Refine
Has Fulltext
- yes (208)
Is part of the Bibliography
- yes (208)
Year of publication
Document Type
- Journal article (106)
- Doctoral Thesis (100)
- Conference Proceeding (1)
- Review (1)
Language
- English (208) (remove)
Keywords
- HPLC (9)
- Bioverfügbarkeit (7)
- Instrumentelle Analytik (6)
- Löslichkeit (6)
- Muscarinrezeptor (6)
- NMR-Spektroskopie (6)
- Aminosäuren (5)
- Arzneimittel (5)
- Impurity Profiling (5)
- Ligand <Biochemie> (5)
Institute
- Institut für Pharmazie und Lebensmittelchemie (208) (remove)
Sonstige beteiligte Institutionen
- Universität Belgrad, Serbien (2)
- ACC GmbH Analytical Clinical Concepts (1)
- Apotheke, Universitätsklinikum Würzburg (1)
- Bundesinstitut für Arzneimittel und Medizinprodukte (1)
- Friedrich-Schiller-Universität Jena (1)
- Helmholtz Institute for RNA-based Infection Biology (HIRI), Josef-Schneider-Straße 2/D15, DE-9708 Wuerzburg, Germany (1)
- Helmholtz Institute for RNA-based Infection Biology (HIRI), Josef-Schneider-Straße 2/D15, DE-97080 Wuerzburg, Germany (1)
- IBMP - Institut für Biomedizinische und Pharmazeutische Forschung in Nürnberg-Heroldsberg (1)
- Johns Hopkins School of Medicine (1)
- Krankenhaushygiene und Antimicrobial Stewardship, Universitätsklinikum Würzburg (1)
EU-Project number / Contract (GA) number
- 26230120009 (1)
- 296679 (1)
- 314911 (1)
- 701983 (1)
The high failure rate of new drug candidates in preclinical or clinical studies due to hepatotoxicity represents a considerable problem in the drug development. Hence, there is an urgent need to develop new approaches for early and reliable prediction of drug-induced hepatotoxicity that enables a better identification of drug candidates with high potential for toxicity at early stages of drug development. Therefore, the aim of this work was to improve the prediction of drug-induced liver injury in preclinical studies through evaluation of more reliable and sensitive biomarkers of hepatotoxicity and a better understanding of the underlying mechanistic basis for drug-induced toxicity. First, the ability of a set of potential markers (NGAL, thiostatin, clusterin, PON1) to detect early signs of liver injury was assessed in rats treated with drug candidates that were dropped from further development, in part due to toxic adverse effects in the liver. In summary, PON1 and clusterin were not consistently altered in response to liver injury and thus provide no additive information to the traditional liver enzymes in detecting drug-induced hepatotoxicity. In contrast, thiostatin and NGAL were increased in serum and urine of treated animals in a time- and dose-dependent manner. These changes correlated well with mRNA expression in the target organ and generally reflected the onset and degree of drug-induced liver injury. Receiver-operating characteristics analyses supported serum thiostatin, but not NGAL, as a better indicator of drug-induced hepatobiliary injury than conventional clinical chemistry parameters, such as ALP, ALT and AST. Although thiostatin, an acute phase protein expressed in a range of tissues, may not be specific for liver injury, our results indicate that thiostatin may serve as a sensitive, minimally-invasive diagnostic marker of inflammation and tissue damage in preclinical safety assessment. In the second part of this work, combined application of genomics profiling technology and RNAi to inhibit the pharmacological target of a drug candidate BAY16, a glucagon receptor (GCGR) antagonist, was used to determine if interference with the pharmacological target plays a role in the toxic response to BAY16, and to narrow down those molecular changes that are associated with toxicity, and not the pharmacological action of BAY16. In contrast to Bay 16, which was found to be cytotoxic at concentrations of 75 µM, silencing of the glucagon receptor did not affect cell viability in primary rat hepatocytes. Thus, it can be concluded that hepatotoxicity of Bay 16 was not related to the drugs inhibitory effect on the glucagon receptor in vitro and in vivo. These findings were supported by the fact that most of BAY16-induced changes in gene expression occurred independently of the pharmacological modulation of GCGR. These off-target effects include altered xenobiotic metabolism, oxidative stress, increased fatty acid synthesis, and alterations in cholesterol and bile acid metabolic processes. Although it was not possible to draw a final conclusion about the mechanism of BAY16 hepatotoxicity, changes in these molecular mechanisms appear contribute to progression of hepatic injury. With regard to drug safety assessment in preclinical studies, the utilization of siRNA technology in vitro represents a new approach to improve mechanistic understanding of the nature of drug’s toxicity, being either chemically mediated or due to primary or secondary pharmacological mode of action.
The aim of the present study was to design different dosage forms as carrier systems to deliver sorafenib to the lung of BXB-23 transgenic mice using different routes of administration. Three dosage forms were used one of them was an oil-in-water emulsion and the oral route was chosen for this experiment. The other delivery system was a liposome preparation for intratracheal instillation. In this case the oral route was considered as a control experiment. The last dosage form was PLGA microspheres. Before sorafenib administration it was important to develop a HPLC method to assess sorafenib absorption after its administration and to determine its concentrations in mouse serum. The HPLC method allowed sorafenib quantification in small volumes (30 µl) of mouse serum and tissues. The developed HPLC method was validated resulting in satisfactory selectivity, good linearity, good accuracy and precision over the concentration range examined. Sorafenib was successfully incorporated in a fat emulsion (o/w) using a traditional method resulting in a white homogenous emulsion and no particle aggregation was observed. Sorafenib exhibited antitumor activity on the lung adenoma in BXB-23 transgenic mice when administered orally (2 mg sorafenib per mouse) in the emulsion preparation. The determined effect was an approximately 29 % reduction in the tumor area of the adenoma foci and a proliferation reduction. In order to improve the pharmacological effects of sorafenib on the lung adenoma in BXB-23 mice, the targeting of sorafenib directly to the site of action (the lung) was an attractive concept. For this purpose the intratracheal route was used. Since sorafenib administration by instillation required incorporation of sorafenib in a dosage form suitable for its lipophilic nature, a liposome suspension was the second dosage form used. A lyophilization method was employed for sorafenib liposome preparation utilizing dilauroylphosphatidylcholine (DLPC) which is safe and tolerable for the lung. Incorporation of sorafenib in the liposomes did not influence the particle size and its distribution. The sorafenib liposomes showed high encapsulation efficiency, good stability at 4 °C for one month and satisfactory in vitro release properties and inhibited Raf-1 mediated activation of ERK in cell culture assay. In a pharmacokinetic experiment sorafenib loaded liposomes were instilled directly into the lung. The results revealed that a significant level of sorafenib was achieved in the lung tissues after 2 hours and then reduced after 48 h and remained nearly constant for one week. On the other hand, only traces of sorafenib were found in the mice serum up to 48 h. Subsequently, the pharmacological activity of sorafenib (1 mg per mouse) was studied when delivered in a liposomal suspension intratracheally to treat the lung adenoma of BXB-23 mice. The data of this experiment demonstrated that sorafenib intratracheal instillation resulted in a reduction of tumor area of adenoma foci (67 %) and an elevation of the percent of apoptotic cells. In contrast, prolongation of the treatment period did not further enhance sorafenib activity on the lung adenoma. This previous finding suggested a development of multidrug resistance (MDR) by the adenoma foci cells against sorafenib instillation, which was examined by immunohistochemistry staining. The percent of MDR positive cells was higher after two and three weeks sorafenib liposome instillation treatment than that after one week treatment. The last dosage form used for sorafenib was microspheres, which were prepared by emulsion-diffusion-evaporation method using biodegradable PLGA 50:50 resulting in a white lyophilized powder. The system was characterized physicochemically and revealed a good microspheres yield, high encapsulation efficiency, a homogenous particle size distribution and slow in vitro release of sorafenib. The other strategy studied in the present research project was gene delivery to target the lung bearing tumor of BXB-23 mice using a non-viral vector (polyethylenimine). Polyethylenimine (PEI) was used to investigate its efficiency in transfecting lung bearing tumor of BXB-23 mice model and its ability to transfect the adenoma foci cells. LacZ, which encodes Beta-galactosidase was used in the present study as a reporter gene and was complexed with PEI before delivered intravenously. A high LacZ expression in the alveolar region with some expression in the adenoma foci was observed. On contrary, a low LacZ expression in the alveoli and in the adenoma foci was achieved after instillation of the same polyplex intratracheally.
A liquid chromatography tandem mass spectrometry method for the analysis of ten kinase inhibitors (afatinib, axitinib, bosutinib,cabozantinib, dabrafenib, lenvatinib, nilotinib, osimertinib, ruxolitinib, and trametinib) in human serum and plasma for theapplication in daily clinical routine has been developed and validated according to the US Food and Drug Administration andEuropean Medicines Agency validation guidelines for bioanalytical methods. After protein precipitation of plasma samples withacetonitrile, chromatographic separation was performed at ambient temperature using a Waters XBridge® Phenyl 3.5μm(2.1×50 mm) column. The mobile phases consisted of water-methanol (9:1, v/v) with 10 mM ammonium bicarbonate as phase A andmethanol-water (9:1, v/v) with 10 mM ammonium bicarbonate as phase B. Gradient elution was applied at a flow rate of 400μL/min. Analytes were detected and quantified using multiple reaction monitoring in electrospray ionization positive mode. Stableisotopically labeled compounds of each kinase inhibitor were used as internal standards. The acquisition time was 7.0 min perrun. All analytes and internal standards eluted within 3.0 min. The calibration curves were linear over the range of 2–500 ng/mLfor afatinib, axitinib, bosutinib, lenvatinib, ruxolitinib, and trametinib, and 6–1500 ng/mL for cabozantinib, dabrafenib, nilotinib,and osimertinib (coefficients of correlation≥0.99). Validation assays for accuracy and precision, matrix effect, recovery,carryover, and stability were appropriate according to regulatory agencies. The rapid and sensitive assay ensures high throughputand was successfully applied to monitor concentrations of kinase inhibitors in patients.
The work presented in this thesis was mainly targeted at exploring the capabilities of evaporation based LC detectors as well as further alternatives for the control of impurities in substances not exhibiting a suitable chromophore for UV-detection. In the course of the work carried out, several new methods for the identification, impurities control and composition testing of APIs were elaborated. An evaporation based detector that entered into the field of pharmaceutical analysis in the recent years was the Evaporative Light Scattering Detector (ELSD). However, non-reproducible spikes were reported when injecting concentrated test solutions as they are usually required for the control of impurities. The reasons, for the appearance of these spikes as well as possibilities for their avoidance were explored in a systematic study. Moreover, the dependence of the detector sensitivity on different eluent composition, eluent flow-rate and ELSD settings was investigated. In the course of the revision of the Ph.Eur. monographs for aspartic acid and alanine, a C18 reversed phase ion-pair LC method using 1 mmol/L of perfluoroheptanoic acid as an ion-pair reagent and a charged aerosol detector (CAD) was developed and fully validated for the purity control of Asp. The method was capable of separating the organic acids and major amino acids known to occur as process related impurities. With a slight modification, the method was also applicable for the purity control of Ala. Based on the developed LC-CAD method for the impurity control of alanine, a comparative study of the performance characteristics of different evaporation based LC detectors, i.e. ELSD, CAD and the recently developed Nano Quantity Analyte Detector (NQAD) was carried out. Additionally, an MS detector and qNMR were included in this study. It was found that the control of impurities in Alanine at an ICH conform level could be ensured using LC coupled to CAD, MSD and NQAD detection as well as by the use of qNMR. In terms of performance, prize and ease of use CAD and NQAD were found to be the most suitable alternatives. In terms of repeatability and sensitivity, the CAD appeared slightly superior to the NQAD. The quality of streptomycin sulfate is not sufficiently controlled by the current Ph.Eur. monograph in that an appropriate test for the control of the related substances is missing. A study was carried out to develop a C18 reversed phase ion-pair LC method using pentafluoropropionic acid as an ion-pair reagent and a CAD for the identification and control of the related substances. The developed method allowed the separation of 21 impurities from streptomycin. Moreover, coupling of the method to MS allowed the identification of the separated impurities. The method was shown to be sufficiently sensitive to control the related substances with a disregard limit of 0.1% as it is normally applied in the Ph.Eur. for products derived from fermentation. Currently, the aescin content of horse-chestnut standardized dry extract is determined using a complex and laborious photometric determination. A more selective LC-UV assay determination for beta-aescin has been proposed for the Ph.Eur. draft monograph of horse-chestnut standardized dry extract. Possibilities were explored to further improve the LC-method using detection by CAD. It was demonstrated that by the use of a modified LC-CAD method several problems related to the differences in the UV-response of the various components contained in the active aescin fraction could be eliminated. Moreover the proposed reference standard strategy was reviewed. Eventually, it was demonstrated on the example of two different clusters of pharmacologically active peptides how low energy collision induced dissociation mass spectrometry (low energy CID-MS) can successfully be used for identification testing in pharmacopoeial monographs. In this respect, the combination of a direct confirmation of the molecular mass via the m/z-ratio of the molecule ions with structural sequence information obtained by low energy CID-MS experiments was found to deliver a higher degree of certainty of the identity of a given substance than the set of tests currently described in the monographs. A significant gain in efficiency and throughput and important reduction of the amount of sample consumed during testing were identified as being additional advantages of this approach. Taken together, it could be demonstrated on various examples how recent technological advancements in the field of analytical chemistry can contribute to improve the quality control of APIs.
Metabolic glycoengineering enables a directed modification of cell surfaces by introducing target molecules to surface proteins displaying new features. Biochemical pathways involving glycans differ in dependence on the cell type; therefore, this technique should be tailored for the best results. We characterized metabolic glycoengineering in telomerase-immortalized human mesenchymal stromal cells (hMSC-TERT) as a model for primary hMSC, to investigate its applicability in TERT-modified cell lines. The metabolic incorporation of N-azidoacetylmannosamine (Ac\(_4\)ManNAz) and N-alkyneacetylmannosamine (Ac\(_4\)ManNAl) into the glycocalyx as a first step in the glycoengineering process revealed no adverse effects on cell viability or gene expression, and the in vitro multipotency (osteogenic and adipogenic differentiation potential) was maintained under these adapted culture conditions. In the second step, glycoengineered cells were modified with fluorescent dyes using Cu-mediated click chemistry. In these analyses, the two mannose derivatives showed superior incorporation efficiencies compared to glucose and galactose isomers. In time-dependent experiments, the incorporation of Ac\(_4\)ManNAz was detectable for up to six days while Ac\(_4\)ManNAl-derived metabolites were absent after two days. Taken together, these findings demonstrate the successful metabolic glycoengineering of immortalized hMSC resulting in transient cell surface modifications, and thus present a useful model to address different scientific questions regarding glycosylation processes in skeletal precursors.
Synthesis of (RS)-5-amino-3-aryl (methyl)-pentanoic acid hydrochlorides, 3 aminomethyl-5-chloro-benzoic acid hydrochloride and (RS)-4-amino-3-(4`-ethynyl(iodo)-phenyl)-butanoic acid hydrochlorides have been accomplished. The aim of their synthesis was to evaluate their GABABR agonist activity and to derive a model which will correlate their structure with the observed pEC50. The GABABR agonist activity of the prepared compounds has been determined in functional assay based on calcium measurement in vitro using tsA cells transfected with GABAB1b/GABAB2/Gαq-z5. Reviews on the neurotransmitter receptors (ligand-gated ion channel receptors and G protein-coupled receptors), their agonists and antagonists have been given in the general part of this work. A detailed discussion on the strategy followed for the synthesis of the designed compounds as well as the starting materials and intermediates has been described and illustrated in Schemes 2-6. The synthesized compounds were evaluated for their GABABR agonist activity. Furthermore, these compounds were docked in the available 3D homology model of GABABR using the program FlexiDock implemented in SYBYL software. Subsequently, we derived a predictive model which correlates the experimentally determined pEC50 with the calculated binding energy of certain baclofen analogues and homologues. In addition, we used the program DISCO (DIStance COmparisons) implemented in SYBYL software to find the pharmacophore features of GABAB agonists.
Baclofen (1) is a potent and selective agonist for bicuculline-insensitive GABAB receptors and is used clinically as an antispastic and muscle relaxant agent. In the search for new bioactive chemical entities that bind specifically to GABAB receptors, we report here the synthesis of certain baclofen homologues, namely (R,S)-5-amino-3-arylpentanoic acid hydrochlorides (R,S)-1a–h as well as (R,S)-5-amino-3-methylpentanoic acid [(RS)-1i] to be evaluated as GABABR agonists. Compound 1a is an agonist to GABAB receptors with an EC50 value of 46 μM on tsA201 cells transfected with GABAB1b/GABAB2/Gqz5, being the most active congener among all the synthesized compounds.
Cholinesterases are important biological targets responsible for regulation of cholinergic transmission, and their inhibitors are used for the treatment of Alzheimer’s disease. To design new cholinesterase inhibitors, of different structure-based design strategies was followed, including the modification of compounds from a previously developed library and a fragment-based design approach. This led to the selection of heterodimeric structures as potential inhibitors. Synthesis and biological evaluation of selected candidates confirmed that the designed compounds were acetylcholinesterase inhibitors with \(IC_{50}\) values in the mid-nanomolar to low micromolar range, and some of them were also butyrylcholinesterase inhibitors.
Starting in the late 1990s ionic liquids (ILs) gained momentum both in academia as well as industry. ILs are defined as organic salts with a melting point below 100 °C. Active pharmaceutical ingredients (APIs) may be transferred into ILs by creating salts with a bulky counterion with a soft electron density. ILs have demonstrated the potential to tune important pharmaceutical features such as the solubility and the dissolution rate, particularly addressing the challenge of poor water soluble drugs (PWSD). Due to the tunability of ILs, modification of physico-chemical properties of APIs may be envisioned without any modifications of the chemical structure.
In the first chapter the potential as well as the limitation of ILs are discussed. The chapter commences with an overview of preparation and characterization of API-ILs. Moreover, examples for pharmaceutical parameters are presented which may be affected by IL formation, including the dissolution rate, kinetic solubility or hygroscopicity as well as biopharmaceutical performance and toxicology. The impact of IL formation on those pharmaceutically relevant features is highlighted, resulting in a blueprint for a novel formulation concept to overcome PWSD challenges without the need for structural changes of the API.
Within the second chapter the IL concept is detailed for one specific API - counterion combination. A poorly water soluble acidic API against migraine attacks was transformed into an IL in an effort to minimize the time to maximum plasma concentration (tmax) and optimize the overall bioavailability. These studies were conducted in parallel to a prodrug of the API for comparison of the IL strategy versus a strategy involving modification of the API’s structure. A significantly longer duration of API supersaturation and a 700 fold faster dissolution rate of the IL in comparison to the free acid were obtained and the underlying mechanism was elucidated. The transepithelial absorption was determined using Caco-2 cell layers. For the IL about 3 times more substance was transported in comparison to the prodrug when substances were applied as suspensions, despite the higher permeability of the prodrug, as increased solubility of the IL exceeded this effect. Cytotoxicity of the counterion was assessed in hepatic, renal and macrophage cell lines, respectively, and IC50 values were in the upper µM / lower mM range. The outcome of the study suggested the IL approach instrumental for tuning biopharmaceutical properties, without structural changes of the API as required for preparation of prodrugs. Thus the toolbox for formulation strategies of poorly water soluble drugs could be extended by an efficient concept.
The third chapter focuses on the effect of different counterions on the physico-chemical properties of an API-IL, in particular to overcome the challenge of poor water solubility. Therefore, the same poorly water soluble acidic API against migraine attacks mentioned above was combined with 36 counterions resulting in ILs and low lattice enthalpy salts (LLES). Depending on the counterions, different dissolution rates, durations of supersaturation and hygroscopicities were obtained and release profiles could be tailored from immediate to sustained release. Besides, in vitro the cytotoxicity of the counterions was assessed in three cell lines. Using molecular descriptors such as the number of hydrophobic atoms, the graph theoretical diameter and the number of positive charges of the counterion, the dissolution rate, supersaturation and hygroscopicity as well as the cytotoxicity of counterions could be adequately modeled, rendering it possible to predict properties of new LLESs.
Within the forth chapter different poorly water soluble APIs were combined with the counterion tetrabutylphosphonium (TBP) studying the impact on the pharmaceutical and physical properties of the APIs. TBP-ILs and low lattice enthalpy salts were prepared of the acidic APIs Diclofenac, Ibuprofen, Ketoprofen, Naproxen, Sulfadiazine, Sulfamethoxazole and Tolbutamide. NMR and IR spectroscopy, DSC, XRPD, DVS and dissolution rate measurements, release profiles and saturation concentration measurements were used to characterize the free acids and TBP salts as compared to the corresponding sodium salts. The TBP salts as compared to the free acids displayed lower melting points and glass transition temperatures and up to 1000 times higher dissolution rates. The increase in the dissolution rate directly correlated with the salts’ hygroscopicity, an aspect which is critically discussed in terms of pharmaceutical translation challenges. In summary TBP ILs of solid salts were proved instrumental to approach the challenge of poor water solubility. The outcome profiled tailor-made counterions as a powerful formulation strategy to address poor water solubility, hence bioavailability and ultimately therapeutic potential of challenging APIs.
In summary, a plethora of ILs and LLESs were prepared by combination of different acidic APIs and counterions. The IL and LLESs concept was compared to conventional salt and prodrug strategies. By choice of the counterion, biopharmaceutical relevant parameters were deliberately modified and release profiles were tuned ranging from immediate to prolonged release. The impact of distinct structural counterion features controlling the dissolution, supersaturation, hygroscopicity and counterion cytotoxicity were identified, correlations were presented and predictive models were built. ILs and LLESs could be proven to be a powerful concept for the formulation of poorly water soluble acidic APIs.
Most drugs are no longer produced in their own countries by the pharmaceutical companies, but by contract manufacturers or at manufacturing sites in countries that can produce more cheaply. This not only makes it difficult to trace them back but also leaves room for criminal organizations to fake them unnoticed. For these reasons, it is becoming increasingly difficult to determine the exact origin of drugs. The goal of this work was to investigate how exactly this is possible by using different spectroscopic methods like nuclear magnetic resonance and near- and mid-infrared spectroscopy in combination with multivariate data analysis. As an example, 56 out of 64 different paracetamol preparations, collected from 19 countries around the world, were chosen to investigate whether it is possible to determine the pharmaceutical company, manufacturing site, or country of origin. By means of suitable pre-processing of the spectra and the different information contained in each method, principal component analysis was able to evaluate manufacturing relationships between individual companies and to differentiate between production sites or formulations. Linear discriminant analysis showed different results depending on the spectral method and purpose. For all spectroscopic methods, it was found that the classification of the preparations to their manufacturer achieves better results than the classification to their pharmaceutical company. The best results were obtained with nuclear magnetic resonance and near-infrared data, with 94.6%/99.6% and 98.7/100% of the spectra of the preparations correctly assigned to their pharmaceutical company or manufacturer.
Spectroscopic methods were established decades ago in a wide variety of fields. This also applies to the pharmaceutical field, although they initially were mostly used for identity testing or structure elucidation only. Technical developments, such as miniaturization (NMR benchtop devices), Fourier transformations (for NMR, MIR spectroscopy) or the combination with chemometric evaluation (e.g., in Process Analytical Technology, PAT), have further increased their importance and opened up new applications. The aim of this work was to investigate further new approaches and to find new applications for already established methods and to show their benefits.
By means of MIR, NIR and NMR data and their chemometric evaluation (principal component analysis, PCA; hierarchical cluster analysis, HCA; linear discriminant analysis, LDA), possibilities were presented to successfully determine the manufacturer or the pharmaceutical company of various paracetamol preparations. In the course of this, various similarities and correlations between the preparations of individual companies could also be identified. For this purpose, a suitable sample preparation was developed for each spectroscopic method, and suitable measurement parameters in order to obtain reproducible spectra for the chemometric evaluation were determined. Furthermore, the results of the two unsupervised methods (HCA, PCA) were compared with each other. The HCA was able to confirm those of the PCA for the very most part. Additionally, through these methods it was possible to characterize many of the preparations based on clusters formed by comparable tablet compositions.
In order to be able to measure unmortared, whole tablets using the NIR spectrometer, an attachment was developed and manufactured using 3D printing. Its functionality was demonstrated by measuring and analyzing the tablets of two different batches of nine paracetamol preparations. The batches were clearly distinguished on the basis of a PCA and a significant difference was also demonstrated by means of statistical tests.
For NMR spectroscopy, a method was developed to obtain optimized "fingerprint" spectra of drug formulations. For this purpose, a 1D DOSY measurement was elaborated, in which the signals of the active ingredient could be filtered out by the appropriate choice of measurement parameters. The chemometric evaluation can thus focus on the remaining signals of the excipients, on the basis of which the preparations of the same API can be distinguished. Especially in the case of formulations that consist largely of active ingredient, data pre processing of the spectra can thus be simplified and greater importance can be assigned to the originally very small excipient signals.
A quantitative 1H NMR method was developed for the comparison of a high field spectrometer (400 MHz) with a benchtop spectrometer (80 MHz) for two finished drugs. It was shown that it is possible to obtain comparable results with both instruments, but that the influence of the excipients on the signals and the lower resolution of the benchtop instrument must be taken into account. Therefore, it was not possible to obtain comparable results without further optimization of the method for one of the active ingredients.
In the investigation of various reactions between APIs and excipients using DOSY, its usefulness as a screening method in stability testing was demonstrated. For this purpose, three different APIs and excipients were stressed together and the reaction mixtures were subsequently measured using DOSY. Based on the translational diffusion coefficient, the reaction products could be identified and distinguished from the active ingredients and the excipients used. The importance of thoughtful processing could also be demonstrated. If all peak heights are selected when evaluating signals split by direct spin spin coupling, this allows the detection of hidden signals as long as not all signals have the same diffusion coefficient. The selective selection of individual peak heights in the case of split signals also enables the evaluation of signals that overlap slightly. However, the limitations of this method were also shown when two signals overlap too much and differ too little in their diffusion coefficients.
Hence, it has been successfully demonstrated in the various projects that the new chemometric approaches, as well as the new applications of already established methods, enable in depth findings and thus have a clear added value.
Development of Novel Quinolone Amides Against the African Sleeping Sickness - A Fluorine Walk
(2019)
In recent years the transmission of the Human African Trypanosomiasis could be significantly reduced. The reported cases in 2016 reached a historic low level of 2184 cases and these achievements can be ascribed to intense control and surveillance programmes.118 However, most of the reported cases (>1000 in 2015) occurred in the Democratic Republic of the Congo and thus, need to be treated adequately. In particular, when the parasites have traversed the blood-brain barrier (BBB), treatment proved to be even more difficult. In addition, the number of cases always came in waves due to many reasons, e.g., development of resistances. Thus, it can be expected from experiences of the past that the number of cases will increase again. Hence, novel chemical entities are desperately needed in order to overcome the drawbacks which are associated with the current treatment options.
Our drug discovery approach included an initial drug repurposing strategy combined with a phenotypic screening. S. Niedermeier found novel active compounds derived from commercial fluoroquinolones. The most promising hit compound was further developed by G. Hiltensperger resulting in the lead quinolone amide GHQ168 (IC50 = 0.047 µM).
This doctoral thesis is about new insights into the SAR of the quinolone amides and the enhancement of the lead compound. Special consideration was given to the fluorine atom in the quinolone amides and how certain fluorine substitution patterns influence the antitrypanosomal activity, physicochemical properties and pharmacokinetics (i.e. ‘fluorine walk’). Moreover, the ability of the compound class crossing the BBB should be investigated. This feature is inevitable necessary in order to potentially treat African sleeping sickness stage II.
The Gould-Jacobs protocol was predominantly used for the synthesis of the quinolone core. Since former SAR studies mainly concentrated on the variation in positions 1, 3 and 7, quinolone scaffolds (2a-i) with diverse substitution patterns regarding positions 5, 6, 7 and 8 were synthesised in this thesis. The resulting quinolone amides were evaluated for their antitrypanosomal activity.
Voluminous residues in position C-5 resulted in diminished activities (compounds 13, 16 and 18) and solely small-sized moieties were tolerated. In particular the fluorine atom in position 5 revealed beneficial trypanocidal effects as shown for compounds 6 (IC50 = 0.05 µM), 8 (IC50 = 0.04 µM), and 24 (IC50 = 0.02 µM). Furthermore, having fluorine only in position 5 of the quinolone core could considerably reduce the cytotoxic effects (CC50 >100 µM, SI = >2000 for 6). Hence, the 5-fluoro-substituted quinolone amides were considered superior to GHQ168.
Regarding the C-6 position all other moieties (e.g., H in 9, OCH3 in 10, CF3 in 12) except of a fluorine atom decreased the activity against Trypanosoma brucei brucei. A double fluorination in C-6 and C-8 was not beneficial (IC50 = 0.06 µM for 7) and a single fluorine atom in C-8 even showed a negative effect (IC50 = 0.79 µM for 5).
The logP value is considered a surrogate parameter for lipophlicity and thus, affecting permeability and solubility processes. In particular the fluorine atom influences the lipophilicity due to versatile effects: Lipophilicity is increased by additional fluorine atoms on aromatic rings (7, 23) and reduced by fluorine atoms at an alkyl chain (49), respectively. Additionally, the 5-fluoro-substituted quinolone amides (6, 8, and 24) could prove the contrary effect of decreasing lipophilicity when the aromatic fluorine substituent is in vicinity to a carbonyl group.
For the most promising drug candidates 6, 23, and 24 the respective metabolites and the metabolic turnover were investigated by C. Erk. In comparison to GHQ168 the hydroxylation of the benzylamide was prevented by the para-fluorine atom. Hence, half-life was extended for compound 23 (t1/2 = 6.4 h) and N-desalkylation was the predominant pathway. Moreover, the respective fluorine substitution pattern of the quinolone core affected the metabolism of compound 6. The 5-fluoro-substituted quinolone amide was less prone for biotransformation (t1/2 = 7.2 h) and half-life could even be further prolonged for compound 24 (t1/2 = 7.7 h).
Due to the most appropriate safety profile of compound 6, this particular drug candidate was considered for in vivo study. Its poor solubility made a direct intraperitoneal administration unfeasible. Thus, an amorphous solid dispersion of 6 was generated using the spray-drying method according to the previous protocol. Unfortunately, the required solubility for the predicted in vivo study was not achieved.
Furthermore, the compound class of the quinolone amide was evaluated for its ability for brain penetration. The methanesulfonyl precursor 48 was synthesised and subsequently radiofluorinated in the group of Prof. Dr. Samnick (Department of Nuclear Medicine, University Hospital of Würzburg). The labelled compound [18F]49 was administered to mice, and its distribution throughout the body was analysed using positron emission tomography and autoradiography, respectively. The autoradiography of the murine brains revealed medium to high concentrations of [18F]49. Therefore, the quinolone amides are generally suitable for treating Human African Trypanosomiasis stage II.
A scaffold hopping approach was performed starting from the quinolone amides and concluding with the compound class of pyrazoloquinolin-3-ones. The intramolecular hydrogen bond between the sec. amide and the C-4 carbonyl moiety was replaced by a covalent bond. The two compound classes were comparable regarding the antitrypanosomal activity to some degree (IC50 = 7.9 µM (EK02) vs. 6.37 µM (53a)). However, a final evaluation of 59 was not possible due to poor solubility.
Biosensor techniques have become increasingly important for fragment-based drug discovery during the last years. The AAA+ ATPase p97 is an essential protein with key roles in protein homeostasis and a possible target for cancer chemotherapy. Currently available p97 inhibitors address its ATPase activity and globally impair p97-mediated processes. In contrast, inhibition of cofactor binding to the N-domain by a protein-protein-interaction inhibitor would enable the selective targeting of specific p97 functions. Here, we describe a biolayer interferometry-based fragment screen targeting the N-domain of p97 and demonstrate that a region known as SHP-motif binding site can be targeted with small molecules. Guided by molecular dynamics simulations, the binding sites of selected screening hits were postulated and experimentally validated using protein- and ligand-based NMR techniques, as well as X-ray crystallography, ultimately resulting in the first structure of a small molecule in complex with the N-domain of p97. The identified fragments provide insights into how this region could be targeted and present first chemical starting points for the development of a protein-protein interaction inhibitor preventing the binding of selected cofactors to p97.
Progressive loss of skeletal muscle mass, strength and function poses a major threat to independence and quality of life, particularly in the elderly. To date, sarcopenia therapy consists of resistance exercise training in combination with protein supplementation due to the limited efficacy of available pharmacological options in counteracting the effects of muscle wasting. Therapeutic intervention with growth factors including insulin-like growth factor I (IGF-I) or inhibitors of myostatin a potent suppressor of myogenesis hold potential to rebalance the altered activity of anabolic and catabolic cytokines. However, dosing limitations due to acute side effects and disruptions of the homeostasis have so far precluded clinical application.
Intending to provide a therapy with a superior safety and efficacy profile by directing drug release to inflamed tissue and minimizing off-target activity, we designed bioresponsive delivery systems for an anti-catabolic peptide and anabolic IGF-I responding to local flares of muscle wasting.
In Chapter I, current concepts for bioorthogonal conjugation methods are discussed and evaluated based on various drug delivery applications. With a focus on protein delivery, challenges and potential pitfalls of each chemical and enzymatic conjugation strategy are analyzed and opportunities regarding their use for coupling of biomolecules are given. Based on various studies conjugating proteins to polymers, particles and biomaterials using different site-directed approaches, the chapter summarizes available strategies and highlights certain aspects requiring particular consideration when applied to biomolecules. Finally, a decision process for selection of an optimum conjugation strategy is exemplarily presented.
Three of these bioorthogonal coupling reactions are applied in Chapter II detailing the potential of site-directed conjugation in the development of novel, homogenous drug delivery systems. The chapter describes the design of a delivery system of a myostatin inhibitor (MI) for controlled and local release counteracting myositis flares. MI release from the carrier is driven by increased matrix metalloproteinase (MMP) levels in compromised muscle tissues cleaving the interposed linker, thereby releasing the peptide inhibitor from the particulate carrier. Release experiments were performed to assess the response towards various MMP isoforms (MMP-1, -8, -9 and -13) – as upregulated during skeletal muscle myopathies – and the release pattern of the MI in case of disease progression was analyzed. By selection of the protease-sensitive linker (PSL) showing variable susceptibilities to proteases, release rates of the MI can be controlled and adapted. Immobilized MI as well as released MI as response to MMP upregulation was able to antagonize the effects of myostatin on cell signalling and myoblast differentiation.
The approach of designing bioresponsive protein delivery systems was also applied to the anabolic growth factor IGF-I, as described in Chapter III. Numerous studies of PEGylated proteins or peptides reveal, that successful therapy is challenged by safety and efficacy issues, as polymer attachment considerably alters the properties of the biologic, thereby jeopardizing clinical efficacy. To this end, a novel promising approach is presented, intending to exploit beneficial effects of PEGylation on pharmacokinetics, but addressing the pharmacodynamic challenges by releasing the protein upon entering the target tissue. This was realized by integration of a PSL between the PEG moiety and the protein. The soluble polymer conjugate was produced by site-directed, enzymatic conjugation of IGF-I to the PSL, followed by attachment of a 30 kDa-PEG using Strain-promoted azide-alkyne cycloaddition (SPAAC). This strategy illustrates the potential of bioorthogonal conjugation (as described in Chapter I) for generation of homogenous protein-polymer conjugates with reproducible outcome, but also emphasizes the altered protein properties resulting from permanent polymer conjugation. As compared to wild type IGF-I, the PEGylated protein showed considerable changes in pharmacologic effects – such as impaired insulin-like growth factor binding protein (IGFBPs) interactions, submaximal proliferative activity and altered endocytosis patterns. In contrast, IGF-I characteristics were fully restored upon local disintegration of the conjugate triggered by MMP upregulation and release of the natural growth factor.
For successful formulation development for the proteins and conjugates, the careful selection of suitable excipients is crucial for a safe and reliable therapy. Chapter IV addresses one aspect by highlighting the chemical heterogeneity of excipients and associated differences in performance. Polysorbate 80 (PS80) is a surfactant frequently used in protein formulations to prevent aggregation and surface adsorption. Despite being widely deployed as a standard excipient, heterogeneous composition and performance entails the risk of eliciting degradation and adverse effects on protein stability. Based on a comprehensive study using different batches of various suppliers, the PS80 products were characterized regarding chemical composition and physicochemical properties, facilitating the assessment of excipient performance in a formulation. Noticeable deviations were recorded between different suppliers as well as between batches of the same suppliers. Correlation of all parameters revealed, that functionality related characteristics (FRCs) could be reliably predicted based on chemical composition alone or by a combination of chemical and physicochemical properties, respectively.
In summary, this thesis describes and evaluates novel strategies for the targeted delivery and controlled release of biologics intended to counteract the imbalance of anabolic and catabolic proteins observed during aging and musculoskeletal diseases. Two delivery platforms were developed and characterized in vitro – (i) using anti-catabolic peptides immobilized on a carrier for local delivery and (ii) using soluble IGF-I polymer conjugates for systemic application. Both approaches were implemented by bioorthogonal coupling strategies, which were carefully selected in consideration of limitations, side reactions and efficiency aspects. Bioresponsive release of the active biomolecules following increased protease activity could be successfully realized. The therapeutic potential of these approaches was demonstrated using various cell-based potency assays. The systems allow targeted and controlled release of the growth factor IGF-I and anti-catabolic peptides thereby overcoming safety concerns of current growth factor therapy and thus positively impacting the benefit-risk profile of potent therapeutics. Taking potential heterogeneity and by-product concerns into account, comprehensive excipient characterization was performed and a predictive algorithm for FRCs developed, in order to facilitate formulation design and guarantee a safe and efficient therapy from start to finish.
Background: Population pharmacokinetic-pharmacodynamic (PKPD) modeling and simulations were applied to identify optimal dosage regimens for antibiotics. As the emergence of bacterial resistance is increasing and as only a few new antibiotics became available during the last decade, optimal use of established agents and preserving their effectiveness seems vital. Objectives: 1) To find the descriptor of body size and body composition which allows to achieve target concentrations and target effects in patients with cystic fibrosis (CF) most precisely. 2) To identify the mode of administration with the highest probability of successful treatment for intravenous beta-lactams. 3) To develop formulas for optimal dose selection for patients of various body size. General methods: Drug analysis in plasma and urine was performed by HPLC or LC-MS/MS in a single laboratory, at the IBMP. Drug analysis was not done by the author of this thesis. We used non-compartmental analysis and parametric population PK analysis for all studies. We used non-parametric bootstrapping to assess the uncertainty of PK parameters for our meta-analysis of the PK in CF-patients and healthy volunteers. Plasma concentration time profiles for several thousand virtual subjects were simulated by MCS which account for average PK parameters, their between subject variability (BSV), and patient specific demographic data. Convincing literature data show that the duration of non-protein bound concentration above MIC (fT>MIC) best predicts the microbiological and clinical success of beta-lactams and the area under the non-protein bound concentration curve divided by the MIC (fAUC/MIC) best predicts success for quinolones. We used PKPD targets from literature that were based on the fT>MIC or fAUC/MIC, respectively. Achieving a PKPD target was used as a surrogate measure for successful treatment. In our MCS, we calculated the fT>MIC or fAUC/MIC for all simulated concentration profiles and compared it to the value of the PKPD target. The fraction of subjects who achieved the target at the respective MIC approximates the probability of target attainment (PTA). The PTA can be interpreted as probability of successful treatment under certain assumptions. Studies in CF-patients Methods: We had data from ten studies (seven beta-lactams and three quinolones) in CF-patients which all included a healthy volunteer control group. Clinical procedures were very similar for all ten studies. Both subject groups had study conditions as similar as possible. We had data on 90 CF-patients (average +/- SD, age: 21+/-3.6 yrs) and on 111 healthy volunteers (age: 25+/-3.5 yrs). We compared the average clearance and volume of distribution between CF-patients and healthy volunteers for various body size descriptors including total body weight (WT), fat-free mass (FFM), and predicted normal weight (PNWT). We considered linear and allometric scaling of PK parameters by body size and used a meta-analysis based on population PK parameters for the comparison of CF-patients and healthy volunteers. Target concentrations can be achieved more precisely, if a size descriptor reduces the random, unexplained BSV. Therefore, we studied the reduction of unexplained BSV for each size descriptor relative to linear scaling by WT, since doses for CF-patients are commonly selected as mg/kg WT. Results: Without accounting for body size, average total clearance was 15% lower (p=0.005) and volume of distribution at steady-state was 17% lower (p=0.001) in CF-patients compared to healthy volunteers. For linear scaling by WT, average total clearance in CF-patients divided by total clearance in healthy volunteers was 1.15 (p=0.013). This ratio was 1.06 (p=0.191) for volume of distribution. A ratio of 1.0 indicates that CF-patients and healthy volunteers of the same body size have identical average clearances or volumes of distribution. For allometric scaling by FFM or PNWT, the ratio of total clearance and volume of distribution between CF-patients and healthy volunteers was within 0.80 and 1.25 for almost all drugs and the average ratio was close to 1. Allometric scaling by FFM or PNWT reduced the unexplained BSV in renal clearance by 24 to 27% (median of 10 drugs) relative to linear scaling by WT. The unexplained BSV was reduced for seven or eight of the ten drugs by more than 15% and the remaining two or three drugs had essentially unchanged (+/-15%) unexplained BSVs in renal clearance. Conclusions: The PK in CF-patients was comparable to the PK in healthy volunteers after accounting for body size and body composition by allometric scaling with FFM or PNWT. Target concentrations and target effects in CF-patients can be achieved most precisely by dose selection based on an allometric size model with FFM or PNWT. Future studies are warranted to study the clinical superiority of allometric dosing by FFM or PNWT compared to dose selection as mg/kg WT in CF-patients.
Quinolone antibiotics present an attractive oral treatment option in patients with cystic fibrosis (CF). Prior studies have reported comparable clearances and volumes of distribution in patients with CF and healthy volunteers for primarily renally cleared quinolones. We aimed to provide the first pharmacokinetic comparison for pefloxacin as a predominantly nonrenally cleared quinolone and its two metabolites between both subject groups. Eight patients with CF (fat-free mass [FFM]: 36.3 ± 6.9 kg, average ± SD) and ten healthy volunteers (FFM: 51.7 ± 9.9 kg) received 400 mg pefloxacin as a 30 min intravenous infusion and orally in a randomized, two-way crossover study. All plasma and urine data were simultaneously modelled. Bioavailability was complete in both subject groups. Pefloxacin excretion into urine was approximately 74% higher in patients with CF compared to that in healthy volunteers, whereas the urinary excretion of metabolites was only slightly higher in patients with CF. After accounting for body size and composition via allometric scaling by FFM, pharmacokinetic parameter estimates in patients with CF divided by those in healthy volunteers were 0.912 for total clearance, 0.861 for nonrenal clearance, 1.53 for renal clearance, and 0.916 for volume of distribution. Nonrenal clearance accounted for approximately 90% of total pefloxacin clearance. Overall, bioavailability and disposition were comparable between both subject groups.
Estrogens, namely 17β-estradiol (E2) and estrone (E1) are considered to play an important role in the initiation and promotion of breast cancer (summarized in Raftogianis et al., 2000), a malignancy responsible for around 500,000 deaths per year (summarized in Ghislain et al., 2016). Two major mechanisms have been postulated to explain the carcinogenic effects of estrogens: (1) the estrogen receptor-mediated stimulation of breast cell proliferation with a concomitant enhanced rate of mutations and (2) the metabolism of hydroxylated estrogens to quinone derivatives which can react with the DNA (Russo and Russo, 2006, summarized in Yager and Davidson, 2006). Nevertheless, as a detoxifying mechanism, E1, E2, and their hydroxylated and methoxylated metabolites are reversibly conjugated into sulfates and glucuronides devoid of biological activity (summarized in Guillemette et al., 2004). Yet, despite the key detoxifying function of these conjugates, the study of their circulating levels face some significant problems: (1) analysis by techniques such as radioimmunoassay lack specificity and accuracy and requires enzymatic/chemical hydrolysis before analysis, being unable to differentiate between sulfates and glucuronides (summarized in Stanczyk et al., 2007, summarized in Wang et al., 2016), (2) very little knowledge in healthy women, which has been identified as a barrier to advance in breast cancer research (summarized in Liu, 2000), and (3) far fewer studies in pre- than in postmenopausal women (summarized in Samavat and Kurzer, 2015). Therefore, to get more insights into the research of breast cancer etiology and prevention, the analysis of circulating levels of estrogens (including metabolites and conjugates) in women without breast cancer through reliable analytical techniques, is required.
Amber Light Control of Peptide Secondary Structure by a Perfluoroaromatic Azobenzene Photoswitch
(2023)
The incorporation of photoswitches into the molecular structure of peptides and proteins enables their dynamic photocontrol in complex biological systems. Here, a perfluorinated azobenzene derivative triggered by amber light was site‐specifically conjugated to cysteines in a helical peptide by perfluoroarylation chemistry. In response to the photoisomerization (trans→cis) of the conjugated azobenzene with amber light, the secondary structure of the peptide was modulated from a disorganized into an amphiphilic helical structure.
Renin–angiotensin system (RAS) plays an important role in the regulation of blood pressure and hormonal balance. Using positron emission tomography (PET) technology, it is possible to monitor the physiological and pathological distribution of angiotensin II type 1 receptors (AT\(_1\)), which reflects the functionality of RAS. A new \(^{18}\)F-labeled PET tracer derived from the clinically used AT\(_1\) antagonist valsartan showing the least possible chemical alteration from the valsartan structure has been designed and synthesized with several strategies, which can be applied for the syntheses of further derivatives. Radioligand binding study showed that the cold reference FV45 (K\(_i\) 14.6 nM) has almost equivalent binding affinity as its lead valsartan (K\(_i\) 11.8 nM) and angiotensin II (K\(_i\) 1.7 nM). Successful radiolabeling of FV45 in a one-pot radiofluorination followed by the deprotection procedure with 21.8 ± 8.5% radiochemical yield and >99% radiochemical purity (n = 5) enabled a distribution study in rats and opened a path to straightforward large-scale production. A fast and clear kidney uptake could be observed, and this renal uptake could be selectively blocked by pretreatment with AT\(_1\)-selective antagonist valsartan. Overall, as the first \(^{18}\)F-labeled PET tracer based on a derivation from clinically used drug valsartan with almost identical chemical structure, [\(^{18}\)F]FV45 will be a new tool for assessing the RAS function by visualizing AT\(_i\) receptor distributions and providing further information regarding cardiovascular system malfunction as well as possible applications in inflammation research and cancer diagnosis.
Heart failure is one of the growing causes of death especially in developed countries due to longer life expectancy. Although many pharmacological and instrumental therapeutic approaches have been introduced for prevention and treatment of heart failure, there are still limitations and challenges. Nuclear cardiology has experienced rapid growth in the last few decades, in particular the application of single photon emission computed tomography (SPECT) and positron emission tomography (PET), which allow non-invasive functional assessment of cardiac condition including neurohormonal systems involved in heart failure; its application has dramatically improved the capacity for fundamental research and clinical diagnosis. In this article, we review the current status of applying radionuclide technology in non-invasive imaging of neurohormonal system in the heart, especially focusing on the tracers that are currently available. A short discussion about disadvantages and perspectives is also included.
Background: Radiolabeled agents that are substrates for the norepinephrine transporter (NET) can be used to quantify cardiac sympathetic nervous conditions and have been demonstrated to identify high-risk congestive heart failure (HF) patients prone to arrhythmic events. We aimed to fully characterize the kinetic profile of the novel \(^{18}\)F-labeled NET probe AF78 for PET imaging of the cardiac sympathetic nervous system (SNS) among various species.
Methods: \(^{18}\)F-AF78 was compared to norepinephrine (NE) and established SNS radiotracers by employing in vitro cell assays, followed by an in vivo PET imaging approach with healthy rats, rabbits and nonhuman primates (NHPs). Additionally, chase protocols were performed in NHPs with NET inhibitor desipramine (DMI) and the NE releasing stimulator tyramine (TYR) to investigate retention kinetics in cardiac SNS.
Results: Relative to other SNS radiotracers, 18F-AF78 showed higher transport affinity via NET in a cell-based competitive uptake assay (IC\(^{50}\) 0.42 ± 0.14 µM), almost identical to that of NE (IC\(^{50}\), 0.50 ± 0.16 µM, n.s.). In rabbits and NHPs, initial cardiac uptake was significantly reduced by NET inhibition. Furthermore, cardiac tracer retention was not affected by a DMI chase protocol but was markedly reduced by intermittent TYR chase, thereby suggesting that \(^{18}\)F-AF78 is stored and can be released via the synaptic vesicular turnover process. Computational modeling hypothesized the formation of a T-shaped π-π stacking at the binding site, suggesting a rationale for the high affinity of \(^{18}\)F-AF78.
Conclusion: \(^{18}\)F-AF78 demonstrated high in vitro NET affinity and advantageous in vivo radiotracer kinetics across various species, indicating that \(^{18}\)F-AF78 is an SNS imaging agent with strong potential to guide specific interventions in cardiovascular medicine.
μ‐Opioid receptors (μ‐ORs) play a critical role in the modulation of pain and mediate the effects of the most powerful analgesic drugs. Despite extensive efforts, it remains insufficiently understood how μ‐ORs produce specific effects in living cells. We developed new fluorescent ligands based on the μ‐OR antagonist E‐p‐nitrocinnamoylamino‐dihydrocodeinone (CACO), that display high affinity, long residence time and pronounced selectivity. Using these ligands, we achieved single‐molecule imaging of μ‐ORs on the surface of living cells at physiological expression levels. Our results reveal a high heterogeneity in the diffusion of μ‐ORs, with a relevant immobile fraction. Using a pair of fluorescent ligands of different color, we provide evidence that μ‐ORs interact with each other to form short‐lived homodimers on the plasma membrane. This approach provides a new strategy to investigate μ‐OR pharmacology at single‐molecule level.
Background: Melatonin (MLT) has many health implications, therefore it is of valuable importance to develop specific analytical methods for determination of MLT in the presence of its main contaminant, N-{2-[1-({3-[2(acetylamino)ethyl]-5-methoxy-1H-indol-2-yl}methyl)-5-methoxy-1H-indol-3-yl]ethyl}acetamide (10). For development of these analytical methods, compound 10 had to be prepared in an adequate amount.
Results: Compound 10 was synthesized in six steps starting from 5-methoxyindole-2-carboxylic acid (1). Analytical performance of the proposed spectrofluorimetric methods was statistically validated with respect to linearity, accuracy, precision and specificity. The proposed methods were successfully applied for the assay of MLT in laboratory prepared mixtures containing up to 60 % of compound 10 and in commercial MLT tablets with recoveries not less than 99.00 %. No interference was observed from common pharmaceutical additives and the results were favorably compared with those obtained by a reference method.
Conclusions: This work describes simple, sensitive, and reliable second derivative spectrofluorimetric method in addition to two multivariate calibration methods, principal component regression (PCR) and partial least square (PLS), for the determination of MLT in the presence of compound 10.
Background: Melatonin (MLT) has many health implications, therefore it is of valuable importance to develop specific analytical methods for determination of MLT in the presence of its main contaminant, N-{2-[1-({3-[2-(acetylamino)ethyl]-5-methoxy-1H-indol-2-yl}methyl)-5-methoxy-1H-indol-3-yl]ethyl}acetamide (10). For development of these analytical methods, compound 10 had to be prepared in an adequate amount. Results: Compound 10 was synthesized in six steps starting from 5-methoxyindole-2-carboxylic acid (1). Analytical performance of the proposed spectrofluorimetric methods was statistically validated with respect to linearity, accuracy, precision and specificity. The proposed methods were successfully applied for the assay of MLT in laboratory prepared mixtures containing up to 60 % of compound 10 and in commercial MLT tablets with recoveries not less than 99.00 %. No interference was observed from common pharmaceutical additives and the results were favorably compared with those obtained by a reference method. Conclusions: This work describes simple, sensitive, and reliable second derivative spectrofluorimetric method in addition to two multivariate calibration methods, principal component regression (PCR) and partial least square (PLS), for the determination of MLT in the presence of compound 10.
Drug-target kinetics enable time-dependent changes in target engagement to be quantified as a function of drug concentration. When coupled to drug pharmacokinetics (PK), drug-target kinetics can thus be used to predict in vivo pharmacodynamics (PD). Previously we described a mechanistic PK/PD model that successfully predicted the antibacterial activity of an LpxC inhibitor in a model of Pseudomonas aeruginosa infection. In the present work we demonstrate that the same approach can be used to predict the in vivo activity of an enoyl-ACP reductase (FabI) inhibitor in a model of methicillin-resistant Staphylococcus aureus (MRSA) infection. This is significant because the LpxC inhibitors are cidal, whereas the FabI inhibitors are static. In addition P. aeruginosa is a Gram-negative organism whereas MRSA is Gram-positive. Thus this study supports the general applicability of our modeling approach across antibacterial space.
Formation of the Aurora-A–MYCN complex increases levels of the oncogenic transcription factor MYCN in neuroblastoma cells by abrogating its degradation through the ubiquitin proteasome system. While some small-molecule inhibitors of Aurora-A were shown to destabilize MYCN, clinical trials have not been satisfactory to date. MYCN itself is considered to be `undruggable' due to its large intrinsically disordered regions. Targeting the Aurora-A–MYCN complex rather than Aurora-A or MYCN alone will open new possibilities for drug development and screening campaigns. To overcome the challenges that a ternary system composed of Aurora-A, MYCN and a small molecule entails, a covalently cross-linked construct of the Aurora-A–MYCN complex was designed, expressed and characterized, thus enabling screening and design campaigns to identify selective binders.
Molecular Effects of Polyphenols in Experimental Type 2 Diabetes Mellitus and Metabolic Syndrome
(2019)
The growing prevalence of type 2 diabetes mellitus (T2DM) demands novel therapeutic and adjuvant strategies. Polyphenols (PPs) are plant secondary metabolites. Epidemiological studies demonstrate an inverse relationship between their increased intake and the risk of development of T2DM and cardiovascular complications. However, the PPs’ mechanism of action remains largely unknown. The present work aimed to expand knowledge regarding the effects of PPs on diabetes relevant molecular targets.
Pycnogenol® (PYC) is a standardized pine bark extract which consists of oligomeric and monomeric PPs. Its anti-diabetic effects have been demonstrated in clinical trials. As a part of a human study involving 20 healthy volunteers, the extract’s effects on dipeptidyl peptidase IV (DPP IV) were investigated. This protease terminates the insulin secretagogue action of incretins. Its inhibition is a promising strategy in T2DM treatment. This study uncovered that PYC-intake of 100 mg daily over 14 days statistically significantly reduced DPP IV serum concentrations by 8.2 % (n= 38, p= 0.032). Contrary to expectations, this decrease was not paralleled by a reduction in the serum DPP IV enzymatic activity. To the best of our knowledge, the present study was the first investigating the effects of PPs on DPP IV serum concentrations and activities in humans. The finding that PYC is capable of reducing DPP IV serum concentrations might be important with regard to diabetes, where DPP IV levels are increased.
Screenings for PPs’ in vitro effects on DPP IV activity were performed employing a purified enzyme. The effects of tested PPs (among which PYC ingredients) at a physiologically relevant concentration of 5 µM were weak (< 10 %) and too small compared to the reference compound sitagliptin, and thus not likely to be clinically relevant. This result is in discordance with some published data, but consistent with the outcome from the present human study. In addition, fluorescence interactions with the experimental setup were registered: under certain conditions urolithin B exhibited an autofluorescence which might mask eventual inhibitory activity. Quercetin quenched the fluorescence slightly which might contribute to false positive results. No statistically significant effects of selected constituents and metabolites of PYC on the total DPP IV protein expression were observed in 3T3-L1 adipocytes. Thus, the lower DPP IV in vivo concentrations after intake of PYC cannot be explained with down-regulation of the DPP IV expression in adipocytes.
Akt kinase is responsible for the transmission of insulin signals and its dysregulation is related to insulin resistance and plays an important role in development of cardiovascular complications in T2DM. Thus, the modulation of the phosphorylation status of endothelial Akt-kinase, respectively its activity, might be a promising strategy in the management of these pathologies. This work aimed to uncover the effects of PPs from different structural subclasses on Akt-phosphorylation (pAkt) in endothelial cells (Ea.hy926). Short-term effects (5 – 30 min) were investigated at a concentration of 10 µM. In a pilot study two model PPs induced a moderate, but reproducible inhibition of pAkt Ser473 of 52.37 ± 21.01 % (quercetin; p= 0.006, n= 3) and 37.79 ± 7.14 % (resveratrol; p= 0.021, n= 4) compared to the negative control. A primary screening with Western blot analysis investigated the effects of eight compounds from different subclasses on pAkt Ser473 and Thr308 to reveal whether the observed inhibition PPs a group effect or specific to certain compounds. In addition to resveratrol and quercetin, statistically significant inhibitions of pAkt Ser473 were induced by luteolin (29.96 ± 11.06 %, p< 0.01, n= 6) and apigenin (22.57 ± 10.30 %, p< 0.01, n= 6). In contrast, genistein, 3,4,5-trimethoxystilbene, taxifolin and (+)-catechin caused no inhibition. A strong positive and statistically significant correlation between the mean inhibitory effects of the tested PPs on both Akt-residues Ser473 and Thr308 (r= 0.9478, p= 0.0003) was determined. A comprehensive secondary screening via ELISA involving 44 compounds from nine structural groups quantified the effects of PPs on pAkt Ser473 to uncover potential structure-activity features. The most potent inhibitors were luteolin (44.31 ± 17.95 %), quercetin (35.71 ± 8.33 %), urolithin A (35.28 ± 11.80 %), apigenin (31.79 ± 6.16 %), fisetin (28.09 ± 9.09 %), and resveratrol (26.04 ± 5.58 %). These effects were statistically significant (p< 0.01, n= 3 to 6). Further lead structure optimization might be based on the fact that the effects of luteolin and resveratrol also differed statistically significantly from each other (p= 0.008).
To the best of our knowledge, the present study is the first to compare quantitatively the short term effects of PPs from different subclasses on pAkt in endothelial cells. Basic structure-activity relationships revealed that for flavones and flavonols the presence of a C2=C3 double bond (ring C) was essential for inhibitory activity and hydroxylation on the m- and p- positions in the ring B contributed to it. For stilbenoids, three free OH-groups appeared to be optimal. The comparison of the inhibitory potentials of ellagic acid and its microbial metabolites showed that urolithin A was statistically significantly more effective than its progenitor compound. Despite their structural similarities, the only active compound among all urolithins tested was urolithin A, hydroxylated at the C3 and C8 positions. This suggested a specific effect for urolithin A. Based on the common structural determinants and molecular geometry of the most active PPs a pharmacophore model regarding Akt-inhibition was proposed.
In summary, the effects of a wide variety of PPs from diverse structural subclasses on the in vitro phosphorylation of endothelial Akt were quantitatively analyzed for the first time, the effects of previously undescribed compounds were determined and structure activity relationships were elucidated. The inhibitory potential of individual PPs might be beneficial in cases of sustained over-activation of Akt-kinase and its substrates such as S6 kinase as reported for certain T2DM-related pathological states, such as insulin resistance, endothelial dysfunction, excessive angiogenesis, vascular calcification, and insulin triggered DNA-damage. The results of the present work suggest potential molecular mechanisms of action of PP involving Akt-inhibition and DPP IV-down-regulation and thus contribute to the understanding of anti-diabetic effects of these compounds on the molecular level.
Polyphenols exert beneficial effects in type 2 diabetes mellitus (T2DM). However, their mechanism of action remains largely unknown. Endothelial Akt-kinase plays a key role in the pathogenesis of cardiovascular complications in T2DM and therefore the modulation of its activity is of interest. This work aimed to characterize effects of structurally different polyphenols on Akt-phosphorylation (pAkt) in endothelial cells (Ea.hy926) and to describe structure-activity features. A comprehensive screening via ELISA quantified the effects of 44 polyphenols (10 µM) on pAkt Ser473. The most pronounced inhibitors were luteolin (44 ± 18%), quercetin (36 ± 8%), urolithin A (35 ± 12%), apigenin, fisetin, and resveratrol; (p < 0.01). The results were confirmed by Western blotting and complemented with corresponding experiments in HUVEC cells. A strong positive and statistically significant correlation between the mean inhibitory effects of the tested polyphenols on both Akt-residues Ser473 and Thr308 (r = 0.9478, p = 0.0003) was determined by immunoblotting. Interestingly, the structural characteristics favoring pAkt inhibition partially differed from structural features enhancing the compounds’ antioxidant activity. The present study is the first to quantitatively compare the influence of polyphenols from nine different structural subclasses on pAkt in endothelial cells. These effects might be advantageous in certain T2DM-complications involving over-activation of the Akt-pathway. The suggested molecular mode of action of polyphenols involving Akt-inhibition contributes to understanding their effects on the cellular level.
The work deals with the synthesis and characterization of cerulenin analogues as inhibitors of efflux pump mediated resistance of Candida albicans isolates and as inhibitors of the fatty acid synthesis enzyme KasA of Mycobacterium tuberculosis. Cerulenin was chosen as the lead structure, being a substrate of the efflux pumps in Candida albicans on one hand and therefore variations on the structure could lead to a blocking of the efflux pumps as in the case of tetracycline and inhibitor 13-CPTC of the TetB efflux pump. On the other hand, cerulenin is a known inhibitor of the FAS system but inhibition is unselective in type I and II FAS. Therefore, analogues could result in increased selectivity towards the type II FAS system in M. tuberculosis. The first cerulenin derivatives were prepared by coupling 2,3-dihydrofuran to the before synthesized 1-octaniodide, followed by ring opening and oxidation in one step by chromic acid and transfer of the resulting 4-keto acid to amides to give analogues 4a-d, 4e was prepared in analogy. To include the epoxide function especially with regard to the mechanism of action of cerulenin in the FAS system (considering known crystal structures of cerulenin and the KasA analogue of E. coli) tetrahydro- and dihydrocerulenin analogues were synthesized. Starting from the corresponding aldehyde, lactone 5 (tetrahydrocerulenin analogues) was obtained via two different routes A and B. Route A included the coupling of the aldehyde 1-nonanal to propiolic acid via a Grignard reaction with subsequent hydrogenation with the Lindlar catalyst under hydrogen pressure to give 5. Via Route B 1-nonanal was coupled to methyl propiolate by n-BuLi with subsequent hydrogenation under reflux with the catalytic system Lindlar cat./NH4HCO2 to yield 5. These hydrogenations were also executed in a microwave oven resulting in better yields and/or reaction times. The lactone 5 was then epoxidized, the ring opened by amidation and the remaining alcohol was oxidized via Collins oxidation to result in tetrahydrocerulenin analogues 8a-e. The same procedure was used for dihydrocerulenin analogues 10a-c except that to obtain the corresponding lactone 9a only route A was used and a further step had to be executed for ring closure. To obtain analogues with all structural features of cerulenin including two double bonds and the epoxide function, a third pathway was chosen. To obtain the future side chain, aldehyde 12 was synthesized by coupling protected 4-pentyn-1-ol to either crotyl bromide or crotyl chloride, which then was deprotected, hydrogenated with Lindlar catalyst under hydrogen pressure and oxidized via a Swern oxidation. The following synthesis sequence starting from 12 was executed similar to that of dihydrocerulenins via the corresponding lactone (51) with the major exception of the oxidation procedure in the last step via TPAP/NMO to result in (4Z,7E)-cerulenin analogues 15a-b. A fourth class of cerulenin analogues was synthesized with the aromatic analogues 17a-e. This synthesis pathway started with the formation of the benzoyl acrylamides 16a-e from benzoylacrylic acid via a mixed anhydride which was prepared with isobutylchloroformate followed by the addition of the corresponding amine. Subsequent epoxidation with H2O2 in basic EtOH gave the aromatic cerulenin analogues 17a-e. Pharmacological testings for the synthesized substances were executed on efflux pump-resistant and -sensitive Candida albicans isolates, on the fatty acid synthesis enzyme KasA of Mycobacterium tuberculosis and on other organisms such as Leishmania major, Trypanosoma brucei brucei, Staphylococcus aureus, Staphylococcus epidermidis, Escherichia coli and Pseudomonas aeruginosa within the Sonderforschungsbereich 630.
Cell culture models are helpful tools to study inflammatory diseases, like rheumatoid arthritis (RA), osteoarthritis (OA), arteriosclerosis or asthma, which are linked to increased matrix metalloproteinase (MMP) activity. Such cell culture models often focus on the secretion of cytokines and growth factors or the direct effects of disease on tissue destruction. Even though the crucial role of MMPs in inflammatory diseases is known, the results of MMP studies are contradictious and the use of MMPs as biomarkers is inconsistent. MMPs play an important role in disease pathology, as they are involved in elastin degradation in the walls of alveoli in chronic obstructive pulmonary disease (COPD), tumor angiogenesis and metastasis and in cartilage and bone degradation in arthropathies. In RA and OA MMPs are secreted by osteocytes, synoviocytes, and by infiltrating immune cells in response to the increased concentration of inflammatory mediators, like growth factors and cytokines. MMPs are zinc and calcium-dependent proteinases and play an important role in physiological and pathological extracellular matrix (ECM) turn over. Their substrate specificity gives them the ability to degrade all major ECM components, like aggrecan, elastin, gelatin, fibronectin and all types of collagen even the triple helix of collagen monomers. The ECM consists of two large three-dimensional cross-linked macromolecule classes: one are fibrous proteins, like collagen and elastin fibers that are responsible for ECM’s structure, tensile strength, resiliency, reversible extensibility, and deformability and the second class is comprised of proteoglycans composed of glycosaminoglycan (GAG) chains covalently attached to protein cores that are multifunctionally involved in signaling pathways and cell interactions. ECM is present within all tissues and organs and changes in ECM structure contribute to pathogenesis, e.g. wounded and fibrotic tissue, COPD or tumours.
This thesis primarily focuses on the development of a diagnostic peptide system, that enables to gain information on MMP activity from ECM by deploying the isobaric mass encoding strategy. The core element of the developed system is an isotopically labelled peptide sequence (mass tag), that is released in response to elevated levels of MMPs and allows multiplexed detection in tandem mass spectrometry (LC-MS/MS). The mass reporters possess a modular structure with different functionalities. C-terminal either a transglutaminase (TG) recognition sequence or a high molecular weight polyethylene glycol (PEG) moiety was attached to immobilize the mass reporters covalently or physically at the injection site. The following matrix metalloproteinase substrate sequence (MSS) is incorporated in two different versions with different sensitivity to MMPs. The MSS were applied in pairs for relative quantification consisting of the cleavable version synthesized with natural L-amino acids and the non-cleavable D-amino acid variant. The mass tag was synthesized with isotopically labelled amino acids and is separated from the MSS by a UV light-sensitive molecule. N-terminal the mass tag is followed by a tobacco etch virus protease (TEV) sensitive sequence, that is responsible to separate the mass tag from the affinity tag, which was either the Strep-tag II sequence or biotin and were added for purification purposes.
Chapter 1 presents a step-by-step protocol on how to design a mass tag family allowing for multiplexed analysis by LC-MS/MS. The multiplexing is achieved by developing an isobar mass tag family with four family members, which are chromatographically indistinguishable, but due to the mass encoding principles they fragment in distinct y-type ions with a mass difference of 1 or 2 Da each in MS2. Furthermore, it is explained how to covalently attach the mass reporter peptides onto ECM by the activated calcium-catalyzed blood coagulation transglutaminase factor XIII (FXIIIa). The lysine of mass reporter’s TG sequence (D-domain of insulin-like growth factor-I (IGF-I)) and a glutamine in fibronectin are covalently crosslinked by FXIIIa and build an isopeptide bond. Elevated levels of MMP release the mass reporters from ECM by recognizing the inter-positioned MSS.
The designed mass reporters were able to monitor enzyme activity in an in vitro setting with cell-derived ECM, which was shown in Chapter 2. The modular structured mass reporters were investigated in a proof of concept study. First, the different modules were characterized in terms of their MMP responsiveness and their sensitivity to TEV protease and UV light. Then the FXIIIa-mediated coupling reaction was detailed and the successful coupling on ECM was visualized by an immunosorbent assay or confocal laser scanning microscopy. Finally, the immobilized mass reporters on ECM were incubated with MMP-9 to investigate their multiplexing ability of MMP activity. The cleaved mass reporter fragments were purified in three steps and mass tags were analyzed as mix of all four in LC-MS/MS.
Chapter 3 describes the change from an immobilizing system as seen in chapter 1 and 2 to a soluble enzyme activity monitoring system that was applied in an osteoarthritic mouse model. Instead of the immobilizing TG sequence the C-terminal MMS was extended with two amino acids where one holds an azide moiety to perform a strain-promoted azide-alkyne cycloaddition to a high molecular weight dibenzocyclooctyne-polyethylene glycol (DBCO-PEG), which was chosen to retain the mass reporters at the injection site. Furthermore, the N-terminal affinity tag was extended with a 2.5 kDa PEG chain to increase the half-life of the mass reporter peptides after MMP release. The systems biocompatibility was proved but its enzyme monitoring ability in an in vivo setting could not be analyzed as samples degraded during shipping resulting from the Chinese customs blocking transport to Germany.
In summary the diagnostic peptide system was developed in two variants. The immobilized version one from chapter 1 and 2 was designed to be covalently attached to ECM by the transglutaminase-mediated cross-linking reaction. In an in vitro setting the functionality of the mass reporter system for the detection of MMP activity was successfully verified. The second variant comprises of a soluble mass reporter system that was tested in an OA mouse model and showed biocompatibility. With these two designed systems this thesis provides a flexible platform based on multiplexed analysis with mass-encoded peptides to characterize cell culture models regarding their MMP activity, to deploy cell-derived ECM as endogenous depot scaffold and to develop a mass tag family that enables simultaneous detection of at least four mass tags.
While life expectancy increases worldwide, treatment of neurodegenerative diseases such as AD becomes a major task for industrial and academic research. Currently, a treatment of AD is only symptomatical and limited to an early stage of the disease by inhibiting AChE. A cure for AD might even seem far away. A rethinking of other possible targets is therefore necessary. Addressing targets that can influence AD even at later stages might be the key. Even if it is not possible to find a cure for AD, it is of great value for AD patients by providing an effective medication. The suffering of patients and their families might be relieved and remaining years may be spent with less symptoms and restrictions.
It was shown that a combination of hCB2R agonist and BChE inhibitor might exactly be a promising approach to combat AD. In the previous chapters, a first investigation of dual-acting compounds that address both hCB2R and BChE was illustrated (figure 6.1).
A set of over 30 compounds was obtained by applying SARs from BChE inhibitors to a hCB2R
selective agonist developed by AstraZeneca. In a first in vitro evaluation compounds showed
selectivity over hCB1R and AChE. Further investigations could also prove agonism and showed
that unwanted off-target affinity to hMOP receptor could be designed out. The development of
a homology model for hCB2R (based on a novel hCB1R crystal) could further elucidate the
mode of action of the ligand binding. Lastly, first in vivo studies showed a beneficial effect of
selected dual-acting compounds regarding memory and cognition.
Since these first in vivo studies mainly aim for an inhibition of the BChE, it should be the aim
of upcoming projects to proof the relevance of hCB2R agonism in vivo as well. In addition,
pharmacokinetic as well as solubility studies may help to complete the overall picture.
Currently, hybrid-based dual-acting hCB2R agonists and selective BChE inhibitors are under
investigation in our lab. First in vitro evaluations showed improved BChE inhibition and
selectivity over AChE compared to tacrine.78 Future in vitro and in vivo studies will clarify their
usage as drug molecules with regard to hepatotoxicity and blood-brain barrier penetration.
Since the role of hCB2R is not yet completely elucidated, the use of photochromic toolcompounds
becomes an area of interest. These tool-compounds (and their biological effect) can
be triggered upon irradiation with light and thus help to investigate time scales and ligand
binding.
A set of 5-azobenzene benzimidazoles was developed and synthesized. In radioligand binding
studies, affinity towards hCB2R could be increased upon irradiation with UV-light (figure 6.2).
This makes the investigated compounds the first GPCR ligands that can be activated upon
irradiation (not vice versa).
The aim of upcoming research will be the triggering of a certain intrinsic activity by an
“efficacy-switch”. For this purpose, several attempts are currently under investigation: an
introduction of an azobenzene moiety at the 2-position of the benzimidazole core already led to
a slight difference in efficacy upon irradiation with UV light. Another approach going on in our
lab is the development of hCB1R switches based on the selective hCB1R inverse agonist
rimonabant. First in vitro results are not yet available (figure 6.3).
Opioid receptors (ORs) are classified among the oldest and best investigated drug targets due to their fundamental role in the treatment of pain and related disorders. ORs are divided in three conventional subtypes (μ, κ, δ) and the non‐classical nocicepetin receptor. All ORs are family A G protein‐coupled receptors (GPCRs), and are located on the cell surface. Modern biophysical methods use light to investigate physiological processes at organismal, cellular and subcellular level. Many of these methods rely on fluorescent ligands, thus highlighting their importance. This review addresses the advancements in the development of opioid fluorescent ligands and their use in biological, pharmacological and imaging applications.
Over the past decades, awareness has increased of multiple health-promoting effects of diets rich in anthocyanins and proanthocyanidins and, specifically, of these compounds’ potential for conferring neuroprotection. The present study compiles evidence obtained in vitro that expands our understanding of anthocyanin and proanthocyanidin functionalities at multiple levels. Firstly, anthocyanin and anthocyanidin bioavailability was addressed using a combination of ATPase assays, dye extrusion assays and vesicular transport assays. This approach highlights the contribution made by efflux transporters MDR1 and BCRP to the absorption of berry polyphenols and to their distribution to target tissues including the central nervous system. All test compounds interacted with the BCRP transporter in vitro, seven emerged as potential BCRP substrates and 12 as potential inhibitors of BCRP. Two anthocyanidins, malvidin and petunidin, exhibited bimodal activities, serving as BCRP substrates at low micromolar concentrations and, at higher concentrations, as BCRP inhibitors. Effects on MDR1, in contrast, were weak, as only aglycones exerted mild inhibitory activity in the high micromolar range. Distinct affinities of several anthocyanins and the respective aglycones for BCRP suggest that they may be actively transported out of endothelia. Agents that interfere with BCRP activity are therefore likely to facilitate crossing of the intestinal and blood-brain barriers and to augment anthocyanin bioavailability. Secondly, novel modes of action were sought to rationalize berry polyphenols’ direct modulation of neuronal transmission as opposed to their non-specific antioxidant activities. The candidate effectors include cellular monoamine oxidases (MAO) A and B, hypoxia inducible factor (HIF), the proteasome, and phospholipase A2 (PLA2). Elevated MAO activity has long been implicated in the etiology of depression, anxiety and neurodegenerative illness. MAO inhibiting compounds may thus hold promise in the prevention of behavioral symptoms and cognitive decline. For both MAO isoforms, inhibitory effects of anthocyanins and anthocyanidins are illustrated by IC50 values in the low micromolar range whereas proanthocyanidins and phenolic metabolites were less effective inhibitors. Kinetic analyses, performed with cyanidin and cyanidin-3-glucoside, indicated a competitive interaction of cyanidin in terms of MAO A, plus a mixed competitive and non-competitive mode of interaction of cyanidin in terms of MAO B as well as of cyanidin-3-glucoside with respect to both enzyme isoforms. Thus MAO inhibition by anthocyanins and their aglycones in vitro lends support to central nervous functionalities of diets rich in berry polyphenols and opens new opportunities in the prevention of neuronal pathologies. Effects on HIF expression were examined to assess candidate compounds’ role in enhancing cellular resistance to oxidative stress. By inducing a dose-dependent increase in HIF expression, delphinidin may initiate a variety of cellular survival processes that are inhibited by free iron. This finding argues in favor of iron-chelating properties as a further means of mediating neuroprotection. Other inducers of HIF expression in neuroblastoma cells included gallic acid, cyanidin and bilberry extract, all of which may modulate HIF-dependent transcription of downstream genes.
Marine natural products have achieved great success as an important source of new lead compounds for drug discovery. The Red Sea provides enormous diversity on the biological scale in all domains of life including micro- and macro-organisms. In this review, which covers the literature to the end of 2019, we summarize the diversity of bioactive secondary metabolites derived from Red Sea micro- and macro-organisms, and discuss their biological potential whenever applicable. Moreover, the diversity of the Red Sea organisms is highlighted as well as their genomic potential. This review is a comprehensive study that compares the natural products recovered from the Red Sea in terms of ecological role and pharmacological activities.
The aim of this study was to determine the potential of some Ghanaian underutilized legumes in helping to reduce the problems of poverty, hunger and malnutrition among the vulnerable group of the Ghanaian population. The study looked into the functional properties, fat and fatty acid distribution, raffinose, sucrose, glucose, fructose, calcium, magnesium, sodium, potassium, iron, copper, manganese, zinc, cyanide and isoflavone contents of raw and processed seed flours of Cajanus cajan, Canavalia ensiformis, Canavalia gladiata, Mucuna pruriens, Parkia biglobosa, Phaseolus lunatus and Vigna subterranea. The parameters mentioned above were also determined for raw fruit flour of Dialium guineense. In addition to these, the study also looked into the crude protein and starch contents of the raw and processed seed flours of Canavalia gladiata, Parkia biglobosa and Vigna subterranea. The obtained results suggest that the legumes may have untapped potential, which may be exploited to help assist in reducing hunger, malnutrition and poverty in Ghana. Results of the functional properties reveal that the legumes may serve useful roles in various food products. For instance, velvet tamarind (Dialium guineense) flour may be useful in infant food formulations because of it high solubility and low bulk density. African Locust bean (Parkia biglobosa) flour had the highest fat content among the studied flours, recording a fat content of approximately 14%. It may therefore be economical to express the oil and use the oil as an edible oil or for industrial applications for products such as soaps, shampoos, paints, etc. This means the properties of the oil of African Locust bean flour need to be studied to know the uses of the oil. Unsaturated fatty acids in the cis configuration formed more than 50% of the fatty acids in all the legumes. This observation coupled with the low sodium content of all the legumes suggest that these legumes may be suitable for consumption to prevent cardiovascular diseases. The daily nutrient needs of individuals can be met by the consumption of the appropriate amounts of these legumes. For example, 375.25 g of processed velvet beans (Mucuna pruriens) flour may be able to meet the adequate intake (AI) of 350 mg/day magnesium for adult males.
Hysterectomy has a variety of medical indications and improves pre-operative symptoms but might compromise the quality of life during recovery due to symptoms such as fatigue, headache, nausea, depression, or pain. The aim of the present study was to determine the effect of a standardized extract from French oak wood (Quercus robur) containing at least 40% polyphenols of the ellagitannins class, Robuvit\(^®\), on convalescence and oxidative stress of women after hysterectomy. Recovery status was monitored with the SF-36 questionnaire. The supplementation with Robuvit\(^®\) (300 mg/day) during 4 weeks significantly improved general and mental health, while under placebo some items significantly deteriorated. Oxidative stress and enhancement of MMP–9 activity was significantly reduced by Robuvit\(^®\) versus placebo. After 8 weeks of intervention, the patients’ condition improved independently of the intervention. Our results suggest that the use of Robuvit\(^®\) as a natural supplement relieves post-operative symptoms of patients after hysterectomy and reduces oxidative stress. The study was registered with ID ISRCTN 11457040 (13/09/2019).
Background
Cutaneous leishmaniasis (CL) is a neglected tropical disease caused by protozoan parasites of the genus Leishmania. CL causes enormous suffering in many countries worldwide. There is no licensed vaccine against CL, and the chemotherapy options show limited efficacy and high toxicity. Localization of the parasites inside host cells is a barrier to most standard chemo- and immune-based interventions. Hence, novel drugs, which are safe, effective and readily accessible to third-world countries and/or drug delivery technologies for effective CL treatments are desperately needed.
Methodology/Principal
Findings Here we evaluated the antileishmanial properties and delivery potential of polyhexamethylene biguanide (PHMB; polyhexanide), a widely used antimicrobial and wound antiseptic, in the Leishmania model. PHMB showed an inherent antileishmanial activity at submicromolar concentrations. Our data revealed that PHMB kills Leishmania major (L. major) via a dual mechanism involving disruption of membrane integrity and selective chromosome condensation and damage. PHMB's DNA binding and host cell entry properties were further exploited to improve the delivery and immunomodulatory activities of unmethylated cytosine-phosphate-guanine oligodeoxynucleotides (CpG ODN). PHMB spontaneously bound CpG ODN, forming stable nanopolyplexes that enhanced uptake of CpG ODN, potentiated antimicrobial killing and reduced host cell toxicity of PHMB.
Conclusions
Given its low cost and long history of safe topical use, PHMB holds promise as a drug for CL therapy and delivery vehicle for nucleic acid immunomodulators.
During the last decades the number of biologics increased dramatically and several biopharmaceutical drugs such as peptides, therapeutic proteins, hormones, enzymes, vaccines, monoclonal antibodies and antibody-drug conjugates conquered the market. Moreover, administration and local delivery of growth factors has gained substantial importance in the field of tissue engineering. Despite progress that has been made over the last decades formulation and delivery of therapeutic proteins is still a challenge. Thus, we worked on formulation and delivery strategies of therapeutic proteins to improve their biological performance.
Phase I of this work deals with protein stability with the main focus on a liquid protein formulation of the dimeric fusion protein PR-15, a lesion specific platelet adhesion inhibitor. In order to develop an adequate formulation ensuring the stability and bioactivity of PR-15 during storage at 4 °C, a pH screening, a forced degradation and a Design of Experiments (DoE) was performed. First the stability and bioactivity of PR-15 in 50 mM histidine buffer in relation to pH was evaluated in a short-term storage stability study at 25 °C and 40 °C for 4 and 8 weeks using different analytical methods. Additionally, potential degradation pathways of PR-15 were investigated under stressed conditions such as heat treatment, acidic or basic pH, freeze-thaw cycles, light exposure, induced oxidation and induced deamidation during the forced degradation study. Moreover, we were able to identify the main degradation product of PR-15 by performing LC/ESI-MS analysis. Further optimization of the injectable PR 15 formulation concerning pH, the choice of buffer and the addition of excipients was studied in the following DoE and finally an optimal PR-15 formulation was found.
The growth factors BMP-2, IGF-I and TGF-β3 were selected for the differentiation of stem cells for tissue engineering of cartilage and bone in order to prepare multifunctionalized osteochondral implants for the regeneration of cartilage defects.
Silk fibroin (SF) was chosen as biomaterial because of its biocompatibility, mechanical properties and its opportunity for biofunctionalization. Ideal geometry of SF scaffolds with optimal porosity was found in order to generate both tissues on one scaffold.
The growth factors BMP-2 and IGF-I were modified to allow spatially restricted covalent immobilization on the generated porous SF scaffolds. In order to perform site-directed covalent coupling by the usage of click chemistry on two opposite sides of the scaffold, we genetically engineered BMP-2 (not shown in this work; performed by Barbara Tabisz) and IGF-I for the introduction of alkyne or azide bearing artificial amino acids. TGF β3 was immobilized to beads through common EDC/NHS chemistry requiring no modification and distributed in the pores of the entire scaffold.
For this reason protein modification, protein engineering, protein immobilization and bioconjugation are investigated in phase II. Beside the synthesis the focus was on the characterization of such modified proteins and its conjugates. The field of protein engineering offers a wide range of possibilities to modify existing proteins or to design new proteins with prolonged serum half-life, increased conformational stability or improved release rates according to their clinical use.
Site-directed click chemistry and non-site-directed EDC/NHS chemistry were used for bioconjugation and protein immobilization with the aim to underline the preferences of site-directed coupling.
We chose three strategies for the incorporation of alkyne or azide functionality for the performance of click reaction into the protein of interest: diazonium coupling reaction, PEGylation and genetic engineering. Azido groups were successfully introduced into SF by implementation of diazonium coupling and alkyne, amino or acid functionality was incorporated into FGF-2 as model protein by means of thiol PEGylation. The proper folding of FGF-2 after PEGylation was assessed by fluorescence spectroscopy, WST-1 proliferation assay ensured moderate bioactivity and the purity of PEGylated FGF-2 samples was monitored with RP-HPLC. Moreover, the modification of native FGF-2 with 10 kDa PEG chains resulted in enhanced thermal stability.
Additionally, we genetically engineered one IGF-I mutant by incorporating the unnatural amino acid propargyl-L-lysine (plk) at position 65 into the IGF-I amino acid sequence and were able to express hardly verifiable amounts of plk-IGF-I. Consequently, plk-IGF-I expression has to be further optimized in future studies in order to generate plk-IGF-I with higher yields.
Bioconjugation of PEGylated FGF-2 with functionalized silk was performed in solution and was successful for click as well as EDC/NHS chemistry. However, substantial amounts of unreacted PEG-FGF-2 were adsorbed to SF and could not be removed from the reaction mixture making it impossible to expose the advantages of click chemistry in relation to EDC/NHS chemistry. The immobilization of PEG-FGF-2 to microspheres was a trial to increase product yield and to remove unreacted PEG-FGF-2 from reaction mixture. Bound PEG-FGF-2 was visualized by fluorescence imaging or flow cytometry and bioactivity was assessed by analysis of the proliferation of NIH 3T3 cells. However, immobilization on beads raised the same issue as in solution: adsorption caused by electrostatic interactions of positively charged FGF-2 and negatively charged SF or beads. Finally, we were not able to prove superiority of site-directed click chemistry over non-site-directed EDC/NHS.
The skills and knowledge in protein immobilization as well as protein characterization acquired during phase II helped us in phase III to engineer cartilage tissue in biofunctionalized SF scaffolds.
The approach of covalent immobilization of the required growth factors is relevant because of their short in vivo half-lives and aimed at controlling their bioavailability. So TGF-β3 was covalently coupled by means of EDC/NHS chemistry to biocompatible and biostable PMMA beads. Herein, we directly compared bioactivity of covalently coupled and adsorbed TGF-β3. During the so-called luciferase assay bioactivity of covalent coupled as well as adsorbed TGF-β3 on PMMA beads was ensured. In order to investigate the real influence of EDC/NHS chemistry on TGF-β3’s bioactivity, the amount of immobilized TGF-β3 on PMMA beads was determined. Therefore, an ELISA method was established. The assessment of total amount of TGF-β3 immobilized on the PMMA beads allowed as to calculate coupling efficiency. A significantly higher coupling efficiency was determined for the coupling of TGF-β3 via EDC/NHS chemistry compared to the reaction without coupling reagents indicating a small amount of adsorbed TGF-β3. These results provide opportunity to determine the consequence of coupling by means of EDC/NHS chemistry for TGF β3 bioactivity. At first sight, no statistically significant difference between covalent immobilized and adsorbed TGF-β3 was observed regarding relative luciferase activities. But during comparison of total and active amount of TGF-β3 on PMMA beads detected by ELISA or luciferase assay, respectively, a decrease of TGF-β3’s bioactivity became apparent. Nevertheless, immobilized TGF β3 was further investigated in combination with SF scaffolds in order to drive BMSCs to the chondrogenic lineage. According to the results obtained through histological and immunohistochemical studies, biochemical assays as well as qRT-PCR of gene expression from BMSCs after 21 days in culture immobilized TGF-β3 was able to engineer cartilage tissue. These findings support the thesis that local presentation of TGF β3 is superior towards exogenous TGF β3 for the development of hyaline cartilage. Furthermore, we conclude that covalent immobilized TGF β3 is not only superior towards exogenously supplemented TGF-β3 but also superior towards adsorbed TGF-β3 for articular hyaline cartilage tissue engineering. Diffusion processes were inhibited through covalent immobilization of TGF-β3 to PMMA beads and thereby a stable and consistent TGF-β3 concentration was maintained in the target area.
With the knowledge acquired during phase II and III as well as during the studies of Barbara Tabisz concerning the expression and purification of plk-BMP-2 we made considerable progress towards the formation of multifunctionalized osteochondral implants for the regeneration of cartilage defects. However, further studies are required for the translation of these insights into the development of multifunctionalized osteochondral SF scaffolds.
The present thesis concerns the molecular imaging of opioid receptors and human butyrylcholinesterase with the aid of tailored probes, which are suitable for the respective applied imaging techniques. The first part focusses on imaging of opioid receptors with selective probes using total internal reflection- and single molecule fluorescence microscopy. Design and synthesis of the ligands are presented and their pharmacological characterization and application in microscopy experiments are shown. The second part of this thesis focused on the development of 18F-labeled, selective radiotracers for imaging of butyrylcholinesterase via positron emission tomography. The design and synthesis of each a reversible and pseudoirreversible 18F-labeled tracer are presented. After evaluation of the binding properties of each tracer, their initial application in ex vivo autoradiography- and preliminary in vivo microPET studies is described and analyzed.
Purpose
A neuropathological hallmark of Alzheimer's disease (AD) is the presence of amyloid-β (Aβ) plaques in the brain, which are observed in a significant number of cognitively normal, older adults as well. In AD, butyrylcholinesterase (BChE) becomes associated with A\(_{β}\) aggregates, making it a promising target for imaging probes to support diagnosis of AD. In this study, we present the synthesis, radiochemistry, in vitro and preliminary ex and in vivo investigations of a selective, reversible BChE inhibitor as PET-tracer for evaluation as an AD diagnostic.
Procedures
Radiolabeling of the inhibitor was achieved by fluorination of a respective tosylated precursor using K[\(^{18}\)F]. IC\(_{50}\) values of the fluorinated compound were obtained in a colorimetric assay using recombinant, human (h) BChE. Dissociation constants were determined by measuring hBChE activity in the presence of different concentrations of inhibitor.
Results
Radiofluorination of the tosylate precursor gave the desired radiotracer in an average radiochemical yield of 20 ± 3 %. Identity and > 95.5 % radiochemical purity were confirmed by HPLC and TLC autoradiography. The inhibitory potency determined in Ellman's assay gave an IC\(_{50}\) value of 118.3 ± 19.6 nM. Dissociation constants measured in kinetic experiments revealed lower affinity of the inhibitor for binding to the acylated enzyme (K2 = 68.0 nM) in comparison to the free enzyme (K\(_{1}\) = 32.9 nM).
Conclusions
The reversibly acting, selective radiotracer is synthetically easily accessible and retains promising activity and binding potential on hBChE. Radiosynthesis with \(^{18}\)F labeling of tosylates was feasible in a reasonable time frame and good radiochemical yield.
The enzyme butyrylcholinesterase (BChE) represents a promising target for imaging probes to potentially enable early diagnosis of neurodegenerative diseases like Alzheimer's disease (AD) and to monitor disease progression in some forms of cancer. In this study, we present the design, facile synthesis, in vitro and preliminary ex vivo and in vivo evaluation of a morpholine‐based, selective inhibitor of human BChE as a positron emission tomography (PET) tracer with a pseudo‐irreversible binding mode. We demonstrate a novel protecting group strategy for 18F radiolabeling of carbamate precursors and show that the inhibitory potency as well as kinetic properties of our unlabeled reference compound were retained in comparison to the parent compound. In particular, the prolonged duration of enzyme inhibition of such a morpholinocarbamate motivated us to design a PET tracer, possibly enabling a precise mapping of BChE distribution.
Oral antineoplastic drugs are an important component in the treatment of solid tumour diseases, haematological and immunological malignancies. Oral drug administration is associated with positive features (e.g., non-invasive drug administration, outpatient care with a high level of independence for the patient and reduced costs for the health care system). The systemic exposure after oral intake however is prone to high IIV as it strongly depends on gastrointestinal absorption processes, which are per se characterized by high inter-and intraindividual variability. Disease and patient-specific characteristics (e.g., disease state, concomitant diseases, concomitant medication, patient demographics) may additionally contribute to variability in plasma concentrations between individual patients. In addition, many oral antineoplastic drugs show complex PK, which has not yet been fully investigated and elucidated for all substances. All this may increase the risk of suboptimal plasma exposure (either subtherapeutic or toxic), which may ultimately jeopardise the success of therapy, either through a loss of efficacy or through increased, intolerable adverse drug reactions. TDM can be used to detect suboptimal plasma levels and prevent permanent under- or overexposure. It is essential in the treatment of ACC with mitotane, a substance with unfavourable PK and high IIV. In the current work a HPLC-UV method for the TDM of mitotane using VAMS was developed. A low sample volume (20 µl) of capillary blood was used in the developed method, which facilitates dense sampling e.g., at treatment initiation. However, no reference ranges for measurements from capillary blood are established so far and a simple conversion from capillary concentrations to plasma concentrations was not possible. To date the therapeutic range is established only for plasma concentrations and observed capillary concentrations could not be reliable interpretated.The multi-kinase inhibitor cabozantinib is also used for the treatment of ACC. However, not all PK properties, like the characteristic second peak in the cabozantinib concentration-time profile have been fully understood so far. To gain a mechanistic understanding of the compound, a PBPK model was developed and various theories for modelling the second peak were explored, revealing that EHC of the compound is most plausible. Cabozantinib is mainly metabolized via CYP3A4 and susceptible to DDI with e.g., CYP3A4 inducers. The DDI between cabozantinib and rifampin was investigated with the developed PBPK model and revealed a reduced cabozantinib exposure (AUC) by 77%. Hence, the combination of cabozantinib with strong CYP inducers should be avoided. If this is not possible, co administration should be monitored using TDM. The model was also used to simulate cabozantinib plasma concentrations at different stages of liver injury. This showed a 64% and 50% increase in total exposure for mild and moderate liver injury, respectively.Ruxolitinib is used, among others, for patients with acute and chronic GvHD. These patients often also receive posaconazole for invasive fungal prophylaxis leading to CYP3A4 mediated DDI between both substances. Different dosing recommendations from the FDA and EMA on the use of ruxolitinib in combination with posaconazole complicate clinical use. To simulate the effect of this relevant DDI, two separate PBPK models for ruxolitinib and posaconazole were developed and combined. Predicted ruxolitinib exposure was compared to observed plasma concentrations obtained in GvHD patients. The model simulations showed that the observed ruxolitinib concentrations in these patients were generally higher than the simulated concentrations in healthy individuals, with standard dosing present in both scenarios. According to the developed model, EMA recommended RUX dose reduction seems to be plausible as due to the complexity of the disease and intake of extensive co-medication, RUX plasma concentration can be higher than expected.
Ruxolitinib (RUX) is approved for the treatment of steroid-refractory acute and chronic graft versus host disease (GvHD). It is predominantly metabolized via cytochrome P450 (CYP) 3A4. As patients with GvHD have an increased risk of invasive fungal infections, RUX is frequently combined with posaconazole (POS), a strong CYP3A4 inhibitor. Knowledge of RUX exposure under concomitant POS treatment is scarce and recommendations on dose modifications are inconsistent. A physiologically based pharmacokinetic (PBPK) model was developed to investigate the drug–drug interaction (DDI) between POS and RUX. The predicted RUX exposure was compared to observed concentrations in patients with GvHD in the clinical routine. PBPK models for RUX and POS were independently set up using PK-Sim\(^®\) Version 11. Plasma concentration-time profiles were described successfully and all predicted area under the curve (AUC) values were within 2-fold of the observed values. The increase in RUX exposure was predicted with a DDI ratio of 1.21 (C\(_{max}\)) and 1.59 (AUC). Standard dosing in patients with GvHD led to higher RUX exposure than expected, suggesting further dose reduction if combined with POS. The developed model can serve as a starting point for further simulations of the implemented DDI and can be extended to further perpetrators of CYP-mediated PK-DDIs or disease-specific physiological changes.
Cabozantinib (CAB) is a receptor tyrosine kinase inhibitor approved for the treatment of several cancer types. Enterohepatic recirculation (EHC) of the substance is assumed but has not been further investigated yet. CAB is mainly metabolized via CYP3A4 and is susceptible for drug–drug interactions (DDI). The goal of this work was to develop a physiologically based pharmacokinetic (PBPK) model to investigate EHC, to simulate DDI with Rifampin and to simulate subjects with hepatic impairment. The model was established using PK-Sim® and six human clinical studies. The inclusion of an EHC process into the model led to the most accurate description of the pharmacokinetic behavior of CAB. The model was able to predict plasma concentrations with low bias and good precision. Ninety-seven percent of all simulated plasma concentrations fell within 2-fold of the corresponding concentration observed. Maximum plasma concentration (C\(_{max}\)) and area under the curve (AUC) were predicted correctly (predicted/observed ratio of 0.9–1.2 for AUC and 0.8–1.1 for C\(_{max}\)). DDI with Rifampin led to a reduction in predicted AUC by 77%. Several physiological parameters were adapted to simulate hepatic impairment correctly. This is the first CAB model used to simulate DDI with Rifampin and hepatic impairment including EHC, which can serve as a starting point for further simulations with regard to special populations.
As part of the parasympathetic nervous system, muscarinic receptors are involved in the regulation of numerous functions in the human body. However, targeting a specific subtype of muscarinic receptors is challenging due to the high degree of similarity within the binding site of the endogenous neurotransmitter acetylcholine. Therefore, this study focused on the investigation of dualsteric ligands. Such hybrid ligands target the orthosteric acetylcholine binding site and, simultaneously, a distinct allosteric binding site. Since allosteric binding regions show significant structural differences throughout muscarinic receptor subtypes, it was aimed to produce selective ligands by means of combination of two pharmacophores in one molecule. Herein, the thienopyridine derivatives LY2033298 and LY2119620 were chosen as allosteric moieties. Based on literature studies, the investigated allosteric modulators were analyzed in terms of adequate attachment points for the combination with an orthosteric agonist. As orthosteric units, muscarinic superagonist iperoxo, xanomeline, and TMA were applied in this work. Since the distance between orthosteric and allosteric moieties plays a crucial role for dualsteric ligand binding, the linker chain length was also varied. Pharmacological investigations of the synthesized hybrid ligands were perfomed via FRET- and BRET-assay measurements.
Bioassay-guided fractionation of a chloroform extract of Valeriana wallichii (V. wallichii) rhizomes lead to the isolation and identification of caffeic acid bornyl ester (1) as the active component against Leishmania major (L. major) promastigotes (IC50 = 48.8 µM). To investigate the structure-activity relationship (SAR), a library of compounds based on 1 was synthesized and tested in vitro against L. major and L. donovani promastigotes, and L. major amastigotes. Cytotoxicity was determined using a murine J774.1 cell line and bone marrow derived macrophages (BMDM). Some compounds showed antileishmanial activity in the concentration range of pentamidine and miltefosine which are the standard drugs in use. In the L. major amastigote assay compounds 15, 19 and 20 showed good activity with relatively low cytotoxicity against BMDM, resulting in acceptable selectivity indices. Molecules with adjacent phenolic hydroxyl groups exhibited elevated cytotoxicity against murine cell lines J774.1 and BMDM. The Michael system seems not to be essential for antileishmanial activity. Based on the results compound 27 can be regarded as new lead structure for further structure optimization
The chloroform extract of Valeriana wallichii (V. wallichii) rhizomes was investigated to elucidate the structures responsible for reported antileishmanial activity. Besides bornyl caffeate (1, already been reported by us previously), bioassay-guided fractionation resulted in two additional cinnamic acid derivatives 2–3 with moderate leishmanicidal activity. The structure of a novel nepetolactone derivative 4 having a cinnamic acid moiety was elucidated by means of spectral analysis. To the best of our knowledge villoside aglycone (5) was isolated from this plant for the first time. The bioassay-guided fractionation yielded two new (compounds 6–7) and two known valtrates (compounds 8–9) with leishmanicidal potential against Leishmania major (L. major) promastigotes. In addition, β-bisabolol (10), α-kessyl alcohol (11), valeranone (12), bornyl isovalerate (13) and linarin-2-O-methylbutyrate (14) were identified. This is the first report on the isolation of 4'-demethylpodophyllotoxin (15), podophyllotoxin (16) and pinoresinol (17) in V. wallichii. In total thirteen known and four new compounds were identified from the extract and their cytotoxic and antileishmanial properties were evaluated.
Bornyl caffeate (1) was previously isolated by us from Valeriana (V.) wallichii rhizomes and identified as an anti-leishmanial substance. Here, we screened a small compound library of synthesized derivatives 1–30 for activity against schistosomula of Schistosoma (S.) mansoni. Compound 1 did not show any anti-schistosomal activity. However, strong phenotypic changes, including the formation of vacuoles, degeneration and death were observed after in vitro treatment with compounds 23 (thymyl cinnamate) and 27 (eugenyl cinnamate). Electron microscopy analysis of the induced vacuoles in the dying parasites suggests that 23 and 27 interfere with autophagy.
The inhaled pharmacotherapy is fundamental in the management of obstructive lung diseases such as asthma bronchiale or chronic obstructive pulmonary disease. In this context short- and long-acting β2-agonists play a prominent role as relieve and control medication. Regarding the risk-benefit profile of an inhaled drug, the pattern of pulmonary deposition and the rate and extent of absorption into systemic circulation are essential parameters. New developments of drugs are characterized by high lung retention and improved efficacy. The aim of the present thesis was the parallel evaluation the pharmacokinetic (PK) and -dynamic (PD) properties of inhaled β2-agonists employing an isolated human lung perfusion model (IPL). The short-acting β2-agonist salbutamol and the newly developed ultra long-acting β2-agonist GW597901 were chosen for the analysis of pulmonary drug absorption and bronchodilation. In a pharmacokinetic enabling study an established human IPL setting was modified to monitor the pharmacokinetics of the β2-agonists by measuring the concentrations in perfusion fluid, lung tissue and BAL samples obtained during and after the experiments. The IPL model revealed differences in the pulmonary absorption behaviour of GW597901 and salbutamol. The lipophilic compound GW597901 was distributed to a lower extent into the perfusion fluid compared to the more hydrophilic compound salbutamol. The analyzed time profiles of nebulized salbutamol in the perfusate were consistent to with a clinical study if considering experimental conditions as the actual deposited doses and the differing volume of distribution. Thus, the suitability of the IPL model for the PK analysis of inhaled β2-agonists was confirmed. In a PK/PD study the human ex vivo model was employed for the first time for the evaluation of the clinical relevant bronchodilating effect induced by inhaled β2-agonists in addition to the analysis of their pharmacokinetics. Thereby the focus was to determine the onset and extent of bronchodilation. A new method was established to monitor changes in lung function parameters due to pharmacodynamic interventions over the duration of the experiment that allowed permanent online recording of the ventilation volume and lung mechanic parameters. Bronchial challenges with aerolised MCh were performed successfully in isolated ventilated human lung lobes, even though the responder rate was lower than expected despite high administered doses. The administration of the short acting agent salbutamol led to an immediate onset of action recognized as a sudden increase of the ventilation volumes. The bronchodilation following the application of GW597901 was observed delayed after about 6 min. Monitored lung function parameters considerably improved by both β2 - agonists in the IPL setting but not significantly different. Thus, in regard of the different applied doses GW597901 had a higher intrinsic activity and bronchodilating potency than salbutamol. The concentrations of salbutamol and GW597901 in the perfusate determined in the PK/PD study were significantly lower than those observed in the pharmacokinetic enabling study, while the tmax values and the course of the distribution profiles remained similar. Most likely, the application of nebulized MCh prior to the administration of the β2 - agonists had a substantial influence on their pharmacokinetic behaviour. It is yet not clear whether pharmacodynamic effects or molecular competition processes for the passage to the systemic circulation or both influenced the redistribution of the β2 - agonists as seen in the PK/PD study. The potential clinical relevance of this observation has to be further investigated. The development of pulmonary edema during the experiment was one limitation of the IPL model. For the determination of the onset of edema formation four potential biochemical markers, specifically surfactant-protein A (SP-A), angiotensin-converting enzyme (ACE), urea and lactate dehydrogenase, were measured in perfusion fluids. In this context, an ELISA method for the quantification of human SP-A in biological matrices was successfully established. The investigations showed that the concentrations of SP-A and ACE in the perfusate increased over time as a sign for lung tissue damage and correlated with the degree of edema formation. For the first time the IPL model was used for the evaluation of potential pulmonary edema marker and the results have shown that it is valuable tool for further investigations in this field. In conclusion, the pharmacokinetic and pharmacodynamic characterization of GW597901 and salbutamol was successfully achieved using the IPL model. This ex vivo methodology may contribute to further insights and understanding of the complex pharmacokinetic processes of inhaled β2 – agonists in the lung.