Refine
Has Fulltext
- yes (56)
Is part of the Bibliography
- yes (56)
Document Type
- Journal article (34)
- Preprint (20)
- Doctoral Thesis (2)
Language
- English (56) (remove)
Keywords
- boron (56) (remove)
Institute
Sonstige beteiligte Institutionen
Twisted boron-based biradicals featuring unsaturated C\(_2\)R\(_2\) (R=Et, Me) bridges and stabilization by cyclic (alkyl)(amino)carbenes (CAACs) were recently prepared. These species show remarkable geometrical and electronic differences with respect to their unbridged counterparts. Herein, a thorough computational investigation on the origin of their distinct electrostructural properties is performed. It is shown that steric effects are mostly responsible for the preference for twisted over planar structures. The ground-state multiplicity of the twisted structure is modulated by the σ framework of the bridge, and different R groups lead to distinct multiplicities. In line with the experimental data, a planar structure driven by delocalization effects is observed as global minimum for R=H. The synthetic elusiveness of C\(_2\)R\(_2\)-bridged systems featuring N-heterocyclic carbenes (NHCs) was also investigated. These results could contribute to the engineering of novel main group biradicals.
The NHC-stabilised diboryne (B\(_2\)(SIDep)\(_2\); SIDep=1,3-bis(2,6-diethylphenyl)imidazolin-2-ylidene) undergoes a high-yielding P−P bond activation with tetraethyldiphosphine at room temperature to form a B\(_2\)P\(_2\) heterocycle via a diphosphoryldiborene by 1,2-diphosphination. The heterocycle can be oxidised to a radical cation and a dication, respectively, depending on the oxidant used and its counterion. Starting from the planar, neutral 1,3-bis(alkylidene)-1,3-diborata-2,4-diphosphoniocyclobutane, each oxidation step leads to decreased B−B distances and loss of planarity by cationisation. X-ray analyses in conjunction with DFT and CASSCF/NEVPT2 calculations reveal closed-shell singlet, butterfly-shaped structures for the NHC-stabilised dicationic B\(_2\)P\(_2\) rings, with their diradicaloid, planar-ring isomers lying close in energy.
Adducts of the parent boraphosphaketene H\(_2\)BPCO and their decarbonylative insertion chemistry
(2021)
The first examples of Lewis base adducts of the parent boraphosphaketene (H\(_2\)B-PCO) and their cyclodimers are prepared. One of these adducts is shown to undergo mild decarbonylation and phosphinidene insertion into a B−C bond of a borole, forming very rare examples of 1,2-phosphaborinines, B/P isosteres of benzene. The strong donor properties of these 1,2-phosphaborinines are confirmed by the synthesis of their π complexes with the Group 6 metals.
The 1,3-bis(tricyanoborane)imidazolate anion 1 was obtained in high yield from lithium imidazolate and B(CN)\(_3\)−pyridine adduct. Anion 1 is chemically very robust and thus allowed the isolation of the corresponding H\(_5\)O\(_2\)\(^+\) salt. Furthermore, monoanion 1 served as starting species for the novel dianionic N-heterocyclic carbene (NHC), 1,3-bis(tricyanoborane)imidazoline-2-ylidenate anion 3 that acts as ditopic ligand via the carbene center and the cyano groups at boron. First reactions of this new NHC 3 with methyl iodide, elemental selenium, and [Ni(CO)\(_4\)] led to the methylated imidazolate ion 4, the dianionic selenium adduct 5, and the dianionic nickel tricarbonyl complex 6. These NHC derivatives provide a first insight into the electronic and steric properties of the dianionic NHC 3. Especially the combination of properties, such as double negative charge, different coordination sites, large buried volume and good σ-donor and π-acceptor ability, make NHC 3 a unique and promising ligand and building block.
Dithiophene‐Fused Oxadiborepins and Azadiborepins: A New Class of Highly Fluorescent Heteroaromatics
(2021)
Access to dithiophene‐fused oxadiborepins and the first azadiborepins attained via a modular synthesis route are presented. The new compounds emit intense blue light, some of which demonstrate fluorescence quantum yields close to unity. Cyclic voltammetry (CV) revealed electrochemically reversible one‐electron reduction processes. The weak aromatic character of the novel 1,2,7‐azadiborepin ring is demonstrated with in‐depth theoretical investigations using nucleus‐independent chemical shift (NICS) scans and anisotropy of the induced current density (ACID) calculations.
Boron's unique position in the Periodic Table, that is, at the apex of the line separating metals and nonmetals, makes it highly versatile in chemical reactions and applications. Contemporary demand for renewable and clean energy as well as energy‐efficient products has seen boron playing key roles in energy‐related research, such as 1) activating and synthesizing energy‐rich small molecules, 2) storing chemical and electrical energy, and 3) converting electrical energy into light. These applications are fundamentally associated with boron's unique characteristics, such as its electron‐deficiency and the availability of an unoccupied p orbital, which allow the formation of a myriad of compounds with a wide range of chemical and physical properties. For example, boron's ability to achieve a full octet of electrons with four covalent bonds and a negative charge has led to the synthesis of a wide variety of borate anions of high chemical and electrochemical stability—in particular, weakly coordinating anions. This Review summarizes recent advances in the study of boron compounds for energy‐related processes and applications.
The substitution of selected CC units by their isoelectronic and isosteric BN units in π−conjugated organic compounds (BN/CC isosterism), especially polycyclic aromatic hydrocarbons (PAHs), has emerged as a viable strategy to produce novel organic–inorganic hybrid materials with structural similarities to their all-carbon congeners, but in many cases with intriguing properties and functions.
In the first two chapters the synthesis and properties of novel BNB-doped phenalenyls, dithienoazadiborepins and dithienooxadiborepins are presented. The optoelectronic properties of these new building blocks can be effectively tuned by variation of the incorporated Ar (Mes, Tip, FMes) and R groups (H, Me, i-Pr, t-Bu, Ph). Theoretical investigations, including NICS (Nucleus Independent Chemical Shift) scans and AICD (Anisotropy of the Induced Current Density) calculations, have been performed which provide insight into their aromatic or antiaromatic character, respectively.
The incorporation of BP units, on the other hand, which are valence isoelectronic with BN and CC, into unsaturated organic compounds, has been scarcely studied, though the potential of the resulting BCP hybrid materials for electronic applications has been recognized quite recently. Main chain conjugated polymers featuring BP fragments in the backbone are unknown so far. The first molecular model compounds for a BP analogue of the conjugated polymer poly(p-phenylene vinylene) (PPV) are presented in chapter 3. Theoretical investigations revealed that the Mes* group to fully planarizes the phosphorus center, increasing the B=P double bond character and enabling conjugation over the BP unit. Different synthetic approaches to the molecular model compounds have been investigated and a viable synthetic strategy was found.
cAAC‐Stabilized 9,10‐diboraanthracenes—Acenes with Open‐Shell Singlet Biradical Ground States
(2020)
Narrow HOMO–LUMO gaps and high charge‐carrier mobilities make larger acenes potentially high‐efficient materials for organic electronic applications. The performance of such molecules was shown to significantly increase with increasing number of fused benzene rings. Bulk quantities, however, can only be obtained reliably for acenes up to heptacene. Theoretically, (oligo)acenes and (poly)acenes are predicted to have open‐shell singlet biradical and polyradical ground states, respectively, for which experimental evidence is still scarce. We have now been able to dramatically lower the HOMO–LUMO gap of acenes without the necessity of unfavorable elongation of their conjugated π system, by incorporating two boron atoms into the anthracene skeleton. Stabilizing the boron centers with cyclic (alkyl)(amino)carbenes gives neutral 9,10‐diboraanthracenes, which are shown to feature disjointed, open‐shell singlet biradical ground states.
Three different perfluoroalkylated borafluorenes (\(^{F}\)Bf) were prepared and their electronic and photophysical properties were investigated. The systems have four trifluoromethyl moieties on the borafluorene moiety as well as two trifluoromethyl groups at the ortho positions of their exo‐aryl moieties. They differ with regard to the para substituents on their exo‐aryl moieties, being a proton \(^{F}\)Xyl\(^{F}\)Bf, \(^{F}\)Xyl: 2,6‐bis(trifluoromethyl)phenyl), a trifluoromethyl group (\(^{F}\)Mes\(^{F}\)Bf, \(^{F}\)Mes: 2,4,6‐tris(trifluoromethyl)phenyl) or a dimethylamino group (p‐NMe\(_{2}\)‐\(^{F}\)Xyl\(^{F}\)Bf, p‐NMe\(_{2}\)‐\(^{F}\)Xyl: 4‐(dimethylamino)‐2,6‐bis(trifluoromethyl)phenyl), respectively. All derivatives exhibit extraordinarily low reduction potentials, comparable to those of perylenediimides. The most electron‐deficient derivative \(^{F}\)Mes\(^{F}\)Bf was also chemically reduced and its radical anion isolated and characterized. Furthermore, all compounds exhibit very long fluorescent lifetimes of about 250 ns up to 1.6 μs; however, the underlying mechanisms responsible for this differ. The donor‐substituted derivative p‐NMe\(_{2}\)‐\(^{F}\)Xyl\(^{F}\)Bf exhibits thermally activated delayed fluorescence (TADF) from a charge‐transfer (CT) state, whereas the \(^{F}\)Mes\(^{F}\)Bf and FXylFBf borafluorenes exhibit only weakly allowed locally excited (LE) transitions due to their symmetry and low transition‐dipole moments.
The reductive coupling of an N-heterocyclic carbene (NHC) stabilized (dibromo)vinylborane yields a 1,2-divinyl- diborene, which, although isoelectronic to a 1,3,5-triene, displays no extended p conjugation because of twisting of the C\(_2\)B\(_2\)C\(_2\) chain. While this divinyldiborene coordinates to copper(I) and platinum(0) in an η\(^2\)-B\(_2\) and η\(^4\)-C\(_2\)B\(_2\) fashion, respectively, it undergoes a complex rearrangement to an η\(^4\)-1,3-diborete upon complexation with nickel(0).
An N-heterocyclic-carbene-stabilized diboryne undergoes rapid, high-yielding and catalyst-free hydroamina- tion reactions with primary amines, yielding 1-amino-2-hydro- diborenes, which can be considered boron analogues of enamines. The electronics of the organic substituent at nitrogen influence the structure and further reactivity of the diborene product. With electron-rich anilines, a second hydroamination can occur at the diborene to generate 1,1-diamino-2,2-dihy- drodiboranes. With isopropylamine, the electronic influence of the alkyl substituent upon the diborene leads to an unprece- dented boron-mediated intramolecular N-dearylation reaction of an N-heterocyclic carbene unit.
Five compounds containing boron–boron multiple bonds are shown to undergo hydrophosphination reactions with diphenylphosphine in the absence of a catalyst. With diborenes, the products obtained are highly dependent on the substitution pattern at the boron atoms, with both 1,1- and 1,2- hydrophosphinations observed. With a symmetrical diboryne, 1,2-hydrophosphination yields a hydro(phosphino)diborene. The different mechanistic pathways for the hydrophosphination of diborenes are rationalised with the aid of density functional theory calculations.
We present herein an in‐depth study of complexes in which a molecule containing a boron‐boron triple bond is bound to tellurate cations. The analysis allows the description of these salts as true π complexes between the B−B triple bond and the tellurium center. These complexes thus extend the well‐known Dewar‐Chatt‐Duncanson model of bonding to compounds made up solely of p block elements. Structural, spectroscopic and computational evidence is offered to argue that a set of recently reported heterocycles consisting of phenyltellurium cations complexed to diborynes bear all the hallmarks of \(\pi\)‐complexes in the \(\pi\)‐complex/metallacycle continuum envisioned by Joseph Chatt. Described as such, these compounds are unique in representing the extreme of a metal‐free continuum with conventional unsaturated three‐membered rings (cyclopropenes, azirenes, borirenes) occupying the opposite end.
Diplatinum A‐frame complexes with a bridging (di)boron unit in the apex position were synthesized in a single step by the double oxidative addition of dihalo(di)borane precursors at a bis(diphosphine)‐bridged Pt\(^{0}\)\(_{2}\) complex. While structurally analogous to well‐known μ‐borylene complexes, in which delocalized dative three‐center‐two‐electron M‐B‐M bonding prevails, theoretical investigations into the nature of Pt−B bonding in these A‐frame complexes show them to be rare dimetalla(di)boranes displaying two electron‐sharing Pt−B σ‐bonds. This is experimentally reflected in the low kinetic stability of these compounds, which are prone to loss of the (di)boron bridgehead unit.
The empty p\(_z\)-orbital of a three-coordinate organoboron compound leads to its electron-deficient properties, which make it an excellent π-acceptor in conjugated organic chromophores. The empty p-orbital in such Lewis acids can be attacked by nucleophiles, so bulky groups are often employed to provide air-stable materials. However, many of these can still bind fluoride and cyanide anions leading to applications as anion-selective sensors. One electron reduction generates radical anions. The π-acceptor strength can be easily tuned by varying the organic substituents. Many of these compounds show strong two-photon absorption (TPA) and two-photon excited fluorescence (TPEF) behaviour, which can be applied for e.g. biological imaging. Furthermore, these chromophores can be used as emitters and electron transporters in OLEDs, and examples have recently been found to exhibit efficient thermally activated delayed fluorescence (TADF). The three-coordinate organoboron unit can also be incorporated into polycyclic aromatic hydrocarbons. Such boron-doped compounds exhibit very interesting properties, distinct from their all-carbon analogues. Significant developments have been made in all of these areas in recent years and new applications are rapidly emerging for this class of boron compounds.
The electron‐precise binary boron subhalide species [B\(_2\)X\(_6\)]\(^{2−}\) X=F, Br, I) were synthesized and their structures confirmed by X‐ray crystallography. The existence of the previously claimed [B\(_2\)Cl\(_6\)]\(^{2−}\), which had been questioned, was also confirmed by X‐ray crystallography. The dianions are isoelectronic to hexahaloethanes, are subhalide analogues of the well‐known tetrahaloborate anions (BX\(_4\)\(^−\)), and are rare examples of molecular electron‐precise binary boron species beyond B\(_2\)X\(_4\), BX\(_3\), and [BX\(_4\)]\(^−\).
The photophysical properties (absorption, fluorescence and phosphorescence) of a series of triarylboranes of the form 4-D-C\(_6\)H\(_4\)-B(Ar)\(_2\) (D=\(^t\)Bu or NPh\(_2\); Ar=mesityl (Mes) or 2,4,6-tris(trifluoromethylphenyl (Fmes)) were analyzed theoretically using state-of-the-art DFT and TD-DFT methods. Simulated emission spectra and computed decay rate constants are in very good agreement with the experimental data. Unrestricted electronic computations including vibronic contributions explain the unusual optical behavior of 4-\(^t\)Bu-C\(_6\)H\(_4\)-B(Fmes)\(_2\) 2, which shows both fluorescence and phosphorescence at nearly identical energies (at 77 K in a frozen glass). Analysis of the main normal modes responsible for the phosphorescence vibrational fine structure indicates that the bulky tert-butyl group tethered to the phenyl ring is strongly involved. Interestingly, in THF solvent, the computed energies of the singlet and triplet excited states are very similar for compound 2 only, which may explain why 2 shows phosphorescence in contrast to the other members of the series.
A cyclic (alkyl)(amino)carbene (CAAC) has been shown to react with a covalent azide similar to the Staudinger reaction. The reaction of \(^{Me}\)CAAC with trimethylsilyl azide afforded the N‐silylated 2‐iminopyrrolidine (\(^{Me}\)CAAC=NSiMe\(_{3}\)), which was fully characterized. This compound undergoes hydrolysis to afford the 2‐iminopyrrolidine and trimethylsiloxane which co‐crystallize as a hydrogen‐bonded adduct. The N‐silylated 2‐iminopyrrolidine was used to transfer the novel pyrrolidine‐2‐iminato ligand onto both main‐group and transition‐metal centers. The reaction of the tetrabromodiborane bis(dimethyl sulfide) adduct with two equivalents of \(^{Me}\)CAAC=NSiMe\(_{3}\) afforded the disubstituted diborane. The reaction of \(^{Me}\)CAAC=NSiMe\(_{3}\) with TiCl\(_{4}\) and CpTiCl\(_{3}\) afforded \(^{Me}\)CAAC=NTiCl\(_{3}\) and \(^{Me}\)CAAC=NTiCl\(_{2}\)Cp, respectively.
The reactivity of a diruthenium tetrahydride complex towards three selected dihydroboranes was investigated. The use of [DurBH\(_{2}\)] (Dur=2,3,5,6‐Me\(_{4}\)C\(_{6}\)H) and [(Me\(_{3}\)Si)\(_{2}\)NBH\(_{2}\)] led to the formation of bridging borylene complexes of the form [(Cp\(^{*}\)RuH)\(_{2}\)BR] (Cp\(^{*}\)=C\(_{5}\)Me\(_{5}\); 1 a: R=Dur; 1 b: R=N(SiMe\(_{3}\))\(_{2}\)) through oxidative addition of the B−H bonds with concomitant hydrogen liberation. Employing the more electron‐deficient dihydroborane [3,5‐(CF\(_{3}\))\(_{2}\)‐C\(_{6}\)H\(_{3}\)BH\(_{2}\)] led to the formation of an anionic complex bearing a tetraarylated chain of four boron atoms, namely Li(THF)\(_{4}\)[(Cp\(^{*}\)Ru)\(_{2}\)B\(_{4}\)H\(_{5}\)(3,5‐(CF\(_{3}\))\(_{2}\)C\(_{6}\)H\(_{3}\))\(_{4}\)] (4), through an unusual, incomplete threefold dehydrocoupling process. A comparative theoretical investigation of the bonding in a simplified model of 4 and the analogous complex nido‐[1,2(Cp\(^{*}\)Ru)\(_{2}\)(μ‐H)B\(_{4}\)H\(_{9}\)] (I) indicates that there appear to be no classical σ‐bonds between the boron atoms in complex I, whereas in the case of 4 the B\(_{4}\) chain better resembles a network of three B−B σ bonds, the central bond being significantly weaker than the other two.
While polysulfones constitute a class of well‐established, highly valuable applied materials, knowledge about polymers based on the related sulfoximine group is very limited. We have employed functionalized diaryl sulfoximines and a p ‐phenylene bisborane as building blocks for unprecedented BN‐ and BO‐doped alternating inorganic–organic hybrid copolymers. While the former were accessed by a facile silicon/boron exchange protocol, the synthesis of polymers with main‐chain B–O linkages was achieved by salt elimination.