Refine
Has Fulltext
- yes (4)
Is part of the Bibliography
- yes (4)
Document Type
- Journal article (3)
- Doctoral Thesis (1)
Keywords
- water purification (2)
- Adsorption (1)
- Eisenoxide (1)
- FE (1)
- Ferrite (1)
- Magnetisches Trennverfahren (1)
- Materialentwicklung (1)
- MgAl LDH (1)
- Nano (1)
- Phosphatentfernung (1)
Institute
- Institut für Funktionsmaterialien und Biofabrikation (4) (remove)
EU-Project number / Contract (GA) number
- 645993 (1)
Here, we report a continuous flow synthesis of nano LDH, comprising a continuous precipitation process using static mixers and followed by an immediate cleaning process via a semi-continuous centrifuge to obtain the final product in one-go. Via this synthesis setup, it is possible to independently vary the concentrations of the reactants during precipitation and at the same time ensure constant reaction conditions and an immediate "quenching" of the precipitate due to "on the flow"-washing. We found that this paves the way to adjust the synthesis parameters in a way that the final morphology of the nano-LDH particles can be controlled to be either round or platelet-like.
The maximum magnetisation (saturation magnetisation) obtainable for iron oxide nanoparticles can be increased by doping the nanocrystals with non-magnetic elements such as zinc. Herein, we closely study how only slightly different synthesis approaches towards such doped nanoparticles strongly influence the resulting sub-nano/atomic structure. We compare two co-precipitation approaches, where we only vary the base (NaOH versus NH\(_3\)), and a thermal decomposition route. These methods are the most commonly applied ones for synthesising doped iron oxide nanoparticles. The measurable magnetisation change upon zinc doping is about the same for all systems. However, the sub-nano structure, which we studied with Mossbauer and X-ray absorption near edge spectroscopy, differs tremendously. We found evidence that a much more complex picture has to be drawn regarding what happens upon Zn doping compared to what textbooks tell us about the mechanism. Our work demonstrates that it is crucial to study the obtained structures very precisely when "playing'' with the atomic order in iron oxide nanocrystals.
Micron‐sized supraparticles, consisting of a plurality of discrete nano‐ and microscale functional units, are assembled and fused by means of a droplet extrusion process. By combining nano magnetite, activated carbon, and conductive carbon with a polymeric binder matrix, particles are obtained which unite good magnetic properties, electrical conductivity, and adsorber activity through the high accessible surface area of the incorporated activated carbon of about 570 m\(^{2}\) g\(^{-1}\), thereby enabling a new approach toward sustainable water treatment processes. Due to the interplay of the components, it is possible to adsorb target substances, dissolved in the water which is demonstrated by the adsorption of the model dye methylene blue. A very fast adsorption kinetic and an adsorption capacity of about 400 mg g\(^{-1}\) is determined. By using the developed composite particles, it is also possible to electrochemically alter substances flowing through a magnetically‐stabilized fluidized‐bed reactor by electrochemically charging/discharging, significantly supported by the magnetic field enabling alternatingly optimum mobility/adsorption phases with contact/charging intervals. The electrochemical conversion can be increased up to 151% depending on the applied flow‐rate and electrical voltage. By applying an external magnetic field, a further increase of electrochemical conversion of up to 70% can be observed.
In der vorliegenden Arbeit wurden magnetische Kompositpartikel für den Einsatz in Flüssigkeiten entwickelt. Der Aufbau der Partikel erfolgte dabei modular, sodass eine Anpassung an verschiedene Einsatzmöglichkeiten realisierbar sein sollte. Die gezeigten Arbeiten bauen auf Partikeln bestehend aus magnetischen Nanopartikeln eingebettet in eine Silica-Matrix als Trägerpartikel auf, welche im Rahmen der vorliegenden Arbeit weiterentwickelt wurden. Der Schwerpunkt lag dabei auf der Entwicklung eines Adsorbermaterials für Phosphat als Funktionalisierung für die magnetischen Trägerpartikel, welches für den Einsatz der Entfernung von Phosphat aus kommunalem Abwasser geeignet sein sollte, sowie dessen Einsatz im Labor- und Technikumsmaßstab. Besonderes Augenmerk lag auf der umfassenden Charakterisierung des entwickelten Matrerials sowie der Aufklärung des Wirkmechanismus bei der Phosphatadsorption. Ein weiterer Teil der Arbeit beschäftigte sich mit der Steigerung der Magnetisierung des magnetischen Anteils der Partikel für eine verbesserte magnetische Abtrennung. Um die vielseitige Einsetzbarkeit der magnetischen Trägerpartikel zu demonstrieren, wurden abschließend weitere Funktionalisierungen für diese entwickelt und deren Anwendbarkeit grundlegend getestet. So wurde zum einen eine Modifizierung mit Komplexverbindungen und Metal-Organic Frameworks (MOF) realisiert mit dem möglichen Einsatzgebiet der Wasserdetektion in organischen Lösemitteln. Zum anderen wurde eine Beschichtung mit Kohlenstoff durchgeführt und die Entfernung von organischen Farbstoffmolekülen aus Wasser untersucht.