Refine
Has Fulltext
- yes (7)
Is part of the Bibliography
- yes (7)
Year of publication
- 2010 (7) (remove)
Document Type
- Doctoral Thesis (4)
- Journal article (2)
- Book (1)
Language
- English (7) (remove)
Keywords
- Fernerkundung (2)
- Geologie (2)
- Westafrika (2)
- Feuerökologie (1)
- Fluid (1)
- HyMap (1)
- Höhendaten (1)
- Jungquartär (1)
- Kartierung (1)
- Klimaänderung (1)
Institute
- Institut für Geographie und Geologie (7) (remove)
Surveys by the Universities of Wuerzburg and Berlin, starting in the 1970´s have revealed the existence of palaeolakes in remote areas in Niger. Initial research has shown that the sediments found are suitable for reconstructing its late quaternary palaeoenvironment. Although a high number of investigations focused on the succession of climatological conditions in the Central Sahara, some uncertainties still exist as the results show discontinuities and mostly are of low temporal and spatial
resolution.
Two expeditions in 2005 and 2006 headed to the northeastern parts of Niger to investigate the known remains of palaeolakes and search some new and undetected ones. Samples were taken at several study sites in order to receive a complete picture of the Late Quaternary environmental settings and to produce high-resolution proxies for palaeoclimate modelling.
The most valuable and best-investigated study site is the sebkha of Seggedim, where a core of 15 meters length could be extracted which revealed a composition of high-resolution sections. Stratigraphical, structural and geochemical investigations as well as the analysis of thin sections allow the characterization of different environmental conditions from Early to Mid Holocene. Driven by climate and hydrogeological influence, the water body developed from a water pond of several metres depth within a stable, grass and shrub vegetated landscape, to an alternating freshwater lake in a more dynamic environmental setting. Radiocarbon dates set the beginning of the stage at about 10.6 ka cal BP, with an exceptionally stable regime to 6.6 ka cal BP (at 12.6 metres’ depth), when a major change in the sedimentation regime of the basin is recorded in the core. Increased erosion, likely due to decreased vegetation cover within the basin, led to the siltation/filling of the lake within a few hundred years and the subsequent development of a sebkha/salt pan due to massive evaporation. Due to the lack of dateable material in the upper core section, the termination of the lake stage and the onset of the subsequent sebkha stage cannot be determined precisely but can be narrowed to a period around 6 ka BP.
The results obtained from the core are compared with those from terrestrial and lacustrine sediments from outside the depression, situated a few hundred kilometres further to the north. These supplementary study sites are required to validate the information obtained from the coring. Within the plateau landscape of Djado, Mangueni and Tchigai, two depressions and a valley containing lacustrine deposits, were investigated for palaeoenvironmental reconstruction. Depending on modifying local factors, these sediment archives were of shorter existence than IX the lake, but reveal additional information about the landscape dynamics from Early to Mid Holocene.
A damming situation within a small tributary at Enneri Achelouma led to lacustrine sedimentation conditions at Early Holocene in the upper reaches of the valley. The remnants of the lacustrine accumulations show distinct changes in the environmental conditions within the small catchment, as the archive immediately responded to local climate-induced changes of precipitation. Radiocarbon dating of the deposited sediments revealed ages from 8780 ± 260 cal a BP to 9480 ± 80 cal a BP.
The sites of Yoo Ango and Fabérgé show a completely different sedimentation milieu as they consist of basins within the foothills of the Tchigai. The study sites show increased catchment sizes, probably extending towards the Tchigai massif and are most likely influenced by groundwater charge. The widespread occurrence of wind shaped relicts and the limited amount of lacustrine remnants indicate a generally high aeolian activity in both areas. Only in wind sheltered spots, parts of the lacustrine sequences were preserved, that show ages spanning from Early to Mid Holocene (9440 ± 140 cal a BP – 6810 ±140 cal a BP) and give additional evidence of fires from pre-LGM periods. Although intensively weathered, all profiles indicate distinct changes in the sedimentation conditions by alternating geochemical values and the mineralogical composition.
The information obtained from the records investigated in this work confirms the heterogeneity of reconstructed environmental succession in the Central Sahara. The Mid Holocene rapid (within decades) and uniform development from more humid to extremely arid environmental conditions cannot be confirmed for the Central Sahara. In addition, a division of Early and Mid Holocene wet periods cannot be confirmed, either. Actually, the evidences obtained from the palaeoenvironmental reconstructions revealed major variations in the timing and extend of lacustrine and aeolian periods. Evidently, a transitional time has existed between 7 to 5 ka BP where alternating influences prevailed. This is indicated by the varying sedimentation conditions in the Seggedim depression as well as the evidence of soil properties on a fossil dune, with a time of deposition dated to 6200 ± 400 cal a BP and the removal of lacustrine Sediments at the Seeterrassental at Mid Holocene. In respect to provide a complete picture of landscape succession and to avoid misinterpretation, the investigation of several dissimilar spots within a designated study area is prerequisite for further investigations.
The overarching goal of this research was to explore accurate methods of mapping irrigated crops, where digital cadastre information is unavailable: (a) Boundary separation by object-oriented image segmentation using very high spatial resolution (2.5–5 m) data was followed by (b) identification of crops and crop rotations by means of phenology, tasselled cap, and rule-based classification using high resolution (15–30 m) bi-temporal data. The extensive irrigated cotton production system of the Khorezm province in Uzbekistan, Central Asia, was selected as a study region. Image segmentation was carried out on pan-sharpened SPOT data. Varying combinations of segmentation parameters (shape, compactness, and color) were tested for optimized boundary separation. The resulting geometry was validated against polygons digitized from the data and cadastre maps, analysing similarity (size, shape) and congruence. The parameters shape and compactness were decisive for segmentation accuracy. Differences between crop phenologies were analyzed at field level using bi-temporal ASTER data. A rule set based on the tasselled cap indices greenness and brightness allowed for classifying crop rotations of cotton, winter-wheat and rice, resulting in an overall accuracy of 80 %. The proposed field-based crop classification method can be an important tool for use in water demand estimations, crop yield simulations, or economic models in agricultural systems similar to Khorezm.
Wetlands in West Africa are among the most vulnerable ecosystems to climate change. West African wetlands are often freshwater transfer mechanisms from wetter climate regions to dryer areas, providing an array of ecosystem services and functions. Often wetland-specific data in Africa is only available on a per country basis or as point data. Since wetlands are challenging to map, their accuracies are not well considered in global land cover products. In this paper we describe a methodology to map wetlands using well-corrected 250-meter MODIS time-series data for the year 2002 and over a 360,000 km2 large study area in western Burkina Faso and southern Mali (West Africa). A MODIS-based spectral index table is used to map basic wetland morphology classes. The index uses the wet season near infrared (NIR) metrics as a surrogate for flooding, as a function of the dry season chlorophyll activity metrics (as NDVI). Topographic features such as sinks and streamline areas were used to mask areas where wetlands can potentially occur, and minimize spectral confusion. 30-m Landsat trajectories from the same year, over two reference sites, were used for accuracy assessment, which considered the area-proportion of each class mapped in Landsat for every MODIS cell. We were able to map a total of five wetland categories. Aerial extend of all mapped wetlands (class “Wetland”) is 9,350 km2, corresponding to 4.3% of the total study area size. The classes “No wetland”/“Wetland” could be separated with very high certainty; the overall agreement (KHAT) was 84.2% (0.67) and 97.9% (0.59) for the two reference sites, respectively. The methodology described herein can be employed to render wide area base line information on wetland distributions in semi-arid West Africa, as a data-scarce region. The results can provide (spatially) interoperable information feeds for inter-zonal as well as local scale water assessments.
Taxonomy and palaeoecology of the Cenomanian-Turonian macro-invertebrate from eastern Sinai, Egypt
(2010)
The present study concerened with taxonomy and palaeoecology of the Cenomanian-Turonian macrobenthic fauna which includes bivalves, gastropods, echinoids, and coral. In addtion, cephalopods are also taken in consideration. 144 taxa are identified and systematically described. Palaeoecological and taphonomic anylsis of the statistically sampled macrobenthos are also discussed. The biostratigraphic sequences along the Cenomanian-Turonian rocks were carried out on the basis of ammonites and other macrobenthic fauna such as corals and bivalves. In order to reconstruct benthic association, 41 statistically sampled were subjected to cluster ananlysis by using Past Programm (Hammer et al., 2001). 10 association and three assemblages were described in order to reconstruct the different depositional enviroments.
Mapping Bushfire Distribution and Burn Severity in West Africa Using Remote Sensing Observations
(2010)
Fire has long been considered to be the main ecological factor explaining the origin and maintenance of West African savannas. It has a very high occurrence in these savannas due to high human pressure caused by strong demographic growth and, concomitantly, is used to transform natural savannas into farmland and is also used as a provider of energy. This study was carried out with the support of the BIOTA project funded by the German ministry for Research and Education. The objective of this study is to establish the spatial and temporal distribution of bushfires during a long observation period from 2000 to 2009 as well as to assess fire impact on vegetation through mapping of the burn severity; based on remote sensing and field data collections. Remote sensing was used for this study because of the advantages that it offers in collecting data for long time periods and on different scales. In this case, the Moderate Resolution Imaging Spectroradiometer (MODIS) satellite instrument at 1km resolution is used to assess active fires, and understand the seasonality of fire, its occurrence and its frequency within the vegetation types on a regional scale. Landsat ETM+ imagery at 30 m and field data collections were used to define the characteristics of burn severity related to the biomass loss on a local scale. At a regional scale, the occurrence of fires and rainfall per month correlated very well (R2 = 0.951, r = -0.878, P < 0.01), which shows that the lower the amount of rainfall, the higher the fire occurrence and vice versa. In the dry season, four fire seasons were determined on a regional scale, namely very early fires, which announce the beginning of the fires, early and late fires making up the peak of fire in December/January and very late fires showing the end of the fire season and the beginning of the rainy season. Considerable fire activity was shown to take place in the vegetation zones between the Forest and the Sahel areas. Within these zones, parts of the Sudano-Guinean and the Guinean zones showed a high pixel frequency, i.e. fires occurred in the same place in many years. This high pixel frequency was also found in most protected areas in these zones. As to the kinds of land cover affected by fire, the highest fire occurrence is observed within the Deciduous woodlands and Deciduous shrublands. Concerning the burn severity, which was observed at a local scale, field data correlated closely with the ΔNBR derived from Landsat scenes of Pendjari National Park (R2 = 0.76). The correlation coefficient according to Pearson is r = 0.84 and according to Spearman-Rho, the correlation coefficient is r = 0.86. Very low and low burn severity (with ΔNBR value from 0 to 0.40) affected the vegetation weakly (0-35 percent of biomass loss) whereas moderate and high burn severity greatly affected the vegetation, leading to up to 100 percent of biomass loss, with the ΔNBR value ranging from 0.41 to 0.99. It can be seen from these results that remotely sensed images offer a tool to determine the fire distribution over large regions in savannas and that the Normalised Burn Ratio index can be applied to West Africa savannas. The outcomes of this thesis will hopefully contribute to understanding and, eventually, improving fire regimes in West Africa and their response to climate change and changes in vegetation diversity.
This work presents a new method to measure model independent viscosities of inhomogeneous materials at high temperatures. Many mechanisms driving volcanic eruptions are strongly influenced by the viscous properties of the participating materials. Since an eruption takes place at temperatures at which these materials (predominantly silicate melts) are not completely molten, typically inhomogeneities, like e.g. equilibrium and non-equilibrium crystals, are present in the system. In order to incorporate such inhomogeneities into objective material parameters the viscosity measurement is based on a rotational viscometer in a wide gap Couette setup. The gap size between the two concentric cylinders was designed as large as possible in order to account for the inhomogeneities. The emerging difficulties concerning the model independent data reduction from measured values to viscosities are solved using an appropriate interpolation scheme. The method was applied to a material representative for the majority of volcanic eruptions on earth: a typical continental basaltic rock (Billstein/Rhön/Germany). The measured viscosities show a strong shear rate dependency, which surprises, because basaltic melt has been, until now, assumed to behave as a Newtonian fluid. Since a non-Newtonian material shows a very different relaxation behavior in the Couette motion compared to a Newtonian one (which, ultimately, does not show any), and a strong relaxation signal was recorded during viscosity measurements, the equations of Couette motion were investigated. The time dependent stress distribution in a material due to a quasi step-like velocity change at the inner Couette radius (i.e. the spindle) was considered. The results show that a material combining a linear shear modulus and a Newtonian viscosity -- a Maxwell material -- cannot quantify the relaxation behavior. This could be considered as a hint, that the widely used Maxwell relaxation times cannot be applied as a 1:1 mapping from microscopic considerations to macroscopic situations.
The urban micro climate has been increasingly recognised as an important aspect for urban planning. Therefore, urban planners need reliable information on the micro climatic characteristics of the urban environment. A suitable spatial scale and large spatial coverage are important requirements for such information. This thesis presents a conceptual framework for the use of airborne hyperspectral data to support urban micro climate characterisation, taking into account the information needs of urban planning. The potential of hyperspectral remote sensing in characterising the micro climate is demonstrated and evaluated by applying HyMap airborne hyperspectral and height data to a case study of the German city of Munich. The developed conceptual framework consists of three parts. The first is concerned with the capabilities of airborne hyperspectral remote sensing to map physical urban characteristics. The high spatial resolution of the sensor allows to separate the relatively small urban objects. The high spectral resolution enables the identification of the large range of surface materials that are used in an urban area at up to sub-pixel level. The surface materials are representative for the urban objects of which the urban landscape is composed. These spatial urban characteristics strongly influence the urban micro climate. The second part of the conceptual framework provides an approach to use the hyperspectral surface information for the characterisation of the urban micro climate. This can be achieved by integrating the remote sensing material map into a micro climate model. Also spatial indicators were found to provide useful information on the micro climate for urban planners. They are commonly used in urban planning to describe building blocks and are related to several micro climatic parameters such as temperature and humidity. The third part of the conceptual framework addresses the combination and presentation of the derived indicators and simulation results under consideration of the planning requirements. Building blocks and urban structural types were found to be an adequate means to group and present the derived information for micro climate related questions to urban planners. The conceptual framework was successfully applied to a case study in Munich. Airborne hyperspectral HyMap data has been used to derive a material map at sub-pixel level by multiple endmember linear spectral unmixing. This technique was developed by the German Research Centre for Geosciences (GFZ) for applications in Dresden and Potsdam. A priori information on building locations was used to support the separation between spectrally similar materials used both on building roofs and non-built surfaces. In addition, surface albedo and leaf area index are derived from the HyMap data. The sub-pixel material map supported by object height data is then used to derive spatial indicators, such as imperviousness or building density. To provide a more detailed micro climate characterisation at building block level, the surface materials, albedo, leaf area index (LAI) and object height are used as input for simulations with the micro climate model ENVI-met. Concluding, this thesis demonstrated the potential of hyperspectral remote sensing to support urban micro climate characterisation. A detailed mapping of surface materials at sub-pixel level could be performed. This provides valuable, detailed information on a large range of spatial characteristics relevant to the assessment of the urban micro climate. The developed conceptual framework has been proven to be applicable to the case study, providing a means to characterise the urban micro climate. The remote sensing products and subsequent micro climatic information are presented at a suitable spatial scale and in understandable maps and graphics. The use of well-known spatial indicators and the framework of urban structural types can simplify the communication with urban planners on the findings on the micro climate. Further research is needed primarily on the sensitivity of the micro climate model towards the remote sensing based input parameters and on the general relation between climate parameters and spatial indicators by comparison with other cities.