Refine
Has Fulltext
- yes (50)
Is part of the Bibliography
- yes (50)
Document Type
- Journal article (49)
- Preprint (1)
Keywords
- luminescence (10)
- boranes (8)
- boron (8)
- borylation (7)
- fluorescence (5)
- boronate esters (4)
- cross-coupling (4)
- fluoroarene (4)
- inorganic chemistry (4)
- singlet oxygen (4)
Institute
EU-Project number / Contract (GA) number
- 669054 (1)
We report herein the catalytic triboration of terminal alkynes with B\(_2\)pin\(_2\) (bis(pinacolato)diboron) using readily available Cu(OAc)\(_2\) and P\(^n\)Bu\(_3\). Various 1,1,2‐triborylalkenes, a class of compounds that have been demonstrated to be potential matrix metalloproteinase (MMP‐2) inhibitors, were obtained directly in moderate to good yields. The process features mild reaction conditions, a broad substrate scope, and good functional group tolerance. This copper‐catalyzed reaction can be conducted on a gram scale to produce the corresponding 1,1,2‐triborylalkenes in modest yields. The utility of these products was demonstrated by further transformations of the C−B bonds to prepare gem ‐dihaloborylalkenes (F, Cl, Br), monohaloborylalkenes (Cl, Br), and trans ‐diaryldiborylalkenes, which serve as important synthons and have previously been challenging to prepare.
The reactivity of a diruthenium tetrahydride complex towards three selected dihydroboranes was investigated. The use of [DurBH\(_{2}\)] (Dur=2,3,5,6‐Me\(_{4}\)C\(_{6}\)H) and [(Me\(_{3}\)Si)\(_{2}\)NBH\(_{2}\)] led to the formation of bridging borylene complexes of the form [(Cp\(^{*}\)RuH)\(_{2}\)BR] (Cp\(^{*}\)=C\(_{5}\)Me\(_{5}\); 1 a: R=Dur; 1 b: R=N(SiMe\(_{3}\))\(_{2}\)) through oxidative addition of the B−H bonds with concomitant hydrogen liberation. Employing the more electron‐deficient dihydroborane [3,5‐(CF\(_{3}\))\(_{2}\)‐C\(_{6}\)H\(_{3}\)BH\(_{2}\)] led to the formation of an anionic complex bearing a tetraarylated chain of four boron atoms, namely Li(THF)\(_{4}\)[(Cp\(^{*}\)Ru)\(_{2}\)B\(_{4}\)H\(_{5}\)(3,5‐(CF\(_{3}\))\(_{2}\)C\(_{6}\)H\(_{3}\))\(_{4}\)] (4), through an unusual, incomplete threefold dehydrocoupling process. A comparative theoretical investigation of the bonding in a simplified model of 4 and the analogous complex nido‐[1,2(Cp\(^{*}\)Ru)\(_{2}\)(μ‐H)B\(_{4}\)H\(_{9}\)] (I) indicates that there appear to be no classical σ‐bonds between the boron atoms in complex I, whereas in the case of 4 the B\(_{4}\) chain better resembles a network of three B−B σ bonds, the central bond being significantly weaker than the other two.
Catalytic C−X borylation of aryl halides containing two ortho‐fluorines has been found to be challenging, as most previous methods require stoichiometric amounts of base and the polyfluorinated aryl boronates suffer from protodeboronation, which is accelerated by ortho‐fluorine substituents. Herein, we report that a combination of Pd(dba)2 (dba=dibenzylideneacetone) with SPhos (2‐dicyclohexylphosphino‐2’,6’‐dimethoxybiphenyl) as a ligand is efficient to catalyze the C‐Cl borylation of aryl chlorides containing two ortho‐fluorine substituents. This method, conducted under base‐free conditions, is compatible with the resulting di‐ortho‐fluorinated aryl boronate products which are sensitive to base.
Wir berichten über die katalytische Triborierung terminaler Alkine mit B\(_2\)pin\(_2\) (Bis‐(pinakolato)‐dibor) unter Verwendung von einfach zugänglichem Cu(OAc)\(_2\) und P\(^n\)Bu\(_3\). Verschiedene 1,1,2‐Triborylalkene, eine Verbindungsklasse mit potentieller Funktion als Matrix‐Metallo‐Proteinase(MMP‐2)‐Inhibitor, werden direkt in mäßigen bis guten Ausbeuten erhalten. Das Verfahren zeichnet sich durch milde Reaktionsbedingungen, ein breites Substratspektrum und eine gute Verträglichkeit gegenüber funktionellen Gruppen aus. Diese Cu‐katalysierte Reaktion kann im Gramm‐Maßstab durchgeführt werden und liefert die entsprechenden 1,1,2‐Triborylalkene in mäßigen Ausbeuten. Die Verwendung solcher Verbindungen wird anhand weiterer Transformationen der C−B‐Bindungen zur Darstellung eines geminalen Dihalogenborylalkens (F, Cl, Br), eines Monohalogendiborylalkens (Cl, Br) und eines trans‐Diaryldiborylalkens demonstriert, welche bedeutende Synthesebausteine darstellen und bisher nur schwer zugänglich waren.
The steric and electronic properties of aryl substituents in monoaryl borohydrides (Li[ArBH\(_3\)]) and dihydroboranes were systematically varied and their reactions with [Ru(PCy\(_3\))\(_2\)HCl(H\(_2\))] (Cy: cyclohexyl) were studied, resulting in bis(σ)‐borane or terminal borylene complexes of ruthenium. These variations allowed for the investigation of the factors involved in the activation of dihydroboranes in the synthesis of terminal borylene complexes. The complexes were studied by multinuclear NMR spectroscopy, mass spectrometry, X‐ray diffraction analysis, and density functional theory (DFT) calculations. The experimental and computational results suggest that the ortho‐substitution of the aryl groups is necessary for the formation of terminal borylene complexes.
The NaOtBu‐catalyzed mixed 1,1‐diboration of terminal alkynes using the unsymmetrical diboron reagent BpinBdan (pin = pinacolato; dan = 1,8‐diaminonaphthalene) proceeds in a regio‐ and stereoselective fashion affording moderate to high yields of 1,1‐diborylalkenes bearing orthogonal boron protecting groups. It is applicable to gram‐scale synthesis without loss of yield or selectivity. The mixed 1,1‐diborylalkene products can be utilized in Suzuki–Miyaura cross‐coupling reactions which take place selectivly at the C–B site. DFT calculations suggest the NaOtBu‐catalyzed mixed 1,1‐diboration of alkynes occurs through deprotonation of the terminal alkyne, stepwise addition of BpinBdan to the terminal carbon followed by protonation with tBuOH. Experimentally observed selective formation of (Z)‐diborylalkenes is supported by our theoretical studies.
Using a new divergent approach, conjugated triarylborane dendrimers were synthesized up to the 2nd generation. The synthetic strategy consists of three steps: 1) functionalization, via iridium catalyzed C−H borylation; 2) activation, via fluorination of the generated boronate ester with K[HF\(_{2}\)] or [N(nBu\(_{4}\))][HF\(_{2}\)]; and 3) expansion, via reaction of the trifluoroborate salts with aryl Grignard reagents. The concept was also shown to be viable for a convergent approach. All but one of the conjugated borane dendrimers exhibit multiple, distinct and reversible reduction potentials, making them potentially interesting materials for applications in molecular accumulators. Based on their photophysical properties, the 1st generation dendrimers exhibit good conjugation over the whole system. However, the conjugation does not increase further upon expansion to the 2nd generation, but the molar extinction coefficients increase linearly with the number of triarylborane subunits, suggesting a potential application as photonic antennas.
A novel and convenient methodology for the one-pot synthesis of sterically congested triarylboranes by using bench-stable aryltrifluoroborates as the boron source is reported. This procedure gives systematic access to symmetrically and unsymmetrically substituted triarylboranes of the types BAr\(_{2}\)Ar’ and BArAr'Ar’’, respectively. Three unsymmetrically substituted triarylboranes as well as their iridium-catalyzed C−H borylation products are reported. These borylated triarylboranes contain one to three positions that can subsequently be orthogonally functionalized in follow-up reactions, such as Suzuki-Miyaura cross-couplings or Sonogashira couplings.
We report a transition metal‐free, regio‐ and stereo‐selective, phosphine‐catalyzed method for the trans hydroboration of 1,3‐diynes with pinacolborane that affords (E)‐1‐boryl‐1,3‐enynes. The reaction proceeds with excellent selectivity for boron addition to the external carbon of the 1,3‐diyne framework as unambiguously established by NMR and X‐ray crystallographic studies. The reaction displays a broad substrate scope including unsymmetrical diynes to generate products in high yield (up to 95 %). Experimental and theoretical studies suggest that phosphine attack on the alkyne is a key process in the catalytic cycle.
Novel dyes were prepared by simple “click CuAAC” attachment of a triarylborane–alkyne to the azide side chain of an amino acid yielding triarylborane dye 1 which was conjugated with pyrene (dye 2) forming a triarylborane–pyrene FRET pair. In contrast to previous cationic triarylboranes, the novel neutral dyes interact only with proteins, while their affinity to DNA/RNA is completely abolished. Both the reference triarylborane amino acid and triarylborane–pyrene conjugate bind to BSA and the hDPP III enzyme with high affinities, exhibiting a strong (up to 100-fold) fluorescence increase, whereby the triarylborane–pyrene conjugate additionally retained FRET upon binding to the protein. Furthermore, the triarylborane dyes, upon binding to the hDPP III enzyme, did not impair its enzymatic activity under a wide range of experimental conditions, thus being the first non-covalent fluorimetric markers for hDPP III, also applicable during enzymatic reactions with hDPP III substrates.
A series of bis‐(4’‐pyridylethynyl)arenes (arene=benzene, tetrafluorobenzene, and anthracene) were synthesized and their bis‐N‐methylpyridinium compounds were investigated as a class of π‐extended methyl viologens. Their structures were determined by single crystal X‐ray diffraction, and their photophysical and electrochemical properties (cyclic voltammetry), as well as their interactions with DNA/RNA were investigated. The dications showed bathochromic shifts in emission compared to the neutral compounds. The neutral compounds showed very small Stokes shifts, which are a little larger for the dications. All of the compounds showed very short fluorescence lifetimes (<4 ns). The neutral compound with an anthracene core has a quantum yield of almost unity. With stronger acceptors, the analogous bis‐N‐methylpyridinium compound showed a larger two‐photon absorption cross‐section than its neutral precursor. All of the dicationic compounds interact with DNA/RNA; while the compounds with benzene and tetrafluorobenzene cores bind in the grooves, the one with an anthracene core intercalates as a consequence of its large, condensed aromatic linker moiety, and it aggregates within the polynucleotide when in excess over DNA/RNA. Moreover, all cationic compounds showed highly specific CD spectra upon binding to ds‐DNA/RNA, attributed to the rare case of forcing the planar, achiral molecule into a chiral rotamer, and negligible toxicity toward human cell lines at ≤10 μM concentrations. The anthracene‐analogue exhibited intracellular accumulation within lysosomes, preventing its interaction with cellular DNA/RNA. However, cytotoxicity was evident at 1 μM concentration upon exposure to light, due to singlet oxygen generation within cells. These multi‐faceted features, in combination with its two‐photon absorption properties, suggest it to be a promising lead compound for development of novel light‐activated theranostic agents.
Defunctionalization of readily available feedstocks to provide alkenes for the synthesis of multifunctional molecules represents an extremely useful process in organic synthesis. Herein, we describe a transition metal-free, simple and efficient strategy to access alkyl 1,2-bis(boronate esters) via regio- and diastereoselective diboration of secondary and tertiary alkyl halides (Br, Cl, I), tosylates, and alcohols. Control experiments demonstrated that the key to this high reactivity and selectivity is the addition of a combination of potassium iodide and N,N-dimethylacetamide (DMA). The practicality and industrial potential of this transformation are demonstrated by its operational simplicity, wide functional group tolerance, and the late-stage modification of complex molecules. From a drug discovery perspective, this synthetic method offers control of the position of diversification and diastereoselectivity in complex ring scaffolds, which would be especially useful in a lead optimization program.
Herein, the copper-catalyzed borylation of readily available acyl chlorides with bis(pinacolato)diboron, (B\(_{2}\)pin\(_{2}\)) or bis(neopentane glycolato)diboron (B\(_{2}\)neop\(_{2}\)) is reported, which provides stable potassium acyltrifluoroborates (KATs) in good yields from the acylboronate esters. A variety of functional groups are tolerated under the mild reaction conditions (room temperature) and substrates containing different carbon-skeletons, such as aryl, heteroaryl and primary, secondary, tertiary alkyl are applicable. Acyl N-methyliminodiacetic acid (MIDA) boronates can also been accessed by modification of the workup procedures. This process is scalable and also amenable to the late-stage conversion of carboxylic acid-containing drugs into their acylboron analogues, which have been challenging to prepare previously. A catalytic mechanism is proposed based on in situ monitoring of the reaction between p-toluoyl chloride and an NHC-copper(I) boryl complex as well as the isolation of an unusual lithium acylBpinOBpin compound as a key intermediate.
We report four new luminescent tetracationic bis-triarylborane DNA and RNA sensors that show high binding affinities, in several cases even in the nanomolar range. Three of the compounds contain substituted, highly emissive and structurally flexible bis(2,6-dimethylphenyl-4-ethynyl)arene linkers (3: arene=5,5′-2,2′-bithiophene; 4: arene=1,4-benzene; 5: arene=9,10-anthracene) between the two boryl moieties and serve as efficient dual Raman and fluorescence chromophores. The shorter analogue 6 employs 9,10-anthracene as the linker and demonstrates the importance of an adequate linker length with a certain level of flexibility by exhibiting generally lower binding affinities than 3–5. Pronounced aggregation–deaggregation processes are observed in fluorimetric titration experiments with DNA for compounds 3 and 5. Molecular modelling of complexes of 5 with AT-DNA, suggest the minor groove as the dominant binding site for monomeric 5, but demonstrate that dimers of 5 can also be accommodated. Strong SERS responses for 3–5 versus a very weak response for 6, particularly the strong signals from anthracene itself observed for 5 but not for 6, demonstrate the importance of triple bonds for strong Raman activity in molecules of this compound class. The energy of the characteristic stretching vibration of the C≡C bonds is significantly dependent on the aromatic moiety between the triple bonds. The insertion of aromatic moieties between two C≡C bonds thus offers an alternative design for dual Raman and fluorescence chromophores, applicable in multiplex biological Raman imaging.
In recent years, research in the fields of optoelectronics, anion sensors and bioimaging agents have been greatly influenced by novel compounds containing triarylborane motifs. Such compounds possess an empty p‐orbital at boron which results in useful optical and electronic properties. Such a diversity of applications was not expected when the first triarylborane was reported in 1885. Synthetic approaches to triarylboranes underwent various changes over the following century, some of which are still used in the present day, such as the generally applicable routes developed by Krause et al. in 1922, or by Grisdale et al. in 1972 at Eastman Kodak. Some other developments were not pursued further after their initial reports, such as the synthesis of two triarylboranes bearing three different aromatic groups by Mikhailov et al. in 1958. This review summarizes the development of synthetic approaches to triarylboranes from their first report nearly 135 years ago to the present.
With the rapid development of the hexadehydro‐Diels‐Alder reaction (HDDA) from its first discovery in 1997, the question of whether a concerted or stepwise mechanism better describes the thermally activated formation of ortho‐benzyne from a diyne and a diynophile has been debated. Mechanistic and kinetic investigations were able to show that this is not a black or white situation, as minor changes can tip the balance. For that reason, especially, linked yne‐diynes were studied to examine steric, electronic, and radical‐stabilizing effects of their terminal substituents on the reaction mechanism and kinetics. Furthermore, the influence of the nature of the linker on the HDDA reaction was explored. The more recently discovered photochemical HDDA reaction also gives ortho‐arynes, which display the same reactivity as the thermally generated ones, but their formation might not proceed by the same mechanism. This minireview summarizes the current state of mechanistic understanding of the HDDA reaction.
We report herein a mild procedure for the copper‐catalyzed oxidative cross‐coupling of electron‐deficient polyfluorophenylboronate esters with terminal alkynes. This method displays good functional group tolerance and broad substrate scope, generating cross‐coupled alkynyl(fluoro)arene products in moderate to excellent yields. Thus, it represents a simple alternative to the conventional Sonogashira reaction.
We synthesized new pyrene derivatives with strong bis(para ‐methoxyphenyl)amine donors at the 2,7‐positions and n ‐azaacene acceptors at the K‐region of pyrene. The compounds possess a strong intramolecular charge transfer, leading to unusual properties such as emission in the red to NIR region (700 nm), which has not been reported before for monomeric pyrenes. Detailed photophysical studies reveal very long intrinsic lifetimes of >100 ns for the new compounds, which is typical for 2,7‐substituted pyrenes but not for K‐region substituted pyrenes. The incorporation of strong donors and acceptors leads to very low reduction and oxidation potentials, and spectroelectrochemical studies show that the compounds are on the borderline between localized Robin‐Day class‐II and delocalized Robin‐Day class‐III species.
Three novel tetracationic bis‐triarylboranes with 3,4‐ethylenedioxythiophene (EDOT) linkers, and their neutral precursors, showed significant red‐shifted absorption and emission compared to their thiophene‐containing analogues, with one of the EDOT‐derivatives emitting in the NIR region. Only the EDOT‐linked trixylylborane tetracation was stable in aqueous solution, indicating that direct attachment of a thiophene or even 3‐methylthiophene to the boron atom is insufficient to provide hydrolytic stability in aqueous solution. Further comparative analysis of the EDOT‐linked trixylylborane tetracation and its bis‐thiophene analogue revealed efficient photo‐induced singlet oxygen production, with the consequent biological implications. Thus, both analogues bind strongly to ds‐DNA and BSA, very efficiently enter living human cells, accumulate in several different cytoplasmic organelles with no toxic effect but, under intense visible light irradiation, they exhibit almost instantaneous and very strong cytotoxic effects, presumably attributed to singlet oxygen production. Thus, both compounds are intriguing theranostic agents, whose intracellular and probably intra‐tissue location can be monitored by strong fluorescence, allowing switching on of the strong bioactivity by well‐focused visible light.
Phenylpyridyl-fused boroles [TipPBB1]\(_4\) and TipPBB2 were synthesized and their properties investigated. [TipPBB1]\(_4\) forms a tetramer in both the solid state and solution. TipPBB2 contains a 4-coordinate boron atom in the solid state but dissociates to give a 3-coordinate boron species in solution. TipPBB2 shows interesting temperature-dependent dual fluorescence in solution because of the equilibrium between 3- and 4-coordinate boron species due to weak N⋅⋅⋅B intermolecular coordination.
Persistent room-temperature phosphorence from purely organic molecules and multi-component systems
(2021)
Recently, luminophores showing efficient room-temperature phosphorescence (RTP) have gained tremendous interest due to their numerous applications. However, most phosphors are derived from transition metal complexes because of their intrinsic fast intersystem crossing (ISC) induced by strong spin–orbit coupling (SOC) constants of the heavy metal.
Metal-free RTP materials are rare and have become a promising field because they are inexpensive and environmentally friendly. This review summarizes organic molecular materials with long triplet lifetimes at room temperature from the perspective of whether they stem from a molecular or multi-component system. Among purely organic phosphors, heteroatoms are usually introduced into the backbone in order to boost the singlet–triplet ISC rate constant.
In multi-component systems, useful strategies such as host–guest, polymer matrix, copolymerization, and supramolecular assembly provide a rigid matrix to restrict nonradiative pathways thus realizing ultralong RTP.
Two different chromophores, namely a dipolar and an octupolar system, were prepared and their linear and nonlinear optical properties as well as their bioimaging capabilities were compared. Both contain triphenylamine as the donor and a triarylborane as the acceptor, the latter modified with cationic trimethylammonio groups to provide solubility in aqueous media. The octupolar system exhibits a much higher two‐photon brightness, and also better cell viability and enhanced selectivity for lysosomes compared with the dipolar chromophore. Furthermore, both dyes were applied in two‐photon excited fluorescence (TPEF) live‐cell imaging.
We synthesized a series of new mono‐, di‐, tri‐ and tetra‐substituted perylene derivatives with strong bis(para‐methoxyphenyl)amine (DPA) donors at the uncommon 2,5,8,11‐positions. The properties of our new donor‐substituted perylenes were studied in detail to establish a structure‐property relationship. Interesting trends and unusual properties are observed for this series of new perylene derivatives, such as a decreasing charge transfer (CT) character with increasing number of DPA moieties and individual reversible oxidations for each DPA moiety. Thus, (DPA)‐Per possesses one reversible oxidation while (DPA)\(_{4}\)‐Per has four. The mono‐ and di‐substituted derivatives display unusually large Stokes shifts not previously reported for perylenes. Furthermore, transient absorption measurements of the new derivatives reveal an excited state with lifetimes of several hundred microseconds, which sensitizes singlet oxygen with quantum yields of up to 0.83.
Bis(1-(4-tolyl)-carboran-2-yl)-(4-tolyl)-borane [(1-(4-MeC\(_{6}\)H\(_{4}\))-closo-1,2-C\(_{2}\)B\(_{10}\)H\(_{10}\)-2-)\(_{2}\)(4-MeC\(_{6}\)H\(_{4}\))B] (1), a new bis(o-carboranyl)-(R)-borane was synthesised by lithiation of the o-carboranyl precursor and subsequent salt metathesis reaction with (4-tolyl)BBr\(_{2}\). Cyclic voltammetry experiments on 1 show multiple distinct reduction events with a one-electron first reduction. In a selective reduction experiment the corresponding paramagnetic radical anion 1\(^{.−}\) was isolated and characterized. Single-crystal structure analyses allow an in-depth comparison of 1, 1\(^{.−}\), their calculated geometries, and the S\(_{1}\) excited state of 1. Photophysical studies of 1 show a charge transfer (CT) emission with low quantum yield in solution but a strong increase in the solid state. TD-DFT calculations were used to identify transition-relevant orbitals.
A convenient and efficient one‐step synthesis of 1,1,1‐triborylalkanes was achieved via sequential dehydrogenative borylation and double hydroborations of terminal alkynes with HBpin (HBpin=pinacolborane) catalyzed by inexpensive and readily available Cu(OAc)\(_2\). This process proceeds under mild conditions, furnishing 1,1,1‐tris(boronates) with wide substrate scope, excellent selectivity, and good functional‐group tolerance, and is applicable to gram‐scale synthesis without loss of yield. The 1,1,1‐triborylalkanes can be used in the preparation of α‐vinylboronates and borylated cyclic compounds, which are valuable but previously rare compounds. Different alkyl groups can be introduced stepwise via base‐mediated deborylative alkylation to produce racemic tertiary alkyl boronates, which can be readily transformed into useful tertiary alcohols.
Rapid multiple-quantum three-dimensional fluorescence spectroscopy disentangles quantum pathways
(2019)
Coherent two-dimensional spectroscopy is a powerful tool for probing ultrafast quantum dynamics in complex systems. Several variants offer different types of information but typically require distinct beam geometries. Here we introduce population-based three-dimensional (3D) electronic spectroscopy and demonstrate the extraction of all fourth- and multiple sixth-order nonlinear signal contributions by employing 125-fold (1⨯5⨯5⨯5) phase cycling of a four-pulse sequence. Utilizing fluorescence detection and shot-to-shot pulse shaping in single-beam geometry, we obtain various 3D spectra of the dianion of TIPS-tetraazapentacene, a fluorophore with limited stability at ambient conditions. From this, we recover previously unknown characteristics of its electronic two-photon state. Rephasing and nonrephasing sixth-order contributions are measured without additional phasing that hampered previous attempts using noncollinear geometries. We systematically resolve all nonlinear signals from the same dataset that can be acquired in 8 min. The approach is generalizable to other incoherent observables such as external photoelectrons, photocurrents, or photoions.
Eine effiziente, einstufige Synthese von 1,1,1‐Trialkylalkanen durch die sequenzielle, dehydrierende Borylierung und zweifache Hydroborierung von terminalen Alkinen mit Pinakolboran (HBpin) wurde unter Verwendung des kostengünstigen und einfach zugänglichen Kupfersalzes Cu(OAc)2 als Katalysator realisiert. Das Verfahren zeichnet sich durch ein breites Substratspektrum, eine außerordentliche Selektivität und eine hohe Toleranz gegenüber funktionellen Gruppen aus. Zudem kann die Reaktion ohne Ausbeuteverlust im Gramm‐Maßstab durchgeführt werden. Die somit erhaltenen 1,1,1‐Trialkylalkane können Anwendungen in der Herstellung von synthetisch wertvollen und bislang schwer zugänglichen α‐Vinylboronaten und zyklischen Boryl‐Verbindungen finden. Verschiedene Alkylgruppen können stufenweise über eine basenvermittelte deborylierende Alkylierung eingeführt werden, um racemische, tertiäre Alkylboronate herzustellen, die einfach in nützliche tertiäre Alkohole umgewandelt werden können.
A nickel/N-heterocyclic carbene (NHC) catalytic system has been developed for the borylation of aryl sulfoxides with B\(_{2}\)(neop)\(_{2}\) (neop=neopentyl glycolato). A wide range of aryl sulfoxides with different electronic and steric properties were converted into the corresponding arylboronic esters in good yields. The regioselective borylation of unsymmetric diaryl sulfoxides was also feasible leading to borylation of the sterically less encumbered aryl substituent. Competition experiments demonstrated that an electron-deficient aryl moiety reacts preferentially. The origin of the selectivity in the Ni-catalyzed borylation of electronically biased unsymmetrical diaryl sulfoxide lies in the oxidative addition step of the catalytic cycle, as oxidative addition of methoxyphenyl 4-(trifluoromethyl)phenyl sulfoxide to the Ni(0) complex occurs selectively to give the structurally characterized complex trans-[Ni(ICy)\(_{2}\)(4-CF\(_{3}\)-C\(_{6}\)H\(_{4}\)){(SO)-4-MeO-C\(_{6}\)H\(_{4}\)}] 4. For complex 5, the isomer trans-[Ni(ICy)\(_{2}\)(C\(_{6}\)H\(_{5}\))(OSC\(_{6}\)H\(_{5}\))] 5-I was structurally characterized in which the phenyl sulfinyl ligand is bound via the oxygen atom to nickel. In solution, the complex trans-[Ni(ICy)\(_{2}\)(C\(_{6}\)H\(_{5}\))(OSC\(_{6}\)H\(_{5}\))] 5-I is in equilibrium with the S-bonded isomer trans-[Ni(ICy)\(_{2}\)(C\(_{6}\)H\(_{5}\))(SOC\(_{6}\)H\(_{5}\))] 5, as shown by NMR spectroscopy. DFT calculations reveal that these isomers are separated by a mere 0.3 kJ/mol (M06/def2-TZVP-level of theory) and connected via a transition state trans-[Ni(ICy)\(_{2}\)(C\(_{6}\)H\(_{5}\))(η\(^{2}\)-{SO}-C\(_{6}\)H\(_{5}\))], which lies only 10.8 kcal/mol above 5.
A novel protocol for the transition metal-free 1,2-addition of polyfluoroaryl boronate esters to aldehydes and ketones is reported, which provides secondary alcohols, tertiary alcohols, and ketones. Control experiments and DFT calculations indicate that both the ortho-F substituents on the polyfluorophenyl boronates and the counterion K\(^+\) in the carbonate base are critical. The distinguishing features of this procedure include the employment of commercially available starting materials and the broad scope of the reaction with a wide variety of carbonyl compounds giving moderate to excellent yields. Intriguing structural features involving O−H⋅⋅⋅O and O−H⋅⋅⋅N hydrogen bonding, as well as arene-perfluoroarene interactions, in this series of racemic polyfluoroaryl carbinols have also been addressed.
Two different chromophores, namely a dipolar and an octupolar system, were prepared and their linear and nonlinear optical properties as well as their bioimaging capabilities were compared. Both contain triphenylamine as the donor and a triarylborane as the acceptor, the latter modified with cationic trimethylammonio groups to provide solubility in aqueous media. The octupolar system exhibits a much higher two‐photon brightness, and also better cell viability and enhanced selectivity for lysosomes compared with the dipolar chromophore. Furthermore, both dyes were applied in two‐photon excited fluorescence (TPEF) live‐cell imaging.