Refine
Has Fulltext
- yes (5)
Is part of the Bibliography
- yes (5)
Year of publication
- 2021 (5) (remove)
Document Type
- Doctoral Thesis (5)
Keywords
- Fluoreszenzmikroskopie (3)
- Click-Chemie (2)
- Expansionsmikroskopie (2)
- Ceramide (1)
- Chlamydia trachomatis (1)
- Cyanin (1)
- Einzelmolekül-Lokalisationsmikroskopie (1)
- Einzelmolekülmikroskopie (1)
- Expansion microscopy (1)
- Farbstoff (1)
The development of cellular life on earth is coupled to the formation of lipid-based biological membranes. Although many tools to analyze their biophysical properties already exist, their variety and number is still relatively small compared to the field of protein studies. One reason for this, is their small size and complex assembly into an asymmetric tightly packed lipid bilayer showing characteristics of a two-dimensional heterogenous fluid. Since membranes are capable to form dynamic, nanoscopic domains, enriched in sphingolipids and cholesterol, their detailed investigation is limited to techniques which access information below the diffraction limit of light. In this work, I aimed to extend, optimize and compare three different labeling approaches for sphingolipids and their subsequent analysis by the single-molecule localization microscopy (SMLM) technique direct stochastic optical reconstruction microscopy (dSTORM). First, I applied classical immunofluorescence by immunoglobulin G (IgG) antibody labeling to detect and quantify sphingolipid nanodomains in the plasma membrane of eukaryotic cells. I was able to identify and characterize ceramide-rich platforms (CRPs) with a size of ~ 75nm on the basal and apical membrane of different cell lines. Next, I used click-chemistry to characterize sphingolipid analogs in living and fixed cells. By using a combination of fluorescence microscopy and anisotropy experiments, I analyzed their accessibility and configuration in the plasma membrane, respectively. Azide-modified, short fatty acid side chains, were accessible to membrane impermeable dyes and localized outside the hydrophobic membrane core. In contrast, azide moieties at the end of longer fatty acid side chains were less accessible and conjugated dyes localized deeper within the plasma membrane. By introducing photo-crosslinkable diazirine groups or chemically addressable amine groups, I developed methods to improve their immobilization required for dSTORM. Finally, I harnessed the specific binding characteristics of non-toxic shiga toxin B subunits (STxBs) and cholera toxin B subunits (CTxBs) to label and quantify glycosphingolipid nanodomains in the context of Neisseria meningitidis infection. Under pyhsiological conditions, these glycosphingolipids were distributed homogenously in the plasma membrane but upon bacterial infection CTxB detectable gangliosides accumulated around invasive Neisseria meningitidis. I was able to highlight the importance of cell cycle dependent glycosphingolipid expression for the invasion process. Blocking membrane accessible sugar headgroups by pretreatment with CTxB significantly reduced the number of invasive bacteria which confirmed the importance of gangliosides for bacterial uptake into cells. Based on my results, it can be concluded that labeling of sphingolipids should be carefully optimized depending on the research question and applied microscopy technique. In particular, I was able to develop new tools and protocols which enable the characterization of sphingolipid nanodomains by dSTORM for all three labeling approaches.
The resolution of fluorescence light microscopy was long believed to be limited by the diffraction limit of light of around 200-250 nm described in 1873 by Ernst Abbe. Within the last decade, several approaches, such as structured illumination microscopy (SIM), stimulated emission depletion STED and (direct) stochastic optical reconstruction microscopy (d)STORM have been established to bypass the diffraction limit. However, such super-resolution techniques enabling a resolution <100 nm require specialized and expensive setups as well as expert knowledge in order to avoid artifacts. They are therefore limited to specialized laboratories. Recently, Boyden and colleagues introduced an alternate approach, termed expansion microscopy (ExM). The latter offers the possibility to perform superresolution microscopy on conventional confocal microscopes by embedding the sample into a swellable hydrogel that is isotropically expanded. Since its introduction in 2015, expansion microscopy has developed rapidly offering protocols for 4x, 10x and 20x expansion of proteins and RNA in cells, tissues and human clinical specimens.
Mitochondria are double membrane-bound organelles and crucial to the cell by performing numerous tasks, from ATP production through oxidative phosphorylation, production of many important metabolites, cell signaling to the regulation of apoptosis. The inner mitochondrial membrane is strongly folded forming so-called cristae. Besides being the location of the oxidative phosphorylation and therefore energy conversion and ATP production, cristae have been of great interest because changes in morphology have been linked to a plethora of diseases from cancer, diabetes, neurodegenerative diseases, to aging and infection. However, cristae imaging remains challenging as the distance between two individual cristae is often below 100 nm. Within this work, we demonstrate that the mitochondrial creatine kinase MtCK linked to fluorescent protein GFP (MtCK-GFP) can be used as a cristae marker. Upon fourfold expansion, we illustrate that our novel marker enables visualization of cristae morphology and localization of mitochondrial proteins relative to cristae without the need for specialized setups. Furthermore, we show the applicability of expansion microscopy for several bacterial pathogens, such as Chlamydia trachomatis, Simkania negevensis, Neisseria gonorrhoeae and Staphylococcus aureus. Due to differences in bacterial cell walls, we reveal important aspects for the digestion of pathogens for isotropic expansion. We further show that expansion of the intracellular pathogens C. trachomatis and S. negevensis, enables the differentiation between the two distinct developmental forms, catabolic active reticulate bodies (RB) and infectious elementary bodies (EB), on a conventional confocal microscope. We demonstrate the possibility to precisely locate chlamydial effector proteins, such as CPAF or Cdu1, within and outside the chlamydial inclusion. Moreover, we show that expansion microscopy enables the investigation of bacteria, herein S. aureus, within LAMP1 and LC3-II vesicles. With the introduction of the unnatural α-NH2-ω-N3-C6-ceramide, we further present the first approach for the expansion of lipids that may also be suitable for far inaccessible molecule classes like carbohydrates. The efficient accumulation and high labeling density of our functionalized α-NH2-ω-N3-C6-ceramide in both cells and bacteria enables in combination with tenfold expansion nanoscale resolution (10-20 nm) of the interaction of proteins with the plasma membrane, membrane of organelles and bacteria. Ceramide is the central molecule of the sphingolipid metabolism, an important constituent of cellular membranes and regulates many important cellular processes such as differentiation, proliferation and apoptosis. Many studies report about the importance of sphingolipids during infection of various pathogens. While the transport of ceramide to Chlamydia has been reported earlier, one of the unanswered questions remaining was if ceramide forms parts of the outer or inner bacterial membrane. Expansion of α-NH2-ω-N3-C6-ceramide enabled the visualization of ceramide in the inner and outer membrane of C. trachomatis and their distance was determined to be 27.6 ± 7.7 nm.
Plasma membrane receptors are the most crucial and most commonly studied components of cells, since they not only ensure communication between the extracellular space and cells, but are also responsible for the regulation of cell cycle and cell division. The composition of the surface receptors, the so-called "Receptome", differs and is characteristic for certain cell types. Due to their significance, receptors have been important target structures for diagnostic and therapy in cancer medicine and often show aberrant expression patterns in various cancers compared to healthy cells. However, these aberrations can also be exploited and targeted by different medical approaches, as in the case of personalized immunotherapy. In addition, advances in modern fluorescence microscopy by so-called single molecule techniques allow for unprecedented sensitive visualization and quantification of molecules with an attainable spatial resolution of 10-20 nm, allowing for the detection of both stoichiometric and expression density differences.
In this work, the single molecule sensitive method dSTORM was applied to quantify the receptor composition of various cell lines as well as in primary samples obtained from patients with hematologic malignancies. The focus of this work lies on artefact free quantification, stoichiometric analyses of oligomerization states and co localization analyses of membrane receptors.
Basic requirements for the quantification of receptors are dyes with good photoswitching properties and labels that specifically mark the target structure without generating background through non-specific binding. To ensure this, antibodies with a predefined DOL (degree of labeling) were used, which are also standard in flow cytometry. First background reduction protocols were established on cell lines prior analyses in primary patient samples. Quantitative analyses showed clear expression differences between the cell lines and the patient cells, but also between individual patients.
An important component of this work is the ability to detect the oligomerization states of receptors, which enables a more accurate quantification of membrane receptor densities compared to standard flow cytometry. It also provides information about the activation of a certain receptor, for example of FLT3, a tyrosine kinase, dimerizing upon activation. For this purpose, different well-known monomers and dimers were compared to distinguish the typical localization statistics of single bound antibodies from two or more antibodies that are in proximity. Further experiments as well as co localization analyses proved that antibodies can bind to closely adjacent epitopes despite their size.
These analytical methods were subsequently applied for quantification and visualization of receptors in two clinically relevant examples. Firstly, various therapeutically relevant receptors such as CD38, BCMA and SLAMF7 for multiple myeloma, a malignant disease of plasma cells, were analyzed and quantified on patient cells. Furthermore, the influence of TP53 and KRAS mutations on receptor expression levels was investigated using the multiple myeloma cell lines OPM2 and AMO1, showing clear differences in certain receptor quantities.
Secondly, FLT3 which is a therapeutic target receptor for acute myeloid leukemia, was quantified and stoichiometrically analyzed on both cell lines and patient cells. In addition, cells that have developed resistance against midostaurin were compared with cells that still respond to this type I tyrosine-kinase-inhibitor for their FLT3 receptor expression and oligomerization state.
Fluorescence microscopy is a form of light microscopy that has developed during the 20th century and is nowadays a standard tool in Molecular and Cell biology for studying the structure and function of biological molecules. High-resolution fluorescence microscopy techniques, such as dSTORM (direct Stochastic Optical Reconstruction Microscopy) allow the visualization of cellular structures at the nanometre scale (10−9 m). This has already made it possible to decipher the composition and function of various biopolymers, such as proteins, lipids and nucleic acids, up to the three-dimensional (3D) structure of entire organelles. In practice, however, it has been shown that these imaging methods and their further developments still face great challenges in order to achieve an effective resolution below ∼ 10 nm. This is mainly due to the nature of labelling biomolecules. For the detection of molecular structures, immunostaining is often performed as a standard method. Antibodies to which fluorescent molecules are coupled, recognize and bind specifcally and with high affnity to the molecular section of the target structure, also called epitope or antigen. The fluorescent molecules serve as reporter molecules which are imaged with the use of a fluorescence microscope. However, the size of these labels with a length of about 10-15 nm in the case of immunoglobulin G (IgG) antibodies, cause a detection of the fluorescent molecules shifted to the real position of the studied antigen. In dense regions where epitopes are located close to each other, steric hindrance between antibodies can also occur and leads to an insuffcient label density. Together with the shifted detection of fluorescent molecules, these factors can limit the achievable resolution of a microscopy technique. Expansion microscopy (ExM) is a recently developed technique that achieves a resolution improvement by physical expansion of an investigated object. Therefore, biological samples such as cultured cells, tissue sections, whole organs or isolated organelles are chemically anchored into a swellable polymer. By absorbing water, this so-called superabsorber increases its own volume and pulls the covalently bound biomolecules isotropically apart. Routinely, this method achieves a magnifcation of the sample by about four times its volume. But protocol variants have already been developed that result in higher expansion factors of up to 50-fold. Since the ExM technique includes in the frst instance only the sample treatment for anchoring and magnifcation of the sample, it can be combined with various standard methods of fluorescence microscopy. In theory, the resolution of the used imaging technique improves linearly with the expansion factor of the ExM treated sample. However, an insuffcient label density and the size of the antibodies can here again impair the effective achievable resolution. The combination of ExM with high-resolution fluorescence microscopy methods represents a promising strategy to increase the resolution of light microscopy. In this thesis, I will present several ExM variants I developed which show the combination of ExM with confocal microscopy, SIM (Structured Illumination Microscopy), STED (STimulated Emission Depletion) and dSTORM. I optimized existing ExM protocols and developed different expansion strategies, which allow the combination with the respective imaging technique. Thereby, I gained new structural insights of isolated centrioles from the green algae Chlamydomonas reinhardtii by combining ExM with STED and confocal microscopy. In another project, I combined 3D-SIM imaging with ExM and investigated the molecular structure of the so-called synaptonemal complex. This structure is formed during meiosis in eukaryotic cells and contributes to the exchange of genetic material between homologous chromosomes. Especially in combination with dSTORM, the ExM method showed its high potential to overcome the limitations of modern fluorescence microscopy techniques. In this project, I expanded microtubules in mammalian cells, a polymer of the cytoskeleton as well as isolated centrioles from C. reinhardtii. By labelling after expansion of the samples, I was able to signifcantly reduce the linkage error of the label and achieve an improved label density. In future, these advantages together with the single molecule sensitivity and high resolution obtained by the dSTORM method could pave the way for achieving molecular resolution in fluorescence microscopy
Durch stetige Entwicklung der Mikroskopiemethoden in den letzten Jahrzehnten ist es nun möglich Strukturen und Abläufe in biologischen Systemen detaillierter darzustellen als mit der von Abbe entdeckten maximalen Auflösungsgrenze. Oft werden dabei Fluoreszenzmarker benutzt, welche die unsichtbare Welt der Mikrobiologie und deren biochemische Prozesse illuminieren. Diese werden entweder durch Expression, wie z.B. das grün fluoreszierende Protein (GFP), in das zu untersuchende Objekt eingebracht oder durch klassische Markierungsmethoden mithilfe von fluoreszierenden Immunkonjugaten installiert. Jedoch gewinnt eine alternative Strategie, die von der interdisziplinären Zusammenarbeit zwischen Chemikern, Physikern und Biologen profitiert, immer mehr an Bedeutung – die bioorthogonale Click-Chemie. Sie ermöglicht eine effiziente Fluoreszenzmarkierung der biologischen Strukturen unter minimalem Eingriff in die Abläufe der Zelle. Dazu müssen allerdings sowohl Farbstoffe als auch die biologisch aktiven Substanzen chemisch modifiziert werden, da nur dadurch die Bioorthogonalität gewährleistet werden kann.
Mittlerweile existiert eine breite Palette an fluoreszierenden Farbstoffen, die das komplette sichtbare Spektrum abdecken und sich für diverse Mikroskopiemethoden eignen. Allerdings gibt es zwei Farbstoffklassen, die sich aus der gesamten Fülle abheben und sich für hochauflösende bildgebende Experimente auf Einzelmolekülebene eignen. Zum einen ist es die Farbstofffamilie der Cyanine und insbesondere der wasserlöslichen Pentamethincyanine, die reversibel und kontrolliert zum Photoschalten animiert werden können und in der stochastisch optischen Rekonstruktionsmikroskopie Anwendung finden. Zum anderen ist es die Gruppe, der Rhodamine und Fluoresceine, die zu Xanthenfarbstoffen gehören und sich durch gute photophysikalische Eigenschaften auszeichnen.
Trotz der Beliebtheit stellt ihre Darstellung immer noch eine Herausforderung dar und limitiert deren Einsatz. Deshalb war es notwendig im Rahmen der vorliegenden Arbeit Möglichkeiten zur Syntheseoptimierung beider Farbstoffklassen zu finden, damit diese im Folgenden weiterentwickelt und an die biologische Fragestellung angepasst werden können. Die Arbeit unterteilt sich deshalb in Relation an die oben genannten Farbstoffklassen in zwei Bereiche. Im ersten Teil wurden Projekte basierend auf den wasserlöslichen Pentamethincyaninen behandelt. Im zweiten Teil beschäftigte sich die Arbeit mit Projekten, die auf Xanthen-Farbstoffen aufbauen.