Refine
Has Fulltext
- yes (163)
Is part of the Bibliography
- yes (163)
Year of publication
Document Type
- Journal article (112)
- Doctoral Thesis (51)
Keywords
- Tissue Engineering (25)
- tissue engineering (11)
- regenerative medicine (7)
- stem cells (6)
- in vitro (5)
- 3D tissue model (4)
- In-vitro-Kultur (4)
- extracellular matrix (4)
- gene expression (4)
- inflammation (4)
- BMP-2 (3)
- Bordetella pertussis (3)
- In vitro (3)
- Stammzelle (3)
- Zellkultur (3)
- bone regeneration (3)
- chondrocytes (3)
- collagens (3)
- decellularization (3)
- electrospinning (3)
- vascularization (3)
- 3D tumour model (2)
- B cells (2)
- BMP (2)
- Bone morphogenetic protein-2 (2)
- Cancer (2)
- Dünndarm (2)
- Elektrospinnen (2)
- Fibroblasts (2)
- GMP (2)
- Gewebekultur (2)
- Hautmodell (2)
- Hirschsprung disease (2)
- Hyaliner Knorpel (2)
- Immuntherapie (2)
- Implantat (2)
- Kollagen (2)
- Kreuzband (2)
- Ligamentum cruciatum anterius (2)
- Medizinprodukt (2)
- Melanom (2)
- Mundschleimhaut (2)
- Neisseria gonorrhoeae (2)
- Osteoarthritis (2)
- Raman-Spektroskopie (2)
- Regenerative Medizin (2)
- SARS-CoV-2 (2)
- Tumormodell (2)
- Validierung (2)
- Vaskularisation (2)
- Vaskularisierung (2)
- Wundheilung (2)
- anthocyanins (2)
- bioengineering (2)
- biological models (2)
- bioreactor (2)
- blood-brain barrier (BBB) model (2)
- burn wound (2)
- cartilage (2)
- cartilage regeneration (2)
- co-culture (2)
- colorectal cancer (2)
- discriminant analysis (2)
- extracellular vesicles (2)
- growth factor beta (2)
- immunotherapy (2)
- impedance spectroscopy (2)
- infection (2)
- intestinal in vitro model (2)
- invasion (2)
- lung cancer (2)
- mesenchymal stem cells (2)
- migration (2)
- multiple myeloma (2)
- osteoarthritis (2)
- pancreas (2)
- permeability (2)
- phenotype (2)
- principal component analysis (2)
- raman spectroscopy (2)
- rat (2)
- reconstructed human epidermis (2)
- scaffolds (2)
- subcutaneous animal model (2)
- targeted therapy (2)
- therapy (2)
- wound healing (2)
- 1st-line treatment (1)
- 3D (1)
- 3D Modell (1)
- 3D Tumormodell (1)
- 3D in vitro Modell (1)
- 3D in vitro model (1)
- 3D in vitro models (1)
- 3D lung tumor model (1)
- 3D lung tumor tissue models (1)
- 3D model (1)
- 3D models (1)
- 3D scaffolds (1)
- 3D tissue models (1)
- 3D-Elektrode (1)
- 3D-Kultur (1)
- 5-Fluorouracil (1)
- ACL construct (1)
- ATMP (1)
- Activin receptor-like kinase 1 (ALK1) (1)
- Adenocarcinom (1)
- Adenokarzinom (1)
- Adenylate cyclase toxin (1)
- Advanced Therapy Medicinal Products (ATMP) (1)
- Aggregatibacter actinomycetemcomitans (1)
- Akute myeloische Leukämie (1)
- Alternative test methods (1)
- Alternative zum Tierversuch (1)
- Alzheimer′s disease (1)
- Anastomoseninsuffizienz (1)
- Angiogenese (1)
- Anterior Cruciate Ligament (1)
- Antikörper (1)
- Apoptosis (1)
- Arthroseentstehung (1)
- Articular-Cartilage (1)
- Arzneimittel (1)
- Arzneimittelzulassung (1)
- Assay (1)
- Atemwege (1)
- Atemwegsschleimhaut (1)
- Augmentation (1)
- Automation (1)
- B cell receptors (1)
- BMP signaling (1)
- BMP-2 delivery (1)
- BRAF mutation (1)
- BRAF-mutant (1)
- BRAF-mutiert (1)
- BSGC (1)
- Bakterielle Nanocellulose (1)
- Bauchspeicheldrüse (1)
- Beta-catenin (1)
- Bindegewebe (1)
- BioVaSc (1)
- Biocompatibility (1)
- Biodegradable polymer scaffolds (1)
- Biodistribution (1)
- Biokompatibilität (1)
- Biomaterial (1)
- Biomechanical Properties (1)
- Biomedical engineering (1)
- Bioreactor (1)
- Blasenerkrankung (1)
- Blood-brain barrier (1)
- Blut-Hirn-Schranke (1)
- Bone morphogenetic protein 2 (1)
- Bone morphogenetic proteins (BMP9) (1)
- Bone tissue engineering (1)
- Boolean signaling network (1)
- Brustkrebs (1)
- CAR T cell (1)
- CCR2 (1)
- CCR4 (1)
- CNS disease (1)
- CRISPR/Cas-Methode (1)
- CYP induction (1)
- CYP inhibition (1)
- CYR61 (1)
- Caco2 cells (1)
- Carcinoma cells (1)
- Cardiac ventricles (1)
- Cell replacement therapy (1)
- Chemicals (1)
- Collagen (1)
- Compressive Properties (1)
- Cytokeratine (1)
- Data acquisition (1)
- Dezellularisierung (1)
- Diabetes mellitus (1)
- Dickdarmtumor (1)
- Diffusion tensor imaging (1)
- Dosis-Wirkungs-Beziehung (1)
- Draize eye test (1)
- Drug testing (1)
- ECM coating (1)
- EMT (1)
- EVs (1)
- Eigenvectors (1)
- Eisenoxid-Nanopartikel (1)
- Electrochemical Impedance Spectroscopy (1)
- Electrode (1)
- Electrospinning (1)
- Elektrode (1)
- Endothelzelle (1)
- Enteric nervous system (1)
- Enteric neuropathies (1)
- Entwicklung (1)
- Epidermis (1)
- Epidermismodell (1)
- Episkin (1)
- Epithel (1)
- Eriodictyon californicum (1)
- Extrazellulärmatrix (1)
- Eye irritation (1)
- FGF signaling (1)
- FTIR spectroscopy (1)
- Fibroblast (1)
- Fibrose (1)
- Fluorouracil (1)
- Fremdkörpermodell (1)
- GDF-5 (1)
- GLP-1 (1)
- GLUTs (1)
- GUT (1)
- Gastrointestinaltrakt (1)
- Gefitinib (1)
- Gelatine (1)
- Gene regulation (1)
- Genome Editing (1)
- Gewebemodell (1)
- Gewebemodelle (1)
- Glucose transport (1)
- Growth; BMP-2 (1)
- HSP90 inhibitor (1)
- HUVEC (1)
- Halofuginon (1)
- Harnblasenkrankheit (1)
- Haut (1)
- Hautverbrennung (1)
- Head and neck cancers (1)
- Heart (1)
- Hemofiltration (1)
- Herzschrittmacher (1)
- Hirschsprung disease liability (1)
- Human Knee (1)
- Human Medial Meniscus (1)
- Humanparasitologie (1)
- Hydrogel (1)
- Hypertrophic pyloric-stenosis (1)
- Hämophilie A (1)
- IL-1ß (1)
- IL-6 (1)
- In vitro skin irritation testing (1)
- In-vitro (1)
- In-vitro-Testsystem (1)
- In-vivo (1)
- Individualisierte Medizin (1)
- Induced pluripotent stem cells (1)
- Induzierte pluripotente Stammzelle (1)
- Infektionsstudien (1)
- Injuries (1)
- Intestinal pseudoobstruction (1)
- Intestinal stem cell (1)
- Invasion (1)
- Irritable bowel syndrome (1)
- Ischämie (1)
- KRAS biomarker signatures (1)
- KRAS mutation signature (1)
- Kernspintomografie (1)
- Kniegelenk (1)
- Knochen-Morphogenese-Proteine (1)
- Knochenimplantat (1)
- Knochenregeneration (1)
- Knorpelimplantate (1)
- Kohlenstoff (1)
- Kohlenstofffaser (1)
- Krebs <Medizin> (1)
- Kreuzbandersatz (1)
- Kryokonservierung (1)
- Künstliche Ingelligenz (1)
- LCST (1)
- LDH-assay (1)
- Lactatdehydrogenase (1)
- Lgr5 (1)
- Lungenkrebs (1)
- Lungentumor (1)
- MRT (1)
- MSC (1)
- Magen (1)
- Magenchirurgie (1)
- Magenkrankheit (1)
- Magnet-Partikel-Spektroskopie (1)
- Magnetic resonance imaging (1)
- Mamma carcinoma (1)
- Mammakarzinom (1)
- Mandibular continuity defects (1)
- Marketing authorisation of pharmaceuticals (1)
- Marrow stromal cells (1)
- Matrix (1)
- Mechanical deformation (1)
- Mechanisms (1)
- Medicine (1)
- Mesenchymal Stem Cell (1)
- Mesenchymal transition (1)
- Mesenchymale Stammzellen (1)
- Microenvironment (1)
- Mikrowellen (1)
- Minipig (1)
- Model (1)
- Models (1)
- Molekularbiologie (1)
- Monitoring (1)
- Mukosamodell (1)
- Multicenter randomized-trial (1)
- Multilayered skin tissue model (1)
- Mundschleimhautäquivalent (1)
- Myofibroblast differentiation (1)
- NK cells (1)
- NMR (1)
- NOTCH (1)
- NOTES <Chirurgie> (1)
- NRAS mutation (1)
- Nanofaser (1)
- Neisseria meningitidis (1)
- Neuartige Arzneimittel (1)
- Neural crest cells (1)
- Nitric-oxide (1)
- OECD guideline (1)
- OLFM4 (1)
- Onchocerca volvulus (1)
- Onchozerkose (1)
- Open source reconstructed epidermis (1)
- Oral squamous cell carcinoma (1)
- Oralmukosa (1)
- Oralmukosamodell (1)
- Oxide synthase gene (1)
- PLGA (1)
- Paclitaxel (1)
- Pancreatic islet (1)
- Pankreas (1)
- Pankreaskarzinom (1)
- Parasitology (1)
- Partikel (1)
- Perforation <Medizin> (1)
- Perfusion Bioreactor (1)
- Plattenepithelcarcinom (1)
- Pleuramesotheliom (1)
- Polylactid-co-Glycolid (1)
- Preclinical studies (1)
- Primär-basierte immortalisierte Zelllinie (1)
- Primäre Ziliendyskinesie (1)
- Proliferation (1)
- Protein chemistry (1)
- Protein-Tyrosin-Kinasen (1)
- Präklinische Studien (1)
- QPCR (1)
- R57A (1)
- RHE (1)
- RT-qPCR (1)
- Rat mynteric plexus (1)
- Real time quantitative PCR (1)
- Receptor (1)
- Repair (1)
- Reperfusion (1)
- Resistenzentwicklung (1)
- Respiratorisches System (1)
- SGLTs (1)
- SIS/MUC (1)
- Salinomycin (1)
- Salmonella (1)
- Salmonella Typhimurium (1)
- Scaffold bone implant (1)
- Sglt1 (1)
- Silikon (1)
- Sinus floor augmentation (1)
- Skin Tissue Engineering (1)
- Slow-transit constipation (1)
- Smooth-muscle-cells (1)
- Squamous-cell carcinoma (1)
- Stammzellforschung (1)
- Stem cells (1)
- Stem-cell biotechnology (1)
- Stimulation (1)
- Streptococcus oralis (1)
- Stroma (1)
- Swine (1)
- T-Zell-rekrutierende Antikörperkonstrukte (1)
- TEER (1)
- TEER-Wert (1)
- TGF-beta (1)
- TGFβ/BMP signaling (1)
- TNBC (1)
- Targeted therapies (1)
- Term follow-up (1)
- Test system (1)
- Therapeutisches System (1)
- Therapie (1)
- Therapiesimulation (1)
- Tipifarnib (1)
- Tissue (1)
- Tractography (1)
- Triple co-culture (1)
- Tumor models (1)
- Tumorigenicity (1)
- Tumormikroumgebung (1)
- Tumorzelllinien (1)
- Validation (1)
- Vascularized (1)
- Viabilität (1)
- Vivo (1)
- Vorderes Kreuzband (1)
- Wirkstofftestung (1)
- Zell-Migration (1)
- Zelldifferenzierung (1)
- Zellkulturmodell (1)
- acetylsalicylic acid (1)
- acid dissociation (1)
- acute myeloid leukemia (1)
- adenocarcinoma of the lung (1)
- adenylate cyclase toxin (1)
- adhesion (1)
- adults (1)
- aging (1)
- air-liquid interface (1)
- airway epithelia (1)
- airways (1)
- albumins (1)
- algorithm (1)
- alternative to animal testing (1)
- alternatives (1)
- anaesthetics (1)
- anatomy (1)
- animal model (1)
- antagonist (1)
- antennas (1)
- anthocyanin (1)
- antibiotics (1)
- antioxidative (1)
- antitumor peptide (1)
- antiviral activity (1)
- apoptosis (1)
- artificial membrane-permeability (1)
- aspirin (1)
- astaxanthin (1)
- asthmatic bronchial epithelium (1)
- astrocytes (1)
- autologous (1)
- autologous chondrocyte implantation (1)
- automation (1)
- automation & robotics (1)
- bacteria (1)
- bacterial cellulose dressing (1)
- bacterial migration (1)
- bacterial nanocellulose (1)
- bacterial virulence (1)
- barrier models (1)
- benzalkonium chloride (1)
- beta cell (1)
- beta-aminopropionitrile (1)
- beta-cyclodextrin (1)
- betaglycan (1)
- bilberry (1)
- biocompatibility (1)
- biocompatible materials (1)
- bioconjugation (1)
- biofilm (1)
- bioinformatics (1)
- biological barriers (1)
- biological scaffold (1)
- biological scaffolds (1)
- biology (1)
- biomaterial tests (1)
- biomedical engineering (1)
- biomedical materials (1)
- biomimetic 3D tissue model (1)
- bioreactor culture (1)
- biotechnology (1)
- black currant (1)
- blood (1)
- blood glucose regulation (1)
- blood pressure (1)
- blood-brain barrier (1)
- blood-cerebrospinal fluid barrier (1)
- blood‐brain barrier (BBB) (1)
- bone (1)
- bone critical size defect (1)
- bone marrow (1)
- bone morphogenetic protein (1)
- bone morphogenetic protein 2 (BMP2) (1)
- bone morphogenetic protein 9 (BMP9) (1)
- bone morphogenetic proteins (1)
- bone tissue engineering (1)
- boolean in silico models (1)
- brachtydacyly type A2 (1)
- brain endothelial cells (1)
- brain–liver chip (1)
- breast cancer cells (1)
- calcium fluoride nanoparticles (1)
- cancer dissemination (1)
- cancer treatment (1)
- cancers and neoplasms (1)
- carbon fiber (1)
- cardiac device therapy (1)
- cardiac patch (1)
- cardiac tissue (1)
- cardiovascular (1)
- cardiovascular MR methods (1)
- cartilage defectex vivo model (1)
- cartilage repair (1)
- cartilage test system (1)
- cell binding (1)
- cell culture (1)
- cell cultures (1)
- cell cycle and cell division (1)
- cell differentiation (1)
- cell engineering (1)
- cell membrane model (1)
- cell metabolism (1)
- cell migration (1)
- cell proliferation (1)
- cellular biology (1)
- cellular microenvironment (1)
- cellular signalling networks (1)
- central nervous system (1)
- ceramide (1)
- chemokine receptor (1)
- chemoresistance (1)
- chiral resolution (1)
- chondrogenesis (1)
- chondrogenic differentiation (1)
- chondrogenic hypertrophy (1)
- ciliary neurotrophic factor (1)
- ciliostasis (1)
- circular dichroism (1)
- clinical applications (1)
- collagen sponge (1)
- collagen type I hydrogel (1)
- colllagen (1)
- colon (1)
- colony-stimulating factor (1)
- combination of physical vapor deposition and electrochemical etching (1)
- combinatorial drug predictions (1)
- complexation (1)
- computer modelling (1)
- confocal Raman imaging (1)
- core depression (1)
- coreceptor (1)
- corneal endothelium (1)
- corneal epithelium (1)
- corneal equivalent (1)
- corneal storage (1)
- covalent coupling (1)
- critical size defect (1)
- cross-talk (1)
- cryokonservation (1)
- cryostructured scaffolds (1)
- crystal structure (1)
- crystal-structure (1)
- culture techniques (1)
- cultured (1)
- cyclic adenosine monophosphate (1)
- cycloaddition (1)
- cyclodextrin (1)
- cytokine (1)
- cytokines (1)
- cytotoxicity (1)
- defects (1)
- defined humanized test system (1)
- dendritic cell (1)
- dental implants (1)
- development (1)
- diabetes (1)
- differentiation (1)
- diffusion tensor imaging (1)
- dominant-negative mutatio (1)
- drug (1)
- drug delivery (1)
- drug metabolism (1)
- drug permeability screening (1)
- drug resistance (1)
- dry spinning (1)
- dynamic culture (1)
- dynamic culture conditions (1)
- dystrophic RCS rats (1)
- early diagnosis (1)
- ectopic bone formation (1)
- elastic fibers (1)
- elastin (1)
- electrical and electronic engineering (1)
- electrode scaffold (1)
- embryonic stem cell (1)
- embryonic stem cells (1)
- endothelial cells (1)
- endothelial growth factor (1)
- enteric nervous system (1)
- enzyme metabolism (1)
- epidermis (1)
- epithelial cell culture (1)
- epithelial cells (1)
- equipment and supplies (1)
- establishment (1)
- ex vivo model (1)
- experimental models of disease (1)
- expression (1)
- eye irritation testing (1)
- factor binding profiles (1)
- factor-VIII (1)
- fibroblast chemotaxis (1)
- fibroblast growth factor (1)
- fibrosis (1)
- filamentous Salmonella Typhimurium (1)
- fixation (1)
- flavonoids (1)
- follistatin 288 (FST288) (1)
- follistatin 315 (FST315) (1)
- foreign body reaction (1)
- formalin (1)
- fremdkörper assoziierte Reaktion (1)
- full thickness skin (1)
- functional initiators (1)
- gamma-cyclodextrin (1)
- gastrointestinal tract (1)
- gels (1)
- gene encoding noggin (1)
- gene therapy (1)
- genetic engineering (1)
- glucose (1)
- glucose transporter SGLT1 (1)
- glycoprotein (1)
- growth and differentiation factor 5 (1)
- hBMSC (1)
- head and neck squamous cell carcinoma (1)
- heart structure (1)
- heart valve (1)
- heparin binding sites (1)
- heptaocytes (1)
- herpesvirus (1)
- highly porous materials (1)
- host (1)
- host modulation (1)
- human (1)
- human airway mucosa tissue models (1)
- human bruchs membrane (1)
- human exposure (1)
- human heptocytes (1)
- human induced pluripotent stem cells (hiPSCs) (1)
- human induced pluripotent stem cells (hiPSCs)human induced pluripotent stem cells (hiPSCs) (1)
- human liver cells (1)
- human nasal epithelial cells (1)
- human osteosarcoma xenografts (1)
- human respiratory epithelial cells (1)
- human tracheo-bronchial epithelial cells (1)
- humane mesenchymale Stammzellen (1)
- human‐induced pluripotent stem cells (hiPSC) (1)
- hyaline cartilage (1)
- hybrid pacemaker (1)
- hyperlipidemia (1)
- hypoxia inducible factor 1 (1)
- immune cell infiltration (1)
- immunotherapeutics (1)
- immunotherapies (1)
- implant (1)
- in silico simulation (1)
- in situ guided tissue regeneration (1)
- in vitro Modelle (1)
- in vitro model (1)
- in vitro models (1)
- in vitro-Testsystem (1)
- in vivo (1)
- in vivo experiments (1)
- in vivo study (1)
- in-vitro (1)
- in-vitro models (1)
- in-vitro-Modell (1)
- in-vitro-Testsysteme (1)
- induced pluripotent stem cells (1)
- induction (1)
- infectious disease (1)
- inflammation-induced tissue demage (1)
- inflammatory bowel disease (1)
- inflammatory response (1)
- injectable in situ gelling slow release system (1)
- insilico drug screening too (1)
- insulin (1)
- interface (1)
- intestinal enteroids (1)
- intestine (1)
- invasiveness (1)
- invitro (1)
- inflammatory response (1)
- iron metabolism (1)
- irradiation (1)
- islets of Langerhans (1)
- kinetics (1)
- kolorektales Karzinom (1)
- label-free analysis (1)
- laser microdissection (1)
- ligand binding (1)
- ligand-receptor complex (1)
- ligand-receptor promiscuity (1)
- lipids (1)
- liposome (1)
- living cells (1)
- lncRNAs (1)
- long-term (1)
- lower critical solution temperature (1)
- lung and intrathoracic tumors (1)
- magnetic resonance imaging (MRI) (1)
- malignant tumors (1)
- manufacturing (1)
- measels virus (1)
- measles virus (1)
- mechanisms of disease (1)
- medicine (1)
- melanoma metastases (1)
- membrane receptor signaling (1)
- memory (1)
- meningococcus (1)
- mesenchymal cells (1)
- mesenchymal stromal cell (1)
- mesenchymal tissues (1)
- mesothelium (1)
- metabolic flux analysis (1)
- metallo-supramolecular polymer (1)
- miRNAs (1)
- microbe carrier (1)
- microenvironment (1)
- microparticles (1)
- microphysiologic 3D tumour model (1)
- microphysiological systems (MPS) (1)
- microplastics (1)
- microvascular endothelial cells (1)
- microwave radiation (1)
- midazolam (1)
- modular tumor tissue models (1)
- moisture balance (1)
- molecular biology (1)
- molecular diagnostics (1)
- molecular mechanism (1)
- morphogenetic protein receptors (1)
- motility disorders (1)
- multi-organ chip (1)
- multicellular tumor spheroids (1)
- multifunctional nanoparticles (1)
- multilayered skin (1)
- multimodal imaging (1)
- multipotent fetal neural stem cells (fNSCs) (1)
- multivariate data analysis (1)
- murine (1)
- mutagenesis (1)
- myenteric plexus (1)
- nanoparticles (1)
- nanoplastics (1)
- nanotopographical surfaces (1)
- necrosis-factor-alpha (1)
- necrotic cell death (1)
- neural stem-cell (1)
- neurology (1)
- neuronal electrodes (1)
- neurotoxicity (1)
- neurovascular unit in vitro (1)
- neutrophil transmigration (1)
- non-invasive biomarkers (1)
- occupancy (1)
- olfactomedin 4 (1)
- on-a-chip (1)
- open-access database (1)
- open-source epidermis (1)
- oragnoids (1)
- oral mucosa model (1)
- orales Plattenepithelkarzinomäquivalent (1)
- organ-on-a-chip (1)
- organotypic (1)
- organotypic oral mucosa (1)
- osteoblasts (1)
- osteochondral allografts (1)
- osteochondral biopsy (1)
- osteochondral lesion (1)
- osteogenesis (1)
- osteogenesis imperfecta (1)
- osteogenic differentiation (1)
- osteoporosis (1)
- outgrowth endothelial cells (1)
- ovarian cancer (1)
- oxidative DNA damage (1)
- pancreatic cancer (1)
- pancreatic differentiation (1)
- pancreatic islet cytomorphology (1)
- pancreatic islet function (1)
- parasitology (1)
- perfused hydrogel (1)
- perfusion-based bioreactor system (1)
- peritoneal metastasis (1)
- pharmaceutical applications (1)
- phosphatidylserine (1)
- photoluminescence (1)
- physiology (1)
- platelet-derived growth factor (1)
- pluripotent stem cells (1)
- polymer (1)
- polymerization (1)
- polymers (1)
- polypeptoids (1)
- postpolymerization modification (1)
- precision-cut lung slices (1)
- preclinical drug discovery (1)
- primary cell isolation (1)
- primary cells (1)
- primary ciliary dyskinesia (1)
- primary human hepatocytes (1)
- primary-cell-derived immortalized cell line (1)
- progenitor cells (1)
- progenitors (1)
- protein immobilization (1)
- proteins (1)
- pulmonary drug-delivery (1)
- pulmonary imaging (1)
- pulses (1)
- quanititative characterization (1)
- quantification (1)
- randomized clinical trial (1)
- reactive oxygen species (1)
- real time PCR (1)
- receptor type III (1)
- reflection (1)
- rekombinante Spinnseide (1)
- relaxometry (1)
- repair (1)
- replacement (1)
- respiratory syncytial virus (1)
- responses (1)
- retinal pigment epithelium (1)
- rhBMP–2 (1)
- ring-opening polymerization (1)
- salicylic acid (1)
- salivary gland neoplasia (1)
- salivary gland tumor (1)
- salivary gland tumors (1)
- salivary glands (1)
- scaffold (1)
- scanning electron microscopy (1)
- secondary lung tumors (1)
- secondary wound dressing (1)
- segmental collapse (1)
- sevoflurane (1)
- sheep model (1)
- signal integration (1)
- signal specification (1)
- signal tranduction (1)
- signal transduction (1)
- signaling (1)
- signaling pathways (1)
- site directed immobilization (1)
- site-specific immobilization (1)
- skin anatomy (1)
- skin equivalent (1)
- skin equivalents (1)
- skin model (1)
- skin models (1)
- skin physiology (1)
- small intestinal submucosa (1)
- small intestinal submucosa scaffold (1)
- sodium channels (1)
- sol-gel chemistry (1)
- solid tumors (1)
- solid tumour (1)
- solubility (1)
- sphingosine-1-phosphate (1)
- starch (1)
- stemness (1)
- sterubin (1)
- stimulation (1)
- stratification (1)
- stromal cells (1)
- stromal tissues (1)
- subfoveal choroidal neovascularization (1)
- subretinal space (1)
- superfamily (1)
- supermolecular carrier systems (1)
- surgical oncology (1)
- systemic inflammatory response syndrome (1)
- t-cell recruting antibody constructs (1)
- targeted combination therapy (1)
- technology (1)
- therapy simulation (1)
- tight junction (1)
- tissue culture (1)
- tissue model (1)
- tissue preparation (1)
- tissue remodeling (1)
- toxicity (1)
- toxicology (1)
- trachea (1)
- tracheal cytotoxin (1)
- trafficking (1)
- transcapillary pressure gradient (1)
- transcriptomics (1)
- transforming growth factor-beta 1 (1)
- translational research (1)
- translocation (1)
- transplantation (1)
- transport studies (1)
- tumor cells (1)
- tumor model systems (1)
- tumor test system (1)
- tumormicroenvironment (1)
- tumour (1)
- tumour microenvironment (1)
- tumour stroma (1)
- upcyte hepatocytes (1)
- validation (1)
- vascular normalization (1)
- vascular progenitor (1)
- vascular surgery (1)
- vascularized scaffold (1)
- vesicle-based barrier (1)
- viability (1)
- viral epidemiology (1)
- viral infection (1)
- virulence (1)
- weight-bearing (1)
- wound model (1)
- wound physiology (1)
- xenotransplantation (1)
- zielgerichtete Behandlung (1)
- zinc oxide nanoparticles (1)
- α-Cell (1)
- α-cell (1)
- β-Cell (1)
- β-cell (1)
Institute
- Lehrstuhl für Tissue Engineering und Regenerative Medizin (163) (remove)
Sonstige beteiligte Institutionen
- Fraunhofer (1)
- Fraunhofer Institute Interfacial Engineering and Biotechnology (IGB) (1)
- Fraunhofer Institute for Integrierte Schaltungen (IIS) (1)
- IZKF (Interdisziplinäres Zentrum für Klinische Forschung), Universität Würzburg (1)
- Medizinische Universität Innsbruck (1)
- New York Blood Center (1)
- Queensland University of Technology (1)
Compared to cell therapy, where cells are injected into a defect region, the treatment of heart infarction with cells seeded in a vascularized scaffold bears advantages, such as an immediate nutrient supply or a controllable and persistent localization of cells. For this purpose, decellularized native tissues are a preferable choice as they provide an in vivo-like microenvironment. However, the quality of such scaffolds strongly depends on the decellularization process. Therefore, two protocols based on sodium dodecyl sulfate or sodium deoxycholate were tailored and optimized for the decellularization of a porcine heart. The obtained scaffolds were tested for their applicability to generate vascularized cardiac patches. Decellularization with sodium dodecyl sulfate was found to be more suitable and resulted in scaffolds with a low amount of DNA, a highly preserved extracellular matrix composition, and structure shown by GAG quantification and immunohistochemistry. After seeding human endothelial cells into the vasculature, a coagulation assay demonstrated the functionality of the endothelial cells to minimize the clotting of blood. Human-induced pluripotent-stem-cell-derived cardiomyocytes in co-culture with fibroblasts and mesenchymal stem cells transferred the scaffold into a vascularized cardiac patch spontaneously contracting with a frequency of 25.61 ± 5.99 beats/min for over 16 weeks. The customized decellularization protocol based on sodium dodecyl sulfate renders a step towards a preclinical evaluation of the scaffolds.
Cardiovascular diseases are considered the leading cause of death worldwide according to the World Health Organization. Heart failure is the last stage of most of these diseases, where loss of myocardium leads to architectural and functional decline.
The definitive treatment option for patients with CVDs is organ or tissue transplantation, which relies on donor availability. Therefore, generating an autologous bioengineered myocardium or heart could overcome this limitation. In addition, generating cardiac patches will provide ventricular wall support and enable reparative stem cells delivery to damaged areas. Although many hurdles still exist, a good number of researches have attempted to create an engineered cardiac tissue which can induce endogenous cardiac repair by replacing damaged myocardium.
The present study provided cardiac patches in two models, one by a detergent coronary perfusion decellularization protocol that was optimized, and the other that resulted in a 3D cell-free extracellular matrix with intact architecture and preserved s-glycosaminoglycan and vasculature conduits. Perfusion with 1% Sodium dodecyle sulfate (SDS) under constant pressure resulted in cell-free porcine scaffold within two and cell-free rat scaffold in 7 days, whereas scaffold perfused with 4% sodium deoxycholate (SDO) was not able to remove cells completely. Re-reendothelialization of tissue vasculature was obtained by injecting human microvascular endothelial cell and human fibroblast in 2:1 ratio in a dynamic culture. One-week later, CD31 positive cells and endothelium markers were observed, indicating new blood lining. Moreover, functionality test of re-endothelialized tissue revealed improvement in clotting seen in decellularized tissues. When the tissue was ready to be repopulated, porcine induced pluripotent stem cells (PiPSc) were generated by transfected reprogramming of porcine skin fibroblast and then differentiated to cardiac cells following a robust protocol, for an autologous cardiac tissue model. However, due to the limitation in the PiPSc cell number, alternatively, human induced pluripotent stem cells generated cardiac cells were used.
For reseeding a coculture of human iPSc generated cardiac cells, human mesenchymal stem cells and human fibroblast in 2:1:1 ratio respectively were used in a dynamic culture for 6-8 weeks. Contractions at different areas of the tissue were recorded at an average beating rate of 67 beats/min. In addition, positive cardiac markers (Troponin T), Fibroblast (vemintin), and mesenchymal stem cells (CD90) were detected. Not only that, but by week 3, MSC started differentiating to cardiac cells progressively until few CD90 positive cells were very few by week 6 with increasing troponin t positive cells in parallel. Electrophysiological and drug studies were difficult to obtain due to tissue thickness and limited assessment sources. However, the same construct was established using small intestine submucosa (SISer) scaffold, which recorded a spontaneous beating rate between 0.88 and 1.2 Hz, a conduction velocity of 23.9 ± 0.74 cm s−1, and a maximal contraction force of 0.453 ± 0.015 mN. Moreover, electrophysiological studies demonstrated a drug-dependent response on beating rate; a higher adrenalin frequency was revealed in comparison to the untreated tissue and isoproterenol administration, whereas a decrease in beating rate was observed with propranolol and untreated tissue.
The present study demonstrated the establishment of vascularized cardiac tissue, which can be used for human clinical application.
Integrated approaches using different in vitro methods in combination with bioinformatics can (i) increase the success rate and speed of drug development; (ii) improve the accuracy of toxicological risk assessment; and (iii) increase our understanding of disease. Three-dimensional (3D) cell culture models are important building blocks of this strategy which has emerged during the last years. The majority of these models are organotypic, i.e., they aim to reproduce major functions of an organ or organ system. This implies in many cases that more than one cell type forms the 3D structure, and often matrix elements play an important role. This review summarizes the state of the art concerning commonalities of the different models. For instance, the theory of mass transport/metabolite exchange in 3D systems and the special analytical requirements for test endpoints in organotypic cultures are discussed in detail. In the next part, 3D model systems for selected organs liver, lung, skin, brain are presented and characterized in dedicated chapters. Also, 3D approaches to the modeling of tumors are presented and discussed. All chapters give a historical background, illustrate the large variety of approaches, and highlight up- and downsides as well as specific requirements. Moreover, they refer to the application in disease modeling, drug discovery and safety assessment. Finally, consensus recommendations indicate a roadmap for the successful implementation of 3D models in routine screening. It is expected that the use of such models will accelerate progress by reducing error rates and wrong predictions from compound testing.
The Gram-negative Epsilonproteobacterium Campylobacter jejuni is currently the most prevalent bacterial foodborne pathogen. Like for many other human pathogens, infection studies with C. jejuni mainly employ artificial animal or cell culture models that can be limited in their ability to reflect the in-vivo environment within the human host. Here, we report the development and application of a human three-dimensional (3D) infection model based on tissue engineering to study host-pathogen interactions. Our intestinal 3D tissue model is built on a decellularized extracellular matrix scaffold, which is reseeded with human Caco-2 cells. Dynamic culture conditions enable the formation of a polarized mucosal epithelial barrier reminiscent of the 3D microarchitecture of the human small intestine. Infection with C. jejuni demonstrates that the 3D tissue model can reveal isolate-dependent colonization and barrier disruption phenotypes accompanied by perturbed localization of cell-cell junctions. Pathogenesis-related phenotypes of C. jejuni mutant strains in the 3D model deviated from those obtained with 2D-monolayers, but recapitulated phenotypes previously observed in animal models. Moreover, we demonstrate the involvement of a small regulatory RNA pair, CJnc180/190, during infections and observe different phenotypes of CJnc180/190 mutant strains in 2D vs. 3D infection models. Hereby, the CJnc190 sRNA exerts its pathogenic influence, at least in part, via repression of PtmG, which is involved in flagellin modification. Our results suggest that the Caco-2 cell-based 3D tissue model is a valuable and biologically relevant tool between in-vitro and in-vivo infection models to study virulence of C. jejuni and other gastrointestinal pathogens.
In vitro models of the human blood-brain barrier (BBB) are highly desirable for drug development. This study aims to analyze a set of ten different BBB culture models based on primary cells, human induced pluripotent stem cells (hiPSCs), and multipotent fetal neural stem cells (fNSCs). We systematically investigated the impact of astrocytes, pericytes, and NSCs on hiPSC-derived BBB endothelial cell function and gene expression. The quadruple culture models, based on these four cell types, achieved BBB characteristics including transendothelial electrical resistance (TEER) up to 2,500 Ω cm\(^{2}\) and distinct upregulation of typical BBB genes. A complex in vivo-like tight junction (TJ) network was detected by freeze-fracture and transmission electron microscopy. Treatment with claudin-specific TJ modulators caused TEER decrease, confirming the relevant role of claudin subtypes for paracellular tightness. Drug permeability tests with reference substances were performed and confirmed the suitability of the models for drug transport studies.
Translating basic biological knowledge into applications remains a key issue for effectively tackling neurodegenerative, neuroinflammatory, or neuroendocrine disorders. Efficient delivery of therapeutics across the neuroprotective blood‐brain barrier (BBB) still poses a demanding challenge for drug development targeting central nervous system diseases. Validated in vitro models of the BBB could facilitate effective testing of drug candidates targeting the brain early in the drug discovery process during lead generation. We here review the potential of mono‐ or (isogenic) co‐culture BBB models based on brain capillary endothelial cells (BCECs) derived from human‐induced pluripotent stem cells (hiPSCs), and compare them to several available BBB in vitro models from primary human or non‐human cells and to rodent in vivo models, as well as to classical and widely used barrier models [Caco‐2, parallel artificial membrane permeability assay (PAMPA)]. In particular, we are discussing the features and predictivity of these models and how hiPSC‐derived BBB models could impact future discovery and development of novel CNS‐targeting therapeutics.
Salivary gland tumors (SGTs) are a relevant, highly diverse subgroup of head and neck tumors whose entity determination can be difficult. Confocal Raman imaging in combination with multivariate data analysis may possibly support their correct classification. For the analysis of the translational potential of Raman imaging in SGT determination, a multi-stage evaluation process is necessary. By measuring a sample set of Warthin tumor, pleomorphic adenoma and non-tumor salivary gland tissue, Raman data were obtained and a thorough Raman band analysis was performed. This evaluation revealed highly overlapping Raman patterns with only minor spectral differences. Consequently, a principal component analysis (PCA) was calculated and further combined with a discriminant analysis (DA) to enable the best possible distinction. The PCA-DA model was characterized by accuracy, sensitivity, selectivity and precision values above 90% and validated by predicting model-unknown Raman spectra, of which 93% were classified correctly. Thus, we state our PCA-DA to be suitable for parotid tumor and non-salivary salivary gland tissue discrimination and prediction. For evaluation of the translational potential, further validation steps are necessary.
To improve and focus preclinical testing, we combine tumor models based on a decellularized tissue matrix with bioinformatics to stratify tumors according to stage-specific mutations that are linked to central cancer pathways. We generated tissue models with BRAF-mutant colorectal cancer (CRC) cells (HROC24 and HROC87) and compared treatment responses to two-dimensional (2D) cultures and xenografts. As the BRAF inhibitor vemurafenib is—in contrast to melanoma—not effective in CRC, we combined it with the EGFR inhibitor gefitinib. In general, our 3D models showed higher chemoresistance and in contrast to 2D a more active HGFR after gefitinib and combination-therapy. In xenograft models murine HGF could not activate the human HGFR, stressing the importance of the human microenvironment. In order to stratify patient groups for targeted treatment options in CRC, an in silico topology with different stages including mutations and changes in common signaling pathways was developed. We applied the established topology for in silico simulations to predict new therapeutic options for BRAF-mutated CRC patients in advanced stages. Our in silico tool connects genome information with a deeper understanding of tumor engines in clinically relevant signaling networks which goes beyond the consideration of single drivers to improve CRC patient stratification.
Cancer remains after cardiovascular diseases the leading cause of death worldwide and an estimated 8.2 million people died of it in 2012. By 2030, 13 million cancer deaths are expected due to the growth and ageing of the population. Hereof, colorectal cancer (CRC) is the third most common cancer in men and the second in women with a wide geographical variation across the world. Usually, CRC begins as a non-cancerous growth leading to an adenomatous polyp, or adenoma, arising from glandular cells. Since research has brought about better understanding of the mechanisms of cancer development, novel treatments such as targeted therapy have emerged in the past decades. Despite that, up to 95% of anticancer drugs tested in clinical phase I trials do not attain a market authorisation and hence these high attrition rates remain a key challenge for the pharmaceutical industry, making drug development processes enormously costly and inefficient. Therefore, new preclinical in vitro models which can predict drug responses in vivo more precisely are urgently needed. Tissue engineering not only provides the possibility of creating artificial three-dimensional (3D) in vitro tissues, such as functional organs, but also enables the investigation of drug responses in pathological tissue models, that is, in 3D cancer models which are superior to conventional two-dimensional (2D) cell cultures on petri dishes and can overcome the limitations of animal models, thereby reducing the need for preclinical in vivo models. In this thesis, novel 3D CRC models on the basis of a decellularised intestinal matrix were established. In the first part, it could be shown that the cell line SW480 exhibited different characteristics when grown in a 3D environment from those in conventional 2D culture. While the cells showed a mesenchymal phenotype in 2D culture, they displayed a more pronounced epithelial character in the 3D model. By adding stromal cells (fibroblasts), the cancer cells changed their growth pattern and built tumour-like structures together with the fibroblasts, thereby remodelling the natural mucosal structures of the scaffold. Additionally, the established 3D tumour model was used as a test system for treatment with standard chemotherapeutic 5-fluorouracil (5-FU). The second part of the thesis focused on the establishment of a 3D in vitro test system for targeted therapy. The US Food and Drug Administration has already approved of a number of drugs for targeted therapy of specific types of cancer. For instance, the small molecule vemurafenib (PLX4032, Zelboraf™) which demonstrated impressive response rates of 50–80% in melanoma patients with a mutation of the rapidly accelerated fibrosarcoma oncogene type B (BRAF) kinase which belongs to the mitogen active protein kinase (MAPK) signalling pathway. However, only 5% of CRC patients harbouring the same BRAF mutation respond to treatment with vemurafenib. An explanation for this unresponsiveness could be a feedback activation of the upstream EGFR, reactivating the MAPK pathway which sustains a proliferative signalling. To test this hypothesis, the two early passage cell lines HROC24 and HROC87, both presenting the mutation BRAF V600E but differing in other mutations, were used and their drug response to vemurafenib and/or gefitinib was assessed in conventional 2D cell culture and compared to the more advanced 3D model. Under 3D culture conditions, both cell lines showed a reduction of the proliferation rate only in the combination therapy approach. Furthermore, no significant differences between the various treatment approaches and the untreated control regarding apoptosis rate and viability for both cell lines could be found in the 3D tumour model which conferred an enhanced chemoresistance to the cancer cells. Because of the observed unresponsiveness to BRAF inhibition by vemurafenib as can be seen in the clinic for patients with BRAF mutations in CRC, the cell line HROC87 was used for further xenografting experiments and analysis of activation changes in the MAPK signalling pathway. It could be shown that the cells presented a reactivation of Akt in the 3D model when treated with both inhibitors, suggesting an escape mechanism for apoptosis which was not present in cells cultured under conventional 2D conditions. Moreover, the cells exhibited an activation of the hepatocyte growth factor receptor (HGFR, c-Met) in 2D and 3D culture, but this was not detectable in the xenograft model. This shows the limitations of in vivo models. The results suggest another feedback activation loop than that to the EGFR which might not primarily be involved in the resistance mechanism. This reflects the before mentioned high attrition rates in the preclinical drug testing.
Background: Culturing of cells is typically performed on standard tissue culture plates generating growth conditions, which in general do not reflect the native three-dimensional cellular environment. Recent investigations provide insights in parameters, which strongly affect the general cellular behavior triggering essential processes such as cell differentiation. The physical properties of the used material, such as stiffness, roughness, or topology, as well as the chemical composition of the cell-surface interface are shown to play a key role in the initiation of particular cellular responses. Methods: We extended our previous research, which identified thin films of metallo-supramolecular coordination polyelectrolytes (MEPEs) as substrate to trigger the differentiation of muscular precursor cells. Results: Here, we show that the same MEPEs similarly stimulate the osteogenic differentiation of pre-osteoblasts. Remarkably, MEPE modified surfaces also trigger the differentiation of primary bone derived mesenchymal stem cells (BMSCs) towards the osteogenic lineage. Conclusion: This result leads to the conclusion that these surfaces individually support the specification of cell differentiation toward lineages that correspond to the natural commitment of the particular cell types. We, therefore, propose that Fe-MEPEs may be used as scaffold for the treatment of defects at least in muscular or bone tissue.
Diabetes mellitus is an incurable, metabolic disease, which is associated with severe long-term complications. The in vitro generation of pancreatic β-cells from human induced pluripotent stem cells (hiPSCs) represent a promising strategy for a curative therapy of diabetes mellitus. However, current differentiation strategies largely fail to produce functional β-cells in vitro and require an additional in vivo transplantation to achieve terminal maturation. Previous studies demonstrated a beneficial effect of the extracellular matrix (ECM) on the survival and sustained function of adult, isolated islets of Langerhans. This raises the question whether organ-specific cell-ECM interactions might represent the missing link driving the final stage of β-cell development. In order to address this issue, this study investigated the impact of the pancreas ECM on in vitro β-cell differentiation and its use for the establishment of a pancreatic endocrine organ model.
To this purpose, a pancreas-specific ECM scaffolds (PanMa) was derived from porcine pancreata using whole organ decellularization with Sodium Deoxycholate. In a first step, the generated PanMa was thoroughly characterized using (immuno-) histological stainings, scanning electron microscopy and DNA quantification as well as perfusion and recellularization experiments with endothelial cells. Based on these data, a scoring system (PancScore) for a standardized PanMa generation was developed. Next, the generated PanMa was tested for the presence of tissue-specific ECM features. Therefore, the biophysical and physico-structural characteristics, such as rigidity, porosity and hygroscopy were analyzed using rheological measurements, particle diffusion analyses as well as a water evaporation assay and compared to the properties of ECM scaffolds derived from porcine small intestine (SISser) and lung (LungMa) to examine organ-specific scaffold cues. Following the thorough scaffold characterization, the impact of the PanMa on pluripotency and early development of hiPSC was studied. To this purpose, gene and protein expression of hiPSCs during maintenance culture and spontaneous differentiation on the PanMa were assessed. In a next step, the impact of the PanMa on the pancreatic endocrine differentiation of hiPSCs was tested. Therefore, the PanMa was used as a liquid media supplement or as a solid scaffold during the directed differentiation of hiPSC towards either pancreatic hormone-expressing cells (Rezania et al. 2012; Rezania et al. 2014) or maturing β-cells (Rezania et al. 2014). The impact of the PanMa on the generated cells was examined by gene expression analysis, immunohistochemical staining of important stage markers, as well as glucose stimulated insulin secretion assays. In a last part of this study, the potential of the PanMa for the prolonged culture of hiPSC derived endocrine cells for the establishment of an in vitro organ model of the endocrine pancreas was examined. Therefore, a PanMa-derived hydrogel was generated and used for the encapsulation and culture of hiPSC-derived hormone-expressing cells (HECs). The influence of the PanMa-hydrogel culture was analyzed on gene, protein and functional level by gene expression analysis, immunohistochemical stainings and glucose stimulated insulin secretion.
Whole organ decellularization resulted in the generation of an acellular PanMa scaffold, with low amounts of residual DNA and a preserved ECM micro- and ultrastructure, including important ECM components, such as collagen I, III and IV. Furthermore, the PanMa maintained an intact vessel system and was verified as cytocompatible as demonstrated by the successful recellularization of the arterial system with human endothelial cells. In comparison to SISser and LungMa, the PanMa was characterized as a relative soft, hygroscopic scaffold with a collagen-fiber based structure. Furthermore, the findings indicate that the ECM-specific properties have a relevant effect on the stem cell character and early multi-lineage decisions of hiPSCs. In this regard, maintenance of hiPSCs on the PanMa resulted in a slightly changed expression of pluripotency genes (OCT4, SOX2 and NANOG) and a weak immunohistochemical signal for NANOG protein, indicating a PanMa-dependent impact on hiPSC pluripotency. Strikingly, this presumption was corroborated by the finding that culture on the PanMa promoted an endodermal development of hiPSCs during spontaneous differentiation. In line with that, pancreatic differentiation of hiPSC on both the PanMa and SISser resulted in a significant decrease of glucagon and somatostatin gene expression as well as an unaltered insulin expression, suggesting an ECM-driven suppression of the development of non β-cell endocrine cells. However, this change did not result in an improved glucose stimulated insulin secretion of the generated HECs. Moreover, use of the PanMa as a hydrogel allowed prolonged culture of these cells in a defined culture system. HECs were viable after 21 days of culture, however already showed an altered islet morphology as well as a slightly decreased glucose stimulated insulin secretion.
Altogether, this study demonstrates a relevant biological effect of tissue specific ECM cues on the in vitro differentiation of hiPSCs. More specifically, the data indicate an involvement of the ECM in the endocrine commitment of hiPSC-derived pancreatic cells during directed differentiation highlighting the ECM as an important regulator of pancreatic development. Collectively, these findings emphasize the relevance of the ECM for the fabrication of functional hiPSC-derived cell types and suggest a much stronger consideration of organ specific ECM cues for tissue engineering approaches as well as clinical translation in regenerative medicine.
The fine-tuning of glucose uptake mechanisms is rendered by various glucose transporters with distinct transportcharacteristics. In the pancreatic islet, facilitative diffusion glucose transporters (GLUTs), and sodium-glucosecotransporters (SGLTs) contribute to glucose uptake and represent important components in the glucose-stimulatedhormone release from endocrine cells, therefore playing a crucial role in blood glucose homeostasis. This reviewsummarizes the current knowledge aboutcell type-specific expression profiles as well as proven and putative functionsof distinct GLUT and SGLT family members in the human and rodent pancreatic islet and further discusses their possibleinvolvement in onset and progression ofdiabetes mellitus. In context of GLUTs, we focus on GLUT2, characterizing themain glucose transporter in insulin-secretingβ-cells in rodents. In addition, we discuss recent data proposing that otherGLUT family members, namely GLUT1 and GLUT3, render this task in humans. Finally, we summarize latest infor-mation about SGLT1 and SGLT2 as representatives of the SGLT family that have been reported to be expressed predominantly in the α-cell population with a suggested functional role in the regulation of glucagon release
Hintergrund
Jede Implantation alloplastischer Materialien führt durch Aktivierung der körpereigenen Immunabwehr zu einer Fremdkörperreaktion. An der Synthese der Extrazellulärmatrix und der entstehenden Kollagenkapsel sind insbesondere Makrophagen und Fibroblasten beteiligt. Diese Reaktionen können die Material-Funktionsfähigkeit abschwächen, aufheben oder zu deren operativer Entfernung zwingen.
Fragestellung und Ziele
Spinnenseide ist ein Material mit hoher Biokompatibilität. Nachdem es gelungen ist, Spinnenseide rekombinant herzustellen, soll untersucht werden, wie sich die Verträglichkeit alloplastischer Materialien durch eine Beschichtung mit biotechnologisch hergestellter Spinnenseide beeinflussen lässt.
Eine weitere Möglichkeit ist der TGF-β-Synthese-Inhibitor Halofuginon, der ebenfalls hinsichtlich seiner Potenz, die Ausbildung einer Fibrosekapsel zu vermindern, untersucht werden soll.
Methodik
Anhand von in-vitro-Untersuchungen wurden die bei der Fremdkörperreaktion beteiligten Zelltypen auf ihr Proliferationsverhalten und die Expression unterschiedlicher Genprodukte hinsichtlich bestehender Unterschiede zwischen den jeweiligen Oberflächenbeschichtungen untersucht. Es wurden immunhistochemische Färbungen zum Nachweis spezifischer Oberflächenantigene, Bestimmungen von ATP- und DNA-Gehalt als Maß für die Zellzahl, sowie molekulargenetische Untersuchungen hinsichtlich der Expression relevanter Markergene (rtPCR) durchgeführt.
Ergebnisse
Eine Beschichtung mit rekombinanter Spinnseide führt - im Vergleich zu reinen Silikonimplantaten - zu einer verzögerten und reduzierten Immunreaktion. Die EZM-Synthese und die damit verbundene fremdkörperassoziierte Fibrose werden vermindert und so die Biokompatibilität alloplastischer Materialien gesteigert.
In Deutschland erkranken jährlich etwa 500.000 Menschen an Krebs, wovon circa
12.000 die Diagnose „Leukämie“ gestellt bekommen [1]. Unter den Leukämien weist
die akute myeloische Leukämie (AML) die ungünstigste Prognose auf, sodass hier
erheblicher Forschungsbedarf besteht. Zusätzlich schnitten viele potentielle Therapeutika,
die sich in bisherigen präklinischen Testsystemen als vielversprechend erwiesen
haben, in klinischen Studien schlecht ab [8]. Ziel dieser Arbeit war daher die
Etablierung eines 3D in vitro Blutgefäß-/Gewebemodells als verbessertes präklinisches
System zur Testung von Therapeutika, die zur erfolgreichen Behandlung von
Leukämien beitragen sollen.
Das 3D Blutgefäßmodell bestand aus humanen primären Endothelzellen, welche
als Monolayer auf der Serosaseite einer dezellularisierten, porzinen, intestinalen Kollagenmatrix
(SIS-Ser) wuchsen. Nach 14-tägiger Zellkultur wurden dem Versuchsansatz
entsprechend nichtadhärente THP-1 Zellen (AML-M5-Zelllinie) und Tipifarnib
oder entsprechende Kontrolllösungen beziehungsweise bimolekulare Antikörperkonstrukte
mit PBMCs als Effektorzellen hinzupipettiert. Nach 5-tägiger Inkubation
mit Tipifarnib beziehungsweise 24-stündiger Behandlung mit Antikörperkonstrukten
wurde der therapiebedingte Anstieg der Apoptoserate in den malignen THP-1 Zellen
mittels durchflusszytometrischer Analyse der Modellüberstände ermittelt. Zum
Ausschluss verbliebener und durchflusszytometrisch zu analysierender Zellen wurde,
stellvertretend für alle Suspensionszellen, eine Anti-CD13/DAB-Färbung durchgeführt,
welche negativ ausfiel. Mögliche Kollateralschäden am Endothel wurden
mittels histologischen Färbemethoden an Gewebeparaffinschnitten untersucht.
In der Durchflusszytometrie zeigte Tipifarnib sowohl im 2D als auch im 3D Modell
äquivalente, dosisabhängige und antileukämische Auswirkungen auf die THP-1 Zellen.
Bei Applikation der Antikörperkonstrukte ließ lediglich die Kombination beider Hemibodies signifikante Effekte auf die THP-1 Zellen erkennen. Dabei zeigten sich
bei konstanten Konzentrationen der Antikörperkonstrukte im 3D Modell deutlich
höhere Apoptoseraten (58%) als im 2D Modell (38%). Stellt man Vergleiche von
Tipifarnib mit den T-Zell-rekrutierenden Antikörperkonstrukten an, so ließen sich
im 2D Modell ähnliche Apoptoseraten in den THP-1 Zellen erzielen (jeweils 38% bei
Anwendung von 500 nM Tipifarnib). In den 3D Modellen erzielten jedoch die niedriger
konzentrierten Antikörperkonstrukte bei kürzerer Inkubationsdauer eine noch
höhere spezifische Apoptoserate in den THP-1 Zellen (im Mittel 58%) als 500 nM
Tipifarnib (mittlere Apoptoserate 40%). Bezüglich der Nebenwirkungen ließ sich
im 3D Modell nach Applikation von Antikörperkonstrukten kein wesentlicher Einfluss
auf das Endothel erkennen, während Tipifarnib/DMSO als auch die mit DMSO
versetzten Kontrolllösungen zu einer dosisabhänigen Destruktion des ursprünglichen
Endothelzellmonolayers führten. Damit stellt die hier beschriebene, hoch spezifische,
Hemibody-vermittelte Immuntherapie einen vielversprechenden Ansatz für zukünftige
onkologische Therapien dar.
Mithilfe des etablierten humanen 3D in vitro Modells konnte im Vergleich zur
konventionellen Zellkultur eine natürlichere Mikroumgebung für Zellen geschaffen
und die Auswirkungen der Testsubstanzen sowohl auf maligne Zellen, als auch auf
die Gefäßstrukturen untersucht werden.
The human pathogen Bordetella pertussis targets the respiratory epithelium and causes whooping cough. Its virulence factor adenylate cyclase toxin (CyaA) plays an important role in the course of infection. Previous studies on the impact of CyaA on human epithelial cells have been carried out using cell lines derived from the airways or the intestinal tract. Here, we investigated the interaction of CyaA and its enzymatically inactive but fully pore-forming toxoid CyaA-AC– with primary human airway epithelial cells (hAEC) derived from different anatomical sites (nose and tracheo-bronchial region) in two-dimensional culture conditions. To assess possible differences between the response of primary hAEC and respiratory cell lines directly, we included HBEC3-KT in our studies. In comparative analyses, we studied the impact of both the toxin and the toxoid on cell viability, intracellular cAMP concentration and IL-6 secretion. We found that the selected hAEC, which lack CD11b, were differentially susceptible to both CyaA and CyaA-AC–. HBEC3-KT appeared not to be suitable for subsequent analyses. Since the nasal epithelium first gets in contact with airborne pathogens, we further studied the effect of CyaA and its toxoid on the innate immunity of three-dimensional tissue models of the human nasal mucosa. The present study reveals first insights in toxin–cell interaction using primary hAEC.
Background
Fibrosis poses a substantial setback in regenerative medicine. Histopathologically, fibrosis is an excessive accumulation of collagen affected by myofibroblasts and this can occur in any tissue that is exposed to chronic injury or insult. Transforming growth factor (TGF)-β1, a crucial mediator of fibrosis, drives differentiation of fibroblasts into myofibroblasts. These cells exhibit α-smooth muscle actin (α-SMA) and synthesize high amounts of collagen I, the major extracellular matrix (ECM) component of fibrosis. While hormones stimulate cells in a pulsatile manner, little is known about cellular response kinetics upon growth factor impact. We therefore studied the effects of short TGF-β1 pulses in terms of the induction and maintenance of the myofibroblast phenotype.
Results
Twenty-four hours after a single 30 min TGF-β1 pulse, transcription of fibrogenic genes was upregulated, but subsided 7 days later. In parallel, collagen I secretion rate and α-SMA presence were elevated for 7 days. A second pulse 24 h later extended the duration of effects to 14 days. We could not establish epigenetic changes on fibrogenic target genes to explain the long-lasting effects. However, ECM deposited under singly pulsed TGF-β1 was able to induce myofibroblast features in previously untreated fibroblasts. Dependent on the age of the ECM (1 day versus 7 days’ formation time), this property was diminished. Vice versa, myofibroblasts were cultured on fibroblast ECM and cells observed to express reduced (in comparison with myofibroblasts) levels of collagen I.
Conclusions
We demonstrated that short TGF-β1 pulses can exert long-lasting effects on fibroblasts by changing their microenvironment, thus leaving an imprint and creating a reciprocal feed-back loop. Therefore, the ECM might act as mid-term memory for pathobiochemical events. We would expect this microenvironmental memory to be dependent on matrix turnover and, as such, to be erasable. Our findings contribute to the current understanding of fibroblast induction and maintenance, and have bearing on the development of antifibrotic drugs.
Bevor ein zellbasiertes GTMP erstmalig beim Menschen angewendet werden kann, müssen verschiedene notwendige nicht-klinische Studien durchgeführt werden. Wichtig ist hier u.a. die Untersuchung der Biodistribution im Tiermodel. Diese umfasst die Verteilung, das Engraftment, die Persistenz, die Eliminierung und gegebenenfalls die Expansion der humanen Zellen in verschiedenen Organen, meistens im Mausmodel. Deshalb wurde eine qPCR-basierte Analysenmethode entwickelt, mit der humane genomische DNA innerhalb von muriner genomischer DNA bestimmt werden kann, und entsprechend den regulatorischen Richtlinien der European Medicines Agency und des International Council for Harmonisation validiert. Anschließend wurde diese Methode innerhalb einer präklinischen worst-case Szenario Biodistributionsstudie angewendet. Das Ziel dieser Studie war die Untersuchung des Biodistributionsprofils von genetisch modifizierten Blood Outgrowth Endothelial Cells von Hämophilie A Patienten 24 Stunden und sieben Tage nach intravenöser Applikation einer Dosis von 2x106 Zellen. Die Isolation, genetische Modifikation und die Expansion der Zellen sollte entsprechend den Richtlinien der Guten Herstellungspraxis durchgeführt werden. Hierbei ist die Auswahl und Anwendung geeigneter und essentieller Rohstoffe wichtig. Gleichermaßen ist die Durchführung einer definierten Qualitätskontrollstrategie notwendig und die Patientenzellen sollten nur innerhalb von nicht-klinischen Studien eingesetzt werden, wenn alle Akzeptanzkriterien erfüllt wurden. Die Validierung der qPCR-Methode zeigte eine hohe Genauigkeit, Präzision und Linearität innerhalb des Konzentrationsintervalls von 1:1x103 bis 1:1x106 humanen zu murinen Genomen. Bei Anwendung dieser Methode für die Biodistributionsstudie konnten nach 24 Stunden humane Genome in vier der acht untersuchten Mausorgane bestimmt werden. Nach sieben Tagen konnten in keinem der acht Organe humane Genome nachgewiesen werden...
The investigation of the biodistribution profile of a cell-based medicinal product is a pivotal prerequisite to allow a factual benefit-risk assessment within the non-clinical to clinical translation in product development. Here, a qPCR-based method to determine the amount of human DNA in mouse DNA was validated according to the guidelines of the European Medicines Agency and the International Council for Harmonisation of Technical Requirements for Pharmaceuticals for Human Use. Furthermore, a preclinical worst-case scenario study was performed in which this method was applied to investigate the biodistribution of 2 x 10\(^6\) intravenously administered, genetically modified, blood outgrowth endothelial cells from hemophilia A patients after 24 h and 7 days. The validation of the qPCR method demonstrated high accuracy, precision, and linearity for the concentration interval of 1:1 x 10\(^3\) to 1:1 x 10\(^6\) human to mouse DNA. The application of this method in the biodistribution study resulted in the detection of human genomes in four out of the eight investigated organs after 24 h. After 7 days, no human DNA was detected in the eight organs analyzed. This biodistribution study provides mandatory data on the toxicokinetic safety profile of an actual candidate cell-based medicinal product. The extensive evaluation of the required validation parameters confirms the applicability of the qPCR method for non-clinical biodistribution studies.
Aufgrund der sich umkehrenden Alterspyramide in Deutschland leiden bereits jetzt immer mehr Menschen an Gelenkknorpelschäden. Doch nicht nur das Alter, sondern auch Unfälle und Sportverletzungen und Übergewicht können zu irreversiblen Knorpeldefekten führen. Obwohl es diverse Behandlungsmöglichkeiten gibt, können die bisherige Methoden nicht als dauerhafte Heilung betrachtet werden. Im Rahmen des internationalen Forschungsprojektes BIO-CHIP sollte eine vielsprechende Behandlungsmethode mit neuartigen Arzneimitteln untersucht werden.
Als Ausgangsmaterial des Arzneimittels, ein hergestelltes Knorpelimplantat, dienen patienteneigene Knorpelzellen aus der Nase. Diese werden isoliert, vermehrt und letztlich auf einer Matrix zu einem Knorpelimplantat kultiviert. Wesentliche Voraussetzung für die Implantatfreigabe stellt neben toxikologischen und biologischen Unbedenklichkeitstests die Beurteilung der Viabilität dar. Diese wurde bisher anhand von Histologieschnitten von der Pathologie durchgeführt.
Ziel der vorliegenden Arbeit war die Entwicklung und Validierung eines standardisierten und objektiven Viabilitätstests für die Chondrozyten innerhalb der Knorpelmatrix. Hierfür wurde die LDH als Marker für irreversibel geschädigte Zellen verwendet. Die LDH Konzentration konnte mit dem CyQuant LDH-Assay durch die Messung der Absorption gemessen werden. Es konnte nachgewiesen werden, dass LDH die erforderliche Stabilität und Nachweisbarkeit im Medium besitzt. Mithilfe der Lyse, analog zum Herstellungsprozess, gezüchteter Mini-Knorpelimplantate, konnten die maximal erreichbaren LDH Konzentrationen ermittelt werden. Mithilfe dieser Konzentrationen wurde eine Eichkurve generiert. Diese dient als Beurteilung der Viabilität zukünftig gemessener Absorptionen des Überstandmediums.
Das entwickelte Verfahren erfordert keine invasiven Eingriffe am Implantat und zeichnet sich durch eine einfache Durchführung aus, da nur der Überstand gemessen werden muss. Die durchgeführte Validierung der Methode bescheinigte eine hohe Robustheit, Linearität, Genauigkeit und Präzision.
Here, a postpolymerization modification method for an α-terminal functionalized poly-(N-methyl-glycine), also known as polysarcosine, is introduced. 4-(Methylthio)phenyl piperidine-4-carboxylate as an initiator for the ring-opening polymerization of N-methyl-glycine-N-carboxyanhydride followed by oxidation of the thioester group to yield an α-terminal reactive 4-(methylsulfonyl)phenyl piperidine-4-carboxylate polymer is utilized. This represents an activated carboxylic acid terminus, allowing straightforward modification with nucleophiles under mild reaction conditions and provides the possibility to introduce a wide variety of nucleophiles as exemplified using small molecules, fluorescent dyes, and model proteins. The new initiator yielded polymers with well-defined molar mass, low dispersity, and high end-group fidelity, as observed by gel permeation chromatography, nuclear magnetic resonance spectroscopy, and matrix-assisted laser desorption/ionization time-of-flight mass spectroscopy. The introduced method can be of great interest for bioconjugation, but requires optimization, especially for protein conjugation.
The exposure of humans to nano-and microplastic particles (NMPs) is an issue recognized as a potential health hazard by scientists, authorities, politics, non-governmental organizations and the general public. The concentration of NMPs in the environment is increasing concomitantly with global plastic production and the usage of plastic materials. NMPs are detectable in numerous aquatic organisms and also in human samples, therefore necessitating a risk assessment of NMPs for human health. So far, a comprehensive risk assessment of NMPs is hampered by limited availability of appropriate reference materials, analytical obstacles and a lack of definitions and standardized study designs. Most studies conducted so far used polystyrene (PS) spheres as a matter of availability, although this polymer type accounts for only about 7% of total plastic production. Differently sized particles, different concentration and incubation times, and various biological models have been used, yielding hardly comparable data sets. Crucial physico-chemical properties of NMPs such as surface (charge, polarity, chemical reactivity), supplemented additives and adsorbed chemicals have been widely excluded from studies, although in particular the surface of NMPs determines the interaction with cellular membranes. In this manuscript we give an overview about the critical parameters which should be considered when performing risk assessments of NMPs, including novel reference materials, taking into account surface modifications (e.g., reflecting weathering processes), and the possible role of NMPs as a substrate and/or carrier for (pathogenic) microbes. Moreover, we make suggestions for biological model systems to evaluate immediate toxicity, long-term effects and the potential of NMPs to cross biological barriers. We are convinced that standardized reference materials and experimental parameters along with technical innovations in (nano)-particle sampling and analytics are a prerequisite for the successful realization of conclusive human health risk assessments of NMPs.
Entwicklungsaspekte eines Medizinproduktes zur Prävention und Überwachung von Hydrierungszuständen
(2018)
Der demografische Wandel und das Populationswachstum stellen eine globale Herausforderung für die Gesundheitssysteme dar. Eine vielversprechende Lösungsstrategie liegt in der digitalen Überwachung, Prävention und Therapie akuter und chronischer Erkrankungen durch die Nutzung von innovativen Technologien aus dem Bereich der personalisierten Medizin.
Die Digitalisierung in der Überwachung von Vitalparametern mittels Sensorik besitzt großes Potential für die längere Gesunderhaltung der Patienten und somit die Entlastung der Gesundheitssyteme im Ganzen.
Da Wassermangel für eine Vielfalt von Krankheiten einen Katalysator darstellt, ist die Hydratation ein wichtiger aber bislang nur invasiv zugänglicher Vitalparameter. Zur Etablierung nicht invasiver Messungen des Wasserhaushaltes am Menschen wurde im Rahmen dieser Arbeit die Eignung der Mikrowellentechnologie untersucht.
Dehydratation resultiert in der Veränderung des Osmolythaushaltes und beeinflusst biochemische Prozesse, was zur Entstehung von Morbidität führen kann. Im Rahmen der Arbeit werden Teilbereiche der Entwicklung eines Medizinproduktes abgebildet. Zu diesem Zweck wird die Machbarkeit der mikrowellenbasierten Analyse des Wasserhaushaltes in einer technischen Machbarkeitsstudie untersucht, um im zweiten Prozessschritt einen technischen Demonstrator in vitro und in vivo am Probanden erproben zu können. Hochfrequente elektromagnetische Wellen interagieren mit Molekülen, speziell Wasser. Enthält eine Probe freie Wassermoleküle, kann dies im reflektierten Signal detektiert werden. Zur Überprüfung des Sensorsystems in vitro dienen humane 3D-Vollhautmodelle mit spezifischer Hydratation und Gewebedichte der Matrixkomponenten als standardisiertes Modell zur Untersuchung definierter Exsikkoseszenarien und des Einflusses verschiedener Modellkomplexitäten. Die Eignungsüberprüfung des Systems mit einem technischen Demonstrator des künftigen Medizinproduktes belegt die Anwendbarkeit des Messsystems zur Erfassung des relativen Wassergehaltes. Die Technologie zeichnet sich durch eine hohe Sensitivität bei der Destinktion von Proben mittels Frequenz- und Signalreflektionsdifferenzen aus. Neben den In-vitro-Testungen wird das entwickelte Sensorsystem aus regulatorischer Sicht zur klinischen Leistungsüberprüfung vorbereitet und im Rahmen eines bewilligten Ethikvotums in vivo erprobt. Die Ergebnisse belegen die Machbarkeit der nichtinvasiven Erfassung des Wasserhaushaltes durch mikrowellenbasierte Messungen. Die Technologie birgt das Potential, in ein körpernahes Sensorsystem integriert zu werden, welches als Medizinprodukt zur persönlichen Gesundheitsüberwachung zugelassen werden kann.
Feasibility Study on a Microwave-Based Sensor for Measuring Hydration Level Using Human Skin Models
(2016)
Tissue dehydration results in three major types of exsiccosis—hyper-, hypo-, or isonatraemia. All three types entail alterations of salt concentrations leading to impaired biochemical processes, and can finally cause severe morbidity. The aim of our study was to demonstrate the feasibility of a microwave-based sensor technology for the non-invasive measurement of the hydration status. Electromagnetic waves at high frequencies interact with molecules, especially water. Hence, if a sample contains free water molecules, this can be detected in a reflected microwave signal. To develop the sensor system, human three-dimensional skin equivalents were instituted as a standardized test platform mimicking reproducible exsiccosis scenarios. Therefore, skin equivalents with a specific hydration and density of matrix components were generated and microwave measurements were performed. Hydration-specific spectra allowed deriving the hydration state of the skin models. A further advantage of the skin equivalents was the characterization of the impact of distinct skin components on the measured signals to investigate mechanisms of signal generation. The results demonstrate the feasibility of a non-invasive microwave-based hydration sensor technology. The sensor bears potential to be integrated in a wearable medical device for personal health monitoring.
Over the last 20 years, there has been increasing focus on the development of novel stem cell based therapies for the treatment of disorders and diseases affecting the enteric nervous system (ENS) of the gastrointestinal tract (so-called enteric neuropathies). Here, the idea is that ENS progenitor/stem cells could be transplanted into the gut wall to replace the damaged or absent neurons and glia of the ENS. This White Paper sets out experts' views on the commonly used methods and approaches to identify, isolate, purify, expand and optimize ENS stem cells, transplant them into the bowel, and assess transplant success, including restoration of gut function. We also highlight obstacles that must be overcome in order to progress from successful preclinical studies in animal models to ENS stem cell therapies in the clinic.
Electrochemical impedance spectroscopy (EIS) is a valuable technique analyzing electrochemical behavior of biological systems such as electrical characterization of cells and biomolecules, drug screening, and biomaterials in biomedical field. In EIS, an alternating current (AC) power signal is applied to the biological system, and the impedance of the system is measured over a range of frequencies.
In vitro culture models of endothelial or epithelial barrier tissue can be achieved by culturing barrier tissue on scaffolds made with synthetic or biological materials that provide separate compartments (apical and basal sides), allowing for further studies on drug transport. EIS is a great candidate for non-invasive and real-time monitoring of the electrical properties that correlate with barrier integrity during the tissue modeling. Although commercially available transendothelial/transepithelial electrical resistance (TEER) measurement devices are widely used, their use is particularly common in static transwell culture. EIS is considered more suitable than TEER measurement devices in bioreactor cultures that involve dynamic fluid flow to obtain accurate and reliable measurements. Furthermore, while TEER measurement devices can only assess resistance at a single frequency, EIS measurements can capture both resistance and capacitance properties of cells, providing additional information about the cellular barrier's characteristics across various frequencies. Incorporating EIS into a bioreactor system requires the careful optimization of electrode integration within the bioreactor setup and measurement parameters to ensure accurate EIS measurements. Since bioreactors vary in size and design depending on the purpose of the study, most studies have reported using an electrode system specifically designed for a particular bioreactor. The aim of this work was to produce multi-applicable electrodes and established methods for automated non-invasive and real-time monitoring using the EIS technique in bioreactor cultures. Key to the electrode material, titanium nitride (TiN) coating was fabricated on different substrates (materials and shape) using physical vapor deposition (PVD) and housed in a polydimethylsiloxane (PDMS) structure to allow the electrodes to function as independent units. Various electrode designs were evaluated for double-layer capacitance and morphology using EIS and scanning electron microscopy (SEM), respectively. The TiN-coated tube electrode was identified as the optimal choice. Furthermore, EIS measurements were performed to examine the impact of influential parameters related to culture conditions on the TiN-coated electrode system. In order to demonstrate the versatility of the electrodes, these electrodes were then integrated into in different types of perfusion bioreactors for monitoring barrier cells. Blood-brain barrier (BBB) cells were cultured in the newly developed dynamic flow bioreactor, while human umblical vascular endothelial cells (HUVECs) and Caco-2 cells were cultured in the miniature hollow fiber bioreactor (HFBR). As a result, the TiN-coated tube electrode system enabled investigation of BBB barrier integrity in long-term bioreactor culture. While EIS measurement could not detect HUVECs electrical properties in miniature HFBR culture, there was the possibility of measuring the barrier integrity of Caco-2 cells, indicating potential usefulness for evaluating their barrier function. Following the bioreactor cultures, the application of the TiN-coated tube electrode was expanded to hemofiltration, based on the hypothesis that the EIS system may be used to monitor clotting or clogging phenomena in hemofiltration. The findings suggest that the EIS monitoring system can track changes in ion concentration of blood before and after hemofiltration in real-time, which may serve as an indicator of clogging of filter membranes. Overall, our research demonstrates the potential of TiN-coated tube electrodes for sensitive and versatile non-invasive monitoring in bioreactor cultures and medical devices.
The development of novel fibrous biomaterials and further processing of medical devices is still challenging. For instance, titanium(IV) oxide is a well-established biocompatible material, and the synthesis of TiO\(_x\) particles and coatings via the sol-gel process has frequently been published. However, synthesis protocols of sol-gel-derived TiO\(_x\) fibers are hardly known. In this publication, the authors present a synthesis and fabrication of purely sol-gel-derived TiO\(_x\) fiber fleeces starting from the liquid sol-gel precursor titanium ethylate (TEOT). Here, the α-hydroxy-carboxylic acid lactic acid (LA) was used as a chelating ligand to reduce the reactivity towards hydrolysis of TEOT enabling a spinnable sol. The resulting fibers were processed into a non-woven fleece, characterized with FTIR, \(^{13}\)C-MAS-NMR, XRD, and screened with regard to their stability in physiological solution. They revealed an unexpected dependency between the LA content and the dissolution behavior. Finally, in vitro cell culture experiments proved their potential suitability as an open-mesh structured scaffold material, even for challenging applications such as therapeutic medicinal products (ATMPs).
In this report we describe a human pluripotent stem cell-derived vascular progenitor (MesoT) cell of the mesothelium lineage. MesoT cells are multipotent and generate smooth muscle cells, endothelial cells, and pericytes and self-assemble into vessel-like networks in vitro. MesoT cells transplanted into mechanically damaged neonatal mouse heart migrate into the injured tissue and contribute to nascent coronary vessels in the repair zone. When seeded onto decellularized vascular scaffolds, MesoT cells differentiate into the major vascular lineages and self-assemble into vasculature capable of supporting peripheral blood flow following transplantation. These findings demonstrate in vivo functionality and the potential utility of MesoT cells in vascular engineering applications.
Growth and Differentiation Factor 5 (GDF5) is a secreted growth factor that belongs to the Bone Morphogenetic Protein (BMP) family and plays a pivotal role during limb development. GDF5 is a susceptibility gene for osteoarthritis (OA) and mutations in GDF5 are associated with a wide variety of skeletal malformations ranging from complex syndromes such as acromesomelic chondrodysplasias to isolated forms of brachydactylies or multiple synostoses syndrome 2 (SYNS2). Here, we report on a family with an autosomal dominant inherited combination of SYNS2 and additional brachydactyly type A1 (BDA1) caused by a single point mutation in GDF5 (p.W414R). Functional studies, including chondrogenesis assays with primary mesenchymal cells, luciferase reporter gene assays and Surface Plasmon Resonance analysis, of the GDF5 W-414R variant in comparison to other GDF5 mutations associated with isolated BDA1 (p.R399C) or SYNS2 (p.E491K) revealed a dual pathomechanism characterized by a gain-and loss-of-function at the same time. On the one hand insensitivity to the main GDF5 antagonist NOGGIN (NOG) leads to a GDF5 gain of function and subsequent SYNS2 phenotype. Whereas on the other hand, a reduced signaling activity, specifically via the BMP receptor type IA (BMPR1A), is likely responsible for the BDA1 phenotype. These results demonstrate that one mutation in the overlapping interface of antagonist and receptor binding site in GDF5 can lead to a GDF5 variant with pathophysiological relevance for both, BDA1 and SYNS2 development. Consequently, our study assembles another part of the molecular puzzle of how loss and gain of function mutations in GDF5 affect bone development in hands and feet resulting in specific types of brachydactyly and SYNS2. These novel insights into the biology of GDF5 might also provide further clues on the pathophysiology of OA.
Transmission of measles virus (MV) from dendritic to airway epithelial cells is considered as crucial to viral spread late in infection. Therefore, pathways and effectors governing this process are promising targets for intervention. To identify these, we established a 3D respiratory tract model where MV transmission by infected dendritic cells (DCs) relied on the presence of nectin-4 on H358 lung epithelial cells. Access to recipient cells is an important prerequisite for transmission, and we therefore analyzed migration of MV-exposed DC cultures within the model. Surprisingly, enhanced motility toward the epithelial layer was observed for MV-infected DCs as compared to their uninfected siblings. This occurred independently of factors released from H358 cells indicating that MV infection triggered cytoskeletal remodeling associated with DC polarization enforced velocity. Accordingly, the latter was also observed for MV-infected DCs in collagen matrices and was particularly sensitive to ROCK inhibition indicating infected DCs preferentially employed the amoeboid migration mode. This was also implicated by loss of podosomes and reduced filopodial activity both of which were retained in MV-exposed uninfected DCs. Evidently, sphingosine kinase (SphK) and sphingosine-1-phosphate (S1P) as produced in response to virus-infection in DCs contributed to enhanced velocity because this was abrogated upon inhibition of sphingosine kinase activity. These findings indicate that MV infection promotes a push-and-squeeze fast amoeboid migration mode via the SphK/S1P system characterized by loss of filopodia and podosome dissolution. Consequently, this enables rapid trafficking of virus toward epithelial cells during viral exit.
The zona pellucida (ZP) domain is present in extracellular proteins such as the zona pellucida proteins and tectorins and participates in the formation of polymeric protein networks. However, the ZP domain also occurs in the cytokine signaling co-receptor transforming growth factor beta (TGF-\(\beta\)) receptor type 3 (TGFR-3, also known as betaglycan) where it contributes to cytokine ligand recognition. Currently it is unclear how the ZP domain architecture enables this dual functionality. Here, we identify a novel major TGF-beta-binding site in the FG loop of the C-terminal subdomain of the murine TGFR-3 ZP domain (ZP-C) using protein crystallography, limited proteolysis experiments, surface plasmon resonance measurements and synthetic peptides. In the murine 2.7 angstrom crystal structure that we are presenting here, the FG-loop is disordered, however, well-ordered in a recently reported homologous rat ZP-C structure. Surprisingly, the adjacent external hydrophobic patch (EHP) segment is registered differently in the rat and murine structures suggesting that this segment only loosely associates with the remaining ZP-C fold. Such a flexible and temporarily-modulated association of the EHP segment with the ZP domain has been proposed to control the polymerization of ZP domain-containing proteins. Our findings suggest that this flexibility also extends to the ZP domain of TGFR-3 and might facilitate co-receptor ligand interaction and presentation via the adjacent FG-loop. This hints that a similar C-terminal region of the ZP domain architecture possibly regulates both the polymerization of extracellular matrix proteins and cytokine ligand recognition of TGFR-3.
Infection research largely relies on classical cell culture or mouse models. Despite having delivered invaluable insights into host-pathogen interactions, both have limitations in translating mechanistic principles to human pathologies. Alternatives can be derived from modern Tissue Engineering approaches, allowing the reconstruction of functional tissue models in vitro. Here, we combined a biological extracellular matrix with primary tissue-derived enteroids to establish an in vitro model of the human small intestinal epithelium exhibiting in vivo-like characteristics. Using the foodborne pathogen Salmonella enterica serovar Typhimurium, we demonstrated the applicability of our model to enteric infection research in the human context. Infection assays coupled to spatio-temporal readouts recapitulated the established key steps of epithelial infection by this pathogen in our model. Besides, we detected the upregulation of olfactomedin 4 in infected cells, a hitherto unrecognized aspect of the host response to Salmonella infection. Together, this primary human small intestinal tissue model fills the gap between simplistic cell culture and animal models of infection, and shall prove valuable in uncovering human-specific features of host-pathogen interplay.
A fine balance of regulatory (T\(_{reg}\)) and conventional CD4\(^+\) T cells (T\(_{conv}\)) is required to prevent harmful immune responses, while at the same time ensuring the development of protective immunity against pathogens. As for many cellular processes, sphingolipid metabolism also crucially modulates the T\(_{reg}\)/T\(_{conv}\) balance. However, our understanding of how sphingolipid metabolism is involved in T cell biology is still evolving and a better characterization of the tools at hand is required to advance the field. Therefore, we established a reductionist liposomal membrane model system to imitate the plasma membrane of mouse T\(_{reg}\) and T\(_{conv}\) with regards to their ceramide content. We found that the capacity of membranes to incorporate externally added azide-functionalized ceramide positively correlated with the ceramide content of the liposomes. Moreover, we studied the impact of the different liposomal preparations on primary mouse splenocytes in vitro. The addition of liposomes to resting, but not activated, splenocytes maintained viability with liposomes containing high amounts of C\(_{16}\)-ceramide being most efficient. Our data thus suggest that differences in ceramide post-incorporation into T\(_{reg}\) and T\(_{conv}\) reflect differences in the ceramide content of cellular membranes.
Follistatin Effects in Migration, Vascularization, and Osteogenesis in vitro and Bone Repair in vivo
(2019)
The use of biomaterials and signaling molecules to induce bone formation is a promising approach in the field of bone tissue engineering. Follistatin (FST) is a glycoprotein able to bind irreversibly to activin A, a protein that has been reported to inhibit bone formation. We investigated the effect of FST in critical processes for bone repair, such as cell recruitment, osteogenesis and vascularization, and ultimately its use for bone tissue engineering. In vitro, FST promoted mesenchymal stem cell (MSC) and endothelial cell (EC) migration as well as essential steps in the formation and expansion of the vasculature such as EC tube-formation and sprouting. FST did not enhance osteogenic differentiation of MSCs, but increased committed osteoblast mineralization. In vivo, FST was loaded in an in situ gelling formulation made by alginate and recombinant collagen-based peptide microspheres and implanted in a rat calvarial defect model. Two FST variants (FST288 and FST315) with major differences in their affinity to cell-surface proteoglycans, which may influence their effect upon in vivo bone repair, were tested. In vitro, most of the loaded FST315 was released over 4 weeks, contrary to FST288, which was mostly retained in the biomaterial. However, none of the FST variants improved in vivo bone healing compared to control. These results demonstrate that FST enhances crucial processes needed for bone repair. Further studies need to investigate the optimal FST carrier for bone regeneration.
Development of predictable in vitro tumor models is a challenging task due to the enormous complexity of tumors in vivo. The closer the resemblance of these models to human tumor characteristics, the more suitable they are for drug-development and –testing. In the present study, we generated a complex 3D lung tumor test system based on acellular rat lungs. A decellularization protocol was established preserving the architecture, important ECM components and the basement membrane of the lung. Human lung tumor cells cultured on the scaffold formed cluster and exhibited an up-regulation of the carcinoma-associated marker mucin1 as well as a reduced proliferation rate compared to respective 2D culture. Additionally, employing functional imaging with 2-deoxy-2-[\(^{18}\)F]fluoro-D-glucose positron emission tomography (FDG-PET) these tumor cell cluster could be detected and tracked over time. This approach allowed monitoring of a targeted tyrosine kinase inhibitor treatment in the in vitro lung tumor model non-destructively. Surprisingly, FDG-PET assessment of single tumor cell cluster on the same scaffold exhibited differences in their response to therapy, indicating heterogeneity in the lung tumor model. In conclusion, our complex lung tumor test system features important characteristics of tumors and its microenvironment and allows monitoring of tumor growth and -metabolism in combination with functional imaging. In longitudinal studies, new therapeutic approaches and their long-term effects can be evaluated to adapt treatment regimes in future.
Efficient redirection of NK cells by genetic modification with chemokine receptors CCR4 and CCR2B
(2023)
Natural killer (NK) cells are a subset of lymphocytes that offer great potential for cancer immunotherapy due to their natural anti-tumor activity and the possibility to safely transplant cells from healthy donors to patients in a clinical setting. However, the efficacy of cell-based immunotherapies using both T and NK cells is often limited by a poor infiltration of immune cells into solid tumors. Importantly, regulatory immune cell subsets are frequently recruited to tumor sites. In this study, we overexpressed two chemokine receptors, CCR4 and CCR2B, that are naturally found on T regulatory cells and tumor-resident monocytes, respectively, on NK cells. Using the NK cell line NK-92 as well as primary NK cells from peripheral blood, we show that genetically engineered NK cells can be efficiently redirected using chemokine receptors from different immune cell lineages and migrate towards chemokines such as CCL22 or CCL2, without impairing the natural effector functions. This approach has the potential to enhance the therapeutic effect of immunotherapies in solid tumors by directing genetically engineered donor NK cells to tumor sites. As a future therapeutic option, the natural anti-tumor activity of NK cells at the tumor sites can be increased by co-expression of chemokine receptors with chimeric antigen receptors (CAR) or T cell receptors (TCR) on NK cells can be performed in the future.
Age-related macular degeneration (AMD) is the leading cause of blindness in the Western world. With an ageing population, it is anticipated that the number of AMD cases will increase dramatically, making a solution to this debilitating disease an urgent requirement for the socioeconomic future of the European Union and worldwide. The present paper reviews the limitations of the current therapies as well as the socioeconomic impact of the AMD. There is currently no cure available for AMD, and even palliative treatments are rare. Treatment options show several side effects, are of high cost, and only treat the consequence, not the cause of the pathology. For that reason, many options involving cell therapy mainly based on retinal and iris pigment epithelium cells as well as stem cells are being tested. Moreover, tissue engineering strategies to design and manufacture scaffolds to mimic Bruch's membrane are very diverse and under investigation. Both alternative therapies are aimed to prevent and/or cure AMD and are reviewed herein.
The small intestine represents a strong barrier separating the lumen from blood circulation thereby playing a major role in the absorption and the transport of pharmacological agents prior to their arrival on the respective target site. In order to gain more knowledge about specialized uptake mechanisms and risk assessment for the patient after oral admission of drugs, intestinal in vitro models demonstrating a close similarity to the in vivo situation are needed.
In the past, cell line-based in vitro models composed of Caco-2 cells cultured on synthetic cell carriers represented the “gold standard” in the field of intestinal tissue engineering. Expressive advantages of these models are a reproducible, cost-efficient and standardized model set up, but cell function can be negatively influenced by the low porosity or unwanted molecular adhesion effects of the artificial scaffold material. Natural extracellular matrices (ECM) such as the porcine decellularized small intestinal submucosa (SIS) are used as alternative to overcome some common drawbacks; however, the fabrication of these scaffolds is time- and cost-intensive, less well standardized and the 3Rs (replacement, reduction, refinement) principle is not entirely fulfilled. Nowadays, biopolymer-based scaffolds such as the bacterial nanocellulose (BNC) suggest an interesting option of novel intestinal tissue engineered models, as the BNC shows comparable features to the native ECM regarding fiber arrangement and hydrophilic properties. Furthermore, the BNC is of non-animal origin and the manufacturing process is faster as well as well standardized at low costs.
In this context, the first part of this thesis analyzed the BNC as alternative scaffold to derive standardized and functional organ models in vitro. Therefore, Caco-2 cells were cultured on two versions of BNC with respect to their surface topography, the unmodified BNC as rather smooth surface and the surface-structured BNC presenting an aligned fiber arrangement. As controls, Caco-2 in vitro models were set up on PET and SIS matrices. In this study, the BNC-based models demonstrated organ-specific properties comprising typical cellular morphologies, a characteristic tight junction protein expression profile, representative ultrastructural features and the formation of a tight epithelial barrier together with a corresponding transport activity. In summary, these results validated the high quality of the BNC-based Caco-2 models under cost-efficient conditions and their suitability for pre-clinical research purposes. However, the full functional diversity of the human intestine cannot be presented by Caco-2 cells due to their tumorigenic background and their exclusive representation of mature enterocytes.
Next to the scaffold used for the setup of in vitro models, the cellular unit mainly drives functional performance, which demonstrates the crucial importance of mimicking the cellular diversity of the small intestine in vitro. In this context, intestinal primary organoids are of high interest, as they show a close similarity to the native epithelium regarding their cellular diversity comprising enterocytes, goblet cells, enteroendocrine cells, paneth cells, transit amplifying cells and stem cells. In general, such primary organoids grow in a 3D Matrigel® based environment and a medium formulation supplemented with a variety of growth factors to maintain stemness, to inhibit differentiation and to stimulate cell migration supporting long term in vitro culture.
Intestinal primary spheroid/organoid cultures were set up as Transwell®-like models on both BNC variants, which resulted in a fragmentary cell layer and thereby unfavorable properties of these scaffold materials under the applied circumstances. As the BNC manufacturing process is highly flexible, surface properties could be adapted in future studies to enable a good cell adherence and barrier formation for primary intestinal cells, too. However, the application of these organoid cultures in pre-clinical research represents an enormous challenge, as the in vitro culture is complex and additionally time- and cost-intensive.
With regard to the high potential of primary intestinal spheroids/organoids and the necessity of a simplified but predictive model in pre-clinical research purposes, the second part of this thesis addressed the establishment of a primary-derived immortalized intestinal cell line, which enables a standardized and cost-efficient culture (including in 2D), while maintaining the cellular diversity of the organoid in vitro cultures. In this study, immortalization of murine and human intestinal primary organoids was induced by ectopic expression of a 10- (murine) or 12 component (human) pool of genes regulating stemness and the cell cycle, which was performed in cooperation with the InSCREENeX GmbH in a 2D- and 3D-based transduction strategy. In first line, the established cell lines (cell clones) were investigated for their cell culture prerequisites to grow under simplified and cost-efficient conditions. While murine cell clones grew on uncoated plastic in a medium formulation supplemented with EGF, Noggin, Y-27632 and 10% FCS, the human cell clones demonstrated the necessity of a Col I pre coating together with the need for a medium composition commonly used for primary human spheroid/organoid cultures. Furthermore, the preceding analyses resulted in only one human cell clone and three murine cell clones for ongoing characterization. Studies regarding the proliferative properties and the specific gene as well as protein expression profile of the remaining cell clones have shown, that it is likely that transient amplifying cells (TACs) were immortalized instead of the differentiated cell types localized in primary organoids, as 2D, 3D or Transwell®-based cultures resulted in slightly different gene expression profiles and in a dramatically reduced mRNA transcript level for the analyzed marker genes representative for the differentiated cell types of the native epithelium. Further, 3D cultures demonstrated the formation of spheroid-like structures; however without forming organoid-like structures due to prolonged culture, indicating that these cell populations have lost their ability to differentiate into specific intestinal cell types. The Transwell®-based models set up of each clone exhibit organ-specific properties comprising an epithelial-like morphology, a characteristic protein expression profile with an apical mucus-layer covering the villin-1 positive cell layer, thereby representing goblet cells and enterocytes, together with representative tight junction complexes indicating an integer epithelial barrier. The proof of a functional as well as tight epithelial barrier in TEER measurements and in vivo-like transport activities qualified the established cell clones as alternative cell sources for tissue engineered models representing the small intestine to some extent. Additionally, the easy handling and cell expansion under more cost-efficient conditions compared to primary organoid cultures favors the use of these newly generated cell clones in bioavailability studies.
Altogether, this work demonstrated new components, structural and cellular, for the establishment of alternative in vitro models of the small intestinal epithelium, which could be used in pre-clinical screenings for reproducible drug delivery studies.
Für die Verwendung von zellbasierten Therapeutika ist vor allem die korrekt Identifikation
sowohl vom Ausgangsmaterial wie auch dem produziertem Material von
zentraler Wichtigkeit. In dieser Arbeit wurde eine Methodik entwickelt, welche eine
nicht-invasive Klassifizierung von Zellen und zellulärer Entwicklung aufgrund ihrer
zweidimensionalen Magnetresonanz-Korrelationsspektren ermöglichte.
Hierzu wurde ein mobiler MR-Scanner mit einer Feldstärke von 0.5T und einem Isozentrum
von 1 cm3 verwendet. Aufgrund der kompakten und leichten Bauweise war
es möglich, das System in normalen Zellkulturlaboren zu verwenden. Von den Proben
wurde ein zweidimensionales T1/T2 -Korrelationsspektrum aufgenommen, anhand
dessen die Zellen klassifiziert werden sollten. Mithilfe von Agarose-Dotagraf® -Zell-
Phantomen konnte die Stabilität und Reproduzierbarkeit des Messsystems und der
verwendeten Sequenz validiert werden.
Aufgrund der unter Umständen recht langen Messzeiten der MR-Technologie war
auch die Handhabung und Kultur der Zellproben während des Messprozesses von
großer Bedeutung. Um hierfür den Durchsatz an Proben zu erhöhen, wurde eine kostengünstige
und ebenfalls mobile Robotikanlage entwickelt. Diese basierte auf dem
kommerziell erhältlichen Roboterarm Braccio, welcher durch einen Arduino Mega
Mikrocontroller gesteuert wurde. Mit bis zu 24 Proben pro Tag konnte durch die
Automatisierung der Durchsatz an Proben um den Faktor 3 – 4 gesteigert werden.
Durch den entwickelten Prozess war es möglich, eine umfangreiche Datenbank –
bestehend aus 362 unabhängigen Messungen (biologische Replikate) – aufzubauen.
Die Datenbank enthielt Messungen von zehn unterschiedlichen Zelllinien. Zusätzlich
wurden T1/T2 -Korrelationsspektren von mesenchymalen Stromazellen (MSCs)
vor und nach deren Differenzierung zu Adipocyten aufgenommen, um ihre zelluläre
Entwicklung nicht-invasiv charakterisieren zu können.
Die aufgenommenen Daten wurden mithilfe einer geeigneten Support Vector Machine
wie auch angepassten künstlichen neuronalen Netzwerken klassifiziert. Mithilfe
dieser Methoden konnten die Zelllinien und MSCs anhand ihrer aufgenommenen
Korrelationsspektren mit einer Genauigkeit von bis zu 98% klassifiziert werden.
Diese hohe Treffsicherheit legte den Schluss nahe, dass die Kombination aus nichtinvasiver,
zweidimensionaler T1/T2 -MR-Relaxometrie und der Verwendung von geeigneten
Methoden des machine learning und der künstlichen Intelligenz eine effiziente
Methodik für die nicht-invasive Klassifizierung von Zellen sowie zellulärer
Entwicklung darstellt.
Acetylsalicylic acid and salicylic acid inhibit SARS-CoV-2 replication in precision-cut lung slices
(2022)
Aspirin, with its active compound acetylsalicylic acid (ASA), shows antiviral activity against rhino- and influenza viruses at high concentrations. We sought to investigate whether ASA and its metabolite salicylic acid (SA) inhibit SARS-CoV-2 since it might use similar pathways to influenza viruses. The compound-treated cells were infected with SARS-CoV-2. Viral replication was analysed by RTqPCR. The compounds suppressed SARS-CoV-2 replication in cell culture cells and a patient-near replication system using human precision-cut lung slices by two orders of magnitude. While the compounds did not interfere with viral entry, it led to lower viral RNA expression after 24 h, indicating that post-entry pathways were inhibited by the compounds.
3D printing is a rapidly evolving field for biological (bioprinting) and non-biological applications. Due to a high degree of freedom for geometrical parameters in 3D printing, prototype printing of bioreactors is a promising approach in the field of Tissue Engineering. The variety of printers, materials, printing parameters and device settings is difficult to overview both for beginners as well as for most professionals. In order to address this problem, we designed a guidance including test bodies to elucidate the real printing performance for a given printer system. Therefore, performance parameters such as accuracy or mechanical stability of the test bodies are systematically analysed. Moreover, post processing steps such as sterilisation or cleaning are considered in the test procedure. The guidance presented here is also applicable to optimise the printer settings for a given printer device. As proof of concept, we compared fused filament fabrication, stereolithography and selective laser sintering as the three most used printing methods. We determined fused filament fabrication printing as the most economical solution, while stereolithography is most accurate and features the highest surface quality. Finally, we tested the applicability of our guidance by identifying a printer solution to manufacture a complex bioreactor for a perfused tissue construct. Due to its design, the manufacture via subtractive mechanical methods would be 21-fold more expensive than additive manufacturing and therefore, would result in three times the number of parts to be assembled subsequently. Using this bioreactor we showed a successful 14-day-culture of a biofabricated collagen-based tissue construct containing human dermal fibroblasts as the stromal part and a perfusable central channel with human microvascular endothelial cells. Our study indicates how the full potential of biofabrication can be exploited, as most printed tissues exhibit individual shapes and require storage under physiological conditions, after the bioprinting process.
Meningococcal meningitis is a severe central nervous system infection that occurs when Neisseria meningitidis (Nm) penetrates brain endothelial cells (BECs) of the meningeal blood-cerebrospinal fluid barrier. As a human-specific pathogen, in vivo models are greatly limited and pose a significant challenge. In vitro cell models have been developed, however, most lack critical BEC phenotypes limiting their usefulness. Human BECs generated from induced pluripotent stem cells (iPSCs) retain BEC properties and offer the prospect of modeling the human-specific Nm interaction with BECs. Here, we exploit iPSC-BECs as a novel cellular model to study Nm host-pathogen interactions, and provide an overview of host responses to Nm infection. Using iPSC-BECs, we first confirmed that multiple Nm strains and mutants follow similar phenotypes to previously described models. The recruitment of the recently published pilus adhesin receptor CD147 underneath meningococcal microcolonies could be verified in iPSC-BECs. Nm was also observed to significantly increase the expression of pro-inflammatory and neutrophil-specific chemokines IL6, CXCL1, CXCL2, CXCL8, and CCL20, and the secretion of IFN-γ and RANTES. For the first time, we directly observe that Nm disrupts the three tight junction proteins ZO-1, Occludin, and Claudin-5, which become frayed and/or discontinuous in BECs upon Nm challenge. In accordance with tight junction loss, a sharp loss in trans-endothelial electrical resistance, and an increase in sodium fluorescein permeability and in bacterial transmigration, was observed. Finally, we established RNA-Seq of sorted, infected iPSC-BECs, providing expression data of Nm-responsive host genes. Altogether, this model provides novel insights into Nm pathogenesis, including an impact of Nm on barrier properties and tight junction complexes, and suggests that the paracellular route may contribute to Nm traversal of BECs.
Models of the outer epithelia of the human body namely the skin, the intestine and the lung have found valid applications in both research and industrial settings as attractive alternatives to animal testing. A variety of approaches to model these barriers are currently employed in such fields, ranging from the utilization of ex vivo tissue to reconstructed in vitro models, and further to chip-based technologies, synthetic membrane systems and, of increasing current interest, in silico modeling approaches. An international group of experts in the field of epithelial barriers was convened from academia, industry and regulatory bodies to present both the current state of the art of non-animal models of the skin, intestinal and pulmonary barriers in their various fields of application, and to discuss research-based, industry-driven and regulatory-relevant future directions for both the development of new models and the refinement of existing test methods. Issues of model relevance and preference, validation and standardization, acceptance, and the need for simplicity versus complexity were focal themes of the discussions. The outcomes of workshop presentations and discussions, in relation to both current status and future directions in the utilization and development of epithelial barrier models, are presented by the attending experts in the current report.
Tissue-engineered skin equivalents mimic key aspects of the human skin, and can thus be employed as wound coverage for large skin defects or as in vitro test systems as an alternative to animal models. However, current skin equivalents lack a functional vasculature limiting clinical and research applications. This study demonstrates the generation of a vascularized skin equivalent with a perfused vascular network by combining a biological vascularized scaffold (BioVaSc) based on a decellularized segment of a porcine jejunum and a tailored bioreactor system. Briefly, the BioVaSc was seeded with human fibroblasts, keratinocytes, and human microvascular endothelial cells. After 14 days at the air-liquid interface, hematoxylin & eosin and immunohistological staining revealed a specific histological architecture representative of the human dermis and epidermis including a papillary-like architecture at the dermal-epidermal-junction. The formation of the skin barrier was measured non-destructively using impedance spectroscopy. Additionally, endothelial cells lined the walls of the formed vessels that could be perfused with a physiological volume flow. Due to the presence of a complex in-vivo-like vasculature, the here shown skin equivalent has the potential for skin grafting and represents a sophisticated in vitro model for dermatological research.
To replace the Draize skin irritation assay (OECD guideline 404) several test methods based on reconstructed human epidermis (RHE) have been developed and were adopted in the OECD test guideline 439. However, all validated test methods in the guideline are linked to RHE provided by only three companies. Thus,the availability of these test models is dependent on the commercial interest of the producer. To overcome this limitation and thus to increase the accessibility of in vitro skin irritation testing, an open source reconstructed epidermis (OS-REp) was introduced. To demonstrate the capacity of the OS-REp in regulatory risk assessment, a catch-up-validation study was performed. The participating laboratories used in-house generated OS-REp to assess the set of 20 reference substances according to the performance standards amending the OECD test guideline 439. Testing was performed under blinded conditions. The within-laboratory reproducibility of 87% and the inter-laboratory reproducibility of 85% prove a high reliability of irritancy testing using the OS-REp protocol. In addition, the prediction capacity was with an accuracy of 80% comparable to previous published RHE based test protocols. Taken together the results indicate that the OS-REp test method can be used as a standalone alternative skin irritation test replacing the OECD test guideline 404.
Patient-tailored therapy based on tumor drivers is promising for lung cancer treatment. For this, we combined in vitro tissue models with in silico analyses. Using individual cell lines with specific mutations, we demonstrate a generic and rapid stratification pipeline for targeted tumor therapy. We improve in vitro models of tissue conditions by a biological matrix-based three-dimensional (3D) tissue culture that allows in vitro drug testing: It correctly shows a strong drug response upon gefitinib (Gef) treatment in a cell line harboring an EGFR-activating mutation (HCC827), but no clear drug response upon treatment with the HSP90 inhibitor 17AAG in two cell lines with KRAS mutations (H441, A549). In contrast, 2D testing implies wrongly KRAS as a biomarker for HSP90 inhibitor treatment, although this fails in clinical studies. Signaling analysis by phospho-arrays showed similar effects of EGFR inhibition by Gef in HCC827 cells, under both 2D and 3D conditions. Western blot analysis confirmed that for 3D conditions, HSP90 inhibitor treatment implies different p53 regulation and decreased MET inhibition in HCC827 and H441 cells. Using in vitro data (western, phospho-kinase array, proliferation, and apoptosis), we generated cell line-specific in silico topologies and condition-specific (2D, 3D) simulations of signaling correctly mirroring in vitro treatment responses. Networks predict drug targets considering key interactions and individual cell line mutations using the Human Protein Reference Database and the COSMIC database. A signature of potential biomarkers and matching drugs improve stratification and treatment in KRAS-mutated tumors. In silico screening and dynamic simulation of drug actions resulted in individual therapeutic suggestions, that is, targeting HIF1A in H441 and LKB1 in A549 cells. In conclusion, our in vitro tumor tissue model combined with an in silico tool improves drug effect prediction and patient stratification. Our tool is used in our comprehensive cancer center and is made now publicly available for targeted therapy decisions.
Advanced Therapy Medicinal Products (ATMP) provide promising treatment options particularly for unmet clinical needs, such as progressive and chronic diseases where currently no satisfying treatment exists. Especially from the ATMP subclass of Tissue Engineered Products (TEPs), only a few have yet been translated from an academic setting to clinic and beyond. A reason for low numbers of TEPs in current clinical trials and one main key hurdle for TEPs is the cost and labor-intensive manufacturing process. Manual production steps require experienced personnel, are challenging to standardize and to scale up. Automated manufacturing has the potential to overcome these challenges, toward an increasing cost-effectiveness. One major obstacle for automation is the control and risk prevention of cross contaminations, especially when handling parallel production lines of different patient material. These critical steps necessitate validated effective and efficient cleaning procedures in an automated system. In this perspective, possible technologies, concepts and solutions to existing ATMP manufacturing hurdles are discussed on the example of a late clinical phase II trial TEP. In compliance to Good Manufacturing Practice (GMP) guidelines, we propose a dual arm robot based isolator approach. Our novel concept enables complete process automation for adherent cell culture, and the translation of all manual process steps with standard laboratory equipment. Moreover, we discuss novel solutions for automated cleaning, without the need for human intervention. Consequently, our automation concept offers the unique chance to scale up production while becoming more cost-effective, which will ultimately increase TEP availability to a broader number of patients.
Ovarian cancer is the second most common gynecological malignancy in women. More than 70% of the cases are diagnosed at the advanced stage, presenting as primary peritoneal metastasis, which results in a poor 5-year survival rate of around 40%. Mechanisms of peritoneal metastasis, including adhesion, migration, and invasion, are still not completely understood and therapeutic options are extremely limited. Therefore, there is a strong requirement for a 3D model mimicking the in vivo situation. In this study, we describe the establishment of a 3D tissue model of the human peritoneum based on decellularized porcine small intestinal submucosa (SIS) scaffold. The SIS scaffold was populated with human dermal fibroblasts, with LP-9 cells on the apical side representing the peritoneal mesothelium, while HUVEC cells on the basal side of the scaffold served to mimic the endothelial cell layer. Functional analyses of the transepithelial electrical resistance (TEER) and the FITC-dextran assay indicated the high barrier integrity of our model. The histological, immunohistochemical, and ultrastructural analyses showed the main characteristics of the site of adhesion. Initial experiments using the SKOV-3 cell line as representative for ovarian carcinoma demonstrated the usefulness of our models for studying tumor cell adhesion, as well as the effect of tumor cells on endothelial cell-to-cell contacts. Taken together, our data show that the novel peritoneal 3D tissue model is a promising tool for studying the peritoneal dissemination of ovarian cancer.
Age-related gene expression analysis in enteric ganglia of human colon after laser microdissection
(2014)
The enteric nervous system (ENS) poses the intrinsic innervation of the gastrointestinal tract and plays a critical role for all stages of postnatal life. There is increasing scientific and clinical interest in acquired or age-related gastrointestinal dysfunctions that can be manifested in diseases such as gut constipation or fecal incontinence. In this study, we sought to analyze age-dependent changes in the gene expression profile of the human ENS, particularly in the myenteric plexus. Therefore, we used the laser microdissection technique which has been proven as a feasible tool to analyze distinct cell populations within heterogeneously composed tissues. Full biopsy gut samples were prepared from children (4–12 months), middle aged (48–58 years) and aged donors (70–95 years). Cryosections were histologically stained with H&E, the ganglia of the myenteric plexus identified and RNA isolated using laser microdissection technique. Quantitative PCR was performed for selected neural genes, neurotransmitters and receptors. Data were confirmed on protein level using NADPH-diaphorase staining and immunohistochemistry. As result, we demonstrate age-associated alterations in site-specific gene expression pattern of the ENS. Thus, in the adult and aged distal parts of the colon a marked decrease in relative gene expression of neural key genes like NGFR, RET, NOS1 and a concurrent increase of CHAT were observed. Further, we detected notable regional differences of RET, CHAT, TH, and S100B comparing gene expression in aged proximal and distal colon. Interestingly, markers indicating cellular senescence or oxidative stress (SNCA, CASP3, CAT, SOD2, and TERT) were largely unchanged within the ENS. For the first time, our study also describes the age-dependent expression pattern of all major sodium channels within the ENS. Our results are in line with previous studies showing spatio-temporal differences within the mammalian ENS.
Recent advances in the in vitro characterization of human adult enteric neural progenitor cells have opened new possibilities for cell-based therapies in gastrointestinal motility disorders. However, whether these cells are able to integrate within an in vivo gut environment is still unclear. In this study, we transplanted neural progenitor-containing neurosphere-like bodies (NLBs) in a mouse model of hypoganglionosis and analyzed cellular integration of NLB-derived cell types and functional improvement. NLBs were propagated from postnatal and adult human gut tissues. Cells were characterized by immunohistochemistry, quantitative PCR and subtelomere fluorescence in situ hybridization (FISH). For in vivo evaluation, the plexus of murine colon was damaged by the application of cationic surfactant benzalkonium chloride which was followed by the transplantation of NLBs in a fibrin matrix. After 4 weeks, grafted human cells were visualized by combined in situ hybridization (Alu) and immunohistochemistry (PGP9.5, GFAP, SMA). In addition, we determined nitric oxide synthase (NOS)-positive neurons and measured hypertrophic effects in the ENS and musculature. Contractility of treated guts was assessed in organ bath after electrical field stimulation. NLBs could be reproducibly generated without any signs of chromosomal alterations using subtelomere FISH. NLB-derived cells integrated within the host tissue and showed expected differentiated phenotypes i.e. enteric neurons, glia and smooth muscle-like cells following in vivo transplantation. Our data suggest biological effects of the transplanted NLB cells on tissue contractility, although robust statistical results could not be obtained due to the small sample size. Further, it is unclear, which of the NLB cell types including neural progenitors have direct restoring effects or, alternatively may act via 'bystander' mechanisms in vivo. Our findings provide further evidence that NLB transplantation can be considered as feasible tool to improve ENS function in a variety of gastrointestinal disorders.
Gonorrhea, a sexually transmitted disease caused by the bacteria Neisseria gonorrhoeae, is characterized by a large number of neutrophils recruited to the site of infection. Therefore, proper modeling of the N. gonorrhoeae interaction with neutrophils is very important for investigating and understanding the mechanisms that gonococci use to evade the immune response. We have used a combination of a unique human 3D tissue model together with a dynamic culture system to study neutrophil transmigration to the site of N. gonorrhoeae infection. The triple co-culture model consisted of epithelial cells (T84 human colorectal carcinoma cells), human primary dermal fibroblasts, and human umbilical vein endothelial cells on a biological scaffold (SIS). After the infection of the tissue model with N. gonorrhoeae, we introduced primary human neutrophils to the endothelial side of the model using a perfusion-based bioreactor system. By this approach, we were able to demonstrate the activation and transmigration of neutrophils across the 3D tissue model and their recruitment to the site of infection. In summary, the triple co-culture model supplemented by neutrophils represents a promising tool for investigating N. gonorrhoeae and other bacterial infections and interactions with the innate immunity cells under conditions closely resembling the native tissue environment.