Refine
Has Fulltext
- yes (33)
Is part of the Bibliography
- yes (33) (remove)
Year of publication
- 2018 (33) (remove)
Document Type
- Doctoral Thesis (17)
- Preprint (11)
- Journal article (5)
Keywords
Institute
- Institut für Anorganische Chemie (33) (remove)
Phosphines are important ligands in homogenous catalysis and have been crucial for many advances, such as in cross-coupling, hydrofunctionalization, or hydrogenation reactions. Herein we report the synthesis and application of a novel class of phosphines bearing ylide substituents. These phosphines are easily accessible via different synthetic routes from commercially available starting materials. Owing to the extra donation from the ylide group to the phosphorus center the ligands are unusually electron-rich and can thus function as strong electron donors. The donor capacity surpasses that of commonly used phosphines and carbenes and can easily be tuned by changing the substitution pattern at the ylidic carbon atom. The huge potential of ylide-functionalized phosphines in catalysis is demonstrated by their use in gold catalysis. Excellent performance at low catalyst loadings under mild reaction conditions is thus seen in different types of transformations.
Cyclic diboranes(4) based on a chelating monoanionic, benzylphosphine linker were prepared by boron-silicon exchange between arylsilanes and B\(_2\)Br\(_4\). Coordination of Lewis bases to the remaining sp\(^2\) boron atom yielded unsymmetrical sp\(^3\)-sp\(^3\) diboranes, which were reduced with KC\(_8\) to their corresponding trans-diborenes. These compounds were studied by a combination of spectroscopic methods, X-ray diffraction and DFT calculations. PMe\(_3\)-stabilized diborene 6 was found to undergo thermal rearrangement to gem- diborene 8. DFT calculations on 8 reveal a polar boron-boron bond, and indicate that the compound is best described as a borylborylene.
Organoboron compounds, such as benzyl-, allyl-, allenyl-, vinyl-, and 2-boryl allyl-boronates, have been synthesized via metal-catalyzed borylations of sp3 C-O and C-H bonds. Thus, Cu-catalyzed borylations of alcohols and their derivatives provide benzyl-, allyl-, allenyl-, vinyl-, and 2-boryl allyl-boronates via nucleophilic substitution. The employment of Ti(OiPr)4 turns the OH moiety into a good leaving group (‘OTi’). The products of Pd-catalyzed oxidative borylations of allylic C-H bonds of alkenes were isolated and purified, and their application in the one-pot synthesis of stereodefined homoallyl alcohols was also investigated. Chapter 2 presents a copper-catalyzed synthesis of benzyl-, allyl-, and allenyl-boronates from benzylic, allylic, and propargylic alcohols, respectively, employing a commercially available catalyst precursor, [Cu(CH3CN)4]2+[BF4-]2, and Xantphos as the ligand. The borylation of benzylic alcohols was carried out at 100 oC with 5-10 mol % [Cu(CH3CN)4]2+[BF4-]2, which afforded benzylic boronates in 32%-95% yields. With 10 mol % [Cu(CH3CN)4]2+[BF4-]2, allylic boronates were provided in 53%-89% yields from the borylation of allylic alcohols at 60 or 100 oC. Secondary allylboronates were prepared in 72%-84% yields from the borylation of primary allylic alcohols, which also suggests that a nucleophilic substitution pathway is involved in this reaction. Allenylboronates were also synthesized in 72%-89% yields from the borylation of propargylic alcohols at 40 or 60 oC. This methodology can be extended to borylation of benzylic and allylic acetates. This protocol exhibits broad reaction scope (40 examples) and high efficiency (up to 95% yield) under mild conditions, including the preparation of secondary allylic boronates. Preliminary mechanistic studies suggest that nucleophilic substitution is involved in this reaction. Chapter 3 reports an efficient methodology for the synthesis of vinyl-, allyl-, and (E)-2-boryl allylboronates from propargylic alcohols via copper-catalyzed borylation reactions under mild conditions. In the presence of a commercially available catalyst precursor (Cu(OAc)2 or Cu(acac)2) and ligand (Xantphos), the reaction affords the desired products in up to 92% yield with a broad substrate scope (43 examples). Vinylboronates were synthesized in 50%-83% yields via Cu-catalyzed hydroboration of mono-substituted propargylic alcohols. With 1,1-disubstituted propargylic alcohols as the starting materials and Cu(OAc)2 as the catalyst precursor, a variety of allylboronates were synthesized in 44%-83% yields. The (E)-2-boryl allylboronates were synthesized in 54%-92% yields via the Cu-catalyzed diboration of propargylic alcohols. The stereoselectivity is different from the Pd(dba)2-catalyzed diboration of allenes that provided (Z)-2-boryl allylboronates predominantly. The isolation of an allenyl boronate as the reaction intermediate suggests that an SN2’-type reaction, followed by borylcupration, is involved in the mechanism of the diboration of propargylic alcohols. In chapter 4, a Pd-catalyzed allylic C-H borylation of alkenes is reported. The transformation exhibits high regioselectivity with a variety of linear alkenes, employing a Pd-pincer complex as the catalyst precursor, and the allylic boronate products were isolated and purified. This protocol can also be extended to one-pot carbonyl allylation reactions to provide homoallyl alcohols efficiently. An interesting mechanistic feature is that the reaction proceeds via a Pd(II)/Pd(IV) catalytic cycle. Formation of the Pd(IV) intermediate occurs by a unique combination of an NCNpincer complex and application of F-TEDA-BF4 as the oxidant. An important novelty of the present C-H borylation reaction is that all allyl-Bpin products can be isolated with usually high yields. This is probably a consequence of the application of the NCN-pincer complex as catalyst, which selectively catalyzes C-B bond formation avoiding subsequent C-B bond cleavage based side-reactions
Direct Heteroarylation Polymerization (DHAP) is becoming a valuable alternative to classical polymerization methods being used to synthesize π-conjugated polymers for organic electronics applications. In previous work, we showed that theoretical calculations on activation energy (Ea) of the C–H bonds were helpful to rationalize and predict the selectivity of the DHAP. For readers’ convenience, we have gathered in this work all our previous theoretical calculations on Ea and performed new ones. Those theoretical calculations cover now most of the widely utilized electron-rich and electron-poor moieties studied in organic electronics like dithienyl-diketopyrrolopyrrole (DT-DPP) derivatives. Theoretical calculations reported herein show strong modulation of the Ea of C–H bond on DT-DPP when a bromine atom or strong electron withdrawing groups (such as fluorine or nitrile) are added to the thienyl moiety. Based on those theoretical calculations, new cyanated dithienyl-diketopyrrolopyrrole (CNDT-DPP) monomers and copolymers were prepared by DHAP and their electro-optical properties were compared with their non-fluorinated and fluorinated analogues.
Reaction of bis-catecholatodiboron-NHC adducts, B\(_2\)Cat\(_2\)(NHC), (NHC = IMe (tetramethylimidazol-2-ylidene), IMes (1,3-dimesitylimidazol-2-ylidene) or IDIPP (1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene)) with BCl3 results in the replacement of the catecholato group bound to the four coordinate boron with two chlorides to yield diboron(5) Lewis acid-base adducts of formula CatB-BCl\(_2\)(NHC). These compounds are precursors to diboron(5) monocations, accessed by adding AlCl\(_3\) or K[B(C\(_6\)F\(_5\))\(_4\)] as halide abstraction agents in the presence of a Lewis base. The substitution of the chlorides of CatB-BCl\(_2\)(NHC) for hydrides is achieved using Bu\(_3\)SnH and a halide abstracting agent to form 1,1-dihydrodiboron(5) compounds, CatB-BH\(_2\)(NHC). Attempts to generate diboron(4) monocations of formula [CatB-B(Y)(NHC)]\(^+\) (Y = Cl or H) led to the rapid formation of CatBY.
The photochemistry and photophysics of transition metal complexes are of great interest, since such materials can be exploited for a wide range of applications such as in photocatalysis, sensing and imaging, multiphoton-absorption materials and the fabrication of OLEDs. A full understanding of the excited state behavior of transition metal compounds is therefore important for the design of new materials for the applications mentioned above. In principle, the luminescence properties of this class of compounds can be tuned by changing the metal or subtle changes in the ligand environment.
Furthermore, transition-metal complexes continue to play a major role in modern synthetic chemistry. In particular, they can realize selective transformations that would either be difficult or impossible by conventional organic chemistry. For example, they enable the efficient and selective formation of carbon–carbon bonds. One famous example of these types of transformations are metal-catalyzed cyclization reactions. Herein, metallacyclopentadiene complexes are considered as key intermediates in a number of metal-mediated or -catalyzed cyclization reactions, i.e. the [2+2+2] cyclotrimerization of alkynes. Recent research has focused on the synthesis and characterization of these metallacyclic intermediates such as MC4 ring systems. Metallacyclopentadienes are structurally related to main group EC4 systems such as boroles, siloles, thiophenes and phospholes. Overall, this group of compounds (EC4 analogues) is well known and has attracted significant attention due to their electron-transport and optical properties. Unlike transition metal analogues, however, these EC4 systems show no phosphorescence, which is due to inefficient SOC compared to 2nd and 3rd row transition metals, which promoted us to explore the phosphorescence potential of metallacyclopentadienes.
In 2001, Marder et al. developed a one-pot high-yield synthesis of luminescent 2,5 bis(arylethynyl)rhodacyclopentadienes by reductive coupling of 1,4-diarylbuta-1,3-diynes at a suitable rhodium(I) precursor. Over the past years, a variety of ligands (e.g. TMSA, S,S’ diethyldithiocarbamate, etc.) and 1,4-bis(p-R-phenyl)-1,3-butadiynes or linked , bis(p-R-arylethynyl)alkanes (R = electron withdrawing or donating groups) were investigated and always provided a selective formation of 2,5 bis(arylethynyl)rhodacyclopentadienes, which were reported to be fluorescent despite presence of the heavy atom. To examine the influence of the ligand sphere around the rhodium center on the intersystem-crossing (ISC) processes in the above-mentioned fluorescent rhodacyclopentadienes and to increase the metal character in the frontier orbitals by destabilizing the Rh filled d-orbitals, a -electron donating group was introduced, namely acetylacetonato (acac). Interestingly, in 2010 Tay reacted [Rh(κ2-O,O-acac)(PMe3)2] with ,-bis(p-R-arylbutadiynyl)alkanes and observed not only the fluorescent 2,5 bis(arylethynyl)rhodacyclopentadienes, but also rhodium 2,2’-bph complexes as products, which were reported to be phosphorescent in preliminary photophysical studies.
In this work, the reaction behavior of [Rh(κ2-O,O-acac)(L)2] (L = PMe3, P(p-tolyl)3) with different ,-bis(p-R-arylbutadiynyl)alkanes was established. Furthermore, the separation of the two isomers 2,5-bis(arylethynyl)rhodacyclopentadienes (A) and rhodium 2,2’-bph complexes (B), and the photophysical properties of those were explored in order to clarify their fundamentally different excited state behaviors.
Reactions of [Rh(κ2-O,O-acac)(P(p-tolyl3)2)] with ,-bis(arylbutadiynyl)alkanes gives exclusively weakly fluorescent 2,5-bis(arylethynyl)rhodacyclopentadienes. Changing the phosphine ligands to PMe3, reactions of [Rh(κ2-O,O-acac)(PMe3)2] and , bis(arylbutadiynyl)alkanes afford two isomeric types of MC4 metallacycles with very different photophysical properties, as mentioned before.
As a result of a normal [2+2] reductive coupling at rhodium, 2,5 bis(arylethynyl)rhodacyclopentadienes (A) are formed, which display intense fluorescence. Rhodium 2,2’-bph complexes (B), which show phosphorescence, have been isolated as a second isomer originating from an unusual [4+2] cycloaddition reaction and a subsequent -H-shift. Control of the isomer distribution, of 2,5-bis(arylethynyl)rhodacyclopentadienes (A) and rhodium biphenyl complexes (B), is achieved by modification of the linked , bis(arylbutadiynyl)alkane.
Changing the linker length from four CH2 to three CH2 groups, dramatically favors the formation of the rhodium biphenyl isomer B, providing a fundamentally new route to access photoactive metal biphenyl compounds in good yields. This is very exciting as the photophysical properties of only a limited number of bph complexes of Ir, Pd and Pt had been explored. The lack of photophysical reports in the literature is presumably due to the limited synthetic access to various substituted 2,2’-bph transition metal complexes.
On the other hand, as the reaction of [Rh(κ2-O,O-acac)(P(p-tolyl)3)2] with , bis(arylbutadiynyl)alkanes provides a selective reaction to give weakly fluorescent 2,5 bis(arylethynyl)rhodacyclopentadiene complexes with P(p-tolyl)3 as phosphine ligands, a different synthetic access to 2,5-bis(arylethynyl)rhodacyclopentadiene complexes with PMe3 as phosphine ligands was developed, preventing the time-consuming separation of the isomers. The weak rhodium-phosphorus bonds of 2,5-bis(arylethynyl)rhodacyclopentadiene complexes bearing P(p tolyl)3 as phosphine ligands, relative to those of related PMe3 complexes, allowed for facile ligand exchange reactions. In the presence of an excess of PMe3, a stepwise reaction was observed, giving first the mono-substituted, mixed-phosphine rhodacyclopentadiene intermediates and, subsequently, full conversion to the highly fluorescent 2,5 bis(arylethynyl)-rhodacyclopentadienes bearing only PMe3 ligands (by increasing the reaction temperature).
With spectroscopically pure 2,5-bis(arylethynyl)rhodacyclopentadiene complexes A (bearing PMe3 as phosphine ligands) and rhodium 2,2-bph complexes B in hand, photophysical studies were conducted. The 2,5-bis(arylethynyl)rhodacyclopentadienes (A) are highly fluorescent with high quantum yields up to 54% and very short lifetimes (τ = 0.2 – 2.5 ns) in solution at room temperature. Even at 77 K in glass matrices, no additional phosphorescence is observed which is in line with previous observations made by Steffen et al., who showed that SOC mediated by the heavy metal atom in 2,5-bis(arylethynyl)rhodacyclopentadienes and 2,5 bis(arylethynyl)iridacyclopentadienes is negligible. The origin of this fluorescence lies in the pure intra-ligand (IL) nature of the excited states S1 and T1. The HOMO and the LUMO are nearly pure and * ligand orbitals, respectively, and the HOMO is energetically well separated from the filled rhodium d orbitals. The absence of phosphorescence in transition metal complexes due to mainly IL character of the excited states is not unusual, even for heavier homologues than rhodium with greater SOC, resulting in residual S1 emission (fluorescence) despite ISC S1→Tn being sufficiently fast for population of T1 states. However, there are very few complexes that exhibit fluorescence with the efficiency displayed by our rhodacyclopentadienes, which involves exceptionally slow S1→Tn ISC on the timescale of nanoseconds rather than a few picoseconds or faster.
In stark contrast, the 2,2’-bph rhodium complexes B are exclusively phosphorescent, as expected for 2nd-row transition metal complexes, and show long-lived (hundreds of s) phosphorescence (Ф = 0.01 – 0.33) at room temperature in solution. As no fluorescence is detected even at low temperature, it can be assumed that S1→Tn ISC must be faster than both fluorescence and non-radiative decay from the S1 state. This contrasts with the behavior of the isomeric 2,5-bis(arylethynyl)rhodacyclopentadienes for which unusually slow ISC occurs on a timescale that is competitive with fluorescence (vide supra). The very small values for the radiative rate constants, however, indicate that the nature of the T1 state is purely 3IL with weak SOC mediated by the Rh atom. The phosphorescence efficiency of these complexes in solution at room temperature is even more impressive, as non-radiative coupling of the excited state with the ground state typically inhibits phosphorescence. Instead, the rigidity of the organic -system allows the ligand-based excited triplet state to exist in solution for up to 646 s and to emit with high quantum yields for biphenyl complexes. The exceptionally long lifetimes and small radiative rate constants of the rhodium biphenyl complexes are presumably a result of the large conjugated -system of the organic ligand. According to TD DFT studies, the T1 state involves charge-transfer from the biphenyl ligand into the arylethynyl moiety away from the rhodium atom. This reduces the SOC of the metal center that would be necessary for fast phosphorescence. These results show that the π-chromophoric ligand can gain control over the photophysical excited state behavior to such an extent that even heavy transition metal atoms like rhodium participate in increasing the fluorescence such as main-group analogues do. Furthermore, in the 2,2’-bph rhodium complexes, the rigidity of the organic -system allows the ligand-based excited triplet state to exist in solution for up to hundreds of s and to emit with exceptional quantum yields.
Therefore, investigations of the influence of the ligand sphere around the rhodium center have been made to modify the photophysical properties and furthermore to explore the reaction behavior of these rhodium complexes. Bearing in mind that the P(p-tolyl)3 ligands can easily be replaced by the stronger -donating PMe3 ligands, ligand exchange reactions with N heterocyclic carbenes (NHCs) as even stronger -donors was investigated. Addition of two equivalents of NHCs at room temperature led to the release of one equivalent of P(p-tolyl3) and formation of the mono-substituted NHC rhodium complex. The reaction of isolated mono-NHC complex with another equivalent of NHC at room temperature did not result in the exchange of the second phosphine ligand. Moderate heating of the reaction to 60 °C, however, resulted in the formation of tetra-substituted NHC rhodium complex [Rh(nPr2Im)4]+[acac]-. To circumvent the loss of the other ligands in the experiments described above, a different approach was investigated to access rhodacyclopentadienes with NHC instead of phosphine ligands.
Reaction of the bis-NHC complex [Rh(κ2-O,O-acac)(nPr2Im)2] with , bis(arylbutadiynyl)alkanes at room temperature resulted 2,5-bis(arylethynyl)-rhodacyclopentadienes with the NHC ligands being cis or trans to each other as indicated by NMR spectroscopic measurements and single-crystal X-ray diffraction analysis. Isolation of clean material and a fundamental photophysical study could not be finished for reasons of time within the scope of this work.
Furthermore, shortening of the well conjugated -system of the chromophoric ligand (changing from tetraynes to diynes) was another strategy to examine the reaction behavior of theses ligands with rhodium(I) complexes and to modify the excited state behavior of the formed rhodacyclopentadienes. The reaction of [Rh(κ2-O,O-acac)(PMe3)2] with 1,7 diaryl 1,6-heptadiynes (diynes) leads to the selective formation of 2,5 bis(aryl)rhodacyclopentadienes. These compounds, however, are very weakly fluorescent with quantum yields ФPL < 1, and very short emission lifetimes in toluene at room temperature. Presumably, vibrational modes of the bis(phenyl)butadiene backbone leads to a higher rate constant for non-radiative decay and is thus responsible for the low quantum yields compared to their corresponding PMe3 complexes with the bis(phenylethynyl)butadiene backbone at room temperature. No additional phosphorescence, even at 77 K in the glass matrix is observed.
Chancing the phosphine ligands to P(p-tolyl)3, reactions of [Rh(κ2-O,O-acac)(P(p-tolyl3)2)] with 1,7-diaryl-1,6-heptadiynes, however, resulted in a metal-mediated or -catalyzed cycloaddition reaction of alkynes and leads to full conversion to dimerization and trimerization products and recovery of the rhodium(I) starting material. This is intuitive, considering that P(Ar)3 (Ar = aryl) ligands are considered weaker -donor ligands and therefore have a higher tendency to dissociate. Therefore, rhodium(I) complexes with aryl phosphines as ligands have an increasing tendency to promote catalytic reactions, while the stronger -donating ligands (PMe3 or NHCs) promote the formation of stable rhodium complexes.
Finally, in Chapter 4, the findings of the work conducted on N-heterocyclic carbenes (NHCs) and cyclic (alkyl)(amino)carbenes (CAACs) is presented. These compounds have unique electronic and steric properties and are therefore of great interest as ligands and organo-catalysts. In this work, studies of substitution reactions involving novel carbonyl complexes of rhodium and nickel are reported. For characterization and comparison of CAACmethyl with the large amount of data available for NHC and sterically more demanding CAAC ligands, an overview on physicochemical data (electronics, sterics and bond strength) is provided.
The reaction of [Rh(-Cl)(CO)2]2 with 2 equivalents of CAACmethyl at low temperature afforded the mononuclear complex cis-[(RhCl(CO)2(CAACmethyl)]. However, reacting [Rh( Cl)(CO)2]2 with CAACmethyl at room temperature afforded a mixture of complexes. The mononuclear complex [(RhCl(CO)(CAACmethyl)2], the chloro-bridged complexes [(Rh2( Cl)2(CO)3(CAACmethyl)], [Rh(-Cl)(CO)(CAACmethyl)]2 and a carbon monoxide activation product were formed. The carbon monoxide activation product is presumably formed via the reaction of two equivalents of the CAAC with CO to give the bis-carbene adduct of CO, and subsequent rearrangement via migration of the Dipp moiety. While classical N-heterocyclic carbenes are not electrophilic enough to react with CO, related diamidocarbenes and alkyl(amino)carbenes undergo addition reactions with CO to give the corresponding ketenes. Consequently, to obtain the CAAC-disubstituted mononuclear complex selectively, 8 equivalents of CAACmethyl were reacted with 1 equivalent of [Rh(-Cl)(CO)2]2. For the evaluation of TEP values, [Ni(CO)3(CAAC)] was synthesized in collaboration with the group of Radius. With the complexes [(RhCl(CO)(CAACmethyl)2] and [Ni(CO)3(CAAC)] in hand, it was furthermore possible to examine the electronic and steric parameters of CAACmethyl. Like its bulkier congeners CAACmenthyl and CAACcy, the methyl-substituted CAAC is proposed to be a notably stronger -donor than common NHCs. While it has a very similar TEP value of 2046 cm-1, it additionally possess superior -acceptor properties (P = 67.2 ppm of phosphinidene adduct).
CAACs appear to be very effective in the isolation of a variety of otherwise unstable main group and transition metal diamagnetic and paramagnetic species. This is due to their low-lying LUMO and the small singlet-triplet gap. These electronic properties also allow free CAACs to activate small molecules with strong bonds. They also bind strongly to transition metal centers, which enables their use under harsh conditions. One recent development is the use of CAACs as ligands in transition metal complexes, which previously were only postulated as short-lived catalytic intermediates.[292,345] The availability of these reactive species allows for a better understanding of known catalytic reactions and the design of new catalysts and, moreover, new applications. For example Radius et al.[320] prepared a CAAC complex of cobalt as a precursor for thin-film deposition and Steffen et al.[346] reported a CAAC complex of copper with very high photoluminescent properties, which could be used in LED devices. With the development of cheap and facile synthetic methods for the preparation of CAACs and their corresponding transition metals complexes, as well as the knowledge of their electronic properties, it is safe to predict that applications in and around this field of chemistry will continue to increase.
Kapitel 1 Darstellung und Reaktivität des Cyanoborylens (3)
Im Rahmen dieser Arbeit ist es gelungen, in einer dreistufigen Synthese das erste basenstabilisierte Cyanoborylen [(cAAC)B(CN)]4 (3) in hohen Ausbeuten darzustellen (Schema 64). Hervorzuheben ist hierbei, dass dieser Ansatz keine „klassische“ Metallborylen- Vorstufe benötigt, weshalb wenig Synthesestufen und bessere Ausbeuten erreicht werden konnten. Schema 64. Darstellung von [(cAAC)B(CN)]4 (3). Eine erste Besonderheit von [(cAAC)B(CN)]4 (3) ist, dass dieses das einzige bislang bekannte Borylen darstellt, welches eine Stabilisierung durch Oligomerisierung erfährt und somit in Folgereaktionen nicht erst in situ generiert werden muss. Die elektronische Untersuchung von 3 durch Cyclovoltammetrie hat zudem gezeigt, dass 3 ein Redoxpotential von E1/2 = −0.83 V besitzt und somit eine chemische Oxidation zu neuen Verbindungen führen könnte, was durch Umsetzung mit AgCN demonstriert wurde (Schema 65). Hierdurch konnte [(cAAC)B(CN)3] (4) erfolgreich dargestellt und vollständig charakterisiert werden. [(cAAC)B(CN)3] (4) ist erst das zweite strukturell untersuchte basenstabilisierte Tricyanoboran. Zudem wurde die Reaktivität von [(cAAC)B(CN)]4 (3) gegenüber verschiedenen Lewis-Basen untersucht. Ziel hierbei war es, das oligomere Strukturmotiv aufzubrechen und gemischte zweifach basenstabilisierte Borylene zu realisieren. Hierbei konnte eine deutliche Abhängigkeit von der Basenstärke und dem sterischen Anspruch der Lewis-Base aufgedeckt werden. So hat sich gezeigt, dass Lewis-Basen wie THF, MeCN, Pyridin und PEt3 zu schwach sind, um die oligomere Struktur aufzubrechen. Im Gegensatz dazu führten die Umsetzungen von [(cAAC)B(CN)]4 (3) mit den starken Lewis-Basen cAAC bzw. IPr zu keinerlei Umsatz, was vermutlich auf einen zu großen sterischen Anspruch zurückzuführen ist. Dementsprechend verlief die Umsetzung von [(cAAC)B(CN)]4 (3) mit der starken und sterisch nicht anspruchsvollen Base IMeMe erfolgreich und lieferte [(cAAC)B(CN)(IMeMe)] (5) in guten Ausbeuten (Schema 65). Schema 65. Umsetzung von [(cAAC)B(CN)]4 (3) mit AgCN und IMeMe. Während [(cAAC)B(CN)(PEt3)] (6) nicht durch Umsetzung von [(cAAC)B(CN)]4 (3) mit PEt3 zugänglich ist, konnte dieses jedoch auch durch Reduktion von [(cAAC)BBr2(CN)] (2) in Gegenwart von PEt3 erhalten werden (Schema 66). [(cAAC)B(CN)(PEt3)] (6) stellt hierbei das das bislang erste bekannte Phosphan-stabilisierte Borylen dar. Schema 66. Kristallstruktur und Synthese von [(cAAC)B(CN)(PEt3)] 6.
Kapitel 2 Reaktivität von 3 gegenüber Chalcogenen und Chalcogeniden
In weiterführenden Studien wurde zudem die Reaktivität von 3 gegenüber Chalcogenen und Chalcogeniden im Detail untersucht. Durch Verwendung der entsprechenden Stöchiometrie konnte 3 hierbei selektiv zu den Bor-Chalcogen-Heterocyclen 9, 10, 13-15 umgesetzt werden (Schema 67). Schema 67. Darstellung von 9, 10, 13-15. Diese Ergebnisse wurden anschließend mit der Reaktivität des Konstitutionsisomers LII verglichen. In diesem Zusammenhang konnten 11 und 12 durch stöchiometrische Reaktionsführung dargestellt werden (Schema 68), welche nachfolgend in die bereits erwähnten Verbindungen 9 und 10 überführt werden konnten (Schema 69). Schema 68. Darstellung von 11 und 12. Schema 69. Darstellung von 9 und 10 aus 11 bzw. 12. Des Weiteren konnte 3 erfolgreich mit Ph2Se2, Me2Se2 und Ph2S2 zu 16-18 umgesetzt werden (Schema 70), wobei 16 und 18 auch durch Umsetzung von LII mit Ph2Se2 bzw. Ph2S2 zugänglich sind (Schema 70). Schema 70. Synthese von 16-18. Das tetramere Borylen 3 und das Diboren LII zeigen ähnliche Reaktivitäten gegenüber elementaren Chalcogenen sowie Dichalcogeniden. Lediglich die Darstellung der dreigliedrigen B2E-Heterocyclen 11 und 12 gelingt selektiv nur ausgehend von LII.
Kapitel 3 Darstellung und Reaktivität des Borylanions (19)
Ein weiterer Aspekt dieser Arbeit beschäftigte sich mit der Synthese und Reaktivität des Borylanions 19, eines der wenigen bekannten nukleophilen Borspezies. Der Zugang zu 19 durch Deprotonierung von 1 (Schema 71) ist hierbei besonders bemerkenswert, da es eine bis dato kaum bekannte bzw. verwendete Methode ist, da borgebundene Wasserstoffatome in der Regel hydridischer Natur sind, weshalb eine Deprotonierung normalerweise nicht möglich ist und nur für zwei weitere Systeme beschrieben ist. Hierzu zählen die Synthese des Dianions XLVII[6a, 6b] und die Synthese des Borylanions XLVIII[45]. Eine Gemeinsamkeit dieser drei Spezies ist die Gegenwart elektronenziehender Cyanidsubstituenten welche eine Umpolung der B‒H-Bindung bedingen, wodurch eine Deprotonierung erst ermöglicht wird. Schema 71. Synthese von 19. Um diesen Sachverhalt genauer zu untersuchen, wurden Rechnungen durchgeführt und die partiellen Ladungen (NBO) des borgebunden Wasserstoff an BH3, [(cAAC)BH3] und 1 auf dem BP86/def2-SVP-Niveau berechnet (Abbildung 53). Abbildung 53. Teilladungen (NBO) von BH3, [(cAAC)BH3] und 1 (BP86/def2-SVP). Durch Austausch eines der Hydride in [(cAAC)BH3] durch eine Cyanogruppe werden die borgebunden Wasserstoffe in 1 deutlich protischer (+0.038, +0.080), wobei schon durch Koordination des cAAC-Liganden an BH3 zwei der vorher hydridischen Wasserstoffe (BH3: partielle Ladung: –0.101) erheblich positiver geladen wird (+0.050). Der nukleophile Charakter von 19 wurde anschließend durch Reaktivitätsstudien untersucht. So führte die Umsetzung von 19 mit [(PPh3)AuCl] zur Bildung von [(cAAC)BH(CN)(AuPPh3)] (20) (Schema 72). Während die Umsetzung von 19 mit Tritylderivaten keine isolierbare Verbindung lieferte, konnte durch Umsetzung mit den schweren, weichen Homologen R3ECl (R = Ph, E = Ge, Sn und Pb; R = Me, E = Sn) eine ganze Reihe von Boranen dargestellt werden (Schema 72). Schema 72. Synthese von 20-24. Die Umsetzung der entsprechenden Silylderivate R3SiCl war hingegen mit einem anderen Reaktionsverlauf verbunden (Schema 73). Schema 73. Synthese von 25-28. Demnach erfolgt die Reaktion von 19, im Gegensatz zu den höheren Homologen, mit den Silylderivaten nicht am weichen, nukleophilen Borzentrum sondern am härteren Cyanostickstoffatom. Demzufolge wurden hierbei zunächst die Silylisonitrilverbindungen 25 und 26 gebildet, wobei 25 labil ist und innerhalb kürzester Zeit in 27 übergeht. Im Gegensatz dazu konnte 28 nur durch Bestrahlung von 26 dargestellt werden. Die Bindungsverhältnisse in 26 wurden zudem auch durch DFT-Rechnungen auf dem BP86/def2-SVP-Niveau untersucht. Die Analyse der Kohn–Sham MOs offenbarte hierbei ein HOMO mit π-Bindungscharakter über die gesamte CcAAC‒B‒CCN-Einheit mit angrenzendem π-Antibindungscharakter über die C‒NEinheiten beider Donorliganden (Abbildung 54). Abbildung 54. Gemessene (links) und berechnete (mitte) Struktur und HOMO (rechts) von 26. Während die Umsetzung von 26 mit Cu(I)Cl dessen hohes Reduktionsvermögen verdeutlichte, führte die Umsetzung mit Lithium in THF zur Bildung des Borylanions 19 und LiSiPh3. Die Reaktion von 26 mit BH3∙SMe2 lieferte hingegen quantitativ [(cAAC)BH3] (29), während bei Umsetzung mit Ph3SnCl quantitativ 22 gebildet wurde (Schema 74). Dieses sehr unterschiedliche Reaktionsverhalten rechtfertigt eine Beschreibung von 26 sowohl als ein Silylisonitrilborylen, als auch eine zwitterionische Silyliumboryl-Spezies. Schema 74. Ambiphile Reaktivität von 26 als neutrales Silylisonitrilborylen (A) oder als zwitterionische Silyliumboryl-Spezies (B).
Kapitel 4 Darstellung und Reaktivität von [(cAAC)BH3] (29)
Da 1 selektiv deprotoniert werden kann und [(cAAC)BH3] (29) Rechnungen zufolge ebenfalls borgebundene Wasserstoffe mit protischem Charakter besitzt, wurde versucht, diese Reaktivität auf 29 zu übertragen. Demzufolge wurde im Rahmen dieser Arbeit [(cAAC)BH3] (29) dargestellt und dessen Reaktivität gegenüber anionischen (Schema 75) und neutralen (Schema 76) Nukleophilen untersucht. Es hat sich jedoch gezeigt, dass die Umsetzung von [(cAAC)BH3] (29) mit Lithiumorganylen nicht zur Deprotonierung führt, sondern zur Bildung der Lithiumborate 30, 32 und 34, unabhängig von der Hybridisierung des Lithiumorganyls (sp3: LiNp, sp2: LiMes, sp: LiCCPh). Der Reaktionsmechanismus wurde durch DFT-Rechnungen untersucht (Abbildung 47). Diese zeigen eindeutig, das [(cAAC)BH3] (29) in einem Gleichgewicht mit dem entsprechenden Boran [(cAAC‒H)BH2] steht. Bei der stark exergonischen nukleophilen Addition der entsprechenden Basen wird [(cAAC‒H)BH2] aus dem Gleichgewicht entfernt (30: −29.6 kcal∙mol‒1; 32: ‒12.4 kcal∙mol‒1) und die Lithiumborate 30 und 32 gebildet. Diese Lithiumborate gehen dann durch Reaktion mit Me3SiCl in die entsprechenden cAACBoranaddukten 31, 33 und 35 über (Schema 75). Schema 75. Synthese von 30-35. Diese zweistufige Synthese ist deshalb bemerkenswert, da dies einer ungewöhnlichen Substitution an einem sp3-Boran gleichkommt. Des Weiteren wurde die Reaktivität von [(cAAC)BH3] (29) gegenüber neutralen Lewis-Basen untersucht. So konnte bei der Umsetzung mit cAAC Verbindung 36 und bei der Umsetzung mit Pyridin Verbindung 37 erhalten werden (Schema 76). Schema 76. Synthese von 36 und 37. Der Mechanismus der Bildung von 36 und 37 wurde ebenfalls durch DFT-Rechnungen untersucht, welche auf eine reversible Reaktion des Pyridin-Addukts 37 hindeutet. Dies konnte auch experimentell bestätigt werden. Im Gegensatz dazu ist die Bildung von 36 irreversibel.
Kapitel 5 Darstellung und Vergleich neuer Diborene
Im Rahmen dieser Arbeit ist es zudem gelungen, eine Reihe an NHC-Boranaddukten (42-50) darzustellen und diese zum Großteil in die entsprechenden Diborene (51-58) zu überführen (Schema 77). Schema 77. Synthese der NHC-Boranaddukte 42-50 sowie deren Umsetzung zu den Diborenen 51-58. Die meisten Verbindungen konnten hierbei vollständig charakterisiert und somit die NMR-spektroskopischen und strukturellen Daten miteinander verglichen werden. Die 11B-NMRSignale von 51-58 wurden in einem engen Bereich (20.2 bis 22.5 ppm) beobachtet, welcher sich mit dem von X und XI (21.3 und 22.4 ppm)[17] deckt. Im Festkörper weisen die Diborene einen B‒B-Abstand zwischen 1.576(4) Å (51) und 1.603(4) Å (54) auf, ohne dass ein Trend
erkennbar ist. Dieser Bereich ist zudem nahezu identisch mit bereits bekannten IMe-stabilisierten 1,2-Diaryldiborenen (1.585(4) bis 1.593(5) Å).[16-17] Einige dieser Diborene sind durch die entsprechende Wahl des Substitutionsmusters sehr labil und konnten deshalb nicht isoliert werden. Es ist dennoch gelungen UV-vis-spektroskopische Daten von 51, 52, 57 und 58 zu erhalten (Abbildung 55). Abbildung 55. UV-vis-Absorptionsspektren von 51, 52, 57 und 58. Die genaue Analyse der UV-vis-Spektren von 51, 52, 57 und 58 offenbart eine gewisse Abhängigkeit der Maxima vom Substitutionsmuster. Der Vergleich der Diborene 51-58 hat gezeigt, dass das Substitutionsmuster einen entscheidenden Einfluss auf die Lage der Grenzorbitale hat, was die Eigenschaften der Diborene deutlich verändert. So führte die Einführung einer Diphenylaminogruppe am Thienylrest zur Aufhebung der Koplanarität der Th‒B=B‒Th-Ebene, weshalb die entsprechenden Spezies durch die fehlende π-Konjugation sehr labil sind. Diese Beeinflussung der Koplanarität konnte bereits in kleinem Ausmaß bei der Substitution durch eine Me3Si-Gruppe beobachtet werden. Auch der Einfluss unterschiedlicher NHCs wurde untersucht. Während die Einführung von IMeMe kaum einen Einfluss auf die Absorptionsmaxima zeigt, führt die Verwendung von IPr zu einer deutlichen Verschiebung. Als das stabilste Diboren erwies sich im Rahmen dieser Untersuchung das [(IMe)BTh)]2 (X).
Die Synthese unterschiedlicher terminaler Gruppe 6 Borylenkomplexe wurde durchgeführt. Dabei wurden neben NMR- und IR-spektroskopischen Untersuchungen, die Identitäten der Verbindungen mittels Röntgenkristallographie festgestellt. Ferner wurden Studien zur Reaktivität des nucleophilen Borzentrums in diesen Verbindungen durchgeführt und die erhaltenen Reaktionsprodukte ebenfalls durch die oben genannten Spektroskopiemethoden charakterisiert. Dabei lag das Augenmerkt besonders auf der Darstellung von monovalenten Borverbindungen, sowie Verbindungen mit Bor-Element-Mehrfachbindungen.
Teil 1: Synthese und Reaktivität neuer Bor-haltiger Heterocyclen
Im Rahmen der vorliegenden Arbeit wurden Versuche unternommen, neue Borolverbindungen auf Basis des 2,3,4,5-Tetrakis(pinakolboryl)buta-1,3-diendiyl-Rückgrates mit unterschiedlichen Substituenten am Borzentrum darzustellen. Des Weiteren wurde ein neues Borolsystem auf Basis des Tetraphenylbutadien-Gerüstes synthetisiert, das die elektronenziehende Perfluorphenylgruppe als Bor-ständigen Substituenten trägt. Durch experimentelle Gegenüberstellung der strukturellen und spektroskopischen Parameter konnte - unterstützt durch quantenchemische Berechnungen - der Einfluss der Rückgratsubstitution eingehend untersucht werden.
Teil 2: Element-Element-Bindungsaktivierungen durch vicinale Biscarbenoide
Im Rahmen der vorliegenden Arbeit wurde das vicinale Biscarbenoid Bis(piperidyl)acetylen eingesetzt um die Reaktivität dieser Verbindungsklasse gegenüber Lewis-sauren Hauptgruppenelementverbindungen aufzuklären.
The first part of the present work provides an insight into the chemistry of iridium complexes bearing the bis(phosphinite) pincer ligand tBuPOCOP (k3-C6H3-1,3-(OPtBu2)2) towards primary boranes and phosphines as well as phosphine-borane Lewis adducts. It furthermore encloses some more detailed studies on their application as catalyst for the dehydrogenative coupling of the latter compounds. The results presented herein can be divided into three sections:
I. synthesis and characterization of aryl dihydroborate ligated iridium(III) complexes
II. and aryl phosphine coordinated iridium(I) and dihydrido iridium(III) complexes,
III. as well as studies on the reactivity of the parent iridium pincer complexes towards BH3 adducts of primary phosphines, which led to first results in the homogeneous catalytic dehydrocoupling of P-aryl substituted phosphine boranes mediated by such iridium pincer complexes.
The second part of the present work provides an insight into the chemistry of cyclic (alkyl)(amino) carbene-stabilized nickel complexes as well as it encloses some more detailed studies on the properties and reactivity of the free carbenes itself. The results presented herein can be divided into four sections:
I. synthesis and characterization of cyclic (alkyl)(amino) carbene-stabilized nickel carbonyl complexes,
II. which allow the evaluation and quantification of the steric and electronic properties of these cyclic (alkyl)(amino) carbenes,
III. first studies on the reactivity of these novel nickel complexes, and
IV. investigations on C–F and C–H bond activation at the carbene center of cyclic (alkyl)(amino) carbenes.
B≡N and B≡B triple bonds induce C-H activation of acetone to yield a (2-propenyloxy)aminoborane and an unsymmetrical 1-(2- propenyloxy)-2-hydrodiborene, respectively. DFT calculations showed that, despite their stark electronic differences, both the B≡N and B≡B triple bonds activate acetone via a similar coordination-deprotonation mechansim. In contrast, the reaction of acetone with a cAAC-supported diboracumulene yielded a unique 1,2,3-oxadiborole, which according to DFT calculations also proceeds via an unsymmetrical diborene, followed by intramolecular hydride migration and a second C-H activation of the enolate ligand.
Luminescent organotransition metal complexes are of much current interest. As the large spin-orbit coupling of 2nd and 3rd row transition metals usually leads to rapid intersystem crossing from S1 to T1, which enables phosphorescence, there is a special interest in using triplet-emitting materials in organic or organometallic light emitting diodes (OLEDs). Marder et al. have found that, reductive coupling of both para-R-substituted diarylbutadiynes and diaryldodecatetraynes on Rh(PMe3)4X leads to quantitative yields of bis(arylethynyl)-rhodacyclopentadienes with complete regiospecificity (R = BMes2, H, Me, OMe, SMe, CF3, CN, CO2Me, NMe2, NO2, C≡C-TMS and X = -C≡C-TMS, -C≡C-C6H4-4-NMe2, -C≡C-C≡C-C6H4-4-NPh2, Me, Cl).47,49 Unexpectedly, these compounds show intense fluorescence rather than phosphorescence (ɸf = 0.33-0.69, t = 1.2 3.0 ns). The substituent R has a significant influence on the photophysical properties, as absorption and emission are both bathochromically shifted compared to R = H, especially for R = π-acceptor.
To clarify the mechanism of the formation of the rhodacyclopentadienes, and to investigate further their unique photophysical properties, a series of novel, luminescent rhodacyclopentadienes with dithiocarbamate as a bidentate ligand at the rhodium centre has been synthesised and characterised (R = NO2, CO2Me, Me, NMe2, SMe, Ar = C6F4-4-OMe). The rhodacyclopentadienes have been formed via reductive coupling of diaryl undecatetraynes with [Rh(k2-S,S`-S2CNEt2)(PMe3)2]. The structures of a series of such compounds were solved by single crystal X-ray diffraction and are discussed in this work. The compounds were fully characterised via NMR, UV/Vis and photoluminescence spectroscopy as well as by elemental analysis, high-resolution mass spectrometry (HRMS) and X-ray diffraction.
When heating the reactions, another isomer is formed to a certain extent. The so-called dibenzorhodacyclopentadienes already appeared during earlier studies of Marder et al., when acetylacetonate (acac) was employed as the bidentate ligand at the Rh-centre. They are probably formed via a [4+2] cycloaddition reaction and C-H activation, followed by a β-H shift.
Use of the perfluorinated phenyl moiety Ar = C6F4-4-OMe provided a total new insight into the mechanism of formation of the rhodacyclopentadiene isomers and other reactions. Besides the formation of the expected rhodacyclopentadiene, a bimetallic compound was generated, isolated and characterised via X-ray crystallography and NMR spectroscopy, elemental analysis and high resolution mass spectrometry.
For further comparison, analogous reactions with [Rh(k2 S,S` S2CNEt2)(PPh3)2] and a variety of diaryl undecatetraynes (R = NO2 CO2Me, Me, NMe2, SMe, Ar = C6F4-4-OMe) were carried out. They also yield the expected rhodacyclopentadienes, but quickly react with a second or even third equivalent of the tetraynes to form, catalytically, alkyne cyclotrimerisation products, namely substituted benzene derivatives (dimers and trimers), which are highly luminescent. The rhodacyclopentadienes (R = NO2, CO2Me, Me, SMe, Ar = C6F4-4-OMe) are stable and were isolated. The structures of a series of these compounds were obtained via single crystal X-ray crystallography and the compounds were fully characterised via NMR, UV/Vis and photoluminescence spectroscopy as well as by elemental analysis and HRMS.
Another attempt to clarify the mechanism of formation of the rhodacyclopentadienes involved reacting a variety of diaryl 1,3-butadiynes (R = CO2Me, Me, NMe2, naphthyl) with [Rh(k2 S,S` S2CNEt2)(PMe3)2]. The reactions stop at an intermediate step, yielding a 1:1 trans π-complex, confirmed by single crystal X-ray diffraction and NMR spectroscopy. Only after several weeks, or under forcing conditions (µw / 80 °C, 75 h), the formation of another major product occurs, having bound a second diaryl 1,3-butadiyne. Based on earlier results of Murata, the product is identified as an unusual [3+2] cycloaddition product, ϭ-bound to the rhodium centre.
Die Reaktivität acyclischer Carbene, N-heterocyclischer Silylene und Germylene gegenüber verschiedenen Boranen sowie die weitere Reaktivtät der erhaltenen Verbindungen wird untersucht. Im zweiten Teil wird die Darstellung und Reaktiviert einiger Thorium- und Lanthanoidhydridoboratkomplexe genauer beleuchtet.
In der vorliegenden Arbeit werden die Sensorikeigenschaften der lumineszierenden metallorganischen Gerüstverbindungen (metal-organic frameworks, MOFs) ■(3@∞)[Ba0.98Eu0.02(Im)2] (1), ■(3@∞)[Sr0.90Eu0.10(Im)2] (2), ■(3@∞)[Tb(Im)3] (3), ■(2@∞)[Tb2Cl6(4,4‘-bipy)3]•2(4,4‘-bipy) (4) und ■(2@∞)[Eu2Cl6(4,4‘-bipy)3]•2(4,4‘-bipy) (5), sowohl in Form der Bulksubstanzen als auch in Form von mixed-matrix membranes (MMMs) gegenüber den Analyten Wasser, Methanol, Ethanol und Isopropanol untersucht und mittels kinetischer Betrachtungen quantitativ beschrieben.
Hierfür wurde ein Versuchsaufbau konstruiert, der den Anforderungen einer quantitativen Erfassung der Sensorikeigenschaften genügt und einflussgebende externe und interne Parameter, wie die Konzentration des Analyten, Temperatur, Druck, Probenmenge und Probenoberfläche standardisiert, um eine möglichst genaue Erfassung der auftretenden Veränderung der Lumineszenzintensität zu ermöglichen. Zusätzlich wurde eine mathematische Betrachtung genutzt, um die Ergebnisse der Experimente zu interpretieren und in einen Gesamtkontext zu setzen.
Für jedes der fünf Modellsysteme wurde je eine Messreihe gegen ein breites Spektrum an relativen Feuchten (Wasser als Analyt) bei 25 °C durchgeführt. Der in allen Fällen auftretende Lumineszenzverlust ließ sich jeweils mittels einer Exponentialfunktion beschreiben und zur Bestimmung der konzentrationsabhängigen Reaktionskonstanten sowie der Halbwertszeiten nutzen. Die gewonnenen Informationen wurden verwendet, um die Reaktionskonstanten und die Schwellenwerte der Sensorik der jeweiligen Systeme zu bestimmten.
In weiteren Versuchsreihen wurde der Messaufbau genutzt und der Einfluss der Alkohole Methanol, Ethanol und Isopropanol auf die Lumineszenz der MOFs ■(3@∞)[Ba0.98Eu0.02(Im)2] (1), ■(2@∞)[Tb2Cl6(4,4‘-bipy)3]•2(4,4‘-bipy) (4) und ■(2@∞)[Eu2Cl6(4,4‘-bipy)3]•2(4,4‘-bipy) (5) bei verschie-denen Konzentrationen in der Gasphase und bei unterschiedlichen Temperaturen untersucht, quantitativ bestimmt und gemäß der vorangegangen Messreihen für Feuchte beschrieben. Zusätzlich wurde die Veränderung des Lumineszenzmusters der MOFs ■(2@∞)[Tb2Cl6(4,4‘-bipy)3]•2(4,4‘-bipy) (4) und ■(2@∞)[Eu2Cl6(4,4‘-bipy)3]•2(4,4‘-bipy) (5) untersucht.
Die Möglichkeiten der Prozessierung von ■(3@∞)[Ba0.98Eu0.02(Im)2] (1), und ■(2@∞)[Tb2Cl6(4,4‘-bipy)3]•2(4,4‘-bipy) (4) wurden im Hinblick auf eine praktische Anwendung im Bereich der Sensorik hin untersucht. Hierfür wurden die jeweiligen Bulksubstanzen via Dropcoating in die drei Polymere Polystyrol (PS), Polyvinychlorid (PVC) und Polymethylpenten (TPX) eingebettet. Die so dargestellten MMMs wurden auf ihre Sensorikeigenschaften hin untersucht und der Lumineszenzverlust wurde quantitativ beschrieben. Des Weiteren wurde die korrespondierende Bulksubstanz, in Bezug auf die (konzentrationsabhängigen) Reaktionskonstanten und Halbwertszeiten, mit den MMMs verglichen. Im Rahmen einer Kooperation mit der Arbeitsgruppe von Prof. Dr. Janiak der Heinrich-Heine-Universität Düsseldorf wurden die MOFs ■(3@∞)[Ba0.98Eu0.02(Im)2] (1) und ■(3@∞)[Sr0.90Eu0.10(Im)2] (2) in Polysulfon (PSF) eingebettet und ebenfalls auf ihre Fähigkeit zur Feuchtesensorik hin untersucht.
Im Rahmen der vorliegenden Arbeit war es erstmals möglich, die Sensoreigenschaften der genutzten MOFs und CPs (1 - 5) quantitativ zu erfassen und mathematisch zu beschreiben. Ebenso konnte das entwickelte Sensorikkonzept erfolgreich auf die Erfassung von verschiedenen Alkoholen in der Gasphase übertragen werden (für System 1, 4 und 5). Anschließend war es möglich, die genutzten Modellsysteme 1, 2 und 4 unter dem Erhalt der Lumineszenzeigenschaft in verschiedene Polymere einzubetten und deren Eigenschaften zur Feuchtesensorik ebenfalls quantitativ zu erfassen und mathematisch zu beschreiben.
Im letzten Abschnitt der Arbeit wurden die beiden porösen ZIFs (zeolitic imidazolate frameworks) Na-Rho-ZMOF (6) und Zn(nmIm)2 (7) mit einer Terbiumnitratlösung behandelt, um durch die Füllung der Kavitäten die Lumineszenzeigenschaft der Terbiumionen in das ZIF zu implementieren. Der Grad und die Qualität der Befüllung wurden anschließend analytisch auf Lumineszenzeigenschaften hin untersucht. Hierbei konnte die Befüllung von Na-Rho-ZMOF (6) erfolgreich nachgewiesen werden, während es bei Zn(nmIm)2 (7) nicht zu einer Befüllung des Porensystems kam.
Im Rahmen dieser Arbeit war es möglich, eine Vielzahl NHC-stabilisierter Tetrabromdiboran-Addukte zu synthetisieren und mithilfe von zwei bzw. vier Reduktionsäquivalenten zu reduzieren. Dies führte zur Bildung neuartiger Dibromdiborene bzw. Diborin-Verbindungen, welche infolgedessen charakterisiert wurden. Der Einfluss des Carbens auf die jeweilige Struktur und Elektronik der synthetisierten Verbindungen war hierbei von besonderem Interesse.
Im Fall der Diborine gelang es neben den beiden bereits literaturbekannten Verbindungen XXIII und XXXII drei neue Vertreter mit einer B≡B-Dreifachbindung (7, 8 und 9) darzustellen.
Aufgrund der Verwendung von gesättigten Carbenen wurden die spektroskopischen und strukturellen Eigenschaften der Verbindungen soweit modifiziert, dass sie zwischen denen mit einer isolierten Dreifachbindung (B2IDip2 (XXIII) und B2IDep2 (XXXII)) und der mit Kumulencharakter (B2CAAC2 (XXXIV)) eingeordnet werden können.
Neben der Charakterisierung neuartiger Verbindungen mit Bor–Bor-Dreifachbindungscharakter konnten auch zahlreiche Reaktivitätsstudien durchgeführt werden. So verdeutlichte sich der strukturelle und elektronische Unterschied der Diborine vor allem am Beispiel der Reaktivität gegenüber CO (Schema 42). Während für B2IDip2 (XXIII) der Reaktionsverlauf über das Intermediat XXV zum Bis(boralacton) XXVI reagierte, konnte für die Diborine 7 und 8 primär die Bildung des jeweiligen Bis(boraketens) (16 und 18) beobachtet werden. Die Bindungssituation dieser Zwischenstufen wird vor allem durch die π-Rückbindungen der Boratome in die CO-Bindung geprägt, welche zu einer Schwächung dieser führen und sowohl in den Festkörperstrukturen als auch in den Schwingungsspektren verdeutlicht wird. Die weitere Umsetzung zu den entsprechenden Bis(boralactonen) 17 und 19 erfolgte im Anschluss je nach Substituent bei Raumtemperatur (16) oder durch Heizen der Boraketen-Zwischenstufe (18). Mithilfe quantenmechanischer Betrachtung konnte die Ursache der unterschiedlichen Reaktionsverläufe näher erläutert werden, auch unter Einbeziehung des Diborakumulens XXXIV, welches mit Überschuss an CO auch bei hohen Temperaturen lediglich zur Bildung des Bis(boraketens) (XXXV) führt. Dies zeigt, dass aufgrund der unterschiedlichen Reaktionsbarrieren der jeweiligen Diborine bzw. des Diborakumulens mit CO die Bildung des Ketens bzw. anschließend des Bis(boralactons) verschieden stark bevorzugt wird. Für B2IDip2 (XXIII) wird deshalb aufgrund der hohen freien Gibbs-Energie, welche bei der Bildung des Bis(boralactons) entsteht, im ersten Schritt keine Bildung des IDip-stabilisierten Bis(boraketens) beobachtet und für B2CAAC2 (XXXIV) aufgrund von nahezu keiner Energiegewinnung im zweiten Schritt lediglich XXXV gebildet. Die freien Gibbs-Energien beider Reaktionsschritte der Umsetzungen von B2SIDip2 (7) und B2SIDep2 (8) mit CO ordnen sich zwischen den oben beschriebenen Extrema ein.
Einen Einfluss des Carbens auf die Reaktivität zeigte auch die Umsetzung mit Wasserstoffgas. Während bei XXIII, XXXII und 7 keine Reaktionen beobachtet werden konnten, verlief diese bei 8 und XXXIV unter einer 1,2-Addition des H2-Moleküls an die B–B-Bindung und Bildung der jeweiligen Dihydrodiborene 21 (B2H2SIDep2) und XXXVIII (B2H2CAAC2).
Neben der Reaktivität gegenüber CO und H2 wurden auch Reaktionen beschrieben, welche zu einer Insertion einer in-situ-gebildeten Borylen-Spezies führten. Diese sind die Umsetzungen von B2IDip2 (XXIII) mit CO-Quellen oder der Brønstedt-Säure Triethylammonium(tetraphenyl)borat. In beiden Fällen kam es im Laufe der Reaktion zur Insertion eines Borfragments in die CH-Bindung des Isopropylrestes und zur Bildung der Boracyclen 20 (B2IDip2CO) und 25 ([B2IDip2H][BPh4]). Daneben konnte eine ähnliche Beobachtung bei der Umsetzung des SIDep-stabilisierten Diborins 8 mit Isonitrilen gemacht werden. Hierbei insertierte bei der Reaktion mit Metyhlisonitril ein Borfragment in den benachbarten Imidazolring unter Ausbildung eines Sechsrings. Gleichzeitig konnte eine CH-Aktivierung des Ethylrestes des Dep-Substituenten beobachtet werden. Bei der analogen Umsetzung mit tert-Butylisonitril wurde neben der einfachen auch die zweifache Insertion beider Borzentren beobachtet.
Die Reaktivität gegenüber Chalkogenen und Chalkogenverbindungen stellte einen weiteren, zentralen Aspekt dieser Arbeit dar.
Die Umsetzung von B2IDip2 mit elementarem Schwefel und Selen führte dabei zur Spaltung der B≡B-Bindung durch reduktive Insertion von drei Chalkogenbrücken und Bildung der entsprechenden Pentachalkogenverbindungen 26 und 27. Die analogen Umsetzungen des Diborins 7 mit Selen führte ebenfalls zur Bildung einer Pentachalkogenverbindung (29). Da derartige Verbindung in der Literatur bislang nicht bekannt sind, sollte auch deren Reaktivität exemplarisch an 27 untersucht werden. Dabei zeigte sich, dass die Verbindung stabil unter photolytischen Bedingungen ist und sich bei thermischer Behandlung erst nach mehreren Tagen zersetzt. Die Umsetzung mit Triphenylphosphan oder elementarem Natrium zur Entfernung von Selenfragmenten oder mit Triphenylphosphanselenid zur Addition weiterer Seleneinheiten zeigten keine Reaktionen. Lediglich die Umsetzung mit zwei Äquivalenten Natriumnaphthalid führte zur erfolgreichen Darstellung des Dimers 28. Im Gegensatz dazu lieferte die Reaktion des Diborins 8 mit elementarem Selen bereits ein anderes Strukturmotiv (30), in welchem sechs Selenatome in Form von ein-, zwei und dreiatomigen Henkeln zwischen die Boratome insertierten. Durch Umsetzung mit Triphenylphosphan deuteten erste Reaktionsversuche darauf hin, dass es möglich ist, selektiv ein Selenfragment aus der dreiatomigen Selenbrücke zu entfernen und die entsprechende Pentachalkogenverbindung 31 zu generieren.
Reaktivitätsstudien der Diborine XXIII, 7 und 8 gegenüber Diphenyldisulfid und -selenid als auch gegenüber Isopropylthiol führten in allen Fällen zur 1,2-Addition an die B≡B-Bindung unter Bildung der Diborene 32 bis 36 bzw. 42 und 43.
Im Gegensatz dazu kam es bei der Reaktion von XXIII mit Diphenylditellurid zur Bildung eines salzartigen Komplexes 37, in welchem ein Phenyltellurireniumkation die B≡B-Bindung verbrückte und das entsprechende Phenyltellurid als Gegenion fungierte. Durch den Einsatz von para-substituierten Diphenylditelluriden konnten zwei weitere Verbindungen (38 und 39) dargestellt werden. Dabei zeigte der para-Substituent jedoch nur einen geringen Einfluss auf die elektronische Struktur der gebildeten Produkte. Die Reaktion von Diborin 8 mit Diphenylditellurid zeigte neben der Bildung des salzartigen Komplexes 40 auch die Entstehung des 1,2-Additionsproduktes 41, was vermutlich wie bereits bei der Reaktion mit elementarem Selen auf sterische Effekte zurückzuführen ist (Schema 45). Aufgrund der besonderen Bindungssituation in den Komplexen 37 bis 40 wurden diese eingehender untersucht. Die Auswertung der Röntgenstrukturanalyse, Raman-Spektroskopie, 11B-NMR-Spinkopplungsexperimente sowie der quantenmechanischen Rechnungen ergab dabei Hinweise auf eine Koordinationsverbindung nach dem Dewar-Chatt-Duncanson-Bindungsmodell.
Weitere Reaktivitätsstudien v.a. des IDip-stabilisierten Diborins (XXIII) beschäftigten sich mit der Synthese von π-Komplexverbindungen durch Reaktionen von XXIII mit Alkalimetallkationen in der Ligandensphäre schwach koordinierender Anionen mit Kupfer(I)-Verbindungen. Die Bildung sogenannter Kation-π-Komplexe des Diborins mit Lithium bzw. Natrium gelang durch die Umsetzung von B2IDip2 (XXIII) mit je zwei Äquivalenten Lithium bzw. Natriumtetrakis(3,5-dichlorphenyl)borat quantitativ unter Bildung von 46 und 47 als unlösliche, violette Feststoffe.
Die in der Kristallstruktur ersichtliche Bindungssituation zeigt die Einkapselung der jeweiligen Kationen durch das B2-Fragment des Diborins sowie der Arylreste der Ligandensphäre, die sich infolgeder Komplexierung ekliptisch zueinander anordnen. Aufgrund der ungewöhnlichen Bindungssituation wurden theoretische Studien aufbauend auf den aus den Kristallstrukturen und den aus spektroskopischen Messungen erhaltenen Daten angefertigt. Diese beweisen eine rein elektrostatische Wechselwirkung der Kationen mit der noch intakten B≡B-Bindung des Diborins. Auch für die Diborine 7 und 8 konnten am Beispiel des Natriumtetrakis(3,5-dichlorphenyl)borats die Komplexe 48 ([B2SIDip2Na2][BArCl4]) und 49 ([B2SIDep2Na2][BArCl4]) erfolgreich dargestellt werden. Dies beweist, dass in den SIDip- und SIDep-substituierten Diborinen noch genügend Elektronendichte auf der B–B-Bindung lokalisiert ist, um derartige π-Wechselwirkungen auszubilden.
Die Reaktivität des Diborins XXIII gegenüber Kupfer(I)-Verbindungen wurde bereits von Dr. Jan Mies im Zuge seiner Dissertation untersucht. In dieser Arbeit ist es nun gelungen, weitere Komplexe mit Kupfer(I)-alkinylen (50 und 51) darzustellen. Darüber hinaus war es möglich, eine alternative Syntheseroute zur Darstellung des dreikernigen Kupfer(I)-chlorid-Komplexes XXVII zu entwickeln sowie den entsprechenden Zweikerner 52 darzustellen. Die Verbindungen XXVII, 52 und XXVIII wurden im Anschluss in Kooperation mit der Gruppe um Dr. Andreas Steffen auf ihre photophysikalischen Eigenschaften hin untersucht.Dabei zeigte sich, dass alle drei Verbindungen aufgrund der langen Lebenszeiten ihrer angeregten Zustände phosphoreszieren, die Quantenausbeute der Phosphoreszenz jedoch stark von der Verbindung abhängig ist. Während der dreikernige Kupfer(I)-Komplex XXVII bereits in Lösung eine Quantenausbeute von 29 % aufwies, war eine Bestimmung der Quantenausbeute in Lösung für B2IDip2(CuC2TMS)2 (XXVIII) aufgrund der schwachen Emission nicht möglich. Die Ursache des unterschiedlichen Emissionsverhaltens konnte mittels Betrachtung von Absorptions- und Anregungsspektren erklärt werden. Für B2IDip2(CuCl)3 sind die beiden Spektren in Lösung nahezu identisch. Im Gegensatz dazu weisen die beiden Zweikerner 52 und XXVIII ein vom Absorptionsspektrum verschiedenes Anregungsspektrum auf, was darauf schließen lässt, dass es zu Konformationsänderungen im angeregten Zustand kommt, welche die Emission auslöscht. TheoretischeStudien bestätigen für 52, dass die Barriere zwischen zwei Konformeren, in denen die Kupferfragmente linear bzw. orthogonal angeordnet sind, lediglich 4.77 kcal/mol beträgt und bekräftigen damit die vermutete Ursache der schwachen Emission.
Ein zweites Thema dieser Arbeit beschäftigte sich mit der Darstellung und Untersuchung neuartiger Dibromdiborene, welche im Zuge der Diborin-Synthese beobachtet werden konnten. Dabei gelang es neben dem bereits literaturbekannten IDip-stabilisierten Dibromdiboren (XXIV) noch sechs weitere Vertreter dieser Verbindungsklasse darzustellen (10–15). Auch hier konnte ein Einfluss der Carbenliganden auf die strukturellen und elektronischen Eigenschaften beobachtet werden.
Die Reaktivität der Dibromdiborene wurde in einigen Testreaktionen untersucht. Dabei zeigte sich, dass im Hinblick auf ihr Oxidationsverhalten die literaturbekannte Darstellung von Monokationen (53 [B2Br2IDip2][BArF4] und 54 [B2Br2IDep2][BArF4]) nachempfunden werden konnte. Versuche zur Bromsubstitution zeigten durch Umsetzung mit BuLi den Austausch der Bromid-Liganden durch Butylgruppen, jedoch bildeten sich aufgrund von Umlagerungen anstelle der erwarteten Diborene die kondensierten Ringsysteme 56–58.
Die vorliegende Arbeit ist in zwei Teile gegliedert und befasst sich im ersten Abschnitt mit der stöchiometrischen und katalytischen Aktivierung von Element-Element-Bindungen an NHC-stabilisierten Eisen(II)-Komplexen. Im Fokus der Untersuchungen steht hierbei sowohl die Isolierung und Charakterisierung neuartiger NHC-stabilisierter Eisen-Komplexe sowie deren Nutzung als Katalysatoren in der Hydrosilylierung von Carbonylverbindungen und der Hydrophosphanierung von Mehrfachbindungssystemen. Der zweite Teil dieser Arbeit ist der Reaktivität N-heterocyclischer Carbene gegenüber Hauptgruppenelement-Verbindungen wie beispielsweise Chlorsilanen, Stannanen, Phosphanen und Alanen gewidmet. Neben der Aufklärung mechanistischer Details der Reaktionen ist die übergangsmetallfreie Hydrodefluorierung von Fluoraromaten zentraler Bestandteil dieser Untersuchungen.
Im Rahmen dieser Arbeit konnten, ausgehend von Borat-haltigen Salzen und ionischen Flüssigkeiten (ILs) sowie Lanthanid-haltigen Precursoren, 30 neue Komplexe und Koordinationspolymere dargestellt werden. Dazu wurden vielfältige Synthesestrategien verfolgt und angewendet, unter anderem Salzmetathesen in Lösung, Solvothermalsynthesen und Ionothermalsynthesen. Ein Hauptaugenmerk bei der Synthese der Zielverbindungen lag auf deren Eigenschaften, wobei insbesondere die Photolumineszenzeigenschaften der erhaltenen Koordinationsverbindungen untersucht wurden. Als Borat-haltige Liganden wurden sowohl Cyanoborate als auch Oxoborate hinsichtlich ihrer Eignung zum Aufbau neuer Koordinationspolymere untersucht. Als Cyanoborat-haltige Edukte wurden dabei Säuren und ionische Flüssigkeiten mit Dicyano-, Tricyano- und Tetracyanoborat- Anionen eingesetzt, die durch die unterschiedliche Zahl an Cyanogruppen zu vielfältigen Koordinationsverbindungen führen können. Mittels Ionothermalsynthese konnten die Verbindungen 1∞[Ln(NO3)2{B(CN)4}(H2O)4] (Ln = La, Eu) sowie [EMIm]1∞[LaNO3{B(CN)4}3(H2O)3] dargestellt werden, wobei es zu einer Transformation der ionischen Flüssigkeit [EMIm][B(CN)4] in ein Koordinationspolymer kommt, in dem sowohl Kation als auch Anion der IL beteiligt sind. Dabei ist es bemerkenswerterweise durch die Reaktionstemperatur möglich zu steuern, welches Produkt sich letztlich bildet. Ebenfalls durch Ionothermalsynthese gelang die Synthese von Einkristallen der Verbindung 3∞[La{C2F5B(CN)3}3], durch deren Kenntnis die Verbindungen 3∞[Ln{C2F5B(CN)3}3](Ln = Eu, Ho) als isotype Strukturen identifiziert und hinsichtlich ihrer Lumineszenzeigenschaften charakterisiert werden konnten. Durch Umsetzungen der Lanthanidchloride mit der Säure H[BH2(CN)2] in Solvothermalsynthesen in Pyridin (py) konnten eindimensionale Koordinationspolymere [H(py)2]1∞[LnCl2{BH2(CN)2}2(py)2]·0.5py (Ln = Ce, Pr) erhalten werden. Unter vergleichbaren Synthesebedingungen aber im Lösungsmittel MeCN beobachtet man hingegen die Bildung von Raumnetzen der Zusammensetzung 3∞[Ln2{BH2(CN)2}9]·[Ln(CH3CN)9] (Ln = Ce, Eu, Tb). Die dreidimensionalen Koordinationspolymere 3∞[Ln{BH(CN)3}3] (Ln = Eu, Tb) wurden ebenfalls in MeCN synthetisiert, allerdings ausgehend von der Säure [H3O][BH(CN)3]. Die erwähnten Verbindungen zeigen für die spektroskopisch relevanten Vertreter charakteristische Lumineszenz auf Basis von 5d-4f- respektive 4f-4f-Übergängen, die überwiegend auf der direkten Anregung der jeweiligen Lanthanidionen beruht. Mit dem Bis-salicylatoborat-Anion (= BSB−) gelang ausgehend von Na[BSB] und LnCl3 unter solvothermalen Bedingungen in Pyridin die Synthese der eindimensionalen, strangartigen Koordinationspolymere 1∞[Ln(BSB)3(py)2] (Ln = Y, La – Nd, Sm) und der zweidimensionalen, schichtartigen Verbindungen 2∞[Ln(BSB)3(py)] (Ln = Sm, Eu, Tb – Er). Einblicke über den Mechanismus der Bildung der genannten Verbindungen konnten durch den Komplex [ErCl2(py)4BSB] gewonnen werden, der eine sukzessive Substitution der Chlorid-Liganden nachweist. Die Verbindungen mit dem [BSB]−-Anion zeigen Photolumineszenz, die auf unterschiedliche Prozesse zurückgeführt werden kann. So weist 1∞[Y(BSB)3(py)2] Fluoreszenz auf, die von den [BSB]−-Anionen herrührt, während 1∞[Ln(BSB)3(py)2] (Ln = Ce, Nd, Sm) sowie 2∞[Ln(BSB)3(py)] (Ln = Sm, Tb, Dy) Lumineszenz auf Basis von 5d-4f- und 4f-4f-Übergängen zeigen, die durch einen Antenneneffekt der koordinierenden [BSB]−-Anionen vergleichsweise intensiv beobachtet werden können. Eine Sonderstellung nehmen hier die Verbindungen 2∞[Ln(BSB)3(py)] (Ln = Eu, Ho) ein. Während mit Eu3+ überwiegend direkte Anregung festgestellt werden kann, treten für Ho3+ Reabsorptionsprozesse auf. Durch Kombination unterschiedlicher Gehalte an Eu3+- bzw. Tb3+-Ionen in den eindimensionalen Koordinationspolymeren 1∞[EuxTb1−x(BSB)3(py)2] (x = 0.75, 0.50, 0.25) können zudem Mischfarben der Lumineszenz erzeugt werden. Mit dem Komplex [B2O(C2O4)2(dmf)2] (dmf = Dimethylformamid) und dem Koordinationspolymer 1∞[Tb{o-C6H4(CO2)2}(H2O)6][PHB]2 (PHB− = Phthalatoborat) konnte zudem die Sonderstellung des [BSB]−-Anions deutlich gemacht werden, da es als einziges untersuchtes Spiroborat-Anion vollständig in Zielverbindungen eingebaut werden konnte, während vergleichbare Spiroborat-Anionen wie das [PHB]−-Anion in Gegenwart Lewis-acider Verbindungen hingegen die Abspaltung funktioneller Gruppen zeigten. Insgesamt konnten in dieser Arbeit somit zahlreiche neue, lumineszierende Koordinationspolymere mit Cyano- und Oxoboraten erfolgreich dargestellt werden.
Molecules containing multiple bonds between atoms—most often in the form of olefins—are ubiquitous in nature, commerce, and science, and as such have a huge impact on everyday life. Given their prominence, over the last few decades, frequent attempts have been made to perturb the structure and reactivity of multiply-bound species through bending and twisting. However, only modest success has been achieved in the quest to completely twist double bonds in order to homolytically cleave the associated π bond. Here, we present the isolation of double-bond-containing species based on boron, as well as their fully twisted diradical congeners, by the incorporation of attached groups with different electronic properties. The compounds comprise a structurally authenticated set of diamagnetic multiply-bound and diradical singly-bound congeners of the same class of compound.
Molecules containing multiple bonds between atoms—most often in the form of olefins—are ubiquitous in nature, commerce, and science, and as such have a huge impact on everyday life. Given their prominence, over the last few decades, frequent attempts have been made to perturb the structure and reactivity of multiply-bound species through bending and twisting. However, only modest success has been achieved in the quest to completely twist double bonds in order to homolytically cleave the associated π bond. Here, we present the isolation of double-bond-containing species based on boron, as well as their fully twisted diradical congeners, by the incorporation of attached groups with different electronic properties. The compounds comprise a structurally authenticated set of diamagnetic multiply-bound and diradical singly-bound congeners of the same class of compound.
The purpose of the present work was, in the first part, to investigate the potential of iron-based metal complexes in catalytic borylation reactions with alkyl halides as substrates and B2pin2 as the borylation reagent. Moreover, extended studies of the recently reported, copper mediated borylation reactions of aryl halides were performed, including the screening of substrates and alkoxy bases as well as ligand-screening. Investigations were undertaken on the role of Cu-nanoparticles, which might be involved in this catalytic reaction. Furthermore, Cu-phosphine complexes were synthesized as precursors, but attempts to isolate Cu-boryl species which are intermediates in the proposed catalytic cycle were unsuccessful, although 11B NMR evidence for a Cu-boryl complex was obtained.
In the second part of this work, the alternative, Lewis-acidic diboron(4) compound bis(ethylene glycolato)diboron (B2eg2) was synthesized to compare its reactivity with the reactivity of other diboron(4) compounds (e.g. B2neop2, B2cat2, B2pin2 and B2(NMe2)4). Therefore, reactions of B2eg2 with different Lewis-bases, such as NHCs and phosphines, were performed to investigate the possible formation of sp2-sp3 or sp3-sp3 adducts and ring-expansion reactions (RERs).
The aim was to obtain a better general insight into the reactivity of diboron(4) compounds with Lewis-bases because they are both used as reactants in transition metal-catalyzed and metal-free borylation reactions. Understanding the B–B bond activation process promoted by Lewis-bases provides a new perspective on the reaction pathways available for various borylation reactions.