Refine
Has Fulltext
- yes (72)
Is part of the Bibliography
- yes (72)
Year of publication
Document Type
- Doctoral Thesis (72)
Keywords
- Bor (21)
- Borylene (15)
- Diboren (10)
- Mehrfachbindung (9)
- Reaktivität (8)
- Diborene (7)
- Borole (6)
- Carbene (6)
- NHC (6)
- Borheterocyclen (5)
Institute
Sonstige beteiligte Institutionen
Durch Untersuchungen zur Reaktivität von Boryl- und Boridverbindungen konnten deren Bindungssituationen aufgeklärt und neuartige Koordinationsmotive von Übergangsmetall-Bor-Verbindungen erhalten werden. Die erhaltenen Verbindungen wurden mittels NMR-Spektroskopie, IR-Spektroskopie, Elementaranalyse und Röntgendiffraktometrie untersucht und zusätzlich wurden DFT-Rechnungen angefertigt.
An verschieden substituierten Eisenborylkomplexen wurden Reaktivitätsuntersuchungen gegenüber Halogenidabstraktionsmitteln und Reduktionsmitteln durchgeführt und im Falle der Boridkomplexe wurden Verbindungen mit bis dato unbekanntem Strukturmotiv erhalten.
Using Photoionization to Investigate Reactive Boron Species and the Kinetics of Hydrocarbon Radicals
(2021)
This thesis highlights the importance of isomer-selective approaches for the complete analysis of chemical processes. The method of choice is photoelectron/photoion coincidence spectroscopy, which allows simultaneous detection of electrons and ions coming from a single ionization event. Ionization techniques are sensitive and can record multiple species simultaneously, rendering them ideal tools to probe molecular transformations. Coupling these setups to synchrotron radiation allows one to analyze complex mixtures with isomer selectivity, based on ionization energies and vibrational structure in the cation, without any prior separation steps. Only few setups exist that can be used to gather these data, although their impact and applicability is growing steadily in various fields. For closed-shell species an easier and more widely used method is gas-chromatography, but most open shell species would not survive the separation process. Due to the reactivity of radicals they have to be created by selectively converting stable precursor molecules. Depending on the radical generation method different properties can be investigated ranging from thermodynamic data, over concentrations in high temperature environments, to chemical kinetics.
The first part of this thesis deals with the determination of bimolecular rate constants. Isomeric hydrocarbon radicals were generated by a high intense UV light pulses and their kinetics with oxygen was measured. The pressure dependence of different isomers in the falloff region was compared to theoretical models, and their reactivity could be explained.
The second part deals with boron containing compounds in various electronic situations. The corresponding precursors were successfully synthesized or could be bought. They were subjected to fluorine atoms in chemical reactors or destroyed pyrolytically at high temperatures. Most investigated species exhibited vibronic effects that could be elucidated using high level computations.
Zusammenfassung
Die vorliegende Arbeit wurde in drei Teilbereiche untergliedert. Der erste Teil beschäftigte sich mit der Untersuchung des anionischen Systems K[(OC)3M(PMe3)(SiR3)] (M = Fe, Ru, Os; R = Me, Et, Ph) und dessen Reaktivität gegenüber Dihalogenboranen. Der zweite Teil widmete sich der Untersuchung der Reaktivät des Eisenbis(borylen)komplexes 45 gegenüber verschiedenen Lewis-Basen und Lewis-Säuren. Im letzten Teil der Arbeit wurde die Insertion von Metallfragmenten der Übergangsmetalle der Gruppe 8 in die M=B-Doppelbindung des Borylenkomplexes 28 untersucht.
Durch Umsetzungen der anionischen Osmiumverbindung 64 mit Cl2BDur und Br2BDur konnten die Borylkomplexe 67 und 68 erhalten werden (SCHEMA 56). Die Untersuchungen zum sterischen Einfluss des Silylsubstituenten zeigten, dass die Osmiumkomplexe 65 und 66 mit SiEt3- bzw. SiPh3-Substituenten in die entsprechenden Borylkomplexe überführt werden können, wobei diese Spezies nicht analysenrein isoliert werden konnten.
Der Borylkomplex 68 konnte nachfolgend weder unter thermischen Bedingungen, noch unter Verwendung der Lewis-Base Pyridin bzw. des Halogenabstraktionsmittels Na[BArCl4] in einen terminalen Osmiumborylenkomplex umgewandelt werden (Schema 57).
Anfängliche Studien zur Reaktivität der anionischen Rutheniumverbindungen 81-83 gegenüber Dihalogenboranen haben sich auf den sterischen Einfluss der borgebundenen Arylsubstituenten konzentriert. Hierdurch konnte gezeigt werden, dass eine Ph-Substitution keine ausreichende Stabilisierung der entstehenden Borylkomplexe liefert. Im Gegensatz dazu erwies sich der sterische Anspruch von Duryl- und Mesitylsubsituenten als ideal für die Bildung stabiler Borylkomplexe, wohingegen die sterische Überfrachtung der Supermesityl- und Terphenylsubstituenten eine Salzeliminierungsreaktion von vornherein verhindert.
Der Einfluss des Halogensubstituenten in X2BDur (X = Cl, Br) wurde anhand der Reaktivität gegenüber 81 näher untersucht. In beiden Fällen konnten die entsprechenden Borylkomplexe 84 und 85 isoliert und charakterisiert werden. Da bei der Umsetzung mit Br2BDur auch noch weitere Produkte zu erkennen waren, wurde der sterische Einfluss des Silylsubstituenten in 82 und 83 auf die Produktverteilung bei Reaktion mit Br2BDur untersucht. Es hat sich gezeigt, dass die Wahl der Reaktionsbedingungen einen starken Einfluss auf den Reaktionsverlauf ausübt. So konnte durch regelmäßiges Entgasen der Reaktionslösung der Rutheniumborylenkomplex 86 erhalten werden, während eine thermische Reaktionsführung unter CO-Atmosphäre selektiv zu einer Silylboraneliminierung führte, dessen Produkt indirekt über die Bildung von [(OC)4Ru(PMe3)] (75) nachgewiesen werden konnte (Schema 59).
Während die Umsetzung der analogen Eisenspezies K[(OC)3Fe(PMe3)(SiEt3)] (92) mit Cl2BDur lediglich zu Zersetzung führte, konnte im Verlauf der Reaktion mit Br2BDur eine neue, sehr interessante Reaktivität beobachtet werden. Hier war die Salzeliminierungsreaktion mit einer Alkylboraneliminierung verbunden, wobei der intermediär entstehende Silylenkomplex (95) in situ zum dinuklearen, zweifach-verbrückten Bis(silylen)komplex 94 dimerisierte (SCHEMA 60). Unter photolytischen Bedingungen konnte 94 weiter in den dreifach-verbrückten Bis(silylen)komplex 96 überführt werden, welcher den ersten strukturell charaktersierten Komplex dieser Art darstellt.
In SCHEMA 61 sind alle relevanten Reaktivitäten des Systems K[(OC)3M(PMe3)(SiR3)] gegenüber X2BDur (X = Cl, Br) zusammen mit den Ergebnissen vorangegangener Arbeiten in einer Übersicht dargestellt.
Der zweite Teil dieser Arbeit beschäftigte sich mit der Reaktivität des Eisenbis(borylen)komplexes [(OC)3Fe(=BDur){=BN(SiMe3)2}] (45). Zunächst wurde 45 mit verschiedenen Lewis-Basen umgesetzt. Während die Umsetzungen mit verschiedenen NHCs (IMe, IMes, IDipp) nur zu Zersetzung führte, konnte durch die Reaktion mit cAACMe der außergewöhnliche Komplex 98 isoliert und vollständig charakterisiert werden (SCHEMA 62). Dieser stellt das erste Beispiel für eine intramolekulare Spaltung eines Carbonylliganden in einem einkernigen Komplex dar.
Anschließend wurde die Reaktivität von 45 gegenüber den Lewis-Säuren BBr3, AlBr3 und GaBr3 untersucht. Während die Umsetzung von 45 mit AlBr3 lediglich zu Zersetzung führte, konnte mit GaBr3 als Hauptprodukt Br2BDur nachgewiesen werden. In einem möglichen Reaktionsmechanismus ist die Reaktion mit einer 1,2-Addition des GaBr3 unter Bildung eines Gallylkomplexes verbunden, welcher nach Abspaltung von Br2BDur in einen instabilen Gallylenkomplex übergeht (SCHEMA 63).
Die Umsetzung von 45 mit BBr3 lieferte bei tiefen Temperaturen den zweikernigen Tris(borylen)komplex 100 (SCHEMA 64), welcher ein Analogon des wohlbekannten Fe2(CO)9 darstellt.
Das abschließende Kapitel dieser Arbeit befasste sich mit der Insertion von Metallfragmenten der Gruppe 8-Übergangsmetalle in die M=B-Doppelbindung von [(OC)5Mo=BN(SiMe3)2] (28). Während bei den Umsetzungen von 28 mit [(OC)4Fe(PMe3)] (90) und [(OC)4Ru(PMe3)] (75) die MOLPs 104 und 105 nur NMR-spektroskopisch nachgewiesen werden konnten, war die Isolierung des MOLPs 103 sowie dessen strukturelle Charakterisierung möglich (SCHEMA 65). Bemerkenswert ist hierbei, dass die Reaktion sowohl unter thermischen als auch unter photolytischen Bedingungen durchgeführt werden kann.
Der erste Teil dieser Arbeit beschäftigt sich mit der "Synthese und Reaktivität sterisch anspruchsvoller Iminoborane". Dabei war es möglich, ausgehend von einem Terphenylamin geeignete Aminoborane zu synthetisieren, welche anschließend mit starken, nicht-nukleophilen Basen umgesetzt wurden. Mittels formaler HCl-Eliminierung mit LiTmp gelang auf diese Weise die Darstellung sterisch anspruchsvoller Iminoborane.
Der zweite Teil dieser Arbeit befasst sich mit der "Untersuchung von B-B-Doppelbindungen als Bestandteil konjugierter p-Systeme". Durch die Verwendung von sterisch wenig anspruchsvollen Liganden oder Boryl-Substituenten war es möglich planare Diboren-Systeme zu generieren und darüberhinaus Divinyldiborene darzustellen.
This work involves the synthesis and reactivity of pseudohalide-substituted boranes and borylenes. A series of compounds of the type (CAAC)BR2Y (CAAC = cyclic alkyl(amino)carbene; R = H, Br; Y = CN, NCS, PCO) were prepared first. The two-electron reduction of (CAAC)BBr2Y (Y = CN, NCS) in the presence of a second Lewis base L (L = N-heterocyclic carbene) resulted in the formation of the corresponding doubly Lewis base-stabilized pseudohaloborylenes (CAAC)(L)BY. These borylenes show versatile reactivity patterns, including their oxidation to the corresponding radical cations, coordination via the respective pseudohalide substituent to group 6 metal carbonyl complexes, as well as a boron-centered protonation with Brønsted acids to boronium cations. Reduction of (CAAC)BBr2(NCS) in the absence of a second donor ligand, led to the formation of boron-doped thiazolothiazoles via reductive dimerization of two isothiocyanatoborylenes. These B,N,S-heterocycles possess a low degree of aromaticity as well as interesting photophysical properties and can furthermore be protonated as well as hydroborated. Additionally, CAAC adducts of the parent boraphosphaketene (CAAC)BH2(PCO) could be prepared, which readily reacted with boroles [Ph4BR'] (R' = aryl) via decarbonylation in a ring expansion reaction. The obtained 1,2-phosphaborinines represent B,P-isosteres of benzene and consequently could be coordinated to metal carbonyl complexes of the chromium triade via η6-coordination, resulting in new half-sandwich complexes thereof.
The photochemistry and photophysics of transition metal complexes are of great interest, since such materials can be exploited for a wide range of applications such as in photocatalysis, sensing and imaging, multiphoton-absorption materials and the fabrication of OLEDs. A full understanding of the excited state behavior of transition metal compounds is therefore important for the design of new materials for the applications mentioned above. In principle, the luminescence properties of this class of compounds can be tuned by changing the metal or subtle changes in the ligand environment.
Furthermore, transition-metal complexes continue to play a major role in modern synthetic chemistry. In particular, they can realize selective transformations that would either be difficult or impossible by conventional organic chemistry. For example, they enable the efficient and selective formation of carbon–carbon bonds. One famous example of these types of transformations are metal-catalyzed cyclization reactions. Herein, metallacyclopentadiene complexes are considered as key intermediates in a number of metal-mediated or -catalyzed cyclization reactions, i.e. the [2+2+2] cyclotrimerization of alkynes. Recent research has focused on the synthesis and characterization of these metallacyclic intermediates such as MC4 ring systems. Metallacyclopentadienes are structurally related to main group EC4 systems such as boroles, siloles, thiophenes and phospholes. Overall, this group of compounds (EC4 analogues) is well known and has attracted significant attention due to their electron-transport and optical properties. Unlike transition metal analogues, however, these EC4 systems show no phosphorescence, which is due to inefficient SOC compared to 2nd and 3rd row transition metals, which promoted us to explore the phosphorescence potential of metallacyclopentadienes.
In 2001, Marder et al. developed a one-pot high-yield synthesis of luminescent 2,5 bis(arylethynyl)rhodacyclopentadienes by reductive coupling of 1,4-diarylbuta-1,3-diynes at a suitable rhodium(I) precursor. Over the past years, a variety of ligands (e.g. TMSA, S,S’ diethyldithiocarbamate, etc.) and 1,4-bis(p-R-phenyl)-1,3-butadiynes or linked , bis(p-R-arylethynyl)alkanes (R = electron withdrawing or donating groups) were investigated and always provided a selective formation of 2,5 bis(arylethynyl)rhodacyclopentadienes, which were reported to be fluorescent despite presence of the heavy atom. To examine the influence of the ligand sphere around the rhodium center on the intersystem-crossing (ISC) processes in the above-mentioned fluorescent rhodacyclopentadienes and to increase the metal character in the frontier orbitals by destabilizing the Rh filled d-orbitals, a -electron donating group was introduced, namely acetylacetonato (acac). Interestingly, in 2010 Tay reacted [Rh(κ2-O,O-acac)(PMe3)2] with ,-bis(p-R-arylbutadiynyl)alkanes and observed not only the fluorescent 2,5 bis(arylethynyl)rhodacyclopentadienes, but also rhodium 2,2’-bph complexes as products, which were reported to be phosphorescent in preliminary photophysical studies.
In this work, the reaction behavior of [Rh(κ2-O,O-acac)(L)2] (L = PMe3, P(p-tolyl)3) with different ,-bis(p-R-arylbutadiynyl)alkanes was established. Furthermore, the separation of the two isomers 2,5-bis(arylethynyl)rhodacyclopentadienes (A) and rhodium 2,2’-bph complexes (B), and the photophysical properties of those were explored in order to clarify their fundamentally different excited state behaviors.
Reactions of [Rh(κ2-O,O-acac)(P(p-tolyl3)2)] with ,-bis(arylbutadiynyl)alkanes gives exclusively weakly fluorescent 2,5-bis(arylethynyl)rhodacyclopentadienes. Changing the phosphine ligands to PMe3, reactions of [Rh(κ2-O,O-acac)(PMe3)2] and , bis(arylbutadiynyl)alkanes afford two isomeric types of MC4 metallacycles with very different photophysical properties, as mentioned before.
As a result of a normal [2+2] reductive coupling at rhodium, 2,5 bis(arylethynyl)rhodacyclopentadienes (A) are formed, which display intense fluorescence. Rhodium 2,2’-bph complexes (B), which show phosphorescence, have been isolated as a second isomer originating from an unusual [4+2] cycloaddition reaction and a subsequent -H-shift. Control of the isomer distribution, of 2,5-bis(arylethynyl)rhodacyclopentadienes (A) and rhodium biphenyl complexes (B), is achieved by modification of the linked , bis(arylbutadiynyl)alkane.
Changing the linker length from four CH2 to three CH2 groups, dramatically favors the formation of the rhodium biphenyl isomer B, providing a fundamentally new route to access photoactive metal biphenyl compounds in good yields. This is very exciting as the photophysical properties of only a limited number of bph complexes of Ir, Pd and Pt had been explored. The lack of photophysical reports in the literature is presumably due to the limited synthetic access to various substituted 2,2’-bph transition metal complexes.
On the other hand, as the reaction of [Rh(κ2-O,O-acac)(P(p-tolyl)3)2] with , bis(arylbutadiynyl)alkanes provides a selective reaction to give weakly fluorescent 2,5 bis(arylethynyl)rhodacyclopentadiene complexes with P(p-tolyl)3 as phosphine ligands, a different synthetic access to 2,5-bis(arylethynyl)rhodacyclopentadiene complexes with PMe3 as phosphine ligands was developed, preventing the time-consuming separation of the isomers. The weak rhodium-phosphorus bonds of 2,5-bis(arylethynyl)rhodacyclopentadiene complexes bearing P(p tolyl)3 as phosphine ligands, relative to those of related PMe3 complexes, allowed for facile ligand exchange reactions. In the presence of an excess of PMe3, a stepwise reaction was observed, giving first the mono-substituted, mixed-phosphine rhodacyclopentadiene intermediates and, subsequently, full conversion to the highly fluorescent 2,5 bis(arylethynyl)-rhodacyclopentadienes bearing only PMe3 ligands (by increasing the reaction temperature).
With spectroscopically pure 2,5-bis(arylethynyl)rhodacyclopentadiene complexes A (bearing PMe3 as phosphine ligands) and rhodium 2,2-bph complexes B in hand, photophysical studies were conducted. The 2,5-bis(arylethynyl)rhodacyclopentadienes (A) are highly fluorescent with high quantum yields up to 54% and very short lifetimes (τ = 0.2 – 2.5 ns) in solution at room temperature. Even at 77 K in glass matrices, no additional phosphorescence is observed which is in line with previous observations made by Steffen et al., who showed that SOC mediated by the heavy metal atom in 2,5-bis(arylethynyl)rhodacyclopentadienes and 2,5 bis(arylethynyl)iridacyclopentadienes is negligible. The origin of this fluorescence lies in the pure intra-ligand (IL) nature of the excited states S1 and T1. The HOMO and the LUMO are nearly pure and * ligand orbitals, respectively, and the HOMO is energetically well separated from the filled rhodium d orbitals. The absence of phosphorescence in transition metal complexes due to mainly IL character of the excited states is not unusual, even for heavier homologues than rhodium with greater SOC, resulting in residual S1 emission (fluorescence) despite ISC S1→Tn being sufficiently fast for population of T1 states. However, there are very few complexes that exhibit fluorescence with the efficiency displayed by our rhodacyclopentadienes, which involves exceptionally slow S1→Tn ISC on the timescale of nanoseconds rather than a few picoseconds or faster.
In stark contrast, the 2,2’-bph rhodium complexes B are exclusively phosphorescent, as expected for 2nd-row transition metal complexes, and show long-lived (hundreds of s) phosphorescence (Ф = 0.01 – 0.33) at room temperature in solution. As no fluorescence is detected even at low temperature, it can be assumed that S1→Tn ISC must be faster than both fluorescence and non-radiative decay from the S1 state. This contrasts with the behavior of the isomeric 2,5-bis(arylethynyl)rhodacyclopentadienes for which unusually slow ISC occurs on a timescale that is competitive with fluorescence (vide supra). The very small values for the radiative rate constants, however, indicate that the nature of the T1 state is purely 3IL with weak SOC mediated by the Rh atom. The phosphorescence efficiency of these complexes in solution at room temperature is even more impressive, as non-radiative coupling of the excited state with the ground state typically inhibits phosphorescence. Instead, the rigidity of the organic -system allows the ligand-based excited triplet state to exist in solution for up to 646 s and to emit with high quantum yields for biphenyl complexes. The exceptionally long lifetimes and small radiative rate constants of the rhodium biphenyl complexes are presumably a result of the large conjugated -system of the organic ligand. According to TD DFT studies, the T1 state involves charge-transfer from the biphenyl ligand into the arylethynyl moiety away from the rhodium atom. This reduces the SOC of the metal center that would be necessary for fast phosphorescence. These results show that the π-chromophoric ligand can gain control over the photophysical excited state behavior to such an extent that even heavy transition metal atoms like rhodium participate in increasing the fluorescence such as main-group analogues do. Furthermore, in the 2,2’-bph rhodium complexes, the rigidity of the organic -system allows the ligand-based excited triplet state to exist in solution for up to hundreds of s and to emit with exceptional quantum yields.
Therefore, investigations of the influence of the ligand sphere around the rhodium center have been made to modify the photophysical properties and furthermore to explore the reaction behavior of these rhodium complexes. Bearing in mind that the P(p-tolyl)3 ligands can easily be replaced by the stronger -donating PMe3 ligands, ligand exchange reactions with N heterocyclic carbenes (NHCs) as even stronger -donors was investigated. Addition of two equivalents of NHCs at room temperature led to the release of one equivalent of P(p-tolyl3) and formation of the mono-substituted NHC rhodium complex. The reaction of isolated mono-NHC complex with another equivalent of NHC at room temperature did not result in the exchange of the second phosphine ligand. Moderate heating of the reaction to 60 °C, however, resulted in the formation of tetra-substituted NHC rhodium complex [Rh(nPr2Im)4]+[acac]-. To circumvent the loss of the other ligands in the experiments described above, a different approach was investigated to access rhodacyclopentadienes with NHC instead of phosphine ligands.
Reaction of the bis-NHC complex [Rh(κ2-O,O-acac)(nPr2Im)2] with , bis(arylbutadiynyl)alkanes at room temperature resulted 2,5-bis(arylethynyl)-rhodacyclopentadienes with the NHC ligands being cis or trans to each other as indicated by NMR spectroscopic measurements and single-crystal X-ray diffraction analysis. Isolation of clean material and a fundamental photophysical study could not be finished for reasons of time within the scope of this work.
Furthermore, shortening of the well conjugated -system of the chromophoric ligand (changing from tetraynes to diynes) was another strategy to examine the reaction behavior of theses ligands with rhodium(I) complexes and to modify the excited state behavior of the formed rhodacyclopentadienes. The reaction of [Rh(κ2-O,O-acac)(PMe3)2] with 1,7 diaryl 1,6-heptadiynes (diynes) leads to the selective formation of 2,5 bis(aryl)rhodacyclopentadienes. These compounds, however, are very weakly fluorescent with quantum yields ФPL < 1, and very short emission lifetimes in toluene at room temperature. Presumably, vibrational modes of the bis(phenyl)butadiene backbone leads to a higher rate constant for non-radiative decay and is thus responsible for the low quantum yields compared to their corresponding PMe3 complexes with the bis(phenylethynyl)butadiene backbone at room temperature. No additional phosphorescence, even at 77 K in the glass matrix is observed.
Chancing the phosphine ligands to P(p-tolyl)3, reactions of [Rh(κ2-O,O-acac)(P(p-tolyl3)2)] with 1,7-diaryl-1,6-heptadiynes, however, resulted in a metal-mediated or -catalyzed cycloaddition reaction of alkynes and leads to full conversion to dimerization and trimerization products and recovery of the rhodium(I) starting material. This is intuitive, considering that P(Ar)3 (Ar = aryl) ligands are considered weaker -donor ligands and therefore have a higher tendency to dissociate. Therefore, rhodium(I) complexes with aryl phosphines as ligands have an increasing tendency to promote catalytic reactions, while the stronger -donating ligands (PMe3 or NHCs) promote the formation of stable rhodium complexes.
Finally, in Chapter 4, the findings of the work conducted on N-heterocyclic carbenes (NHCs) and cyclic (alkyl)(amino)carbenes (CAACs) is presented. These compounds have unique electronic and steric properties and are therefore of great interest as ligands and organo-catalysts. In this work, studies of substitution reactions involving novel carbonyl complexes of rhodium and nickel are reported. For characterization and comparison of CAACmethyl with the large amount of data available for NHC and sterically more demanding CAAC ligands, an overview on physicochemical data (electronics, sterics and bond strength) is provided.
The reaction of [Rh(-Cl)(CO)2]2 with 2 equivalents of CAACmethyl at low temperature afforded the mononuclear complex cis-[(RhCl(CO)2(CAACmethyl)]. However, reacting [Rh( Cl)(CO)2]2 with CAACmethyl at room temperature afforded a mixture of complexes. The mononuclear complex [(RhCl(CO)(CAACmethyl)2], the chloro-bridged complexes [(Rh2( Cl)2(CO)3(CAACmethyl)], [Rh(-Cl)(CO)(CAACmethyl)]2 and a carbon monoxide activation product were formed. The carbon monoxide activation product is presumably formed via the reaction of two equivalents of the CAAC with CO to give the bis-carbene adduct of CO, and subsequent rearrangement via migration of the Dipp moiety. While classical N-heterocyclic carbenes are not electrophilic enough to react with CO, related diamidocarbenes and alkyl(amino)carbenes undergo addition reactions with CO to give the corresponding ketenes. Consequently, to obtain the CAAC-disubstituted mononuclear complex selectively, 8 equivalents of CAACmethyl were reacted with 1 equivalent of [Rh(-Cl)(CO)2]2. For the evaluation of TEP values, [Ni(CO)3(CAAC)] was synthesized in collaboration with the group of Radius. With the complexes [(RhCl(CO)(CAACmethyl)2] and [Ni(CO)3(CAAC)] in hand, it was furthermore possible to examine the electronic and steric parameters of CAACmethyl. Like its bulkier congeners CAACmenthyl and CAACcy, the methyl-substituted CAAC is proposed to be a notably stronger -donor than common NHCs. While it has a very similar TEP value of 2046 cm-1, it additionally possess superior -acceptor properties (P = 67.2 ppm of phosphinidene adduct).
CAACs appear to be very effective in the isolation of a variety of otherwise unstable main group and transition metal diamagnetic and paramagnetic species. This is due to their low-lying LUMO and the small singlet-triplet gap. These electronic properties also allow free CAACs to activate small molecules with strong bonds. They also bind strongly to transition metal centers, which enables their use under harsh conditions. One recent development is the use of CAACs as ligands in transition metal complexes, which previously were only postulated as short-lived catalytic intermediates.[292,345] The availability of these reactive species allows for a better understanding of known catalytic reactions and the design of new catalysts and, moreover, new applications. For example Radius et al.[320] prepared a CAAC complex of cobalt as a precursor for thin-film deposition and Steffen et al.[346] reported a CAAC complex of copper with very high photoluminescent properties, which could be used in LED devices. With the development of cheap and facile synthetic methods for the preparation of CAACs and their corresponding transition metals complexes, as well as the knowledge of their electronic properties, it is safe to predict that applications in and around this field of chemistry will continue to increase.
Ein wesentliches Ziel dieser Arbeit war die Durchführung von regioselektiven Deborierungsreaktionen von 1,7-Dicarba-closo-dodecaboranen sowie die Herstellung von polyfunktionalisierten meta-Carboran-Derivaten. Die synthetisierten {nido-7,9-C2B9}- und {closo-1,7-C2B10}-Derivate und ausgewählte ortho-Carboran-Derivate wurden nach erfolgter Kumada-artiger Kreuzkupplungsreaktion bzgl. ihrer Koordinationschemie untersucht. Die ethinylfunktionalisierten Borcluster wurden als Edukte für die Herstellung von Gold(I)-Komplexen genutzt. Weitere Ziele dieser Arbeit waren außerdem die Synthese und umfassende Charakterisierung des gemischten Fluorohydridoborat-Anions [BHF3]− und der carboranylsubstituierten Borat-Anionen [1-HF2B-closo-1,2-C2B10H11]− und [1-HF2B-9,12-I2-closo-1,2-C2B10H9]− sowie die Untersuchung hinsichtlich ihrer Folgechemie.
In dieser Dissertation werden die Ergebnisse zur Synthese und Polymerisation gespannter Manganoarenophane vorgestellt. Weiterhin wird die Reaktivität von Bis(benzol)titan und die Synthese von ansa-Verbindungen dieses Komplexes, sowie Untersuchungen zu deren Eigenschaften beschrieben. Zum Vergeleich wird auch der Komplex Bis(mesityl)titan untersucht. Die Polymerisation von zinnverbrückten, gespannten Vanadium-Sandwichkomplexen und die Untersuchungen der paramagnetischen Eigenschaften ist ebenso in dieser Dissertationsschrift beschrieben. Zusätzlich wird die Synthese heteroleptischer Sandwichkomplexe des Scandiums und Yttriums dargestellt, sowie deren Ringsubstitution. Die Vorarbeiten zur Synthese heteroleptischer Sandwichkomplexe der Lanthanoide bildet ebenso einen Bestandteil dieser Schrift, wie die Synthese von ansa-Komplexen des Thorocens und Uranocens via flytrap-Methode.
Im Fokus der Dissertation stand die Synthese von Vorstufen (Imidazoliumsalze) für NHC-Liganden sowie die Umsetzung dieser Verbindungen zu N-heterocyclischen Carbenen unter Verwendung des Carba-closo-dodecaborat-Anions. Hierbei wurde der Cluster über die Position B12 oder B7 an das Stickstoffatome des Imidazols gebunden. Zur Synthese wurden unterschiedliche Routen ausgehend von \(Cs[12-I-closo-1-CB_{11}H_{11}]\) und \(12-PhI-closo-1-CB_{11}H_{11}\) sowie den entsprechenden 7-Isomeren untersucht und miteinander verglichen. Die isomerenreinen Synthesen wurden hinsichtlich ihrer Vor- und Nachteile untersucht und so optimiert. Es wurden sowohl unsymmetrische Imidazoliumsalze mit dem Carba-closo-dodecaborat-Anion auf der einen Seite und Alkyl- oder Arylreste (Butyl, Methyl, Phenyl, p-Methoxyphenyl, p-Fluorphenyl-, Vinyl-, Benzyl- und Mesitylsubstituenten) als auch die symmetrische Variante mit zwei Carboranylcluster synthetisiert. Besonders hervorzuheben ist hierbei, dass die Synthese des Bis(1,3-Carboran-12-yl)imidazolatanions in einer Buchwald-Hartwig-Kreuzkupplungsreaktion durch Umsetzung der Reagenzien \(Cs[12-I-closo-1-CB_{11}H_{11}]\) und \(Cs[12-Imidazolyl-closo-1-CB_{11}H_{11}]\) durch 1 zu 1 Umsetzung miteinander reagiert haben. In den meisten bisher literaturbekannten und im Rahmen der Doktorarbeit untersuchten Buchwald-Hartwig-Kreuzkupplungsreaktionen sind 4-14 Äquivalente des Amins notwendig. Darüberhinaus erfordert das Amin häufig eine Aktivierung durch Umsetzung zu Lithiumorganylen. Dies war bei der Umsetzung von \(Cs[12-I-closo-1-CB_{11}H_{11}]\) mit \(Cs[12-Imidazolyl-closo-1-CB_{11}H_{11}] \) nicht notwendig und zeigt den starken elektronenschiebenden Effekt des Clusters auf. Die unsymmetrischen Imidazoliumsalze konnten durch Umsetzung mit n-Butyllithium zu C2-NHC-Derivate umgesetzt werden. Bei der Umsetzung des Bis(1,3-Carboran-12-yl)imidazolatanions bildete sich zunächst ein Gemisch aus dem C2- und C5-Isomer, des Weiteren ist anteilig auch die Deprotonierung am Clusterkohlenstoffatom aufgetreten.