004 Datenverarbeitung; Informatik
Refine
Has Fulltext
- yes (37)
Document Type
- Working Paper (37) (remove)
Language
- English (37)
Keywords
- Datennetz (14)
- P4 (5)
- SDN (4)
- 5G (2)
- Crowdsourcing (2)
- MP-DCCP (2)
- connected mobility applications (2)
- fog computing (2)
- multipath (2)
- multipath scheduling (2)
- network calculus (2)
- satellite communication (2)
- 5G core network (1)
- 5G-ATSSS (1)
- 5GC (1)
- 6G (1)
- ATSSSS (1)
- Add-on-Miss (1)
- Autorotation (1)
- Balloon (1)
- Containerization (1)
- Crowdsensing (1)
- CubeSat (1)
- Dijkstra’s algorithm (1)
- Edge-MEC-Cloud (1)
- FIFO caching strategies (1)
- Internet of Things (1)
- IoT (1)
- JCAS (1)
- Kathará (1)
- LFU (1)
- LRU (1)
- Lightning (1)
- Linux (1)
- LoRa (1)
- LoRaWan (1)
- MTC (1)
- Mars (1)
- Network Emulator (1)
- Network Experiments (1)
- Network Measurements (1)
- P4-INT (1)
- Performance Enhancing Proxies (1)
- QUIC (1)
- QoE (1)
- Quality of Experience (1)
- Quality of Experience (QoE) (1)
- Quality of Service (QoS) (1)
- RRM (1)
- Reproducibility (1)
- SBA (1)
- SDN/NVF (1)
- Sensing-aaS (1)
- TSN (1)
- TTL (1)
- TTL validation of data consistency (1)
- Testbed (1)
- URLLC (1)
- VNF (1)
- VPN (1)
- Venus (1)
- Visualized Kathará (1)
- aerospace (1)
- autonomic orchestration (1)
- autorotation (1)
- computer performance evaluation (1)
- container virtualization (1)
- crowdsourced QoE measurements (1)
- crowdsourced network measurements (1)
- data plane programming (1)
- dataplane programming (1)
- decoding error rate (1)
- delay QoS exponent (1)
- delay bound violation probability (1)
- delay constrained (1)
- descent (1)
- disjoint multi-paths (1)
- docker (1)
- dynamic flow migration (1)
- effective Bandwidth (1)
- emulation (1)
- energy efficiency (1)
- federated learning (1)
- global IPX network (1)
- haptic data (1)
- hardware-in-the-loop simulation (1)
- hardware-in-the-loop streaming system (1)
- hit ratio analysis and simulation (1)
- hybrid access (1)
- landing (1)
- latency (1)
- least cost (1)
- measurements (1)
- multipath communication (1)
- multipath packet scheduling (1)
- networking (1)
- non-terrestrial networks (1)
- orchestration (1)
- packet reception method (1)
- path computation (1)
- performance monitoring (1)
- plain orchestrating service (1)
- pos (1)
- reconfiguration (1)
- rotorcraft (1)
- scalability evaluation (1)
- service-curve estimation (1)
- short block-length (1)
- shortest path routing (1)
- signaling traffic (1)
- software defined network (1)
- state management (1)
- sustainability (1)
- timestamping method (1)
- topology (1)
- transport protocols (1)
- virtual queue (1)
- wheel (1)
Institute
EU-Project number / Contract (GA) number
- 101069547 (1)
White Paper on Crowdsourced Network and QoE Measurements – Definitions, Use Cases and Challenges
(2020)
The goal of the white paper at hand is as follows. The definitions of the terms build a framework for discussions around the hype topic ‘crowdsourcing’. This serves as a basis for differentiation and a consistent view from different perspectives on crowdsourced network measurements, with the goal to provide a commonly accepted definition in the community. The focus is on the context of mobile and fixed network operators, but also on measurements of different layers (network, application, user layer). In addition, the white paper shows the value of crowdsourcing for selected use cases, e.g., to improve QoE or regulatory issues. Finally, the major challenges and issues for researchers and practitioners are highlighted.
This white paper is the outcome of the Würzburg seminar on “Crowdsourced Network and QoE Measurements” which took place from 25-26 September 2019 in Würzburg, Germany. International experts were invited from industry and academia. They are well known in their communities, having different backgrounds in crowdsourcing, mobile networks, network measurements, network performance, Quality of Service (QoS), and Quality of Experience (QoE). The discussions in the seminar focused on how crowdsourcing will support vendors, operators, and regulators to determine the Quality of Experience in new 5G networks that enable various new applications and network architectures. As a result of the discussions, the need for a white paper manifested, with the goal of providing a scientific discussion of the terms “crowdsourced network measurements” and “crowdsourced QoE measurements”, describing relevant use cases for such crowdsourced data, and its underlying challenges. During the seminar, those main topics were identified, intensively discussed in break-out groups, and brought back into the plenum several times. The outcome of the seminar is this white paper at hand which is – to our knowledge – the first one covering the topic of crowdsourced network and QoE measurements.
In recent years several community testbeds as well as participatory sensing platforms have successfully established themselves to provide open data to everyone interested. Each of them with a specific goal in mind, ranging from collecting radio coverage data up to environmental and radiation data. Such data can be used by the community in their decision making, whether to subscribe to a specific mobile phone service that provides good coverage in an area or in finding a sunny and warm region for the summer holidays.
However, the existing platforms are usually limiting themselves to directly measurable network QoS. If such a crowdsourced data set provides more in-depth derived measures, this would enable an even better decision making. A community-driven crowdsensing platform that derives spatial application-layer user experience from resource-friendly bandwidth estimates would be such a case, video streaming services come to mind as a prime example. In this paper we present a concept for such a system based on an initial prototype that eases the collection of data necessary to determine mobile-specific QoE at large scale. In addition we reason why the simple quality metric proposed here can hold its own.
This paper gives an overview of our recent activities in the field of satellite communication networks, including an introduction to geostationary satellite systems and Low Earth Orbit megaconstellations. To mitigate the high latencies of geostationary satellite networks, TCP-splitting Performance Enhancing Proxies are deployed. However, these cannot be applied in the case of encrypted transport headers as it is the case for VPNs or QUIC. We summarize performance evaluation results from multiple measurement campaigns. In a recently concluded project, multipath communication was used to combine the advantages of very heterogeneous communication paths: low data rate, low latency (e.g., DSL light) and high data rate, high latency (e.g., geostationary satellite).
The first step towards aerial planetary exploration has been made. Ingenuity shows extremely promising results, and new missions are already underway. Rotorcraft are capable of flight. This capability could be utilized to support the last stages of Entry, Descent, and Landing. Thus, mass and complexity could be scaled down.
Autorotation is one method of descent. It describes unpowered descent and landing, typically performed by helicopters in case of an engine failure. MAPLE is suggested to test these procedures and understand autorotation on other planets. In this series of experiments, the Ingenuity helicopter is utilized. Ingenuity would autorotate a ”mid-air-landing” before continuing with normal flight. Ultimately, the collected data shall help to understand autorotation on Mars and its utilization for interplanetary exploration.
Lightning has fascinated humanity since the beginning of our existence. Different types of lightning like sprites and blue jets were discovered, and many more are theorized. However, it is very likely that these phenomena are not exclusive to our home planet. Venus’s dense and active atmosphere is a place where lightning is to be expected. Missions like Venera, Pioneer, and Galileo have carried instruments to measure electromagnetic activity. These measurements have indeed delivered results. However, these results are not clear. They could be explained by other effects like cosmic rays, plasma noise, or spacecraft noise. Furthermore, these lightning seem different from those we know from our home planet. In order to tackle these issues, a different approach to measurement is proposed. When multiple devices in different spacecraft or locations can measure the same atmospheric discharge, most other explanations become increasingly less likely. Thus, the suggested instrument and method of VELEX incorporates multiple spacecraft. With this approach, the question about the existence of lightning on Venus could be settled.
Time-to-Live (TTL) caches decouple the occupancy of objects in cache through object-specific validity timers. Stateof- the art techniques provide exact methods for the calculation of object-specific hit probabilities given entire cache hierarchies with random inter-cache network delays. The system hit probability is a provider-centric metric as it relates to the origin offload, i.e., the decrease in the number of requests that are served by the content origin server. In this paper we consider a user-centric metric, i.e., the response time, which is shown to be structurally different from the system hit probability. Equipped with the state-of-theart exact modeling technique using Markov-arrival processes we derive expressions for the expected object response time and pave a way for its optimization under network delays.
Utilizing multiple access technologies such as 5G, 4G, and Wi-Fi within a coherent framework is currently standardized by 3GPP within 5G ATSSS. Indeed, distributing packets over multiple networks can lead to increased robustness, resiliency and capacity. A key part of such a framework is the multi-access proxy, which transparently distributes packets over multiple paths. As the proxy needs to serve thousands of customers, scalability and performance are crucial for operator deployments. In this paper, we leverage recent advancements in data plane programming, implement a multi-access proxy based on the MP-DCCP tunneling approach in P4 and hardware accelerate it by deploying the pipeline on a smartNIC. This is challenging due to the complex scheduling and congestion control operations involved. We present our pipeline and data structures design for congestion control and packet scheduling state management. Initial measurements in our testbed show that packet latency is in the range of 25 μs demonstrating the feasibility of our approach.
Tactile Internet aims at allowing perceived real-time interactions between humans and machines. This requires satisfying a stringent latency requirement of haptic data streams whose data rates vary drastically as the results of perceptual codecs. This introduces a complex problem for the underlying network infrastructure to fulfill the pre-defined level of Quality of Service (QoS). However, novel networking hardware with data plane programming capability allows processing packets differently and opens up a new opportunity. For example, a dynamic and network-aware resource management strategy can help satisfy the QoS requirements of different priority flows without wasting precious bandwidth. This paper introduces virtual queues for service differentiation between different types of traffic streams, leveraging protocol independent switch architecture (PISA). We propose coordinating the management of all the queues and dynamically adapting their sizes to minimize packet loss and delay due to network congestion and ensure QoS compliance.
We attempt to identify sequences of signaling dialogs, to strengthen our understanding of the signaling behavior of IoT devices by examining a dataset containing over 270.000 distinct IoT devices whose signaling traffic has been observed over a 31-day period in a 2G network [4]. We propose a set of rules that allows the assembly of signaling dialogs into so-called sessions in order to identify common patterns and lay the foundation for future research in the areas of traffic modeling and anomaly detection.
LoRaWAN Network Planning in Smart Environments: Towards Reliability, Scalability, and Cost Reduction
(2022)
The goal in this work is to present a guidance for LoRaWAN planning to improve overall reliability for message transmissions and scalability. At the end, the cost component is discussed. Therefore, a five step approach is presented that helps to plan a LoRaWAN deployment step by step: Based on the device locations, an initial gateway placement is suggested followed by in-depth frequency and channel access planning. After an initial planning phase, updates for channel access and the initial gateway planning is suggested that should also be done periodically during network operation. Since current gateway placement approaches are only studied with random channel access, there is a lot of potential in the cell planning phase. Furthermore, the performance of different channel access approaches is highly related on network load, and thus cell size and sensor density. Last, the influence of different cell planning ideas on expected costs are discussed.
In time-sensitive networks (TSN) based on 802.1Qbv, i.e., the time-aware Shaper (TAS) protocol, precise transmission schedules and, paths are used to ensure end-to-end deterministic communication. Such resource reservations for data flows are usually established at the startup time of an application and remain untouched until the flow ends. There is no way to migrate existing flows easily to alternative paths without inducing additional delay or wasting resources. Therefore, some of the new flows cannot be embedded due to capacity limitations on certain links which leads to sub-optimal flow assignment. As future networks will need to support a large number of lowlatency flows, accommodating new flows at runtime and adapting existing flows accordingly becomes a challenging problem. In this extended abstract we summarize a previously published paper of us [1]. We combine software-defined networking (SDN), which provides better control of network flows, with TSN to be able to seamlessly migrate time-sensitive flows. For that, we formulate an optimization problem and propose different dynamic path configuration strategies under deterministic communication requirements. Our simulation results indicate that regularly reconfiguring the flow assignments can improve the latency of time-sensitive flows and can increase the number of flows embedded in the network around 4% in worst-case scenarios while still satisfying individual flow deadlines.
Today’s advanced Internet-of-Things applications raise technical challenges on cloud, edge, and fog computing. The design of an efficient, virtualized, context-aware, self-configuring orchestration system of a fog computing system constitutes a major development effort within this very innovative area of research. In this paper we describe the architecture and relevant implementation aspects of a cloudless resource monitoring system interworking with an SDN/NFV infrastructure. It realizes the basic monitoring component of the fundamental MAPE-K principles employed in autonomic computing. Here we present the hierarchical layering and functionality within the underlying fog nodes to generate a working prototype of an intelligent, self-managed orchestrator for advanced IoT applications and services. The latter system has the capability to monitor automatically various performance aspects of the resource allocation among multiple hosts of a fog computing system interconnected by SDN.
Future mobile communication networks, such as 5G and beyond, can benefit from Virtualized Network Functions (VNFs) when deployed on cloud infrastructures to achieve elasticity and scalability. However, new challenges arise as to managing states of Network Functions (NFs). Especially control plane VNFs, which are mainly found in cellular core networks like the 5G Core (5GC), received little attention since the shift towards virtualizing NFs. Most existing solutions for these core networks are often complex, intrusive, and are seldom compliant with the standard. With the emergence of 5G campus networks, UEs will be mainly machine-type devices. These devices communicate more deterministically, bringing new opportunities for elaborated state management. This work presents an emulation environment to perform rigorous measurements on state access patterns. The emulation comes with a fully parameterized Markov model for the UE to examine a wide variety of different devices. These measurements can then be used as a solid base for designing an efficient, simple, and standard conform state management solution that brings us further towards stateless core networks.
This document presents a networking latency measurement setup that focuses on affordability and universal applicability, and can provide sub-microsecond accuracy. It explains the prerequisites, hardware choices, and considerations to respect during measurement. In addition, it discusses the necessity for exhaustive latency measurements when dealing with high availability and low latency requirements. Preliminary results show that the accuracy is within ±0.02 μs when used with the Intel I350-T2 network adapter.
In scientific research, the independent reproduction of experiments is the source of trust. Detailed documentation is required to enable experiment reproduction. Reproducibility awards were created to honor the increased documentation effort. In this work, we propose a novel approach toward reproducible research—a structured experimental workflow that allows the creation of reproducible experiments without requiring additional efforts of the researcher. Moreover, we present our own testbed and toolchain, namely, plain orchestrating service (pos), which enables the creation of such experimental workflows. The experiment is documented by our proposed, fully scripted experiment structure. In addition, pos provides scripts enabling the automation of the bundling and release of all experimental artifacts. We provide an interactive environment where pos experiments can be executed and reproduced, available at https://gallenmu.github.io/single-server-experiment.
Shannon channel capacity estimation, based on large packet length is used in traditional Radio Resource Management (RRM) optimization. This is good for the normal transmission of data in a wired or wireless system. For industrial automation and control, rather short packages are used due to the short-latency requirements. Using Shannon’s formula leads in this case to inaccurate RRM solutions, thus another formula should be used to optimize radio resources in short block-length packet transmission, which is the basic of Ultra-Reliable Low-Latency Communications (URLLCs). The stringent requirement of delay Quality of Service (QoS) for URLLCs requires a link-level channel model rather than a physical level channel model. After finding the basic and accurate formula of the achievable rate of short block-length packet transmission, the RRM optimization problem can be accurately formulated and solved under the new constraints of URLLCs. In this short paper, the current mathematical models, which are used in formulating the effective transmission rate of URLLCs, will be briefly explained. Then, using this rate in RRM for URLLC will be discussed.
This work proposes a novel approach to disperse dense transmission intervals and reduce bursty traffic patterns without the need for centralized control. Furthermore, by keeping the mechanism as close to the Long Range Wide Area Network (LoRaWAN) standard as possible the suggested mechanism can be deployed within existing networks and can even be co-deployed with other devices.
The increased occurrence of Software-Defined-Networking (SDN) not only improves the dynamics and maintenance of network architectures, but also opens up new use cases and application possibilities. Based on these observations, we propose a new network topology consisting of a star and a ring topology. This hybrid topology will be called wheel topology in this paper. We have considered the static characteristics of the wheel topology and compare them with known other topologies.
In this paper, we work to understand the global IPX network from the perspective of an MVNO. In order to do this, we provide a brief description of the global architecture of mobile carriers. We provide initial results with respect to mapping the vast and complex interconnection network enabling global roaming from the point of view of a single MVNO. Finally, we provide preliminary results regarding the quality of service observed under global roaming conditions.
This paper discusses the problem of finding multiple shortest disjoint paths in modern communication networks, which is essential for ultra-reliable and time-sensitive applications. Dijkstra’s algorithm has been a popular solution for the shortest path problem, but repetitive use of it to find multiple paths is not scalable. The Multiple Disjoint Path Algorithm (MDPAlg), published in 2021, proposes the use of a single full graph to construct multiple disjoint paths. This paper proposes modifications to the algorithm to include a delay constraint, which is important in time-sensitive applications. Different delay constraint least-cost routing algorithms are compared in a comprehensive manner to evaluate the benefits of the adapted MDPAlg algorithm. Fault tolerance, and thereby reliability, is ensured by generating multiple link-disjoint paths from source to destination.
State Management at line rate is crucial for critical applications in next-generation networks. P4 is a language used in software-defined networking to program the data plane. The data plane can profit in many circumstances when it is allowed to manage its state without any detour over a controller. This work is based on a previous study by investigating the potential and performance of add-on-miss insertions of state by the data plane. The state keeping capabilities of P4 are limited regarding the amount of data and the update frequency. We follow the tentative specification of an upcoming portable-NIC-architecture and implement these changes into the software P4 target T4P4S. We show that insertions are possible with only a slight overhead compared to lookups and evaluate the influence of the rate of insertions on their latency.
Utilizing multiple access networks such as 5G, 4G, and Wi-Fi simultaneously can lead to increased robustness, resiliency, and capacity for mobile users. However, transparently implementing packet distribution over multiple paths within the core of the network faces multiple challenges including scalability to a large number of customers, low latency, and high-capacity packet processing requirements. In this paper, we offload congestion-aware multipath packet scheduling to a smartNIC. However, such hardware acceleration faces multiple challenges due to programming language and platform limitations. We implement different multipath schedulers in P4 with different complexity in order to cope with dynamically changing path capacities. Using testbed measurements, we show that our CMon scheduler, which monitors path congestion in the data plane and dynamically adjusts scheduling weights for the different paths based on path state information, can process more than 3.5 Mpps packets 25 μs latency.
Web caches often use a Time-to-live (TTL) limit to validate data consistency with web servers. We study the impact of TTL constraints on the hit ratio of basic strategies in caches of fixed size. We derive analytical results and confirm their accuracy in comparison to simulations. We propose a score-based caching method with awareness of the current TTL per data for improving the hit ratio close to the upper bound.
This paper presents a novel concept to extend state-of-the-art buffer monitoring with additional measures to estimate service-curves. The online algorithm for service-curve estimation replaces the state-of-the-art timestamp logging, as we expect it to overcome the main disadvantages of generating a huge amount of data and using a lot of CPU resources to store the data to a file during operation. We prove the accuracy of the online-algorithm offline with timestamp data and compare the derived bounds to the measured delay and backlog. We also do a proof-of- concept of the online-algorithm, implement it in LabVIEW and compare its performance to the timestamp logging by CPU load and data-size of the log-file. However, the implementation is still work-in-progress.
This paper presents a prototypical implementation of the In-band Network Telemetry (INT) specification in P4 and demonstrates a use case, where a Tofino Switch is used to measure device and network performance in a lab setting. This work is based on research activities in the area of P4 data plane programming conducted at the network lab of HTW Berlin.
The emerging serverless computing may meet Edge Cloud in a beneficial manner as the two offer flexibility and dynamicity in optimizing finite hardware resources. However, the lack of proper study of a joint platform leaves a gap in literature about consumption and performance of such integration. To this end, this paper identifies the key questions and proposes a methodology to answer them.
The Fifth Generation (5G) communication technology, its infrastructure and architecture, though already deployed in campus and small scale networks, is still undergoing continuous changes and research. Especially, in the light of future large scale deployments and industrial use cases, a detailed analysis of the performance and utilization with regard to latency and service times constraints is crucial. To this end, a fine granular investigation of the Network Function (NF) based core system and the duration for all the tasks performed by these services is necessary. This work presents the first steps towards analyzing the signaling traffic in 5G core networks, and introduces a tool to automatically extract sequence diagrams and service times for NF tasks from traffic traces.
Packets sent over a network can either get lost or reach their destination. Protocols like TCP try to solve this problem by resending the lost packets. However, retransmissions consume a lot of time and are cumbersome for the transmission of critical data. Multipath solutions are quite common to address this reliability issue and are available on almost every layer of the ISO/OSI model. We propose a solution based on a P4 network to duplicate packets in order to send them to their destination via multiple routes. The last network hop ensures that only a single copy of the traffic is further forwarded to its destination by adopting a concept similar to Bloom filters. Besides, if fast delivery is requested we provide a P4 prototype, which randomly forwards the packets over different transmission paths. For reproducibility, we implement our approach in a container-based network emulation system called Kathará.
Understanding the Performance of Different Packet Reception and Timestamping Methods in Linux
(2023)
This document briefly presents some renowned packet reception techniques for network packets in Linux systems. Further, it compares their performance when measuring packet timestamps with respect to throughput and accuracy. Both software and hardware timestamps are compared, and various parameters are examined, including frame size, link speed, network interface card, and CPU load. The results indicate that hardware timestamping offers significantly better accuracy with no downsides, and that packet reception techniques that avoid system calls offer superior measurement throughput.
In recent years, satellite communication has been expanding its field of application in the world of computer networks. This paper aims to provide an overview of how a typical scenario involving 5G Non-Terrestrial Networks (NTNs) for vehicle to everything (V2X) applications is characterized. In particular, a first implementation of a system that integrates them together will be described. Such a framework will later be used to evaluate the performance of applications such as Vehicle Monitoring (VM), Remote Driving (RD), Voice Over IP (VoIP), and others. Different configuration scenarios such as Low Earth Orbit and Geostationary Orbit will be considered.
The introduction of new types of frequency spectrum in 6G technology facilitates the convergence of conventional mobile communications and radar functions. Thus, the mobile network itself becomes a versatile sensor system. This enables mobile network operators to offer a sensing service in addition to conventional data and telephony services. The potential benefits are expected to accrue to various stakeholders, including individuals, the environment, and society in general. The paper discusses technological development, possible integration, and use cases, as well as future development areas.
In this work, we describe the network from data collection to data processing and storage as a system based on different layers. We outline the different layers and highlight major tasks and dependencies with regard to energy consumption and energy efficiency. With this view, we can outwork challenges and questions a future system architect must answer to provide a more sustainable, green, resource friendly, and energy efficient application or system. Therefore, all system layers must be considered individually but also altogether for future IoT solutions. This requires, in particular, novel sustainability metrics in addition to current Quality of Service and Quality of Experience metrics to provide a high power, user satisfying, and sustainable network.
How to Model and Predict the Scalability of a Hardware-In-The-Loop Test Bench for Data Re-Injection?
(2023)
This paper describes a novel application of an empirical network calculus model based on measurements of a hardware-in-the-loop (HIL) test system. The aim is to predict the performance of a HIL test bench for open-loop re-injection in the context of scalability. HIL test benches are distributed computer systems including software, hardware, and networking devices. They are used to validate complex technical systems, but have not yet been system under study themselves. Our approach is to use measurements from the HIL system to create an empirical model for arrival and service curves. We predict the performance and design the previously unknown parameters of the HIL simulator with network calculus (NC), namely the buffer sizes and the minimum needed pre-buffer time for the playback buffer. We furthermore show, that it is possible to estimate the CPU load from arrival and service-curves based on the utilization theorem, and hence estimate the scalability of the HIL system in the context of the number of sensor streams.
Cooperative, connected and automated mobility (CCAM) systems depend on a reliable communication to provide their service and more crucially to ensure the safety of users. One way to ensure the reliability of a data transmission is to use multiple transmission technologies in combination with redundant flows. In this paper, we describe a system requiring multipath communication in the context of CCAM. To this end, we introduce a data plane-based scheduler that uses replication and integration modules to provide redundant and transparent multipath communication. We provide an analytical model for the full replication module of the system and give an overview of how and where the data-plane scheduler components can be realized.
Cooperative, connected and automated mobility (CCAM) systems depend on a reliable communication to provide their service and more crucially to ensure the safety of users. One way to ensure the reliability of a data transmission is to use multiple transmission technologies in combination with redundant flows. In this paper, we describe a system requiring multipath communication in the context of CCAM. To this end, we introduce a data plane-based scheduler that uses replication and integration modules to provide redundant and transparent multipath communication. We provide an analytical model for the full replication module of the system and give an overview of how and where the data-plane scheduler components can be realized.
In network research, reproducibility of experiments is not always easy to achieve. Infrastructures are cumbersome to set up or are not available due to vendor-specific devices. Emulators try to overcome those issues to a given extent and are available in different service models. Unfortunately, the usability of emulators requires time-consuming efforts and a deep understanding of their functionality. At first, we analyze to which extent currently available open-source emulators support network configurations and how user-friendly they are. With these insights, we describe, how an ease-to-use emulator is implemented and may run as a Network Emulator as a Service (NEaaS). Therefore, virtualization plays a major role in order to deploy a NEaaS based on Kathará.
Service orchestration requires enormous attention and is a struggle nowadays. Of course, virtualization provides a base level of abstraction for services to be deployable on a lot of infrastructures. With container virtualization, the trend to migrate applications to a micro-services level in order to be executable in Fog and Edge Computing environments increases manageability and maintenance efforts rapidly. Similarly, network virtualization adds effort to calibrate IP flows for Software-Defined Networks and eventually route it by means of Network Function Virtualization. Nevertheless, there are concepts like MAPE-K to support micro-service distribution in next-generation cloud and network environments. We want to explore, how a service distribution can be improved by adopting machine learning concepts for infrastructure or service changes. Therefore, we show how federated machine learning is integrated into a cloud-to-fog-continuum without burdening single nodes.