Refine
Has Fulltext
- yes (14)
Is part of the Bibliography
- yes (14)
Document Type
- Doctoral Thesis (14)
Keywords
- Fluoreszenzmikroskopie (14) (remove)
Single-molecule fluorescence microscopy in live \(Trypanosoma\) \(brucei\) and model membranes
(2018)
The eukaryotic parasite Trypanosoma brucei has evolved sophisticated strategies to escape
the host immune response and maintain a persistent infection inside a host. One central
feature of the parasite’s defense mechanism relies on the shielding function of their surface
protein coat. This coat is composed of a dense arrangement of one type of glycosylphosphatidylinositol
(GPI)-anchored variant surface glycoproteins (VSGs) which impair the
identification of epitopes of invariant surface proteins by the immune system. In addition
to the importance of understanding the function of the VSG coat and use it as a potential
target to efficiently fight the parasite, it is also crucial to study its biophysical properties as it is not yet understood sufficiently. This is due to the fact that microscopic investigations
on living trypanosomes are limited to a great extent by the intrinsic motility of the parasite.
In the present study, state-of-the-art single-molecule fluorescence microscopy (SMFM)
is introduced as a tool for biophysical investigations in the field of trypanosome research.
The work encompasses studies of VSG dynamics under the defined conditions of an
artificial supported lipid bilayer (SLB). First, the impact of the lateral protein density on
VSG diffusion was systematically studied in SLBs. Ensemble fluorescence after photobleaching
(FRAP) and complementary single-particle tracking experiments revealed that a
molecular crowding threshold (MCT) exists, above which a density dependent decrease
of the diffusion coefficient is measured. A relative quantification of reconstituted VSGs
illustrated that the VSG coat of living trypanosomes operates very close to its MCT and
is optimized for high density while maintaining fluidity. Second, the impact of VSG
N-glycosylation on VSG diffusion was quantitatively investigated. N-glycosylation was
shown to contribute to preserving protein mobility at high protein concentrations. Third,
a detailed analysis of VSG trajectories revealed that two distinct populations of freely
diffusing VSGs were present in a SLB, which is in agreement with the recent finding, that
VSGs are able to adopt two main structurally distinct conformations. The results from
SLBs were further complemented by single-particle tracking experiments of surface VSGs
on living trypanosomes. A high mobility and free diffusion were measured on the cell
surface, illustrating the overall dynamic nature of the VSG coat. It was concluded that
the VSG coat on living trypanosomes is a protective structure that combines density and
mobility, which is supported by the conformational flexibility of VSGs. These features are
elementary for the persistence of a stable infection in the host.
Different hydrogel embedding methods are presented, that facilitated SMFM in immobilized,
living trypanosomes. The hydrogels were found to be highly cytocompatible for one
hour after cross-linking. They exhibited low autofluorescence properties in the spectral
range of the investigations, making them suitable for super-resolution microscopy (SRM).
Exemplary SRM on living trypanosomes illustrated that the hydrogels efficiently immobilized
the cells on the nanometer lever. Furthermore, the plasma membrane organization was studied in living trypanosomes. A statistical analysis of a tracer molecule inside the
inner leaflet of the plasma membrane revealed that specific membrane domains exist, in
which the tracer appeared accumulated or diluted. It was suggested that this distribution
was caused by the interaction with proteins of the underlying cytoskeleton.
In conclusion, SMFM has been successfully introduced as a tool in the field of trypanosome
research. Measurements in model membranes facilitated systematic studies of VSG dynamics
on the single-molecule level. The implementation of hydrogel immobilization
allowed for the study of static structures and dynamic processes with high spatial and
temporal resolution in living, embedded trypanosomes for the first time.
The interaction of synaptic proteins orchestrate the function of one of the most complex organs, the brain. The multitude of molecular elements influencing neurological correlations makes imaging processes complicated since conventional fluorescence microscopy methods are unable to resolve structures beyond the diffraction-limit.
The implementation of super-resolution fluorescence microscopy into the field of neuroscience allows the visualisation of the fine details of neural connectivity. The key element of my thesis is the super-resolution technique dSTORM (direct Stochastic Optical Reconstruction Microscopy) and its optimisation as a multi-colour approach. Capturing more than one target, I aim to unravel the distribution of synaptic proteins with nanometer precision and set them into a structural and quantitative context with one another. Therefore dSTORM specific protocols are optimized to serve the peculiarities of particular neural samples.
In one project the brain derived neurotrophic factor (BDNF) is investigated in primary, hippocampal neurons. With a precision beyond 15 nm, preand post-synaptic sites can be identified by staining the active zone proteins bassoon and homer. As a result, hallmarks of mature synapses can be exhibited. The single molecule sensitivity of dSTORM enables the measurement of endogenous BDNF and locates BDNF granules aligned with glutamatergic pre-synapses. This data proofs that hippocampal neurons are capable of enriching BDNF within the mature glutamatergic pre-synapse, possibly influencing synaptic plasticity.
The distribution of the metabotropic glutamate receptor mGlu4 is investigated in physiological brain slices enabling the analysis of the receptor in its natural environment. With dual-colour dSTORM, the spatial arrangement of the mGlu4 receptor in the pre-synaptic sites of parallel fibres in the molecular layer of the mouse cerebellum is visualized, as well as a four to six-fold increase in the density of the receptor in the active zone compared to the nearby environment. Prior functional measurements show that metabotropic glutamate receptors influence voltage-gated calcium channels and proteins that are involved in synaptic vesicle priming. Corresponding dSTORM data indeed suggests that a subset of the mGlu4 receptor is correlated with the voltage-gated calcium channel Cav2.1 on distances around 60 nm.
These results are based on the improvement of the direct analysis of localisation data. Tools like coordinated based correlation analysis and nearest neighbour analysis of clusters centroids are used complementary to map protein connections of the synapse. Limits and possible improvements of these tools are discussed to foster the quantitative analysis of single molecule localisation microscopy data.
Performing super-resolution microscopy on complex samples like brain slices benefits from a maximised field of view in combination with the visualisation of more than two targets to set the protein of interest in a cellular context. This challenge served as a motivation to establish a workflow for correlated structured illumination microscopy (SIM) and dSTORM. The development of the visualisation software coSIdSTORM promotes the combination of these powerful super-resolution techniques even on separated setups. As an example, synapses in the cerebellum that are affiliated to the parallel fibres and the dendrites of the Purkinje cells are identified by SIM and the protein bassoon of those pre-synapses is visualised threedimensionally with nanoscopic precision by dSTORM.
In this work I placed emphasis on the improvement of multi-colour super-resolution imaging and its analysing tools to enable the investigation of synaptic proteins. The unravelling of the structural arrangement of investigated proteins supports the building of a synapse model and therefore helps to understand the relation between structure and function in neural transmission processes.
Methoden der Fluoreszenz-Lokalisationsmikroskopie (engl. single-molecule localization microscopy, SMLM) ermöglichen es Moleküle zu quantifizieren und deren Verteilung zu analysieren. Im Rahmen dieser Arbeit wurden verschiedene Membranmoleküle auf unterschiedlichen eukaryotischen Zellen, aber auch auf Prokaryoten mit dSTORM (engl. direct stochastic optical reconstruction microscopy) oder PALM (engl.: photoactivated localization microscopy) aufgenommen und quantifiziert. Bevor jedoch diese hochauflösende fluoreszenzbasierte Technik für biologische Fragestellungen angewendet werden konnten, mussten zunächst potentielle Artefakt-auslösende Quellen identifiziert und Strategien gefunden werden, um diese zu eliminieren.
Eine mögliche Artefakt-Quelle ist eine zu niedrige Photonenzahl, die von Fluorophoren emittiert wird. Werden zu wenige Photonen detektiert, kann die Lokalisation eines Fluorophors weniger präzise bestimmt werden. Dies kann zu einer falschen Abbildung von Strukturen führen oder zu falschen Rückschlüssen über die Verteilung von Molekülen. Eine Möglichkeit die Anzahl der emittierten Photonen zu erhöhen, ist chemische Additive als Triplettlöscher einzusetzen. Sie bewirken, dass die Fluorophore wieder in den Grundzustand relaxieren und somit wieder angeregt werden können. Es wurden verschiedene Additive, die in der Literatur als Triplettlöscher beschrieben sind, getestet. Dazu wurden zunächst ihre Auswirkungen auf den Triplettzustand verschiedener Fluorophore (Alexa Fluor (Al) 488, 532 und 647 und Atto655) mit Hilfe von Fluoreszenzkorrelationsspektroskopie (FCS) untersucht. Cyclooctatetraen (COT) bewirkte dabei eine Abnahme der Triplettausbeute von Al488, Al532 und Al647 um ~ 40-60%, bei Atto655 veränderte sie sich nicht. Obwohl die Ergebnisse der FCS-Messungen darauf hindeuten, dass COT in einer erhöhten Anzahl an emittierten Photonen resultiert, konnte dies bei dSTORM-Messungen nicht bestätigt werden. Hier hatte COT nur einen größeren positiven Effekt auf das Fluorophor Al647 (Zunahme um ~ 60%). Eine Erklärung für diese Widersprüchlichkeit zu den Ergebnissen aus den FCS-Messungen, könnte das Vorhandensein des Schaltpuffers bei dSTORM-Messungen sein. Dieser bewirkt den Übergang der Fluorophore in den Aus-Zustand bzw. entzieht dem Puffer Sauerstoff.
Bei der Zugabe von 5 mM Kaliumiodid (KI) nahm die Triplettamplitude bei FCS-Messungen nur bei Al488 ab (um ~ 80%). Eine geringe Steigerung (um ~ 10%) der Intensität von Al488 mit KI konnte bei dSTORM-Messungen mit niedrigen Konzentrationen (~ 0,5 mM) erzielt werden. Bei einer Konzentration von 5 mM sank die Intensität jedoch wieder um 40%.
Deuteriumoxid (D2O) soll, anders als die Triplettlöscher, eine Verbesserung der Photonenausbeute dadurch bewirken, dass strahlungslose Relaxationsprozesse minimiert werden. Mit dSTORM-Messungen konnte gezeigt werden, dass Atto655 und Al647 in D2O zwar pro An-Zustand mehr Photonen emittieren als in Schaltpuffer ohne D2O, da die Fluorophore hier jedoch schneller bleichen, letztendlich die gleiche Anzahl an Photonen detektiert werden.
Um die Anzahl an emittierten Photonen zu erhöhen, eignet sich also nur COT bei dSTORM-Messungen mit AL647 und KI in sehr geringen Konzentrationen bei Al488. D2O kann eingesetzt werden, wenn eine Probe schnell vermessen werden muss, wie zum Beispiel bei Lebendzellmessungen.
Nicht nur eine zu niedrige Photonenzahl, auch eine zu geringe Photoschaltrate kann Artefakte bei dSTORM-Messungen erzeugen. Dies wurde anhand von verschiedenen biologischen Strukturen, die mit unterschiedlichen Anregungsintensitäten aufgenommen wurden, deutlich gemacht. Besonders die Aufnahmen von Plasmamembranen sind anfällig für die Generierung von Artefakten. Sie weisen viele inhomogene und lokal dichte Regionen auf. Wenn nun mehr als ein Emitter pro µm² gleichzeitig an ist, erzeugt das Auswertungsprogramm große artifizielle Cluster. Die hier durchgeführten Messungen machen deutlich, wie wichtig es ist, dSTORM-Bilder immer auf mögliche Artefakte hin zu untersuchen, besonders wenn Moleküle quantifiziert werden sollen. Dafür müssen die unbearbeiteten Rohdaten sorgfältig gesichtet werden und notfalls die Messungen mit einer höheren Laserleistung wiederholt werden. Da dSTORM mittlerweile immer mehr zur Quantifizierung eingesetzt wird und Clusteranalysen durchgeführt werden, wäre es sinnvoll bei Veröffentlichungen die Rohdaten von entscheidenden Aufnahmen der Öffentlichkeit zur Verfügung zu stellen.
Die Färbemethode ist ein weiterer Punkt, durch den Artefakte bei der Abbildung von Molekülen mittels SMLM entstehen können. Häufig werden Antikörper zum Markieren verwendet. Dabei sollte darauf geachtet werden, dass möglichst kleine Antikörper oder Antikörperfragmente verwendet werden, besonders wenn Clusteranalysen durchgeführt werden sollen. Anderenfalls leidet die Auflösung darunter, bzw. erhöht sich die Gefahr der Kreuzvernetzung von Molekülen.
Im zweiten Teil der vorliegenden Arbeit, wurden Plasmamembran-Ceramide untersucht. Ceramide gehören zu den Sphingolipiden und regulieren diverse zelluläre Prozesse. Verschiedene Stimuli bewirken eine Aktivierung von Sphingomyelinasen (SMasen), die Ceramide in der Plasmamembran synthetisieren. Steigt die Konzentration von Ceramiden in der Plasmamembran an, kondensieren diese zu Ceramid-reichen Plattformen (CRPs). Bisher ist noch wenig über die Verteilung der Ceramide und die Größe der CRPs bekannt. Sie wurden hier über IgG-Antikörper in der Plasmamembran von Jurkat-, U2OS-, HBME- und primären T-Zellen angefärbt und erstmals mit dSTORM hochaufgelöst, um sie dann zu quantifizieren. Unabhängig von der Zelllinie befanden sich 50% aller Ceramidmoleküle in ~ 75 nm großen CRPs. Im Mittel bestanden die CRPs aus ~ 20 Ceramiden. Mit Hilfe einer Titrationsreihe konnte ausgeschlossen werden, dass diese Cluster nur durch die Antikörper-Färbung artifiziell erzeugt wurden. Bei Inkubation der Zellen mit Bacillus cereus Sphingomyelinase (bSMase) stieg die Gesamtkonzentration der Ceramide in der Plasmamembran an, ebenso wie die Ceramidanzahl innerhalb der CRPs, außerdem die Anzahl und Größe der CRPs. Dies könnte zu einer Veränderung der Löslichkeit von Membrankomponenten führen, was wiederum eine Akkumulation bestimmter Rezeptoren oder eine Kompartimentierung bestimmter Proteine erleichtern könnte. Die Anhäufung der Ceramide in den CRPs könnte ebenfalls die lokale Interaktion mit anderen Membranmolekülen erleichtern und dadurch möglicherweise die Reaktivität von Rezeptoren verändern.
Mittels Azid-modifizierten Ceramidanaloga und kupferfreier Click-Chemie wurden Plasmamembran-Ceramide auch in lebenden Jurkat-Zellen mit Hilfe konfokaler Laser-Raster-Mikroskopie (CLSM, engl. confocal laser scanning microscopy) und Strukturierter Beleuchtungsmikroskopie (SIM, engl. structured illumination microscopy) untersucht. Dabei konnte gezeigt werden, dass die Fettsäure-Kettenlänge und die Position des Azids bei den Ceramidanaloga eine entscheidende Rolle spielt, wie hoch das detektierte Signal in der Plasmamembran letztendlich ist. Die Versuche machen auch deutlich, dass die klickbaren Ceramidanaloga lebendzellkompatibel sind, sodass sie eine hervorragende Möglichkeit darstellen, zelluläre Reaktionen zu verfolgen.
Es wurden hier nicht nur Ceramide in eukaryotischen Zellen analysiert, sondern auch in Bakterien. Neisseria meningitidis (N. meningitidis) sind gramnegative Bakterien, die im Menschen eine Sepsis oder eine Meningitis auslösen können. Es wurde mittels immunhistochemischen Färbungen mit dem anti-Ceramid IgG-Antikörper, aber auch mit den klickbaren Ceramidanaloga, ein Signal in der Membran erhalten, was mit dSTORM hochaufgelöst wurde. In anderen Bakterien wurden ebenfalls schon Sphingolipide nachgewiesen. Studien zu Ceramiden in N. meningitidis wurden bisher jedoch noch nicht veröffentlicht. Im Rahmen dieser Arbeit konnten erstmals Ergebnisse erhalten werden, die darauf hinweisen, dass N. meningitidis ebenfalls Ceramide besitzen könnten.
In einem dritten Projekt wurde die Interaktion zwischen NK-Zellen und Aspergillus fumigatus untersucht. Der Schimmelpilz kann eine Invasive Aspergillose in immunsupprimierten Menschen auslösen, was zum Tod führen kann. Verschiedene Studien konnten schon zeigen, dass NK-Zellen eine wichtige Rolle bei der Bekämpfung des Pilzes spielen. Der genaue Mechanismus ist jedoch noch unbekannt. Im Rahmen dieser Arbeit konnte nachgewiesen werden, dass der NK-Zell-Marker CD56 entscheidend für die Pilzerkennung ist. Mit immunhistochemischen Färbungen und LSM-, aber auch dSTORM-Messungen, konnte gezeigt werden, dass die normalerweise homogen verteilten CD56-Rezeptoren auf der Plasmamembran von NK-Zellen aktiv an die Interaktionsstelle zu A. fumigatus transportiert werden. Mit der Zeit akkumulieren hier immer mehr CD56-Proteine, während das Signal in der restlichen Membran immer weiter abnimmt. Es konnte erstmals CD56 als wichtiger Erkennungsrezeptor für A. fumigatus identifiziert werden.
In dem letzten bearbeiteten Projekt, wurde die Bindung von Anti-N-Methyl-D-Aspartat (NMDA)-Rezeptor Enzephalitis Autoantikörper an Neuronen untersucht. Bei einer Anti-NMDA-Rezeptor Enzephalitis bilden die Patienten Autoantikörper gegen die NR1-Untereinheit ihrer eigenen postsynaptischen NMDA-Rezeptoren. Da die Krankheit oft sehr spät erkannt wird und die Behandlungsmöglichkeiten noch sehr eingeschränkt sind, führt sie noch oft zum Tod. Sie wurde erst vor wenigen Jahren beschrieben, sodass der genaue Mechanismus noch unbekannt ist. Im Rahmen dieser Arbeit, konnten erste Färbungen mit aufgereinigten Antikörper aus Anti-NMDA-Rezeptor Enzephalitis Patienten an NMDA-Rezeptor-transfizierte HEK-Zellen und hippocampalen Maus-Neuronen durchgeführt und mit dSTORM hochaufgelöst werden. Mit den Messungen der HEK-Zellen konnte bestätigt werden, dass die Autoantikörper an die NR1-Untereinheit der Rezeptoren binden. Es konnten erstmals auch die Bindung der Antikörper an Neuronen hochaufgelöst werden. Dabei wurde sichtbar, dass die Antikörper zum einen dicht gepackt in den Synapsen vorliegen, aber auch dünner verteilt in den extrasynaptischen Regionen. Basierend auf der Ripley’s H-Funktion konnten in den Synapsen große Cluster von ~ 90 nm Durchmesser und im Mittel ~ 500 Lokalisationen und extrasynaptisch kleinere Cluster mit einem durchschnittlichen Durchmesser von ~ 70 nm und ~ 100 Lokalisationen ausgemacht werden. Diese ersten Ergebnisse legen den Grundstein für weitere Messungen, mit denen der Mechanismus der Krankheit untersucht werden kann.
The plasma membrane is one of the most thoroughly studied and at the same time most complex, diverse, and least understood cellular structures. Its function is determined by the molecular composition as well as the spatial arrangement of its components. Even after decades of extensive membrane research and the proposal of dozens of models and theories, the structural organization of plasma membranes remains largely unknown. Modern imaging tools such as super-resolution fluorescence microscopy are one of the most efficient techniques in life sciences and are widely used to study the spatial arrangement and quantitative behavior of biomolecules in fixed and living cells. In this work, direct stochastic optical reconstruction microscopy (dSTORM) was used to investigate the structural distribution of mem-brane components with virtually molecular resolution. Key issues are different preparation and staining strategies for membrane imaging as well as localization-based quantitative analyses of membrane molecules.
An essential precondition for the spatial and quantitative analysis of membrane components is the prevention of photoswitching artifacts in reconstructed localization microscopy images. Therefore, the impact of irradiation intensity, label density and photoswitching behavior on the distribution of plasma membrane and mitochondrial membrane proteins in dSTORM images was investigated. It is demonstrated that the combination of densely labeled plasma membranes and inappropriate photoswitching rates induces artificial membrane clusters. Moreover, inhomogeneous localization distributions induced by projections of three-dimensional membrane structures such as microvilli and vesicles are prone to generate artifacts in images of biological membranes. Alternative imaging techniques and ways to prevent artifacts in single-molecule localization microscopy are presented and extensively discussed.
Another central topic addresses the spatial organization of glycosylated components covering the cell membrane. It is shown that a bioorthogonal chemical reporter system consisting of modified monosaccharide precursors and organic fluorophores can be used for specific labeling of membrane-associated glycoproteins and –lipids. The distribution of glycans was visualized by dSTORM showing a homogeneous molecule distribution on different mammalian cell lines without the presence of clusters. An absolute number of around five million glycans per cell was estimated and the results show that the combination of metabolic labeling, click chemistry, and single-molecule localization microscopy can be efficiently used to study cell surface glycoconjugates.
In a third project, dSTORM was performed to investigate low-expressing receptors on cancer cells which can act as targets in personalized immunotherapy. Primary multiple myeloma cells derived from the bone marrow of several patients were analyzed for CD19 expression as potential target for chimeric antigen receptor (CAR)-modified T cells. Depending on the patient, 60–1,600 CD19 molecules per cell were quantified and functional in vitro tests demonstrate that the threshold for CD19 CAR T recognition is below 100 CD19 molecules per target cell. Results are compared with flow cytometry data, and the important roles of efficient labeling and appropriate control experiments are discussed.
The resolution of fluorescence light microscopy was long believed to be limited by the diffraction limit of light of around 200-250 nm described in 1873 by Ernst Abbe. Within the last decade, several approaches, such as structured illumination microscopy (SIM), stimulated emission depletion STED and (direct) stochastic optical reconstruction microscopy (d)STORM have been established to bypass the diffraction limit. However, such super-resolution techniques enabling a resolution <100 nm require specialized and expensive setups as well as expert knowledge in order to avoid artifacts. They are therefore limited to specialized laboratories. Recently, Boyden and colleagues introduced an alternate approach, termed expansion microscopy (ExM). The latter offers the possibility to perform superresolution microscopy on conventional confocal microscopes by embedding the sample into a swellable hydrogel that is isotropically expanded. Since its introduction in 2015, expansion microscopy has developed rapidly offering protocols for 4x, 10x and 20x expansion of proteins and RNA in cells, tissues and human clinical specimens.
Mitochondria are double membrane-bound organelles and crucial to the cell by performing numerous tasks, from ATP production through oxidative phosphorylation, production of many important metabolites, cell signaling to the regulation of apoptosis. The inner mitochondrial membrane is strongly folded forming so-called cristae. Besides being the location of the oxidative phosphorylation and therefore energy conversion and ATP production, cristae have been of great interest because changes in morphology have been linked to a plethora of diseases from cancer, diabetes, neurodegenerative diseases, to aging and infection. However, cristae imaging remains challenging as the distance between two individual cristae is often below 100 nm. Within this work, we demonstrate that the mitochondrial creatine kinase MtCK linked to fluorescent protein GFP (MtCK-GFP) can be used as a cristae marker. Upon fourfold expansion, we illustrate that our novel marker enables visualization of cristae morphology and localization of mitochondrial proteins relative to cristae without the need for specialized setups. Furthermore, we show the applicability of expansion microscopy for several bacterial pathogens, such as Chlamydia trachomatis, Simkania negevensis, Neisseria gonorrhoeae and Staphylococcus aureus. Due to differences in bacterial cell walls, we reveal important aspects for the digestion of pathogens for isotropic expansion. We further show that expansion of the intracellular pathogens C. trachomatis and S. negevensis, enables the differentiation between the two distinct developmental forms, catabolic active reticulate bodies (RB) and infectious elementary bodies (EB), on a conventional confocal microscope. We demonstrate the possibility to precisely locate chlamydial effector proteins, such as CPAF or Cdu1, within and outside the chlamydial inclusion. Moreover, we show that expansion microscopy enables the investigation of bacteria, herein S. aureus, within LAMP1 and LC3-II vesicles. With the introduction of the unnatural α-NH2-ω-N3-C6-ceramide, we further present the first approach for the expansion of lipids that may also be suitable for far inaccessible molecule classes like carbohydrates. The efficient accumulation and high labeling density of our functionalized α-NH2-ω-N3-C6-ceramide in both cells and bacteria enables in combination with tenfold expansion nanoscale resolution (10-20 nm) of the interaction of proteins with the plasma membrane, membrane of organelles and bacteria. Ceramide is the central molecule of the sphingolipid metabolism, an important constituent of cellular membranes and regulates many important cellular processes such as differentiation, proliferation and apoptosis. Many studies report about the importance of sphingolipids during infection of various pathogens. While the transport of ceramide to Chlamydia has been reported earlier, one of the unanswered questions remaining was if ceramide forms parts of the outer or inner bacterial membrane. Expansion of α-NH2-ω-N3-C6-ceramide enabled the visualization of ceramide in the inner and outer membrane of C. trachomatis and their distance was determined to be 27.6 ± 7.7 nm.
Localization microscopy is a class of super-resolution fluorescence microscopy techniques. Localization microscopy methods are characterized by stochastic temporal isolation of fluorophore emission, i.e., making the fluorophores blink so rapidly that no two are
likely to be photoactive at the same time close to each other. Well-known localization microscopy methods include dSTORM}, STORM, PALM, FPALM, or GSDIM. The biological community has taken great interest in localization microscopy, since it can enhance the resolution of common fluorescence microscopy by an order of magnitude at little experimental cost.
However, localization microscopy has considerable computational cost since millions of individual stochastic emissions must be located with nanometer precision. The computational cost of this evaluation, and the organizational cost of implementing the complex algorithms, has impeded adoption of super-resolution microscopy for a long time.
In this work, I describe my algorithmic framework for evaluating localization microscopy data.
I demonstrate how my novel open-source software achieves real-time data evaluation, i.e., can evaluate data faster than the common experimental setups can capture them.
I show how this speed is attained on standard consumer-grade CPUs, removing the need for computing on expensive clusters or deploying graphics processing units.
The evaluation is performed with the widely accepted Gaussian PSF model and a Poissonian maximum-likelihood noise model.
I extend the computational model to show how robust, optimal two-color evaluation is realized, allowing correlative microscopy between multiple proteins or structures. By employing cubic B-splines, I show how the evaluation of three-dimensional samples can be made simple and robust, taking an important step towards precise imaging of micrometer-thick samples.
I uncover the behavior and limits of localization algorithms in the face of increasing emission densities.
Finally, I show up algorithms to extend localization microscopy to common biological problems.
I investigate cellular movement and motility by considering the in vitro movement of myosin-actin filaments. I show how SNAP-tag fusion proteins enable imaging with bright and stable organic fluorophores in live cells. By analyzing the internal structure of protein clusters, I show how localization microscopy can provide new quantitative approaches beyond pure imaging.
Die Lokalisationsmikroskopie ist eine neue, vielversprechende Methode der hochauflösenden Fluoreszenzmikroskopie. Sie ermöglicht detaillierte Einblicke in die Organisation und den strukturellen Aufbau von Zellen. Da die Vorbereitung der Proben und das Aufnehmen der Bilder im Vergleich zu herkömmlichen Methoden höhere Anforderungen stellt, mussten ihr Potential und ihre Zuverlässigkeit erst noch überzeugend gezeigt werden. Bis vor kurzem wurde das Auflösungsvermögen vor allem an Mikrotubuli gezeigt, deren filamentöse Struktur allerdings schon in konfokalen Bildern zu erkennen ist. Deswegen wurde in dieser Dissertation der Kernporenkomplex (NPC), dessen Struktur in der konventionellen Fluoreszenzmikroskopie nicht auflösbar ist, als Modellstruktur für die hochauflösende Fluoreszenzmikroskopie eingeführt.
Dazu wurden Kernporenkomplexe aus Kernhüllen von Xenopus laevis Oocyten mit dSTORM (direct stochastic optical reconstruction microscopy), einer Methode der Lokalisationsmikroskopie, hochaufgelöst. Damit konnte nun erstmals die Achtfachsymmetrie dieses Proteinkomplexes lichtmikroskopisch dargestellt werden. Desweiteren konnte der Zentralkanal mit einem Durchmesser von ca. 40 nm aufgelöst werden. Die Daten eigneten sich außerdem für eine automatisierte Bildanalyse nach dem sogenannten "particle averaging" - einer aus der Elektronenmikroskopie bekannten Methode, um eine Durchschnittsstruktur zu ermitteln.
Darüber hinaus wurden Zweifach-Färbungen von NPCs benutzt, um verschiedene Ansätze für Zweifarben-Aufnahmen mit dSTORM zu testen. Neben dem mittlerweile standardmäßig benutzten, sequentiellen Ansatz mit zwei spektral getrennten Farbstoffen, wurde auch ein simultaner Ansatz mit zwei spektral überlappenden Farbstoffen erfolgreich angewandt. Auch für 3D-Messungen mit den Ansätzen Biplane und Astigmatismus eignete sich die Markierung der Kernhülle. Hier wurden jedoch A6-Zellen benutzt und die Krümmung des Zellkerns über die gefärbten Kernporen dargestellt.
dSTORM-Messungen können nicht nur an fixierten, sondern auch in lebenden Zellen durchgeführt werden. Hierzu eignen sich vor allem sehr immobile Proteine, wie H2B oder Lamin C. Anhand von SNAP-Tag- und Halo-Tag-Konstrukten konnte gezeigt werden, dass sich kommerziell erhältliche, organische Farbstoffe auch in endogener zellulärer Umgebung schalten lassen, wodurch Lebendzell-Aufnahmen mit dSTORM möglich sind.
Ein weiterer Teil dieser Arbeit befasst sich mit korrelativen Aufnahmen aus dSTORM und Rasterelektronenmikroskopie (SEM). Hierzu wurden Xenopus laevis Kernhüllen zuerst mit dSTORM hochaufgelöst und danach für die EM präpariert. Anschließend wurden zugehörige Bereiche am Rasterelektronenmikroskop aufgenommen. Mit den erhaltenen korrelativen Bildern konnte gezeigt werden, dass sich dSTORM und SEM bei geeigneten Proben durchaus kombinieren lassen. Proteine können somit spezifisch markiert und im Rahmen ihrer strukturellen Umgebung mit nahezu molekularer Auflösung dargestellt werden.
Da hochwertige Aufnahmen eine ausgereifte Probenpräparation voraussetzen, darf deren Etablierung nicht zu kurz kommen. Unter dieser Prämisse wurde ein optimiertes Markierungsprotokoll mit dem Namen ClickOx entwickelt. Mit ClickOx bleibt bei der kupferkatalysierten Azid-Alkin-Cycloaddition die Feinstruktur von Aktinfilamenten, sowie die Fluoreszenz fluoreszierender Proteine, deutlich sichtbar erhalten. Während bei den klassischen Click-Protokollen auf Grund der Entstehung von reaktiven Sauerstoff-Spezies (ROS) feine zelluläre Strukturen, wie Aktinfilamente, angegriffen oder zerstört werden, schützt das neue Protokoll mit enzymatischem Sauerstoffentzug Proteine und somit Strukturen vor Reaktionen mit ROS. Das unterstreicht, wie wichtig es ist auch sogenannte "etablierte" Protokolle weiterzuentwickeln, denn bestimmte Nebeneffekte in Präparationen werden unter Umständen erstmals in der Hochauflösung sichtbar.
Ein weiterer Aspekt war die Untersuchung des Einflusses von D1 auf die Chromatinorganisation. Mit verschiedenen mikroskopischen Methoden konnten Hinweise auf eine mögliche DNA-Cross-Linking-Fähigkeit dieses Proteins gesammelt werden. Hier wurde die Einzelmolekülinformation der dSTORM-Filme genutzt, um unterschiedliche Grade von DNA- bzw. Chromatin-Akkumulation zu vergleichen. Die Ergebnisse deuten darauf hin, dass wildtypisches D1 DNA vernetzen kann. Dies erfolgt über die sogenannten AT-Haken-Motive. Sobald diese alle durch Mutation funktionsunfähig gemacht werden - wie bei der verwendeten R10xG-Mutante - lässt sich keine Akkumulation der DNA mehr beobachten. Neben der Chromatinaggregation durch D1-Expression konnte in FRAP-Experimenten gezeigt werden, dass nur die "echten" AT-Haken eine hohe Affinität zum Chromatin aufweisen, die sogenannten "potentiellen" hingegen nicht.
Die Fluoreszenzmikroskopie ist eine vielseitig einsetzbare Untersuchungsmethode für biologische Proben, bei der Biomoleküle selektiv mit Fluoreszenzfarbstoffen markiert werden, um sie dann mit sehr gutem Kontrast abzubilden. Dies ist auch mit mehreren verschiedenartigen Zielmolekülen gleichzeitig möglich, wobei üblicherweise verschiedene Farbstoffe eingesetzt werden, die über ihre Spektren unterschieden werden können.
Um die Anzahl gleichzeitig verwendbarer Färbungen zu maximieren, wird in dieser Arbeit zusätzlich zur spektralen Information auch das zeitliche Abklingverhalten der Fluoreszenzfarbstoffe mittels spektral aufgelöster Fluoreszenzlebensdauer-Mikroskopie (spectrally resolved fluorescence lifetime imaging microscopy, sFLIM) vermessen. Dazu wird die Probe in einem Konfokalmikroskop von drei abwechselnd gepulsten Lasern mit Wellenlängen von 485 nm, 532nm und 640nm angeregt. Die Detektion des Fluoreszenzlichtes erfolgt mit einer hohen spektralen Auflösung von 32 Kanälen und gleichzeitig mit sehr hoher zeitlicher Auflösung von einigen Picosekunden. Damit wird zu jedem detektierten Fluoreszenzphoton der Anregungslaser, der spektrale Kanal und die Ankunftszeit registriert. Diese detaillierte multidimensionale Information wird von einem Pattern-Matching-Algorithmus ausgewertet, der das Fluoreszenzsignal mit zuvor erstellten Referenzpattern der einzelnen Farbstoffe vergleicht. Der Algorithmus bestimmt so für jedes Pixel die Beiträge der einzelnen Farbstoffe.
Mit dieser Technik konnten pro Anregungslaser fünf verschiedene Färbungen gleichzeitig dargestellt werden, also theoretisch insgesamt 15 Färbungen. In der Praxis konnten mit allen drei Lasern zusammen insgesamt neun Färbungen abgebildet werden, wobei die Anzahl der Farben vor allem durch die anspruchsvolle Probenvorbereitung limitiert war. In anderen Versuchen konnte die sehr hohe Sensitivität des sFLIM-Systems genutzt werden, um verschiedene Zielmoleküle voneinander zu unterscheiden, obwohl sie alle mit demselben Farbstoff markiert waren. Dies war möglich, weil sich die Fluoreszenzeigenschaften eines Farbstoffmoleküls geringfügig in Abhängigkeit von seiner Umgebung ändern. Weiterhin konnte die sFLIM-Technik mit der hochauflösenden STED-Mikroskopie (STED: stimulated emission depletion) kombiniert werden, um so hochaufgelöste zweifarbige Bilder zu erzeugen, wobei nur ein einziger gemeinsamer STED-Laser benötigt wurde.
Die gleichzeitige Erfassung von mehreren photophysikalischen Messgrößen sowie deren Auswertung durch den Pattern-Matching-Algorithmus ermöglichten somit die Entwicklung von neuen Methoden der Fluoreszenzmikroskopie für Mehrfachfärbungen.
Sharpening super-resolution by single molecule localization microscopy in front of a tuned mirror
(2020)
The „Resolution Revolution" in fluorescence microscopy over the last decade has given rise to a variety of techniques that allow imaging beyond the diffraction limit with a resolution power down into the nanometer range. With this, the field of so-called super-resolution microscopy was born. It allows to visualize cellular architecture at a molecular level and thereby achieve a resolution level that had been previously only accessible by electron microscopy approaches.
One of these promising techniques is single molecule localization microscopy (SMLM) in its most varied forms such as direct stochastic optical reconstruction microscopy (dSTORM) which are based on the temporal separation of the emission of individual fluorophores. Localization analysis of the subsequently taken images of single emitters eventually allows to reconstruct an image containing super-resolution information down to typically 20 nm in a cellular setting. The key point here is the localization precision, which mainly depends on the image contrast generated the by the individual fluorophore’s emission. Thus, measures to enhance the signal intensity or reduce the signal background allow to increase the image resolution achieved by dSTORM. In my thesis, this is achieved by simply adding a reflective metal-dielectric nano-coating to the microscopy coverslip that serves as a tunable nano-mirror.
I have demonstrated that such metal-dielectric coatings provide higher photon yield at lower background and thus substantially improve SMLM performance by a significantly increased localization precision, and thus ultimately higher image resolution. The strength of this approach is that ─ except for the coated cover glass ─ no specialized setup is required. The biocompatible metal-dielectric nano-coatings are fabricated directly on microscopy coverslips and have a simple three-ply design permitting straightforward implementation into a conventional fluorescence microscope. The introduced improved lateral resolution with such mirror-enhanced STORM (meSTORM) not only allows to exceed Widefield and Total Internal Reflection Fluorescence (TIRF) dSTORM performance, but also offers the possibility to measure in a simplified setup as it does not require a special TIRF objective lens.
The resolution improvement achieved with meSTORM is both spectrally and spatially tunable and thus allows for dual-color approaches on the one hand, and selectively highlighting region above the cover glass on the other hand, as demonstrated here.
Beyond lateral resolution enhancement, the clear-cut profile of the highlighted region provides additional access to the axial dimension. As shown in my thesis, this allows for example to assess the three-dimensional architecture of the intracellular microtubule network by translating the local localization uncertainty to a relative axial position. Even beyond meSTORM, a wide range of membrane or surface imaging applications may benefit from the selective highlighting and fluorescence enhancing provided by the metal-dielectric nano-coatings. This includes for example, among others, live-cell Fluorescence Correlation Spectroscopy and Fluorescence Resonance Energy Transfer studies as recently demonstrated.
In the heart the β\(_1\)-adrenergic receptor (AR) and the β\(_2\)-AR, two prototypical G protein-coupled receptors (GPCRs), are both activated by the same hormones, namely adrenaline and noradrenaline. Both receptors couple to stimulatory G\(_s\) proteins, mediate an increase in cyclic adenosine monophosphate (cAMP) and influence the contractility and frequency of the heart upon stimulation. However, activation of the β\(_1\)-AR, not the β\(_2\)-AR, lead to other additional effects, such as changes in gene transcription resulting in cardiac hypertrophy, leading to speculations on how distinct effects can arise from receptors coupled to the same downstream signaling pathway.
In this thesis the question of whether this distinct behavior may originate from a differential localization of these two receptors in adult cardiomyocytes is addressed. Therefore, fluorescence spectroscopy tools are developed and implemented in order to elucidate the presence and dynamics of these endogenous receptors at the outer plasma membrane as well as on the T-tubular network of intact adult cardiomyocytes. This allows the visualization of confined localization and diffusion of the β\(_2\)-AR to the T-tubular network at endogenous expression. In contrast, the β\(_1\)-AR is found diffusing at both the outer plasma membrane and the T-tubules. Upon overexpression of the β\(_2\)-AR in adult transgenic cardiomyocytes, the receptors experience a loss of this compartmentalization and are also found at the cell surface. These data suggest that distinct signaling and functional effects can be controlled by specific cell surface targeting of the receptor subtypes.
The tools at the basis of this thesis work are a fluorescent adrenergic antagonist in combination of fluorescence fluctuation spectroscopy to monitor the localization and dynamics of the lowly expressed adrenergic receptors. Along the way to optimizing these approaches, I worked on combining widefield and confocal imaging in one setup, as well as implementing a stable autofocus mechanism using electrically tunable lenses.