Refine
Has Fulltext
- yes (25)
Is part of the Bibliography
- yes (25)
Year of publication
Document Type
- Doctoral Thesis (25)
Keywords
- Organischer Halbleiter (25) (remove)
Institute
ResearcherID
- D-1250-2010 (1)
Kavitäts-Exziton-Polaritonen (Polaritonen) sind hybride Quasiteilchen, die sich aufgrund starker Kopplung von Halbleiter-Exzitonen mit Kavitätsphotonen ausbilden. Diese Quasiteilchen weisen eine Reihe interessanter Eigenschaften auf, was sie einerseits für die Grundlagenforschung, andererseits auch für die Entwicklung neuartiger Bauteile sehr vielversprechend macht. Bei Erreichen einer ausreichend großen Teilchendichte geht das System in den Exziton-Polariton-Kondensationszustand über, was zur Emission von laserartigem Licht führt. Organische Halbleiter als aktives Emittermaterial zeigen in diesem Kontext großes Potential, da deren Exzitonen neben großen Oszillatorstärken auch hohe Bindungsenergien aufweisen. Deshalb ist es möglich, unter Verwendung organischer Halbleiter selbst bei Umgebungsbedingungen äußerst stabile Polaritonen zu erzeugen. Eine wichtige Voraussetzung zur Umsetzung von integrierten opto-elektronischen Bauteilen basierend auf Polaritonen ist der kontrollierte räumliche Einschluss sowie die Realisierung von frei konfigurierbaren Potentiallandschaften. Diese Arbeit beschäftigt sich mit der Entwicklung und der Untersuchung geeigneter Plattformen zur Erzeugung von Exziton-Polaritonen und Polaritonkondensaten in hemisphärischen Mikrokavitäten, in die organische Halbleiter eingebettet sind.
This thesis addresses the identification and characterization of spin states in optoelectronic materials and devices using multiple spin-sensitive techniques. For this purpose, a systematic study focussing on triplet states as well as associated loss pathways and excited state kinetics was carried out. The research was based on comparing a range of donor:acceptor systems, reaching from organic light emitting diodes (OLEDs) based on thermally activated delayed fluorescence (TADF) to organic photovoltaics (OPV) employing fullerene and multiple non-fullerene acceptors (NFAs). By developing new strategies, e.g., appropriate modeling, new magnetic resonance techniques and experimental frameworks, the influence of spin states in the fundamental processes of organic semiconductors has been investigated. Thereby, the combination of techniques based on the principle of electron paramagnetic resonance (EPR), in particular transient EPR (trEPR) and optically detected magnetic resonance (ODMR), with all-optical methods, such as transient electroluminescence (trEL) and transient absorption (TA), has been employed. As a result, excited spin states, especially molecular and charge transfer (CT) states, were investigated in terms of kinetic behavior and associated pathways, which revealed a significant impact of triplet states on efficiency-limiting processes in both optoelectronic applications.
Die Struktur und die elektronischen Eigenschaften organischer Halbleiter sind für die Herstellung organischer Bauelemente von entscheidender Bedeutung. Da diese gerade durch das Wachstum der organischen Molekülfilme nachhaltig beeinflusst werden, ist ein Verständnis der Wachstumsmechanismen zur Herstellung organischer Halbleiterbauelemente unabdingbar. Von besonderem Interesse sind die ultradünnen organischen Filme, die aus nur wenigen Moleküllagen bestehen. Gerade bei diesen kommt es auf die homogene Dichte der Filme, Domänen, Kristallite sowie deren Grenzen und Orientierungen an. In dieser Arbeit werden das Wachstum und die entstehenden Strukturen zweier organischer Moleküle untersucht: PTCDA und das eng mit diesem verwandte NTCDA. Als Substrate kommen die (111)-Oberflächen von Silber- und Gold-Einkristallen zum Einsatz. Bei allen vier Modellsystemen bilden die Moleküle lateral hochgeordnete Filme auf den Oberflächen aus. Die Untersuchungen wurden mit dem Spektromikroskop mit Aberrationskorrektur für viele relevanten Techniken (SMART) an der Synchrotronstrahlungsquelle BESSY II durchgeführt. Dieses Gerät erlaubt, die unterschiedlichsten Untersuchungsmethoden der Oberflächenphysik ortsaufgelöst und in Echtzeit an einer Probe in situ anzuwenden. Es kamen sowohl mikroskopische (Hg-PEEM, X-PEEM, LEEM), beugende (LEED), als auch spektroskopische Methoden (NEXAFS, PES) zum Einsatz. Für PTCDA ergeben die Experimente, dass es in Abhängigkeit von der Substrattemperatur auf beiden Oberflächen ein Franck-van der Merwe- (Lage-für-Lage-) oder ein Stranski-Krastanov-Wachstum (dreidimensionale Inseln auf einem geschlossenen Film) zeigt. In beiden Fällen sind die Moleküle innerhalb der einzelnen Lagen und Inseln parallel zum Substrat orientiert. Das Wachstum wird neben der Substrattemperatur auch nachhaltig von der Morphologie des Substrates beeinflusst, da die Filme auf ebenen Terrassen schneller wachsen als auf Stufenkanten oder -bündeln. Die Beweglichkeit der Moleküle erklärt den Einfluss beider Wachstumsfaktoren. Die hohe laterale Ordnung der Filme spiegelt sich auch in sehr großen Domänen wider. Auf Ag(111) ist die PTCDA-Monolage chemisorptiv, auf Au(111), so wie die Multilagen beider Systeme, physisorptiv gebunden. Beim NTCDA konnte das Wachstum der relaxierten Monolage auf der Ag(111)-Oberfläche sowie der Phasenübergang zur komprimierten Monolage direkt beobachtet werden. Innerhalb beider Strukturen sind die Moleküle parallel zur Substratoberfläche orientiert. Die anschließend aufwachsende Bilage ist bei Temperaturen oberhalb der Raumtemperatur metastabil und nur unter andauerndem Molekülfluss beobachtbar. Für die Bilage wird ein mittlerer Verkippungswinkel der Moleküle gegenüber der Substratoberfläche von etwa 45° gefunden. Die anschließend aufwachsenden dreidimensionalen Inseln zeigen unterschiedliche Orientierungen und bestehen jeweils aus einer einzigen Domäne. Die Ausbildung so großer Domänen im Mikrometerbereich wird dadurch erklärt, dass die Moleküle oberhalb der Monolage in einer volumenartigen Phase in dreidimensionalen Inseln wachsen. Basierend auf ortsaufgelösten NEXAFS- und LEED-Messungen wird ein Strukturmodell vorgeschlagen, das die Messungen mit einer einzigen volumenartigen Phase erklären kann, wobei die Kristallite eine einheitliche Ausrichtung senkrecht zur Substratoberfläche aufweisen, bezüglich der Oberflächennormalen jedoch gegeneinander verdreht sind. Ob jedoch die Ausrichtung aller Inseln gleich dieser ist, ob einzelne Inseln unterschiedliche Ausrichtungen zeigen, oder ob sogar eine Art von Polymorphismus vorliegt, lässt sich mit den vorliegenden Ergebnissen nicht endgültig klären, auch wenn alles auf ein Vorhandensein einer Mischung der Modelle hindeutet. Die auf beiden Oberflächen beobachtete hohe Beweglichkeit der Moleküle deutet auf eine schwache laterale Korrugation des vertikalen Potenzials hin.
Besides established, conventional inorganic photovoltaics—mainly based on silicon—organic photovoltaics (OPV) are well on the way to represent a lowcost, environment friendly, complementary technology in near future. Production costs, solar cell lifetime and performance are the relevant factors which need to be optimized to enable a market launch of OPV. In this work, the efficiency of organic solar cells and their limitation due to charge carrier recombination are investigated. To analyze solar cells under operating conditions, time-resolved techniques such as transient photovoltage (TPV), transient photocurrent (TPC) and charge extraction (CE) are applied in combination with time delayed collection field (TDCF) measurements. Solution processed and evaporated samples of different material composition and varying device architectures are studied. The standard OPV reference system, P3HT:PC61BM, is analyzed for various temperatures in terms of charge carrier lifetime and charge carrier density for a range of illumination intensities. The applicability of the Shockley Equation for organic solar cells is validated in case of field-independent charge photogeneration. In addition, a consistent model is presented, directly relating the ideality factor to the recombination of free with trapped charge carriers in an exponential density of states. An approach known as j=V reconstruction enables to identify the performance limiting loss mechanism of as-prepared and thermally treated P3HT:PC61BM solar cells. This procedure, involving TPV, CE and TDCF measurements, is extended to samples based on the rather new, low-band gap polymer PTB7 in combination with PC71BM. While in the devices processed from pure chlorobenzene solution considerable geminate and nongeminate losses are observed, the use of a solvent additive facilitates efficient polaron pair dissociation minimizing geminate recombination. Finally, in collaboration with the IMEC institute in Leuven, the two main organic solar cell device architectures, planar and bulk heterojunction—both based on CuPc and C60—are directly compared in terms of nongeminate recombination and charge carrier distribution. Two experimental techniques, TPV and CE, as well as a macroscopic device simulation are applied to reveal the origin of different Voc vs. light intensity dependence.
Das Wissen um die strukturellen und elektronischen Eigenschaften verborgener Metall-Organik-Grenzflächen ist entscheidend für die Optimierung und Verbesserung der Leistungsfähigkeit von auf organischen Halbleitern basierenden Bauteilen. In der vorliegenden Arbeit wurde ein Delaminationskonzept für das Ultrahochvakuum (UHV) umgesetzt und optimiert, mit dessen Hilfe an Modellsystemen verborgene Grenzflächen für oberflächensensitive Methoden zugänglich gemacht und im Anschluss hinsichtlich ihrer elektronischen und topographischen Eigenschaften untersucht wurden. Die Erfahrungen und Ergebnisse dieser Arbeit stellen im Bezug auf Untersuchungen und die Optimierung von organischen Bauteilen und ihre verborgenen Grenzflächen einen neuartigen Zugang dar. Der erste Schwerpunkt der Arbeit befasste sich am Beispiel von verborgenen Metall/NTCDA- und Metall/ PTCDA-Grenzflächen mit der Frage, wie verborgene Grenzflächen erfolgreich für oberflächensensitive Methoden zugänglich gemacht werden können. Nach einer Eruierung eines Klebstoffs, dessen Eigenschaften den Anforderungen hinsichtlich der Festigkeit, Verarbeitung und UHV-Tauglichkeit genügt, konnte gezeigt werden, dass es mit ausreichender Sorgfalt möglich ist, einen unmittelbaren Zugang zu verborgenen Grenzflächen zu erhalten. Es konnten dabei Kontakte von ca. 10 × 15 mm2 Größe offengelegt werden. Dabei zeigte sich auch, dass der Klebstoff für die Qualität der Delamination eine entscheidende Rolle spielt. Auf der einen Seite bestimmt das Klebeverhalten des Klebstoffs die Größe der möglichen Delaminationsfläche, und auf der anderen Seite bestimmt seine chemische Zusammensetzung das Ausgas- und Diffusionsverhalten, welche Einfluss auf den Kontaminationsgrad der delaminierten Grenzflächen haben. Mit Hilfe von dickeren Metallschichten konnte erreicht werden, dass leichter zu verarbeitende Klebstoffe (Klebestreifen) für die Delamination verborgener Grenzflächen verwendet werden können. Auch konnte die gesamte Prozedur, eine verborgene Grenzfläche zu präparieren und zu delaminieren, erfolgreich in-situ im UHV durchgeführt werden. Als schwierig zeigte sich die thermische Desorption von Molekülschichten von delaminierten Metallkontakten. Bei der thermischen Ausdünnung (100-250_C) wird unweigerlich die Morphologie des darunter liegende Metallkontakts verändert. Zudem wurden Konzepte getestet, mit welchen PTCDA-Schichten von delaminierten Kontakten mittels Lösungsmitteln entfernt wurden, um im Anschluss daran die Kontakttopographie zu untersuchen. Es wird vermutet, dass der Einfluss der Lösungsmittel auf den delaminierten Kontakt zwar gegeben, jedoch gering ist. Im zweiten Schwerpunkt dieser Arbeit konnten für verborgene Metall(Au,Ag)/PTCDA und Ag/NTCDA-Grenzflächen nach ihrer Delamination einige Gemeinsamkeiten festgestellt werden: Nach der Delamination der Top-Kontakte befinden sich auf den Metallkontakten inhomogene Molekülschichten. Dabei waren auf den PTCDA-bedeckten Kontakten dickere Schichten (4-5 ML PTCDA auf Ag-Kontakt) und auf den NTCDA-bedeckten Kontakten große Bereiche von mindestens 2 mm im Durchmesser mit Monolagen vorhanden. Auch topographisch zeigten sich Gemeinsamkeiten. So wiesen die mit Molekülmultilagen bedeckten Bereiche glatte Oberflächen auf, während die Metalloberflächen selbst zerklüftete, mäanderartige und raue Oberflächen aufwiesen. Eine weitere Gemeinsamkeit war, dass der Klebstoff die PE-spektroskopische Untersuchung der Valenzzustände erheblich erschwerte. Des Weiteren konnte die Molekülschicht zwar thermisch ausgedünnt werden, jedoch konnten danach keine Valenzzustände untersucht werden. Als letzter gemeinsamer Gesichtspunkt waren topographische Einflüsse des Klebstoffs, welcher durch seine mikro- wie makroskopischen thermischen Verformungen und Blasenbildung massiv die topographische Struktur des Kontakts verändert. Bei der Untersuchung von in-situ delaminierten verborgenen Grenzflächen stand zunächst die Metall(Au,Ag)/PTCDA-Grenzflächen im Fokus. Bei delaminierten Au/PTCDA-Kontakten war die offengelegte Grenzfläche nach der Delamination nicht intakt, und es fanden sich Löcher in der Metallschicht mit mehreren μm Durchmesser. Durch diese waren Bestandteile des Klebstoffs (VACSEAL) photoelektronenspektroskopisch und lichtmikroskopisch auf der verborgenen Grenzfläche zu sehen, die gerade in der UV-Photoelektronenspektroskopie (UPS) eine Untersuchung der Valenzzustände dünner PTCDA-Schichten besonders erschweren. Das HOMO der PTCDA-Multilage liegt bei delaminierten Au/PTCDA-Kontakten bei etwa 2,3eV. Die Untersuchung von Ag/PTCDA-Kontakten zeigte intakte Metallkontaktfilme nach der Delamination. Es konnte zudem die Molekülschicht thermisch bei 260_C auf 2-4 Monolagen erfolgreich ausgedünnt werden, so dass Valenzzustände untersucht werden konnten. Der Klebstoff erschwerte jedoch auch hier die Untersuchung. Aufgrund verbreiterter Spektren konnten die Lagen des HOMO und FLUMO des in-situ delaminierten und ausgedünnten Ag/PTCDA-Kontakts ungefähr bei 1,9 eV bzw. 0,7 eV bestimmt werden. Weiterhin wurden offengelegte Ag/NTCDA-Grenzflächen untersucht. Bei Ag/ NTCDAKontakten ist es gelungen, durch sukzessives Erhöhen der Metallschichtdicke den Einfluss des Klebstoffs zu minimieren bzw. gänzlich ohne diesen auszukommen. Bereits ab Silberschichtdicken von 2,5 μm können verborgene Grenzflächen mit geschickter Technik so delaminiert werden, dass sich Kontaktbereiche ohne Klebstoffanteile ergeben. Dabei wurde ein Drittel des Kontakts verklebt und die restlichen zwei Drittel standen nach der Delamination frei von Klebstoffbestandteilen für Untersuchungen zur Verfügung. Ein weiterer Erfolg bezüglich der Delamination war nicht nur, dass leichter zu verarbeitende Klebstoffe (Klebestreifen) verwendet werden konnten, sondern vor allem, dass es gelang, Ag/NTCDA-Kontakte zu delaminieren, deren Molekülschichtdicken im Monolagenbereich vorlagen. Damit konnte zum ersten Mal die direkte Molekül-Metall-Wechselwirkung an der verborgenen Grenzfläche untersucht werden, ohne dass der Kontakt für die Klebstoffaushärtung geheizt und die NTCDA-Schicht thermisch desorbiert werden musste. Das mit UPS ermittelte HOMO lag dabei bei 2,3 eV und das FLUMO bei 0,6 eV. Zudem wurde eine Austrittsarbeit von 4,9 eV ermittelt. Ferner konnte die Valenzstruktur eines vollständig in-situ präparierten und delaminierten Kontakts im UHV untersucht werden. Die Ergebnisse zeigten keinerlei Unterschiede zu den Kontakten, die für die Verklebung an Luft gebracht wurden. Ferner wurde ein Modell vorgestellt, mit dem erklärt werden kann, weshalb sich nach der Delamination nur einige wenige Moleküllagen auf dem Metallkontakt befinden. Bei den allgemeinen topographischen Untersuchungen ergab sich, dass die delaminierten Ag/NTCDA-Kontakte relativ rau mit einer RMS-Rauheit im Bereich von 18-24 nm und einer Skewness von 0,5 bis 1,5 waren. Ebenfalls wurden zwei Auffälligkeiten von delaminierten Ag/NTCDA-Kontakten untersucht: Die erste waren topographische Strukturen, die im Lichtmikroskop Löcher in der Metallschicht zu sein schienen. Diese erwiesen sich im Rasterkraftmikroskop (RKM) als lokal begrenzte Bereiche mit erhöhter Rauheit. Die zweite topographische Auffälligkeit waren Bereiche auf den delaminierten Ag/NTCDA-Kontakten, die im Lichtmikroskop als dunkle Flecken verschiedener Größe erschienen. Bei RKM-Untersuchungen konnten die dunklen Bereiche als NTCDA-Kristallite identifiziert werden, deren Dicke zwischen 500-600 nm lag. Zum Abschluss soll an dieser Stelle noch angemerkt werden, dass die Übertragung der Erfahrungen und Ergebnisse dieser Arbeit auf andere Systeme möglich ist. Das hier erfolgreich angewandte Delaminationskonzept besticht durch einfache Handhabung und Untersuchungsmöglichkeiten im UHV. Gerade im Hinblick auf eine vollständige in-situ Präparation und Delamination gibt es jedoch noch erhebliches Optimierungspotential, bis die Untersuchung von verborgenen Grenzflächen anderer Systeme, die besonders empfindlich gegenüber Umgebungsbedingungen sind, erfolgreich durchgeführt werden und zur Optimierung von "organischen" Bauteilen beitragen können.
This thesis deals with the synthesis of improved organic semiconductors, the detailed investigation of the molecular properties and the solid state arrangements revealed by single crystal X-ray diffraction and finally the development of structureperformance dependencies by measuring of the charge carrier mobilities of the derivatives in thin film transistors. The two main-goals of this thesis were achieved. Well soluble acene derivatives for spin-coated TFTs were obtained, showing charge carrier mobilities in the range of polymer p-type materials. Novel core-fluorinated perylene bisimide dyes were synthesized particularly and the use of electron deficient substituents lead to PBIs with outstanding air-stable mobilities in thin film transistors prepared by vacuum deposition techniques. The relationship between performance, air stability and solid state packing was elucidated in detail by single crystal X-ray diffraction analysis.
Eingebettet in ein Konzept zum Aufbau eines Hochleistungs-Feldeffekt-Transistors auf der Basis organischer Halbleiter (OFET), werden in der vorliegenden Dissertation fundamentale Aspekte des Aufbaus und der Funktion organischer Halbleiter-Bauelemente erforscht. Die Kenntnis, welche maximale Leistungsfähigkeit organische Halbleiter in OFETs prinzipiell erreichen können, ist von elementarem Interesse, sowohl um Transportmodelle zu verfeinern, als auch um Mechanismen und Optimierungsansätze zu finden, mit denen OFETs generell verbessert werden können. Es wird das Ziel verfolgt, sich der maximalen Leistungsfähigkeit eines gegebenen Materialsystems anzunähern. Aufwendige Präparationsstrategien werden für dieses Ziel bewusst in Kauf genommen, auch wenn deshalb vermutlich kein direkter Zugang zu Anwendungen eröffnet wird. An geeigneten Modellsystemen können einzelne wichtige Aspekte, wie die elektronische Struktur an Metallkontakten und im organischen Halbleitervolumen sowie das Wachstum von Schichten und Kristalliten organischer Halbleitermoleküle auf einkristallinen Isolatorsubstraten charakterisiert werden. Die Ergebnisse dieser grundlegenden Experimente fließen in den Aufbau des geplanten OFETs ein. Auf dem Weg zu einem funktionsfähigen Bauelement mit bestmöglichen Eigenschaften wurden wesentliche Fortschritte erzielt. Der erste Schwerpunkt dieser Arbeit ist die Untersuchung elektronischer Niveaus an Metallkontakt-Grenzflächen und im Volumen des Modellsystems PTCDA/Ag(111) mit Zwei-Photonen-Photoelektronenspektroskopie (2PPE). Die 2PPE-Spektren der PTCDA/Ag(111)-Grenzfläche sind dominiert durch einen unbesetzten, parallel zur Grenzfläche stark dispersiven Shockley-artigen Grenzflächenzustand (IS), der sich durch die Chemisorption der Moleküle auf der Ag(111)-Oberfläche bildet. Bei der Untersuchung von intramolekular angeregten elektronischen Zuständen von PTCDA mit 2PPE zeigen sich im Vergleich zum Untergrund der Spektren schwache Signale, die jedoch mit einer geeigneten Beschreibung des Untergrunds davon separiert werden können. Besonders interessant ist in diesem Zusammenhang das LUMO, das bei einer Anregung aus dem HOMO eine um 0,4 eV stärkere energetische Absenkung zeigt, als bei der Anregung aus dem HOMO-1. Dies kann durch die unterschiedlichen exzitonischen Zustände, die bei den Anregungen entstehen, erklärt werden. Neben den metallischen Kontakten ist die Grenzfläche zwischen organischem Halbleiter und Gate-Isolator entscheidend für die Leistungsfähigkeit eines OFETs. Am Beispiel des Wachstums von Diindenoperylen-Molekülen (DIP) auf einkristallinen Al2O3-Substraten wurde die morphologische und strukturelle Ausbildung von organischen Halbleiterschichten mit optischer Mikroskopie und Rasterkraftmikroskopie untersucht. Das Wachstum kann als stark anisotrop charakterisiert werden. Die – im Vergleich zu den Bindungsenergien mit dem Substrat – deutlich größeren Bindungsenergien innerhalb der DIP-(001)-Kristallebenen führen bei Substrattemperaturen von 440 K zu einem Wachstum von aufrecht stehenden Molekülen. Es zeigt sich, dass die während des Wachstums herrschende Substrattemperatur einen entscheidenden Einfluss auf die Morphologie der DIP-Schicht hat. So nimmt die Inselgröße von etwa 200 nm bei 350 K auf über 700 nm bei 450 K zu. Außerdem wird ein Ansteigen der Filmrauheit, besonders ab etwa 430 K, beobachtet, das auf den Übergang zu einem anderen Wachstumsmodus bei diesen Temperaturen hinweist. Bei etwas höheren Temperaturen von etwa 460 K wird das Wachstum von DIP-Kristalliten beobachtet. Dabei können – abhängig von den gewählten Präparationsparametern – drei unterschiedliche Kristallit-Typen unterschieden werden: „Mesa-Kristallite“ mit lateralen Abmessungen von mehreren Mikrometern, „Dendritische Kristallite“, die eine verzweigte Struktur aufweisen, die mithilfe der Wachstumskinetik erklärt werden kann und „Schichtkristallite“, deren Morphologie sich durch teilweise starke Krümmungen auszeichnet. Insgesamt zeigt sich, dass die Morphologie kristalliner Strukturen durch eine feine Balance der Präparationsparameter Substrattemperatur, Aufdampfrate, Substratmorphologie und Substratreinheit bestimmt wird, so dass kleine Änderungen dieser Parameter zu deutlich unterschiedlichen Kristallitformen führen. Schließlich wird das Konzept zum Aufbau eines Hochleistungs-OFET vorgestellt und in Details weiterentwickelt. Fortschritte werden in erster Linie bei der Präparation der Gate-Elektrode erzielt, die unter dem Al2O3-Substrat angebracht werden soll. Für die Ausdünnung des Substrats wird eine Bohrtechnik weiterentwickelt und mit einer nasschemischen Ätzmethode kombiniert, so dass Isolatorstärken von unter 10 µm erreicht werden können. Erste wenige OFETs wurden auf der Basis dieses Substrats präpariert, allerdings ohne dass die Bauteile Feldeffekte zeigten. Verbesserungsmöglichkeiten werden diskutiert.
In summary, it can be stated that the herein studied set of acceptor-substituted squaraine dyes can be seen as potent candidates for OTFTs. Furthermore, their transistor performance can be easily tuned to obtain hole mobilities up to 0.45 cm2/Vs from solution and 1.3 cm2/Vs from sublimation by choosing adequate deposition techniques. In the end, a probable structural model derived from studies of the thin-film morphology by methods such as optical spectroscopy, AFM and X-ray even facilitated the clarification of the observed charge transport behavior.
In this work, three different material systems comprising carbon were researched: (i) Organic polymers and small molecules, in conjunction with fullerene molecules for applications in organic photovoltaics (OPV), (ii) single walled semiconducting carbon nanotubes and (iii) silicon carbide (SiC), whose defect color centers are recently in the limelight as candidates for quantum applications. All systems were analyzed using the optically detected magnetic resonance (ODMR) spectroscopy.
In the OPV chapter, first the intrinsic parameters and orientations of high spin excitons were analyzed in the materials P3HT, PTB7 and DIP. Specifically the influence of ordering in these organic systems was adressed. The second part of the OPV chapter is concerned with triplet generation by electron back transfer in the high-efficiency OPV material combination PTB7:PC71BM.
The carbon nanotube chapter first shows the way to the first unambiguous proof of the existence of triplet excitons in semiconducting (6,5) single-walled carbon nanotubes (SWNT) by ODMR spectroscopy. A model for exciton kinetics, and also orientation and intrinsic parameters were propoesed.
The last part of this work is devoted to spin centers in silicon carbide (SiC). After a brief introduction, the spin multiplicity of the V2 and V3 silicon vacancies, and also of a Frenkel pair and an unassigned defect UD in 6H SiC, and of the V2 vacancy and the Frenkel pair in 4H SiC, was shown to be S=3/2. The spin polarized pumping of the 3/2 manifold of the quartet ground state of the silicon vacancies allows stimulated microwave emission. Furthermore, in 6H SiC, the UD and Frenkel pair were shown to have a large dependence of their intrinsic zero field interaction parameters on the temperature, while the vacancies are temperature independent. The application of the UD and Frenkel pair as temperature sensor, and of the vacancies as a vector magnetic field sensor is discussed.
In the course of this dissertation, we have presented the interest of using spectroscopic methods to unravel the physics of polymer semiconductors in photovoltaic applications. Applying photoluminescence and photoinduced absorption spectroscopy to the reference system P3HT:PCBM has enabled us to study the major steps of photocurrent generation in organic bulk heterojunctions, from excitons generation to charges extraction and loss mechanisms and thus to improve the understanding of those mechanisms.
The exciton binding energy, is the first obstacle to overcome for photocurrent generation in organic solar cell and the reason for the use of two materials, whose heterojunction act as a driving force for charge separation. We developed an original photoluminescence-detected field-induced exciton quenching method to investigate this energy. Absorption and photoluminescence spectra of pure P3HT show that, while both amorphous and crystalline domains participate in
absorption, the energy is then transferred to the crystalline domains, from where the photoluminescence is exclusively originating. The field dependence of this photoluminescence showed that an energy of no less than 420 meV is necessary to split excitons into non photon-emitting species. Comparing those results with energy levels obtained by absorption and photoelectron spectroscopies, confirmed that the formation of those species is only a first step toward dissociation into free charges. Indeed, photoemission spectroscopy and the onset
of photocurrent upon increasing the photon energy in a pure P3HT solar cell, concomitantly show that the energy level of a pair of free polarons is located 0.7 eV above the one of the exciton. The comprehensive analysis of those results originating from those different method enable us to draw a global picture of the states and energies involved in free polarons generation in pure material. This work has been widely acknowledged by the scientific community, published in Physical Review B in 2010 [1] and presented in national [2] and international [3] conferences.
The spectroscopy of excited states is used to detect the presence of wanted species (charges) and potentially unwanted neutral species upon photoexcitation. As such, it offers us the possibility to qualify the efficiency of charge generation and, if any, identify the competing processes and the generation of unwanted species. In the frame of the European Marie Curie Research Network SolarNType,[4] this possibility was used - in combination with morphological,
charge transport and devices characterizationsn - to study a number of new donor:acceptor blends. Thanks to those techniques, we were able to not only quantify the potential of those blends, but also to provide the chemist laboratories with a precious and detailed feedback on the strengths and weakness of the molecules, regarding charge generation, transport and extraction. The detailed study of terrylene-3,4:11,12-bis(dicarboximide) as electron acceptor for
solar cells application was published in the peer review journal Synthetic Metals and was chosen to illustrate the cover page of the issue [5].
Finally, in the last chapter, we have used time resolved photoinduced absorption to improve the understanding of the charge carrier loss mechanisms in P3HT:PCBM active layers. This comprehension is of prime importance because, the fact that this recombination is far weaker than expected from the Langevin theory, enable polarons to travel further without recombining and thus to build thicker and more efficient devices. A comprehensive analysis of steady-state
PIA spectra of pure P3HT, indicates that probing at 980 nm at a temperature between 140 and 250 K enables to monitor specifically polaron densities in both neat P3HT and P3HT:PCBM. Applying this finding to transient absorption enabled us to monitor, for the first time, the bimolecular recombination in pure P3HT, and to discover that - in sharp contrast with the blend - this recombination was in agreement with the Langevin theory. Moreover, it enables us to pinpoint the important role played by the existence of two materials and of energetical traps in the slow recombination and high recombination orders observed in the blend. This work has been published in the Journal of Applied Physics.[6]
Those new insights in the photophysics of polymer:fullerene photoactive layers could have a strong impact on the future developement of those materials. Consistent measurements of the binding energy of excitons and intermediate species, would enable to clarify the role played by excess thermal energy in interfacial states dissociation. Better understanding of blends
morphology and its influence on solar cells parameters and in particular on recombination could enable to reproduce the conditions of limited recombination on material systems offering some promising performances but with only limited active layer thicknesses. However, due to the number of parameters involved, further experimentation is required, before we can reach a quantitative modeling of bimolecular recombination.
[1] Deibel et al., Phys. Rev. B, 81:085202, 2010
[2] Gorenflot et al., Deutsche Physikalische Gesellschaft Frühjahrstagung 2010, CPP20:10, Regensburg, Germany, 2010
[3] Gorenflot et al., International Conference of Synthetic Metals, 7Ax:05, Kyoto, Japan, 2010
[4] Marie-Curie RTN "SolarNTyp" Contract No. MRTN-CT-2006-035533
[5] Gorenflot et al., Synth. Met., 161(23{24):2669-2676, 2012
[6] Gorenflot et al., J. Appl. Phys., 115(14):144502, 2014
The present work addressed the influence of spins on fundamental processes in organic
semiconductors. In most cases, the role of spins in the conversion of sun light
into electricity was of particular interest. However, also the reversed process, an electric
current creating luminescence, was investigated by means of spin sensitive measurements.
In this work, many material systems were probed with a variety of innovative
detection techniques based on electron paramagnetic resonance spectroscopy.
More precisely, the observable could be customized which resulted in the experimental
techniques photoluminescence detected magnetic resonance (PLDMR), electrically
detected magnetic resonance (EDMR), and electroluminescence detected magnetic
resonance (ELDMR). Besides the commonly used continuous wave EPR spectroscopy,
this selection of measurement methods yielded an access to almost all intermediate
steps occurring in organic semiconductors during the conversion of light into electricity
and vice versa. Special attention was paid to the fact that all results were applicable
to realistic working conditions of the investigated devices, i.e. room temperature application and realistic illumination conditions.
The present thesis is concerned with the impact of alkali metal-doping on the electronic structure of semiconducting organic thin films. The organic molecular systems which have been studied are the polycyclic aromatic hydrocarbons picene, pentacene, and coronene. Motivated by reports about exceptional behavior like superconductivity and electronic correlations of their alkali metal-doped compounds, high quality films fabricated from the above named molecules have been studied. The electronic structure of the pristine materials and their doped compounds has been investigated using photoelectron spectroscopy. Core level and valence band studies of undoped films yield excellent photoemission spectra agreeing with or even outperforming previously reported data from the literature. Alkali metal-doping manifests itself in a uniform manner in the electronic structure for all probed samples: Opposed to reports from the literature about metallicity and even superconductivity in alkali metal-doped picene, pentacene, and coronene, all films exhibit insulating nature with an energy gap of the order of one electron-volt. Remarkably, this is independent of the doping concentration and the type of dopant, i.e., potassium, cesium, or sodium. Based on the interplay between narrow bandwidths in organic semiconductors and sufficiently high on-molecule Coulomb repulsion, the non-metallicity is attributed to the strong influence of electronic correlations leading to the formation of a Mott insulator. In the case of picene, this is consolidated by calculations using a combination of density functional theory and dynamical mean-field theory. Beyond the extensive considerations regarding electronic correlations, further intriguing aspects have been observed. The deposition of thin picene films leads to the formation of a non-equilibrium situation between substrate and film surface. Here, the establishment of a homogeneous chemical potential is hampered due to the only weak van der Waals-interactions between the molecular layers in the films. Consequently, spectral weight is measurable above the reference chemical potential in photoemission. Furthermore, it has been found that the acceptance of additional electrons in pentacene is limited. While picene and coronene are able to host up to three extra electrons, in pentacene the limit is already reached for one electron. Finally, further extrinsic effects, coming along with alkali metal-doping, have been scrutinized. The oxidation of potassium atoms induced by the reaction with molecular oxygen in the residual gas of the ultra-high vacuum system turned out to significantly influence the electronic structure of alkali metal-doped picene and coronene. Moreover, also the applied X-ray and UV irradiation caused a certain impact on the photoemission spectra. Surprisingly, both effects did not play a role in the studies of potassium-doped pentacene.
Continuously increasing energy prices have considerably influenced the cost of living over the last decades. At the same time increasingly extreme weather conditions, drought-filled summers as well as autumns and winters with heavier rainfall and worsening storms have been reported. These are possibly the harbingers of the expected approaching global climate change. Considering the depletability of fossil energy sources and a rising distrust in nuclear power, investigations into new and innovative renewable energy sources are necessary to prepare for the coming future.
In addition to wind, hydro and biomass technologies, electricity generated by the direct conversion of incident sunlight is one of the most promising approaches. Since the syntheses and detailed studies of organic semiconducting polymers and fullerenes were intensified, a new kind of solar cell fabrication became conceivable. In addition to classical vacuum deposition techniques, organic cells were now also able to be processed from a solution, even on flexible substrates like plastic, fabric or paper.
An organic solar cell represents a complex electrical device influenced for instance by light interference for charge carrier generation. Also charge carrier recombination and transport mechanisms are important to its performance. In accordance to Coulomb interaction, this results in a specific distribution of the charge carriers and the electric field, which finally yield the measured current-voltage characteristics. Changes of certain parameters result in a complex response in the investigated device due to interactions between the physical processes. Consequently, it is necessary to find a way to generally predict the response of such a device to temperature changes for example.
In this work, a numerical, one-dimensional simulation has been developed based on the drift-diffusion equations for electrons, holes and excitons. The generation and recombination rates of the single species are defined according to a detailed balance approach. The Coulomb interaction between the single charge carriers is considered through the Poisson equation. An analytically non-solvable differential equation system is consequently set-up. With numerical approaches, valid solutions describing the macroscopic processes in organic solar cells can be found. An additional optical simulation is used to determine the spatially resolved charge carrier generation rates due to interference.
Concepts regarding organic semiconductors and solar cells are introduced in the first part of this work. All chapters are based on previous ones and logically outline the basic physics, device architectures, models of charge carrier generation and recombination as well as the mathematic and numerical approaches to obtain valid simulation results.
In the second part, the simulation is used to elaborate issues of current interest in organic solar cell research. This includes a basic understanding of how the open circuit voltage is generated and which processes limit its value. S-shaped current-voltage characteristics are explained assigning finite surface recombination velocities at metal electrodes piling-up local space charges. The power conversion efficiency is identified as a trade-off between charge carrier accumulation and charge extraction. This leads to an optimum of the power conversion efficiency at moderate to high charge carrier mobilities. Differences between recombination rates determined by different interpretations of identical experimental results are assigned to a spatially inhomogeneous recombination, relevant for almost all low mobility semiconductor devices.
Um die Natur der Transportdynamik von Ladungsträgern auch auf mikroskopischen Längenskalen nicht-invasiv untersuchen zu können, wurde im ersten Schwerpunkt dieser Arbeit das PL- (Photolumineszenz-) Quenching (engl.: to quench: löschen; hier: strahlungslose Rekombination von Exzitonen) in einer organischen Dünnschicht durch die injizierten und akkumulierten Löcher in einer Transistorgeometrie analysiert. Diese Zusammenführung zweier Methoden - der elektrischen Charakterisierung von Dünnschichttransistoren und der Photolumineszenzspektroskopie - erfasst die Änderung des strahlenden Zerfalls von Exzitonen infolge der Wechselwirkung mit Ladungsträgern. Dadurch werden räumlich aufgelöste Informationen über die Ladungsverteilung und deren Spannungsabhängigkeit im Transistorkanal zugänglich. Durch den Vergleich mit den makroskopischen elektrischen Kenngrößen wie der Schwell- oder der Turn-On-Spannung kann die Funktionsweise der Transistoren damit detaillierter beschrieben werden, als es die Kenngrößen alleine ermöglichen. Außerdem wird die Quantifizierung dieser mikroskopischen Interaktionen möglich, welche beispielsweise als Verlustkanal in organischen Photovoltaikzellen und organicshen Leuchtdioden auftreten können. Die Abgrenzung zu anderen dissipativen Prozessen, wie beispielsweise der Exziton-Exziton Annihilation, Ladungsträgerrekombination, Triplett-Übergänge oder Rekombination an Störstellen oder metallischen Grenzflächen, erlaubt die detaillierte Analyse der Wechselwirkung von optisch angeregten Zuständen mit Elektronen und Löchern.
Im zweiten Schwerpunkt dieser Arbeit werden die Transporteigenschaften des Naphthalindiimids Cl2-NDI betrachtet, bei dem der molekulare Überlapp sowie die Reorganisationsenergie in derselben Größenordnung von etwa 0,1 eV liegen. Um experimentell auf den mikroskopischen Transport zu schließen, werden nach der Optimierung des Kristallwachstums Einkristalltransistoren hergestellt, mit Hilfe derer die Beweglichkeit entlang verschiedener kristallographischer Richtungen als Funktion der Temperatur gemessen werden kann. Die einkristalline Natur der Proben und die spezielle Transistorgeometrie ermöglichen die Analyse der räumlichen Anisotropie des Stromflusses. Der gemessene Beweglichkeitstensor wird daraufhin mit simulierten Tensoren auf der Basis von Levich-Jortner Raten verglichen, um auf den zentralen Ladungstransfermechanismus zu schließen.
In this work, the trap states in the conjugated polymer P3HT, often used as electron donor in organic bulk heterojunction solar cells, three commonly used fullerene based electron acceptors and P3HT:PC61BM blends were investigated. Furthermore, the trap states in the blend were compared with these of the pure materials. Concerning the lifetime of organic solar cells the influence of oxygen on P3HT and P3HT:PC61BM blends was studied. The experimental techniques used to investigate the trap states in the organic semiconductors were (fractional) thermally stimulated current (TSC) and current based deep level transient spectroscopy (Q-DLTS). Fractional TSC measurements on P3HT diodes revealed a quasi-continuous trap distribution. The distribution suggested two different traps in P3HT with approximately Gaussian energy distributions and maxima at about 50 meV and 105 meV. Thereby, the former was attributed to the tail states within the regular Gaussian density of states due to the low activation energy. The latter, deeper traps, however, exhibited a strong dependence on oxygen. Exposure of the P3HT diodes to oxygen, ambient air and synthetic (dry) air all revealed an increase of the deeper traps density with exposure time in the same manner. While the lower limit of the trap density in non aged P3HT samples was in the range of (1.0 − 1.2)×10^22 m^−3, it was more than doubled after an exposure of 50 h to air. An increase of the trap density with oxygen exposure time was also seen in the Q-DLTS measurements accompanied with an increase of the temperature dependence of the emission rates, indicating an enhanced formation of deeper traps. Due to the raise in density of the deeper traps, the charge carrier mobility in P3HT significantly decreased, as revealed by photo-CELIV measurements, resulting in a loss in mobility of about two orders of magnitude after 100 h exposure to synthetic air. The increased trap density was attributed to p-doping of P3HT by the transfer of an electron to adsorbed oxygen. This effect was partially reversible by applying vacuum to the sample for several hours or, more significantly, by a thermal treatment of the devices in nitrogen atmosphere. The trap states in the methanofullerenes PC61BM, bisPC61BM and PC71BM were investigated by TSC measurements. PC61BM yielded a broad quasi-continuous trap distribution with the maximum of the distribution at about 75 meV. The comparison of the TSC spectra of the three methanofullerenes exhibited significant differences in the trap states with higher activation energies of the most prominent traps in bisPC61BM and PC71BM compared to PC61BM. This probably originates from the different isomers bisPC61BM and PC71BM consist of. Each of the isomers yields different LUMO energies, where the lower ones can act as traps. The lower limit of the trap density of all of the three investigated fullerene derivatives exhibited values in the order of 10^22 m^−3, with the highest for bisPC61BM and the lowest for PC61BM. By applying fractional TSC measurements on P3HT:PC61BM solar cells, it was shown that the trap distribution in the blend is a superposition of the traps in pure P3HT and PC61BM and additional deeper traps in the range of about 250 meV to 400 meV. The origin of these additional traps, which can not be related to the pure materials, was attributed to a higher disorder in the blend and P3HT/PC61BM interfaces. This conclusion was supported by standard TSC and Q-DLTS measurements performed on pristine and annealed P3HT:PC61BM blends, exhibiting a higher ratio of the deep traps in the pristine samples. The lower limit of the trap density of the investigated annealed solar cells was in the range of (6−8)×10^22 m^−3, which was considerably higher than in the pure materials. The influence of oxygen on P3HT:PC61BM solar cells was investigated by exposure of the devices to synthetic air under specific conditions. Exposure of the solar cells to oxygen in the dark resulted in a strong decrease in the power conversion efficiency of 60 % within 120 h, which was only caused by a loss in short-circuit current. Simultaneous illumination of the solar cells during oxygen exposure strongly accelerated the degradation, resulting in an efficiency loss of 30 % within only 3 h. Thereby, short-circuit current, open-circuit voltage and fill factor all decreased in the same manner. TSC measurements revealed an increase of the density of deeper traps for both degradation conditions, which resulted in a decrease of the mobility, as investigated by CELIV measurements. However, these effects were less pronounced than in pure P3HT. Furthermore, an increase of the equilibrium charge carrier density with degradation time was observed, which was attributed to oxygen doping of P3HT. With the aid of macroscopic simulations, it was shown that the doping of the solar cells is the origin of the loss in short-circuit current for both degradation conditions.
This thesis focused on the influence of the underlying crystal structure and hence, of the mutual molecular orientation, on the excited states in ordered molecular aggregates. For this purpose, two model systems have been investigated. In the prototypical donor-acceptor complex pentacene-perfluoropentacene (PEN-PFP) the optical accessibility of the charge transfer state and the possibility to fabricate highly defined interfaces by means of single crystal templates enabled a deep understanding of the spatial anisotropy of the charge transfer state formation. Transferring the obtained insights to the design of prototypical donor-acceptor devices, the importance of interface control to minimize the occurrence of charge transfer traps and thereby, to improve the device performance, could be demonstrated. The use of zinc phthalocyanine (ZnPc) allowed for the examination of the influence of molecular packing on the excited electronic states without a change in molecular species by virtue of its inherent polymorphism. Combining structural investigations, optical absorption and emission spectroscopy, as well as Franck-Condon modeling of emission spectra revealed the nature of the optical excited state emission in relation to the structural \(\alpha \) and \(\beta \) phase over a wide temperature range from 4 K to 300 K. As a results, the phase transition kinetics of the first order \(\alpha \rightarrow \beta\) phase transition were characterized in depth and applied to the fabrication of prototypical dual luminescent OLEDs.
The focus of this work is studying recombination mechanisms occurring in organic solar cells, as well as their impact on one of their most important parameters — the open circuit voltage Voc.
Firstly, the relationship between Voc and the respective charge carrier density n in the active layer under open circuit conditions is analyzed. Therefor, a model after Shockley for the open circuit voltage is used, whose validity is proven with the aid of fits to the measured data. Thereby, it is emphasized that the equation is only valid under special conditions. In the used reference system P3HT:PC61BM the fits are in agreement with the measurement data only in the range of high temperatures (150 - 300 K), where Voc increases linearly with decreasing temperature. At lower temperatures (50 – 150 K), the experiment shows a saturation of Voc. This saturation cannot be explained with the model by the measured falling charge carrier density with decreasing temperatures. In this temperature range Voc is not directly related to the intrinsic properties of the active layer. Voc saturation is due to injection energy barriers at the contacts, which is ascertained by macroscopic simulations. Furthermore, it is observed that Voc in the case of saturation is equivalent to the so-called built-in potential. The difference between the built-in potential and the energy gap corresponds thereby to the sum of the energy barriers at both contacts.
With the knowledge of the Voc(n) dependency for not contact limited solar cells, it is possible to investigate the recombination mechanisms of charge carriers in the active layer. For Langevin recombination the recombination rate is Rn2 (recombination order RO = 2), for Shockley-Read-Hall (SRH) Rn1 (RO=1); in various publications RO higher than two is reported with two main explanations.
1: Trap states for charge carriers exist in the respective separated phases, i.e. electrons in the acceptor phase and holes in the donor phase, which leads to a delayed recombination of the charge carriers at the interface of both phases and finally to an apparent recombination order higher than 2.
2: The enhanced R(n) dependency is attributed to the so called recombination prefactor, which again is dependent from n dependent mobility µ.
It is shown that for the system P3HT:PC61BM at room temperature the µ(n) dependency does nearly completely explain the higher RO but not at lower temperatures which in this case supports the first explanation. In the material system PTB7:PC71BM the increased RO cannot be explained by the µ(n) dependency even at room temperature.
To support the importance of trap states in combination with a phase separation for the explanation of the enhanced RO, additional trap states were incorporated in the solar cells to investigate their influence on the recombination mechanisms. To achieve this, P3HT:PC61BM solar cells were exposed to synthetic air (in the dark and under illumination) or TCNQ was added in small concentrations to the active layer which act as electron traps. For the oxygen degraded solar cell the recombination order is determined by a combination of open Voc-transients and Voc(n) measurements. Thereby, a continuous increase of the recombination order from 2.4 to more than 5 is observed with higher degradation times. By the evaluation of the ideality factor it can be shown that the impact of SRH recombination is increasing with higher trap concentration in relation to Langevin recombination. A similar picture is revealed for solar cells with TCNQ as extrinsic trap states.
Finally, a phenomenon called s-shaped IV-curves is investigated, which can sometimes occur for solar cells under illumination. As course of this a reduced surface recombination velocity can be found. Experimentally, the solar cells were fabricated using a special plasma treatment of the ITO contact. The measured IV-curves of such solar cells are reproduced by macroscopic simulations, where the surface recombination velocity is reduced. Hereby, it has to be distinguished between the surface recombination of majority and minority charge carriers at the respective contacts. The theory can be experimentally confirmed by illumination level dependent IV-curves as well as short circuit current density and open circuit voltage transients.
Exziton-Polaritonen sind hybride Quasiteilchen, die entstehen durch die starke Kopplung zwischen Halbleiter-Exzitonen und Mikrokavitätsphotonen in einem optischen Resonator. Aufgrund ihres bosonischen Charakters können die Polaritonen Kondensate ausbilden. In dieser Arbeit ist der emittierende organische Halbleiter das fluoreszierende Protein mCherry. Um einen räumlichen Einschluss zu generieren wurden hemisphärische Potentiale genutzt. Durch die Variation der Potentiallandschaft (Linse, Molekül, Kette, Su-Schrieffer-Heeger-Kette und Honigwaben-Gitter) konnten Eigenschaften wie beispielsweise topologisch nicht-triviale Defekte experimentell bei Umgebungstemperatur demonstriert werden. Zusammengefasst beschäftigt sich diese Arbeit mit der Exziton-Polartion Kondensation in unterschiedlichen Potentiallandschaften mit dem organischen Halbleiter mCherry.
The transport of optically excited states, called excitons, as well as their conversion into charges define the two major steps allowing for the operation of organic photovoltaic (OPV) devices. Hence, a deep understanding of these processes, the involved mechanisms as well as possible loss channels is crucial for further improving the efficiency of organic solar cells. For studying the aforementioned processes spectroscopic methods like absorption and emission measurements are useful tools. As many of the processes take place on a sub-nanosecond (ns) timescale ultrafast spectroscopic methods are required. Due to this reason two experiments based on a femtosecond laser system were built and employed in this work, namely picosecond (ps) time-resolved photoluminescence (PL) and transient absorption (TA) spectroscopy.
By analyzing the PL decay dynamics in the prototypical organic semiconductor rubrene, the feasibility of a new approach for improving the efficiency of organic solar cells by harvesting triplet excitons generated by singlet fission was examined. Singlet fission describes a process where two triplet excitons are generated via a photoexcited singlet exciton precursor state if the energy of the two triplets is comparable with the energy of the singlet. For this purpose the influence of characteristic length scales on the exciton dynamics in different rubrene morphologies exhibiting an increasing degree of confinement was analyzed. The results show that the quenching at interfacial states efficiently suppresses the desired fission process if these states are reached by excitons during migration. Since interfacial states are expected to play a significant role in thin film solar cells and are easily accessible for the migrating excitons, the results have to be considered for triplet-based OPV.
While the aforementioned approach is only investigated for model systems so far, the efficiency of disordered organic bulk heterojunction (BHJ) solar cells could be significantly enhanced in the last couple of years by employing new and more complex copolymer donor materials. However, little is known about the photophysics and in particular the excitation dynamics of these systems. By carrying out a systematic optical study on the prominent copolymer PCDTBT and its building blocks we were able to identify the nature of the two characteristic absorption bands and the coupling mechanism between these levels. The latter mechanism is based on an intrachain partial charge transfer between two functional subunits and our time-resolved measurements indicate that this coupling governs the photophysical properties of solar cells based on these copolymers. The efficient coupling of functional subunits can be seen as a key aspect that guarantees for the success of the copolymer approach.
Another important issue concerns the optimization of the morphology of BHJ solar cells. It arises from the discrepancy between the exciton diffusion length \mbox{($\approx$ 10 nm)} and the absorption length of solar irradiation ($\approx$ 100 nm). Due to this reason, even for devices based on new copolymer materials, processing parameters affecting the morphology like annealing or employing processing additives are of major importance. In our combined optical, electrical and morphological study for solar cells based on the high-efficient copolymer PBDTTT-C we find a direct correlation between additive content and intermixing of the active layer. The observed maximum in device efficiency can be attributed to a morphology guaranteeing for an optimized balance between charge generation and transport. Our results highlight the importance of understanding the influence of processing parameters on the morphology of the BHJ and thus on the efficiency of the device.
Im Rahmen dieser Arbeit wurde gezeigt, dass die elektronischen Eigenschaften und das Packungsverhalten von Naphthalindiimid (NDI)- und Diketopyrrolopyrrol (DPP)- Derivaten durch Einführen geeigneter Substituenten sowie durch Erweiterung des konjugierten Pi-Systems zur Optimierung der Eigenschaften als organische Halbleitermaterialien eingestellt werden können. Während DPP-Halbleiter zwar in Polymeren, nicht jedoch als niedermolekulare Halbleiter, für die organische Elektronik von Bedeutung sind, stellen vor allem die hier vorgestellten cyanierten DPP-Derivate eine synthetisch leicht zugängliche Klasse an niedermolekularen p-Halbleitern mit exzellenten Lochtransporteigenschaften dar. Die Expansion des NDI- und DPP-Kerns eröffnet zudem den synthetischen Zugang zu neuen Verbindungsklassen mit veränderten elektronischen Eigenschaften. Gerade das für die Carbazolocarbazoldiimide postulierte Konzept einer elektronenreichen p-Transportachse konnte durch Wahl geeigneter Imidsubstituenten zur Entwicklung zweidimensionaler p-Halbleiter mit sehr guten Mobilitäten führen. Schließlich stellen 2,6-kernhalogenierte NDI-Derivate mit fluorierten Imidgruppen aufgrund der herausragenden Elektronenmobilitäten und der sehr hohen Luftstabilität außergewöhnliche Kandidaten für den Einsatz als n-Halbleiter in organischen Dünnschichttransistoren dar.
In the presented thesis, the various excited states encountered in conjugated organic semiconductors are investigated with respect to their utilization in organic thin-film solar cells. Most of these states are spin-baring and can therefore be addressed by means of magnetic resonance spectroscopy. The primary singlet excitation (spin 0), as well as positive and negative polaronic charge carriers (spin 1/2) are discussed. Additionally, triplet excitons (spin 1) and charge transfer complexes are examined, focussing on their differing spin-spin interaction strength. For the investigation of these spin-baring states especially methods of electron paramagnetic resonance (EPR) are best suited. Therefore according experimental methods were implemented in the course of this work to study conjugated polymers, fullerenes and their blends with continuous wave as well as time-resolved EPR and optically detected magnetic resonance.
Einfluss metallischer Nanostrukturen auf die optoelektronischen Eigenschaften organischer Halbleiter
(2018)
Opto-elektronische Bauelemente auf Basis organischer Moleküle haben in den letzten Jahren nicht nur in Nischenbereichen, wie der Kombination organischer Photovoltaik mit gebäudeintegrierten Konzepten, sondern vor allem auch in der Entwicklung von kommerziell verfügbaren OLED (organische lichtemittierende Dioden) Bauteilen, wie 4K TV-Geräten und Handy Displays, an Bedeutung gewonnen. Im Vergleich zu anorganischen Bauteilen weisen jedoch vor allem organische Solarzellen noch weitaus geringere Effizienzen auf, weswegen die Erforschung ihrer Funktionsweise und der Einflüsse der einzelnen Bestandteile auf mikroskopischer Ebene für die Weiterentwicklung und Verbesserung des Leistungspotentials dieser Technologie unabdingbar ist. \\
Um dies zu erreichen, wurde in dieser Arbeit die Wechselwirkung zwischen der lokalisierten Oberflächenplasmonenresonanz (LSPR) metallischer Nanopartikel mit den optischen Anregungen organischer Dünnschichten in dafür eigens präparierten opto-elektronischen Hybrid-Bauteilen aus kleinen Molekülen untersucht. Durch die Implementierung und Kopplung an solche plasmonischen Nanostrukturen kann die Absorption bzw. Emission durch das lokal um die Strukturen erhöhte elektrische Feld gezielt beeinflusst werden. Hierbei ist der spektrale Überlapp zwischen LSPR und den Absorptions- bzw. E\-missions\-spek\-tren der organischen Emitter entscheidend. In dieser Arbeit wurden durch Ausnutzen dieses Mechanismus sowohl die Absorption in organischen photovoltaischen Zellen erhöht, als auch eine verstärkte Emission in nanostrukturierten OLEDs erzeugt. \\
Besonderer Fokus wurde bei diesen Untersuchungen auf mikroskopische Effekte durch neu entstehende Grenzflächen und die sich verändernden Morphologien der aktiven organischen Schichten gelegt, da deren Einflüsse bei optischen Untersuchungen oftmals nur unzureichend berücksichtigt werden. In der Arbeit wurden daher die nicht zu vernachlässigenden Folgen der Einbringung von metallischen Nanostrukturen auf die Morphologie und Grenzflächen zusammen mit den spektralen Veränderungen der Absorptions- und Emissionscharakteristik organischer Moleküle analysiert und in Zusammenhang gebracht, wodurch eine Verbesserung der Effizienzen opto-elektronischer Bauteile erreicht werden soll.
The thesis investigates the electrical transport properties of different π-conjugated organic semiconductors applied as active semiconducting material in organic field-effect transistor (OFET) devices. Theses organic materials are αω-dihexylquaterthiophene (DH4T), the tetrathiafulvalene (TTF) derivatives dibenzene-tetrathiafulvalene (DB-TTF) and dithiophene-tetrathiafulvalene (DT-TTF), and polytriarylamine (PTAA). The latter material is an amorphous polymer, the three others are small molecule oligomer materials. Different deposition methods were applied and compared. The investigations in the thesis treat the pure characterisation of the above materials with their different properties in OFET devices. Furthermore, the aim was to observe and analyse general rules and effects in OFETs depending on the structure, previous history, and the device scaling. Therefore, different tools and special analysing methods were developed and applied. These are a standard characterisation method for the classification of the used organic semiconductor, temperature dependent electrical characterisation investigating the electrical transport properties, the newly developed in situ measurement method of OFET devices, the downscaling of the OFET devices of channel length below 100 nm, and the lithographical structuring of a PTAA film.
The approach of using the combination of Ultraviolet (UPS) and Inverse Photoemission (IPS) to determine the transport levels in thin films of organic semiconductors is the scope of this work. For this matter all influences on the peak position and width in Photoelectron Spectroscopy are discussed with a special focus on organic semiconductors. Many of these influences are shown with experimental results of the investigation of diindenoperylene on Ag(111). These findings are applied to inorganic semiconductors silicon in order to establish the use of UPS and IPS on a well-understood system. Finally, the method is used to determine the transport level of several organic semiconductors (PTCDA, Alq3, CuPc, DIP, PBI-H4) and the corresponding exciton binding energies are calculated by comparison to optical absorption data.
This work presents excited state investigations on several systems with respect to experimental
spectroscopic work. The majority of projects covers the temporal evolution of
excitations in thin films of organic semiconductor materials. In the first chapters, thinfilm
and interface systems are build from diindeno[1,2,3-cd:1’,2’,3’-lm]perylene (DIP)
and N,N’-bis-(2-ethylhexyl)-dicyanoperylene-3,4:9,10-bis(dicarboximide) (PDIR-CN2)
layers, in the third chapter bulk systems consist of 4,4’,4”-tris[(3-methylphenyl)phenylamino]
triphenylamine (m-MTDATA), 4,7-diphenyl-1,10-phenanthroline (BPhen) and
tris-(2,4,6-trimethyl-3-(pyridin-3-yl)phenyl)borane (3TPYMB). These were investigated
by aggregate-based calculations. Careful selection of methods and incorporation
of geometrical relaxation and environmental effects allows for a precise energetical assignment
of excitations. The biggest issue was a proper description of charge-transfer
excitations, which was resolved by the application of ionization potential tuning on
aggregates. Subsequent characterization of excitations and their interplay condenses
the picture. Therefore, we could assign important features of the experimental spectroscopic
data and explain differences between systems.
The last chapter in this work covers the analysis of single molecule spectroscopy on
methylbismut. This poses different challenges for computations, such as multi-reference
character of low-lying excitations and an intrinsic need for a relativistic description.
We resolved this by combining complete active space self-consistent field based methods
with scalarrelativistic density-functional theory. Thus we were able to confidently
assign the spectroscopic features and explain underlying processes.