Refine
Has Fulltext
- yes (209)
Is part of the Bibliography
- yes (209)
Year of publication
Document Type
- Doctoral Thesis (209) (remove)
Language
- English (209) (remove)
Keywords
- Topologischer Isolator (26)
- Molekularstrahlepitaxie (20)
- Quecksilbertellurid (17)
- Photoelektronenspektroskopie (15)
- Organischer Halbleiter (13)
- HgTe (12)
- Organische Solarzelle (10)
- Spintronik (10)
- topological insulator (10)
- ARPES (9)
- Dünne Schicht (9)
- Halbleiter (9)
- Kernspintomografie (9)
- Fotovoltaik (8)
- Heterostruktur (8)
- NMR-Tomographie (8)
- Spektroskopie (8)
- Ultrakurzer Lichtimpuls (8)
- Galliumarsenid (7)
- MRI (7)
- Organisches Molekül (7)
- Quantenpunkt (7)
- Optische Spektroskopie (6)
- Rekombination (6)
- Röntgen-Photoelektronenspektroskopie (6)
- Röntgenspektroskopie (6)
- Spintronics (6)
- photoelectron spectroscopy (6)
- ATLAS <Teilchendetektor> (5)
- Bildgebendes Verfahren (5)
- Elektronenspinresonanz (5)
- Elektronenstruktur (5)
- Femtosekundenbereich (5)
- Laser (5)
- MBE (5)
- Magnetischer Halbleiter (5)
- Manganverbindungen (5)
- NMR-Bildgebung (5)
- Nanodraht (5)
- Oberflächenphysik (5)
- Optik (5)
- Perowskit (5)
- Pulsformung (5)
- Raman-Spektroskopie (5)
- Rastertunnelmikroskop (5)
- Semimagnetischer Halbleiter (5)
- XPS (5)
- molecular beam epitaxy (5)
- spintronics (5)
- Elektronenkorrelation (4)
- Elektronentransport (4)
- Elektronischer Transport (4)
- Festkörperphysik (4)
- Gasionisationsdetektor (4)
- Kondo-Effekt (4)
- LEED (4)
- Magnetoelektronik (4)
- Magnetowiderstand (4)
- Manganarsenide (4)
- NEXAFS (4)
- Nahfeldoptik (4)
- Nanostruktur (4)
- Nickelverbindungen (4)
- Perovskite (4)
- Photovoltaik (4)
- Plasmon (4)
- Quanten-Hall-Effekt (4)
- Rastertunnelmikroskopie (4)
- Semiconductor (4)
- Siliciumcarbid (4)
- Supraleitung (4)
- Topologie (4)
- Wide-gap-Halbleiter (4)
- Zwei-Sechs-Halbleiter (4)
- organic semiconductors (4)
- organic solar cells (4)
- pulse shaping (4)
- recombination (4)
- Übergangsmetalloxide (4)
- Arteriosklerose (3)
- CdTe (3)
- Elektronenspin (3)
- Ferromagnetic Semiconductors (3)
- Frequenzvervielfachung (3)
- Grenzfläche (3)
- Halbleiterschicht (3)
- Magnetic Anisotropy (3)
- Magnetische Resonanz (3)
- Mangansilicide (3)
- Molecular Beam Epitaxy (3)
- Oberflächenzustand (3)
- Parallele Bildgebung (3)
- Photoluminescence (3)
- Physik (3)
- Quantenwell (3)
- RIXS (3)
- Rashba-Effekt (3)
- Resonanz-Tunneleffekt (3)
- Röntgenbeugung (3)
- Röntgendiffraktometrie (3)
- Silber (3)
- Simulation (3)
- Solarzelle (3)
- Spin (3)
- Spin-Bahn-Wechselwirkung (3)
- Transportprozess (3)
- XRD (3)
- Zinkselenid (3)
- electronic structure (3)
- n-Halbleiter (3)
- physics (3)
- scanning tunneling microscopy (3)
- spin (3)
- AFM (2)
- Adaptivregelung (2)
- Aminosäuren (2)
- Antimonverbindungen (2)
- Axion (2)
- Bismuthene (2)
- Bismutselenide (2)
- Bismutverbindungen (2)
- Cadmiumselenid (2)
- CdSe (2)
- CePt5 (2)
- Compressed Sensing (2)
- Computersimulation (2)
- Coulomb-Blockade (2)
- Deformation (2)
- Diffusion (2)
- Dotierung (2)
- Dreiecksgitter (2)
- Dünnschichtsolarzelle (2)
- Einzelmolekülmikroskopie (2)
- Electromagnon (2)
- Elektromagnon (2)
- Elektronenflüssigkeit (2)
- Elektronische Eigenschaft (2)
- European Organization for Nuclear Research. ATLAS Collaboration (2)
- Excitons (2)
- Experimental physics (2)
- Exziton (2)
- Ferromagnetikum (2)
- Ferromagnetische Halbleiter (2)
- Fourier-Spektroskopie (2)
- GaMnAs (2)
- Germanium (2)
- Gitterbaufehler (2)
- Gold (2)
- Graphen (2)
- Graphene (2)
- HRXRD (2)
- Halbleiter-Supraleiter-Kontakt (2)
- Halbleiteroberfläche (2)
- Halbleiterphysik (2)
- Herstellung (2)
- Heusler (2)
- Heuslersche Legierung (2)
- Impulslaser (2)
- Inelastische Röntgenstreuung (2)
- Kohärente Kontrolle (2)
- Kohärenz (2)
- LEEM (2)
- LHC (2)
- Ladungstransfer (2)
- Ladungstransport (2)
- Lasertechnologie (2)
- Luttinger liquid (2)
- Luttinger-Flüssigkeit (2)
- Magnetic Resonance Imaging (2)
- Magnetic Topological Insulator (2)
- Magnetic resonance (2)
- Magnetische Anisotropie (2)
- Magnetischer Röntgenzirkulardichroismus (2)
- Magnetismus (2)
- Magnetit (2)
- Magnetoelektrischer Effekt (2)
- Magnetotransport (2)
- Magnon (2)
- Mangan (2)
- Manganate (2)
- Metall-Isolator-Phasenumwandlung (2)
- Micromegas (2)
- Molekül (2)
- Mott-Isolator (2)
- Multiferroics (2)
- Multiferroikum (2)
- Nanometerbereich (2)
- Nanooptik (2)
- Nanowire (2)
- NiMnSb (2)
- Nichtlineare Spektroskopie (2)
- Niederdimensionaler Halbleiter (2)
- OLED (2)
- Oberfläche (2)
- Oberflächenplasmonresonanz (2)
- Organic Semiconductors (2)
- PTCDA (2)
- Parallel Imaging (2)
- Perylendianhydrid (2)
- Photochemische Reaktion (2)
- Photoemission (2)
- Photostrom (2)
- Physikalische Eigenschaft (2)
- QAHE (2)
- Quantum anomalous Hall effect (2)
- RHEED (2)
- Raman (2)
- Rashba effect (2)
- Regelung (2)
- Rekonstruktion (2)
- Relaxometry (2)
- Riesenmagnetowiderstand (2)
- Röntgenabsorption (2)
- Röntgenabsorptionsspektroskopie (2)
- Selbstorganisation (2)
- Silicon carbide (2)
- Siliziumcarbid (2)
- Spin defect (2)
- Spin flip (2)
- Surface plasmons (2)
- Technische Optik (2)
- Thermoelektrizität (2)
- Titan-Saphir-Laser (2)
- Ultrafast information processing (2)
- Ultrafast spectroscopy (2)
- Ultrakurzzeitspektroskopie (2)
- Ultraviolett-Photoelektronenspektroskopie (2)
- Verbindungshalbleiter (2)
- Würzburg / Sonderforschungsbereich II-VI-Halbleiter (2)
- XES (2)
- ZnSe (2)
- Zweidimensionales Material (2)
- Zwischenmolekulare Kraft (2)
- adaptive optimization (2)
- amino acids (2)
- atherosclerosis (2)
- charge transfer (2)
- computed tomography (2)
- doping (2)
- ferromagnetic semiconductors (2)
- gas phase (2)
- helical edge states (2)
- honeycomb lattice (2)
- intermolecular interaction (2)
- magnetic anisotropy (2)
- nicht-kartesische Bildgebung (2)
- non-Cartesian Imaging (2)
- organic (2)
- organic molecule (2)
- organic photovoltaic (2)
- organic semiconductor (2)
- organische Photovoltaik (2)
- plasmonics (2)
- quantum dot (2)
- quantum point contact (2)
- quantum spin hall insulator (2)
- single electron transistor (2)
- spectroscopy (2)
- spin-orbit coupling (2)
- topological insulators (2)
- two-dimensional topological insulator (2)
- verdünnt magnetische Halbleiter (2)
- "(Ga (1)
- (Ga (1)
- (resonant) photoemission spectroscopy (1)
- 19F-MR (1)
- 2D (1)
- 3 Tesla (1)
- 3D (1)
- 3D topological insulator (1)
- ASAXS (1)
- ATLAS (1)
- ATLAS New Small Wheel (1)
- ATLAS New Small Wheels (NSW) (1)
- ATLAS-Detektor (1)
- Aberration (1)
- Abschattung (1)
- Abschirmung (1)
- Absorptionsspektroskopie (1)
- Abstimmbarer Laser (1)
- Abwärmenutzung (1)
- Adaptive Optimierung (1)
- Adsorbat (1)
- Adsorption (1)
- Adsorptionskinetik (1)
- Adsorptionsschicht (1)
- Ag(111) (1)
- Aharonov-Bohm (1)
- Aharonov-Casher phase (1)
- Aharonov-Casher-Effekt (1)
- Ambipolarer Ladungstransport (1)
- Analogschaltung (1)
- Angle-resolved Photoemission Spectroscopy (1)
- Anisotropic Magnetoresistance (1)
- Anisotropie (1)
- Anisotropy (1)
- Antenne (1)
- Antiferromagnet (1)
- Antiferromagnetikum (1)
- Antiferromagnetismus (1)
- Antimon (1)
- Antimonide (1)
- Artefakt <Bildgebende Diagnostik> (1)
- Artery Models (1)
- Atherosclerosis (1)
- Atherosklerose (1)
- Atom und Molekülphysik (1)
- Atomgitter (1)
- Atomic (1)
- Atomketten (1)
- Attosekundenbereich (1)
- Austauschaufspaltung (1)
- BaBiO3 (1)
- Ballistischer Transport (1)
- Band edge thermometry (1)
- Bandstruktur (1)
- Bandstrukturberechnung (1)
- Bariumtitanat (1)
- Bauchaorta (1)
- Bauelemente (1)
- Bestimmung des Relaxations-Parameters in der Magnetresonanztomografie (1)
- Bestrahlung (1)
- Bi2Se3 (1)
- Biegekristalltechnik (1)
- Bienenwolf (1)
- Bildqualität (1)
- Bindungsenergie (1)
- Biofabrication (1)
- Bismut (1)
- Blei (1)
- Bloch-Siegert (1)
- Bornitrid (1)
- Boron Nitride (1)
- Bruchfläche (1)
- Bruchmechanik (1)
- Brustaorta (1)
- Buckminsterfulleren (1)
- Bulk-boundary correspondence (1)
- Burst (1)
- CAIPIRINHA (1)
- CPP-GMR (1)
- CSI (1)
- Cadmiumsulfid (1)
- Cadmiumtellurid (1)
- Capacitive Effects (1)
- CdZnSe/ZnSe (1)
- Cerlegierung (1)
- Charge Carrier Generation (1)
- Charge Carrier Lifetime (1)
- Charge carrier recombination (1)
- Charge-Transfer (1)
- Charges recombination (1)
- Chemische Bindung (1)
- Coherent 2D Spectroscopy (1)
- Coherent Control (1)
- Coherent Multidimensional Spectroscopy (1)
- Coherent Two-dimensional Nanoscopy (1)
- Coherent control (1)
- Color Center (1)
- Compressed Sensig (1)
- Computertomografie (1)
- Core-shell (1)
- Correlated Electron Materials (1)
- Coulomb-blockade (1)
- Crystal (1)
- CuMnSb (1)
- CuPc (1)
- DLS (1)
- DLTS (1)
- DMS (1)
- DNMR-Spektroskopie (1)
- Datenspeicher (1)
- Degradation <Technik> (1)
- Dichtebestimmung in Theorie und Experiment (1)
- Dichtefunktionalformalismus (1)
- Dielektrikum (1)
- Dilatometrie (1)
- Diluted Magnetic Semiconductors (1)
- Diluted magnetic semiconductors (1)
- Dimension 2 (1)
- Dimension 3 (1)
- Dimensional Crossover (1)
- Dimerisierung (1)
- Dirac semimetal (1)
- Disordered semiconductor (1)
- Donor-Acceptor Interface (1)
- Doppeldiode (1)
- Drei-Fünf-Halbleiter (1)
- Dreidimensionale Rekonstruktion (1)
- Drift-Diffusion (1)
- Dynamic Imaging (1)
- Dynamic magnetic resonance imaging (1)
- Dynamische MR Bildgebung (1)
- Dynamische Messung (1)
- Dünnschichten (1)
- Dünnschichttechnik (1)
- Dünnschichttransistor (1)
- EPR Spektroskopie (1)
- Einzelelektronentransistor (1)
- Elastische Spannung (1)
- Electrical transport (1)
- Electrochemical energy storage (1)
- Electron Paramagnetic Resonance (1)
- Electron Spin Resonance (1)
- Electron Transparency (1)
- Electron density (1)
- Electron spin (1)
- Electronic Structure (1)
- Elektromigration (1)
- Elektron-Phonon-Wechselwirkung (1)
- Elektronen Tunneln (1)
- Elektronenbeugung (1)
- Elektronendichte (1)
- Elektronendichtebestimmung (1)
- Elektronengas (1)
- Elektronenmikroskopie (1)
- Elektronenspektroskopie (1)
- Elektronenstrahllithographie (1)
- Elektronische Anregung (1)
- Elektronische Eigenschaften (1)
- Elektronische Korrelationen (1)
- Elektronisches Bauelement (1)
- Elementarteilchenphysik (1)
- Energiedispersiv (1)
- Energiedispersive Röntgenspektroskopie (1)
- Energielücke (1)
- Energiespeicher (1)
- Energietechnik (1)
- Energy Harvesting (1)
- Epitaxieschicht (1)
- Epitaxy (1)
- Erzeugung Hoher Harmonischer (1)
- Erzeugung hoher Harmonischer (1)
- Evolutionäre Optimierung (1)
- Evolutionärer Algorithmus (1)
- Excited states spectroscopy (1)
- Exciton (1)
- Experimental Physics (1)
- External-Cavity Quantum Cascade Laser (1)
- Externer-Kavitäts-Quanten-Kaskaden-Laser (1)
- Exziton-Polariton (1)
- FIR-Spektroskopie (1)
- FT-IR-Spektroskopie (1)
- Facettierung (1)
- Farbzentrum (1)
- Faserorientierung (1)
- Fe3O4 (1)
- Feldeffekttransistor (1)
- Feldstärkemessung (1)
- Femtochemie (1)
- Femtochemistry (1)
- Femtosecond Dynamics (1)
- Femtosecond Laser Pulse Shaping (1)
- Femtosecond Pulse Shaping (1)
- Femtosecond dynamics (1)
- Femtosekunden Dynamik (1)
- Femtosekunden Pulsformung (1)
- Femtosekunden-Laserpulsformung (1)
- Femtosekundendynamik (1)
- Femtosekundenlaser (1)
- Femtosekundenpulse (1)
- Fernsehmaske (1)
- Ferroelektrikum (1)
- Ferromagnet (1)
- Ferromagnetische Schicht (1)
- Ferromagnetism (1)
- Ferromagnetismus (1)
- Fiber Orientation (1)
- Fluor-19 (1)
- Fluoreszenzkorrelationsspektroskopie (1)
- Fluoreszenzlöschung (1)
- Fluorophore (1)
- Fotophysik (1)
- Fourier-transform spectral interferometry (1)
- Fragmentation (1)
- Fragmentationsenergie (1)
- Freies Molekül (1)
- Frequenzverdopplung (1)
- Fullerenderivate (1)
- Fullerene (1)
- GMR (1)
- GRAPPA (1)
- Gallium Manganese Arsenide (1)
- Gamma-Burst (1)
- Gammablitze (1)
- Gas mixtures (1)
- Gaseous Hydrocarbons (1)
- Gasförmige Kohlenwasserstoffe (1)
- Gasgemisch (1)
- Gasphase (1)
- Giantmagnetoresistance (1)
- Gitterdynamik (1)
- Gittersimulator (1)
- Glas (1)
- Glatter Krallenfrosch (1)
- Glycin Peptide (1)
- Glykosylierung (1)
- Grenzflächenleitfähigkeit (1)
- Gunnarsson Schönhammer (1)
- HARPES (1)
- HOMOGENIZED (1)
- Halb-Heusler Legierung NiMnSb (1)
- Halbleiterdiode (1)
- Halbleitergrenzflächen (1)
- Halbleitersubstrat (1)
- Halbmetalle (1)
- Half Heusler alloy NiMnSb (1)
- Hard X-ray Angle Resolved Photoemission (1)
- Hartmannsensor (1)
- Heißes Elektron (1)
- Helimagnetism (1)
- Hemodynamics (1)
- Heteroepitaxie (1)
- Heteroorganische Monolage (1)
- Heterostructure Growth (1)
- Heterostruktur-Bauelement (1)
- Heterostrukturen (1)
- Higgs (1)
- High-Harmonic Generation (1)
- High-Z Oxides (1)
- High-order Harmonic Generation (1)
- Hochauflösendes Verfahren (1)
- Hochgeschwindigkeitskinematographie (1)
- Hochmagnetfeld (1)
- Hofmeister (1)
- Hofmeister-Serie (1)
- Hohe Harmonisch Generation (1)
- Hohe Harmonische (1)
- Hohen-Harmonischen Erzeugung (1)
- Holstein model (1)
- Holstein-Modell (1)
- Hot electron (1)
- Hubbard model (1)
- Hubbard-Modell (1)
- Hämodynamik (1)
- IG-FET (1)
- II-VI Semiconductors (1)
- IPES (1)
- IR-TrueFISP (1)
- Image Reconstruction (1)
- Imaging spin-filter (1)
- Impaktversuche (1)
- Implantat (1)
- Impulsformung (1)
- Impulslaserbeschichten (1)
- Incommensurate spin structure (1)
- Indium (1)
- Infrarotspektroskopie (1)
- Inkommensurable Zykloide (1)
- Integrated circuit (1)
- Integriert-optisches Bauelement (1)
- Interface Conductivity (1)
- Interference microscopy (1)
- Interferenz <Physik> (1)
- Inverse Photoemissions (1)
- Inversion Symmetry Breaking (1)
- Ionization (1)
- Iridate (1)
- Irradiation (1)
- Isomerization (1)
- Isomerizierung (1)
- Jena / Institut fuer Optik und Quantenelektronik Jena (1)
- Josephson junction (1)
- Josephson-Kontakt (1)
- KTaO3 (1)
- Kalium (1)
- Kapazität (1)
- Kern-Schale-Struktur (1)
- Kernspintomographie (1)
- Koadsorbat (1)
- Kohaerente Optik (1)
- Kohlenwasserstoffe (1)
- Kohärente 2D Spektroskopie (1)
- Kohärente Anregung (1)
- Kohärente Optik (1)
- Kolloider Halbleiter (1)
- Kondensierte Materie (1)
- Kondo (1)
- Konfokale Mikroskopie (1)
- Konjugierte Polymere (1)
- Kontrastmittel (1)
- Koppler (1)
- Korrelation (1)
- Kosmische Strahlung (1)
- Kraftmikroskopie (1)
- Kristall (1)
- Kristallfeld (1)
- Kristallfläche (1)
- Kristalloberfläche (1)
- Kristallwachstum (1)
- Kristallzüchtung (1)
- LC-Oszillator (1)
- LDOS (1)
- LaAlO3 (1)
- LaAlO3/SrTiO3 (1)
- LaVO3 (1)
- Ladungsträgergenerierung (1)
- Ladungsträgerrekombination (1)
- Lanthantitanate (1)
- Laser absorption spectroscopy (1)
- Laserabsorptionspektroskopie (1)
- Laserchemie (1)
- Laserdiode (1)
- Laserspektroskopie (1)
- Laserverstaerker (1)
- Laserverstärker (1)
- Lattice Light-Sheet (1)
- Lead-free double perovskite (1)
- Leerlaufspannung (1)
- Legierungs-Hubbard-Modell (1)
- Light-Sheet (1)
- Lithography (1)
- Localization Microscopy (1)
- Lokales Wachstum (1)
- Low-dimensional molecular metals (1)
- Luminescence (1)
- Lumineszenzlöschung (1)
- Lung (1)
- Lunge (1)
- Luttinger liquide (1)
- MIR spectroscopy (1)
- MIR-Spektroskopie (1)
- MPGD (1)
- MR imaging (1)
- MRS (1)
- MRT (1)
- Macroscopic transport (1)
- Magnetic Resonance Relaxometry (1)
- Magnetic properties of thin films interfaces (1)
- Magnetisch (1)
- Magnetische Anisotropien (1)
- Magnetische Anregung (1)
- Magnetische Eigenschaft (1)
- Magnetische Halbleiter (1)
- Magnetischer Sensor (1)
- Magneto-Electric Effect (1)
- Magneto-Elektrischer Effekt (1)
- Magnetoelectric effect (1)
- Magnetometry (1)
- Magnetoresistance (1)
- Magnetresonanz-Relaxometrie (1)
- Majorana bound state (1)
- Majorana-Nullmoden (1)
- Manganese Silicide (1)
- Manganesesilicide (1)
- Mangansilizid (1)
- Maske (Halbleitertechnologie) (1)
- Massenspektrometrie (1)
- Maus (1)
- Mercury Telluride (1)
- Mercury telluride (1)
- Messprozess (1)
- Metall-Halbleiter-Kontakt (1)
- Metallimplantat (1)
- Metalloberfläche (1)
- Metamaterial (1)
- Methanol (1)
- Micelle (1)
- Micro-Hall Magnetometry (1)
- Micro-SQUID (1)
- Mikro-SQUID (1)
- Mikrohallmagnetometrie (1)
- Mikroskopie (1)
- Mikroskopische Technik (1)
- Mikrotubulus (1)
- Mn)As (1)
- Mn)As" (1)
- MnSi (1)
- Mode propagation (1)
- Model Based Reconstruction Algorithms in Magnetic Resonance Imaging (1)
- Modellbasierte-Rekonstruktionsalgorithmen in der Magnetresonanztomografie (1)
- Modenpropagation (1)
- Moelucar beam epitaxy (1)
- Molecular Physics (1)
- Molecular and Optical Physics (1)
- Molecular beam Epitaxy (1)
- Molecular beam epitaxy (1)
- Molecular beam epitxy (1)
- Molekularbewegung (1)
- Molekulardynamik (1)
- Molekularelektronik (1)
- Molekularstrahl Epitaxie (1)
- Molekülphysik (1)
- Molekülsymmetrie (1)
- Molekülzustand (1)
- Momentum- and spin-resolved hard X-ray photoelectron spectroscopy (1)
- Monolage (1)
- Monolayer (1)
- Monoschicht (1)
- Monte-Carlo-Simulation (1)
- Mott Transistion (1)
- Mott insulator (1)
- Mott-Schottky Analyse (1)
- Mott-Übergang (1)
- Multiferroika (1)
- Multimode-Laser (1)
- Myon (1)
- NMR-Mikroskopie (1)
- NMR-Spektroskopie (1)
- Nahfeld Optik (1)
- Nano-Optik (1)
- Nanoantenne (1)
- Nanolithografie (1)
- Nanooptic (1)
- Nanooptics (1)
- Nanopartikel (1)
- Nanoporöser Stoff (1)
- Nanostructures (1)
- Nanowires (1)
- Natrium (1)
- Natriumhydroxid (1)
- Neue Physik (1)
- Neuronale Netzwerke (1)
- Neutrino (1)
- Neutronenstreuung (1)
- New Small Wheel (1)
- New physics (1)
- Nichtlineare Optik (1)
- Niederdimensionale Molekulare Metalle (1)
- Niederdimensionales Elektronengas (1)
- Niederdimensionales System (1)
- Non-Hermitian skin effect (1)
- ODMR-Spektroskopie (1)
- OFET (1)
- OLEDs (1)
- Oberflächenanalyse (1)
- Oberflächenlegierung (1)
- Oberflächenphonon (1)
- Oberflächenplasmon (1)
- Oberflächenpräparation (1)
- Oberflächenspannung (1)
- Onedimensional (1)
- Optical spectroscopy (1)
- Optimale Kontrolle (1)
- Optimierung (1)
- Optische Anisotropie (1)
- Optische Antennen (1)
- Optische Eigenschaft (1)
- Optoelektronik (1)
- Orbital (1)
- Orbital Angular Momentum (1)
- Ordered metal adsorbates on semiconductor surfaces (1)
- Organic Light Emitting Diode (1)
- Organic Photovoltaic (1)
- Organic Photovoltaics (1)
- Organic and hybrid semiconductors (1)
- Organic semiconductors (1)
- Organik (1)
- Organik-Metall Grenzflächen (1)
- Organische Dünnschichten (1)
- Organische Halbleiter (1)
- Organische Leuchtdioden (1)
- Organische Verbindungen (1)
- Organischer Feldeffekttransistor (1)
- Organischer Stoff (1)
- Oxid (1)
- Oxide (1)
- Oxide Heterostructure (1)
- Oxidhalogenide (1)
- P123 (1)
- P3HT (1)
- PLD (1)
- PT-Transformation (1)
- Papier-Solarzelle (1)
- Parallel imaging (1)
- Paralleler Prozess (1)
- Paramagnetic resonance (1)
- Peierls-Übergang (1)
- Pentacen (1)
- Peptide (1)
- Pfadintegral (1)
- Pflanzen (1)
- Pflanzenbildgebung (1)
- Phasendynamik (1)
- Phasenkohärenz (1)
- Phasenkontrastverfahren (1)
- Photoanregung (1)
- Photoelectron Spectroscopy (1)
- Photoemission spectroscopy (1)
- Photoemissionselektronenmikroskopie (1)
- Photofragmentation (1)
- Photoisomerisation (1)
- Photoisomerization (1)
- Photolumineszenzspektroskopie (1)
- Photonic crystals (1)
- Photonische Kristalle (1)
- Photonischer Kristall (1)
- Photophysics (1)
- Photophysik (1)
- Photoviltaics (1)
- Phthalocyanin (1)
- Plasmon propagation (1)
- Plasmonics (1)
- Plasmonik (1)
- Plastic electronics (1)
- Pluronic (1)
- Polarisation (1)
- Polarisationspulsformung (1)
- Polymere (1)
- Polymerhalbleiter (1)
- Polymerlösung (1)
- Proton-Proton-Streuung (1)
- Präzisionsmessung (1)
- Pulse Shaping (1)
- Pulsed laser deposition (1)
- Pulswelle (1)
- Pulswellengeschwindigkeit (1)
- Pump-Probe-Technik (1)
- Pumpen <Laser> (1)
- QA-Methode (1)
- Quanten anomalen Hall-Effekt (1)
- Quanten-Kontrolle (1)
- Quanten-Monte-Carlo (1)
- Quanten-Spin-Hall-Effekt (1)
- Quantenkaskadenlaser (1)
- Quantenkontrolle (1)
- Quantensensorik (1)
- Quantentransport (1)
- Quantentrog (1)
- Quantum Control (1)
- Quantum Plasmonics (1)
- Quantum Spin Hall Effect (1)
- Quasi-1D Elektronensysteme (1)
- Quasi-eindimensionale Organische Metalle (1)
- REELS (1)
- RF Coil arrays (1)
- RF Coils (1)
- Radikalanionensalz (1)
- Radiologische Diagnostik (1)
- Raman spectroscopy (1)
- Ramanspektroskopie (1)
- Rare earth manganites (1)
- Real-time MRI (1)
- Recombination Dynamics (1)
- Relaxation Parameter Mapping in Magnetic Resonance Imaging (1)
- Relaxometrie (1)
- Renewable energies (1)
- Resonante Tunneldioden (1)
- Resonanz-Tunneldiode (1)
- Rissbildung (1)
- Rissverlauf (1)
- Ru(0001) (1)
- Ruthenium (1)
- Röntgenemission (1)
- Röntgenmikroskopie (1)
- Röntgenstrahlung (1)
- Röntgenstreuung (1)
- SANS (1)
- SARPES (1)
- SAXS (1)
- SENSE (1)
- SET (1)
- SQUID (1)
- STM (1)
- STO (1)
- Salzlösung (1)
- Scanning microscopy (1)
- Schwere-Fermionen-System (1)
- Schwingungsphase (1)
- Schwingungszustand (1)
- Self-assembly (1)
- Self-organization (1)
- Seltene Erden (1)
- Seltenerdverbindungen (1)
- Semiconductors (1)
- Semiconductors physics (1)
- Shapiro (1)
- Signal Formation (1)
- Silicium (1)
- Silicium Fehlstelle (1)
- Siliciumdioxid (1)
- Siliciumhalbleiter (1)
- Siliciumvakanz (1)
- Silicon Carbide (1)
- Silicon vacancy (1)
- Siliconsuboxide (1)
- Siliziumkarbid (1)
- Simultanbildgebung (1)
- Single Molecule Imaging (1)
- Single-Molecule Transistor (1)
- Singlet Fission (1)
- Skalierung (1)
- Soft matter (1)
- Solar Cell (1)
- Solar cell (1)
- Solar energy (1)
- Solar-Cell (1)
- Solartechnik (1)
- Solarzellen (1)
- Spectromicroscopy (1)
- Spectroscopy (1)
- Spektrale Interferenz (1)
- Spezifische Wärme (1)
- Spin Defekt (1)
- Spin Drehmoment (1)
- Spin-Hall-Effekt (1)
- Spin-Orbit Coupling (1)
- Spin-Orbit-Torque (1)
- Spin-Phonon Kopplung (1)
- Spin-Transfer-Drehmoment (1)
- Spin-eins-System (1)
- Spin-phonon coupling (1)
- Spindiffusion (1)
- Spindrehmoment Bauteil (1)
- Spinelectronic (1)
- Spinelektronik (1)
- Spinell (1)
- Spinentropie (1)
- Spinkette (1)
- Spinpolarisation (1)
- Spintronic (1)
- Spinventil (1)
- Spiral imaging (1)
- Sprödbruch (1)
- Standardmodell (1)
- Standardmodell <Elementarteilchenphysik> (1)
- Starke Kopplung (1)
- Step Ru surface (1)
- Stoßwelle (1)
- Strain (1)
- Strom-Spannungs-Kennlinie (1)
- Strontiumtitanat (1)
- Strontiumvanadate (1)
- Strukturbildung (1)
- Störstelle (1)
- Störstellen (1)
- Störstellenverteilung (1)
- Suboxid (1)
- Supercapacitor (1)
- Superconductor (1)
- Superkondensator (1)
- Superparamagnetische Eisenoxid Kontrastmittel (1)
- Superprisma (1)
- Supersymmetrie (1)
- Supersymmetry (1)
- Supraleiter (1)
- Surface (1)
- Surface Raman spectroscopy (1)
- Surface plasmon (1)
- Surface states (1)
- Symmetrie (1)
- TGRAPPA (1)
- THz (1)
- TI (1)
- TOSSI (1)
- TSC (1)
- TTF (1)
- Teilchendetektor (1)
- Tensor (1)
- Tensor Tomography (1)
- Terahertz (1)
- Terahertz spectroscopy (1)
- Teststand (1)
- Theorie (1)
- Thermodynamik (1)
- Thermoelektrischer Effekt (1)
- Thermoelektrischer Generator (1)
- Thermokraft (1)
- Thermometrie (1)
- Thermometry (1)
- Thin Films (1)
- Thin intermetallic films (1)
- Thiophen (1)
- Thiophenderivate (1)
- Tieftemperatur (1)
- Time-of-flight energy recording (1)
- Time-resolved photoluminescence (1)
- Tissue Engineering (1)
- Tomografie (1)
- Topolectrics (1)
- Topological Insulator (1)
- Topological Insulators (1)
- Topological insulator (1)
- Topological insulators (1)
- Topological metamaterial (1)
- Topological superconductivity (1)
- Topologische Laser (1)
- Topologische Supraleitung (1)
- Topology (1)
- Transient Electrical Methods (1)
- Transitzeitmethode (1)
- Transporteigenschaft (1)
- Triangular lattice (1)
- Tumor (1)
- Tumors (1)
- Tunneldioden (1)
- Tunneleffekt (1)
- Tunneling spectroscopy (1)
- Tunnelspektroskopie (1)
- Turbo Spin-Echos (1)
- Twin Domains (1)
- Twin Suppression (1)
- UHECR (1)
- UPS (1)
- UV-VIS (1)
- UV-VIS-Spektroskopie (1)
- Ultrafast Spectroscopy (1)
- Ultrafast X-Ray Science (1)
- Ultrakurze Laserpulse (1)
- Ultrakurzer Lichtpuls (1)
- Ultrakurzzeit Spektroskopie (1)
- Ultraschnelle Informationsverarbeitung (1)
- Ultraschnelle Röntgenstrahlung (1)
- Undersampling (1)
- Unterabtastung (1)
- VCAM (1)
- VIS-Spektroskopie (1)
- Vapor-liquid-solid (1)
- Vektorboson (1)
- Vektorfeldformer (1)
- Vektorfeldkontrolle (1)
- Vergleich (1)
- Verzerrung (1)
- Volkov-Pankratov states (1)
- Volume Reconstruction (1)
- Vulkanologie (1)
- W-Boson (1)
- Wachstum (1)
- Wachstumsprozess (1)
- Waste Heat Recovery (1)
- Wechselwirkung (1)
- Wechselwirkung intensiver Laserpulse mit Materie (1)
- Weiche Materie (1)
- Weiche Röntgenstrahlung (1)
- Wellenleiter (1)
- Wiedemann Franz law (1)
- Wiedemann-Franz-Gesetz (1)
- Winkel- und spin-aufgelöste Photoelektronenspektroskopie im harten Röntgenbereich (1)
- Winkelaufgelöste Photoemission mit harten Röntgenstrahlen (1)
- Winkelaufgelöste Photoemissionspektroskopie (1)
- Wirkungsquerschnitt (1)
- Wärmeleitung (1)
- Wärmeübertragung (1)
- X-Ray Dark-Field (1)
- X-ray microscopy (1)
- XAS (1)
- XMCD (1)
- XPEEM (1)
- YAG-Laser (1)
- Yu-Shiba-Rusinov-Zustände (1)
- Z Boson (1)
- Z boson (1)
- Zinc oxide (1)
- Zinkoxid (1)
- ZnMnSe (1)
- ZnO (1)
- ZnTe (1)
- Zwillingsbildung (1)
- aberration (1)
- adaptive Kontrolle (1)
- adaptive Optimierung (1)
- adaptive Pulsformung (1)
- adaptive control (1)
- adaptive optics (1)
- adaptive pulse shaping (1)
- adsorption (1)
- adsorption-induced deformation (1)
- alloy Hubbard model (1)
- angle resolved photoemission spectroscopy (1)
- angle-resolved photoelectron spectroscopy (1)
- angle-resolved photoemission (1)
- anorganic (1)
- anorganische geordnete Halbleiter (1)
- antimony (1)
- aqueous solution (1)
- atomar kleine Lücke (1)
- atomic-scale gap (1)
- ballistic transport (1)
- band structure (1)
- barium titanate (1)
- binding energy (1)
- biomaterials (1)
- bismuth (1)
- boron-nitride (1)
- bulk heterojunction (1)
- cantilever-bending technique (1)
- capacity (1)
- carbon nanotube (1)
- carrier-induced ferromagnetism (1)
- chalcogenide (1)
- charge carrier generation (1)
- charge carrier transport in organic thin films (1)
- charge transfer satellites (1)
- charge transfer state (1)
- coherent imaging (1)
- compound semiconductor (1)
- computed tomography (CT) (1)
- condensed matter (1)
- conjugated polymers (1)
- correlation (1)
- cosmic rays (1)
- coulomb coupled quantum dots (1)
- coupler (1)
- crystal growth (1)
- dSTORM (1)
- deformation (1)
- density functional theory (1)
- devices (1)
- dilatometer (1)
- dilute magnetic semiconductors (1)
- diluted magnetic Semiconductor (1)
- diluted magnetic semiconductors (1)
- distant dipolar field (1)
- dynamic imaging (1)
- dynamische Bildgebung (1)
- eindimensionale Systeme (1)
- electrical excitation (1)
- electromigration (1)
- electron tunneling (1)
- electron-hole scattering (1)
- electron-vibration coupling (1)
- electronic correlations (1)
- electronic transport in nanocrystalline materials (1)
- elektrische Anregung (1)
- elektronische Struktur (1)
- energy-dispersive (1)
- epitaxial growth (1)
- epr spectroskopy (1)
- evolutionary algorithm (1)
- evolutionary optimization (1)
- exciton (1)
- exciton binding energy (1)
- experimental and theoretical determination of electron density (1)
- experimental physics (1)
- explosive volcanism (1)
- explosiver Vulkanismus (1)
- faceting (1)
- femtosecond pulse shaping (1)
- femtosecond pulses (1)
- ferroelectricity (1)
- ferromagnetic resonance (1)
- ferromagnetische Halbleiter (1)
- ferromagnetische Resonanz (1)
- four-wave mixing (1)
- fragmentation (1)
- fragmentation energy (1)
- free electron laser (1)
- g-Faktor (1)
- gamma-ray bursts (1)
- geminale Rekombination (1)
- glycine peptides (1)
- grating interferometry (1)
- growth (1)
- h-dimerization (1)
- hadronic Recoil (1)
- hadronischer Rückstoß (1)
- half-Heusler (1)
- halfmetals (1)
- hard x-ray photoemission (1)
- heat conversion (1)
- heat transfer (1)
- heteromolecular interfaces (1)
- heterorganic monolayer (1)
- heterostructures (1)
- heterovalent heterointerfaces (1)
- high field (1)
- high field MRI (1)
- high harmonic generation (1)
- high-harmonic generation (1)
- high-intensity laser-matter interaction (1)
- high-order harmonic generation (1)
- high-speed photography (1)
- image quality (1)
- imaging (1)
- impact experiments (1)
- in vivo MR-Spektroscopy (1)
- in-line phase contrast (1)
- in-situ (1)
- inclusive cross section (1)
- induced (1)
- induced superconductivity (1)
- infrared spectroscopy (1)
- insulator (1)
- interface conductivity (1)
- interfaces (1)
- intermolecular zero-quantum coherence (1)
- interplay of surface states (1)
- inverse photoemission (1)
- ion-specific effects (1)
- ionenspezifische Effekte (1)
- iron oxide contrast agent (1)
- josephson junction (1)
- kagome lattice (1)
- konjugiert (1)
- lamellar micelles (1)
- laser (1)
- light-matter interaction (1)
- liquid cell (1)
- liquid-metal-jet (1)
- liquid-metal-jet anode X-ray source (1)
- liquids (1)
- low-temperature magnetotransport (1)
- magnetic (1)
- magnetic oxide (1)
- magnetic resonance (1)
- magnetic semiconductors (1)
- magnetic topological insulator (1)
- magnetische Anisotropie (1)
- magnetization (1)
- magnetotransport (1)
- medical device (1)
- melt electrowriting (1)
- memory (1)
- mercury (1)
- mesoscopic (1)
- mesoscopic transport (1)
- mesoskopisch (1)
- mesoskopischer Transport (1)
- metal-to-insulator transition (1)
- methanofullerenes (1)
- micro pattern gaseous detectors (1)
- micromegas detectors (1)
- microscopy (1)
- mode matching (1)
- modeling (1)
- molecular movie (1)
- molecular transport (1)
- molecule-metal interfaces (1)
- monodispersity (1)
- mouse (1)
- mram (1)
- multi-messenger physics (1)
- multi-spin flip (1)
- multi-terminal devices (1)
- multiple Botenteilchen (1)
- muon (1)
- muon spectrometer (1)
- nano (1)
- nano optics (1)
- nanoantenna (1)
- nanolithography (1)
- nanoparticles (1)
- nanostructured (1)
- nanostructures (1)
- nanowires (1)
- narrow-gap semiconductor (1)
- near-field optics (1)
- neural networks (1)
- neutrinos (1)
- neutron reflectometry (1)
- nexafs (1)
- nichtgeminale Rekombination (1)
- nichtkarthesische Bildgebung (1)
- non-Cartesian imaging (1)
- non-Cartesian trajectories (1)
- non-destructive testing (1)
- nonlinear optics (1)
- nonlinear spectroscopy (1)
- ntcda (1)
- one-dimensional (1)
- one-dimensional systems (1)
- open circuit voltage (1)
- optical antenna (1)
- optical antennas (1)
- optical polarization conversion (1)
- optics (1)
- orbital tomography (1)
- organic bulk heterojunction solar cell (1)
- organic molecules (1)
- organic photovoltaics (1)
- organic semicondcutors (1)
- organic thin films (1)
- organic thin-films (1)
- organic-inorganic hybrid nanostructures (1)
- organic-metal interfaces (1)
- organische Halbleiter (1)
- organische Solarzellen (1)
- organische ungeordnete Halbleiter (1)
- oxide (1)
- oxide heterostructure (1)
- oxidische Heterostruktur (1)
- oxygen vacancies (1)
- p-Halbleiter (1)
- parallel imaging (1)
- phase coherence (1)
- phase dynamics (1)
- phonon (1)
- photo-CELIV (1)
- photocurrent (1)
- photoemission (1)
- phthalocyanine (1)
- pi-conjugated (1)
- plasmon (1)
- plasmon group velocity (1)
- plasmonic waveguides (1)
- polarization (1)
- polarization pulse shaping (1)
- polyacene (1)
- printed paper photovoltaics (1)
- proximity effect (1)
- pulsed ODMR (1)
- pulswave velocity (1)
- quantitative epr (1)
- quantum Monte Carlo (1)
- quantum control (1)
- quantum interference (1)
- quantum metrology (1)
- quantum optics (1)
- quantum sensing (1)
- quantum spin Hall effect (1)
- quantum transport (1)
- quantum well (1)
- quantum-dots (1)
- quasi-one-dimensional organic metals (1)
- resistive micromegas (1)
- resolution enhancement (1)
- resonant inelastic x-ray scattering (1)
- resonant photoelectron spectroscopy (1)
- resonant tunneling (1)
- resonant tunneling diode (1)
- resonant tunneling diodes (1)
- resonante Tunneldioden (1)
- s-shape (1)
- salt solutions (1)
- scanning tunneling spectroscopy (1)
- secondary phases (1)
- selected area growth (1)
- self-assembled monolayer (SAM) (1)
- self-assembly (1)
- semiconductor (1)
- semiconductor interfaces (1)
- shadow mask (1)
- signal to noise ratio (1)
- silicon vacancy (1)
- single crystalline (1)
- single molecule microscopy (1)
- single-crystalline Ru surfaces (1)
- sodium (1)
- soft x-ray photoemission (1)
- solar cell (1)
- specific heat (1)
- spin Hall effect (1)
- spin Injektion (1)
- spin entropy (1)
- spin injection (1)
- spin torque (1)
- spin torque device (1)
- spin transport (1)
- spin valve (1)
- spin-orbit-coupling (1)
- spin-orbit-interaction (1)
- spin-orbit-torque (1)
- spin-resolved ARPES (1)
- spin-transfer torque (1)
- spindiffusion (1)
- spintronic (1)
- spintronik (1)
- standard model (1)
- strong coupling (1)
- sub-micron (1)
- sub-mikrometer (1)
- subcutaneous implanation (1)
- super-resolution (1)
- superconductivity (1)
- superparamagnetische Eisenoxid Kontrastmittel (1)
- superprism (1)
- surface plasmon (1)
- surface preparation (1)
- surface states (1)
- synthetic MRI (1)
- telluride (1)
- test facility (1)
- thermoelectric generator (1)
- thermoelectrics (1)
- thermopower (1)
- thin film (1)
- time-of-flight mass spectrometry (1)
- time-resolved (1)
- topological (1)
- topological analysis (1)
- topological superconductor (1)
- topological surface states (1)
- topologische Analyse (1)
- trARPES (1)
- transport gap (1)
- trap distribution (1)
- trap states (1)
- triangular lattice (1)
- tunneling diodes (1)
- twin suppression (1)
- two-dimensional electron gas (1)
- two-dimensional spectroscopy (1)
- ultra high vacuum (1)
- ultra-short laser pulses (1)
- ultrafast optics (1)
- ultrafast spectroscopy (1)
- ultrakurz (1)
- ultraschnelle Optik (1)
- ultrashort (1)
- vacancy (1)
- vapor-liquid-solid (1)
- variable density sampling (1)
- vascular cell adhesion molecules (1)
- vaskuläre Adhäsionsmoleküle (1)
- vector-field control (1)
- vector-field shaper (1)
- vibronic electronic excitation (1)
- vis spectroscopy (1)
- wavefront (1)
- waveguides (1)
- winkelaufgelöste Photoelektronenspektroskopie (1)
- worm-like micelles (1)
- wässrige Lösung (1)
- x-ray absorption spectroscopy (1)
- x-ray emission (1)
- x-ray emission spectroscopy (1)
- x-ray imaging (1)
- x-ray inline phase contrast (1)
- x-ray magnetic circular dichroism (1)
- x-ray micro computed tomography (1)
- x-ray microscopy (1)
- x-ray spectroscopy (1)
- Übergangsmetall (1)
- Übergangsmetalldichalkogenide (1)
Institute
- Physikalisches Institut (209) (remove)
Sonstige beteiligte Institutionen
- ATLAS Collaboration (1)
- Biomedizinische NMR Forschungs GmbH am Max-Planck-Institut fuer biophysikalische Chemie (1)
- CERN (1)
- CERN (Geneva, Switzerland) (1)
- Department of Cellular Therapies, University of Navarra, Pamplona, Spain (1)
- Department of X-ray Microscopy, University of Würzburg, Würzburg, Germany (1)
- Experimental Physics V, University of Wuerzburg (1)
- LMU München (1)
- MRB Research Center for Magnetic-Resonance-Bavaria (1)
- Siemens Corporate Technology Munich (1)
ResearcherID
- D-1250-2010 (1)
In this work we investigate magnetic resonant tunneling diode (RTD) structures for spin manipulation. All-II-VI semiconductor RTD structures based on [Zn,Be]Se are grown by molecular beam epitaxy. We observe a strong, magnetic field induced, splitting of the resonance peaks in the I-V characteristics of RTDs with [Zn,Mn]Se diluted magnetic semiconductors (DMS) quantum well. The splitting saturates at high fields and has strong temperature dependence. A phonon replica of the resonance is also observed and has similar behaviour to the peak. We develop a model based on the giant Zeeman splitting of the spin levels in the DMS quantum well in order to explain the magnetic field induced behaviour of the resonance.
Very small, thioglycerol (TG)-capped CdS nanoparticles were synthesized by a wet chemical technique and investigated in the framework of this thesis. Also glutathione-capped particles were investigated for a comparison of the capping agents. High-resolution photoelectron spectroscopy using high-brilliance synchrotron radiation was applied as the major tool for the characterization of these particles. Additionally, the particles were investigated with UV-VIS absorption spectroscopy, XPS using a laboratory source, valence band photoemission spectroscopy (VBPES), near-edge x-ray absorption spectroscopy (NEXAFS), and micro-Raman spectroscopy to address various aspects of the particles. In the beginning, an overview on size quantization effects is given to create a theoretical background behind the work presented in this thesis. Furthermore, an overview of various conventional techniques for size determination is presented. Exact information about size, shape and size distribution of nanoparticles is not yet achievable because of experimental limitations of the various size determination methods. Nanoparticles, with a range of sizes from 1.1 to 4. 2 nm, were synthesized using non-aqueous preparation and a TG capping. It is demonstrated that the use of the non-aqueous wet chemical synthesis method enables the production of very small particles and prohibits the aging of the particles. Furthermore, TG capping leads to a significant improvement for a narrow size distribution. Moreover, the results are very reproducible with TG capping and non-aqueous synthesis. Monodispersed particles can be produced by a size selective precipitation method, however, the reproducibility is questionable due to the aqueous medium of the synthesis in this case. High-resolution photoemission measurements on the small particles, i.e., 1.1 nm (CdS-A), 1.4 nm (CdS-B), 1.7 nm (CdS-C), and 1.8 nm (CdS-D, glutathione-capped), revealed five components as constituents of the S 2p signal after a careful data evaluation. Furthermore, it was observed that the particles with different sizes and capping show differences in the photoemission spectra and also in the beam damage behaviour. The different components of CdS-B were assigned as S atoms with different Cd neighbors, S atoms from thiol and S atoms in a partially oxidized state, based on the observed intensity changes of these components as a function of photon energy and beam damage, and on previous photoemission work on CdS nanoparticles [23, 45]. Furthermore, it was found that this assignment cannot be directly transferred to other particles. A new approach of structural model-based photoemission intensity calculations in comparison with the experimental data is presented. This enables us to understand subtle features in the photoemission spectra, in particular the intensity changes of the different components as a function of photon energy and beam exposure. This approach is especially applied to CdS-B (as some structural information for this particle is avialable from XRD), using three different structural models. It is found that a structural model with 33 S atoms can explain the experimental intensity changes of CdS-B. Furthermore, it is found that the photoemission spectra can be used to determine the particle size indirectly, as other plausible models show significant deviation from the experimental data. To study the various aspects by calculations, such as the influence of the particle shape and of the value of the mean free path, a program developed with L. Weinhardt and O. Fuchs is used for the intensity calculations. In order to determine a reasonable value of the mean free path for the used photon energies, two different equations from previous reports (Seah et al. and Powell et al.) are applied. As average mean free path values for the two photon energies we chose 5.5 ± 2 Å (254 eV) and 14 ± 2 Å (720 eV). The program calculation confirms the result of simple “manual” calculations of the different models. Moreover, it is tested that the value of , used in the calculations does not produce any significant influence on the calculation results. Another interesting feature is derived from the calculations that a model with a rather round shape produces similar intensity ratios for the different components to those of the data. Thus this new approach of analysis of photoemission spectra offers a way to determine particle sizes and to some extent to give an impression of the approximate particle shape. Furthermore, it is observed that the electronic band gap is larger compared to the optical band gap, which was attributed to an enhanced electron-hole correlation for optical absorption in small particles. The XPS experiments performed in the laboratory using an x-ray tube, show that the thin films produced from a freshly synthesized nanoparticle solution are fairly homogeneous and non-charging. Moreover, annealing experiments indicated that TG-capped particles posses less thermal stability as compared to MPA-capped particles. It was demonstrated that beam-induced effects play a major role. However, the knowledge of the time scale for such effects gives the possibility to record photoemission spectra with fairly good signal quality and to extrapolate to zero radiation damage. Further, particles with different sizes and capping show different beam damage behaviour. The thin film preparation by electrophoresis results in significant changes in the spectrum indicating agglomeration, while the drop-deposition technique points towards spectral changes on the rim of the sample, which can be avoided by focusing the radiation to the centre of the deposited dried drop. Micro-Raman experiments carried out in collaboration with C. Dem, Dr. M. Schmitt and Prof. W. Kiefer exhibited major differences in the spectra of nanoparticles as compared to those of the capping molecule thioglycerol. For instance, the absence of the S-H vibrational modes indicates the consumption or removal of all unreacted capping molecules. There is definitely a need for further detailed investigations concerning various interesting aspects of this work. For instance, it would be of significance to extend the program calculations to more models. Also more information about the band gap opening has to be gathered in order to find out the reason for the larger electronic band gap as compared to the optical band gap. The photoemission analysis approach using a model calculation has to be extended to differently prepared nanoparticles, in particular, to address the differences in the location of the various species in the particle as a function of preparation. The efforts of XRD simulations by C. Kumpf et al. [50] may reveal significant new information about the particle size and the size distribution. It can be expected that the program calculations, if extended to more models, can prove the potential of photoelectron spectroscopy to serve as a tool for size and shape determination of nanoparticles, which is a new contribution to the investigation of nanoparticles.
In a first aspect of this work, the development of photonic crystal based widely tunable laser diodes and their monolithic integration with photonic crystal based passive waveguide and coupler structures is explored theoretically and experimentally. In these devices, the photonic crystal is operated in the photonic bandgap which can be used for the realization of effective reflectors and waveguide structures. Such tunable light sources are of great interest for the development of optical network systems that are based on wavelength division multiplexing. In a second aspect of this work, the operation of a photonic crystal block near the photonic band edge is investigated with respect to the so-called superprism effect. After a few introductory remarks that serve to motivate this work, chapter 3 recapitulates some aspects of semiconductor lasers and photonic crystals that are essential for the understanding of this work so that the reader should be readily equipped with the tools to appreciate the results presented in this work.
The subject of this work has been the investigation of dynamical processes that occur during and after the interaction of matter with pulses of femtosecond laser radiation. The experiments presented here were performed in the gas phase and involve one atomic and several model molecular systems. Absorption of femtosecond laser radiation by these systems induces an electronic excitation, and subsequently their ionization, photofragmentation or isomerization. The specific adjustment of the excitation laser field properties offers the possibility to manipulate the induced electronic excitation and to influence the formation of the associated photoproducts. From the perspective of the employed spectroscopic methods, the development of photoelectron spectroscopy and its implementation in laser control experiments has been of particular interest in this thesis. This technique allows for a most direct and intuitive observation of electronic excitation dynamics in atomic as well as in complex polyatomic molecular systems. The propagation of an intermediate electronic transient state, associated to the formation of a particular photoproduct, can be interrogated by means of its correlation to a specific state of the atomic or molecular continuum. Such correlations involve the autoionization of the transient state, or by means of a second probe laser field, a structural correlation, as summarized by the Koopman's theorem (section 2.4.1). The technique of adaptive femtosecond quantum control has been the subject of development in our group for many years. The basic method, by which the temporal profile of near-infrared laser pulses at a central wavelength of 800 nm, can be adjusted, is a programmable femtosecond pulse-shaper that comprises of a zero dispersion compressor and a commercial liquid crystal modulator (LCD). This experimental arrangement was realized prior to this thesis and served as a starting point to extend the pulse-shaping technique to the ultraviolet spectral region. This technological development was realized for the purposes of the experiments presented in Chapter 5. It involves a combination of the LCD-pulse-shaper with frequency up-conversion techniques on the basis of producing specifically modulated laser pulses of central wavelength 266 nm. Furthermore, the optical method X-FROG had to be developed in order to characterize the often complex structure of generated ultraviolet pulses. In the adaptive control experiments presented in this work, the generated femtosecond laser pulses could be automatically adjusted by means of specifically addressing the 128 independent voltage parameters of the programmable liquid-crystal modulator. Additionally a machine learning algorithm was employed for the cause of defining laser pulse-shapes that delivered the desired (optimal) outcome in the investigated laser interaction processes. In Chapter 4, the technique of feedback-controlled femtosecond pulse shaping was combined with time-of-flight mass spectroscopy as well as photoelectron spectroscopy in order to investigate the multiphoton double ionization of atomic calcium. A pronounced absolute enhancement of the double ionization yield was obtained with optimized femtosecond laser pulses. On the basis of the measured photoelectron spectra and of the electron optimization experiments, a non-sequential process was found, which plays an important role in the formation of doubly charged Calcium ions. Then in Chapter 5, the dynamics following the pp* excitation of ethylene-like molecules were investigated. In this context, the model molecule stilbene was studied by means of femtosecond photoelectron spectroscopy. Due to the simplicity of its chemical structure, stilebene is one of the most famous models used in experimental as well as theoretical studies of isomerization dynamics. From the time-resolved experiments described in that chapter, new spectroscopic data involving the second excited electronic state S2 of the molecule were acquired. The second ethylenic product was the molecule tetrakis (dimethylamino) ethylene (TDMAE). Due to the presence of numerous lone pair electrons on the four dimethylamino groups, TDMAE exhibits a much more complex structure than stilbene. Nevertheless, previously reported studies on the dynamics of TDMAE provided vital information for planning and conducting a successful optimisation control experiment of the wavepacket propagation upon the (pp*) S1 excited potential surface of the molecule. Finally, in Chapter 6 the possibility of employing femtosecond laser pulses as an alternative method for activating a metallocene molecular catalyst was addressed. By means of an adaptive laser control scheme, an optimization experiment was realized. There, the target was the selective cleavage of one methyl-ligand of the model catalyst (Cp)^2Zr(CH3)^2, which induces a catalytic coordination position on the molecule. The spectroscopic studies presented in that chapter were performed in collaboration to the company BASF A.G. and constitute a proof-of principle attempt for a commercial application of the adaptive femtosecond quantum control technique.
The availability of coherent soft x-rays through the nonlinear optical process of high-harmonic generation allows for the monitoring of the fastest events ever observed in the laboratory. The attosecond pulses produced are the fundamental tool for the time-resolved study of electron motion in atoms, molecules, clusters, liquids and solids in the future. However, in order to exploit the full potential of this new tool it is necessary to control the coherent soft x-ray spectra and to enhance the efficiency of conversion from laser light to the soft x-ray region in the harmonic-generation process. This work developed a comprehensive approach towards the optimization of the harmonic generation process. As this process represents a fundamental example of \emph{light}--\emph{matter} interaction there are two ways of controlling it: Shaping the generating laser \emph{light} and designing ideal states of \emph{matter} for the conversion medium. Either of these approaches was closely examined. In addition, going far beyond simply enhancing the conversion process it could be shown that the qualitative spectral response of the process can be modified by shaping the driving laser pulse. This opens the door to a completely new field of research: Optimal quantum control in the attosecond soft x-ray region---the realm of electron dynamics. In the same way as it is possible to control molecular or lattice vibrational dynamics with adaptively shaped femtosecond laser pulses these days, it will now be feasible to perform real-time manipulation of tightly bound electron motion with adaptively shaped attosecond light fields. The last part of this work demonstrated the capability of the herein developed technique of coherent soft-x-ray spectral shaping, where a measured experimental feedback was used to perform a closed-loop optimization of the interaction of shaped soft x-ray light with a sulfur hexafluoride molecule to arrive at different control objectives. For the optimization of the high-harmonic-generation process by engineering the conversion medium, both the gas phase and the liquid phase were explored both in experiment and theory. Molecular media were demonstrated to behave more efficiently than commonly used atomic targets when elliptically polarized driving laser pulses are applied. Theory predicted enhancement of harmonic generation for linearly polarized driving fields when the internuclear distance is increased. Reasons for this are identified as the increased overlap of the returning electron wavefunction due to molecular geometry and the control over the delocalization of the initial electronic state leading to less quantum-mechanical spreading of the electron wavepacket during continuum propagation. A new experimental scheme has been worked out, using the method of molecular wavepacket generation as a tool to enhance the harmonic conversion efficiency in `pump--drive' schemes. The latter was then experimentally implemented in the study of high-harmonic generation from water microdroplets. A transition between the dominant laser--soft-x-ray conversion mechanisms could be observed, identifying plasma-breakdown as the fundamental limit of high-density high-harmonic generation. Harmonics up to the 27th order were observed for optimally laser-prepared water droplets. To control the high-harmonic generation process by the application of shaped laser light fields a laser-pulse shaper based on a deformable membrane mirror was built. Pulse-shape optimization resulted in increased high-harmonic generation efficiency --- but more importantly the qualitative shape of the spectral response could be significantly modified for high-harmonic generation in waveguides. By adaptive optimization employing closed-loop strategies it was possible to selectively generate narrow (single harmonics) and broad bands of harmonic emission. Tunability could be demonstrated both for single harmonic orders and larger regions of several harmonics. Whereas any previous experiment reported to date always produced a plateau of equally intense harmonics, it has been possible to demonstrate ``untypical'' harmonic soft x-ray spectra exhibiting ``switched-off'' harmonic orders. The high degree of controllability paves the way for quantum control experiments in the soft x-ray spectral region. It was also demonstrated that the degree of control over the soft x-ray shape depends on the high-harmonic generation geometry. Experiments performed in the gas jet could not change the relative emission strengths of neighboring harmonic orders. In the waveguide geometry, the relative harmonic yield of neighboring orders could be modified at high contrast ratios. A simulation based solely on the single atom response could not reproduce the experimentally observed contrast ratios, pointing to the importance of propagation (phase matching) effects as a reason for the high degree of controllability observed in capillaries, answering long-standing debates in the field. A prototype experiment was presented demonstrating the versatility of the developed soft x-ray shaping technique for quantum control in this hitherto unexplored wavelength region. Shaped high-harmonic spectra were again used in an adaptive feedback loop experiment to control the gas-phase photodissociation reaction of SF$_6$ molecules. A time-of-flight mass spectrometer was used for the detection of the ionic fragments. The branching ratios of particular fragmentation channels could be varied by optimally shaped soft x-ray light fields. Although in one case only slight changes of the branching ratio were possible, an optimal solution was found, proving the sufficient technical stability of this unique coherent soft-x-ray shaping method for future applications in optimal control. Active shaping of the spectral amplitude in coherent spectral regions of $\sim$10~eV bandwidth was shown to directly correspond to shaping the temporal features of the emerging soft x-ray pulses on sub-femtosecond time scales. This can be understood by the dualism of frequency and time with the Fourier transformation acting as translator. A quantum-mechanical simulation was used to clarify the magnitude of temporal control over the shape of the attosecond pulses produced in the high-harmonic-generation process. In conjunction with the experimental results, the first attosecond time-scale pulse shaper could thus be demonstrated in this work. The availability of femtosecond pulse shapers opened the field of adaptive femtosecond quantum control. The milestone idea of closed-loop feedback control to be implemented experimentally was expressed by Judson and Rabitz in their seminal work titled ``Teaching lasers to control molecules''. This present work extends and turns around this statement. Two fundamentally new achievements can now be added, which are ``Teaching molecules to control laser light conversion'' and ``Teaching lasers to control coherent soft x-ray light''. The original idea thus enabled the leap from femtosecond control of molecular dynamics into the new field of attosecond control of electron motion to be explored in the future. The \emph{closed}-loop approach could really \emph{open} the door towards fascinating new perspectives in science. Coming back to the introduction in order to close the loop, let us reconsider the analogy to the general chemical reaction. Photonic reaction control was presented by designing and engineering effective media (catalysts) and controlling the preparation of educt photons within the shaped laser pulses to selectively produce desired photonic target states in the soft x-ray spectral region. These newly synthesized target states in turn could be shown to be effective in the control of chemical reactions. The next step to be accomplished will be the control of sub-femtosecond time-scale electronic reactions with adaptively controlled coherent soft x-ray photon bunches. To that end a time-of-flight high-energy photoelectron spectrometer has recently been built, which will now allow to directly monitor electronic dynamics in atomic, molecular or solid state systems. Fundamentally new insights and applications of the nonlinear interaction of shaped attosecond soft x-ray pulses with matter can be expected from these experiments.
Summary The nature of the chemical bond is a topic under constant debate. What is known about individual molecular properties and functional groups is often taught and rationalized by explaining Lewis structures, which, in turn, make extensive use of the valence concept. The valence concept distinguishes between electrons, which do not participate in chemical interactions (core electrons) and those, which do (single, double, triple bonds, lone-pair electrons, etc.). Additionally, individual electrons are assigned to atomic centers. The valence concept is of paramount success: It allows the successful planning of chemical syntheses and analyses, it explains the behavior of individual functional groups, and, moreover, it provides the “language” to think of and talk about molecular structure and chemical interactions. The resounding success of the valence concept may be misleading to forget its approximative character. On the other hand, quantum mechanics provide in principle a quantitative description of all chemical phenomena, but there is no discrimination between electrons in quantum mechanics. From the quantum mechanical point of view there are only indistinguishable electrons in the field of the nuclei, i.e., it is impossible to assign a given electron to a particular center or to ascribe a particular purpose to individual electrons. The concept of indistinguishability of micro particles is founded on the Heisenberg uncertainty relation, which states, that wavepackets diverge in the 6N dimensional phase space, such that individual trajectories can not be identified. Hence it is a deep-rooted and approved physical concept. As an introduction to the present work density partitioning schemes were discussed, which divide the total molecular density into chemically meaningful areas. These partitioning schemes are intimately related to either the concepts of bound atoms in a molecule (as in the Atoms In Molecules theory (AIM) according to Bader or as in the Hirshfeld partitioning scheme) or to the concept of chemical structure in the sense of Lewis structures, which divide the total molecular density into core and valence density, where the valence density is split up again into bonding and non-bonding electron densities. Examples are early and recent loge theories, the topological analysis by means of the Electron Localization Function (ELF), and the Natural Bond Orbital (NBO) approach. Of these partitioning schemes, the theories according to Bader (AIM), to Becke and Edgecomb (ELF) and according to Weinhold (NBO and Natural Resonance Theory, NRT), respectively, were reviewed in detail critically. Points of criticism were explicated for each of the mentioned theories. Since theoretically derived electron densities are to be compared to experimentally derived densities, a brief introduction into the theory of X-ray di®raction experiments was given and the multipole formalism was introduced. The procedure of density refinement was briefly discussed. Various suggestions for improvements were developed: One strategy would be the employment of model parameters, which are to a maximum degree mutually orthogonal, with the object of minimizing correlations among the model parameters, e.g., to introduce nodal planes into the radial functions of the multipole model. A further suggestion involves the guidance of the iterative refinement procedure by an extremum principle, which states, that when di®erent solutions to the least squares minimization problem are available with about the same statistical measures of quality and with about the same residual density, then the solution is to prefer, which yields a minimum density at the bond critical point (BCP) and a maximum polarity in terms of the ratio of distances between the BCP and the nuclei. This suggestion is based on the well known fact, that the bond polarity (in terms of the ratio of distances between the BCP and the respective nuclei) is underestimated in the experiment. Another suggestion for including physical constraints is the explicit consideration of the virial theorem, e.g., by evaluating the integration of the Laplacian over the entire atomic basins and comparing this value to zero and to the value obtained from the integration of the electron gradient field over the atomic surface. The next suggestion was to explicitly use the electrostatic theorem of Feynman (often also denoted as Hellmann-Feynman theorem), which states, that the forces onto the nuclei can be calculated from the purely classical electrostatic forces of the electron distribution and the nuclei distribution. For a stationary system, these forces must add to zero. This also provides an internal quality criterion of the density model. This can be performed in an iterative way during the refinement procedure or as a test of the final result. The use of the electrostatic theorem is expected to reduce significantly correlations among static density parameters and parameters describing vibrations, since it is a valuable tool to discriminate between physically reasonable and artificial static electron densities. All of these mentioned suggestions can be applied as internal quality criteria. The last suggestion is based on the idea to initiate the experimental refinement with a set of model parameters, which is, as much as possible close to the final solution. This can be achieved by performing periodic boundary conditions calculations, from which theoretically created files are obtained, which contain the Miller indices (h, k, l) and the respective intensity I. This file is used for a model parameter estimation (refinement), which excludes vibrations. The resulting parameters can be used for the experimental refinement, where, in a first step, the density parameters are fixed to determine the parameters describing vibrations. For a fine tuning, again the electrostatic theorem and the other above mentioned suggestions could be applied. Theoretical predictions should not be biased by the method of computation. Therefore the dependence of the density analyzing tools on the level of calculation (method of calculation/basis set) and on the substituents in complex chemical bonding situations were evaluated in the second part of the present work. A number of compounds containing formal single and double sulfur nitrogen bonds was investigated. For these compounds, experimental data were also available. The calculated data were compared internally and with the experimental results. The internal comparison was drawn with regard to questions of convergency as well as with regard to questions of consistency: The resulting molecular properties from NBO/NRT analyses were found to be very stable, when the geometries were optimized at the respective level of theory. This stability is valid for variations in the methods of calculation as well as for variations in the basis set. Only the individual resonance weights of the contributing Natural Lewis Structures differed considerably depending on the level of calculation and depending on the substituents. However, the deviations were in both cases to a large extent within a limit which preserves the descending order of the leading resonance structure weights. The resulting bond orders, i.e., the total, covalent and ionic bond order from NRT calculations, were not affected by the shift in the resonance weights. The analysis of the bond topological parameters resulted in a discrimination between insensitive parameters and sensitive parameters. The stable parameters do neither depend strongly on the method of calculation nor on the basis set. Only minor variation occurs in the numerical values of these parameters, when the level of calculation is changed or even when other functional groups (H, Me, or tBu) are employed, as long as the methods of calculation do not drop considerably below a standard level. The bond descriptors of the sulfur nitrogen bonds were found to be also stable with respect to the functional groups R = H, R = Me, and R = tBu. Stable parameters are the bond distance, the density at the bond critical point (BCP) and the ratio of distances between the BCP and the nuclei A and B, which varies clearly when considering the formal bond type. For very small basis sets like the 3-21G basis set, this characteristic stability collapses. The sensitive parameters are based on the second derivatives of the density with respect to the coordinates. This is in accordance with the well known fact, that the total second derivative of the density with respect to the coordinates is a strongly oscillating function with positive as well as negative values. A profound deviation has to be anticipated as a consequence of strong oscillations. lambda3, which describes the local charge depletion in the direction of the interaction line, is the most varying parameter. A detailed analysis revealed that the position of the BCP in the rampant edge of the Laplacian distribution is responsible for the sensitivity of the numerical value of lambda3 in formal double bonds. Since the slope of the Laplacian assumes very high values in its rampant edge, a tiny displacement of the BCP leads already to a considerable change in lambda3. This instability is not a failure of the underlying theory, but it yields de facto to a considerable dependence of sensitive bond topological properties on the method of calculation and on the applied basis sets. Since the total second derivative is important to judge on the nature of the bond in the AIM theory (closed shell interactions versus shared interactions), the changes in lambda3 can lead to differing chemical interpretations. The comparison of theoretically derived bond topological properties of various sulfur nitrogen bonds provides the possibility to measure the self consistency of this data set. All data sets clearly exhibit a linear correlation between the bond distances and the density at the BCP on one hand and between the bond distances and the Laplacian values at the BCP on the other hand. These correlations were almost independent of the basis set size. In this context, the linear regression has to be regarded exclusively as a descriptive statistics tool. There is no correlation anticipated a priori. The formal bond type was found to be readily deducible from the theoretically obtained bond topological descriptors of the model systems. In this sense, the bond topological properties are self consistent despite of the numerical sensitivity of the derivatives, as exemplified above. Often, calculations are performed with the experimentally derived equilibrium geometries and not with optimized ones. Applying this approach, the computationally costly geometry optimizations are saved. Following this approach the bond topological properties were calculated using very flexible basis sets and employing the fixed experimental geometry (which, of course, includes the application of tBu groups). Regression coe±cients similar to those from optimized geometries were obtained for correlations between bond distances and the densities at the BCP as well as for the correlation between bond distances and the Laplacian at the BCP, i.e. the approach is valid. However, the data points scattered less and the coe±cient of correlation was clearly increased when geometry optimizations were performed beforehand. The comparison between data obtained from theory and experiment revealed fundamental discrepancies: In the data set of bond topological parameters from the experiment, the behavior of only 2 out of 3 insensitive parameters was comparable to the behavior of the theoretically obtained values, i.e. theoretical and experimental bond distances as well as theoretical and experimental densities at the BCP correlate. From the theoretically obtained data it was easy to deduce the formal bond type from the position of the BCP, since it changed in a systematic manner. The respective experimentally obtained values were almost constant and did not change systematically. For the SN bonds containing compounds, the total second derivative assumes exclusively negative values in the experiment. Due to the different internal behavior, experimentally and theoretically sensitive bond topological values could not be compared directly. The qualitative agreement in the Laplacian distribution, however, was excellent. In the third and last part of this work, the application to chemical systems follows. Formal hypervalent molecules, i.e. molecules where some atoms are considered to hold more than 8 electrons in their valence shell, were investigated. These were compounds containing sulfur nitrogen bonds (H(NtBu)2SMe, H2C{S(NtBu)2(NHtBu)}2, S(NtBu)2 and S(NtBu)3) and a highly coordinated silicon compound. The set of sulfur nitrogen compounds also contained a textbook example for valence expansion, the sulfur triimide. For these molecules, experimental reference values were available from high resolution X-ray experiments. The experimental results were in the case of the sulfur triimide not unique. Furthermore, from the experimental bond topological data no definite conclusion about the formal bonding type could be drawn. The situation of sulfur nitrogen bonds in the above mentioned set of molecules was analyzed in terms of a geometry discussion and by means of a topological analysis. The methyl-substituted isolated molecules served as model compounds. For the interpretation of the bonding situation additional NBO/NRT calculations were preformed for the sulfur nitrogen compounds and an ELF calculation and analysis was performed for the silicon compound. The ELF analysis included not only the presentation and discussion of the ELF-isosurfaces (eta = 0.85), but also the investigation of populations of disynaptic valence basins and the percentage contributions to these populations of the individual atoms when the disynaptic valence basins are split into atomic contributions according to Bader’s partitioning scheme. The question of chemical interest was whether hypervalency is present in the set of molecules or not. In the first case the octet rule would be violated, in the second case Pauling’s verdict would be violated. While the concept of hypervalency is well established in chemistry, the violation of Pauling’s verdict is not. The quantitative numbers of the sensitive bond topological values from theory and experiment were not comparable, since no systematic relationship between the experimentally and theoretically determined sensitive bond descriptors was found. However, the insensitive parameters are in good agreement and the qualitative Laplacian distribution is, with few exceptions, in excellent agreement. The formal bonding type was deduced from experimental and theoretical topological data by considering the number and shape of valence shell charge concentrations in proximity to the sulfur and nitrogen centers. The results from NBO/NRT calculations confirmed the findings. All employed density analyzing tools AIM, ELF and NBO/NRT coincided in describing the bonding situation in the formally hypervalent molecules as highly polar. A comparison and analysis of experimentally and theoretically derived electron densities led consistently to the result, that regarding this set of molecules, hypervalency has to be excluded unequivocally.
Adaptive femtosecond quantum control has proven to be a very successful method in many different scientific fields like physics, chemistry or biology. Numerous quantum systems and in particular molecules undergoing chemical reactions have been controlled using shaped femtosecond laser pulses. This method allows to go beyond simple observation and to obtain active control over quantum--mechanical systems. It uses interference phenomena in the time and/or frequency domain to achieve selectivity. The shaped femtosecond laser pulses employed in this scheme have until recently been purely linearly polarized. Therefore, they only address the scalar properties of light--matter interaction and neglect the vectorial character of both the dipole moment $\vec{\mu}$ and the electric field $\vec{E}(t)$. Especially in the quantum control of chemical reactions the investigated systems ---the molecules--- are three dimensional and exhibit complex spatio--tempo\-ral dynamics. With the help of polarization--shaped laser pulses one is now able to follow these dynamics in both, time and spatial direction, and can therefore reach a new level of control over quantum--mechanical systems. In this work, the generation of polarization--shaped laser pulses has been implemented in an optical setup. It requires no interferometric stability as a result of the identical beam path for both polarization components. Dual--channel spectral interferometry was employed as experimental pulse characterization and a mathematical description of the time--dependent polarization state of these pulses was given. The polarization modulation of the shaped pulses by subsequent optical elements was investigated and some solutions to minimize these modulations were presented. Jones matrix calculus with experimentally calibrated matrices was implemented to account for all polarization distortions from the LCD to the position of the experiment and for full characterization of the generated pulse shapes. Adaptive polarization shaping was demonstrated in a purely optical realization of the learning--loop concept. The learning algorithm was able to find the needed linear polarization in order to maximize second harmonic generation in a nonlinear optical crystal. The closed--loop configuration has proven to be capable to clear up more complicated polarization distortion, which was introduced using a multiple order half--wave plate designed for use at a wavelength of 620~nm. The additional deformation of the spectral phase through dispersion in a 10~cm long SF10 glass rod has also been compensated automatically. After these optical demonstration experiments ultrafast polarization shaping was applied to control a quantum system. Polarization sensitivity was shown in pump--probe measurements of the multiphoton ionization of potassium dimer molecules K$_2$. This sensitivity was exploited in a more general way in a learning--loop experiment with polarization--shaped laser pulses. A qualitatively new level of control was demonstrated using the time--dependent polarization state of laser pulses as an active agent. This polarization control was applicable even in randomly aligned molecules, which is a significant simplification of the experimental setup. In addition to these polarization control experiments, the three dimensional dynamics of molecules were also investigated and controlled. The \textit{cis--trans} photoisomerization of NK88 was studied in the liquid phase by transient absorption spectroscopy. The isomerization reaction efficiency was enhanced as well as reduced using linearly polarized laser pulses at 400~nm shaped in spectral phase and amplitude. This experiment demonstrates the ability to control the large scale motion of complex molecular groups with shaped femtosecond laser pulses. The modification of the molecular geometry can be regarded as a first step towards control of chirality in photochemistry. Especially with the successful demonstration of polarization quantum control, which is required in the theoretical models for the selective conversion of one enantiomer into the other, the way is paved towards coherent control of chirality. Besides these fascinating applications of polarization shaping it should now also be possible to extend the wavelength range of these pulses. Apart from second harmonic generation in order to reach the ultraviolet region intra-pulse difference frequency generation could be an option to open the mid-infrared spectral range for polarization shaping. With these new wavelength regions numerous new perspectives arise for quantum control using polarization--shaped laser pulses. Referring once more to the novel of Edwin A. Abbott presented in the introduction one could say that shaped femtosecond pulses really have left Flatland. Or to put it into the words of the sphere, when it teaches the square about the perception of dimensions: \begin{quote} ``Look yonder [...] in Flatland thou hast lived; of Lineland thou hast received a vision; thou hast soared with me to the heights of Spaceland;'' \hfill Edwin A.~Abbott~\cite{abbott1884}, 1884 \end{quote}
Shadow Mask assisted Molecular Beam Epitaxy (SMMBE) is a technique enabling selected area epitaxy of semiconductor heterostructures through shadow masks. The objective of this work was the development of the SMMBE technique for the reliable fabrication of compound semiconductor nanostructures of high structural and optical quality. In order to accomplish this, technological processes have been developed and optimized. This, in combination with model calculations of the basic kinetic growth processes has enabled the fabrication of high quality quantum structures. A high spatial precision and control of the incidence regions of the molecular beams during the SMMBE process are required for the fabrication of nanostructures. One of the technological developments to this effect, which has substantially enhanced the versatility of SMMBE, is the introduction of a new type of freestanding shadow masks: Growth through such a mask with different incidence angles of the molecular beams is equivalent to employing different mechanical masks, but is much more accurate since the precision of mechanical alignment is limited. A consistent model has been developed, which successfully explains the growth dynamics of molecular beam epitaxy through shadow masks. The redistribution of molecular fluxes under shadow masks may affect the growth rates on selected areas of the substrate drastically. In the case of compound semiconductors, reactions between the constituent species play important roles in controlling the growth rates as a function of the growth parameters. The predictions of the model regarding the growth of II-VI and III-V compounds have been tested experimentally and the dependence of the growth rates on the growth parameters has been verified. Moreover, it has been shown, that selected area epitaxy of II-VI and III-V compounds are governed by different surface kinetics. Coexisting secondary fluxes of both constituent species and the apparent non-existence of surface diffusion are characteristic for SMMBE of II-VI compounds. In contrast, III-V SMMBE is governed by the interplay between secondary group-V flux and the surface migration of group-III adatoms. In addition to the basic surface kinetic processes described by the model, the roles of orientation and strain-dependent growth dynamics, partial shadow, and material deposition on the mask (closure of apertures) have been discussed. The resulting advanced understanding of the growth dynamics (model and basic experiments) in combination with the implementation of technical improvements has enabled the development and application of a number of different processes for the fabrication of both II-VI and III-V nanostructures. In addition to specific material properties, various other phenomena have been exploited, e.g., self-organization. It has been shown that, e.g., single quantum dots and quantum wires can be reliably grown. Investigations performed on the SMMBE nanostructures have demonstrated the high positional and dimensional precision of the SMMBE technique. Bright cathodoluminescence demonstrates that the resulting quantum structures are of high structural and optical quality. In addition to these results, which demonstrate SMMBE as a prospective nanofabrication technique, the limitations of the method have also been discussed, and various approaches to overcome them have been suggested. Moreover, propositions for the fabrication of complex quantum devices by the multiple application of a stationary shadow mask have been put forward. In addition to selected area growth, the shadow masks can assist in etching, doping, and in situ contact definition in nanoscale selected areas. Due to the high precision and control over the dimensions and positions of the grown structures, which at the same time are of excellent chemical, crystal, and optical quality, SMMBE provides an interesting perspective for the fabrication of complex quantum devices from II-VI and III-V semiconductors.
This work is investigating the electronic structure of organic thin films. A central question in this respect is the influence of the interaction between the molecules in the condensed phase and the interaction at metal-organic interfaces on the electronic properties. For this purpose the experimental methods Photoelectron Spectroscopy (PES) and Near Edge X-ray Absorption Finestructure Spectroscopy (NEXAFS) were applied with highest energy resolution. In addition, ab initio calculations were performed for the theoretical simulation of NEXFAS spectra. The investigation is mainly focussing on thin, vacuum sublimated films of aromatic model molecules with oxygen-containing functional groups (NTCDA, PTCDA, NDCA, BPDCA and ANQ) and Ag(111) surfaces. Due to their large, delocalised p-systems these molecules have very interesting properties for their application in electronic devices. Due to the high energy resolution of third generation synchrotron sources the vibronic fine structure in the NEXAFS spectra of these large molecules could be resolved for the first time in the condensed phase. A comparison of the data of the different molecules provides interesting insight into the coupling between electronic transition and vibronic excitation. Although for these molecules a variety of different vibronic modes exist, the NEXAFS data show that preferentially only on mode couples to each electronic transition. The high-resolution PES spectra of the molecules NTCDA, PTCDA, NDCA, BPDCA and ANQ show distinct differences thus providing a fingerprint for each investigated substance. A comparative analysis of the spectra enabled us to define the 1s binding energies of all chemically different carbon and oxygen atoms. Additional structures in the spectra can be assigned as shake-up satellites. The five molecules are an ideal model system for the investigation of fundamental aspects of core electron spectroscopy, such as initial and final state effects and satellites, that are influenced by the intra- and intermolecular electron distribution in the ground and core ionized state. An important aspect in this thesis is the spectroscopic investigation of structurally different NTCDA monolayer phases on the Ag(111) surface. Marked differences in the electronic structures of the different phases, that can be assigned to differences in the metal-adsorbate interaction, could be demonstrated by XPS and NEXAFS. The substrate bonding can be characterized as chemisorptive for both, the compressed as well as the relaxed NTCDA monolayer, which can be unambiguously deduced from the analysis of satellite structures in the O 1s and C 1s XPS spectra. These satellites are due to dynamic screening by charge transfer from the substrate. The NEXAFS data show consistently, that the NTCDA LUMO becomes partly occupied upon adsorption. Highly interesting phase transitions into disordered low-temperature phases occur upon cooling to 160 K for both, the compressed and the relaxed NTCDA monolayer. Thereby, the adsorbate-substrate bonding is increased and the NTCDA LUMO becomes completely occupied. This can be observed in the NEXAFS data, where transitions involving LUMO final states are quenched. Simultaneously, the XPS data show a distinctly decreased intensity of unscreened photoemission states due to enhanced charge transfer screening. In addition, a hysteresis behaviour could be demonstrated for the phase transition of the relaxed monolayer by temperature dependent NEXAFS experiments and the hysteresis curve was determined. The hysteresis could be quantified to approx. 20 K. From SPA-LEED experiments the activating energy for the phase transition of the relaxed monolayer upon cooling could be determined to 60 meV. Finally, a NEXAFS investigation of polyethylene samples with different comonomer content is presented. Differences in the absorption spectra between samples with different comonomer content could be unambiguously assigned to the different crystallinities of the samples by heating a highly crystalline sample in situ close to the melting temperature. Ab initio calculations on a model matrix of butane molecules show, that the spectra of crystalline and amorphous polyethylene differ distinctly due to the intermolecular interaction, which can be observed best for resonances with strong Rydberg character. Thus, the differences in the PE spectra can be explained by the superposition of the signatures of crystalline and amorphous moieties, that are mixed according to the respective crystallinity.