Refine
Has Fulltext
- yes (48) (remove)
Is part of the Bibliography
- yes (48)
Year of publication
Document Type
- Doctoral Thesis (48) (remove)
Keywords
- Tissue Engineering (24)
- In-vitro-Kultur (4)
- In vitro (3)
- Stammzelle (3)
- Zellkultur (3)
- 3D tumour model (2)
- Dünndarm (2)
- Elektrospinnen (2)
- Gewebekultur (2)
- Hautmodell (2)
Institute
- Lehrstuhl für Tissue Engineering und Regenerative Medizin (48) (remove)
Sonstige beteiligte Institutionen
Diese Arbeit hatte zum Ziel quantitative Analysen histologischer Aufnahmen der Haut nach unterschiedlichen Gesichtspunkten zu etablieren. Im ersten Abschnitt wurde die bildgestützte Quantifizierung der epidermalen Histomorphologie untersucht. Nach Sichtung und Beurteilung von 2145 hochauflösenden Fotografien HE-gefärbter Epidermis- und Vollhautmodellen jeglichen Zustands, wurde der BSGC-Score als Facettenklassifikation mit seinen insgesamt 40 Beurteilungskriterien aufgestellt. Die unterschiedlichen epidermalen Strata wurden mit Wichtungsfaktoren belegt. Die Bewertungskategorien sind mit einem Ampelsystem unterlegt. Eine Befundungsformel wurde aufgestellt. Weitere Bestandteile des BSGC-Scores sind eine Anleitung mit Bildbeilage sowie Dokumentationselemente. Die Anwendung erfolgte erfolgreich im Rahmen der Qualitätssicherung an Chargentests und zur Verlaufsbeurteilung eines In-vitro-Verbrennungsmodells aus humaner Epidermis durch Schneider et al. (2021) Der BSGC-Score dient als zügig durchführbares Evaluationstool zur Befundung von In-vitro-Epidermismodellen und nicht als diagnostisches Mittel. Der zweite Abschnitt beschäftigt sich mit der Vaskularisierung als Parameter der kutanen Wundheilung. Es wurden aSMA-IF-gefärbte Abbildungen porciner Verwundungsmodelle betrachtet und nach der Entfernung drüsiger Strukturen Gefäßanschnitte zu Beginn manuell ausgezählt. Hieraus wurden die nötigen Einstellungen für die Bildbearbeitungssoftware ImageJ ermittelt und die Abbildungen dieser anschließend zugeführt. Es erfolgte die automatisierte Quantifizierung elliptischer Formationen mit einer Größe ≥ 30 Pixel. Im nächsten Schritt wurden die Abbildungen in die Bereiche Wundrand, Wundgrund und Wundheilung unterteilt. In dem Bereich Wundheilung zeigte sich eine signifikant größere Revaskularisierung als in Wundgrund. Abschließend erfolgte der Vergleich sekundärer Wundauflagen. Der Vergleich der Quotienten Wundheilung/Wundgrund nicht-okklusiver und okklusiver Wundauflagen zeigte keinen signifikanten Unterschied in der Neovaskularisierung. Die isolierte Betrachtung der Revaskularisierung als einzelner Prozess der Wundheilung kann nicht als generelles Kriterium für die Gesamtbeurteilung dienen. Hier findet die gewählte Methodik ihre Limitation. Zukünftige Anwendungsbereiche des BSGC-Scores sind die Ausweitung auf Vollhautmodelle und andere Verwundungsmodalitäten. Eine automatisierte und durch eine KI-gestützte Befundung ist ebenfalls aufgrund des zugrundeliegenden umfangreichen Datensatzes denkbar. Auch kann eine automatisierte softwaregestützte Quantifizierung der Vaskularisierung als überblickende und zügige Beurteilung der Wundheilung sinnvoll erscheinen.
Lung cancer is the main cause of cancer-related deaths worldwide. Despite the availability of several targeted therapies and immunotherapies in the clinics, the prognosis for lung cancer remains poor. A major problem for the low benefit of these therapies is intrinsic and acquired resistance, asking for pre-clinical models for closer investigation of predictive biomarkers for refined personalized medicine and testing of possible combination therapies as well as novel therapeutic approaches to break resistances.
One third of all lung adenocarcinoma harbor mutations in the KRAS gene, of which 39 % are transitions from glycine to cysteine in codon 12 (KRASG12C). Being considered “undruggable” in previous decades, KRASG12C-inhibitors now paved the way into the standard-of-care for lung adenocarcinoma treatment in the clinics. Still, the overall response rates as well as overall survival of patients treated with KRASG12C-inhibitors are sobering. Therefore, 3D KRASG12C-biomarker in vitro models were developed based on a decellularized porcine jejunum (SISmuc) using commercial and PDX-derived cell lines and characterized in regards of epithelial-mesenchymal-transition (EMT), stemness, proliferation, invasion and c-MYC expression as well as the sensitivity towards KRASG12C-inhibiton. The phenotype of lung tumors harboring KRAS mutations together with a c-MYC overexpression described in the literature regarding invasion and proliferation for in vivo models was well represented in the SISmuc models. A higher resistance towards targeted therapies was validated in the 3D models compared to 2D cultures, while reduced viability after treatment with combination therapies were exclusively observed in the 3D models. In the test system neither EMT, stemness nor the c-MYC expression were directly predictive for drug sensitivity. Testing of a panel of combination therapies, a sensitizing effect of the aurora kinase A (AURKA) inhibitor alisertib for the KRASG12C-inhibitor ARS-1620 directly correlating with the level of c-MYC expression in the corresponding 3D models was observed. Thereby, the capability of SISmuc tumor models as an in vitro test system for patient stratification was demonstrated, holding the possibility to reduce animal experiments.
Besides targeted therapies the treatment of NSCLC with oncolytic viruses (OVs) is a promising approach. However, a lack of in vitro models to test novel OVs limits the transfer from bench to bedside. In this study, 3D NSCLC models based on the SISmuc were evaluated for their capability to perform efficacy and risk assessment of oncolytic viruses (OVs) in a pre-clinical setting. Hereby, the infection of cocultures of tumor cells and fibroblasts on the SISmuc with provided viruses demonstrated that in contrast to a wildtype herpes simplex virus 1 (HSV-1) based OV, the attenuated version of the OV exhibited specificity for NSCLC cells with a more advanced and highly proliferative phenotype, while fibroblasts were no longer permissive for infection. This approach introduced SISmuc tumor models as novel test system for in vitro validation of OVs.
Finally, a workflow for validating the efficacy of anti-cancer therapies in 3D tumor spheroids was established for the transfer to an automated platform based on a two-arm-robot system. In a proof-of-concept process, H358 spheroids were characterized and treated with the KRASG12C-inhibitor ARS-1620. A time- and dose-dependent reduction of the spheroid area after treatment was defined together with a live/dead-staining as easy-to-perform and cost-effective assays for automated drug testing that can be readily performed in situ in an automated system.
Einleitung: Strukturelle Defekte der gastrointestinalen Hohlorgane stellen ein allgegen-wärtiges Problem im klinischen Alltag dar. Sie entstehen meist auf dem Boden einer ent-zündlichen oder tumorösen Grunderkrankung und können außerdem traumatisch sowie durch medizinische Eingriffe hervorgerufen werden. In der Folge kommt es zur Kontami-nation des umliegenden Gewebes mit Magen- bzw. Darminhalt, wodurch deletäre Folgen wie eine systemische Infektion, also eine Sepsis mit Multiorganversagen drohen können. Vor diesem Hintergrund sind gastrointestinale Defekte immer als potenziell lebensbedroh-lich für den Patienten zu betrachten. Die adäquate und kausale Behandlung erfolgt je nach Ätiologie und Zustand des Patienten durch eine Operation oder eine endoskopische Inter-vention. Hierzu stehen zahlreiche etablierte, operative und interventionelle Therapieme-thoden zur Verfügung. In manchen Fällen stoßen die etablierten Techniken jedoch an ihre Grenzen. Bei Patienten mit schwerwiegenden Komorbiditäten oder im Rahmen neuer me-dizinischer Verfahren sind Innovationen gefragt. Die Grundidee der vorliegenden Arbeit ist die Entwicklung einer biotechnologischen Therapieoption zur Versorgung gastrointesti-naler Hohlorganperforationen.
Methoden: Zur Durchführung einer Machbarkeitsstudie wurden zehn Göttinger Mi-nischweine in zwei Gruppen mit jeweils 5 Tieren aufgeteilt. Den Tieren der Experimental-gruppe wurden Hautbiopsien entnommen und daraus Fibroblasten isoliert, welche vo-rübergehend konserviert wurden. Unter Verwendung von azellularisiertem Schweinedarm erfolgte die Herstellung von Implantaten nach den Prinzipien des Tissue Engineerings. Die Tiere beider Gruppen wurden einer Minilaparotomie und einer ca. 3cm-Inzision der Ma-genvorderwand unterzogen. Die anschließende Versorgung wurde in der Experimental-gruppe durch Implantation der neuartigen Konstrukte erzielt. In der Kontrollgruppe wur-de im Sinne des Goldstandards eine konventionelle Naht durchgeführt. Anschließend wurden die Tiere für vier Wochen beobachtet. Eine bzw. zwei Wochen nach dem pri-mären Eingriff wurde bei allen Tieren beider Gruppen eine Laparoskopie bzw. Gastrosko-pie durchgeführt. Am Ende der klinischen Observationsphase wurden die Versuchstiere getötet und die entsprechenden Magenareale zur histologischen Untersuchung explantiert.
Ergebnisse: Die Herstellung der Implantate konnte auf der Basis standardisierter zellbio-logischer Methoden problemlos etabliert werden. Alle Tiere beider Gruppen überlebten den Primäreingriff sowie das vierwöchige Nachbeobachtungsintervall und zeigten dabei keine klinischen Zeichen möglicher Komplikationen. Die durchgeführten Laparoskopien und Gastroskopien ergaben bei keinem der Tiere Hinweise auf Leckagen oder lokale Infek-tionsprozesse. Die histologische Aufarbeitung zeigte im Bereich des ursprünglichen De-fekts eine bindegewebige Überbrückung sowie ein beginnendes Remodeling der Magen-schleimhaut in beiden Gruppen.
Schlussfolgerungen: Durch die Verknüpfung von Einzelprozessen der Zellkultur und dem Großtier-OP konnte ein neues Verfahren zum Verschluss gastrointestinaler Defekt erfolgreich demonstriert und etabliert werden. Das Projekt konnte reibungslos durchge-führt werden und lieferte Ergebnisse, die dem Goldstandard nicht unterlegen waren. Auf-grund der kleinen Fallzahl und weiterer methodischer Limitationen sind jedoch nur einge-schränkt Schlussfolgerungen möglich, weshalb die Durchführung größerer und gut geplan-ter Studien notwendig ist. Die Erkenntnisse dieser Pilotstudie liefern eine solide Basis für die Planung weiterführender Untersuchungen.
Adoptive cellular immunotherapy with chimeric antigen receptor (CAR) T cells is highly effective in haematological malignancies. This success, however, has not been achieved in solid tumours so far. In contrast to hematologic malignancies, solid tumours include a hostile tumour microenvironment (TME), that poses additional challenges for curative effects and consistent therapeutic outcome. These challenges manifest in physical and immunological barriers that dampen efficacy of the CAR T cells. Preclinical testing of novel cellular immunotherapies is performed mainly in 2D cell culture and animal experiments. While 2D cell culture is an easy technique for efficacy analysis, animal studies reveal information about toxicity in vivo. However, 2D cell culture cannot fully reflect the complexity observed in vivo, because cells are cultured without anchorage to a matrix and only short-term periods are feasible. Animal studies provide a more complex tissue environment, but xenografts often lack human stroma and tumour inoculation occurs mostly ectopically. This emphasises the need for standardisable and scalable tumour models with incorporated TME-aspects, which enable preclinical testing with enhanced predictive value for the clinical outcome of immunotherapies. Therefore, microphysiologic 3D tumour models based on the biological SISmuc (Small Intestinal mucosa and Submucosa) matrix with preserved basement membrane were engaged and improved in this work to serve as a modular and versatile tumour model for efficacy testing of CAR T cells. In order to reflect a variety of cancer entities, TME-aspects, long-term stability and to enhance the read-out options they were further adapted to achieve scalable and standardisable defined microphysiologic 3D tumour models. In this work, novel culture modalities (semi-static, sandwich-culture) were characterised and established that led to an increased and organised tissue generation and long-term stability. Application of the SISmuc matrix was extended to sarcoma and melanoma models and serial bioluminescence intensity (BLI)-based in vivo imaging analysis was established in the microphysiologic 3D tumour models, which represents a time-efficient read-out method for quality evaluation of the models and treatment efficacy analysis, that is independent of the cell phenotype. Isolation of cancer-associated-fibroblasts (CAFs) from lung (tumour) tissue was demonstrated and CAF-implementation further led to stromal-enriched microphysiologic 3D tumour models with in vivo-comparable tissue-like architecture. Presence of CAFs was confirmed by CAF-associated markers (FAP, α-SMA, MMP-2/-9) and cytokines correlated with CAF phenotype, angiogenesis, invasion and immunomodulation. Additionally, an endothelial cell barrier was implemented for static and dynamic culture in a novel bioreactor set-up, which is of particular interest for the analysis of immune cell diapedesis. Studies in microphysiologic 3D Ewing’s sarcoma models indicated that sarcoma cells could be sensitised for GD2-targeting CAR T cells. After enhancing the scale of assessment of the microphysiologic 3D tumour models and improving them for CAR T cell testing, the tumour models were used to analyse their sensitivity towards differently designed receptor tyrosine kinase-like orphan receptor 1 (ROR1) CAR T cells and to study the effects of the incorporated TME-aspects on the CAR T cell treatment respectively. ROR1 has been described as a suitable target for several malignancies including triple negative breast cancer (TNBC), as well as lung cancer. Therefore, microphysiologic 3D TNBC and lung cancer models were established. Analysis of ROR1 CAR T cells that differed in costimulation, spacer length and targeting domain, revealed, that the microphysiologic 3D tumour models are highly sensitive and can distinguish optimal from sub-optimal CAR design. Here, higher affinity of the targeting domain induced stronger anti-tumour efficacy and anti-tumour function depended on spacer length, respectively. Long-term treatment for 14 days with ROR1 CAR T cells was demonstrated in dynamic microphysiologic 3D lung tumour models, which did not result in complete tumour cell removal, whereas direct injection of CAR T cells into TNBC and lung tumour models represented an alternative route of application in addition to administration via the medium flow, as it induced strong anti-tumour response. Influence of the incorporated TME-aspects on ROR1 CAR T cell therapy represented by CAF-incorporation and/or TGF-β supplementation was analysed. Presence of TGF-β revealed that the specific TGF-β receptor inhibitor SD-208 improves ROR1 CAR T cell function, because it effectively abrogated immunosuppressive effects of TGF-β in TNBC models. Implementation of CAFs should provide a physical and immunological barrier towards ROR1 CAR T cells, which, however, was not confirmed, as ROR1 CAR T cell function was retained in the presence of CAFs in stromal-enriched microphysiologic 3D lung tumour models. The absence of an effect of CAF enrichment on CAR T cell efficacy suggests a missing component for the development of an immunosuppressive TME, even though immunomodulatory cytokines were detected in co-culture models. Finally, improved gene-edited ROR1 CAR T cells lacking exhaustion-associated genes (PD-1, TGF-β-receptor or both) were challenged by the combination of CAF-enrichment and TGF-β in microphysiologic 3D TNBC models. Results indicated that the absence of PD-1 and TGF-β receptor leads to improved CAR T cells, that induce strong tumour cell lysis, and are protected against the hostile TME. Collectively, the microphysiologic 3D tumour models presented in this work reflect aspects of the hostile TME of solid tumours, engage BLI-based analysis and provide long-term tissue homeostasis. Therefore, they present a defined, scalable, reproducible, standardisable and exportable model for translational research with enhanced predictive value for efficacy testing and candidate selection of cellular immunotherapy, as exemplified by ROR1 CAR T cells.
Electrochemical impedance spectroscopy (EIS) is a valuable technique analyzing electrochemical behavior of biological systems such as electrical characterization of cells and biomolecules, drug screening, and biomaterials in biomedical field. In EIS, an alternating current (AC) power signal is applied to the biological system, and the impedance of the system is measured over a range of frequencies.
In vitro culture models of endothelial or epithelial barrier tissue can be achieved by culturing barrier tissue on scaffolds made with synthetic or biological materials that provide separate compartments (apical and basal sides), allowing for further studies on drug transport. EIS is a great candidate for non-invasive and real-time monitoring of the electrical properties that correlate with barrier integrity during the tissue modeling. Although commercially available transendothelial/transepithelial electrical resistance (TEER) measurement devices are widely used, their use is particularly common in static transwell culture. EIS is considered more suitable than TEER measurement devices in bioreactor cultures that involve dynamic fluid flow to obtain accurate and reliable measurements. Furthermore, while TEER measurement devices can only assess resistance at a single frequency, EIS measurements can capture both resistance and capacitance properties of cells, providing additional information about the cellular barrier's characteristics across various frequencies. Incorporating EIS into a bioreactor system requires the careful optimization of electrode integration within the bioreactor setup and measurement parameters to ensure accurate EIS measurements. Since bioreactors vary in size and design depending on the purpose of the study, most studies have reported using an electrode system specifically designed for a particular bioreactor. The aim of this work was to produce multi-applicable electrodes and established methods for automated non-invasive and real-time monitoring using the EIS technique in bioreactor cultures. Key to the electrode material, titanium nitride (TiN) coating was fabricated on different substrates (materials and shape) using physical vapor deposition (PVD) and housed in a polydimethylsiloxane (PDMS) structure to allow the electrodes to function as independent units. Various electrode designs were evaluated for double-layer capacitance and morphology using EIS and scanning electron microscopy (SEM), respectively. The TiN-coated tube electrode was identified as the optimal choice. Furthermore, EIS measurements were performed to examine the impact of influential parameters related to culture conditions on the TiN-coated electrode system. In order to demonstrate the versatility of the electrodes, these electrodes were then integrated into in different types of perfusion bioreactors for monitoring barrier cells. Blood-brain barrier (BBB) cells were cultured in the newly developed dynamic flow bioreactor, while human umblical vascular endothelial cells (HUVECs) and Caco-2 cells were cultured in the miniature hollow fiber bioreactor (HFBR). As a result, the TiN-coated tube electrode system enabled investigation of BBB barrier integrity in long-term bioreactor culture. While EIS measurement could not detect HUVECs electrical properties in miniature HFBR culture, there was the possibility of measuring the barrier integrity of Caco-2 cells, indicating potential usefulness for evaluating their barrier function. Following the bioreactor cultures, the application of the TiN-coated tube electrode was expanded to hemofiltration, based on the hypothesis that the EIS system may be used to monitor clotting or clogging phenomena in hemofiltration. The findings suggest that the EIS monitoring system can track changes in ion concentration of blood before and after hemofiltration in real-time, which may serve as an indicator of clogging of filter membranes. Overall, our research demonstrates the potential of TiN-coated tube electrodes for sensitive and versatile non-invasive monitoring in bioreactor cultures and medical devices.
Biomechanische Eigenschaften eines biomaterialbasierten Kreuzbandkonstruktes in-vivo und in-vitro
(2023)
Kreuzbandrupturen stellen nach wie vor eine Herausforderung in der klinischen Praxis hinsichtlich kurz- und langfristiger unerwünschter Nebenwirkungen dar (z.B. Reruptur und Arthrosebildung).
In der vorliegenden Arbeit wird der entwickelte Ansatz eines Kollagen-I-basierten künstlichen Kreuzbandkonstruktes hinsichtlich der Reißfestigkeit, Lagerung, Verstärkungsmöglichkeit mittels Fiber-tape und langfristigen Arthroseentstehung untersucht mittels in-vitro und in-vivo Untersuchungen unter zur Hilfe nahme des Minipig Tiermodels.
Die Ergebnisse zeigen keinen Einfluss der Lagerungstemperatur sowie des Lagerungszeitraums auf die Reißfestigkeit des Konstruktes, sowie eine mögliche initiale Verstärkung mittels Fibertape im Minipig. Darüber hinaus wurde mikroskopisch wie makroskopische Arthroseentstehung nachgewiesen. Das Ausmaß der Arthroseentstehung ist diesbezüglich mit einer Abweichung der Konstruktimplantation von der ursprünglichen Kreuzbandinsertion mittels MRT bestätigt worden.
Die Vordere Kreuzband (VKB)-Ruptur ist eine häufige Verletzung, welche eine hohe individuelle und sozioökonomische Belastung verursacht. Eine etablierte Therapie ist die VKB-Plastik, problematisch sind jedoch die hohen Rerupturraten nach operativer Versorgung. In der Annahme, dass Mesenchymale Stammzellen (MSC) eine bedeutende Rolle für die Heilung spielen, sollte in der vorliegenden Arbeit untersucht werden, ob ein Zusammenhang zwischen Zahl und Qualität der aus dem VKB isolierten MSC sowie der Latenz zwischen Ruptur und Rekonstruktion besteht und so ein optimaler Therapiezeitraum eingegrenzt werden kann.
Zunächst erfolgte die Zellisolierung aus intraoperativ gewonnenen VKB-Biopsien. Je nach Latenz zwischen Ruptur und Operation wurden drei Gruppen (akute ≙ ≤ 30 d, subakute ≙ 31-90 d, verzögerte Rekonstruktion ≙ > 90 d) gebildet. Zum Nachweis von MSC wurden die Zellen hinsichtlich ihrer Plastikadhärenz, eines multipotenten Differenzierungspotentials sowie eines spezifischen Oberflächenantigenmusters (CD73+, CD90+, CD105+, CD34-) untersucht. Zudem wurde ihr Einflusses auf die biomechanischen und histologischen Eigenschaften eines analysiert.
Der Nachweis von MSC war in allen Gruppen möglich. Das Proliferationspotential war in Gruppe II am größten, ebenso der Anteil der MSC an allen Zellen. Er war 5,4% (4,6% - 6,3%, 95% CI; p < 0,001) höher als in Gruppe I und 18,9% (18,2% - 19,6%, 95% CI; p < 0,001) höher als in Gruppe III. In den mit Zellen kultivierten Bandkonstrukten konnte im Gegensatz zu zellfreien Konstrukten humanes Kollagen I nachgewiesen werden. Die Stabilität nahm bei Kultivierung mit Zellen ab.
Die Ergebnisse legen nahe, dass das Regenerationspotential bei subakuter VKB-Rekonstruktion (31-90 d) am höchsten ist. Potenziell ursächlich sind die Regeneration hemmende Entzündungsprozesse zu Beginn sowie degenerative Prozesse im längerfristigen Verlauf. Zudem konnte gezeigt werden, dass die isolierten Zellen die Eigenschaften eines Bandkonstruktes durch Bildung von Kollagen I und Reduktion der Stabilität im kurzfristigen Verlauf verändern und dementsprechend den Therapieerfolg beeinflussen könnten. Zur Verifizierung der Ergebnisse bedarf es weiterer Untersuchungen.
Das maligne Melanom nimmt als Tumorerkrankung mit hoher Metastasierungsrate und steigenden Inzidenzraten bei höchster Mortalität aller Hauttumoren eine zunehmende Bedeutung in der modernen Onkologie ein. Frühzeitige Diagnosemöglichkeiten und moderne Behandlungen konnten das Überleben der Patienten bereits erheblich verbessern. Jedoch besteht nach wie vor Bedarf an geeigneten Modellen, um die Melanomprogression vollständig zu verstehen und neue wirksame Therapien zu entwickeln. Hierfür werden häufig Tiermodelle verwendet, diese spiegeln jedoch nicht die menschliche Mikroumgebung wider. Zweidimensionalen Zellkulturen fehlen dagegen entscheidende Elemente der Tumormikroumgebung. Daher wurde in dieser Arbeit ein dreidimensionales epidermales Tumormodell des malignen Melanoms, welches aus primären humanen Keratinozyten und verschiedenen Melanomzelllinien besteht, entwickelt. Die eingesetzten Melanomzelllinien variieren in ihren Treibermutationen, wodurch das Modell in der Lage ist, Wirkstoffe zu untersuchen, die spezifisch auf diese Mutationen wirken. Mit Techniken des Tissue Engineerings konnte ein dreidimensionales Hautmodell aufgebaut werden, das alle charakteristischen Schichten der Epidermis aufweist und im Bereich des stratum basale Melanomcluster ausbildet. Diese reichen je nach Größe und Ausdehnung bis in suprabasale Epidermisschichten hinein. Die Tumor-Histopathologie, der Tumorstoffwechsel sowie tumorassoziierte Proteinsekretionen ließen sich im in vitro Modell nachweisen. Darüber hinaus konnte ein Protokoll entwickelt werden, mit dem einzelne Zellen aus den Modellen reisoliert werden können. Dies ermöglichte es, den Proliferationszustand innerhalb des jeweiligen Modells zu charakterisieren und die Wirkung von Antitumortherapien gezielt zu bewerten. Die Anwendbarkeit als Testsystem im Bereich der Tumortherapeutika wurde mit dem in der Klinik häufig verwendeten v-raf-Maus-Sarkom-Virus-Onkogen-Homolog B (BRAF)-Inhibitor Vemurafenib demonstriert. Der selektive BRAF-Inhibitor reduzierte erfolgreich das Tumorwachstum in den Modellen mit BRAF-mutierten Melanomzellen, was durch eine Verringerung der metabolischen Aktivität, der proliferierenden Zellen und des Glukoseverbrauchs gezeigt wurde. Für die Implementierung des Modells in die präklinische Therapieentwicklung wurde B-B-Dimethylacrylshikonin, ein vielversprechender Wirkstoffkandidat, welcher einen Zellzyklusarrest mit anschließender Apoptose bewirkt, im Modell getestet.
Bei einer Anwendung der Modelle im Bereich der Testung topischer Behandlungen ist eine Barrierefunktion der Modelle notwendig, die der in vivo Situation nahe kommt. Die Barriereeigenschaften der Hautäquivalente wurden durch die Melanomzellen nachweislich nicht beeinflusst, sind aber im Vergleich zur in vivo Situation noch unzureichend. Eine signifikante Steigerung der Hautbarriere konnte durch die Bereitstellung von Lipiden und die Anregung hauteigener Regenerationsprozesse erreicht werden. Über den Nachweis des transepidermalen Wasserverlusts konnte eine Messmethode zur nicht-invasiven Bestimmung der Hautbarriere etabliert und über den Vergleich zur Impedanzspektroskopie validiert werden. Hierbei gelang es, erstmals die Korrelation der Hautmodelle zur in vivo Situation über ein solches Verfahren zu zeigen. Das entwickelte epidermale Modell konnte durch die Integration eines dermalen Anteils und einer Endothelzellschicht noch weiter an die komplexe Struktur und Physiologie der Haut angepasst werden um Untersuchungen, die mit der Metastierung und Invasion zusammenhängen, zu ermöglichen. Die artifizielle Dermis basiert auf einem Kollagen-Hydrogel mit primären Fibroblasten. Eine dezellularisierte Schweinedarmmatrix ließ sich zur Erweiterung des Modells um eine Endothelzellschicht nutzen. Dabei wanderten die primären Fibroblasten apikal in die natürliche Schweindarmmatrix ein, während die Endothelzellen basolateral eine geschlossene Schicht bildeten.
Die in dieser Arbeit entwickelten Gewebemodelle sind in der Lage, die Vorhersagekraft der in vitro Modelle und die in vitro - in vivo Korrelation zu verbessern. Durch die Kombination des Melanommodells mit einer darauf abgestimmten Analytik wurde ein neuartiges Werkzeug für die präklinische Forschung zur Testung von pharmazeutischen Wirkstoffen geschaffen.
Diabetes mellitus is an incurable, metabolic disease, which is associated with severe long-term complications. The in vitro generation of pancreatic β-cells from human induced pluripotent stem cells (hiPSCs) represent a promising strategy for a curative therapy of diabetes mellitus. However, current differentiation strategies largely fail to produce functional β-cells in vitro and require an additional in vivo transplantation to achieve terminal maturation. Previous studies demonstrated a beneficial effect of the extracellular matrix (ECM) on the survival and sustained function of adult, isolated islets of Langerhans. This raises the question whether organ-specific cell-ECM interactions might represent the missing link driving the final stage of β-cell development. In order to address this issue, this study investigated the impact of the pancreas ECM on in vitro β-cell differentiation and its use for the establishment of a pancreatic endocrine organ model.
To this purpose, a pancreas-specific ECM scaffolds (PanMa) was derived from porcine pancreata using whole organ decellularization with Sodium Deoxycholate. In a first step, the generated PanMa was thoroughly characterized using (immuno-) histological stainings, scanning electron microscopy and DNA quantification as well as perfusion and recellularization experiments with endothelial cells. Based on these data, a scoring system (PancScore) for a standardized PanMa generation was developed. Next, the generated PanMa was tested for the presence of tissue-specific ECM features. Therefore, the biophysical and physico-structural characteristics, such as rigidity, porosity and hygroscopy were analyzed using rheological measurements, particle diffusion analyses as well as a water evaporation assay and compared to the properties of ECM scaffolds derived from porcine small intestine (SISser) and lung (LungMa) to examine organ-specific scaffold cues. Following the thorough scaffold characterization, the impact of the PanMa on pluripotency and early development of hiPSC was studied. To this purpose, gene and protein expression of hiPSCs during maintenance culture and spontaneous differentiation on the PanMa were assessed. In a next step, the impact of the PanMa on the pancreatic endocrine differentiation of hiPSCs was tested. Therefore, the PanMa was used as a liquid media supplement or as a solid scaffold during the directed differentiation of hiPSC towards either pancreatic hormone-expressing cells (Rezania et al. 2012; Rezania et al. 2014) or maturing β-cells (Rezania et al. 2014). The impact of the PanMa on the generated cells was examined by gene expression analysis, immunohistochemical staining of important stage markers, as well as glucose stimulated insulin secretion assays. In a last part of this study, the potential of the PanMa for the prolonged culture of hiPSC derived endocrine cells for the establishment of an in vitro organ model of the endocrine pancreas was examined. Therefore, a PanMa-derived hydrogel was generated and used for the encapsulation and culture of hiPSC-derived hormone-expressing cells (HECs). The influence of the PanMa-hydrogel culture was analyzed on gene, protein and functional level by gene expression analysis, immunohistochemical stainings and glucose stimulated insulin secretion.
Whole organ decellularization resulted in the generation of an acellular PanMa scaffold, with low amounts of residual DNA and a preserved ECM micro- and ultrastructure, including important ECM components, such as collagen I, III and IV. Furthermore, the PanMa maintained an intact vessel system and was verified as cytocompatible as demonstrated by the successful recellularization of the arterial system with human endothelial cells. In comparison to SISser and LungMa, the PanMa was characterized as a relative soft, hygroscopic scaffold with a collagen-fiber based structure. Furthermore, the findings indicate that the ECM-specific properties have a relevant effect on the stem cell character and early multi-lineage decisions of hiPSCs. In this regard, maintenance of hiPSCs on the PanMa resulted in a slightly changed expression of pluripotency genes (OCT4, SOX2 and NANOG) and a weak immunohistochemical signal for NANOG protein, indicating a PanMa-dependent impact on hiPSC pluripotency. Strikingly, this presumption was corroborated by the finding that culture on the PanMa promoted an endodermal development of hiPSCs during spontaneous differentiation. In line with that, pancreatic differentiation of hiPSC on both the PanMa and SISser resulted in a significant decrease of glucagon and somatostatin gene expression as well as an unaltered insulin expression, suggesting an ECM-driven suppression of the development of non β-cell endocrine cells. However, this change did not result in an improved glucose stimulated insulin secretion of the generated HECs. Moreover, use of the PanMa as a hydrogel allowed prolonged culture of these cells in a defined culture system. HECs were viable after 21 days of culture, however already showed an altered islet morphology as well as a slightly decreased glucose stimulated insulin secretion.
Altogether, this study demonstrates a relevant biological effect of tissue specific ECM cues on the in vitro differentiation of hiPSCs. More specifically, the data indicate an involvement of the ECM in the endocrine commitment of hiPSC-derived pancreatic cells during directed differentiation highlighting the ECM as an important regulator of pancreatic development. Collectively, these findings emphasize the relevance of the ECM for the fabrication of functional hiPSC-derived cell types and suggest a much stronger consideration of organ specific ECM cues for tissue engineering approaches as well as clinical translation in regenerative medicine.
Onchocerciasis, the world's second-leading infectious cause of blindness in humans
–prevalent in Sub-Saharan Africa – is caused by Onchocerca volvulus (O. volvulus), an
obligatory human parasitic filarial worm. Commonly known as river blindness,
onchocerciasis is being targeted for elimination through ivermectin-based mass
drug administration programs. However, ivermectin does not kill adult parasites,
which can live and reproduce for more than 15 years within the human host. These
impediments heighten the need for a deeper understanding of parasite biology and
parasite-human host interactions, coupled with research into the development of
new tools – macrofilaricidal drugs, diagnostics, and vaccines. Humans are the only
definitive host for O. volvulus. Hence, no small-animal models exist for propagating
the full life cycle of O. volvulus, so the adult parasites must be obtained surgically
from subcutaneous nodules. A two-dimensional (2D) culture system allows that
O. volvulus larvae develop from the vector-derived infective stage larvae (L3) in vitro
to the early pre-adult L5 stages. As problematic, the in vitro development of
O. volvulus to adult worms has so far proved infeasible. We hypothesized that an
increased biological complexity of a three-dimensional (3D) culture system will
support the development of O. volvulus larvae in vitro. Thus, we aimed to translate
crucial factors of the in vivo environment of the developing worms into a culture
system based on human skin. The proposed tissue model should contain 1. skinspecific
extracellular matrix, 2. skin-specific cells, and 3. enable a direct contact of
larvae and tissue components. For the achievement, a novel adipose tissue model
was developed and integrated to a multilayered skin tissue comprised of epidermis,
dermis and subcutis. Challenges of the direct culture within a 3D tissue model
hindered the application of the three-layered skin tissue. However, the indirect coculture
of larvae and skin models supported the growth of fourth stage (L4) larvae in
vitro. The direct culture of L4 and adipose tissue strongly improved the larvae
survival. Furthermore, the results revealed important cues that might represent the
initial encapsulation of the developing worm within nodular tissue. These results
demonstrate that tissue engineered 3D tissues represent an appropriate in vitro
environment for the maintenance and examination of O. volvulus larvae.
Respiratory infections are a significant health concern worldwide, and the airway epithelium plays a crucial role in regulating airway function and modulating inflammatory processes. However, most studies on respiratory infections have used cell lines or animal models, which may not accurately reflect native physiological conditions, especially regarding human pathogens. We generated human nasal mucosa (hNM) and tracheobronchial mucosa (hTM) models to address this issue using primary human airway epithelial cells and fibroblasts. We characterised these human airway tissue models (hAM) using high speed video microscopy, single cell RNA sequencing, immunofluorescence staining,
and ultrastructural analyses that revealed their complexity and cellular heterogeneity. We demonstrated that Bordetella pertussis virulence factor adenylate cyclase toxin (CyaA) elevated the intracellular production of cyclic adenosine monophosphate (cAMP) and secretion of interleukin (IL) 6, IL 8, and human beta defensin 2 (HBD2). In addition, we compared the responses of the tissue models from two different anatomical sites (the upper and lower respiratory mucosa) and are the first to report such differential susceptibility towards CyaA using 3D primary airway cell derivedmodels. The effect of toxin treatment on the epithelial barrier integrity of the tissue models was assessed by measuring the flux of fluorescein isothiocyanate (FITC)-conjugated dextran across the models. Though we observed a cell type specific response with respect to intracellular cAMP production and IL 6, IL 8, and HBD2 secretion in the models treated with CyaA on the apical side, the epithelial membrane barrier integrity was not compromised. In addition to toxin studies, using these characterised models, we established viral infection studies for Influenza A (IAV), Respiratory Syncytial Virus subtype B (RSV), and severe acute respiratory syndrome coronavirus 2. We visualised the morphological consequences of the viral infection using ultrastructural analysis
and immunofluorescence. We verified the effective infection in hAM by measuring the viral RNA using RTqPCR and detected elevated cytokine levels in response to infection using biochemical assays. In contrast to cell lines, studies on viral infection using hAM demonstrated that infected areas were localized to specific regions. This led to the formation of infection hotspots, which were more likely to occur when models derived from different donors were infected separately with all three viruses. IAV infected tissue models replicate the clinical findings of H1N1 infection, such as mucus
hypersecretion, cytokine release, and infection-associated epithelial cell damage.Finally, we paved the steps towards understanding the impact of IAV infection on disease models. We generated hTM from biopsies obtained from chronic obstructive pulmonary disease (COPD) patients. As a model to study the impact of COPD on respiratory infections, considering the increase in COPD cases in the past decade and the continued predicted increase in the future. We established the IAV infection
protocol to capture the early infection signatures in non-COPD and COPD conditions using scRNA-seq. We investigated the infection kinetics of IAV (H1N1-clinical isolate) in hTM and found that viruses were actively released approximately 24 hours post infection. The scRNA-seq data from the hTM derived from non-COPD and COPD patients, revealed lower levels of SCGB1A1 (club cell marker) gene expression in the COPD-control group compared to the non-COPD control group, consistent with previous clinical studies. Furthermore, we observed that IAV infection elevated SCGB1A1 gene expression especially in secretory cells of both the COPD and non COPD groups. This may imply the role of club cells as early responders during IAV infection providing epithelial repair, regeneration, and resistance to spread of infection. This is the first study to address the molecular diversity in COPD and non-COPD disease models infected with IAV investigating the early response (6 h) of specific cell types in the human lower airways towards infection using scRNA-seq. These findings
highlight the potential interplay between COPD, IAV infection, and altered vulnerability to other viral infections and respiratory illnesses making the hAM applicable for addressing more specific research questions and validating potential targets, such as SCGB1A1 targeted therapy for chronic lung diseases. Our findings demonstrate the potential of the hNM and hTM for investigating respiratory infections, innate immune responses, and trained immunity in non-immune cells. Our experiments show that hAM may represent a more accurate representation of the native physiological condition and improve our understanding of the disease mechanisms. Furthermore, these models promote non-animal research as they replicate clinical findings. We can further increase their complexity by incorporating dynamic flow systems and immune cells catered to the research question.
Für die Verwendung von zellbasierten Therapeutika ist vor allem die korrekt Identifikation
sowohl vom Ausgangsmaterial wie auch dem produziertem Material von
zentraler Wichtigkeit. In dieser Arbeit wurde eine Methodik entwickelt, welche eine
nicht-invasive Klassifizierung von Zellen und zellulärer Entwicklung aufgrund ihrer
zweidimensionalen Magnetresonanz-Korrelationsspektren ermöglichte.
Hierzu wurde ein mobiler MR-Scanner mit einer Feldstärke von 0.5T und einem Isozentrum
von 1 cm3 verwendet. Aufgrund der kompakten und leichten Bauweise war
es möglich, das System in normalen Zellkulturlaboren zu verwenden. Von den Proben
wurde ein zweidimensionales T1/T2 -Korrelationsspektrum aufgenommen, anhand
dessen die Zellen klassifiziert werden sollten. Mithilfe von Agarose-Dotagraf® -Zell-
Phantomen konnte die Stabilität und Reproduzierbarkeit des Messsystems und der
verwendeten Sequenz validiert werden.
Aufgrund der unter Umständen recht langen Messzeiten der MR-Technologie war
auch die Handhabung und Kultur der Zellproben während des Messprozesses von
großer Bedeutung. Um hierfür den Durchsatz an Proben zu erhöhen, wurde eine kostengünstige
und ebenfalls mobile Robotikanlage entwickelt. Diese basierte auf dem
kommerziell erhältlichen Roboterarm Braccio, welcher durch einen Arduino Mega
Mikrocontroller gesteuert wurde. Mit bis zu 24 Proben pro Tag konnte durch die
Automatisierung der Durchsatz an Proben um den Faktor 3 – 4 gesteigert werden.
Durch den entwickelten Prozess war es möglich, eine umfangreiche Datenbank –
bestehend aus 362 unabhängigen Messungen (biologische Replikate) – aufzubauen.
Die Datenbank enthielt Messungen von zehn unterschiedlichen Zelllinien. Zusätzlich
wurden T1/T2 -Korrelationsspektren von mesenchymalen Stromazellen (MSCs)
vor und nach deren Differenzierung zu Adipocyten aufgenommen, um ihre zelluläre
Entwicklung nicht-invasiv charakterisieren zu können.
Die aufgenommenen Daten wurden mithilfe einer geeigneten Support Vector Machine
wie auch angepassten künstlichen neuronalen Netzwerken klassifiziert. Mithilfe
dieser Methoden konnten die Zelllinien und MSCs anhand ihrer aufgenommenen
Korrelationsspektren mit einer Genauigkeit von bis zu 98% klassifiziert werden.
Diese hohe Treffsicherheit legte den Schluss nahe, dass die Kombination aus nichtinvasiver,
zweidimensionaler T1/T2 -MR-Relaxometrie und der Verwendung von geeigneten
Methoden des machine learning und der künstlichen Intelligenz eine effiziente
Methodik für die nicht-invasive Klassifizierung von Zellen sowie zellulärer
Entwicklung darstellt.
Bone morphogenetic proteins (BMPs) are involved in various aspects of cell-cell communication in complex life forms. They act as morphogens, help differentiate different cell types from different progenitor cells in development, and are involved in many instances of intercellular communication, from forming a body axis to healing bone fractures, from sugar metabolism to angiogenesis. If the same protein or protein family carries out many functions, there is a demand to regulate and fine-tune their biological activities, and BMPs are highly regulated to generate cell- and context-dependent outcomes.
Not all such instances can be explained yet. Growth/differentiation factor (GDF)5 (or BMP14) synergizes with BMP2 on chondrogenic ATDC5 cells, but antagonizes BMP2 on myoblastic C2C12 cells. Known regulators of BMP2/GDF5 signal transduction failed to explain this context-dependent difference, so a microarray was performed to identify new, cell-specific regulatory components. One identified candidate, the fibroblast growth factor receptor (FGFR)2, was analyzed as a potential new co-receptor to BMP ligands such as GDF5: It was shown that FGFR2 directly binds BMP2, GDF5, and other BMP ligands in vitro, and FGFR2 was able to positively influence BMP2/GDF5-mediated signaling outcome in cell-based assays. This effect was independent of FGFR2s kinase activity, and independent of the downstream mediators SMAD1/5/8, p42/p44, Akt, and p38. The elevated colocalization of BMP receptor type IA and FGFR2 in the presence of BMP2 or GDF5 suggests a signaling complex containing both receptors, akin to other known co-receptors of BMP ligands such as repulsive guidance molecules.
This unexpected direct interaction between FGF receptor and BMP ligands potentially opens a new category of BMP signal transduction regulation, as FGFR2 is the second receptor tyrosine kinase to be identified as BMP co-receptor, and more may follow. The integration of cell surface interactions between members of the FGF and BMP family especially may widen the knowledge of such cellular communication mechanisms which involve both growth factor families, including morphogen gradients and osteogenesis, and may in consequence help to improve treatment options in osteochodnral diseases.
The small intestine represents a strong barrier separating the lumen from blood circulation thereby playing a major role in the absorption and the transport of pharmacological agents prior to their arrival on the respective target site. In order to gain more knowledge about specialized uptake mechanisms and risk assessment for the patient after oral admission of drugs, intestinal in vitro models demonstrating a close similarity to the in vivo situation are needed.
In the past, cell line-based in vitro models composed of Caco-2 cells cultured on synthetic cell carriers represented the “gold standard” in the field of intestinal tissue engineering. Expressive advantages of these models are a reproducible, cost-efficient and standardized model set up, but cell function can be negatively influenced by the low porosity or unwanted molecular adhesion effects of the artificial scaffold material. Natural extracellular matrices (ECM) such as the porcine decellularized small intestinal submucosa (SIS) are used as alternative to overcome some common drawbacks; however, the fabrication of these scaffolds is time- and cost-intensive, less well standardized and the 3Rs (replacement, reduction, refinement) principle is not entirely fulfilled. Nowadays, biopolymer-based scaffolds such as the bacterial nanocellulose (BNC) suggest an interesting option of novel intestinal tissue engineered models, as the BNC shows comparable features to the native ECM regarding fiber arrangement and hydrophilic properties. Furthermore, the BNC is of non-animal origin and the manufacturing process is faster as well as well standardized at low costs.
In this context, the first part of this thesis analyzed the BNC as alternative scaffold to derive standardized and functional organ models in vitro. Therefore, Caco-2 cells were cultured on two versions of BNC with respect to their surface topography, the unmodified BNC as rather smooth surface and the surface-structured BNC presenting an aligned fiber arrangement. As controls, Caco-2 in vitro models were set up on PET and SIS matrices. In this study, the BNC-based models demonstrated organ-specific properties comprising typical cellular morphologies, a characteristic tight junction protein expression profile, representative ultrastructural features and the formation of a tight epithelial barrier together with a corresponding transport activity. In summary, these results validated the high quality of the BNC-based Caco-2 models under cost-efficient conditions and their suitability for pre-clinical research purposes. However, the full functional diversity of the human intestine cannot be presented by Caco-2 cells due to their tumorigenic background and their exclusive representation of mature enterocytes.
Next to the scaffold used for the setup of in vitro models, the cellular unit mainly drives functional performance, which demonstrates the crucial importance of mimicking the cellular diversity of the small intestine in vitro. In this context, intestinal primary organoids are of high interest, as they show a close similarity to the native epithelium regarding their cellular diversity comprising enterocytes, goblet cells, enteroendocrine cells, paneth cells, transit amplifying cells and stem cells. In general, such primary organoids grow in a 3D Matrigel® based environment and a medium formulation supplemented with a variety of growth factors to maintain stemness, to inhibit differentiation and to stimulate cell migration supporting long term in vitro culture.
Intestinal primary spheroid/organoid cultures were set up as Transwell®-like models on both BNC variants, which resulted in a fragmentary cell layer and thereby unfavorable properties of these scaffold materials under the applied circumstances. As the BNC manufacturing process is highly flexible, surface properties could be adapted in future studies to enable a good cell adherence and barrier formation for primary intestinal cells, too. However, the application of these organoid cultures in pre-clinical research represents an enormous challenge, as the in vitro culture is complex and additionally time- and cost-intensive.
With regard to the high potential of primary intestinal spheroids/organoids and the necessity of a simplified but predictive model in pre-clinical research purposes, the second part of this thesis addressed the establishment of a primary-derived immortalized intestinal cell line, which enables a standardized and cost-efficient culture (including in 2D), while maintaining the cellular diversity of the organoid in vitro cultures. In this study, immortalization of murine and human intestinal primary organoids was induced by ectopic expression of a 10- (murine) or 12 component (human) pool of genes regulating stemness and the cell cycle, which was performed in cooperation with the InSCREENeX GmbH in a 2D- and 3D-based transduction strategy. In first line, the established cell lines (cell clones) were investigated for their cell culture prerequisites to grow under simplified and cost-efficient conditions. While murine cell clones grew on uncoated plastic in a medium formulation supplemented with EGF, Noggin, Y-27632 and 10% FCS, the human cell clones demonstrated the necessity of a Col I pre coating together with the need for a medium composition commonly used for primary human spheroid/organoid cultures. Furthermore, the preceding analyses resulted in only one human cell clone and three murine cell clones for ongoing characterization. Studies regarding the proliferative properties and the specific gene as well as protein expression profile of the remaining cell clones have shown, that it is likely that transient amplifying cells (TACs) were immortalized instead of the differentiated cell types localized in primary organoids, as 2D, 3D or Transwell®-based cultures resulted in slightly different gene expression profiles and in a dramatically reduced mRNA transcript level for the analyzed marker genes representative for the differentiated cell types of the native epithelium. Further, 3D cultures demonstrated the formation of spheroid-like structures; however without forming organoid-like structures due to prolonged culture, indicating that these cell populations have lost their ability to differentiate into specific intestinal cell types. The Transwell®-based models set up of each clone exhibit organ-specific properties comprising an epithelial-like morphology, a characteristic protein expression profile with an apical mucus-layer covering the villin-1 positive cell layer, thereby representing goblet cells and enterocytes, together with representative tight junction complexes indicating an integer epithelial barrier. The proof of a functional as well as tight epithelial barrier in TEER measurements and in vivo-like transport activities qualified the established cell clones as alternative cell sources for tissue engineered models representing the small intestine to some extent. Additionally, the easy handling and cell expansion under more cost-efficient conditions compared to primary organoid cultures favors the use of these newly generated cell clones in bioavailability studies.
Altogether, this work demonstrated new components, structural and cellular, for the establishment of alternative in vitro models of the small intestinal epithelium, which could be used in pre-clinical screenings for reproducible drug delivery studies.
Etablierung eines 3D Gewebemodells für die translationale Forschung am Malignen Pleuramesotheliom
(2022)
Einleitung:
Das maligne Pleuramesotheliom (MPM) ist ein aggressiver von den Mesothelzellen der Pleura ausgehender Tumor, der in der Regel Folge einer Exposition mit Asbest ist. Aufgrund der häufig für ein chirurgisches Vorgehen zu späten Diagnose und des nur unzureichenden Ansprechens des Tumors auf Chemotherapie und Bestrahlung ist die Prognose sehr schlecht. Die präklinische Entwicklung und Testungen neuer Wirkstoffe ist aufgrund eines Mangels an geeigneten in vivo und in vitro Modellen für die biomedizinische Forschung schwierig. Das Ziel der vorliegenden Arbeit war der Aufbau eines 3D Gewebemodells, das die physiologischen Wachstumsverhältnisse und die Tumormikroumgebung des MPM wiedergibt und das als mögliches präklinisches Testmodell eingesetzt werden kann.
Methoden:
Zwei etablierte Zelllinien des MPM, JL-1 und MSTO-211H, wurden auf in Zellkronen eingespannten Segmenten aus azellulärem porzinen Jejunum unter statischen Kulturbedingungen und unter kontinuierlicher Perfusion in einem Bioreaktorsystem kultiviert. Die 3D Gewebemodelle wurden mit 2D Kulturmodellen des Pleuramesothelioms verglichen. Aus OP-Präparaten wurden tumor-assoziierte Fibroblasten (TAF) isoliert, die zum Aufbau von Kokulturmodellen verwendet wurden. Die Modelle wurden histologisch und immunhistologisch charakterisiert (Calretinin etc.).
Ergebnisse:
Die beiden verwendeten Zelllinien bildeten in der statischen Kultur ein mehrschichtiges Gewebe auf der apikalen Oberfläche der Matrix. Im Vergleich mit der 2D Kultur war ein homogeneres Wachstumsmuster der Zellen und eine erniedrigte Proliferationsrate zu beobachten. Die unter dynamischen Bedingungen kultivierten Modelle zeigten deutlich mehr Tumorzellmasse auf der Matrix. Aus Gewebebiopsien eines malignen Pleuramesothelioms von Patienten wurden TAF isoliert und damit 3D Kokulturmodelle aufgebaut. In den Kokulturmodellen migrierten die TAF in die Matrix, während die Tumorzellen weiterhin auf der apikalen Seite wuchsen.
Diskussion
Durch die Kombination mit einem Bioreaktorsystem, das eine bessere Nährstoffversorgung und die Erzeugung von Scherstress ermöglicht, wird das Tumorzellwachstum positiv beeinflusst. Das Wachstum primärer Zellen auf und deren Migration in die Matrix zeigt das Potential für den Aufbau patienten-spezifischer Modelle auf. Die generierten Gewebemodelle stellen eine Grundlage für gewebespezifische Weiterentwicklungen der Modelle für tumorspezifische mechanistische und letztlich auch therapeutische Fragestellungen dar.
Malignant melanoma (MM) is the most dangerous type of skin cancer with rising incidences worldwide. Melanoma skin models can help to elucidate its causes and formation or to develop new treatment strategies. However, most of the current skin models lack a vasculature, limiting their functionality and applicability. MM relies on the vascular system for its own supply and for its dissemination to distant body sites via lymphatic and blood vessels. Thus, to accurately study MM progression, a functional vasculature is indispensable. To date, there are no vascularized skin models to study melanoma metastasis in vitro, which is why such studies still rely on animal experimentation.
In the present thesis, two different approaches for the vascularization of skin models are employed with the aim to establish a vascularized 3D in vitro full-thickness skin equivalent (FTSE) that can serve as a test system for the investigation of the progression of MM.
Initially, endothelial cells were incorporated in the dermal part of FTSEs. The optimal seeding density, a spheroid conformation of the cells and the cell culture medium were tested. A high cell density resulted in the formation of lumen-forming shapes distributed in the dermal part of the model. These capillary-like structures were proven to be of endothelial origin by staining for the endothelial cell marker CD31. The established vascularized FTSE (vFTSE) was characterized histologically after 4 weeks of culture, revealing an architecture similar to human skin in vivo with a stratified epidermis, separated from the dermal equivalent by a basement membrane indicated by collagen type IV. However, this random capillary-like network is not functional as it cannot be perfused.
Therefore, the second vascularization approach focused on the generation of a perfusable tissue construct. A channel was molded within a collagen hydrogel and seeded with endothelial cells to mimic a central, perfusable vessel. The generation and the perfusion culture of the collagen hydrogel was enabled by the use of two custom-made, 3D printed bioreactors. Histological assessment of the hydrogels revealed the lining of the channel with a monolayer of endothelial cells, expressing the cell specific marker CD31.
For the investigation of MM progression in vitro, a 3D melanoma skin equivalent was established. Melanoma cells were incorporated in the epidermal part of FTSEs, representing the native microenvironment of the tumor. Melanoma nests grew at the dermo-epidermal junction within the well stratified epidermis and were characterized by the expression of common melanoma markers. First experiments were conducted showing the feasibility of combining the melanoma model with the vFTSE, resulting in skin models with tumors at the dermo-epidermal junction and lumen-like structures in the dermis.
Taken together, the models presented in this thesis provide further steps towards the establishment of a vascularized, perfusable melanoma model to study melanoma progression and metastasis.
Mit jährlich circa 11 Millionen Fällen weltweit, stellen schwere Brandwunden bis heute einen großen Anteil an Verletzungen dar, die in Kliniken behandelt werden müssen. Während leichte Verbrennungen meist problemlos heilen, bedarf die Behandlung tieferer Verbrennungen medizinischer Intervention. Zellbasierte Therapeutika zeigen hier bereits große Erfolge, aufgrund der eingeschränkten Übertragbarkeit von Ergebnissen aus Tiermodellen ist jedoch sowohl die Testung neuer Produkte, als auch die Erforschung der Wundheilung bei Brandwunden noch immer schwierig.
Aufgrund dessen wurden in dieser Arbeit zwei Ziele verfolgt: Die Etablierung von Methoden, um ein zellbasiertes Therapeutikum produzieren zu können und die Entwicklung eines Modells zur Untersuchung von Verbrennungswunden. Zunächst wurden hierfür die Kulturbedingungen und -protokolle zur Isolation und Expansion von Keratinozyten so angepasst, dass sie gängigen Regularien zur Produktion medizinischer Produkte entsprechen. Hier zeigten die Zellen auch in anschließenden Analysen, dass charakteristische Merkmale nicht verloren hatten. Darüber hinaus gelang es, die Zellen mithilfe verschiedener protektiver Substanzen erfolgreich einzufrieren und zu konservieren.
Des Weiteren konnte ein Modell etabliert werden, das eine Verbrennung ersten Grades widerspiegelt. Über einen Zeitraum von zwei Wochen wurde seine Regeneration hinsichtlich verschiedener Aspekte, wie der Histomorphologie, dem Metabolismus und der Reepithelialisierungsrate, untersucht. Die Modelle zeigten hier viele Parallelen zur Wundheilung in vivo auf. Um die Eignung der Modelle zur Testung von Wirkstoffen zu ermitteln wurde außerdem eine Behandlung mit 5% Dexpanthenol getestet. Sie resultierte in einer verbesserten Histomorphologie und einer erhöhten Anzahl an proliferativen Zellen in den Modellen, beschleunigte jedoch die Reepithelialisierung nicht. Zusammengefasst konnten in dieser Arbeit zunächst Methoden etabliert werden, um ein medizinisches Produkt aus Keratinozyten herzustellen und zu charakterisieren. Außerdem wurde ein Modell entwickelt, anhand dessen die Wundheilung und Behandlung von Verbrennungen ersten Grades untersucht werden kann und welches als Basis zur Entwicklung von Modellen von tieferen Verbrennungen dienen kann.
Bei der zystischen Fibrose (CF) sowie der primären Ziliendyskinesie (PCD) handelt es sich um zwei seltene Erkrankungen, die unter anderem den mukoziliären Transport beeinträchtigen. CF gehört hierbei zu den am häufigsten vorkommenden angeborenen Stoffwechselerkrankungen, wobei Betroffene unter einem Defekt des Cystic Fibrosis Transmembrane Conductor Regulator (CFTR)-Gens leiden, der durch die Produktion von hochviskosem Sekret in muzinproduzierenden Organen, wie dem gastrointestinalen Trakt und der Lunge, gekennzeichnet ist. Patienten, die an PCD leiden, weisen Defekte in, zum jetzigen Zeitpunkt, ca. 38 bekannten und PCD-assoziierten Genen auf, die in strukturellen Defekten des ziliären Apparats und somit in dysfunktionalen Kinozilien resultieren. Da aktuell weder für die CF noch für die PCD eine Heilung möglich ist, steht bei der Therapie vor allem die Linderung der Symptome im Fokus. Grundlegendes Ziel ist der langfristige Erhalt der Lungenfunktion sowie die Prävention bakterieller Infekte. Als bisherige Modellsysteme zur Erforschung möglicher Therapeutika gelten Tiermodelle, die den humanen Phänotyp aufgrund von Speziesdiversität nicht vollständig abbilden können. Als vielversprechende Testsysteme für die zystische Fibrose gelten humane intestinale Organoidkulturen. Nachdem allerdings vorwiegend respiratorische Symptome für die Mortalität der Patienten verantwortlich sind, stellen CF-Atemwegsmodelle bessere Testsysteme für zukünftige Therapeutika dar. Atmungsorganoidkulturen wurden verwendet, um die CFTR-Funktionalität zu untersuchen, repräsentieren aber nicht vollständig die in vivo Situation. Deshalb werden zur Entwicklung neuer Therapiestrategien patientenspezifische 3D in vitro Testsysteme der humanen Atemwege benötigt, die insbesondere im Hinblick auf personalisierte Medizin ihren Einsatz finden. In der vorliegenden Arbeit wurde eine für den Lehrstuhl neue Methode zur Zellgewinnung aus nasalen Schleimhautabstrichen etabliert, die eine standardisierte Versorgung mit humanem Primärmaterial garantiert. Zur Generierung einer krankheitsspezifischen Zelllinie, wie beispielsweise einer PCD-Zelllinie mit Hilfe des CRISPR/Cas9-Systems, ist eine Atemwegszelllinie erforderlich, die die in vivo Situation vollständig repräsentiert. So wurden vier verschiedene respiratorische Epithelzelllinien (HBEC3-KT, Calu-3, VA10 und Cl-huAEC) auf ihren mukoziliären Phänotyp hin untersucht, wobei lediglich die Zelllinie HBEC3-KT in zilientragende Zellen differenzierte. Diese zeigten jedoch nur auf ca. 5 % der Modelloberfläche Kinozilien, wodurch die humane respiratorische Mukosa nicht komplett abgebildet werden konnte und die HBEC3-KT-Zelllinie keine geeignete Zelllinie zur Generierung einer PCD-Zelllinie darstellte. Mit Hilfe des Tissue Engineering war es möglich, 3D in vitro Testsysteme basierend auf zwei unterschiedlichen Matrices, der biologischen SIS (small intestinal submucosa) und der synthetischen Polyethylenterephthalat (PET)-Membran, aufzubauen. Es wurden 3D Atemwegstestsysteme mit humanen primären nasalen und tracheobronchialen Epithelzellen generiert. Ergänzend zu histologischen Untersuchungen und zur Charakterisierung spezifischer Marker des respiratorischen Systems mittels Immunfluoreszenz, wurde die Ultrastruktur der Modelle, mit speziellem Fokus auf ziliäre Strukturen, analysiert. Um Rückschlüsse auf die ziliäre Funktionalität ziehen zu können und somit eine hohe in vivo Korrelation zu bestätigen, wurde im Rahmen dieser Arbeit am Lehrstuhl für Tissue Engineering und Regenerative Medizin die Methode der Hochgeschwindigkeitsvideomikroskopie etabliert, welche die Analyse der Zilienschlagfrequenz sowie des mukoziliären Transports ermöglicht. Ebenfalls wurde der Einfluss von isotoner Kochsalzlösung und des � 2-adrenergen Agonisten Salbutamol, das vor allem als Bronchodilatator bei Asthmapatienten eingesetzt wird, auf die Zilienschlagfrequenz analysiert. Es konnte gezeigt werden, dass beide Substanzen den Zilienschlag im Atemwegsmodell erhöhen. Zur Generierung der Testsysteme der beiden seltenen Erkrankungen CF und PCD wurden Epithelzellen der betroffenen Patienten zunächst mittels nicht-invasiver Raman-Spektroskopie auf einen potentiellen Biomarker untersucht, welcher Einsatz in der Diagnostik der beiden Krankheiten finden könnte. Es konnte jedoch weder für die CF noch für die PCD ein Biomarker aufgedeckt werden. Jedoch zeigten PCD-Zellen eine geringe Auftrennung gegenüber nicht-PCD Zellen. Anschließend wurden 3D-Atemwegstestsysteme basierend auf Patientenzellen aufgebaut. Der Phänotyp der CF-Modelle wurde mittels immunhistologischer Färbung und der Analyse des gestörten mukoziliären Transports verifiziert. Strukturelle ziliäre Defekte konnten durch die ultrastrukturelle Analyse von Zilienquerschnitten in drei donorspezifischen PCD-Modellen identifiziert werden. Darüber hinaus konnte die ziliäre Funktionalität mit Hilfe der Hochgeschwindigkeitsvideomikroskopie nicht nachgewiesen werden. Zusammenfassend ist es in dieser Arbeit gelungen, eine neue Methode zur vollständigen Charakterisierung von 3D-Atemwegstestsystemen zu etablieren, die die Analyse der Zilienschlagfrequenz sowie des mukoziliären Transports ermöglicht. Es konnte erstmalig gezeigt werden, dass mit Hilfe des Tissue Engineering ein personalisiertes Krankheitsmodell für die PCD auf Segmenten eines dezellularisierten porzinen Jejunums generiert werden kann, das zukünftig ein Testsystem für potentielle Therapeutika darstellen kann.
Die Stammzellforschung beschäftigt sich bereits seit Jahren mit der Frage, wie Gewebe oder sogar Organe im Labor hergestellt werden können. Als besonders vielversprechend erscheinen hierfür humane Mesenchymale Stammzellen (hMSC), da diese in vielen Fällen direkt vom Empfänger gewonnen werden können und so keine Organ- oder Gewebeabstoßung durch Abwehrreaktionen zu erwarten ist. Für die weitere Erforschung des Verhaltens von Stammzellen in vivo ist es notwendig, diese nicht-invasiv darstellen zu können. Dies ist zum Beispiel mittels Magnetischer Partikel Bildgebung (MPI) möglich. Hierfür müssen die Stammzellen mit einer geeigneten Substanz markiert werden. Eine solche sind beispielsweise superparamagnetische Eisenoxidnanopartikel (SPION). Derzeit gibt es keine von den medizinischen Zulassungsbehörden zugelassenen SPION die ohne TA in hMSC aufgenommen werden. In der hier vorliegenden Arbeit sollte also im Rahmen des
EU-weiten „IDEA-Projekts“ ein geeigneter SPION identifiziert werden, der eine optimale Zell-Partikel-Interaktion aufweist und sowohl mittels MPI als auch mit Raman-Spektroskopie nachweisbar ist. Zudem sollte die Nachweisbarkeit des SPION über einen längeren Zeitraum gegeben und kein Einfluss auf die hMSC feststellbar sein. Es wurden hMSC mit den Eisenoxidnanopartikeln M4E, M4F, M4F2 und M3A-PDL in unterschiedlichen Konzentrationen markiert. Für M3A-PDL und M4E erfolgten bei einer Konzentration von 0,5 mg/ml Untersuchungen in Zellkultur sowie auf SIS-ser als Matrix im 3D-Modell. Desweiteren wurde das Differenzierungsverhalten der mit M4E markierten hMSC bei chondrogener Differenzierung untersucht. Außerdem kamen Magnetische Partikel Spektroskopie (MPS) und Raman-Spektroskopie als nicht-invasive Nachweisverfahren zum Einsatz. Der SPION-Nachweis erfolgte histologisch mittels Berliner Blau Färbung. Untersuchungen zu Zellviabilität und Proliferation erfolgten durch Trypanblau sowie Ki67-Antikörper-Färbung. Um Nachzuweisen ob auch markierte Zellen proliferieren wurde eigens ein kombiniertes Färbeprotokoll zur Kombination von Berliner Blau und immunhistochemischer Färbung
etabliert. Der Erfolg der chrondrogenen Differenzierung wurde mittels Alcianblau, Aggrecan- und Kollagen-II-Antikörper Färbung überprüft. Es konnte gezeigt werden, dass M4E bei der Markierung von hMSC eine sehr gute Zell-Partikel-Interaktion aufweist und im Gegensatz zu M3A auch ohne TA in die Zellen aufgenommen wird. Durch beide Partikel werden Zellviabilität und Proliferation nicht beeinflusst. M4F sowie M4F2 ist zur Markierung nicht geeignet. Die Markierung ließ sich im 3D-Modell mit vier Wochen deutlich länger nachweisen als in 2D Zellkultur mit maximal zwei Wochen. Die chondrogene Differenzierung wird durch die Markierung mit 0,5 mg/ml M4E beeinflusst. M3A-PDL sind durch MPS nachweisbar. Die Raman-Spektroskopie eignet sich zur Differenzierung zwischen mit M3A-PDL markierten und unmarkierten hMSC. Es ist im Rahmen dieser Arbeit gelungen, einen
Eisenoxidnanopartikel mit hervorragender Zell-Partikel-Interaktion zu identifizieren, der ohne zusätzliches TA eine intensive Markierung der hMSC ermöglicht und mit MPS nachweisbar ist. Für M4E konnte in weiteren Arbeiten am Institut bereits gezeigt werden, dass auch eine Differenzierung zwischen markierten und unmarkierten Zellen mittels Raman-Spektroskopie möglich ist. Die chondrogene Differenzierung der hMSC wurde in der vorliegenden Arbeit allerdings beeinträchtigt. In der Literatur finden sich Hinweise auf eine dosisabhängige Inhibition der Differenzierung. Es sind daher weitere Versuche notwendig, um herauszufinden, ob die Inhibition der Differenzierung möglicherweise bei geringerer SPION-Konzentration weniger ausgeprägt ist. Zudem sollte untersucht werden, ob auch geringere Konzentrationen in den Zellen über mehrere Wochen mittels MPS nachweisbar bleiben. Desweiteren sollten Untersuchungen in, der in vivo Situation ähnlicheren,
Systemen, wie dem dynamischen Umfeld einer BioVaSc-TERM® durchgeführt werden um bessere Vorhersagen zum Verhalten markierter hMSC in vivo treffen zu können.
Critical size bone defects and nonunion fractures remain difficult to treat. Although cell‐loaded bone substitutes have improved bone ingrowth and formation, the lack of methods for achieving viability and the uniform distribution of cells in the scaffold limits their use as bone grafts. In addition, the predominant mechanical stimulus that drives early osteogenic cell maturation has not been clearly identified. Further, it is challenging to evaluate mechanical stimuli (i.e., deformation and fluid–flow-induced shear stress) because they are interdependent. This thesis compares different mechanical stimuli applied to cell-seeded scaffolds to develop bone grafts efficiently for the treatment of critical size bone defects. It also seeks to understand how deformation strain and interstitial fluid–flow-induced shear stress promote osteogenic lineage commitment. In this thesis, different scaffolds were seeded with primary human bone marrow mesenchymal stem cells (BM-MSCs) from different donors and subjected to static and dynamic culture conditions. In contrast with the static culture conditions, homogenous cell distributions were accomplished under dynamic culture conditions. Additionally, the induction of osteogenic lineage commitment without the addition of soluble factors was observed in the bioreactor system after one week of cell culture. To determine the role of mechanical stimuli, a bioreactor was developed to apply mechanical deformation force to a mesenchymal stem sell (MSC) line (telomerase reverse transcriptase (TERT)) expressing a strain-responsive AP-1 luciferase reporter construct on porous scaffolds. Increased luciferase expression was observed in the deformation strain compared with the shear stress strain. Furthermore, the expression of osteogenic lineage commitment markers such as osteonectin, osteocalcin (OC), osteopontin, runt-related transcription factor 2 (RUNX2), alkaline phosphate (AP), and collagen type 1 was significantly downregulated in the shear stress strain compared with the deformation strain. These findings establish that the deformation strain was the predominant stimulus causing skeletal precursors to undergo osteogenesis in earlier stages of osteogenic cell maturation. Finally, these findings were used to develop a bioreactor in vitro test system in which the effect of medication on osteoporosis could be tested. Primary human BM-MSCs from osteoporotic donors were subjected to strontium ranelate (an osteoporotic drug marketed as Protelos®). Increased expression of collagen type 1 and calcification was seen in the drugtreated osteoporotic stem cells compared with the nondrug-treated osteoporotic stem cells. Thus, this bioreactor technology can easily be adapted into an in vitro osteoporotic drug testing system.
Aufgrund der sich umkehrenden Alterspyramide in Deutschland leiden bereits jetzt immer mehr Menschen an Gelenkknorpelschäden. Doch nicht nur das Alter, sondern auch Unfälle und Sportverletzungen und Übergewicht können zu irreversiblen Knorpeldefekten führen. Obwohl es diverse Behandlungsmöglichkeiten gibt, können die bisherige Methoden nicht als dauerhafte Heilung betrachtet werden. Im Rahmen des internationalen Forschungsprojektes BIO-CHIP sollte eine vielsprechende Behandlungsmethode mit neuartigen Arzneimitteln untersucht werden.
Als Ausgangsmaterial des Arzneimittels, ein hergestelltes Knorpelimplantat, dienen patienteneigene Knorpelzellen aus der Nase. Diese werden isoliert, vermehrt und letztlich auf einer Matrix zu einem Knorpelimplantat kultiviert. Wesentliche Voraussetzung für die Implantatfreigabe stellt neben toxikologischen und biologischen Unbedenklichkeitstests die Beurteilung der Viabilität dar. Diese wurde bisher anhand von Histologieschnitten von der Pathologie durchgeführt.
Ziel der vorliegenden Arbeit war die Entwicklung und Validierung eines standardisierten und objektiven Viabilitätstests für die Chondrozyten innerhalb der Knorpelmatrix. Hierfür wurde die LDH als Marker für irreversibel geschädigte Zellen verwendet. Die LDH Konzentration konnte mit dem CyQuant LDH-Assay durch die Messung der Absorption gemessen werden. Es konnte nachgewiesen werden, dass LDH die erforderliche Stabilität und Nachweisbarkeit im Medium besitzt. Mithilfe der Lyse, analog zum Herstellungsprozess, gezüchteter Mini-Knorpelimplantate, konnten die maximal erreichbaren LDH Konzentrationen ermittelt werden. Mithilfe dieser Konzentrationen wurde eine Eichkurve generiert. Diese dient als Beurteilung der Viabilität zukünftig gemessener Absorptionen des Überstandmediums.
Das entwickelte Verfahren erfordert keine invasiven Eingriffe am Implantat und zeichnet sich durch eine einfache Durchführung aus, da nur der Überstand gemessen werden muss. Die durchgeführte Validierung der Methode bescheinigte eine hohe Robustheit, Linearität, Genauigkeit und Präzision.
Gegenstand dieser Arbeit war die Etablierung eines dreidimensionalen in vitro Tumormodells, welches ein orales in vivo Plattenepithelkarzinom nachbilden sollte. Dabei standen Aufbau, Reproduzierbarkeit und Reliabilität an vorderster Stelle. Als Zellquelle sollten sowohl Tumorzellen aus den Zelllinien FaDu, HLaC79 und HLaC79 Clone 1 als auch primäre Zellen aus karzinogenem Primärgewebe dienen. Als Referenz wurden dabei stets Modelle aus primär isolierten Zellen herangezogen, die ein Äquivalent zur gesunden Mundschleimhaut bildeten. Während der Isolationsvorgang von pathologischen Zellen primärer Plattenepithelkarzinomen aus der Mundhöhle und dem Pharynx aufgrund zahlreicher Kontaminationen und Stagnationen des Zellwachstums keinen Erfolg erzielte und der Versuch eingestellt wurde, war es mit den Tumorzelllinien FaDu und HLaC79 möglich, dreidimensionale in vitro Tumormodelle herzustellen. Ihre Malignität wurde durch die besonderen histologischen Architekturstörungen wie die geringere Epitheldicke, das Fehlen einer Parakeratinisierung im Stratum corneum und die Invasion von Tumorzellen in die Submukosa verdeutlicht. Um einen eindeutigen Vergleich zu den Mukosaäquivalenten zu ziehen, fand eine Immunhistochemie mit unterschiedlichen Markern statt, die vor allem den gestörten Epithelaufbau des Tumormodells verdeutlichte. Als Maß für die Zell-Zell-Kontakte, die im Laufe der Kultivierung entstanden, diente der transepitheliale elektrische Widerstand. Die Behandlung der Tumorzellen und Tumormodelle mit dem klinisch bewährten Zytostatikum Paclitaxel und dem neuen Polyether-Antibiotikum Salinomycin erzielte vor allem in der zweidimensionalen Kultivierung große Erfolge. Hier wurde verdeutlicht, dass Paclitaxel toxisch auf die HLaC79 Tumorzellen wirkt, während die paclitaxelresistenten HLaC79 Clone 1 Tumorzellen immun gegen dieses Medikament sind. Salinomycin hingegen sorgte für eine Verringerung der Zellviabilität bei beiden Zelllinien. Die histologischen Untersuchungen nach der 24-stündigen Medikamentenapplikation mit Paclitaxel bei den Tumormodellen zeigten keine signifikanten Unterschiede, während der transepitheliale elektrische Widerstand stieg und auf eine verstärkte Barriere nach Paclitaxelgabe schließen ließ.
Da in den letzten Jahrzehnten nur geringfügige Verbesserungen der Überlebensraten bei an einem Pankreaskarzinom erkrankten Patienten erzielt wurden, besteht ein dringender klinischer Bedarf für die Entwicklung wirksamer therapeutischer Strategien. Dreidimensionale in vitro Modelle sind für das Screening und die Validierung von Therapeutika essenziell.
In der vorliegenden Arbeit konnte mittels der Methoden des Tissue Engineerings ein biolumineszenzbasiertes dreidimensionales in vitro Testsystem des pankreatischen Karzinoms aufgebaut und charakterisiert werden. Für die Detektion von LumineszenzIntensitäten wurde die pankreatische Krebszelllinie PANC-1 zuvor mit firefly luciferase (FLUC) transduziert. PANC-1 FLUC Zellen wurden auf porziner Pankreasmatrix (PanMa) und Dünndarmmatrix (SISser) kultiviert, um den Einfluss unterschiedlicher Matrizen auf das Verhalten der Zellen im Tumormodell zu untersuchen. Darüber hinaus wurden in dieser Arbeit die PANC-1 FLUC mit einem Standardtherapeutikum der Pankreaskarzinomtherapie, Gemcitabin, behandelt und die Wirkung mittels biolumineszenbasierter Bildgebung detektiert.
Es konnte gezeigt werden, dass die Lumineszenz-Intensität von PANC-1 FLUC Zellen einer bestimmten Zellzahl durch biolumineszenzbasierte Messverfahren zugeordnet werden kann. Weiter wurde nachgewiesen, dass die Extrazellulärmatrix einen Einfluss auf die Expression tumorspezifischer Marker hat und PANC-1 FLUC Zellen ein unterschiedlich invasives Wachstum auf organspezifischen Matrizen aufweisen. Die Wirkung von Gemcitabin auf die Tumorzellen kann durch das hier vorgestellte biolumineszenzbasierte Messverfahren detektiert werden. Die in dieser Arbeit vorgestellten Ergebnisse sind die Grundlage für die weitere Validierung eines biolumineszenzbasierten dreidimemsionalen in vitro Testystems des pankreatischen Karzinoms für die präklinische Erforschung neuartiger Therapiestrategien.
Bevor ein zellbasiertes GTMP erstmalig beim Menschen angewendet werden kann, müssen verschiedene notwendige nicht-klinische Studien durchgeführt werden. Wichtig ist hier u.a. die Untersuchung der Biodistribution im Tiermodel. Diese umfasst die Verteilung, das Engraftment, die Persistenz, die Eliminierung und gegebenenfalls die Expansion der humanen Zellen in verschiedenen Organen, meistens im Mausmodel. Deshalb wurde eine qPCR-basierte Analysenmethode entwickelt, mit der humane genomische DNA innerhalb von muriner genomischer DNA bestimmt werden kann, und entsprechend den regulatorischen Richtlinien der European Medicines Agency und des International Council for Harmonisation validiert. Anschließend wurde diese Methode innerhalb einer präklinischen worst-case Szenario Biodistributionsstudie angewendet. Das Ziel dieser Studie war die Untersuchung des Biodistributionsprofils von genetisch modifizierten Blood Outgrowth Endothelial Cells von Hämophilie A Patienten 24 Stunden und sieben Tage nach intravenöser Applikation einer Dosis von 2x106 Zellen. Die Isolation, genetische Modifikation und die Expansion der Zellen sollte entsprechend den Richtlinien der Guten Herstellungspraxis durchgeführt werden. Hierbei ist die Auswahl und Anwendung geeigneter und essentieller Rohstoffe wichtig. Gleichermaßen ist die Durchführung einer definierten Qualitätskontrollstrategie notwendig und die Patientenzellen sollten nur innerhalb von nicht-klinischen Studien eingesetzt werden, wenn alle Akzeptanzkriterien erfüllt wurden. Die Validierung der qPCR-Methode zeigte eine hohe Genauigkeit, Präzision und Linearität innerhalb des Konzentrationsintervalls von 1:1x103 bis 1:1x106 humanen zu murinen Genomen. Bei Anwendung dieser Methode für die Biodistributionsstudie konnten nach 24 Stunden humane Genome in vier der acht untersuchten Mausorgane bestimmt werden. Nach sieben Tagen konnten in keinem der acht Organe humane Genome nachgewiesen werden...
Bisherige per Tissue Engineering hergestellte Testsysteme der Mundschleimhaut basieren in der Regel auf allogenen und teils dysplastischen Keratinozyten. Dies schmälert die Aussagekraft der gewonnenen Ergebnisse hinsichtlich des Anspruchs, Nativgewebe bestmöglich nachzubilden.
In der vorliegenden Arbeit sollte daher ein am Lehrstuhl für Tissue Engineering und Regenerative Medizin entwickeltes Protokoll zur Herstellung dreidimensionaler epidermaler Oralmukosaäquivalente auf Basis autologer Keratinozyten auf seine Eigenschaften und Einsatzmöglichkeit als in-vitro Testsystem untersucht werden.
Nach erfolgreicher Isolierung und Kultivierung im Monolayer konnten insgesamt 420 Modelle zu drei verschiedenen Zeitpunkten (Passagen) aufgebaut werden. Die Untersuchung von Histologie, Viabilität und Barrierefunktion mittels MTT, TEER und Natriumfluoresceinpermeabilität konnte einen suffizienten Aufbau von verhorntem, mehrschichtigen oralen Plattenepithel nachweisen. Gleichzeitig konnte eine Abnahme der Epithelqualität mit steigendem Keratinozytenalter festgestellt werden.
Eine sich anschließende Untersuchung von 14 Cytokeratinen sowie Apoptosemarkern per effizienzkorrigierter und normalisierter RT-qPCR konnte die Überlegenheit der dreidimensionalen autologen Oralmukosaäquivalente gegenüber der zweidimensionalen Monolayerkultur auf Genebene zeigen.
Als die häufigste tödliche Tumorerkrankung weltweit ist das Lungenkarzinom mit einer sehr schlechten Prognose verbunden. Eine Behandlungsoption für Lungenadenokarzinome, die eine aktivierende EGFR-Mutation aufweisen, ist der orale EGFR-TKI Gefitinib (Iressa®, ZD1839). Die Resistenzentwicklung von Tumoren gegen diese Therapie stellt ein großes klinisches Problem dar.
Das Ziel dieser Arbeit war es, die Dosis-Wirkungs-Beziehung von Gefitinib, sowie die Entwicklung von Resistenzen in einem etablierten humanen 3D Lungentumormodell zu untersuchen und dieses Testsystem für eben diese Fragestellungen zu validieren.
Vorliegende Arbeit bestätigt, dass pharmakologische Untersuchungen in Zellkulturen häufig zu einer Überschätzung des Behandlungserfolges führen. Das verwendete Modell entspricht mehr den in vivo Bedingungen. In dieser Arbeit wurden zwei ATP-Zellvitalitätsassays für die statischen 3D Lungentumormodelle etabliert und erfolgreich angewendet. Dabei zeigte sich eine konzentrationsabhängige Wirkung von Gefitinib auf das Wachstum, die Proliferation, die Apoptose, die Markerexpression sowie die Signalwegsaktivierungen. Im statischen 3D Lungentumormodell lag der IC50-Wert zwischen 0,05-0,1 µM Gefitinib welches den Werten aus klinischen Beobachtungen entspricht. Auch der in der Klinik bereits nach wenigen Stunden eintretende zeitliche Effekt von Gefitinib konnte in unserem Modell bestätigt werden. Eine dynamische Kultivierung der Lungentumorzellen, mit von Scherkräften verursachtem schnellerem Zellwachstum, führte zu einer weiteren Annährung an die klinischen Gegebenheiten. Das Netzwerk der Gefitinib-Wirkung auf die EGFR-Signalkaskade wurde in unserem Modell charakterisiert.
Die Betrachtung einer resistenten Zell-Subpopulation zeigte einen Resistenzmechanismus über eine Epitheliale-Mesenchymale-Transition. Zusätzlich wurde versucht, eine neue medikamenten-resistente Zell-Subpopulation zu generieren.
Das beschriebene 3D Lungentumormodell ermöglicht richtungsweisende Untersuchungen zu Dosis-Wirkungs-Beziehung von Gefitinib. Ansätze für eine weitere Optimierung des Modells wurden herausgearbeitet.
Induction of ectopic bone formation by site directed immobilized BMP2 variants \(in\) \(vivo\)
(2020)
In contrast to common bone fractures, critical size bone defects are unable to self-regenerate and therefore external sources for bone replacement are needed. Currently, the gold standard to treat critical size bone fractures, resulting from diseases, trauma or surgical interventions, is the use of autologous bone transplantation that is associated with several drawbacks such as postoperative pain, increased loss of blood during surgery and extended operative time.
The field of bone tissue engineering focuses on the combination of biomaterials and growth factors to circumvent these adverse events and thereby to improve critical size bone defects treatment.
To this aim, a promising approach is represented by using a collagen sponge soaked with one of the most powerful osteoinductive proteins, the bone morphogenetic protein 2 (BMP2). After the approval by the Food and Drug Administration (FDA), BMP2 was used to successfully treat several severe bone defects. However, the use of BMP2 delivery systems is associated with severe side effects such as inflammation, swelling, ectopic bone formation outside of the site of implantation and breathing problems if implanted in the area of the cervical spine. The occurrence of severe side effects is related to the supraphysiological amounts of the applied protein at the implantation site. The BMP2 is typically adsorbed into the scaffold and diffuses rapidly after implantation. Therefore, intensive research has been conducted to improve the protein’s retention ability, since a prolonged entrapment of the BMP2 at the implantation site would induce superior bone formation in vivo due to a minimized protein release. By controlling the release from newly designed materials or changing the protein immobilization methods, it seems possible to improve the osteoinductive properties of the resulting BMP2-functionalized scaffolds.
The combination of biocompatible and biodegradable scaffolds functionalized with a covalently immobilized protein such as BMP2 would constitute a new alternative in bone tissue engineering by eliminating the aforementioned severe side effects. One of the most common immobilization techniques is represented by the so-called EDC/NHS chemistry. This coupling technique allows covalent biding of the growth factor but in a non-site direct manner, thus producing an implant with uncontrollable and unpredictable osteogenic activities. Therefore, the generation of BMP2 variants harboring functional groups that allow a site-directed immobilization to the scaffold, would enable the production of implants with reproducible osteogenic activity.
The new BMP2 variants harbor an artificial amino acid at a specific position of the mature polypeptide sequence. The presence of the unnatural amino acid allows to use particular covalent immobilization techniques in a highly specific and site directed manner. The two selected BMP2 variants, BMP2 E83Plk and BMP2 E83Azide, were expressed in E. coli, renatured and purified by cation exchange chromatography. The final products were intensively analyzed in terms of purity and biological activity in vitro. The two BMP2 variants enabled the application of different coupling techniques and verify the possible options for site directed immobilization to the scaffold.
Intensive analyses on the possible side effects caused by the coupling reactions and on the quantification of the coupled protein were performed. Both click chemistry reactions showed high reaction efficacies when the BMP2 variants were coupled to functionalized fluorophores. Quantification by ELISA and scintillation counting of radioactively labeled protein revealed different outcomes. Moreover, the amounts of protein detected for the BMP2 variants coupled to microspheres were similar to that of the wild type protein. Therefore, it was not possible to conclude whether the BMP2 variants were covalently coupled or just adsorbed.
BMP2 variants being immobilized to various microspheres induced osteogenic differentiation of C2C12 cells in vitro, but only in those cells that were located in close proximity to the functionalized beads. This selectivity strongly indicates that the protein is for a great portion covalently coupled and not just adsorbed. Moreover, the difference between the covalently coupled BMP2 variants and the adsorbed BMP2 WT was confirmed in vivo. Injection of the BMP2-functionalized microspheres in a rat model induced subcutaneous bone formation.
The main aim of the animal experiment was to prove whether covalently coupled BMP2 induces bone formation at significant lower doses if compared to the amount being required if the protein is simply adsorbed. To this aim, several BMP2 concentrations were tested in this animal experiment. The BMP2 variants, being covalently immobilized, were hypothesized to be retained and therefore bio-available at the site of implantation for a prolonged time. However, in the animal experiments, lower doses of either coupled or adsorbed protein were unable to induce any bone formation within the 12 weeks.
In contrast, the highest doses induced bone formation that was first detected at week 4. During the 12 weeks of the experiment, an increase in bone density and a steady state bone volume was observed. These results were obtained only for the covalently coupled BMP2 E83Azide but not for BMP2 E83Plk that did not induce bone formation in any condition. The negative outcome after application of BMP2 E83Plk suggested that the coupling reaction might have provoked changes in the protein structure that extremely influenced its osteogenic capabilities in vivo.
However, the histological examination of the different ossicles induced either by BMP2 WT or BMP2 E83Azide, revealed clear morphological differences. BMP2 WT induced a bone shell-like structure, while the covalently coupled protein induced uniform bone formation also throughout the inner part. The differences between the two newly formed bones can be clearly associated with the different protein delivery mechanisms. Thus, the developed functionalized microspheres constitute a new interesting strategy that needs further investigations in order to be able to be used as replacement of the currently used BMP2 WT loaded medical devices.
Despite advancements of modern medicine, the number of patients with the the end-stage kidney disease keeps growing, and surgical procedures to establish and maintain a vascular access for hemodialysis are rising accordingly. Surgical access of choice remains autogenous arteriovenous fistula, whereas approach “fistula first at all costs” leads to failure in certain subgroups of patients. Modern synthetic vascular grafts fail to deliver long-term results comparable with AV fistula. With all that in mind, this work has an aim of developing a new alternative vascular graft, which can be used for hemodialysis access using the methods of TE, especially electrospinning technique. It is hypothesized that electrospun scaffold, made of PCL and collagen type I may assemble mechanical properties similar to native blood vessels. Seeding such electrospun scaffolds with human microvascular endothelial cells (hmvECs) and preconditioning with shear stress and continuous flow might achieve sufficient endothelial lining being able to resist acute thrombosis. One further topic considered on-site infections, which represents one of the most spread complications of dialysis therapy due to continuous needle punctures. The main hypothesis was that during electrospinning process, polymers can be blended with antibiotics with the aim of producing scaffolds with antimicrobial properties, which could lead to reducing the risk of on-site infection on one side, while not affecting the cell viability.
Trotz hochmoderner Technologien und ausgefeilter therapeutischer und rekonstruktiver chirurgischer Heilungsmethoden beträgt die 5-Jahres Überlebensrate bei der Diagnose PECA der Mundhöhle im Durchschnitt auch im Jahre 2017 nur 55 % und die Heilungsmethoden haben sich in den letzten drei Jahrzehnten kaum verbessert. Umso wichtiger ist es deshalb, die Forschung voranzutreiben und ein aussagekräftiges Tumormodell zu etablieren, das bei der Entwicklung neuer Therapieansätze schnell und sicher gute Ergebnisse liefert.
In dieser Studie soll mit Hilfe des Tissue Engineering (TE) ein in gesunder Mundschleimhaut (MSH) integriertes 3D-Tumormodell generiert werden, welches bestmöglich die Analyse pathologischer Mechanismen im Tumorzentrum, sowie im Randbereich von gesundem und erkranktem Gewebe, und auch die Analyse der Auswirkungen neuartiger Chemotherapeutika auf gesunde und maligne Zellen in direkter Nachbarschaft ermöglicht – ohne Tierversuche. In der Konsequenz könnte ein erheblicher Fortschritt mit höheren Erfolgsaussichten der Therapieansätze erzielt werden.
Es wird ein Tumormodell generiert, in dem auf Basis eines gesunden MSH-Modells Tumorzellen eingebracht werden, um - genauso, wie die Tumorentstehung in vivo von statten gehen würde – Tumorentstehung und Tumorwachstum in der Umgebung von gesunder MSH analysieren zu können. Das Modell basiert dabei auf einer Matrix aus dezellularisierter, porciner, small-intestinal-submucosa (SIS/MUC), die mit primären Fibroblasten, primären Keratinozyten und Tumorzellen der Tumorzelllinie FaDu besiedelt wird. Eine Besonderheit der FaDu-Zellen ist die vorangegangene Transduktion mit dem Lentivirus RFP – um die eingewanderten Zellen von gesunden Zellen unterscheiden zu können. Der Vorgang der Transduktion war gelungen und es konnte eine Fluoreszenz der noch in Zellkulturschalen kultivierten Zellen erzielt werden. Allerdings waren die fluoreszierenden Zellen in den fixierten Schnitten nicht mehr nachweisbar.
Zur Generierung eines Tumormodelles wurden auf Basis eines OMÄ drei unterschiedliche Applikationsformen zur Integration von Tumorzellen getestet. Die Integration von Tumorzellen fand in Form von Spots, Sphäroiden oder Tumorzellgemischen (prim. Keratinozyten/FaDu-Zellen) in zuvor kultivierte gesunde OMÄ statt. Dabei sollte das Applizieren von Spots oder Sphäroiden das Tumorzellwachstum auch in der Umgebung von gesundem Gewebe initiieren. Dies würde die Möglichkeit schaffen, auch in vitro, gesundes neben pathologischem Gewebe und den Übergang dazu genau analysieren zu können.
Es sollen sowohl die optimale Konzentration der Tumorzellen, welche für die Entstehung von Tumoren nötig ist, als auch die geeignetste Applikationsmethode eruiert werden, um optimale Tumormodelle zuverlässig reproduzierbar ansetzen zu können. Die Modelle wurden histologisch und immunhistochemisch analysiert und die Ergebnisse mit ermittelten TEER-Werte in Korrelation gesetzt.
In dieser Arbeit konnte mit der Applikation von Spots oder Sphäroiden kein suffizientes Tumorwachstum in Umgebung von gesunder MSH erzielt werden. Die Zellen lagen ohne Reaktion des angrenzenden Stratum corneums auf der zu stark ausgeprägten Hornschicht der OMÄ auf und es war keine Einwanderung in das darunterliegende Gewebe möglich.
Allerdings ist es gelungen, durch Applikation eines Zellgemisches variierender Mischungsverhältnisse von primären Keratinozyten und Tumorzellen der Zelllinie FaDu ein 3D-Tumorwachstum unterschiedlicher Malignitätsstufen zu initiieren. Je kleiner das Mischungsverhältnis und je höher in der Konsequenz die Anzahl der FaDu-Tumorzellen, desto ausgeprägter waren die morphologischen Anzeichen einer Tumorbildung. Abhängig vom Mischungsverhältnis war dabei die Ausprägung des Tumors. Auch wenn dadurch keine Kombination von gesundem und pathologischem Gewebe in einem Modell mehr imitiert werden konnte, so konnten zumindest nach histologischen und immunhistochemischen Untersuchungen eindeutige pathologische, maligne Tumormodelle generiert werden. Die Tumormodelle zeigten durchgehend Zell- und Kernpleomorphismen, atypische und vermehrte suprabasale Mitosen, eine Störung der normalen Gewebearchitektur, die Ausbildung von Interzellularbrücken, Einzelzelldyskeratosen und Verhornungsknospen, sowie Stellen der Durchbrechung der Basalmembran und Invasion von Tumorzellen in die darunterliegende Lamina propria. All das sind eindeutige Kennzeichen malignen Wachstums
Auch die Ergebnisse der TEER-Wert Messung stimmten mit den morphologischen Entwicklungen der Modelle überein. So stiegen die TEER-Werte der Kontrollmodelle konsequent an, was für eine deutliche Entwicklung von kontinuierlichem Gewebe spricht und im Gegensatz dazu fielen die TEER-Werte im zeitlichen Verlauf der Tumormodelle, bei denen die Basalmembran und somit die Kontinuität des Gewebes durchbrochen wurde rapide ab, bzw. lagen im konstant niedrigen Bereich.
Der Erfolg der Etablierung dieses zuverlässig rekonstruierbaren 3D, in vitro generierten Tumormodells, das der in vivo Situation eines Plattenepithelkarzinoms sehr nahekommt, bietet der Wissenschaft eine sehr gute Möglichkeit, weitere Studien zum Tumorwachstum durchzuführen. Außerdem kann die Weiterentwicklung und Verbesserung vielversprechender, neuartiger chemotherapeutischer und radiologischer Therapieverfahren erheblich voran¬getrieben und dadurch die Heilungschancen mit geringeren Nebenwirkungen für den Patienten verbessert und eine erhöhte Lebensqualität erzielt werden.
Ziel der vorliegenden Arbeit war es, die Biokompatibilität von Kollagen I-basierten ACL-Konstrukten in-vitro und in-vivo zu überprüfen. Zudem erfolgte eine histologische Charakterisierung der Konstrukte nach sechswöchiger bzw. sechsmonatiger Versuchslaufzeit im Minipig-Tiermodell.
Das Kollagen I wurde durch eine neuartige Methode aus Rattenschwänzen isoliert und zu einem Implantat geknotet und gewickelt. Die Fasern wurden mittels Proliferationsmessung, Proteinbestimmung, Zellzählung und Zellmorphologie auf in-vitro-Biokompatibilität getestet. Hier zeigte sich eine gute Biokompatibilität sowohl für γ-sterilisierte Fasern als auch für nicht sterilisierte Fasern. In der Sterilitätsüberprüfung waren nach Anpassung des Sterilisationsverfahrens weder Bakterien- noch Pilzwachstum nachweisbar. Diese Ergebnisse sind vergleichbar mit vielfältigen Studien zur Biokompatibilität von Kollagen, in denen jeweils gute Zellviabilität und –proliferation im direkten oder indirekten Kontakt mit Kollagen gezeigt werden konnte.
Anschließend wurde das Konstrukt im Tierversuch direkt im Kniegelenk als vorderer Kreuzbandersatz implantiert. Nach Ablauf der Standzeit und Explantation der Kniegelenke wurden Paraffinschnittpräparate der Implantate sowie Paraffinschnittpräparate und Kunststoffschnittpräparate der ossa femora angefertigt und durchlichtmikroskopisch deskriptiv ausgewertet. Zusätzlich wurden die immunhistochemischen Färbungen Kollagen I des Schweins und der Ratte und Faktor VIII angefertigt, wobei in der Faktor VIII-Färbung zusätzlich eine quantitative Auswertung der Gefäßzahl vorgenommen wurde. Es wurde in der Kollagenfärbung ein Ersatz des Rattenkollagens durch das Schweinekollagen einhergehend mit einer hohen Zellzahl gezeigt. Eine synoviale Deckschicht und eine fortschreitende Vaskularisierung, sowie Form und Anordnung der Zellen zeigten Vorgänge des Remodeling. Innerhalb von 6 Monaten nahm die Vaskularisierung zu und neu gebildeter Geflechtknochen verengte die Bohrkanäle. Die Knochen-Implantat-Heilung war im Bohrkanal durch Sharpey´sche Fasern gekennzeichnet. Am Tunnelausgang fanden sich von sechs Wochen zu sechs Monaten Hinweise auf die fortschreitende Entwicklung einer direkten Bandinsertion.
Diese Ergebnisse entsprechen weitgehend den in der Literatur beschriebenen Remodelingvorgängen bei Studien zum Thema Kreuzbandersatz. Die beginnende direkte Bandinsertion spricht für eine gute Fixation und die Einheilung begünstigende Eigenschaften des Implantates. Dies ist ein geeigneter Ansatz für weitere Untersuchungen. Von Seiten der Biokompatibilität und der Integration des Gewebes ist das Implantat zum Kreuzbandersatz geeignet. Es bleibt abzuwarten, inwieweit die erforderlichen mechanischen Eigenschaften erreicht werden können.
Development and proof of concept of a biological vascularized cell‐based drug delivery system
(2019)
A major therapeutic challenge is the increasing incidence of chronic disorders.
The persistent impairment or loss of tissue function requires constitutive on‐demand
drug availability optimally achieved by a drug delivery system ideally directly connected
to the blood circulation of the patient. However, despite the efforts and achievements in
cell‐based therapies and the generation of complex and customized cell‐specific
microenvironments, the generation of functional tissue is still unaccomplished.
This study demonstrates the capability to generate a vascularized platform technology to
potentially overcome the supply restraints for graft development and clinical application
with immediate anastomosis to the blood circulation.
The ability to decellularize segments of the rat intestine while preserving the ECM for
subsequent reendothelialization was proven. The reestablishment of a functional
arteriovenous perfusion circuit enabled the supply of co‐cultured cells capable to replace
the function of damaged tissue or to serve as a drug delivery system. During in vitro
studies, the applicability of the developed miniaturized biological vascularized scaffold
(mBioVaSc‐TERM®) was demonstrated. While indicating promising results in short term
in vivo studies, long term implantations revealed current limitations for the translation
into clinical application. The gained insights will impact further improvements of quality
and performance of this promising platform technology for future regenerative therapies.
The skeletal system forms the mechanical structure of the body and consists of bone, which is hard connective tissue. The tasks the skeleton and bones take over are of mechanical, metabolic and synthetic nature. Lastly, bones enable the production of blood cells by housing the bone marrow. Bone has a scarless self-healing capacity to a certain degree. Injuries exceeding this capacity caused by trauma, surgical removal of infected or tumoral bone or as a result from treatment-related osteonecrosis, will not heal. Critical size bone defects that will not heal by themselves are still object of comprehensive clinical investigation. The conventional treatments often result in therapies including burdening methods as for example the harvesting of autologous bone material. The aim of this thesis was the creation of a prevascularized bone implant employing minimally invasive methods in order to minimize inconvenience for patients and surgical site morbidity. The basis for the implant was a decellularized, naturally derived vascular scaffold (BioVaSc-TERM®) providing functional vessel structures after reseeding with autologous endothelial cells. The bone compartment was built by the combination of the aforementioned scaffold with synthetic β-tricalcium phosphate. In vitro culture for tissue maturation was performed using bioreactor technology before the testing of the regenerative potential of the implant in large animal experiments in sheep. A tibia defect was treated without the anastomosis of the implant’s innate vasculature to the host’s circulatory system and in a second study, with anastomosis of the vessel system in a mandibular defect. While the non-anastomosed implant revealed a mostly osteoconductive effect, the implants that were anastomosed achieved formation of bony islands evenly distributed over the defect.
In order to prepare preconditions for a rapid approval of an implant making use of this vascularization strategy, the manufacturing of the BioVaSc-TERM® as vascularizing scaffold was adjusted to GMP requirements.
Der myokardiale Ischämie-Reperfusions-Schaden (IR) hat eine hohe Relevanz in der Kardiologie und Herzchirurgie. Trotz intensiver Forschung ist es bislang nicht gelungen, eine
effektive Therapie des IR in den klinischen Alltag zu implementieren.
Mitochondrien spielen im IR eine wichtige Rolle. Die Raman-Spektroskopie mit Laserquellen von 785 nm Wellenlänge erlaubt die nicht-invasive Analyse pathophysiologischer Prozesse in vitro in Echtzeit. Daher eignet sich die Raman-spektroskopische Analyse von Mitochondrien möglicherweise dazu, notwendige neue Einblicke in die Pathophysiologie des myokardialen IR zu gewinnen.
Die vorliegende Arbeit analysierte die mitochondriale Funktion von subsarkolemmalen Mitochondrien im IR mit Hilfe bekannter Methoden. Anschließend erfolgte ein Vergleich der etablierten Methode „Clark-Elektrode“ mit der neu etablierten Raman-Spektroskopie zur Analyse der mitochondrialen Funktion im IR.
Cancer remains after cardiovascular diseases the leading cause of death worldwide and an estimated 8.2 million people died of it in 2012. By 2030, 13 million cancer deaths are expected due to the growth and ageing of the population. Hereof, colorectal cancer (CRC) is the third most common cancer in men and the second in women with a wide geographical variation across the world. Usually, CRC begins as a non-cancerous growth leading to an adenomatous polyp, or adenoma, arising from glandular cells. Since research has brought about better understanding of the mechanisms of cancer development, novel treatments such as targeted therapy have emerged in the past decades. Despite that, up to 95% of anticancer drugs tested in clinical phase I trials do not attain a market authorisation and hence these high attrition rates remain a key challenge for the pharmaceutical industry, making drug development processes enormously costly and inefficient. Therefore, new preclinical in vitro models which can predict drug responses in vivo more precisely are urgently needed. Tissue engineering not only provides the possibility of creating artificial three-dimensional (3D) in vitro tissues, such as functional organs, but also enables the investigation of drug responses in pathological tissue models, that is, in 3D cancer models which are superior to conventional two-dimensional (2D) cell cultures on petri dishes and can overcome the limitations of animal models, thereby reducing the need for preclinical in vivo models. In this thesis, novel 3D CRC models on the basis of a decellularised intestinal matrix were established. In the first part, it could be shown that the cell line SW480 exhibited different characteristics when grown in a 3D environment from those in conventional 2D culture. While the cells showed a mesenchymal phenotype in 2D culture, they displayed a more pronounced epithelial character in the 3D model. By adding stromal cells (fibroblasts), the cancer cells changed their growth pattern and built tumour-like structures together with the fibroblasts, thereby remodelling the natural mucosal structures of the scaffold. Additionally, the established 3D tumour model was used as a test system for treatment with standard chemotherapeutic 5-fluorouracil (5-FU). The second part of the thesis focused on the establishment of a 3D in vitro test system for targeted therapy. The US Food and Drug Administration has already approved of a number of drugs for targeted therapy of specific types of cancer. For instance, the small molecule vemurafenib (PLX4032, Zelboraf™) which demonstrated impressive response rates of 50–80% in melanoma patients with a mutation of the rapidly accelerated fibrosarcoma oncogene type B (BRAF) kinase which belongs to the mitogen active protein kinase (MAPK) signalling pathway. However, only 5% of CRC patients harbouring the same BRAF mutation respond to treatment with vemurafenib. An explanation for this unresponsiveness could be a feedback activation of the upstream EGFR, reactivating the MAPK pathway which sustains a proliferative signalling. To test this hypothesis, the two early passage cell lines HROC24 and HROC87, both presenting the mutation BRAF V600E but differing in other mutations, were used and their drug response to vemurafenib and/or gefitinib was assessed in conventional 2D cell culture and compared to the more advanced 3D model. Under 3D culture conditions, both cell lines showed a reduction of the proliferation rate only in the combination therapy approach. Furthermore, no significant differences between the various treatment approaches and the untreated control regarding apoptosis rate and viability for both cell lines could be found in the 3D tumour model which conferred an enhanced chemoresistance to the cancer cells. Because of the observed unresponsiveness to BRAF inhibition by vemurafenib as can be seen in the clinic for patients with BRAF mutations in CRC, the cell line HROC87 was used for further xenografting experiments and analysis of activation changes in the MAPK signalling pathway. It could be shown that the cells presented a reactivation of Akt in the 3D model when treated with both inhibitors, suggesting an escape mechanism for apoptosis which was not present in cells cultured under conventional 2D conditions. Moreover, the cells exhibited an activation of the hepatocyte growth factor receptor (HGFR, c-Met) in 2D and 3D culture, but this was not detectable in the xenograft model. This shows the limitations of in vivo models. The results suggest another feedback activation loop than that to the EGFR which might not primarily be involved in the resistance mechanism. This reflects the before mentioned high attrition rates in the preclinical drug testing.
Die Risikobewertung von Chemikalien ist für die öffentliche Gesundheit von entschei-dender Bedeutung, weshalb strenge Testverfahren zu deren toxikologischer Begutach-tung angewandt werden. Die ursprünglich tierbasierten Testverfahren werden aufgrund von neuen wissenschaftlichen Erkenntnissen und wegen ökonomischer Ineffizienz sowie ethischer Fragwürdigkeit immer mehr durch alternative Methoden ohne Tiermodelle ersetzt. Für den toxikologischen Endpunkt der Augenreizung wurden bereits die ersten alternativen Testsysteme auf der Basis von ex vivo- oder in vitro-Modellen entwickelt. Jedoch ist bis dato kein alternatives Testsystem in der Lage, das gesamte Spektrum der verschiedenen Kategorien der Augenreizungen nach dem global harmonisierten System zur Einstufung und Kennzeichnung von Chemikalien (GHS) vorherzusagen und damit den tierbasierten Draize-Augenreizungstest vollends zu ersetzen. Gründe hierfür sind fehlende physiologische Merkmale im Modell sowie eine destruktive Analysemethode.
Aufgrund dessen wurden in dieser Studie die Hypothesen getestet, ob ein verbessertes In-vitro-Modell oder eine zerstörungsfreie, hochsensitive Analysemethode die Vorher-sagekraft des Augenreizungstests verbessern können. Dafür wurden zunächst neue Mo-delle aus humanen Hornhaut- und Hautepithelzellen entwickelt. Die Modelle aus pri-mären cornealen Zellen zeigten eine gewebespezifische Expression der Marker Zytokera-tin 3 und 12 sowie Loricrin. In beiden Modellen konnte durch die Verkürzung der Kul-turdauer die Ausbildung einer Hornschicht verhindert werden. Die Modelle wiesen dadurch eine sensiblere Barriere vergleichbar der nativen Cornea auf. Darüber hinaus konnte durch die chemische Quervernetzung mit Polyethylenglykolsuccinimidylglutara-tester ein transparentes, nicht kontrahierendes Stroma-Äquivalent etabliert werden. Der Stroma-Ersatz konnte zur Generierung von Hemi- und Voll-Cornea-Äquivalenten einge-setzt werden und lieferte somit erste Ansatzpunkte für die Rekonstruktion der nativen Hornhaut.
Parallel dazu konnte ein zerstörungsfreies Analyseverfahren basierend auf der Impe-danzspektroskopie entwickelt werden, das wiederholte Messungen der Gewebeintegri-tät zulässt. Zur verbesserten Messung der Barriere in dreidimensionalen Modelle wurde hierfür ein neuer Parameter, der transepitheliale elektrische Widerstand (TEER) bei der Frequenz von 1000 Hz, der TEER1000 Hz definiert, der eine genauere Aussage über die Integrität der Modelle zulässt. Durch die Kombination der entwickelten cornealen Epithelzellmodelle mit der TEER1000 Hz-Messung konnte die Prädikitivität des Augenrei-zungstests auf 78 - 100 % erhöht werden. Von besonderer Bedeutung ist dabei, dass die nicht destruktive Messung des TEER1000 Hz zum ersten Mal erlaubte, die Persistenz von Irritationen durch wiederholte Messungen in einem in vitro-Modell zu erkennen und somit die GHS-Kategorie 1 von GHS-Kategorie 2 zu unterscheiden. Der wissenschaftli-che Gewinn dieser Forschungsarbeit ist ein neues Testverfahren, das alle GHS-Kategorien in einem einzigen in vitro-Test nachweisen und den Draize-Augenreizungstest gänzlich ersetzen kann.
Die Implantation eines Medizinprodukts in den menschlichen Körper ruft eine Immunreaktion hervor, die zur fibrösen Einkapselung führen kann. Makrophagen in direktem Kontakt mit der Oberfläche des Implantats erfassen sensorisch den Fremdkörper und übersetzten das Signal in die Freisetzung zahlreicher löslicher Mediatoren. Das generierte Entzündungsmilieu moduliert die Heilungsreaktion und kann zur Anreicherung von Fibroblasten sowie zur Erhöhung der Matrixsyntheserate in der Wundumgebung führen. Eine dichte fibröse Kapsel um ein Medizinprodukt beeinträchtigt den Ersatz von Körperstrukturen, das Unterstützen physiologischer Körperfunktionen sowie die Effizienz einer medizinischen Therapie. Zur Identifizierung potenzieller Biomaterialkandidaten mit optimalen Eigenschaften ist jedoch eine evidenzbasierte Entscheidungsfindung notwendig und diese wiederum muss durch geeignete Testmethoden unterstützt werden.
Zur Erfassung lokaler Effekte nach Implantation eines Biomaterials begründet die Komplexi-tät der ablaufenden Fremdkörperreaktion die Anwendung von Tiermodellen als Goldstandard. Die Eingliederung von in vitro Modellsystemen in standardisierte Testverfahren scheitert oft an der Verfügbarkeit validierter, verlässlicher und reproduzierbarer Methoden. Demnach ist kein standardisiertes in vitro Testverfahren beschrieben, das die komplexen dreidimensionalen Gewebsstrukturen während einer Fremdkörperreaktion abbildet und sich zur Testung über längere Kontaktphasen zwischen Blutkomponenten und Biomaterialien eignet. Jedoch können in vitro Testungen kosten- und zeiteffizienter sein und durch die Anwendung humaner Zellen eine höhere Übertragbarkeit auf den Menschen aufweisen. Zusätzlich adressiert die Präferenz zu in vitro Testmethoden den Aspekt „Reduzierung“ der 3R-Prinzipien „Replacement, Reduction, Refinement“ (Ersatz, Reduzierung, Verbesserung) von Russel und Burch (1959) zu einer bewussten und begründeten Anwendung von Tiermodellen in der Wissenschaft. Ziel von diesem Forschungsvorhaben war die Entwicklung von humanen in vitro Modellsystemen, die den Kontakt zu Blutkomponenten sowie die Reaktion des umliegenden Bindegewebes bei lokaler Implantation eines Biomaterials abbilden. Referenzmaterialien, deren Gewebsantwort nach Implantation in Tiere oder den Menschen bekannt ist, dienten als Validierungskriterium für die entwickelten Modellsysteme. Die Anreicherung von Zellen sowie die Bildung extrazellulärer Matrix in der Wundumgebung stellen wichtige Teilprozesse während einer Fremdkörperreaktion dar. Für beide Teilprozesse konnte in einem indirekten zellbasierten Modellsystem der Einfluss einer zellvermittelten Konditionierung wie die Freisetzung von löslichen Mediatoren durch materialadhärente Makrophagen auf die gerichtete Wanderung von Fibroblasten sowie den Umbau eines dreidimensionalen Bindegewebsmodells aufgezeigt werden.
Des Weiteren ließ sich das Freisetzungsprofil von Zytokinen durch materialständige Makrophagen unter verschiedenen Testbedingungen wie der Kontamination mit LPS, der Oberflächenbehandlung mit humanem Blutplasma und der Gegenwart von IL-4 bestimmen. Die anschließende vergleichende statistische Modellierung der generierten komplexen multifaktoriellen Datenmatrix ermöglichte die Übersetzung in eine Biomaterialbewertung. Dieses entwickelte Testverfahren eignete sich einerseits zur Validierung von in vitro Testbedingungen sowie andererseits zur Bewertung von Biomaterialien. Darüber hinaus konnte in einem dreidimensionalen Fremdkörpermodell die komplexe dreidimensionale Struktur der extrazellulären Matrix in einer Wunde durch die Kombination unterschiedlicher Zell- und Matrixkomponenten biomimetisch nachgebaut werden. Diese neuartigen dreidimensionalen Fremdkörpermodelle ermöglichten die Testung von Biomaterialien über längere Testphasen und können in anschließenden Studien angewandt werden, um dynamische Prozesse zu untersuchen. Zusammenfassend konnten in dieser Arbeit drei unterschiedliche Teststrategien entwickelt werden, die (I) die Bewertung von Teilprozessen ermöglichen, (II) die Identifizierung verlässlicher Testbedingungen unterstützen und (III) biomimetisch ein Wundgewebe abbilden. Wesentlich ist, dass biomimetisch ein dreidimensionales Gewebemodell entwickelt werden konnte, das eine verlässliche Unterscheidungskapazität zwischen Biomaterialien aufweist.
Herzschrittmachersysteme sind eine weitverbreitete Möglichkeit Herz-Kreislauf-Erkrankungen zu behandeln. Wegen der natürlichen Reaktion des Immunsystems auf Fremdkörper, erfolgt aber eine fortschreitende Verkapselung der Herzschrittmacherelektrode. Die Folge ist eine ansteigende Verminderung der Stimulationseffizienz durch Erhöhung der Anregungsschwelle. Die Integration der Elektrode in das Gewebe ist dabei mangelhaft und wird bestimmt durch Implantateigenschaften wie Größe, Flexibilität und Dimensionalität. Um die Integration zu verbessern, stellen dreidimensionale (3D) bzw. gewebeartige Elektroden eine Alternative zu den derzeit verwendeten planaren Metallelektroden dar. Zur Entwicklung einer leitfähigen, 3D und faserförmigen Elektrode wurden in dieser Arbeit Kohlenstoff-Nanofaser-Scaffolds über Elektrospinnen hergestellt. Durch die Modifikation des Fasergerüstes mit Natriumchlorid (NaCl) während der Scaffoldherstellung, konnte das Fasernetzwerk aufgelockert und Poren generiert werden. Die Kohlenstofffaser-Elektroden zeigten einen effizienten Energieübertrag, welcher vergleichbar mit heutigen Titannitrid (TiN) -Elektroden ist. Die Auflockerung des Fasergewebes hatte eine verbesserte Flexibilität des Faserscaffolds zu Folge. Neben der Flexibilität, konnte auch die Infiltration von Zellen in das poröse Faserscaffold erheblich verbessert werden. Dabei konnten Fibroblasten durch das gesamte Scaffold migrieren. Die Kompatibilität mit kardialen Zellen, die Grundvoraussetzung von Herzschrittmacherelektroden, wurde in vitro nachgewiesen. Durch die Kombination aus dem 3D-Elektrodengerüst mit einer Co-Kultur aus humanen Kardiomyozyten, mesenchymalen Stammzellen und Fibroblasten, erfolgte eine Einbettung der Elektrode in funktionelles kardiales Gewebe. Dadurch konnte ein lebender Gewebe-Elektroden-Hybrid generiert werden, welcher möglicherweise die Elektrode vor Immunzellen in vivo abschirmen kann. Eine Zusammenführung der hybriden Elektrode mit einen Tissue-Engineerten humanen kardialen Patch in vitro, führte zu Bildung einer nahtlosen Elektronik-Gewebe-Schnittstelle. Die fusionierte Einheit wurde abschließend auf ihre mechanische Belastbarkeit getestet und konnte über einen Elektroden-Anschluss elektrisch stimuliert werden.
Cardiovascular diseases are considered the leading cause of death worldwide according to the World Health Organization. Heart failure is the last stage of most of these diseases, where loss of myocardium leads to architectural and functional decline.
The definitive treatment option for patients with CVDs is organ or tissue transplantation, which relies on donor availability. Therefore, generating an autologous bioengineered myocardium or heart could overcome this limitation. In addition, generating cardiac patches will provide ventricular wall support and enable reparative stem cells delivery to damaged areas. Although many hurdles still exist, a good number of researches have attempted to create an engineered cardiac tissue which can induce endogenous cardiac repair by replacing damaged myocardium.
The present study provided cardiac patches in two models, one by a detergent coronary perfusion decellularization protocol that was optimized, and the other that resulted in a 3D cell-free extracellular matrix with intact architecture and preserved s-glycosaminoglycan and vasculature conduits. Perfusion with 1% Sodium dodecyle sulfate (SDS) under constant pressure resulted in cell-free porcine scaffold within two and cell-free rat scaffold in 7 days, whereas scaffold perfused with 4% sodium deoxycholate (SDO) was not able to remove cells completely. Re-reendothelialization of tissue vasculature was obtained by injecting human microvascular endothelial cell and human fibroblast in 2:1 ratio in a dynamic culture. One-week later, CD31 positive cells and endothelium markers were observed, indicating new blood lining. Moreover, functionality test of re-endothelialized tissue revealed improvement in clotting seen in decellularized tissues. When the tissue was ready to be repopulated, porcine induced pluripotent stem cells (PiPSc) were generated by transfected reprogramming of porcine skin fibroblast and then differentiated to cardiac cells following a robust protocol, for an autologous cardiac tissue model. However, due to the limitation in the PiPSc cell number, alternatively, human induced pluripotent stem cells generated cardiac cells were used.
For reseeding a coculture of human iPSc generated cardiac cells, human mesenchymal stem cells and human fibroblast in 2:1:1 ratio respectively were used in a dynamic culture for 6-8 weeks. Contractions at different areas of the tissue were recorded at an average beating rate of 67 beats/min. In addition, positive cardiac markers (Troponin T), Fibroblast (vemintin), and mesenchymal stem cells (CD90) were detected. Not only that, but by week 3, MSC started differentiating to cardiac cells progressively until few CD90 positive cells were very few by week 6 with increasing troponin t positive cells in parallel. Electrophysiological and drug studies were difficult to obtain due to tissue thickness and limited assessment sources. However, the same construct was established using small intestine submucosa (SISer) scaffold, which recorded a spontaneous beating rate between 0.88 and 1.2 Hz, a conduction velocity of 23.9 ± 0.74 cm s−1, and a maximal contraction force of 0.453 ± 0.015 mN. Moreover, electrophysiological studies demonstrated a drug-dependent response on beating rate; a higher adrenalin frequency was revealed in comparison to the untreated tissue and isoproterenol administration, whereas a decrease in beating rate was observed with propranolol and untreated tissue.
The present study demonstrated the establishment of vascularized cardiac tissue, which can be used for human clinical application.
Breast cancer is the most common cancer among women worldwide and the second most common cause of cancer death in the developed countries. As the current state of the art in first-line drug screenings is highly ineffective, there is an urgent need for novel test systems that allow for reliable predictions of drug sensitivity.
In this study, a tissue engineering approach was used to successfully establish and standardize a 3-dimensional (3D) mamma carcinoma test system that was optimized for the testing of anti-tumour therapies as well as for the investigation of tumour biological issues. This 3D test system is based on the decellularised scaffold of a porcine small intestinal segment and represents the three molecular subsets of oestrogen receptor-positive, HER2/Neu-overexpressing and triple negative breast cancer (TNBC). The characterization of the test system with respect to morphology as well as the expression of markers for epithelial-mesenchymal transition (EMT) and differentiation indicate that the 3D tumour models cultured under static and dynamic conditions reflect tumour relevant features and have a good correlation with in vivo tumour tissue from the corresponding xenograft models. In this respect, the dynamic culture in a flow bioreactor resulted in the generation of tumour models that exhibited best reflection of the morphology of the xenograft material. Furthermore, the proliferation indices of 3D models were significantly reduced compared to 2-dimensional (2D) cell culture and therefore better reflect the in vivo situation. As this more physiological proliferation index prevents an overestimation of the therapeutic effect of cytostatic compounds, this is a crucial advantage of the test system compared to 2D culture. Moreover, it could be shown that the 3D models can recapitulate different tumour stages with respect to tumour cell invasion. The scaffold SISmuc with the preserved basement membrane structure allowed the investigation of invasion over this barrier which tumour cells of epithelial origin have to cross in in vivo conditions during the process of metastasis formation. Additionally, the data obtained from ultrastructural analysis and in situ zymography indicate that the invasion observed is connected to a tumour cell-associated change in the basement membrane in which matrix metalloproteinases (MMPs) are also involved. This features of the model in combination with the mentioned methods of analysis could be used in the future to mechanistically investigate invasive processes and to test anti-metastatic therapy strategies.
The validation of the 3D models as a test system with respect to the predictability of therapeutic effects was achieved by the clinically relevant targeted therapy with the monoclonal antibody trastuzumab which induces therapeutic response only in patients with HER2/Neu-overexpressing mamma carcinomas due to its specificity for HER2. While neither in 2D nor in 3D models of all molecular subsets a clear reduction of cell viability or an increase in apoptosis could be observed, a distinct increase in antibody-dependent cell-mediated cytotoxicity (ADCC) was detected only in the HER2/NEU-overexpressing 3D model with the help of an ADCC reporter gene assay that had been adapted for the application in the 3D model in the here presented work. This correlates with the clinical observations and underlines the relevance of ADCC as a mechanism of action (MOA) of trastuzumab. In order to measure the effects of ADCC on the tumour cells in a direct way without the indirect measurement via a reporter gene, the introduction of an immunological component into the models was required. This was achieved by the integration of peripheral blood mononuclear cells (PBMCs), thereby allowing the measurement of the induction of tumour cell apoptosis in the HER2/Neu-overexpressing model. Hence, in this study an immunocompetent model could be established that holds the potential for further testing of therapies from the emergent field of cancer immunotherapies.
Subsequently, the established test system was used for the investigation of scientific issues from different areas of application. By the comparison of the sensitivity of the 2D and 3D model of TNBC towards the water-insoluble compound curcumin that was applied in a novel nanoformulation or in a DMSO-based formulation, the 3D test system was successfully applied for the evaluation of an innovative formulation strategy for poorly soluble drugs in order to achieve cancer therapy-relevant concentrations. Moreover, due to the lack of targeted therapies for TNBC, the TNBC model was applied for testing novel treatment strategies. On the one hand, therapy with the WEE1 kinase inhibitor MK 1775 was evaluated as a single agent as well as in combination with the chemotherapeutic agent doxorubicin. This therapy approach did not reveal any distinct benefits in the 3D test system in contrast to testing in 2D culture. On the other hand, a novel therapy approach from the field of cellular immunotherapies was successfully applied in the TNBC 3D model. The treatment with T cells that express a chimeric antigen receptor (CAR) against ROR1 revealed in the static as well as in the dynamic model a migration of T cells into the tumour tissue, an enhanced proliferation of T cells as well as an efficient lysis of the tumour cells via apoptosis and therefore a specific anti-cancer effect of CAR-transduced T cells compared to control T cells. These results illustrate that the therapeutic application of CAR T cells is a promising strategy for the treatment of solid tumours like TNBC and that the here presented 3D models are suitable for the evaluation and optimization of cellular immunotherapies.
In the last part of this work, the 3D models were expanded by components of the tumour stroma for future applications. By coculture with fibroblasts, the natural structures of the intestinal scaffold comprising crypts and villi were remodelled and the tumour cells formed tumour-like structures together with the fibroblasts. This tissue model displayed a strong correlation with xenograft models with respect to morphology, marker expression as well as the activation of dermal fibroblasts towards a cancer-associated fibroblast (CAF) phenotype. For the integration of adipocytes which are an essential component of the breast stroma, a coculture with human adipose-derived stromal/stem cells (hASCs) which could be successfully differentiated along the adipose lineage in 3D static as well as dynamic models was established. These models are suitable especially for the mechanistic analysis of the reciprocal interaction between tumour cells and adipocytes due to the complex differentiation process.
Taken together, in this study a human 3D mamma carcinoma test system for application in the preclinical development and testing of anti-tumour therapies as well as in basic research in the field of tumour biology was successfully established. With the help of this modular test system, relevant data can be obtained concerning the efficacy of therapies in tumours of different molecular subsets and different tumour stages as well as for the optimization of novel therapy strategies like immunotherapies. In the future this can contribute to improve the preclinical screening and thereby to reduce the high attrition rates in pharmaceutical industry as well as the amount of animal experiments.
Entwicklungsaspekte eines Medizinproduktes zur Prävention und Überwachung von Hydrierungszuständen
(2018)
Der demografische Wandel und das Populationswachstum stellen eine globale Herausforderung für die Gesundheitssysteme dar. Eine vielversprechende Lösungsstrategie liegt in der digitalen Überwachung, Prävention und Therapie akuter und chronischer Erkrankungen durch die Nutzung von innovativen Technologien aus dem Bereich der personalisierten Medizin.
Die Digitalisierung in der Überwachung von Vitalparametern mittels Sensorik besitzt großes Potential für die längere Gesunderhaltung der Patienten und somit die Entlastung der Gesundheitssyteme im Ganzen.
Da Wassermangel für eine Vielfalt von Krankheiten einen Katalysator darstellt, ist die Hydratation ein wichtiger aber bislang nur invasiv zugänglicher Vitalparameter. Zur Etablierung nicht invasiver Messungen des Wasserhaushaltes am Menschen wurde im Rahmen dieser Arbeit die Eignung der Mikrowellentechnologie untersucht.
Dehydratation resultiert in der Veränderung des Osmolythaushaltes und beeinflusst biochemische Prozesse, was zur Entstehung von Morbidität führen kann. Im Rahmen der Arbeit werden Teilbereiche der Entwicklung eines Medizinproduktes abgebildet. Zu diesem Zweck wird die Machbarkeit der mikrowellenbasierten Analyse des Wasserhaushaltes in einer technischen Machbarkeitsstudie untersucht, um im zweiten Prozessschritt einen technischen Demonstrator in vitro und in vivo am Probanden erproben zu können. Hochfrequente elektromagnetische Wellen interagieren mit Molekülen, speziell Wasser. Enthält eine Probe freie Wassermoleküle, kann dies im reflektierten Signal detektiert werden. Zur Überprüfung des Sensorsystems in vitro dienen humane 3D-Vollhautmodelle mit spezifischer Hydratation und Gewebedichte der Matrixkomponenten als standardisiertes Modell zur Untersuchung definierter Exsikkoseszenarien und des Einflusses verschiedener Modellkomplexitäten. Die Eignungsüberprüfung des Systems mit einem technischen Demonstrator des künftigen Medizinproduktes belegt die Anwendbarkeit des Messsystems zur Erfassung des relativen Wassergehaltes. Die Technologie zeichnet sich durch eine hohe Sensitivität bei der Destinktion von Proben mittels Frequenz- und Signalreflektionsdifferenzen aus. Neben den In-vitro-Testungen wird das entwickelte Sensorsystem aus regulatorischer Sicht zur klinischen Leistungsüberprüfung vorbereitet und im Rahmen eines bewilligten Ethikvotums in vivo erprobt. Die Ergebnisse belegen die Machbarkeit der nichtinvasiven Erfassung des Wasserhaushaltes durch mikrowellenbasierte Messungen. Die Technologie birgt das Potential, in ein körpernahes Sensorsystem integriert zu werden, welches als Medizinprodukt zur persönlichen Gesundheitsüberwachung zugelassen werden kann.
The pancreas and the small intestine are pivotal organs acting in close synergism to regulate glucose metabolism. After absorption and processing of dietary glucose within the small intestine, insulin and glucagon are released from pancreatic islet cells to maintain blood glucose homeostasis. Malfunctions affecting either individual, organ-specific functions or the sophisticated interplay of both organs can result in massive complications and pathologic conditions. One of the most serious metabolic diseases of our society is diabetes mellitus (DM) that is hallmarked by a disturbance of blood glucose homeostasis. Type 1 (T1DM) and type 2 (T2DM) are the main forms of the disease and both are characterized by chronic hyperglycemia, a condition that evokes severe comorbidities in the long-term. In the past, several standard treatment options allowed a more or less adequate therapy for diabetic patients. Albeit there is much effort to develop new therapeutic interventions to treat diabetic patients in a more efficient way, no cure is available so far. In view of the urgent need for alternative treatment options, a more systemic look on whole organ systems, their biological relation and complex interplay is needed when developing new therapeutic strategies for DM.
T1DM is hallmarked by an autoimmune-mediated destruction of the pancreatic β-cell mass resulting in a complete lack of insulin that is in most patients restored by applying a life-long recombinant insulin therapy. Therefore, novel regenerative medicine-based concepts focus on the derivation of bioartificial β-like cells from diverse stem cell sources in vitro that survive and sustain to secrete insulin after implantation in vivo. In this context, the first part of this thesis analyzed multipotent intestinal stem cells (ISCs) as alternative cell source to derive bioartificial, pancreatic β-like cells in vitro. From a translational perspective, intestinal stem cells pose a particularly attractive cell source since intestinal donor tissues could be obtained via minimal invasive endoscopy in an autologous way. Furthermore, intestinal and pancreatic cells both derive from the same developmental origin, the endodermal gut tube, favoring the differentiation process towards functional β-like cells. In this study, pancreas-specific differentiation of ISCs was induced by the ectopic expression of the pancreatic transcription factor 1 alpha (Ptf1a), a pioneer transcriptional regulator of pancreatic fate. Furthermore, pancreatic lineage-specific culture media were applied to support the differentiation process. In general, ISCs grow in vitro in a 3D Matrigel®-based environment. Therefore, a 2D culture platform for ISCs was established to allow delivery and ectopic expression of Ptf1a with high efficiency. Next, several molecular tools were applied and compared with each other to identify the most suitable technology for Ptf1a delivery and expression within ISCs as well as their survival under the new established 2D conditions. Success of differentiation was investigated by monitoring changes in cellular morphology and induction of pancreatic differentiation-specific gene expression profiles. In summary, the data of this project part suggest that Ptf1a harbors the potential to induce pancreatic differentiation of ISCs when applying an adequate differentiation media. However, gene expression analysis indicated rather an acinar lineage-determination than a pancreatic β-cell-like specification. Nevertheless, this study proved ISCs not only as interesting stem cell source for the generation of pancreatic cell types with a potential use in the treatment of T1DM but alsoPtf1a as pioneer factor for pancreatic differentiation of ISCs in general.
Compared to T1DM, T2DM patients suffer from hyperglycemia due to insulin resistance. In T2DM management, the maintenance of blood glucose homeostasis has highest priority and can be achieved by drugs affecting the stabilization of blood glucose levels. Recent therapeutic concepts are aiming at the inhibition of the intestinal glucose transporter Na+-D-Glucose cotransporter 1 (SGLT1). Pharmacological inhibition of SGLT1 results in reduced postprandial blood glucose levels combined with a sustained and increased Glucagon-like peptide 1 (GLP-1) secretion. So far, systemic side effects of this medication have not been addressed in detail. Of note, besides intestinal localization, SGLT1 is also expressed in various other tissues including the pancreas. In context of having a closer look also on the interplay of organs when developing new therapeutic approaches for DM, the second part of this thesis addressed the effects on pancreatic islet integrity after loss of SGLT1. The analyses comprised the investigation of pancreatic islet size, cytomorphology and function by the use of a global SGLT1 knockout (SGLT1-/-) mouse model. As SGLT1-/- mice develop the glucose-galactose malabsorption syndrome when fed a standard laboratory chow, these animals derived a glucose-deficient, fat-enriched (GDFE) diet. Wildtype mice on either standard chow (WTSC) or GDFE (WTDC) allowed the discrimination between diet- and knockout-dependent effects. Notably, GDFE fed mice showed decreased expression and function of intestinal SGLT1, while pancreatic SGLT1 mRNA levels were unaffected. Further, the findings revealed increased isled sizes, reduced proliferation- and apoptosis rates as well as an increased α-cell and reduced β-cell proportion accompanied by a disturbed cytomorphology in islets when SGLT1 function is lost or impaired. In addition, pancreatic islets were dysfunctional in terms of insulin- and glucagon-secretion. Moreover, the release of intestinal GLP-1, an incretin hormone that stimulates insulin-secretion in the islet, was abnormal after glucose stimulatory conditions. In summary, these data show that intestinal SGLT1 expression and function is nutrient dependent. The data obtained from the islet studies revealed an additional and new role of SGLT1 for maintaining pancreatic islet integrity in the context of structural, cytomorphological and functional aspects. With special emphasis on SGLT1 inhibition in diabetic patients, the data of this project indicate an urgent need for analyzing systemic side effects in other relevant organs to prove pharmacological SGLT1 inhibition as beneficial and safe.
Altogether, the findings of both project parts of this thesis demonstrate that focusing on the molecular and cellular relationship and interplay of the small intestine and the pancreas could be of high importance in context of developing new therapeutic strategies for future applications in DM patients.
The limited intrinsic self-healing capability of articular cartilage requires treatment of
cartilage defects. Material assisted and cell based therapies are in clinical practice but
tend to result in formation of mechanical inferior fibro-cartilage in long term follow up. If
a lesion has not been properly restored degenerative diseases are diagnosed as late sequela
causing pain and loss in morbidity. Complex three dimensional tissue models mimicking
physiological situation allow investigation of cartilage metabolism and mechanisms involved
in repair. A standardized and reproducible model cultured under controllable conditions
ex vivo to maintain tissue properties is of relevance for comparable studies.
Topic of this thesis was the establishment of an cartilage defect model that allows for
testing novel biomaterials and investigate the effect of defined defect depths on formation
of repair tissue.
In part I an ex vivo osteochondral defect model was established based on isolation of
porcine osteochondral explants (OCE) from medial condyles, 8 mm in diameter and 5 mm
in height. Full thickness cartilage defects with 1 mm to 4 mm in diameter were created
to define ex vivo cartilage critical size after 28 days culture with custom developed static
culture device. In part II of this thesis hydrogel materials, namely collagen I isolated from
rat tail, commercially available fibrin glue, matrix-metalloproteinase clevable poly(ethylene
glycol) polymerized with heparin (starPEGh), methacrylated poly(N-(2-hydroxypropyl)
methacrylamide mono-dilactate-poly(ethylene glycol) triblock copolymer/methacrylated
hyaluronic acid (MP/HA), thiol functionalized HA/allyl functionalized poly(glycidol)
(P(AGE/G)-HA-SH), were tested cell free and chondrocyte loaded (20 mio/ml) as implant
in 4 mm cartilage defects to investigate cartilage regeneration. Reproducible chondral
defects, 8 mm in diameter and 1 mm in height, were generated with an artificial tissue
cutter (ARTcut®) to investigate effect of defect depth on defect regeneration in part III.
In all approaches OCE were analyzed by Safranin-O staining to visualize proteoglycans
in cartilage and/or hydrogels. Immuno-histological and -fluorescent stainings (aggrecan,
collagen II, VI and X, proCollagen I, SOX9, RUNX2), gene expression analysis (aggrecan,
collagen II and X, SOX9, RUNX2) of chondrocyte loaded hydrogels (part II) and proteoglycan
and DNA content (Part I & II) were performed for detailed analysis of cartilage
regeneration.
Part I: The development of custom made static culture device, consisting of inserts in which OCE is fixed and deep well plate, allowed tissue specific media supply without
supplementation of TGF . Critical size diameter was defined to be 4 mm.
Part II: Biomaterials revealed differences in cartilage regeneration. Collagen I and fibrin
glue showed presence of cells migrated from OCE into cell free hydrogels with indication
of fibrous tissue formation by presence of proCollagen I. In chondrocyte loaded study
cartilage matrix proteins aggrecan, collagen II and VI and transcription factor SOX9 were
detected after ex vivo culture throughout the two natural hydrogels collagen I and fibrin
glue whereas markers were localized in pericellular matrix in starPEGh. Weak stainings resulted
for MP/HA and P(AGE/G)-HA-SH in some cell clusters. Gene expression data and
proteoglycan quantification supported histological findings with tendency of hypertrophy
indicated by upregulation of collagen X and RunX2 in MP/HA and P(AGE/G)-HA-SH.
Part III: In life-dead stainings recruitment of cells from OCE into empty or cell free
collagen I treated chondral defects was seen.
Separated and tissue specific media supply is critical to maintain ECM composition in
cartilage. Presence of OCE stimulates cartilage matrix synthesis in chondrocyte loaded
collagen I hydrogel and reduces hypertrophy compared to free swelling conditions and
pellet cultures. Differences in cartilage repair tissue formation resulted in preference of
natural derived polymers compared to synthetic based materials. The ex vivo cartilage
defect model represents a platform for testing novel hydrogels as cartilage materials, but
also to investigate the effect of cell seeding densities, cell gradients, cell co-cultures on
defect regeneration dependent on defect depth. The separated media compartments allow
for systematic analysis of pharmaceutics, media components or inflammatory cytokines on
bone and cartilage metabolism and matrix stability.
In Deutschland erkranken jährlich etwa 500.000 Menschen an Krebs, wovon circa
12.000 die Diagnose „Leukämie“ gestellt bekommen [1]. Unter den Leukämien weist
die akute myeloische Leukämie (AML) die ungünstigste Prognose auf, sodass hier
erheblicher Forschungsbedarf besteht. Zusätzlich schnitten viele potentielle Therapeutika,
die sich in bisherigen präklinischen Testsystemen als vielversprechend erwiesen
haben, in klinischen Studien schlecht ab [8]. Ziel dieser Arbeit war daher die
Etablierung eines 3D in vitro Blutgefäß-/Gewebemodells als verbessertes präklinisches
System zur Testung von Therapeutika, die zur erfolgreichen Behandlung von
Leukämien beitragen sollen.
Das 3D Blutgefäßmodell bestand aus humanen primären Endothelzellen, welche
als Monolayer auf der Serosaseite einer dezellularisierten, porzinen, intestinalen Kollagenmatrix
(SIS-Ser) wuchsen. Nach 14-tägiger Zellkultur wurden dem Versuchsansatz
entsprechend nichtadhärente THP-1 Zellen (AML-M5-Zelllinie) und Tipifarnib
oder entsprechende Kontrolllösungen beziehungsweise bimolekulare Antikörperkonstrukte
mit PBMCs als Effektorzellen hinzupipettiert. Nach 5-tägiger Inkubation
mit Tipifarnib beziehungsweise 24-stündiger Behandlung mit Antikörperkonstrukten
wurde der therapiebedingte Anstieg der Apoptoserate in den malignen THP-1 Zellen
mittels durchflusszytometrischer Analyse der Modellüberstände ermittelt. Zum
Ausschluss verbliebener und durchflusszytometrisch zu analysierender Zellen wurde,
stellvertretend für alle Suspensionszellen, eine Anti-CD13/DAB-Färbung durchgeführt,
welche negativ ausfiel. Mögliche Kollateralschäden am Endothel wurden
mittels histologischen Färbemethoden an Gewebeparaffinschnitten untersucht.
In der Durchflusszytometrie zeigte Tipifarnib sowohl im 2D als auch im 3D Modell
äquivalente, dosisabhängige und antileukämische Auswirkungen auf die THP-1 Zellen.
Bei Applikation der Antikörperkonstrukte ließ lediglich die Kombination beider Hemibodies signifikante Effekte auf die THP-1 Zellen erkennen. Dabei zeigten sich
bei konstanten Konzentrationen der Antikörperkonstrukte im 3D Modell deutlich
höhere Apoptoseraten (58%) als im 2D Modell (38%). Stellt man Vergleiche von
Tipifarnib mit den T-Zell-rekrutierenden Antikörperkonstrukten an, so ließen sich
im 2D Modell ähnliche Apoptoseraten in den THP-1 Zellen erzielen (jeweils 38% bei
Anwendung von 500 nM Tipifarnib). In den 3D Modellen erzielten jedoch die niedriger
konzentrierten Antikörperkonstrukte bei kürzerer Inkubationsdauer eine noch
höhere spezifische Apoptoserate in den THP-1 Zellen (im Mittel 58%) als 500 nM
Tipifarnib (mittlere Apoptoserate 40%). Bezüglich der Nebenwirkungen ließ sich
im 3D Modell nach Applikation von Antikörperkonstrukten kein wesentlicher Einfluss
auf das Endothel erkennen, während Tipifarnib/DMSO als auch die mit DMSO
versetzten Kontrolllösungen zu einer dosisabhänigen Destruktion des ursprünglichen
Endothelzellmonolayers führten. Damit stellt die hier beschriebene, hoch spezifische,
Hemibody-vermittelte Immuntherapie einen vielversprechenden Ansatz für zukünftige
onkologische Therapien dar.
Mithilfe des etablierten humanen 3D in vitro Modells konnte im Vergleich zur
konventionellen Zellkultur eine natürlichere Mikroumgebung für Zellen geschaffen
und die Auswirkungen der Testsubstanzen sowohl auf maligne Zellen, als auch auf
die Gefäßstrukturen untersucht werden.
Site Directed Immobilization of BMP-2: Two Approaches for the Production of Osteoinductive Scaffolds
(2017)
Bone fractures typically heal without surgical intervention. However, pathological situations exist which impede the healing process resulting in so-called non-union fractures. Such fractures are nowadays treated with scaffold material being introduced into the defect area. These scaffolds can be doped with osteogenic factors, such as bone morphogenetic protein (BMP)2. BMP2 belongs to the most osteogenic growth factors known to date. Its medical use, efficiency and safety have been approved by FDA for certain applications. Currently, BMP2 is distributed with a stabilizing scaffold, which is simply soaked with the growth factor. Due to fast release kinetics supraphysiological high doses of BMP2 are required which are causally associated with severe side effects observed in certain applications being most harmful in the area of the cervical spine. These side-effects include inflammation, swelling and breathing problems, leading to disastrous consequences or secondary surgical interventions. Since it could be shown that a retardation of BMP2 release from the scaffold resulted in superior bone forming properties in vivo, it seems obvious to further reduce this release to a minimum. This can be achieved by covalent coupling which in the past was already elaborated using mainly classical EDC/NHS chemistry. Using this technique coupling of the protein occurs non-site-directedly leading mainly to an unpredictable product outcome with variable osteogenic activities. In order to improve the reproducibility of scaffold functionalization by BMP2 we created variants one of which contains a unique unnatural amino acid substitution within the mature polypeptide sequence (BMP2-K3Plk) and another, BMP2-A2C, in which an N-terminal alanine has been substituted by cysteine. These modifications enable site-specific and covalent immobilization of BMP2 e.g. onto polymeric beads. Both proteins were expressed in E. coli, renatured and purified by cation-exchange chromatography. Both variants were extensively analyzed in terms of purity and biological activity which was tested by in vitro interaction analyses as well as in cell based assays. Both proteins could be successfully coupled to polymeric beads. The different BMP2 functionalized beads were shown to interact with the ectodomain of the type I receptor BMPR-IA in vitro indicating that the biological activity of both BMP2 variants retained upon coupling. Both functionalized beads induced osteogenic differentiation C2C12 cells but only of those cells which have been in close contact to the particular beads. This strongly indicates that the BMP2 variant are indeed covalently coupled and not just adsorbed.
We claim that we have developed a system for a site-specific and covalent immobilization of BMP-2 onto solid scaffolds, potentially eliminating the necessity of high-dose scaffold loading. Since immobilized proteins are protected from removal by extracellular fluids, their activities now rely mainly on the half-life of the used scaffold and the rate of proteolytic degradation. Assuming that due to prolonged times much lower loading capacities might be required we propose that the immobilization strategy employed in this work may be further refined and optimized to replace the currently used BMP2-containing medical products.
Aktueller Goldstandard bei der Rekonstruktion des ACL des Menschen sind au-tologe Transplantate. Diese sind allerdings je nach Entnahmeort mit einer mehr oder weniger hohen Entnahmemorbidität und dem Risiko für Folgeerkrankungen verbunden. Um dies zu umgehen, wurde ein xenogenes Kollagenimplantat aus
Kollagen-I-Fasern von Ratten entwickelt und das native Konstrukt bereits in einer Vorläuferstudie getestet.
Im Rahmen dieser Arbeit wurden diese Kreuzbandkonstrukte mit Hilfe diverser
Crosslinker modifiziert und hinsichtlich ihrer Biomechanik, Biokompatibilität und ihres in-vivo Verhaltens untersucht.
Bewusst wurde dabei auf die Zellbesiedlung dieser Konstrukte verzichtet, da un-ter Berücksichtigung wirtschaftlicher Gesichtspunkte eines späteren humanen
Einsatzes hierfür eine Arzneimittelzulassung notwendig gewesen wäre. Mit Hilfe der Crosslinker wurde versucht, die mechanische Stabilität sowie die Resistenz gegen kollagenabbauende Enzyme der Synovia zu erhöhen, um die Gefahr post-operativer Instabilitäten zu verringern. Dabei sollten Fragen bezüglich Immun-antwort, Biokompatibilität sowie Biodegradierbarkeit genau berücksichtigt wer-den. Als Crosslinker wurden für einen Vergleich in vitro neben 0,5 % Genipin auch 10 % HMDI sowie Glukose und EDC/NHS herangezogen.
Dabei zeigten die Genipin-gecrosslinkten Einzelfasern die größte Reißfestigkeits-zunahme, wohingegen auf Minikonstruktbasis 10 % HMDI zu den höchsten UTS-Werten führte. Ebenso ließen sich bezüglich der Biokompatibilutät in vitro bei den Crosslinkern 0,5 % Genipin und 10 % HMDI Vorteile gegenüber den beiden an-deren erkennen.
Schließlich erfolgte im Rahmen eines Tierversuchs an 16 Minipigs der Einbau von 0,5 % Genipin-gecrosslinkten Konstrukten als Kreuzbandersatz und an-schließend die biomechanische Testung sowie nach Paraffineinbettung auch eine durchlichtmikrokopische deskriptive Auswertung der Transplantate.
Während nach 6 Wochen eine deutliche Reißfestigkeitsabnahme zu verzeichnen war, erreichte diese nach 6 Monaten wieder fast 60 % ihrer ursprünglichen UTS.
Somit konnte ein Remodeling des eingesetzten Implantats angenommen wer-den. Dies bestätigte sich in der durchgeführten histologischen Untersuchung.
Hier war das Implantat deutlich vaskularisiert, von zahlreichen Fibroblasten durchsetzt und wies eine synoviale Deckschicht auf. Allerdings scheint vor allem wegen der Schwäche der Konstrukte nach 6 Wochen sowie den vermutlich auf-grund des Crosslinkers auftretenden Reaktionserscheinungen innerhalb des
Kniegelenks ein Einsatz im humanen Bereich zum gegenwärtigen Zeitpunkt noch nicht ausgereift.
Dennoch lässt sich gerade anhand des stattfindenden Remodelings das große Potential kollagenbasierter Materialien für den Kreuzbandersatz erkennen. Eine weitere Optimierung des bestehenden Konstrukts sollte deshalb forciert werden.
The main function of the small intestine is the absorption of essential nutrients, water and vitamins. Moreover, it constitutes a barrier protecting us from toxic xenobiotics and pathogens. For a better understanding of these processes, the development of intestinal in vitro models is of great interest to the study of pharmacological and pathological issues such as transport mechanisms and barrier function. Depending on the scientific questions, models of different complexity can be applied.
In vitro Transwell® systems based on a porous PET-membrane enable the standardized study of transport mechanisms across the intestinal barrier as well as the investigation of the influence of target substances on barrier integrity. However, this artificial setup reflects only limited aspects of the physiology of the native small intestine and can pose an additional physical barrier. Hence, the applications of this model for tissue engineering are limited.
Previously, tissue models based on a biological decellularized scaffold derived from porcine gut tissue were demonstrated to be a good alternative to the commonly used Transwell® system. This study showed that preserved biological extracellular matrix components like collagen and elastin provide a natural environment for the epithelial cells, promoting cell adhesion and growth. Intestinal epithelial cells such as Caco-2 cultured on such a scaffold showed a confluent, tight monolayer on the apical surface. Additionally, myofibroblasts were able to migrate into the scaffold supporting intestinal barrier formation.
In this thesis, dendritic cells were additionally introduced to this model mimicking an important component of the immune system. This co-culture model was then successfully proven to be suitable for the screening of particle formulations developed as delivery system for cancer antigens in peroral vaccination studies. In particular, nanoparticles based on PLGA, PEG-PAGE-PLGA, Mannose-PEG-PAGE-PLGA and Chitosan were tested. Uptake studies revealed only slight differences in the transcellular transport rate among the different particles. Dendritic cells were shown to phagocytose the particles after they have passed the intestinal barrier. The particles demonstrated to be an effective carrier system to transport peptides across the intestinal barrier and therefore present a useful tool for the development of novel drugs.
Furthermore, to mimic the complex structure and physiology of the gut including the presence of multiple different cell types, the Caco-2 cell line was replaced by primary intestinal cells to set up a de novo tissue model. To that end, intestinal crypts including undifferentiated stem cells and progenitor cells were isolated from human small intestinal tissue samples (jejunum) and expanded in vitro in organoid cultures. Cells were cultured on the decellularized porcine gut matrix in co-culture with intestinal myofibroblasts. These novel tissue models were maintained under either static or dynamic conditions.
Primary intestinal epithelial cells formed a confluent monolayer including the major differentiated cell types positive for mucin (goblet cells), villin (enterocytes), chromogranin A (enteroendocrine cells) and lysozyme (paneth cells). Electron microscopy images depicted essential functional units of an intact epithelium, such as microvilli and tight junctions. FITC-dextran permeability and TEER measurements were used to assess tightness of the cell layer. Models showed characteristic transport activity for several reference substances. Mechanical stimulation of the cells by a dynamic culture system had a great impact on barrier integrity and transporter activity resulting in a tighter barrier and a higher efflux transporter activity.
In Summary, the use of primary human intestinal cells combined with a biological decellularized scaffold offers a new and promising way to setup more physiological intestinal in vitro models. Maintenance of primary intestinal stem cells with their proliferation and differentiation potential together with adjusted culture protocols might help further improve the models. In particular, dynamic culture systems and co culture models proofed to be a first crucial steps towards a more physiological model. Such tissue models might be useful to improve the predictive power of in vitro models and in vitro in vivo correlation (IVIVC) studies. Moreover, these tissue models will be useful tools in preclinical studies to test pharmaceutical substances, probiotic active organisms, human pathogenic germs and could even be used to build up patient-specific tissue model for personalized medicine.
Zusammenfassung
In der Regenerativen Medizin sind polymerbasierte Biomaterialien von großer Bedeutung für
die Entwicklung und Anwendung verbesserter bzw. neuer Therapien. Die Erforschung der
Oberflächeneigenschaften von Biomaterialien, welche als Implantate eingesetzt werden, ist
eine grundlegende Voraussetzung für deren erfolgreichen Einsatz. Die Protein-Oberflächen-
Interaktion geschieht initial, sobald ein Implantat mit Körperflüssigkeiten oder mit Gewebe
in Kontakt kommt, und trägt maßgeblich zur direkten Wechselwirkung von Implantat und
umgebenden Zellen bei. Dieser Prozess wird in der vorliegenden Arbeit an Gelatine untersucht.
Daher bestand ein Ziel darin, stabile, nanometerdünne Gelatineoberflächen herzustellen
und darauf die Adsorption von humanen Plasmaproteinen und bakteriellen Proteinen zu
analysieren.
Die Abscheidung der Gelatinefilme in variabler Schichtdicke auf zuvor mit PPX-Amin modifizierten
Oberflächen wurde unter Verwendung eines Rotationsbeschichters durchgeführt.
Um stabile Hydrogelfilme zu erhalten, wurden die Amingruppen der disaggregierten Gelatinefibrillen
untereinander und mit denen der Amin-Modifizierung durch ein biokompatibles
Diisocyanat quervernetzt. Dieser Prozess lieferte einen reproduzierbaren und chemisch stabilen
Gelatinefilm, welcher durch die substratunabhängige Amin-Modifizierung kovalent auf
unterschiedlichste Oberflächen aufgebracht werden konnte. Die durch den Herstellungsprozess
präzise eingestellte Schichtdicke (Nano- bzw. Mikrometermaßstab) wurde mittels Ellipsometrie
und Rasterkraftmikroskopie ermittelt. Die ebenso bestimmte Rauheit war unabhängig
von der Schichtdicke sehr gering. Gelatinefilme, die auf funktionalisierte und strukturierte
Proben aufgebracht wurden, konnten durch Elektronenmikroskopie dargestellt werden. Mit
Hilfe der Infrarot-Reflexions-Absorptions-Spektroskopie wurden die Gelatinefilme im Hinblick
auf ihre Stabilität chemisch charakterisiert. Zur Quantifizierung der Adsorption humaner
Plasmaproteine (Einzelproteinlösungen) und komplexer Proteingemische aus steril filtrierten
Kulturüberständen des humanpathogenen Bakteriums Pseudomonas aeruginosa wurde die
Quarzkristall-Mikrowaage mit Dissipationsüberwachung eingesetzt. Hiermit konnte nicht
nur die adsorbierte Menge an Proteinen auf dem Gelatinehydrogel bzw. Referenzoberflächen
(Gold, PPX-Amin, Titan), sondern auch die viskoelastischen Eigenschaften des adsorbierten
Proteinfilms bestimmt werden. Allgemein adsorbierte auf dem Gelatinehydrogel eine geringere
Proteinmasse im Vergleich zu den Referenzoberflächen. Circa ein Viertel der adsorbierten
Proteine migrierte in die Poren des gequollenen Gels und veränderte dessen viskoelastische
Eigenschaften. Durch anschließende MALDI-ToF/MS- und MS/MS-Analyse konnten die bakteriellen
Proteine auf den untersuchten Oberflächen identifiziert und untereinander verglichen
werden. Hierbei zeigten sich nur geringfügige Unterschiede in der Proteinzusammensetzung.
Zudem wurde eine Sekundärionenmassenspektrometrie mit Flugzeitanalyse an reinen Gelatinefilmen
und an mit humanen Plasmaproteinen beladenen Gelatinefilmen durchgeführt.
Durch eine anschließende multivariante Datenanalyse konnte zwischen den untersuchten
Proben eindeutig differenziert werden. Dieser Ansatz ermöglicht es, die Adsorption von
unterschiedlichen Proteinen auf proteinbasierten Oberflächen markierungsfrei zu untersuchen
und kann zur Aufklärung der in vivo-Situation beitragen. Darüber hinaus bietet dieser
Untersuchungsansatz neue Perspektiven für die Gestaltung und das schnelle und effiziente
Screening von unterschiedlichen Proteinzusammensetzungen.
Biomaterialien können jedoch nicht nur als Implantate oder Implantatbeschichtungen eingesetzt
werden. Im Bereich des drug delivery und der Depotarzneimittel sind biologisch
abbaubare Polymere, aufgrund ihrer variablen Eigenschaften, von großem Interesse. Die
Behandlung von bakteriellen und fungalen Pneumonien stellt insbesondere bei Menschen mit
Vorerkrankungen wie Cystische Fibrose oder primäre Ziliendyskinesie eine große Herausforderung
dar. Oral oder intravenös applizierte Wirkstoffe erreichen die Erreger aufgrund der
erhöhten Zähigkeit des Bronchialsekretes oft nicht in ausreichender Konzentration. Daher
besteht ein weiteres Ziel der vorliegenden Arbeit darin, mittels electrohydrodynamic cojetting
mikrometergroße, inhalierbare, wirkstoffbeladene Partikel mit zwei Kompartimenten
(Janus-Partikel) herzustellen und deren Eignung für die therapeutische Anwendung bei
Lungeninfektionen zu untersuchen.
Durch das in dieser Arbeit entwickelte Lösungsmittelsystem können Janus-Partikel aus
biologisch abbaubaren Co-Polymeren der Polymilchsäure (Poly(lactid-co-glycolid), PLGA)
hergestellt und mit verschiedenen Wirkstoffen beladen werden. Darunter befinden sich ein
Antibiotikum (Aztreonam, AZT), ein Antimykotikum (Itraconazol, ICZ), ein Mukolytikum
(Acetylcystein, ACC) und ein Antiphlogistikum (Ibuprofen, IBU). Die Freisetzung der eingelagerten
Wirkstoffe, mit Ausnahme von ICZ, konnte unter physiologischen Bedingungen
mittels Dialyse und anschließender Hochleistungsflüssigkeitschromatographie gemessen werden.
Die Freisetzungsrate wird von der Kettenlänge des Polymers beeinflusst, wobei eine
kürzere Kettenlänge zu einer schnelleren Freisetzung führt. Das in die Partikel eingelagerte
Antimykotikum zeigte in vitro eine gute Wirksamkeit gegen Aspergillus nidulans. Durch das
Einlagern von ICZ in die Partikel ist es möglich diesen schlecht wasserlöslichen Wirkstoff in
eine für Patienten zugängliche und wirksame Applikationsform zu bringen. In Interaktion mit
P. aeruginosa erzielten die mit Antibiotikum beladenen Partikel in vitro bessere Ergebnisse
als der Wirkstoff in Lösung, was sich in einem in vivo-Infektionsmodell mit der Wachsmotte
Galleria mellonella bestätigte. AZT-beladene Partikel hatten gegenüber einer identischen
Wirkstoffmenge in Lösung eine 27,5% bessere Überlebensrate der Wachsmotten zur Folge.
Des Weiteren hatten die Partikel keinen messbaren negativen Einfluss auf die Wachsmotten.
Dreidimensionale Atemwegsschleimhautmodelle, hergestellt mit Methoden des Tissue Engineerings,
bildeten die Basis für Untersuchungen der Partikel in Interaktion mit humanen
Atemwegszellen. Die Untersuchung von Apoptose- und Entzündungsmarkern im Überstand
der 3D-Modelle zeigte diesbezüglich keinen negativen Einfluss der Partikel auf die humanen
Zellen. Diese gut charakterisierten und standardisierten in vitro-Testsysteme machen es
möglich, Medikamentenuntersuchungen an menschlichen Zellen durchzuführen. Hinsichtlich
der histologischen Architektur und funktionellen Eigenschaften der 3D-Modelle konnte eine
hohe in vitro-/in vivo-Korrelation zu menschlichem Gewebe festgestellt werden. Humane
Mucine auf den 3D-Modellen dienten zur Untersuchung der schleimlösenden Wirkung von
ACC-beladenen Partikeln. Standen diese in räumlichem Kontakt zu den Mucinen, wurde deren
Zähigkeit durch das freigesetzte ACC herabgesetzt, was qualitativ mittels histologischen
Methoden bestätigt werden konnte.
Die in dieser Arbeit entwickelten Herstellungsprotokolle dienen als Grundlage und können
für die Synthese ähnlicher Systeme, basierend auf anderen Polymeren und Wirkstoffen,
modifiziert werden. Gelatine und PLGA erwiesen sich als vielseitig einsetzbare Werkstoffe
und bieten eine breite Anwendungsvielfalt in der Regenerativen Medizin, was die erzielten
Resultate bekräftigen.
Hintergrund
Jede Implantation alloplastischer Materialien führt durch Aktivierung der körpereigenen Immunabwehr zu einer Fremdkörperreaktion. An der Synthese der Extrazellulärmatrix und der entstehenden Kollagenkapsel sind insbesondere Makrophagen und Fibroblasten beteiligt. Diese Reaktionen können die Material-Funktionsfähigkeit abschwächen, aufheben oder zu deren operativer Entfernung zwingen.
Fragestellung und Ziele
Spinnenseide ist ein Material mit hoher Biokompatibilität. Nachdem es gelungen ist, Spinnenseide rekombinant herzustellen, soll untersucht werden, wie sich die Verträglichkeit alloplastischer Materialien durch eine Beschichtung mit biotechnologisch hergestellter Spinnenseide beeinflussen lässt.
Eine weitere Möglichkeit ist der TGF-β-Synthese-Inhibitor Halofuginon, der ebenfalls hinsichtlich seiner Potenz, die Ausbildung einer Fibrosekapsel zu vermindern, untersucht werden soll.
Methodik
Anhand von in-vitro-Untersuchungen wurden die bei der Fremdkörperreaktion beteiligten Zelltypen auf ihr Proliferationsverhalten und die Expression unterschiedlicher Genprodukte hinsichtlich bestehender Unterschiede zwischen den jeweiligen Oberflächenbeschichtungen untersucht. Es wurden immunhistochemische Färbungen zum Nachweis spezifischer Oberflächenantigene, Bestimmungen von ATP- und DNA-Gehalt als Maß für die Zellzahl, sowie molekulargenetische Untersuchungen hinsichtlich der Expression relevanter Markergene (rtPCR) durchgeführt.
Ergebnisse
Eine Beschichtung mit rekombinanter Spinnseide führt - im Vergleich zu reinen Silikonimplantaten - zu einer verzögerten und reduzierten Immunreaktion. Die EZM-Synthese und die damit verbundene fremdkörperassoziierte Fibrose werden vermindert und so die Biokompatibilität alloplastischer Materialien gesteigert.