Refine
Is part of the Bibliography
- yes (816)
Year of publication
Document Type
- Doctoral Thesis (413)
- Journal article (387)
- Conference Proceeding (4)
- Preprint (4)
- Master Thesis (3)
- Review (3)
- Habilitation (1)
- Other (1)
Keywords
- Molekularstrahlepitaxie (32)
- Topologischer Isolator (32)
- Hadron-Hadron scattering (experiments) (31)
- Quantenpunkt (30)
- Kernspintomografie (28)
- Parton Distributions (25)
- Photoelektronenspektroskopie (23)
- MRI (20)
- Organischer Halbleiter (20)
- NMR-Tomographie (19)
- ATLAS detector (18)
- NMR-Bildgebung (18)
- Quecksilbertellurid (18)
- physics (18)
- Halbleiter (17)
- ARPES (16)
- Decay (15)
- Drei-Fünf-Halbleiter (15)
- proton-proton collision (15)
- Extension (14)
- Galliumarsenid (14)
- Optischer Resonator (14)
- magnetic resonance imaging (14)
- Halbleiterlaser (13)
- Heterostruktur (13)
- HgTe (13)
- Higgs boson (13)
- Nanostruktur (13)
- quantum dot (13)
- LHC (12)
- Optische Spektroskopie (12)
- Organische Solarzelle (12)
- Rastertunnelmikroskopie (12)
- Spintronik (12)
- Ultrakurzer Lichtimpuls (12)
- ++ (11)
- Dünne Schicht (11)
- Festkörperphysik (11)
- High energy physics (11)
- Physics (11)
- Spektroskopie (11)
- Squark (11)
- molecular beam epitaxy (11)
- topological insulator (11)
- topological insulators (11)
- Zwei-Sechs-Halbleiter (10)
- Elektronischer Transport (9)
- Oberflächenphysik (9)
- Optoelektronik (9)
- Physik (9)
- Raman-Spektroskopie (9)
- Zinkselenid (9)
- Cross-Section (8)
- Einzelphotonenemission (8)
- Elektronenstruktur (8)
- Femtosekundenbereich (8)
- Fotovoltaik (8)
- Grenzfläche (8)
- Organisches Molekül (8)
- Parton distributions (8)
- Rastertunnelmikroskop (8)
- Röntgen-Photoelektronenspektroskopie (8)
- Semimagnetischer Halbleiter (8)
- electronic properties and materials (8)
- photoelectron spectroscopy (8)
- quantum dots (8)
- semiconductor (8)
- Bildgebendes Verfahren (7)
- Elektronenspin (7)
- Exziton-Polariton (7)
- Kernspintomographie (7)
- Kondo-Effekt (7)
- LEED (7)
- Laser (7)
- Lunge (7)
- MBE (7)
- Mass (7)
- Quantenwell (7)
- Rekombination (7)
- Röntgenspektroskopie (7)
- Spin-Bahn-Wechselwirkung (7)
- Spintronics (7)
- Supersymmetry (7)
- spintronics (7)
- Beyond Standard Model (6)
- Computersimulation (6)
- DFB-Laser (6)
- Exziton (6)
- GaAs (6)
- Gluino Production (6)
- Hadron colliders (6)
- Halbleiteroberfläche (6)
- MRT (6)
- Magnetische Kernresonanz (6)
- Magnetismus (6)
- Magnetowiderstand (6)
- Mikroresonator (6)
- Monte-Carlo (6)
- Nanodraht (6)
- Nanopartikel (6)
- Optik (6)
- Perowskit (6)
- Pulsformung (6)
- XPS (6)
- electronic structure (6)
- organic semiconductors (6)
- semiconductor lasers (6)
- semiconductors (6)
- two-dimensional materials (6)
- Übergangsmetalloxide (6)
- ATLAS (5)
- ATLAS <Teilchendetektor> (5)
- Cadmiumselenid (5)
- Diffusion (5)
- Dotierung (5)
- Dünnschichtsolarzelle (5)
- Elektronenkorrelation (5)
- Elektronenspinresonanz (5)
- Energy (5)
- Halbleiterschicht (5)
- Herz (5)
- Higgs bosons (5)
- MASS (5)
- Magnetische Resonanz (5)
- Magnetischer Halbleiter (5)
- Manganarsenide (5)
- Manganverbindungen (5)
- Molekül (5)
- NMR (5)
- NMR-Spektroskopie (5)
- Niederdimensionaler Halbleiter (5)
- Oberfläche (5)
- Parallele Bildgebung (5)
- Photoemission (5)
- Photolumineszenz (5)
- Photolumineszenzspektroskopie (5)
- Photovoltaik (5)
- Quanten-Hall-Effekt (5)
- Rashba-Effekt (5)
- Röntgenbeugung (5)
- Silber (5)
- Simulation (5)
- Spin (5)
- Supraleitung (5)
- Top physics (5)
- Top quark (5)
- XMCD (5)
- atherosclerosis (5)
- energy (5)
- magnetic properties and materials (5)
- microscopy (5)
- mouse (5)
- nanoparticles (5)
- pulse shaping (5)
- recombination (5)
- semiconductor laser (5)
- solar cells (5)
- spectroscopy (5)
- spin (5)
- Adsorbat (4)
- Aerogel (4)
- Ag(111) (4)
- Aluminiumarsenid (4)
- Biophysik (4)
- Boson (4)
- Breaking (4)
- Diffusionsverfahren <Halbleitertechnologie> (4)
- Distributions (4)
- Elektronengas (4)
- Elektronentransport (4)
- Festkörperoberfläche (4)
- Galliumarsenid-Bauelement (4)
- Galliumarsenidlaser (4)
- Gasionisationsdetektor (4)
- Hierarchy (4)
- Ladungstransport (4)
- Magnetoelektronik (4)
- Magnetresonanztomographie (4)
- Mikroskopie (4)
- NEXAFS (4)
- Nahfeldoptik (4)
- Nanometerbereich (4)
- Nickelverbindungen (4)
- Oberflächenzustand (4)
- PTCDA (4)
- Perfusion (4)
- Perovskite (4)
- Perylendianhydrid (4)
- Photochemische Reaktion (4)
- Photostrom (4)
- Plasmon (4)
- Quantendraht (4)
- Quantenkaskadenlaser (4)
- RIXS (4)
- Semiconductor (4)
- Siliciumcarbid (4)
- Sol-Gel-Verfahren (4)
- Solarzelle (4)
- Spin flip (4)
- Strahlungstransport (4)
- Symmetry (4)
- Topologie (4)
- Wide-gap-Halbleiter (4)
- Wärmeleitfähigkeit (4)
- XRD (4)
- Z boson (4)
- emission (4)
- imaging (4)
- mice (4)
- microcavity (4)
- n-Halbleiter (4)
- optical spectroscopy (4)
- organic solar cells (4)
- plasmonics (4)
- quantum optics (4)
- radial (4)
- scanning tunneling microscopy (4)
- spin injection (4)
- strong coupling (4)
- superconductivity (4)
- AFM (3)
- Abstimmbarer Laser (3)
- Adaptivregelung (3)
- Adsorption (3)
- AlGaAs (3)
- Arteriosklerose (3)
- Bosons (3)
- CdSe (3)
- CdTe (3)
- CePt5 (3)
- Compressed Sensing (3)
- Computertomografie (3)
- Coulomb-Blockade (3)
- Cu(111) (3)
- DFB laser (3)
- Diindenoperylen (3)
- Einzelmolekülmikroskopie (3)
- Electroweak interaction (3)
- Elektronenspektroskopie (3)
- Elektronische Eigenschaft (3)
- Events (3)
- Feldeffekttransistor (3)
- Ferromagnetic Semiconductors (3)
- Ferromagnetische Schicht (3)
- Fourier-Spektroskopie (3)
- Frequenzvervielfachung (3)
- Gitterbaufehler (3)
- Graphen (3)
- Hadron Colliders (3)
- Halbleiterphysik (3)
- Herstellung (3)
- Herzmuskel (3)
- Heterostruktur-Bauelement (3)
- Higgs (3)
- Hochauflösendes Verfahren (3)
- Indiumarsenid (3)
- Indiumphosphid (3)
- Kohlenstoff (3)
- Kohärente Kontrolle (3)
- Konfokale Mikroskopie (3)
- Kontrastmittel (3)
- Kraftmikroskopie (3)
- Large Hadron Collider (3)
- MOLLI (3)
- Magnetic Anisotropy (3)
- Magnetic resonance imaging (3)
- Magnetischer Röntgenzirkulardichroismus (3)
- Mangan (3)
- Manganate (3)
- Manganselenide (3)
- Mangansilicide (3)
- Maus (3)
- Measuring Masses (3)
- Memristor (3)
- Mikrokavität (3)
- Mikrooptik (3)
- Mikrostruktur (3)
- Model (3)
- Models (3)
- Molecular Beam Epitaxy (3)
- Molekülphysik (3)
- Nanoelektronik (3)
- Nanooptik (3)
- Niederdimensionales Elektronengas (3)
- OLED (3)
- Optical spectroscopy (3)
- Optimierung (3)
- Optische Eigenschaft (3)
- Organic Semiconductors (3)
- Pair Production (3)
- Parallel Imaging (3)
- Particle data analysis (3)
- Photoluminescence (3)
- Photonische Kristalle (3)
- Phthalocyanin (3)
- Physikalische Eigenschaft (3)
- Physikunterricht (3)
- Polymere (3)
- Proton-Proton Collisions (3)
- Quantenkontrolle (3)
- Quantum dots (3)
- Rashba effect (3)
- Rastertunnelspektroskopie (3)
- Regelung (3)
- Rekonstruktion (3)
- Relaxation (3)
- Relaxationszeit (3)
- Relaxometry (3)
- Resonanz-Tunneleffekt (3)
- Röntgenabsorptionsspektroskopie (3)
- Röntgendiffraktometrie (3)
- Röntgenmikroskopie (3)
- STM (3)
- Schwere-Fermionen-System (3)
- Search (3)
- Selbstorganisation (3)
- Spin-Gitter-Relaxation (3)
- Supersymmetric models (3)
- Supraleiter (3)
- Tissue Engineering (3)
- Transistor (3)
- Transportprozess (3)
- Transportspektroskopie (3)
- Tumor (3)
- W boson (3)
- Weak (3)
- Wärmeübertragung (3)
- Würzburg / Sonderforschungsbereich II-VI-Halbleiter (3)
- Zweidimensionales Material (3)
- absorption (3)
- applied physics (3)
- charge transfer (3)
- computed tomography (3)
- condensed matter physics (3)
- decay (3)
- density functional theory (3)
- diffusion (3)
- dynamics (3)
- exciton (3)
- in vivo imaging (3)
- infrared spectroscopy (3)
- magnetic resonance (3)
- magnetism (3)
- nanostructures (3)
- nuclear magnetic resonance (3)
- optoelectronics (3)
- organic molecule (3)
- organic semiconductor (3)
- parallel imaging (3)
- perfusion (3)
- photoemission (3)
- photoluminescence (3)
- photonic devices (3)
- pulse wave velocity (3)
- quantum control (3)
- quantum physics (3)
- quantum well (3)
- quantum wells (3)
- qubits (3)
- resonant tunneling diode (3)
- single photon emission (3)
- spin-orbit coupling (3)
- states (3)
- surface science (3)
- surfaces, interfaces and thin films (3)
- thermal conductivity (3)
- (Ga (2)
- 3D-Bildgebung (2)
- 4D flow (2)
- Absorptionsspektroskopie (2)
- Algorithm (2)
- Aminosäuren (2)
- Antimonide (2)
- Antimonverbindungen (2)
- Aorta (2)
- Atherosclerosis (2)
- Axion (2)
- Ballistischer Transport (2)
- Bi2Se3 (2)
- Bilderzeugung (2)
- Bildgebung (2)
- Bismuthene (2)
- Bismutselenide (2)
- Bismutverbindungen (2)
- Bose-Einstein-Kondensation (2)
- C60 (2)
- CAIPIRINHA (2)
- CSI (2)
- CT (2)
- Cadmiumsulfid (2)
- Cadmiumtellurid (2)
- Calciumphosphat (2)
- Calciumphosphate (2)
- Cerlegierung (2)
- Coherent control (2)
- Computertomographie (2)
- Constraints (2)
- Cross-section (2)
- CuPc (2)
- Deformation (2)
- Dimension 2 (2)
- Dispersion (2)
- Dreidimensionale Rekonstruktion (2)
- Dreiecksgitter (2)
- Durchblutung (2)
- Dynamik (2)
- EW (2)
- Edelmetall (2)
- Einmodenlaser (2)
- Einzelphotonenquelle (2)
- Electromagnon (2)
- Elektromagnon (2)
- Elektron-Phonon-Wechselwirkung (2)
- Elektronenflüssigkeit (2)
- Elektronenstrahllithographie (2)
- Elektronenzustand (2)
- Energiespeicher (2)
- Epitaxieschicht (2)
- Epitaxy (2)
- European Organization for Nuclear Research. ATLAS Collaboration (2)
- Excitons (2)
- Experimental physics (2)
- Extensions of gauge sector (2)
- FIR-Spektroskopie (2)
- FT-IR-Spektroskopie (2)
- Feldstärkemessung (2)
- Femtosekundenlaser (2)
- Fernsehmaske (2)
- Ferromagnete (2)
- Ferromagnetikum (2)
- Ferromagnetische Halbleiter (2)
- Ferromagnetismus (2)
- Flash-Speicher (2)
- Fluor-19 (2)
- Fluoreszenz (2)
- Fragmentation (2)
- Fullerene (2)
- Funktionswerkstoff (2)
- GRAPPA (2)
- GaMnAs (2)
- Galliumantimonid (2)
- Galliumnitrid (2)
- Gas (2)
- Germanium (2)
- Glas (2)
- Gluino production (2)
- Gold (2)
- Graphene (2)
- H-1-NMR spectroscopy (2)
- HEMT (2)
- HRXRD (2)
- Halbleiter-Supraleiter-Kontakt (2)
- Halbleitergrenzflächen (2)
- Halbmetall (2)
- Herzfunktionsdiagnostik (2)
- Herzinfarkt (2)
- Heusler (2)
- Heuslersche Legierung (2)
- Hochfrequenz (2)
- Hochleistungslaser (2)
- Hochtemperatur (2)
- Hypothetical gauge bosons (2)
- II-VI semiconductor (2)
- II-VI-Halbleiter (2)
- Imaging techniques (2)
- Impact (2)
- Impulslaser (2)
- InP (2)
- Indiumnitrid (2)
- Inelastische Röntgenstreuung (2)
- Inflammation (2)
- Interbandkaskadenlaser (2)
- Interference microscopy (2)
- Isomerizierung (2)
- Jets (2)
- Kardiovaskuläres System (2)
- Kernspinresonanz (2)
- Kohlenwasserstoffe (2)
- Kohärenz (2)
- Kristallfeld (2)
- LEEM (2)
- Ladungstransfer (2)
- Laserdiode (2)
- Lasertechnologie (2)
- Licht-Materie-Wechselwirkung (2)
- Linienbreite (2)
- Lung (2)
- Lungenfunktion (2)
- Luttinger liquid (2)
- Luttinger-Flüssigkeit (2)
- MR (2)
- Magnetic Resonance Imaging (2)
- Magnetic Topological Insulator (2)
- Magnetic resonance (2)
- Magnetische Anisotropie (2)
- Magnetische Eigenschaft (2)
- Magnetit (2)
- Magnetoelektrischer Effekt (2)
- Magnetotransport (2)
- Magnetpartikelbildgebung (2)
- Magnetresonanz (2)
- Magnetresonanztomografie (2)
- Magnon (2)
- Mehrschichtsystem (2)
- Messprozess (2)
- Metall-Isolator-Phasenumwandlung (2)
- Metalloberfläche (2)
- Mice (2)
- Micromegas (2)
- Mikrosäulenresonator (2)
- Mn)As (2)
- Modellbasierte Rekonstruktion (2)
- Modellierung (2)
- Molecular beam epitaxy (2)
- Molekulardynamik (2)
- Monoschicht (2)
- Mott-Isolator (2)
- Multiferroics (2)
- Multiferroikum (2)
- NMR-Mikroskopie (2)
- NTCDA (2)
- Nanostrukturiertes Material (2)
- Nanowire (2)
- Natrium (2)
- Neutrino (2)
- NiMnSb (2)
- Nichtlineare Spektroskopie (2)
- Niederdimensionales System (2)
- ODMR-Spektroskopie (2)
- Oberflächenplasmonresonanz (2)
- Organische Halbleiter (2)
- Organischer Feldeffekttransistor (2)
- Oxygen (2)
- Pair production (2)
- Paralleler Prozess (2)
- Patron Distributions (2)
- Pflanzen (2)
- Photoelectron Spectroscopy (2)
- Photonischer Kristall (2)
- Plants (2)
- Plus plus (2)
- Polariton (2)
- Polariton Lasing (2)
- Poröser Stoff (2)
- Program (2)
- Pulmonary imaging (2)
- Pump-Probe-Technik (2)
- QAHE (2)
- QCD (2)
- Quantenkommunikation (2)
- Quantenoptik (2)
- Quantenpunkte (2)
- Quantenpunktlaser (2)
- Quantentrog (2)
- Quantum anomalous Hall effect (2)
- Quark & gluon jets (2)
- RHEED (2)
- Raman (2)
- Raman spectroscopy (2)
- Rapidity (2)
- Rasterelektronenmikroskopie (2)
- Relativistic heavy-ion collisions (2)
- Relaxometrie (2)
- Resonanz-Tunneldiode (2)
- Riesenmagnetowiderstand (2)
- Röntgen-Kleinwinkelstreuung (2)
- Röntgenabsorption (2)
- Röntgenemission (2)
- Röntgenmikroskop (2)
- Röntgenstrahlung (2)
- Röntgenstreuung (2)
- Röntgenstrukturanalyse (2)
- SPA-LEED (2)
- Scanning Tunneling Spectroscopy (2)
- Scanning microscopy (2)
- Scattering (2)
- Semiconductors (2)
- Silicon carbide (2)
- Siliziumcarbid (2)
- Solarzellen (2)
- Spectromicroscopy (2)
- Spin defect (2)
- Spin-Spin-Relaxation (2)
- Spindynamik (2)
- Spinell (2)
- Spininjektion (2)
- Starke Kopplung (2)
- Steady-State Sequences (2)
- Steady-State-Sequenzen (2)
- Störstellen (2)
- Superisolierung (2)
- Surface plasmons (2)
- Surface states (2)
- Symmetry-breaking (2)
- T1 (2)
- T1-Quantifizierung (2)
- T1rho (2)
- T1ρ (2)
- T2 (2)
- Technische Optik (2)
- Thermoelektrizität (2)
- Thermometrie (2)
- Thin Films (2)
- Tieftemperatur (2)
- Titan-Saphir-Laser (2)
- Tomografie (2)
- Top-Quark (2)
- Topologische Supraleitung (2)
- Transparent-leitendes Oxid (2)
- Transport (2)
- UPS (2)
- Ultrafast information processing (2)
- Ultrafast spectroscopy (2)
- Ultrakurzzeitspektroskopie (2)
- Ultraviolett-Photoelektronenspektroskopie (2)
- Verbindungshalbleiter (2)
- WSS (2)
- WZ (2)
- Wechselwirkung (2)
- Weiche Röntgenstrahlung (2)
- Wellenleiter (2)
- Wirkungsquerschnitt (2)
- Wärmeisolierstoff (2)
- Wärmeleitung (2)
- Wärmeschutz (2)
- X-ray microscopy (2)
- XES (2)
- Z Boson (2)
- Zeitrichtung (2)
- Zinkoxid (2)
- ZnSe (2)
- Zwischenmolekulare Kraft (2)
- adaptive optimization (2)
- adaptive quantum control (2)
- adsorption (2)
- amino acids (2)
- anisotropy energy (2)
- aortic arch (2)
- balanced SSFP (2)
- ballistic transport (2)
- band structure (2)
- calcium phosphate (2)
- carbon (2)
- carbon nanotubes (2)
- cardiac (2)
- dSTORM (2)
- defects (2)
- diagnosis (2)
- doping (2)
- electrical and electronic engineering (2)
- electron (2)
- epitaxy (2)
- evolutionary algorithm (2)
- excitons (2)
- ferromagnetic semiconductors (2)
- ferromagnetism (2)
- field (2)
- freie Atmung (2)
- gas (2)
- gas phase (2)
- generation (2)
- half metal (2)
- heart (2)
- heat transfer (2)
- helical edge states (2)
- honeycomb lattice (2)
- inflammation (2)
- interband cascade lasers (2)
- interface (2)
- intermolecular interaction (2)
- inverse photoemission (2)
- laser spectroscopy (2)
- lung (2)
- macrophages (2)
- magnetic anisotropy (2)
- magnetic susceptibility (2)
- mapping (2)
- materials for optics (2)
- memory (2)
- mesoscopic (2)
- mesoscopics (2)
- metamorphic buffer layer (2)
- model (2)
- modulation spectroscopy (2)
- nano (2)
- nano optics (2)
- nano structure (2)
- nanophotonics and plasmonics (2)
- nanotechnology (2)
- nanowire (2)
- nanowires (2)
- neutrinos (2)
- nicht-kartesische Bildgebung (2)
- non-Cartesian Imaging (2)
- optical physics (2)
- optics and photonics (2)
- optimization (2)
- organic (2)
- organic light emitting diodes (2)
- organic photovoltaic (2)
- organic photovoltaics (2)
- organic thin films (2)
- organische Halbleiter (2)
- organische Photovoltaik (2)
- oscillations (2)
- oxygen vacancies (2)
- photocurrent (2)
- photoemission spectroscopy (2)
- photon statistics (2)
- phthalocyanine (2)
- polaritons (2)
- pp Collisions (2)
- proton-proton collisions (2)
- proton-proton-collision (2)
- proton–proton collisions (2)
- quantification (2)
- quantum dot laser (2)
- quantum information (2)
- quantum key distribution (2)
- quantum point contact (2)
- quantum spin hall insulator (2)
- reconstruction (2)
- resonant photoelectron spectroscopy (2)
- room temperature (2)
- safety (2)
- scanning tunneling spectroscopy (2)
- search (2)
- semiconductor interfaces (2)
- semiconductor quantum dot (2)
- semiconductor quantum dots (2)
- semimagnetic semiconductors (2)
- shadow mask (2)
- signal to noise ratio (2)
- silicon vacancy (2)
- single electron transistor (2)
- sodium (2)
- spin polarization (2)
- spin–orbit coupling (2)
- spontaneous symmetry breaking (2)
- standard model (2)
- superinsulation (2)
- surface state (2)
- surface states (2)
- thermoelectrics (2)
- thermopower (2)
- thin films (2)
- three-dimensional imaging (2)
- topological matter (2)
- transition radiation (2)
- transport (2)
- two-dimensional topological insulator (2)
- vacancy (2)
- verdünnt magnetische Halbleiter (2)
- vicinal surfaces (2)
- wall shear stress (2)
- waveguides (2)
- x-ray emission (2)
- Übergangsmetall (2)
- Übergitter (2)
- "(Ga (1)
- (13)C (1)
- (U)SAXS (1)
- (resonant) photoemission spectroscopy (1)
- + (1)
- 0.2 Tesla (1)
- 1550 nm (1)
- 1994> (1)
- 19F MR (1)
- 19F-MR (1)
- 19F-MRT (1)
- 1H MRI (1)
- 1H MRT (1)
- 2 Jets (1)
- 2 Photon Photoemission (1)
- 2-photon-photoemission (1)
- 23Na (1)
- 23Na-MRT (1)
- 2D (1)
- 2DEG (1)
- 3 Tesla (1)
- 3D (1)
- 3D Erdfeld-NMR Tomograph (1)
- 3D Pulverdruck (1)
- 3D X-ray microscopy (1)
- 3D analysis (1)
- 3D powder printing (1)
- 3D printing (1)
- 3D reconstruction (1)
- 3D topological insulator (1)
- 3D-Druck (1)
- 4D flow MRI (1)
- 4H (1)
- 8 TEV (1)
- AC Gradients (1)
- AC Stark effect (1)
- AG(110) (1)
- ASAXS (1)
- ATLAS New Small Wheel (1)
- ATLAS New Small Wheels (NSW) (1)
- ATLAS experiment (1)
- ATLAS-Detektor (1)
- AZO (1)
- Aberration (1)
- Abschattung (1)
- Abschirmung (1)
- Absorption (1)
- Abstimmbare Laser (1)
- Abwärmenutzung (1)
- Accelerator modelling and simulations (multi-particle dynamics; single-particle dynamics) (1)
- Acceptor (1)
- Acquisition-weighting (1)
- Acute Myocardial Infarction (1)
- Adaptive Optics (1)
- Adaptive Optik (1)
- Adaptive Optimierung (1)
- Adaptive Quanten Kontrolle (1)
- Adhäsion (1)
- Adiabatische Modenanpassung (1)
- Adsorbate (1)
- Adsorbate System (1)
- Adsorbates (1)
- Adsorbatsystem (1)
- Adsorptionskinetik (1)
- Adsorptionsschicht (1)
- Aerogele (1)
- Ag (1)
- Aharonov-Bohm (1)
- Aharonov-Casher phase (1)
- Aharonov-Casher-Effekt (1)
- Akquisitions-Wichtung (1)
- Aktivierung (1)
- Akzeptor (1)
- Akzeptor <Chemie> (1)
- AlGaInP (1)
- Aluminium-dotiertes Zinkoxid (1)
- Aluminiumoxide (1)
- Ambipolarer Ladungstransport (1)
- Amplifier (1)
- Analogschaltung (1)
- Analyse latenter Strukturen (1)
- Analysis (1)
- Analytische Simulation (1)
- Angle-resolved Photoemission Spectroscopy (1)
- Angular Resolved Photoelectron Spectroscopy (1)
- Anisotrope Diffusion (1)
- Anisotropic Magnetoresistance (1)
- Anisotropie (1)
- Anisotropieenergie (1)
- Anisotropy (1)
- Antenne (1)
- Antiferromagnet (1)
- Antiferromagnetikum (1)
- Antiferromagnetismus (1)
- Antimon (1)
- Aortic arch (1)
- ApoE\(^{(-/-)}\) (1)
- Applied physics (1)
- Array (1)
- Artefakt <Bildgebende Diagnostik> (1)
- Arterial water (1)
- Artery Models (1)
- Asthma (1)
- Atherosclerosis, intracranial arteries (1)
- Atherosklerose (1)
- Atlas detector (1)
- Atom und Molekülphysik (1)
- Atomgitter (1)
- Atomic (1)
- Atomic Force Microscopy (1)
- Atomic and molecular interactions with photons (1)
- Atomic force microscopy (1)
- Atomketten (1)
- Atomlagenabscheidung (1)
- Atomuhr (1)
- Attosekundenbereich (1)
- Au(111) (1)
- Aufnahmeplanung (1)
- Ausfrieren (1)
- Ausgangsmaterial (1)
- Austausch (1)
- Austauschaufspaltung (1)
- B-0 (1)
- B1 Mapping (1)
- BSG-Laser (1)
- BSM Higgs boson (1)
- BaBiO3 (1)
- Bakterielle Infektion (1)
- Ballistic Transport (1)
- Ballistischer Effekt (1)
- Ballistischer Ladungstransport (1)
- Band edge thermometry (1)
- Bandstruktur (1)
- Bandstrukturberechnung (1)
- Bariumtitanat (1)
- Bathophenanthrolin (1)
- Bauchaorta (1)
- Bauelemente (1)
- Bayerisches Zentrum für Angewandte Energieforschung / Abteilung Wärmedämmung und Wärmetransport (1)
- Bayesian methods (1)
- Berry phase (1)
- Beschichtung (1)
- Bessle functions (1)
- Bestimmung des Relaxations-Parameters in der Magnetresonanztomografie (1)
- Bestrahlung (1)
- Bhabha Scattering (1)
- BiTeBr (1)
- BiTeCl (1)
- BiTeI (1)
- Biegekristalltechnik (1)
- Bienenwolf (1)
- Bilagen-Solarzelle (1)
- Bildqualität (1)
- Bildrekonstruktion (1)
- Bindungsenergie (1)
- Biofabrication (1)
- Biologisches System (1)
- Biomedical engineering (1)
- Bismut (1)
- Bistability (1)
- Blei (1)
- Bloch Siegert (1)
- Bloch oscillations (1)
- Bloch-Siegert (1)
- Blood-brain barrier (1)
- Bornitrid (1)
- Boron Nitride (1)
- Bose-Einstein Correlations (1)
- Bose-Einstein condensation (1)
- Boson Production (1)
- Bragg-reflection waveguide (1)
- Brain (1)
- Branching fractions (1)
- Brassica napus (1)
- Breast-tumors (1)
- Breathing (1)
- Bruchfläche (1)
- Bruchmechanik (1)
- Brustaorta (1)
- Buckminsterfulleren (1)
- Bulk-boundary correspondence (1)
- Burst (1)
- By-Light Scattering (1)
- C-13-metabolic flux analysis (1)
- CCIG-Laser (1)
- CCIG-laser (1)
- CERN (1)
- CHIP (1)
- CIGS (1)
- CMR (1)
- CMR-Systeme (1)
- CMR-systems (1)
- CPP-GMR (1)
- CRLs (1)
- Calorimeter (1)
- Calorimeter methods (1)
- Capacitive Effects (1)
- Cardiac (1)
- Cardiovascular Magnetic Resonance (1)
- Cavity quantum electrodynamics (1)
- CdSe/ZnS Nanoteilchen (1)
- CdZnSe/ZnSe (1)
- CeCu6 (1)
- Chambers (1)
- Characterization and analytical techniques (1)
- Charakterisierung (1)
- Charge Carrier Generation (1)
- Charge Carrier Lifetime (1)
- Charge carrier recombination (1)
- Charge-Transfer (1)
- Charged-Particles (1)
- Charges recombination (1)
- Charm quark (1)
- Charmonia (1)
- Chemische Bindung (1)
- Chemische Verschiebung (1)
- Chemischer Austausch (1)
- Chemisorption (1)
- Cherenkov detectors (1)
- Chromoxid <Chrom(IV)-oxid> (1)
- Chronic obstrusive pulmonary disease (1)
- Cluster (1)
- Co (1)
- CoPt (1)
- Codierung (1)
- Coefficient (1)
- Coherent 2D Spectroscopy (1)
- Coherent Control (1)
- Coherent Multidimensional Spectroscopy (1)
- Coherent Two-dimensional Nanoscopy (1)
- Collective effects in quantum optics (1)
- Collicions (1)
- Color (1)
- Color Center (1)
- Combination (1)
- Compressed Sensig (1)
- Computer (1)
- Computerunterstütztes Lernen (1)
- Condensed matter (1)
- Core-shell (1)
- Core-shell Nanoteilchen (1)
- Correlated Electron Materials (1)
- Coulomb interaction (1)
- Coulomb-blockade (1)
- Couplings (1)
- CrO2 (1)
- Crop seed (1)
- Cross-Sections (1)
- Crystal (1)
- CuMnSb (1)
- Cystic fibrosis (1)
- DBR-Laser (1)
- DBR-laser (1)
- DC-Gating (1)
- DECAY (1)
- DFB-laser (1)
- DFT (1)
- DLS (1)
- DLTS (1)
- DMS (1)
- DNMR-Spektroskopie (1)
- DNS (1)
- DNS-Reparatur (1)
- Dark-Matter (1)
- Dark-matter (1)
- Dark-matter production (1)
- Datenspeicher (1)
- Dauerstrichbetrieb (1)
- Decay sequence (1)
- Decays (1)
- Deep Inelastic-scattering (1)
- Defektspektroskopie (1)
- Degradation <Technik> (1)
- Delamination (1)
- Delbruck Scattering (1)
- Density-weighting (1)
- Dependence (1)
- Detektor-Array (1)
- Deterioration (1)
- Diagnostic medicine (1)
- Diamant (1)
- Dichte-Wichtung (1)
- Dichtebestimmung in Theorie und Experiment (1)
- Dichtefunktionalformalismus (1)
- Dichtegewichtete Bildgebung (1)
- Didaktik (1)
- Dielektrikum (1)
- Differential Cross-Sections (1)
- Diffusion model (1)
- Diffusions-MRT (1)
- Diffusionsmodell (1)
- Dilatometrie (1)
- Dilute Nitrides (1)
- Diluted Magnetic Semiconductors (1)
- Diluted magnetic semiconductors (1)
- Dimension 3 (1)
- Dimensional Crossover (1)
- Dimerisierung (1)
- Dirac semimetal (1)
- Disordered semiconductor (1)
- Disperse Phase (1)
- Donor-Acceptor Interface (1)
- Doppeldiode (1)
- Dotierter Halbleiter (1)
- Double-Beta Decay (1)
- Dreidimensionale Bildverarbeitung (1)
- Dreidimensionales Bild (1)
- Dreidimensionales Modell (1)
- Drift-Diffusion (1)
- Drude model (1)
- Drude-Modell (1)
- Durchblutungsmessung (1)
- Durchstrahlungselektronenmikroskopie (1)
- Dynamic Imaging (1)
- Dynamic magnetic resonance imaging (1)
- Dynamical Supersymmetry Breaking (1)
- Dynamics (1)
- Dynamisch-ikonische Repräsentation (1)
- Dynamische Lichtstreuung (1)
- Dynamische MR Bildgebung (1)
- Dynamische Messung (1)
- Dyson orbitals (1)
- Dünnschichten (1)
- Dünnschichttechnik (1)
- Dünnschichttransistor (1)
- E(+)E(-) collicions (1)
- E-Learning (1)
- ECV (1)
- EDX spectra (1)
- EP Procedures (1)
- EPR Spektroskopie (1)
- EUV (1)
- EXAFS (1)
- Eccentricities (1)
- Echozeit (1)
- Einkristall (1)
- Einzelelektronentransistor (1)
- Einzelphotonenemisson (1)
- Elastische Spannung (1)
- Electrical transport (1)
- Electrochemical energy storage (1)
- Electromagnetic signals (1)
- Electron Paramagnetic Resonance (1)
- Electron Spin Resonance (1)
- Electron Transparency (1)
- Electron density (1)
- Electron spin (1)
- Electronic Structure (1)
- Electronic structure (1)
- Electronics (1)
- Electroweak Measurements (1)
- Electroweak Phase-Transition (1)
- Elektrische Entladung (1)
- Elektrolumineszenz (1)
- Elektromigration (1)
- Elektronen Tunneln (1)
- Elektronenbeugung (1)
- Elektronendichte (1)
- Elektronendichtebestimmung (1)
- Elektronenmikroskopie (1)
- Elektronenstrahllithografie (1)
- Elektronenstreuung (1)
- Elektronische Anregung (1)
- Elektronische Eigenschaften (1)
- Elektronische Korrelationen (1)
- Elektronisches Bauelement (1)
- Elektronisches Rauschen (1)
- Elementarteilchenphysik (1)
- Elementbestimmung (1)
- Emissionsvermoegen (1)
- Energie (1)
- Energieauflösung (1)
- Energiedispersiv (1)
- Energiedispersive Röntgenspektroskopie (1)
- Energielücke (1)
- Energierückgewinnungszeit (1)
- Energies (1)
- Energietechnik (1)
- Energy Harvesting (1)
- Ensemble-Modellierung (1)
- Entanglement (1)
- Envelopefunktionennäherung (1)
- Epitaxie (1)
- Erdfeld (1)
- Erdmagnetismus (1)
- Erzeugung Hoher Harmonischer (1)
- Erzeugung hoher Harmonischer (1)
- Event builder (1)
- Events GW150914 (1)
- Evolutionäre Optimierung (1)
- Evolutionärer Algorithmus (1)
- Excited states (1)
- Excited states spectroscopy (1)
- Exciton (1)
- Exciton-polariton condensate (1)
- Exotic mesons (1)
- Experimental Physics (1)
- Experimental stroke (1)
- Extensions of Higgs sector (1)
- Extensions of fermion sector (1)
- External-Cavity Quantum Cascade Laser (1)
- Externer-Kavitäts-Quanten-Kaskaden-Laser (1)
- Extinktion (1)
- Extrazellularvolumen (1)
- Extremes Ultraviolett (1)
- Exzitonen Diffusionslänge (1)
- Exzitonen Dynamik (1)
- Exzitonen Transport (1)
- Exzitonenbeweglichkeit (1)
- F-19 MRI (1)
- FAIR-ASL (1)
- FDTD (1)
- FDTD Simulation (1)
- FIB (1)
- FIONA (1)
- FTIR spectroscopy (1)
- Fabry-Pérot-Resonator (1)
- Facette (1)
- Facettierung (1)
- Fachdidaktik (1)
- Faraday-Effekt (1)
- Farbzentrum (1)
- Faser (1)
- Faserorientierung (1)
- Fatigue (1)
- Fe3O4 (1)
- FeSi (1)
- Felddetektion (1)
- Femtochemie (1)
- Femtochemistry (1)
- Femtosecond Dynamics (1)
- Femtosecond Laser Pulse Shaping (1)
- Femtosecond Pulse Shaping (1)
- Femtosecond dynamics (1)
- Femtosekunden (1)
- Femtosekunden Dynamik (1)
- Femtosekunden Pulsformung (1)
- Femtosekunden-Laserpulsformung (1)
- Femtosekunden-Laserspektroskopie (1)
- Femtosekundendynamik (1)
- Femtosekundenpulse (1)
- Femtosekundenspektroskopie (1)
- Fermiverteilung (1)
- Ferroelektrikum (1)
- Ferromagnet (1)
- Ferromagnetische Heterostruktur (1)
- Ferromagnetism (1)
- Festkörperspektroskopie (1)
- Festkörpersupport (1)
- Feuchte (1)
- Fiber Orientation (1)
- Field Effect Transistor (1)
- Finite Element Simulationen (1)
- Finite Element Simulations (1)
- Finite-Elemente-Methode (1)
- Flavor Violation (1)
- Flugzeit (1)
- Fluorescence imaging with one nanometer accuracy (1)
- Fluoreszenzkorrelationsspektroskopie (1)
- Fluoreszenzlebensdauer-Mikroskopie (1)
- Fluoreszenzlöschung (1)
- Fluoreszenzmikroskopie (1)
- Fluorophore (1)
- Flussbildgebung (1)
- Flussleiter (1)
- Flüssiger Zustand (1)
- Flüstergaleriemode (1)
- Formaldehyd (1)
- Fortran code (1)
- Fotodetektor (1)
- Fotodetektoren (1)
- Fotophysik (1)
- Fourier-transform infrared spectroscopy (1)
- Fourier-transform spectral interferometry (1)
- Fourier-transform spectroscopy (1)
- Fragmentationsenergie (1)
- Freies Molekül (1)
- Frequenzverdopplung (1)
- Fresnel-Zonenplatte (1)
- Fulleren (1)
- Fullerenderivate (1)
- Functional magnetic resonance imaging (1)
- Functional-NMR Tumor Oxygenation Perfusion Simulation (1)
- Funktionelle NMR-Tomographie (1)
- G8 Bayern (1)
- GAAS (1)
- GAMMA (1)
- GMR (1)
- GaAs/AlGaAs Heterostruktur (1)
- GaAs/AlGaAs heterostructure (1)
- GaAs/Luft-Braggspiegel (1)
- GaAsSb (1)
- GaInNAs (1)
- GaSb (1)
- GaSb/AlAsSb (1)
- GaSb/InAs (1)
- Gallium (1)
- Gallium Manganese Arsenide (1)
- Galliumarsenid-Feldeffekttransistor (1)
- Galliumphosphid (1)
- Gamma (1)
- Gamma-Burst (1)
- Gammablitze (1)
- Gas mixtures (1)
- Gasadsorption (1)
- Gasanalyse (1)
- Gasdruck (1)
- Gaseous Hydrocarbons (1)
- Gaseous detectors (1)
- Gasförmige Kohlenwasserstoffe (1)
- Gasgemisch (1)
- Gasphase (1)
- Gauge bosons (1)
- Gefügekunde (1)
- Gene-expression (1)
- Generation (1)
- Geräuschminderung (1)
- Gewebecharakterisierung (1)
- Giantmagnetoresistance (1)
- Gitterdynamik (1)
- Gittersimulator (1)
- Glatter Krallenfrosch (1)
- Gluon (1)
- Gluon Fusion (1)
- Glycin Peptide (1)
- Glykosylierung (1)
- Gradientensystem (1)
- Gradients (1)
- Graphische Darstellung (1)
- Gravitons (1)
- Grenzflächenchemie (1)
- Grenzflächeneigenschaften (1)
- Grenzflächenleitfähigkeit (1)
- Grenzflächenphysik (1)
- Grenzschicht (1)
- Gunnarsson Schönhammer (1)
- H2Pc (1)
- HARPES (1)
- HE-3 diffusion MRI (1)
- HHG (1)
- HIGGS (1)
- HOMOGENIZED (1)
- HPc (1)
- HREELS (1)
- HRTEM (1)
- Hadron Collider (1)
- Hadron-hadron interactions (1)
- Haftungstest (1)
- Halb-Heusler Legierung NiMnSb (1)
- Halbleiterbauelement (1)
- Halbleiterdiode (1)
- Halbleiterheterostrukturen (1)
- Halbleitersubstrat (1)
- Halbleiter‐Laser (1)
- Halbmetalle (1)
- Half Heusler alloy NiMnSb (1)
- Hard X-ray Angle Resolved Photoemission (1)
- Hard scattering (1)
- Harmonische (1)
- Harte Röntgenstrahlung (1)
- Hartmannsensor (1)
- Heavy-Particles (1)
- Heißes Elektron (1)
- Helimagnetism (1)
- Hemisphärische Kavität (1)
- Hemodynamics (1)
- Herz-MRT (1)
- Herzbildgebung (1)
- Herzschlag (1)
- Herzshuntdiagnostik (1)
- Heteroepitaxie (1)
- Heteroorganische Monolage (1)
- Heterostructure Growth (1)
- Heterostrukturen (1)
- Hg(1-x)Cd(x)Te (1)
- Hg1-xCdxTe (1)
- Hierarchy problem (1)
- Higgs boson decays (1)
- Higgs boson mass (1)
- Higgs physics (1)
- Higgy-Boson (1)
- High-Energies (1)
- High-Harmonic Generation (1)
- High-Z Oxides (1)
- High-order Harmonic Generation (1)
- Hitzdrahtverfahren (1)
- Hochfeld-NMR (1)
- Hochgeordnete Monolagen (1)
- Hochgeschwindigkeitskinematographie (1)
- Hochmagnetfeld (1)
- Hochtemperatur-Wärmeisolation (1)
- Hofmeister (1)
- Hofmeister-Serie (1)
- Hohe Harmonisch Generation (1)
- Hohe Harmonische (1)
- Hohen-Harmonischen Erzeugung (1)
- Hohlfaser (1)
- Holstein model (1)
- Holstein-Modell (1)
- Hordeum vulgare (1)
- Hot electron (1)
- Hubbard model (1)
- Hubbard-Modell (1)
- Human brain (1)
- Husimi (1)
- Hybridbildgebung (1)
- Hypertonic (1)
- Hypothetical particle physics models (1)
- Hämodynamik (1)
- Hüftkopfnekrose (1)
- IG-FET (1)
- II-IV Halbleiter (1)
- II-VI Semiconductors (1)
- II-VI heterostructures (1)
- II-VI-semiconductor (1)
- II-VI-semiconductors (1)
- III - V Halbleiter (1)
- III - V semiconductors (1)
- III-V semiconductor quantum dot (1)
- III–V semiconductor devices (1)
- IPES (1)
- IR-TrueFISP (1)
- ITO (1)
- Identität (1)
- Image Reconstruction (1)
- Images (1)
- Imaging (1)
- Imaging spin-filter (1)
- Impaktversuche (1)
- Impedance Spectroscopy (1)
- Impedanzspektroskopie (1)
- Implantat (1)
- Impulsformung (1)
- Impulslaserbeschichten (1)
- Impulsmikroskopie (1)
- In situ (1)
- In vivo (1)
- In-vivo (1)
- InAs/GaAs Quantenpunkte (1)
- InAs/GaAs quantum dots (1)
- Incommensurate spin structure (1)
- Indium (1)
- Infarct Zone (1)
- Infarkt (1)
- Infektionsbildgebung (1)
- Information (1)
- Infrarot (1)
- Infrarotemission (1)
- Infrarotspektroskopie (1)
- Inhomogeneities (1)
- Inhomogenität (1)
- Inkommensurable Zykloide (1)
- Insulating thin films (1)
- Insulator surfaces (1)
- Integrated circuit (1)
- Integriert-optisches Bauelement (1)
- Integriertes Lernen (1)
- Interband cascade lasers (1)
- Interesse (1)
- Interface Conductivity (1)
- Interface physics (1)
- Interferenz <Physik> (1)
- Intersubband-Resonanz (1)
- Intrinsic charm (1)
- Inverse Photoemission (1)
- Inverse Photoemissions (1)
- Inverse Probleme (1)
- Inversion Recovery (1)
- Inversion Symmetry Breaking (1)
- Inversionsasymmetrische Halbleiter (1)
- Ionization (1)
- Iridate (1)
- Iron Oxide Nanoparticle (1)
- Iron-oxide (1)
- Iron-uptake (1)
- Irradiation (1)
- Isaac (1)
- Ischämie (1)
- Isomerisierungsreaktion (1)
- Isomerization (1)
- Jaynes-Cummings ladder (1)
- Jena / Institut fuer Optik und Quantenelektronik Jena (1)
- Jet Prodution (1)
- Josephson effect (1)
- Josephson junction (1)
- Josephson junctions (1)
- Josephson-Kontakt (1)
- K* µ+μ− (1)
- KR (1)
- KTaO3 (1)
- KWIC (1)
- Kalium (1)
- Kantenzustand (1)
- Kapazität (1)
- Kardio-MRT (1)
- Kationische Lipidbilayer (1)
- Kavitation (1)
- Keramikfaser (1)
- Keramischer Werkstoff (1)
- Kern-Schale-Struktur (1)
- Kernspinrelaxation (1)
- Kernspintomograph (1)
- Kinematik (1)
- Kirchhoff's law (1)
- Knochen (1)
- Knochenstruktur (1)
- Knochenzement (1)
- Koadsorbat (1)
- Kohaerente Optik (1)
- Kohlenwasserstoffsensorik (1)
- Kohärente 2D Spektroskopie (1)
- Kohärente Anregung (1)
- Kohärente Optik (1)
- Kollektivanregung (1)
- Kollektive Anregung (1)
- Kolloider Halbleiter (1)
- Kondensation (1)
- Kondensierte Materie (1)
- Kondo (1)
- Kondo-Modell (1)
- Kondo-System (1)
- Kongreß (1)
- Konjugierte Polymere (1)
- Kontamination (1)
- Kontrollierte Wirkstofffreisetzung (1)
- Kooperatives Lernen (1)
- Koppler (1)
- Kopplung von Festkörper- und Gaswärmeleitung (1)
- Koronarperfusion (1)
- Korrelation (1)
- Kosmische Strahlung (1)
- Krach (1)
- Kraft (1)
- Kraftmessung (1)
- Kristall (1)
- Kristallfläche (1)
- Kristalloberfläche (1)
- Kristallwachstum (1)
- Kristallzüchtung (1)
- Künstliche Synapsen (1)
- LAALO3/SRTIO3 interfaces (1)
- LC-Oszillator (1)
- LDOS (1)
- LED (1)
- LHS (1)
- LaAlO3 (1)
- LaAlO3/SrTiO3 (1)
- LaAlO\(_3\)/SrTiO\(_3\) (1)
- LaVO3 (1)
- Laborgerät (1)
- Labormikroskopie (1)
- Ladungsdichtewelle (1)
- Ladungslokalisierung (1)
- Ladungsträger (1)
- Ladungsträgergenerierung (1)
- Ladungsträgerrekombination (1)
- Landau-Niveau (1)
- Lanthanoxid (1)
- Lanthantitanate (1)
- Large detector systems for particle and astroparticle physics (1)
- Laser absorption spectroscopy (1)
- Laserablation (1)
- Laserabsorptionspektroskopie (1)
- Laserarray (1)
- Laserchemie (1)
- Lasererzeugtes Plasma (1)
- Laserspektroskopie (1)
- Laserverstaerker (1)
- Laserverstärker (1)
- Lasing (1)
- Latentwärmespeicher (1)
- Lattice Light-Sheet (1)
- Lautstärkereduktion (1)
- Lead-free double perovskite (1)
- Leerlaufspannung (1)
- Legierungs-Hubbard-Modell (1)
- Legionella (1)
- Legionella pneumophila (1)
- Legionellen (1)
- Legionärskrankheit (1)
- Lehr-Lern-Forschung (1)
- Lehr-Lern-Labor (1)
- Lehramt (1)
- Lehramtsstudierende (1)
- Lehramtsstudium (1)
- Lehranalyse (1)
- Lehrerbildung (1)
- Leistungsverstärkung (1)
- Lepton (1)
- Leptonic (1)
- Leptons (1)
- Lernerfolg (1)
- Lernvideos (1)
- Lesions (1)
- Licht Materie Wechselwirkung (1)
- Lichtinduzierter Effekt (1)
- Lichtwellenleiter (1)
- Light-Matter-Interaction (1)
- Light-Sheet (1)
- Lipid (1)
- Lipidmembran (1)
- Liquid AR (1)
- Lithografie <Halbleitertechnologie> (1)
- Lithographie <Halbleitertechnologie> (1)
- Lithography (1)
- Localization Microscopy (1)
- Localized states (1)
- Lock Locker (1)
- Logic Gate (1)
- Logisches Gatter (1)
- Lokales Wachstum (1)
- Long-range order (1)
- Low energy electron microscopy LEEM (1)
- Low temperature effects (1)
- Low-Dimensional Electron Systems (1)
- Low-dimensional molecular metals (1)
- Low-e (1)
- Luminescence (1)
- Lumineszenzdiode (1)
- Lumineszenzlöschung (1)
- Lung Function (1)
- Lung Imaging (1)
- Lung cancer (1)
- Lungenbildbgebung (1)
- Lungenfunktionsprüfung (1)
- Lungenkrebs (1)
- Luttinger liquide (1)
- Lärm (1)
- Lärmbelastung (1)
- MIR spectroscopy (1)
- MIR-Spektroskopie (1)
- MPGD (1)
- MPI (1)
- MPS (1)
- MR guidance (1)
- MR imaging (1)
- MR microscopy (1)
- MR-MPI-Tomograph (1)
- MR-imaging (1)
- MRI criteria (1)
- MRI reporter (1)
- MRS (1)
- MRT der Lunge (1)
- MU-M (1)
- Ma (1)
- Macroscopic transport (1)
- Magnesiumphosphat (1)
- Magnesiumphosphate (1)
- Magnetfeld-Wechselwirkung (1)
- Magnetfeldsensor (1)
- Magnetic Resonance (1)
- Magnetic Resonance Relaxometry (1)
- Magnetic properties of thin films interfaces (1)
- Magnetic-resonance (1)
- Magnetisch (1)
- Magnetische Anisotropien (1)
- Magnetische Anregung (1)
- Magnetische Halbleiter (1)
- Magnetische Suszeptibilität (1)
- Magnetischer Sensor (1)
- Magnetisierung (1)
- Magneto-Electric Effect (1)
- Magneto-Elektrischer Effekt (1)
- Magneto-optik (1)
- Magneto-optische Eigenschaften (1)
- Magnetoelectric effect (1)
- Magnetometrie (1)
- Magnetometry (1)
- Magnetoresistance (1)
- Magnetpartikelspektroskopie (1)
- Magnetresonanz-Relaxometrie (1)
- Magnetresonanzbildgebung (1)
- Magnetresonanzmikroskopie (1)
- Magnetsensor (1)
- Magnetspule (1)
- Magnetteilchen (1)
- Mahlprozess (1)
- Mais (1)
- Majorana bound state (1)
- Majorana-Nullmoden (1)
- Malaria (1)
- Malignant effusion (1)
- Manganese Silicide (1)
- Manganesesilicide (1)
- Manganion (1)
- Mangansilizid (1)
- Maske (Halbleitertechnologie) (1)
- Mass Spectrum (1)
- Massenspektrometrie (1)
- Massenspektroskopie (1)
- Materialanalytik (1)
- Materials science (1)
- Matter (1)
- Measurement (1)
- Measuring masses (1)
- Mechanik (1)
- Medicine (1)
- Medizin (1)
- Mehrfach-Solarzelle (1)
- Mehrphotonen-Spektroskopie (1)
- Membranschwingung (1)
- Membranspannung (1)
- Membranviskosität (1)
- Memkondensator (1)
- Meniere’s disease (1)
- Mercury Telluride (1)
- Mercury telluride (1)
- Mesoskopischer Transport (1)
- Mesoskopisches System (1)
- Metall (1)
- Metall-Halbleiter-Kontakt (1)
- Metallcluster (1)
- Metallimplantat (1)
- Metalloxide (1)
- Metallschicht (1)
- Metamaterial (1)
- Methanol (1)
- Metrologie (1)
- Mexico City (1)
- Micelle (1)
- Micro-Hall Magnetometry (1)
- Micro-SQUID (1)
- Microcavities (1)
- Microcavity (1)
- Microcavity devices (1)
- Microresonator (1)
- Microscopy (1)
- Microstructure Modelling (1)
- Microstructure–Property–Relationship (1)
- Mid-infrared photoluminescence (1)
- Mie-Streuung (1)
- Mikro-SQUID (1)
- Mikrocomputertomographie (1)
- Mikrofertigung (1)
- Mikrohallmagnetometrie (1)
- Mikrokavitäten (1)
- Mikrolaser (1)
- Mikroporosität (1)
- Mikroskop (1)
- Mikroskopische Technik (1)
- Mikrospektralanalyse (1)
- Mikrostrukturmodellierung (1)
- Mikrostruktur–Eigenschafts–Korrelationen (1)
- Mikrosystemtechnik (1)
- Mikrotubulus (1)
- Millimeterwelle (1)
- Mischkristall (1)
- Missing Energy (1)
- Mn)As" (1)
- MnSi (1)
- Mode propagation (1)
- Model Based Reconstruction Algorithms in Magnetic Resonance Imaging (1)
- Modellbasierte-Rekonstruktionsalgorithmen in der Magnetresonanztomografie (1)
- Modellbildung (1)
- Moden (1)
- Modenpropagation (1)
- Modulation (1)
- Moelucar beam epitaxy (1)
- Molecular Physics (1)
- Molecular and Optical Physics (1)
- Molecular beam Epitaxy (1)
- Molecular beam epitxy (1)
- Molekularbewegung (1)
- Molekulare Sonde (1)
- Molekularelektronik (1)
- Molekularer Schalter (1)
- Molekularstrahl Epitaxie (1)
- Molekülkontakte (1)
- Molekülorbital (1)
- Molekülspektroskopie (1)
- Molekülsymmetrie (1)
- Molekülzustand (1)
- Momentum- and spin-resolved hard X-ray photoelectron spectroscopy (1)
- Monolage (1)
- Monolayer (1)
- Monte Carlo simulation (1)
- Monte-Carlo-Simulation (1)
- Motivation (1)
- Mott Transistion (1)
- Mott insulator (1)
- Mott-Schottky Analyse (1)
- Mott-Übergang (1)
- Mott–Schottky analysis (1)
- Mouse (1)
- Mouse models (1)
- Multiferroika (1)
- Multimedia (1)
- Multimode-Laser (1)
- Multiple-Scattering (1)
- Multiproteinkomplex (1)
- Muon spectrometers (1)
- Muskelfaser (1)
- Mustervergleich (1)
- Myokardiale Perfusion (1)
- Myokardiale T1ρ-Quantifizierung (1)
- Myon (1)
- NEXAFS spectroscopy (1)
- NIR OLED (1)
- NIXSW (1)
- NLO QCD (1)
- NMR-Imaging (1)
- NMR-Mammographie (1)
- NMR-Spektrometer (1)
- NMR-microscopy (1)
- NMR-spectroscopy (1)
- NNLO (1)
- NSCLC (1)
- Nahfeld Optik (1)
- Nano-Optik (1)
- Nanoantenne (1)
- Nanodot-Speicher (1)
- Nanolithografie (1)
- Nanooptic (1)
- Nanooptics (1)
- Nanoparticles (1)
- Nanoporöser Stoff (1)
- Nanosonde (1)
- Nanostructure (1)
- Nanostructures (1)
- Nanotechnologie (1)
- Nanowires (1)
- Natrium-23 (1)
- Natriumhydroxid (1)
- Natur und Technik (1)
- Natur und Technikunterricht (1)
- Navigator (1)
- Netzwerk (1)
- Neue Physik (1)
- Neuroinformatik (1)
- Neuronale Netzwerke (1)
- Neutrino Mass (1)
- Neutrino detectors (1)
- Neutronenstreuung (1)
- New Small Wheel (1)
- New physics (1)
- Newton (1)
- Nicht-Transparente Medien (1)
- Nicht-kartesische Bildgebung (1)
- Nicht-kleinzelliges Bronchialkarzinom (1)
- Nichtflüchtiger Speicher (1)
- Nichtlineare Optik (1)
- Nichtunterscheidbarkeit (1)
- Niederdimensionale Molekulare Metalle (1)
- Niere (1)
- Nitride (1)
- Non-Cartesian Imaging (1)
- Non-Hermitian skin effect (1)
- Non-transparency (1)
- Nonlinear Dynamics (1)
- Nuclear (1)
- Nuclear Modification (1)
- Näherungsverfahren (1)
- OFET (1)
- OLEDs (1)
- OSI (1)
- Oberflächenanalyse (1)
- Oberflächenchemie (1)
- Oberflächenlegierung (1)
- Oberflächenphonon (1)
- Oberflächenplasmon (1)
- Oberflächenplasmonen (1)
- Oberflächenpräparation (1)
- Oberflächenröntgenbeugung (1)
- Oberflächenspannung (1)
- Oil (1)
- Oncolytic virotherapy (1)
- Onedimensional (1)
- Optical Spectroscopy (1)
- Optimale Kontrolle (1)
- Optische Anisotropie (1)
- Optische Antennen (1)
- Optisches Filter (1)
- Orbital (1)
- Orbital Angular Momentum (1)
- Orbitaltomographie (1)
- Ordered metal adsorbates on semiconductor surfaces (1)
- Ordnungs-Unordnungs-Umwandlung (1)
- Organic Light Emitting Diode (1)
- Organic Photovoltaic (1)
- Organic Photovoltaics (1)
- Organic Solar Cells (1)
- Organic and hybrid semiconductors (1)
- Organic semiconductors (1)
- Organik (1)
- Organik-Metall Grenzflächen (1)
- Organische Dünnschichten (1)
- Organische Leuchtdioden (1)
- Organische Moleküle (1)
- Organische Solarzellen (1)
- Organische Verbindungen (1)
- Organischer Stoff (1)
- Oxid (1)
- Oxide (1)
- Oxide Heterostructure (1)
- Oxidhalogenide (1)
- Oxygenierung (1)
- P(P) over-bar collisions (1)
- P(P)over-bar collicions (1)
- P123 (1)
- P3HT (1)
- PB-PB Collisions (1)
- PCM (1)
- PLD (1)
- PP Collicions (1)
- PP Collisions (1)
- PP collisions (1)
- PPB Collisions (1)
- PT-Transformation (1)
- PUMP (1)
- PWV (1)
- Paarpotentiale (1)
- Pair Prodution (1)
- Pair-Production (1)
- Paneel (1)
- Papier-Solarzelle (1)
- Parallel imaging (1)
- Paramagnetic resonance (1)
- Parametric down-conversion (1)
- Partib distributions (1)
- Particle accelerators (1)
- Particle correlations & fluctuations (1)
- Particle dark matter (1)
- Particle physics (1)
- Particle production (1)
- Particle properties (1)
- Particle tracking detectors (Gaseous detectors) (1)
- Particles (1)
- Parton Ditributions (1)
- Patientenkomfort (1)
- Patron distributions (1)
- Pattern Matching (1)
- Pattern recognition (1)
- PbSnSe (1)
- Peierls-Übergang (1)
- Pentacen (1)
- Peptide (1)
- Perfluorkarbon (1)
- Performance of High Energy Physics Detectors (1)
- Perfusionsmessung (1)
- Perowskite (1)
- Perowskit‐Halbleiter (1)
- Perowskit‐Solarzellen (1)
- Perturbative QCD (1)
- Pfadintegral (1)
- Pflanzenbildgebung (1)
- Pflanzengewebe (1)
- Phase-encoding (1)
- Phased (1)
- Phasen-Kodierung (1)
- Phasendynamik (1)
- Phasenkohärenz (1)
- Phasenkontrastverfahren (1)
- Phasenraumdarstellung (1)
- Phasenschieber (1)
- Phasenumwandlung (1)
- Phenol-Formaldehyd-Kondensationsprodukt (1)
- Phonon (1)
- Phosphor-31-NMR-Spektroskopie (1)
- Photoanregung (1)
- Photocurrent (1)
- Photodetektor (1)
- Photoemission electron microscopy PEEM (1)
- Photoemission spectroscopy (1)
- Photoemissionselektronenmikroskopie (1)
- Photofragmentation (1)
- Photoisomerisation (1)
- Photoisomerization (1)
- Photolumineszenz Quenching (1)
- Photon detectors for UV, visible and IR photons (vacuum) (1)
- Photonic crystals (1)
- Photonik (1)
- Photons (1)
- Photophysics (1)
- Photophysik (1)
- Photoviltaics (1)
- Phthalocyanine (1)
- Physical Sciences (1)
- Physical sciences (1)
- Physikalische Charakterisierung (1)
- Physikalische Schicht (1)
- Physikalische Zeit (1)
- Physikdidaktik (1)
- Physioloische MRT (1)
- Plasmon propagation (1)
- Plasmonen (1)
- Plasmonics (1)
- Plasmonik (1)
- Plastic electronics (1)
- Pluronic (1)
- Plus (1)
- Plus Plus (1)
- Polarer Halbleiter (1)
- Polarisation (1)
- Polarisationspulsformung (1)
- Polarisiertes Licht (1)
- Polariton-Kondensation (1)
- Polariton-Laser (1)
- Polymerhalbleiter (1)
- Polymerlösung (1)
- Porengröße (1)
- Positionierte Quantenpunkte (1)
- Positionierung (1)
- Predictions (1)
- Production Cross-Section (1)
- Production cross-section (1)
- Professionelle Unterrichtswahrnehmung (1)
- Programm (1)
- Proteins (1)
- Proton-Lead (1)
- Proton-Proton- Collisions (1)
- Proton-Proton-Streuung (1)
- Protonen-NMR-Spektroskopie (1)
- Protons (1)
- Prototype (1)
- Prozessierung (1)
- Präbolus (1)
- Präpolarisationssystems (1)
- Präzisionsmessung (1)
- Pseudorapidity (1)
- Pt (1)
- Pulmonary function (1)
- Pulse Shaping (1)
- Pulse shaping (1)
- Pulsed laser deposition (1)
- Pulswelle (1)
- Pulswellengeschwindigkeit (1)
- Pulver (1)
- Pumpen <Laser> (1)
- Purcell-Effekt (1)
- Pyrolyse (1)
- Pyrometrie (1)
- Q2DEG (1)
- QA-Methode (1)
- QCD Corrections (1)
- QKD (1)
- QTL mapping (1)
- QW interface profile (1)
- Quanten anomalen Hall-Effekt (1)
- Quanten-Dash (1)
- Quanten-Kontrolle (1)
- Quanten-Monte-Carlo (1)
- Quanten-Spin-Hall-Effekt (1)
- Quantenelektrodynamik (1)
- Quantenfilm (1)
- Quantenkryptologie (1)
- Quantenoptik in Halbleitersystemen (1)
- Quantensensor (1)
- Quantensensorik (1)
- Quantenspinsystem (1)
- Quantentransport (1)
- Quantentrogzustände (1)
- Quantenwell-Laser (1)
- Quantum Control (1)
- Quantum Plasmonics (1)
- Quantum Spin Hall Effect (1)
- Quantum Well (1)
- Quantum Well States (1)
- Quantum chromodynamics (1)
- Quantum chronodynamics (1)
- Quantum confined Stark effect (1)
- Quantum electrodynamics (1)
- Quantum optics with artificial atoms (1)
- Quantum well (1)
- Quantum wells (1)
- Quantum-well, -wire and -dot devices (1)
- Quantumwire (1)
- Quark (1)
- Quark pair procuction (1)
- Quarkonium Production (1)
- Quarks (1)
- Quasi-1D Elektronensysteme (1)
- Quasi-eindimensionale Organische Metalle (1)
- Quasiparticle Lifetime (1)
- Quasiteilchen-Lebensdauer (1)
- Quasiteilcheninterferenz (1)
- RAKI (1)
- RECOLA (1)
- REELS (1)
- RF Coil arrays (1)
- RF Coils (1)
- RMnO3 (1)
- RNA-SEQ (1)
- RTD (1)
- Radial Imaging (1)
- Radiale Bildgebung (1)
- Radiation calculations (1)
- Radiative-corrections (1)
- Radikalanionensalz (1)
- Radiologische Diagnostik (1)
- Ramanspektroskopie (1)
- Rapid Prototyping (1)
- Rare earth manganites (1)
- Rashba (1)
- Rashba-Splitting (1)
- Rastermikroskop (1)
- Rastertunnelspektoskopie (1)
- Rats (1)
- Reaction kinetics and dynamics (1)
- Reaktionskinetik (1)
- Real-time MRI (1)
- Recombination Dynamics (1)
- Reduction (1)
- Reflexion <Physik> (1)
- Reflexionsgeometrie (1)
- Regimes (1)
- Regionales Blutvolumen (1)
- Registrierung <Bildverarbeitung> (1)
- Relaxation Parameter Mapping in Magnetic Resonance Imaging (1)
- Relaxographie (1)
- Relaxography (1)
- Renewable energies (1)
- Repräsentation (1)
- Repulsion of organic molecules (1)
- Repulsion organischer Moleküle (1)
- Resonante Tunneldioden (1)
- Resonanztunneldiode (1)
- Resonator (1)
- Resonatoren (1)
- Resonators (1)
- Resorcin (1)
- Retrospective Motion Compensation (1)
- Retrospektive Bewegungskorrektur (1)
- Ringresonator (1)
- Rissbildung (1)
- Rissverlauf (1)
- Root s=7 (1)
- Root-S=13 TEV (1)
- Rotary EXcitation (REX) (1)
- Rotary Excitation (1)
- Ru(0001) (1)
- Ruthenium (1)
- Röngenbeugung (1)
- Röntgen-Weitwinkelstreuung (1)
- Röntgendetektor (1)
- Röntgendichroismus (1)
- Röntgenzirkulardichroismus (1)
- SANS (1)
- SARPES (1)
- SAXS (1)
- SEM (1)
- SENSE (1)
- SET (1)
- SET-Transistor (1)
- SHERPA (1)
- SMART (1)
- SQUID (1)
- SRTIO3 (1)
- STED-Mikroskopie (1)
- STO (1)
- STXM (1)
- SUSHI (1)
- Salmonella-typhimurium (1)
- Salzlösung (1)
- San Diego <Calif. (1)
- Saphir (1)
- Saturation (1)
- Sauerstoff (1)
- Sauerstoffbegasung (1)
- Sauerstofffehlstellen (1)
- Sb2Te3 (1)
- Scaffold fabrication (1)
- Scale (1)
- Scanning tunneling microscopy (1)
- Schattenmaske (1)
- Schichtsysteme (1)
- Schottky-Kontakt (1)
- Schwache Kopplung (1)
- Schwingungsphase (1)
- Schwingungszustand (1)
- Schüleraktivierung (1)
- Schülerversuch (1)
- Schülervorstellungen (1)
- Seeds (1)
- Sel-MQC (1)
- Selbst-Kalibrierung (1)
- Selbstbild (1)
- Selbstenergie (1)
- Selbstkonzept (1)
- Selbstnavigation (1)
- Self-assembly (1)
- Self-navigation (1)
- Self-organization (1)
- Seltene Erden (1)
- Seltenerdverbindungen (1)
- Semiconductor heterostrctures (1)
- Semiconductor laser (1)
- Semiconductors physics (1)
- Sendedioden (1)
- Sequenzentwicklung (1)
- Shapiro (1)
- Shockley–Read–Hall (1)
- Showers (1)
- Signal Formation (1)
- Silicium (1)
- Silicium Fehlstelle (1)
- Siliciumdioxid (1)
- Siliciumhalbleiter (1)
- Siliciumvakanz (1)
- Silicon Carbide (1)
- Silicon vacancy (1)
- Siliconsuboxide (1)
- Siliziumkarbid (1)
- Simulation methods and programs (1)
- Simultanbildgebung (1)
- Single Molecule Imaging (1)
- Single Molecule Localization Microscopy (1)
- Single Photon Sources (1)
- Single electron transfer (1)
- Single photon emission (1)
- Single-Molecule Transistor (1)
- Single-Photon (1)
- Single-Photon Detectors (1)
- Singlet Fission (1)
- Skalierung (1)
- Skyrmion (1)
- SmB\(_{6}\) (1)
- Soft matter (1)
- Soft-tissue infection (1)
- Sol-Gel-Prozess (1)
- Sol-Gel-Synthese (1)
- Solar Cell (1)
- Solar cell (1)
- Solar energy (1)
- Solar-Cell (1)
- Solartechnik (1)
- Sorption (1)
- Soybean seeds (1)
- Spatially resolved 2D spectroscopy (1)
- Spectroscopy (1)
- Speicher (1)
- Speicherelement (1)
- Speichertransistor (1)
- Spektrale Editierung (1)
- Spektrale Interferenz (1)
- Spektrales Lochbrennen (1)
- Spektromikroskopie (1)
- Spektroskopische Bildgebung (1)
- Spektroskopische Flussmessung (1)
- Spezifische Wärme (1)
- Spin Defekt (1)
- Spin Drehmoment (1)
- Spin Relaxation (1)
- Spin-Bahn-Kopplung (1)
- Spin-Echo (1)
- Spin-Hall-Effekt (1)
- Spin-Injektion (1)
- Spin-LED (1)
- Spin-Ladungs-Umwandlung (1)
- Spin-Lock (1)
- Spin-Orbit Coupling (1)
- Spin-Orbit-Torque (1)
- Spin-Phonon Kopplung (1)
- Spin-Polarisation (1)
- Spin-Transfer-Drehmoment (1)
- Spin-eins-System (1)
- Spin-orbit coupling (1)
- Spin-phonon coupling (1)
- Spindiffusion (1)
- Spindrehmoment Bauteil (1)
- Spinelectronic (1)
- Spinelektronik (1)
- Spinentropie (1)
- Spinflip-Streuung (1)
- Spinkette (1)
- Spinpolarisation (1)
- Spinpolarisierte Rastertunnelmikroskopie, Temperaturabhängige Phasenübergänge (1)
- Spinrelaxation (1)
- Spintronic (1)
- Spinventil (1)
- Spiral imaging (1)
- Spontaneous symmetry breaking (1)
- Sprödbruch (1)
- Spulen (1)
- Spulen-Array (1)
- Sputter deposition (1)
- Stabilisierung (1)
- Standardmodell (1)
- Standardmodell <Elementarteilchenphysik> (1)
- Staphylococcus aureus (1)
- States (1)
- Steifigkeit (1)
- Step Ru surface (1)
- Stiffness (1)
- Stochastische Resonanz (1)
- Storage (1)
- Stoßwelle (1)
- Strahlungskopplung (1)
- Strain (1)
- Strange Baryon Production (1)
- Strom-Spannungs-Kennlinie (1)
- Stromantwort (1)
- Strong interaction (1)
- Strontiumtitanat (1)
- Strontiumvanadate (1)
- Strukturbestimmung (1)
- Strukturbildung (1)
- Student-Lab (1)
- Störstelle (1)
- Störstellenverteilung (1)
- Subject (1)
- Suboxid (1)
- Subwavelength structures (1)
- Sugar-transport (1)
- Supercapacitor (1)
- Superconductor (1)
- Superkondensator (1)
- Superparamagnetic Iron Oxide (1)
- Superparamagnetische Eisenoxid Kontrastmittel (1)
- Superpartners (1)
- Superprisma (1)
- Superradiance & subradiance (1)
- Supersymmetrie (1)
- Supraleiter 2. Art (1)
- Surface (1)
- Surface Raman spectroscopy (1)
- Surface plasmon (1)
- Symmetrie (1)
- Symmetries (1)
- Systembau (1)
- Systems (1)
- Systole (1)
- T1 Relaxation (1)
- T1 quantification (1)
- T1-Relaxtion (1)
- T1-Wichtung (1)
- T1-mapping (1)
- T2* (1)
- T2*-Relaxation (1)
- TCSPC (1)
- TGRAPPA (1)
- THz (1)
- TI (1)
- TOSSI (1)
- TSC (1)
- TTF (1)
- TT\(_{1rho}\) mapping (1)
- T\(_{1P}\) dispersion (1)
- T\(_{1P}\) mapping (1)
- Table-top (1)
- Tageslichtelement (1)
- Tageslichtnutzung (1)
- Talbot–Lau interferometer (1)
- Tamm-Plasmonen (1)
- Tau leptons (1)
- Tauola (1)
- Tautomerisation (1)
- Teilchendetektor (1)
- Telekommunikation (1)
- Tensor (1)
- Tensor Tomography (1)
- Terahertz (1)
- Terahertz spectroscopy (1)
- Teststand (1)
- Theorie (1)
- Therapy (1)
- Thermodynamik (1)
- Thermoelektrischer Effekt (1)
- Thermoelektrischer Generator (1)
- Thermokraft (1)
- Thermometry (1)
- Thin film growth (1)
- Thin intermetallic films (1)
- Thiophen (1)
- Thiophenderivate (1)
- TiOPc (1)
- TiO\(_2\) (1)
- Tieftemperatur-Rastertunnelmikroskopie (1)
- Tieftemperaturphänomene (1)
- Tieftemperaturverhalten (1)
- Time hole (1)
- Time measurement (1)
- Time-domain NMR (1)
- Time-of-flight energy recording (1)
- Time-resolved photoemission electron microscopy (1)
- Time-resolved photoluminescence (1)
- To-leading order (1)
- Tool (1)
- Topolectrics (1)
- Topological Insulator (1)
- Topological Insulators (1)
- Topological insulator (1)
- Topological insulators (1)
- Topological metamaterial (1)
- Topological superconductivity (1)
- Topologische Laser (1)
- Topology (1)
- Trabekel (1)
- Tracking (1)
- Transient Electrical Methods (1)
- Transiente Absorptionsspektroskopie (1)
- Transitzeitmethode (1)
- Transmission <Physik> (1)
- Transmissionsmikroskopie (1)
- Transporteigenschaft (1)
- Transportmessung (1)
- Transverse-Momentum (1)
- Transverse-momentum (1)
- Traveling Wave Magnetic Particle Imaging (1)
- Triangular lattice (1)
- Tribenzotriquinacen (1)
- Triplett (1)
- Triticeae (1)
- Triticum aestivum (1)
- Tumors (1)
- Tunneldioden (1)
- Tunneleffekt (1)
- Tunneling spectroscopy (1)
- Tunnelkontakt (1)
- Tunnelkontakte (1)
- Tunnelspektroskopie (1)
- Turbo Spin-Echos (1)
- Twin Domains (1)
- Twin Suppression (1)
- Two-color pump-probe spectroscopy (1)
- Two-photon absorption (1)
- Two-photon polymerization (1)
- Type II quantum wells (1)
- Type-II quantum well (1)
- U-Wert (1)
- U-value (1)
- UHECR (1)
- URu2Si2 (1)
- UTE (1)
- UV-VIS (1)
- UV-VIS-Spektroskopie (1)
- Ulrakurze Echozeit (1)
- Ultrafast Spectroscopy (1)
- Ultrafast X-Ray Science (1)
- Ultrafast measurements (1)
- Ultrakurze Laserpulse (1)
- Ultrakurzer Lichtpuls (1)
- Ultrakurzzeit Spektroskopie (1)
- Ultrarelativistic Heavy-Ion (1)
- Ultraschnelle Informationsverarbeitung (1)
- Ultraschnelle Röntgenstrahlung (1)
- Ultraschneller Prozess (1)
- Ultrathin Transmission Target (1)
- Undersampling (1)
- Undulation (1)
- Unterabtastung (1)
- Ununterscheidbarkeit (1)
- Uran (1)
- VCAM (1)
- VCSEL (1)
- VEGF (1)
- VIDE (1)
- VIDED (1)
- VIP (1)
- VIS-Spektroskopie (1)
- Vacuum chambers (1)
- Vakuum (1)
- Vakuumisolationspanel (1)
- Vapor-liquid-solid (1)
- Vascular endothelial Growth Factor (1)
- Vcsels (1)
- Vektorboson (1)
- Vektorfeldformer (1)
- Vektorfeldkontrolle (1)
- Verglasung (1)
- Vergleich (1)
- Vergleichsstudie (1)
- Verstärker (1)
- Verstärkung (1)
- Verteilte Bragg-Reflexion (1)
- Vertikalresonator (1)
- Very strong coupling (1)
- Verzerrung (1)
- Videoanalyse (1)
- Viscosity (1)
- Vizinal (1)
- Volkov-Pankratov states (1)
- Volladdierer (1)
- Volume Reconstruction (1)
- Von-Willebrand-factor (1)
- Vortices (1)
- Vulkanologie (1)
- W & Z bosons (1)
- W(110) (1)
- W-Boson (1)
- WW (1)
- Wabengitter (1)
- Wachstum (1)
- Wachstumsprozess (1)
- Wasserfenster (1)
- Wassertransport (1)
- Waste Heat Recovery (1)
- Weak-Interactions (1)
- Weakly interacting massive particles (1)
- Wechselwirkung intensiver Laserpulse mit Materie (1)
- Weiche Materie (1)
- Wiedemann Franz law (1)
- Wiedemann-Franz-Gesetz (1)
- Wigner (1)
- Wigner-Verteilung (1)
- Winkel- und spin-aufgelöste Photoelektronenspektroskopie im harten Röntgenbereich (1)
- Winkelaufgelöste Photoelektronenspektroskopie (1)
- Winkelaufgelöste Photoemission mit harten Röntgenstrahlen (1)
- Winkelaufgelöste Photoemissionspektroskopie (1)
- Winkelaufgelöste Photoemissionsspektroskopie (1)
- Wire chambers (MWPC, Thin-gap chambers, drift chambers, drift tubes, proportional chambers etc) (1)
- Wurzel (1)
- Wärmeschutzverglasung (1)
- Wärmetransport (1)
- Würzburg / Sonderforschungsbereich Erkennung (1)
- X-Ray Dark-Field (1)
- X-ray (1)
- X-ray analysis (1)
- X-ray imaging (1)
- XANES (1)
- XAS (1)
- XPEEM (1)
- XSW (1)
- Xerogel (1)
- Xylem (1)
- Y-Schalter (1)
- YAG-Laser (1)
- Yu-Shiba-Rusinov-Zustände (1)
- Yukawa coupling (1)
- Zahnimplantat (1)
- Zahnmedizin (1)
- Zeitauflösung (1)
- Zerstörungsfreie Werkstoffprüfung (1)
- Zinc oxide (1)
- Zinn-dotiertes Indiumoxid (1)
- Zirkularpolarisation (1)
- ZnMnSe (1)
- ZnO (1)
- ZnSe heterostructure (1)
- ZnSe-Heterostruktur (1)
- ZnTe (1)
- Zwei-Photonen-Photoelektronenspektroskopie (1)
- Zwei-Photonen-Polymerisation (1)
- Zweiphotonen-Photoemissionsspektroskopie (1)
- Zweiphotonenabsorption (1)
- Zwillingsbildung (1)
- Zwischenschicht (1)
- \(\alpha\)-phase (1)
- \(\beta\)-phase (1)
- aberration (1)
- ablation (1)
- acceleration of particles (1)
- accumulation (1)
- acoustic surface plasmon (1)
- active learning (1)
- adaptive Kontrolle (1)
- adaptive Optimierung (1)
- adaptive Pulsformung (1)
- adaptive Quantenkontrolle (1)
- adaptive control (1)
- adaptive optics (1)
- adaptive pulse shaping (1)
- adiabatic modetransission (1)
- adsoption (1)
- adsorption-induced deformation (1)
- aerogel (1)
- aerogels (1)
- agreement (1)
- alloy (1)
- alloy Hubbard model (1)
- aluminum-zinc-oxide (1)
- alveolar (1)
- anatomical (1)
- anatomisch (1)
- anatomy (1)
- angle resolved photo emission spectroscopy (1)
- angle resolved photoemission spectroscopy (1)
- angle-resolved photoelectron spectroscopy (1)
- angle-resolved photoemission (1)
- angle-resolved photoemission spectroscopy (1)
- anorganic (1)
- anorganische geordnete Halbleiter (1)
- antiferromagnet (1)
- antimony (1)
- aorta (1)
- apolipoprotein-E (1)
- applied mathematics (1)
- approximation (1)
- aqueous solution (1)
- array (1)
- arterial elasticity (1)
- artificial synapse (1)
- associated production (1)
- association (1)
- astroparticle physics (1)
- atheriosclerosis (1)
- atmospheric aerosols (1)
- atmospheric chemistry (1)
- atom (1)
- atomar kleine Lücke (1)
- atomic and molecular spectroscopy, (1)
- atomic gases (1)
- atomic-scale gap (1)
- aufdruckbare Solarzellenfarbe (1)
- balanced steady state free precession (1)
- ballistic (1)
- ballistischer Transport (1)
- ballistisches Transport Regime (1)
- barium titanate (1)
- bathophenanthroline (1)
- binding energy (1)
- biochemical assays (1)
- bioelectrochemistry (1)
- biogeochemistry (1)
- biomaterials (1)
- biomedical engineering (1)
- bismuth (1)
- bistabiles Schalten (1)
- bistable switching (1)
- black carbon (1)
- black-blood (1)
- blazars (1)
- blood (1)
- blood flow (1)
- body weight (1)
- bone cement (1)
- bone imaging (1)
- boron (1)
- boron-nitride (1)
- boson (1)
- brain images (1)
- branched flow (1)
- breaking (1)
- bulk heterojunction (1)
- burried interfaces (1)
- calcium fluoride nanoparticles (1)
- calibration and fitting methods (1)
- calorimeter (1)
- camelina-sativa (1)
- cantilever-bending technique (1)
- capability (1)
- capacity (1)
- carbon nanotube (1)
- cardiac MRI (1)
- cardiac imaging (1)
- cardiac shunt (1)
- cardiac ventricles (1)
- cardiovascular system (1)
- carrier density (1)
- carrier transport (1)
- carrier-induced ferromagnetism (1)
- catalysis (1)
- catalyst (1)
- catheter tip (1)
- cationic lipid bilayer (1)
- cavity device (1)
- cavity polaritons (1)
- ce compounds (1)
- cell wall (1)
- central carbon metabolism (1)
- central metabolism (1)
- ceramic fibers (1)
- chalcogenide (1)
- chalcogenides (1)
- characterization (1)
- characterization and analytical techniques (1)
- charge (1)
- charge carrier generation (1)
- charge carrier transport in organic thin films (1)
- charge separation (1)
- charge transfer satellites (1)
- charge transfer state (1)
- charge transport (1)
- charged heavy long-lived particles (1)
- chargino (1)
- chemisorption (1)
- children (1)
- circular polarization (1)
- clinically isolated syndromes (1)
- cluster (1)
- cluster dynamical mean-field theory (1)
- cluster finding (1)
- coconut cocos-nucifera (1)
- coexistence (1)
- coherence (1)
- coherent control (1)
- coherent imaging (1)
- coherent light (1)
- coherent multidimensional spectroscopy (1)
- coherent potential approximation (1)
- coil (1)
- coil-array (1)
- collective excitation (1)
- color centers (1)
- color tuning (1)
- colour flow (1)
- communication (1)
- comparative study (1)
- complex‐valued machine learning (1)
- compound refractive X-ray lenses (1)
- compound semiconductor (1)
- computed tomography (CT) (1)
- condensed matter (1)
- condensed phase (1)
- condensed-matter physics (1)
- conductive hybrid (1)
- confinement (1)
- confocal microscopy (1)
- conjugated polymers (1)
- conjugation (1)
- contact force (1)
- contamination (1)
- contrast-enhanced (1)
- copper (1)
- coronary arteries (1)
- coronene (1)
- correction (1)
- correlated oxides (1)
- correlation (1)
- correlation function (1)
- correlation properties (1)
- cosmic rays (1)
- coulomb coupled quantum dots (1)
- coupler (1)
- coupling of gaseous and solid thermal conduction (1)
- coupling strength (1)
- coupling-constant dependence (1)
- covalent organic framework (1)
- crosslinked coating (1)
- cryo deposition (1)
- cryogenic temperature (1)
- crystal (1)
- crystal growth (1)
- crystalline (1)
- current response (1)
- current-current correlation (1)
- cystic fibrosis (1)
- dark matter (1)
- darkfield imaging (1)
- data augmentation (1)
- daylighting (1)
- decays (1)
- deep learning (1)
- deformation (1)
- delamination (1)
- delocalization (1)
- density functional calculations (1)
- density weighted imaging (1)
- density weighting (1)
- density-functional theory (1)
- dental implant (1)
- detected magnetic-resonance (1)
- developing oilseeds (1)
- developmental signaling (1)
- device arm (1)
- devices (1)
- devices for energy harvesting (1)
- dewatering (1)
- dfb-laser (1)
- diabolical points (1)
- diboson production (1)
- dichteangepasste k-Raum Abtastung (1)
- dielectric oxides (1)
- diffraction (1)
- diffusion tensor imaging (1)
- digital Lock-In (1)
- digitaler Lock-In (1)
- diindenoperylene (1)
- dilatometer (1)
- dilute magnetic semiconductors (1)
- dilute nitride (1)
- diluted magnetic Semiconductor (1)
- diluted magnetic semiconductors (1)
- diode laser (1)
- diphoton decay (1)
- diphoton events (1)
- disease (1)
- dispersion (1)
- distant dipolar field (1)
- distributions (1)
- disturbance (1)
- dot (1)
- downconversion (1)
- dreMR (1)
- dressed states (1)
- droplet epitaxy (1)
- dynamic imaging (1)
- dynamic light scattering (1)
- dynamic-iconic representation (1)
- dynamical mean field (1)
- dynamische Bildgebung (1)
- dynamische Lichtstreuung (1)
- dysfunction (1)
- dünne intermetallische Filme (1)
- e(+)e(-) Collisions (1)
- echo time (1)
- economic growth (1)
- edge states (1)
- eindimensionale Systeme (1)
- electrical excitation (1)
- electrically driven (1)
- electrically triggered (1)
- electrochemistry (1)
- electromagnetic calorimeter (1)
- electromagnon (1)
- electromigration (1)
- electron beam lithography (1)
- electron tunneling (1)
- electron-hole scattering (1)
- electron-vibration coupling (1)
- electronic and spintronic devices (1)
- electronic correlations (1)
- electronic coupling (1)
- electronic phase transitions (1)
- electronic structure of atoms and molecules (1)
- electronic transport (1)
- electronic transport in nanocrystalline materials (1)
- electronics, photonics and device physics (1)
- electrostatics (1)
- electroweak production (1)
- elektrische Anregung (1)
- elektronische Struktur (1)
- embryo (1)
- emphysema (1)
- emulsions (1)
- energetic jet (1)
- energies (1)
- energy storage (1)
- energy-dispersive (1)
- enhanced green fluorescent protein (1)
- ensemble modeling (1)
- entanglement (1)
- envelope function approximation (1)
- environmental sciences (1)
- epitaxial growth (1)
- epitaxial structures (1)
- epr spectroskopy (1)
- evolutionary optimization (1)
- evolutionärer Algorithmus (1)
- exchange (1)
- exciplexes (1)
- excitations (1)
- excited electrons (1)
- exciton binding energy (1)
- exciton blocking layer (1)
- exciton-polariton (1)
- exciton-polariton condensates (1)
- exciton‐polaritons (1)
- experimental and theoretical determination of electron density (1)
- experimental physics (1)
- explanatory videos (1)
- explosive volcanism (1)
- explosiver Vulkanismus (1)
- extrinsic (1)
- extrinsisch (1)
- facet (1)
- faceting (1)
- far-infrared spectroscopy (1)
- fatigue (1)
- femtosecond (1)
- femtosecond laser spectroscopy (1)
- femtosecond pulse shaping (1)
- femtosecond pulses (1)
- fermions (1)
- ferroelectricity (1)
- ferromagnet (1)
- ferromagnetic resonance (1)
- ferromagnetische Halbleiter (1)
- ferromagnetische Resonanz (1)
- ferromagnets (1)
- field free point (FFP) (1)
- field-effect transistor (1)
- films (1)
- flash memory (1)
- floating gate transistor (1)
- flow (1)
- flow dynamics (1)
- flow patterns (1)
- fluorescence (1)
- fluorescence imaging (1)
- fluorescence microscopy (1)
- fluorine (1)
- flux balance analysis (1)
- flux guides (1)
- flüssige Phase (1)
- four-wave mixing (1)
- fourier transform spectroscopy (1)
- fragmentation (1)
- fragmentation energy (1)
- fragmentation functions (1)
- free breathing (1)
- free electron laser (1)
- free respiration (1)
- free space (1)
- frequency combs (1)
- fs (1)
- full adder (1)
- full-field microscopy (1)
- fully hadronic (1)
- functional (1)
- functional magnetic resonance imaging (1)
- funktionell (1)
- funktionelle Lungenbildgebung (1)
- funktionelle MRT (1)
- g-Faktor (1)
- g-Wert (1)
- g-value (1)
- gain (1)
- galaxies: individual: NGC 1275 (1)
- galaxies: jets (1)
- gallium nitride (1)
- gallium phosphide (1)
- gamma gamma channel (1)
- gamma radiation (1)
- gamma-ray bursts (1)
- gamma-rays: galaxies (1)
- gapless Andreev bound states (1)
- gas adsorption (1)
- gasb (1)
- gekoppelte Kavitäten (1)
- geminale Rekombination (1)
- gene alleles (1)
- gene family evolution (1)
- gene-expression data (1)
- geometrische Struktur (1)
- geordnete Metalladsorbate auf Halbleiteroberflächen (1)
- glycine peptides (1)
- grain boundaries (1)
- grand unification (1)
- graphene (1)
- grating interferometer (1)
- grating interferometry (1)
- gravitational waves (1)
- group refractive index (1)
- growth (1)
- guidelines (1)
- h-dimerization (1)
- hadron colliders (1)
- hadronic Recoil (1)
- hadronic decays (1)
- hadronischer Rückstoß (1)
- half-Heusler (1)
- halfmetals (1)
- halogenation (1)
- hard double-patron interactions (1)
- hard x-ray photoemission (1)
- harmonic (1)
- heart rate (1)
- heat conversion (1)
- heat currents (1)
- heating (1)
- heavy fermion insulators (1)
- heralded entanglement (1)
- heterogen (1)
- heterogeneous (1)
- heteromolecular interfaces (1)
- heterorganic monolayer (1)
- heterostructures (1)
- heterotrophic arabidopsis cells (1)
- heterovalent heterointerfaces (1)
- hidden-beauty states (1)
- high contrast (1)
- high energy physics (1)
- high field (1)
- high field MRI (1)
- high field NMR (1)
- high harmonic generation (1)
- high power laser (1)
- high temperature (1)
- high temperature thermal insulation materials (1)
- high transverse momentum jets (1)
- high-energy collider experiment (1)
- high-harmonic generation (1)
- high-intensity laser-matter interaction (1)
- high-order finite element (1)
- high-order harmonic generation (1)
- high-power laser (1)
- high-speed photography (1)
- high-throughput (1)
- histology (1)
- hochauflösende Bildgebung (1)
- hochauflösende Elektronenbeugung (1)
- hole (1)
- hole-burning (1)
- hubbard-model (1)
- hybrid imaging (1)
- hydrocarbons (1)
- hydrogen (1)
- hyperpolarized HE-3 (1)
- illumination (1)
- image processing (1)
- image quality (1)
- image reconstruction (1)
- imaging agents (1)
- imaging and sensing (1)
- imaging techniques (1)
- impact experiments (1)
- impedance spectroscopy (1)
- impurities (1)
- in vivo MR-Spektroscopy (1)
- in-line phase contrast (1)
- in-situ (1)
- inclusive cross section (1)
- inctracellular (1)
- indium phosphide (1)
- indium-tin oxide (1)
- induced (1)
- induced phase transition (1)
- induced superconductivity (1)
- infants (1)
- infarct (1)
- infarction (1)
- infection (1)
- inorganic LEDs (1)
- instrumentation (1)
- insulator (1)
- integral (1)
- integrated circuits (1)
- integrated optics (1)
- interband cascade laser (1)
- interface conductivity (1)
- interface properties (1)
- interfaces (1)
- intermixing (1)
- intermolecular zero-quantum coherence (1)
- interplay of surface states (1)
- intersubband resonance (1)
- intrazellulär (1)
- intrinsic (1)
- intrinsisch (1)
- ion-specific effects (1)
- ionenspezifische Effekte (1)
- iron oxide contrast agent (1)
- iron pnictides (1)
- isomerization (1)
- jet energy scale (1)
- jet production (1)
- jet shapes (1)
- jets (1)
- josephson junction (1)
- kagome lattice (1)
- kardiale MRT (1)
- keV (1)
- keramische Fasern (1)
- kinematics (1)
- kink instability (1)
- komplexe Gitterkopplung (1)
- kondensierte Phase (1)
- konjugiert (1)
- laboratory (1)
- lamellar micelles (1)
- large artery vasculitis (1)
- large optical cavity (1)
- laser (1)
- laser array (1)
- laser physics (1)
- lasers (1)
- lasing (1)
- latent heat (1)
- lead-lead collision (1)
- learning (1)
- lesion size (1)
- lesions (1)
- lifetimes (1)
- lift-off (1)
- light (1)
- light matter coupling (1)
- light scattering and absorption (1)
- light sources (1)
- light-matter interaction (1)
- light–matter interaction (1)
- lineage-specific genes (1)
- linear combination (1)
- lipid biosynthesis (1)
- lipid imaging (1)
- liquid cell (1)
- liquid phase (1)
- liquid-metal-jet (1)
- liquid-metal-jet anode X-ray source (1)
- liquids (1)
- local density (1)
- local supersymmetry (1)
- localized surface plasmon (1)
- lodging resistance; (1)
- long-lived neutral particle (1)
- longitudinal relaxation (1)
- low-emissivity coating (1)
- low-temperature magnetotransport (1)
- low-valent compounds (1)
- mCherry (1)
- magnesium phosphate (1)
- magnetic (1)
- magnetic dopants (1)
- magnetic field relaxation (1)
- magnetic nanoparticles (1)
- magnetic oxide (1)
- magnetic properties (1)
- magnetic resonance imaging (MRI) (1)
- magnetic semiconductors (1)
- magnetic sensor (1)
- magnetic topological insulator (1)
- magnetic-resonance behavior (1)
- magnetische Anisotropie (1)
- magnetization (1)
- magnetized sphere/cylinder (1)
- magneto optics (1)
- magneto-optical properties (1)
- magnetometry (1)
- magnetoresistance (1)
- magnetoresistive effect (1)
- magnetoresistiver Effekt (1)
- magnetotransport (1)
- maize kernels (1)
- mapping function (1)
- maser (1)
- mass spectrocopy (1)
- materials design (1)
- materials science (1)
- matrix element effects (1)
- mbe (1)
- mean-field theory (1)
- mechanic (1)
- mechanical stiffness (1)
- mechanische Steifigkeit (1)
- mechanisms (1)
- medical device (1)
- medical imaging (1)
- melt electrowriting (1)
- membrane tension (1)
- membrane viscosity (1)
- memristive Funktionen (1)
- memristive functions (1)
- mercury (1)
- mesoscopic transport (1)
- mesoskopisch (1)
- mesoskopischer Transport (1)
- metabolism (1)
- metal surfaces (1)
- metal-insulator transition (1)
- metal-organic (1)
- metal-to-insulator transition (1)
- metall-organisch (1)
- metals (1)
- methanofullerenes (1)
- micro cavity (1)
- micro pattern gaseous detectors (1)
- micro-optics (1)
- micro-photoluminescence (1)
- microlaser (1)
- micromegas detectors (1)
- microresonator (1)
- microresonators (1)
- microscope (1)
- microstructure (1)
- microtomography (1)
- mid-infrared (1)
- mid-infrared sensing (1)
- mid-infrared wavelength applications (1)
- milling process (1)
- mixing state (1)
- mo (1)
- mobility (1)
- mode (1)
- mode matching (1)
- mode matching method (1)
- model Bessel function (1)
- model calculation (1)
- modeling (1)
- modelling (1)
- moisture (1)
- molecular Dynamics (1)
- molecular contacts (1)
- molecular doping (1)
- molecular electronics (1)
- molecular imaging (1)
- molecular movie (1)
- molecular transport (1)
- molecule (1)
- molecule-metal interfaces (1)
- molekulare Dynamik (1)
- molekulare Elektronik (1)
- mono-mode laser (1)
- monodispersity (1)
- monolayers (1)
- monolithic grating (1)
- monomodige Laser (1)
- morphometry (1)
- motivation (1)
- mott insulator (1)
- mouse models (1)
- mram (1)
- multi-messenger physics (1)
- multi-spin flip (1)
- multi-terminal devices (1)
- multichromophores (1)
- multiferroics (1)
- multifunctional nanoparticles (1)
- multilayer (1)
- multimodal imaging (1)
- multiple Botenteilchen (1)
- muon (1)
- muon spectrometer (1)
- muons (1)
- muscle fiber (1)
- myocardial infarction (1)
- n-doping (1)
- nano CT (1)
- nano-CT (1)
- nanoactivity (1)
- nanoantenna (1)
- nanoelectronic (1)
- nanoelectronics (1)
- nanographenes (1)
- nanolithography (1)
- nanoparticle (1)
- nanophotonics (1)
- nanoscale devices (1)
- nanoscience and technology (1)
- nanostructured (1)
- narrow-gap semiconductor (1)
- near-IR chromophores (1)
- near-field optics (1)
- near-gap spectra (1)
- near-infrared spectroscopy (1)
- neural networks (1)
- neutralino (1)
- neutron reflectometry (1)
- new physics (1)
- nexafs (1)
- nicht-diagonale langreichweitige Ordnung (1)
- nichtgeminale Rekombination (1)
- nichtkarthesische Bildgebung (1)
- nichtlinearer Magnetotransport (1)
- niederdimensionale Elektronensysteme (1)
- niedrigemittierende Beschichtung (1)
- noise and multimode dynamics (1)
- non-Cartesian imaging (1)
- non-Cartesian trajectories (1)
- non-classical light (1)
- non-destructive testing (1)
- non-triggered (1)
- nondestructive testing (1)
- nonlinear dynamics (1)
- nonlinear magnetotransport (1)
- nonlinear optics (1)
- nonlinear spectroscopy (1)
- non‐fullerene acceptors (1)
- ntcda (1)
- nuclear magnetic resonance imaging (1)
- nuclear magnetic resonance spectroscopy (1)
- nuclear power (1)
- number (1)
- obstructive pulmonary disease (1)
- occupation number fluctuations (1)
- oil storage (1)
- oilseeds (1)
- oligo-DNA (1)
- oncolytic viruses (1)
- one-dimensional (1)
- one-dimensional systems (1)
- open circuit voltage (1)
- optical (1)
- optical antenna (1)
- optical antennas (1)
- optical lattice (1)
- optical materials and structures (1)
- optical polarization conversion (1)
- optical resonator (1)
- optics (1)
- optimale Teilchendurchmesser (1)
- optimum particle diameter (1)
- optisch (1)
- opto electronics (1)
- optoelectronic devices (1)
- optoelektronische Bauelemente (1)
- orbital imaging (1)
- orbital tomography (1)
- organic bulk heterojunction solar cell (1)
- organic field-effect transistor (1)
- organic molecules (1)
- organic semicondcutors (1)
- organic thin-films (1)
- organic thin‐film transistors (1)
- organic-inorganic hybrid nanostructures (1)
- organic-metal interfaces (1)
- organic–metal interface (1)
- organische Solarzellen (1)
- organische ungeordnete Halbleiter (1)
- oscillating biomagnetic fields (1)
- oscillator strengths (1)
- output elasticities (1)
- oxide (1)
- oxide heterostructure (1)
- oxide heterostructures (1)
- oxides (1)
- oxidische Heterostruktur (1)
- oxygen-enhanced (1)
- p-Halbleiter (1)
- pair potentials (1)
- pair production (1)
- paramagnetic resonance (1)
- parity (1)
- particle (1)
- partition noise (1)
- partizipierende Medien (1)
- passivation (1)
- patterning (1)
- pentacene (1)
- performance (1)
- perovskite solar cells (1)
- perovskites (1)
- perylene dyes (1)
- phase change material (1)
- phase coherence (1)
- phase contrast (1)
- phase contrast imaging (1)
- phase dynamics (1)
- phase retarder (1)
- phase stepping (1)
- phase transition (1)
- phase transitions and critical phenomena (1)
- phase-change (1)
- phase-contrast CMR (1)
- phase-contrast MRI (1)
- phase-space-representation (1)
- phased (1)
- phased-array (1)
- phasematching (1)
- phenolic resin (1)
- phonon (1)
- phosphorescence (1)
- phosphorus (1)
- photo-CELIV (1)
- photochemical air-pollution (1)
- photoelectron spectrocsopy (1)
- photoelectron spectrscopy (1)
- photoinduced transport (1)
- photoinduzierter Transport (1)
- photoluminescence excitation (1)
- photoluminescence spectroscopy (1)
- photon (1)
- photon bunching (1)
- photon counting (1)
- photon lasing (1)
- photonic crystal (1)
- photonic crystals (1)
- photonic dot (1)
- photonics (1)
- photonische Kristalle (1)
- photonischer Punkt (1)
- photon‐correlation (1)
- photoreflectance (1)
- photosensor (1)
- physical characterisation (1)
- physical chemistry (1)
- physical sciences (1)
- physical time (1)
- physics education (1)
- physics transition (1)
- pi-conjugated (1)
- pinned orbital moments (1)
- plant reproduction (1)
- plant roots (1)
- plaque (1)
- plaque characteristics (1)
- plasmon (1)
- plasmon group velocity (1)
- plasmonic waveguides (1)
- plasmons (1)
- point emitters (1)
- polarition condensate (1)
- polariton (1)
- polariton condensation (1)
- polariton laser (1)
- polarization (1)
- polarization pulse shaping (1)
- polaron delocalization (1)
- polyacene (1)
- polymer electrolytes (1)
- polymer thermoelectrics (1)
- polymers (1)
- population inversion (1)
- population oscillations (1)
- pore size (1)
- porous (1)
- porös (1)
- post-processing (1)
- power gain (1)
- pp collisions (1)
- pre-service teachers (1)
- prebolus (1)
- prefrontal cortex (1)
- printed paper photovoltaics (1)
- processing (1)
- professional vision (1)
- program (1)
- proton (1)
- proton MRI (1)
- proton-lead collision (1)
- proton-proton-collisions (1)
- proton-proton-collistion (1)
- proton-prton-collision (1)
- proximity effect (1)
- pulse-wave velocity (1)
- pulsed ODMR (1)
- pulswave velocity (1)
- pyrolysis (1)
- quantitative MRI (1)
- quantitative computed tomography (1)
- quantitative epr (1)
- quantized vortices (1)
- quantum Monte Carlo (1)
- quantum billiard (1)
- quantum communication (1)
- quantum communications (1)
- quantum dash (1)
- quantum dot systems (1)
- quantum gases (1)
- quantum information technology (1)
- quantum interference (1)
- quantum mechanical coupling (1)
- quantum mechanics (1)
- quantum metrology (1)
- quantum optics in semiconductors (1)
- quantum repeaters (1)
- quantum sensing (1)
- quantum spin Hall effect (1)
- quantum transport (1)
- quantum wire (1)
- quantum-dots (1)
- quantum-well -wire and -dot devices (1)
- quantum-well laser (1)
- quantumcascade laser (1)
- quasi-one-dimensional organic metals (1)
- radiation (1)
- radiation transport (1)
- radiative coupling (1)
- radical (1)
- radio continuum: galaxies (1)
- radioactive waste (1)
- radiofrequency ablation (1)
- ray (1)
- reaction cross section (1)
- rectification (1)
- redispergierte Nanopartikel-Sole (1)
- redispersed nanoparticle sol (1)
- registration (1)
- repositories (1)
- resistance (1)
- resistive micromegas (1)
- resolution enhancement (1)
- resonance (1)
- resonances (1)
- resonant inelastic x-ray scattering (1)
- resonant scattering (1)
- resonant tunneling (1)
- resonant tunneling diodes (1)
- resonante Streuung (1)
- resonante Tunneldioden (1)
- resonator (1)
- resonators (1)
- retrospective (1)
- robust (1)
- rotating magnetic field (1)
- s-Channel (1)
- s-shape (1)
- sFLIM (1)
- saccharomyces cerevisiae (1)
- saccotomy (1)
- salt solutions (1)
- samarium hexaboride (1)
- sapwood (1)
- scanning (1)
- scanning electron microscopy (1)
- scattering characteristics (1)
- secondary phases (1)
- seed (1)
- seed aging (1)
- seed quality (1)
- seeds (1)
- selected area growth (1)
- selective multiple quantum filter (1)
- selektiver Mehrquantenfilter (1)
- self-assembled monolayer (SAM) (1)
- self-assembly (1)
- self-calibration (1)
- self-concept (1)
- self-diffusion (1)
- self-gating (1)
- self-navigation (1)
- semi-magnetic (1)
- semiconductor microavity (1)
- semiconductor surfaces (1)
- semileptonic & radiative decays (1)
- semimagnetic semiconductor (1)
- semimagnetisch (1)
- shape-truncation functions (1)
- shear viscosity (1)
- shocks (1)
- side-peak emission (1)
- single crystal (1)
- single crystalline (1)
- single electron transport (1)
- single molecule microscopy (1)
- single photon (1)
- single photons and quantum effects (1)
- single quantum dot (1)
- single top quark (1)
- single-crystalline Ru surfaces (1)
- single-electron tunneling (1)
- single-photon detectors (1)
- single-photon source (1)
- single-top-quarks (1)
- singlet (1)
- site-controlled (1)
- site-controlled quantum dot (1)
- site-controlled quantum dots (1)
- small animal (1)
- soft x-ray (1)
- soft x-ray photoemission (1)
- software (1)
- sol gel (1)
- sol-gel process (1)
- sol-gel-technology (1)
- solar cell (1)
- solar glazing (1)
- solid state physics (1)
- solid support (1)
- solitons (1)
- sorption (1)
- spatially resolved photoluminescence (1)
- specific heat (1)
- spectra (1)
- spectral editing (1)
- spectral interferometry (1)
- spectroscopic imaging (1)
- spektroskopie (1)
- spezifische Absorptionsrate (1)
- spin Hall effect (1)
- spin Injektion (1)
- spin dephasing (1)
- spin entropy (1)
- spin label (1)
- spin labeling (1)
- spin lock (1)
- spin physics (1)
- spin relaxation (1)
- spin torque (1)
- spin torque device (1)
- spin transport (1)
- spin valve (1)
- spin-flip Raman spectroscopy (1)
- spin-lock (1)
- spin-orbit-coupling (1)
- spin-orbit-interaction (1)
- spin-orbit-torque (1)
- spin-phonon coupling (1)
- spin-resolved ARPES (1)
- spin-transfer torque (1)
- spindiffusion (1)
- spindynamic (1)
- spindynamics (1)
- spinflip scattering (1)
- spinpolarized scanning tunneling microscopy, temperature dependent phase transitions (1)
- spintronic (1)
- spintronik (1)
- spoiled gradient echo (1)
- standard semiconductor laser (1)
- standing wave formation (1)
- steady-state free precession (1)
- steam (1)
- stehende Röntgenwellenfelder (1)
- stenosis (1)
- steps (1)
- stimulated (1)
- stimulated echo (1)
- stimulated emission (1)
- stimuliertes Echo (1)
- structure determination (1)
- students' conceptions (1)
- sub-micron (1)
- sub-mikrometer (1)
- subcutaneous implanation (1)
- sucrose allocation (1)
- super-resolution (1)
- super-resolution microscopy (1)
- superconductors (1)
- supercritical CO<sub>2</sub> (1)
- supercurrent (1)
- superfluid (1)
- supergauge transformations (1)
- superparamagnetische Eisenoxid Kontrastmittel (1)
- superprism (1)
- superradiance (1)
- superradiant pulse emission (1)
- supersymmetry (1)
- surface (1)
- surface collisions (1)
- surface morphology (1)
- surface plasmon (1)
- surface preparation (1)
- surface roughness (1)
- surface stress (1)
- surgical and invasive medical procedures (1)
- sustainable energy source (1)
- symmetries (1)
- synthesis (1)
- synthetic MRI (1)
- system (1)
- tapered laser (1)
- tapers (1)
- targeted metabolite profiling (1)
- tau leptons (1)
- tautomerization (1)
- technological constraints (1)
- telecommunication spectral range (1)
- telescope (1)
- telluride (1)
- temperature (1)
- temporal bone (1)
- ternary organic solar cells (1)
- test facility (1)
- thermal barrier coating (1)
- thermal devices (1)
- thermal gating (1)
- thermal insulation (1)
- thermoelectric characterization (1)
- thermoelectric generator (1)
- thermoelectric generators (1)
- thin film (1)
- thin-film transistors (1)
- thorax (1)
- three terminal device (1)
- thulium telluride (1)
- time (1)
- time hole (1)
- time inhomogeneities (1)
- time resolved (1)
- time-of-flight mass spectrometry (1)
- time-resolved (1)
- time-resolved photoluminescence (1)
- timeresolved spectroscopy (1)
- tissue (1)
- tissue characterization (1)
- tomographic imaging method (1)
- tomography (1)
- top quark (1)
- top quark mass (1)
- top quarks (1)
- top-quark (1)
- top-quark mass (1)
- topological (1)
- topological analysis (1)
- topological magnetoelectric effect (1)
- topological materials (1)
- topological superconductor (1)
- topological surface states (1)
- topological transitions (1)
- topologische Analyse (1)
- total energy (1)
- trARPES (1)
- transfer dynamics (1)
- transiente Absorption (1)
- transiente absorption spectroscopy (1)
- transition metal (1)
- transition metal dichalcogenide (1)
- transition metal oxides (1)
- transmission microscopy (1)
- transport gap (1)
- transport measurement (1)
- transport spectroscopy (1)
- transverse energy–energy correlation function (1)
- transverse relaxation (1)
- trap (1)
- trap distribution (1)
- trap states (1)
- trapped atoms/ions (1)
- triangular lattice (1)
- triplet excitons (1)
- triplets (1)
- tryptophan (1)
- tunable laser (1)
- tunnel contacts (1)
- tunneling diodes (1)
- twin suppression (1)
- two photon interference (1)
- two-dimensional electron gas (1)
- two-dimensional spectroscopy (1)
- two-photon absorption (1)
- type II GaIn(As)Sb/GaSb (1)
- type II quantum wells (1)
- ultra high vacuum (1)
- ultra-short laser pulses (1)
- ultracold (1)
- ultrafast (1)
- ultrafast optics (1)
- ultrafast photonics (1)
- ultrafast spectroscopy (1)
- ultrakurz (1)
- ultraschnell (1)
- ultraschnelle Optik (1)
- ultrashort (1)
- ultraviolet photoelectron spectroscopy (1)
- undulation (1)
- up-conversion (1)
- vacancies (1)
- vacuum insulation panel (1)
- vapor-liquid-solid (1)
- variability (1)
- variable density sampling (1)
- vasa vasorum (1)
- vascular cell adhesion molecules (1)
- vascular surgery (1)
- vaskuläre Adhäsionsmoleküle (1)
- vector-field control (1)
- vector-field shaper (1)
- vector-like quarks (1)
- ventilation (1)
- verborgene Grenzflächen (1)
- verdünnte Nitride (1)
- vertebral artery (1)
- vertical (1)
- vertikal (1)
- vestibular aqueduct (VA) (1)
- vibronic electronic excitation (1)
- vicinal (1)
- video analysis (1)
- vis spectroscopy (1)
- water (1)
- water oxidation (1)
- water window (1)
- wavefront (1)
- waveguide (1)
- weak ferromagnetism (1)
- weit abstimmbare Laser (1)
- weite Abstimmbarkeit (1)
- well (1)
- wells (1)
- widely tunable laser (1)
- winkelaufgelöste Photoelektronenspektroskopie (1)
- wires (1)
- worm-like micelles (1)
- wässrige Lösung (1)
- x-ray absorption spectroscopy (1)
- x-ray diffraction (1)
- x-ray emission spectroscopy (1)
- x-ray imaging (1)
- x-ray inline phase contrast (1)
- x-ray magnetic circular dichroism (1)
- x-ray micro computed tomography (1)
- x-ray microscopy (1)
- x-ray spectroscopy (1)
- x-rays (1)
- xerogel (1)
- xylem cavitation (1)
- zeitafgelöst (1)
- zeitaufgelöste Spektroskopie (1)
- zone plate (1)
- zweidimensional (1)
- Übergangsmetalldichalkogenide (1)
- Überstruktur (1)
- √s=8 TeV (1)
Institute
- Physikalisches Institut (816) (remove)
Sonstige beteiligte Institutionen
- Wilhelm-Conrad-Röntgen-Forschungszentrum für komplexe Materialsysteme (4)
- Universitätsklinikum Würzburg (3)
- Röntgen Center for Complex Material Systems (RCCM), Am Hubland, 97074 W¨urzburg, Germany (2)
- ATLAS Collaboration (1)
- Arizona State University, Tempe, Arizona, USA (1)
- Bavarian Center for Applied Energy Research (ZAE Bayern), 97074 Würzburg, Germany (1)
- Bavarian Center for Applied Energy Research e.V. (ZAE Bayern) (1)
- Bayerisches Zentrum für Angewandte Energieforschung e.V. (1)
- Biomedizinische NMR Forschungs GmbH am Max-Planck-Institut fuer biophysikalische Chemie (1)
- CERN (1)
ResearcherID
- D-1250-2010 (1)
- N-7500-2014 (1)
A search for the Standard Model Higgs boson in the H→WW(⋆)→ℓνℓνH→WW(⋆)→ℓνℓν (ℓ=e,μℓ=e,μ) decay mode is presented. The search is performed using proton–proton collision data corresponding to an integrated luminosity of 4.7 fb\(^{−1}\) at a centre-of-mass energy of 7 TeV collected during 2011 with the ATLAS detector at the Large Hadron Collider. No significant excess of events over the expected background is observed. An upper bound is placed on the Higgs boson production cross section as a function of its mass. A Standard Model Higgs boson with mass in the range between 133 GeV and 261 GeV is excluded at 95% confidence level, while the expected exclusion range is from 127 GeV to 233 GeV.
Detailed measurements of the electron performance of the ATLAS detector at the LHC are reported, using decays of the Z, W and J/ψ particles. Data collected in 2010 at s√=7 TeV are used, corresponding to an integrated luminosity of almost 40 pb\(^{−1}\). The inter-alignment of the inner detector and the electromagnetic calorimeter, the determination of the electron energy scale and resolution, and the performance in terms of response uniformity and linearity are discussed. The electron identification, reconstruction and trigger efficiencies, as well as the charge misidentification probability, are also presented.
Two-dimensional triangular lattices of group IV adatoms on semiconductor substrates provide a rich playground for the investigation of Mott-Hubbard physics. The possibility to combine various types of adatoms and substrates makes members of this material class versatile model systems to study the influence of correlation strength, band filling and spin-orbit coupling on the electronic structure - both experimentally and with dedicated many-body calculation techniques. The latter predict exotic ground states such as chiral superconductivity or spin liquid behavior for these frustrated lattices, however, experimental confirmation is still lacking. In this work, three different systems, namely the \(\alpha\)-phases of Sn/SiC(0001), Pb/Si(111), and potassium-doped Sn/Si(111) are investigated with scanning tunneling microscopy and photoemission spectroscopy in this regard. The results are potentially relevant for spintronic applications or quantum computing.
For the novel group IV triangular lattice Sn/SiC(0001), a combined experimental and theoretical study reveals that the system features surprisingly strong electronic correlations because they are boosted by the substrate through its partly ionic character and weak screening capabilities. Interestingly, the spectral function, measured for the first time via angle-resolved photoemission, does not show any additional superstructure beyond the intrinsic \(\sqrt{3} \times \sqrt{3} R30^{\circ}\) reconstruction, thereby raising curiosity regarding the ground-state spin pattern.
For Pb/Si(111), preceding studies have noted a phase transition of the surface reconstruction from \(\sqrt{3} \times \sqrt{3} R30^{\circ}\) to \(3 \times 3\) at 86 K. In this thesis, investigations of the low-temperature phase with high-resolution scanning tunneling microscopy and spectroscopy unveil the formation of a charge-ordered ground state. It is disentangled from a concomitant structural rearrangement which is found to be 2-up/1-down, in contrast to previous predictions. Applying an extended variational cluster approach, a phase diagram of local and nonlocal Coulomb interactions is mapped out. Based on a comparison of theoretical spectral functions with scattering vectors found via quasiparticle interference, Pb/Si(111) is placed in said phase diagram and electronic correlations are found to be the driving force of the charge-ordered state.
In order to realize a doped Mott insulator in a frustrated geometry, potassium was evaporated onto the well-known correlated Sn/Si(111) system. Instead of the expected insulator-to-metal transition, scanning tunneling spectroscopy data indicates that the electronic structure of Sn/Si(111) is only affected locally around potassium atoms while a metallization is suppressed. The potassium atoms were found to be adsorbed on empty \(T_4\) sites of the substrate which eventually leads to the formation of two types of K-Sn alloys with a relative potassium content of 1/3 and 1/2, respectively. Complementary measurements of the spectral function via angle-resolved photoemission reveal that the lower Hubbard band of Sn/Si(111) gradually changes its shape upon potassium deposition. Once the tin and potassium portion on the surface are equal, this evolution is complete and the system can be described as a band insulator without the need to include Coulomb interactions.
Studies of the fragmentation of jets into charged particles in heavy-ion collisions can help in understanding the mechanism of jet quenching by the hot and dense QCD matter created in such collisions, the quark-gluon plasma. These proceedings present a measurement of the angular distribution of charged particles around the jet axis in root s(NN) = 5.02 TeV Pb+Pb and pp collisions, done using the ATLAS detector at the LHC. The measurement is performed inside jets reconstructed with the anti-k(t) algorithm with radius parameter R = 0.4, and is extended to regions outside the jet cone. Results are presented as a function of Pb+Pb collision centrality, and both jet and charged-particle transverse momenta.
In this dissertation the electronic and high-energy optical properties of thin nanoscale
films of the magnetic topological insulator (MTI) (V,Cr)y(BixSb1-x)2-yTe3 are studied
by means of X-ray photoelectron spectroscopy (XPS) and electron energy-loss
spectroscopy (EELS). Magnetic topological insulators are presently of broad interest
as the combination of ferromagnetism and spin-orbit coupling in these materials
leads to a new topological phase, the quantum anomalous Hall state (QAHS), with
dissipation less conduction channels. Determining and controlling the physical
properties of these complex materials is therefore desirable for a fundamental understanding
of the QAHS and for their possible application in spintronics. EELS can
directly probe the electron energy-loss function of a material from which one can
obtain the complex dynamic dielectric function by means of the Kramers-Kronig
transformation and the Drude-Lindhard model of plasmon oscillations.
The XPS core-level spectra in (V,Cr)y(BixSb1-x)2-yTe3 are analyzed in detail with
regards to inelastic background contributions. It is shown that the spectra can be
accurately described based on the electron energy-loss function obtained from an
independent EELS measurement. This allows for a comprehensive and quantitative
analysis of the XPS data, which will facilitate future core-level spectroscopy studies
in this class of topological materials. From the EELS data, furthermore, the bulk and
surface optical properties were estimated, and compared to ab initio calculations
based on density functional theory (DFT) performed in the GW approximation
for Sb2Te3. The experimental results show a good agreement with the calculated
complex dielectric function and the calculated energy-loss function. The positions of
the main plasmon modes reported here are expected to be generally similar in other
materials in this class of nanoscale TI films. Hence, the present work introduces
EELS as a powerful method to access the high-energy optical properties of TI
thin films. Based on the presented results it will be interesting to explore more
systematically the effects of stoichiometry, magnetic doping, film thickness and
surface morphology on the electron-loss function, potentially leading to a better
understanding of the complex interplay of structural, electronic, magnetic and
optical properties in MTI nanostructures.
Die vorliegende Arbeit beschäftigt sich mit der Licht-Materie-Wechselwirkung in Quantenpunkt-Mikroresonatoren und deren vertikalen und lateralen Emissionseigenschaften. Quantenpunkte sind nanoskopische Strukturen, in denen die Beweglichkeit der Ladungsträger unterhalb der de-Broglie-Wellenlänge eingeschränkt ist, wodurch die elektronische Zustandsdichte diskrete Werte annimmt. Sie werden daher auch als künstliche Atome bezeichnet. Um die Emissionseigenschaften der Quantenpunkte zu modifizieren, werden sie im Rahmen dieser Arbeit als aktive Schicht in Mikrosäulenresonatoren eingebracht. Diese bestehen aus einer GaAs lambda-Kavität, die zwischen zwei Braggspiegeln aus alternierenden GaAs und AlAs Schichten eingefasst ist. Diese Resonatoren bieten sowohl eine vertikale Emission über Fabry-Perot Moden, als auch eine laterale Emission über Flustergaleriemoden. Die Licht-Materie-Wechselwirkung zwischen den Resonatormoden und lokalisierten Ladungsträgern in den Quantenpunkten, genannt Exzitonen, kann in zwei Regime unterteilt werden. Im Regime der starken Kopplung wird der spontane Emissionsprozess in einem Quantenpunkt reversibel und das emittierte Photon kann wieder durch den Quantenpunkt absorbiert werden. Die theoretische Beschreibung der Kopplung eines Exzitons an die Resonatormode erfolgt über das Jaynes-Cummings Modell und kann im Tavis-Cummings Modell auf mehrere Emitter erweitert werden. Ist die Dämpfung des Systems zu gross, so befindet man sich im Regime der schwachen Kopplung, in dem die Emissionsrate des Quantenpunkts durch den Purcell-Effekt erhöht werden kann. In diesem Regime können Mikrolaser mit hohen Einkopplungsraten der spontanen Emission in die Resonatormode und niedrigen Schwellpumpströmen realisiert werden. Zur Charakterisierung der Proben werden vor allem die Methoden der Mikro-Elektrolumineszenz und der Photonenkorrelationsmessungen eingesetzt.
In the present thesis the MBE growth and sample characterization of HgTe structures is investigated
and discussed. Due to the first experimental discovery of the quantum Spin Hall effect
(QSHE) in HgTe quantum wells, this material system attains a huge interest in the spintronics
society. Because of the long history of growing Hg-based heterostructures here at the Experimentelle
Physik III in Würzburg, there are very good requirements to analyze this material
system more precisely and in new directions. Since in former days only doped HgTe quantum
wells were grown, this thesis deals with the MBE growth in the (001) direction of undoped
HgTe quantum wells, surface located quantum wells and three dimensional bulk layers. All
Hg-based layers were grown on CdTe substrates which generate strain in the layer stack and
provide therefore new physical effects. In the same time, the (001) CdTe growth was investigated
on n-doped (001) GaAs:Si because the Japanese supplier of CdTe substrates had a
supply bottleneck due to the Tohoku earthquake and its aftermath in 2011.
After a short introduction of the material system, the experimental techniques were demonstrated
and explained explicitly. After that, the experimental part of this thesis is displayed.
So, the investigation of the (001) CdTe growth on (001) GaAs:Si is discussed in chapter 4.
Firstly, the surface preparation of GaAs:Si by oxide desorption is explored and analyzed.
Here, rapid thermal desorption of the GaAs oxide with following cool down in Zn atmosphere
provides the best results for the CdTe due to small holes at the surface, while e.g. an atomic
flat GaAs buffer deteriorates the CdTe growth quality. The following ZnTe layer supplies the
(001) growth direction of the CdTe and exhibits best end results of the CdTe for 30 seconds
growth time at a flux ratio of Zn/Te ~ 1/1.2. Without this ZnTe layer, CdTe will grow in the
(111) direction. However, the main investigation is here the optimization of the MBE growth
of CdTe. The substrate temperature, Cd/Te flux ratio and the growth time has to be adjusted
systematically. Therefore, a complex growth process is developed and established. This optimized
CdTe growth process results in a RMS roughness of around 2.5 nm and a FWHM value
of the HRXRD w-scan of 150 arcsec. Compared to the literature, there is no lower FWHM
value traceable for this growth direction. Furthermore, etch pit density measurements show
that the surface crystallinity is matchable with the commercial CdTe substrates (around 1x10^4
cm^(-2)). However, this whole process is not completely perfect and offers still room for improvements.
The growth of undoped HgTe quantum wells was also a new direction in research in contrast
to the previous n-doped grown HgTe quantum wells. Here in chapter 5, the goal of very low
carrier densities was achieved and therefore it is now possible to do transport experiments in
the n - and p - region by tuning the gate voltage. To achieve this high sample quality, very precise
growth of symmetric HgTe QWs and their HRXRD characterization is examined. Here,
the quantum well thickness can now determined accurate to under 0.3 nm. Furthermore, the transport analysis of different quantum well thicknesses shows that the carrier density and
mobility increase with rising HgTe layer thickness. However, it is found out that the band
gap of the HgTe QW closes indirectly at a thickness of 11.6 nm. This is caused by the tensile
strained growth on CdTe substrates. Moreover, surface quantum wells are studied. These
quantum wells exhibit no or a very thin HgCdTe cap. Though, oxidization and contamination
of the surface reduces here the carrier mobility immensely and a HgCdTe layer of around 5 nm
provides the pleasing results for transport experiments with superconductors connected to the
topological insulator [119]. A completely new achievement is the realization of MBE growth
of HgTe quantum wells on CdTe/GaAs:Si substrates. This is attended by the optimization of
the CdTe growth on GaAs:Si. It exposes that HgTe quantum wells grown in-situ on optimized
CdTe/GaAs:Si show very nice transport data with clear Hall plateaus, SdH oscillations, low
carrier densities and carrier mobilities up to 500 000 cm^2/Vs. Furthermore, a new oxide etching
process is developed and analyzed which should serve as an alternative to the standard
HCl process which generates volcano defects at some time. However, during the testing time
the result does not differ in Nomarski, HRXRD, AFM and transport measurements. Here,
long-time tests or etching and mounting in nitrogen atmosphere may provide new elaborate
results.
The main focus of this thesis is on the MBE growth and standard characterization of HgTe bulk
layers and is discussed in chapter 6. Due to the tensile strained growth on lattice mismatched
CdTe, HgTe bulk opens up a band gap of around 22 meV at the G-point and exhibits therefore
its topological surface states. The analysis of surface condition, roughness, crystalline quality,
carrier density and mobility via Nomarski, AFM, XPS, HRXRD and transport measurements
is therefore included in this work. Layer thickness dependence of carrier density and mobility
is identified for bulk layer grown directly on CdTe substrates. So, there is no clear correlation
visible between HgTe layer thickness and carrier density or mobility. So, the carrier density is
almost constant around 1x10^11 cm^(-2) at 0 V gate voltage. The carrier mobility of these bulk
samples however scatters between 5 000 and 60 000 cm^2/Vs almost randomly. Further experiments
should be made for a clearer understanding and therefore the avoidance of unusable
bad samples.But, other topological insulator materials show much higher carrier densities and
lower mobility values. For example, Bi2Se3 exhibits just density values around 1019 cm^(-2)
and mobility values clearly below 5000 cm2/Vs. The carrier density however depends much
on lithography and surface treatment after growth. Furthermore, the relaxation behavior and
critical thickness of HgTe grown on CdTe is determined and is in very good agreement with
theoretical prediction (d_c = 155 nm). The embedding of the HgTe bulk layer between HgCdTe
layers created a further huge improvement. Similar to the quantum well structures the carrier
mobility increases immensely while the carrier density levels at around 1x10^11 cm^(-2) at 0
V gate voltage as well. Additionally, the relaxation behavior and critical thickness of these
barrier layers has to be determined. HgCdTe grown on commercial CdTe shows a behavior as
predicted except the critical thickness which is slightly higher than expected (d_c = 850 nm).
Otherwise, the relaxation of HgCdTe grown on CdTe/GaAs:Si occurs in two parts. The layer
is fully strained up to 250 nm. Between 250 nm and 725 nm the HgCdTe film starts to relax
randomly up to 10 %. The relaxation behavior for thicknesses larger than 725 nm occurs than
linearly to the inverse layer thickness. A explanation is given due to rough interface conditions
and crystalline defects of the CdTe/GaAs:Si compared to the commercial CdTe substrate. HRXRD and AFM data support this statement. Another point is that the HgCdTe barriers protect the active HgTe layer and because of the high carrier mobilities the Hall measurements provide new transport data which have to be interpreted more in detail in the future. In addition, HgTe bulk samples show very interesting transport data by gating the sample from the top and the back. It is now possible to manipulate the carrier densities of the top and bottom surface states almost separately. The back gate consisting of the n-doped GaAs substrate and the thick insulating CdTe buffer can tune the carrier density for Delta(n) ~ 3x10^11 cm^(-2). This is sufficient to tune the Fermi energy from the p-type into the n-type region [138].
In this thesis it is shown that strained HgTe bulk layers exhibit superior transport data by embedding between HgCdTe barrier layers. The n-doped GaAs can here serve as a back gate.
Furthermore, MBE growth of high crystalline, undoped HgTe quantum wells shows also new
and extended transport output. Finally, it is notable that due to the investigated CdTe growth
on GaAs the Hg-based heterostructure MBE growth is partially independent from commercial
suppliers.
Electro-optical switching between polariton and cavity lasing in an InGaAs quantum well microcavity
(2014)
We report on the condensation of microcavity exciton polaritons under optical excitation in a microcavity with four embedded InGaAs quantum wells. The polariton laser is characterized by a distinct nonlinearity in the input-output-characteristics, which is accompanied by a drop of the emission linewidth indicating temporal coherence and a characteristic persisting emission blueshift with increased particle density. The temporal coherence of the device at threshold is underlined by a characteristic drop of the second order coherence function to a value close to 1. Furthermore an external electric field is used to switch between polariton regime, polariton condensate and photon lasing.
Within this thesis, three main approaches for the assessment and investigation of altered hemodynamics like wall shear stress, oscillatory shear index and the arterial pulse wave velocity in atherosclerosis development and progression were conducted:
1. The establishment of a fast method for the simultaneous assessment of 3D WSS and PWV in the complete murine aortic arch via high-resolution 4D-flow MRI
2. The utilization of serial in vivo measurements in atherosclerotic mouse models using high-resolution 4D-flow MRI, which were divided into studies describing altered hemodynamics in late and early atherosclerosis
3. The development of tissue-engineered artery models for the controllable application and variation of hemodynamic and biologic parameters, divided in native artery models and biofabricated artery models, aiming for the investigation of the relationship between atherogenesis and hemodynamics
Chapter 2 describes the establishment of a method for the simultaneous measurement of 3D WSS and PWV in the murine aortic arch at, using ultra high-field MRI at 17.6T [16], based on the previously published method for fast, self-navigated wall shear stress measurements in the murine aortic arch using radial 4D-phase contrast MRI at 17.6 T [4]. This work is based on the collective work of Dr. Patrick Winter, who developed the method and the author of this thesis, Kristina Andelovic, who performed the experiments and statistical analyses. As the method described in this chapter is basis for the following in vivo studies and undividable into the sub-parts of the contributors without losing important information, this chapter was not split into the single parts to provide fundamental information about the measurement and analysis methods and therefore better understandability for the following studies. The main challenge in this chapter was to overcome the issue of the need for a high spatial resolution to determine the velocity gradients at the vascular wall for the WSS quantification and a high temporal resolution for the assessment of the PWV without prolonging the acquisition time due to the need for two separate measurements. Moreover, for a full coverage of the hemodynamics in the murine aortic arch, a 3D measurement is needed, which was achieved by utilization of retrospective navigation and radial trajectories, enabling a highly flexible reconstruction framework to either reconstruct images at lower spatial resolution and higher frame rates for the acquisition of the PWV or higher spatial resolution and lower frame rates for the acquisition of the 3D WSS in a reasonable measurement time of only 35 minutes. This enabled the in vivo assessment of all relevant hemodynamic parameters related to atherosclerosis development and progression in one experimental session. This method was validated in healthy wild type and atherosclerotic Apoe-/- mice, indicating no differences in robustness between pathological and healthy mice.
The heterogeneous distribution of plaque development and arterial stiffening in atherosclerosis [10, 12], however, points out the importance of local PWV measurements. Therefore, future studies should focus on the 3D acquisition of the local PWV in the murine aortic arch based on the presented method, in order to enable spatially resolved correlations of local arterial stiffness with other hemodynamic parameters and plaque composition.
In Chapter 3, the previously established methods were used for the investigation of changing aortic hemodynamics during ageing and atherosclerosis in healthy wild type and atherosclerotic Apoe-/- mice using the previously established methods [4, 16] based on high-resolution 4D-flow MRI. In this work, serial measurements of healthy and atherosclerotic mice were conducted to track all changes in hemodynamics in the complete aortic arch over time. Moreover, spatially resolved 2D projection maps of WSS and OSI of the complete aortic arch were generated. This important feature allowed for the pixel-wise statistical analysis of inter- and intragroup hemodynamic changes over time and most importantly – at a glance. The study revealed converse differences of local hemodynamic profiles in healthy WT and atherosclerotic Apoe−/− mice, with decreasing longWSS and increasing OSI, while showing constant PWV in healthy mice and increasing longWSS and decreasing OSI, while showing increased PWV in diseased mice. Moreover, spatially resolved correlations between WSS, PWV, plaque and vessel wall characteristics were enabled, giving detailed insights into coherences between hemodynamics and plaque composition. Here, the circWSS was identified as a potential marker of plaque size and composition in advanced atherosclerosis. Moreover, correlations with PWV values identified the maximum radStrain could serve as a potential marker for vascular elasticity. This study demonstrated the feasibility and utility of high-resolution 4D flow MRI to spatially resolve, visualize and analyze statistical differences in all relevant hemodynamic parameters over time and between healthy and diseased mice, which could significantly improve our understanding of plaque progression towards vulnerability. In future studies the relation of vascular elasticity and radial strain should be further investigated and validated with local PWV measurements and CFD.
Moreover, the 2D histological datasets were not reflecting the 3D properties and regional characteristics of the atherosclerotic plaques. Therefore, future studies will include 3D plaque volume and composition analysis like morphological measurements with MRI or light-sheet microscopy to further improve the analysis of the relationship between hemodynamics and atherosclerosis.
Chapter 4 aimed at the description and investigation of hemodynamics in early stages of atherosclerosis. Moreover, this study included measurements of hemodynamics at baseline levels in healthy WT and atherosclerotic mouse models. Due to the lack of hemodynamic-related studies in Ldlr-/- mice, which are the most used mouse models in atherosclerosis research together with the Apoe-/- mouse model, this model was included in this study to describe changing hemodynamics in the aortic arch at baseline levels and during early atherosclerosis development and progression for the first time. In this study, distinct differences in aortic geometries of these mouse models at baseline levels were described for the first time, which result in significantly different flow- and WSS profiles in the Ldlr-/- mouse model. Further basal characterization of different parameters revealed only characteristic differences in lipid profiles, proving that the geometry is highly influencing the local WSS in these models. Most interestingly, calculation of the atherogenic index of plasma revealed a significantly higher risk in Ldlr-/- mice with ongoing atherosclerosis development, but significantly greater plaque areas in the aortic arch of Apoe-/- mice. Due to the given basal WSS and OSI profile in these two mouse models – two parameters highly influencing plaque development and progression – there is evidence that the regional plaque development differs between these mouse models during very early atherogenesis.
Therefore, future studies should focus on the spatiotemporal evaluation of plaque development and composition in the three defined aortic regions using morphological measurements with MRI or 3D histological analyses like LSFM. Moreover, this study offers an excellent basis for future studies incorporating CFD simulations, analyzing the different measured parameter combinations (e.g., aortic geometry of the Ldlr-/- mouse with the lipid profile of the Apoe-/- mouse), simulating the resulting plaque development and composition. This could help to understand the complex interplay between altered hemodynamics, serum lipids and atherosclerosis and significantly improve our basic understanding of key factors initiating atherosclerosis development.
Chapter 5 describes the establishment of a tissue-engineered artery model, which is based on native, decellularized porcine carotid artery scaffolds, cultured in a MRI-suitable bioreactor-system [23] for the investigation of hemodynamic-related atherosclerosis development in a controllable manner, using the previously established methods for WSS and PWV assessment [4, 16]. This in vitro artery model aimed for the reduction of animal experiments, while simultaneously offering a simplified, but completely controllable physical and biological environment. For this, a very fast and gentle decellularization protocol was established in a first step, which resulted in porcine carotid artery scaffolds showing complete acellularity while maintaining the extracellular matrix composition, overall ultrastructure and mechanical strength of native arteries. Moreover, a good cellular adhesion and proliferation was achieved, which was evaluated with isolated human blood outgrowth endothelial cells. Most importantly, an MRI-suitable artery chamber was designed for the simultaneous cultivation and assessment of high-resolution 4D hemodynamics in the described artery models. Using high-resolution 4D-flow MRI, the bioreactor system was proven to be suitable to quantify the volume flow, the two components of the WSS and the radStrain as well as the PWV in artery models, with obtained values being comparable to values found in literature for in vivo measurements. Moreover, the identification of first atherosclerotic processes like intimal thickening is achievable by three-dimensional assessment of the vessel wall morphology in the in vitro models. However, one limitation is the lack of a medial smooth muscle cell layer due to the dense ECM. Here, the utilization of the laser-cutting technology for the generation of holes and / or pits on a microscale, eventually enabling seeding of the media with SMCs showed promising results in a first try and should be further investigated in future studies. Therefore, the proposed artery model possesses all relevant components for the extension to an atherosclerosis model which may pave the way towards a significant improvement of our understanding of the key mechanisms in atherogenesis.
Chapter 6 describes the development of an easy-to-prepare, low cost and fully customizable artery model based on biomaterials. Here, thermoresponsive sacrificial scaffolds, processed with the technique of MEW were used for the creation of variable, biomimetic shapes to mimic the geometric properties of the aortic arch, consisting of both, bifurcations and curvatures. After embedding the sacrificial scaffold into a gelatin-hydrogel containing SMCs, it was crosslinked with bacterial transglutaminase before dissolution and flushing of the sacrificial scaffold. The hereby generated channel was subsequently seeded with ECs, resulting in an easy-to-prepare, fast and low-cost artery model. In contrast to the native artery model, this model is therefore more variable in size and shape and offers the possibility to include smooth muscle cells from the beginning. Moreover, a custom-built and highly adaptable perfusion chamber was designed specifically for the scaffold structure, which enabled a one-step creation and simultaneously offering the possibility for dynamic cultivation of the artery models, making it an excellent basis for the development of in vitro disease test systems for e.g., flow-related atherosclerosis research. Due to time constraints, the extension to an atherosclerosis model could not be achieved within the scope of this thesis. Therefore, future studies will focus on the development and validation of an in vitro atherosclerosis model based on the proposed bi- and three-layered artery models.
In conclusion, this thesis paved the way for a fast acquisition and detailed analyses of changing hemodynamics during atherosclerosis development and progression, including spatially resolved analyses of all relevant hemodynamic parameters over time and in between different groups. Moreover, to reduce animal experiments, while gaining control over various parameters influencing atherosclerosis development, promising artery models were established, which have the potential to serve as a new platform for basic atherosclerosis research.
Atherosclerosis is an inflammatory disease of large and medium-sized arteries, characterized by the growth of atherosclerotic lesions (plaques). These plaques often develop at inner curvatures of arteries, branchpoints, and bifurcations, where the endothelial wall shear stress is low and oscillatory. In conjunction with other processes such as lipid deposition, biomechanical factors lead to local vascular inflammation and plaque growth. There is also evidence that low and oscillatory shear stress contribute to arterial remodeling, entailing a loss in arterial elasticity and, therefore, an increased pulse-wave velocity. Although altered shear stress profiles, elasticity and inflammation are closely intertwined and critical for plaque growth, preclinical and clinical investigations for atherosclerosis mostly focus on the investigation of one of these parameters only due to the experimental limitations. However, cardiovascular magnetic resonance imaging (MRI) has been demonstrated to be a potent tool which can be used to provide insights into a large range of biological parameters in one experimental session. It enables the evaluation of the dynamic process of atherosclerotic lesion formation without the need for harmful radiation. Flow-sensitive MRI provides the assessment of hemodynamic parameters such as wall shear stress and pulse wave velocity which may replace invasive and radiation-based techniques for imaging of the vascular
function and the characterization of early plaque development. In combination with inflammation imaging, the analyses and correlations of these parameters could not only significantly advance basic preclinical investigations of atherosclerotic lesion formation and progression, but also the diagnostic clinical evaluation for early identification of high-risk plaques, which are prone to rupture. In this review, we summarize the key applications of magnetic resonance imaging for the evaluation of plaque characteristics through flow sensitive and morphological measurements. The simultaneous measurements of functional and structural parameters will further preclinical research on atherosclerosis and has the potential to fundamentally improve the detection of inflammation and vulnerable plaques in patients.
Growth, ageing and atherosclerotic plaque development alter the biomechanical forces acting on the vessel wall. However, monitoring the detailed local changes in wall shear stress (WSS) at distinct sites of the murine aortic arch over time has been challenging. Here, we studied the temporal and spatial changes in flow, WSS, oscillatory shear index (OSI) and elastic properties of healthy wildtype (WT, n = 5) and atherosclerotic apolipoprotein E-deficient (Apoe\(^{−/−}\), n = 6) mice during ageing and atherosclerosis using high-resolution 4D flow magnetic resonance imaging (MRI). Spatially resolved 2D projection maps of WSS and OSI of the complete aortic arch were generated, allowing the pixel-wise statistical analysis of inter- and intragroup hemodynamic changes over time and local correlations between WSS, pulse wave velocity (PWV), plaque and vessel wall characteristics. The study revealed converse differences of local hemodynamic profiles in healthy WT and atherosclerotic Apoe\(^{−/−}\) mice, and we identified the circumferential WSS as potential marker of plaque size and composition in advanced atherosclerosis and the radial strain as a potential marker for vascular elasticity. Two-dimensional (2D) projection maps of WSS and OSI, including statistical analysis provide a powerful tool to monitor local aortic hemodynamics during ageing and atherosclerosis. The correlation of spatially resolved hemodynamics and plaque characteristics could significantly improve our understanding of the impact of hemodynamics on atherosclerosis, which may be key to understand plaque progression towards vulnerability.
We report a giant thermal shift of 2.1 MHz/K related to the excited-state zero-field splitting in the silicon vacancy centers in 4H silicon carbide. It is obtained from the indirect observation of the optically detected magnetic resonance in the excited state using the ground state as an ancilla. Alternatively, relative variations of the zero-field splitting for small temperature differences can be detected without application of radiofrequency fields, by simply monitoring the photoluminescence intensity in the vicinity of the level anticrossing. This effect results in an all-optical thermometry technique with temperature sensitivity of 100 mK/Hz\(^{1/2}\) for a detection volume of approximately 10\(^{−6}\) mm\(^3\). In contrast, the zero-field splitting in the ground state does not reveal detectable temperature shift. Using these properties, an integrated magnetic field and temperature sensor can be implemented on the same center.
Der Ausbau der regenerativen Energiequellen führt vermehrt zu unvorhersehbaren Schwankungen der erzeugten Leistung, da Windkraft und Photovoltaik von natürlichen Bedingungen abhängen. Gerade Kurzzeitfluktuationen im Sekunden- bis Minutenbereich, die bei Solarzellen durch die Verschattung von vorüberziehenden Wolken zustande kommen, wird bislang wenig Beachtung geschenkt. Kurzzeitspeicher müssen eine hohe Zyklenstabilität aufweisen, um zur Glättung dieser Leistungsfluktuationen in Frage zu kommen. Im Rahmen der vorliegenden Dissertation wurden elektrochemische Doppelschichtkondensatoren für die Kopplung mit Siliziumsolarzellen und organischen Solarmodulen mit Hilfe von Simulationen und Messungen untersucht. Zusätzlich wurden grundlegende Fragestellungen zur Prozessierung und Alterung von Doppelschichtkondensatoren im Hinblick auf ein in der Literatur bereits diskutiertes System betrachtet, das beide Komponenten in einem Bauteil integriert - den sogenannten photocapacitor.
Um die Druckbarkeit des gesamten elektrochemischen Doppelschichtkondensators zu ermöglichen, wurde der konventionell verwendete Flüssigelektrolyt durch einen Polymer-Gel-Elektrolyten auf Basis von Polyvinylalkohol und einer Säure ersetzt. Durch eine Verbesserung der Prozessierung konnte ein größerer Anteil der spezifischen Fläche der porösen Kohlenstoffelektroden vom Elektrolyten benetzt und somit zur Speicherung genutzt werden. Die Untersuchungen zeigen, dass mit Polymer-Gel-Elektrolyten ähnliche Kapazitäten erreicht werden wie mit Flüssigelektrolyten. Im Hinblick auf die Anwendung im gekoppelten System muss der elektrochemische Doppelschichtkondensator den gleichen Umweltbedingungen hinsichtlich Temperatur und Luftfeuchte standhalten wie die Solarzelle. Hierzu wurden umfangreiche Alterungstests durchgeführt und festgestellt, dass die Kapazität zwar bei Austrocknung des wasserhaltigen Polymer-Gel-Elektrolyten sinkt, bei einer Wiederbefeuchtung aber auch eine Regeneration des Speichers erfolgt.
Zur passenden Auslegung des elektrochemischen Doppelschichtkondensators wurde eine detaillierte Analyse der Leistungsfluktuationen durchgeführt, die mit einem eigens entwickelten MPP-Messgerät an organischen Solarmodulen gemessen wurden. Anhand der Daten wurde analysiert, welche Energiemengen für welche Zeit im Kurzzeitspeicher zwischengespeichert werden müssen, um eine effiziente Glättung der ins Netz einzuspeisenden Leistung zu erreichen. Aus der Statistik der Fluktuationen wurde eine Kapazität berechnet, die als Richtwert in die Simulationen einging und dann mit anderen Kapazitäten verglichen wurde. Neben einem idealen MPP-Tracking für verschiedene Arten von Solarzellen und Beleuchtungsprofilen konnte die Simulation auch die Kopplung aus Solarzelle und elektrochemischem Doppelschichtkondensator mit zwei verschiedenen Betriebsstrategien nachbilden. Zum einen wurde ein fester Lastwiderstand genutzt, zum anderen eine Zielspannung für den Kurzzeitspeicher und somit auch die Solarzelle vorgegeben und der Lastwiderstand variabel so angepasst, dass die Zielspannung gehalten wird. Beide Betriebsmethoden haben einen Energieverlust gegenüber der MPP-getrackten Solarzelle zu verzeichnen, führen aber zu einer Glättung der Leistung des gekoppelten Systems. Die Simulation konnte für Siliziumsolarzellen mit einem Demonstratorversuch im Labor und für organische Solarzellen unter realen Bedingungen validiert werden.
Insgesamt ergibt sich eine vielversprechende Glättung der Leistungsfluktuationen von Solarzellen durch den Einsatz von elektrochemischen Doppelschichtkondensatoren.
Organic semiconductors are attractive for optical sensing applications due to the effortless processing on large active area of several \(cm^2\), which is difficult to achieve with solid-state devices. However, compared to silicon photodiodes, sensitivity and dynamic behavior remain a major challenge with organic sensors. Here, we show that charge trapping phenomena deteriorate the bandwidth of organic photodiodes (OPDs) to a few Hz at low-light levels. We demonstrate that, despite the large OPD capacitances of similar to 10 nF \(cm^{-2}\), a frequency response in the kHz regime can be achieved at light levels as low as 20 nW \(cm^{-2}\) by appropriate interface engineering, which corresponds to a 1000-fold increase compared to state-of-the-art OPDs. Such device characteristics indicate that large active area OPDs are suitable for industrial sensing and even match medical requirements for single X-ray pulse detection in the millisecond range.
The presented thesis deals with the investigation of the characteristic physical properties of lead-free double perovskites. For this purpose lead-free double perovskite single crystals were grown from solution. In order to assess the influence of growth temperature on tail states in the material, the crystals were studied using Photoluminescence Excitation (PLE) and Transmission measurements. Additionally, lead-free double perovskite solar cells and thin films were investigated to address the correlation of precursor stoichiometry and solar cell efficiency. In a last step a new earth abundant lead-free double perovskite was introduced and its physical properties were studied by photoluminescene and absorptance. Like this it was possible to assess the suitability of this material for solar cell applications in the future.
Funktionelle Bildgebung der Lunge und des Bronchialkarzinoms mittels Magnetresonanztomographie
(2008)
Ziel dieser Arbeit war es, die Magnetresonanztomographie (MRT) an der Lunge als Alternative zur traditionellen Lungenbildgebung voranzutreiben. So sollten MRT-Verfahren zur regionalen und quantitativen Lungenfunktionsprüfung für die klinische Routine entwickelt werden. Im Hinblick auf die Strahlentherapie von Patienten mit Bronchialkarzinom sollen funktionelle Lungenareale erkannt werden, um diese während der Bestrahlung optimal schonen zu können. An den zahlreichen Luft-Gewebe-Grenzflächen in der Lunge entstehen Magnetfeldinhomogenitäten. Daraus resultiert ein schneller Zerfall des MRT-Signals in der Lunge. Es wurde in dieser Arbeit ein Ansatz aufgezeigt, um die Ursache für den raschen Signalzerfall, nämlich die unterschiedlichen magnetischen Suszeptibilitäten von Lufträumen und Lungengewebe, zu beseitigen. Durch die intravaskuläre Injektion von paramagnetischen Kontrastmitteln kann die Suszeptibilität des Blutes an die Suszeptibilität der Lufträume angeglichen werden. Durch die Entwicklung einer MR-kompatiblen aktiven Atemkontrolle (MR-ABC) wurde in dieser Arbeit ein weiteres fundamentales Problem der Lungen-MRT adressiert: Die Bewegung während der Datenakquisition. Die MR-ABC detektiert Herzschlag und Atemposition und ist in der Lage die Atembewegung in jeder beliebigen Atemphase reproduzierbar für eine definierte Zeit auszusetzen. Dies wird durch einen Verschluss der Atemluftzufuhr realisiert. Traditionelle Verfahren können zwar ebenfalls die Atemphase detektieren, gestatten jedoch nicht deren Konservierung. Es wurde demonstriert, dass mit der MR-ABC hochauflösende Bilder der Lunge in hoher Bildqualität und durch die Verwendung langer Akquisitionsfenster in relativ kurzer Messzeit erreicht werden können. Eine regionale Lungenfunktionsprüfung ist für die Diagnose und Evaluierung vieler Krankheitsbilder vorteilhaft. In diesem Sinne wird seit einigen Jahren das Potential der Sauerstoff-verstärkten Lungen-MRT erforscht, die auf den paramagnetischen Eigenschaften des molekularen Sauerstoffs basiert. Im Blut gelöster Sauerstoff führt zu einer Verkürzung der T1-Relaxationszeit. Statt diese T1-Verkürzung quantitativ zu bestimmen wird aus praktischen Gründen meist ein T1-gewichteter Ansatz gewählt. In dieser Arbeit wurde jedoch gezeigt, dass nicht-quantitative Verfahren ein erhebliches Risiko zur Falschinterpretation beinhalten. Um Fehldiagnosen zu vermeiden, sollten deshalb prinzipiell quantitative Methoden zur Messung der durch die Sauerstoff-Verstärkung bedingten T1-Verkürzung in der Lunge verwendet werden. Herkömmliche Techniken zur quantitativen T1-Messung benötigen allerdings längere Messzeiten. Deshalb war zur Vermeidung von Bewegungsartefakten bisher die Datenaufnahme im Atemanhaltezustand notwendig. Wiederholtes Atemanhalten von mehreren Sekunden Dauer ist allerdings für einige Patienten sehr belastend. Aus diesem Grund wurden in dieser Arbeit zwei Methoden entwickelt, die eine quantitative Lungenfunktionsprüfung mittels MRT bei freier Atmung der Patienten ermöglichen. Eine gute Sauerstoffversorgung des Tumors wirkt sich positiv auf den Erfolg der Bestrahlung aus. Ein Ansatz zur Verbesserung der Strahlentherapie des Bronchialkarzinoms könnte daher in der Beatmung der Patienten mit hyperoxischen hypercapnischen Atemgasen während der Bestrahlung bestehen. In diesem Zusammenhang könnte die quantitative Messung der T1-Veränderung im Tumor nach Carbogenatmung ein Selektionskriterium darstellen, um diejenigen Patienten zu identifizieren, die von einer Carbogenbeatmung während der Bestrahlung profitieren können. Die Differenzierung zwischen vitalem Tumorgewebe, Nekrosen und atelektatischem Lungengewebe ist von großer Bedeutung bei der Bestrahlungsplanung des Bronchialkarzinoms. Einen neuen Ansatz bildet die in dieser Arbeit vorgestellte Magnetiserungstransfer-MRT. Um einen Magnetisierungstransfer zu erzeugen, wurde ein speziell auf die Bildgebung an der Lunge optimiertes Präparationsmodul entworfen. In Verbindung mit einer schnellen Bildakquisitionstechnik konnte die Magnetisierungstransfer-Lungenbildgebung in einem kurzen Atemstopp durchgeführt werden. Diese Technik wurde an mehreren Patienten mit Bronchialkarzinom evaluiert und die Ergebnisse mit denen der Fluor-Deoxyglykose-Positronen-Emissions-Tomographie (FDG-PET) verglichen. Es wurde festgestellt, dass mit diesem MRT-Verfahren ähnliche diagnostische Erkenntnisse erzielt werden können. Allerdings besitzt die MRT Vorteile im Hinblick auf räumliche Auflösung, Messzeit, Bildqualität, Kosten und Strahlenbelastung. Das erhebliche Potential für die Bestrahlungsplanung des Bronchialkarzinoms durch eine Magnetisierungstransfer-Bildgebung wurde damit nachgewiesen.
Silicon carbide light-emitting diode as a prospective room temperature source for single photons
(2013)
Generation of single photons has been demonstrated in several systems. However, none of them satisfies all the conditions, e.g. room temperature functionality, telecom wavelength operation, high efficiency, as required for practical applications. Here, we report the fabrication of light-emitting diodes (LEDs) based on intrinsic defects in silicon carbide (SiC). To fabricate our devices we used a standard semiconductor manufacturing technology in combination with high-energy electron irradiation. The room temperature electroluminescence (EL) of our LEDs reveals two strong emission bands in the visible and near infrared (NIR) spectral ranges, associated with two different intrinsic defects. As these defects can potentially be generated at a low or even single defect level, our approach can be used to realize electrically driven single photon source for quantum telecommunication and information processing.
Quantum systems can provide outstanding performance in various sensing applications, ranging from bioscience to nanotechnology. Atomic-scale defects in silicon carbide are very attractive in this respect because of the technological advantages of this material and favorable optical and radio frequency spectral ranges to control these defects. We identified several, separately addressable spin-3/2 centers in the same silicon carbide crystal, which are immune to nonaxial strain fluctuations. Some of them are characterized by nearly temperature independent axial crystal fields, making these centers very attractive for vector magnetometry. Contrarily, the zero-field splitting of another center exhibits a giant thermal shift of −1.1 MHz/K at room temperature, which can be used for thermometry applications. We also discuss a synchronized composite clock exploiting spin centers with different thermal response.
Reduced dimensionality and symmetry breaking at interfaces lead to unusual local magnetic configurations, such as glassy behavior, frustration or increased anisotropy. The interface between a ferromagnet and an antiferromagnet is such an example for enhanced symmetry breaking. Here we present detailed X-ray magnetic circular dichroism and X-ray resonant magnetic reflectometry investigations on the spectroscopic nature of uncompensated pinned magnetic moments in the antiferromagnetic layer of a typical exchange bias system. Unexpectedly, the pinned moments exhibit nearly pure orbital moment character. This strong orbital pinning mechanism has not been observed so far and is not discussed in literature regarding any theory for local magnetocrystalline anisotropy energies in magnetic systems. To verify this new phenomenon we investigated the effect at different temperatures. We provide a simple model discussing the observed pure orbital moments, based on rotatable spin magnetic moments and pinned orbital moments on the same atom. This unexpected observation leads to a concept for a new type of anisotropy energy.
Atomic nanowires formed by self-assembled growth on semiconducting surfaces represent a feasible physical realization of quasi-1D electron systems and can be used to study fascinating 1D quantum phenomena. The system in the focus of this thesis, Si(553)-Au, is generated by Au adsorption onto a stepped silicon surface. It features two different chain types, interspersed with each other: A Au chain on the terrace, and a honeycomb chain of graphitic silicon located at the step edge. The silicon atoms at the exposed edges of the latter are predicted to be spin-polarized and charge-ordered [1], leading to an ordered array of local magnetic moments referred to as ``spin chains''.
The present thesis puts this spin chain proposal to an experimental test.
A detailed scanning tunneling microscopy (STM) and scanning tunneling spectroscopy (STS) scrutiny reveals a distinct unoccupied density of states (DOS) feature localized at every third Si step-edge atom, which aligns perfectly with the density functional theory (DFT) prediction.
This finding provides strong evidence for the formation of spin chains at the Si(553)-Au step edges, and simultaneously rules out the interpretation of previous studies which attributed the x3 step-edge superstructure to a Peierls instability.
To study the formation of spin chains in further detail, an additional member of the so-called Si(hhk)-Au family -- Si(775)-Au -- is analyzed.
Based on DFT modeling (performed by S.C. Erwin, Naval Research Laboratory, USA) and detailed STM and STS experiments, a new structure model for this surface is developed, and the absence of spin chains at the Si(775)-Au step edges is demonstrated.
The different step-edge charge distributions of all known Si(hhk)-Au surfaces are traced back to an electron transfer between the terrace and the step edge. Accordingly, an unintentional structure defect should create a localized spin at the Si(775)-Au step edge. This prediction is verified experimentally, and suggest that surface chemistry can be used to create and destroy Si spin chains.
Having clarified why spin chains form on some Si(hhk)-Au surfaces but not on others, various interaction effects of the Si(553)-Au spin chains are inspected.
A collaborative analysis by SPA-LEED (M. Horn-von Hoegen group, University of Duisburg-Essen, Germany), DFT (S.C. Erwin), and STM reveals strong lateral coupling between adjacent spin chains, bearing interesting implications for their magnetic ordering. The centered geometry uncovered leads to magnetic frustration, and may stabilize a 2D quantum spin liquid.
Moreover, a complex interplay between neighboring Au and Si chains is detected.
Specifically, the interaction is found effectively ``one-way'', i.e., the Si step edges respond to the Au chains but not vice versa.
This unidirectional effect breaks the parity of the Si chains, and creates two different configurations of step edges with opposite directionality.
In addition to the static properties of the Si(553)-Au surface mentioned above, the occurrence of solitons in both wire types is witnessed in real space by means of high-resolution STM imaging. The solitons are found to interact with one another such that both move in a coupled fashion along the chains. Likewise, STM experiments as a function of the tunneling current suggest an excitation of solitons along the step edge by the STM tunneling tip.
Solitons are also found to play an essential role in the temperature-dependent behavior of the Si(553)-Au step edges.
It is an accepted fact that the distinct x3 superstructure of the Si(553)-Au step edges vanishes upon heating to room temperature. As a first step in exploring this transition in detail over a large temperature range, a previously undetected, occupied electronic state associated with the localized step-edge spins is identified by means of angle-resolved photoemission spectroscopy (ARPES).
A tracking of this state as a function of temperature reveals an order-disorder-type transition. Complementary STM experiments attribute the origin of this transition to local, thermally activated spin site hops, which correspond to soliton-anitsoliton pairs.
Finally, a manipulation of the Si(553)-Au atomic wire array is achieved by the stepwise adsorption of potassium atoms. This does not only increase the filling of the Au-induced surface bands culminating in a metal-insulator transition (MIT), but also modifies the Si step-edge charge distribution, as indicated by STM and ARPES experiments.
[1] S. C. Erwin and F. Himpsel, Intrinsic magnetism at silicon surfaces, Nat. Commun. 1,
58 (2010).
Quantitative Electron Paramagnetic Resonance Studies of Charge Transfer in Organic Semiconductors
(2020)
In the present work we investigated various charge transfer processes, as they appear in the versatile world of organic semiconductors by probing the spin states of the corresponding charge carrier species via electron paramagnetic resonance (EPR) spectroscopy. All studied material systems are carbon-based compounds, either belonging to the group of polymers, fullerenes, or single-wall carbon nanotubes (SWNTs).
In the first instance, we addressed the change of the open circuit voltage (Voc) with the fullerene blend stoichiometry in fullerene-based solar cells for organic photovoltaics (OPV). The voltage depends strongly on the energy separation between the lowest unoccupied molecular orbital (LUMO) of the donor and the highest occupied molecular orbital (HOMO) of the acceptor. By exploiting the Gaussian distribution of the charge carriers in a two-level system, and thus also their spins in the EPR experiment, it could be shown that the LUMOs get closer by a few to a few hundred meV when going from pure fullerene materials to a fullerene mixture. The reason for this strong energetic effect is likely the formation of a fullerene alloy.
Further, we investigated the chemical doping mechanism of SWNTs with a (6,5)-chirality and their behaviour under optical excitation. In order to determine the unintentional (pre)-doping of SWNTs, EPR spectra of the raw material as well as after different purification steps were recorded. This facilitated the determination of nanotube defects and atmospheric p-doping as the causes of the measured EPR signals. In order to deliberately transfer additional charge carriers to the nanotubes, we added the redox-active substance AuCl3 where we determined an associated doping-yield of (1.5±0.2)%. In addition, a statistical occupation model was developed which can be used to simulate the distribution of EPR active, i.e. unpaired and localised charge carriers on the nanotubes.
Finally, we investigated the charge transfer behaviour of (6,5)-SWNTs together with the polymer P3HT and the fullerene PC60BM after optical excitation.
Zusammenfassung Diese Arbeit beschäftigt sich mit der Herstellung und Untersuchung von neuartigen nanostrukturierten Halbleiterbauelementen. Es wird gezeigt, dass durch den Einsatz von optischer und hochauflösender Elektronenstrahl- und Ionenstrahllithographie verschiedene optoelektronische Bauelemente (Laser und Filter) definiert werden können. Die Kombination dieser Definitionsprozesse mit speziellen nass- und trockenchemischen Ätzverfahren erlaubt die Herstellung von Bauelementen mit sehr hoher Genauigkeit, Reproduzierbarkeit und monolithischer Integrationsfähigkeit mit verschiedensten Geometrien und Bereichen innerhalb der Bauelemente. Die Grundlagen zum Verständnis der Funktionsweise und der Hochfrequenzeigenschaften der einzelnen Resonatorarten, Gitterstrukturen und der Laser mit diesen Gitterstrukturen sind in Kapitel 2 zusammen gefasst. Nach einer kurzen Abhandlung des Laserprinzips und des Aufbaus einer Laserdiode, werden die statischen und dynamischen Kenngrößen und Prozesse in den Lasern ausführlich vorgestellt. Besonderes Augenmerk gilt dabei den dynamischen Grundlagen und der Erläuterung eines zusätzlichen Wechselwirkungsprinzips, genannt „Detuned Loading“, im Laser und die sich daraus ergebenden neuen Eigenschaften. Die Auswirkungen der Resonatorgeometrien und Gitterstrukturen auf die spektralen Eigenschaften der Laser sind Bestandteil des zweiten Teiles von Kapitel 2. In Kapitel 3 werden die technologischen Prozesse zur Herstellung der verschiedensten präsentierten Bauelemente im Detail vorgestellt. Die Vorstellung der Charakterisierungsmethoden und der verwendeten Messplätze schließen dieses Kapitel ab. Kapitel 4 beschäftigt sich ausschließlich mit den elektrischen und spektralen Eigenschaften der einzel- und gekoppelten Quadrat-Resonator-Lasern. Kapitel 5 beschäftigt sich mit monomodige DFB- oder DBR-Lasern für Wellenlängenmultiplexsysteme im Wellenlängenbereich um 1.55 µm, als Einzelkomponenten oder in Arrays, die eine exakt einstellbarere Wellenlänge und hoher Modenstabilität aufweisen. Durch die Verwendung des DBR-Prinzips kann eine signifikante Verbesserung der statischen und dynamischen Eigenschaften gegenüber dem DFB-Prinzip erreicht werden. Die Verbesserungen der statischen Eigenschaften beruhen hauptsächlich auf der räumlichen Trennung von Verstärkungs- und Gitterbereich im Fall des DBR-Lasers und der damit verbundenen Erhöhung der Reflexion des Rückfacettenbereiches. Die Trennung bewirkt eine Reduktion der Absorption im Verstärkungsbereich, keine gitterimplantationsbedingten Erhöhung der internen Absorption wie im DFB-Fall, und damit eine Erhöhung der Effizienz was sich wiederum in einer geringern Wärmeproduktion äußert. Aufgrund der aufgeführten Ursachen ist es möglich durch Größenoptimierung der jeweiligen Bereiche Schwellenströme von 8 mA, Effizienzen von 0.375 W/A, Ausgangsleistungen bis zu 70 mW, Betriebsbereiche bis zum 12fachen des Schwellenstromes, Verschiebungen der Wellenlänge mit dem Betriebsstrom von 0.01 nm/mA, eine thermische Belastbarkeiten bis zu 120°C und Seitenmodenunterdrückungen bis zu 67 dB durch das DBR-Laserprinzip zu realisieren. In Kapitel 6 wird ein neues Konzept eines hochfrequenzoptimierten Lasers vorgestellt. Das Prinzip des „Detuned Loading“ ist sehr sensitiv auf die Phasenlage der umlaufenden Welle im Laser und auf die Lage der Hauptmode auf der Reflexionsfunktion des Gitters. Da eine Phasenänderung von 2einer Längenänderung von einigen 100 nm entspricht und dies außerhalb der Herstellungstoleranz liegt, ist eine gezielte Kontrolle dieses Prinzips im DBR-Laser nicht möglich. Dies führte zu einer Weiterentwicklung des DBR-Lasers in einem Laser der einer Phasenkontrolle ermöglicht, genannt CCIG-Laser. Dieser Laser besteht aus einer Lasersektion, einer zentralen Gittersektion und einer angeschlossenen Phasensektion. Durch Strominjektion in die Phasensektion ist es möglich über eine Änderung des Brechungsindexes eine gezielte Einstellung der Phasenlage zu gewährleisten. Die Phasensektion hat keine Auswirkungen auf die statischen elektrischen und spektralen Eigenschaften der Laser. Diese sind sehr gut mit denen der DBR-Laser vergleichbar. Damit war es möglich durch einen CCIG-Laser mit Sektionsgrößen von 500 µm für jede Sektion eine Steigerung der Bandbreite auf einen Rekordwert von 37 GHz, dass entspricht einem Steigerungsfaktor von 4.5 gegenüber Fabry-Perot-Lasern gleicher Länge, zu steigern.
In this work heterostructures based on the half-Heusler alloy NiMnSb have been fabricated and characterized. NiMnSb is a member of the half-metallic ferromagnets, which exhibit an electron spin-polarization of 100% at the Fermi-level. For fabrication of these structures InP substrates with surface orientations of (001),(111)A and (111)B have been used. The small lattice mismatch of NiMnSb to InP allows for pseudomorphic layers, the (111) orientation additionally makes the formation of a half-metallic interface possible. For the growth on InP(001), procedures for the substrate preparation, growth of the lattice matched (In,Ga)As buffer layer and of the NiMnSb layer have been developed. The effect of flux-ratios and substrate temperatures on the MBE growth of the buffer as well as of the NiMnSb layer have been investigated and the optimum conditions have been pointed out. NiMnSb grows in the layer-by-layer Frank-van der Merwe growth mode, which can be seen by the intensity oscillations of the RHEED specular spot during growth. RHEED and LEED measurements show a flat surface and a well-defined surface reconstruction. High resolution x-ray measurements support this statement, additionally they show a high crystalline quality. Measurements of the lateral and the vertical lattice constant of NiMnSb films on (001) oriented substrates show that layers above a thickness of 20nm exhibit a pseudomorphic as well as a relaxed part in the same layer. Whereas layers around 40nm show partly relaxed partitions, these partitions are totally relaxed for layers above 100nm. However, even these layers still have a pseudomorphic part. Depth-dependent x-ray diffraction experiments prove that the relaxed part of the samples is always on top of the pseudomorphic part. The formation and propagation of defects in these layers has been investigated by TEM. The defects nucleate early during growth and spread until they form a defect network at a thickness of about 40nm. These defects are not typical misfit dislocations but rather antiphase boundaries which evolve in the Mn/Sb sublattice of the NiMnSb system. Dependent on the thickness of the NiMnSb films different magnetic anisotropies can be found. For layers up to 15nm and above 25nm a clear uniaxial anisotropy can be determined, while the layers with thicknesses in between show a fourfold anisotropy. Notably the easy axis for the thin layers is perpendicular to the easy axis observed for the thick layers. Thin NiMnSb layers show a very good magnetic homogeneity, as can be seen by the very small FMR linewidth of 20Oe at 24GHz. However, the increase of the linewidth with increasing thickness shows that the extrinsic damping gets larger for thicker samples which is a clear indication for magnetic inhomogeneities introduced by crystalline defects. Also, the magnetic moment of thick NiMnSb is reduced compared to the theoretically expected value. If a antiferromagnetic material is deposited on top of the NiMnSb, a clear exchange biasing of the NiMnSb layer can be observed. In a further step the epitaxial layers of the semiconductor ZnTe have been grown on these NiMnSb layers, which enables the fabrication of NiMnSb/ZnTe/NiMnSb TMR structures. These heterostructures are single crystalline and exhibit a low surface and interface roughness as measured by x-ray reflectivity. Magnetic measurements of the hysteresis curves prove that both NiMnSb layers in these heterostructures can switch separately, which is a necessary requirement for TMR applications. If a NiMn antiferromagnet is deposited on top of this structure, the upper NiMnSb layer is exchange biased by the antiferromagnet, while the lower one is left unaffected. Furthermore the growth of NiMnSb on (111) oriented substrates has been investigated. For these experiments, InP substrates with a surface orientation of (111)A and (111)B were used, which were miscut by 1 to 2° from the exact orientation to allow for smoother surfaces during growth. Both the (In, Ga)As buffer as well as the NiMnSb layer show well defined surface reconstructions during growth. X-ray diffraction experiments prove the single crystalline structure of the samples. However, neither for the growth on (111)A nor on (111)B a perfectly smooth surface could be obtained during growth, which can be attributed to the formation of pyramid-like facets evolving as a result of the atomic configuration at the surface. A similar relaxation behavior as NiMnSb layers on (001) oriented InP could not be observed. RHEED and x-ray diffraction measurements show that above a thickness of about 10nm the NiMnSb layer begins to relax, but remnants of pseudomorphic parts could not be found. Magnetic measurements show that the misorientation of the substrate crystal has a strong influence on the magnetic anisotropies of NiMnSb(111) samples. In all cases a uniaxial anisotropy could be observed. The easy axis is always aligned parallel to the direction of the miscut of the substrate.
Magnetic resonance imaging is derogated by the presence of metal implants and image quality is impaired. Artifacts are categorized according to their sources, the differences in susceptibility between metal and tissue and the modulation of the magnetic radiofrequency (RF) transmit field. Generally, these artifacts are intensified at higher field strength. The purpose of this work is to analyze the efficiency of current methods used for metal artifact reduction at 3T and to investigate improvements. The impact of high-bandwidth RF pulses on susceptibility-induced artifacts is tested. In addition, the benefit of a two-channel transmit system with respect to shading close to total hip replacements and other elongated metal structures in parallel to the magnetic field is analyzed.
Local transmit/receive coils feature a higher peak B1 amplitude than conventional body coils and thus enable high-bandwidth RF pulses. Susceptibility-induced through-plane distortion relates reciprocally to the RF bandwidth, which is evaluated in vitro for a total knee arthroplasty. Clinically relevant sequences (TSE and SEMAC) with conventional and high RF pulse bandwidths and different contrasts are tested on eight patients with different types of knee implants. Distortion is rated by two radiologists. An additional analysis assesses the capability of a local spine transmit coil. Furthermore, B1 effects close to elongated metal structures are described by an analytical model comprising a water cylinder and a metal rod, which is verified numerically and experimentally. The dependence of the optimal polarization of the transmit B1 field, creating minimum shading, on the position of the metal is analyzed. In addition, the optimal polarization is determined for two patients; its benefit compared to circular polarization is assessed.
Phantom experiments confirm the relation of the RF bandwidth and the through-plane distortion, which can be reduced by up to 79% by exploitation of a commercial local transmit/receive knee coil at 3T. On average, artifacts are rated “hardly visible” for patients with joint arthroplasties, when high-bandwidth RF pulses and SEMAC are used, and for patients with titanium fixtures, when high-bandwidth RF pulses are used in combination with TSE. The benefits of the local spine transmit coil are less compared to the knee coil, but enable a bandwidth 3.9 times as high as the body coil. The modulation of B1 due to metal is approximated well by the model presented and the position of the metal has strong influence on this effect. The optimal polarization can mitigate shading substantially.
In conclusion, through-plane distortion and related artifacts can be reduced significantly by the application of high-bandwidth RF pulses by local transmit coils at 3T. Parallel transmission offers an option to substantially reduce shading close to long metal structures aligned with the magnetic field. Effective techniques dedicated for metal implant imaging at 3T are introduced in this work.
In this work, we take a look at the connection of gamma-ray bursts (GRBs) and ultra-high-energy cosmic rays (UHECR) as well as the possibilities how to verify this connection. The currently most promising approach is based on the detection of high-energy neutrinos, which are associated with the acceleration of cosmic rays. We detail how the prompt gamma-ray emission is connected to the prediction of a neutrino signal. We focus on the interactions of photons and protons in this regard. At the example of the current ANTARES GRB neutrino analysis, we show the differences between numerical predictions and older analytical methods. Moreover, we discuss the possibilities how cosmic ray particles can escape from GRBs, assuming that UHECR are entirely made up of protons. For this, we compare the commonly assumed neutron escape model with a new component of direct proton escape. Additionally, we will show that the different components, which contribute to the cosmic ray flux, strongly depend on the burst parameters, and test the applicability on some chosen GRBs. In a further step, we continue with the considerations regarding the connection of GRBs and UHECR by connecting the GRB source model with the cosmic
ray observations using a simple cosmic ray propagation code. We test if it is possible to achieve the observed cosmic ray energy densities with our simple model and what the consequences are regarding the prompt GRB neutrino flux predictions as well as the cosmogenic neutrinos. Furthermore, we consider the question of neutrino lifetime and how it affects the prompt GRB neutrino flux predictions. In a final chapter, we show that it is possible to apply the basic source model with photohadronic interactions to other types of sources, using the example of the microquasar Cygnus X-3.
Nuclear magnetic resonance has numerous applications for in vivo diagnostics. However, methods requiring homogeneous magnetic fields, particularly magnetic resonance spectroscopy (MRS) techniques, have limited applicability in regions near or on anatomical boundaries that cause strong inhomogeneities. In cases where the shim system can not or just partly correct for these inhomogeneities, methods based on intermolecular multiple quantum coherence (iMQC) detection can provide an alternative solution for in vivo MRS. This dissertation presented the development, validation and application potential of a novel MRS pulse sequence detecting intermolecular zero-quantum coherences (iZQC) with special emphasis on in vivo experiments. In addition, the detection limit and spectral behaviour of iZQC-MRS under modelled realistic conditions were systematically approached for the first time. Based on the original sequence used to detect two dimensional (2D) iZQC-spectra, dubbed HOMOGENIZED, methodological development led to increased sensitivity and water suppression, and decreased T2-relaxation effects through the application of a frequency selective 90° RF-pulse in place of a non selective beta-pulse. Best water suppression was achieved by placing a pair of selective refocusing units immediately prior to the acquisition window. The same placement was found to be optimal also for single voxel localization units based on slice selective spin echo refocusing. By voxel selection before the iZQC-MRS sequence, the chemical shift artefact could be avoided. However, this led to significant residual signal from outside the voxel. Analytical derivations of signal evolution for several sequences presented in this dissertation provide useful additions to the iZQC MRS theory. In vivo applications of the developed sequence provided high quality spectra in the central nervous system of the rat, the mouse brain and in subcutaneous xenograft tumor grown on the thigh of the mouse. In all these 2D spectra, the limiting factor of the resolution in the indirect dimension was the digital sampling rate, rather than inhomogeneous line broadening. Nevertheless, linewidths of the cross-peaks were similar or narrower than along the direct axis, where the sampling rate was about ten times higher. The first MR spectroscopic investigation of the rat spinal cord at 17.6 T was performed. Through its insensitivity to macroscopic field inhomogeneities, the localized iZQC method allowed for the selection of larger voxels than conventional methods and still provided the same spectral resolution. This property was used also in tumor tissue to propel the relative signal to noise (SNR) efficiency of the iZQC spectroscopy for the first time above the SNR efficiency of a conventional sequence. Future applications for fast metabolite count in large inhomogeneous organs, like a tumor, are thinkable. Extensive simulations and phantom experiments assessed the limit of iZQC cross-peak detection in presence of local field distortions. The order of maximum volume ratio between dipole source and voxel was found to be between 0.1 % and 1 %. It is an essential conclusion of this study that the dominant effect of microscopic to mesoscopic inhomogeneities on iZQC spectra under general in vivo conditions, like for voxels greater than (1 mm)³ and metabolite concentrations in the millimolar range, is a cross-peak intensity reduction and not line broadening. The iZQC method provided resolution enhancement in comparison to conventional MRS even in the presence of clustered paramagnetic microparticles. However, the vision of iZQC spectroscopy in green leafs or the lung epithelium has to be, unfortunately, abandoned, because cross-peaks can be observed until the volume of the separating medium is much larger than the volume of local dipole sources. Intermolecular zero-quantum coherence spectroscopy remains an exciting field in NMR research on living organisms. It provides access to the monitoring of relative metabolite concentration changes in the presence of microscopic iron particles, which raises realistic hopes for new applications in studies using stained stem cells.
As a non-destructive testing method, X-ray imaging has proved to be suitable for the examination of a variety of objects. The measurement principle is based on the attenuation of X-rays caused by these objects. This attenuation can be recorded as shades of intensity using X-ray detectors and thus contains information about the inner structure of the investigated object. Since X-rays are electromagnetic waves, they also experience a change of phase in addition to their attenuation while penetrating an object. In general, imaging methods based on this effect are referred to as phase contrast imaging techniques. In the laboratory, the two mainly used methods are the propagation based phase contrast or in-line phase contrast and the grating interferometry.
While in-line phase contrast - under certain conditions - shows edge enhancement at interfaces due to interference, phase contrast in the grating interferometry is only indirectly measurable by the use of several gratings. In addition to phase contrast, grating interferometry provides access to the so-called dark-field imaging contrast, which measures the scattering of X-rays caused by an object.
These two imaging techniques, together with a novel concept of laboratory X-ray sources, the liquid-metal-jet, form the main part of this work. Compared to conventional X-ray sources, the liquid-metal-jet source offers higher brightness. The term brightness is defined by the number of X-ray photons per second, emitting area (area of the X-ray spot) and solid angle at which they are emitted.
On the basis of this source, a high resolution in-line phase contrast setup was partially developed in the scope of this work. Several computed tomographies show the feasibility of in-line phase contrast and the improvement of image quality by applying phase retrieval algorithms.
Moreover, the determination of optimized sample positions for in-line phase contrast imaging is treated at which the edge enhancement is maximized. Based on primitive fiber objects, this optimization has proven to be a good approximation.
With its high brightness in combination with a high spatial coherence, the liquid-metal-jet source is also interesting for grating interferometry. The development of such a setup is also part of this work. The overall concept and the characterization of the setup is presented as well as the applicability and its limits for the investigation of various objects.
Due to the very unique concept of this grating interferometer it was possible to realize a modified interferometer system by using a single grating only. Its concept and results are also presented in this work.
Furthermore, a grating interferometer based on a microfocus X-ray tube was tested regarding its performance. Thereby, parameters like the anode material, acquisition geometry and gratings were altered in order to find the advantages and disadvantages of each configuration.
The goal of this work is to improve the understanding of adsorption-induced deformation in nanoporous (and in particular microporous) materials in order to explore its potential for material characterization and provide guidelines for related technical applications such as adsorption-driven actuation. For this purpose this work combines in-situ dilatometry measurements with in-depth modeling of the obtained adsorption-induced strains. A major advantage with respect to previous studies is the combination of the dilatometric setup and a commercial sorption instrument resulting in high quality adsorption and strain isotherms. The considered model materials are (activated and thermally annealed) carbon xerogels, a sintered silica aerogel, a sintered hierarchical structured porous silica and binderless zeolites of type LTA and FAU; this selection covers micro-, meso- and macroporous as well as ordered and disordered model materials.
All sample materials were characterized by scanning electron microscopy, gas adsorption and sound velocity measurements. In-situ dilatometry measurements on mesoporous model materials were performed for the adsorption of N2 at 77 K, while microporous model materials were also investigated for CO2 adsorption at 273 K, Ar adsorption at 77 K and H2O adsorption at 298 K. Within this work the available in-situ dilatometry setup was revised to improve resolution and reproducibility of measurements of small strains at low relative pressures, which are of particular relevance for microporous materials.
The obtained experimental adsorption and strain isotherms of the hierarchical structured porous silica and a micro-macroporous carbon xerogel were quantitatively analyzed based on the adsorption stress model; this approach, originally proposed by Ravikovitch and Neimark, was extended for anisotropic pore geometries within this work. While the adsorption in silica mesopores could be well described by the classical and analytical theory of Derjaguin, Broekhoff and de Boer, the adsorption in carbon micropores required for comprehensive nonlocal density functional theory calculations. To connect adsorption-induced stresses and strains, furthermore mechanical models for the respective model materials were derived. The resulting theoretical framework of adsorption, adsorption stress and mechanical model was applied to the experimental data yielding structural and mechanical information about the model materials investigated, i.e., pore size or pore size distribution, respectively, and mechanical moduli of the porous matrix and the nonporous solid skeleton. The derived structural and mechanical properties of the model materials were found to be consistent with independent measurements and/or literature values. Noteworthy, the proposed extension of the adsorption stress model proved to be crucial for the correct description of the experimental data.
Furthermore, it could be shown that the adsorption-induced deformation of disordered mesoporous aero-/xerogel structures follows qualitatively the same mechanisms obtained for the ordered hierarchical structured porous silica. However, respective quantitative modeling proved to be challenging due to the ill-shaped pore geometry of aero-/xerogels; good agreement between model and experiment could only be achieved for the filled pore regime of the adsorption isotherm and the relative pressure range of monolayer formation. In the intermediate regime of multilayer formation a more complex model than the one proposed here is required to correctly describe stress related to the curved adsorbate-adsorptive interface. Notably, for micro-mesoporous carbon xerogels it could be shown that micro- and mesopore related strain mechanisms superimpose one another.
The strain isotherms of the zeolites were only qualitatively evaluated. The result for the FAU type zeolite is in good agreement with other experiments reported in literature and the theoretical understanding derived from the adsorption stress model. On the contrary, the strain isotherm of the LTA type zeolite is rather exceptional as it shows monotonic expansion over the whole relative pressure range. Qualitatively this type of strain isotherm can also be explained by the adsorption stress model, but a respective quantitative analysis is beyond the scope of this work.
In summary, the analysis of the model materials' adsorption-induced strains proved to be a suitable tool to obtain information on their structural and mechanical properties including the stiffness of the nonporous solid skeleton. Investigations on the carbon xerogels modified by activation and thermal annealing revealed that adsorption-induced deformation is particularly suited to analyze even small changes of carbon micropore structures.
Two-dimensional electron gases (2DEGs) at transition-metal oxide (TMO) interfaces, and boundary states in topological insulators, are being intensively investigated. The former system harbors superconductivity, large magneto-resistance, and ferromagnetism. In the latter, honeycomb-lattice geometry plus bulk spin-orbit interactions lead to topologically protected spin-polarized bands. 2DEGs in TMOs with a honeycomb-like structure could yield new states of matter, but they had not been experimentally realized, yet. We successfully created a 2DEG at the (111) surface of KTaO3, a strong insulator with large spin-orbit coupling. Its confined states form a network of weakly-dispersing electronic gutters with 6-fold symmetry, a topology novel to all known oxide-based 2DEGs. If those pertain to just one Ta-(111) bilayer, model calculations predict that it can be a topological metal. Our findings demonstrate that completely new electronic states, with symmetries not realized in the bulk, can be tailored in oxide surfaces, promising for TMO-based devices.
This thesis focuses on various aspects and techniques of 19F magnetic resonance (MR). The first chapters provide an overview of the basic physical properties, 19F MR and MR sequences related to this work. Chapter 5 focuses on the application of 19F MR to visualize biological processes in vivo using two different animal models. The dissimilar models underlined the wide applicability of 19F MR in preclinical research. A subsection of Chapter 6 shows the application of compressed sensing (CS) to 19F turbo-spin-echo chemical shift imaging (TSE-CSI), which leads to reduced measurement time. CS, however, can only be successfully applied when a sufficient signal-to-noise ratio (SNR) is available. When the SNR is low, so-called spike artifacts occur with the CS algorithm used in the present work. However, it was shown in an additional subsection that these artifacts can be reduced using a CS-based post processing algorithm. Thus, CS might help overcome limitations with time consuming 19F CSI experiments. Chapter 7 deals with a novel technique to quantify the B+1 profile of an MR coil. It was shown that, using a specific application scheme of off resonant pulses, Bloch-Siegert (BS)-based B+1 mapping can be enabled using a Carr Purcell Meiboom Gill (CPMG)-based TSE sequence. A fast acquisition of the data necessary for B+1 mapping was thus enabled. In the future, the application of BS-CPMG-TSE B+1 mapping to improve quantification using 19F MR could therefore be possible.
Neue physikalische Erkenntnisse vervollständigen die Sicht auf die Welt und erschließen gleichzeitig Wege für Folgeexperimente und technische Anwendungen. Das letzte Jahrzehnt der Festkörperforschung war vom zunehmenden Fokus der theoretischen und experimentellen Erkundung topologischer Materialien geprägt. Eine fundamentale Eigenschaft ist ihre Resistenz gegenüber solchen Störungen, welche spezielle physikalische Symmetrien nicht verletzen. Insbesondere die Topologischen Isolatoren - Halbleiter mit isolierenden Volumen- sowie gleichzeitig leitenden und spinpolarisierten Oberflächenzuständen - sind vielversprechende Kandidaten zur Realisierung breitgefächerter spintronischer Einsatzgebiete. Bis zur Verwirklichung von Quantencomputern und anderer, heute noch exotisch anmutender Konzepte bedarf es allerdings ein umfassenderes Verständnis der grundlegenden, physikalischen Zusammenhänge. Diese kommen vor allem an Grenzflächen zum Tragen, weshalb oberflächensensitive Methoden bei der Entdeckung der Topologischen Isolatoren eine wichtige Rolle spielten.
Im Rahmen dieser Arbeit werden daher strukturelle, elektronische und magnetische Eigenschaften Topologischer Isolatoren mittels Tieftemperatur-Rastertunnelmikroskopie und -spektroskopie sowie begleitenden Methoden untersucht.
Die Veränderung der Element-Ausgangskonzentration während dem Wachstum des prototypischen Topologischen Isolators Bi2Te3 führt zur Realisierung eines topologischen p-n Übergangs innerhalb des Kristalls. Bei einem spezifischen Verhältnis von Bi zu Te in der Schmelze kommt es aufgrund unterschiedlicher Erstarrungstemperaturen der Komponenten zu einer Ansammlung von Bi- und Te-reichen Gegenden an den gegenüberliegenden Enden des Kristalls. In diesen bildet sich infolge des jeweiligen Elementüberschusses durch Kristallersetzungen und -fehlstellen eine Dotierung des Materials aus. Daraus resultiert die Existenz eines Übergangsbereiches, welcher durch Transportmessungen verifiziert werden kann. Mit der räumlich auflösenden Rastertunnelmikroskopie wird diese Gegend lokalisiert und strukturell sowie elektronisch untersucht. Innerhalb des Übergangsbereiches treten charakteristische Kristalldefekte beider Arten auf - eine Defektunterdrückung bleibt folglich aus. Dennoch ist dort der Beitrag der Defekte zum Stromtransport aufgrund ihres gegensätzlichen Dotiercharakters vernachlässigbar, sodass der topologische Oberflächenzustand die maßgeblichen physikalischen Eigenschaften bestimmt. Darüber hinaus tritt der Übergangsbereich in energetischen und räumlichen Größenordnungen auf, die Anwendungen bei Raumtemperatur denkbar machen.
Neben der Veränderung Topologischer Isolatoren durch den gezielten Einsatz intrinsischer Kristalldefekte bieten magnetische Störungen die Möglichkeit zur Prüfung des topologischen Oberflächenzustandes auf dessen Widerstandsfähigkeit sowie der gegenseitigen Wechselwirkungen. Die Zeitumkehrinvarianz ist ursächlich für den topologischen Schutz des Oberflächenzustandes, weshalb magnetische Oberflächen- und Volumendotierung diese Symmetrie brechen und zu neuartigem Verhalten führen kann.
Die Oberflächendotierung Topologischer Isolatoren kann zu einer starken Bandverbiegung und einer energetischen Verschiebung des Fermi-Niveaus führen. Bei einer wohldosierten Menge der Adatome auf p-dotiertem Bi2Te3 kommt die Fermi-Energie innerhalb der Volumenzustands-Bandlücke zum Liegen. Folglich wird bei Energien rund um das Fermi-Niveau lediglich der topologische Oberflächenzustand bevölkert, welcher eine Wechselwirkung zwischen den Adatomen vermitteln kann. Für Mn-Adatome kann Rückstreuung beobachtet werden, die aufgrund der Zeitumkehrinvarianz in undotierten Topologischen Isolatoren verboten ist. Die überraschenderweise starken und fokussierten Streuintensitäten über mesoskopische Distanzen hinweg resultieren aus der ferromagnetischen Kopplung nahegelegener Adsorbate, was durch theoretische Berechnungen und Röntgendichroismus-Untersuchungen bestätigt wird. Gleichwohl wird für die Proben ein superparamagnetisches Verhalten beobachtet.
Im Gegensatz dazu führt die ausreichende Volumendotierung von Sb2Te3 mit V-Atomen zu einem weitreichend ferromagnetischen Verhalten. Erstaunlicherweise kann trotz der weitläufig verbreiteten Theorie Zeitumkehrinvarianz-gebrochener Dirac-Zustände und der experimentellen Entdeckung des Anormalen Quanten-Hall-Effektes in ähnlichen Probensystemen keinerlei Anzeichen einer spektroskopischen Bandlücke beobachtet werden. Dies ist eine direkte Auswirkung der dualen Natur der magnetischen Adatome: Während sie einerseits eine magnetisch induzierte Bandlücke öffnen, besetzen sie diese durch Störstellenresonanzen wieder. Ihr stark lokaler Charakter kann durch die Aufnahme ihrer räumlichen Verteilung aufgezeichnet werden und führt zu einer Mobilitäts-Bandlücke, deren Indizien durch vergleichende Untersuchungen an undotiertem und dotiertem Sb2Te3 bestätigt werden.
Die Dynamik der Kernspindephasierung in lebenden Systemen enhält relevante Informationen über biologisch wichtige Parameter, wie Sauerstoffversorgung, Mikrozirkulation, Diffusion etc.. Ursächlich für die Dephasierung sind Interaktionen des Spins mit fluktuierenden Magnetfeldern. Notwendig sind also Modelle, welche diese Interaktionen mit den biologisch relevanten Parametern in Beziehung setzen. Problematisch ist, daß fast alle analytische Ansätze nur in extremen Dynamikbereichen der Störfeldfluktuationen (motional narrowing - , static dephasing limit) gültig sind. In dieser Arbeit zeigen wir einen Ansatz, mit dem man die Dynamik der Störfeldfluktuationen erheblich vereinfachen und trotzdem noch deren wesentliche Eigenschaften beibehalten kann. Dieser Ansatz ist nicht auf einen speziellen Dynamikbereich festgelegt. Angewendet wird dieses Näherungsverfahren zur Beschreibung der Spin Dephasierung im Herzmuskel. Die Relaxationszeiten erhält man als Funktion der Kapillardichte und Blutoxygenierung. Vergleiche mit numerisch errechneten Daten anderer, eigenen Messungen am menschlichen Herzen und experimentellen Befunden in der Literatur, bestätigen die theoretischen Vorhersagen.
Two-dimensional (2D) topological insulators are a new class of materials with properties that are
promising for potential future applications in quantum computers. For example, stanene represents
a possible candidate for a topological insulator made of Sn atoms arranged in a hexagonal
lattice. However, it has a relatively fragile low-energy spectrum and sensitive topology. Therefore,
to experimentally realize stanene in the topologically non-trivial phase, a suitable substrate
that accommodates stanene without compromising these topological properties must be found.
A heterostructure consisting of a SiC substrate with a buffer layer of adsorbed group-III elements
constitutes a possible solution for this problem. In this work, 2D adatom systems of Al and In
were grown epitaxially on SiC(0001) and then investigated structurally and spectroscopically by
scanning tunneling microscopy (STM) and photoelectron spectroscopy.
Al films in the high coverage regime \( (\Theta_{ML}\approx2\) ML\( ) \) exhibit unusually large, triangular- and
rectangular-shaped surface unit cells. Here, the low-energy electron diffraction (LEED)
pattern is brought into accordance with the surface topography derived from STM. Another Al
reconstruction, the quasi-one-dimensional (1D) Al phase, exhibits a striped surface corrugation,
which could be the result of the strain imprinted by the overlayer-substrate lattice mismatch.
It is suggested that Al atoms in different surface areas can occupy hexagonal close-packed and
face-centered cubic lattice sites, respectively, which in turn lead to close-packed transition regions
forming the stripe-like corrugations. On the basis of the well-known herringbone reconstruction
from Au(111), a first structural model is proposed, which fits well to the structural data from
STM. Ultimately, however, thermal treatments of the sample could not generate lower coverage
phases, i.e. in particular, a buffer layer structure.
Strong metallic signatures are found for In high coverage films \( (\Theta_{ML}\approx3\) to \(2\) ML\() \) by
scanning tunneling spectroscopy (STS) and angle-resolved photoelectron spectroscopy (ARPES),
which form a \( (7\times7) \), \( (6\times4\sqrt{3}) \), and \( (4\sqrt{3}\times4\sqrt{3}) \) surface reconstruction. In all these In phases
electrons follow the nearly-free electron model. Similar to the Al films, thermal treatments could
not obtain the buffer layer system.
Surprisingly, in the course of this investigation a triangular In lattice featuring a \( (1\times1) \)
periodicity is observed to host massive Dirac-like bands at \( K/K^{\prime} \) in ARPES. Based on this
strong electronic similarity with graphene at the Brillouin zone boundary, this new structure is
referred to as \textit{indenene}. An extensive theoretical analysis uncovers the emergence of an electronic
honeycomb network based on triangularly arranged In \textit{p} orbitals. Due to strong atomic spin-orbit
coupling and a comparably small substrate-induced in-plane inversion symmetry breaking this
material system is rendered topologically non-trivial. In indenene, the topology is intimately
linked to a bulk observable, i.e., the energy-dependent charge accumulation sequence within the
surface unit cell, which is experimentally exploited in STS to confirm the non-trivial topological
character. The band gap at \( K/K^{\prime} \), a signature of massive Dirac fermions, is estimated by
ARPES to approximately 125 meV. Further investigations by X-ray standing wave, STM, and
LEED confirm the structural properties of indenene. Thus, this thesis presents the growth and
characterization of the novel quantum spin Hall insulator material indenene.
We herein perform open circuit voltage decay (OCVD) measurements on methylammonium lead iodide (CH3NH3PbI3) perovskite solar cells to increase the understanding of the charge carrier recombination dynamics in this emerging technology. Optically pulsed OCVD measurements are conducted on CH3NH3PbI3 solar cells and compared to results from another type of thin-film photovoltaics, namely, the two reference polymer–fullerene bulk heterojunction solar cell devices based on P3HT:PC60BM and PTB7:PC70BM blends. We observe two very different time domains of the voltage transient in the perovskite solar cell with a first drop on a short time scale that is similar to the decay in the studied organic solar cells. However, 65%–70% of the maximum photovoltage persists on much longer timescales in the perovskite solar cell than in the organic devices. In addition, we find that the recombination dynamics in all time regimes are dependent on the starting illumination intensity, which is also not observed in the organic devices. We then discuss the potential origins of these unique behaviors.
The charge transport in disordered organic bulk heterojunction (BHJ) solar cells is a crucial process affecting the power conversion efficiency (PCE) of the solar cell. With the need of synthesizing new materials for improving the power conversion efficiency of those cells it is important to study not only the photophysical but also the electrical properties of the new material classes. Thereby, the experimental techniques need to be applicable to operating solar cells. In this work, the conventional methods of transient photoconductivity (also known as "Time-of-Flight" (TOF)), as well as the transient charge extraction technique of "Charge Carrier Extraction by Linearly Increasing Voltage" (CELIV) are performed on different organic blend compositions. Especially with the latter it is feasible to study the dynamics, i.e. charge transport and charge carrier recombination, in bulk heterojunction (BHJ) solar cells with active layer thicknesses of 100-200 nm. For a well performing organic BHJ solar cells the morphology is the most crucial parameter finding a trade-off between an efficient photogeneration of charge carriers and the transport of the latter to the electrodes. Besides the morphology, the nature of energetic disorder of the active material blend and its influence on the dynamics are discussed extensively in this work. Thereby, the material system of poly(3-hexylthiophene-2,5-diyl) (P3HT) and [6,6]-phenyl-C61 butyric acid methyl ester (PC61BM) serves mainly as a reference material system. New promising donor or acceptor materials and their potential for application in organic photovoltaics are studied in view of charge dynamics and compared with the reference system. With the need for commercialization of organic solar cells the question of the impact of environmental conditions on the PCE of the solar cells raises. In this work, organic BHJ solar cells exposed to synthetic air for finite duration are studied in view of the charge carrier transport and recombination dynamics. Finally, within the framework of this work the technique of photo-CELIV is improved. With the modified technique it is now feasible to study the mobility and lifetime of charge carriers in organic solar cells under operating conditions.
In this thesis, the Josephson effect in mercury telluride based superconducting quantum point contacts (SQPCs) is studied. Implementing such confined structures into topological superconductors has been proposed as a means to detect and braid Majorana fermions. For the successful realization of such experiments though, coherent transport across the constriction is essential. By demonstrating the Josephson effect in a confined topological system, the presented experiments lay the foundation for future quantum devices that can be used for quantum computation. In addition, the experiments also provide valuable insights into the behavior of the Josephson effect in the low-channel limit (N<20). Due to the confinement of the weak link, we can also study the Josephson effect in a topological insulator, where the edge modes interact.
In conclusion, this thesis discusses the fabrication of, and low-temperature measurements on mercury telluride quantum point contacts embedded within Josephson junctions. We find that the merging of the currently used fabrication methods for mercury telluride quantum point contacts and Josephson junctions does not yield a good enough device quality to resolve subbands of the quantum point contact as quantization effects in the transport properties. As we attribute this to the long dry etching time that is necessary for a top-contact, the fabrication process was adapted to reduce the defect density at the superconductor-semiconductor interface. Employing a technique that involves side contacting the mercury telluride quantum well and reducing the size of the mercury telluride mesa to sub-micrometer dimensions yields a quantized supercurrent across the junction. The observed supercurrent per mode is in good agreement with theoretical predictions for ballistic, one-dimensional modes that are longer than the Josephson penetration depth. Moreover, we find that oscillatory features superimpose the plateaus of the supercurrent and the conductance. The strength of these oscillatory features are sample-dependent and complicate the identification of plateaus. We suggest that the oscillatory features originate mainly from local defects and the short gate electrode. Additionally, resonances are promoted within the weak link if the transparency of the superconductor-HgTe interface differs from one.
Furthermore, the research explores the regimes of the quantum spin Hall effect and the 0.5 anomaly. Notably, a small yet finite supercurrent is detected in the QSH regime. In samples fabricated from thick mercury telluride quantum wells, the supercurrent appears to vanish when the quantum point contact is tuned into the regime of the 0.5 anomaly. For samples fabricated from thin mercury telluride quantum wells, the conductance as well as the supercurrent vanish for strong depopulation. In these samples though, the supercurrent remains detectable even for conductance values significantly below 2 e²/h.
Numerical calculation reproduce the transport behavior of the superconducting quantum point contacts.
Additionally, the topological nature of the weak link is thoroughly investigated using the supercurrent diffraction pattern and the absorption of radio frequency photons. The diffraction pattern reveals a gate independent, monotonous decay of $I_\text{sw}(B)$, which is associated with the quantum interference of Andreev bound states funneled through the quantum point contact. Interestingly, the current distribution in the weak link appears unaffected as the quantum point contact is depleted. In the RF measurements, indications of a 4π periodic supercurrent are observed as a suppression of odd Shapiro steps. The ratio of the 4π periodic current to the 2π periodic current appears to decrease for smaller supercurrents, as odd Shapiro steps are exclusively suppressed for large supercurrents. Additionally, considering the observation that the supercurrent is small when the bulk modes in the quantum point contact are fully depleted, we suggest that the re-emerging of odd Shapiro steps is a consequence of the group velocity of the edge modes being significantly suppressed when the bulk modes are absent. Consequently, the topological nature of the superconducting quantum point contact is only noticeable in the transport properties when bulk modes are transmitted through the superconducting quantum point contact.
The shown experiments are the first demonstration of mercury telluride superconducting quantum point contacts that exhibit signatures of quantization effects in the conductance as well as the supercurrent. Moreover, the experiments suggest that the regime of interacting topological edge channels is also accessible in mercury telluride superconducting quantum point contacts. This is potentially relevant for the realization of Majorana fermions and their application in the field of quantum computation.
This thesis is aimed at establishing modalities of time-resolved photoelectron spectroscopy (tr-PES) conducted at a free-electron laser (FEL) source and at a high harmonic generation (HHG) source for imaging the motion of atoms, charge and energy at photoexcited hybrid organic/inorganic interfaces. Transfer of charge and energy across interfaces lies at the heart of surface science and device physics and involves a complex interplay between the motion of electrons and atoms. At hybrid organic/inorganic interfaces involving planar molecules, such as pentacene and copper(II)-phthalocyanine (CuPc), atomic motions in out-of-plane direction are particularly apparent. Such hybrid interfaces are of importance to, e.g., next-generation functional devices, smart catalytic surfaces and molecular machines. In this work, two hybrid interfaces – pentacene atop Ag(110) and copper(II)-phthalocyanine (CuPc) atop titanium disulfide (1T-TiSe2) – are characterized by means of modalities of tr-PES. The experiments were conducted at a HHG source and at the FEL source FLASH at Deutsches Elektronen-Synchrotron DESY (Hamburg, Germany). Both sources provide photon pulses with temporal widths of ∼ 100 fs and thus allow for resolving the non-equilibrium dynamics at hybrid interfaces involving both electronic and atomic motion on their intrinsic time scales. While the photon energy at this HHG source is limited to the UV-range, photon energies can be tuned from the UV-range to the soft x-ray-range at FLASH. With this increased energy range, not only macroscopic electronic information can be accessed from the sample’s valence and conduction states, but also site-specific structural and chemical information encoded in the core-level signatures becomes accessible. Here, the combined information from the valence band and core-level dynamics is obtained by performing time- and angle-resolved photoelectron spectroscopy (tr-ARPES) in the UV-range and subsequently performing time-resolved x-ray photoelectron spectroscopy (tr-XPS) and time-resolved photoelectron diffraction (tr-XPD) in the soft x-ray regime in the same experimental setup. The sample’s bandstructure in energy-momentum space and time is captured by a time-of-flight momentum microscope with femtosecond temporal and sub-Ångström spatial resolutions. In the investigated systems, out-of-equilibrium dynamics are traced that are connected to the transfer of charge and energy across the hybrid interfaces. While energetic shifts and complementary population dynamics are observed for molecular and substrate states, the shapes of involved molecular orbitals change in energy-momentum space on a subpicosecond time scale. In combination with theory support, these changes are attributed to iiiatomic reorganizations at the interface and transient molecular structures are reconstructed with sub-Ångström precision. Unique to the material combination of CuPc/TiSe2, a structural rearrangement on the macroscopic scale is traced simultaneously: ∼ 60 % of the molecules undergo a concerted, unidirectional in-plane rotation. This surprising observation and its origin are detailed in this thesis and connected to a particularly efficient charge transfer across the CuPc/TiSe2 interface, resulting in a charging of ∼ 45 % of CuPc molecules.
This doctoral thesis investigates magneto-optical properties of mercury telluride layers grown tensile strained on cadmium telluride substrates. Here, layer thicknesses start above the usual quantum well thickness of about 20 nm and have a upper boundary around 100 nm due to lattice relaxation effects. This kind of layer system has been attributed to the material class of three-dimensional topological insulators in numerous publications. This class stands out due to intrinsic boundary states which cross the energetic band gap of the layer's bulk.
In order to investigate the band structure properties in a narrow region around the Fermi edge, including possible boundary states, the method of highly precise time-domain Terahertz polarimetry is used. In the beginning, the state of the art of Teraherz technology at the start of this project is discussed, moving on to a detailed description and characterization of the self-built measurement setup. Typical standard deviation of a polarization rotation or ellipticity measurement are on the order of 10 to 100 millidegrees, according to the transmission strength through investigated samples. A range of polarization spectra, depending on external magnetic fields up to 10 Tesla, can be extracted from the time-domain signal via Fourier transformation.
The identification of the actual band structure is done by modeling possible band structures by means of the envelope function approximation within the framework of the k·p method. First the bands are calculated based on well-established model parameters and from them the possible optical transitions and expected ellipticity spectra, all depending on external magnetic fields and the layer's charge carrier concentration. By comparing expected with measured spectra, the validity of k·p models with varying depths of detail is analyzed throughout this thesis. The rich information encoded in the ellipitcity spectra delivers key information for the attribution of single optical transitions, which are not part of pure absorption spectroscopy. For example, the sign of the ellipticity signals is linked to the mix of Landau levels which contribute to an optical transition, which shows direct evidence for bulk inversion asymmetry effects in the measured spectra.
Throughout the thesis, the results are compared repeatedly with existing publications on the topic. It is shown that the models used there are often insufficient or, in worst case, plainly incorrect. Wherever meaningful and possible without greater detours, the differences to the conclusions that can be drawn from the k·p model are discussed.
The analysis ends with a detailed look on remaining differences between model and measurement. It contains the quality of model parameters as well as different approaches to integrate electrostatic potentials that exist in the structures into the model.
An outlook on possible future developments of the mercury cadmium telluride layer systems, as well as the application of the methods shown here onto further research questions concludes the thesis.
The material system of interest in this thesis are II-VI-semiconductors. The first part of this thesis focuses on the formation of self-assembled CdSe-based quantum dots (QD) on ZnSe. The lattice constants of ZnSe and CdSe differ as much as about 7\% and therefore a CdSe layer grown on top of ZnSe experiences a huge strain. The aspired strain relief constitutes in the self-assembly of QDs (i.e. a roughened layer structure). Additionally, this QD layer is intermixed with Zn as this is also a possibility to decrease the strain in the layer. For CdSe on ZnSe, in Molecular Beam Epitaxy (MBE), various QD growth procedures were analysed with respect to the resulting Cd-content of the non-stoichiometric ternary (Zn,Cd)Se. The evaluation was performed by Raman Spectroscopy as the phonon frequency depends on the Cd-content. The second part of the thesis emphasis on the interface properties of n-ZnSe on n-GaAs. Different growth start procedures of the ZnSe epilayer may lead to different interface configurations with characteristic band-offsets and carrier depletion layer widths. The analysis is mainly focused on the individual depletion layer widths in the GaAs and ZnSe. This non-destructive analysis is performed by evaluating the Raman signal which comprises of phonon scattering from the depleted regions and coupled plasmon-phonon scattering from regions with free carriers.
The observed impurity induced far-infrared absorption in CsCl : Rb\(^+\) and CsCl : K\(^+\) is compared with a calculated density of acoustic phonon states in CsCl. The absorption due to CsCl : Rb\(^+\) displays a minimum between the acoustic and optic phonon bands. A narrow line is observed in CsCl: K\(^+\) at 85.8 cm\(^{-1}\) which falls in this quasi-phonon gap.
In this paper, we present results on the first MBE growth of HgSe. The influence of the GaAs substrate temperature as well as the Hg and Se fluxes on the growth and the electrical properties has been investigated. It has been found that the growth rate is very low at substrate temperatures above 120°C. At 120°C and at lower temperatures, the growth rate is appreciably higher. The sticking coefficient of Se seems to depend inversely on the Hg/Se flux ratio. Epitaxial growth could be maintained at 70°C with Hg/Se flux ratios between lOO and ISO, and at 160°C between 280 and 450. The electron mobilities of these HgSe epilayers at room temperature decrease from a maximum value of 8.2 x 10^3 cm2 /V' s with increasing electron concentration. The concentration was found to be between 6xlO^17 and 1.6x10^19 cm- 3 at room temperature. Rocking curves from X-ray diffraction measurements of the better epilayers have a full width at half maximum of 5S0 arc sec.
Molecular beam epitaxially grown short period (001) Hg\(_{1_x}\)Cd\(_x\)Te-HgTe superlattices have been systematically investigated. Several narrow well widths were chosen, e.g., 30, 35 and 40 Å, and the barrier widths were varied between 24 and 90 Å for a particular well width. Both the well width and the total period were determined directly by means of x-ray diffraction. The well width was determined by exploiting the high reflectivity from HgTe and the low reflectivity from CdTe for the (002) Bragg reflection. Knowing the well and barrier widths we have been able to set an upper limit on the average Cd concentration of the barriers, \(\overline x_b\), by annealing several superlattices and then measuring the composition of the resulting alloy. \(\overline x_b\) was shown to decrease exponentially with decreasing barrier width. The structure of a very short period superlattice, i.e., 31.4 Å, was also investigated by transmission electron microscopy, corroborating the x-ray diffraction results.
New resonant-mode infrared absorption lines have been observed in NaCl with high concentrations of fluorine impurities. The quadratic concentration dependence of the strength of these lines indicates that they are due to pairs of fluorine impurities. At the resonant frequencies, the motion of some host ions appears to be as important as the motion of the impurities themselves.
The molecular beam epitaxially growth of (001) Hg\(_{1-x}\) Cd\(_z\) Te-HgTe superlattices has been systematically investigated. The well width as well as the period were determined directly by X-ray diffraction. This was accomphshed for the well width by exploiting the high reflectivity from HgTe and the low reflectivity from CdTe for the (002) Bragg reflection. Knowing the well and barrier thicknesses we have been able to set an upper limit on the aver~ge composition of the barriers, Xl, by annealing the superlattice and then measuring the composition of the. resultmg alloy. Xb was shown to decrease exponentially with decreasing barrier width. Xb is appreciably smaller m. narrow barriers due to the increased significance of interdiffusion in the Hg\(_{1-x}\)Cd\(_x\) Te/HgTe interface in narrow barriers. The experimentally determined optical absorption coefficient for these superlattices is compared WIth theoretical calculations. The absorption coefficient was determined from transmission and reflection spectra at 300, 77 and 5 K. Using the thickness and composition of the barriers and wells, and an interface width due to interdiffusion, the complex refractive index is calculated and compared with the experimental absorption coefficient. The envelope function method based on an 8 x 8 second order k . p band model was used to calculate the superlattice states. These results when inserted into Kubo's formula, yield the dynamic conductivity for interband transitions. The experimental and theoretical values for the absorption coefficient using no adjustable parameters are in good agreement for most of the investigated superlattices. Furthermore the agreement for the higher energetic interband transitions is much worse if values for the barrier composition, which are appreciably different than the experimentally determined values, are used. The infrared photoluminescence was investigated at temperatures from 4.2 to 300 K. Pronounced photoluminescence was observed for all superlattices in this temperature range.
Herstellung und Charakterisierung von Halbleiterbauelementen für die integrierte Quantenphotonik
(2014)
Der Schwerpunkt dieser Arbeit liegt auf der Entwicklung quantenphotonischer Komponenten, welche für eine monolithische Integration auf einem Halbleiter-Chip geeignet sind. Das GaAs-Materialsystem stellt für solch einen optischen Schaltkreis die ideale Plattform dar, weil es flexible Einzelphotonenquellen bereithält und mittels ausgereifter Technologien auf vielfältige Weise prozessiert werden kann.
Als Photonenemitter werden Quantenpunkte genutzt. Man kann sie mit komplexen Bauelementen kombinieren, um ihre optischen Eigenschaften weiter zu verbessern.
Im Rahmen dieser Arbeit konnte eine erhöhte Effizienz der Photonenemission beobachtet werden, wenn Quantenpunkte in Wellenleiter eingebaut werden, die durch photonische Kristalle gebildet werden. Die reduzierte Gruppengeschwindigkeit die diesem Effekt zugrunde liegt konnte anhand des Modenspektrums von kurzen Wellenleitern nachgewiesen werden. Durch zeitaufgelöste Messungen konnte ermittelt werden, dass die Zerfallszeit der spontanen Emission um einen Faktor von 1,7 erhöht wird, wenn die Emitter zur Mode spektrale Resonanz aufweisen. Damit verbunden ist eine sehr hohe Modeneinkopplungseffizienz von 80%.
Das Experiment wurde erweitert, indem die zuvor undotierte Membran des Wellenleiters durch eine Diodenstruktur ersetzt und elektrische Kontakte ergänzt wurden. Durch Anlegen von elektrischen Feldern konnte die Emissionsenergie der Quantenpunkte über einen weiten spektralen Bereich von etwa 7meV abgestimmt werden. Das Verfahren kann genutzt werden, um die exzitonischen Quantenpunktzustände in einen spektralen Bereich der Wellenleitermode mit besonders stark reduzierter Gruppengeschwindigkeit zu verschieben. Hierbei konnten für Purcell-Faktor und Kopplungseffizienz Bestwerte von 2,3 und 90% ermittelt werden. Mithilfe einer Autokorrelationsmessung wurde außerdem nachgewiesen, dass die Bauelemente als Emitter für einzelne Photonen geeignet sind.
Ein weiteres zentrales Thema dieser Arbeit war die Entwicklung spektraler Filterelemente. Aufgrund des selbstorganisierten Wachstums und der großen räumlichen Oberflächendichte von Quantenpunkten werden von typischen Anregungsmechanismen Photonen mit einer Vielzahl unterschiedlicher Energien erzeugt. Um die Emission eines einzelnen Quantenpunktes zu selektieren, muss der Transmissionsbereich des Filters kleiner sein als der Abstand zwischen benachbarten Spektrallinien. Ein Filter konnte durch die Variation des effektiven Brechungsindex entlang von indexgeführten Wellenleitern realisiert werden. Es wurde untersucht wie sich die optischen Eigenschaften durch strukturelle Anpassungen verbessern lassen. Ein weiterer Ansatz wurde mithilfe photonischer Kristalle umgesetzt. Es wurde gezeigt, dass der Filter hierbei eine hohe Güte von 1700 erreicht und gleichzeitig die Emission des Quantenpunkt-Ensembles abgetrennt werden kann. Die Bauelemente wurden so konzipiert, dass die im photonischen Kristall geführten Moden effizient in indexgeführte Stegwellenleiter einkoppeln können.
Ein Teil dieser Arbeit beschäftigte sich zudem mit den Auswirkungen von anisotropen Verspannungen auf die exzitonischen Zustände der Quantenpunkte. Besonders starke Verspannungsfelder konnten induziert werden, wenn der aktive Teil der Bauelemente vom Halbleitersubstrat abgetrennt wurde. Dies wurde durch ein neu entwickeltes Fabrikationsverfahren ermöglicht.
Infolgedessen konnten die Emissionsenergien reversibel um mehr als 5meV abgestimmt werden, ohne dass die optischen Eigenschaften signifikant beeinträchtigt wurden.
Die auf den aktiven Teil der Probe wirkende Verspannung wurde durch die Anwendung verschiedener Modelle abgeschätzt. Darüberhinaus wurde gezeigt, dass durch Verspannungen der spektrale Abstand zwischen den Emissionen von Exziton und Biexziton gezielt beeinflusst werden kann. Die Kontrolle dieser exzitonischen Bindungsenergie kann für die Erzeugung quantenmechanisch verschränkter Photonen genutzt werden. Dieses Ziel kann auch durch die Reduzierung der Feinstrukturaufspaltung des Exzitons erreicht werden. Die experimentell untersuchten Quantenpunkte weisen Feinstrukturaufspaltungen in der Größenordnung von 100meV auf. Durch genau angepasste Verspannungsfelder konnte der Wert erheblich auf 5,1meV verringert werden. Beim Durchfahren des Energieminimums der Feinstrukturaufspaltung wurde eine Drehung der Polarisationsrichtung um nahezu 90° beobachtet. Desweiteren wurde ein Zusammenhang des Polarisationsgrades mit der Feinstrukturaufspaltung nachgewiesen.
Es wurde ein weiterer Prozessablauf entworfen, um komplexe Halbleiterstrukturen auf piezoelektrische Elemente übertragen zu können. Damit war es möglich den Einfluss der Verspannungsfelder auf Systeme aus Quantenpunkten und Mikroresonatoren zu untersuchen. Zunächst wurde demonstriert, dass die Modenaufspaltung von Mikrosäulenresonatoren reversibel angepasst werden kann. Dies ist ebenfalls von Interesse für die Erzeugung polarisationsverschränkter Photonen. An Resonatoren aus photonischen Kristallen konnte schließlich gezeigt werden, dass das Verhältnis der spektralen Abstimmbarkeiten von exzitonischen Emissionslinien und Resonatormode etwa fünf beträgt, sodass beide Linien in Resonanz gebracht werden können. Dieses Verhalten konnte zur Beeinflussung der Licht-Materie-Wechselwirkung genutzt werden.
No abstract available