Refine
Has Fulltext
- yes (27)
Is part of the Bibliography
- yes (27)
Year of publication
- 2011 (27) (remove)
Document Type
- Doctoral Thesis (27) (remove)
Keywords
- Kernspintomografie (3)
- MRI (3)
- Molekularstrahlepitaxie (3)
- NMR-Bildgebung (3)
- NMR-Tomographie (3)
- Spintronik (3)
- DFB laser (2)
- DFB-Laser (2)
- Drei-Fünf-Halbleiter (2)
- Galliumarsenidlaser (2)
Institute
- Physikalisches Institut (27) (remove)
The charge transport in disordered organic bulk heterojunction (BHJ) solar cells is a crucial process affecting the power conversion efficiency (PCE) of the solar cell. With the need of synthesizing new materials for improving the power conversion efficiency of those cells it is important to study not only the photophysical but also the electrical properties of the new material classes. Thereby, the experimental techniques need to be applicable to operating solar cells. In this work, the conventional methods of transient photoconductivity (also known as "Time-of-Flight" (TOF)), as well as the transient charge extraction technique of "Charge Carrier Extraction by Linearly Increasing Voltage" (CELIV) are performed on different organic blend compositions. Especially with the latter it is feasible to study the dynamics, i.e. charge transport and charge carrier recombination, in bulk heterojunction (BHJ) solar cells with active layer thicknesses of 100-200 nm. For a well performing organic BHJ solar cells the morphology is the most crucial parameter finding a trade-off between an efficient photogeneration of charge carriers and the transport of the latter to the electrodes. Besides the morphology, the nature of energetic disorder of the active material blend and its influence on the dynamics are discussed extensively in this work. Thereby, the material system of poly(3-hexylthiophene-2,5-diyl) (P3HT) and [6,6]-phenyl-C61 butyric acid methyl ester (PC61BM) serves mainly as a reference material system. New promising donor or acceptor materials and their potential for application in organic photovoltaics are studied in view of charge dynamics and compared with the reference system. With the need for commercialization of organic solar cells the question of the impact of environmental conditions on the PCE of the solar cells raises. In this work, organic BHJ solar cells exposed to synthetic air for finite duration are studied in view of the charge carrier transport and recombination dynamics. Finally, within the framework of this work the technique of photo-CELIV is improved. With the modified technique it is now feasible to study the mobility and lifetime of charge carriers in organic solar cells under operating conditions.
The material system of interest in this thesis are II-VI-semiconductors. The first part of this thesis focuses on the formation of self-assembled CdSe-based quantum dots (QD) on ZnSe. The lattice constants of ZnSe and CdSe differ as much as about 7\% and therefore a CdSe layer grown on top of ZnSe experiences a huge strain. The aspired strain relief constitutes in the self-assembly of QDs (i.e. a roughened layer structure). Additionally, this QD layer is intermixed with Zn as this is also a possibility to decrease the strain in the layer. For CdSe on ZnSe, in Molecular Beam Epitaxy (MBE), various QD growth procedures were analysed with respect to the resulting Cd-content of the non-stoichiometric ternary (Zn,Cd)Se. The evaluation was performed by Raman Spectroscopy as the phonon frequency depends on the Cd-content. The second part of the thesis emphasis on the interface properties of n-ZnSe on n-GaAs. Different growth start procedures of the ZnSe epilayer may lead to different interface configurations with characteristic band-offsets and carrier depletion layer widths. The analysis is mainly focused on the individual depletion layer widths in the GaAs and ZnSe. This non-destructive analysis is performed by evaluating the Raman signal which comprises of phonon scattering from the depleted regions and coupled plasmon-phonon scattering from regions with free carriers.
Understanding the mechanisms of fragmentation within silicate melts is of great interest not only for material science, but also for volcanology, particularly regarding molten fuel coolant-interactions (MFCIs). Therefore edge-on hammer impact experiments (HIEs) have been carried out in order to analyze the fracture dynamics in well defined targets by applying a Cranz-Schardin highspeed camera technique. This thesis presents the corresponding results and provides a thorough insight into the dynamics of fragmentation, particularly focussing on the processes of energy dissipation. In HIEs two main classes of cracks can be identified, characterized by completely different fracture mechanisms: Shock wave induced “damage cracks” and “normal cracks”, which are exclusively caused by shear-stresses. This dual fracture situation is taken into account by introducing a new concept, according to which the crack class-specific fracture energies are linearly correlated with the corresponding fracture areas. The respective proportionality constants - denoted “fracture surface energy densities” (FSEDs) - have been quantified for all studied targets under various constraints. By analyzing the corresponding high speed image sequences and introducing useful dynamic parameters it has been possible to specify and describe in detail the evolution of fractures and, moreover, to quantify the energy dissipation rates during the fragmentation. Additionally, comprehensive multivariate statistical analyses have been carried out which have revealed general dependencies of all relevant fracture parameters as well as characteristics of the resulting particles. As a result, an important principle of fracture dynamics has been found, referred to as the “local anisotropy effect”: According to this principle, the fracture dynamics in a material is significantly affected by the location of directed stresses. High local stress gradients cause a more stable crack propagation and consequently a reduction of the energy dissipation rates. As a final step, this thesis focusses on the volcanological conclusions which can be drawn on the basis of the presented HIE results. Therefore fragments stemming from HIEs have been compared with natural and experimental volcanic ash particles of basaltic Grimsvötn and rhyolitic Tepexitl melts. The results of these comparative particle analyses substantiate HIEs to be a very suitable method for reproducing the MFCI loading conditions in silicate melts and prove the FSED concept to be a model which is well transferable to volcanic fragmentation processes.
Magnetic resonance imaging (MRI) is a medical imaging method that involves no ionizing radiation and can be used non-invasively. Another important - if not the most important - reason for the widespread and increasing use of MRI in clinical practice is its interesting and highly flexible image contrast, especially of biological tissue. The main disadvantages of MRI, compared to other widespread imaging modalities like computed tomography (CT), are long measurement times and the directly resulting high costs. In the first part of this work, a new technique for accelerated MRI parameter mapping using a radial IR TrueFISP sequence is presented. IR TrueFISP is a very fast method for the simultaneous quantification of proton density, the longitudinal relaxation time T1, and the transverse relaxation time T2. Chapter 2 presents speed improvements to the original IR TrueFISP method. Using a radial view-sharing technique, it was possible to obtain a full set of relaxometry data in under 6 s per slice. Furthermore, chapter 3 presents the investigation and correction of two major sources of error of the IR TrueFISP method, namely magnetization transfer and imperfect slice profiles. In the second part of this work, a new MRI thermometry method is presented that can be used in MRI-safety investigations of medical implants, e.g. cardiac pacemakers and implantable cardioverter-defibrillators (ICDs). One of the major safety risks associated with MRI examinations of pacemaker and ICD patients is RF induced heating of the pacing electrodes. The design of MRI-safe (or MRI-conditional) pacing electrodes requires elaborate testing. In a first step, many different electrode shapes, electrode positions and sequence parameters are tested in a gel phantom with its geometry and conductivity matched to a human body. The resulting temperature increase is typically observed using temperature probes that are placed at various positions in the gel phantom. An alternative to this local thermometry approach is to use MRI for the temperature measurement. Chapter 5 describes a new approach for MRI thermometry that allows MRI thermometry during RF heating caused by the MRI sequence itself. Specifically, a proton resonance frequency (PRF) shift MRI thermometry method was combined with an MR heating sequence. The method was validated in a gel phantom, with a copper wire serving as a simple model for a medical implant.
This work deals with nonlinear optics with wavefront controlled ultra-short laser pulses. The effects studied are self-phase modulation due to filamentation of ultra-short laser pulses and high-order harmonic generation in a jet of noble gas. Additionally, a way to optimize the spectral brilliance of the high-order harmonic source is studied by measuring the spectrum and wavefront of the generated XUV beam.
This thesis investigated the potential of Compressed Sensing (CS) applied to Magnetic Resonance Imaging (MRI). CS is a novel image reconstruction method that emerged from the field of information theory. The framework of CS was first published in technical reports in 2004 by Candès and Donoho. Two years later, the theory of CS was published in a conference abstract and two papers. Candès and Donoho proved that it is possible, with overwhelming probability, to reconstruct a noise-free sparse signal from incomplete frequency samples (e.g., Fourier coefficients). Hereby, it is assumed a priori that the desired signal for reconstruction is sparse. A signal is considered “sparse“ when the number of non-zero elements is significantly smaller than the number of all elements. Sparsity is the most important foundation of CS. When an ideal noise-free signal with few non-zero elements is given, it should be understandably possible to obtain the relevant information from fewer Fourier coefficients than dictated by the Nyquist-Shannon criterion. The theory of CS is based on noise-free sparse signals. As soon as noise is introduced, no exact sparsity can be specified since all elements have signal intensities that are non-zero. However, with the addition of little or moderate noise, an approximate sparsity that can be exploited using the CS framework will still be given. The ability to reconstruct noisy undersampled sparse MRI data using CS has been extensively demonstrated. Although most MR datasets are not sparse in image space, they can be efficiently sparsified by a sparsifying transform. In this thesis, the data are either sparse in the image domain, after Discrete Gradient transformation, or after subtraction of a temporally averaged dataset from the data to be reconstructed (dynamic imaging). The aim of this thesis was to identify possible applications of CS to MRI. Two different algorithms were considered for reconstructing the undersampled sparse data with the CS concept. The Nonlinear Conjugate Gradient based technique with a relaxed data consistency constraint as suggested by Lustig et al. is termed Relaxed DC method. An alternative represents the Gradient or Steepest Descent algorithm with strict data consistency and is, therefore, termed the Strict DC method. Chapter 3 presents simulations illustrating which of these two reconstruction algorithms is best suited to recover undersampled sparse MR datasets. The results lead to the decision for the Strict DC method as reconstruction technique in this thesis. After these simulations, different applications and extensions of CS are demonstrated. Chapter 4 shows how CS benefits spectroscopic 19F imaging at 7 T, allowing a significant reduction of measurement times during in vivo experiments. Furthermore, it allows highly resolved spectroscopic 3D imaging in acceptable measurement times for in vivo applications. Chapter 5 introduces an extension of the Strict DC method called CS-CC (CS on Combined Coils), which allows efficient processing of sparse undersampled multi-coil data. It takes advantage of a concept named “Joint Sparsity“, which exploits the fact that all channels of a coil array detect the same sparse object weighted with the coil sensitivity profiles. The practical use of this new algorithm is demonstrated in dynamic radial cardiac imaging. Accurate reconstructions of cardiac motion in free breathing without ECG triggering were obtained for high undersampling factors. An Iterative GRAPPA algorithm is introduced in Chapter 6 that can recover undersampled data from arbitrary (Non-Cartesian) trajectories and works solely in the Cartesian plane. This characteristic makes the proposed Iterative GRAPPA computationally more efficient than SPIRiT. Iterative GRAPPA was developed in a preceding step to combine parallel imaging with CS. Optimal parameters for Iterative GRAPPA (e.g. number of iterations, GRAPPA kernel size) were determined in phantom experiments and verified by retrospectively undersampling and reconstructing a radial cardiac cine dataset. The synergistic combination of the coil-by-coil Strict DC CS method and Iterative GRAPPA called CS-GRAPPA is presented in Chapter 7. CS-GRAPPA allows accurate reconstruction of undersampled data from even higher acceleration factors than each individual method. It is a formulation equivalent to L1-SPIRiT but computationally more efficient. Additionally, a comparison with CS-CC is given. Interestingly, exploiting joint sparsity in CS-CC is slightly more efficient than the proposed CS-GRAPPA, a hybrid of parallel imaging and CS. The last chapter of this thesis concludes the findings presented in this dissertation. Future applications expected to benefit from CS are discussed and possible synergistic combinations with other existing MR methodologies for accelerated imaging are also contemplated.
The contribution of the present thesis consists of three parts. They are centered around investigating certain semiconductor heterointerfaces relevant to spin injection, exploring novel, diluted magnetic single barrier tunneling structures, and further developing diluted magnetic II-VI resonant tunneling diodes.
Die Arbeit beschäftigt sich mit der Herstellung und Charakterisierung von AlGaInP Quantenpunkten auf GaP und GaAs-Substrat. Auf Basis dieser Quantenpunkte wurden Halbleiterlaser auf GaAs hergestellt, welche bei Raumtemperatur zwischen 660 nm und 730 nm emittierten. Die Untersuchung von Breitstreifenlasern, welche aus diesen Strukturen gefertigt wurden, legen nahe, dass man mithilfe eines höheren Aluminiumanteils in größeren Quantenpunkten bei vergleichbarer Wellenlänge Laser mit besseren Eigenschaften realisieren kann. Weiterhin wurden in dieser Arbeit Quantenpunkten auf GaP-Substrat untersucht, welche in AlGaP eingebettet wurden. Da diese Quantenpunkte in Barrieren eingebettet sind, welche eine indirekte Bandlücke besitzen, ergibt sich ein nicht-trivialer Bandverlauf innerhalb dieser Strukturen. In dieser Arbeit wurden numerische 3D-Simulationen verwendet, um den Bandverlauf zu berechnen, wobei Verspannung und interne Felder berücksichtigt wurden und auch die Grundzustandswellenfunktionen ermittelt wurden. Ein eingehender Vergleich mit dem Experiment setzt die gemessenen Emissionswellenlängen und -intensitäten mit berechneten Übergangsenergien und Überlappintegralen in Verbindung.
Stoffe mit schnell zerfallendem Magnetresonanz (MR)-Signal sind mit herkömmlichen MR- Sequenzen nicht darstellbar. Solche Stoffe haben meist starke Bindungen, wie im menschlichen Körper beispielsweise Sehnen, Bänder, Knochen oder Zähne. In den letzten Dekaden wurden spezielle Sequenzen mit ultrakurzer Echozeit entwickelt, die Signale von diesen Stoffen messen können. Messungen mit ultrakurzen Echozeiten eröffnen der Kernspintomographie neue Anwendungsgebiete. In dieser Doktorarbeit werden die in der Literatur bekannten Methoden zur Messung mit ultrakurzen Echozeiten untersucht und evaluiert. Es werden zwei neue, in dieser Arbeit entwickelte Ansätze vorgestellt, die es zum Ziel haben, bestehende Probleme der vorhandenen Methoden bei robuster Bildqualität zu lösen, ohne auf Hardwareänderungen am Kernspintomographen angewiesen zu sein. Die ’Gradient Optimized Single Point imaging with Echo time Leveraging’ (GOSPEL) Sequenz ist eine Single-Point-Sequenz, die im Vergleich zu den bekannten Single-Point-Sequenzen eine stark reduzierte Echozeit ermöglicht. Es wird gezeigt, dass dadurch ein deutlich besseres Signalzu-Rausch-Verhältnis (SNR) von Stoffen mit schnell zerfallendem Signal erreicht wird. Das Problem der sehr langen Messzeit bei Single-Point-Verfahren wird mit der ’Pointwise Encoding Time reduction with Radial Acquisition’ (PETRA) Sequenz gelöst. Bei diesem Ansatz wird der k-Raum-Außenbereich radial und das k-Raum-Zentrum single-point-artig abgetastet. Durch die Kombination beider Akquisitionsstrategien ist eine schnelle und robuste Bildgebung mit ultrakurzer Echozeit und ohne Hardwareänderungen möglich. Wie bei anderen Ansätzen sind bei der PETRA-Sequenz die Bildgebungsgradienten zum Anregungszeitpunkt bereites angeschaltet. Es wird untersucht, welchen Einfluss ungewollte Schichtselektionen auf die Bildgebung haben können und ein Korrekturalgorithmus entwickelt, mit dem sich dadurch entstehende Artefakte im Bild beheben lassen. Die Limitationen des Korrekturalgorithmus sowie mögliche Artefakte der PETRA-Sequenz werden untersucht und diskutiert. Erste Anwendungsbeispiele der PETRA-Sequenz bei verschiedenen Feldstärken und Applikationen werden demonstriert. Wie bei anderen Sequenzen mit ultrakurzen Echozeiten sind die Gradientenaktivitäten bei der PETRA- und GOSPEL-Sequenz gering, wodurch die Messung sehr leise sein kann. Lautstärkemessungen zeigen, dass bei Messungen mit der PETRA-Sequenz der Geräuschpegel um nur ein bis fünf dB(A) im Vergleich zum Hintergrundgeräuschpegel steigt. Es wird demonstriert, dass sich dadurch neue Anwendungsgebiete eröffnen könnten. Vergleichsmessungen zwischen einer T1-gewichteten PETRA- und einer MPRAGE-Messung weisen Bilder auf, die in Kontrast, Auflösung, SNR und Messzeit vergleichbar sind. Mit den in dieser Arbeit entwickelten Methoden konnten Probleme bestehender Ansätze gelöst und offene Fragen beantwortet werden. Die Ergebnisse können helfen, Applikationen von Sequenzen mit ultrakurzen Echozeiten in der klinischen Routine weiter zu etablieren.
Die Magnet-Resonanz (MR)-Bildgebung ist mit vielfältigen Anwendungen ein nicht mehr wegzudenkendes Instrument der klinischen Diagnostik geworden. Dennoch führt die stark limitierte Messzeit häufig zu einer Einschränkung der erzielbaren räumlichen Auflösung und Abdeckung, einer Beschränkung des Signal-zu-Rauschverhältnis (Signal-to-Noise Ratio) (SNR) sowie einer Signalkontamination durch benachbartes Gewebe. Bereits bestehende Methoden zur Reduktion der Akquisitionszeit sind die partielle Fourier (PF)-Bildgebung und die parallele Bildgebung (PPA). Diese unterscheiden sich zum einen im Schema zur Unterabtastung des k-Raums und zum anderen in der verwendeten Information zur Rekonstruktion der fehlenden k-Raum-Daten aufgrund der beschleunigten Akquisition. Während in der PPA die unterschiedlichen Sensitivitäten einer Mehrkanal-Empfangsspule zur Bildrekonstruktion verwendet werden, basiert die PF-Bildgebung auf der Annahme einer langsamen Variation der Bildphase. Im ersten Abschnitt dieser Arbeit wurde das Konzept der Virtuellen Spulendekonvolutions (Virtual Coil Deconvolution) (VIDE)-Technik vorgestellt, das das gleiche Schema der Unterabtastung des k-Raums wie die konventionelle PPA verwendet, aber anstelle der Spulensensitivität die Bildphase als zusätzliche Information zur Herstellung der fehlenden Daten der beschleunigten Bildgebung verwendet. Zur Minimierung der Rekonstruktionsfehler und der Rauschverstärkung in der VIDE-Technik wurde ein optimiertes Akquisitionsschema entwickelt. Die Kombination der PPA und PF-Bildgebung zur Beschleunigung der MR-Bildgebung wird durch das unterschiedliche Unterabtastschema erschwert. Wie Blaimer et al. in ihrer Arbeit gezeigt haben, kann das Prinzip der VIDE-Technik auf Mehrkanal-Spulen übertragen werden, sodass mit dieser Methode die PPA und die PF-Bildgebung optimal vereint werden können. Dadurch kann die Rauschverstärkung aufgrund der Spulengeometrie ohne zusätzliche Messungen deutlich reduziert werden. Obwohl die Abtastung des k-Raums in der MR-Bildgebung sehr variabel gestaltet werden kann, wird bis heute nahezu ausschließlich die regelmäßige k-Raum-Abtastung in der klinischen Bildgebung verwendet. Der Grund hierfür liegt, neben der schnellen Rekonstruktion und der einfachen Gestaltung der Variation des Bild-Kontrasts, in der Robustheit gegen Artefakte. Allerdings führt die regelmäßige k-Raum-Abtastung zu einer hohen Signalkontamination. Die Optimierung der SRF durch nachträgliches Filtern führt jedoch zu einem SNR-Verlust. Die dichtegewichtete (DW-) Bildgebung ermöglicht die Reduktion der Signal-Kontamination bei optimalem SNR, führt aber zur einer Reduktion des effektiven Gesichtsfelds (FOV) oder einer Erhöhung der Messzeit. Letzteres kann durch eine Kombination der PPA und DW-Bildgebung umgangen werden. Der zweite Teil dieser Arbeit befasste sich mit neuen Aufnahme- und Rekonstruktionsstrategien für die DW-Bildgebung, die eine Erhöhung des FOVs auch ohne Einsatz der PPA erlauben. Durch eine Limitierung der minimalen k-Raum-Abtastdichte konnte durch eine geringfügige Reduktion des SNR-Vorteils der DW-Bildgebung gegenüber der kartesischen, gefilterten Bildgebung eine deutliche Verringerung der Artefakte aufgrund der Unterabtastung in der DW-Bildgebung erreicht werden. Eine asymmetrische Abtastung kann unter der Voraussetzung einer homogenen Bildphase das Aliasing zusätzlich reduzieren. Durch die Rekonstruktion der DW-Daten mit der Virtuelle Spulendekonvolution für die effektive DW-Bildgebung (VIDED)-Bildgebung konnten die Artefakte aufgrund der Unterabtastung eliminiert werden. In der 3d-Bildgebung konnte durch Anwendung der modifizierten DW-Bildgebung eine Steigerung des FOVs in Schichtrichtung ohne Messzeitverlängerung erreicht werden. Die nicht-kartesische k-Raum-Abtastung führt im Fall einer Unterabtastung zu deutlich geringeren, inkohärenten Aliasingartefakten im Vergleich zur kartesischen Abtastung. Durch ein alternierendes DW-Abtastschema wurde eine an die in der MR-Mammografie verwendete Spulengeometrie angepasste k-Raum-Abtastung entwickelt, das bei gleicher Messzeit die räumliche Auflösung, das SNR und das FOV erhöht. Im dritten Teil dieser Arbeit wurde die Verallgemeinerung der DW-Bildgebung auf signalgewichtete Sequenzen, d.h. Sequenzen mit Magnetisierungspräparation (Inversion Recovery (IR), Saturation Recovery (SR)) sowie Sequenzen mit einer Relaxation während der Datenaufnahme (Multi-Gradienten-Echo, Multi-Spin-Echo) vorgestellt, was eine Steigerung der Bildqualität bei optimalem SNR erlaubt. Die Methode wurde auf die SR-Sequenz angewendet und deren praktischer Nutzen wurde in der Herz-Perfusions-Bildgebung gezeigt. Durch die Verwendung der in dieser Arbeit vorgestellten Technik konnte eine Reduktion der Kontamination bei einem SNR-Gewinn von 16% im Vergleich zur konventionellen, kartesischen Abtastung bei gleicher Messzeit erreicht werden.
The charge transport properties of disordered organic and nanocrystalline inorganic semiconductors as well as their combinations have been investigated in regard to the charge carrier density employing field-effect-transistor structures. The results were discussed in the framework of different theoretical models. In organic semiconductors the presence of positional and energetic disorder determines the transport of charges through the respective thin films and interfaces. The electronic disorder is characterized by statistically distributed and localized transport sites which were shown to form a Gaussian density of states. In this electronic environment the charge transport occurs via thermally activated hopping between the localized states and therefore depends on the temperature and the local electric field. Particularly, a dependence of the carrier mobility on the charge carrier concentration is observed due to filling of tail states. Inorganic nanocrystalline semiconductors, however, are expected to present a different electronic structure: Within the volume of a nanocrystallite the semiconductor is assumed to reflect the electronic properties of the crystalline bulk material. However, the outer shell is characterized by a relatively large density of surface states and correspondingly bending of the energy bands, which creates an energetic barrier between the adjacent particles. In a nanocrystalline thin film this characteristic can be rate-limiting for the inter-particle carrier transport as reflected by reduced charge carrier mobility. The effective barrier height can be reduced by controlled doping of the nanocrystals which results in improved majority carrier transfer rates across the barrier. However, doping results in the simultaneous increase of the defect density and consequently to enhanced limitation of the mobility due to charge carrier scattering. In the experiments, thin films of commercially available p- and n-type organic semiconductors (P3HT, and two derivatives of PCBM) were investigated in field-effect transistor structures. Further, sol-gel synthesized n-type nanocrystalline-ZnO (nc-ZnO) with varied doping concentration (agent: aluminum Al$^{3+}$) was introduced in order to establish an alternative way of customizing the charge transport properties of the neat material and in combination with the organic polymer semiconductor P3HT.
In this thesis a systematic analysis of the correlation effects between lattice dynamics and magnetism in the Multiferroic Manganites RMnO3 with Pnma structure was conducted. For this task, Raman and FT-IR Spectroscopy were employed for an investigation of all optically accessible lattice vibrations, i.e. phonons. To study the correlation effects as well as their specific connections to symmetry and compositional properties of the Multiferroic Manganites, the polarisation and temperature dependence of the phonons were considered explicitly. In combination with lattice dynamical calculations based on Density Functional Theory, two coupling effects - Spin-Phonon Coupling and Electromagnon-Phonon Coupling - were systematically analysed.
Der große Fortschritt der Halbleitertechnologie ermöglichte es in den letzten Jahren quantenoptische Phänomene nicht mehr nur ausschließlich an Atomen, sondern auch in einer Festkörpermatrix zu beobachten. Von besonderem Interesse sind dabei Phänomene der Licht-Materie-Wechselwirkung im Kontext der Quantenelektrodynamik in Kavitäten. Die äußerst aktive Forschung auf diesem Gebiet rührt daher, dass diese Phänomene bei der Realisierung neuartiger Lichtquellen für die Quanteninformationstechnologie benötigt werden. Die Verwirklichung von solchen speziellen Lichtquellen auf Halbleiterbasis besitzt entscheidende Vorteile im Hinblick auf die praktische Anwendbarkeit aufgrund der potentiell hohen Skalierbarkeit und Effizienz. Jedoch kann die erforderliche Licht-Materie-Wechselwirkung nur in qualitativ sehr hochwertigen Halbleiterstrukturen mit quasi nulldimensionalem Ladungsträger- und Lichteinschluss erfolgen. Hierbei wurden in den letzten Jahren enorme technologische Fortschritte bei der Prozessierung von Mikrokavitäten mit Quantenpunkten in der aktiven Schicht sowie bei der Beobachtung der gewünschten Licht-Materie-Wechselwirkung erzielt. Allerdings erfolgten diese Untersuchungen in erster Linie an optisch mithilfe eines externen Lasers angeregten Strukturen, wohingegen für die Praxis ein elektrischer Betrieb wünschenswert ist. Die für die elektrische Anregung von solchen Mikrostrukturen notwendige Kontaktierung kann darüber hinaus zur effizienten Manipulation der Emissionseigenschaften der Quantenemitter mittels eines elektrischen Feldes eingesetzt werden. Vor diesem Hintergrund werden im Rahmen dieser Arbeit die optischen und elektrischen Eigenschaften von kontaktierten Quantenpunkt-Mikrosäulenkavitäten eingehend untersucht. Ausgangspunkt dieser Mikrokavitäten sind planare Schichtstrukturen auf der Basis von GaAs und AlAs mit InGaAs-Quantenpunkten mit variierendem Indiumgehalt in der aktiven Schicht. Der Schwerpunkt der Untersuchungen lag hierbei auf vertikal elektrisch kontaktierten Mikrosäulenresonatoren, deren Aufbau vertikal emittierenden Laserdioden ähnelt. Die Besonderheit der neuartigen Kontaktierung liegt darin, dass aufgrund der Strominjektion durch die Seitenwände im oberen Bereich des Mikrosäulenresonators die Facette der Struktur frei von jeglichem absorbierenden Material gehalten wird. Hierdurch kann eine effiziente Lichtauskopplung gewährleistet werden. Des Weiteren wurde auch ein Verfahren zur seitlichen Kontaktierung von undotierten Mikrosäulenresonatoren entwickelt und optimiert, was eine spezielle Manipulation der Quantenpunktemission in einem lateralen elektrischen Feld erlaubt. Als Untersuchungsmethode wird bei allen Experimenten in erster Linie die Mikrolumineszenzspektroskopie bei tiefen Temperaturen verwendet und durch die Methode der Photostromspektroskopie sowie Autokorrelationsmessungen erster und zweiter Ordnung ergänzt ...
In dieser Arbeit habe ich mich hauptsächlich mit der optischen Spektroskopie im sichtbaren bis nahinfraroten Bereich an Akzeptoren für organische bulk-heterojunction Polymer-Fulleren Solarzellen beschäftigt. Dabei führte ich sowohl Untersuchungen an reinen Fullerenproben als auch Gemischen dieser mit Polymeren durch. Ergänzend sind Messungen zur Morphologie, den Spinzuständen und der Solarzellenleistung erfolgt. Erreicht werden sollte, die generelle Eignung neuartiger Akzeptoren für organische Solarzellen festzustellen, die photoinduzierten spektroskopischen Signaturen von optisch angeregten Anionen auf Fullerenen verschiedener Größe zu finden und zu interpretieren sowie zum Abschluss die Abläufe der Ladungsträgergeneration in Polymer:Lu3N@C80 Solarzellen nachzuvollziehen und dadurch die Ursache der vergleichsweise geringen Stromdichte in diesen Zellen zu verstehen, die 25 % geringer ist als in P3HT:PC60BM Solarzellen. Die Ergebnisse sind, dass C70-C70 Dimer Fullerene sehr gute Akzeptoren darstellen, die neben einer etwas besseren Absorption als C60 basierte Akzeptoren im Bereich um 500 nm sehr gute Fähigkeiten als Elektronenakzeptoren zeigen. Die Messung an Fullerenen verschiedener Größe, um Anionensignaturen zu finden, hat deutliche Signaturen für C60- bei 1.18 eV und für C70- bei 0.92 eV erbracht. Weniger einfach zu finden und interpretieren sind die Signaturen von C80- und C84-. Aufgrund der geringen Signalstärke sowie spezieller Eigenheiten der zur Verfügung stehenden Fullerene konnte ich nur einen ungefähren Bereich von 0.7~eV bis 0.4~eV für die Anionensignaturen abschätzen. Allerdings zeigt sich für alle Fullerene eine Rotverschiebung der Anionensignaturen hin zu niedrigeren Energien mit steigender Zahl der Kohlenstoffatome pro Fulleren. Die umfangreichste Untersuchung habe ich an dem Molekül Lu3N@C80 in seiner Funktion als Elektronenakzeptor in P3HT:Lu3N@C80 Solarzellen gemacht. Während das Molekül in Kombination mit P3HT eine hohe Leerlaufspannung von 835 mV erzeugt, ergeben diese Zellen geringere Stromdichten. Mein Ziel war es, die Prozesse zu identifizieren und zu verstehen, die dafür verantwortlich zeichnen. Aus der Kombination verschiedener Messmethoden, ergänzt mit generellen Erkenntnissen zu endohedralen Fullerenen aus der Literatur, ließ es zu, einen intramolekularen Elektronentransfer von den Lutetiumatomen innerhalb des C80 auf das Fulleren als Ursache zu identifizieren. Die in dieser Arbeit gewonnenen Daten liefern weitere Indizien, dass die Verwendung von C70 basierten Fullerenen eine gute Option zur Verbesserung des Wirkungsgrads von organischen Solarzellen sein kann, trotz der höheren Herstellungskosten. Die gefundenen Anionensignaturen auf den Fullerenen bieten einen weiteren Ansatz, die Anregungsabläufe in verschiedenen bulk-heterojunctions über spektroskopische Messungen nachzuvollziehen. Abschließend habe ich mit meinen Messungen an Lu3N@C80 einen generell zu beachtenden Effekt aufgezeigt, der bei der zukünftigen Synthese funktionaler Akzeptoren ähnlicher Art berücksichtigt werden sollte, um eine optimale Leistungsfähigkeit solcher Moleküle zu gewährleisten. Während die Projekte über die Dimer Akzeptoren und das Lu3N@C80 Molekül abgeschlossen wurden, sind bei der Untersuchung der Anionen, speziell auf großen Fullerenen, noch Fragen offen, und es wären zusätzliche Nachweise wünschenswert. Dies könnte mit spinsensitiven und zeitaufgelösten Messmethoden, die am Lehrstuhl vorhanden sind, an den hier schon vorgestellten Materialien erreicht werden. Eine weitere Möglichkeit wäre es zu versuchen, PC81$BM zu bekommen und dies zu untersuchen, auch in Gemischen mit noch mehr verschiedenen Polymeren mittels photoinduzierter Absorption.
In this work the epitaxial growth and characterization of the half-metallic ferromagnet NiMnSb was presented. NiMnSb crystallizes in the C1b structure which is similar to the zinc blende structure from widely used III-V semiconductors. One special property of NiMnSb is the theoretical 100% spin-polarization at the Fermi edge. This makes it a perfect candidate for spintronic experiments and the material of choice for building novel spintronic devices. Another important topic in this work were the magnetic properties of NiMnSb, especially the low magnetic damping of the grown thin films. All grown layers were fabricated with the technique of MBE. The layer stacks for all different experiments and devices were grown on InP substrate in (001) or (111)B orientation. Before the NiMnSb layer a buffer layer of undoped (In,Ga)As was grown. Additional for some samples on InP(111)B, a Si doped (In,Ga)As layer was grown on top of the undoped (In,Ga)As layer. The dopant concentration of this n-doped layer was determined by ETCH-CV. All layers were investigated by structural and the NiMnSb layer additional by magnetic properties. For the structural investigation the in-situ technique RHEED and ex-situ tool HRXRD were used. RHEED observations showed a good quality of the grown buffer and half-metallic ferromagnet layers on both orientations. These results were strengthened by the HRXRD measurement. The vertical lattice constant could be determined. The received value of a(NiMnSb_vertical) = 5.925 Å for NiMnSb on InP(001) is in good agreement to the value a(NiMnSb_Lit) = 5.903 Å found in literature [Cas55]. For NiMnSb on InP(111)B a vertical lattice constant of a(NiMnSb_vertikal) = 6.017 Å could be determined. The horizontal lattice constant of the buffer and the half-metallic ferromagnet layer could be determined as the same of the substrate. For NiMnSb this conclusion is only valid up to a thickness of ≈40nm. To increase this maximum thickness, NiMnSb samples were grown on InP(001) substrates and capped with Ti/Au layers. Afterwards a reciprocal space map of the (533) reflex was drawn with GIXRD at the synchrotron beamline BW2 of HASYLAB [Kum07]. It has been shown that the critical thickness is more than doubled by depositing a Ti/Au capping directly after growth of NiMnSb without breaking the ultrahigh vacuum (UHV). The magnetic properties were determined with FMR experiments and SQUID measurements. The received magnetic damping parameter α from a 40nm thick NiMnSb layer on InP(001) could be determined to 3.19e−3 along [1-10]. The resulting line width of our NiMnSb layers on InP(001) is more than 4.88 times smaller than measured before [Hei04]. Another result is the direction dependence of the damping. It has been measured that the difference of the damping is changed by more than 42% when rotating the applied field by 45° from [1-10] to [100].With SQUID we measured a saturation magnetization of a 40nm thick NiMnSb layer as 4µB. NiMnSb layers on InP(111)B substrate where also measured with FMR with a surprising result. These layers not only showed a decreasing in the anisotropy field with increasing thickness but also an uniaxial anisotropy. This behaviour can be explained with defects on these samples. With an AFM triangle-like defects were measured. These defects originated from the buffer layer and influenced the magnetic properties. Another part of this work is dedicated to the behaviour of NiMnSb at temperatures around 80K. With our samples, no phase transition can be observed in the data of the Hall, anomalous Hall term and resistivity. The last part of this work discusses different spintronic devices build with our NiMnSb layers. In a first device the magnetization acts on the current. This Giant Magneto Resistance (GMR) device consisted of InP:S(001) - 180nm undoped (In,Ga)As - 40nm NiMnSb - 10nm Cu - 6nm NiFe - 10nm Ru in current perpendicular to plane (CPP) geometry. We received a Magneto-Resistance-Ratio of 3.4%. In a second device the current acts on the magnetization and makes use of the spin torque phenomena. This so called Spin Torque Oscillator (STO) emitted frequencies in the GHz range (13.94GHz - 14.1GHz). The last fabricated device is based on the magnetic vortex phenomena. For switching the core polarity the gyrotropic frequencies f + = 254MHz f − = 217MHz and a total static magnetic field of only mµ0H = 65mT were necessary. The reversal efficiency has been determined as better than 99% [Lou09].
For the realization of a programmable logic device, or indeed any nanoscale device, we need a reliable method to probe the magnetization direction of local domains. For this purpose we extend investigations on the previously discovered tunneling anisotropic magneto resistance effect (TAMR) by scaling the pillar size from 100 µm down to 260 nm. We start in chapter 4 with a theoretical description of the TAMR effect and show experimental data of miniaturized pillars in chapter 5. With such small TAMR probes we are able to locally sense the magnetization on the 100 nm scale. Sub-micron TAMR and anisotropic magneto resistance (AMR) measurements of sub-millimeter areas show that the behavior of macroscopic (Ga,Mn)As regions is not that of a true macrospin, but rather an ensemble average of the behavior of many nearly identical macrospins. This shows that the magnetic anisotropies of the local regions are consistent with the behavior extracted from macroscopic characterization. A fully electrically controllable read-write memory device out the ferromagnetic semiconductor (Ga,Mn)As is presented in chapter 6. The structure consists of four nanobars which are connected to a circular center region. The first part of the chapter describes the lithography realization of the device. We make use of the sub-micron TAMR probes to read-out the magnetization state of a 650 nm central disk. Four 200 nm wide nanobars are connected to the central disk and serve as source and drain of a spin-polarized current. With the spin-polarized current we are able to switch the magnetization of the central disk by means of current induced switching. Injecting polarized holes with a spin angular momentum into a magnetic region changes the magnetization direction of the region due to the p-d exchange interaction between localized Mn spins and itinerant holes. The magnetization of the central disk can be controlled fully electrically and it can serve as one bit memory element as part of a logic device. In chapter 7 we discuss the domain wall resistance in (Ga,Mn)As. At the transition from nanobars to central disk we are able to generate 90° and 180° domain walls and measure their resistance. The results presented from chapter 5 to 7 combined with the preexisting ultracompact (Ga,Mn)As-based memory cell of ref. [Papp 07c] are the building blocks needed to realize a fully functioning programmable logic device. The work of ref. [Papp 07c] makes use of lithographically engineered strain relaxation to produce a structure comprised of two nanobars with mutually orthogonal uniaxial easy axes, connected by a narrow constriction. Measurements showed that the resistance of the constriction depends on the relative orientation of the magnetization in the two bars. The programmable logic device consists of two central disks connected by a small constriction. The magnetization of the two central disks are used as the input bits and the constriction serves as the output during the logic operation. The concept is introduced in the end of chapter 6 and as an example for a logic operation an XOR gate is presented. The functionality of the programmable logic scheme presented here can be straightforwardly extended to produce multipurpose functional elements, where the given geometry can be used as various different computational elements depending on the number of input bits and the chosen electrical addressing. The realization of such a programmable logic device is shown in chapter 8, where we see that the constriction indeed can serve as a output of the logic operation because its resistance is dependent on the relative magnetization state of both disks. Contrary to ref. [Papp 07c], where the individual magnetic elements connected to the constriction only have two non-volatile magnetic states, each disk in our scheme connected to the constriction has four non-volatile magnetic states. Switching the magnetization of a central disk with an electrical current does not only change the TAMR read-out of the respective disk, it also changes the resistance of the constriction. The resistance polar plot of the constriction maps the relative magnetization states of the individual disks. The presented device design serves as an all-electrical, all-semiconductor logic element. It combines a memory cell and data processing in a single monolithic paradigm.
Im Rahmen dieser Arbeit wurden mit Hilfe von hochaufgelöster ARPES die Auswirkungen verschiedener intrinsischer und extrinsischer Einflüsse auf zweidimensionale elektronische Zustände untersucht: Eine Änderung der Morphologie aufgrund einer (2 × 1)-Rekonstruktion bewirkt beim OFZ von Au(110) im Vergleich zur nicht-rekonstruierten Oberfläche eine Verschiebung der Bindungsenergie von ca. 700meV. Dieses Verhalten wurde in LDA-slab-layer-Rechungen reproduziert und durch gezielte Modifikation der Oberflächenstruktur sowie kontrollierte Beeinflussung des OFZ durch die Adsorbate Ag, Na und Au verstanden. Eine Linienbreitenanalyse der sehr scharfen Minoritäts-QWS in dünnen Fe- Filmen auf W(110) ermöglichte eine Abschätzung der Elektron-Elektron- Wechselwirkung und eine Bestimmung der Elektron-Phonon-Kopplungskonstanten. Die starke Anisotropie der Dispersion der QWS ist des weiteren durch den Vergleich mit GGA-slab-layer-Rechnungen als intrinsische Eigenschaft dieser Zustände identifiziert worden. Mit Hilfe eines erweiterten PAM wurde zudem die k⊥-Dispersion des, den QWS zugrunde liegenden Volumenbandes, bestimmt. Die spinabhängigen Einflussfaktoren Spin-Orbit- und Austausch-Wechselwirkung sowie deren Kombination wurden am Beispiel des OFZ von dünnen Au-Filmen auf Ni(111), sowie an QWS in dünnen Ni-Filmen auf W(110) untersucht. Die in SPR-KKR-Photoemissionrechungen gefundene leichte Asymmetrie der spinaufgelösten Dispersion wurde in den spinintegrierten ARPESMessungen nicht beobachtet. Ab 9ML Au-Bedeckung konnte die Rashba- Aufspaltung des OFZ aufgelöst werden. Eine durch das W(110)-Substrat induzierte Rashba-Aufspaltung wurde bei sp-artigen QWS in dünnen Ni- Filmen beobachtet, welche jedoch mit weiteren Strukturen hybridisieren, was eine eindeutige Aussage über die tatsächliche Natur der Aufspaltung erschwert.
Ein Ziel der Arbeit war die Entwicklung spektral monomodiger DFB-Lasern im Wellenlängenbereich von 3,0-3,4µm. Diese sollten auf spezielle Anwendungen in der Absorptionsspektroskopie an Kohlenwasserstoffen gezielt angepasst werden. Hierfür wurden zwei auf GaSb-Material basierende Lasertypen untersucht - Interbandkaskadenlaser (ICL) und Diodenlaser mit quinären AlGaInAsSb-Barrieren- und Wellenleiter-Schichten. Für das ICL-Material wurde ein DFB-Prozess basierend auf vertikalen Seitengittern entwickelt. Dieser Ansatz ermöglichte monomodigen Laserbetrieb bei Realisierung der Laser mit Kopplungsgitter in nur einem Ätzschritt und ohne epitaktischen Überwachstumsschritt. Maximal mögliche Betriebstemperaturen von ~0°C für die auf dem verfügbaren epitaktischen Material entwickelten Laser wurden bestimmt. Eine Diskussion der thermischen Eigenschaften der Laser deckte Gründe für die Limitierung der Betriebstemperatur auf. Möglichkeiten zur Optimierung der Leistungsfähigkeit und Steigerung der Betriebstemperatur beim ICL-Ansatz wurden hierauf basierend vorgestellt. Als kritischster Parameter wurde hier die epitaxiebestimmte Temperaturstabilität der Laserschwelle ausgemacht. Weitere Entwicklungen umfassten die Herstellung von DFB-Lasern mit dem erwähnten Diodenlasermaterial mit quinären Barrieren. Es kam eine Prozessierung der Bauteile ohne Überwachstum unter Verwendung von lateralen Metallgittern zur Modenselektion zum Einsatz. Die Bestimmung optischer Parameter zur Entwicklung von Lasern mit guter DFB-Ausbeute wurde für das Epitaxiematerial mit quinären Barrieren >3,0µm von Wellenleiter-Simulationen unterstützt. Die Definition der Gitterstrukturen wurde auf niedrige Absorptionsverluste optimiert. So hergestellte Laser zeigten exzellente Eigenschaften mit maximalen Betriebstemperaturen im Dauerstrichbetrieb von >50°C und spektral monomodiger Emission um 2,95µm mit Seitenmodenunterdrückungen (SMSR) bis 50dB. Diesem Konzept entsprechend wurden DFB-Laser speziell für die Acetylen-Detektion bei Wellenlängen von 3,03µm und 3,06µm entwickelt. Die für ~3,0µm entwickelte und erfolgreich angewendete DFB-Prozessierung wurde daraufhin auf den Wellenlängenbereich bis 3,4µm angepasst. Ein Prozesslauf mit verbesserter Wärmeabfuhr, ohne die Verwendung eines Polymers, wurde entwickelt. Es konnten DFB-Laser hergestellt werden, die fast den gesamten Wellenlängenbereich von 3,3-3,4µm abdeckten. Maximale Betriebstemperaturen dieser Laser lagen bei >20°C in Dauerstrichbetrieb bei ausgezeichneten spektralen Eigenschaften (SMSR 45dB). Spezielle Bauteile im Bereich 3,34-3,38µm, u.a. für die Detektion von Methan, Ethan und Propan, wurden entwickelt. Die in dieser Arbeit auf Diodenlasermaterial mit quinären Barrieren entwickelten DFB-Laser definieren für den gesamten Wellenlängenbereich von 2,8-3,4µm den aktuellen Stand der Technik für monomodige Laseremission durch direkte strahlende Übergänge. Sie stellen außerdem für den Wellenlängenbereich von 3,02-3,41µm die einzigen veröffentlichten DFB-Laser in cw-Betrieb bei Raumtemperatur dar. Eine maximale monomodige Emissionswellenlänge für Diodenlaser von 3412,1nm wurde erreicht. Ein weiteres Ziel der Arbeit war die Entwicklung weit abstimmbarer Laser von 3,3-3,4µm zur Ermöglichung erweiterter Anwendungen in der Kohlenwasserstoff-Gassensorik. Hierfür wurde ein Konzept zweisegmentiger Laser mit binären, überlagerten Gittern verwendet. Für diese sogenannten BSG-Laser konnte durch Simulationen unterstützt der Einfluss des kritischen Parameters der Phase der Bragg-Moden an den Facetten untersucht werden. Ein dementsprechend phasenoptimiertes Design der Gitterstrukturen wurde in den Segmenten der Laser angewendet. Simulationen des Durchstimmverhaltens der Laser wurden diskutiert und Einschätzungen über das reale Verhalten in hergestellten Bauteilen gegeben. Die entwickelten Laser wiesen Emission in bis zu vier ansteuerbaren, monomodigen Wellenlängenkanälen auf. Sie zeigten ein den Simulationen entsprechendes, sehr gutes Durchstimmverhalten in den Kanälen (bis zu ~30nm). Die Entwicklung eines bestimmten Lasers in dieser Arbeit war speziell auf die industrielle Anwendung in einem Sensorsystem mit monomodigen Emissionen um 3333nm und 3357nm ausgelegt. Für diese Wellenlängenkanäle wurden spektrale Messungen mit hohem Dynamikbereich gemacht. Mit SMSR bis 45dB war eine hervorragende Anwendbarkeit in einem Sensorsystem gewährleistet. Der Aufbau mit nur zwei Lasersegmenten garantiert eine einfache Ansteuerung ohne komplexe Elektronik. Die in dieser Arbeit entwickelten weit abstimmbaren Laser stellen die bisher langwelligsten, monolithisch hergestellten, weit abstimmbaren Laser dar. Sie sind außerdem die bislang einzigen zweisegmentigen BSG-Laser, die in durch simultane Stromveränderung durchstimmbaren Wellenlängenkanälen ein Abstimmverhalten mit konstant hoher Seitenmodenunterdrückung und ohne Modensprünge zeigen.
Das Ziel dieser Arbeit war es, Methoden und Techniken für die morphologische und funktionelle Bildgebung der menschlichen Lunge mittels Kernspintomographie bei Feldstärken von 0,2 Tesla und 1,5 Tesla zu entwickeln und zu optimieren. Bei 0,2 Tesla wurde mittels der gemessenen Relaxationszeiten T1 und T2* eine 2D und eine 3D FLASH Sequenz zur Untersuchung der Lungenmorphologie optimiert. Sauerstoffgestützte Messungen der Relaxationszeiten T1 und T2* sowie eine SpinLabeling Sequenz liefern funktionelle Informationen über den Sauerstofftransfer und die Perfusion der Lungen. Bei 1,5 Tesla wurde die Lungenperfusion mittels MR-Kontrastmittel mit einer 2D und einer 3D Sequenz unter Verwendung der Präbolus Technik quantifiziert. Zudem wurden zwei MR-Navigationstechniken entwickelt, die es ermöglichen Lungenuntersuchungen unter freier Atmung durchzuführen und aus den Daten artefaktfreie Bilder zu rekonstruieren. Diese Techniken können in verschiedenste Sequenzen für die Lungenbildgebung implementiert werden, ohne dass die Messzeit dadurch signifikant verlängert wird.
Since the discovery of spin torque in 1996, independently by Berger and Slonczewski, and given its potential impact on information storage and communication technologies, (e.g. through the possibility of switching the magnetic configuration of a bit by current instead of a magnetic field, or the realization of high frequency spin torque oscillators (STO), this effect has been an important field of spintronics research. One aspect of this research focuses on ferromagnets with low damping. The lower the damping in a ferromagnet, the lower the critical current that is needed to induce switching of a spin valve or induce precession of its magnetization. In this thesis ferromagnetic resonance (FMR) studies of NiMnSb layers are presented along with experimental studies on various spin-torque (ST) devices using NiMnSb. NiMnSb, when crystallized in the half-Heusler structure, is a half-metal which is predicted to have 100% spin polarization, a consideration which further increases its potential as a candidate for memory devices based on the giant magnetoresistance (GMR) effect. The FMR measurements show an outstandingly low damping factor for NiMnSb, in low 10-3 range. This is about a factor of two lower than permalloy and well comparable to lowest damping for iron grown by molecular beam epitaxy (MBE). According to theory the 100% spin polarization properties of the bulk disappear at interfaces where the break in translational symmetry causes the gap in the minority spin band to collapse but can remain in other crystal symmetries such as (111). Consequently NiMnSb layers on (111)(In,Ga)As buffer are characterized in respect of anisotropies and damping. The FMR measurements on these samples indicates a higher damping that for the 001 samples, and a thickness dependent uniaxial in-plane anisotropy. Investigations of the material for device use is pursued by considering sub-micrometer sized elements of NiMnSb on 001 substrates, which were fabricated by electron-beam lithography and measured by ferromagnetic resonance. The damping remains in the low 10-3 range as determined directly by extracting the Gilbert damping from the line width. Additionally magnetostatic modes are observed in arrays of elements, which is further evidence of high material quality of the samples. By sputtering various metals on top of the NiMnSb, spin pumping from the ferromagnet into the non-magnetic layer is investigated. After these material investigations, pseudo-spin-valves using NiMnSb as one of the ferromagnet, in combination with Permalloy were fabricating using a self-aligned lithography process. These samples show a GMR ratio of 3.4% at room temperature and almost double at low temperature, comparing favourably to the best single stack GMR structures reported to date. Moreover, current induced switching measurements show promisingly low current densities are necessary to change the magnetic orientation of the free layer. These current densities compete with state-of-the-art GMR devices for metal based structures and almost with tunnel junction devices. The true potential of these devices however comes to light when they are operated as spin torque oscillators to emit high frequency, tunable, narrow spectrum electromagnetic waves. These Heusler based STOs show an outstanding q-factor of 4180, even when operating in the absence of an external field, a value which bests the highest value in the literature by more than an order of magnitude. While these devices currently still suffer from the same limited output power as all STO reported to date, their sub-micron lateral dimensions make the fabrication of an on-chip array of coupled oscillators, which is a promising path forward towards industrially relevant output power.