor-Atoms hat, das in einer p_z-pi-Konjugation beteiligt ist.
Die vorliegende Arbeit beschäftigt sich mit der theoretischen Untersuchung zweier Themenkomplexe: der Erzeugung Hoher Harmonischer in Molekülen und dem Einfluss von gekoppelter Elektronen-Kern-Dynamik auf Ultrakurzpuls-Ionisationsprozesse und Quantenkontrolle. Während bei der Untersuchung der Hohen Harmonischen die Auswirkungen der Kernbewegung auf die Spektren im Mittelpunkt des Interesses stehen, wird bei der Analyse der gekoppelter Elektronen-Kern-Dynamik das Hauptaugenmerk auf die nicht-adiabatischen Effekte gerichtet, die auftreten, wenn Kern- und Elektronenbewegung sich nicht, wie es im Rahmen der Born-Oppenheimer-Näherung in der Quantenchemie häufig angenommen wird, voneinander trennen lassen.
In der vorliegenden Dissertation wurden Dispergierungseffizienz, Entbündelungseffizienz und
Röhrenqualität von SWNT-Suspensionen untersucht. Die Röhrenqualität wurde durch Messung von Quantenausbeuten bewertet. Außerdem wurden Suspensionen von den drei verschiedenen Rohmaterialien CoMoCAT, Black Sand und HiPCO, hergestellt durch die Behandlung mit Ultraschall und Schermischen, verglichen.
Beim Beschallen zeigte sich wie erwartet eine höhere Dispergierungseffizienz im Vergleich zum Schermischen. Diese war jeweils bei Black Sand am größten, gefolgt von CoMoCAT und HiPCO. Ein Vergleich zwischen zwei HiPCO-Materialien bestätigte die deutlichen Effizienzvorteile
nicht aufgereinigter Materialien. Trotz der viel geringeren Dichte des aufgereinigten HiPCO-Materials, ließ sich dieses durch das Schermischen wesentlich schlechter dispergieren.
Der Effizienzunterschied war jedoch geringer als bei Black Sand und CoMoCAT, was vermutlich auf den geringeren Unterschied der Kohlenstoffanteile zurückzuführen ist. Dieser wiederum hängt von den jeweiligen Herstellungs- und Aufreinigungsverfahren ab.
Die Dispergierungsgeschwindigkeit war für gescherte Black Sand- und CoMoCAT-Proben zu Beginn der Dispergierung höher als für die jeweils beschallten Proben, weshalb durch Kombination der beiden Methoden möglicherweise eine Verbesserung der präparierten Suspensionen bezüglich der drei untersuchten Parameter erreicht werden kann.
Der Vergleich der Entbündelungseffizienzen ergab erneut Vorteile beim Ultraschall gegenüber dem Schermischen. Die beschallten Black Sand- und HiPCO-Proben zeigten hierbei noch eine deutlich effizientere Auftrennung als die Proben des aufgereinigten CoMoCAT-Materials.
Dieses enthält zu jedem Zeitpunkt der Beschallung noch einen entsprechend größeren Anteil an aggregierten Röhren. Beim Schermischen funktionierte die Entbündelung von Black Sand im Vergleich zu CoMoCAT und HiPCO mit Abstand am besten, was sich auch in den ODVerhältnissen
beschallter und gescherter Proben widerspiegelte.
Die beobachtete Quantenausbeute war bei den durch Schermischen dispergierten DGUEinzelrohrproben
um bis zu 50 % höher als bei den beschallten Proben, was auf eine deutlich niedrigere Röhrenbeschädigung und somit auch auf eine höhere Röhrenqualität hindeutete.
Dies wurde auch durch Vergleichsmessungen an Einzelröhren bestätigt. Außerdem dringt bei durch Ultraschall geschnittenen Röhren Wasser ins Röhreninnere ein, was beim Schermischen nicht der Fall ist. Das ermöglicht durch Schermischen vielleicht die Herstellung von Proben mit veränderten Eigenschaften. Beim Vergleich der Materialien zeigte HiPCO die höchste Quantenausbeute. Dieses Herstellungsverfahren liefert also im Vergleich zum
CoMoCAT-Verfahren eine bessere Röhrenqualität. Die um 70 % höheren Quantenausbeuten der Black Sand-Proben im Vergleich zu den CoMoCAT-Proben machten die Röhrenbeschädigungen
bei der Aufreinigung des Rohmaterials deutlich. Werden zudem Beschädigungen durch Ultraschall berücksichtigt, beträgt der Unterschied sogar 250 %.
Die beschallten HiPCO- und Black Sand-Proben der zeitabhängigen Messungen zeigten aufgrund der effizienten Entbündelung den schnellsten Anstieg der uantenausbeuten, welche aufgrund von Beschädigungen durch den Ultraschall, beeinflusst durch die Entbündelungsund
Dispergierungseffizienzen der Materialien, nach 10-20 min wieder abfielen. Die Quantenausbeuten der gescherten Proben stiegen entsprechend langsamer über die gesamte Messzeit von sechs Stunden an.
Die Dispergierung mittels Schermischer bei erhöhter Viskosität führte bei einem Iodixanolanteil von 45 % zu einer fast sechsfach höheren Dispergierungseffizienz im Vergleich zu Wasser.
Auch Lufteinschlüsse scheinen einen Einfluss zu haben, weshalb ein Probenvolumen zwischen 13-14 mL mit dem verwendeten Aufbau am sinnvollsten erscheint. Ob Viskosität und Lufteinschlüsse auch Entbündelungseffizienz und Röhrenqualität beeinflussen, muss noch untersucht werden.
In Kapitel 5 wurde die Dispergierung von Nanoröhren mit kationischem Perylenbisimid untersucht. Nach dem Zusammengeben von PBI-Lösung und SDS-Nanorohrsuspension wurden Flokkulationseffekte beobachtet, welche durch hohe Nanorohr- oder SDS-Konzentrationen verzögert wurden. Das ermöglichte die Herstellung von PBI-Nanorohrfilmen mit Streifenmuster durch Nutzung des Kaffeering-Effektes. Es wurde gezeigt, dass die Nanoröhren in das PBI eingebettet werden können. Allerdings waren die Streifen noch sehr unregelmäßig und die Röhren in den Streifen nicht ausgerichtet.
Die Stabilität der PBI-Nanorohrsuspensionen konnte durch einen Tensidaustausch vom anionischen SDS zum kationischen CTAB verbessert werden. Es konnte gezeigt werden, dass für die Vermeidung von Aggregationen während den dafür nötigen Dialysen unter anderem die möglichst geringe Bewegung der Probe entscheidend ist. Außerdem musste die CTABKrafft-Temperatur von 25 °C berücksichtigt werden. Unterhalb dieser Temperatur bildet das
Tensid keine Mizellen mehr, was die Suspensionen destabilisiert.
Mischexperimente von CTAB-Nanorohrsuspensionen mit Lösungen aus verschiedenen CTAB:PBI-Verhältnissen lieferten Hinweise darauf, dass CTAB alleine die Röhren nicht stabilisiern kann. Ein Grund dafür könnte eine zu geringe Anzahl an positiven Ladungen auf den Röhren sein. Demzufolge wäre immer ein gewisser Anteil an Tensid zur Stabilisierung notwendig. Trotz geringer Tensidbeimischung könnten aber Filme mit in PBI eingebetteten Röhren hergestellt werden. Unter Umständen könnten die Röhren auch in die flüssigkristalline Phase des PBIs eingebettet werden. Ein anderer Grund für die nicht ausreichende Stabilisierung könnte sein, dass die PBI-Aggregate nur sehr schlecht aufgetrennt werden.
Dann könnte das PBI-Adsorptionsverhalten durch eine Verbesserung der Aggregatauftrennung beeinflusst werden.
Zuletzt wurde in der vorliegenden Dissertation die Herstellung von Nanorohrgelfilmen beschrieben.
Neben Homogenität durch Nutzung von Gelatine und Stabilität durch Entfernung von Iodixanol sorgte eine Silikonform für eine einheitliche Dicke und Größe der präparierten (6,5)-Gelfilme. Röhrenaggregationen während der Iodixanolentfernung durch Zentrifugenfiltration
konnten auf die Alterung der verwendeten Suspensionen zurückgeführt werden. Die optischen Dichten der so hergestellten Gelfilme standen immer in ähnlichen Verhältnissen zu denen der Ausgangssuspensionen, sodass die für die Gelfilme benötigten Röhrenkonzentrationen
in den Ausgangssuspensionen relativ genau berechnet werden konnten.
Um das Iodixanol für die Herstellung von (6,5)/(6,4)-Gelfilmen effektiv aus den Suspensionen zu entfernen, wurden drei verschiedene Dialysemembranen getestet. Dabei stellte sich die Membran mit einer Porengröße von 50 kD als bester Kompromiss aus effektiver Iodixanolentfernung
und geringem Röhrenverlust heraus. Durch Einengung der (6,5)/(6,4)-Suspension konnten drei Gelfilme mit ausreichend hohen optischen Dichten hergestellt werden, wobei der dritte Film im Gegensatz zu den ersten beiden aufgrund des immer weiter abnehmenden Probenvolumens eine deutliche Röhrenaggregation zeigt. Dadurch eignen sie sich für weiterführende Experimente, wo mit Hilfe der Transienten-Absorptionsspektroskopie Untersuchungen
zu Energie- und Ladungstransferprozessen zwischen CNTs verschiedener Chiralitäten durchgeführt werden könnten.
Ziel dieser Dissertation war es zu einem besseren Verständnis hinsichtlich folgender Themen beizutragen und Möglichkeiten aufzuzeigen, mit welchen die Voraussetzungen für Anwendungen von einzelnen, funktionalisierten Kohlenstoffnanoröhren, wie u.a. Einzelphotonenquellen, erfüllt werden können.
Eine wesentliche Voraussetzung für die Funktionalisierung von einzelnen Kohlenstoffnanoröhren ist zunächst eine Probenpräparation, welche SWNT-Suspensionen mit einem hohen Anteil an vereinzelten SWNTs hoher PL-Intensität bereitstellen kann. Um solche SWNT-Suspensionen herstellen zu können, wurden drei verschiedene Rohmaterialien und Dispergiermittel auf deren Entbündelungseffizienz- und relativer Photolumineszenzquantenausbeute untersucht. Anhand von photolumineszenzspektroskopischen Untersuchungen und Messungen der Extinktion stellte sich heraus, dass in Kombination des unaufbereiteten CVD-Kohlenstoffnanorohrrußes mit dem Copolymer PFO:BPy als Dispergiermittel und einem speziell in dieser Dissertation entwickelten Herstellungsverfahren für die Mikroskopieproben, stabile (6,5)-SWNT-Suspensionen mit einem großen Anteil an einzelnen SWNTs hoher PL-Intensität, hergestellt werden können.
Letztere Suspension diente als Ausgangsmaterial für die, in dieser Dissertation neuartige, entwickelte Methodik zur Differenzierung zwischen einzelnen SWNTs und Aggregaten mittels PL- und Ramanmessungen an einem PL-Mikroskopie-Aufbau, welche eine weitere Voraussetzung für Einzelpartikelstudien darstellt. Hierbei wurden im Rahmen einer statistischen Messreihe PL- und Ramanspektren von 150 SWNT-Objekten aufgenommen und hieraus resultierend die Parameter FWHM, Energie des S1-Emissions-Zustands und relative Photolumineszenzquantenausbeute ermittelt. Schließlich konnten die zwischen einer einzelnen SWNT und einem Aggregat charakteristischen Differenzen anhand der Korrelationen zwischen den drei Parametern dargestellt werden. Zudem erfolgte eine statistische Analyse zur Bestimmung der statistischen Signifikanz dieser Korrelationen. Hierbei wurde anhand der nicht-parametrischen Spearman-Korrelationskoeffizienten und der p-Werte gezeigt, dass in Kombination dieser drei Messparameter mit einer hohen Wahrscheinlichkeit zwischen einer einzelnen SWNT und einem Aggregat differenziert werden kann. Demnach konnte eine neuartige, im Vergleich zur Literatur, praktikable Methodik zur Differenzierung zwischen einzelnen SWNTs und Aggregaten, etabliert werden, welche die Voraussetzung für Einzelrohrstudien ist.
Der Fokus dieser Dissertation ist die Entschlüsselung der Reaktionsmechanismen der Arylierung und reduktiven Alkylierung von (6,5)-SWNTs im Ensemble und auf Einzelrohrbasis. Durch diese kovalenten Funktionalisierungsverfahren entstehen neue fluoreszierende Defekt-Zustände, deren zeitabhängiges Intensitätsverhalten in der vorliegenden Arbeit näher untersucht wurde. Hinsichtlich der Arylierung von SWNTs mit Diazoniumsalzen postulieren Studien einen zweistufigen Reaktionsmechanismus, welcher durch eine kombinatorische, spektroskopische Gesamtbetrachtung im Rahmen dieser Dissertation bestätigt werden konnte. Auch konnte erstmalig in der Literatur gezeigt werden, dass die Reaktion in hohem Maße reproduzierbar ist.
Reproduzierbarkeitsstudien wurden auch im Falle der reduktiven Alkylierung unternommen, wobei erstmalig festgestellt wurde, dass diese Reaktion lediglich im hohen Maße reproduzierbar ist, sofern die Reduktionslösung mindestens 17 Stunden vor Reaktionsstart angesetzt wird. Basierend auf diesem Resultat, wurden reproduzierbare Messreihen zur Untersuchung der Reaktionsbedingungen und des Reaktionsmechanismus unternommen, da diesbezüglich unzureichend Kenntnis in der Literatur vorhanden ist.
Zur Klärung des Reaktionsmechanismus, von welchem lediglich Annahmen existieren, wurde zum einen der Einfluss der Laseranregung auf die Reaktion untersucht. Da lediglich für den Falle des Ansetzens der Reduktionslösung unmittelbar vor Messbeginn, wobei die reaktiven SO2- -Radikale erzeugt werden, ein Einfluss der Laseranregung festgestellt werden konnte, nicht jedoch im weiteren Reaktionsverlauf, ist von keiner radikalischen Reaktion im Funktionalisierungsschritt auszugehen. Dies konnte durch den Einsatz von Konstitutionsisomeren des Iodbutans bestätigt werden, wobei das Iodbutanisomer, welches im Fall einer radikalischen Reaktion die höchste Reaktivität zeigen sollte, zu keiner Funktionalisierung der SWNTs führte. Im Gegensatz hierzu, konnte durch das 1-Iodbutan, mit dem primären C-Atom, eine hohe PL-Intensität der defekt-induzierten Zustände E11- und T- verzeichnet werden, was die weitere Annahme einer SN2-Reaktion stützt.
Im Rahmen dieser Dissertation konnte zudem erstmalig entdeckt werden, dass unter deren alkalischen, reduktiven Bedingungen, eine Funktionalisierung mit Acetonitril erfolgen kann, was durch die Durchstimmung der PL-Intensität des Defektzustands bei Variation des Volumenanteils von Acetonitril bestätigt werden konnte. Hierbei gilt es jedoch weiter zu analysieren, auf welche Art die Koordination bzw. Funktionalisierung von Acetonitril an den SWNTs erfolgt, was u.a. durch Ramanmessungen untersucht werden könnte.
Auch konnten neuartige Kenntnisse bezüglich der Reaktionskinetik basierend auf den Studien dieser Dissertation erhalten werden, wobei festgestellt wurde, dass das Reaktionsprofil mit dem einer komplexen Folgereaktion angenähert werden kann.
Zudem konnten neuartige Kenntnisse aus der Thermodynamik, wie die Ermittlung der Aktivierungsenergie der Adsorption von DOC-Molekülen auf der SWNT-Oberfläche, durch die Zugabe des Tensids DOC zum Reaktionsansatz und dem hieraus resultierenden Reaktionsabbruch, erhalten werden.
Schließlich fand eine Übertragung der Ergebnisse aus den Ensemblestudien der reduktiven Alkylierung auf Einzelpartikeluntersuchungen statt, wobei letztere erstmalig im Rahmen dieser Arbeit durchgeführt wurden. Aus der statistischen Analyse, welche von Martina Wederhake durchgeführt wurde, resultierte durch Erhöhung des Stoffmengenverhältnisses von 1-Iodbutan zu Kohlenstoff eine inhomogene Steigerung des Funktionalisierungsgrades. Ausblickend gilt es nun zu prüfen, ob die zeitlichen Reaktionsverläufe der photolumineszierenden Zustände, welche aus den Ensemble-Studien erhalten wurden, auf Einzelrohrbasis reproduziert werden können.
Es lässt sich demnach festhalten, dass mithilfe der Studien dieser Dissertation ein Probenherstellungsverfahren, welches stabile SWNT-Suspensionen mit einem großen Anteil an einzelnen Kohlenstoffnanoröhren, hoher PL-Intensität ermöglicht, etabliert werden konnte. Zudem wurde eine neuartige, praktikable und statistisch signifikante Methodik zur Differenzierung zwischen einzelnen Kohlenstoffnanoröhren und Aggregaten entwickelt. Schließlich konnten neue, essentielle Informationen bezüglich des Reaktionsmechanismus und den Reaktionsbedingungen der Arylierung und reduktiven Alkylierung von halbleitenden (6,5)-SWNTs erhalten werden. Wie in der Einleitung bereits erwähnt, sind sowohl der Erhalt einer stabilen SWNT-Suspension mit einem großen Anteil an einzelnen Nanoröhren hoher PL-Intensität, die Möglichkeit der Identifizierung einzelner SWNTs, als auch ein ausgiebiges Verständnis der Reaktionsmechanismen der Funktionalisierungsreaktionen, essentielle Voraussetzungen für die Verwirklichung von Einzelphotonenquellen auf Basis einzelner, funktionalisierter Kohlenstoffnanoröhren. Diese können aufgrund derer geeigneter Emissionseigenschaften als vielversprechende Kandidaten für das Ausgangsmaterial von Einzelphotonenquellen in der Quanteninformationstechnologie angesehen werden.
Elektronische Spektroskopie und Photodissoziationsverhalten von heterocyclischen Biomolekülen
(2009)
Das Photodissoziationsverhalten der Pyrimidinbasen Thymin, Uracil und 5-Methylcytosin wurde mittels Photofragment-Dopplerspektroskopie und Photofragment-Imaging untersucht. Die Photodissoziation erfolgt in allen Fällen in einem statistischen Prozess nach Mehrphotonenabsorption. Von Purin wurde ebenfalls die Photodissoziation untersucht sowie das elektronische Spektrum des niedrigsten n-pi*-Zustands mittels Photofragment-Anregungsspektroskopie und [1+1']-REMPI-Spektroskopie gemessen. Purin zeigt bei den untersuchten Wellenlängen dasselbe Verhalten wie die Pyrimidinbasen. Das Elektronische Spektrum von Purin zeigt über einen Bereich von über 2000 cm^-1 vom Bandenursprung gut strukturierte Banden, von denen die meisten oberhalb 850 cm^-1 als Kombinationsbanden identifiziert wurden.
Die vorliegende Dissertation leistet einen Beitrag zur spektroskopischen Messmethodik nanoskaliger Strukturen. Im Mittelpunkt der Arbeit steht die Entwicklung und Erprobung eines spektrofluorimetrischen Aufbaus, mit dessen Hilfe ein aus Kohlenstoffnanoröhren und DNA-Oligomeren bestehendes supramolekulares Modellsystem einer optischen Untersuchung zugänglich gemacht wird. Die Vielseitigkeit der Messeinheit aus Mikroskop und Spektrometer wird an einer weiteren Substanzklasse untermauert. So wird das Emissionsverhalten von in Siliziumcarbidkristallen induzierten Defektzentren einer räumlich, spektral und zeitlich aufgelösten Charakterisierung unterzogen.
Die zentrale Komponente des Spektrofluorimetrieaufbaus stellt eine Superkontinuumlichtquelle dar. In Verbindung mit einem elektronisch geregelten Filtermodul zur Wellenlängenselektion erlaubt sie die Durchführung von Photolumineszenz-Anregungsexperimenten. Im Gegensatz zu kommerziell erhältlichen Systemen, die überwiegend auf eine spektroskopische Charakterisierung gelöster oder kolloidal stabilisierter Substanzen abzielen, erlaubt der hier realisierte Aufbau auch die PL- mikroskopische Untersuchung kondensierter Proben, was durch die Epi-Bauweise auch opake Substrate einschließt. Der Einsatz von InGaAs-Sensoren weitet das Detektionsfenster auf den Nahinfrarotbereich aus, sowohl hinsichtlich des Kamera- als auch des Spektroskopiekanals.
Anhand verschiedenartiger Kohlenstoffnanorohrproben, die entweder in flüssiger Phase dispergiert oder in festem Zustand als Film abgeschieden vorliegen, wird die Leistungsfähigkeit des PLE-Experiments unter Beweis gestellt. Neben der Zuordnung der Chiralitäten in polydispersen SWNT-Suspensionen wird dies auch durch die Untersuchung von Energietransferprozessen und die Studie von Umgebungseinflüssen demonstriert.
Die Charakterisierung des DNA-SWNT-Modellsystems in mikrofluidischer Umgebung macht von der fluoreszenzmikroskopischen Detektionseinheit Gebrauch. Während die intrinsische Photolumineszenz der Nanoröhren sicherstellen soll, dass Letztere in ausreichender Anzahl auf den mikrostrukturierten Substraten vorhanden sind, wird die extrinsische Photolumineszenz der funktionalisierten Oligonukleotide als spektroskopisches Maß für die DNA-Konzentration herangezogen. Das hierbei beobachtete Agglomerationsverhalten der farbstoffmarkierten Oligomere geht mit einer lokal erhöhten Fluoreszenzintensität einher und erlaubt damit die quantitative Auswertung der auf PL-Einzelbildern basierenden Zeitserien. Zugleich wird damit eine Abschätzung der DNA-Belegung auf den Nanoröhren möglich. Im Falle der aus 16 alternierenden Guanin-Thymin-Einheiten bestehenden Basensequenz lösen sich nach Initiieren des Desorptionsvorgangs ein Großteil der Oligomere von der Nanorohroberfläche ab. Lediglich ein Fünftel bleibt in adsorbierter Form zurück, was sich jedoch für die Hybridstabilität als ausreichend erweist. Die Freisetzung weiterer Oligomere bleibt bei der Versuchstemperatur von 20 °C trotz der hohen Verdünnung aus, da aufgrund des größeren Interadsorbatabstands und der damit verbundenen Abnahme repulsiver Wechselwirkungen die Aktivierungsbarriere für ihre Desorption steigt. Die Stabilität der DNA-SWNT-Konjugate liegt demnach in ihrer kinetischen Inertheit begründet, die sie vor einer Reaggregation bewahrt.
Die Studie der in Siliziumcarbid induzierten Fehlstellendefekte kann als Beleg für die breite Anwendbarkeit des spektrofluorimetrischen Aufbaus gelten. PL-Mikroskopaufnahmen zeigen hierbei, dass die Anzahl der Defektzentren mit der Bestrahlungsintensität kontrolliert werden kann – von einer kontinuierlichen Verteilung bei hohen Strahlungsintensitäten über heterogene Defektansammlungen bis hin zu Einzeldefektstellen bei niedrigen Strahlungsdosen. Letztere resultieren in beugungsbegrenzten Signaturen und erlauben damit eine Charakterisierung des abbildenden Systems sowie des Anregungsfokus. Anhand der PLE-Analyse lässt sich das Absorptionsmaximum abschätzen. Aussagen zur zeitlichen Entwicklung des Emissionsverhaltens werden durch TCSPC-Messungen erhalten. Die abschließende Untersuchung des Photonenflusses mit Hilfe von Korrelationsexperimenten nach Hanbury Brown-Twiss zeigt bei Raumtemperatur kein Auftreten von Photonantibunching.
In this thesis the excited-state dynamics of radicals and biradicals were characterized with femtosecond pump-probe spectroscopy.
These open-shell molecules play important roles as combustion intermediates, in the formation of soot and polycyclic aromatic hydrocarbons, in atmospheric chemistry and in the formation of complex molecules in the interstellar medium and galactic clouds. In these processes molecules frequently occur in some excited state, excited either by thermal energy or radiation. Knowledge of the reactivity and dynamics of these excited states completes our understanding of these complex processes.
These highly reactive molecules were produced via pyrolysis from suitable precursors and examined in a molecular beam under collision-free conditions. A first laser now excites the molecule, and a second laser ionizes it. Time-of-flight mass spectrometry allowed a first identification of the molecule, photoelectron spectroscopy a complete characterization of the molecule - under the condition that the mass spectrum was dominated by only one mass. The photoelectron spectrum was obtained via velocity-map imaging, providing an insight in the electronic states involved. Ion velocity map imaging allowed separation of signal from direct ionization of the radical in the molecular beam and dissociative photoionization of the precursor. During this thesis a modified pBasex algorithm was developed and implemented in python, providing an image inversion tool without interpolation of data points. Especially for noisy photoelectron images this new algorithm delivers better results.
Some highlighted results:
• The 2-methylallyl radical was excited in the ππ*-state with different internal energies using three different pump wavelengths (240.6 , 238.0 and 236.0 nm). Ionized with 800 nm multi-photon probe, the photoelectron spectra shows a s-Rydberg fingerprint spectrum, a highly positive photoelectron anisotropy of 1.5 and a bi-exponential decay ( τ1= 141\pm43 fs, τ2= 4.0\pm0.2 ps for 240.6 nm pump), where the second time-constant shortens for lower wavelengths. Field-induced surface hopping dynamics calculations confirm that the initially excited ππ*-state relaxes very fast to an s-Rydberg state (first experimentally observed time-constant), and then more slowly to the first excited state/ground state (second time-constant). With higher excitation energies the conical intersection between the s-Rydberg-state and the first excited state is reached faster, resulting in shorter life-times.
• The benzyl radical was excited yith 265 nm and probed with two wavelengths, 798 nm and 398 nm. Probed with 798 nm it shows a bi-exponential decay (\tau_{1}=84\pm5 fs, \tau_{2}=1.55\pm0.12 ps), whereas with 398 nm probe only the first time-constant is observed (\tau_{1}=89\pm5 fs). The photoelectron spectra with 798 nm probe is comparable to the spectrum with 398 nm probe during the first 60 fs, at longer times an additional band appears. This band is due to a [1+3']-process, whereas with 398 nm only signal from a [1+1']-process can be observed. Non-adiabatic dynamic on the fly calculations show that the initially excited, nearly degenerate ππ/p-Rydberg-states relax very fast (first time-constant) to an s-Rydberg state. This s-Rydberg state can no longer be ionized with 398 nm, but with 798 nm ionization via intermediate resonances is still possible. The s-Rydberg state then decays to the first excited state (second time-constant), which is long-lived.
• Para-xylylene, excited with 266 nm into the S2-state and probed with 800 nm, shows a bi-exponential decay (\tau_{1}=38\pm7 fs, \tau_{2}=407\pm9 fs). The initially excited S2-state decays quickly to S1-state, which shows dissociative photoionization. The population of the S1-state is directly visible in the masses of the dissociative photoionization products, benzene and the para-xylylene -H.
• Ortho-benzyne, produced via pyrolysis from benzocyclobutendione, was excited with 266 nm in the S2 state and probed with 800 nm. In its time-resolved mass spectra the dynamic of the ortho-benzyne signal was superposed with the dynamics from dissociative photoionization of the precursor and of the ortho-benzyne-dimer. With time-resolved ion imaging gated on the ortho-benzyne these processes could be seperated, showing that the S2-state of ortho-benzyne relaxes within 50 fs to the S1-state.
This thesis gives insights into the real-time dynamics of several free carbenes and radicals on a femtosecond and nanosecond time scale. The experiments were performed with radicals, singlet carbenes and triplet carbenes of various sizes. Several neutral excited states as well as the ionic ground state were characterized. Despite the relevance of such reactive intermediates in almost all chemical reactions, only relatively little experimental information on such systems is found in the literature. This is linked to the experimental challenge of producing such species under isolated conditions. The intermediates are formed from precursor molecules under interaction- free conditions by supersonic jet flash pyrolysis. The precursor molecules were synthetically designed to show clean thermal dissociation into one specific intermediate. A large variety of spectroscopic techniques was applied to study the intermediates. Each method augments the results of the other methods. This enabled to successfully approach the main goal of this thesis: to understand the excited-state dynamics of organic intermediates. The excited states were found to deactivate rapidly to the hot ground state. The observed fast decay is presumably linked to coupled electronically excited states and relaxation takes place by internal conversion or conical intersections. Further reactions then take place on the ground state surface. Absorption spectra, photodissociation dynamics, photoelectron spectra, ionization potentials, excited-state lifetimes and dissociative photoionization were elucidated by the measurements. Pulsed and continuous light sources were used over a large spectral range (UV, Vis, VUV). A well-defined amount of energy was deposited into the molecule. After internal conversion has taken place, a microcanonical ensemble of reactive intermediates can be studied. This data helps to understand the energetics and reaction channels of intermediates. Velocity map imaging enabled to monitor the pyrolysis efficiency in real time by analyzing photoion images. This observation facilitates clean intermediate generation. Experimental results were compared to quantum chemical calculations to aid the interpretation as well as to test the performance of theoretical approaches. Hydrocarbon radicals and carbenes are regarded as benchmark systems for computational methods due to their several low-lying electronic states and open-shell electronic configuration. The experimental data can help to identify and understand the contributions of the examined intermediates to the chemistry of high energy environments (e. g., hydrocarbon cracking reactors, interstellar space and combustion chambers). Here increased numbers of hydrocarbon intermediates are often present and usually have a strong impact on the overall reaction mechanism. Such environments contain in general a complex mixture of several different intermediates. The more spectroscopic and dynamic properties of each isolated intermediate are known, the easier it is to identify it among multiple components and to understand how it contributes to the overall reaction mechanism. Electronic excitation can take place by radiation, particle collisions or thermally at very high temperatures. How excited states influence the reaction mechanisms is still a matter of currant research.
This work focuses on theoretical approaches for predicting the valence and core excited states of aggregate systems. For the valence excitations, TD-HF and TD-DFT with different functionals have been tested at the Perylene bisimide (PBI) system. A simple character analysis method based on the calculated transition dipole moments is proposed. However, this method does not work for excited states without any transition dipole moment. Thus, we proposed a more general and more valid method based on a calculated CIS type wavefunction for the character analysis. Furthermore, a model Hamiltonian method is derived from a localized picture. The energies of the diabatic states and the corresponding coupling parameters were also determined on the basis of ab initio calculations. For the core excitation, three different methods were validated for C 1s-excited and ionized states if several small molecules. Also we tested the basis sets dependence of these core excited states. Based on those results, we chose the frozen core approximation method to evaluate the core excited states of NTCDA molecules. In order to explain the findings in the experiments, we developed an algorithm to evaluate the exciton coupling parameter where non-orthogonal MOs are used.
The scope of computational chemistry can be broadened by developing new methods and more efficient algorithms. However, the evaluation of the applicability of the methods for the different fields of chemistry is equally important. In this thesis systems with an unusual and complex electronic structure, such as excitonic states in organic semiconductors, a boron-containing bipolaron and the excited states of pyracene were studied and the applicability of the toolkit of computational chemistry was investigated. Concerning the organic semiconductors the focus was laid on organic solar cells, which are one of the most promising technologies with regard to satisfying the world's need for cheap and environmentally sustainable energy. This is due to the low production and material costs and the possibility of using flexible and transparent devices. However, their efficiency does still not live up to the expectations. Especially the exciton diffusion lengths seem to be significantly too short. In order to arrive at improved modules, a fundamental understanding of the elementary processes occurring in the cell on the molecular and supramolecular level is needed. Computational chemistry can provide insight by separating the different effects and providing models for predictions and prescreenings. In this thesis, the focus was laid on the description of excitonic states in merocyanines and perylene-based dyes taking the influence of the environment into account.
At first, the photochemical isomerization between two configurations of 6-nitro BIPS observed experimentally was studied by first benchmarking several functionals against SCS-ADC(2) in the gas phase and subsequently calculating the excited-state potential energy surface. The geometries obtained from a relaxed scan in the ground state as well as from a scan in the excited state were used. The environment was included using different polarizable continuum models. It was shown that the choice of the model and especially the question of the state specificity of the approach is of vital importance. Using the results of the calculations, a two-dimensional potential energy surface could be constructed that could be used to explain the experimental findings. Furthermore, the importance of the excited-state isomerization as a potential deactivation channel in the exciton transport was pointed out.
Then the assessment of the suitability of different merocyanines for optoelectronic applications with quantum-chemical methods was discussed. At first, the effect of the environment on the geometry, especially on the bond length alternation pattern, was investigated. It was shown that the environment changes the character of the ground-state wave function of several merocyanines qualitatively, which means that the results of gas-phase calculations are meaningless - at least when a comparison with solution or device data is desired. It was demonstrated that using a polarizable continuum model with an effective epsilon, a qualitative agreement between the calculated geometry and the geometry in the crystal structure can be obtained. Therefore, by comparing the bond length alternation in solution and in the crystal, a rough estimate of the effect of the crystal environment can be made.
It was further shown that the connection between the HOMO energy and the open-circuit voltage is not as simple as it is often implied in the literature. It was discussed that it is not clear whether the HOMO of a single molecule or a $\pi$-stack containing several monomers should be used and if the environmental charges of the bulk phase or the interface should be included. Investigating the dependence of the HOMO energy on the stack size yielded no definitive trend. Furthermore, it was discussed that the effect due the optimization of the modules (solvent, bulk heterojunction) during the production masks any potential correlation between the HOMO energy and measured open-circuit values. Therefore, a trend can only be expected for unoptimized bilayer cells. It was concluded that ultimately, the importance of the HOMO energy should not be overestimated.
The correlation between the exciton reorganization energy and the so-called cyanine limit, which is predicted by a simple two-state model, was also discussed. By referring to the results of VB calculations, it was discussed that the correlation indeed exists and is non-negligible, although the effect is not as strong as one might have expected. In this context, a potential application of a VB/MM approach was covered briefly. The importance of the molecular reorganization energy and the device morphology was also discussed.
It was concluded that the optimization of merocyanines for organic optoelectronic devices is inherently a multiparameter problem and one cannot expect to find one particular parameter, which solely controls the efficiency.
The perylene-based dyes were studied with a focus on the description of a potential trapping mechanism involving an intermolecular motion in a dimer. The aim was to find methods which can be applied to larger model systems than a dimer and take the effect of the environment into account. As a test coordinate the longitudinal shift of two monomers against each other was used. At first, it was demonstrated how the character of an excited state in a dimer can be defined and how it can be extracted from a standard quantum-chemical calculation. Then several functionals were benchmarked and their applicability or failure was rationalized using the character analysis. Two recipes could be proposed, which were applied to a constraint optimization (only intermolecular degrees of freedom) in the excited states of the PBI dimer and to the description of the potential energy surfaces of ground and excited states along a longitudinal displacement in the perylene tetramer, respectively.
It was further demonstrated that the semi-empirical OMx methods fail to give an accurate description of the excited-state potential energy surfaces as well as the ground-state surface along the test coordinate. This failure could be attributed to an underestimation of overlap-dependent terms. Consequently, it could be shown that the methods are applicable to large intermolecular distances, where the overlap is negligible. The results of DFT calculations with differently composed basis sets suggested that adding an additional single p-function for each atom should significantly improve the performance.
QM/MM methods are ideally suited to take the effect of the environment on a a dimer model system into account. However, it was shown that standard force fields also give an incorrect description of the interaction between the monomers along the intermolecular coordinate. This failure was attributed to the isotropic atom-atom interaction in the repulsion term of the Lennard-Jones potential. This was corroborated using two simple proof-of-principle anisotropy models. Therefore, a novel force field called OPLS-AA_O was presented that is based on OPLS-AA, but uses an anisotropic model for the repulsion. The model involves the overlap integral between the molecular densities, which are modeled as a sum of atom-centered p-type Gaussian functions. It was shown that using this force field an excellent agreement with the DFT results can be obtained when the correct parameters are used. These parameters, however, are not very generalizable, which was attributed to the simplicity of the model in its current state (using the same exponential parameter for all atoms). As a short excursion, the applicability of an MO-based overlap model was discussed.
It was demonstrated that the repulsion term based on the density overlap can be used to correct the failure of the OMx methods for the ground states. This is in accord with the assumption that an underestimation of the overlap terms is responsible for the failure.
It was shown that OPLS-AA_O also gives an excellent description of the longitudinal shift in a PBI tetramer. Using the tetramer as a test system and applying the recipe obtained in the TDDFT benchmark for the QM-part and OPLS-AA_O for the MM-part in conjunction with an electrostatic embedding scheme, a QM/MM description of the excited states of the PBI dimer including the effect of the environment could be obtained.
In the last chapter the theoretical description of the Bis(borolyl)thiophene dianion and the excited states of pyracene were discussed. The electronic structure of the Bis(borolyl)thiophene dianion - a negative bipolaron - was elucidated using DFT and CASPT2 methods. Furthermore, an estimation of the extent of triplet admixture to the ground state due to spin-orbit coupling was given.
In the second project the S1 and S2 states of pyracene were computed using SCS-CC2 and SCS-ADC(2) and an estimation for the balance between aromaticity and ring strain was given. This also involved computing the vibrational frequencies in the excited states.
In both studies the results of the computations were able to rationalize and complete experimental results.
Zahlreiche theoretische und experimentelle Untersuchungen haben erwiesen, dass in halbleitenden Kohlenstoffnanoröhren durch Absorption von Licht hauptsächlich Exzitonen erzeugt werden. Die photophysikalischen Eigenschaften und insbesondere die Prozesse nach der optischen Anregung sind aber gegenwärtig noch nicht vollständig verstanden. Zeitaufgelöste Spektroskopie bietet die Möglichkeit, diese Prozesse zu verfolgen und somit detaillierten Einblick in das photophysikalische Verhalten von Kohlenstoffnanoröhren zu nehmen. Hierbei scheinen auch extrinsische Faktoren - zu nennen sind die Herstellungsmethode, die Art der Probenpräparation, der Aggregationsgrad sowie der durch das Lösungs- bzw. Dispersionsmittel bedingte Einfluss - eine entscheidende Rolle zu spielen.
In dieser Dissertation wurden die Exzitonengröße sowie die exzitonische Dynamik in einwandigen Kohlenstoffnanoröhren mittels transienter Absorptionsspektroskopie sowie stationärer und zeitaufgelöster Photolumineszenzmessungen untersucht. Alle Experimente fanden dabei an halbleitenden (6,5)-Kohlenstoffnanoröhren statt, deren chirale Anreicherung durch Dichtegradientenultrazentrifugation gelang. Für die temperaturabhängigen Messungen wurde ein Verfahren zur Herstellung von tensidstabilisierten Gelatinefilmen entwickelt. Diese zeichnen sich durch eine hohe Temperaturstabilität bei gleichzeitiger Minimierung von Streulichteffekten aus.
Die Bestimmung der Exzitonengröße erfolgte mit Hilfe des Phasenraumfüllmodells, das die intensitätsabhängige Änderung der Oszillatorstärke eines Übergangs mit der Exzitonengröße verknüpft. Hierfür wurden leistungsabhängige Messungen der transienten Absorption durchgeführt und die Signalintensität des Photobleichens gegen die absorbierte Photonenflussdichte aufgetragen. Da diese beiden Größen nur bei geringer Exzitonendichte in einer linearen Beziehung stehen, aus der sich die Exzitonengröße berechnen lässt, wurde im Experiment besonderer Wert auf niedrige Anregungsfluenzen und deren exakte Bestimmung gelegt. Um den Einfluss der Aggregation quantifizieren zu können und den Vergleich mit der Literatur zu erleichtern, fanden die Untersuchungen sowohl an individualisierten als auch an aggregierten Röhrenproben statt. Die Datenanalyse, bei der erstmalig die stimulierte Emission sowie der spektrale Überlapp von Photoabsorptions- und Photobleichbande Berücksichtigung fanden, ergab für individualisierte (6,5)-Nanoröhren einen Wert von 12.0 nm für die Größe des S1-Exzitons, während diese bei der aggregierten Röhrenprobe nur 5.6 nm beträgt. Die Probenabhängigkeit der Exzitonengröße macht den Vergleich mit anderen experimentell ermittelten Werten schwierig. Diese liegen fast ausschließlich zwischen 1 nm und 4.5 nm, ihre Bestimmung fand aber teilweise an stark aggregierten bzw. polydispersen Proben statt. Theoretische Berechnungen liefern für die Exzitonengröße Werte zwischen 1 nm und 4 nm. Zwar gelten einige der Berechnungen für Vakuum, was verglichen zu einer experimentell in Lösung bzw. im Film bestimmten Exzitonengröße einen kleineren Wert mit sich bringt, jedoch kann allein hierdurch die Diskrepanz zu der in dieser Arbeit ermittelten Exzitonengröße von 12.0 nm nicht erklärt werden. Setzt man experimentell und theoretisch für Vakuum bestimmte Werte für die Exzitonengröße und die Bindungsenergie in einen einfachen Zusammenhang, entspricht eine Exzitonengröße von 12.0 nm einer Bindungsenergie zwischen 0.21 eV und 0.27 eV. Die mittels Zweiphotonenexperimenten ermittelten Werte für die Bindungsenergie von (6,5)-Kohlenstoffnanoröhren befinden sich zwischen 0.37 eV und 0.42 eV; diese wurden allerdings unter Zuhilfenahme eines vereinfachten zylindrischen Modells abgeschätzt. Weitere experimentelle und theoretische Untersuchungen könnten klären, inwieweit eine exzitonische Bindungsenergie zwischen 0.21 eV und 0.27 eV für (6,5)-SWNTs in Betracht kommt.
Strahlender und nichtstrahlender Zerfall in den Grundzustand scheinen in (6,5)-Kohlenstoffnanoröhren durch eine Dynamik zwischen verschiedenen Zuständen sowie durch die Diffusion der Exzitonen beeinflusst zu werden. Um diese für die Rekombination maßgeblichen Prozesse besser zu verstehen, wurden temperaturabhängige Messungen der stationären und zeitaufgelösten Photolumineszenz sowie der transienten Absorption durchgeführt. Die Ergebnisse der stationären PL-Experimente deuten darauf hin, dass die Exzitonen zwischen dem optisch aktiven Singulettzustand mit A2-Symmetrie - im Folgenden mit [B] bezeichnet - und einem energetisch tiefer liegenden dunklen Zustand [D] gestreut werden. Mit einem Wert von 5 meV für die energetische Aufspaltung zwischen [B] und [D] gelingt eine gute Anpassung an die Daten, was mit Blick auf die Bandstruktur von (6,5)-SWNTs vermuten lässt, dass es sich bei [D] um den A1-Singulettzustand handelt. Außerdem scheint eine nichtthermische Verteilung der Exzitonen auf [B] und [D] vorzuliegen, wobei strahlende Rekombination nur vom Zustand [B] aus möglich ist. Mit diesen Annahmen kann das temperaturabhängige Verhalten der stationären Photolumineszenz modelliert werden, die Ergebnisse der zeitaufgelösten PL-Messungen jedoch nicht. Mit einem rein diffusionsdominierten Modell gelingt dies ebenso wenig, so dass zur Interpretation des PL-Zerfalls vermutlich ein Modell entwickelt werden muss, in dem sowohl die Streuung der Exzitonen zwischen [B] und [D] als auch das durch Diffusion bedingte Löschen an Defektstellen oder Röhrenenden Berücksichtigung findet. Die Bedeutung der Diffusion von Exzitonen zu Defektstellen oder Röhrenenden, an denen bevorzugt nichtstrahlender Zerfall stattfindet, kann durch spektral- und zeitaufgelöste PL-Messungen belegt werden. Abhängig von der zur Verfügung stehenden thermischen Energie und der Höhe der Potenzialbarrieren des untersuchten Systems kann die Diffusion niederenergetischer Exzitonen, die sich in Potenzialminima befinden, soweit eingeschränkt werden, dass diese eine fast bis um den Faktor zwei längere PL-Lebensdauer aufweisen als höherenergetische Exzitonen. Das unterschiedliche Verhalten von transienter Absorption und zeitaufgelöster Photolumineszenz bei Temperaturen zwischen 14 K und 35 K zeigt, dass die Repopulation des Grundzustands hauptsächlich von einem anderen Zustand aus erfolgt als die strahlende Rekombination. Ob es sich hierbei aber um den mit [D] bezeichneten A1-Singulettzustand oder einen anderen dunklen Zustand handelt, kann nicht abschließend geklärt werden.
Aufgrund inhomogener Verbreiterung stellt die Halbwertsbreite der Banden im Absorptionsspektrum ein Maß für die Höhe der Potenzialbarrieren bzw. für die energetische Verteilung der Exzitonen im angeregten Zustand dar. In dieser Arbeit wurde anhand vier verschiedener Nanorohrsuspensionen gezeigt, dass Sättigungsverhalten der transienten Absorption von (6,5)-Kohlenstoffnanoröhren und Bandenbreite im Absorptionsspektrum demselben Trend folgen. Begründen kann man dies damit, dass das Sättigungsverhalten der transienten Absorption durch Exziton-Exziton-Annihilation bestimmt wird. Aufgrund ihrer eindimensionalen Struktur unterliegen Kohlenstoffnanoröhren einer starken Beeinflussung durch die Umgebung. Abhängig vom Lösungs- bzw. Dispersionsmittel resultiert eine unterschiedliche inhomogene Verbreiterung der Absorptionsbanden und damit unterschiedlich hohe Potenzialbarrieren im angeregten Zustand. Niedrige Potenzialbarrieren erlauben eine weitreichende Diffusion der Exzitonen, sodass effiziente Exziton-Exziton-Annihilation schon bei einer vergleichsweise geringen Exzitonendichte stattfindet und das Signal der transienten Absorption bei einer niedrigen Impulsfluenz sättigt.
In summary, we have prepared single-wall carbon nanotube (SWNT) thin films by the method of evaporation-induced self-assembly (EISA). Using the scalable two-plate or lens setups, sorts of different film types or patterns of SWNTs has been successfully fabricated directly from the evaporation of solvents and could be precisely controlled by the concentrations of SWNT in ambient conditions. The special geometry of meniscus as the capillary bridge has not only given rise to a much higher efficiency of fabrication than what previously reported but also allowed us to monitor the pinning and depinning process carefully and further investigate the mechanism underlying the formation of different film morphologies.
In contrast with the conventional "stick-slip" model, we have provided the new dynamical pinning and zipping model for the contact line (CL) behavior. By analyzing the motion of CL and varying deposited patterns, the traditionally so-called "stick" state should be treated as a dynamical pinning process due to the interfacial tension contrast between SWNT-covered and bare silicon surface. Besides, the plausible one-step "slip" motion could be dominated by the zipping-like kink propagation.
In addition, the experiments with heated substrates at higher temperatures between 30°C and 50 °C have shown that the striped pattern could be fabricated by both much lower SWNT and SDS concentrations than that in room temperature, which is consistent with our model of interfacial tension contrast. In this situation, the deposition rate was increased but the quality of SWNT alignment was undermined because the corresponding moving velocity of SWNT was also too fast for SWNTs to rotate when the evaporative rate was high.
The similar results were identified by the SWNT/polymer conjugates dispersed in chloroform under the similar setups and other identical conditions. The typical breathing motion of dynamical pinning and zipping-like propagation for depinning were confirmed by the new suspensions despite that some morphological parameters changed dramatically compared with that from the aqueous solution. For example, the spacing between stripes reached 100 µm ~ 200 µm because the large contact angle contrast between HDMS- and SWNT-covered surface accompanies with the high evaporation rate of chloroform in the pinning and depinning process. Likewise the average CL velocity for fabrication reached around 20 µm/s due to the much higher evaporation rate of chloroform than water.
Using alike suspensions, the modified EISA method called dose-controlled floating evaporative self-assembly (DFES) was employed to implement the self-assembly of SWNTs on the water/air interface and then deposit them on solid substrate by directed floating. Although the stripes were fabricated successfully by drops with certain doses and SWNT concentrations, there inevitably existed randomly oriented SWNTs from the water surface that built networks between the stripes containing well-aligned tubes. In order to slow down the evaporation rate and monitor the process detailedly, we used chlorobenzene as the solvent instead of chloroform and find the typical pinning/depinning movement of the CL. A preliminary analysis of the results in terms of chlorobenzene implied that the CL possibly followed the similar pinning/depinning process in consistence with our model with capillary bridge.
In the last part of the thesis, the primary research on the optical properties of these stripes of ultrahigh purity semiconducting nanotubes was conducted by fluorescence microscopy and photoluminescence excitation (PLE) spectroscopy. The energy transfer of the photogenerated excitons was confirmed between different tube species with controlled band gaps.
In short, the experiments performed in this thesis allowed to gain new insights about the fabrication of large-area SWNT thin films by the cost-effective solution-processed method and most importantly to uncover its intrinsic mechanism as well. Combined with the separation and selection technique like density gradient centrifugation or polyfluorene derivatives assisted method, highly monodisperse semiconducting nanotubes could be deposited into organized, controllable and functional arrays.
Beyond the ambient conditions, precise control for the evaporation under preset temperature and vapor pressure could possibly extend the technique to the industry level. Assisted by some other mature techniques such as roll-to-roll printing, the cost-effective method could be widely used in the manufacture of various thin film devices. More complex 2D or even 3D structures could be designed and accomplished by the method for the functional or stretchable requirements. Further research on the fundamental exciton transition and diffusion in different networks or structures of SWNTs will be the significant precondition for the real applications.
Looking ahead, from the individual carbon nanotube to its thin film, this promising material with outstanding properties had many challenges to overcome before the real-world applications. Thanks to the availability of pure and well-defined materials, the scalable solution-processed approaches for fabrication of thin films should be able to unlock the potential of carbon nanotubes and exploit them in (opto-)electronic devices in the foreseeing future.
In this work, femtosecond laser pulses are used to launch optical excitations on different nanostructures. The excitations are confined below the diffraction limit and propagate along the nanostructures.
Fundamental properties of these ultrashort optical near fields are determined by characterizing the far-field emission after propagation with a setup developed for this task. Furthermore, control of the nanooptical excitations' spatial and temporal evolution is demonstrated for a designed nanostructure.
Pericyclic reactions possess changed reactivities in the excited state compared to the ground state which complement each other, as can be shown by simple frontier molecular orbital analysis. Hence, most molecules that undergo pericyclic reactions feature two different photochemical pathways. In this thesis an investigation of the first nanoseconds after excitation of Diazo Meldrum’s acid (DMA) is presented. The time-resolved absorption change in the mid-infrared spectral region revealed indeed two reaction pathways after excitation of DMA with at least one of them being a pericyclic reaction (a sigmatropic rearrangement). These two pathways most probably start from different electronic states and make the spectroscopy of DMA especially interesting. Femtochemistry also allows the spectroscopy of very short-lived intermediates, which is discussed in context of the sequential mechanism of the Wolff rearrangement of DMA. An interesting application of pericyclic reactions are also molecular photoswitches, i.e. molecules that can be switched by light between two stable states. This work presents a photoswitch on the basis of a 6-pi-electrocyclic reaction, whose reaction dynamics after excitation are unravelled with transient-absorption spectroscopy for both switching directions. The 6-pi-electrocyclic reaction is especially attractive, because of the huge electronic changes and subsequent absorption changes upon switching between the ring-open and ring-closed form. Fulgides, diarlyethenes, maleimides as well as spiropyrans belong to this class of switches. Despite the popularity of spiropyrans, the femtochemistry of the ring-open form (“merocyanine”) is still unknown to a great extent. The experiments in this thesis on this system combined with special modeling algorithms allowed to determine the quantum efficiencies of all reaction pathways of the system, including the ring-closure pathway. With the knowledge of the reaction dynamics, a multipulse control experiment showed that bidirectional full-cycle switching between the two stable states on an ultrafast time scale is possible. Such a controlled ultrafast switching is a process which is inaccessible with conventional light sources and may allow faster switching electronics in the future. Theoretical calculations suggest an enantioselective photochemistry, i.e. to influence the chirality of the emerging molecule with the chirality of the light, a field called “chiral control”. The challenges that need to be overcome to prove a successful chiral control are extremely hard, since enantiosensitive signals, such as circular dichroism, are inherently very small. Hence, chiral control calls for a very sensitive detection as well as an experiment that cancels all effects that may influence the enantiosensitive signal. The first challenge, the sensitive detection, is solved with a polarimeter, which is optimized to be combined with femtosecond spectroscopy. This polarimeter will be an attractive tool for future chiral-control experiments due to its extreme sensitivity. The second challenge, the design of an artefact-free experiment, gives rise to a variety of new questions. The polarization state of the light is the decisive property in such an experiment, because on the one hand the polarization carries the chiral information of the excitation and on the other hand the change of the polarization or the intensity change dependent on the polarization is used as the enantiosensitive probing signal. A new theoretical model presented in this thesis allows to calculate the anisotropic distribution of any given pump-probe experiment in which any pulse can have any polarization state. This allows the design of arbitrary experiments for example polarization shaped pump-probe experiments. Furthermore a setup is presented and simulated that allows the shot-to-shot switching between mirror-images of light polarization states. It can be used either for control experiments in which the sample is excited with mirror-images of the pump polarization or for spectroscopy purposes, such as transient circular dichroism or transient optical rotatory dispersion. The spectroscopic results of this thesis may serve as a basis for these experiments. The parallel and sequential photochemical pathways of DMA and the feasibility of the bidirectional switching of 6,8-dinitro BIPS in a pump–repump experiment on the one hand offer a playground to test the relation of the anisotropy with the polarization of the pump, repump and probe pulse. On the other hand control experiments with varying pump and repump polarization may be able to take influence on the dynamics after excitation. Especially interesting is the combination of the 6,8-dinitro BIPS with the polarization-mirroring setup, because the closed form (spiropyran) is chiral. Perhaps in the future it will be possible to prove a cumulative circular-dichroism effect or even a chiral control with this system.
Photoinduced processes are nowadays studied with a huge variety of spectroscopic methods. In the liquid phase, transient absorption spectroscopy is probably the most versatile pump–probe technique used to study light-induced molecular phenomena. Optical time-resolved spectroscopy is established in a large number of laboratories and is still further being developed with respect to many technical aspects. Nevertheless, the full potential of shortening the data-acquisition time—necessary for the investigation of rapidly photodegrading samples and observation of macroscopically fast processes—achievable with high-repetition-rate laser systems and shot-to-shot detection was not fully exploited. Especially, shot-to-shot detection is highly beneficial due to the high correlation of subsequent laser pulses.
The development and implementation of 100 kHz broadband shot-to-shot data acquisition was presented in Chapter 3. For an established laser dye as a benchmark system, ultrafast excited-state dynamics were measured for the first time with broadband shot-to-shot detection at 100 kHz. An analysis of both the noise characteristics of the employed laser and the correlation of subsequent pulses quantified the advantage of shot-to-shot data acquisition. In the utilized software environment, the time for measuring a complete data set could be sped up by a factor of three or even higher compared to a laser system working at 1 kHz. So far, the limiting factor is the data processing and the movement of the mechanical delay stage. Nevertheless, the new shot-to-shot detection has the potential to shorten the measurement time up to a factor of 100. The data quality is improved by a factor of three when the hitherto conventional averaging scheme is compared to shot-to-shot acquisition for the same number of laser pulses. The expansion of shot-to-shot data acquisition for high repetition rates will allow studies on sensitive samples as exposure times can strongly be reduced to achieve the same signal-to-noise ratio. In addition, multidimensional spectroscopy can also be extended to high-repetition shot-to-shot readout allowing an efficient recording of data. Therefore, in future experiments, dynamics and couplings in sensitive samples and kinetic processes could be studied in more detail.
Complex photophysical and photochemical phenomena are subject of many fields of research. Many of these multifaceted processes are not yet fully understood. Therefore, a possible approach is the elucidation of single reaction steps with the combination of transient absorption spectroscopy and a suitable, less complex model system. The systematic variation of the model system’s properties and environments, e.g., by chemical substitution or adequate choice of the solvent allows the determination of essential entities and reactivities thereof. Proper knowledge of an individual intermediate step and its determining factors can enhance the understanding of the complete photoreaction process.
The application of transient absorption spectroscopy was shown for the optically-induced electron transfer in a series of donor–acceptor oligomers in Chapter 4. In general, the solvent relaxation times were isolated from the back-electron-transfer dynamics by a global lifetime analysis. For the smallest oligomeric structure where complete charge separation is possible, an ultrafast equilibration leads to charge recombination from the configuration showing the lowest barrier for recombination. The back-electron transfer strongly depends on the utilized solvent. Whereas in dichloromethane the back-electron transfer occurs with the maximum rate in the barrierless optimal region, the dynamics in toluene are governed by a Marcus inverted-region effect. The experimentally observed rates were also estimated by theoretical calculations of the respective barriers. The study did not only successfully unravel charge transfer in the oligomeric systems but also improved the understanding of the electron-transfer properties of larger polymers from an earlier study. Therefore, the combination of length variation and time-resolved spectroscopy is an important step towards the correct prediction of charge-carrier dynamics in macroscopic devices, e.g., for photovoltaics.
The bond dissociation of a carbon-monoxide-releasing molecule in aqueous solution was studied in Chapter 5 as a prototype reaction for the photo-triggered breaking of a bond. It was shown that upon excitation only one carbon-monoxide ligand of the tricarbonyl complex is dissociated. A fraction of the photolyzed molecules restore the intact initial complex by geminate recombination within the temporal resolution of the experiment. However, the recombination could be detected by the hot ground-state infrared absorption of the complex. The detectable dicarbonyl formed upon CO release distributes excess energy from the absorbed photon into low-frequency modes which result in broadened absorption bands like for the recombined tricarbonyl. The free coordination site in the ligand sphere is filled with a solvent water molecule. Despite numerous studies of metal carbonyls studied in alkaneous solutions, the elucidation of the dynamics of a CORM in aqueous solution added another important detail to the photochemistry of this class of compounds. Experiments employing a second ultraviolet pump pulse did not trigger further CO dissociation and hence no formation of a monocarbonyl species; this might either be due to a different release mechanism without a further photochemical step or a strong spectral shift of the dicarbonyl’s absorption. Both reasons could explain why degenerate pump–repump–probe spectroscopy is inefficient. However, further experiments with ultraviolet probe pulses could substantiate whether the intermediate dicarbonyl reacts further photochemically or not. Apart from the model-system character of the CORM for bond dissociation, the study could determine exactly how many CO ligands are initially photolyzed off. Detailed knowledge of the release mechanism will affect the previous use and application as well as the further development of CORMs as therapeutic prodrugs to deliver high local concentrations of CO in cancerous or pathological tissue. Hence, the study of two-photon absorption properties which are important for in vivo applications of CORMs should be the main focus in further spectroscopic experiments.
In Chapter 6, both abovementioned molecular phenomena—electron transfer and bond dissociation—were studied in combination. The photochemistry of a tetrazolium salt was studied in detail in a variety of different solvents. Being a relatively small molecule, the studied tetrazolium cation shows a multifaceted photochemistry and is therefore a textbook example for the combination of ultrafast molecular phenomena studied in different environments. Within femtoseconds, the tetrazolium ring is opened. The biradicalic species is then reduced via uptake of an electron from the solvent. The formation of the ring-open formazan photoproduct from this point of the reaction sequence on was excluded by experiments with acidic pH value of the solution. The ring-open radical is stabilized by ring-closure. The resulting tetrazolinyl radical was already observed in experiments with microsecond time resolution. However, its formation was observed in real time for the first time in this study. Irradiation of a tetrazoliumsalt solution yields different photoproduct distributions depending on the solvent. However, it was shown that all photoproducts have a tetrazolinyl radical as a common precursor on an ultrafast time scale. In combination with studies from the literature, the complete photochemical conversion of a tetrazolium salt was clarified in this study. Apart from the prototype character of the reaction sequence, the reaction mechanism will have impact on research associated with life science where tetrazolium assays are used on a daily basis without taking into account of photochemical conversion of the indicating tetrazolium ion and its photochemically formed reactive intermediates. On the basis of the tetrazolium-ion photochemistry, the rich photochemistry of the formazan photoproduct, including structural rearrangements and subsequent reformation of the tetrazolium ion, might be the subject of future studies.
This thesis shows a method advancement and application of transient absorption spectroscopy to exemplary molecular model systems. The insights into each respective field did not only enlighten singular aspects, but have to be seen in a much larger context. Understanding complex photoinduced processes bottom-up by learning about their constituting steps—microscopically and on an ultrafast time scale—is an ideal method to approach understanding and prediction of phenomena in large molecular systems like biological or artificial architectures as for example used in photosynthetic light-harvesting and photovoltaics.
In the experiments presented in this work, third-order, time-resolved spectroscopy was applied to the disentanglement of nuclear and electronic degrees of freedom in polyatomic molecules. The motivation for approaching this problem was given by the decisive role that the coupling of nuclear and electronic dynamics plays in the mechanism of photochemical reactions and photobiological processes. In order to approach this complex problem, different strategies within the framework of time-resolved, four-wave mixing spectroscopy were developed that allowed for the dynamic as well as the energetic aspects of vibronic coupling in non-radiative transitions of polyatomic molecules to be addressed. This was achieved by utilizing the influence of optical as well as Raman resonances on four-wave mixing processes. These resonance effects on third-order, optical processes allow for a high selectivity to be attained with respect to the interrogation of specific aspects of molecular dynamics. The development of different strategies within the framework of time-resolved, four-wave mixing spectroscopy for addressing the problem of vibronic coupling began with the experiments on gaseous iodine. This simple, well investigated molecular system was chosen in order to unambiguously characterize the effect of Raman resonances on four-wave mixing processes. A time-resolved degenerative four-wave mixing (DFWM) experiment was carried out on gaseous iodine that allowed for the dynamics of coherent Stokes Raman scattering (CSRS) as well as a coherent anti-Stokes Raman scattering (CARS) to be observed parallel to the dynamics of a DFWM process at different spectral positions of the FWM signal. Here, the state-selectivity of these different FWM processes manifests itself in the vibrational wave packet dynamics on different electronic potentials of iodine. It could be shown that Raman resonances determine the selectivity with which these FWM processes prepare and interrogate nuclear dynamics in different electronic states. With the insight gained into the relevance of Raman resonant processes in FWM spectroscopy, an experimental scheme was devised that utilizes this effect to selectively interrogate the dynamics of a specific vibrational mode within a polyatomic molecule during a radiationless electronic transition. Here, a CARS process was employed to selectively probe specific vibrational modes of a molecular system by variably tuning the energy difference between the lasers involved in the CARS process to be in Raman resonance with the vibrational energy spacing of a particular vibrational mode. Using this aspect of a tunable resonance enhancement within a CARS scheme, this optical process was incorporated in a time-resolved pump-probe experiment as a mode-selective probe mechanism. This type of experimental configuration, that employs four pulsed laser fields, was classified as a pump-CARS scheme. Here, a laser pulse independent of the CARS process initiates the molecular dynamics that are interrogated selectively with respect to the vibrational mode of the system through the simultaneous interaction of the three pulsed fields involved in the CARS process. Time-resolution on a femtosecond timescale is achieved by introducing a time delay between the independent pump laser and the laser pulses of the CARS process. The experimental configuration of a pump-CARS scheme was applied to the study of the nuclear dynamics involved in the radiationless electronic transition between the first excited singlet state (S1) and the electronic ground state (S0) of all-trans-b-carotene. The mode-selective CARS probe allowed for the characteristic timescale with which specific vibrational modes are repopulated in the S0 state to be determined. From the varying repopulation times of specific vibrational modes, a mechanism with which the full set of vibrational states of the S0 potential are repopulated subsequent to the internal conversion process could be postulated. Most importantly, the form of nuclear motion that primarily funnels the population between the two electronic states could be identified as the C=C symmetric symmetric stretch mode in the polyene backbone of b-carotene. With this, the reaction coordinate of this radiationless electronic transition could be identified. The experiment shows, that the CARS probe is capable of determining the nuclear motion coupled to a radiationless electronic transition in complex polyatomic systems. The S1/S0 internal conversion process in b-carotene was further investigated with time-resolved transient gratings. Here, the energetic aspects of a non-adiabatic transition was addressed by determining the influence of the vibrational energy on the rate of this internal conversion. In order to compare the rate of internal conversion taking place out of vibrational ground state modes versus this transition initiating out of vibrationally hot modes, the strategy of shifting the probe mechanism in the transient grating scheme to spectral positions within and out of the red flank of the S1 absorption profile was pursued. The interrogation of different vibrational states was verified by determining the degree of vibrational cooling, taking place parallel to the internal conversion process. With this strategy, it could be shown that vibrationally hot states contribute to the internal conversion with a higher rate than vibrational ground state modes. In summary, different third-order, optical processes in the framework of time-resolved FWM were applied to the study of non-adiabatic dynamics in polyatomic molecules. By utilizing the effect of optical as well as Raman resonances on different FWM processes, it could be shown that third-order, time-resolved spectroscopy is a powerful tool for gaining insight into complex molecular dynamics such as vibronic coupling. The experiments presented in this work showed that the CARS process, as a mode-selective probe in time-resolved experiments, is capable of disentangling nuclear and electronic dynamics.
The controlled shaping of ultrashort laser pulses is a powerful technology and applied in many laser laboratories today. Most of the used pulse shapers are only able to produce linearly polarized pulses shaped in amplitude and phase. Some devices are also capable of producing limited time-varying polarization profiles, but they are not able to control the amplitude. However, for some state-of-the-art non-linear time-resolved methods, such as polarization-enhanced two-dimensional spectroscopy, the possibility of controlling the amplitude and the polarization simultaneously is desirable.
Over the last years, different concepts have been developed to overcome these restrictions and to manipulate the complete vector-field of an ultrashort laser pulse with independent control over all four degrees of freedom - phase, amplitude, orientation, and ellipticity. The aim of this work was to build such a vector-field shaper. While the basic concept used for our setup is based on previous designs reported in the literature, the goal was to develop an optimized optical design that minimizes artifacts, allowing for the generation of predefined polarization pulse sequences with the highest achievable accuracy.
In Chapter 3, different approaches reported in the literature for extended and unrestricted vector-field control were examined and compared in detail. Based on this analysis, we decided to follow the approach of modulating the spectral phase and amplitude of two perpendicularly polarized pulses independently from each other in two arms of an interferometer and recombining them to a single laser pulse to gain control over the complete vector field.
As described in Chapter 4, the setup consists of three functional groups: i) an optical component to generate and recombine the two polarized beams, ii) a 4f setup, and iii) a refracting telescope to direct the two beams under two different angles of incidence onto the grating of the 4f setup in a common-path geometry. This geometry was chosen to overcome potential phase instabilities of an interferometric vector-field shaper. Manipulating the two perpendicularly polarized pulses simultaneously within one 4f setup and using adjacent pixel groups of the same liquid-crystal spatial light modulator (LC SLM) for the two polarizations has the advantages that only a single dual-layer LC SLM is required and that a robust and compact setup was achieved. The shaping capabilities of the presented design were optimized by finding the best parameters for the setup through numerical calculations to adjust the frequency distributions for a broad spectrum of 740 – 880 nm. Instead of using a Wollaston prism as in previous designs, a thin-film polarizer (TFP) is utilized to generate and recombine the two orthogonally polarized beams. Artifacts such as angular dispersion and phase distortions along the beam profile which arise when a Wollaston prism is used were discussed. Furthermore, it was shown by ray-tracing simulations that in combination with a telescope and the 4f setup, a significant deformation of the beam profile would be present when using a Wollaston prism since a separation of the incoming and outgoing beam in height is needed. The ray-tracing simulations also showed that most optical aberrations of the setup are canceled out when the incoming and outgoing beams propagate in the exact same plane by inverting the beam paths. This was realized by employing a TFP in the so-called crossed-polarizer arrangement which has also the advantage that the polarization-dependent efficiencies of the TFP and the other optics are automatically compensated and that a high extinction ratio in the order of 15000:1 is reached. Chromatic aberrations are, however, not compensated by the crossed-polarizer arrangement. The ray-tracing simulations confirmed that these chromatic aberrations are mainly caused by the telescope and not by the cylindrical lens of the 4f setup. Nevertheless, in the experimentally used wavelength range of 780 – 816 nm, only minor distortions of the beam profile were observed, which were thus considered to be negligible in the presented setup.
The software implementation of the pulse shaper was reviewed in Chapter 5 of this thesis. In order to perform various experiments, five different parameterizations, accounting for the extended shaping capabilities of a vector-field shaper, were developed. The Pixel Basis, the Spectral Basis, and the Spectral Taylor Basis can generally be used in combination with an optimization algorithm and are therefore well suited for quantum control experiments. For multidimensional spectroscopy, the Polarized Four-Pulse Basis was established. With this parameterization pulse sequences with up to four subpulses can be created. The polarization state of each subpulse can be specified and the relative intensity, phase, and temporal delay between consecutive subpulses can be controlled. In addition, different software programs were introduced in Chapter 5 which are required to perform the experiments conducted in this work.
The experimental results were presented in Chapter 6. The frequency distribution across the LC SLM was measured proving that the optimal frequency distribution was realized experimentally. Furthermore, the excellent performance of the TFP was verified. In general, satellite pulses are emitted from the TFP due to multiple internal reflections. Various measurements demonstrated that these pulses are temporally separated by at least 4.05 ps from the main pulse and that they have vanishing intensity. The phase stability between the two arms of the presented common-path setup σ = 28.3 mrad (λ/222) over 60 minutes. To further improve this stability over very long measurement times, an on-the-fly phase reduction and stabilization (OPRAS) routine utilizing the pulse shaper itself was developed. This routine automatically produces a compressed pulse with a minimized relative phase between the two polarization components. A phase stability of σ = 31.9 mrad (λ/197) over nearly 24 hours was measured by employing OPRAS. Various pulse sequences exceeding the capabilities of conventional pulse shapers were generated and characterized. The experimental results proved that shaped pulses with arbitrary phase, amplitude, and polarization states can be created. In all cases very high agreement between the target parameters and the experimental data was achieved.
For the future use of the setup also possible modifications were suggested. These are not strictly required, but all of them could further improve the performance and flexibility of the setup. Firstly, it was illustrated how a “dual-output” of the setup can be realized. With this modification it would be possible to use the main intensity of the shaped pulse for an experiment while using a small fraction to characterize the pulse or to perform OPRAS simultaneously. Secondly, the basic idea of replacing the telescope by focusing mirrors in order to eliminate the chromatic aberrations was presented. Regarding the different parameterizations for vector-field shaping, some modifications increasing the flexibility of the implemented bases and the realization of a von Neumann Basis for the presented setup were proposed. In future experiments, the vector-field shaper will be used in conjunction with a photoemission electron microscope (PEEM). This approach combines the temporal resolution provided by ultrashort laser pulses with the high spatial resolution gained by electron microscopy in order to perform two-dimensional spectroscopy and coherent control on nanostructures with polarization-shaped femtosecond laser pulses. In combination with other chiral-sensitive experimental setups implemented earlier in our group, the vector-field shaper opens up new perspectives for chiral femtochemistry and chiral control.
The designed vector-field shaper meets all requirements to generate high-precision polarization-shaped multipulse sequences. These can be used to perform numerous polarization-sensitive experiments. Employing the OPRAS routine, a quasi-infinitely long phase stability is achieved and complex and elaborated long-term measurements can be carried out. The fact that OPRAS demands no additional hardware and that only a single dual-layer LC SLM and inexpensive optics are required allows the building of a vector-field shaper at comparatively low costs. We hope that with the detailed insights into the optical design process as well as into the software implementation given in this thesis, vector-field shaping will become a standard technique just as conventional pulse shaping in the upcoming years.
Ziel der vorliegenden Arbeit war die Funktionalisierung von Titanoberflächen mit dem Glycosaminoglycan Heparin, um bei Kontakt des Werkstoffs mit Blut die Gerinnungskaskade nicht auszulösen und das Material für Stents (Gefäßstützen) im arteriellen System einsetzbar zu machen. Für die Modifizierungen wurden als Modell der oxidierten Titanoberfläche sowohl oxidierte cp-Titanplättchen als auch TiO2-Pulver verwendet. Heparin kam zum Einsatz, da es sowohl die Hämostase (Blutgerinnung) als auch die Proliferation (Überwucherung) mit glatten Muskelzellen unterdrückt und somit eine Restenose (Wiederverengung) des in die verengte Arterie eingebrachten Stents verhindert. Die kovalente Immobilisierung des Wirkstoffs erfolgte über bifunktionale Spacer (Haftvermittlermoleküle). Spacer waren 3-(Trimethoxysilyl)-propylamin (APMS), N-(2-Aminoethyl)-3-aminopropyltrimethoxysilan (Diamino-APMS) und N1-[3-(Trimethoxysilyl)-propyl]diethylen¬triamin (Triamino-APMS). Der qualitative und quantitative Nachweis der Funktionalisierung von TiO2 mit Haftvermittler bzw. Heparin erfolgte durch schwingungsspektroskopische Methoden, komplexometrische Farbreaktionen sowie der Bestimmung des Zetapotentials im Elektrolytkontakt. Durch die Anbindung von APMS, Di- und Triamino-APMS stieg das Zetapotential von ca. -26 mV auf positive Werte zwischen +41 und +45 mV. Ein Absinken des Zetapotentials belegte die erfolgreiche Anbindung von Heparin (Werte zwischen -39 und -37 mV) an die verschiedenen Haftvermittler, ebenso wie das Vorhandensein der symmetrischen SO3-Valenzschwingung bei 1040 cm-1. Der quantitative Nachweis der immobilisierten Aminogruppen über die Ninhydrinreaktion ergab für die TiO2-Pulver Werte zwischen 17-20 NH2/nm2, wobei die dichteste Funktionalisierung mit APMS und die niedrigste mit Triamino-APMS erzielt werden konnte. Alle Werte lagen im Bereich von Multilayern, da ein Monolayer aus ca. 2 3 NH2/nm2 besteht. Die immobilisierte Menge an Heparin war bei Verwendung von APMS am größten (53.3±3.6 ng/cm2) und bei Triamino-APMS am geringsten (32.1±5.7 ng/cm2). Die biologische Wirksamkeit des gebundenen Heparins wurde über das chromogene Substrat ChromozymTH® bestimmt und verblieb bei Anbindung an den Spacer mit der größten Moleküllänge (Triamino-APMS) mit ca. 70% am wirksamsten. Neben der kovalenten Anbindung des Wirkstoffs an Spacer zielte diese Arbeit auf die Entwicklung von organisch modifizierten, porösen SiO2-Wirkstoffdepots (P-MA-PS; Poly-methacryl¬oxy¬propylpolysilsesquioxane) für Heparin ab, die sowohl als Volumenwerkstoffe als auch zur Modifikation von Titan(dioxid)oberflächen anwendbar wären. Die Matrices wurden ausgehend von MAS (Methacryl¬oxypropyl¬trimethoxysilan) über den Sol-Gel Prozeß anorganisch und anschließend über photochemische Polymerisation zusätzlich organisch vernetzt. Die Quantifizierung des Polymerisationsgrads erfolgte über die Signalintensität der methacrylischen C=C-Doppelbindung bei 1635 cm-1 durch Integration einer Gauß-Funktion. Über den Polymerisationsgrad der organischen Matrix zwischen 0-71% konnte die Freisetzungskinetik von Heparin je nach therapeutischer Anforderung eingestellt werden. Es konnte gezeigt werden, daß hohe Wirkstoff-Beladungen und niedrige Polymerisationsgrade mit einer schnelleren Freisetzung des Heparins korrelierten, die aufgrund der Endlichkeit des Wirkstoffs im Depot einer Kinetik 1. Ordnung unterlag. Die kumulativ freigesetzten Wirkstoffmengen verhielten sich hierbei proportional zur Wurzel aus der Freisetzungszeit, was dem Higuchi-Modell zur Wirkstofffreisetzung aus porösen Matrices mit einem rein Diffusions-kontrollierten Mechanismus entsprach. Die durch Hydrolyse bedingte Degradation der anorganischen Matrix, die UV-VIS-spektroskopisch bei λ = 220 nm gemessen wurde, folgte einer Kinetik pseudo-0. Ordnung. Da das freigesetzte Heparin seine biologische Wirksamkeit beibehielt, sind P-MA-PS Matrices interessant für klinische Anwendungen, wie z.B. für die Beschichtung von Gefäßstützen, die im Blutkontakt stehen.
The invention of laser pulse shapers allowed for various quantum control experiments, where a chemical reaction is guided by specifically tailored laser pulses. However, despite of the prominent role of the liquid phase in chemistry, no successful attempt for controlling the selectivity of a bond-fission reaction has yet been reported in this state of matter. Promising candidates for such an experiment are C$_{\infty\mathrm{v}}$-symmetric trihalide anions with two different chemical bonds like $\ce{I2Cl-}$, because these molecules notionally offer the most simplest selectivity-control scenario of breaking either the one or the other bond and they are expected to dissociate under ultraviolet (UV) irradiation like it is known for the most-studied trihalide $\ce{I3-}$.
In order to investigate in this thesis the possibility that the dissociation reaction of such trihalides branches into two different photofragments, the ultrafast photodissociation dynamics of $\ce{I3-}$, $\ce{Br3-}$, $\ce{IBr2-}$ and $\ce{ICl2-}$ (point group D$_{\infty\mathrm{h}}$) as well as of $\ce{I2Br-}$ and $\ce{I2Cl-}$ (point group C$_{\infty\mathrm{v}}$) in dichloromethane solution were measured with broadband transient absorption spectroscopy in magic-angle configuration. The identification of the reaction pathway(s) relies on vibrational wavepacket oscillations, which survive the dissociation process and therefore carry not only informations about the reactant trihalides but also about the fragment dihalides.
These characteristic vibrational wavenumbers were extracted from the measured transient absorption spectra by globally fitting the population dynamics together with the wavepacket dynamics. Until recently, such a combined model function was not available in the well-established fitting tool Glotaran. This made it inevitable to develop a custom implementation of the underlying variable-projection fitting algorithm, for which the computer-algebra software Mathematica was chosen. Mathematica's sophisticated built-in functions allow not only for a high flexibility in constructing arbitrary model functions, but also offer the possibility to automatically calculate the derivative(s) of a model function. This allows the fitting procedure to use the exact Jacobian matrix instead of approximating it with the finite difference method.
Against the expectation, only one of the two thinkable photodissociation channels was found for each of the investigated C$_{\infty\mathrm{v}}$ trihalides. Since the photofragments recombine, their absorption signal as well as the reactant ground state bleach recover. This happens in a biexponential manner, which in the case of $\ce{I3-}$ was interpreted by Ruhman and coworkers with the direct formation of a neutral dihalogen fragment $\ce{I2}$ beside the negatively charged dihalide fragment $\ce{I2-}$. In this thesis, such a direct reaction channel was not found and instead the fast component of the biexponential decay is explained with vibrational excess energy mediating the recombination-preceding electron transfer process $\ce{I2- + I -> I2 + I-}$, while the slow component is attributed to cooled-down fragments.
In addition to the trihalide experiments, the possibility of a magic-angle configuration for polarization-shaping control experiments was theoretically investigated in this thesis by deriving magic-angle conditions for the third-order electric-dipole response signal of arbitrarily polarized laser pulses. Furthermore, the subtleties of anisotropy signals violating the well-known range of \numrange{-0.2}{0.4} were studied.
Within this work, an additive and a subtractive QM/MM interface were implemented into CAST. The interactions between QM and MM system are described via electrostatic embedding. Link atoms are used to saturate dangling bonds originating from the separation of QM and MM system. Available energy evaluation methods to be combined include force fields (OPLSAA and AMBER), semi-empirical programs (Mopac and DFTB+), and quantum-chemical methods (from Gaussian, Orca, and Psi4). Both the additive and the subtractive interface can deal with periodic boundary conditions. The subtractive scheme was extended to enable QM/QM, three-layer, and multi-center calculations. Another feature only available within the subtractive interface is the microiteration procedure for local optimizations.
The novel QM/MM methods were applied to the investigation of the reaction path for the complex formation between rhodesain and K11777. Benchmark calculations show a very good agreement with results from Gaussian-ONIOM. When comparing the relative energies obtained with different options to a computation where the whole system was treated with the “QM method” DFTB3, the electrostatic embedding scheme with option “delM3” gives the best results. “delM3” means that atoms with up to three bonds distance to the QM region are ignored when creating the external charges. This is done in order to avoid a double counting of Coulomb interactions between QM and MM system. The embedding scheme for the inner system in a three-layer calculation, however, does not have a significant influence on the energies. The same is true for the choice of the coupling scheme: Whether the additive or the subtractive QM/MM interface is applied does not alter the results significantly. The choice of the QM region, though, proved to be an important factor. As can be seen from the comparison of two QM systems of different size, bigger is not always better here. Instead, one has to make sure not to separate important (polar) interactions by the QM/MM border.
After this benchmark study with singlepoint calculations, the various possibilities of CAST were used to approximate the solution of a remaining problem: The predicted reaction energy for the formation of the rhodesain-K11777 complex differs significantly depending on the starting point of the reaction path.
The reason for this is assumed to be an inadequate adjustment of the environment during the scans, which leads to a better stabilization of the starting structure in comparison to the final structure. The first approach to improve this adjustment was performing the relaxed scan with a bigger QM region instead of the minimal QM system used before. While the paths starting from the covalent complex do not change significantly, those starting from the non-covalent complex become more exothermic, leading to a higher similarity of the two paths. Nevertheless, the difference of the reaction energy is still around 15 kcal/mol, which is far from a perfect agreement. For this reason, Umbrella Samplings were run. Here, the adjustment of the environment is not done by local optimizations like in the scans, but by MD simulations. This has the advantage that the system can cross barriers and reach different local minima. The relative free energies obtained by Umbrella Samplings with suitable QM regions are nearly identical, independently of the starting point of the calculation. Thus, \(\Delta A\) evaluated by these computations can be assumed to reproduce the real energy change best. An MD simulation that was started from the transition state in order to mimic a “real-time” reaction indicates a very fast adjustment of the environment during the formation of the complex. This confirms that Umbrella Sampling is probably better suitable to describe the reaction path than a scan, where the environment can never move strong enough to leave the current local minimum.
Two thematic complexes were addressed within this work. One part is related to improvements and new implementations into the CAST program package. Thereby the main focus laid on the delivery of a tool which can be used to characterize complex reactions and their mechanisms. But also within the new force field (FF) method (SAPT-FF) within the CAST program, several improvements were made. The second topic is related to the description of dye molecules and their spectral properties. The main focus within these studies was set on the influence of the environment on these properties. In the first topic improvements of the local acting NEB (nudged elastic band) methods were included and the number of available methods was extended. The initial pathway generation was improved by implementing the IDPP (image dependent pair potential) method and a new method was implemented for describing temperature dependent pathways. Additionally, improvements have been made to the optimization routines (global NEB). As a second part the Pathopt (PO) method was considerably improved. In the beginning of the work the original PO idea was used. In this approach one starts with a global optimization on one n-1 dimensional hyperplane which divides the reaction into two sub-areas for obtaining guesses of TSs (transition states). These found TS guesses were used to optimize to the ”true” TS. Starting from the optimized ones a relaxation to the next connected minima is done. This idea has been automatically implemented and extended to several number of hyperplanes. In this manner a group of pathsegments is obtained which needs to be connected, but within this work it was realized that such a procedure might be not very efficient. Therefore, a new strategy was implemented which is founded on the same constrained global optimization scheme (MCM) for which the user defines the number of hyperplanes generated. The number of such generated hyperplanes should be large enough
134
to describe the space between the concerning reactants in a sufficient way. The found minima are directly used to built up the reaction pathway. For this purpose a RMSD (root mean square deviation) criterion is used to walk along ways of minimal change from one to another hyperplane. To prove the implementations various test calculations were carried out and extensions included to prove the capabilities of the new strategy. Related to these tests a new strategy for applying the move steps in MCM (Monte Carlo with minimization) was realized which is also related to the question of the coordinates representation. We were able to show that the hopping steps in MCM can be improved by applying Cartesian steps in combination of random dihedral moves with respect to the constraint. In this way it was possible to show that a large variety of systems can be treated. An additional chapter shows the improvements of the SAPT-FF implementation and related test cases. It was possible to treat benzene dimer and cluster systems of different sizes consistently also in accordance with high level ab initio based approaches. Furthermore, we showed that the SAPT-FF with the right parameters outperforms the standard AMOEBA implementation which is the basis of the SAPT-FF implementation. In the last three chapters deal with the description of perlyene-based dyes. In the first smaller chapter ground state chemistry description of macro cycles of PBI (perylene bisimide) derivatives were investigated. Therefore, AFM (atomic force microscopy) based pictures were explained within our study. The methods to explain aggregation behavior in dependency of the ring size were MD simulations and configuration studies. The last two chapters deal with opto-electronic or photo-physical properties of PBI and PTCDA (perylene-3,4,9,10-tetracarboxylic dianhydride). In detail, we investigated the role of the environment and the aggregate or crystal surrounding by applying different models. In that way implicit and explicit solvation models, the size of aggregates and vibration motions were used. In the case of PBI the recent work is found on preliminary studies related to my bachelor thesis and extends it. It was shown that the direct influence of a polarizable surrounding, as well as explicit inclusion of solvent molecules on the overall description of the excitations and nature of the excited states is weaker as one might expect. However the inclusion of intra-molecular degrees of freedom showed a stronger influence on the state characteristics and can induce a change of the order of states within the dimer picture. For the PTCDA molecule the main focus was set on the description of the absorption spectrum of crystalline thin films. Related to this older works exist which already gave a description and assignment of the absorption band, but are based on different approaches compared to the one used in this work. We used the supermolecule ansatz, whereas the environment and different aggregate sizes were investigated. Within the dimer based approach we were able to show that using continuum solvation (IEFPCM/COSMO) based description for the environment the relative order of states remains unchanged. Similar to the PBI calculations the influence of the vibrational motions /distortions is larger. The simulation of the crystal environment by using QM/MM (quantum mechanics/molecular mechanics) approaches delivered that an asymmetric charge distribution might induce a localization of the excitation and a stronger mixing of states. For obtaining further insights we go beyond the dimer picture and aggregates of different sizes were used, whereas the simulations up to the octadecamer mono- and even dual-layer stack were carried out. Within these calculations it was shown that the H-coupling is dominating over a weaker J-coupling between different stacks. Additionally the calculations based on DFT (density functional theory) and semi-empirics showed that the lowest state in terms of energy are mostly of Frenkel type, whereas the higher lying states are CT ones which mix with embedded Frenkel type states. The first band of the absorption spectrum was explained by inclusion of vibrational motions within the stacks which induce an intensity gain of the first excited state. This intensity was not explainable by using the undistorted stacks. Also relaxations at the crystal surface might play a role, but are experimentally not explainable.
In this thesis, we apply the information-theoretic approach in the context of quantum dynamics and wave packet motion: Information-theoretic measures are calculated from position and momentum densities, which are obtained from time-dependent quantum wave functions. The aim of this thesis is to benchmark, analyze and interpret these quantities and relate their features to the wave packet dynamics. Firstly, this is done for the harmonic oscillator (HO) with and without static disorder. In the unperturbed HO, the analytical study of coherent and squeezed states reveals time-dependent entropy expressions related to the localization of the wave function. In the disordered HO, entropies from classical and quantum dynamics are compared for short and long times. In the quantum case, imprints of wave packet revivals are found in the entropy. Then, the energy dependence of the entropy for very long times is discussed. Secondly, this is donefor correlated electron-nuclear motion. Here, entropies derived from the total, electronic and nuclear density, respectively, are calculated in position and momentum space for weak and strong adiabatic electronic coupling. The correlation between electron and nucleus is investigated using different correlation measures, where some of these functions are sensitive to the nodal structure of the wave function. An analytic ansatz to interpret the information-theoretical quantities is applied as well.
Infrared photodissociation spectroscopy of ionic hydrocarbons : microsolvation and protonation sites
(2007)
This work has presented a spectroscopic analysis of three types of hydrocarbon cations: two ionized aromatic hydrocarbons, two protonated aromatic hydrocarbons and the cation of a fundamental radical hydrocarbon. The experiments were centered on the proton stretch vibrations of mass-selected complexes of these systems and polar (H2O) and non polar (Ar, N2, CO2) ligands. The experiments have been done in a tandem mass spectrometer coupled with an electron impact ionization ion source; an OPO laser system was used as tunable IR light source. All the proposed dimer structures have been also modeled using quantum chemical calculations (QCC). These calculations have consistently been matched with the experimental results and have enabled clear identification of the spectral features observed. This has enabled the evaluation of thermochemical properties which could not be extracted directly from experiment. The experiments done on complexes of 1-Np+ and Im+ have allowed for the acidity of their various groups to be probed: the shifts in the frequency as well as the enhancement in the intensity of the OH and NH stretch vibrations resulting from the complexation have yielded dependences on both the species (L) and the number (n) of the ligands. OH bound 1-Np+···Ar has been detected for the first time, showing that the REMPI-IRPD method is severely limited with respect to the production of the most stable isomer of a given cationic complex. The detection of c-1-Np+···(N2)n corresponds to the first observation of c-1-Np+ complexes and enables thus direct comparison of both 1-Np+ rotamers. The shift of the NH vibration of Im+···N2(H) yielded the first experimental estimate for the PA of the imidazyl radical. It was also found that the most stable 1-Np+···Ar and Im+···Ar structures differ qualitatively from that of the corresponding neutral dimers (H-bound vs pi-bound), emphasizing the large impact of ionization on the interaction potential and the preferred recognition motif between acidic aromatic molecules (A) and nonpolar ligands. The IRPD spectra of 1-Np+···Ln and Im+···Ln yielded spectroscopic information about the CH, NH and OH stretch vibrations of bare 1-Np+ and Im+. The dependence of the shifts in the frequency of the OH and NH stretch vibrations allows for creating microsolvation models. The spectroscopic results obtained on size-selected 1-NpH+···Ln show that, in the output of the presently used ion source, three classes of 1-NpH+ isomers can be identified: oxonium ions (1-Np protonated at the O atom); carbenium ions obtained by protonation in the para and ortho positions with respect to the OH functional group; carbenium ions obtained by the addition of a proton to well-defined sites on the second naphthalene ring. The spectral identification of these three classes of protonation sites is supported by their different photofragmentation patterns. It was demonstrated that the spectroscopic monitoring of the microsolvation of ImH+ in Ar and N2 together with the QCCs paint a very detailed picture of the microsolvation process, evidencing clear differences between the microsolvation models as function of the PA of the ligands. Important differences have also been identified between the various binding sites, enabling the creation of a clear scale of priorities for occupation of the binding sites during microsolvation. The application of IRPD to the study of microhydrated ImH+ provided for the first time direct spectroscopic information on the properties of the N-H bonds of this biomolecular building block under controlled microhydration. It was demonstrated that, as protonation enhances the acidity of the NH groups, the ability for proton conductivity of ImH+ increases. A very important result is derived from the IRPD spectroscopy of C2H5+···L (L = Ar, N2, CO2, CH4) dimers. The equilibrium geometry of the C2H5+ has long been debated. Now, IRPD spectra were recorded over the range of the CH stretch fundamentals (covering possible sp3 and sp2 hybridization of C). Depending on the ligand species, the spectra are found to be dominated by the fingerprint of two largely different dimer geometries. Using the experimental C2H5+···Ar spectrum and the corresponding QCCs, the structure of the (weakly perturbed) C2H5+ was found to be the nonclassical one, with one proton straddling across the C=C bond of the H2C=CH2. On the other hand, ligands like N2 and CH4 are strongly influencing the geometry, as seen in the spectral signatures of the C2H5+···N2 and C2H5+···CH4, which correspond to the classical [H2CCH3]+. It was thus demonstrated that while the nonclassical C2H5+ is the global minimum on the PES of the free [C2,H5]+, the structure of the C2H5+ can be strongly influenced by the chemical properties of the environment.
Investigation of Nanostructure-Induced Localized Light Phenomena Using Ultrafast Laser Spectroscopy
(2017)
In recent years, the interaction of light with subwavelength structures, i.e., structures that are smaller than the optical wavelength, became more and more interesting to scientific research, since it provides the opportunity to manipulate light-induced dynamics below the optical diffraction limit. Specifically designed nanomaterials can be utilized to tailor the temporal evolution of electromagnetic fields at the nanoscale. For the investigation of strongly localized processes, it is essential to resolve both their spatial and their temporal behavior. The aim of this thesis was to study and/or control the temporal evolution of three nanostructure-induced localized light phenomena by using ultrafast laser spectroscopy with high spatial resolution.
In Chapter 4, the absorption of near-infrared light in thin-film a-Si:H solar cells was investigated. Using nanotextured instead of smooth interfaces for such devices leads to an increase of absorption from < 20% to more than 50% in the near-infrared regime. Time-resolved experiments with femtosecond laser pulses were performed to clarify the reason for this enhancement. The coherent backscattered radiation from nanotextured solar cell devices was measured as a function of the sample position and evaluated via spectral interferometry. Spatially varying resonance peaks in the recorded spectra indicated the formation of localized photonic modes within the nanotextured absorber layers. In order to identify the modes separately from each other, coherent two-dimensional (2D) nanoscopy was utilized, providing a high spatial resolution < 40 nm. In a nanoscopy measurement on a modified device with an exposed nanotextured a-Si:H absorber layer, hot-spot electron emission was observed and confirmed the presence of localized modes. Fitting the local 2D nanospectra at the hot-spot positions enabled the determination of the resonance frequencies and coherence lifetimes of the modes. The obtained lifetime values varied between 50 fs and 130 fs. Using a thermionic emission model allowed the calculation of the locally absorbed energy density and, with this, an estimation of the localization length of the photonic modes (≈1 μm). The localization could be classified by means of the estimated localization length and additional data evaluation of the backscattered spectra as strong localization ─ the so-called Anderson localization.
Based on the experimental results, it was concluded that the enhanced absorption of near-infrared light in thin-film silicon solar cells with nanotextured interfaces is caused by the formation of strongly localized photonic modes within the disordered absorber layers. The incoming near-infrared light is trapped in these long-living modes until absorption occurs.
In Chapter 5, a novel hybridized plasmonic device was introduced and investigated in both theory and experiment. It consists of two widely separated whispering gallery mode (WGM) nanoantennas located in an elliptical plasmonic cavity. The goal was to realize a periodic long-range energy transfer between the nanoantennas. In finite-difference time-domain (FDTD) simulations, the device was first optimized with respect to strong coupling between the localized antenna modes and the spatially-extended cavity mode. The geometrical parameters of the antennas and the cavity were adjusted separately so that the m="0" antenna mode and the cavity mode were resonant at λ="800 nm" . A high spatial overlap of the modes was achieved by positioning the two antennas in the focal spots of the cavity, leading to a distance between the antenna centers of more than twice the resonant wavelength of the modes. The spectral response of the optimized device revealed an energy splitting of the antenna and the cavity mode into three separated hybridized eigenmodes within an energy range of about 90 meV due to strong coupling. It could be well reproduced by a simple model of three coupled Lorentzian oscillators. In the time domain, an oscillatory energy transfer between both antennas with a period of 86 fs and an energy transfer efficiency of about 7% was observed for single-pulse excitation. For the experiments, devices with cavities and antennas of varying size were fabricated by means of focused-ion-beam (FIB) milling. Time-resolved correlation measurements were performed with high spatial and temporal resolution by using sequences of two femtosecond laser pulses for excitation and photoemission electron microscopy (PEEM) for detection. Local correlation traces at antennas in resonant devices, i.e., devices with enhanced electron emission at both antenna positions, were investigated and reconstructed by means of the coupled-oscillator model. The corresponding spectral response revealed separated peaks, confirming the formation of hybridized eigenmodes due to strong coupling. In a subsequent simulation for single-pulse excitation, one back-and-forth energy transfer between both antennas with an energy transfer efficiency of about 10% was observed.
Based on the theoretical and experimental results, it was demonstrated that in the presented plasmonic device a periodic long-range energy transfer between the two nanoantennas is possible. Furthermore, the coupled-oscillator model enables one to study in depth how specific device properties impact the temporal electric-field dynamics within the device. This can be exploited to further optimize energy transfer efficiency of the device. Future applications are envisioned in ultrafast plasmonic nanocircuitry. Moreover, the presented device can be employed to realize efficient SPP-mediated strong coupling between widely separated quantum emitters.
In Chapter 6, it was investigated in theory how the local optical chirality enhancement in the near field of plasmonic nanostructures can be optimized by tuning the far-field polarization of the incident light. An analytic expression was derived that enables the calculation of the optimal far-field polarizations, i.e., the two far-field polarizations which lead to the highest positive and negative local optical chirality, for any given nanostructure geometry. The two optimal far-field polarizations depend on the local optical response of the respective nanostructure and thus are functions of both the frequency ω and the position r. Their ellipticities differ only in their sign, i.e., in their direction of rotation in the time domain, and the angle between their orientations, i.e., the angle between the principal axes of their ellipses, is ±π/"2" . The handedness of optimal local optical chirality can be switched by switching between the optimal far-field polarizations. In numerical simulations, it was exemplarily shown for two specific nanostructure assemblies that the optimal local optical chirality can significantly exceed the optical chirality values of circularly polarized light in free space ─ the highest possible values in free space. The corresponding optimal far-field polarizations were different from linear and circular and varied with frequency. Using femtosecond polarization pulse shaping provides the opportunity to coherently control local optical chirality over a continuous frequency range. Furthermore, symmetry properties of nanostructures can be exploited to determine which far-field polarization is optimal.
The theoretical findings can have impact on future experimental studies about local optical chirality enhancement. Tuning the far-field polarization of the incident light offers a promising tool to enhance chirally specific interactions of local electromagnetic fields with molecular and other quantum systems in the vicinity of plasmonic nanostructures. The presented approach can be utilized for applications in chiral sensing of adsorbed molecules, time-resolved chirality-sensitive spectroscopy, and chiral quantum control.
In conclusion, each of the localized light phenomena that were investigated in this thesis ─ the enhanced local absorption of near-infrared light due to the formation of localized photonic modes, the periodic long-range energy transfer between two nanoantennas within an elliptical plasmonic cavity, and the optimization of local optical chirality enhancement by tuning the far-field polarization of the incident light ─ can open up new perspectives for a variety of future applications.
.
Bei Verbrennungsprozessen im Otto-Motor, beim Raffinationsprozess in Erdölraffinerien, im interstellaren Raum oder in der Chemie der Erdatmosphäre spielen Moleküle, wie sie in dieser Arbeit untersucht wurden, eine wichtige Rolle. Allerdings stellt es eine große Herausforderung dar, solch reaktive Substanzen zu erzeugen und zu handhaben. Um das Ethyl-Radikal, ein wichtiges Intermediat z.B. in der Erzeugung von Ethylen, zu untersuchen, wurde eine bestehende Apparatur modifiziert. Diese ermöglicht es, die Geschwindigkeitsverteilung der Fragmente (Ionen oder Elektronen) zweidimensional aufzuzeichnen, die nach der Anregung mittels Laserlicht durch Photodissoziation entstehen. Diese velocity-map imaging Apparatur wurde in einem ersten Schritt mittels der Photodissoziation von Pyrrol bei 240 nm kalibriert. Cycloheptatrien konnte erfolgreich auf seine Photodissoziation untersucht werden, was als Test des VMI-Experiment genutzt wurde. Die gewonnenen Ergebnisse stimmten mit Resultaten überein, welche durch Doppler-Fragmentspektroskopie in dieser und früheren Arbeiten gewonnen wurden. Zwischen 11 und 13 % der Überschussenergie gehen dabei in die Translation des H-Atoms. • Das Ethyl-Radikal zeigte, als das erste mit unserer VMI-Apparatur untersuchte Radikal, eine interessante Photodissoziation: Wird es bei 250 nm angeregt, ergeben sich zwei Dissoziationskanäle, wobei ein bekannter Kanal nach schneller interner Konversion in den Grundzustand Fragmente mit geringer Translationsenergie erzeugt. Der zweite Kanal zeigt anisotropes Verhalten und erzeugt Wasserstoffatome mit hoher Translationsenergie, die mehr als die Hälfte der Überschussenergie abführen. Die Erklärung dieses Prozesses erweist sich schwierig in Anbetracht von durchgeführten Isotopenmarkierungsexperimenten sowie der beobachteten Ratenkonstanten für die Photodissoziation. Eine Interaktion von Valenz- und Rydbergzuständen im Ethyl-Radikal könnte eine Erklärung darstellen. In Zukunft kann beim VMI-Experiment in Würzburg versucht werden, die Auflösung weiter zu verbessern. Dabei ergäben sich im Idealfall zwei scharfe Ringe der H-Atome durch die Spin-Bahn-Aufspaltung von Brom, welche eine sehr genaue Kalibrierung ermöglichen. Neben den Ergebnissen auf dem Gebiet der Photodissoziation, die mit der VMI-Apparatur erzielt wurden, konnten mittels Synchrotronstrahlung und Aufzeichnen der Photoelektronen mittels VMI und der TPEPICO-Technik die folgenden Ergebnisse erhalten werden: • Von Propargylen, einem von drei C3H2 Isomeren, konnte die adiabatische Ionisierungsenergie (IEad) mit 8.99 eV bestimmt werden. Der Vorläufer Diazopropin, eine sehr instabile Substanz, wurde dazu synthetisiert und mit Synchrotronlicht untersucht. Allerdings war es nicht möglich, die Schwingungen im Kation oder die dissoziative Photoionisation (DPI) des Carbens zu untersuchen, da Diazopropin seinerseits bereits bei Energien von 9 eV durch DPI zerfällt. Allerdings konnte ein Peak im TPES des zyklischen Isomers aus einer früheren Messung eindeutig dem Propargylen zugeordnet werden. Ein Ausweg die DPI zu umgehen stellt die Verwendung eines anderen Vorläufers dar. Beispielsweise wurde dazu Propargylchlorid getestet, welches aber nicht das Propargylen erzeugt, sondern das zyklische Isomer Cyclopropenyliden. Daneben können durch ein Doppel-Imaging Experiment, bei dem die Ionen genauso wie die Elektronen mit einem bildgebenden Detektor aufgezeichnet werden, Ionen mit kinetischer Energie aus DPI von Ionen aus der Ionisation ohne kinetischer Energie unterschieden werden. • Von den substituierten Methyl-Radikalen Brommethyl sowie Cyanomethyl konnte die IEad (8.62 bzw. 10.28 eV) und vom Brommethyl die DPI (AE0K = 13.95 eV) bestimmt werden. Daraus konnte der Einfluss der Substituenten auf die IEad im Vergleich zum Methyl-Radikal (IE = 9.84 eV) gezeigt werden. Das zeigt, dass der Brom-Substituent das Kation, der Cyano-Rest dagegen das Radikal stabilisiert. Ebenso konnten aus den Ergebnissen beim Brommethyl thermodynamische Daten wie die Standardbildungsenthalpie des Radikals (ΔH0f= 174.5 kJ/mol) oder Bindungsenergien gewonnen werden. Letztere betragen 334 kJ/mol für die C-Br Bindung im Brommethyl-Radikal sowie 505 kJ/mol im Kation. • Das Fulvenallen (C7H6) wurde aus Phthalid durch Pyrolyse erzeugt und dessen IEad mit 8.22 eV bestimmt. Schwingungen konnten im Kation aufgelöst und zugeordnet werden. Außerdem konnte erstmals die IEad des Fulvenallenyl-Radikals (C7H5) mit 8.19 eV festgelegt werden. Im Vergleich zu früheren Messungen zeigte sich, dass aus Toluol in der Pyrolyse ebenfalls die beiden C7H5/C7H6 Isomere entstehen. Um verschiedene C7H5/C7H6 Isomere in einem Verbrennungsprozess zu unterscheiden, wäre es vorteilhaft, experimentell bestimmte Ionisierungsenergien von anderen Isomeren zu kennen.
Reactive hydrocarbon species are important in a multitude of different scientific areas. In this thesis, the vibrational spectra of hydrocarbon radicals, biradicals and their reaction product have been studied in a gas-phase environment. The specific molecules investigated here, are of particular importance in the field of combustion and astrochemistry. They were produced from suitable precursors in a pyrolytically heated micro-reactor and subsequently seeded in an appropriate carrier gas. As methodology, IR/UV ion dip spectroscopy has been utilized, which delivers massselected gas-phase IR spectra of all ionizable species detectable in the molecular beam. These, with the help of DFT calculations, allow for determination of the fingerprint IR spectra, identification of mass carriers and formulation of potential reaction mechanisms. All studies have been conducted in collaboration with the group of Prof. Dr. Anouk M. Rjis and the necessary potent IR radiation has been provided by the free-electron laser FELIX. Thus, the IR/UV measurements have been executed at the FELIX Laboratory of the Radboud University in Nijmegen. The first study presented in this thesis is the investigation of ortho-benzyne in Chapter 3.1. This molecule is of particular interest due to its uncommon electronic structure and its role in high-temperature reactions. Although, the infrared spectrum of o-C6H4 was not accessible, a number of reaction products were identified via their fingerprint spectra. Masses in the range from 78 - 228 were assigned to their respective carrier. The identified species include typical PAHs like naphthalene, phenanthrene, up to triphenylene. The identified masses further suggest a PAH growth heavily influenced by diradical 1,4-cycloaddition followed by fragmentation, as well as by classical HACA- and PAC-like mechanisms. These results were augmented by threshold photoionization measurements from Engelbert Reusch, who identified lighter reaction products, which have insufficient IR absorption or unsuitable ionization characteristics to be identified in the IR/UV experiment. An interesting observation is the identification of m/z = 152. This carrier has been assigned differently by the IR and TPES experiments. Whereas the IR spectrum clearly identifies the species as 2-ethynylnaphthalene, the TPES evidently is in great agreement with biphenylene. This is a good example how different experimental methodologies can benefit from each other to gain a deeper insight into the actual science of a particular system. Probably, the prime example for an aromatically resonance stabilized radical is benzyl. This radical is of high importance for many combustion studies, as it represents the primary high-temperature decomposition product of toluene. The goal of the study was the identification of the benzyl self reaction products and the results are discussed in Section 3.2. The radical was pyrolytically produced by its respective nitrite precursor. The mass spectrum showed that the benzyl self reaction formed two products with C11 and three with C14 constitution. All mass peaks were evenly spaced by two mass units, respectively, which suggests a close relation in formation. Indeed, the C11 products were identified as diphenylmethane and fluorene, which are simply connected via cyclization. The heaviest product was identified as phenanthrene, which is formed via the cyclization of bibenzyl to 9,10-dihydrophenanthrene and subsequent elimination of hydrogen. This result was quiet interesting as the intermediate of this reaction was often assumed to be stilbene, which was not observed in the study. Hence, the reaction seems to undergo cyclization first before phenanthrene is finally formed via hydrogen elimination. Expanding the molecular frame of benzyl by an additional methyl group leads to the xylyl radicals and its decomposition product the xylylenes. Also important in combustion research, xylyl radicals represent the preferred decomposition products of xylene, a frequently used anti-knock agent in modern gasoline blends. After further hydrogen elimination the xylyl radicals can then form their respective xylylenes. The results of the xylyl experiments are discussed in Section 3.3. Here the gas-phase vibrational spectrum in the fingerprint region for all three isomers has been recorded for the first time in isolation. Although, all isomers have a very similar structure and symmetry, and consequently similar vibrational bands, the resolution of the experimental data was exceedingly sufficient for a clear assignment. Additionally, the dimerization products of meta- and para-xylyl could also be identified. A similar approach was taken to determine the fingerprint spectra for the xylylenes. Here, only para-xylylene could be unambiguously identified as the carrier of mass 104. For both ortho- and meta-xylylene precursors, only isomerization products were observed as the carriers of mass 104; benzocyclobutene and styrene, respectively. A possible explanation is elaborated upon in the troubleshooting Sec- tion 3.4.3.5. In the final experimental section a study on the decomposition of phthalide is presented. The objective of this experiment was mainly focused around the formation of C7 species, particularly the fulvenallenyl radical C7H5. In fact, the first experimental fingerprint spectrum of isolated C7H5 in the gas-phase was measured and is displayed in Fig. 3.45. Furthermore, the experiment demonstrates that the pyrolysis products of phthalide are excellent soot precursors, as many heavier reaction products have been identified. These include typical PAH species like naphthalene and phenanthrene as well as their methylated isomers. A large number of molecules with terminal ethynyl moieties indicate a strong influence of HACA growth in the experimental environment. However, many formation pathways of products have been discussed, which are formed involving experiment specific species, like C5H5 and C7H5, and often include expansion steps from 5- to 6-membered rings.
Zur Charakterisierung der Wechselwirkungen zwischen organischen Dispergiermitteln und nanoskaligen Oberflächen stellen Komplexe aus Kohlenstoffnanoröhren und (Bio-)Polymeren aufgrund der großen Oberfläche der Nanoröhren und der kommerziellen Verfügbarkeit fluoreszenzmarkierter DNA-Oligomere unterschiedlicher Länge sowie intrinsisch fluoreszierender Polymere ein vielversprechendes Modellsystem dar. Im Rahmen der vorliegenden Dissertation wurden verschiedene Methoden evaluiert, um die Stabilität derartiger Komplexe zu untersuchen und dadurch Rückschlüsse auf das Adsorptionsverhalten der (Bio-)Polymere zu ziehen. Dabei konnte gezeigt werden, dass das publizierte helikale Adsorptionsmodell der DNA auf Kohlenstoffnanoröhren die Resultate der durchgeführten Experimente nur unzureichend beschreiben kann und stattdessen andere Adsorptionskonformationen in Erwägung gezogen werden müssen.
Unter dem Gesichtspunkt kohärenter Wellenpaketdynamik werden in dieser Arbeit zwei Themenfelder untersucht: Zum einen die Auswirkungen von Kernfreiheitsgraden auf die zweidimensionale vibronische Spektroskopie (2D-Spektroskopie) und zum anderen photoinduzierte Energieverlustmechanismen in organischen Halbleitern. Im ersten Abschnitt wird am numerischen Beispiel zweiatomiger Moleküle gezeigt, dass sich die Anharmonizität der Wellenpaketbewegung durch Variation der Verzögerungszeit der Femtosekundenpulse in der komplexwertigen Spektralfunktion, die aus der störungstheoretischen Berechnung der Polarisationsfunktion hervorgeht, widerspiegelt. Die zeitliche Entwicklung besetzter Vibrationszustände zeigt sich in der Struktur des Signals anhand sogenannter Quantenphasen. Durch Variation der Pulsparameter und -reihenfolge kann dabei die Quantendynamik in unterschiedlichen elektronischen Zuständen charakterisiert werden. Im zweiten Teil der Arbeit wird für molekulare Aggregate (3,4,9,10-Perylentetracarbonsäurediimid und 3,4,9,10-Perylentetracarbonsäuredianhydrid) ein zeitaufgelöstes, atomistisches Bild intra- und intermolekularer Strukturverzerrungen vorgestellt. Letztere induzieren eine ultraschnelle Depopulation der durch Photoabsorption angeregten elektronischen Zustände, was mit einer deutlichen Abnahme der Anregungsenergie einhergeht.
In this work a new algorithm to determine quantum control fields from the instantaneous response of systems has been developed. The derived fields allow to establish a direct connection between the applied perturbation and the molecular dynamics. The principle is most easily illustrated in regarding a classical forced oscillator. A particle moving inside the respective potential is accelerated if an external field is applied acting in the same direction as its momentum (heating). In contrary, a deceleration is achieved by a field acting in the opposite direction as the momentum (cooling). Furthermore, when the particle reaches a classical turning point and then changes its direction, the sign of the field has to be changed to further drive the system in the desired way. The frequency of the field therefore is in resonance with the oscillator. This intuitively clear picture of a driven classical oscillator can be used for directing (or controlling) quantum mechanical wave packet motion. The efficiency of the instantaneous dynamics algorithm was demonstrated in treating various model problems, the population transfer in double well potentials, excitation and dissociation of selective modes, and the population transfer between electronic states. Although it was not tried to optimize the fields to gain higher yields, the control was found to be very efficient. Driving population transfer in a double well potential could be shown to take place with nearly 100% efficiency. It was shown that selective dissociation within the electronic ground state of HOD can be performed by either maximizing a selected coordinate's differential momentum change or the energy absorption. Concerning the population transfer into excited electronic states, a direct comparison with common control algorithms as optimal control theory and genetic algorithms was accomplished using a one-dimensional representation of methyl iodide. The fields derived from the various control theories were effective in transferring population into the chosen target state but the underlying physical background of the derived optimal fields was not obvious to explain. The instantaneous dynamics algorithm allowed to establish a direct relation between the derived fields and the underlying molecular dynamics. Bound-to-bound transitions could be handled more effectively. This was demonstrated on the sodium dimer in a representation of 3 electronic states being initially in its vibronic ground state. The objective was to transfer population into a predefined excited state. Choosing the first or the second state as a target, the control fields exhibited quite different features. The pulse-structure is related to the excited state wave packet, moving in, and out of the Franck-Condon region. Changing the control objective, the derived control field performed pure electronic transitions on a fast time-scale via a two-step transition. Futhermore, orientational effects have been investigated. The overall-efficiency of the population transfer for differently oriented molecules was about 70 % or more if applying a control field derived for a 45° orientation. Spectroscopic methods to gain information about the outcome of the control process have been investigated. It was shown that pump/probe femtosecond ionization spectroscopy is suited to monitor time-dependent molecular probability distributions. In particular, time-dependent photoelectron spectra are able to monitor the population in the various electronic states. In the last chapter a different possibility of controlling molecules was regarded by investigating molecular iodine with a setup similar to the STIRAP (“Stimulated Raman Adiabatic passage”) scenario. The possibility to extend this technique to a fs-time scale was examined in theory as well as in experiments, the latter being performed by Dr. Torsten Siebert in the Kiefer group, University of Würzburg. It was shown that off-resonant excitation with implementation of the pulses with a higher intensity of the Stokes pulse as compared to the pump pulse - describing a so-called f-STIRAP like configuration - was shown to effectively transfer population into excited ground-state vibrational levels. This was theoretically underlined by comparing the numerically exact coupling case with the adiabatic picture. The process was described to run in the vicinity of adibaticity. A new model explaining the process by the system's vector rotating around the dressed state vector will be adopted in future calculations. Altogether, a new promising algorithm to control dynamical processes based on the instantaneous response has been developed. Because the derived control fields have been shown to be very efficient in selectively influencing molecules, it is to be expected that farther reaching applications can be realized in future investigations.
The present work consist of two major parts. The first part, extending over chapters 1, 2, 3 and 4, addresses the design and construction of a device capable of determining the shell thickness and the core size for monolayer spherical particles in a flow. The second part containing chapters 5, 6, 7, 8, 9 and 10, concentrate on the use of Raman spectroscopy as a space application, namely for use as a tool for in situ planetary investigations. This part directly addresses the MIRAS project, a study run under the auspices of Federal Ministry of Education and Research, BMBF and German Aerospace Center, DLR under national registration number 50OW0103. MIRAS stands for "Mineral Investigation by in situ Raman Spectroscopy". Microcapsule Sizing by Elastic Light Scattering The industrial development of processes based on microcapsules depends on the possibility to provide clear and complete information about the properties of these microcapsules. However, the tools for an easy and efficient determination of the microcapsule properties are lacking, several methods being often required to describe adequately the microcapsule behavior. Methods for evaluating the individual size and size distribution of both the core and the shell are required together with methods for measuring the mechanical strength, stability in appli-cation media, permeability of the shell, etc. Elastic light scattering measurements provide a possible way of determining properties such as core size, shell size and refractive index. The design and con-struction of a device capable of measuring the above mentioned parameters for a core-shell particle is the subject of the first part of this thesis. The basic principle of measurement for the device proposed here consists of an-alyzing one particle at a time by recording the elastic light scattering pattern at angles between approx. 60 and 120 grad. By comparing the experimentally recorded phase functions with the previously calculated phase functions stored in a database, the geometry of the scattering object can be identified. In our case the geometry is characterized by two parameters: the shell thickness and the core radius. In chapter 2 a short overview on the methods used for sizing microparticles is given. Different sizing methods are compared, and the advantages and disadvan-tages for the general problem of sizing are shortly discussed. It is observed that all sizing methods that are based on elastic light scattering theories are ensemble methods. Chapter 3 focusses on the theories used for calculating the theoretical scattering patterns with emphasize on the Mie theory. The generalization of Mie theory for layered particles is shortly presented and the far field intensity approximations are discussed. The last chapter (4) of this first part describes the experimental approach for building an automatic microcapsule sizer. The approach started by O. Sbanski [76] with the development of a software packet for calculating and storing theoret-ical phase functions for core-shell particles was continued with the designing and construction of a measuring device. The hardware construction and the software with all implemented corrections imposed by the individual setup components are described in detail. For the laser, the monochromaticity, the intensity profile of the beam as well as the planarity of the equi-phase fronts are taken into consid-eration. The flow cell with three different designs is described, and the influences of the employed design on the light scattering patterns are discussed together with the optical system used for recording the experimental phase functions. The detection system formed by two identical linear CCD arrays is presented together with the software approach used for data acquisition. Ways of improving the quality and the speed of the analyzing process are discussed. The final section presents measurements run on samples made of homogeneous spheres and also on samples containing industrial microcapsules. Mineral Investigation by in situ Raman Spectroscopy The envisaged future planetary missions require space-born instruments, which are highly miniaturized with respect to volume and mass and which have low needs of power. A micro Raman spectrometer as a stand alone device on a planetary surface (e.g. Mars) offers a wide spectrum of possibilities. It can assess the chemical analysis via determination of the mineral composition, detect organic molecules in the soil, identify the principal mineral phases, etc. The technical developments in the last years have introduced a new generation of small Raman systems suitable for robotic mineral characterization on planetary surfaces [20, 95]. Two different types of spectrometer were considered for the MIRAS study. As supporting laboratory experiments for the MIRAS study, the measure-ments on standard minerals and on SNC Mars meteorites are discussed in chapter 6. The following SNC meteorites have been investigated: Sayh al Uhaymir 060, Dar al Gani 735, Dar al Gani 476, Northwest Africa 856, Los Angeles, Northwest Africa 1068 and Zagami. Pyrite as a hitherto undescribed phase in the picritic (olivin-phyric) shergottite NWA 1068 as well as reduced carbon (e.g. graphite) and anatase in the shergottite Say al Uhaymir 060 are new findings for this class of meteorites. A detailed description of the proposed designs for MIRAS, with the compo-nents used for building the test version on a breadboard is covered in chapter 7. The scientific as well as the mission requirements imposed on the instrument are discussed. The basic design is presented and the main components that are brought together to build the device being the laser unit, the Raman head, the Rayleigh filtering box, and the spectral sensor (spectrometer with a matching de-tector) are described. The two proposed designs, one based on an acousto-optic tunable filter (AOTF) and the other based on a dispersive hadamard transform spectrometer are compared to each other. The actual breadboard setup with the detailed description of the components follows in Section 7.3. Further de-velopment of a Raman spectrometer for planetary investigations is proposed in combination with a microscope as part of the Extended-MIRAS project. The software developed for controlling the breadboard version of MIRAS is described in chapter 8 together with a short description of the structure of a relational database used for in house spectra management. The measuring pro-cedures and the data processing steps are presented. Spectra acquired with the MIRAS breadboard version based on the AOTF are shown in chapter 9. The final chapter addresses a rather different possibility of using Raman spectroscopy for planetary investigations. The chapter summarizes the content of four tech-nical notes that were established within the study contracted by the European Space Agency with firma Kayser-Threde in Munich concerning the possibility of applying Raman spectroscopy in the field of remote imaging.
Doping plays a decisive role for the functionality of semiconductor-based (opto-)electronic
devices. Hence, the technological utilization of semiconductors necessitates control and a
fundamental understanding of the doping process. However, for low-dimensional systems like
carbon nanotubes, neither concentration nor distribution of charge carriers is currently well known.
The research presented in this thesis investigated the doping of semiconducting carbon nanotubes by spectroscopic methods. Samples of highly purified, intrinsic (6,5) single-wall carbon nanotubes were fabricated using polymer stabilization.
Chapter 4 showed that both electro- and redox chemical $p$-doping lead to identical bleaching,
blueshift, broadening and asymmetry of the S$_1$ exciton absorption band. The similar spectral changes induced by both doping schemes suggest that optical spectra can not be used to infer what process was used for doping. Perhaps more importantly, it also indicates that the distribution of charges and the character of the charge transfer states does not depend on the method by which doping was achieved.
The detailed analysis of the doping-induced spectral changes in chapter 5 suggests that surplus charges are distributed inhomogeneously. The hypothesis of carrier localization is consistent with the high sensitivity of the S$_1$ exciton photoluminescence to additional charge carriers and with the stretched-exponential decay of the exciton population following ultrafast excitation.
Both aspects are in good agreement with diffusion-limited contact quenching of excitons
at localized charges. Moreover, localized charges act – similar to structural defects – as
perturbations to the bandstructure as evidenced by a doping-induced increase of the D-band
antiresonance in the mid-infrared spectrum.
Quantum mechanical model calculations also suggest that counterions play a crucial role in
carrier localization. Counterion adsorption at the nanotube surface is thus believed to induce charge traps of more than 100 meV depth with a carrier localization length on the order of 3 - 4 nm. The doping-induced bleach of interband absorption is accompanied by an absorption increase in the IR region below 600 meV. The observed shift of the IR peak position indicates a continuous transition from localized to rather delocalized charge carriers. This transition is caused by the increase of the overlap of charge carrier wavefunctions at higher charge densities and was modeled by classical Monte-Carlo simulations of intraband absorption.
Chapter 6 discussed the spectroscopy of heavily (degenerately) doped nanotubes, which are
characterized by a Drude-response of free-carrier intraband absorption in the optical conductivity spectrum. In the NIR spectral region, the S$_1$ exciton and X$+^_1$ trion absorption is replaced by a nearly 1 eV broad and constant absorption signal, the so-called H-band. The linear and transient absorption spectra of heavily doped nanotubes suggest that the H-band can be attributed to free-carrier interband transitions.
Chapter 7 dealt with the quantification of charge carrier densities by linear absorption spectroscopy.
A particularly good measure of the carrier density is the S$_1$ exciton bleach. For a
bleach below about 50 %, the carrier density is proportional to the bleach. At higher doping
levels, deviations from the linear behavior were observed. For doping levels exceeding a
fully bleached S$_1$ band, the determination of the normalized oscillator strength f$\text{1st}$ over the
whole first subband region (trion, exciton, free e-h pairs) is recommended for quantification of carrier densities. Based on the nanotube density of states, the carrier density $n$ can be estimated using $n = 0.74\,\text{nm}^{−1} \cdot (1 − f_\text{1st})$.
In the last part of this thesis (chapter 8), the time-resolved spectroelectrochemistry was
extended to systems beyond photostable carbon nanotube films. The integration of a flowelectrolysis cell into the transient absorption spectrometer allows the investigation of in-situ electrochemically generated but photounstable molecules due to a continuous exchange of sample volume. First time-resolved experiments were successfully performed using the dye
methylene blue and its electrochemically reduced form leucomethylene blue.
Im Rahmen dieser Dissertation wurden insgesamt drei verschiedene Fragestellungen an biologisch relevanten Modellsystemen mit Hilfe von diversen linearen und nichtlinearen Raman-spektroskopischen Techniken bearbeitet. Neben der Untersuchung von Wasserstoffbrücken-gebundenen Komplexen und ihrer Dynamik auf der fs-Zeitskala (Kapitel 4) bildeten Untersuchungen zur Struktur von Porphyrinen (Kapitel 5) und beta-Carotin (Kapitel 6) als Vertreter wichtiger Klassen von Biomolekülen den Schwerpunkt dieser Arbeit. Die spektroskopischen Ergebnisse wurden durchweg über Strukturen und Schwingungsspektren, welche mit Hilfe der Dichtefunktionaltheorie (DFT) berechnet wurden, unterstützt. Die dritte bearbeitete Thematik zum Nachweis anthropogener und ökologisch relevanter Aerosole war bioanalytisch motiviert und wurde anhand von Pestizid-Modellsubstanzen bearbeitet (Kapitel 7).
Diese Arbeit befasst sich mit verschiedenen Aspekten der Dynamik von Kernen, Elektronen und gekoppelten Kern-Elektron-Systemen, wobei je nach System unterschiedliche Herangehensweisen gewählt wurden.
Zentrale Punkte sind bei allen drei Kapiteln einerseits die Lokalisierung von Teilchen und Energie und andererseits eine hohe Sensitivität in Bezug auf die Wahl der Anfangsbedingungen.
Im ersten Teil wurden von der Carrier-Envelope-Phase (CEP) abhängende, laser-induzierte Lokalisierungen betrachtet. Das zentrale Element ist dabei das entwickelte Doppelpulsschema, mit welchem eine CEP-Abhängigkeit in beobachtbaren Größen erzeugt wird. Als Beispielsysteme wurden die Fragmentation im D₂⁺-Modellsystem und eine Isomerisierung im Doppelminimumpotential (DMP) untersucht. Als Observable wird die Asymmetrie betrachtet
Im DMP kann die Asymmetrie mit dem Entantiomeren/Isomerenüberschuss gleich gesetzt werden kann und im D₂⁺-Modellsystem mit der Lokalisierung des Elektrons auf einem der beiden dissoziierenden Kerne.
Eine Phasenabhängigkeit der Asymmetrien besteht nur für die CEP des zweiten Pulses φ₂, für welchen keine Begrenzungen für die Anzahl an Laserzyklen auftreten.
Im DMP wurde die CEP-Abhängigkeit der Asymmetrien auch bei unterschiedlichen Startkonfigurationen untersucht. Für alle untersuchten Startkonfigurationen konnte ein Laserparametersatz gefunden werden, der für zumindest eine der beiden Asymmetrien eine CEP-Abhängigkeit liefert. Aufgrund der aufgehobenen energetischen Entartung der Paare gerader und ungerader Symmetrie ist die resultierende Lokalisierung zeitabhängig. Zur Messung der vorhergesagten Dynamiken ist z.B. die Aufnahme eines Photoelektronen-Spektrums denkbar.
In nächsten Kapitel wurden unterschiedliche Dynamiken innerhalb eines 4d Kern-Elektron-Modells in der Nähe einer konischen Durchschneidung (CI) zweier Potentiale betrachtet. Hierbei ist hervorzuheben, dass eine solche gleichzeitige Untersuchung von Kern- und Elektron-Dynamik in Systemen mit CIs in der Literatur, nach Wissen des Autors, bisher nicht veröffentlicht ist. Das 4d-Potential wurde mit Hilfe des sogenannten Potfit-Algorithmus gefittet. Dieser Fit wurde anschließend verwendet, um die Dynamik des gekoppelten Systems mit Hilfe der ”Multi-Configuration Time-Dependent Hartree”(MCTDH)-Methode zu berechnen. Aus der Analyse der gekoppelten Kern-Elektron-Wellenfunktion ergaben sich zwei grundlegend unterschiedliche Klassen von Dynamiken:
• Diabatisch: Kern- und Elektrondynamik sind nahezu entkoppelt. Der Kern bewegt sich und das Elektron bleibt statisch.
• Adiabatisch: Kern- und Elektrondynamik sind stark gekoppelt. Die Kerndynamik findet auf Kreisbahnen statt. Mit der Rotation der Kerndichte um den Winkel φ geht eine Rotation der Elektron-Dichte einher.
Die diabatische Bewegung entspricht der Dynamik durch die konische Durchschneidung und die adiabatische Bewegung der Dynamik auf der unteren Potentialfläche. Welche der beiden Dynamiken stattfindet, wird durch die Wahl der Anfangsbedingung bestimmt. Der wesentliche Unterschied zwischen den beiden Startzuständen ist dabei die Lage des Knotens im elektronischen Anteil der Wellenfunktion. In den diabatischen Bewegungen bleibt z.B. der pₓ -artige Charakter der elektronischen Wellenfunktion konstant, wohingegen sich bei der adiabatischen Dynamik der Charakter mit der Kernbewegung ändert. Die Zeitersparnis durch die Verwendung des MCTDH-Ansatzes im Vergleich zur Split-Operator-Methode liegt etwa bei einem Faktor 5.
Das letzte Kapitel widmet sich der mikroskopischen Beschreibung von Exziton-Exziton-
Annihilierung (EEA). Dabei werden numerische Lösungen der aus einem mikro-
skopischen Modell hergeleiteten Ratengleichungen mit Messungen ( transienter Absorption) verglichen. Es wurden zwei Systeme untersucht: ein Squarain-basiertes Heteropolymer (SQA-SQB)ₙ und ein [2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenvinylen]-Polymer, auch bekannt als MEH-PPV. In beiden Fällen gelang die systematische Parameterbestimmung mit Hilfe einer Aufteilung in lokalisierte Subsysteme. Diese Subsysteme werden einzeln gewichtet und anschließend aufsummiert, wobei die Gewichte optimiert werden können. Aus den so erhaltenen Parametern ergibt sich für beide Systeme ein ähnliches Bild:
• Durch ultraschnelle Lokalisierung der Anregung im fs-Bereich auf kleinere Aggregateinheiten bilden sich voneinander getrennte Subsysteme.
• Die in den Subsystemen lokalisierten Exzitonen können sich nur innerhalb dieser Bereiche frei bewegen. Es ist ausreichend, direkt benachbarte Mono-, Bi-, Tri- und Tetra-Exzitonen in bis zu zwei Dimensionen zu berücksichtigen.
• Auf einer fs-Zeitskala annihilieren direkt benachbarte Exzitonen.
• Im MEH-PPV ergibt sich der Signalzerfall im fs-Bereich als Mittelwert aus einer schnellen (zwischen Ketten) und einer langsamen (innerhalb von Ketten) Annihilierung.
• Im ps- bis ns-Bereich wird sowohl durch Diffusion vermittelte Annihilierung, also auch der Zerfall der ersten angeregten Zustände bedeutsam.
The SARS virus is the etiological agent of the severe acute respiratory syndrome, a deadly disease that caused more than 700 causalities in 2003. One of its viral proteins, the SARS coronavirus main protease, is considered as a potential drug target and represents an important model system for other coronaviruses. Despite extensive knowledge about this enzyme, it still lacks an effective anti-viral drug. Furthermore, it possesses some unusual features related to its active-site region. This work gives atomistic insights into the SARS coronavirus main protease and tries to reveal mechanistic aspects that control catalysis and inhibition. Thereby, it applies state-of-the-art computational methods to develop models for this enzyme that are capable to reproduce and interpreting the experimental observations. The theoretical investigations are elaborated over four main fields that assess the accuracy of the used methods, and employ them to understand the function of the active-site region, the inhibition mechanism, and the ligand binding. The testing of different quantum chemical methods reveals that their performance depends partly on the employed model. This can be a gas phase description, a continuum solvent model, or a hybrid QM/MM approach. The latter represents the preferred method for the atomistic modeling of biochemical reactions. A benchmarking uncovers some serious problems for semi-empirical methods when applied in proton transfer reactions. To understand substrate cleavage and inhibition of SARS coronavirus main protease, proton transfer reactions between the Cys/His catalytic dyad are calculated. Results show that the switching between neutral and zwitterionic state plays a central role for both mechanisms. It is demonstrated that this electrostatic trigger is remarkably influenced by substrate binding. Whereas the occupation of the active-site by the substrate leads to a fostered zwitterion formation, the inhibitor binding does not mimic this effect for the employed example. The underlying reason is related to the coverage of the active-site by the ligand, which gives new implications for rational improvements of inhibitors. More detailed insights into reversible and irreversible inhibition are derived from in silico screenings for the class of Michael acceptors that follow a conjugated addition reaction. From the comparison of several substitution patterns it becomes obvious that different inhibitor warheads follow different mechanisms. Nevertheless, the initial formation of a zwitterionic catalytic dyad is found as a common precondition for all inhibition reactions. Finally, non-covalent inhibitor binding is investigated for the case of SARS coranavirus main protease in complex with the inhibitor TS174. A novel workflow is developed that includes an interplay between theory and experiment in terms of molecular dynamic simulation, tabu search, and X-ray structure refinement. The results show that inhibitor binding is possible for multiple poses and stereoisomers of TS174.
Mechanistic Insights into the Inhibition of Cathepsin B and Rhodesain with Low-Molecular Inhibitors
(2019)
Cysteine proteases play a crucial role in medical chemistry concerning various fields reaching from more common ailments like cancer and hepatitis to less noted tropical diseases, namely the so-called African Sleeping Sickness (Human Arfican Trypanosomiasis). Detailed knowledge about the catalytic function of these systems is highly desirable for drug research in the respective areas. In this work, the inhibition mechanisms of the two cysteine proteases cathepsin B and rhodesain with respectively one low-molecular inhibitor class were investigated in detail, using computational methods. In order to sufficiently describe macromolecular systems, molecular mechanics based methods (MM) and quantum mechanical based method (QM), as well as hybrid methods (QM/MM) combining those two approaches, were applied.
For Cathespin B, carbamate-based molecules were investigated as potential inhibitors for the cysteine protease. The results indicate, that water-bridged proton-transfer reactions play a crucial role for the inhibition. The energetically most favoured pathway (according to the calculations) includes an elimination reaction following an E1cB mechanism with a subsequent carbamylation of the active site amino acid cysteine.
Nitroalkene derivatives were investigated as inhibitors for rhodesain. The investigation of structurally similar inhibitors showed, that even small steric differences can crucially influence the inhibition potential of the components. Furthermore, the impact of a fluorination of the nitroalkene inhibitors on the inhibition mechanism was investigated. According to experimental data measured from the working group of professor Schirmeister in Mainz, fluorinated nitroalkenes show – in contrast to the unfluorinated compounds – a time dependent inhibition efficiency. The calculations of the systems indicate, that the fluorination impacts the non-covalent interactions of the inhibitors with the enzymatic environment of the enzyme which results in a different inhibition behaviour.
Time-resolved spectroscopic studies of energy transfer between molecules in solution form a basis for both, our understanding of fundamental natural processes like photosynthesis as well as directed synthetic approaches to optimize organic opto-electronic devices. Here, coherent two-dimensional (2D) spectroscopy opens up new possibilities, as it reveals the correlation between absorption and emission frequency and hence the full cause-and-effect chain. In this thesis two optical setups were developed and implemented, permitting the recording of electronic 2D spectra in the visible and in the hitherto unexplored ultraviolet spectral range. Both designs rely on the exclusive manipulation of beam pairs, which reduces the signal modulation to the difference between the transition frequency of the system and the laser frequency. Thus - as has been shown experimentally and theoretically - the timing precision as well as mechanical stability requirements are greatly reduced, from fractions of the oscillation period of the exciting light wave to fractions of the pulse duration. Two-dimensional spectroscopy and femtosecond transient absorption (TA) as well as different theoretical approaches and simulation models were then applied to coupled multichromophore systems of increasing complexity. Perylene bisimide-perylene monoimide dyads were investigated in cooperation with Prof. Dr. Frank Würthner and Prof. Dr. Bernd Engels at the University of Würzburg. In these simplest systems studied, global analysis of six different TA experiments unequivocally revealed an ultrafast interchromophoric energy transfer in the 100 fs range. Comparison between the obtained transfer rates and the predictions of Förster theory suggest a breakdown of this point-transition-dipole-based picture at the donor-acceptor distances realized in our compounds. Furthermore, a model including conformational changes and an interchromophoric charge transfer has been derived to consistently describe the observed pico- to nanosecond dynamics and fluorescence quantum yields. A second collaboration with Prof. Dr. Gregory Scholes (University of Toronto, Canada) and Prof. Dr. Paul Burn (University of Queensland, Australia) addressed the photophysics of a series of uorene-carbazole dendrimers. Here, a combination of 2D-UV spectroscopy and femtosecond ansiotropy decay experiments revealed the initial delocalization of the excited state wave function that saturates with the second generation. In room temperature solution, disorder-induced localization takes place on the time scales comparable to our instrument response, i.e. 100 fs, followed by energy transfer via incoherent hopping processes. Lastly, in tubular zinc chlorin aggregates, semi-synthetic analogues of natural lightharvesting antennae that had again been synthesized in the group of Prof. Dr. Frank Würthner, the interchromophoric coupling is so strong that coherently coupled domains prevail even at room temperature. From an analysis of intensity-dependent TA measurements the dimensions of these domains, the exciton delocalization length, could be determined to span 5-20 monomers. In addition, 2D spectra uncovered efficient energy transfer between neighboring domains, i.e. ultrafast exciton diffusion.
In dieser Arbeit werden biologisch relevante Oberflächen untersucht, die in der Medizin bzw. in der Biologie eine wichtige Rolle spielen. Die Proteinadsorption auf Implantat-Oberflächen wurde charakterisiert, um wichtige Informationen über den Adsorptionsprozess zu erhalten. Das Fernziel hierbei ist, durch ein umfassendes Wissen über diesen für die Implantation wichtigen Schritt Biomaterialien mit möglichst hoher Gewebeverträglichkeit zu entwickeln. Die Verteilung von Propolis auf der Wachs-Oberfläche von Bienenwaben wurde untersucht, um mehr über dessen Nutzen, der noch nicht vollständig aufgeklärt ist, zu erfahren und um auf mögliche Auswirkungen einer veränderten Wabenstruktur auf die Kommunikation der Honigbienen Rückschlüsse ziehen zu können. Das Ziel des ersten Teils dieser Arbeit war, das Adsorptionsverhalten der Proteine Fibrinogen, Albumin und Fibronektin auf Titandioxid, einem in der Medizin häufig als Implantat eingesetzten Material, zu studieren. Die Adsorption von Proteinen auf der Oberfläche von Implantaten ist ein wichtiger Schritt für die Gewebeverträglichkeit bzw. Biokompatibilität dieser Materialien. Es wurden sowohl die räumliche Verteilung der Proteine auf den Implantat-Oberflächen als auch die durch die Adsorption hervorgerufenen strukturellen Veränderungen der Proteine untersucht. Als Methoden wurden hierfür die Laser-Raster-Mikroskopie (LSM), die Kraftfeldmikroskopie (AFM) sowie die Raman-Spektroskopie eingesetzt. Durch ein umfassendes Wissen über den Adsorptionsprozess der Proteine auf Implantat-Materialien können die Oberflächen der Implantate dahingehend verändert werden, dass es zu einer besseren Proteinadsorption und dadurch zu einer noch geringeren Rate an Abstoßungsreaktionen kommt. Die in dieser Arbeit vorgestellten Ergebnisse können einen Teil zum Verständnis des Adsorptionsprozesses beitragen. Das Ziel des zweiten Teils dieser Arbeit war es, die chemische Zusammensetzung von Propolis (dem Kittharz der Bienen) und Wabenwachs von Apis mellifera carnica Pollm. sowie die räumliche Verteilung von Propolis auf den Waben-Oberflächen zu untersuchen. Hierzu wurden die Raman-Spektroskopie und Raman-Mapping eingesetzt. Es wurden zunächst Raman-Spektren von Propolis-Proben sowie Raman-Spektren von charakteristischen Standardsubstanzen des Propolis aufgenommen. Das Propolis-Spektrum sowie das Wachs-Spektrum wurden durch eine Auswahl an Standardsubstanzen simuliert. Um herauszufinden, welche Harze von den Bienen gesammelt und als Propolis im Stock verwendet werden, wurden von einigen Harzen, die als Propolis-Quellen in Betracht kommen, Raman-Spektren aufgenommen. Es wurde auch analysiert, ob die Kettenlängen der Alkane, aus denen die Wachse bestehen, einen Einfluss auf die Raman-Spektren hat. Mittels Raman-Mapping wurde schließlich die räumliche Verteilung von Propolis auf der Waben-Oberfläche untersucht. Die hier charakterisierten biologisch relevanten Oberflächen spielen eine wichtige Rolle in der Medizin und in der Biologie. Die Analyse mit mikroskopischen und spektroskopischen Methoden verschafft einen Einblick in die Prozesse, die sich an diesen Oberflächen abspielen. Die Proteinadsorption auf Implantat-Oberflächen sind für die Implantationsmedizin von Bedeutung. Es werden ständig neue Materialien entwickelt, die eine möglichst gute Biokompatibilität aufweisen sollen. Erkenntnisse über die Prozesse, die hierfür eine Rolle spielen, helfen bei der Entwicklung neuer Materialien. Die Verteilung von Propolis auf den Wachs-Oberflächen hat einen Einfluss auf die Materialbeschaffenheit der Waben. Dies könnte die Vibrationsweiterleitung beim Schwänzeltanz der Honigbienen, der für deren Kommunikation von Bedeutung ist, beeinflussen. Die Verteilung des Propolis auf den Waben konnte für kleine Ausschnitte gezeigt werden. Inwiefern eine Propolisschicht auf den Stegen der Waben die Vibrationsweiterleitung tatsächlich beeinflusst, muss durch weiterführende Experimente herausgefunden werden.
The aim of this thesis was to develop new automatic enhanced sampling methods by extending the idea of Parrinello’s metadynamics to multistate problems and by introducing new quantum-mechanical electronic collective variables. These methods open up a rich perspective for applications to the photophysical processes in complex molecular systems, which play a major role in many natural processes such as vision and photosynthesis, but also in the development of new materials for organic electronics, whose function depends on specific electronic properties such as biradicalicity.
Nanoröhren, die auf dem Element Kohlenstoff basieren, besitzen ein großes Potential für ihre
Anwendung als neuartige und nachhaltige Materialien im Bereich der Optoelektronik und weiteren
zukunftsweisenden Technologiefeldern. Um jedoch hierfür genutzt werden zu können, ist
ein tiefgreifendes Kenntnis über ihre außergewöhnlichen photophysikalischen Eigenschaften notwendig.
Kohlenstoffnanoröhren sind als eindimensionale Halbleiter sehr vielseitige Materialien.
Jedoch ist der Zusammenhang zwischen ihrer Eignung als Halbleiter und der dafür notwendigen
Dotierung nur sehr unzureichend verstanden.
Die Ziele der vorliegenden Dissertation waren deshalb, ein grundlegendes Verständnis der photophysikalischen
Energietransferprozesse in Nanoröhren zu erlangen und den Einfluss von gezielten
Dotierungen auf diese Prozesse im Hinblick auf ihre Eigenschaften als eindimensionale Halbleiter
detailliert zu untersuchen. Die Grundlage für die Experimente bildeten verschiedene Filme
aus einwandigen (6,5)-Kohlenstoffnanoröhren, die durch ein Polyfluoren-Copolymer in einer
organischen Lösungsmittelumgebung isoliert wurden. Mit Hilfe der Ultrakurzzeitspektroskopie
wurden die auf einer schnellen (ps-ns) Zeitskala ablaufenden photophysikalischen Prozesse an
diesen Filmen unter verschiedenen Bedingungen untersucht und analysiert.
In Kapitel 4 wurde der generelle Energietransfer der Kohlenstoffnanoröhren in Polymermatrizen
im Detail studiert. Hierbei wurden durch Simulationen theoretische dreidimensionale
Verteilungen von Kohlenstoffnanoröhren erzeugt und die nach einem Energietransfer vorliegenden
Polarisationsanisotropien berechnet. Verschiedene Berechnungsansätze ergaben, dass die
Nanorohrdichte ϱSWCNT für ein Massenüberschuss X der Matrix nahezu unabhängig von dem
Röhrenvolumen war und durch ϱSWCNT = X−1 · 40 000 μm−1 angenähert werden konnte. Die
Simulationen lieferten von der Röhrendichte abhängige Gaußverteilungen der zwischen den
Nanoröhren vorliegenden Abständen. Aus den Verteilungen konnte weiterhin der Anteil an Röhren
bestimmt werden, die für einen Energietransfer zur Verfügung stehen. Weitere Simulationen
von Nanorohrverteilungen lieferten die Polarisationsanisotropie in Abhängigkeit von der Anzahl
an durchgeführten Energietransferschritten. Die Ergebnisse aus den Simulationen wurden zur
Interpretation der Ultrakurzzeitmessungen angewandt. Hierbei wurden durch die Variation der
Polymermatrix die zwischen den Nanoröhren vorliegenden Abstände verändert und damit die
Art und Intensität des Energietransfers kontrolliert. In Messungen der transienten Anisotropie
zeigte sich, dass ein Exziton nach seiner Erzeugung zwei depolarisierende Energietransferschritte
durchführte. Die Zerfallsdynamiken des Exzitons gaben auch klare Hinweise auf weitere nicht
depolarisierende Energietransferprozesse, die durch parallel zueinander stehende Übergangsdipolmomente
ermöglicht wurden. Eine Erklärung für dieses Verhalten lieferte die faserige
Struktur der Filme, die sich in Aufnahmen durch das Elektronenmikroskop zeigte.
Das Kapitel 5 beschäftigte sich mit dem Aufbau eines transienten Nahinfrarotspektrometers
und den nötigen experimentellen Umbauten zur Messung der transienten Absorption für energiearme
Signale im Spektralbereich unterhalb von 1.4 eV. Hierzu wurde die Weißlichterzeugung
für die Verwendung von Calciumfluorid umgebaut. Das erzeugte Weißlicht wurde in das aufgebaute
Prismenspektrometer eingekoppelt, um es weitestgehend linear auf einer Energieskala zu dispergieren. Auf diese Weise wurden energiearme Spektralkomponenten nicht auf unverhältnismäßig
viele Pixel verteilt und konnten mit ausreichender Intensität detektiert werden. Die
Lichtdetektion erfolgte mittels zweier Detektorzeilen aus Indiumgalliumarsenid, die das transiente
Signal durch eine direkte Referenzierung stabilisierten. Weiterhin wurde in diesem Kapitel die
Justage und die programmierte Ansteuerung des Systems detailliert beschrieben. Hierbei wurde
auf die Justage der Einkopplung per Freistrahl, die Kalibrierung mittels Bandpassspektren
sowie auf die Aufnahme von Weißlichtspektren und transienten Karten detailliert eingegangen.
An Nanorohrdispersionen durchgeführten Testmessungen zeigten, dass das transiente Nahinfrarotspektrometer
mit direkter Signalreferenzierung einwandfrei funktionierte und daher den
beobachtbaren Spektralbereich auf den Bereich von Energien bis unterhalb von 1 eV erweiterte.
Damit ermöglichte der Aufbau einen Zugang zu der Beobachtung größerer Nanorohrchiralitäten
sowie zu der Untersuchung von energiearmen, spektralen Signaturen von Nanorohrdefekten.
In Kapitel 6 wurde das transiente Nahinfrarotspektrometer genutzt, um das zeitabhängige
Verhalten von redoxchemisch p-dotierten Nanoröhren zu charakterisieren und quantitativ zu
beschreiben. Hierzu wurden die spektralen Eigenschaften von SWCNT-Dünnfilmen als Funktion
eines steigenden Dotierungsgrades durch die Messungen der transienten und linearen Absorption
studiert. In der linearen Absorption im Bereich von 0.9 - 2.5 eV vereinfachte sich das Spektrum
mit ansteigender Dotierung stark und verlor vor allem im Bereich des ersten Subbandes
deutlich an Oszillatorstärke. Bei starker Dotierung verschwanden die Signalbeiträge von X1
und der Phononenseitenbande. Weiterhin bleichte auch die bei mittleren Dotierungsgraden
auftauchende Trionenabsorption aus und ging in die breite Absorptionsbande der H-Bande über.
Das Erscheinen und Verschwinden der trionischen sowie exzitonischen Absorption war ebenfalls
in der transienten Absorption durch zeitgleich auftretende/verschwindende Photobleichsignale
zu erkennen. Sowohl der Zerfall des exzitonischen PB-Signals wie auch des Trions beschleunigte
sich mit einer steigenden Dotierung. Die Zerfallszeit des Exzitons im undotierten Film betrug
6.87 ps und verkürzte sich auf 0.732 ps bei höheren Dotierungsgraden. Die Zerfallszeit des Photobleichens
des Trions reduzierte sich von 2.02 ps auf 0.440 ps. Auffallend war hierbei, dass das
Trion im Vergleich zu dem Exziton exponentiell zerfiel und damit auf eine Lokalisierung dieses
Zustandes hinweist. Bei höheren Dotierungsmittelkonzentrationen tauchte in der transienten
Absorption ein neuer Signalbeitrag auf. Die Existenz dieses Signals konnte auf die H-Bande
zurückgeführt werden und könnte auf einer Verschiebung des linearen Absorptionsspektrums
aufgrund einer Renormalisierung der Bandlücke oder der Sättigung von Ladungsträgern beruhen.
Das Signal zeigte eine klare Abhängigkeit vom Dotierungsgrad des Nanorohrfilmes. So wies es
eine hypsochrome Verschiebung auf, wurde spektral breiter und seine Zerfallsdauer reduzierte
sich von 1.62 ps auf 0.520 ps mit steigendem Dotierungsgrad.
The visualization of energy functions is based on the possibility of separating different degrees of freedom. The most important one is the Born-Oppenheimer-approximation, which separates nucleus and electron movements. This allows the illustration of the potential energy as a function of the nuclei coordinates. Minima of the surface correspond to stable points like isomers or conformers. They are important for predicting the stability or thermodynamical of a system. Stationary points of first order correspond to transition points. They describe phase transitions, chemical reaction, or conformational changes. Furthermore, the partition function connects the potential hypersurface to the free energy of the system. The aim of the present work is the development and application of new approaches for the efficient exploration of multidimensional hypersurfaces. Initially, the Conformational Analysis and Search Tool (CAST) program was developed to create a basis for the new methods and algorithms. The development of CAST in object oriented C++ included, among other things, the implementation of a force field, different interfaces to external programs, analysis tools, and optimization libraries. Descriptions of an energy landscape require knowledge about the most stable minima. The Gradient Only Tabu Search (GOTS) has been shown to be very efficient in the optimization of mathematical test functions. Therefore, GOTS was taken as a starting point. Tabu-Search is based on the steepest descent - modest ascent strategy. The steepest descent is used for finding local minima, while the modest ascent is taken for leaving a minimum quickly. Furthermore, Tabu-Search is combined with an adaptive memory design to avoid cycling or returning. The highly accurate exploration of the phase space by Tabu-Search is often too expensive for complex optimization problems. Therefore, an algorithm for diversification of the search is required. After exploration of the proximity of the search space, the algorithm would guide the search to new and hopefully promising parts of the phase space. First application of GOTS to conformational search revealed weaknesses in the diversification search and the modest ascent part. On the one hand, the original methodology for diversification is insufficiently diverse. The algorithm is considerably improved by combining the more local GOTS with the wider searching Basin Hopping (BH) approach. The second weak point is a too inaccurate and inefficient modest ascent strategy. Analysis of common transition state search algorithms lead to the adaption of the Dimer-method to the Tabu-Search approach. The Dimer-method only requires the first derivatives for locating the closest transition state. For conformational search, dihedral angles are usually the most flexible degrees of freedom. Therefore, only those are used in the Dimer-method for leaving a local minimum. Furthermore, the exact localization of the reaction pathway and the transition state is not necessary as the local minimum position should only be departed as fast as possible. This allows for larger step sizes during the Dimer-search. In the following optimization step, all coordinates are relaxed to remove possible strains in the system. The new Tabu-Search method with Dimer-search delivers more and improved minima. Furthermore, the approach is faster for larger systems. For a system with approximately 1200 atoms, an acceleration of 40 was measured. The new approach was compared to Molecular Dynamics with optimization (MD), Simulated Annealing (SA), and BH with the help of conformational search problems of bio-organic systems. In all cases, a better performance was found. A comparison to the Monte Carlo Multiple Minima/Low Mode Sampling (MCMM/LM) method proved the outstanding performance of the new Tabu-Search approach. The solvation of the chignolin protein further revealed the possibility of uncovering discrepancies between the employed theoretical model and the experimental starting structure. Ligand optimization for improvement of x-ray structures was one further new application field. Besides the global optimization, the search for transition states and reaction pathways is also of paramount importance. These points describe different transitions of stable states. Therefore, a new approach for the exploration of such cases was developed. The new approach is based on a global minimization of a hyperplane being perpendicular to the reaction coordinate. Minima of this reduced phase space belong to traces of transition states between reactant and product states on the unchanged hypersurface. Optimization to the closest transition state using the Dimer-method delivers paths lying between the initial and the final state. An iterative approach finally yields complex reaction pathways with many intermediate local minima. The PathOpt algorithm was tested by means of rearrangements of argon clusters showing very promising results.
Die vorliegende Arbeit hat zum Ziel, das Antwortverhalten nichtlinearer Reaktionen auf zielgerichtete Störungen zu untersuchen. Dabei beschäftigt sie sich mit zwei nichtlinearen chemischen Sauerstoff-Oszillatoren. Bei den beiden nichtlinearen chemischen Reaktionen handelt es sich um den Polyacrylamid-Methylenblau-Sauerstoff- (PA-MBO) Oszillator und um die Kupfer(II)ionen katalysierte Oxidation von Ascorbinsäure durch Luftsauerstoff. Im ersten Fall wird durch selektive Belichtung des Reaktionsmediums die gebildete Geloberfläche durch ein computergenerirtes Muster kodiert. Die Systemantwort wird mit Hilfe einer CCD-Kamera aufgenommen und danach einer Analyse unterzogen. Die erhaltenen Ergebnisse werden anschließend durch eine Computersimulation verifiziert. Die zweite untersuchte Möglichkeit, das PA-MBO-System einer Störung zu unterwerfen, ist das Anlegen eines externen elektrischen Feldes. In einer speziell dafür entworfenen Anordnung bildet sich ein quasi-eindimensionales Turing-Muster. In dieser quasi-eindimensionalen Anordnung kann die Reaktion leicht elektrischen Strömen von bis zu 200 mA/cm2 ausgesetzt werden. Die experimentellen Daten werden anschließend der Karhunen-Loeve Zerlegung unterworfen, um die komplexe Dynamik der Systemantwort zu studieren. Die Oxidation von Ascorbinsäure durch Luftsauerstoff in Gegenwart von Kupfer(II)ionen, wird im CSTR durchgeführt. Dabei läßt sich das Phänomen der stochastischen Resonanz beobachten, wenn man die Flußrate sinusförmig moduliert und dieser Frequenz zusätzlich weißes Rauschen überlagert.
In this thesis, several contributions to the understanding and modeling of chemical phenomena using computational approaches are presented. These investigations are characterized by the usage of non-standard computational modeling techniques, which is necessitated by the complex nature of the electronic structure or atomic fluctuations of the target molecules.
Multiple biradical-type molecules and their spectroscopic properties were modeled. In the course of the investigation, it is found that especially the impact of correct molecular geometries on the computationally predicted absorption properties may be critical. In order to find the correct minimum geometries, Multi-Reference methods may have to be invoked.
The impact of geometry relaxation on the excitonic properties of Perylene Bisimide dimers were investigated. Oftentimes, these geometry factors are neglected in Organic Semiconductor modeling as an approximation. This present investigation suggests that this approximation is not always valid, as certain regimes are identified where geometrical parameters have critical impact on the localization and energetic properties of excitons.
The mechanism of the Triazolinedione (TAD) tyrosine bioconjugation reaction is investigated using quantum-chemical methods. By comparison of different conceivable mechanisms and their energetic ordering, the TAD tyrosine bioconjugation is found to proceed by means of a base-mediated electrophilic aromatic substitution reaction.
The kth nearest neighbor entropy estimation protocol is investigated. This estimator promises accurate entropy estimates even for flexible molecules with multiple structural minima. Our granular investigation of formal and practical properties of the estimator suggests that the uneven variance of a molecule’s vibrational modes is the cause of the observed slow convergence of the estimator. A rescaling procedure to reestablish fast convergence is suggested and benchmarks are performed.
An experimental setup for probing ultrafast dynamics at the diffraction limit was developed, characterized and demonstrated in the scope of the thesis, aiming for optical investigations while simultaneously approaching the physical limits on the length and timescale.
An overview of this experimental setup was given in Chapter 2, as well as the considerations that led to the selection of the individual components. Broadband laser pulses with a length of 9.3 fs, close to the transform limit of 7.6 fs, were focused in a NA = 1.4 immersion oil objective, to the diffraction limit of below 300 nm (FWHM).
The spatial focus shape was characterized with off-resonance gold nanorod scatterers scanned through the focal volume. For further insights into the functionality and limitations of the pulse shaper, its calibration procedure was reviewed. The deviations between designed and experimental pulse shapes were attributed to pulse-shaper artifacts, including voltage-dependent inter-layer as well as intra-layer LCD-pixel crosstalk, Fabry-Pérot-type reflections in the LCD layers, and space-time coupling. A pixel-dependent correction was experimentally carried out, which can be seen as an extension of the initial calibration to all possible voltage combinations of the two LCD layers.
The capabilities of the experimental setup were demonstrated in two types of experiments, targeting the nonlinearity of gold (Chapter 3) as well as two-dimensional spectroscopy at micro-structured surfaces (Chapter 4).
Investigating thin films, an upper bound for the absolute value for the imaginary part of the nonlinear refractive index of gold could be set to |n′′ 2 (Au)| < 0.6·10−16 m2/W, together with |n′ 2 (Au)| < 1.2·10−16 m2/W as an upper bound for the absolute value of the real part. Finite-difference time-domain simulations on y-shaped gold nanostructures indicated that a phase change of ∆Φ ≥ 0.07 rad between two plasmonic modes would induce a sufficient change in the spatial contrast of emission to the far-field to be visible in the experiment. As the latter could not be observed, this value of ∆Φ was determined as the upper bound for the experimentally induced phase change. An upper bound of 52 GW/cm2 was found for the damage threshold.
In Chapter 4, a novel method for nonlinear spectroscopy on surfaces was presented. Termed coherent two-dimensional fluorescence micro-spectroscopy, it is capable of exploring ultrafast dynamics in nanostructures and molecular systems at the diffraction limit. Two-dimensional spectra of spatially isolated hotspots in structured thin films of fluorinated zinc phthalocyanine (F16ZnPc) dye were taken with a 27-step phase-cycling scheme. Observed artifacts in the 2D maps were identified as a consequence from deviations between the desired and the experimental pulse shapes. The optimization procedures described in Chapter 2 successfully suppressed the deviations to a level where the separation from the nonlinear sample response was feasible.
The experimental setup and methods developed and presented in the scope of this thesis demonstrate its flexibility and capability to study microscopic systems on surfaces. The systems exemplarily shown are consisting of metal-organic dyes and metallic nanostructures, represent samples currently under research in the growing fields of organic semiconductors and plasmonics.
The present work presents investigations on energy and charge transport properties in organic crystals. Chapter 4 treats exciton transport in anthracene, which is an example for weakly coupled π-systems. The electronic coupling parameter is evaluated by the monomer transition density approach. With these and the reorganization energy hopping rates are calculated in the framework of the Marcus theory. Together with the knowledge of the crystal structure, these allow us to calculate the experimental accessible exciton diffusion lengths, whose isotropic part fits nicely within the scattering of experimental values found in the literature. Furthermore, the anisotropy of the exciton diffusion lengths is reproduced qualitatively and quantitatively correct. This chapter also contains studies about electron and hole transport in both polymorphs (α and β) of perylene. Reorganization energies as well as diffusion coefficients for both crystal structures and types of charge transport were calculated. The best transport is hole transport in β-perylene, but it is strongly isotropic. The preferred transport direction is along the b-axis of the unit cell with couplings of greater than 100 meV. However, there is no transport along the c-axis. The diffusion constant in b-direction is bigger by two orders of magnitude than in c-direction (62.7•10-6 m2/s vs. 0.4•10-6 m2/s). Charge transport is calculated to be strongly anisotropic for holes as well as electrons in both modifications. To verify these results experimental electron mobilities have been compared to the simulations. Good agreement was found with errors of less than 27%. As it was shown above, the calculation and measurement of transport properties between weakly coupled systems is possible. However, it is difficult to exactly determine the quality of the electronic coupling. For this reason a collaboration about strongly interacting π-systems was started between us and the research group of Prof. Ingo Fischer. There, [2.2]paracyclophanes and its derivates were investigated to show how hydroxyl substitution influences absorption properties. Overall, a combination of SCS-MP2 and SCS-CC2 performs best to address the description of geometric and electronic structures for both ground and excited states of these model systems as well as their parent compounds benzene and phenol. Only [2.2]paracyclophane shows a double minimum potential regarding a twist and shift motion between the benzene/phenol subunits towards each other. All other systems are less flexible due to their substitution pattern. Almost all [2.2]paracyclophanes display minor changes in their geometric structure upon excitation to the S1 state: The inter-ring distance shortens, but qualitatively they keep their shift and twist characteristics, although the extent of these deformations diminishes. The exception is p-DHPC, which turns from a shifted ground state structure into a twisted excited state structure. Consequently, the intensity of the 0-0 transition cannot be observed experimentally due to small Franck-Condon factors and impurities of o-DHPC. In the present thesis, the structures and their changes due to excitation are explained by electrostatic potentials as well as antibonding (bonding) HOMO (LUMO) orbitals. Adiabatic excitation energies have been corrected by ZPEs and result in accuracies with errors smaller than 0.1 eV. Note that corrections on the B3LYP level worsen the results and one has to apply SCS-CC2 to achieve this accuracy. These calculations allow an interpretation of the experimental [1+1]REMPI spectra. Band progressions of the twist, shift and breathing of the [2.2]paracyclophane skeleton vibrations have been identified and show good agreement to the experiment. This work shows that the substitution pattern in [2.2]paracyclophanes can have a significant impact on spectroscopic properties. Because these properties are directly linked to the transport properties of these materials, the hereby gained insight can be used to design materials with customized transport properties. It was shown that the SCS-CC2 method is very appropriate to predict the interaction between the π-systems
In dieser Arbeit wurde das Dissoziationsverhalten kleiner organischer Kohlenwasserstoffradikale untersucht. Zum einen wurde die dissoziative Photoionisation des Allyl-, Propargyl- und Ethylradikals durch die Verbindung einer herkömmlichen, gepulsten Pyrolysequelle mit Synchrotronstrahlung untersucht. Zum anderen wurden von verschiedenen Propyl- und Butyl-Radikalisomeren die Raten des Wasserstoffverlustes bei Anregung mit 239 nm gemessen. Es konnte gezeigt werden, dass die Kombination einer gepulsten Radikalquelle mit Synchrotronstrahlung technisch umsetzbar ist. Der Vorteil dieser Methode liegt darin, dass es möglich ist, die Radikale über einen kontinuierlichen Energiebereich von mehreren eV innerhalb kurzer Zeit zu betrachten, was mit einem normalen Labor-Aufbau mit Farbstofflasern nicht möglich ist. So konnten anhand von Photoelektronenspektren und Photoionisationseffizienzkurven die Ionisierungsenergie des Allyl-, des Propargyl- und des Ethyl-Radikals in guter Übereinstimmung zu älteren Literaturdaten bestätigt werden. Anhand von Messungen zur dissoziativen Photoionisation konnte gezeigt werden, dass das Allyl und das Ethyl wie angenommen ein Wasserstoff-Molekül abspalten. Beim Allyl gibt es hierbei zwei mögliche Dissoziationsprodukte: das Cyclopropyl- und das Propargyl-Kation. Einfache RRKM-Rechnungen deuten darauf hin, dass bei geringen Überschussenergien das Cyclopropenyl-, bei größeren hingegen bevorzugt das Propargyl-Kation gebildet wird. Das Ethyl-System besitzt einen nicht-klassischen, überbrückten ionischen Zustand. Die dissoziative Photoionisation führt zum Vinyl-Kation und setzt bei deutlich höheren Energien ein, als von der Theorie vorhergesagt. Alle Erklärungsversuche sind unbefriedigend, daher sollten hier weitere experimentelle und theoretische Untersuchungen angeschlossen werden. Die dissoziative Photoionisation des Propargyl-Radikals besitzt, theoretischen Berechnungen zufolge, zwei konkurrierende Zerfallskanäle. Wie die Experimente jedoch zeigten, erfolgt nur die Abspaltung von H unter Bildung des Cyclopropenyliden-Kations im vorhergesagten Energiebereich. Der Konkurrenzprozess, Bildung von Propinyliden und H$_2$, setzt erst bei deutlich höheren Photonenenergien ein. Daneben konnte erstmals der Dreikörperzerfall des Propargylbromids und des Ethyliodids zum Propinyliden- respektive Vinyl-Kation beobachtet und die Auftrittsenergien bestimmt werden. Diese stimmen gut mit den thermochemischen Vorhersagen überein. In Zukunft ist geplant, mit ZEKE-Spektroskopie die Ionisierungsenergien der untersuchten Radikale exakt zu bestimmen. Insbesondere beim Ethyl-Radikal mit seinem nicht-klassischen Verhalten muss noch viel geklärt werden. Des Weiteren ist geplant, weitere Experimente am Synchrotron durchzuführen. Denkbar wäre hier, Ionen in definierten, schwingungsangeregten Zuständen zu erzeugen und an ihnen Ionen-Molekül-Reaktionen durchzuführen. Ausgehend von den jeweiligen Azoalkanen wurden die Wasserstoff-Disso"-zia"-tions"-raten der \n-Propyl-, \n-Butyl- und \sec-Butyl-Radikale bei einer Anregungswellenlänge von 239 nm gemessen. Ähnlich wie dies bereits bei früheren Messungen am \tert-Butyl- und Ethyl-Radikal der Fall war, waren diese Raten um 2--3 Größenordnungen schneller als von einfachen RRKM-Rechnungen vorhergesagt. %Eine mögliche Erklärung wäre ein konkurrierender %Deaktivierungskanal, z.B.\ der C--C-Bindungsbruch im Radikal. Da %jedoch der Wasserstoffverlust von einem der Spaltprodukte nicht in %einem Einphotonenprozess zu bewerkstelligen ist, muss dieser Kanal %ausgeschlossen werden. Ein anderer, noch sehr spekulativer %Erklärungsversuch geht von einem langlebigen 3p-Zustand, der ein %Minimum in der Geometrie mit einer verlängerten C--C-Bindung %darstellt, aus. Koppelt dieser Zustand mit dem darunterliegenden %3s-Zustand, kann es zur Deaktivierung kommen, jedoch nur, wenn die %Überschussenergie ausreichend groß ist. Dies würde das Verhalten der %Dissoziationsrate bei den Propyl- und Butyl-Radikalisomeren sowie dem %Ethylradikal erklären. Es wurde eine sehr spekulative Erklärung vorgestellt, die dieses Verhalten erklären könnte. Die vorliegenden Daten können diese Theorie aber weder bestätigen noch widerlegen. Es sieht jedoch so aus, als ob diese Diskrepanz zwischen Theorie und Experiment ein allgemeines Phänomen in Alkylradikalen darstellt. Um diese Theorie weiter zu erhärten, kann man einerseits noch weitere Alkylradikale untersuchen, ob sie ähnliche Differenzen zwischen Experiment und Theorie zeigen. Andererseits sollten auch bei den Propyl- und Butylradikalen Experimente mit unterschiedlichen Anregungswellenlängen durchgeführt werden um zu klären, ob sie sich analog zum \tert-Butyl- und Ethylradikal verhalten.
Die vorliegende Dissertation widmete sich der Aufklärung der Photodissoziationsdynamik der drei Xylyl-Radikale ortho-, meta- und para-Xylyl sowie des Benzyl-Radikals mit Hilfe des Velocity-Map-Imagings. Diese reaktiven Intermediate sind insbesondere im Bereich der Verbrennungschemie von hoher Relevanz, da sie die primären Zerfallsprodukte der Xylole und des Toluols darstellen, welche als Antiklopfmittel in Ottokraftstoffen Verwendung finden.Dementsprechend ist eine Betrachtung des weiteren Zerfalls dieser resonanz-stabilisierten Radikale, insbesondere unter dem Gesichtspunkt der Rußbildung, von entscheidender Bedeutung.
Für alle drei Xylyl-Radikale konnte eine selektive pyrolytische Generierung aus den entsprechenden 2-(Methylphenyl)ethylnitriten realisiert werden. Die isomerspezifische Identifikation erfolgte mit Hilfe von REMPI-Spektroskopie der jeweiligen D0 -> D3-Übergänge. Nachfolgend wurde die Photodissoziation aller drei Xylyl-Isomere nach Anregung des D3-Zustandes bei ca. 310 nm und nach Anregung der D-Bande bei 250 nm untersucht. Das „einfachste” Experiment stellte in diesem Zusammenhang die Photodissoziation des para-Xylyl-Radikals dar. Es konnte die von Hemberger et al. in thermischen Zerfallsexperimenten beobachtete Reaktion p-Xylyl -> p-Xylylen + H verifiziert werden. Die VMI-Experimente lieferten die Kennwerte <fT>(309.6nm) = 33 % und <fT>(250nm) = 19 % unter Erhalt isotroper Images für beide Anregungswellenlängen. Die dazugehörigen Dissoziationsratenkonstanten wurden zu kH(309.6nm) ≈ 10^8 s-1 und kH(250nm) ≈ 5*10^7 s-1 bestimmt. Es ist verblüffend, dass die Photodissoziation scheinbar bei der höheren Anregungswellenlänge von 309.6 nm (und somit bei geringerer Anregungsenergie) schneller verläuft als bei 250 nm. Darüber hinaus ist es nicht möglich, die beobachteten Raten mittels des statistischen Modells der RRKM-Theorie zu beschreiben. Des Weiteren konnten auch die Translationsenergieverteilungen nicht mit dem „Quack-Fit” für statistische Dissoziationen angefittet werden. Bei der Photodissoziation des para-Xylyl-Radikals liegt eine Dissoziation nach Rückkehr in den rovibronisch hochangeregten elektronischen Grundzustand infolge der Photoanregung vor. Hierbei thermalisiert die innere Energie im elektronischen Grundzustand vor der Dissoziation scheinbar nur teilweise, sodass keine vollständige statistische Verteilung dieser innerhalb des para-Xylyls gegeben ist. Da dies eine Grundvoraussetzung der gängigen statistischen Modelle darstellt, ist es nicht verwunderlich, dass keine quantitative Reproduktion der experimentellen Ergebnisse durch Anwendung dieser Modelle ermöglicht wird.
Bei entsprechenden Experimenten zum ortho-Isomer konnten diese statistischen Modelle ebenfalls nicht zur quantitativen Beschreibung der Dissoziation verwendet werden. Abermals wurde mit kH(311.1nm) ≈ 10^8 s-1 und kH(250nm) ≈ 5*10^7 s-1 eine schnellere Dissoziation bei geringerer Anregungsenergie festgestellt. Dies erscheint demnach charakteristisch für die Xylyl-Radikale. Innerhalb der VMI-Experimente wurden isotrope Verteilungen erhalten, deren Fragmenttranslationsenergieverteilung nach Anregung des D3-Niveaus bei 311.1 nm jedoch nicht durch die von Hemberger et al. beschriebene Hauptreaktion o-Xylyl -> o-Xylylen + H erklärt werden konnte. Eine Fragmentation nach o-Xylyl -> Benzocyclobuten + H konnte auf diesem Weg als Hauptdissoziationspfad identifiziert werden. Innerhalb der Studien von Hemberger et al. ist eine Reaktion zu Benzocyclobuten bei Anregung mit 311.1 nm energetisch nicht zugänglich. Mittels quantenchemischer Rechnung konnte jedoch ein bislang unbekannter, energetisch zugänglicher Reaktionspfad zur Bildung von Benzocyclobuten unter simultaner Ringschlussreaktion und Wasserstofffragmentation identifiziert und charakterisiert werden. Die Kennwerte der Photodissoziationsreaktion des ortho-Xylyls konnten hierdurch zu <fT>(311.1nm) = 30 % und <fT>(250nm) = 16 % bestimmt werden. Wie bereits im Fall des para-Isomers liegt die Vermutung nahe, dass es sich um eine Dissoziation aus dem rovibronisch hoch-angeregten elektronischen Grundzustand handelt, welcher nicht vollständig vor der Fragmentation thermalisiert.
Im Rahmen der Experimente zum letzten der drei Xylyl-Isomere, dem meta-Xylyl-Radikal, konnte mit VMI eine Fragmentation nach m-Xylyl -> m-Xylylen + H als Hauptdissoziationpfad ausgeschlossen werden. Innerhalb der Experimente nach Anregung des D3-Niveaus um 310 nm konnten mit para-Xylylen und Benzocyclobuten zwei Reaktionsprodukte festgestellt werden, welche die erhaltene Translationsenergieverteilung erklären könnten, wobei die entsprechende maximale Überschussenergie einer Fragmentation zu para-Xylylen den Nullabfall der Verteilung geringfügig besser widerspiegelt. Die mittlere Fragmenttranslationsenergie liegt mit <fT>(p-Xylylen) = 29 % respektive <fT>(Bcb) = 25 % leicht unterhalb der entsprechenden Kennwerte der para- beziehungsweise ortho-Xylyl Experimente. Durch die nötige, der Dissoziation vorausgehende Isomerisierung scheint ein höherer Thermalisierungsgrad der Schwingungs- und Rotationsenergie innerhalb des elektronischen Grundzustands erreicht zu werden, aus welchem die geringen <fT>-Werte resultieren könnten. Der Effekt verminderter <fT>-Werte wurde in den Experimenten bei 250 nm nicht gefunden (<fT>(p-Xylylen) = 19 % respektive <fT>(Bcb) = 17 %). Vergleicht man an dieser Stelle die <ET>- anstelle der <fT>-Werte (<ET>(para) = 0.41 eV, <ET>(ortho) = 0.38 eV, <ET>(meta) = 0.41 eV), stellt man fest, dass <ET>(meta) = <ET>(para) gilt und somit ein weiteres Indiz dafür gefunden wurde, dass eine Umlagerung zu para-Xylyl mit anschließender Fragmentation zu para-Xylylen möglicherweise gegenüber jener zum ortho-Isomer mit nachfolgender Bcb-Bildung bevorzugt ist. Dies würde darüber hinaus im Einklang mit den Studien von Hemberger et al. stehen, in welchen beim thermischen Zerfall des meta-Xylyls para-Xylylen als alleiniges Fragmentationsprodukt gefunden wurde. Eine Betrachtung der Umlagerung mittels RRKM wies jedoch keinen bevorzugten Isomerisierungspfad aus. Schlussendlich lässt sich aufgrund der ermittelten Ratenkonstanten (kH(310nm) ≈ 10^8 s-1, kH(250nm) ≈ 4*10^7 s-1) sowie den <fT>-Werten vermuten, dass die Isomerisierung langsamer als die Dissoziation bei 310 nm verläuft, jedoch zumindest auf einer ähnlichen Zeitskala wie die entsprechende Dissoziation nach Anregung bei 250 nm. Eine zweifelsfreie Interpretation der meta-Xylyl Experimente gestaltet sich jedoch als schwierig.
Innerhalb der Studien zur Photodissoziation des Benzyl-Radikals konnten literaturbekannte Daten zur Fragmentation nach Anregung um 250 nm in guter Übereinstimmung reproduziert werden. Die experimentellen Daten zur Untersuchung der Photodissoziation nach Anregung des D3-Niveaus konnten jedoch nicht eindeutig interpretiert werden. Die literaturbekannte Lage des D3-Niveaus bei 305.3 nm konnte mittels REMPI-Spektroskopie reproduziert werden und anschließende 1H-Photofragmentspektren zeigten, dass eine Anregung des D3-Niveaus zur Bildung von Wasserstofffragmenten führt. Die beobachteten 1H-Fragmente zeigten jedoch eine deutlich zu hohe Überschussenergie für eine Einphotonenabsorption, sodass diese Mehrphotonenabsorptionen zugeordnet werden müssen. Es lässt sich vermuten, dass die Wasserstofffragmente aus einer Anregung eines „superexcited states” oberhalb des Ionisationspotentials, wahrscheinlich durch Zweiphotonenabsorption, stammen. Dieser „superexcited state” zeigt scheinbar keine (vollständige) Autoionisation und führt nachfolgend zumindest teilweise zur Fragmentation des Benzyl-Radikals. In der Folge liegt die Vermutung nahe, dass die Energien eines einzelnen 305 nm-Photons nicht zur Initiierung einer Photodissoziation des Benzyl-Radikals ausreichend ist oder aber, dass diese Photodissoziation zu langsam ist, um sie in einem VMI-Experiment zu beobachten. Potential für weitere Experimente zur Photodissoziation des Benzyl-Radikals nach Anregung des D3-Niveaus wird an dieser Stelle nicht gesehen.
Die vorliegenden Arbeit behandelt VUV Valenz-Photoionisations-Experimente in der Gasphase. Zunächst wird die Photoionisation von stickstoffhaltigen Radikalen und deren Pyrolyseprodukten untersucht. Im Anschluss werden molekulare Biradikale betrachtet. Da in der Literatur bislang nur wenige solcher Biradikale als Intermediate experimentell zugänglich waren, war es das Ziel dieser Arbeit, neue reaktive Spezies dieser Substanzklassen in der Gasphase zu isolieren und deren Struktur, Eigenschaften und Reaktivität besser zu verstehen. Im Mittelpunkt stehen dabei Intermediate, die als echte Biradikale, Biradikaloide oder Triplett Carbene auftreten. Zu letzteren zählen das Methylbismut sowie die Pentadiinylidene. Biradikale bilden in Verbrennungsprozessen sehr effizient Ruß(vorläufer), was anhand des ortho-Benz-ins dargelegt wurde, indem dessen Pyrolyseprodukte charakterisiert und mögliche PAH-Bildungswege aufgezeigt wurden. Vakuum Flash Pyrolyse wurde verwendet, um in situ aus den geeigneten Vorläufermolekülen die radikalischen und biradikalischen Intermediate zu erzeugen. Während für biradikalische Zwischenstufen meist spezielle Verbindungen als Vorläufer synthetisiert werden müssen, waren die verwendeten Vorläufer für die stickstoffhaltigen Radikale kommerziell erhältlich. Die reaktiven Spezies wurden alle mittels monochromatischer VUV Synchrotronstrahlung an der Swiss Light Source in Villigen/ Schweiz ionisiert. Die Ionisationsereignisse wurden mit der Schwellenphotoelektronen-Photoionen-Koinzidenz (TPEPICO) Technik detektiert und ausgewertet. Anhand der resultierenden massenselektiven Schwellenphotoelektronenspektren wurden die Ionisierungsenergien der (Bi)radikale bestimmt und die Schwingungsstruktur der jeweiligen Kationen analysiert. Die erhaltenen Spektren und Daten wurden in Zusammenarbeit mit der theoretischen Chemie interpretiert.
Wichtige Erkenntnisse
• Es wurde die Ionisierungsenergie der 2-, 3- und 4-Picolylradikale auf 7.70\pm
0.02 eV, 7.59\pm
0.01 eV und 8.01\pm
0.01 eV bestimmt. Diese wurden in der Pyrolyse selektiv aus ihren zugehörigen Picolylaminen erzeugt. Zudem wurde analog zum Benzyl-Radikal für alle drei Radikale eine ausgeprägte Schwingungsprogression ermittelt, die der totalsymmetrischen Deformationsmode des aromatischen Rings entspricht.
• Die Picolyl-Radikale dissoziieren in der Pyrolyse thermisch zu weiteren Produkten. Die Fragmentierung verläuft dabei isomerenunabhängig über ein stickstoffhaltiges Siebenringintermediat, dem Azepinyl-Radikal. Der Fragmentierungsmechanismus wurde mit dem von Benzyl verglichen. Die gewonnenen Erkenntnisse haben Relevanz für Verbrennungsprozesse, beispielsweise von Biokraftstoffen.Im ersten Schritt entstehen vier Isomere, das Cyclopenta-1,4-dien-1-carbonitril, das Cyclopenta-1,3-dien-1-carbonitril, das 2-Ethynyl-1H-pyrrol und das3-Ethynyl-1H-pyrrol mit den zugehörigen Ionisierungsenergien von 9.25\pm
0.02 eV, 9.14\pm
0.02 eV, 7.99\pm
0.02 eV und 8.12\pm
0.02 eV. Durch einen zweiten H-Verlust konnte das Cyanocyclopentadienyl-Radikal mit einer Ionisierungsenergie für die zwei niedrigsten Zustände im Kation mit 9.07\pm
0.02 eV (T0) und 9.21\pm
0.02 eV (S1) untersucht werden. Weitere Pyrolyseprodukte, deren Ionisierungsenergien bereits literaturbekannt sind und die bestätigt wurden, sind das Cyclopentadienyl-Radikal, das Cyclopenta-1,3-dien, das Propargyl-Radikal, das Penta-1,3-diin und das Cyanopropenyl.
• Das ortho-Benz-in wurde pyrolytisch aus dem selbst synthetisierten Benzocyclobutendion erzeugt und ein Schwellenphotoelektronenspektrum frei von Störsignalen konnte aufgenommen werden. Mit Hilfe von Rechnungen aufCASPT2(11,14) Niveau, die neben dem elektronischen Übergang in den kationischen Grundzustand noch die Übergänge in zwei weitere angeregte kationische Zustände beinhalten, wurde die Ionisierungsenergie im Vergleich zu früheren Experimenten auf 9.51 eV revidiert. Eine verdrillte Geometrie für den kationischen Grundzustand konnte erstmals nachgewiesen werden. Zusätzlich wurden die offenkettigen Isomere cis- und trans-Hexa-1,5-diin-3-en im Spektrum detektiert und zugeordnet.
• Die Auftrittsenergien aus der DPI des Vorläufermoleküls Benzocyclobutendion betragen für den ersten CO-Verlust 9.62\pm
0.05 eV und für den zweiten CO-Verlust 12.14\pm
0.10 eV. Damit konnte über einen thermochemischen Kreisprozess eine Bindungsdissoziationsenergie für die Ph-CO Bindung im Benzoylkation von 2.52 eV berechnet werden.
• Verschiedenen Pyrolyseprodukte des ortho-Benz-ins, wie Ethin, Buta-1,3-diin, Benzol, Biphenylen und 2-Ethinylnaphthalin, werden entweder in bimolekularen Reaktionen gebildet oder ortho-Benz-in fragmentiert unimolekular zu diesen. Die beiden kompetitiven Reaktionspfade tragen zur PAH-Bildung des ortho-Benz-ins bei.
• Die Triplett-Carbene Pentadiinyliden, Methylpentadiinyliden und Dimethylpentadiinyliden wurden als Pyrolyseprodukt aus ihren zugehörigen Diazovorläufern identifiziert und die Ionisierungsenergien mit 8.36\pm
0.03 eV, 7.77\pm
0.04 eV und 7.27\pm
0.06 eV bestimmt. Jede Methylierung stabilisiert folglich das Carben. Zusätzlich konnte ein weiteres C5H2 Isomer, das 3-(Didehydrovinyliden)cyclopropen, mit einer Ionisierungsenergie von 8.60\pm
0.03 eV charakterisiert werden.
• Zwei bismuthaltige, reaktive Spezies, das Dimethylbismut-Radikal\cdot
BiMe2 (IE = 7.27\pm
0.04 eV) und das Methylbismut-Carben :BiMe(IE = 7.88\pm
0.02 eV) wurden als Pyrolyseprodukte aus dem BiMe3 identifiziert. Beide Verbindungen zeigen eine ausgeprägte Schwingungsstruktur, die der Bi-C Streckschwingung zugeordnet wurde. Weiterhin wurden elementares Bismut Bi und das Bismut-Dimer Bi2 nachgewiesen.
• Die homolytische Dissoziation der ersten Me2Bi-CH3 Bindung im BiMe3 wurde untersucht und eine BDE von 210\pm
7 kJ/ mol bestimmt. Sie liegt um +15 % bzw. +28 kJ/ mol über dem aus der Literatur abgeschätzten Wert.
Die vorliegende Dissertation untersucht reaktive Intermediaten, speziell Radikale und Carbene und deren Verhalten bei Photoionisation mit VUV-Synchrotronstrahlung. Diese instabilen Verbindungen wurden durch Pyrolyse von teils selbstsynthetisierter Vorläufern in einem kontinuierlichen Molekularstrahl erzeugt und mittels der TPEPICO-Spektroskopie untersucht. Die wichtigsten Ergebnisse dieser Arbeit werden im Anschluss hervorgehoben. Drei Radikale der Zusammensetzung C9H7, Indenyl, 1- und 3-Phenylpropargyl wurden aus ihren bromierten Vorläufern synthetisiert und ihre Ionisierungsenergien bestimmt. Die Frage ob es möglich ist alle drei Radikale hinsichtlich ihrer IE zu unterscheiden und dadurch eine Identifikation in einer Flamme möglich wird, konnte beantwortet werden. Indenyl und 3-Phenylpropargyl besitzen Ionisierungsenergien von 7.53 und 7.20 eV, was eine Erkennung in Flammen prinzipiell möglich macht. Für 1-Phenylpropargyl wurde eine IEad von 7.4 eV gemessen, was eine selektive Identifikation erschwert. Die Messwerte wurden durch quantenchemischen Rechnungen überprüft und sind mit diesen in guter Übereinstimmung. Die Photoionisation von Cyclopropenyliden (IEad = 9.17 ± 0.015 eV) wurde untersucht,wobei eine niederenergetische Bande dem Propargylen (IEad = 9.02 ± 0.02 eV), dem HCCCH Isomer der Zusammensetzung C3H2, zugeordnet werden konnte. Die Schwingungsstruktur des Spektrums konnte erfolgreich simuliert und dadurch die Geometrie des Kations ermittelt werden. Als Nebenprodukt im Molekularstrahl wurde Chlorcyclopropenyliden (IEad = 9.17 ± 0.02 eV) durch seine Schwingungsprogression identifiziert. Die Analyse der dissoziativen Photoionisation gestaltet sich als schwierig, da sowohl c-C3H2 als auch c-C3HCl im relevanten Energiebereich fragmentieren können und die Anwesenheit von HCl die Auswertung ebenfalls erschwert. Ein Lösungsvorschlag für dieses Problem wurde ebenfalls aufgezeigt. Der Einfluss von Substitutionen auf die IE wurde am Beispiel des Propargylradikals und seiner zwei bromierten Analoga erforscht. Dabei wurde eine Rotverschiebung (IEad(C3H3) = 8.71 ± 0.02 eV / IEad(BrCCCH2) = 8.16 ± 0.02 eV / IEad(BrHCCCH) = 8.34 ± 0.02 eV) gemessen. Diese ist auf den elektronenspendenden Charakter des Broms begründet. Beide Brompropargylradikale lassen sich anhand ihrer IE unterscheiden. Die Schwelle zur dissoziativen Photoionisation von C3H2Br zu C3H2 wurde mit 10.1 eV ermittelt, wobei verschiedene Kanäle für diese Reaktion in Frage kommen. Schwingungsaktivität konnte im TPE-Spektrum des Propargylradikals ebenfalls verzeichnet und die v3 +-Mode mit 1950 cm-1 ermittelt werden. Als letztes Projekt stand die Photoionisation des t-Butyl im Fokus, da teils widersprüchliche Messwerte für die IEad in der Literatur publiziert sind. Es konnte ein Wert von 6.75 eV ± 0.03 eV gemessen werden. Die Schwierigkeit bei diesem Experiment ist die Geometrieänderung während der Ionisierung, da das Radikal pyramidal und das Kation eine planare Struktur im C-Gerüst besitzt. Die Grenzen der angewendeten Methoden wurden an diesem Beispiel deutlich gemacht. Zur vollständigen Charakterisierung wurden auch die Vorläufer genau analysiert, da diese durch dissoziative Photoionisation (DPI) Fragmentionen bilden, welche die gleiche Masse besitzen wie die zu untersuchenden Radikale und Carbene. Aus diesen Ergebnissen konnten Bindungsenergien berechnet werden. Von allen untersuchten reaktiven Intermediaten konnten die Ionisierungsenergien mit einer Genauigkeit von ± 20 meV ermittelt werden. Es wurde gezeigt, dass sogar Isomere mit gleicher Molekülmasse unterscheidbar sind. Diese Daten lassen sich verwenden um reaktive Zwischenprodukte in Flammen zu identifizieren. Die Identifizierung ermöglicht es dann geeignete Modelle für Verbrennungsprozesse zu konstruieren oder vorhandene zu verbessern. Diese könnten wiederum helfen die Ruß- und PAK-Bildung besser zu verstehen. Die Ziele dieser Dissertation konnten somit erreicht werden. Massenspektren, welche in Flammen durch VUV-Synchrotronstrahlung aufgenommen wurden, beherbergen eine große Fülle an größeren reaktiven Intermediaten wie beispielsweise das Fluorenyl oder das Biphenylmethylradikal. Deren Ionisation ist bislang nur sehr vage erforscht und wäre deshalb ein interessantes Projekt um diese Arbeit fortzuführen.
The studies presented in this thesis deal with resonant and non-resonant excitation of free variable size clusters using synchrotron radiation in the soft X-ray regime. The post collision interaction (PCI) effect is investigated in free variable size krypton and argon clusters near the Kr 3d and Ar 2p ionization energies. The core ionization energies of surface and bulk sites in variable size clusters can be clearly distinguished. This is mostly due to the polarization screening. It is found that the asymmetry, which is a consequence of PCI, is characteristically smaller for clusters than for isolated atoms. Moreover, there is less asymmetry for bulk sites than for surface sites in variable size rare gas clusters. We assign the results in terms of mechanisms that are based on quantum mechanical models of post collision interaction. Complementary experiments on the photoionization of free van der Waals clusters are performed by using zero kinetic energy (ZEKE) photoelectron spectroscopy in the Ar 2p-, Kr 3d-, Ne 1s-, and N2-regimes. The experimental approach is also suitable to detect cluster size dependent changes in electronic structure. This also allows us to study post collision interaction in variable size clusters. The parameters of the PCI profiles deduced for ZEKE experiments indicate that there are no significant changes in core ionization dynamics compared to near-threshold experiments. Results from model calculations in Kr 3d ionization energy indicate that different geometric sites can be clearly distinguished from each other by their substantial shift in Kr 3d ionization energy, though the dimer shows almost the same Kr 3d ionization energy as the free atom. A comparison with the experimental results indicates that there is resemblance with the model calculations, even though close-lying ionization energies are blended and require deconvolutions of the experimental spectra. It is evident from the present work that one can observe distinct shifts in core ionization energies in van der Waals clusters that are formed in wide size distributions of a jet expansion. The emission of ultraviolet fluorescence radiation from variable size argon clusters is investigated with high spectral resolution in the Ar 2p-excitation regime. The fluorescence excitation spectra reveal strong fluorescence intensity in the Ar 2p-continuum, but no evidence for the occurrence of discrete low-lying core-exciton states in the near-edge regime. This finding is different from the absorption and photoionization cross sections of argon clusters and the solid. The dispersed fluorescence shows a broad molecular band centered near 280 nm. The present results are consistent with the formation of singly charged, excited moieties within the clusters, which are assigned as sources of the radiative relaxation in the 280 nm regime. A fast energy transfer process (interatomic Coulombic decay, ICD) is assigned to be primarily the origin of these singly charged, excited cations besides intra-cluster electron impact ionization by Auger electrons. Our findings give possibly the first experimental evidence for ICD in the core level regime. Free, variable size nitrogen clusters are investigated in the N 1s excitation regime in comparison with the free molecule and solid nitrogen. The conversion of Rydberg states into core excitons, surface and bulk, was studied. The experimental results are simulated by ab initio calculations using (N2)13 as a reasonable prototype cluster structure that allows us to simulate both surface and bulk properties in comparison with the isolated molecule. The present results clearly show that there are specific properties, such as molecular orientation, in molecular van der Waals clusters, which do not exist in atomic van der Waals clusters. It is shown that inner and outer surface sites give rise to distinct energy shifts of the low lying surface core excitons.
The photoionization of several nitrogen-containing reactive intermediates relevant in combustion processes was investigated in the gas phase employing VUV synchrotron radiation. The intermediates were either freshly prepared and stored under cryogenic temperatures during the experiment or generated in situ by vacuum flash pyrolysis of suitable precursor molecules. The iPEPICO (imaging photoelectron photoion coincidence) setups of the VUV beamlines at the Swiss Light Source and Synchrotron SOLEIL were then used to record mass-selected threshold photoelectron (TPE) spectra. TPE spectra reveal the ionization energy and vibrational structure in the cationic states can often be resolved, which enables to distinguish different isomers. Accurate ionization energies for the radicals carbonyl amidogen, pyrrolyl, and 3-picolyl, and for the closed shell molecules isocyanic acid and cyanovinylacetylene were obtained. The analysis of the dissociative photoionization of the pyrolysis precursors enables in some cases to retrieve thermochemical data. Beyond, the absolute photoionization cross section of the cyclic carbene cyclopropenylidene was determined, NEXAFS and normal Auger spectra of isocyanic acid were recorded and analyzed at the O1s, N1s, and C1s edges, and the dissociative photoionization and pyrolysis of 1,4-di-tert-butyl-1,4-azaborinine was studied.
This thesis includes measurements that were recorded by cooperation partners. The EPR spec‐ trosa mentioned in section 5.2 were recorded by Michael Auth from the Dyakonov Group (Ex‐ perimental Physics VI, Julius‐Maximilians‐Universität, Würzburg). The TREFISH experiments and transient absorption in section 5.4 spectra were performed by Jašinskas et al. from the V. Gulbi‐ nas group (Center for Physical Sciences and Technology, Vilnius, Lithuania). This dissertation investigated the interactions of semiconducting single‐walled carbon nanotubes (SWNTs) of (6,5) chirality with their environment. Shear‐mixing provided high‐quality SWNT sus‐ pensions, which was complemented by various film preparation techniques. These techniques were in turn used to prepare heterostructures with MoS2 and hBN, which were examined with a newly constructed photoluminescence microscope specifically for this purpose. Finally, the change of spectral properties of SWNTs upon doping was investigated in more detail, as well as the behaviour of charge carriers in the tubes themselves. To optimise the SWNT sample preparation techniques that supplied the other experiments, the sample quality of shear‐mixed preparations was compared with that of sonicated samples. It was found that the quantum efficiency of sheared suspensions exceeds that of sonicated suspensions as soon as the sonication time exceeds 30 min. The higher PLQY is due to the lower defect concentration in shear‐mixed samples. Via transient absorption, a mean lifetime of 17.3 ps and a mean distance between defects of 192.1 nm could be determined. Furthermore, it was found that the increased efficiency of horn sonication is probably not only due to higher shear forces acting on the SWNT bundles but also that the shortening of PFO‐BPy strands plays a significant role. Sonication of very long polymer strands significantly increased their effectiveness in shear mixing. While previous approaches could only achieve very low concentrations of SWNTs in suspensions, pre‐sonicated polymer yielded results which were comparable with much shorter PFO‐BPy batches. Reference experiments also showed that different aggregation processes are relevant during production and further processing. Initial reprocessing of carbon nanotube raw material requires 7 h sonication time and over 24 h shear mixing before no increase in carbon nano concentration is detectable. However, only a few minutes of sonication or shear mixing are required when reprocessing the residue produced during the separation of the slurry. This discrepancy indicates that different aggregates are present, with markedly different aggregation properties. To study low‐dimensional heterostructures, a PL microscope was set up with the ability to ob‐ serve single SWNTs as well as monolayers of other low‐dimensional systems. Furthermore, sam‐ ples were prepared which bring single SWNTs into contact with 2D materials such as h‐BN andMoS2 layers and the changes in the photoluminescence spectrum were documented. For h‐BN, it was observed whether previous methods for depositing SWNTs could be transferred for photo‐ luminescence spectroscopy. SWNTs were successfully deposited on monolayers via a modified drip coating, with the limitation that SWNTs aggregate more at the edges of the monolayers. Upon contact of SWNTs with MoS2, significant changes in the emission properties of the mono‐ layers were observed. The fluorescence, which was mainly dominated by excitons, was shifted towards trion emission. Reference experiments excluded PFO‐BPy and toluene as potential causes. Based on the change in the emission behaviour of MoS2, the most plausible explanation is a photoinduced charge transfer leading to delocalised charge carriers on MoS2. In contrast, on SWNTs, the introduction of additional charges would constitute a quenching centre, which would quench their PL emission, making them undetectable in the PL image. In the last chapter, the electronic properties of doped SWNTs and the behaviour of charge carri‐ ers inside the tubes should be investigated. First, the change in the conductivity of SWNT films with increasing doping levels was docu‐ mented. The resistance of the films drops drastically at minimum doping. After the initial in‐ troduction of charges, the resistance drops with increasing dopant concentration according to a double logarithmic curve. The initial drop could be due to a reduction of contact resistances within the SWNT network film, but this could not be further investigated within the scope of this PhD thesis. In cooperation with Andreas Sperlich and Michael Auth, the spin concentration of SWNTs at different doping levels was determined. The obtained concentrations were compared with the carrier concentrations determined from PL and absorption spectra. At low spin densities, good agreement with previous models was found. Furthermore, the presence of isolated spins strongly suggests a localised charge carrier distribution at temperatures around 10 K. When the charge density is increased, the spin density deviates significantly from the charge carrier con‐ centration. This discrepancy is attributed to the increasing delocalisation of charge carriers at high charge densities and the interactions of neighbouring spins. These results strongly indicate the existence of localised charge carriers in SWNTs at low temperatures. Next, the effect of doping on the Raman spectra of SWNT suspensions was investigated. In gen‐ eral, doping is expected to reduce the intensity of the Raman bands, i.e. a consequence of the reduced resonance gain due to bleaching of the S2 transition. However, similar to the resistivity measurements, the oscillator strength of the G+ band drops sharply in the first doping steps. It was also found that the G+ band decreases more than would be expected due to loss of reso‐ nance condition. Furthermore, the G‐ is bleached faster than the G+ band. All these anomalies suggest that resonance enhancement is not the only relevant effect. Another much faster deac‐ tivation path for the excitons may be introduced by doping. This would leave less time for the scattering process to occur and reduce the oscillator strength of the Raman bands. In cooperation with Vidmantas et al., the photoinduced charge carrier behaviour of SWNT/PCBM films was investigated. The required films were prepared by drop coating. The SWNT suspen‐ sions required for this were obtained from sheared SWNT preparations. Using transient absorp‐ tion and TREFISH, a number of charge transfer effects were identified and their dynamics in‐ vestigated: the recombination of neutral excitons (< 50 ps), the electron transfer from carbon nanotubes to PCBM molecules (< 1 ps), the decay of charge‐transfer excitons (∼200 ps), the recombination of charge carriers between charge‐transfer excitons (1 ns to 4 ns) and finally the propagation through the SWNT network (∼20 ns)
In dieser Arbeit werden die Wechselwirkungen zwischen der Oberfläche von Kohlenstoffnanoröhren und verschiedenen Dispergierreagenzien anhand der Photolumineszenz (PL) der (6,5)-Nanoröhren untersucht. Um den Einfluss der verschiedenen Reagenzien auf die exzitonischen Eigenschaften und die PL-Emission zu quantifizieren, wurden die Dispergierreagenzien ausgetauscht, die Temperaturabhängigkeit bestimmt und die Konzentration der Reagenzien variiert.
Die Dispergierreagenzien eines immobilisierten, SC-stabilisierten (6,5)-SWNT-Ensembles wurden im Mikrofluidikkanal ausgetauscht. Wird der Kanal mit Wasser gespült, verringern sich die PL-Intensität und die Emissionsenergie, da der Wasserfluss die Tensidmoleküle von der Oberfläche entfernt. Beim Austausch einer DOC-Umgebung gegen Wasser nimmt die PL-Intensität ebenfalls ab und die PL-Emissionsenergie verringert sich. Die Austauschexperimente verlaufen reversibel und der instantane Anstieg der Emissionsenergie bei der Tensidadsorption weist auf eine kooperative Anlagerung hin. Deshalb ist anzunehmen, dass sich Tensid-SWNT-Heteromizellen ausbilden.
Anschließend werden die Emissionsenergie und die PL-Intensität in verschiedenen Dispergierreagenzien und in Wasser verglichen. Die größte Emissionsenergie und PL-Intensität werden während des Wechsels von einer SDS- zu einer (GT)16-Lösung gemessen. Dies kann auf die lückenlose Bedeckung der SWNT-Oberfläche mit einer heterogenen Schicht aus SDS-Molekülen und (GT)16-Strängen zurückgeführt werden. In reiner SDS-Umgebung emittieren die Nanoröhren Licht mit der zweithöchsten Energie, aber die PL-Intensität liegt unter der in einer SC-Umgebung. Die Emissionsenergie in der SC-Umgebung ist geringer und davon abhängig, ob die SWNTs bereits mit (GT)16-Strängen stabilisiert waren, da dies eine permanente Rotverschiebung der Emissionsenergie in der SC-Umgebung sowie eine verringerte PL-Intensität verursacht. In wässriger Umgebung verringert sich nach erfolgtem (GT)16-Kontakt die PL-Intensität dauerhaft.
Danach wurde die Anlagerung von Tensidmolekülen an die (6,5)-SWNT-Oberfläche in Suspensionen mit der Temperatursprungmethode untersucht. Die Temperatur im Mikrofluidikkanal wurde anhand der linearen Abnahme der Emissionsenergie SC- und DOC-stabilisierter SWNTs mit steigender Temperatur bestimmt. Die Suspensionstemperatur ist in den verschiedenen Temperatursprungexperimenten unabhängig von der Messposition im Mikrofluidikkanal und wird durch die absolute Position auf den Peltier-Elementen bestimmt. Zudem stimmen die im Kanal gemessenen Temperaturen für SC- und DOC-stabilisierte (6,5)-SWNTs überein, weshalb in diesem Experiment nicht die erwartete Einstellung eines Gleichgewichts wie in einem Temperatursprungexperiment der Fall, sondern die Momentantemperatur gemessen wird.
Die schnelle Gleichgewichtseinstellung zwischen freien und auf der SWNT-Oberfläche adsorbierten Tensidmolekülen beim Temperatursprung zeigt, dass die SC- und DOC-(6,5)-SWNT-Suspensionen thermochrome Farbstoffe sind. Wegen der Temperaturabhängigkeit der Emissionsenergie ist es bei wissenschaftlichen Arbeiten wichtig, neben dem verwendeten Dispergierreagenz auch die Temperatur der SWNT-Suspension anzugeben.
Abschließend wurden die kritischen Mizellenkonzentrationen von Tensid-SWNT-Suspensionen in Verdünnungsexperimenten und daraus die thermodynamischen Bildungsparameter der Tensid-SWNT-Heteromizellen ermittelt. In der temperaturabhängigen Analyse der SC-SWNT-Mizellenbildung wird ein konstanter Hill-Koeffizient erhalten, der die Mizellenbildung als positiv kooperativ klassifiziert. Für die Bestimmung der Freien Mizellierungsenthalpie wurden nur die CMCs aus den Verdünnungsexperimenten verwendet, da die Mizellenbildung bei der Aufkonzentration teils kinetisch gehemmt ist. Da die Freie Mizellierungsenthalpie bei allen Temperaturen negativ ist, stabilisiert die Bildung der Heteromizellen das System. Die Triebkraft für die Mizellenbildung ist über 322 K die Enthalpie, während unterhalb von 316 K der Entropiegewinn dominiert. Die Verdünnung einer DOC-SWNT-Suspension zeigt keine Änderung der Emissionsenergie, obwohl dabei sowohl die primäre als auch die sekundäre CMC von DOC unterschritten werden.
Zuletzt wurden die Verdünnungsexperimente mit einer SDS-SWNT-Suspension durchgeführt und die thermodynamischen Parameter der Mizellenbildung bestimmt. Da auf die Auflösung der Mizellenstruktur direkt die Aggregation der SWNTs folgt, wurde für die Ermittlung der CMC näherungsweise die Konzentration am Maximum der Emissionsenergie verwendet. Daraus ergibt sich bei jeder Temperatur eine negative Freie Mizellierungsenthalpie, deren Beiträge analog zu SC bei kleineren Temperaturen als 323 K entropisch und bei höheren Temperaturen enthalpisch dominiert werden.
Somit ermöglichen die Experimente mit SC- und SDS-SWNT-Suspensionen die temperaturabhängige Bestimmung der CMC und damit die Berechnung der Freien Mizellierungsenthalpie sowie der zugehörigen enthalpischen und entropischen Beiträge.
Im Rahmen dieser Dissertation wurden optische Eigenschaften von halbleitenden, einwandigen Kohlenstoffnanoröhren (SWNTs) der (6,5)-Chiralität untersucht. Dies gelang durch Ensemblemessungen aber vor allem durch den Aufbau eines Mikroskops zur Messung an einzelnen SWNTs. Dieses Einzel- SWNT-Mikroskop ermöglichte nebst „normaler“ Bildgebung durch Sammlung und Abbildung der nahinfraroten Photolumineszenz (PL) der (6,5)-SWNTs auch die spektral- und zeitaufgelöste Untersuchung der PL. Durch Verwendung von Dichtegradientenultrazentrifugation (DGU) zur chiralen Aufreinigung des SWNT-Rohmaterials konnten alle Messungen unter Minimierung des störenden Einflusses von Aggregaten oder SWNTs anderer Chiralität durchgeführt werden. Untersucht und bestimmt wurde der Absorptionsquerschnitt und die Exzitonengröße, die PL-Eigenschaften aggregierter SWNTs und der Einfluß der Permittivität auf die PL einzelner SWNTs.
Im Rahmen der vorliegenden Dissertation wurden die Dynamiken von strahlungslosen Deaktivierungsprozessen von vier verschiedenen Molekülen im elektronisch angeregten Zustand untersucht. Ein fundiertes Verständnis der intramolekularen Energieumverteilung in isolierten pi-konjugierten Systemen ist neben dem Modellcharakter auch für Anwendungen in der organischen Elektronik von Interesse. Die Untersuchungen dienen zudem als optimaler Maßstab für theoretische Simulationen, die auf eine Nachbildung der molekularen Dynamik ausgerichtet sind.
Die Inbetriebnahme des Pikosekunden-Lasersystems stellt in der Arbeitsgruppe ein großes Potential für die Untersuchung der Dynamik von isolierten pi-konjugierten Molekülen zur Verfügung. Erste Experimente konnten an unterschiedlichen Heterocyclen mit interessantem zeitlichen Verhalten erfolgreich durchgeführt werden und lieferten bereits wichtige Erkenntnisse über die strahlungslose Deaktivierung auf der ps-Zeitskala. Selbst für große Moleküle mit geringem Dampfdruck, die nur mit hohem experimentellen Aufwand im isolierten Zustand charakterisierbar sind, konnten Relaxationszeiten der angeregten Zustände ermittelt werden.
Der Fokus der einzelnen Studien lag in der Erforschung der isolierten Moleküle, welche durch Anwendung der Molekularstrahl-Technik mit zeitaufgelöster REMPI-Spektroskopie anhand des ps-Systems untersucht werden sollten. Zur Kontrolle der experimentellen Ergebnisse wurden zudem Vergleichsmessungen der transienten Absorptionsspektroskopie (TA) in der Flüssigphase herangezogen, wodurch eine fundierte Interpretation der Dynamik möglich wurde. Zu den wichtigen Zielen gehörten jedoch die Vergleiche der experimentellen Ergebnisse von isolierten Molekülen mit Berechnungen der Zustandsenergien sowie Simulationen der Moleküldynamik aus dem Theorie-Arbeitskreis von Prof. Mitric. Auf diese Weise konnten wichtige Erkenntnisse über die Dynamik der Deaktivierungsprozesse gewonnen werden.
Die Kombination der Gasphasen-Experimente mit TA-Messungen in der Flüssigphase hat sich als besonders nützlich erwiesen, um bei mehrstufigen Deaktivierungsprozessen einen erweiterten Einblick in die Dynamik der Moleküle zu erhalten.
- So konnte bei Fluorenon in Cyclohexan und Acetonitril durch Vergleich der Anregungen des S3- und S1-Zustands eine zusätzliche Zeitkonstante von 8-16 ps beobachtet werden, welche die innere Umwandlung zum S1-Zustand dokumentiert und die Ergebnisse der Gasphasen-Messungen bestätigt.
- Durch Verwendung von Lösungsmitteln unterschiedlicher Polarität und der damit verbundenen Verschiebung der elektronischen Zustände von Fluorenon konnte zudem der zweite Deaktivierungsprozess eindeutig einem ISC-Prozess mit Zeitkonstanten von 120-154 ps zugeordnet werden. In der Gasphase wurde dieser Prozess lediglich als langlebiger Offset wahrgenommen.
- Unterschiedliche Anregungsenergien zeigten bei TA-Messungen von NDCA eine nahezu identische Moleküldynamik mit ca. 200 ps, während für isoliertes NDCA ein starker Abfall der Lebensdauer mit zunehmender Schwingungsenergie beobachtet wurde. In der Gasphase wird somit von einer Deaktivierung über eine Energiebarriere ausgegangen, während in Lösung eine zu schnelle Abkühlung durch Schwingungsrelaxation diesen Prozess verhindert.
- Bei NTCDA konnten in den TA-Messungen nach Anregung des S1-Zustands eine Relaxation in die Triplett-Umgebung innerhalb von wenigen Pikosekunden beobachtet werden, was im Einklang mit der sehr schnellen Deaktivierung in der Gasphase betrachtet werden kann.
Eine ausführliche Vergleichsstudie von isolierten Molekülen mit computergestützten
Rechnungen und Simulationen wurde für die Moleküle NDCA und Me-NI durchgeführt. Dabei wurde explizit auf den Einfluss von Spin-Bahn-Kopplungen und konischen Durchschneidungen eingegangen, welche zu konkurrierenden Deaktivierungsprozessen des S1-Zustands führen können.
- Durch Simulationen der Surface-Hopping-Dynamik wurde deutlich, dass bei NDCA und Me-NI im ersten angeregten Zustand eine konische Durchschneidung (CI) zwischen dem S1- und S0-Zustand erreicht werden kann.
- Während die Dynamik von NDCA bei höherer Schwingungsanregung stark durch die CI dominiert wird, spielt die direkte Relaxation in den elektronischen Grundzustand bei Me-NI offenbar keine Rolle.
- In Abwesenheit der CI zeigen NDCA und Me-NI in einer mit Spin-Bahn-Kopplung erweiterten Simulation der Populationsdynamik einen signifikanten Populationstransfer in die Triplett-Umgebung (T1-T4). Eine innere Umwandlung in den Grundzustand konnte jedoch nur bei Erreichen der CI beobachtet werden.
Eine weitere Verbesserung der ps-Experimente kann durch Aufbau eines Photoelektronen-Spektrometers erreicht werden, da durch diese Technik eine präzisere Aussage darüber getroffen werden kann, aus welchem elektronischen Zustand die Moleküle ionisiert wurden. Eine Unterscheidung von ISC- und IC-Prozessen könnte somit gewährleistet werden.
Die vorliegende Dissertation untersucht fünf unterschiedliche Moleküle hinsichtlich ihrer Geometrien im Grund- und angeregten Zustand sowie deren Dynamik
nach elektronischer Anregung. Der Fokus liegt dabei unter anderem auf Pi-konjugierten Systemen, die über eine zusätzliche aliphatische Einheit verbrückt (Paracyclophan-
Derivate) oder erweitert (Pyracen) sind. Die Paracyclophan-Derivate sind ein ideales Modellsystem um Einsicht in Pi-Pi-Wechselwirkungen zu erlangen. Ein
weiterer Schwerpunkt dieser Arbeit beschreibt die Dynamik des resonanzstabilisierten 2-Methylallyl-Radikals. Die Forschung an solchen kleinen Kohlenwasserstoff-Radikalen ist wichtig, da auf deren Grundlage Modelle entwickelt werden können, die zum Beispiel helfen, den Verbrennungsprozess aufzuklären. Aufgrund ihrer Instabilität sind solche kleinen Kohlenwasserstoff-Radikale nicht einfach zu handhaben und das spektroskopische Vermessen stellt immer eine Herausforderung dar.
Ein System zur Aufnahme pikosekunden-zeitaufgelöster transienter Spektren wurde zu Beginn dieser Arbeit aufgebaut und charakterisiert. Zu diesem Zweck wurden Messungen von beta-Carotin durchgeführt und die Ergebnisse der Experimente mit den in der Literatur vorhandenen verglichen. Außerdem wurde der stark fluoreszierende Laserfarbstoff Rhodamin 6G vermessen, um abschätzen zu können, inwieweit Banden spontaner und stimulierter Emission Einfluss auf die transienten Absorptionsspektren besitzen. Es folgte die spektroskopische Untersuchung zweier Serien gemischtvalenter Verbindungen. Eine Serie besaß eine D-pi-A-, bzw. D-A-, die andere eine D-pi-D-, bzw. D-A-D-Grundstruktur. D und A stehen dabei für ein Elektronendonor-, bzw. Elektronenakzeptorsystem. Die Art der pi-Brücken und der Elektronendonoren wurde dabei variiert und die Verbindungen in verschieden polaren Lösungsmitteln vermessen. Im Mittelpunkt der Untersuchung beider Serien stand dabei die Geschwindigkeit des Elektronenrücktransfers nach einer durch einen Anrege-Puls induzierten Ladungstrennung in verschieden polaren Lösungsmitteln. Diese wurde zum einen beeinflusst durch die Art der pi-Brücke, zum anderen durch die unterschiedlichen Redoxpotentiale der Donorsubstituenten sowie durch das verwendete Lösungsmittel. Der Elektronenrücktransfer erfolgte bei allen der untersuchten Verbindungen und in jedem Lösungsmittel in der Marcus-invertierten Region. Die Transferrate war jedoch in polaren Lösungsmitteln deutlich größer als in apolaren. Außerdem wurden die Resonanz-Raman-Spektren einer der gemischtvalenten Verbindung aufgenommen, um mit dem Ladungstransfer einhergehende Molekülschwingungen identifizieren zu können. Eine Vorhersage der experimentellen ermittelten Elektronentransferraten nach den Methoden von Fermi und Jortner stieß an ihre Grenzen. Es bleibt zu klären, ob dies an einer ungenauen Beschreibung des Elektronentransfers durch die Formeln oder an einer noch zu ungenauen Bestimmung der in die Gleichungen eingehenden, auf unterschiedliche Methoden ermittelten Molekülparameter zurückzuführen ist. In einem weiteren Teil der Arbeit wurden zwei Vertreter der Medikamentenklasse der Fluorochinolone untersucht. Die Experimente mit Ciprofloxacin ergaben unerwartete Ergebnisse, die auf eine photochemische Reaktion schließen lassen, die in der Literatur weder vorgeschlagen noch veröffentlicht wurde. Die Untersuchung von Sparfloxacin ergab keine Ergebnisse, da die erhaltenen transienten Spektren keine Banden aufwiesen.
Polarisations-sensitive Resonanz-CARS- und Resonanz-Raman-Spektroskopie an metallfreien Porphyrinen
(2006)
Es werden in dieser Arbeit Raman-spektroskopische Untersuchungen an metallfreien Porphyrinen in verdünnter Lösung vorgestellt. Dabei werden Laseranregungswellenlängen eingesetzt, die mit elektronischen Resonanzen der Porphyrine zusammenfallen. Die Ausnutzung von Resonanz-Effekten hat zum einen den Vorteil, dass gewisse Raman-Banden, je nach der Symmetrie der zugrunde liegenden Molekülschwingung, eine deutliche Intensitätsverstärkung erfahren können, was den Nachweis auch geringer Probenkonzentrationen ermöglicht. Zum anderen sind anhand der Banden-Parameter Rückschlüsse auf die exakte Molekülsymmetrie möglich. Im Vergleich zu Metalloporphyrinen sind für metallfreie Porphyrine bisher nur wenige Daten aus resonanten Raman-Spektren bekannt. Ein Grund hierfür ist, dass letztere ein höheres Maß an Fluoreszenz zeigen, die die Raman-Signale überlagert. Während bei Laseranregungen im Bereich hochenergetischer elektronischer Absorptionen der Porphyrine (B-Banden-Region) die klassische spontane Raman-Spektroskopie noch angewendet werden kann, ist dies im Bereich niederenergetischer Absorptionen (Q-Banden-Region) meist nicht mehr möglich. Um auch Anregungen in der Q-Banden-Region zu verwirklichen, wird daher in dieser Arbeit von der kohärenten anti-Stokesschen Raman-Streuung (coherent anti-Stokes Raman scattering, CARS) Gebrauch gemacht. Die CARS-Spektroskopie ermöglicht es, das Fluoreszenzproblem zu umgehen, und bietet zudem noch weitere Vorteile, z. B. bezüglich der Unterscheidbarkeit spektral benachbarter Banden sowie bezüglich der Bestimmung symmetrierelevanter Parameter. Raman-Banden-Parameter aus Q-Banden-CARS-Spektren konnten hier für vier metallfreie Porphyrine, die sich im Substitutionsmuster an den beta-Kohlenstoffatomen des Tetrapyrrol-Makrozyklus unterscheiden, erhalten werden. Die CARS-Parameter, in Kombination mit Parametern aus spontanen B-Banden-Raman-Spektren sowie mit quantenchemisch berechneten Schwingungsvektoren, ließen den Schluss zu, dass Symmetrieunterschiede zwischen den Makrozyklen dieser Moleküle zwar gering, aber durchaus feststellbar sind. Desweiteren konnten durch die niederenergetische Anregung für die metallfreien Porphyrine spezifische Resonanzeffekte nachgewiesen werden, die z. T. von den für Metalloporphyrine bekannten Mustern abweichen.
As organic semiconductors gain more importance for application, research into their properties has become necessary. This work investigated the exciton and charge transport properties of organic semiconducting crystals. Based on a hopping approach, protocols have been developed for the calculation of Charge mobilities and singlet exciton diffusion coefficients. The protocols do not require any input from experimental data except for the x-ray crystal structure, since all needed quantities can be taken from high-level quantum chemical calculations. Hence, they allow to predict the transport properties of yet unknown compounds for given packings, which is important for a rational design of new materials. Different thermally activated hopping models based on time-dependent perturbation theory were studied for the charge and exciton transport; i. e. the spectral overlap approach, the Marcus theory, and the Levich-Jortner theory. Their derivations were presented coherently in order to emphasize the different levels of approximations and their respective prerequisites. A short reference was made to the empirical Miller-Abrahams hopping rate. Rate equation approaches to calculate the stationary charge carrier mobilities and exciton diffusion coefficients have been developed, which are based on the master equation. The rate equation approach is faster and more efficient than the frequently used Monte Carlo method and, therefore, provides the possibility to study the anisotropy of the transport parameters and their three-dimensional representation in the crystal. The Marcus theory, originally derived for outer sphere electron transfer in solvents, had already been well established for charge transport in organic solids. It was shown that this theory fits even better for excitons than for charges compared with the experiment. The Levich-Jortner theory strongly overestimates the charge carrier mobilities and the results deviate even stronger from the experiment than those obtained with the Marcus theory. The latter contains larger approximations by treating all vibrational modes classically. The spectral overlap approach in combination with the developed rate equations leads to even quantitatively very good results for exciton diffusion lengths compared to experiment. This approach and the appendant rate equations have also been adapted to charge transport. The Einstein relation, which relates the diffusion coefficient with the mobility, is important for the rate equations, which have been developed here for transport in organic crystals. It has been argued that this relation does not hold in disordered organic materials. This was analyzed within the Framework of the Gaussian disorder model and the Miller-Abrahams hopping rate.
Im Fokus dieser Arbeit standen (6,5)-SWNT-PFO-BPy-Komplexe als Vertreter für polyfluorenstabilisierte, einwandige Kohlenstoffnanoröhren. In einem ersten Projekt wurden präparative Verfahren zur Dispergierung und Abscheidung dieser Proben weiterentwickelt. Es ist gelungen, die Ansatzgröße von 15 mL auf 200 mL hochzuskalieren sowie dünne SWNT-Filme über Rotationsbeschichtung herzustellen.
Des Weiteren wurde die lichtinduzierte Dynamik in halbleitenden SWNTs von der ps- bis zur µs-Zeitskala untersucht. Hier wurde ein umfassendes Bild zur Singulett- und Triplett-Exzitonendynamik in halbleitenden Kohlenstoffnanoröhren gezeichnet, welches maßgeblich durch diffusionslimitierte Prozesse geprägt ist.
Abschließend wurde eine Methode vorgestellt, mit der sich Informationen zur Struktur von SWNT-Polymer-Komplexen und anderen supramolekularen Systemen gewinnen lassen. Diese basiert auf der Kombination von polarisationswinkelaufgelöster Absorptionsspektroskopie an anisotropen Proben und globaler Datenanalyse.
Pulse-Sequence Approaches for Multidimensional Electronic Spectroscopy of Ultrafast Photochemistry
(2014)
Observing chemical reactions in real time with femtosecond laser pulses has evolved into a very popular field of research since it provides fascinating insights into the nature of photochemical transformations. Nevertheless, many photochemical reactions are still too complex for which reason the underlying mechanisms and all engaged species cannot be identified thoroughly. In these cases, conventional time-resolved spectroscopy techniques reach their technical limits and advanced approaches are required to follow the conversion of reactants to their products including all reaction intermediates.
The aim of this work was therefore the development of novel methods for ultrafast spectroscopy of photoreactive systems. Though the concept of coherent multidimensional spectroscopy has so far exclusively been used to explore photophysical phenomena, it also offers great potential for the study of photochemical processes due to its capability of extracting spectroscopic information along several frequency dimensions. This allows resolving the photochemical connectivity between various interconvertible molecular species with ultrafast temporal resolution on the basis of their absorption and emission properties as the spectral correlations are explicitly visualized in the detected spectra.
The ring-open merocyanine form of the photochromic compound 6-nitro BIPS was studied in Chap. 4 of this work. Merocyanines and their associated ring-closed spiropyrans are promising candidates for future applications as, for instance, molecular electronics or optical data storage due to their unique property of being switchable between two stable congurations via light illumination. Transient absorption with sub-50 fs temporal resolution and broadband probing was employed to characterize the photodynamics of this system with variable excitation wavelengths. Using global data analysis, it could be inferred that two different merocyanine isomers with differing excited-state lifetimes exist in solution. These isomers differ in the cis/trans conguration in the last bond of the methine bridge. The minority of isomers exist in the all-trans conguration (TTT) while the isomer with a cis conguration of the third dihedral angle (TTC) is dominant. A characteristic band, detected after long pump-probe delays, was attributed to the unidirectional cis->trans photoisomerization reaction of the TTC to the TTT form. The quantum yield of the reaction was estimated to be (18+-4) %. In addition, pronounced coherent vibrational wave-packet oscillations were observed and it was concluded that these signatures are related to the product formation.
Coherent two-dimensional electronic spectroscopy was successfully implemented using a partially collinear pump-probe beam geometry in combination with a femtosecond pulse shaper. The use of a whitelight probe continuum enabled us to probe contributions far-off the diagonal over the complete visible range. By properly adjusting the relative phase between the first two laser pulses with the pulse shaper, the principle of phase-cycling was explained and it was demonstrated that the measurement can be carried out in the so-called "rotating frame" in which the observed frequencies detected during the coherence time are shifted to lower values. It was shown that these concepts allow the extraction of the desired background-free photon echo while the amount of necessary data points is highly reduced.
In order to put our proposal of multidimensional spectroscopy of photoreactive systems into practice, third-order two- and three-dimensional spectroscopy was then employed for an in-depth analysis of a photoreactive process, in which the photoisomerization of 6-nitro BIPS served as a model system. The measured two-dimensional spectra revealed the cis->trans photoisomerization after long population times. By collecting a large data set of two-dimensional spectra for short population times and by applying a Fourier transform along the population time axis, the third-order three-dimensional spectrum was obtained. The novelty of this approach compared to coherent two-dimensional spectroscopy is the introduction of a third axis associated with the vibrational frequencies of the molecular system. In this way, the formation of the reaction product was evidenced and it was shown that the product is formed in its first excited singlet state within 200 fs after excitation. This method hence visualizes the photochemical connections between different reactive molecular species in an intuitive manner and further exposes the normal modes connecting reactant and product. Such conclusions cannot be drawn with conventional third-order techniques such as transient absorption since they are
not capable of capturing the full third-order response, but only a subset of it. The reaction mechanism and the role of the observed vibrational modes were uncovered by comparing the experimental data with the results of high-level quantum-chemical calculations performed by our collaborators in the group of Prof. B. Engels from the
theoretical chemistry department at the University of Würzburg. Specific calculated molecular normal modes could be assigned to the experimentally observed vibrational frequencies and potential energy surfaces of the electronic ground state and of the first excited state were computed. The technique implemented in this chapter is general and is applicable for the time-resolved analysis of a wide range of chemical reaction networks.
In the first part of Chap. 5, coherent two-dimensional spectroscopy was employed to track the reaction paths of the related 6,8-dinitro BIPS after S1 excitation. Several differences to the photochemical properties of 6-nitro BIPS were found. From the 2D spectra, the cis-trans isomerization between the two merocyanine isomers could be excluded as a major reaction path for this compound. To explore the dynamics after reexcitation to higher-lying electronic states, pump-repump-probe spectroscopy was implemented and the formation of a new species, a radical cation, was observed. To identify the precursor isomer, triggered-exchange two-dimensional spectroscopy, a fifth-order technique previously only available in the infrared regime for vibrational transitions, was implemented for the first time for electronic excitations in the visible. This approach combines the properties of the pump-repump-probe technique with the potential of coherent two-dimensional spectroscopy. It correlates the absorption frequency of a reactive molecular species with the emission signatures of the product formed from this species after an additional absorption of a photon. Using this method, it was unambiguously proven that only the TTC isomer reacts to the radical cation thus forming the precursor species of the reaction. Electronic triggered-exchange two-dimensional spectroscopy is hence another improved technology for time-resolved spectroscopy with applications in the study of multistep photoreactions and higher-lying electronic states. While in the two preceding chapters third- and fifth-order experiments were discussed that neglect the vectorial character of light-matter interactions, Chap. 6 focused on a novel theoretical formalism enabling the description of light fields optimized for polarization-sensitive higher-order nonlinearities. This formalism is based on the von Neumann time-frequency representation of shaped femtosecond laser pulses which permits the definition of multipulse sequences on a discrete time-frequency lattice. Hence, not only the temporal spacing between subpulses is adjustable, but also the center frequencies may be adapted such that they fit the experimental requirements. This method was generalized to the description of pulse sequences with time-varying polarization states. It was shown that by using this description, the polarization ellipticity, orientation angle, relative phase and intensity, and the time-frequency location of each subpulse is explicitly controllable. The accuracy of the transformations from Fourier space to von Neumann domain and vice versa was demonstrated. Moreover, a strict accordance between the von Neumann polarization parameters with the conventional parameters in time domain was found for well separated subpulses. A potential future application of this approach is polarization-sensitive multidimensional spectroscopy in which hidden cross peaks may be isolated by defining the pulses in the von Neumann picture with suitable polarization sequences. This method could also be used in quantum control experiments in which the polarization of the light field is used as a major control knob.
This thesis summarizes our efforts to open the field of femtochemistry to the concept of coherent multidimensional electronic spectroscopy. Making use of femtosecond pulse shaping, sub-50 fs temporal resolution, broadband spectral probing, higher-order nonlinearities, and new types of laser pulse descriptions, the presented methods might stimulate further future advancements in this research area.
Quantenchemische Untersuchungen von Umgebungseinflüssen bei offen- und geschlossenschaligen Systemen
(2022)
In dieser Dissertation werden die Umgebungseinflüsse auf die strukturellen und elektronischen Eigenschaften von verschiedenen offen- und geschlossenschaligen Systemen mittels quantenchemischer Methoden berechnet.
Ein Kernpunkt umfasst die Untersuchung von verdreht angeordneten, biradikalischen Diborylalkenen, welche eine ungesättigte C2R2-Brücke (R = Et, Me) besitzen und durch cyclische (Alkyl)(amino)carbene (CAACs) stabilisiert werden. Quantenchemische Berechnungen zeigen, dass hauptsächlich sterische Effekte für die Ausbildung einer verdrehten Molekülanordnung verantwortlich sind, während bei geringen sterischen Wechselwirkungen (R = H) die Delokalisationseffekte überwiegen, wodurch eine planare Struktur begünstigt wird. Die Bevorzugung einer offenschaligen Singulettkonfiguration anstelle eines Tripletts ist auf den großen Energieunterschied der beiden einfach besetzten Molekülorbitale zurückzuführen. Durch die Berechnung der Lösungsmitteleffekte mithilfe von polarisierbaren Kontinuumsmodellen kann gefolgert werden, dass mit zunehmender statischer Dielektrizitätskonstante eine planare und geschlossenschalige Struktur stärker stabilisiert wird als eine verdrehte Anordnung.
Ein weiteres Thema dieser Dissertation befasst sich mit der quantenchemischen Analyse eines makrozyklischen Perylenbisimid-Trimersystems, welches eingebettet in einer Polymethylmethacrylat-Matrix bei Temperaturen nahe dem absoluten Nullpunkt eine Lokalisierung der ersten drei angeregten Zustände zeigt. Quantenchemische Vakuumberechnungen ergeben, dass unabhängig von der gegenseitigen geometrischen Orientierung der drei Perylenbisimid-Chromophore der Übergang vom Grundzustand in den S1-Zustand verboten ist und dass die ersten drei angeregten Zustände delokalisiert vorliegen. Mithilfe von expliziten Lösungsmittelmodellen kann jedoch gezeigt werden, dass das Auftreten dieser Lokalisierungen auf eine inhomogene Polymethylmethacrylat-Umgebung zurückzuführen ist, die zu einem Symmetriebruch und somit zu einer Zunahme der Oszillatorstärke für S1 und der Lokalisierungsgrade für S1, S2 und S3 führt.
Darüber hinaus wird der Lösungsmitteleinfluss auf die angeregten Zustände des Azulens mittels impliziter und expliziter Lösungsmittelmodelle berechnet. Bei einer Erhöhung der dynamischen Dielektrizitätskonstante im impliziten Modell nehmen die Anregungsenergien der vertikalen Singulettzustände ab, wobei der Effekt mit steigender Oszillatorstärke zunimmt. Die Auswirkung der statischen Dielektrizitätskonstante auf die Anregungsenergien ist dagegen deutlich schwächer ausgeprägt. Im expliziten Modell bewirkt das Lösungsmittel ebenfalls eine Abnahme der Anregungsenergie des hellen Singulettzustands, wenn auch in geringerem Umfang als im impliziten Modell.
Als letztes Thema wird der Inhibitionsmechanismus der Cysteinprotease Rhodesain durch zwei modifizierte 1,4-Naphthoquinone untersucht. Während beide Naphthoquinone an der 2-Position eine Dipeptideinheit aufweisen, besitzen sie an der 3-Position entweder einen Nitril- oder Chloridsubstituenten. Zwar erfolgt bei beiden Derivaten die Inhibition über einen kovalent-reversiblen Mechanismus, jedoch verläuft die Hemmung im Falle des Nitrilderivats erheblich effektiver. Die quantenchemischen Berechnungen eines vereinfachten Modells zeigen, dass die Cysteineinheit (HS-R) bevorzugt in einer exothermen und reversiblen Additionsreaktion an die elektronenarme C-C-Doppelbindung der Naphthoquinone anlagert. Dabei werden kleinere Reaktionsenergien für die Reaktion des Chlorderivats als für die Reaktion des Nitrilderivats erhalten. Durch die Berücksichtigung von Wasser in einem impliziten Lösungsmittelmodell kommt es bei fast allen Reaktionsprodukten zu einer Energiezunahme, die bei der Reaktion des Nitrilderivats stärker ausfällt als bei der Reaktion des Chlorderivats.
Im Rahmen dieser Arbeit werden unterschiedliche Aspekte der korrelierten Elektronen-Kerndynamik, anhand verschiedener Modellsysteme untersucht. Dabei wird vor allem auf den Vergleich numerisch exakter und approximativer Methoden zur Beschreibung der Wellenpaketdynamik eingegangen, wobei bei letzterem das Augenmerk auf der Born-Oppenheimer (BO) Näherung liegt. Die verwendeten Modellsysteme erlauben es, die gekoppelte Elektronen-Kern-Dynamik exakt zu beschreiben. Die daraus gewonnenen Ergebnisse dienen als Referenz für den Vergleich mit den Näherungsmethoden.
Im ersten Teil der Arbeit wird die Dynamik eines Wellenpakets in der Umgebung einer Konischen-Durchschneidung (CI) untersucht, wobei die Beschreibung des Wellenpakets quantenmechanisch und durch die klassische Mechanik im Phasenraum erfolgt.
Im zweiten Teil wird die Wahrscheinlichkeitsflussdichte untersucht. Zuerst wird ein Fall konstruiert, in welchem die Bewegung im elektronischen Grundzustand stattfindet, sodass die Bedingungen der BO Näherung erfüllt sind. Dabei wird vor allem auf das Verschwinden der elektronischen Wahrscheinlichkeitsflussdichte innerhalb der BO Näherung eingegangen. Im weiteren Verlauf werden die Flussdichten in der Umgebung einer CI untersucht, wobei unterschiedliche Situationen modelliert werden.
Im dritten Teil wird die Berechnung des elektronischen Impulserwartungswerts innerhalb der BO Näherung untersucht. Dieser verschwindet innerhalb der BO Näherung, wenn man diesen direkt berechnet (Geschwindigkeitsform), während man über das Ehrenfest Theorem (Längenform) sehr gute Werte erhält.
Im vierten Teil wird eine neue Flussdichte, die Translationsflussdichte, vorgestellt. Diese ergibt sich aus der Überlegung, dass die Geschwindigkeitsform des Impulserwartungswerts durch die Wahrscheinlichkeitsflussdichte ausgedrückt werden kann. Demnach muss auch die Längenform einer Flussdichte entsprechen und man erhält die Translationsflussdichte.
Diese Arbeit befasst sich mit den spektralen Signaturen molekularer Aggregate sowie mit ihrer Wellenpakets- und Populationsdynamik in angeregten Zuständen unter dem Einfluss externer Störungen und photoinduzierter Asymmetrie.
Hierzu werden quantendynamische numerische Berechnungen mit der Multi-Configuration Time-Dependent Hartree-Methode
durchgeführt, um die angesprochenen Prozesse zu charakterisieren.
Durch die Konzentration auf Modellrechnungen sind die qualitativen Ergebnisse dieser Arbeit auf viele Systeme übertragbar.
Zunächst widmet sich die Arbeit den linearen UV/Vis-Absorptions- und Emissionsspektren von Aggregaten.
Hier zeigt sich, dass die Anzahl der Größen, die ein Absorptionsspektrum bestimmen -- etwa die Anzahl der Chromophore, ihre geometrischen Anordnung und die elektronische Kopplung zwischen ihnen -- zu groß ist, um ihre numerischen Werte eindeutig aus den Spektren bestimmen zu können.
Insbesondere können sich die Auswirkungen der Aggregatgröße und der Kopplungsstärke gegenseitig so beeinflussen, dass die Form der Absorptionsbande bei sehr unterschiedlichen Systemen nahezu identisch ist. Daraus ergeben sich Schwierigkeiten bei der Interpretation experimenteller Spektren, insbesondere von selbst-aggregierten Oligomeren, deren Größe unbekannt ist.
Es ist daher notwendig, entweder die elektronische Kopplung oder die Anzahl der Monomere in einem Aggregat
durch andere experimentelle Methoden unabhängig zu bestimmen. Ist die Aggregatgröße jedoch bekannt,
können die Absorptionsspektren sehr wohl zur Bestimmung anderer Eigenschaften des Systems herangezogen werden.
Dies wird durch die Untersuchung der Spektren kovalent gebundener zyklischer Aggregate aus drei und vier cis-Indolenin-Squarain-Molekülen als Beispiel für Systeme mit bekannter Größe dargestellt.
Das zweite Hauptthema der Arbeit ist die Populationsdynamik in angeregten Zuständen molekularer Aggregate.
Dazu werden numerische Rechnungen an Dimeren, Pentameren und Nonameren durchgeführt. Eine Asymmetrie, sei es im System selbst oder am Wellenpaket, das durch die Anregung entsteht, kann dazu führen, dass ein einzelnes Monomer dauerhaft bevorzugt populiert ist. Wenn durch eine externe Störung die Energie des angeregten Zustands bestimmter Monomere für eine gewisse Zeit erhöht ist,
kommt es zu einer Lokalisation der Population in diesem energetisch höheren Zustand.
In einem System mit weiteren internen Freiheitsgraden wird die Population auf benachbarte Monomere übertragen,
wenn der Betrag der Energieverschiebung des gestörten Zustands mit dem Abstand der Schwingungsniveaus zusammenfällt.
Der anfängliche Lokalisierungseffekt ist darüber hinaus zustandsspezifisch:
Er wird durch die Überlappintegrale der Schwingungskomponenten der Wellenfunktion in den diabatischen angeregten elektronischen Zuständen bestimmt.
Durch die Kombination von zwei Laserpulsen kann auch ein Wellenpaket in den angeregten Zuständen erzeugt werden,
dessen Symmetrieachsen nicht mit denen der Potentialflächen des Systems zusammenfallen.
Dadurch, dass hier die Asymmetrie schon im Wellenpaket vorliegt, kann es auch ohne äußere Störung zu einer Lokalisation der Population auf einem Monomer kommen.
In the context of this dissertation very long ranged exciton diffusion lengths (LD) were simulated for perylene-based materials under ideal conditions. This leads to the conclusion that the short LD values in existing materials result from an extrinsic and intrinsic immobilization. The latter, which is a specific material property, is based on a relaxation of the exciton into self-trapping states. An in-depth understanding of the atomistic processes defining self-trapping is essential to developing materials with long LD in the future, in which intrinsic immobilization is prevented. For the development of such a mechanistic understanding it is crucial that a clear relationship between molecular structure and LD is available. This is given by single crystals of diindeno perylene (DIP) and α-perylene tetracarboxylic anhydride (α-PTCDA). An extraordinary large LD of 90 nm was measured for the first one, while the latter possesses only 22 nm. Part of this thesis was to deliver reasons for this discrepancy. Only self-trapping comes into question to explain the different LD values. One reason for the different self-trapping in DIP and α-PTCDA could lie in the electronic structure. However, it was possible to demonstrate that a wide range of perylene-based materials possess no significant differences in their electronic structures. Consequently, such differences can be neglected for the explanation of immobilization mechanisms for the exciton. A further possible explanation could be polarization effects in the crystal, which influences the electronic structure of perylene based materials differently. Especially their influence on charge transfer (CT) states, which are located above the optically bright Frenkel state, was in question because such states could be stabilized by a polarizable surrounding. A significant influence of polarization effects on all considered states were excluded by using a polarizable continuum model. Hence, the small LD values in α-PTCDA are an evidence for self-trapping, which produces a crystal structure built up by π-stacks, while the one of DIP is of herringbone type. Since polarization effects can be neglected, is the dimer only via steric restrictions influenced by the crystal. Hence, a method describing self-trapping has to consider such effects, so that a mechanical embedding QM/MM approach is sufficient. Now, potential energy surfaces were calculated, on which wave packet dynamics were subsequently performed. In this way, atomistic mechanisms for the immobilization of excitons were described for the first time in organic materials. Self-trapping was studied in crystals of α-PTCDA by potential energy surfaces, which map an intermolecular shift motion of the dimer in the crystal. An immobilization of excitons occurs within 500 fs, which results from an irreversible energy loss together with a local deformation of the crystal lattice. This prevents a further transport of the exciton. In the case of DIP, this immobilization does not proceed due to high barriers. These barriers result from the herringbone type packing motif in the DIP crystal. This discrepancy in the dynamics explains the different LD values in DIP and α-PTCDA. In a further example, an exciton immobilization was found in helical π-aggregates of perylene tetracarboxylic bisimide (PBI) molecules. Self-trapping is caused by a relaxation mechanism, in which the exciton is transferred by asymmetric vibrations of the aggregate from the bright to a dark Frenkel state within 200 fs, whereby the transition is mediated by a CT state. However, the CT state is almost non-populated during the whole mechanism so that its participation could not yet be proven experimentally. This entire procedure is solely possible in helical aggregates, because only for such structures is there a CT state located next to the bright Frenkel state. At the final Frenkel state a torsional motion around the π-stacking axis is possible so that the loss in energy and the local rearrangement of the aggregate structure occurs, which means a self-trapping of the exciton. This mechanism is in perfect agreement with all available experimental data. These insights allow the conclusion that in future materials for organic solar cells an irreversible and ultrafast deformation of aggregates after photo-absorption must be avoided. Only in this way long LD values can be achieved and exciton self-trapping can be prevented. However, small LD values are always predicted in helical aggregates of perylene-based materials, because exciton immobilization occurs already due to small molecular motions. For this reason such aggregates are inappropriate for the use in organic solar cells. Long LD values are expected for aggregate structures with long intermolecular shifts or molecules with bulky substituents.
This work aims at elucidating chemical processes involving homogeneous catalysis and photo–physical relaxation of excited molecules in the solid state. Furthermore, compounds with supposedly small singlet–triplet gaps and therefore biradicaloid character are investigated with respect to their electro–chemical behavior. The work on hydroboration catalysis via a reduced 9,10–diboraanthracene (DBA) was preformed in collaboration with the Wagner group in Frankfurt, more specifically Dr. Sven Prey, who performed all laboratory experiments. The investigation of delayed luminescence properties in arylboronic esters in their solid state was conducted in collaboration with the Marder group in Würzburg. The author of this work took part in the synthesis of the investigated compounds while being supervised by Dr. Zhu Wu. The final project was a collaboration with the group of Anukul Jana from Hyderabad, India who provided the experimental data.
In this thesis, the influence of an environment on molecules and, in particular, on the quantum control of such systems is investigated. Different approaches to describe system-bath dynamics are implemented and applied. The inclusion of a dissipation term in the system Hamiltonian leads to energy loss and relaxation to the ground state. As a first application, the isomerisation reaction in an aromatic complex is treated. It is shown that this simple model is able to reproduce results of time-resolved spectroscopic measurements. Next, the influence of noise is investigated. The incorporation of fluctuations reveals that energy is not conserved and coherences are destroyed. As an example, the quantum control of a population transfer in Na2 is examined. The efficiency of control processes is studied in dependence on the strength of the noise and different system-bath couplings. Starting with the unperturbed system, Local Control Theory is applied to construct a field which selectively transfers population into a single excited electronic state. The coupling to the bath is then switched on to monitor the dependence of the coupling strength on the transfer efficiency. The perturbation of the bath effects the Na2 molecule in such a way that potential energy curves and transition dipole moments are distorted. An important result is that already elastic collisions lead to a substantial loss of control efficiency. The most promising approach used in this thesis is the stochastic Schrödinger equation. It is equivalent to the commonly employed descriptions of system-bath dynamics within the reduced density matrix formalism. It includes decoherences and dissipation caused by elastic and inelastic collisions. Our contribution is the incorporation of laser excitation into the kinetic Monte-Carlo scheme. Thus we are able to apply this stochastic approach to the quantum control of population transfer in the sodium dimer. Because within our description it is possible to separate pure dephasing, inelastic transitions, and coherent time-evolution, we can identify the relative influence of these processes on the control efficiency. This leads to a far more physical picture of the basic processes underlying the perturbations of an environment then what a reduced density matrix description can provide. In utilising the stochastic wave function approach instead of the density matrix formalism, the computations are quite efficient. The stochastic Schrödinger equation is realised by N independent runs, where, in our case, an ensemble size of N = 1000 gives converged results. The efficiency of the laser control process is studied as a function of temperature and collision rates. A rise in temperature (or collision rate) reeffects a stronger fluctuation and thus results in a less efficient transfer by the control field. Though the Gaussian fluctuations used here do not strictly represent 'white'- noise, since a deterministic machine is not able to produce uncorrelated random numbers, an acceptable distribution is achieved by simple procedures. An improvement of the here applied algorithms would, for instance, include a more sophisticated sampling of the dephasing rates. Only one example of a control process is studied here and an application of the developed approach to other problems of quantum control is to be performed. This thesis established a systematic approach to understand quantum control in the presence of an environment.
In the context of quantum mechanical calculations, the properties of non-adiabatic coupling in a small system, the Shin-Metiu model, is investigated.
The transition from adiabatic to non-adiabatic dynamics is elucidated in modifying the electron-nuclear interaction. This allows the comparison of weakly correlated electron-nuclear motion with the case where the strong correlations determine the dynamics.
The studies of the model are extended to include spectroscopical transitions being present in two-dimensional and degenerate four-wave mixing spectroscopy.
Furthermore, the quantum and classical time-evolution of the coupled motion in the complete electron-nuclear phase space is compared for the two coupling cases.
Additionally, the numerically exact electron flux within the weak coupling case is compared to the Born-Oppenheimer treatment.
In the last part of the thesis, the model is extended to two dimensions.
The system then possesses potential energy surfaces which exhibit a typical 'Mexican hat'-like structure and a conical intersection in the adiabatic representation.
Thus, it is possible to map properties of the system onto a vibronic coupling (Jahn-Teller) hamiltonian. Exact wave-packet propagations as well as nuclear wave-packet dynamics in the adiabatic and diabatic representation are performed.
In dieser Arbeit werden Pflanzen, Pflanzengewebe, Pflanzenzellen und Mikro-organismen spektroskopisch untersucht und ihre Inhaltsstoffe unter minimaler Probenpräparation im biologischen Gewebe direkt lokalisiert und identifiziert. Unter den verfügbaren Schwingungs-spektroskopischen Methoden ist die Mikro-Raman-Spektroskopie für diese Fragestellungen besonders gut geeignet, da Wasser Raman-Spektren nur wenig beeinflusst. Daher kann mit Raman-spektroskopischen Methoden auch in stark wasserhaltigem Gewebe gemessen werden. Weiterhin erhält man mit der Mikro-Raman-Spektroskopie eine gute räumliche Auflösung im sub-µm-Bereich, wodurch es möglich ist, heterogene Proben zu untersuchen. Darüber hinaus kann die Mikro-Raman-Spektroskopie mit anderen Methoden, wie z. B. der oberflächenverstärkten Raman-Spektroskopie (SERS), kombiniert werden. In pflanzlichen Zellen liegt eine Vielzahl von Substanzen in geringen Konzentrationen vor. Aufgrund der niedrigen Quantenausbeute des Raman-Effekts treten vor allem Substanzen, die eine Resonanz-Verstärkung erfahren, in den Spektren hervor. Diese Substanzen, wie z. B. b-Carotin, können deshalb in geringen Konzentrationen detektiert werden. Der Schwerpunkt dieser Arbeit liegt in der Untersuchung von Sekundär-Metaboliten wie Alkaloiden, Lipiden oder Terpenen, die in der Pflanze agglomerieren. Neben der Identifikation von Inhaltsstoffen, können die Raman-Spektren von Pflanzen für die chemotaxonomische Klassifizierung mit Hilfe der hierarchischen Clusteranalyse verwendet werden. Die Identifizierung von Mikroorganismen auch in sehr geringen Mengen (Monolage, einzelne Zellen) ist mit der Mikro-Raman-Spektroskopie nur unter bestimmten Voraussetzungen durchführbar. Für weitergehende Untersuchungen wird hier die SERS-Sonde oder ein TERS-Aufbau verwendet werden.
In the last two decades, coherent multidimensional femtosecond spectroscopy has become a powerful and versatile tool to investigate chemical dynamics of a broad variety of quantum systems. The combination of transient information, equivalent to pumpprobe spectroscopy, with information about coupling between energetic states and the system environment allows an extensive insight into atomic and molecular properties. Many experimental 2D setups employ the coherence-detected approach, where nonlinear system responses are emitted as coherent electric _elds which are detected after spatial separation from the excitation pulses. As an alternative to this experimentally demanding approach, population-based 2D spectroscopy has been established. Here, the coherent information is encoded in the phases of a collinear excitation-pulse train and extracted from incoherent signals like uorescence via phase cycling. In principle, the use of uorescence as observable can boost the sensitivity down to the single-molecule level. The aim of this work was the realization of a pulse-shaper assisted fully collinear uorescence-detected 2D setup and the conducting of proof-of-principle experiments in the liquid phase. This inherently phase-stable and compact setup has been presented in chapter 3, with the utilized pulse shaper granting amplitude and phase modulation on a shot-to-shot basis. Two di_erent types of white-light sources have been applied and evaluated with regard to their respective advantages for 2D uorescence spectroscopy. A variety of artifact sources that can occur with the present setup have been discussed, and correction schemes and instructions for avoiding these artifacts have been provided. In chapter 4, the setup has been demonstrated by employing a four-pulse sequence on cresyl violet in ethanol. A detailed data-acquisition and data-analysis procedure has been presented, where phase cycling is used for extraction of the nonlinear contributions. Depending on the phase-cycling scheme, it is possible to recover all nonlinear contributions in a single measurement. Well-known quantum-beating behavior of cresyl violet during the population time could be reproduced. Due to measuring in a rotating-frame environment and 1 kHz shot-to-shot pulse incrementation, it was possible to obtain a 2D spectrum for one population time in 6 s. Via error evaluation it has been shown that 10_ averaging (1 min) is su_cient to obtain a root-mean-square error of < 0:05 compared to 400_ averaging, proving that the utilized acquisition scheme is well suited. The realization of the _rst experimental uorescence-detected 2Q 2D experiment and the _rst experimental access to the theoretically predicted 1Q-2Q contribution
Schwingungsspektroskopie ist eine vielseitige spektroskopische Methode, mit der Molekülstrukturen und inter-/intramolekulare Wechselwirkungen untersucht werden können. Sie ist deshalb ein hervorragendes Mittel für die Identifikation von Molekülen. Die vorliegende Arbeit umfasst drei Projekte, in denen Schwingungsspektroskopie angewandt wurde, um reaktive Moleküle und ihre Hochtemperatur-Reaktionsprodukte zu untersuchen:
1. Die Aufklärung der Entstehungsmechanismen von polycyclischen aromatischen Kohlenwasserstoffen (PAKs) in Verbrennungsprozessen ist eines der Hauptanliegen der Verbrennungschemie.
In der vorliegenden Arbeit wurde IR/UV-Ion-Dip-Spektroskopie in Verbindung mit DFT-Frequenzrechnungen und FTIR-Messungen angewandt, um Produkte von Radikal-Radikal-Reaktionen in einem Mikroreaktor bei hohen Temperaturen zu identifizieren. Als IR-Laserquelle für die IR/UV-Ion-Dip-Experimente diente der Freie-Elektronen-Laser FELIX (Free-Electron Laser for Infrared eXperiments) in Nijmegen (Niederlande).
In einem Teilprojekt wurde der A 1A´ (S1) <- X 1A´ (S0) Übergang in 1-(Phenylethinyl)naphthalin (1-PEN), einem mutmaßlich verbrennungsrelevanten Molekül, mit [1+1]-REMPI-Spektroskopie untersucht.
2. Die Identifikation von gasförmigen Reaktionsprodukten bei der thermischen Analyse (EGA: Emissionsgasanalyse) kann als komplementäre Methode zur DTA/TG zusätzliche Informationen für die Aufklärung von Reaktionsmechanismen liefern.
Der Aufbau eines elementaren EGA/FTIR-Experiments, basierend auf einer heizbaren IR-Gaszelle, ermöglichte in der vorliegenden Arbeit die Durchführung dynamischer IR-Messungen, mit denen thermische Umsetzungen von Übergangsmetall-Precursorkomplexen zu Koordinationspolymeren untersucht wurden.
3. Die Synthese des ersten bei Raumtemperatur stabilen Diborins, einer Verbindung mit einer Bor-Bor-Dreifachbindung, stellte einen Meilenstein in der elementorganischen Chemie dar. Dies implizierte eine umfassende Untersuchung der Eigenschaften der BB-Bindung und hatte die Synthese einer Reihe ähnlicher Bor-Bor-Mehrfachbindungssysteme mit variierenden Bindungseigenschaften zur Folge.
In der vorliegenden Arbeit wurde Raman-Spektroskopie in Verbindung mit DFT-Frequenzrechnungen angewandt, um für diese Bor-Bor-Systeme die strukturellen/elektronischen Eigenschaften der zentralen CBBC-Einheit zu untersuchen.
Simulationen zur transienten Absorptionsspektroskopie an Energie- und Ladungstransfersystemen
(2022)
Anregungsinduzierte Ladungstransferprozesse gemischtvalenter Verbindungen in einem, bzw. zwei Vibrationsfreiheitsgraden werden mithilfe vibronischer Modellsysteme untersucht. Anhand transienter und linearer Absorptionsspektren werden die berechneten mit experimentell bestimmten Daten verglichen. Eine detailliertere theoretische Analyse erfolgt unter den Gesichtspunkten der Populations- und Wellenpaketdynamik.
Darüber hinaus wird der Prozess der Exziton-Exziton-Annihilierung mithilfe eines elektronischen Modellsystems untersucht. Zu diesem Zweck werden, zusätzlich zu den oben genannten Methoden, spektroskopische Signale unterschiedlicher Emissionsrichtungen zum Vergleich herangezogen.
Nanoelectronics is an essential technology for down-scaling beyond the limit of silicon-based electronics. Single-Wall Carbon Nanotubes (SWNT) are semiconducting components that exhibit a large variety of properties that make them usable for sensing, telecommunication, or computational tasks. Due to their high surface to volume ratio, carbon nanotubes are strongly affected by molecular adsorptions, and almost all properties depend on surface adsorption. SWNT with smaller diameters (0.7-0.9nm) show a stronger sensitivity to surface effects. An optimized synthesis route was developed to produce these nanotubes directly. They were produced with a clean surface, high quality, and large lengths of 2 μ m. The results complement previous studies on larger diameters (0.9-1.4nm). They allow performing statistically significant assumptions for a perfect nanotube, which is selected from a subset of nanotubes with good emission intensity, and high mechanical durability. The adsorption of molecules on the surface of carbon nanotubes influences the motion and binding strength of chargeseparated states in this system. To gain insight into the adsorption processes on the surface with a minimum of concurrent overlapping effects, a microscopic setup, and a measurement technique were developed. The system was estimated to exhibit excellent properties like long exciton diffusion lengths (>350nm), and big exciton sizes (8.5(5)nm), which was substantiated by a simulation. We studied the adsorption processes at the surface of Single-Wall Carbon Nanotubes for molecules in the gas phase, solvent molecules, and surfactant molecules. The experiments were all carried out on suspended individualized carbon nanotubes on a silicon wafer substrate. The experiments in the gas-phase showed that the excitonic emission energy and intensity experiences a rapid blue shift during observation. This shift was associated with the spontaneous desorption of large clusters of gaseous molecules caused by laser heat up. The measurement of this desorption was essential for creating a reference to an initially clean surface and allows us to perform a comparison with previous measurements on this topic. Furthermore, the adsorption of hydrogen on the nanotube surface at high temperatures was investigated. It was found that a new emission mode arises slightly red-shifted to the excitonic emission in these systems. The new signal is almost equally strong as the main excitonic peak and was associated with the brightening of dark excitons at sp3-defects through a K-phonon assisted pathway. The finding is useful for the direct synthesis of spintronic devices as these systems are known to act as single-photon emitters. The suspended nanotubes were further studied to estimate the effect of solvent adsorption on the excitonic states during nanotube dispersion for each nanotube individually. A significant quantum yield loss is observable for hexane and acetonitrile, while the emission intensity was found to be the strongest in toluene. The reference to a clean surface allowed us to estimate the exact influence of the dielectric environment of adsorbing solvents on the excitonic emission energy. Solvent adsorption was found to lead to an energy shift that is almost twice as high as suggested in previous studies. The amount of this energy shift, however, was comparably similar for all solvents, which suggests that the influence of the distinct dielectric constant in the outer environment less significantly influences the energy shift than previously thought. An interesting phenomenon was found when using acetonitrile as a solvent, which leads to greatly enhanced emission properties. The emission is more than twice as high as in the same air-suspended nanotubes, which suggests a process that depends on the laser intensity. In this study, it was reasonably explained how an energy down-conversion is possible through the coupling of the excitonic states with solvent vibrations. The strength of this coupling, however, also suggests adsorptions to the inside of the tubular nanotube structure leading to a coupled vibration of linear acetonitrile molecules that are adsorbed to the inner surface. The findings are important for the field of nanofluidics and provide an excellent system for efficient energy down-conversion in the transmission window of biological tissue. Having separated the pure effect of solvent adsorption allowed us to study the undisturbed molecular adsorption of polymers in these systems. The addition of polyfluorene polymer leads to a slow but stepwise intensity increase. The intensity increase is overlapping with a concurrent process that leads to an intensity decrease. Unfortunately, observing the stepwise process has a low spacial resolution of only 100-250nm, which is in the range of the exciton diffusion length in these systems and hinders detailed analysis. The two competing and overlapping processes processes are considered to originate from slow π-stacking and fast side-chain binding. Insights into this process are essential for selecting suitably formed polymers. However, the findings also emphasize the importance of solvent selection during nanotube dispersion since solvent effects were proven to be far more critical on the quantum yield in these systems. These measurements can shed light on the ongoing debate on polymers adsorption during nanotube individualization and allow us to direct the discussion more towards the selection of suitable solvents. This work provides fundamental insights into the adsorption of various molecules on the surface of individually observed suspended Single-Wall Carbon Nanotubes. It allows observing the adsorption of individual molecules below the optical limit in the solid, liquid, and gas phases. Nanotubes are able to act as sensing material for detecting changes in their direct surrounding. These fundamental findings are also crucial for increasing the quantum yield of solvent-dispersed nanotubes. They can provide better light-harvesting systems for microscopy in biological tissue and set the base for a more efficient telecommunication infrastructure with nano-scale spintronics devices and lasing components. The newly discovered solvent alignment in the nanotube surrounding can potentially also be used for supercapacitors that are needed for caching the calculation results in computational devices that use polymer wrapped nanotubes as transistors. Although fundamental, these studies develop a strategy to enlighten this room that is barely only visible at the bottom of the nano-scale.
Fulminic acid, HCNO, was first synthesized in the year 1800 and has since then been used numerous times to develop new chemical theories and concepts. Nowadays, research on HCNO is mainly motivated due to its detection in interstellar space in the year 2009. In this thesis, we investigated the interaction of fulminic acid with VUV- and soft X-ray radiation, i.e., radiation that is also present in the interstellar medium. In our study using VUV radiation, we were able to record the photoelectron spectrum of HCNO with high resolution and we were able to simulate the Renner-Teller distorted ground state of the cation using simulation of wavepacket dynamics. We also elucidated the mechanism of the dissociative photoionisation up to 15.3 eV binding energy. Using soft X-ray radiation enables us to ionise or excite the 1s electrons of HCNO. The created state can decay via an Auger-Meitner process, which produces an Auger electron. We measured the kinetic energy of these auger electron and were able to analyse the observed signals using quantum chemical calculations. We also investigated how the ion fragments after the Auger-Meitner process. We observed a site-selectivity, where the initial ionisation/excitation site influenced the product distribution. We were able to explain this observation with a simple thermodynamic argument. This thesis provides a comprehensive description of the interaction of HCNO with ionising radiation. The obtained data may be valuable for the description of the behaviour of HCNO in interstellar space.
Im Rahmen der vorliegenden Arbeit wurde durch einzelmolekülspektroskopischer bzw. -mikroskopischer Methoden in Kombination mit einer mikrofluischen Zel- le unter Potenzialkontrolle die Elektrochemie von einzelnen einwandigen (6,5)- Kohlenstoffnanoröhren untersucht. Hierfür wurde ein Nahinfrarot-Photolumineszenz- Mikroskop aufgebaut und eine speziell an die experimentellen Vorgaben angepasste elektrochemische Zelle entwickelt, insofern als drei Elektroden (Arbeits-, Gegen- und Referenzelektrode) in einen mikrofluidischen Chip integriert wurden. Darüber hinaus war für die Durchführung der Experimente unter Wasser- und Sauerstoffaus- schluss die Konstruktion eines Handschuhkastens notwendig, sowie eine allgemeine Vorbehandlung der Elektrolytlösungen zur Entfernung gelöster Gase und Wasserreste.
Ein weiteres Projekt umfasste den Aufbau einer chemischen Gasphasenabschei- dungsapparatur zur Synthese von Kohlenstoffnanoröhren. Die hierbei durchgeführten Experimente erbrachten Klarheit über den Einfluss der Prozessparameter Druck, Temperatur und Durchflussrate an Edukten.
Aus den PL-Intensitätsänderungen bei Potenzialvariation konnten Reduktions- und Oxidationspotenziale (ERed = 0.15 V; EOx = 1.34 V) einzelner (6,5)-SWNTs gegen- über einer Platin Referenzelektrode und einem daraus resultierenden Redoxpotenzial
von ∆ERedOx = 1.19 V ermittelt werden. Durch diese einzelmolekülspektroskopische
Methode konnte zum einen gewährleistet werden, dass nur dieser spezielle Chira- litätstyp untersucht wurde und zum anderen eine Verfälschung der Resultate durch einen Potenzialabfall wie er typischerweise in CNT-Filmen auftritt aussgeschlossen werden. Eine Kombination der PL-Daten mit der Ramanintensitätsabhängigkeit des (6,5)-SWNT-S2-Übergangs bei Potenzialvariation erlaubte eine genauere Analyse des Löschmechanismus der PL von Kohlenstoffnanoröhren. Mithilfe eines von Her- tel et al. entwickelten diffusionslimitierten Stoßdesaktivierungsmodells konnte eine invers-quadratische Proportionalität zwischen der (6,5)-SWNT-Emission und den spannungsinduzierten Ladungsträgern ausgemacht werden. Auf Grundlage dieses Ergebnisses folgt, dass die über Photolumineszenzänderungen ermittelten Reduktions-und Oxidationswerte nicht mit den Bandkanten der CNTs übereinstimmen müssen, und dass für deren Bestimmung vielmehr auf Raman- bzw. Absorptionsspektroskopi- sche Techniken zurückgegriffen werden muss.
Die einzelmolekülspektroskopische Herangehensweise ermöglichte ferner eine statis- tische Analyse der Verteilung der Reduktions- und Oxidationspotenziale im Vergleich zu den jeweiligen Erwartungswerten. Hierdurch konnte eine Einteilung der Modifika- tionseinflüsse auf das SWNT-Redoxverhalten in zwei Grenzfälle erfolgen. Es wurde angenommen, dass diese als “Dispergiermitteleffekte” und “CNT-Strukturdefekte” be- zeichneten Auswirkungen entweder das Resultat einer heterodispersen Verteilung an DOC auf der CNT-Oberfläche oder eine Folge von Defekten in der CNT-Gitterstruktur waren. In diesem Zusammenhang ergab sich aus der interpartikulären Analyse der Reduktions- und Oxidationswerte eine Korrelation, die einem dominierenden Einfluss der “CNT-Strukturdefekte” zugeordnet werden konnte. Dieser Beobachtung entgegen- gesetzt konnten aber auch über Untersuchungen der Redoxpotenziale innerhalb einer (6,5)-SWNT lokale Bereiche ausgemacht werden, die eine signifikante Abhängigkeit von “Dispergiermitteleffekte” aufwiesen.
Abgesehen von diesen Einflüssen auf den Emissionsverlauf wurde auch eine Be- trachtung der Breite des spannungsgesteuerten Emissionsabfall durchgeführt. Da- raus konnte ermittelt werden, dass diese Ausdehnung eine Konsequenz aus der PL- Löschungseffizienz der Ladungsträger ist und, dass bei einer Verteilung von 0.32 Löschzentren pro Nanometer eine vollständige Abnahme der Photolumineszenzinten- sität induziert wird.
Darüber hinaus wurde im Rahmen dieser Arbeit das redoxchemische Verhalten in- dividueller (6,5)-SWNTs in Wechselwirkung mit Ferrocenmolekülen untersucht. Die erhaltenen Ergebnisse ließen annehmen, dass die sich ausbildende Verbindung nicht-kovalenter Natur ist. Zwei verschiedene Gründe führten zu dieser Erkennt- nis: einerseits ließen sich die Ferrocenmoleküle von der CNT-Oberfläche durch ein Durchspülen des mikrofluidischen Kanals mit einer reinen DMF-Lösung entfernen und andererseits war keine dauerhafte Emissionsminderung durch die Ausbildung kovalenter Bindungen zu beobachten. Aus der potenzialabhängigen PL wurde zudem ein Elektronentransfer der Ferrocenmoleküle in die optisch generierten Löcher des CNT-Valenzbandes festgestellt und über eine anregungsintensitätsabhängige Messung die Zunahme dieses Ladungstransfers bei steigendem Photonenfluss nachgewiesen.
Hinsichtlich der Anwendung von Kohlenstoffnanoröhren zur Elektrolyse bzw. Photo- lyse von Wasser wurde auch die Redoxchemie von (6,5)-SWNTs in diesem Solvens untersucht. Bezüglich der Emissionsintensität konnte gezeigt werden, dass diese im Vergleich zu organischen Lösungsmitteln reduziert vorliegt. Außerdem wurde eine irreversible Reaktion nach anodischer Polarisation über eine dauerhafte Löschung der PL beobachtet. Die Bestimmung der hierfür notwendigen Reaktionsumstände erbrachte, dass Wasser, Exzitonen (erzeugt durch optische Anregung) und spannungs- induzierte Löcher im Valenzband zur Bildung einer [SWNT(Q)]-Spezies führen, welche die irreversible Minderung der CNT-Emission verursacht. Darüber hinaus konnte die Reaktionsgeschwindigkeit über eine Kinetik pseudo-nullter-Ordnung be- schrieben werden, unter der Voraussetzung, dass die soeben genannten Parameter konstant verblieben. Desweiteren zeigte sich in einer ferrocenhaltigen Lösung, dass der Löscheffekt der [SWNT(Q)]-Spezies im anodischen Potenzialbereich teilweise reduziert wird. Es wurde angenommen, dass diese Beobachtung auf eine Oxidation der Löschzentren durch die Fc+-Kationen gründet.
Mit Hilfe der CVD-Apparatur gelang es Kohlenstoffnanoröhren zu synthetisieren, wobei Ethanol als Kohlenstoffquelle und ein Eisen-Kobalt-Zeolith-Gemenge als Ka- talysator diente. Die Analyse der verschiedenen Prozessparameter zeigte, dass bei T = 750 °C das beste Verteilungsverhältnis zwischen den gewünschten (6,5)-SWNTs und anderen CNT-Chiralitäten bzw. dem amorphen Kohlenstoff vorliegt. Hierfür war, dass bei T < 750 °C die Verbrennung unerwünschter amorpher Kohlenstoffreste nur geringfügig stattfindet, und dass bei T > 750 °C die Bildung anderer Chiralitäten mit größerem Durchmesser als die (6,5)-SWNT bevorzugt wurde. Die Variation der Durchflussrate hingegen wirkte sich nur in einer absoluten Zunahme aller Chirali- täten aus. Die Steigerung des (6,5)-SWNT-Anteils für höhere Durchflüsse gelang trotzdem durch die geschickte Auswahl geeigneter Druck- und Temperaturwerte. Die Experimente zur Untersuchung der Druckabhängigkeit wiesen auf eine Relation mit dem Gesetz von Le Chatelier hin, insofern als bei einer Druckverringerung eine Verschiebung der Ethanol-Crackreaktion auf Produktseite stattfand. In diesem Zusam- menhang wurde angenommen, dass die damit verstärkt gebildeten Moleküle Ethan, Ethen und Methan den CNT-Anteil zwar erhöhen, jedoch auch eine Steigerung der amorphen Kohlenstoffkonzentration verursachen. Dementsprechend ergab ein Druck von p = 9 mbar das beste (6,5)-SWNT zu dem amorphen Kohlenstoffverhältnis.
Anhand der Arbeiten in dieser Dissertation sind neue Erkenntnisse zwischen der PL-Sensitivität von (6,5)-SWNTs und deren Ladungszustand erhalten worden. Insbe- sondere die genaue Bestimmung der Korrelation zwischen der Photolumineszenz und den induzierten Ladungsträgern ermöglicht einen gezielteren Einsatz von Kohlenstoff- nanoröhren – so zum Beispiel im Bereich der Sensorik. In diesem Zusammenhang zeigen auch die interpartikulären Analysen der Redoxpotenzialverteilung die genau- en Auswirkungen vom Lösungsmittel und der Defektdichte auf die elektronische Struktur der CNTs auf. Darüber hinaus kann aus der Ursachenbestimmung für die Varianz der literaturbekannten Reduktions- bzw. Oxidationspotenziale fortan die ge- eignete spektroskopische Methode zur Evaluierung der Position von Leitungs- und Valenzband in Kohlenstoffnanoröhren besser eingegrenzt werden. Die spektroelektro- chemischen Analysen von (6,5)-SWNTs im Lösungsmittel Wasser und speziell die Bestimmung der Kinetik für die auftretende Reaktion liefern einen tieferen Einblick in die Wechselwirkung (6,5)-SWNT-H2O. Diese Ergebnisse sind insbesondere bei der Verwendung von Kohlenstoffnanoröhren als Elektrodenmaterial für die photolytische bzw. elektrolytische Spaltung von Wasser in Wasserstoff und Sauerstoff von Bedeu- tung. Neben der Untersuchung der SWNT-Wasser Interaktion unter andoischer und optischer Anregung, die zu einer kovalenten Bindung führte, wurde mit Hilfe der (6,5)- SWNT-Ferrocen Wechselwirkung ein Beispiel für eine nichtkovalente Redoxreaktion dargestellt, womit ein Vergleich dieser beiden Spezies und ihrer unterschiedlichen Auswirkungen auf die elektronische Struktur aufgezeigt werden konnte.
Der Schwerpunkt dieser Arbeit lag auf der spektroelektrochemischen Untersuchung von halbleitenden SWNTs. Hierbei wurden erstmalig Absorptions- und Photolumineszenzspektren ein und derselben SWNT-Probe simultan unter elektrochemischer Potentialkontrolle aufgenommen. Hierbei konnte gezeigt werden, dass die Messmethode einen entscheidenden Einfluss auf die erhaltene Bandlücke besitzt und der in der Literatur geprägte Begriff der Elektrochemischen Bandlücke aufgrund einer fehlenden allgemeingültigen Definition problembehaftet ist. So ergeben Photolumineszenzmessungen im Vergleich zu Raman- oder Absorptionsmessungen die kleinste Bandlücke. Dies wurde auf die diffusionskontrollierte Löschung der Exzitonen an Ladungszentren zurückgeführt. Weiterhin wurden die optischen Spektren von SWNTs unter Ladungseinfluss analysiert und die zugrundeliegenden Änderungen der elektronischen Eigenschaften diskutiert.
Neben SWNTs wurden die Übergangsmetalldichalkogenide MoS2 und WS2 spektroelektrochemisch untersucht. Auffallend im Vergleich zu den Messungen an SWNTs war der breite Potentialbereich, über den die Abnahme der exzitonischen Signale zu beobachten war. Dies kann auf die unterschiedliche elektronische Struktur von TMDs und SWNTs und den geringen Anteil von Einzellagen in den TMD-Proben zurückgeführt werden. Weiterhin konnte in den Absorptionsspektren unter Ladungseinfluss ein Signal beobachtet werden, welches auf die Entstehung von Trionen hindeutet.
In einem weiteren Teilprojekt wurde eine elektrochemische Zelle zur Untersuchung von metallischen SWNT-Filmen als Elektrode für die Wasserstoffproduktion entwickelt und getestet. Hierbei gelang es die von Das et al. publizierte Aktivierung von SWNTs mit Schwefelsäure erfolgreich nachzuvollziehen und einen katalytischen Effekt der SWNTs auf die Wasserstoffentwicklung zu beobachten.
In dieser Arbeit wurde der elektronische Grundzustand und der erste angeregte Zustand sowie der Zustand des Ions von substituierten [2.2]Paracyclophanen untersucht. Um die Wechselwirkungen zwischen konjugierten pi-Systemen besser zu verstehen wurden die Moleküle mit Hilfe von Resonance Enhanced Multiphoton Ionization Spektroskopie (REMPI), VUV-Synchrotronstrahlung und quantenchemischen Rechnungen untersucht. Die Experimente wurden im Molekularstrahl durchgeführt. In den [1+1]-REMPI-Spektren von pseudo-para-Dibrom[2.2]paracyclophan, pseudo-para-Dicyano[2.2]paracyclophan, pseudo-ortho-Dicyano[2.2]paracyclophan, pseudo-para-Diphenyl[2.2]paracyclophan und pseudo-para-Di(trimethylsilyl)[2.2]paracyclophan wird ein kontinuierlicher Signalanstieg beobachtet. Individuelle Schwingungsbanden konnte nicht aufgelöst werden. Dies ist ein Hinweis darauf, dass die Schwingungszustände im S1-Zustand sehr eng beieinanderliegen. Der Schwerpunkt dieser Arbeit lag auf der Untersuchung der hydroxysubstituierten [2.2]Paracyclophane pseudo-ortho-Dihydroxy[2.2]paracyclophan (o-DHPC), pseudo-para-Dihydroxy[2.2]paracyclophan (p-DHPC) und racemisches-4-Hydroxy[2.2]paracyclophan (MHPC). Die adiabatischen Ionisierungsenergien der Moleküle wurden aus der Ionenstromkurve mit Hilfe eines Wannier-Fits bestimmt: 7.56eV (o-DHPC), 7.58eV (p-DHPC) und 7.63eV (MHPC). In den Schwellenphotoelektronenspektren (TPES) werden Signalmodulationen im Photonenenergiebereich von 7.8-11eV beobachtet. Hierbei handelt es sich um angeregte Zustände des Kations. Bei ca. 10.5eV wird in den Spektren von allen drei hydroxysubstituierten Molekülen dissoziative Photoionisation (DPI) beobachtet. Hierbei werden die Bindungen zwischen den aliphatischen Kohlenstoff-Atomen gebrochen. Im [1+1]-REMPI-Spektrum des o-DHPCs wird der S1<-S0-Übergang bei 31483cm^-1 (3.903eV) beobachtet. Die berechnete adiabatische Anregungsenergie liegt bei 3.87eV (SCS-CC2). Der elektronische Ursprung des o-DHPCs ist +722cm^-1 blauverschoben im Vergleich zum unsubstituierten [2.2]Paracyclophan (PC). Im REMPI-Spektrum werden viele Schwingungsbanden beobachtet. Cluster des o-DHPCs mit Wasser werden ebenfalls beobachtet. Die elektronischen Ursprünge der Cluster mit Wasser sind rotverschoben im Vergleich mit dem Monomer. Im o-DHPC(H2O)-Cluster ist das Wassermolekül zwischen den beiden OH-Gruppen des Cyclophans über Wasserstoffbrückenbindungen fixiert. In den REMPI-Spektren des o-DHPCs und o-DHPC(H2O)-Clusters wird die Atmungsmode mit hoher Intensität beobachtet. Außerdem tritt eine Twist- und Tilt-Mode in den Spektren auf. Viele Kombinationsbanden der Atmungs, Twist- und Tilt-Mode werden in den Spektren beobachtet. Im [1+1]-REMPI-Spektrum des p-DHPCs werden nur kleine Signalmodulationen mit niedrigen Intensitäten im roten Spektralbereich im Vergleich mit dem Ursprung des o-DHPCs beobachtet. Bei der Anregung des p-DHPCs kommt es zu einer großen Änderung der Struktur. Dies führt dazu, dass die Franck-Condon-Faktoren für den S1<-S0-Übergang des p-DHPCs deutlich kleiner sind im Vergleich mit dem o-DHPC (1:10^7). Daher treten die Signale des p-DHPCs im REMPI-Spektrum nur mit geringer Intensität auf. Der Ursprung des S1<-S0 Übergangs des MHPCs wird im [1+1]-REMPI-Spektrum bei 30772cm^-1 (3.815eV) beobachtet. Die berechnete Anregungsenergie liegt bei 3.79eV (SCS-CC2). Im Vergleich zum unsubstituierten PC wird keine wesentliche Energieverschiebung des S1<-S0-Übergangs beobachtet. Im REMPI-Spektrum des MHPCs wird die Twist-Mode beobachtet. Die Banden zeigen eine inverse Anharmonizität. Die ab-initio-Rechnungen beschreiben die Potentialkurve des S1-Zustands mit einem Doppelminimum. Die Höhe der Barriere zwischen den beiden Minima hängt vom Basissatz ab. Empirisch wurde entlang der Twist-Mode ein flaches Potential bestimmt. Die aus diesem Potenzial resultierenden Banden und Intensitäten der Twist-Mode stimmen mit den experimentellen Beobachtungen sehr gut überein. Die [1+1]-REMPI-Spektren des MHPCs mit einem und zwei Wassermolekülen zeigen einen kontinuierlichen Signalanstieg. Einzelne Schwingungsbanden konnten unter den experimentellen Bedingungen nicht aufgelöst werden. Der Ursprung des MHPC-Clusters mit einem Wassermolekül beginnt bei ca. -180cm^-1 und mit zwei Wassermolekülen bei ca. -290cm^-1 im Vergleich mit dem Ursprung des Monomers.
Femtosekunden-zeitaufgelöste transiente Absorptionsspektroskopie einer neutralen organischen gemischtvalenten Verbindung In einem Femtosekunden-zeitaufgelösten Anrege-Abfrage-Experiment wurde die Dynamik des Elektronentransfers einer neutralen organischen gemischtvalenten Verbindung untersucht. Neben der Abhängigkeit des Rückelektronentransfers von der Solvenspolarität wurde auch die Rotationsdiffusion in n-Hexan, Toluol, Dibutylether, tert-Butylmethylether und Benzonitril studiert. Die transiente Dynamik lässt sich mit einer Lebensdauer beschreiben, verursacht durch einen Rückelektronentransfer. Während dieser in unpolaren Lösemitteln relativ langsam verläuft, beobachtet man deutlich schnellere ET-Raten mit steigender Polarität des Lösemittels. Die Lebensdauer variiert von 1.2 ps für Benzonitril bis 260 ps für n-Hexan. Rotationsdiffusion konnte nicht beobachtet werden. Die gemessenen Raten wurden mit theoretischen Raten verglichen. Für unpolare Lösemittel konnte eine gute Übereinstimmung gefunden werden. In polaren Lösemitteln bewirkt eine Korrektur, die die Solvensrelaxationszeit berücksichtigt, eine sehr gute Übereinstimmung von berechneten und gemessenen Rückelektronentransferraten. Zeit- und frequenzaufgelöste Photoionisation des C 2A2-Zustandes des Benzylradikals Die Lebensdauer des C 2A2-Zustandes des Benzylradikals wurde in Abhängigkeit der Überschussenergie bestimmt. Die zeitabhängigen Ionensignale konnten dabei mit einer biexponentiellen Dynamik beschrieben werden. Bei einer Anregung am Ursprung (305nm) betragen die Lebensdauern τ1= 400 fs und τ2 = 4.5 ps. Die kürzere Lebensdauer τ1 beschreibt die interne Konversion vom C-Zustand zu den stark koppelnden A/B-Zuständen, die längere Lebensdauer τ2 die interne Konversion von den A/B-Zuständen in den elektronischen Grundzustand. Mit steigender Anregungsenergie beobachtet man eine stete Abnahme beider Lebensdauern. Bei einer Anregung mit einem Puls der Wellenlänge von 301 nm beobachtet man deutlich kürzere Lebensdauern mit τ1 = 350 fs und τ2 = 2.8 ps. Erfolgt die Anregung mit einem Puls der Wellenlänge von 298 nm, betragen die Zeitkonstanten τ1 = 180 fs und τ2 = 2.1 ps. Desweiteren konnte ein zeitabhängiges Ionensignal für eine Spezies mit der Zusammensetzung C7H5 beobachtet werden. Der Träger des Signals ist das Fulvenallenylradikal.
In der vorliegenden Arbeit wurden zwei spektroskopische Methoden (Raman- und Circulardichroismus-Spektroskopie) und die Kernspinresonanz zur Untersuchung der Sekundärstruktur von synthetischen Polypeptiden eingesetzt. Dabei wurden die Struktur-Funktions-Beziehungen der dritten extrazellulären Schleife des Gonadotropin-freisetzenden Rezeptors (GnRH-R) untersucht. Die spektroskopischen Ergebnisse belegten, dass die zuvor getroffene Aussage über eine vorhandene helikale Struktur revidiert werden musste. Die Strukturanalysen mit Hilfe der CD-, Raman- und 2D NMR-Experimente an zwei Serien von Polypeptiden lieferten Aussagen über die Sekundärstruktur. Insbesondere die Raman-Untersuchungen in Verbindung mit einer statistischen Datenanalyse lieferten detaillierte Information über subtile Konformationsänderungen, die einerseits durch die Addition und andererseits durch die Substitution einzelner Aminosäuren in den synthetischen Polypeptiden ausgelöst wurden. Anhand der ausgewählten Raman-Linien konnte nachgewiesen werden, dass sowohl die Änderungen der Polypeptidkettenlänge als auch die Änderung der Polypeptidsequenzen mit den beobachteten Intensitäten der Raman-Linien korreliert sind.
Ziel dieser Arbeit war es, die Möglichkeiten zur Verwendung des Auges bzw. der Augenvorderkammer als spektroskopische Zelle für nicht-invasive In-vivo-Messungen zu untersuchen. Dabei stand vor allem die Geräte-technische Umsetzung und die Entwicklung geeigneter Auswertestrategien im Vordergrund. In dieser Arbeit konnte gezeigt werden, dass die spektroskopische Untersuchung von Kammerwasser-Substanzen möglich ist. Durch den Einsatz der UV/VIS-Spektroskopie konnte Fluorescein in vivo bestimmt werden. Die Anwendung der NIR-Spektroskopie eignet sich vor allem zur Bestimmung von Glucose im Kammerwasser. Die Güte der Glucose-Bestimmung ist von verschiedenen Faktoren abhängig, wie z. B. dem verwendeten Gerät, den Parameter der Auswertung und der Temperatur. Für weitergehende Studien sollten daher die in dieser Arbeit aufgedeckten Probleme und Strategien beachtet werden.
Time-resolved spectroscopy allows for analyzing light-induced energy conversion and
chromophore–chromophore interactions in molecular systems, which is a prerequisite in
the design of new materials and for improving the efficiency of opto-electronic devices.
To elucidate photo-induced dynamics of complex molecular systems, transient absorption
(TA) and coherent two-dimensional (2D) spectroscopy were employed and combined
with additional experimental techniques, theoretical approaches, and simulation models
in this work.
A systematic series of merocyanines, synthetically varied in the number of chromophores
and subsitution pattern, attached to a benzene unit was investigated in cooperation with
the group of Prof. Dr. Frank Würthner at the University of Würzburg. The global analysis
of several TA experiments, and additional coherent 2D spectroscopy experiments, provided
the basis to elaborate a relaxation scheme which was applicable for all merocyanine
systems under investigation. This relaxation scheme is based on a double minimum on the
excited-state potential energy surface. One of these minima is assigned to an intramolecular
charge-transfer state which is stabilized in the bis- and tris-chromophoric dyes by
chromphore–chromophore interactions, resulting in an increase in excited-state lifetime.
Electro-optical absorption and density functional theory (DFT) calculations revealed a
preferential chromophore orientation which compensates most of the dipole moment of
the individual chromophores. Based on this structural assignment the conformationdependent
exciton energy splitting was calculated. The linear absorption spectra of the
multi-chromophoric merocyanines could be described by a combination of monomeric and
excitonic spectra.
Subsequently, a structurally complex polymeric squaraine dye was studied in collaboration
with the research groups of Prof. Dr. Christoph Lambert and Prof. Dr. Roland Mitric
at the University of Würzburg. This polymer consists of a superposition of zigzag and
helix structures depending on the solvent. High-level DFT calculations confirmed the previous
assignment that zigzag and helix structures can be treated as J- and H-aggregates,
respectively. TA experiments revealed that in dependence on the solvent as well as the
excitation energy, ultrafast energy transfer within the squaraine polymer proceeds from
initially excited helix segments to zigzag segments or vice versa. Additionally, 2D spectroscopy
confirmed the observed sub-picosecond dynamics. In contrast to other conjugated
polymers such as MEH-PPV, which is investigated in the last chapter, ultrafast
energy transfer in squaraine polymers is based on the matching of the density of states
between donor and acceptor segments due to the small reorganization energy in cyanine-like
chromophores.
Finally, the photo-induced dynamics of the aggregated phase of the conjugated polymer
MEH-PPV was investigated in cooperation with the group of Prof. Dr. Anna Köhler at the University of Bayreuth. Our collaborators had previously described the aggregation of MEH-PPV upon cooling by the formation of so-called HJ-aggregates based on exciton
theory. By TA measurements and by making use of an affiliated band analysis distinct
relaxation processes in the excited state and to the ground state were discriminated. By
employing 2D spectroscopy the energy transfer between different conjugated segments
within the aggregated polymer was resolved. The initial exciton relaxation within the
aggregated phase indicates a low exciton mobility, in contrast to the subsequent energy
transfer between different chromophores within several picoseconds.
This work contributes by its systematic study of structure-dependent relaxation dynamics
to the basic understanding of the structure-function relationship within complex
molecular systems. The investigated molecular classes display a high potential to increase
efficiencies of opto-electronic devices, e.g., organic solar cells, by the selective choice of
the molecular morphology.