Refine
Has Fulltext
- yes (5)
Is part of the Bibliography
- yes (5)
Document Type
- Doctoral Thesis (5)
Keywords
- Wirkstoff (5) (remove)
Institute
- Institut für Pharmazie und Lebensmittelchemie (5) (remove)
Upon approval of a drug, the stability of the API and the FPP has to be studied intensively because it determines the shelf-life. If a drug is found to be stable, the expiry date is arbitrary set to five years at the maximum, if a drug tends to undergo degradation, the expiry date is set shorter. The drug product must comply with predefined specifications in accordance with the ICH guidelines Q6A and Q6B during its entire market life. The content of the active substance is required to be within a specification of 95–105% of its labeled claim until expiry corresponding to the ICH guideline Q1A(R2). However, there is little or scattered literature information addressing the stability of drug products beyond their expiry dates. The objective of this thesis was to study and assess the long-term stability of a collection involving numerous pure drug substances and ampoules manufactured in the 20th century. The content and the impurity profile were examined by means of appropriate analytical methods, mainly using liquid chromatography. The results were compared to data being available in the literature. Assessing the stability regarding the dosage form and the affiliation of the drug class was conducted.
The experimental studies comprise the examination of 50 drug substances manufactured 20–30 years ago and 14 long expired ampoules which were older than 40 years in the time of analysis, exceeding many times the maximum shelf life of five years.
For investigation of the solid drug substances, pharmacopoeial methods were applied as far as possible. Indeed, results of the study showed that 44 tested substances still complied with the specification of the Ph. Eur. with regard to the content and impurity profile, even after more than two decades of storage.
For analysis of the injection solutions, HPLC-UV and HPLC-ESI/MS techniques were applied, commonly based on liquid chromatography methods of the Ph. Eur. for determination of related substances. Each method was further validated for its application to ensure accurate API quantification corresponding to ICH Q2(R1). Quite a few ampoules were identified to show surprisingly high stability. In spite of their age of 53–72 years, APIs such as caffeine, etilefrine, synephrine, metamizole sodium, furosemide, and sodium salicylate complied with the specified content that is valid nowadays, respectively. Nevertheless, typical degradation reaction, e.g. hydrolysis, oxidation, or isomerization, was observed in all remaining ampoules. Various degrees of hydrolysis were revealed for scopolamine, procaine, and adenosine triphosphate, the contents were decreased to 71%, 70%, and 15% of the declared concentrations, respectively. In the epinephrine and dipyridamole ampoules, oxidative degradation has been occurred, finding respective API contents of more or less 70%. For dihydroergotamine, excessive decomposition by epimerization was observed, resulting in an API content of 21% and degradation by isomerization was found in lobeline, still containing 64% of the labeled claim.
In conclusion, supported by the data of the present studies and the literature, defining and authorizing a longer shelf-life may be applicable to numerous pharmaceuticals which should be considered by pharmaceutical manufacturers and regulatory authorities, if justified based on stability studies. A general extension of the shelf-lives of drug products and the abolishment or extension of the maximum shelf-life limit of five years would prevent disposing of still potent medications and save a lot of money to the entire health care system.
Ionische Flüssigkeiten (engl. Ionic Liquids = IL) sind organische Salze mit einem Schmelzpunkt von unter 100 °C und bieten einen interessanten Ansatz um die orale Bioverfügbarkeit von schlecht wasserlöslichen Arzneistoffen zu verbessern.
Aufgrund seiner schlechten Wasserlöslichkeit wurde aus dem Wirkstoff BGG492 der Novartis AG eine Ionische Flüssigkeit (IL) mit dem sterisch anspruchsvollen Gegenion Tetrabutylphosphonium hergestellt. Die IL ist ein amorpher, glasartiger Feststoff mit einem Schmelzpunkt von 57 °C. Die freie Säure (FS), das Kaliumsalz (BGG-K+) und die IL (siehe Abb. 69) wurden in festem Zustand mittels polarisationsmikroskopischen Aufnahmen, Röntgen-Pulverdiffraktometrie, Röntgenkristallstrukturanalysen, Infrarot-Spektroskopie und Festkörper-NMR-Spektroskopie untersucht.
Der ionische Charakter der IL in festem Zustand konnte mittels Bandenverschiebung der deprotonierten Sulfonamidgruppe im IR-Spektrum bestätigt werden. In der Röntgenkristallstrukturanalyse konnte gezeigt werden, dass sich die Moleküle der FS in Schichten anordneten, in denen jedes Molekül mit vier Nachbarmolekülen über Wasserstoffbrücken verbunden war. Das BGG-K+ kristallisierte als Monohydrat. In dieser Kristallstruktur bildeten die Kaliumkationen in der bc-Ebene mit den BGG-Anionen ober- und unterhalb Schichten. Im Gegensatz zu der FS waren keine intermolekularen Wasserstoffbrücken zu beobachten. Die 15N-Festkörper-NMR-Spektren des BGG-K+ und der IL zeigten die gleiche chemische Verschiebung für den unsubstituierten Stickstoffes N-1‘ der Pyrazolgruppe und belegten somit ebenfalls die ionische Struktur der IL im festen Zustand. Die amorphe Struktur der IL wurde mittels Röntgen-Pulverdiffraktometrie und Polarisationsmikroskop bestätigt und eine flüssigkristalline Phase konnte ausgeschlossen werden.
Die IL zeigte im Vergleich zu der FS eine 700-fach schnellere Auflösungsrate J und eine signifikante Verlängerung der Dauer der Übersättigung in wässriger Lösung. Der sprunghafte Anstieg der Kon-zentration in Lösung („spring“) und die Dauer der Übersättigung („parachute“) wurden mittels photometrischen und potentiometrischen Titrationen untersucht. Mit Hilfe der NMR-Spektroskopie konnte der Mechanismus der Übersättigung aufgeklärt werden. Das sterisch anspruchsvolle Gegenion Tetrabutylphosphonium verhinderte die Protonierung der deprotonierten Sulfonamidgruppe von BGG. In Lösung kam es zur Bildung von Aggregaten („Cluster“), in die sich das Gegenion teilweise einlagerte. Nach der Protonierung und der Bildung von Kristallisationskeimen präzipitierte die ungeladenen FS und der metastabile Zustand der Übersättigung („parachute“) brach zusammen.
Um den Einfluss der Struktur des Gegenions auf die Auflösungsrate und die Dauer der Übersättigung zu untersuchen, wurden ca. 40 Phosphonium- und Ammonium-Kationen synthetisiert. Die Schmelzpunkte der Phosphonium- und Ammonium-Salze wurden mittels dynamischer Differenzkalorimetrie (DSC) ermittelt. Für das Phosphonium-Salz P3332OH-Bromid konnte eine enantiotrope Umwandlung der Modifikationen mittels temperaturabhängiger XRPD-Messungen bestätigt werden. Die Zelltoxizitäts-Untersuchungen der Phosphonium- und Ammonium-Salze an humanen Leberzellen (HepG2), Nierenzellen (HEK 293T) und murinen Makro-phagenzellen (J774.1) zeigten, dass mit höherer Lipophilie die Zelltoxizität zunahm. Polare Kationen zeigten keine Zytotoxizität (IC50 > 1000 µM). Die Zelltoxizität der Ammonium-Salze war im direkten Vergleich mit den Phosphonium-Salzen etwas geringer.
Die synthetisierten Phosphonium- und Ammonium-Salze, die als Chloride-, Bromide- und Iodide vorlagen, wurden durch Anionenaustausch in Hydroxide umgewandelt. Die Ionischen Flüssigkeiten wurden in einer Säure-Base-Reaktion mit der freien Säure des BGG-Moleküls und den Hydroxiden hergestellt. Der ionische Charakter konnte mittels Bandenverschiebung der deprotonierten Sulfonamidgruppe im IR-Spektrum bestätigt werden.
Die Substanzen waren amorph (XRPD) und die Glasübergangstemperaturen (DSC) bewegten sich für die Mono-Kationen im Bereich zwischen 40 °C – 97 °C, für Dikationen 81 °C - 124 °C und für Trikationen 124 °C - 148 °C. Damit erfüllten einige Substanzen die Definition einer Ionischen Flüssigkeit nicht (Smp. < 100 °C) und wurden daher als Niedrig-Gitter-Enthalpie-Salze (low lattice enthalpy salt = LLES) bezeichnet. Die ILs und LLES zeigten signifikante Unterschiede in der Auflösungsrate J, der Übersättigungszeit und der Wasserdampfsorption.
In dieser Arbeit konnte gezeigt werden, dass allein durch die Auswahl des Gegenions wichtige Parameter für die orale Bioverfügbarkeit gesteuert werden können. Durch diesen Ansatz war es möglich, aus dem sehr schlecht wasserlöslichen Arzneistoff BGG492 Ionische Flüssigkeiten bzw. LLES herzustellen, die sich drastisch schneller auflösten und teilweise über mehrere Stunden übersättigte Lösungen bildeten. Insgesamt zeigte sich, dass durch eine Zunahme der Polarität des Gegenions eine größere Auflösungsrate J und eine geringere Zelltoxizität erzielt werden konnten. Jedoch verringerte sich dadurch die Dauer der Übersättigung in Lösung und erhöhte die Hygroskopizität der ILs und LLES.
Whereas most currently used antibiotics act by interfering with essential bacterial processes, a smaller group of antibacterials disturbs the integrity of the cell membrane. Since fatty acids are a vital component of membrane phospholipids, the type-II fatty acid biosynthesis pathway (FAS-II) of bacteria constitutes a promising drug target. The front-line anti-tuberculosis prodrug isoniazid blocks the FAS-II pathway in M. tuberculosis thereby leading to morphological changes and finally to cell lysis. When it became evident that the enoyl-ACP reductase in the FAS-II pathway is the target of the activated isoniazid, several programs were initiated to develop novel inhibitors directed against this protein in different pathogens. The S. aureus enoyl-ACP reductase (saFabI) is of particular interest since three promising drug candidates inhibiting this homologue have reached clinical trials. However, despite these prospects, no crystal structures of saFabI were publicly available at the time the present work was initiated. Thus, one major goal of this thesis was the generation of high-resolution atomic models by means of X-ray crystallography. The development of a highly reproducible approach to co-crystallize saFabI in complex with NADP+ and diphenyl ether-based inhibitors led to crystal structures of 17 different ternary complexes. Additional crystallographic experiments permitted the view into two apo-structures and two atomic models of saFabI in complex with NADPH and 2-pyridone inhibitors. Based on the established saFabI structure, molecular dynamics (MD) simulations were performed to improve our understanding of the conformational mobility of this protein. Taken together, these investigations of the saFabI structure and its flexibility served as an ideal platform to address important questions surrounding substrate and inhibitor recognition by this enzyme. Intriguingly, our saFabI structures provide several vastly different snapshots along the reaction coordinate of ligand binding and hydride transfer, including the closure of the flexible substrate binding loop (SBL). The extraordinary mobility of saFabI was confirmed by MD simulations suggesting that conformational motions indeed play a pivotal role during substrate delivery and turnover. A water chain linking the active site with a water-basin inside the homo-tetrameric enzyme was found likely to be crucial for the closure and opening of the SBL and, thus, for the catalyzed reaction. Notably, the induced-fit ligand binding process involves a dimer-tetramer transition, which could be related to the observed positive cooperativity of cofactor and substrate binding. Overall, saFabI displays several unique characteristics compared to FabI proteins from other organisms that might be necessary for the synthesis of branched-chain fatty acids, which in turn are required for S. aureus fitness in vivo. This finding may explain why S. aureus is sensitive to FAS-II inhibitors even in the presence of exogenous fatty acids. Accordingly, saFabI remains a valid drug target and our structures can be used as a molecular basis for rational drug design efforts. In fact, binding affinity trends of diphenyl ether inhibitors and, more importantly, the correlated residence times could be rationalized at the molecular level. Furthermore, the structure of saFabI in complex with the 2-pyridone inhibitor CG400549 revealed unique interactions in the wider binding crevice of saFabI compared to other FabI homologues explaining the narrow activity spectrum of this clinical candidate with proven human efficacy. In summary, these studies provide an ideal platform for the development of new, effective saFabI inhibitors as exemplified by the promising 4-pyridone PT166. In the context of this dissertation, crystal structures of the condensing enzyme KasA in complex with several analogs of the naturally occurring inhibitor thiolactomycin have been solved.
Aus pharmakokinetischer Sicht sind neben Parametern wie der oralen Bioverfügbarkeit und der systemischen Clearance, für die Effektivität und Sicherheit eines inhalativ angewendeten Wirkstoffes unter anderem das Ausmaß der pulmonalen Deposition und seine pulmonale Umverteilungskinetik entscheidend. Wird eine topische Wirkung des Arzneistoffes angestrebt, so trägt eine lange Verweilzeit des Arzneistoffes im Zielgewebe, verbunden mit einer langsamen Umverteilung in den systemischen Kreislauf zu einer Wirkungsoptimierung mit gleichzeitiger Minimierung systemischer Nebenwirkungen bei. In-vitro- und ex-vivo-Modelle eignen sich hervorragend zur isolierten Untersuchung solcher pharmakokinetischer Vorgänge ohne den Einfluss verschiedener in-vivo-Faktoren, wie der Verteilung in andere Gewebe, Metabolisierungs- oder Eliminationsprozessen. Das Ziel der vorliegenden Arbeit war es daher, Modelle der humanen Lunge zu etablieren bzw. weiterzuentwickeln, die möglichst realitätsnah die Untersuchung der Pharmakokinetik pulmonal applizierter Wirkstoffe ermöglichen.
Zur Bestimmung von geringen Wirkstoffkonzentrationen in biologischen, speziell human-biologischen Matrizes wie Blut, Urin oder Mikrodialysat bedarf es einer Analysentechnik, die den Wirkstoff mit einem Höchstmaß an Selektivität, Spezifität und Präzision bestimmen kann. Daneben muß die verwendetete Methode eine hohe Geschwindigkeit aufweisen und sehr robust sein, da bei der heutigen marktwirtschaftlichen Lage Analysensysteme eine optimale Auslastung erfahren müssen. Aus diesem Grund ist der Umbau oder die Umstellung der Methode von einem zum anderen Wirkstoff ohne nennenswerten Zeitverlust ein maßgeblicher Faktor. Als Technik, die diese Anforderungen optimal erfüllt, hat sich in den letzten Jahren die LC-MS/MS-Technik etabliert. Sie ist den bislang überwiegenden Methoden, wie GC-MS-Techniken oder HPLC-UV-Detektion bzw. Fluoreszenztechniken in Bezug auf die oben genannten Parameter deutlich überlegen. In der vorliegenden Arbeit wurden für die Wirkstoffe Cisaprid, SC-72393, Haloperidol, Linezolid, Methotrexat und Ketoprofen LC-MS/MS-Methoden entwickelt oder via unabhängiger Laborvalidierung auf die lokalen Gegebenheiten transferiert und zur Bestimmung pharmakokinetischer Parameter zur Anwendung gebracht. Ziel der Methodenentwicklung war es die hohe Selektivität und Empfindlichkeit des Detektors zu nutzten, um bei geringen Probenvolumina eine Bestimmungsgrenze zu erreichen, die es ermöglichte ausreichend viele Meßwerte zu bestimmen, um die pharmakokinetischen Parameter der Wirkstoffe zu berechnen. Zusätzlich wurde eine Maximierung des Probendurchsatzes und eine Minimierung des personellen und materiellen Aufwandes angestrebt ohne dabei einen Qualitätsverlust der Methode zu erleiden. Eine gelungene Methoden-entwicklung bedurfte daher der Optimierung der Probenaufarbeitung, die sich neben den chemisch-physikalischen Eigenschaften des Wirkstoffes hauptsächlich an der Menge der zur Verfügung stehenden Probe orientierte. Das chromato-graphische System hingegen hing weitestgehend von den chemischen Eigenschaften des Analyten und von den massenspektroskopischen Bedingungen ab, die verdampfbare Puffer im Fließmittel erforderten. Diese drei zu optimierenden Teilbereiche, die miteinander interagieren, wurden jeweils sorgsam aufeinander abgestimmt, um eine Methode zu entwickeln, die die zu erwartenden Wirkstoffkonzentrationen in der jeweiligen Matrix sicher und robust bis hin zum Quantifizierungslimit bestimmen konnte.