Refine
Has Fulltext
- yes (71)
Is part of the Bibliography
- yes (71)
Year of publication
Document Type
- Doctoral Thesis (71) (remove)
Language
- English (71) (remove)
Keywords
- Übergangsmetallkomplexe (6)
- Bor (5)
- Borylierung (5)
- DFT (5)
- Übergangsmetall (5)
- Dichtefunktionalformalismus (4)
- Fluoreszenz (4)
- Konjugierte Polymere (4)
- Rhodium (4)
- Triarylborane (4)
Institute
- Institut für Anorganische Chemie (71) (remove)
Sonstige beteiligte Institutionen
- Fraunhofer Insitut für Silicatforschung ISC (1)
- Fraunhofer-Institut für Chemische Technologie (ICT) (1)
- Institut Ruđer Bošković, Zagreb, Croatia (1)
- Institut für Organische Chemie, RWTH Aachen (1)
- Institute of Transformative Bio-Molecules, Nagoya University, Nagoya, Japan (1)
- Université de Bordeaux, Bordeaux, France (1)
This Ph.D. thesis has addressed several main issues in current ASSB research within four studies. Ceramic ASSBs are meant to enable the implementation of Li-metal anodes and high voltage cathode materials, which would increase energy density, power density, life time as well as safety aspects in comparison with commercially available liquid electrolyte LiBs. In this thesis, several scientific questions arising on the cathode side of ASSBs have been focused on. With respect to the target system of a ternary composite bulk cathode consisting of ceramic active material, ceramic SSE and an electrically conductive component, studies about the thermal stabilities of these components and their impact on the electrochemical performance have been conducted. Particulate bulk cathode composites have to fulfil electrochemical, chemical, mechanical and structural requirements in order to compete with commercial LiBs. Particularly, the production process requires high-temperature sintering to obtain firmly bonded contacts in order to maximize the electrochemically active area, charge transfer and ionic conduction. However, interdiffusion, intermixing and decomposition of the initial components during sintering result in low-performing ASSBs so far.
These side reactions during high-temperature treatment have been investigated in order to gain a better understanding of these mechanisms and to enable a better controlling of the manufacturing process as well as to simplify the choice of material combinations. The first two parts of this thesis deal with the thermal stability of the ceramic SSE LATP in combination with various active materials and with the validation of a probable improvement of the sintering process due to liquid phase sintering of LATP by adding Li3PO4. In the third and fourth parts, the impact of interdiffusion, intermixing and decomposition on the electrochemical performance of TF-SSBs based on the active material LMO and the ceramic SSE Ga-LLZO has been investigated.
π-Conjugated organic polymers have attracted tremendous attention in the last decades, and the interest in these materials is mainly driven by their applicability in next-generation electronic and optoelectronic devices (OLEDs, OFETs, photovoltaics). The partial or complete replacement of carbon atoms by main group elements in conjugated polymers can significantly change the characteristics and applications of these macromolecules. In this work, a class of inorganic polymers comprising a backbone of exclusively boron and nitrogen atoms (poly(iminoborane)s, PIBs) and their monodisperse oligomers is described. In addition, novel inorganic–organic hybrid polymers containing BN units in their polymer backbone were synthesized and characterized.
In chapter 2.1, the development of catalytic B–N coupling routes for the controlled synthesis of macromolecular materials is described. While the reaction of an N-silyl-B-chloro-aminoborane with the electrophilic reagent trimethylsilyl triflate led to effective B–N coupling, the reaction with a silver(I) salt resulted in an intramolecular Cl/Me exchange between the boron and silicon centers.
In chapter 2.2-2.4, the study of oligo- and poly(iminoborane)s is discussed. Monodisperse and cyclolinear oligo(iminoborane)s based on diazaborolidines with up to 7 boron and 8 nitrogen atoms were synthesized by successively extending the B-N main chain. However, the use of benzodiazaborolines only led to limited BN catenation. Furthermore, the redistribution processes resulting from the reaction of longer oligomers with non-stoichiometric amounts of (di)halogenated boranes is reported.
In chapter 2.5-2.6, the synthesis of 1,2,5-azadiborolanes as building blocks for the synthesis of poly(iminoborane)s and inorganic-organic hybrid polymers is described. While the attempt to apply an azadiborolane with sterically demanding groups on the boron-bridging ethylene unit for the construction of PIB was unfeasible, it was successfully incorporated in inorganic-organic hybrid polymers. Photophysical studies indicated π-conjugation along the polymer chain. A first attempt to synthesize PIBs based on azadiborolanes with unsubstituted ethylene units showed promising results.
In chapter 2.7-2.8, a comprehensive study of poly(arylene iminoborane)s, which are BN analogs of poly(arylene vinylene)s is described, and the properties of four polymers as well as twelve monodisperse oligomers were investigated. Photophysical investigations of the monomers, dimers and polymers showed a systematic bathochromic shift of the absorption maximum with increasing chain length and thiophene content. Based on TD-DFT calculations of the model oligomers, the lowest-energy absorption band could be assigned to HOMO to LUMO transitions with π-π* character. The oligo- and poly(arylene iminoborane)s showed only very weak to no emission in solution but they were emissive in the solid state. For four oligomers the aggregation induced emission (AIE) in a THF/water mixture was investigated and DLS studies confirmed the formation of nanoaggregates.
In chapter 2.9, oligo- and polymerizations of sulfur-containing building blocks and subsequent pH-triggered degradation of the products is described. While a sulfilimine-containing oligomer could not be isolated, the sulfone-, sulfoximine-, and sulfoxide-containing molecular oligomers and polymers could be successfully synthesized by B=N or B–O bond formation reactions. The sulfur-containing building blocks were successfully released under acidic or basic conditions, which was confirmed by NMR spectroscopy and mass spectrometry.
The 1st chapter provides a detailed review of the development of synthetic approaches to triarylboranes from their first report nearly 135 years ago to the present. In the 2nd chapter, a novel and convenient methodology is reported for the one-pot synthesis of sterically-congested triarylboranes, using bench-stable aryltrifluoroborates as the boron source. The new procedure gives access to symmetrically- and unsymmetrically-substituted triarylboranes. The borylated triarylboranes are suggested as building blocks for the design of functional materials. In the 3rd chapter, four luminescent tetracationic bis-triarylborane DNA and RNA sensors that show high binding affinities, in several cases even in the nM range, are investigated. The molecular structures of two of the neutral precursors reveal some structural flexibility for these compounds in the solid state. The compounds were found to be highly emissive even in water and DNA and RNA binding affinities were found to be dependent on linker length and flexibility. Strong SERS responses for three of the four compounds demonstrate the importance of triple bonds for strong Raman activity in molecules of this compound class. In chapter 4, the compound class of water-soluble tetracationic bis-triarylborane chromophores is extended by EDOT-linked compounds and those are compared to their thiophene-containing analogs. Absorption and emission are significantly red-shifted in these compounds, compared to their thiophene-containing analogs and, due to a large Stokes shift, one of the reported compounds exhibits the most bathochromically shifted emission, observable well into the near infrared region, of all tetracationic water-soluble bis-triarylborane chromophores reported to date. Long-lived excited states, completely quenched by oxygen, were observed for the water-stable compounds of this study via transient absorption spectroscopy and a quantum yield for singlet oxygen formation of 0.6 was determined for one of them.
N-heterocyclic carbenes (NHC) are utilized for the stabilization of reactive compounds, for the activation of strong bonds, and as ligands in transition metal chemistry. In contrast to neutral NHCs, few examples of anionic or even dianionic NHCs are known. One approach for the synthesis of anionic carbenes is the deprotonation of neutral or anionic precursors, bearing Lewis acids instead of alkyl or aryl substituents. Following this strategy, novel anionic and dianionic NHCs, featuring weakly coordinating fluorinated borane and phosphorane substituents or coordinating tricyanoborane substituents were synthesized within the scope of this thesis. These carbenes possess unprecedented stabilities compared to related species. Furthermore, their electronic and steric properties can be directly adjusted by the type of Lewis acid attached. Their potential as ligands with highly shielding weakly coordinating substituents next to the carbene coordination center was demonstrated by the syntheses of the respective NHC selenium adducts and NHC gold(I) complexes. In contrast anionic NHCs with coordinating tricyanoborane moieties have an outstanding potential as ditopic ligands with coordination being possible at the carbene center and via the cyano groups. Their beneficial ligand properties were demonstrated by the syntheses of the respective NHC selenium adducts and NHC nickeltricarbonyl complexes. The combination of electronic properties, the large buried volume, the negative charge, the possibility to act as ditopic or ligands with weakly coordinating groups, and the ease of accessibility render borane- and phosphorane functionalized NHCs unique novel ligands. A further project of this PhD thesis deals with the steric properties of Lewis acids. Therefore, an easy-to-apply model was designed to quantify the steric demand of Lewis acids. Using the results of this evaluation, a second model was developed which judges the steric repulsion in Lewis acid/base adduct formation for arbitrary sets of acids and bases.
This thesis describes the synthesis and reactivity of bis-NHC ligated nickel(0)-complexes and their application in catalytic cyclization and borylation reactions of alkynes. The focus of the presented work lies on the investigation of the electronic and steric impact of different NHC ligands on the reactivity and catalytic activity of [Ni(NHC)2] complexes. Since d10 ML2 complexes play a decisive role for numerous catalytic reactions, such as the Suzuki-Miyaura cross-coupling, the first chapter provides an overview about the general properties of NHCs and the chemistry of NHC-ligated nickel complexes, their synthesis, characterization, reactivity, and application in catalysis.
Bisdiynes undergo Pd(0)-catalyzed cyclization, forming azulene and naphthalene products. When dibenzylideneacetone is present in the reaction, it undergoes a [2+2+2] cyclization with the bisdiyne, forming cyclohexadiene derivatives. Ni(0) catalyzes the [2+2+2] cycloaddition of diynes with tolanes towards alkynylated o-terphenyl derivatives. The D-A substituted products are solvatochromic, fluorescent dyes with high quantum yields and short lifetimes. Bis-triarylborane tetrayne dyes were synthesized in both neutral and tetracationic forms, as potential DNA/RNA sensor. Both molecules are weakly fluorescent in solution and exhibit characteristic alkyne absorptions in the Raman spectra. Tributyl phosphine catalyzes the trans-hydroboration of 1,3-butadiynes with HBpin. We confirmed experimentally via NMR and HRMS experiments, that phosphine attack on the diyne is a key step in the catalytic cycle.
1. Bis(1-(4-tolyl)-carboran-2-yl)-(4-tolyl)-borane, a new bis(o-carboranyl)-(R)-borane 1 was synthesised by lithiation of the o-carboranyl precursor and subsequent salt metathesis reaction with (4-tolyl)BBr2. Cyclic voltammetry experiments on 1 show multiple distinct reduction events with a one-electron first reduction. In a selective reduction experiment the corresponding paramagnetic radical anion 1•− was isolated and characterized. Single-crystal structure analyses allow an in-depth comparison of 1, 1•−, their calculated geometries, and the S1 excited state of 1.
2. The choice of backbone linker for ortho-bis-(9-borafluorene)s has a great influence on the LUMO located at the boron centers and therefore the reactivity of the respective compounds. Herein, we report the room temperature rearrangement of 1,2-bis-(9-borafluorenyl-)-ortho-carborane, C2B10H10-1,2-[B(C12H8)]2 ([2a]) featuring o-carborane as the inorganic three-dimensional backbone and the synthesis of 1,2-bis-(9-borafluorenyl-)benzene, C6H4-1,2-[B(C12H8)]2 (2b) its phenylene analog. DFT calculations on the transition state for the rearrangement support an intramolecular C–H bond activation process via an SEAr-like mechanism in [2a], and predicted that the same rearrangement would take place in 2b, but at elevated temperatures, which indeed proved to be the case.
3. We synthesized 4 a julolidine-like pyrenyl-o-carborane, with pyrene substituted at the 2,7-positions on the HOMO/LUMO nodal plane, continuing our research. Using solid state molecular structures, photophysical data, cyclic voltammetry, DFT and TD-DFT calculations we compare o-carborane and the B(mes)2 (mes = 2,4,6-Me3C6H2) as acceptor groups and confirm the julolidine-like donor strength.
This work involves the synthesis and reactivity of pseudohalide-substituted boranes and borylenes. A series of compounds of the type (CAAC)BR2Y (CAAC = cyclic alkyl(amino)carbene; R = H, Br; Y = CN, NCS, PCO) were prepared first. The two-electron reduction of (CAAC)BBr2Y (Y = CN, NCS) in the presence of a second Lewis base L (L = N-heterocyclic carbene) resulted in the formation of the corresponding doubly Lewis base-stabilized pseudohaloborylenes (CAAC)(L)BY. These borylenes show versatile reactivity patterns, including their oxidation to the corresponding radical cations, coordination via the respective pseudohalide substituent to group 6 metal carbonyl complexes, as well as a boron-centered protonation with Brønsted acids to boronium cations. Reduction of (CAAC)BBr2(NCS) in the absence of a second donor ligand, led to the formation of boron-doped thiazolothiazoles via reductive dimerization of two isothiocyanatoborylenes. These B,N,S-heterocycles possess a low degree of aromaticity as well as interesting photophysical properties and can furthermore be protonated as well as hydroborated. Additionally, CAAC adducts of the parent boraphosphaketene (CAAC)BH2(PCO) could be prepared, which readily reacted with boroles [Ph4BR'] (R' = aryl) via decarbonylation in a ring expansion reaction. The obtained 1,2-phosphaborinines represent B,P-isosteres of benzene and consequently could be coordinated to metal carbonyl complexes of the chromium triade via η6-coordination, resulting in new half-sandwich complexes thereof.
After implementing a reliable mass spectrometry based kinetic study the indole conjugation with different organometallic indoles led to questions about the electronical and sterical influences on reactivity. The substitution pattern of the ferrocene functionalized indoles at the six-membered ring determines the electron density on the C3 atom, which reacts with the formed Schiff base. Since the experimental results showed the exact opposite trend, covalent docking studies were performed elucidating the importance of surface interactions. These studies were in harmony with the experimental results and determined lysine 33 as most preferable conjugation site as well as substitution in 6-position as most favourable pattern. The amine motif in compounds 6, 7 and 8 proofed to be easily fragmented by the ESI method used. The amide linker in 10 remains intact but shows a lower conversion. Those two inherent characteristics are however preferable for well-defined and site-specific bioconjugation. The synthesis and evaluation of piano stool complex derivatives with manganese and rhenium metal centre 15, 16, 18 and 22 gave additional guidance by the interpretation of applicable structural motifs. The electron-withdrawing carbonyl groups lead to the hindrance of fulvene formation and thus to no fragmentation as seen with the ferrocene group. The total conversion is low compared to 8, only 22 shows a good enough conversion to mainly monoconjugate of 45% and a possible radio-labelling application as 99mTc analogue. As consequence manganese complexes with a stable facial tricarbonyl unit and a tridentate chelator with 4-, 5- and 6-substituted aminomethylindole conjugated through an amide bond were synthesized and consecutively evaluated. The resulting organometallic indole derivatives 29, 30 and 31 all showed a total conversion around 40% similar to 16, but at the same time a rate constant in the range of 10-4 s-1 like the organic indole. Besides the similar conversion, the rate constants followed the trend of the 6-substituted derivative as fastest and then 5- and 4- substituted derivative with decreasing reactivity. For underlining the usage as technetium label for the best out of the series 31, a rhenium analogue was prepared. The resulting compound 32 was especially interesting, because the conversion was even higher than the 70% of 8 with a total of 88%. Additionally, the rate constant was a tenfold higher as well. This rendered compound 32 as best possible 99mTc analogue for further application as radio-label. After the success of 32 and realizing the sterical benefits resulting from the flexible tridentate ligand-system, substitution at the five-membered ring was explored. The complexes 33, 34 and 35 are based on indole-2-carboxylic acid and with the difference of the length of the alkyl spacer between amide and complex to probe for the influence and sterical hindrance, but all three derivatives showed no conjugation which excludes functionalization in 2-position. As the C3 is used for the actual bioconjugation, the last possible derivatization was realized on the indole-N1 by using 1-(3-bromopropyl)indole as building block during the synthesis of the ligand-system. The corresponding manganese 36 and rhenium 37 complexes both showed similar properties of a moderate conversion like 22 and a rate constant in the range of 10-5 s-1. In conclusion the rhenium complex 32 with the 6-substitution pattern at the tridentate indole-bearing ligand remains the most promising structure.
The here developed liquid chromatography coupled mass spectrometry-based assay for the determination of inhibitory activity of drug candidates against the 3CLpro of the sever acute respiratory syndrome coronavirus type 2 was successfully implemented and especially designed to give, due to the available absorption spectra and corresponding mass traces, further insight in the otherwise through fluorescence resonance energy transfer-based assays neglected influences on the inhibition results. Starting with a literature-known quinolone containing covalent inhibitor 42 an N1-methylated derivative 43 and their analogues 44 and 45 in which the benzoic acid was exchanged for ferrocene carboxylic acid were synthesized. The inhibition of 3CLpro was evaluated by the concentration of initial 15mer peptide left after incubation and for that purpose the for 280 nm defined molar attenuation coefficient of (26.41±0.59) L*mol-1*cm-1 determined and used. The results showed a reaction of DL dithiothreitol with the less stable benzoic acid esters leading to a moderate inhibitory effect. The methylation in N1-position showed an increase in stability. The methylated and with ferrocene carboxylic acid functionalized derivative showed a complete inhibition during the timeframe of the assay. In search of a fluorescent and therefore traceable inhibitor, 4 hydroxycoumarin was used to synthesize the analogue with benzoic acid 49 and ferrocene carboxylic acid 50. Both derivatives were less stable than their analogues but exhibited the same trend of a more stable ferrocene-derived compound, which exerted a higher inhibition as well. After preparing and testing the model thioester 53 and showing an inactivation of the established inhibitor ebselen, it was concluded that the reaction with DL dithiothreitol reduces the concentration of active intact inhibitor and therefore decreases the inhibition rate during the assay. The next step was proofing the reducing agent as non-essential for the fast assay conducted in a timeframe of 5 min to circumvent the negative influence of DL dithiothreitol. By excluding every inhibition-altering part, the resulting method is the perfect tool for precise statements in relation of inhibitory activity. Then the inhibition assay was repeated for ebselen and the best out of the here introduced organometallic inhibitors 45. Both give equivalent results of a complete inhibition during the measurement. The implemented liquid chromatography coupled mass spectrometry-based assay has many advantages over the fluorescence resonance energy transfer-based assays in which all the information and insight accumulated by the evaluation of uv/vis traces and mass spectra are not available leading to wrong or deviating results regarding the inhibitory capacity of inhibitor candidates.
The present work focusses on the borylation of aryl halides. The first chapter presents a detailed review about previously reported nickel-catalyzed borylation reactions. The second chapter of the thesis describes, the borylation reaction of C–Cl bonds in aryl chlorides mediated by an NHC-stabilized nickel catalyst. The cyclohexyl substituted NHC Cy2Im was used to synthesize novel Cy2Im-stabilized nickel complexes [Ni2(Cy2Im)4(μ-(η2:η2)-COD)] 1, [Ni(Cy2Im)2(η2-C2H4)] 2, and [Ni(Cy2Im)2(η2-COE)] 3. An optimized procedure was developed using 5 mol% of the Ni-catalyst, 1.5 equivalents of the boron reagent B2pin2, and 1.5 equivalents of NaOAc as the base in methylcyclohexane at 100 °C. With these optimized conditions, it was shown that a variety of aryl chlorides, containing either electron-withdrawing or -donating groups, were converted to the corresponding aryl boronic esters in yields up to 99% (88% isolated) yield. Mechanistic investigations revealed that the C–Cl oxidative addition product [Ni(Cy2Im)2(Cl)(4-F3C-C6H4)] 11, which has been synthesized and isolated separately, also catalyzes the reaction. Thus, rapid oxidative addition of the C–Cl bond of the aryl chloride to [Ni2(Cy2Im)4(μ-(η2:η2)-COD)] 1 to yield trans-[Ni(Cy2Im)2(Cl)(Ar)] represents the first step in the catalytic cycle. The rate limiting step in this catalytic cycle is the transmetalation of boron to nickel forming trans-[Ni(Cy2Im)2(Bpin)(Ar)], which was not possible to isolate. The boryl transfer reagent is assumed to be the anionic adduct Na[B2pin2(OAc)]. A final reductive elimination step gives the desired borylated product Ar–Bpin and regenerates [Ni(Cy2Im)2].
In the next chapter the first effective C–Cl bond borylation of aryl chlorides using NHC-stabilized Cu(I)-complexes of the type [Cu(NHC)(Cl)] was developed. The known complexes [Cu(iPr2Im)(Cl)] 15, [Cu(Me2ImMe)(Cl)] 16, and [Cu(Cy2Im)(Cl)] 17, bearing the small alkyl substituted NHCs, were synthesized in good yields by the reaction of copper(I) chloride with the corresponding free NHC at low temperature (-78 °C) in THF. A range of catalysts, bases, solvents, and boron sources were screened to determine the scope and limitations of this reaction. [Cu(Cy2Im)(Cl)] 17 revealed a significantly higher catalytic activity than [Cu(iPr2Im)(Cl)] 15. KOtBu turned out to be the only efficient base for this borylation reaction. Besides methylcyclohexane, toluene was the only solvent that gave the borylated product in moderate yields of 53%. It was shown that a variety of electron-rich and electron-poor aryl chlorides can be converted to the corresponding aryl boronic esters in isolated yields of up to 80%. A mechanism was proposed, in which a Cu-boryl complex [Cu(L)(Bpin)] is formed in the initial step. This is followed by C–B bond formation via σ-bond metathesis with the aryl chloride forming the aryl boronic ester and [Cu(L)(Cl)]. The latter reacts with KOtBu to give [Cu(L)(OtBu)], which regenerates the copper boryl complex by reaction with B2pin2.
Chapter 4 describes studies directed towards the transition metal-free borylation of aryl halides using Lewis base adducts of diborane(4) compounds. A variety of novel pyridine and NHC adducts of boron compounds were synthesized. Adducts of the type pyridine·B2cat2 18-19 and NHC·B2(OR)4 20-23 were examined for their ability to transfer a boryl moiety to an aryl iodide. However, only Me2ImMe∙B2pin2 20 was found to be effective. The stoichiometric reaction of 20 with different substituted aryl iodides and bromides in benzene, at elevated temperatures, gave the desired aryl boronic esters in good yields. Interestingly, depending on the reaction temperature, C–C coupling between the aryl halide and the solvent (benzene), was detected leading to a side product which, together with observed hydrodehalogenation of the aryl halide, provided indications that the reaction might be radical in nature.
When the boryl transfer reaction based on Me2ImMe∙B2pin2 20 was followed by EPR spectroscopy, a signal (though very weak and ill-defined) was detected, which is suggestive of a mechanism involving a boron-based radical. In addition, the boronium cation [(Me2ImMe)2∙Bpin]+ 37 with iodide as the counterion was isolated from the reaction residue, indicating the fate of the second boryl moiety. A preliminary mechanism for the boryl transfer from 20 to aryl iodides was proposed, which involves an NHC–Bpin˙ radical as the key intermediate. Me2ImMe–Bpin˙ is formed by homolytic B–B bond cleavage of the bis-NHC adduct (Me2ImMe)2∙B2pin2, which is formed in situ in small amounts under the reaction conditions. Me2ImMe–Bpin˙ reacts with the aryl iodide to give the aryl boronic ester with recovery of aromaticity. In the same step, from the second equivalent of NHC–Bpin˙, an NHC-stabilized iodo-Bpin adduct is formed as an intermediate, which is further coordinated by another NHC, yielding [(Me2ImMe)2∙Bpin]+I- 37.
This dissertation describes the synthesis of an unsymmetrically-substituted triarylborane. This term describes a three-coordinate boron atom that is bound to three different aromatic systems, namely 2,6-dimethylphenyl, mesityl, and 4-(N,N-dimethylamino)-2,6-dimethylphenyl. It is also demonstrated that the amine functionality can be converted with methyl triflate into an ammonium moiety. The investigation of photophysical and electrochemical properties of this compound in comparison with the non-aminated and di-aminated analogues of the triarylborane is described besides other investigations of e. g. singlet oxygen sensitization, rotational barriers, and fundamental DFT calculations. Based on these investigations, selectively mono-, bis- and tris-dimethylamino- and trimethylammonium-substituted bis-triarylborane bithiophene chromophores were synthesized and their photophysical, and electrochemical properties were investigated together with the water solubility and singlet oxygen sensitizing efficiency of the cationic compounds Cat1+, Cat2+, Cat(i)2+, and Cat3+. Comparing these properties with the results obtained for the mono-triarylboranes reveals a large influence of the bridging unit on the investigated properties of the bis-triarylboranes. In addition, the interaction of the cationic bis-triarylboranes with different polynucleotides were investigated in buffered solutions as well as the ability of these selectively charged compounds to enter and localize within organelles of human lung carcinoma and normal lung cells. All these investigations demonstrate that the number of charges and their distribution influences the interactions and staining properties as well as most of the other properties investigated.
In addition, preliminary investigations on H2O2-cleavable boronate esters in the presence of stochiometric amounts of H2O2 are described for three different aryl boronate esters.
Alkylboronates play an important role in synthetic chemistry, materials science and drug discovery. They are easy to handle due to their good air and moisture stability, and can be readily employed to form carbon–carbon and carbon–heteroatom bonds and can be converted to various functional groups under mild reaction conditions. Compared with conventional groups, such as aryl (pseudo)halides or alcohols, organosulfur compounds represent an alternative and complimentary substitute in coupling reactions. The construction of C–B bond from C–SO bond of aryl sulfoxide is presented in Chapter 2. The selective cleavage of either alkyl(C)-sulfonyl or aryl(C)-sulfonyl bonds of an aryl alkyl sulfone via Cu-free or Cu-mediated processes generates the corresponding boronate esters, which are presented in Chapter 3 and Chapter 4. 1,2-Bis(boronate esters) are emerging as important synthetic intermediates for preparing 1,2-difunctional compounds. In addition, the boryl moieties in different environments in a 1,2-bis(boronate ester) can be differentiated and converted selectively, allowing the synthesis of a wide variety of complex molecules. A direct and selective diboration of C–X and C–O bonds for the preparation of 1,2-bis(boronate esters) is presented in Chapter 5.
Persistent room temperature phosphorescent (RTP) luminophores have gained remarkable interest recently for a number of applications in security printing, OLEDs, optical storage, time-gated biological imaging and oxygen sensors. We report the first persistent RTP with lifetimes up to 0.5 s from simple triarylboranes which have no lone pairs. We also have prepared 3 isomeric (o, m, p-bromophenyl)-bis(2,6-dimethylphenyl)boranes. Among the 3 isomers (o-, m- and p-BrTAB) synthesized, the ortho-one is the only one which shows dual phosphorescence, with a short lifetime of 0.8 ms and a long lifetime of 234 ms in the crystalline state at room temperature. At last, we checked the RTP properties from the boric acid. We found that the pure boric acid does not show RTP in the solid state.
Chapter 1 deals with the reaction of [Rh(acac)(PMe3)2] with para-substituted 1,4-diphenylbuta-1,3-diynes at room temperature, in which a complex containing a bidentate organic fulvene moiety, composed of two diynes, σ-bound to the rhodium center is formed in an all-carbon [3+2] type cyclization reaction. In addition, a complex containing an organic indene moiety, composed of three diynes, attached to the rhodium center in a bis-σ-manner is formed in a [3+2+3] cyclization process.
Reactions at 100 °C reveal that the third diyne inserts between the rhodium center and the bis-σ-bound organic fulvene moiety. Furthermore, the formation of a 2,5- and a 2,4-bis(arylethynyl)rhodacyclopentadiene is observed. The unique [3+2] cyclization product was used for the synthesis of a highly conjugated organic molecule, which is hard to access or even inaccessible by conventional methods. Thus, at elevated temperatures, reaction of the [3+2] product with para-tolyl isocyanate led to the formation of a purple organic compound containing the organic fulvene structure and one equivalent of para-tolyl isocyanate.
The blue and green [3+2+3] complexes show an unusually broad absorption from 500 – 1000 nm with extinction coefficients ε of up to 11000 M-1 cm-1. The purple organic molecule shows an absorption spectrum similar to those of known diketopyrrolopyrroles.
Additionally, the reaction of [Rh(acac)(PMe3)2] with para-tolyl isocyanate was investigated. A cis-phosphine complex of the form cis-[Rh(acac)(PMe3)2(isocyanate)2] with an isocyanate dimer bound to the rhodium center by one carbon and one oxygen atom was isolated.
Replacing the trimethylphosphine ligands in [Rh(acac)(PMe3)2] with the stronger σ-donating NHC ligand Me2Im (1,3-dimethylimidazolin-2-ylidene), again, drastically alters the reaction. Similar [3+2] and [3+2+3] products to those discussed above could not be unambiguously assigned, but cis- and trans-π-complexes, which are in an equilibrium with the two starting materials, were formed.
Chapters 2 is about the influence of the backbone of the α,ω-diynes on the formation and photophysical properties of 2,5-bis(aryl)rhodacyclopentadienes. Therefore, different α,ω-diynes were reacted with [Rh(acac)(PMe3)2] and [Rh(acac)(P(p-tolyl)3)2] in equimolar amounts. In general, a faster consumption of the rhodium(I) starting material is observed while using preorganized α,ω-diynes with electron withdrawing substituents in the backbone. The isolated PMe3-substituted rhodacyclopentadienes exhibit fluorescence, despite the presence of the heavy atom rhodium, with lifetimes τF of < 1 ns and photoluminescence quantum yields Φ of < 0.01 as in previously reported P(p-tolyl)-substituted 2,5-bis(arylethynyl)rhodacyclopentadienes. However, an isolated P(p-tolyl)-substituted 2,5-bis(aryl)rhodacyclopentadiene shows multiple lifetimes and different absorption and excitation spectra leading to the conclusion that different species may be present.
Reaction of [Rh(acac)(Me2Im)2] with dimethyl 4,4'-(naphthalene-1,8-diylbis(ethyne-2,1-diyl))dibenzoate, results in the formation of a mixture trans- and cis-NHC-substituted 2,5-bis(aryl)rhodacyclopentadienes.
In chapter 3 the reaction of various acac- and diethyldithiocarbamate-substituted rhodium(I) catalysts bearing (chelating)phosphines with α,ω-bis(arylethynyl)alkanes (α,ω-diynes), yielding luminescent dimers and trimers, is described. The photophysical properties of dimers and trimers of the α,ω-diynes were investigated and compared to para-terphenyl, showing a lower quantum yield and a larger apparent Stokes shift.
Furthermore, a bimetallic rhodium(I) complex of the form [Rh2(ox)(P(p-tolyl)3)4] (ox: oxalate) was reacted with a CO2Me-substituted α,ω-tetrayne forming a complex in which only one rhodium(I) center reacts with the α,ω-tetrayne. The photophysical properties of this mixed rhodium(I)/(III) species shows only negligible differences compared to the P(p-tolyl)- and CO2Me-substituted 2,5-bis(arylethynyl)rhodacyclopentadiene, previously synthesized by Marder and co-workers.
This thesis describes the synthesis and reactivity of NHC-stabilized Lewis-acid/Lewis-base adducts of alanes and gallanes (NHC = Me2ImMe, iPr2Im, iPr2ImMe, Dipp2Im, Dipp2ImH). As this field of research has developed tremendously, especially in the last five years, the first chapter provides an overview of the current state of knowledge.
The influence of electronegative π-donor-substituents on the stability of the NHC alane adducts is examined in chapter 2. For this purpose, the carbene stabilized alanes (NHC)∙AlH3 (NHC = iPr2Im, Dipp2Im) were reacted with secondary amines of different steric demand and with phenols. The π-donor substituents saturate the Lewis acidic aluminium center and coordination of a second NHC-ligand was not observed. The strongly electronegative N and O substituents increase the Lewis acidity of the aluminium atom, which leads to stronger Al-CNHC as well as Al-H bonds, which inhibits the insertion of the carbene into the Al-H bond.
In Chapter 3 the development of the synthesis and reactivity of carbene-stabilized gallanes is presented. The synthesis of NHC gallane adducts (NHC)∙GaH3, (NHC)∙GaH2Cl and (NHC)∙GaHCl2 and their reactivity towards NHCs and cAACMe were investigated in detail. The reaction of the mono- and dichlorogallanes (NHC)∙GaH2Cl and (NHC)∙GaHCl2 (NHC = iPr2ImMe, Dipp2Im) with cAACMe led to insertion of the cAACMe with formation of chiral and achiral compounds depending on the sterically demand of the used NHC. Furthermore, the formation of bis-alkylgallanes was observed for the insertion of two equivalents of cAACMe with release of the NHC ligand.
Chapter 4 describes investigations concerning the synthesis and reactivity of NHC-stabilized iodoalanes and iodogallanes, which are suitable for the formation of cationic aluminium and gallium dihydrides. The reaction of (NHC)∙EH2I (E = Al, Ga) stabilized by the sterically less demanding NHCs (NHC = Me2ImMe, iPr2Im, iPr2ImMe) with an additional equivalent of the NHC led to the formation of the cationic bis-NHC aluminium and gallium dihydrides [(NHC)2∙AlH2]+I- and [(NHC)2∙GaH2]+I-. Furthermore, the influence of the steric demand of the used NHC was investigated. The adduct (Dipp2Im)∙GaH2I was reacted with an additional equivalent of Dipp2Im. Due to the bulk of the NHC used, rearrangement of one of the NHC ligands from normal to abnormal coordination occurred and the cationic gallium dihydride [(Dipp2Im)∙GaH2(aDipp2Im)] was isolated.
Chapter 5 of this thesis reports investigations concerning the reduction of cyclopentadienyl-substituted alanes and gallanes with singlet carbenes. NHC stabilized pentamethylcyclopentadienyl aluminium and gallium dihydrides (NHC)∙Cp*MH2 (E = Al, Ga) were prepared by the reaction of (AlH2Cp*)3 with the corresponding NHCs or by the salt elimination of (NHC)∙GaH2I with KCp*. The gallane adducts decompose at higher temperatures with reductive elimination of Cp*H and formation of Cp*GaI. . The reductive elimination is preferred for sterically demanding NHCs (Dipp2Im > iPr2ImMe > Me2ImMe). In addition, NHC ring expansion of the backbone saturated carbene Dipp2ImH was observed for the reaction of the NHC with (AlH2Cp*)3, which led to (RER-Dipp2ImHH2)AlCp*. Furthermore, the reactivity of the adducts (NHC)∙Cp*EH2 (E = Al, Ga) towards cAACMe was investigated. The reaction of the alane adducts stabilized by the sterically more demanding NHCs iPr2ImMe and Dipp2Im afforded the exceptionally stable insertion product (cAACMeH)Cp*AlH V-10 with liberation of the NHC. The reaction of the gallium hydrides (NHC)∙Cp*GaH2 with cAACMe led to the reductive elimination of cAACMeH2 and formation of Cp*GaI.
A variety of neutral and cationic carbene-stabilized alanes and gallanes are presented in this work. The introduction of electronegative π-donor substituents (Cl-, I-, OR-, NR2-) and the investigations on the thermal stability of these compounds led to the conclusion that the stability of alanes and gallanes increased significantly by such a substitution. Investigations on the reactivity of the NHC adducts towards cAACMe resulted in various insertion products of the carbene into the Al-H or Ga-H bonds and the first cAACMe stabilized dichlorogallane was isolated. Furthermore, a first proof was provided that carbenes can be used specifically for the (formal) reduction of group 13 hydrides of the higher homologues. Thus, the synthesis of Cp*GaI from the reaction of (NHC)∙Cp*GaH2 with cAACMe was developed. In the future, this reaction pathway could be of interest for the preparation of other low-valent compounds of aluminium and gallium.
Organoboron compounds are important building blocks in organic synthesis, materials science, and drug discovery. The development of practical and convenient ways to synthesize boronate esters attracted significant interest. Photoinduced borylations originated with stoichiometric reactions of arenes and alkanes with well-defined metal-boryl complexes. Now photoredox-initiated borylations, catalyzed either by transition-metal or organic photocatalysts, and photochemical borylations with high efficiency have become a burgeoning area of research. In this chapter, we summarize research in the field of photocatalytic C-X borylation, especially emphasizing recent developments and trends, based on transition-metal catalysis, metal-free organocatalysis and direct photochemical activation. We focus on reaction mechanisms involving single electron transfer (SET), triplet energy transfer (TET), and other radical processes.
We developed a highly selective photocatalytic C-F borylation method that employs a rhodium biphenyl complex as a triplet sensitizer and the nickel catalyst [Ni(IMes)2] (IMes = 1,3-dimesitylimidazolin-2-ylidene) for the C-F bond activation and defluoroborylation process. This tandem catalyst system operates with visible (400 nm) light and achieves borylation of a wide range of fluoroarenes with B2pin2 at room temperature in excellent yields and with high selectivity. Direct irradiation of the intermediary C-F bond oxidative addition product trans-[NiF(ArF)(IMes)2] leads to fast decomposition when B2pin2 is present. This destructive pathway can be bypassed by indirect excitation of the triplet states of the nickel(II) complex via the photoexcited rhodium biphenyl complex. Mechanistic studies suggest that the exceptionally long-lived triplet excited state of the Rh biphenyl complex used as the photosensitizer allows for efficient triplet energy transfer to trans-[NiF(ArF)(IMes)2], which leads to dissociation of one of the NHC ligands. This contrasts with the majority of current photocatalytic transformations, which employ transition metals as excited state single electron transfer agents. We have previously reported that C(arene)-F bond activation with [Ni(IMes)2] is facile at room temperature, but that the transmetalation step with B2pin2 is associated with a high energy barrier. Thus, this triplet energy transfer ultimately leads to a greatly enhanced rate constant for the transmetalation step and thus for the whole borylation process. While addition of a fluoride source such as CsF enhances the yield, it is not absolutely required. We attribute this yield-enhancing effect to (i) formation of an anionic adduct of B2pin2, i.e. FB2pin2-, as an efficient, much more nucleophilic {Bpin-} transfer reagent for the borylation/transmetalation process, and/or (ii) trapping of the Lewis acidic side product FBpin by formation of [F2Bpin]- to avoid the formation of a significant amount of NHC-FBpin and consequently of decomposition of {Ni(NHC)2} species in the reaction mixture.
We reported a highly selective and general photo-induced C-Cl borylation protocol that employs [Ni(IMes)2] (IMes = 1,3-dimesitylimidazoline-2-ylidene) for the radical borylation of chloroarenes. This photo-induced system operates with visible light (400 nm) and achieves borylation of a wide range of chloroarenes with B2pin2 at room temperature in excellent yields and with high selectivity, thereby demonstrating its broad utility and functional group tolerance. Mechanistic investigations suggest that the borylation reactions proceed via a radical process. EPR studies demonstrate that [Ni(IMes)2] undergoes very fast chlorine atom abstraction from aryl chlorides to give [NiI(IMes)2Cl] and aryl radicals. Control experiments indicate that light promotes the reaction of [NiI(IMes)2Cl] with aryl chlorides generating additional aryl radicals and [NiII(IMes)2Cl2]. The aryl radicals react with an anionic sp2-sp3 diborane [B2pin2(OMe)]- formed from B2pin2 and KOMe to yield the corresponding borylation product and the [Bpin(OMe)]•- radical anion, which reduces [NiII(IMes)2Cl2] under irradiation to regenerate [NiI(IMes)2Cl] and [Ni(IMes)2] for the next catalytic cycle.
A highly efficient and general protocol for traceless, directed C3-selective C-H borylation of indoles with [Ni(IMes)2] as the catalyst was achieved. Activation and borylation of N-H bonds by [Ni(IMes)2] is essential to install a Bpin moiety at the N-position as a traceless directing group, which enables the C3-selective borylation of C-H bonds. The N-Bpin group which is formed is easily converted in situ back to an N-H group by the oxidiative addition product of [Ni(IMes)2] and in situ-generated HBpin. The catalytic reactions are operationally simple, allowing borylation of of a variety of substituted indoles with B2pin2 in excellent yields and with high selectivity. The C-H borylation can be followed by Suzuki-Miyaura cross-coupling of the C-borylated indoles in an overall two-step, one-pot process providing an efficient method for synthesizing C3-functionalized heteroarenes.
It is generally acknowledged that polyfluoroarenes are important fluorinated structural units for various organic molecules, such as pharmaceuticals, agrochemicals, and organic materials. Polyfluorinated aryl alkynes and alcohols are also powerful building blocks in chemical synthesis because of their versatility to be transformed into various useful molecules and also their ubiquity in natural product synthesis. Efficient methods for the synthesis of polyfluorinated aryl alkynes and alcohols are presented in Chapter 2 and Chapter 3. In addition, 3-amino-indoles have found a broad applications in medicinal chemistry as effective anticancer agents, compounds with analgesic properties and can function as potent inhibitors of tubulin polymerization, and agents for the prevention of type II diabetes. A simple method for the synthesis of 3-amino-indoles via the annulation reaction of polyfluorophenylboronates with DMF is reported in Chapter 4.
Chapter 2
In Chapter 2, a mild process for the copper-catalyzed oxidative cross-coupling of electron-deficient polyfluorophenylboronate esters with terminal alkynes (Scheme S-1) is reported. This method displays good functional group tolerance and broad substrate scope, generating cross-coupled alkynyl(fluoro)arene products in moderate to excellent yields. This copper-catalyzed reaction was conducted on a gram scale to generate the corresponding product in good yield (72%).
Scheme S-1. Copper-catalyzed oxidative cross-coupling of terminal alkynes with polyfluorophenylboronate esters.
Based on previous reports and the aforementioned observations, a plausible catalytic cycle for this oxidative cross-coupling reaction is shown in Scheme S-2. The first step involves the addition of an alkynyl anion to Cu leading to the formation of alkynylcopper(II) species B. Subsequent transmetalation between ArFBpin and intermediate B occurs to form intermediate C. The desired product 3a is generated by eductive elimination. Finally, the oxidation of Cu(0) to Cu(II) with DDQ and Ag2O regenerates A to complete the catalytic cycle.
Scheme S-2. Proposed mechanism of copper(II)-catalyzed oxidative cross-coupling between terminal alkynes and polyfluorophenylboronate esters.
Chapter 3
In Chapter 3, A convenient and efficient protocol for the transition metal-free 1,2-addition of polyfluoroaryl boronate esters to aldehydes and ketones is reported, which provides secondary alcohols, tertiary alcohols, and ketones (Scheme S-3). The distinguishing features of this procedure include the employment of commercially available starting materials and the broad scope of the reaction with a wide variety of carbonyl compounds giving moderate to excellent yields.
Scheme S-3. Base-promoted 1,2-addition of polyfluorophenylboronates to aldehydes and ketones.
Control experiments were carried out to gain insight into the reaction mechanism. The reaction of 2a with pentafluorobenzene 5 under standard conditions was examined, yet 3a was not formed in any detectable amounts (Scheme S-4a), indicating that the C-Bpin moiety is essential and deprotonation of the fluoroarene or nucleophilic attack at the fluoroarene by the base is not a plausible pathway. Interestingly, for the standard reaction between 1a and 2a, the yield dropped dramatically if 18-crown-6 ether and K2CO3 were added (Scheme S-4b). This experimental result indicates that the presence of the potassium ion plays a crucial role for the outcome of the reaction. Furthermore, if the reaction of 1a and 2a was performed in the presence of only a catalytic amount of K2CO3 (20 mol%) (Scheme S-4c), reaction rates were reduced, and a week was required to produce 3a in good yield. This finding again indicates that the potassium ion (or the base) plays an important role in the reaction. Substituting ortho-fluorines by ortho-chlorines, using either C6Cl5Bpin 2,6-dichlorophenyl-1-Bpin as substrates, did not yield any product as shown by in situ GCMS studies.
Scheme S-4. Control experiments.
Based on DFT calculations, a mechanism for the 1,2-addition of polyfluorophenylboronates to aryl aldehydes in the presence of K2CO3 as base is proposed, as shown in Scheme S-5. K2CO3 interacts with the Lewis-acidic Bpin moiety of substrate 1 to generate base adduct A, which weakens the carbon-boron bond and ultimately cleaves the BC bond along with attachment of a potassium cation to the aryl group. The resulting ArF- anion adduct B undergoes nucleophilic attack at the aldehyde carbon atom of substrate 2 to generate methanolate C. The methanolate oxygen atom then attacks the electrophilic Bpin group to obtain compound D. Transfer of K2CO3 from intermediate D to the boron atom of the more Lewis-acidic polyfluorophenyl-Bpin 1 finally closes the cycle and regenerates complex A. Thus, the primary reaction product is the O-borylated addition product E, which was detected by HRMS and NMR spectroscopy for the perfluorinated derivative.
Scheme S-5. Proposed mechanism of the 1,2-addition of polyfluorophenylboronates to aldehydes and ketones.
Chapter 4
Chapter 4 presents a novel protocol for the transition metal-free addition and annulation of polyfluoroarylboronate esters to DMF, which provides 3-aminoindoles and tertiary amines in moderate to excellent yields (Scheme S-6).
Scheme S-6. Annulation and addition reactions of polyfluorophenylboronates with DMF.
While exploring the application of this strategy in synthesis, perfluorophenylBpin reacted smoothly with ethynylarenes and DMF to afford propargylamines with moderate to excellent yields (Scheme S-7).
Scheme S-7. Three-component cross-coupling reaction for the synthesis of propargylamines.
The introductory chapter reviews the current state of mechanistic understanding of the hexadehydro-Diels-Alder (HDDA) reaction. With the rapid development of the HDDA reaction from its first discovery in 1997, the question of whether a concerted or stepwise mechanism better describes the thermally activated formation of ortho-benzyne from a diyne and a diynophile has been debated. Mechanistic and kinetic investigations were able to show that this is not a black or white situation, as minor changes can tip the balance. In chapter 2 of this thesis, the catalytic process leading from 1,11-bis(p-tolyl)undeca-1,3,8,10-tetrayne to fully-substituted naphthalene and azulene derivatives, by two different platinum-catalyzed dimerization pathways, was investigated. In chapter 3, the cannibalistic self-trapping reaction of an ortho-benzyne derivative generated from 1,11-bis(p-tolyl)undeca-1,3,8,10-tetrayne in an HDDA reaction was investigated. Without adding any specific trapping agent, the highly reactive benzyne is trapped by another bisdiyne molecule in at least three different modes. In chapter 4 direct UV/VIS spectroscopic evidence for the existence of an o-benzyne in solution is reported, and the dynamics of its formation in a photo-induced reaction are established. For this purpose, 1,11-bis(p-tolyl)undeca-1,3,8,10-tetrayne was investigated, using femtosecond transient absorption spectroscopy in the ultraviolet/visible region. In chapter 5, following the isolation and characterization of the reaction products discussed in chapter 3, further species resulting from reactions of the highly reactive ortho-benzyne derivative were identified.