Refine
Has Fulltext
- yes (357)
Is part of the Bibliography
- yes (357)
Year of publication
Document Type
- Journal article (256)
- Doctoral Thesis (71)
- Preprint (30)
Language
- English (357) (remove)
Keywords
- Anorganische Chemie (64)
- boron (55)
- Boron (16)
- diborenes (15)
- borylation (14)
- luminescence (13)
- fluorescence (12)
- inorganic chemistry (12)
- structure elucidation (10)
- Chemie (9)
Institute
- Institut für Anorganische Chemie (357) (remove)
Sonstige beteiligte Institutionen
- Fraunhofer Insitut für Silicatforschung ISC (1)
- Fraunhofer-Institut für Chemische Technologie (ICT) (1)
- Institut Ruđer Bošković, Zagreb, Croatia (1)
- Institut für Organische Chemie, RWTH Aachen (1)
- Institute for Sustainable Chemistry & Catalysis with Boron (1)
- Institute of Transformative Bio-Molecules, Nagoya University, Nagoya, Japan (1)
- Paul Scherrer Institut (1)
- The Chinese University of Hong Kong (1)
- The University of Sussex (1)
- Université de Bordeaux, Bordeaux, France (1)
This Ph.D. thesis has addressed several main issues in current ASSB research within four studies. Ceramic ASSBs are meant to enable the implementation of Li-metal anodes and high voltage cathode materials, which would increase energy density, power density, life time as well as safety aspects in comparison with commercially available liquid electrolyte LiBs. In this thesis, several scientific questions arising on the cathode side of ASSBs have been focused on. With respect to the target system of a ternary composite bulk cathode consisting of ceramic active material, ceramic SSE and an electrically conductive component, studies about the thermal stabilities of these components and their impact on the electrochemical performance have been conducted. Particulate bulk cathode composites have to fulfil electrochemical, chemical, mechanical and structural requirements in order to compete with commercial LiBs. Particularly, the production process requires high-temperature sintering to obtain firmly bonded contacts in order to maximize the electrochemically active area, charge transfer and ionic conduction. However, interdiffusion, intermixing and decomposition of the initial components during sintering result in low-performing ASSBs so far.
These side reactions during high-temperature treatment have been investigated in order to gain a better understanding of these mechanisms and to enable a better controlling of the manufacturing process as well as to simplify the choice of material combinations. The first two parts of this thesis deal with the thermal stability of the ceramic SSE LATP in combination with various active materials and with the validation of a probable improvement of the sintering process due to liquid phase sintering of LATP by adding Li3PO4. In the third and fourth parts, the impact of interdiffusion, intermixing and decomposition on the electrochemical performance of TF-SSBs based on the active material LMO and the ceramic SSE Ga-LLZO has been investigated.
π-Conjugated organic polymers have attracted tremendous attention in the last decades, and the interest in these materials is mainly driven by their applicability in next-generation electronic and optoelectronic devices (OLEDs, OFETs, photovoltaics). The partial or complete replacement of carbon atoms by main group elements in conjugated polymers can significantly change the characteristics and applications of these macromolecules. In this work, a class of inorganic polymers comprising a backbone of exclusively boron and nitrogen atoms (poly(iminoborane)s, PIBs) and their monodisperse oligomers is described. In addition, novel inorganic–organic hybrid polymers containing BN units in their polymer backbone were synthesized and characterized.
In chapter 2.1, the development of catalytic B–N coupling routes for the controlled synthesis of macromolecular materials is described. While the reaction of an N-silyl-B-chloro-aminoborane with the electrophilic reagent trimethylsilyl triflate led to effective B–N coupling, the reaction with a silver(I) salt resulted in an intramolecular Cl/Me exchange between the boron and silicon centers.
In chapter 2.2-2.4, the study of oligo- and poly(iminoborane)s is discussed. Monodisperse and cyclolinear oligo(iminoborane)s based on diazaborolidines with up to 7 boron and 8 nitrogen atoms were synthesized by successively extending the B-N main chain. However, the use of benzodiazaborolines only led to limited BN catenation. Furthermore, the redistribution processes resulting from the reaction of longer oligomers with non-stoichiometric amounts of (di)halogenated boranes is reported.
In chapter 2.5-2.6, the synthesis of 1,2,5-azadiborolanes as building blocks for the synthesis of poly(iminoborane)s and inorganic-organic hybrid polymers is described. While the attempt to apply an azadiborolane with sterically demanding groups on the boron-bridging ethylene unit for the construction of PIB was unfeasible, it was successfully incorporated in inorganic-organic hybrid polymers. Photophysical studies indicated π-conjugation along the polymer chain. A first attempt to synthesize PIBs based on azadiborolanes with unsubstituted ethylene units showed promising results.
In chapter 2.7-2.8, a comprehensive study of poly(arylene iminoborane)s, which are BN analogs of poly(arylene vinylene)s is described, and the properties of four polymers as well as twelve monodisperse oligomers were investigated. Photophysical investigations of the monomers, dimers and polymers showed a systematic bathochromic shift of the absorption maximum with increasing chain length and thiophene content. Based on TD-DFT calculations of the model oligomers, the lowest-energy absorption band could be assigned to HOMO to LUMO transitions with π-π* character. The oligo- and poly(arylene iminoborane)s showed only very weak to no emission in solution but they were emissive in the solid state. For four oligomers the aggregation induced emission (AIE) in a THF/water mixture was investigated and DLS studies confirmed the formation of nanoaggregates.
In chapter 2.9, oligo- and polymerizations of sulfur-containing building blocks and subsequent pH-triggered degradation of the products is described. While a sulfilimine-containing oligomer could not be isolated, the sulfone-, sulfoximine-, and sulfoxide-containing molecular oligomers and polymers could be successfully synthesized by B=N or B–O bond formation reactions. The sulfur-containing building blocks were successfully released under acidic or basic conditions, which was confirmed by NMR spectroscopy and mass spectrometry.
Activation of Ge−H and Sn−H Bonds with N‐Heterocyclic Carbenes and a Cyclic (Alkyl)(amino)carbene
(2023)
A study of the reactivity of several N‐heterocyclic carbenes (NHCs) and the cyclic (alkyl)(amino)carbene 1‐(2,6‐di‐iso‐propylphenyl)‐3,3,5,5‐tetramethyl‐pyrrolidin‐2‐ylidene (cAAC\(^{Me}\)) with the group 14 hydrides GeH2Mes2 and SnH2Me2 (Me=CH\(_{3}\), Mes=1,3,5‐(CH\(_{3}\))\(_{3}\)C\(_{6}\)H\(_{2}\)) is presented. The reaction of GeH\(_{2}\)Mes\(_{2}\) with cAAC\(^{Me}\) led to the insertion of cAAC\(^{Me}\) into one Ge−H bond to give cAAC\(^{Me}\)H−GeHMes\(_{2}\) (1). If 1,3,4,5‐tetramethyl‐imidazolin‐2‐ylidene (Me\(_{2}\)Im\(^{Me}\)) was used as the carbene, NHC‐mediated dehydrogenative coupling occurred, which led to the NHC‐stabilized germylene Me\(_{2}\)Im\(^{Me}\)⋅GeMes\(_{2}\) (2). The reaction of SnH\(_{2}\)Me\(_{2}\) with cAAC\(^{Me}\) also afforded the insertion product cAAC\(^{Me}\)H−SnHMe\(_{2}\) (3), and reaction of two equivalents Me\(_{2}\)Im\(^{Me}\) with SnH\(_{2}\)Me\(_{2}\) gave the NHC‐stabilized stannylene Me\(_{2}\)Im\(^{Me}\)⋅SnMe\(_{2}\) (4). If the sterically more demanding NHCs Me\(_{2}\)Im\(^{Me}\), 1,3‐di‐isopropyl‐4,5‐dimethyl‐imidazolin‐2‐ylidene (iPr\(_{2}\)Im\(^{Me}\)) and 1,3‐bis‐(2,6‐di‐isopropylphenyl)‐imidazolin‐2‐ylidene (Dipp\(_{2}\)Im) were employed, selective formation of cyclic oligomers (SnMe\(_{2}\))\(_{n}\) (5; n=5–8) in high yield was observed. These cyclic oligomers were also obtained from the controlled decomposition of cAAC\(^{Me}\)H−SnHMe\(_{2}\) (3).
Amber Light Control of Peptide Secondary Structure by a Perfluoroaromatic Azobenzene Photoswitch
(2023)
The incorporation of photoswitches into the molecular structure of peptides and proteins enables their dynamic photocontrol in complex biological systems. Here, a perfluorinated azobenzene derivative triggered by amber light was site‐specifically conjugated to cysteines in a helical peptide by perfluoroarylation chemistry. In response to the photoisomerization (trans→cis) of the conjugated azobenzene with amber light, the secondary structure of the peptide was modulated from a disorganized into an amphiphilic helical structure.
The development of ligands capable of effectively stabilizing highly reactive main‐group species has led to the experimental realization of a variety of systems with fascinating properties. In this work, we computationally investigate the electronic, structural, energetic, and bonding features of proximity‐enforced group 13–15 homodimers stabilized by a rigid expanded pincer ligand based on the 1,8‐naphthyridine (napy) core. We show that the redox‐active naphthyridine diimine (NDI) ligand enables a wide variety of structural motifs and element‐element interaction modes, the latter ranging from isolated, element‐centered lone pairs (e.g., E = Si, Ge) to cases where through‐space π bonds (E = Pb), element‐element multiple bonds (E = P, As) and biradical ground states (E = N) are observed. Our results hint at the feasibility of NDI‐E2 species as viable synthetic targets, highlighting the versatility and potential applications of napy‐based ligands in main‐group chemistry.
The 2‐aryl‐3,4,5,6‐tetraphenyl‐1,2‐azaborinines 1‐EMe\(_{3}\) and 2‐EMe\(_{3}\) (E=Si, Sn; aryl=Ph (1), Mes (=2,4,6‐trimethylphenyl, 2)) were synthesized by ring‐expansion of borole precursors with N\(_{3}\)EMe\(_{3}\)‐derived nitrenes. Desilylative hydrolysis of 1‐ and 2‐SiMe\(_{3}\) yielded the corresponding N‐protonated azaborinines, which were deprotonated with nBuLi or MN(SiMe\(_{3}\))\(_{2}\) (M=Na, K) to the corresponding group 1 salts, 1‐M and 2‐M. While the lithium salts crystallized as monomeric Lewis base adducts, the potassium salts formed coordination polymers or oligomers via intramolecular K⋅⋅⋅aryl π interactions. The reaction of 1‐M or 2‐M with CO\(_{2}\) yielded N‐carboxylate salts, which were derivatized by salt metathesis to methyl and silyl esters. Salt metathesis of 1‐M or 2‐M with methyl triflate, [Cp*BeCl] (Cp*=C\(_{5}\)Me\(_{5}\)), BBr\(_{2}\)Ar (Ar=Ph, Mes, 2‐thienyl), ECl\(_{3}\) (E=B, Al, Ga) and PX\(_{3}\) (X=Cl, Br) afforded the respective group 2, 13 and 15 1,2‐azaborinin‐2‐yl complexes. Salt metathesis of 1‐K with BBr\(_{3}\) resulted not only in N‐borylation but also Ph‐Br exchange between the endocyclic and exocyclic boron atoms. Solution \(^{11}\)B NMR data suggest that the 1,2‐azaborinin‐2‐yl ligand is similarly electron‐withdrawing to a bromide. In the solid state the endocyclic bond length alternation and the twisting of the C\(_{4}\)BN ring increase with the sterics of the substituents at the boron and nitrogen atoms, respectively. Regression analyses revealed that the downfield shift of the endocyclic \(^{11}\)B NMR resonances is linearly correlated to both the degree of twisting of the C\(_{4}\)BN ring and the tilt angle of the N‐substituent. Calculations indicate that the 1,2‐azaborinin‐1‐yl ligand has no sizeable π‐donor ability and that the aromaticity of the ring can be subtly tuned by the electronics of the N‐substituent.
The 1st chapter provides a detailed review of the development of synthetic approaches to triarylboranes from their first report nearly 135 years ago to the present. In the 2nd chapter, a novel and convenient methodology is reported for the one-pot synthesis of sterically-congested triarylboranes, using bench-stable aryltrifluoroborates as the boron source. The new procedure gives access to symmetrically- and unsymmetrically-substituted triarylboranes. The borylated triarylboranes are suggested as building blocks for the design of functional materials. In the 3rd chapter, four luminescent tetracationic bis-triarylborane DNA and RNA sensors that show high binding affinities, in several cases even in the nM range, are investigated. The molecular structures of two of the neutral precursors reveal some structural flexibility for these compounds in the solid state. The compounds were found to be highly emissive even in water and DNA and RNA binding affinities were found to be dependent on linker length and flexibility. Strong SERS responses for three of the four compounds demonstrate the importance of triple bonds for strong Raman activity in molecules of this compound class. In chapter 4, the compound class of water-soluble tetracationic bis-triarylborane chromophores is extended by EDOT-linked compounds and those are compared to their thiophene-containing analogs. Absorption and emission are significantly red-shifted in these compounds, compared to their thiophene-containing analogs and, due to a large Stokes shift, one of the reported compounds exhibits the most bathochromically shifted emission, observable well into the near infrared region, of all tetracationic water-soluble bis-triarylborane chromophores reported to date. Long-lived excited states, completely quenched by oxygen, were observed for the water-stable compounds of this study via transient absorption spectroscopy and a quantum yield for singlet oxygen formation of 0.6 was determined for one of them.
Bisdiynes undergo Pd(0)-catalyzed cyclization, forming azulene and naphthalene products. When dibenzylideneacetone is present in the reaction, it undergoes a [2+2+2] cyclization with the bisdiyne, forming cyclohexadiene derivatives. Ni(0) catalyzes the [2+2+2] cycloaddition of diynes with tolanes towards alkynylated o-terphenyl derivatives. The D-A substituted products are solvatochromic, fluorescent dyes with high quantum yields and short lifetimes. Bis-triarylborane tetrayne dyes were synthesized in both neutral and tetracationic forms, as potential DNA/RNA sensor. Both molecules are weakly fluorescent in solution and exhibit characteristic alkyne absorptions in the Raman spectra. Tributyl phosphine catalyzes the trans-hydroboration of 1,3-butadiynes with HBpin. We confirmed experimentally via NMR and HRMS experiments, that phosphine attack on the diyne is a key step in the catalytic cycle.
1. Bis(1-(4-tolyl)-carboran-2-yl)-(4-tolyl)-borane, a new bis(o-carboranyl)-(R)-borane 1 was synthesised by lithiation of the o-carboranyl precursor and subsequent salt metathesis reaction with (4-tolyl)BBr2. Cyclic voltammetry experiments on 1 show multiple distinct reduction events with a one-electron first reduction. In a selective reduction experiment the corresponding paramagnetic radical anion 1•− was isolated and characterized. Single-crystal structure analyses allow an in-depth comparison of 1, 1•−, their calculated geometries, and the S1 excited state of 1.
2. The choice of backbone linker for ortho-bis-(9-borafluorene)s has a great influence on the LUMO located at the boron centers and therefore the reactivity of the respective compounds. Herein, we report the room temperature rearrangement of 1,2-bis-(9-borafluorenyl-)-ortho-carborane, C2B10H10-1,2-[B(C12H8)]2 ([2a]) featuring o-carborane as the inorganic three-dimensional backbone and the synthesis of 1,2-bis-(9-borafluorenyl-)benzene, C6H4-1,2-[B(C12H8)]2 (2b) its phenylene analog. DFT calculations on the transition state for the rearrangement support an intramolecular C–H bond activation process via an SEAr-like mechanism in [2a], and predicted that the same rearrangement would take place in 2b, but at elevated temperatures, which indeed proved to be the case.
3. We synthesized 4 a julolidine-like pyrenyl-o-carborane, with pyrene substituted at the 2,7-positions on the HOMO/LUMO nodal plane, continuing our research. Using solid state molecular structures, photophysical data, cyclic voltammetry, DFT and TD-DFT calculations we compare o-carborane and the B(mes)2 (mes = 2,4,6-Me3C6H2) as acceptor groups and confirm the julolidine-like donor strength.
A series of tetracationic bis-triarylborane dyes, differing in the aromatic linker connecting two dicationic triarylborane moieties, showed very high submicromolar affinities toward ds-DNA and ds-RNA. The linker strongly influenced the emissive properties of triarylborane cations and controlled the fluorimetric response of dyes. The fluorene-analog shows the most selective fluorescence response between AT-DNA, GC-DNA, and AU-RNA, the pyrene-analog’s emission is non-selectively enhanced by all DNA/RNA, and the dithienyl-diketopyrrolopyrrole analog’s emission is strongly quenched upon DNA/RNA binding. The emission properties of the biphenyl-analog were not applicable, but the compound showed specific induced circular dichroism (ICD) signals only for AT-sequence-containing ds-DNAs, whereas the pyrene-analog ICD signals were specific for AT-DNA with respect to GC-DNA, and also recognized AU-RNA by giving a different ICD pattern from that observed upon interaction with AT-DNA. The fluorene- and dithienyl-diketopyrrolopyrrole analogs were ICD-signal silent. Thus, fine-tuning of the aromatic linker properties connecting two triarylborane dications can be used for the dual sensing (fluorimetric and CD) of various ds-DNA/RNA secondary structures, depending on the steric properties of the DNA/RNA grooves.
N-heterocyclic carbenes (NHC) are utilized for the stabilization of reactive compounds, for the activation of strong bonds, and as ligands in transition metal chemistry. In contrast to neutral NHCs, few examples of anionic or even dianionic NHCs are known. One approach for the synthesis of anionic carbenes is the deprotonation of neutral or anionic precursors, bearing Lewis acids instead of alkyl or aryl substituents. Following this strategy, novel anionic and dianionic NHCs, featuring weakly coordinating fluorinated borane and phosphorane substituents or coordinating tricyanoborane substituents were synthesized within the scope of this thesis. These carbenes possess unprecedented stabilities compared to related species. Furthermore, their electronic and steric properties can be directly adjusted by the type of Lewis acid attached. Their potential as ligands with highly shielding weakly coordinating substituents next to the carbene coordination center was demonstrated by the syntheses of the respective NHC selenium adducts and NHC gold(I) complexes. In contrast anionic NHCs with coordinating tricyanoborane moieties have an outstanding potential as ditopic ligands with coordination being possible at the carbene center and via the cyano groups. Their beneficial ligand properties were demonstrated by the syntheses of the respective NHC selenium adducts and NHC nickeltricarbonyl complexes. The combination of electronic properties, the large buried volume, the negative charge, the possibility to act as ditopic or ligands with weakly coordinating groups, and the ease of accessibility render borane- and phosphorane functionalized NHCs unique novel ligands. A further project of this PhD thesis deals with the steric properties of Lewis acids. Therefore, an easy-to-apply model was designed to quantify the steric demand of Lewis acids. Using the results of this evaluation, a second model was developed which judges the steric repulsion in Lewis acid/base adduct formation for arbitrary sets of acids and bases.
This thesis describes the synthesis and reactivity of bis-NHC ligated nickel(0)-complexes and their application in catalytic cyclization and borylation reactions of alkynes. The focus of the presented work lies on the investigation of the electronic and steric impact of different NHC ligands on the reactivity and catalytic activity of [Ni(NHC)2] complexes. Since d10 ML2 complexes play a decisive role for numerous catalytic reactions, such as the Suzuki-Miyaura cross-coupling, the first chapter provides an overview about the general properties of NHCs and the chemistry of NHC-ligated nickel complexes, their synthesis, characterization, reactivity, and application in catalysis.
The Fischer carbene synthesis, involving the conversion of a transition metal (TM)-bound CO ligand to a carbene ligand of the form [=C(OR’)R] (R, R’ = organyl groups), is one of the seminal reactions in the history of organometallic chemistry. Carbonyl complexes of p-block elements, of the form [E(CO)n] (E = main-group fragment), are much less abundant than their TM cousins; this scarcity and the general instability of low-valent p-block species means that replicating the historical reactions of TM carbonyls is often very difficult. Here we present a step-for-step replica of the Fischer carbene synthesis at a borylene carbonyl involving nucleophilic attack at the carbonyl carbon followed by electrophilic quenching at the resultant acylate oxygen atom. These reactions provide borylene acylates and alkoxy-/silyloxy-substituted alkylideneboranes, main-group analogues of the archetypal transition metal acylate and Fischer carbene families, respectively. When either the incoming electrophile or the boron center has a modest steric profile, the electrophile instead attacks at the boron atom, leading to carbene-stabilized acylboranes – boron analogues of the well-known transition metal acyl complexes. These results constitute faithful main-group replicas of a number of historical organometallic processes and pave the way to further advances in the field of main-group metallomimetics.
Among the parent borirane, benzoborirene and ortho‐dicarbadodecaborane‐fused borirane, the latter possesses the highest ring strain and the highest Lewis acidity according to our density functional theory (DFT) studies. The synthesis of this class of compounds is thus considerably challenging. The existing examples require either a strong π‐donating group or an extra ligand for B‐coordination, which nevertheless suppresses or completely turns off the Lewis acidity. The title compound, which possesses both features, not only allows the 1,2‐insertion of P=O, C=O or C≡N to proceed under milder conditions, but also enables the heretofore unknown dearomative 1,4‐insertion of Ar−(C=O)− into a B−C bond. The fusion of strained molecular systems to an o‐carborane cage shows great promise for boosting both the ring strain and acidity.
A cyclic alkyl(amino)carbene (CAAC)‐stabilized dicoordinate aminoborylene is synthesized by the twofold reduction of a [(CAAC)BCl\(_{2}\)(TMP)] (TMP=2,6‐tetramethylpiperidyl) precursor. NMR‐spectroscopic, X‐ray crystallographic and computational analyses confirm the cumulenic nature of the central C=B=N moiety. Irradiation of [(CAAC)B(TMP)] (2) resulted in an intramolecular C−C bond activation, leading to a doubly‐fused C\(_{10}\)BN heterocycle, while the reaction with acetonitrile resulted in an aryl migration from the CAAC to the acetonitrile nitrogen atom, concomitant with tautomerization of the latter to a boron‐bound allylamino ligand. One‐electron oxidation of 2 with CuX (X=Cl, Br) afforded the corresponding amino(halo)boryl radicals, which were characterized by EPR spectroscopy and DFT calculations. Placing 2 under an atmosphere of CO afforded the tricoordinate (CAAC,CO)‐stabilized aminoborylene. Finally, the twofold oxidation of 2 with chalcogens led, in the case of N\(_{2}\)O and sulfur, to the splitting of the B−C\(_{CAAC}\) bond and formation of the 2,4‐diamino‐1,3,2,4‐dichalcogenadiboretanes and CAAC‐chalcogen adducts, whereas with selenium a monomeric boraselenone was isolated, which showed some degree of B−Se multiple bonding.
Carbene‐stabilized diborynes of the form LBBL (L=N‐heterocyclic carbene (NHC) or cyclic alkyl(amino)carbene (CAAC)) induce rapid, high yielding, intermolecular ortho‐C−H borylation at N‐heterocycles at room temperature. A simple pyridyldiborene is formed when an NHC‐stabilized diboryne is combined with pyridine, while a CAAC‐stabilized diboryne leads to activation of two pyridine molecules to give a tricyclic alkylideneborane, which can be forced to undergo a further H‐shift resulting in a zwitterionic, doubly benzo‐fused 1,3,2,5‐diazadiborinine by heating. Use of the extended N‐heteroaromatic quinoline leads to a borylmethyleneborane under mild conditions via an unprecedented boron‐carbon exchange process.
This work involves the synthesis and reactivity of pseudohalide-substituted boranes and borylenes. A series of compounds of the type (CAAC)BR2Y (CAAC = cyclic alkyl(amino)carbene; R = H, Br; Y = CN, NCS, PCO) were prepared first. The two-electron reduction of (CAAC)BBr2Y (Y = CN, NCS) in the presence of a second Lewis base L (L = N-heterocyclic carbene) resulted in the formation of the corresponding doubly Lewis base-stabilized pseudohaloborylenes (CAAC)(L)BY. These borylenes show versatile reactivity patterns, including their oxidation to the corresponding radical cations, coordination via the respective pseudohalide substituent to group 6 metal carbonyl complexes, as well as a boron-centered protonation with Brønsted acids to boronium cations. Reduction of (CAAC)BBr2(NCS) in the absence of a second donor ligand, led to the formation of boron-doped thiazolothiazoles via reductive dimerization of two isothiocyanatoborylenes. These B,N,S-heterocycles possess a low degree of aromaticity as well as interesting photophysical properties and can furthermore be protonated as well as hydroborated. Additionally, CAAC adducts of the parent boraphosphaketene (CAAC)BH2(PCO) could be prepared, which readily reacted with boroles [Ph4BR'] (R' = aryl) via decarbonylation in a ring expansion reaction. The obtained 1,2-phosphaborinines represent B,P-isosteres of benzene and consequently could be coordinated to metal carbonyl complexes of the chromium triade via η6-coordination, resulting in new half-sandwich complexes thereof.
The diorgano(bismuth)alcoholate [Bi((C\(_{6}\)H\(_{4}\)CH\(_{2}\))\(_{2}\)S)OPh] (1-OPh) has been synthesized and fully characterized. Stoichiometric reactions, UV/Vis spectroscopy, and (TD-)DFT calculations suggest its susceptibility to homolytic and heterolytic Bi−O bond cleavage under given reaction conditions. Using the dehydrocoupling of silanes with either TEMPO or phenol as model reactions, the catalytic competency of 1-OPh has been investigated (TEMPO=(tetramethyl-piperidin-1-yl)-oxyl). Different reaction pathways can deliberately be addressed by applying photochemical or thermal reaction conditions and by choosing radical or closed-shell substrates (TEMPO vs. phenol). Applied analytical techniques include NMR, UV/Vis, and EPR spectroscopy, mass spectrometry, single-crystal X-ray diffraction analysis, and (TD)-DFT calculations.
The synthesis and characterization of laterally extended azabora[5]‐, ‐[6]‐ and ‐[7]helicenes, assembled from N‐heteroaromatic and dibenzo[g,p]chrysene building blocks is described. Formally, the π‐conjugated systems of the pristine azaborole helicenes were enlarged with a phenanthrene unit leading to compounds with large Stokes shifts, significantly enhanced luminescence quantum yields (Φ) and dissymmetry factors (g\(_{lum}\)). The beneficial effect on optical properties was also observed for helical elongation. The combined contributions of lateral and helical extensions resulted in a compound showing green emission with Φ of 0.31 and |g\(_{lum}\)| of 2.2×10\(^{−3}\), highest within the series of π‐extended azaborahelicenes and superior to emission intensity and chiroptical response of its non‐extended congener. This study shows that helical and lateral extensions of π‐conjugated systems are viable strategies to improve features of azaborole helicenes. In addition, single crystal X‐ray analysis of configurationally stable [6]‐ and ‐[7]helicenes was used to provide insight into their packing arrangements.
Photo‐initiated intramolecular charge transfer (ICT) processes play a pivotal role in the excited state reaction dynamics in donor‐bridge‐acceptor systems. The efficacy of such a process can be improved by modifying the extent of π‐conjugation, relative orientation/twists of the donor/acceptor entities and polarity of the environment. Herein, 4‐dimethylamino‐4′‐cyanodiphenylacetylene (DACN‐DPA), a typical donor‐π‐bridge‐acceptor system, was chosen to unravel the role of various internal coordinates that govern the extent of photo‐initiated ICT dynamics. Transient absorption (TA) spectra of DACN‐DPA in n‐hexane exhibit a lifetime of >2 ns indicating the formation of a triplet state while, in acetonitrile, a short time‐constant of ∼2 ps indicates the formation of charge transferred species. Ultrafast Raman loss spectroscopy (URLS) measurements show distinct temporal and spectral dynamics of Raman bands associated with C≡C and C=C stretching vibrations. The appearance of a new band at ∼1492 cm\(^{−1}\) in acetonitrile clearly indicates structural modification during the ultrafast ICT process. Furthermore, these observations are supported by TD‐DFT computations.
Ten thiosemicarbazone ligands obtained by condensation of pyridine-2-carbaldehyde, quinoline-2-carbaldehyde, 2-acetylpyridine, 2-acetylquinoline, or corresponding 2-pyridyl ketones with thiosemicarbazides RNHC(S)NHNH\(_{2}\) and R=CH\(_{3}\), C\(_{6}\)H\(_{5}\) were prepared in good yield. The reaction of [PdCl\(_{2}\)(cod)] with cod=1,5-cyclooctadiene or K\(_{2}\)[PtCl\(_{4}\)] resulted in a total of 17 Pd(II) and Pt(II) complexes isolated in excellent purity, as demonstrated by \(^{1}\)H, \(^{13}\)C, and, where applicable, \(^{195\)Pt NMR spectroscopy combined with CHNS analysis. The cytotoxicity of the title compounds was studied on four human glioblastoma cell lines (GaMG, U87, U138, and U343). The most active compound, with a Pd(II) metal centre, a 2-quinolinyl ring, and methyl groups on both the proximal C and distal N atoms exhibited an EC\(_{50}\) value of 2.1 μM on the GaMG cell lines, thus being slightly more active than cisplatin (EC\(_{50}\) 3.4 μM) and significantly more potent than temozolomide (EC\(_{50}\) 67.1 μM). Surprisingly, the EC\(_{50}\) values were inversely correlated with the lipophilicity, as determined with the “shake-flask method”, and decreased with the length of the alkyl substituents (C\(_{1}\)>C\(_{8}\)>C\(_{10}\)). Correlation with the different structural motifs showed that for the most promising anticancer activity, a maximum of two aromatic rings (either quinolinyl or pyridyl plus phenyl) combined with one methyl group are favoured and the Pd(II) complexes are slightly more potent than their Pt(II) analogues.
Designing highly efficient purely organic phosphors at room temperature remains a challenge because of fast non-radiative processes and slow intersystem crossing (ISC) rates. The majority of them emit only single component phosphorescence. Herein, we have prepared 3 isomers (o, m, p-bromophenyl)-bis(2,6-dimethylphenyl)boranes. Among the 3 isomers (o-, m- and p-BrTAB) synthesized, the ortho-one is the only one which shows dual phosphorescence, with a short lifetime of 0.8 ms and a long lifetime of 234 ms in the crystalline state at room temperature. Based on theoretical calculations and crystal structure analysis of o-BrTAB, the short lifetime component is ascribed to the T\(^M_1\) state of the monomer which emits the higher energy phosphorescence. The long-lived, lower energy phosphorescence emission is attributed to the T\(^A_1\) state of an aggregate, with multiple intermolecular interactions existing in crystalline o-BrTAB inhibiting nonradiative decay and stabilizing the triplet states efficiently.
Boric acid (BA) has been used as a transparent glass matrix for optical materials for over 100 years. However, recently, apparent room-temperature phosphorescence (RTP) from BA (crystalline and powder states) was reported (Zheng et al., Angew. Chem. Int. Ed. 2021, 60, 9500) when irradiated at 280 nm under ambient conditions. We suspected that RTP from their BA sample was induced by an unidentified impurity. Our experimental results show that pure BA synthesized from B(OMe)\(_{3}\) does not luminesce in the solid state when irradiated at 250–400 nm, while commercial BA indeed (faintly) luminesces. Our theoretical calculations show that neither individual BA molecules nor aggregates would absorb light at >175 nm, and we observe no absorption of solid pure BA experimentally at >200 nm. Therefore, it is not possible for pure BA to be excited at >250 nm even in the solid state. Thus, pure BA does not display RTP, whereas trace impurities can induce RTP.
After implementing a reliable mass spectrometry based kinetic study the indole conjugation with different organometallic indoles led to questions about the electronical and sterical influences on reactivity. The substitution pattern of the ferrocene functionalized indoles at the six-membered ring determines the electron density on the C3 atom, which reacts with the formed Schiff base. Since the experimental results showed the exact opposite trend, covalent docking studies were performed elucidating the importance of surface interactions. These studies were in harmony with the experimental results and determined lysine 33 as most preferable conjugation site as well as substitution in 6-position as most favourable pattern. The amine motif in compounds 6, 7 and 8 proofed to be easily fragmented by the ESI method used. The amide linker in 10 remains intact but shows a lower conversion. Those two inherent characteristics are however preferable for well-defined and site-specific bioconjugation. The synthesis and evaluation of piano stool complex derivatives with manganese and rhenium metal centre 15, 16, 18 and 22 gave additional guidance by the interpretation of applicable structural motifs. The electron-withdrawing carbonyl groups lead to the hindrance of fulvene formation and thus to no fragmentation as seen with the ferrocene group. The total conversion is low compared to 8, only 22 shows a good enough conversion to mainly monoconjugate of 45% and a possible radio-labelling application as 99mTc analogue. As consequence manganese complexes with a stable facial tricarbonyl unit and a tridentate chelator with 4-, 5- and 6-substituted aminomethylindole conjugated through an amide bond were synthesized and consecutively evaluated. The resulting organometallic indole derivatives 29, 30 and 31 all showed a total conversion around 40% similar to 16, but at the same time a rate constant in the range of 10-4 s-1 like the organic indole. Besides the similar conversion, the rate constants followed the trend of the 6-substituted derivative as fastest and then 5- and 4- substituted derivative with decreasing reactivity. For underlining the usage as technetium label for the best out of the series 31, a rhenium analogue was prepared. The resulting compound 32 was especially interesting, because the conversion was even higher than the 70% of 8 with a total of 88%. Additionally, the rate constant was a tenfold higher as well. This rendered compound 32 as best possible 99mTc analogue for further application as radio-label. After the success of 32 and realizing the sterical benefits resulting from the flexible tridentate ligand-system, substitution at the five-membered ring was explored. The complexes 33, 34 and 35 are based on indole-2-carboxylic acid and with the difference of the length of the alkyl spacer between amide and complex to probe for the influence and sterical hindrance, but all three derivatives showed no conjugation which excludes functionalization in 2-position. As the C3 is used for the actual bioconjugation, the last possible derivatization was realized on the indole-N1 by using 1-(3-bromopropyl)indole as building block during the synthesis of the ligand-system. The corresponding manganese 36 and rhenium 37 complexes both showed similar properties of a moderate conversion like 22 and a rate constant in the range of 10-5 s-1. In conclusion the rhenium complex 32 with the 6-substitution pattern at the tridentate indole-bearing ligand remains the most promising structure.
The here developed liquid chromatography coupled mass spectrometry-based assay for the determination of inhibitory activity of drug candidates against the 3CLpro of the sever acute respiratory syndrome coronavirus type 2 was successfully implemented and especially designed to give, due to the available absorption spectra and corresponding mass traces, further insight in the otherwise through fluorescence resonance energy transfer-based assays neglected influences on the inhibition results. Starting with a literature-known quinolone containing covalent inhibitor 42 an N1-methylated derivative 43 and their analogues 44 and 45 in which the benzoic acid was exchanged for ferrocene carboxylic acid were synthesized. The inhibition of 3CLpro was evaluated by the concentration of initial 15mer peptide left after incubation and for that purpose the for 280 nm defined molar attenuation coefficient of (26.41±0.59) L*mol-1*cm-1 determined and used. The results showed a reaction of DL dithiothreitol with the less stable benzoic acid esters leading to a moderate inhibitory effect. The methylation in N1-position showed an increase in stability. The methylated and with ferrocene carboxylic acid functionalized derivative showed a complete inhibition during the timeframe of the assay. In search of a fluorescent and therefore traceable inhibitor, 4 hydroxycoumarin was used to synthesize the analogue with benzoic acid 49 and ferrocene carboxylic acid 50. Both derivatives were less stable than their analogues but exhibited the same trend of a more stable ferrocene-derived compound, which exerted a higher inhibition as well. After preparing and testing the model thioester 53 and showing an inactivation of the established inhibitor ebselen, it was concluded that the reaction with DL dithiothreitol reduces the concentration of active intact inhibitor and therefore decreases the inhibition rate during the assay. The next step was proofing the reducing agent as non-essential for the fast assay conducted in a timeframe of 5 min to circumvent the negative influence of DL dithiothreitol. By excluding every inhibition-altering part, the resulting method is the perfect tool for precise statements in relation of inhibitory activity. Then the inhibition assay was repeated for ebselen and the best out of the here introduced organometallic inhibitors 45. Both give equivalent results of a complete inhibition during the measurement. The implemented liquid chromatography coupled mass spectrometry-based assay has many advantages over the fluorescence resonance energy transfer-based assays in which all the information and insight accumulated by the evaluation of uv/vis traces and mass spectra are not available leading to wrong or deviating results regarding the inhibitory capacity of inhibitor candidates.
Ionic liquids-assisted ring opening of three-membered heterocycles with thio- and seleno-silanes
(2022)
Ring opening reactions of strained heterocycles (epoxides, aziridines, thiiranes) by silyl chalcogenides, such as thiosilanes and selenosilanes, can be efficiently performed in a variety of ionic liquids, which can behave as reaction media and in some cases also as catalysts. This protocol enables an alternative access to β-functionalized sulfides and selenides under mild conditions.
A practical and direct method was developed for the production of versatile alkyl boronate esters via transition metal-free borylation of primary and secondary alkyl sulfones. The key to the success of the strategy is the use of bis(neopentyl glycolato) diboron (B\(_{2}\)neop\(_{2}\)), with a stoichiometric amount of base as a promoter. The practicality and industrial potential of this protocol are highlighted by its wide functional group tolerance, the late-stage modification of complex compounds, no need for further transesterification, and operational simplicity. Radical clock, radical trap experiments, and EPR studies were conducted which show that the borylation process involves radical intermediates.
TUCAN is a canonical serialization format that is independent of domain-specific concepts of structure and bonding. The atomic number is the only chemical feature that is used to derive the TUCAN format. Other than that, the format is solely based on the molecular topology. Validation is reported on a manually curated test set of molecules as well as a library of non-chemical graphs. The serialization procedure generates a canonical “tuple-style” output which is bidirectional, allowing the TUCAN string to serve as both identifier and descriptor. Use of the Python NetworkX graph library facilitated a compact and easily extensible implementation.
A one-pot synthesis of a CAAC-stabilized, unsymmetrical, cyclic diborene was achieved via consecutive two-electron reduction steps from an adduct of CAAC and B\(_2\)Br\(_4\)(SMe\(_2\))\(_2\). Theoretical studies revealed that this diborene has a considerably smaller HOMO–LUMO gap than those of reported NHC- and phosphine-supported diborenes. Complexation of the diborene with [AuCl(PCy\(_3\))] afforded two diborene–Au\(^I\) π complexes, while reaction with DurBH\(_2\), P\(_4\) and a terminal acetylene led to the cleavage of B−H, P−P, and C−C π bonds, respectively. Thermal rearrangement of the diborene gave an electron-rich cyclic alkylideneborane, which readily coordinated to Ag\(^I\) via its B=C double bond.
The solvatochromic behavior of two donor-π bridge-acceptor (D-π-A) compounds based on the 2-(3-boryl-2-thienyl)thiazole π-linker and indandione acceptor moiety are investigated. DFT/TD-DFT calculations were performed in combination with steady-state absorption and emission measurements, along with electrochemical studies, to elucidate the effect of two different strongly electron-donating hydrazonyl units on the solvatochromic and fluorescence behavior of these compounds. The Lippert–Mataga equation was used to estimate the change in dipole moments (Δµ) between ground and excited states based on the measured spectroscopic properties in solvents of varying polarity with the data being supported by theoretical studies. The two asymmetrical D-π-A molecules feature strong solvatochromic shifts in fluorescence of up to ~4300 cm\(^{−1}\) and a concomitant change of the emission color from yellow to red. These changes were accompanied by an increase in Stokes shift to reach values as large as ~5700–5800 cm\(^{−1}\). Quantum yields of ca. 0.75 could be observed for the N,N-dimethylhydrazonyl derivative in nonpolar solvents, which gradually decreased along with increasing solvent polarity, as opposed to the consistently reduced values obtained for the N,N-diphenylhydrazonyl derivative of up to ca. 0.20 in nonpolar solvents. These two push–pull molecules are contrasted with a structurally similar acceptor-π bridge-acceptor (A-π-A) compound.
The 2- and 2,7- substituted para-N-methylpyridinium pyrene cations show high-affinity intercalation into ds-DNAs, whereas their non-methylated analogues interacted with ds-DNA/RNA only in the protonated form (at pH 5), but not at physiological conditions (pH 7). The fluorescence from non-methylated analogues was strongly dependent on the protonation of the pyridines; consequently, they act as fluorescence ratiometric probes for simultaneous detection of both ds-DNA and BSA at pH 5, relying on the ratio between intensities at 420 nm (BSA specific) and 520 nm (DNA specific), whereby exclusively ds-DNA sensing could be switched-off by adjustment to pH 7. Only methylated, permanently charged pyrenes show photoinduced cleavage of circular DNA, attributed to pyrene-mediated irradiation-induced production of singlet oxygen. Consequently, the moderate toxicity of these cations against human cell lines is strongly increased upon irradiation. Detailed studies revealed increased total ROS production in cells treated by the compounds studied, accompanied by cell swelling and augmentation of cellular complexity. The most photo-active 2-para-N-methylpyridinium pyrene showed significant localization at mitochondria, its photo-bioactivity likely due to mitochondrial DNA damage. Other derivatives were mostly non-selectively distributed between various cytoplasmic organelles, thus being less photoactive.
A cyclic alkyl(amino)carbene‐stabilized 1,4‐diborabenzene (DBB) ligand enables the isolation of 18‐electron two‐legged parent piano‐stool Fe\(^{0}\) and Ru\(^{0}\) complexes, [(η\(^{6}\)‐DBB)M(CO)\(_{2}\)], the ruthenium complex being the first of its kind to be structurally characterized. [(η\(^{6}\)‐DBB)Fe(CO)\(_{2}\)] reacts with E\(_{4}\) (E=P, As) to yield mixed DBB‐cyclo‐E\(_{4}\) sandwich complexes with planar E\(_{4}\)\(^{2-}\) ligands. Computational analyses confirm the strong electron‐donating capacity of the DBB ligand and show that the E\(_{4}\) ligand is bound by four equivalent Fe−P σ bonds.
In this contribution, we illustrate uranium complexes bearing a pendant borate (i.e. 1 and 2) or a pendant borane (i.e. 3 and 4) moiety via reaction of the highly strained uranacycle I with various 3‐coordinate boranes. Complexes 3 and 4 represent the first examples of uranium complexes with a pendant borane Lewis acid. Moreover, complex 3 was capable of activation of CO, delivering a new CO activation mode, and an abnormal CO 1,2‐insertion pathway into a U−N bond. The importance of the pendant borane moiety was confirmed by the controlled experiments.
A modular synthesis of both difurooxa‐ and difuroazadiborepins from a common precursor is demonstrated. Starting from 2,2′‐bifuran, after protection of the positions 5 and 5’ with bulky silyl groups, formation of the novel polycycles proceeds through opening of the furan rings to a dialkyne and subsequent re‐cyclization in the borylation step. The resulting bifuran‐fused diborepins show pronounced stability, highly planar tricyclic structures, and intense blue light emission. Deprotection and transformation into dibrominated building blocks that can be incorporated into π‐extended materials can be performed in one step. Detailed DFT calculations provide information about the aromaticity of the constituent rings of this polycycle.
We report a transition metal‐free, regio‐ and stereo‐selective, phosphine‐catalyzed method for the trans hydroboration of 1,3‐diynes with pinacolborane that affords (E)‐1‐boryl‐1,3‐enynes. The reaction proceeds with excellent selectivity for boron addition to the external carbon of the 1,3‐diyne framework as unambiguously established by NMR and X‐ray crystallographic studies. The reaction displays a broad substrate scope including unsymmetrical diynes to generate products in high yield (up to 95 %). Experimental and theoretical studies suggest that phosphine attack on the alkyne is a key process in the catalytic cycle.
A study on the reactivity of N‐heterocyclic carbenes (NHCs) and the cyclic (alkyl)(amino)carbene cAAC\(^{Me}\) with selected germanium(IV) and tin(IV) chlorides and organyl chlorides is presented. The reactions of the NHCs Me\(_{2}\)Im\(^{Me}\), iPr\(_{2}\)Im\(^{Me}\) and Dipp2Im with the methyl chlorides ECl\(_{2}\)Me\(_{2}\) afforded the adducts NHC ⋅ ECl\(_{2}\)Me\(_{2}\) (E=Ge (1), Sn (2)), NHC=Me\(_{2}\)Im\(^{Me}\) (a), iPr\(_{2}\)Im\(^{Me}\) (b), Dipp\(_{2}\)Im (c)). The reaction of Me2Im\(^{Me}\) with GeCl\(_{4}\) led to isolation of Me\(_{2}\)Im\(^{Me}\) ⋅ GeCl\(_{4}\) (3), the reaction of iPr\(_{2}\)Im\(^{Me}\) with SnCl\(_{4}\) in THF afforded the THF adduct iPr\(_{2}\)Im\(^{Me}\) ⋅ SnCl\(_{4}\) ⋅ THF (4). Dipp\(_{2}\)Im ⋅ GeCl\(_{2}\)Me\(_{2}\) (1 c) isomerized into the backbone coordinated imidazolium salt [aDipp\(_{2}\)Im ⋅ GeClMe\(_{2}\)][Cl] (5) upon thermal treatment. The reactions of cAAC\(^{Me}\) with (i) ECl\(_{2}\)R\(_{2}\) (E=Ge, Sn) gave the adducts cAAC\(^{Me}\) ⋅ ECl\(_{2}\)R\(_{2}\) (R=Me: E=Ge (6); Sn (7); Ph: E=Ge (8)), with (ii) GeClMe\(_{3}\) and GeCl\(_{4}\) the salts [cAAC\(^{Me}\) ⋅ GeMe\(_{3}\)][Cl] (9) and [cAACMeCl][GeCl\(_{3}\)] (10), and (iii) with SnCl\(_{4}\) the salt [cAACMeCl][SnCl\(_{3}\)] (11) and the adduct cAAC\(^{Me}\) ⋅ SnCl\(_{4}\) (12). Reduction of 2 a with KC\(_{8}\) afforded the NHC‐stabilized stannylene Me\(_{2}\)Im\(^{Me}\) ⋅ SnMe\(_{2}\) 13, reduction of 7 with either KC8 or 1,4‐bis‐(trimethylsilyl)‐1,4‐dihydropyrazin in the presence of SnCl\(_{2}\)Me\(_{2}\) yielded cAAC\(^{Me}\) ⋅ SnMe\(_{2}\) ⋅ SnMe\(_{2}\)Cl\(_{2}\) (14).
A series of five new homoleptic, linear nickel d\(^{9}\)‐complexes of the type [Ni\(^{I}\)(NHC)\(_{2}\)]\(^{+}\) is reported. Starting from the literature known Ni(0) complexes [Ni(Mes\(_{2}\)Im)\(_{2}\)] 1, [Ni(Mes\(_{2}\)Im\(^{H2}\))2] 2, [Ni(Dipp\(_{2}\)Im)\(_{2}\)] 3, [Ni(Dipp\(_{2}\)Im\(^{H2}\))\(_{2}\)] 4 and [Ni(cAAC\(^{Me}\))\(_{2}\)] 5 (Mes\(_{2}\)Im=1,3‐bis(2,4,6‐trimethylphenyl)‐imidazolin‐2‐ylidene, Mes\(_{2}\)Im\(^{H2}\)=1,3‐bis(2,4,6‐trimethylphenyl)‐imidazolidin‐2‐ylidene, Dipp\(_{2}\)Im=1,3‐bis(2,6‐diisopropylphenyl)‐imidazolin‐2‐ylidene, Dipp\(_{2}\)Im\(^{H2}\)=1,3‐bis(2,6‐diisopropylphenyl)‐imidazolidin‐2‐ylidene, cAAC\(^{Me}\)=1‐(2,6‐diisopropylphenyl)‐3,3,5,5‐tetramethylpyrrolidin‐2‐yliden), their oxidized Ni(I) analogues [Ni\(^{I}\)(Mes\(_{2}\)Im)\(_{2}\)][BPh\(_{4}\)] 1\(^{+}\), [Ni\(^{I}\)(Mes\(_{2}\)Im\(^{H2}\))\(_{2}\)][BPh\(_{4}\)] 2\(^{+}\), [Ni\(^{I}\)(Dipp\(_{2}\)Im)\(_{2}\)][BPh\(_{4}\)] 3\(^{+}\), [Ni\(^{I}\)(Dipp\(_{2}\)Im\(^{H2}\))\(_{2}\)][BPh\(_{4}\)] 4\(^{+}\) and [Ni\(^{I}\)(cAAC\(^{Me}\))\(_{2}\)][BPh\(_{4}\)] 5\(^{+}\) were synthesized by one‐electron oxidation with ferrocenium tetraphenyl‐borate. The complexes 1\(^{+}\)–5\(^{+}\) were fully characterized including X‐ray structure analysis. The complex cations reveal linear geometries in the solid state and NMR spectra with extremely broad, paramagnetically shifted resonances. DFT calculations predicted an orbitally degenerate ground state leading to large magnetic anisotropy, which was verified by EPR measurements in solution and on solid samples. The magnetic anisotropy of the complexes is highly dependent from the steric protection of the metal atom, which results in a noticeable decrease of the g‐tensor anisotropy for the N‐Mes substituted complexes 1\(^{+}\) and 2\(^{+}\) in solution due to the formation of T‐shaped THF adducts.
A series of bis‐(4’‐pyridylethynyl)arenes (arene=benzene, tetrafluorobenzene, and anthracene) were synthesized and their bis‐N‐methylpyridinium compounds were investigated as a class of π‐extended methyl viologens. Their structures were determined by single crystal X‐ray diffraction, and their photophysical and electrochemical properties (cyclic voltammetry), as well as their interactions with DNA/RNA were investigated. The dications showed bathochromic shifts in emission compared to the neutral compounds. The neutral compounds showed very small Stokes shifts, which are a little larger for the dications. All of the compounds showed very short fluorescence lifetimes (<4 ns). The neutral compound with an anthracene core has a quantum yield of almost unity. With stronger acceptors, the analogous bis‐N‐methylpyridinium compound showed a larger two‐photon absorption cross‐section than its neutral precursor. All of the dicationic compounds interact with DNA/RNA; while the compounds with benzene and tetrafluorobenzene cores bind in the grooves, the one with an anthracene core intercalates as a consequence of its large, condensed aromatic linker moiety, and it aggregates within the polynucleotide when in excess over DNA/RNA. Moreover, all cationic compounds showed highly specific CD spectra upon binding to ds‐DNA/RNA, attributed to the rare case of forcing the planar, achiral molecule into a chiral rotamer, and negligible toxicity toward human cell lines at ≤10 μM concentrations. The anthracene‐analogue exhibited intracellular accumulation within lysosomes, preventing its interaction with cellular DNA/RNA. However, cytotoxicity was evident at 1 μM concentration upon exposure to light, due to singlet oxygen generation within cells. These multi‐faceted features, in combination with its two‐photon absorption properties, suggest it to be a promising lead compound for development of novel light‐activated theranostic agents.
Defunctionalization of readily available feedstocks to provide alkenes for the synthesis of multifunctional molecules represents an extremely useful process in organic synthesis. Herein, we describe a transition metal-free, simple and efficient strategy to access alkyl 1,2-bis(boronate esters) via regio- and diastereoselective diboration of secondary and tertiary alkyl halides (Br, Cl, I), tosylates, and alcohols. Control experiments demonstrated that the key to this high reactivity and selectivity is the addition of a combination of potassium iodide and N,N-dimethylacetamide (DMA). The practicality and industrial potential of this transformation are demonstrated by its operational simplicity, wide functional group tolerance, and the late-stage modification of complex molecules. From a drug discovery perspective, this synthetic method offers control of the position of diversification and diastereoselectivity in complex ring scaffolds, which would be especially useful in a lead optimization program.
A convenient route for the synthesis of the cAAC\(^{Me}\) (cAAC=cyclic (alkyl)(amino)carbene, cAAC\(^{Me}\)=1-(2,6-di-iso-propylphenyl)-3,3,5,5-tetramethyl-pyrrolidin-2-ylidene) and cAAC\(^{Cy}\) (cAAC\(^{Cy}\)=2-azaspiro[4.5]dec-2-(2,6-diisopropylphenyl)-3,3-dimethyl-1-ylidene) stabilized stibinidenes cAAC\(^{Me}\)⋅SbMes (2a) (Mes=2,4,6-trimethylphenyl) and cAAC\(^{Cy}\)⋅SbMes (2b) is reported. A mechanism for the formation of [cAAC\(^{R}\)Cl][SbCl\(_{3}\)Mes] 1 and cAAC\(^{R}\)⋅SbMes 2 from the reaction of cAAC with the antimony(III) precursor SbCl\(_{2}\)Mes, which proceeds via the isolable intermediate [cAAC\(^{R}\)SbClMes][SbCl\(_{3}\)Mes] (3), is proposed.
A series of unprecedently air-stable (tricyanoboryl)plumbate anions was obtained by the reaction of the boron-centered nucleophile B(CN)\(_{3}\)\(^{2-}\) with triorganyllead halides. Salts of the anions [R\(_{3}\)PbB(CN)\(_{3}\)]\(^{-}\) (R=Ph, Et) were isolated and found to be stable in air at room temperature. In the case of Me\(_{3}\)PbHal (Hal=Cl, Br), a mixture of the anions [Me\(_{4-n}\)Pb{B(CN)\(_{3}\)}\(_{n}\)]\(^{n-}\) (n=1, 2) was obtained. The [Et\(_{3}\)PbB(CN)\(_{3}\)]− ion undergoes stepwise dismutation in aqueous solution to yield the plumbate anions [Et4\(_{4-n}\)Pb{B(CN)\(_{3}\)}\(_{n}\)]\(^{n-}\) (n=1–4) and PbEt\(_{4}\) as by-product. The reaction rate increases with decreasing pH value of the aqueous solution or by bubbling O\(_{2}\) through the reaction mixture. Adjustment of the conditions allowed the selective formation and isolation of salts of all anions of the series [Et\(_{4-n}\)Pb{B(CN)\(_{3}\)}\(_{n}\)]\(^{n-}\) (n=2–4) including the homoleptic tetraanion [Pb{B(CN)\(_{3}\)}\(_{4}\)]\(^{4-}\).
Herein, we report the facile synthesis of a three-dimensional (3D) inorganic analogue of 9,10-diazido-9,10-dihydrodiboraantracene, which turned out to be a monomer in both the solid and solution state, and thermally stable up to 230 °C, representing a rare example of azido borane with boosted Lewis acidity and stability in one. Apart from the classical acid-base and Staudinger reactions, E−H bond activation (E=B, Si, Ge) was investigated. While the reaction with B−H (9-borabicyclo[3.3.1]nonane) led directly to the 1,1-addition on N\(_{α}\) upon N\(_{2}\) elimination, the Si−H (Et\(_{3}\)SiH, PhMe\(_{2}\)SiH) activation proceeded stepwise via 1,2-addition, with the key intermediates 5\(_{int}\) and 6\(_{int}\) being isolated and characterized. In contrast, the cooperative Ge−H was reversible and stayed at the 1,2-addition step.
Herein, the copper-catalyzed borylation of readily available acyl chlorides with bis(pinacolato)diboron, (B\(_{2}\)pin\(_{2}\)) or bis(neopentane glycolato)diboron (B\(_{2}\)neop\(_{2}\)) is reported, which provides stable potassium acyltrifluoroborates (KATs) in good yields from the acylboronate esters. A variety of functional groups are tolerated under the mild reaction conditions (room temperature) and substrates containing different carbon-skeletons, such as aryl, heteroaryl and primary, secondary, tertiary alkyl are applicable. Acyl N-methyliminodiacetic acid (MIDA) boronates can also been accessed by modification of the workup procedures. This process is scalable and also amenable to the late-stage conversion of carboxylic acid-containing drugs into their acylboron analogues, which have been challenging to prepare previously. A catalytic mechanism is proposed based on in situ monitoring of the reaction between p-toluoyl chloride and an NHC-copper(I) boryl complex as well as the isolation of an unusual lithium acylBpinOBpin compound as a key intermediate.
Three novel tetracationic bis‐triarylboranes with 3,4‐ethylenedioxythiophene (EDOT) linkers, and their neutral precursors, showed significant red‐shifted absorption and emission compared to their thiophene‐containing analogues, with one of the EDOT‐derivatives emitting in the NIR region. Only the EDOT‐linked trixylylborane tetracation was stable in aqueous solution, indicating that direct attachment of a thiophene or even 3‐methylthiophene to the boron atom is insufficient to provide hydrolytic stability in aqueous solution. Further comparative analysis of the EDOT‐linked trixylylborane tetracation and its bis‐thiophene analogue revealed efficient photo‐induced singlet oxygen production, with the consequent biological implications. Thus, both analogues bind strongly to ds‐DNA and BSA, very efficiently enter living human cells, accumulate in several different cytoplasmic organelles with no toxic effect but, under intense visible light irradiation, they exhibit almost instantaneous and very strong cytotoxic effects, presumably attributed to singlet oxygen production. Thus, both compounds are intriguing theranostic agents, whose intracellular and probably intra‐tissue location can be monitored by strong fluorescence, allowing switching on of the strong bioactivity by well‐focused visible light.
The present work focusses on the borylation of aryl halides. The first chapter presents a detailed review about previously reported nickel-catalyzed borylation reactions. The second chapter of the thesis describes, the borylation reaction of C–Cl bonds in aryl chlorides mediated by an NHC-stabilized nickel catalyst. The cyclohexyl substituted NHC Cy2Im was used to synthesize novel Cy2Im-stabilized nickel complexes [Ni2(Cy2Im)4(μ-(η2:η2)-COD)] 1, [Ni(Cy2Im)2(η2-C2H4)] 2, and [Ni(Cy2Im)2(η2-COE)] 3. An optimized procedure was developed using 5 mol% of the Ni-catalyst, 1.5 equivalents of the boron reagent B2pin2, and 1.5 equivalents of NaOAc as the base in methylcyclohexane at 100 °C. With these optimized conditions, it was shown that a variety of aryl chlorides, containing either electron-withdrawing or -donating groups, were converted to the corresponding aryl boronic esters in yields up to 99% (88% isolated) yield. Mechanistic investigations revealed that the C–Cl oxidative addition product [Ni(Cy2Im)2(Cl)(4-F3C-C6H4)] 11, which has been synthesized and isolated separately, also catalyzes the reaction. Thus, rapid oxidative addition of the C–Cl bond of the aryl chloride to [Ni2(Cy2Im)4(μ-(η2:η2)-COD)] 1 to yield trans-[Ni(Cy2Im)2(Cl)(Ar)] represents the first step in the catalytic cycle. The rate limiting step in this catalytic cycle is the transmetalation of boron to nickel forming trans-[Ni(Cy2Im)2(Bpin)(Ar)], which was not possible to isolate. The boryl transfer reagent is assumed to be the anionic adduct Na[B2pin2(OAc)]. A final reductive elimination step gives the desired borylated product Ar–Bpin and regenerates [Ni(Cy2Im)2].
In the next chapter the first effective C–Cl bond borylation of aryl chlorides using NHC-stabilized Cu(I)-complexes of the type [Cu(NHC)(Cl)] was developed. The known complexes [Cu(iPr2Im)(Cl)] 15, [Cu(Me2ImMe)(Cl)] 16, and [Cu(Cy2Im)(Cl)] 17, bearing the small alkyl substituted NHCs, were synthesized in good yields by the reaction of copper(I) chloride with the corresponding free NHC at low temperature (-78 °C) in THF. A range of catalysts, bases, solvents, and boron sources were screened to determine the scope and limitations of this reaction. [Cu(Cy2Im)(Cl)] 17 revealed a significantly higher catalytic activity than [Cu(iPr2Im)(Cl)] 15. KOtBu turned out to be the only efficient base for this borylation reaction. Besides methylcyclohexane, toluene was the only solvent that gave the borylated product in moderate yields of 53%. It was shown that a variety of electron-rich and electron-poor aryl chlorides can be converted to the corresponding aryl boronic esters in isolated yields of up to 80%. A mechanism was proposed, in which a Cu-boryl complex [Cu(L)(Bpin)] is formed in the initial step. This is followed by C–B bond formation via σ-bond metathesis with the aryl chloride forming the aryl boronic ester and [Cu(L)(Cl)]. The latter reacts with KOtBu to give [Cu(L)(OtBu)], which regenerates the copper boryl complex by reaction with B2pin2.
Chapter 4 describes studies directed towards the transition metal-free borylation of aryl halides using Lewis base adducts of diborane(4) compounds. A variety of novel pyridine and NHC adducts of boron compounds were synthesized. Adducts of the type pyridine·B2cat2 18-19 and NHC·B2(OR)4 20-23 were examined for their ability to transfer a boryl moiety to an aryl iodide. However, only Me2ImMe∙B2pin2 20 was found to be effective. The stoichiometric reaction of 20 with different substituted aryl iodides and bromides in benzene, at elevated temperatures, gave the desired aryl boronic esters in good yields. Interestingly, depending on the reaction temperature, C–C coupling between the aryl halide and the solvent (benzene), was detected leading to a side product which, together with observed hydrodehalogenation of the aryl halide, provided indications that the reaction might be radical in nature.
When the boryl transfer reaction based on Me2ImMe∙B2pin2 20 was followed by EPR spectroscopy, a signal (though very weak and ill-defined) was detected, which is suggestive of a mechanism involving a boron-based radical. In addition, the boronium cation [(Me2ImMe)2∙Bpin]+ 37 with iodide as the counterion was isolated from the reaction residue, indicating the fate of the second boryl moiety. A preliminary mechanism for the boryl transfer from 20 to aryl iodides was proposed, which involves an NHC–Bpin˙ radical as the key intermediate. Me2ImMe–Bpin˙ is formed by homolytic B–B bond cleavage of the bis-NHC adduct (Me2ImMe)2∙B2pin2, which is formed in situ in small amounts under the reaction conditions. Me2ImMe–Bpin˙ reacts with the aryl iodide to give the aryl boronic ester with recovery of aromaticity. In the same step, from the second equivalent of NHC–Bpin˙, an NHC-stabilized iodo-Bpin adduct is formed as an intermediate, which is further coordinated by another NHC, yielding [(Me2ImMe)2∙Bpin]+I- 37.
This dissertation describes the synthesis of an unsymmetrically-substituted triarylborane. This term describes a three-coordinate boron atom that is bound to three different aromatic systems, namely 2,6-dimethylphenyl, mesityl, and 4-(N,N-dimethylamino)-2,6-dimethylphenyl. It is also demonstrated that the amine functionality can be converted with methyl triflate into an ammonium moiety. The investigation of photophysical and electrochemical properties of this compound in comparison with the non-aminated and di-aminated analogues of the triarylborane is described besides other investigations of e. g. singlet oxygen sensitization, rotational barriers, and fundamental DFT calculations. Based on these investigations, selectively mono-, bis- and tris-dimethylamino- and trimethylammonium-substituted bis-triarylborane bithiophene chromophores were synthesized and their photophysical, and electrochemical properties were investigated together with the water solubility and singlet oxygen sensitizing efficiency of the cationic compounds Cat1+, Cat2+, Cat(i)2+, and Cat3+. Comparing these properties with the results obtained for the mono-triarylboranes reveals a large influence of the bridging unit on the investigated properties of the bis-triarylboranes. In addition, the interaction of the cationic bis-triarylboranes with different polynucleotides were investigated in buffered solutions as well as the ability of these selectively charged compounds to enter and localize within organelles of human lung carcinoma and normal lung cells. All these investigations demonstrate that the number of charges and their distribution influences the interactions and staining properties as well as most of the other properties investigated.
In addition, preliminary investigations on H2O2-cleavable boronate esters in the presence of stochiometric amounts of H2O2 are described for three different aryl boronate esters.
Alkylboronates play an important role in synthetic chemistry, materials science and drug discovery. They are easy to handle due to their good air and moisture stability, and can be readily employed to form carbon–carbon and carbon–heteroatom bonds and can be converted to various functional groups under mild reaction conditions. Compared with conventional groups, such as aryl (pseudo)halides or alcohols, organosulfur compounds represent an alternative and complimentary substitute in coupling reactions. The construction of C–B bond from C–SO bond of aryl sulfoxide is presented in Chapter 2. The selective cleavage of either alkyl(C)-sulfonyl or aryl(C)-sulfonyl bonds of an aryl alkyl sulfone via Cu-free or Cu-mediated processes generates the corresponding boronate esters, which are presented in Chapter 3 and Chapter 4. 1,2-Bis(boronate esters) are emerging as important synthetic intermediates for preparing 1,2-difunctional compounds. In addition, the boryl moieties in different environments in a 1,2-bis(boronate ester) can be differentiated and converted selectively, allowing the synthesis of a wide variety of complex molecules. A direct and selective diboration of C–X and C–O bonds for the preparation of 1,2-bis(boronate esters) is presented in Chapter 5.
Persistent room temperature phosphorescent (RTP) luminophores have gained remarkable interest recently for a number of applications in security printing, OLEDs, optical storage, time-gated biological imaging and oxygen sensors. We report the first persistent RTP with lifetimes up to 0.5 s from simple triarylboranes which have no lone pairs. We also have prepared 3 isomeric (o, m, p-bromophenyl)-bis(2,6-dimethylphenyl)boranes. Among the 3 isomers (o-, m- and p-BrTAB) synthesized, the ortho-one is the only one which shows dual phosphorescence, with a short lifetime of 0.8 ms and a long lifetime of 234 ms in the crystalline state at room temperature. At last, we checked the RTP properties from the boric acid. We found that the pure boric acid does not show RTP in the solid state.
The 1‐methyl‐3‐(tricyanoborane)imidazolin‐2‐ylidenate anion (2) was obtained in high yield by deprotonation of the B(CN)3‐methylimidazole adduct 1. Regarding charge and stereo‐electronic properties, anion 2 closes the gap between well‐known neutral NHCs and the ditopic dianionic NHC, the 1,3‐bis(tricyanoborane)imidazolin‐2‐ylidenate dianion (IIb). The influence of the number of N‐bonded tricyanoborane moieties on the σ‐donating and π‐accepting properties of NHCs was assessed by quantum chemical calculations and verified by experimental data on 2, IIb, and 1,3‐dimethylimidazolin‐2‐ylidene (IMe, IIa). Therefore NHC 2, which acts as a ditopic ligand via the carbene center and the cyano groups, was reacted with alkyl iodides, selenium, and [Ni(CO)\(_{4}\)] yielding alkylated imidazoles 3 and 4, the anionic selenium adduct 5, and the anionic nickel tricarbonyl complex 8, respectively. The results of this study prove that charge, number of coordination sites, buried volume (%V\(_{bur}\)) and σ‐donor and π‐acceptor abilities of NHCs can be effectively fine‐tuned via the number of tricyanoborane substituents.