Refine
Has Fulltext
- yes (15) (remove)
Is part of the Bibliography
- yes (15)
Year of publication
Document Type
- Doctoral Thesis (15) (remove)
Keywords
- Übergangsmetall (15) (remove)
Institute
Unter Ausnutzung der Reaktivität von Borylanionen wurden neuartige Übergangsmetallboridokomplexe synthetisiert, bei denen ein "nacktes" Boratom als Ligand für bis zu vier Übergangsmetalle vorliegt. Strukturelle und bindungstheoretische Eigenschaften der Boridokomplexe wurden mit gängigen metallorganischen Analysemethoden sowie mit DFT-Methoden untersucht. Dabei zeigte sich, dass die erhaltenen Tetrametalloboridokomplexe eine planare Koordinationsgeometrie um das Borzentrum aufweisen und damit ein Äquivalent zu anti van't Hoff/Le Bel-Verbindungen des Kohlenstoffs darstellen.
Die vorliegende Dissertation beschäftigt sich mit der Darstellung Übergangsmetall-substitutierter Silane und Untersuchungen zum Einfluss verschiedener Übergangsmetallsubstituenten auf die chemischen und spektroskopischen Eigenschaften dieser Klasse von Siliciumverbindungen. Dabei steht insbesondere die Synthese mehrfach metallierter Silanole und Siloxane im Vordergrund. A – Halogenierte Bis(metallo)silane: Durch schrittweise Umsetzung von HSiCl3 oder HSiCl2Me mit den Übergangsmetallaten Na[Fe(CO)2Cp] oder Li[W(CO)2PMe3Cp] wurden verschiedene bismetalliete Silane [LnM]2SiRCl (R = H, Me) aufgebaut. Durch weitere Derivatisierung konnten u.a. die Bis(ferrio)silane [Cp(OC)2Fe]2SiX2 (X = F, Cl, Br, I) dargestellt und z. T. durch Röntgenstrukturen charakterisiert werden. Aus diesen Verbindungen lassen sich durch photochemische CO-Eliminierung die µ2-silylenverbrückten Komplexe [Cp(OC)Fe]2(µ2-CO)(µ2-SiRHal) (R = Me, Halogen) gewinnen. B – Bis(metallo)silanole und –siloxane: Die unter A hergestellten Verbindungen dienten als Vorstufen zur Synthese der neuen Bis(ferrio)silanole [Cp(OC)2Fe]2SiX(OH) (X = H, Cl, OH) und des hetero-bismetallierten Silanols [Cp(OC)2Fe][Cp(OC)2PMe3]SiMe(OH). Dabei konnte lediglich [Cp(OC)2Fe]2SiH(OH) durch Hydrolyse des entsprechenden halogenierten Bis(ferrio)silans hergestellt werden. Alle anderen Bis(metallo)silanole wurden durch Oxygenierung der jeweiligen SiH-funktionellen Vorstufen mit Hilfe von Dimethyldioxiran synthetisiert. Alle Bis(metallo)silanole sind stabil bezüglich Eigenkondensation, lassen sich aber mit ClSiMe2H in die entsprechenden Siloxane [LnM]2SiR(OSiMe2H) umwandeln. C – Co2(CO)2 assistierte Hydrolyse von Silanen: Die Umsetzung verschiedener Si-H-funktioneller Silane R3Si-H mit Dicobaltoctacarbonyl führt unter H2-Entwicklung zu Cobaltio-Silanen R3Si-Co(CO)4. Diese besitzen eine extrem labile Si-CoBindung, welche sich durch zahlreiche protische Reagenzien spalten läßt. Es wurden u. a die Cobaltio-Silane Me3SiOSiMe2-Co(CO4), Me(OMe)2Si-Co(CO)4 und Ph2SiCo2(CO)7 generiert und durch Hydrolyse in verschiedene Silanole oder Siloxane überführt. Eine direkte hydrolytische SiH/SiOH-Umwandlung ist auch in Gegenwart katalytischer Mengen Co2(CO)8 möglich und wurde u.a. zur Darstellung des Bis(ferrio)siloxanols [Cp(OC)2Fe]2Si(OH)(OSiMe2H) genutzt. D – DFT-Berechnungen an Übergangsmetallverbindungen von Silicium und Phosphor: Die Strukturen der dimeren Siloxygallane (RH2SiOGaMe2)2 (R = H, tBu) wurden theoretisch berechnet. Man findet eine starke Abhängigkeit der Geometrie des zentralen viergliedrigen Ga-O-Ga-O-Ringes von Größe und relativen Position der exocyclischen Substituenten R. Struktur- und NBO-Analyse des cyclischen Metallasiloxans Cp(OC)(H)Fe[SiMe2O]2SiMe2 belegen den Einfluß des Cp(OC)(H)Fe-Fragmentes auf Struktur und Bindungsverhältnisse des Heterosiloxan Ringes. Relative thermodynamische Stabilitäten wurden für die diastereomeren Formen des kationischen Phosphankomplexe lk/ul-Cp*(OC)2Fe-P(Ph)(H)[CH(CO2Me)CH2CO2Me]+ und des µ2-silylenbrückten Eisenkomplexes cis/trans-[Cp(OC)Fe]2(µ2-CO)(µ2-SiH2) theoretisch berechnet.
Im Rahmen dieser Arbeit ist es gelungen, neue Boryl- und Borylenkomplexe von Palladium und Platin darzustellen. Die vollständige Charakterisierung dieser Verbindungen ermöglicht ees, Rückschlüsse auf die Natur der Metall-Bor-Bindung zu ziehen und trägt so zu einem besseren Verständnis dieser Substanzklasse bei. Überdies konnten bisher unbekoannte Koordinationsmodi für den Borliganden nachgewiesen werden. ...
Die Klasse der Iminoborylkomplexe wurde systematisch untersucht und bezüglich der metallgebundenen Coliganden und des sterischen Anspruchs der Iminofunktion variiert. Die drastische Verringerung des Raumbedarfs der Iminofunktion ermöglichte im Verlauf der Synthese von trans-[(Cy3P)2BrPt(B≡NiBu)] erstmals, das zuvor lediglich postulierte Borylintermediat NMR-spektroskopisch zu beobachten. Darüber hinaus lieferten die NMR-Spektren Hinweise auf das Vorliegen einer Gleichgewichtsreaktion, bei der es sich eventuell um eine Cyclodimerisierung handeln könnte. Außerdem führte der geringere sterische Schutz der B≡N-Dreifachbindung zu einer signifikant erhöhten Reaktivität, welche die Darstellung des ungewöhnlichen zweikernigen Komplexes [1,4-{trans-(Cy3P)2BrPt(B{NHiBu}NH)}2C6H4] ermöglichte. Der beachtliche stabilisierende Einfluss des Platinfragments auf die Iminoborylfunktion spiegelt sich in den Ergebnissen ausführlicher Reaktivitätsstudien wider. So stellt beispielsweise in trans-[(Cy3P)2BrPt(B≡NSiMe3)] nicht das niedervalente Boratom das elektrophile Zentrum dar. Stattdessen reagierte Natrium(phenylacetylid) unter Substitution des Bromidliganden und Bildung von trans-[(Cy3P)2(PhC≡C)BrPt(B≡NSiMe3)]. Die 1,2-Addition dipolarer Substrate erfolgte in allen Fällen entsprechend der Polarität und hochgradig trans-selektiv. Auf diese Weise konnten im Rahmen der beschriebenen Arbeit durch Hydroborierung der B≡N-Dreifachbindung auch die ersten Vertreter von wasserstoffsubstituierten Borylkomplexen ohne zusätzliche Stabilisierung durch eine Lewis-Base realisiert werden. Außerdem zeigte sich bezüglich der Addition protonenaktiver Reagenzien eine Abhängigkeit von der Brønsted-Acidität der Substrate und dem sterischen Anspruch beider Reaktionspartner. Trans-[(Cy3P)2BrPt(B≡NSiMe3)] reagierte erst unter sauren Bedingungen mit Wasser unter 1,2-Addition an die Iminoborylfunktion und bildet mit Aluminiumchlorid das Lewis-Addukt trans-[(Cy3P)2BrPt{BN(SiMe3)AlCl3}], welches den ersten neutralen Borylenkomplex eines Gruppe 10-Metalls darstellt. Des Weiteren gelang es, die bewährte Strategie zum Aufbau reaktiver Bor−Element-Dreifachbindungen in der Koordinationssphäre von Übergangsmetallen zur Generierung der ersten stabilen B≡O-Dreifachbindung zu nutzen. Der durch reversible Eliminierung von Trimethylbromsilan gebildete neutrale Oxoborylkomplex trans-[(Cy3P)2BrPt(B≡O)] erwies sich ebenfalls als erstaunlich stabil. Die Infrarotdaten weisen auf eine ausgesprochen starke Kraftkonstante der B≡O-Bindung hin. In Übereinstimmung hiermit bestätigten quantenchemische Untersuchungen das Vorliegen zweier orthogonaler π-Bindungen zwischen diesen Elementen. Die konstitutionelle Zusammensetzung des Oxoborylkomplexes konnte darüber hinaus auch durch die Ergebnisse von Röntgenbeugungsexperimenten belegt werden. Aufgrund massiver Fehlordnung beider anionischer und annähernd isosterer Liganden konnten die strukturellen Parameter allerdings nicht verlässlich bestimmt werden. Dieses Problem konnte jedoch durch Substitution des trans-ständigen Bromidliganden überwunden werden. Die Reaktion mit Tetrabutylammoniumthiophenolat verlief selektiv unter Metathese der Pt−Br-Bindung, wodurch die Oxoboryleinheit unangetastet blieb. Das Reaktionsprodukt trans-[(Cy3P)2(PhS)Pt(B≡O)] zeigt die bis dato kürzeste B−O-Bindung. Die formale Bindungsverkürzung im Vergleich zu einer Doppelbindung ist hierbei nur etwas geringer als für die entsprechenden Kohlenstoffanaloga. Auch die trans-ständigen Coliganden tragen essentiell zur Stabilisierung der Oxoborylfunktion bei und können demnach nicht nur als Zuschauerliganden betrachtet werden. So war die Abstraktion des Bromids von trans-[(Cy3P)2BrPt(B≡O)] mit der sofortigen Cyclodimerisierung des kationischen Komplexes unter Bildung von trans,trans-[(Cy3P)2Pt(BO2B)Pt(PCy3)2][Al(Pftb)4]2 verbunden, in dem die Verbrückung zweier Metallzentren über einen Dioxodiboretandiylliganden erstmals experimentell verwirklicht werden konnte. Durch die Gegenwart eines Überschusses an Acetonitril konnte die durch Bromidabstraktion erhaltene monomere, kationische Spezies stabilisiert werden. Strukturelle und vor allem infrarotspektroskopische Eigenschaften des ionischen Reaktionsprodukts trans-[(Cy3P)2(MeCN)Pt(B≡O)][BArf4] zeigen hierbei, dass mit der Einbringung einer positiven Ladung in den Komplex eine leichte Verstärkung der B≡O-Bindung einhergeht. Eine geringe Schwächung dieser Bindung wurde hingegen beispielsweise für das Addukt trans-[(Cy3P)2BrPt(B≡OBPf3)] festgestellt. So führte die Koordination des Lewis-aciden Borans BPf3 an das Sauerstoffatom des Oxoborylkomplexes zu einer erhöhten π-Rückbindung. Diese Ergebnisse betonen nochmals die nahe Verwandtschaft der neuen Klasse der Oxoborylkomplexe mit den gut untersuchten und wertvollen Carbonylkomplexen und vermitteln darüber hinaus einen Eindruck der vielfältigen Reaktivität dieser Verbindungen.
Bisdiynes undergo Pd(0)-catalyzed cyclization, forming azulene and naphthalene products. When dibenzylideneacetone is present in the reaction, it undergoes a [2+2+2] cyclization with the bisdiyne, forming cyclohexadiene derivatives. Ni(0) catalyzes the [2+2+2] cycloaddition of diynes with tolanes towards alkynylated o-terphenyl derivatives. The D-A substituted products are solvatochromic, fluorescent dyes with high quantum yields and short lifetimes. Bis-triarylborane tetrayne dyes were synthesized in both neutral and tetracationic forms, as potential DNA/RNA sensor. Both molecules are weakly fluorescent in solution and exhibit characteristic alkyne absorptions in the Raman spectra. Tributyl phosphine catalyzes the trans-hydroboration of 1,3-butadiynes with HBpin. We confirmed experimentally via NMR and HRMS experiments, that phosphine attack on the diyne is a key step in the catalytic cycle.
In this work we utilized Density Functional Theory to calculate EPR parameters and spin-density distributions of several transition metal complexes. To demonstrate the performance of our theoretical approach several validation studies were performed (Chapters 3-5). In contrast, the last three chapters of the thesis deal with specific chemical problems regarding several classes of biologically relevant transition metal complexes.
Organoboron compounds, such as benzyl-, allyl-, allenyl-, vinyl-, and 2-boryl allyl-boronates, have been synthesized via metal-catalyzed borylations of sp3 C-O and C-H bonds. Thus, Cu-catalyzed borylations of alcohols and their derivatives provide benzyl-, allyl-, allenyl-, vinyl-, and 2-boryl allyl-boronates via nucleophilic substitution. The employment of Ti(OiPr)4 turns the OH moiety into a good leaving group (‘OTi’). The products of Pd-catalyzed oxidative borylations of allylic C-H bonds of alkenes were isolated and purified, and their application in the one-pot synthesis of stereodefined homoallyl alcohols was also investigated. Chapter 2 presents a copper-catalyzed synthesis of benzyl-, allyl-, and allenyl-boronates from benzylic, allylic, and propargylic alcohols, respectively, employing a commercially available catalyst precursor, [Cu(CH3CN)4]2+[BF4-]2, and Xantphos as the ligand. The borylation of benzylic alcohols was carried out at 100 oC with 5-10 mol % [Cu(CH3CN)4]2+[BF4-]2, which afforded benzylic boronates in 32%-95% yields. With 10 mol % [Cu(CH3CN)4]2+[BF4-]2, allylic boronates were provided in 53%-89% yields from the borylation of allylic alcohols at 60 or 100 oC. Secondary allylboronates were prepared in 72%-84% yields from the borylation of primary allylic alcohols, which also suggests that a nucleophilic substitution pathway is involved in this reaction. Allenylboronates were also synthesized in 72%-89% yields from the borylation of propargylic alcohols at 40 or 60 oC. This methodology can be extended to borylation of benzylic and allylic acetates. This protocol exhibits broad reaction scope (40 examples) and high efficiency (up to 95% yield) under mild conditions, including the preparation of secondary allylic boronates. Preliminary mechanistic studies suggest that nucleophilic substitution is involved in this reaction. Chapter 3 reports an efficient methodology for the synthesis of vinyl-, allyl-, and (E)-2-boryl allylboronates from propargylic alcohols via copper-catalyzed borylation reactions under mild conditions. In the presence of a commercially available catalyst precursor (Cu(OAc)2 or Cu(acac)2) and ligand (Xantphos), the reaction affords the desired products in up to 92% yield with a broad substrate scope (43 examples). Vinylboronates were synthesized in 50%-83% yields via Cu-catalyzed hydroboration of mono-substituted propargylic alcohols. With 1,1-disubstituted propargylic alcohols as the starting materials and Cu(OAc)2 as the catalyst precursor, a variety of allylboronates were synthesized in 44%-83% yields. The (E)-2-boryl allylboronates were synthesized in 54%-92% yields via the Cu-catalyzed diboration of propargylic alcohols. The stereoselectivity is different from the Pd(dba)2-catalyzed diboration of allenes that provided (Z)-2-boryl allylboronates predominantly. The isolation of an allenyl boronate as the reaction intermediate suggests that an SN2’-type reaction, followed by borylcupration, is involved in the mechanism of the diboration of propargylic alcohols. In chapter 4, a Pd-catalyzed allylic C-H borylation of alkenes is reported. The transformation exhibits high regioselectivity with a variety of linear alkenes, employing a Pd-pincer complex as the catalyst precursor, and the allylic boronate products were isolated and purified. This protocol can also be extended to one-pot carbonyl allylation reactions to provide homoallyl alcohols efficiently. An interesting mechanistic feature is that the reaction proceeds via a Pd(II)/Pd(IV) catalytic cycle. Formation of the Pd(IV) intermediate occurs by a unique combination of an NCNpincer complex and application of F-TEDA-BF4 as the oxidant. An important novelty of the present C-H borylation reaction is that all allyl-Bpin products can be isolated with usually high yields. This is probably a consequence of the application of the NCN-pincer complex as catalyst, which selectively catalyzes C-B bond formation avoiding subsequent C-B bond cleavage based side-reactions
Project Borylene
A new borylene ligand ({BN(SiMe\(_3\))(t-Bu)}) has been successfully synthesized bound in a terminal manner to base metal scaffolds of the type [M(CO)\(_5\)] (M = Cr, Mo, and W), yielding complexes [(OC)\(_5\)Cr{BN(SiMe\(_3\))(t-Bu)}] (19), [(OC)\(_5\)Mo{BN(SiMe\(_3\))(t- Bu)}] (20), and [(OC)\(_5\)W{BN(SiMe\(_3\))(t-Bu)}] (21) (Figure 5-1). Synthesis of complexes 19, 20, and 21 was accomplished by double salt elimination reactions of Na\(_2\)[M(CO)\(_5\)] (M = Cr (11), Mo (1), and W (12)) with the dihaloborane Br\(_2\)BN(SiMe\(_3\))(t-Bu) (18). This new “first generation” unsymmetrical borylene ligand is closely akin to the bis(trimethylsilyl)aminoborylene ligand and has been shown to display similar structural characteristics and reactivity. The unsymmetrical borylene ligand {BN((SiMe\(_3\))(t-Bu)} does display some individual characteristics of note and has experimentally been shown to undergo photolytic transfer to transition metal scaffolds in a more rapid manner, and appears to be a more reactive borylene ligand, than the previously published symmetrical {BN(SiMe\(_3\))\(_2\)} ligand, based on NMR and IR spectroscopic evidence.
Photolytic transfer reactions with this new borylene ligand ({BN((SiMe\(_3\))(t-Bu)}) were conducted with other metal scaffolds, resulting in either complete borylene transfer or partial transfer to form bridging borylene ligand interactions between the two transition metals. The unsymmetrical ligand’s coordination to early transition metals (up to Group 6) indicates a preference for a terminal coordination motif while bound to these highly Lewis acidic species. The ligand appears to form more energetically stable bridging coordination modes when bound to transition metals with high Lewis basicity (beyond Group 9) and has been witnessed to transfer to transition metal scaffolds in a terminal manner and subsequently rearrange in order to achieve a more energetically stable bridging final state.
Figure 5-2 lists the four different transfer reactions conducted between the chromium borylene species [(OC)\(_5\)Cr{BN(SiMe\(_3\))(t-Bu)}] (19) and the transition metal complexes [(η\(^5\)-C\(_5\)H\(_5\))V(CO)\(_4\)] (51), [(η\(^5\)-C\(_5\)Me\(_5\))Ir(CO)\(_2\)] (56), [(η\(^5\)-C\(_5\)H\(_4\)Me)Co(CO)\(_2\)] (59), and [{(η\(^5\)-C\(_5\)H\(_5\))Ni}\(_2\){μ-(CO)\(_2\)}] (53). These reactions successfully yielded the new “second generation” borylene complexes [(η\(^5\)-C\(_5\)H\(_5\))(OC)\(_3\)V{BN(SiMe\(_3\))(t-Bu)}] (55), [(η\(^5\)-C\(_5\)Me\(_5\))Ir{BN(SiMe\(_3\))(t-Bu)}\(_2\)] (58), [{(η\(^5\)-C\(_5\)H\(_4\)Me)Co}\(_2\)(μ-CO)\(_2\){μ- BN(SiMe\(_3\))(t-Bu)}] (61), and [{(η\(^5\)-C\(_5\)H\(_5\))Ni}\(_2\)(μ-CO){μ-BN(SiMe\(_3\))(t-Bu)}] (62), respectively.
Analysis of the accumulated data for all of the terminal borylene species discussed in this section, particularly bond distances, infrared spectroscopy, and \(^{11}\)B{\(^1\)H} NMR spectroscopic data, has been performed, and a trend in the data has led to the following conclusions:
[1] NMR spectroscopic data for the \(^{11}\)B{\(^1\)H} boron and \(^{13}\)C{\(^1\)H} carbonyl environments of the first generation borylene species ([(OC)\(_5\)M{BN(SiMe\(_3\))(t-Bu)}] (M = Cr (19), Mo (20), and W (21))) all show progressive up-field shifting as the Group 6 metal becomes heavier (Cr (19) to Mo (20) to W (21)), indicating maximum deshielding for these nuclei in the [(OC)\(_5\)Cr{BN(SiMe\(_3\))(t-Bu)}] (19) complex.
[2] The boron-metal-trans-carbon (B-M-C\(_{trans}\)) axes of the first generation borylene complexes [(OC)\(_5\)M{BN(SiMe\(_3\))(t-Bu)}] (M = Mo (20), and W (21)) are not completely linear, preventing direct IR spectroscopic comparison. The chromium analog [(OC)\(_5\)Cr{BN(SiMe\(_3\))(t-Bu)}] (19), however, is essentially linear and displays the expected three carbonyl IR stretching frequencies, all at higher energy than those of the chromium bis(trimethylsilyl)aminoborylene complex [(OC)\(_5\)Cr{BN(SiMe\(_3\))\(_2\)}] (13), indicating that the ({BN(SiMe\(_3\))(t-Bu)}) ligand is either a stronger σ-donor or a poorer π-acceptor compared to the chromium metal center.
[3] In transfer reactions, the {BN(SiMe\(_3\))(t-Bu)} fragment appears to be more stable as a terminal ligand when bound to more Lewis acidic first row transition metals and appears to prefer coordination in a bridging motif when coordinated to more Lewis basic first row transition metals.
Project Borirene
The synthesis of the first platinum bis(borirene) complexes are presented along with findings from structural and electronic examination of the role of platinum in allowing increased coplanarity and conjugation of twin borirene systems. This series of trans-platinum-linked bis(borirene) complexes (119/120, 122/123, and 125/126) all show coplanarity in the twin ring systems and stand as the first verified structural representations of two coplanar borirene systems across a linking unit. The role of a platinum atom in mediating communication between chromophoric ligands can be generalized by an expected bathochromic (red) shift in the absorption spectrum due to an increase in the electronic delocalization between the formerly independent aromatic systems when compared to the platinum mono-σ-borirenyl systems. The trans-platinum bis(borirene) scaffold serves as a simplified monomeric system that allows not only study of the effects of transition metals in mitigating electronic conjugation, but also the tunability of the overall photophysical profile of the system by exocyclic augmentation of the three-membered aromatic ring.
A series of trans-platinum bis(alkynyl) complexes were prepared (Figure 5-3) to serve as stable platforms to transfer terminal borylene ligands {BN(SiMe\(_3\))\(_2\)} onto 95, 102, 106, and 63. Mixing of cis-[PtCl\(_2\)(PEt\(_3\))\(_2\)] (93) with two equivalents of corresponding alkynes in diethylamine solutions successfully yielded trans-[Pt(C≡C-Ph)\(_2\)(PEt\(_3\))\(_2\)] (95), trans-[Pt(C≡C-p-C\(_6\)H\(_4\)OMe)\(_2\)(PEt\(_3\))\(_2\)] (102), trans-[Pt(C≡C-p-C\(_6\)H\(_4\)CF\(_3\))\(_2\)(PEt\(_3\))\(_2\)](106), and trans-[Pt(C≡C-9-C\(_{14}\)H\(_9\))\(_2\)(PEt\(_3\))\(_2\)] (63) through salt elimination reactions.
Three of the trans-platinum bis(alkynyl) complexes (95, 102, and 106) successfully yielded trans-platinum bis(borirenyl) complexes 119/120, 122/123, and 125/126 through photolytic transfer of two equivalents of the terminal borylene ligand {BN(SiMe\(_3\))\(_2\)} from [(OC)\(_5\)Cr{BN(SiMe\(_3\))\(_2\)}] (13) (Figure 5-4). Attempted borylene transfer reactions to the trans-platinum bis(alkynyl) complex trans-[Pt(C≡C-9-C\(_{14}\)H\(_9\))\(_2\)(PEt\(_3\))\(_2\)] (63) failed due to the complex’s photoinstability. Although a host of other variants of platinum alkynyl species were prepared and attempted, these three were the only ones that successfully yielded trans-platinum bis(borirenyl) units. Attempts were also made to create a cis variant for direct UV-vis comparison to the trans-platinum bis(borirenyl) variants, however, these attempts were also not successful. Gladysz-type platinum end-capped alkynyl species were also synthesized to serve as transfer platforms for borirene synthesis in sequential order, however, these species were also shown to not be photolytically stable.
A host of new monoborirenes: Ph-(μ-{BN(SiMe\(_3\))(t-Bu)}C=C)-Ph (148), trans- [PtCl{(μ-{BN(SiMe\(_3\))(t-Bu)}C=C)-Ph}(PEt\(_3\))\(_2\)] (149), and [(η\(^5\)-C\(_5\)Me\(_5\))(OC)\(_2\)Fe(μ- {BN(SiMe\(_3\))(t-Bu)}C=C)Ph] (150) were synthesized by photo- and thermolytic transfer of the unsymmetrical {BN(SiMe\(_3\))(t-Bu)} ligand from the complexes [(OC)\(_5\)M{BN(SiMe\(_3\))(t-Bu)}] (M = Cr (19), Mo (20), and W (21)) to organic and organometallic alkynyl species to verify that the borylene complexes all display similar reactivity to the symmetrical terminal borylenes of the type [(OC)\(_5\)M{BN(SiMe\(_3\))\(_2\)}] (M = Cr (13), Mo (14), and W (15)). These monoborirenes are all found to be oils when in their pure states and X-ray structural determination was impossible for these species.
Project Boratabenzene
The bis(boratabenzene) complex [{(η\(^5\)-C\(_5\)H\(_5\))Co}\(_2\){μ:η\(^6\),η\(^6\)-(BC\(_5\)H\(_5\))\(_2\)}] (189) was successfully prepared by treatment of tetrabromodiborane (65) with six equivalents of cobaltocene (176) in a unique reaction that utilized cobaltocene as both a reagent and reductant (Figure 5-5). The bimetallic transition metal complex features a new bridging bis(boratabenzene) ligand linked through a boron-boron single bond that can manifest delocalization of electron density by providing an accessible LUMO orbital for π-communication between the cobalt centers and heteroaromatic rings.
This dianionic diboron ligand was shown to facilitate electronic coupling between the cobalt metal sites, as evidenced by the potential separations between successive single-electron redox events in the cyclic voltammogram. Four formal redox potentials for complex 189 were found: E\(_{1/2}\)(1) = −0.84 V, E\(_{1/2}\)(2) = −0.94 V, E\(_{1/2}\)(3) = −2.09 V, and E\(_{1/2}\)(4) = −2.36 V (relative to the Fc/Fc+ couple) (Figure 5-6). These potentials correlate to two closely-spaced oxidation waves and two well-resolved reduction waves ([(189)]\(^{0/+1}\), [(189)]\(^{+1/+2}\), [(189)]\(^{0/–1}\), and [(189)]\(^{–1/–2}\) redox couples, respectively). The extent of metal-metal communication was found to be relative to the charge of the metal atoms, with the negative charge being more efficiently delocalized across the bis(boratabenzene) unit (class II Robin-Day system). Magnetic studies indicate that the Co(II) ions are weakly antiferromagnetically coupled across the B-B bridge.
While reduction of the bis(boratabenzene) system resulted in decomposition of the complex, oxidation of the system by one- and two-electron steps resulted in isolable stable monocationic (194) and dicationic (195) forms of the bis(boratabenzene) complex (Figure 5-7). Study of these systems verified the results of the cyclic voltammetry studies performed on the neutral species. These species are unfortunately not stable in acetonitrile or nitromethane solutions, which until this point are the only solvents that have been observed to dissolve the cationic species. Unfortunately, this instability in solution complicates reactivity studies of these cationic complexes.
Finally, reactivity studies were performed on the neutral bis(boratabenzene) complex 189 in which the compound was tested for: (A) cleavage of the boratabenzene (cyclo-BC\(_5\)H\(_5\)) ring from the cobalt center, and (B) oxidative addition of the B-B bond to a transition metal scaffold to attempt synthesis of the first ever L\(_x\)M-η\(^1\)-(BC\(_5\)H\(_5\)) complex. Both of these reactivity studies, however, proved unsuccessful and typically witnessed decomposition of the bis(boratabenzene) complex or no reactivity. After repeated attempts of these reactions, no oxidative addition of the bis(boratabenzene) system could be confirmed.
Durch Untersuchungen zur Reaktivität von Boryl- und Boridverbindungen konnten deren Bindungssituationen aufgeklärt und neuartige Koordinationsmotive von Übergangsmetall-Bor-Verbindungen erhalten werden. Die erhaltenen Verbindungen wurden mittels NMR-Spektroskopie, IR-Spektroskopie, Elementaranalyse und Röntgendiffraktometrie untersucht und zusätzlich wurden DFT-Rechnungen angefertigt.
An verschieden substituierten Eisenborylkomplexen wurden Reaktivitätsuntersuchungen gegenüber Halogenidabstraktionsmitteln und Reduktionsmitteln durchgeführt und im Falle der Boridkomplexe wurden Verbindungen mit bis dato unbekanntem Strukturmotiv erhalten.
Im Rahmen der vorliegenden Arbeit wurden Untersuchungen zum Magnetismus und der elektronischen Struktur deponierter Cluster der 3d-Übergangsmetalle Fe, Co und Ni durchgeführt. Dabei zeigte sich, dass die Deposition der Cluster in Argon-Dünnfilme nicht nur zur fragmentationsfreien Probenpräparation genutzt werden kann, sondern auch die Untersuchung der Cluster in einer Umgebung mit geringer Wechselwirkung erlaubt. Die Beobachtung des atomaren Co-Multipletts sowie die Übereinstimmung der, mittels XMCD bestimmten, magnetischen Gesamtmomente von Fe- und Co-Clustern mit Gasphasenexperimenten zeigen auf, dass unter stabil gewählten Bedingungen die intrinsischen magnetischen Clustereigenschaften tatsächlich experimentell zugänglich sind. Die synchrotroninduzierte Mobilität von Clustern und Argon manifestiert sich in der Veränderung der Form der Absorptions- und Photoemissionslinien sowie in der zunehmenden Verminderung der gemessenen Magnetisierung. Neben den geeigneten Experimentierbedingungen ist zur Bestimmung der magnetischen Momente die Anwendbarkeit der XMCD-Summenregeln auf die Spektroskopie an Clustern notwendig. Besondere Beachtung verdient dabei auf Grund der reduzierten Symmetrie in Clustern der "magnetische Dipolterm" zur Spin-Summenregel. Der Vergleich des spektroskopisch ermittelten Gesamtmoments mit demjenigen, welches aus superparamagnetischen Magnetisierungskurven bestimmt wurde, erlaubt es, für seinen Beitrag bei Co-Clustern eine obere Schranke von 10% anzugeben. Erwartungsgemäß weisen die Spinmomente von Fe- und Co-Clustern gemessen am Festkörper deutlich erhöhte Werte auf, allerdings reichen sie nicht an die mittels Stern-Gerlach-Ablenkung bestimmten magnetischen Gesamtmomente der Cluster heran. Die elektronische Struktur von Nickelclustern erweist sich als sehr empfindlich gegen Wechselwirkungen mit Fremdatomen, so dass die magnetischen Resultate aus der Gasphase nicht nachvollzogen werden können. Allen Clustern in der Argonumgebung ist jedoch eine starke Erhöhung des bahnartigen Anteils am Gesamtmoment, generell auf mehr als 20% gemein. Damit kann nachgewiesen werden, dass die bestehende Diskrepanz zwischen berechneten Spinmomenten und experimentell bestimmten Gesamtmomenten in der Tat auf große Bahnmomente zurückzuführen ist. Dies gilt um so mehr, als die in dieser Arbeit bestimmten magnetischen Gesamtmomente an Fe- und Co-Clustern in guter Übereinstimmung mit Stern-Gerlach-Experimenten stehen. Die Wechselwirkung der Cluster mit der Oberfläche des Graphits führt bereits in den XAS-Absorptionsprofilen der L-Kanten zu sichtbaren Veränderungen in Form und energetischer Position der Absorptionsresonanzen. Alle untersuchten Cluster erfahren gleichzeitig eine starke Reduktion ihrer magnetischen Momente, häufig bis unter die Nachweisgrenze. Unter diesen Umständen ist es durchaus angebracht, von einer starken Cluster-Substrat-Wechselwirkung auszugehen. Dieser Befund wird durch die mittels Photoelektronenspektroskopie erzielten Ergebnisse untermauert. Veränderungen durch das "Einschalten" der Substratwechselwirkung sind sowohl in den Rumpfniveau- als auch den Valenzbandspektren zu erkennen. Charakteristisch für die ausführlicher untersuchten Ni-Cluster ist die Ausbildung einer, mit dem Graphitsubstrat hybridisierten, Elektronenstruktur mit reduzierter Zustandsdichte in der Umgebung des Ferminiveaus. Eine solche Konfiguration begünstigt die Ausbildung von "low-spin" - Zuständen, wie sie in den XMCD-Experimenten bei vorhandener Wechselwirkung mit dem Graphit gefunden werden. Die starke Kopplung der elektronischen Zustände von Cluster und Substrat äußert sich ebenfalls in dem Verlust des Fano-Resonanzverhaltens in der resonanten Photoemission an der 3p-Absorptionsschwelle. Das Fehlen der analogen Beobachtung an der 2p-Schwelle, muss einer starken Lokalisierung des 2p-rumpflochangeregten Zwischenzustandes zugeschrieben werden. Die genaue Analyse der Veränderung des resonant-Raman-Verhaltens in der 2p-RESPES könnte wertvolle komplementäre Informationen liefern, wird aber durch die Gegenwart der Argon-Valenzemission zu stark behindert, um konkrete Aussagen zuzulassen. Die Analyse der RESPES-Daten lässt den Schluss zu, dass die tatsächliche Besetzung der 3d-Zustände durch die Substratwechselwirkung nicht nennenswert verändert wird. Neben der Charakterisierung der großen magnetischen Clustermomente nach Spin- und Bahnanteilen vermitteln die Experimente dieser Arbeit einen guten Einblick in die Veränderungen der elektronischen Eigenschaften durch die Wechselwirkung mit dem Graphit. Der Einfluss des Substrates führt zu einer starken Verkleinerung der magnetischen Momente. Offensichtlich wird die elektronische Gesamtenergie an der Grenzfläche durch die Ausbildung von hybridisierten Zuständen minimiert, welche nahe der Fermienergie eine geringe Zustandsdichte besitzen.
The theoretical work presented in this thesis is concerned with the highest possible oxidation states of the 5d transition metal row. Based on a validation study of several DFT functionals against accurate coupled-cluster CCSD(T) methods we will present calculations on a series of new high oxidation state HgIV species. Quantum-chemical calculations have also been applied to various fluoro complexes of gold in oxidation states +V through +VII to evaluate the previously claimed existence of AuF7. The calculations indicate clearly that the oxidation state (+V), e.g., in [AuF5]2, remains the highest well-established gold oxidation state. Further calculations on iridium in oxidation state (+VII) show that IrF7 and IrOF5 are viable synthetic targets, whereas higher oxidation states of iridium appear to be unlikely. Structures and stabilities of several osmium fluorides and oxyfluorides were also studied in this thesis. It is shown that homoleptic fluorides all the way up to OsF8 may exist. Combining the results of the most accurate quantum-chemical predictions of this thesis and of the most reliable experimental studies, we observe a revised trend of the highest oxidation states of the 5d transition metal row. From lanthanum (+III) to osmium (+VIII), there is a linear increase of the highest oxidation states with increasing atomic number. Thereafter, we observe a linear descent from osmium (+VIII) to mercury (+IV). We will also present a short outlook to the transition metals of the 3d and 4d row and their highest reachable oxidation states.
In this thesis the electronic and magnetic structure of the transition metal oxyhalides TiOCl, TiOBr and VOCl is investigated. The main experimental methods are photoemission (PES) and x-ray absorption (XAS) spectroscopy as well as resonant inelastic x-ray scattering (RIXS). The results are compared to density-functional theory, and spectral functions from dynamical mean-field theory and different kinds of model calculations. Questions addressed here are those of the dimensionality of the magnetic and electronic interactions, the suitability of the oxyhalides as prototypical strongly correlated model systems, and the possibility to induce a filling-controlled insulator-metal transition. It turns out that TiOCl is a quasi-one-dimensional system with non-negligible two-dimensional coupling, while the one-dimensional character is already quite suppressed in TiOBr. In VOCl no signatures of such one-dimensional behavior remain, and it is two-dimensional. In all cases, frustrations induced by the crystal lattice govern the magnetic and electronic properties. As it turns out, although the applied theoretical approaches display improvements compared to previous studies, the differences to the experimental data still are at least partially of qualitative instead of quantitative nature. Notably, using RIXS, it is possible for the first time in TiOCl to unambiguously identify a two-spinon excitation, and the previously assumed energy scale of magnetic excitations can be confirmed. By intercalation of alkali metal atoms (Na, K) the oxyhalides can be doped with electrons, which can be evidenced and even quantified using x-ray PES. In these experiments, also a particular vertical arrangement of dopants is observed, which can be explained, at least within experimental accuracy, using the model of a so-called "polar catastrophe". However, no transition into a metallic phase can be observed upon doping, but this can be understood qualitatively and quantitatively within an alloy Hubbard model due to the impurity potential of the dopants. Furthermore, in a canonical way a transfer of spectral weight can be observed, which is a characteristic feature of strongly correlated electron systems. Overall, it can be stated that the transition metal oxyhalides actually can be regarded as prototypical Mott insulators, yet with a rich phase diagram which is far from being fully understood.
Die Reaktivität von Diboranen(4) (1,2-Dihalogendiboranen(4)) gegenüber von metallischen und nicht-metallischen Lewis-Basen wurde untersucht. Die Ergebnisse zeigen, dass die oxidative Addition einer Bor-Halogen-Bindung an ein Platin(0)-Komplex selektiv verläuft und in trans-Diboran(4)yl-Bisphosphan-Platin-Komplexen resultiert. Bei Verwendung von 1,2-Dihalogen-1,2-diaryldiboranen(4) findet sich in den korrespondierenden trans-Diboran(4)yl-Platin-Komplexen eine dative Bindung des Platin-Zentralatoms zum entfernten zweiten Bor-Atom, welche sowohl in Lösung als auch im Festkörper beobachtet wird. Die erhaltenen trans-Diboran(4)yl-Komplexe wurden auf ihre Reaktivität untersucht, hierbei konnte erstmals durch Reduktion ein Diboren-Platin-Komplex synthetisiert werden. Die Untersuchung der Reaktivität von nicht-metallischen Lewis-Basen ergab eine Reihe von sp2-sp3-Diboranen an die entweder PEt3 oder PMeCy2 koordiniert ist. In Abhängigkeit des sterischen Anspruches finden sich zwei Isomere mit 1,2- und 1,1'-Anordnung der Halogene. Die 1,2-Isomere zeigen hierbei im Festkörper eine Bor-Halogen-Bor-Brücke mit einer dativen Halogen-Bor-Bindung zwischen dem Halogen und dem sp2-Borzentrum.
Im Rahmen dieser Doktorarbeit sind neue Borylenkomplexe synthetisiert worden, die am Boratom keinen pi-Donor tragen und eine umfangreiche Chemie ermöglichen. Zum Beispiel wurde eine [2+2]-Cycloaddition und eine Metathesereaktion eines Borylenkomplexes beobachtet. Ebenfalls wurde ein stabiles Bornucleophil erhalten.
Im Rahmen dieser Arbeit wurde die Übergangsmetall-katalysierte Diborierung verschiedener ungesättigter Substrate untersucht. Die Diborierung von Dialkinen ermöglichte die Synthese einer Reihe neuer Verbindungen, welche sich in drei Gruppen einteilen lassen: i) Einkernige [4]Diboradicarbaferrocenophane, die zusätzlich entweder direkt oder über einen Spacer eine CC Dreifachbindung tragen; ii) zweikernige Komplexe, bei denen das [4]Ferrocenophanfragment über die zweite CC Dreifachbindung an ein niedervalentes Platinfragment koordiniert ist und iii) zweikernige Bis [4]diboradicarbaferrocenophane durch die Diborierung beider Dreifachbindungen des Dialkins. Von den vier Vertreter von Gruppe i) ist bei zweien die zweite CC Dreifachbindung direkt an die Bis(boryl)alkeneinheit gebunden, während bei den anderen eine Spacergruppe vorhanden ist. Die Darstellung der Komplexe kann entweder durch katalytische Diborierung der Dialkine durch [Fe{C5H4B(NMe2)}2] oder durch direkte Umsetzung mit [Fe{C5H4B(NMe2)}2Pt(PEt3)2] erfolgen. Hingegen führt die Umsetzung von [Fe{C5H4B(NMe2)}2Pt(PEt3)2] mit äquimolaren Mengen Dialkin zur Bildung der zweiten Verbindungen von Gruppe ii). Hier ist die zweite CC Dreifachbindung an ein [Pt(PEt3)2] Fragment koordiniert, wodurch ein Platinalkinkomplex entsteht. Unter den Produkten der Gruppe iii) sind zuerst die Komplexe zu nennen, die zwei Ferrocenophangruppen tragen. Die so synthetisierten Produkte weisen jeweils zwei chirale Ebenen auf und wurden deshalb als Diastereomerenpaare erhalten. Es konnte gezeigt werden, dass die einzelnen Diastereomere durch Erhitzen in Lösung ineinander umgewandelt werden können. Mittels DFT-Rechnungen konnte zudem ein plausibler Mechanismus aufgedeckt werden. Neben den Bis [4]ferrocenophanen wurde ein Komplex dargestellt, in dem ein [4]Diboradicarbaferrocenophanfragment über eine Spacerfunktion an einen entsprechenden von Bis(benzol)chrom abgeleiteten Metalloarenophanrest gebunden ist. Weiterhin wurden durch Umsetzung von [Pt(PEt3)3] mit den entsprechenden Dialkinen in unterschiedlicher Stöchiometrie jeweils drei einkernige bzw. zweikernige Platinalkinkomplexe sowie ein Platinalkenkomplex synthetisiert. Die IR-spektroskopischen Untersuchungen legen die Formulierung als Platinacyclopropene bzw. Platinacyclopropane nahe. Durch die Diborierung von Isocyaniden konnte unter bemerkenswert milden Reaktionsbedingungen eine Reihe von chiralen, einkernigen Bis(boryl)iminokomplexen dargestellt werden. Die Synthese verläuft entweder durch direkte Umsetzung der Diborane(4) mit den entsprechenden Isocyaniden oder, mit verlängerten Reaktionszeiten auch durch Diborierung der Isocyanide mittels der entsprechenden [3]Metalloarenophane. Durch Umsetzung von [2]Borametalloarenophanen mit Diisocyaniden konnten zudem verschiedene zwei- bzw. dreikernige Bis(boryl)iminokomplexe zugänglich gemacht werden. Die hierzu ausgewählten Diisocyanide tragen wiederum eine Spacereinheit zwischen den beiden NC Funktionalitäten. Genau wie bei den Reaktionen von Dialkinen treten auch hier die Produkte als Paare von Diastereomeren auf. Ein weiteres Projekt beschäftigte sich mit der oxidativen Addition von [Fe{C5H4B(NMe2)}2] an verschiedene Übergangsmetallkomplexe. Die Umsetzungen führten allerdings in keinem Fall zur Bildung der gewünschten Bis(boryl)metallkomplexe. Bei verschiedenen Platinkomplexen kann jedoch die Bildung eines einheitlichen Produkts beobachtet werden. Es wird deshalb in Übereinstimmung mit den spektroskopischen Daten vermutet, dass es sich dabei um ein [2.2]Diboraferrocenophan handelt. Eine saubere Isolierung des Produkts gelingt jedoch nicht, weshalb der strukturelle Nachweis bislang nicht geführt werden kann. Abschließend konnte dabei gezeigt werden, dass mehrtägiges Erhitzen von [Fe{C5H4B(NMe2)}2Pt(PEt3)2] in Lösung hochselektiv zur Bildung des mutmaßlichen [2.2]Diboraferrocenophans führt. Weiterhin ist auch die Umsetzung von [Fe{C5H4B(NMe2)}2] mit katalytischen Mengen [Pt{P(CH2Cy)3}2] erfolgreich, führte jedoch nicht zu einer Isolierung des Produkts in Substanz.