004 Datenverarbeitung; Informatik
Refine
Has Fulltext
- yes (75)
Is part of the Bibliography
- yes (75)
Year of publication
Document Type
- Doctoral Thesis (75) (remove)
Keywords
- Leistungsbewertung (13)
- Robotik (8)
- Mobiler Roboter (7)
- Autonomer Roboter (6)
- Komplexitätstheorie (5)
- Optimierung (5)
- Simulation (5)
- Theoretische Informatik (5)
- Modellierung (4)
- Netzwerk (4)
- Optimization (4)
- Overlay-Netz (4)
- Routing (4)
- Verteiltes System (4)
- Algorithmus (3)
- Approximationsalgorithmus (3)
- Computer Vision (3)
- Computersimulation (3)
- Dienstgüte (3)
- Drahtloses Sensorsystem (3)
- Graph (3)
- Graphenzeichnen (3)
- Komplexität (3)
- Lokalisation (3)
- Mensch-Maschine-Schnittstelle (3)
- Netzwerkmanagement (3)
- Peer-to-Peer-Netz (3)
- Performance Evaluation (3)
- graph drawing (3)
- Algorithmische Geometrie (2)
- Ausfallsicheres System (2)
- Ausfallsicherheit (2)
- Benutzerschnittstelle (2)
- Dot-Depth Problem (2)
- Drahtloses lokales Netz (2)
- Effizienter Algorithmus (2)
- Entscheidbarkeit (2)
- Fernwartung (2)
- Future Internet (2)
- Human-Robot-Interaction (2)
- IEEE 802.11 (2)
- Kleinsatellit (2)
- Kreuzung (2)
- Localization (2)
- Machine Learning (2)
- Maschinelles Lernen (2)
- Maschinelles Sehen (2)
- Mehragentensystem (2)
- Mensch-Maschine-System (2)
- Mensch-Roboter-Interaktion (2)
- Mixed Reality (2)
- PROLOG <Programmiersprache> (2)
- Punktwolke (2)
- QoE (2)
- Quality of Experience (2)
- Rechnernetz (2)
- Resilience (2)
- Resource Management (2)
- Ressourcenmanagement (2)
- Robotics (2)
- Satellit (2)
- Situation Awareness (2)
- Software Defined Networking (2)
- Teleoperation (2)
- Theoretical Computer Science (2)
- User Interface (2)
- Verbotsmuster (2)
- approximation algorithm (2)
- decidability (2)
- dot-depth problem (2)
- endliche Automaten (2)
- finite automata (2)
- forbidden patterns (2)
- knowledge representation (2)
- mobile robots (2)
- regular languages (2)
- reguläre Sprachen (2)
- simulation (2)
- 3D Pointcloud (1)
- 3D Punktwolke (1)
- 3D Reconstruction (1)
- 3D Sensor (1)
- 3D Vision (1)
- 3D point cloud (1)
- 3D thermal mapping (1)
- 3D-Rekonstruktion (1)
- 4G Networks (1)
- 6DOF Pose Estimation (1)
- Abhängigskeitsgraph (1)
- Ablaufplanung (1)
- Admission Control (1)
- Agent <Informatik> (1)
- Agent <Künstliche Intelligenz> (1)
- Agent-based Simulation (1)
- Agentbased System (1)
- Agenten-basierte Simulation (1)
- Angewandte Informatik (1)
- Anwendung (1)
- Approximation (1)
- Arterie (1)
- Artery (1)
- Automat <Automatentheorie> (1)
- Automata Theory (1)
- Automatentheorie (1)
- Autonomer Agent (1)
- Autonomie (1)
- Autonomous Robot (1)
- Autonomous multi-vehicle systems (1)
- Backbone-Netz (1)
- Background Knowledge (1)
- Benutzerinteraktion (1)
- Berechenbarkeit (1)
- Berechnungskomplexität (1)
- Bernoulli stochastics (1)
- Bernoulli-Raum (1)
- Bernoullische Stochastik (1)
- Bernoullispace (1)
- Betriebssystem (1)
- Bewegungsablauf (1)
- Bewegungskompensation (1)
- Bewegungskoordination (1)
- Bewegungsplanung (1)
- Bildverarbeitung (1)
- Bit Parallelität (1)
- BitTorrent (1)
- Bodenstation (1)
- Boolean Grammar (1)
- Boolean equivalence (1)
- Boolean functions (1)
- Boolean hierarchy (1)
- Boolean isomorphism (1)
- Boolesche Funktionen (1)
- Boolesche Grammatik (1)
- Boolesche Hierarchie (1)
- CASE (1)
- Calibration (1)
- Call Graph (1)
- Chord (1)
- Clones (1)
- Cloud Gaming (1)
- Communication Networks (1)
- Complexity Theory (1)
- Compression (1)
- Computational Geometry (1)
- Computational complexity (1)
- Computerunterstütztes Lernen (1)
- Content Distribution (1)
- DHT (1)
- Data Mining (1)
- Databases (1)
- Datenbanken (1)
- Datenbasis (1)
- Deep Georeferencing (1)
- Deep Learning (1)
- Dependency Graph (1)
- Design (1)
- Dezentrale Regelung (1)
- Diagnosesystem (1)
- Dichotomy (1)
- Diskrete Simulation (1)
- Distributed Space Systems (1)
- Domänenspezifische Sprache (1)
- Dot-Depth-Hierarchie (1)
- Drahtloses vermaschtes Netz (1)
- Dreidimensionale Rekonstruktion (1)
- Dynamic Environments (1)
- Dynamic Memory Management (1)
- Dynamische Speicherverwaltung (1)
- Echtzeitsystem (1)
- Echzeit (1)
- Edge-based Intelligence (1)
- Eingebettetes System (1)
- Elasticity tensor (1)
- Elastizitätstensor (1)
- Embedded Systems (1)
- Endpoint Mobility (1)
- Energieeffizienz (1)
- Energy efficiency (1)
- Entscheidungsfindung (1)
- Erfüllbarkeitsproblem (1)
- Erweiterte Realität (1)
- Euclidean plane (1)
- Euklidische Ebene (1)
- Expert System (1)
- Expertensystem (1)
- Fahrsimulation (1)
- Fahrsimulator (1)
- Fairness (1)
- Feature Based Registration (1)
- Feature-Matching (1)
- Fehlertoleranz (1)
- Feldprogrammierbare Architekturen (1)
- Fernsteuerung (1)
- Field programmable gate array (1)
- Field-programmable Gate Arrays (1)
- Formale Sprache (1)
- Formation (1)
- Formationsbewegung (1)
- Forschung (1)
- Funkressourcenverwaltung (1)
- Gastroenterologische Endoskopie (1)
- Gay-Array-Bauelement (1)
- Generalisierung <Kartografie> (1)
- Generation Problem (1)
- Generierungsproblem (1)
- Genetic Optimization (1)
- Genetische Optimierung (1)
- Georeferenzierung (1)
- Gllobal self-localisation (1)
- Globale Selbstlokalisation (1)
- Ground Station Networks (1)
- H.264 SVC (1)
- H.264/SVC (1)
- HSPA (1)
- Halbordnungen (1)
- Hardware (1)
- Herzkatheter (1)
- Herzkathetereingriff (1)
- Hierarchische Simulation (1)
- Hintergrundwissen (1)
- Historical Maps (1)
- Historische Karte (1)
- Historische Landkarten (1)
- Hospital (1)
- IEEE 802.11e (1)
- IEEE 802.15.4 (1)
- IP (1)
- Implementierung <Informatik> (1)
- Industrial internet (1)
- Industrie 4.0 (1)
- Inferenz <Künstliche Intelligenz> (1)
- Information Extraction (1)
- Information Retrieval (1)
- Information-Retrieval-System (1)
- Interaktion (1)
- Internet Protokoll (1)
- Invertierte Liste (1)
- Isomorphie (1)
- Itinerare (1)
- Itineraries (1)
- Java <Programmiersprache> (1)
- Java Message Service (1)
- Kademlia (1)
- Kanalzugriff (1)
- Karte (1)
- Kartierung (1)
- Klassendiagramm (1)
- Knowledge Discovery (1)
- Knowledge-based Systems Engineering (1)
- Kombinatorik (1)
- Kommunikation (1)
- Kommunikationsnetze (1)
- Komplexitätsklasse (1)
- Komplexitätsklasse NP (1)
- Konvexe Zeichnungen (1)
- Konzeptsuche (1)
- Kooperierende mobile Roboter (1)
- Krankenhaus (1)
- Kreuzungsminimierung (1)
- Kurve (1)
- Künstliche Intelligenz (1)
- Landkartenbeschriftung (1)
- Landnutzungskartierung (1)
- Laser scanning (1)
- Learning (1)
- Lehre (1)
- Lernen (1)
- Lidar (1)
- Link rate adaptation (1)
- Linkratenanpassung (1)
- Logic Programming (1)
- Logische Programmierung (1)
- MAC (1)
- Mathematische Modellierung (1)
- Mathematisches Modell (1)
- Medical Image Analysis (1)
- Medium <Physik> (1)
- Medizin (1)
- Mehrebenensimulation (1)
- Mehrfahrzeugsysteme (1)
- Mehrkriterielle Optimierung (1)
- Mehrpfadübertragung (1)
- Mehrschichtnetze (1)
- Mehrschichtsystem (1)
- Mesh Networks (1)
- Mesh Netze (1)
- Middleware (1)
- Miniaturisierung (1)
- Minimally invasive vascular intervention (1)
- Missionsbetrieb (1)
- Mobile Roboter (1)
- Mobiles Internet (1)
- Mobilfunk (1)
- Modellbasierte Diagnose (1)
- Modellierungstechniken (1)
- Modelling (1)
- Modularität (1)
- Motion Planning (1)
- Multi-Agent-Simulation (1)
- Multi-Layer (1)
- Multi-Network Service (1)
- Multi-Netzwerk Dienste (1)
- Multi-Paradigm Programming (1)
- Multi-Paradigm Programming Framework (1)
- Multi-agent system (1)
- Multiagentensimulation (1)
- Multiagentensystem (1)
- Multimedia (1)
- Multipath Transmission (1)
- Mustererkennung (1)
- NP (1)
- NP-Vollständigkeit (1)
- NP-complete sets (1)
- NP-hardness (1)
- NP-hartes Problem (1)
- NP-schweres Problem (1)
- Network Management (1)
- Network Virtualization (1)
- Netzplantechnik (1)
- Netzplanung (1)
- Netzwerkplanung (1)
- Netzwerkvirtualisierung (1)
- Next Generation Networks (1)
- Nichtholonome Fahrzeuge (1)
- Nichtlineare Regelung (1)
- Object Detection (1)
- Object-Oriented Programming (1)
- Objektorientierte Programmierung (1)
- Operator (1)
- Optimale Kontrolle (1)
- Optimierungsproblem (1)
- Overlay (1)
- Overlay Netzwerke (1)
- Overlay networks (1)
- Overlays (1)
- Panorama Images (1)
- Parameterkalibrierung (1)
- Partition <Mengenlehre> (1)
- Partitionen (1)
- Path Computation Element (1)
- Pattern Recognition (1)
- Peer-to-Peer (1)
- Performance Analysis (1)
- Performance Modeling (1)
- Pfadberechnungselement (1)
- Picosatellite (1)
- Planare Graphen (1)
- Planausführung (1)
- Planung (1)
- Planungssystem (1)
- Polyeder (1)
- Polypektomie (1)
- Post's Classes (1)
- Postsche Klassen (1)
- Prediction (1)
- Process Optimization (1)
- Programmierbare logische Anordnung (1)
- Prozessoptimierung (1)
- Publish-Subscribe-System (1)
- QoS (1)
- Quality of Experience QoE (1)
- Quality of Service (1)
- Quality-of-Experience (1)
- Quality-of-Service (QoS) (1)
- Quantor (1)
- Raumdaten (1)
- Real-Time Operating Systems (1)
- Real-time (1)
- Refactoring (1)
- Regelbasiertes System (1)
- Regelung (1)
- Registration (1)
- Registrierung (1)
- Reguläre Sprache (1)
- Rendezvous (1)
- Ressourcen Management (1)
- Ressourcenallokation (1)
- Rettungsroboter (1)
- Robot (1)
- Roboter (1)
- Rule-based Systems (1)
- Scheduling (1)
- Search-and-Rescue (1)
- Selbstkalibrierung (1)
- Self-calibration (1)
- Semantic Web (1)
- Semantics (1)
- Semantik (1)
- Sensor (1)
- Service Mobility (1)
- Sichtbarkeit (1)
- Similarity Measure (1)
- Simulator (1)
- Situationsbewusstsein (1)
- Skype (1)
- Small Satellites (1)
- Smart User Interaction (1)
- Social Web (1)
- Software (1)
- Software Engineering (1)
- Source Code Visualization (1)
- Soziale Software (1)
- Standortproblem (1)
- Sternfreie Sprache (1)
- Steuerung (1)
- Stiffness (1)
- Stochastik (1)
- Stochastikon (1)
- Strahlentherapie (1)
- Straubing-Th´erien-Hierarchie (1)
- Straßennetzwerk (1)
- Straßenverkehr (1)
- Strukturelle Komplexität (1)
- Subgroup Mining (1)
- Subgruppenentdeckung (1)
- Suchverfahren (1)
- System (1)
- Szenariogenerierung (1)
- Teaching (1)
- Telematik (1)
- Theoretical computer science (1)
- Thermografie (1)
- Trainingssystem (1)
- Travelling-salesman-Problem (1)
- Tumor motion (1)
- Tumorbewegung (1)
- U-Bahnlinienplan (1)
- UI and Interaction Design (1)
- UML Klassendiagramm (1)
- UML class diagram (1)
- UMTS (1)
- URL (1)
- Underwater Mapping (1)
- Underwater Scanning (1)
- Unstetige Regelung (1)
- Usability (1)
- User Behavior (1)
- User Participation (1)
- Verbotenes Muster (1)
- Verbände (1)
- Verkehrslenkung (1)
- Verteilung von Inhalten (1)
- Video Quality Monitoring (1)
- Video Streaming (1)
- Videoübertragung (1)
- Virtuelles Netzwerk (1)
- Visibility (1)
- Visual Tracking (1)
- Visualisierung (1)
- Visualization (1)
- Voice-over-IP (VoIP) (1)
- Volltextsuche (1)
- Vorhersage (1)
- WLAN (1)
- Warteschlangentheorie (1)
- Werkstattdiagnose (1)
- Winkel (1)
- Wire relaxation (1)
- Wireless LAN (1)
- Wireless Sensor/Actuator Systems (1)
- Wissensbasiertes System (1)
- Wissensendeckung (1)
- Wissensrepräsentation (1)
- Worterweiterungen (1)
- Zeichnen von Graphen (1)
- Zeitdiskretes System (1)
- Zugangskontrolle (1)
- Zählprobleme (1)
- abgeschlossene Klassen (1)
- administrative boundary (1)
- admission control (1)
- aftermarket diagnostic (1)
- agile Prozesse (1)
- agile processes (1)
- angular schematization (1)
- approximation algorithms (1)
- automatic Layout (1)
- automatisches Layout (1)
- bit-parallel (1)
- boundary labeling (1)
- building (1)
- car-like robots (1)
- competitive location (1)
- complexity (1)
- computational complexity (1)
- computergestützte Softwaretechnik (1)
- concept search (1)
- constrained forest (1)
- contact representation (1)
- counting problems (1)
- crossing minimization (1)
- curves (1)
- d3web.Train (1)
- data structure (1)
- database (1)
- decission finding (1)
- definite clause grammars (1)
- dial a ride (1)
- discrete-time analysis (1)
- driving simulation (1)
- dynamische Umgebungen (1)
- edge labeled graphs (1)
- educational tool (1)
- efficient algorithm (1)
- fast reroute (1)
- feature-matching (1)
- field-programmable architectures (1)
- field-programmable gate arrays (1)
- formation driving (1)
- full-text search (1)
- graph (1)
- graph decomposition (1)
- graphs (1)
- hardness (1)
- hybrid Diagnostic (1)
- hybride Diagnose (1)
- independent crossing (1)
- intelligente Applikationen (1)
- internet protocol (1)
- labeling (1)
- land-cover area (1)
- lattices (1)
- load balancing (1)
- logic programming (1)
- metro map (1)
- mission operation (1)
- mobile networks (1)
- model predictive control (1)
- model-base diagnosis (1)
- modeling techniques (1)
- monotone drawing (1)
- morphing (1)
- multi-vehicle formations (1)
- multi-vehicle rendezvous (1)
- n-Gramm (1)
- n-gram (1)
- network (1)
- network design (1)
- network planning (1)
- network softwarization (1)
- network upgrade (1)
- networked robotics (1)
- networks (1)
- nonholonomic vehicles (1)
- optimization (1)
- overprovisioning (1)
- partitions (1)
- performance evaluation (1)
- plan execution (1)
- posets (1)
- q-Gramm (1)
- q-gram (1)
- radio resource management (1)
- receding horizon control (1)
- reload cost (1)
- remote control (1)
- resilience (1)
- right angle crossing (1)
- road network (1)
- robotics (1)
- routing (1)
- scenario creation (1)
- scheduling (1)
- semantic web (1)
- semantical aesthetic (1)
- semantische Ästhetik (1)
- sensor (1)
- simultaneous embedding (1)
- skalierbare Diagnose (1)
- slam (1)
- smooth orthogonal drawing (1)
- snow shoveling (1)
- spanning tree (1)
- stochastic thinking (1)
- stochastisches Denken (1)
- structural complexity (1)
- system (1)
- telematics (1)
- training systems (1)
- trajectory planning (1)
- tree (1)
- v (1)
- vernetzte Roboter (1)
- vom Nutzer erfahrene Dienstgüte QoE (1)
- voting location (1)
- word clouds (1)
- word extensions (1)
- zooming (1)
- zukünftige Kommunikationsnetze (1)
- zukünftiges Internet (1)
- Ähnlichkeitsmaß (1)
Institute
- Institut für Informatik (75) (remove)
Schriftenreihe
Sonstige beteiligte Institutionen
A complete simulation system is proposed that can be used as an educational tool by physicians in training basic skills of Minimally Invasive Vascular Interventions. In the first part, a surface model is developed to assemble arteries having a planar segmentation. It is based on Sweep Surfaces and can be extended to T- and Y-like bifurcations. A continuous force vector field is described, representing the interaction between the catheter and the surface. The computation time of the force field is almost unaffected when the resolution of the artery is increased.
The mechanical properties of arteries play an essential role in the study of the circulatory system dynamics, which has been becoming increasingly important in the treatment of cardiovascular diseases. In Virtual Reality Simulators, it is crucial to have a tissue model that responds in real time. In this work, the arteries are discretized by a two dimensional mesh and the nodes are connected by three kinds of linear springs. Three tissue layers (Intima, Media, Adventitia) are considered and, starting from the stretch-energy density, some of the elasticity tensor components are calculated. The physical model linearizes and homogenizes the material response, but it still contemplates the geometric nonlinearity. In general, if the arterial stretch varies by 1% or less, then the agreement between the linear and nonlinear models is trustworthy.
In the last part, the physical model of the wire proposed by Konings is improved. As a result, a simpler and more stable method is obtained to calculate the equilibrium configuration of the wire. In addition, a geometrical method is developed to perform relaxations. It is particularly useful when the wire is hindered in the physical method because of the boundary conditions. The physical and the geometrical methods are merged, resulting in efficient relaxations. Tests show that the shape of the virtual wire agrees with the experiment. The proposed algorithm allows real-time executions and the hardware to assemble the simulator has a low cost.
Imagine a technology that automatically creates a full 3D thermal model of an environment and detects temperature peaks in it. For better orientation in the model it is enhanced with color information. The current state of the art for analyzing temperature related issues is thermal imaging. It is relevant for energy efficiency but also for securing important infrastructure such as power supplies and temperature regulation systems. Monitoring and analysis of the data for a large building is tedious as stable conditions need to be guaranteed for several hours and detailed notes about the pose and the environment conditions for each image must be taken. For some applications repeated measurements are necessary to monitor changes over time. The analysis of the scene is only possible through expertise and experience.
This thesis proposes a robotic system that creates a full 3D model of the environment with color and thermal information by combining thermal imaging with the technology of terrestrial laser scanning. The addition of a color camera facilitates the interpretation of the data and allows for other application areas. The data from all sensors collected at different positions is joined in one common reference frame using calibration and scan matching. The first part of the thesis deals with 3D point cloud processing with the emphasis on accessing point cloud data efficiently, detecting planar structures in the data and registering multiple point clouds into one common coordinate system. The second part covers the autonomous exploration and data acquisition with a mobile robot with the objective to minimize the unseen area in 3D space. Furthermore, the combination of different modalities, color images, thermal images and point cloud data through calibration is elaborated. The last part presents applications for the the collected data. Among these are methods to detect the structure of building interiors for reconstruction purposes and subsequent detection and classification of windows. A system to project the gathered thermal information back into the scene is presented as well as methods to improve the color information and to join separately acquired point clouds and photo series.
A full multi-modal 3D model contains all the relevant geometric information about the recorded scene and enables an expert to fully analyze it off-site. The technology clears the path for automatically detecting points of interest thereby helping the expert to analyze the heat flow as well as localize and identify heat leaks. The concept is modular and neither limited to achieving energy efficiency nor restricted to the use in combination with a mobile platform. It also finds its application in fields such as archaeology and geology and can be extended by further sensors.
While teleoperation of technical highly sophisticated systems has already been a wide field of research, especially for space and robotics applications, the automation industry has not yet benefited from its results. Besides the established fields of application, also production lines with industrial robots and the surrounding plant components are in need of being remotely accessible. This is especially critical for maintenance or if an unexpected problem cannot be solved by the local specialists.
Special machine manufacturers, especially robotics companies, sell their technology worldwide. Some factories, for example in emerging economies, lack qualified personnel for repair and maintenance tasks. When a severe failure occurs, an expert of the manufacturer needs to fly there, which leads to long down times of the machine or even the whole production line. With the development of data networks, a huge part of those travels can be omitted, if appropriate teleoperation equipment is provided.
This thesis describes the development of a telemaintenance system, which was established in an active production line for research purposes. The customer production site of Braun in Marktheidenfeld, a factory which belongs to Procter & Gamble, consists of a six-axis cartesian industrial robot by KUKA Industries, a two-component injection molding system and an assembly unit. The plant produces plastic parts for electric toothbrushes.
In the research projects "MainTelRob" and "Bayern.digital", during which this plant was utilised, the Zentrum für Telematik e.V. (ZfT) and its project partners develop novel technical approaches and procedures for modern telemaintenance. The term "telemaintenance" hereby refers to the integration of computer science and communication technologies into the maintenance strategy. It is particularly interesting for high-grade capital-intensive goods like industrial robots. Typical telemaintenance tasks are for example the analysis of a robot failure or difficult repair operations. The service department of KUKA Industries is responsible for the worldwide distributed customers who own more than one robot. Currently such tasks are offered via phone support and service staff which travels abroad. They want to expand their service activities on telemaintenance and struggle with the high demands of teleoperation especially regarding security infrastructure. In addition, the facility in Marktheidenfeld has to keep up with the high international standards of Procter & Gamble and wants to minimize machine downtimes. Like 71.6 % of all German companies, P&G sees a huge potential for early information on their production system, but complains about the insufficient quality and the lack of currentness of data.
The main research focus of this work lies on the human machine interface for all human tasks in a telemaintenance setup. This thesis provides own work in the use of a mobile device in context of maintenance, describes new tools on asynchronous remote analysis and puts all parts together in an integrated telemaintenance infrastructure. With the help of Augmented Reality, the user performance and satisfaction could be raised. A special regard is put upon the situation awareness of the remote expert realized by different camera viewpoints. In detail the work consists of:
- Support of maintenance tasks with a mobile device
- Development and evaluation of a context-aware inspection tool
- Comparison of a new touch-based mobile robot programming device to the former teach pendant
- Study on Augmented Reality support for repair tasks with a mobile device
- Condition monitoring for a specific plant with industrial robot
- Human computer interaction for remote analysis of a single plant cycle
- A big data analysis tool for a multitude of cycles and similar plants
- 3D process visualization for a specific plant cycle with additional virtual information
- Network architecture in hardware, software and network infrastructure
- Mobile device computer supported collaborative work for telemaintenance
- Motor exchange telemaintenance example in running production environment
- Augmented reality supported remote plant visualization for better situation awareness
Modern software is often realized as a modular combination of subsystems for, e. g.,
knowledge management, visualization, verification, or the interaction with users. As
a result, software libraries from possibly different programming languages have to
work together. Even more complex the case is if different programming paradigms
have to be combined. This type of diversification of programming languages and
paradigms in just one software application can only be mastered by mechanisms
for a seamless integration of the involved programming languages. However, the
integration of the common logic programming language Prolog and the popular
object-oriented programming language Java is complicated by various interoperability
problems which stem on the one hand from the paradigmatic gap between the
programming languages, and on the other hand, from the diversity of the available
Prolog systems.
The subject of the thesis is the investigation of novel mechanisms for the integration
of logic programming in Prolog and object–oriented programming in Java. We are
particularly interested in an object–oriented, uniform approach which is not specific
to just one Prolog system. Therefore, we have first identified several important
criteria for the seamless integration of Prolog and Java from the object–oriented
perspective. The main contribution of the thesis is a novel integration framework
called the Connector Architecture for Prolog and Java (CAPJa). The framework is
completely implemented in Java and imposes no modifications to the Java Virtual
Machine or Prolog. CAPJa provides a semi–automated mechanism for the integration
of Prolog predicates into Java. For compact, readable, and object–oriented
queries to Prolog, CAPJa exploits lambda expressions with conditional and relational
operators in Java. The communication between Java and Prolog is based
on a fully automated mapping of Java objects to Prolog terms, and vice versa. In
Java, an extensible system of gateways provides connectivity with various Prolog
system and, moreover, makes any connected Prolog system easily interchangeable,
without major adaption in Java.
3D point clouds are a de facto standard for 3D documentation and modelling. The advances in laser scanning technology broadens the usability and access to 3D measurement systems. 3D point clouds are used in many disciplines such as robotics, 3D modelling, archeology and surveying. Scanners are able to acquire up to a million of points per second to represent the environment with a dense point cloud. This represents the captured environment with a very high degree of detail. The combination of laser scanning technology with photography adds color information to the point clouds. Thus the environment is represented more realistically. Full 3D models of environments, without any occlusion, require multiple scans. Merging point clouds is a challenging process. This thesis presents methods for point cloud registration based on the panorama images generated from the scans. Image representation of point clouds introduces 2D image processing methods to 3D point clouds. Several projection methods for the generation of panorama maps of point clouds are presented in this thesis. Additionally, methods for point cloud reduction and compression based on the panorama maps are proposed. Due to the large amounts of data generated from the 3D measurement systems these methods are necessary to improve the point cloud processing, transmission and archiving. This thesis introduces point cloud processing methods as a novel framework for the digitisation of archeological excavations. The framework replaces the conventional documentation methods for excavation sites. It employs point clouds for the generation of the digital documentation of an excavation with the help of an archeologist on-site. The 3D point cloud is used not only for data representation but also for analysis and knowledge generation. Finally, this thesis presents an autonomous indoor mobile mapping system. The mapping system focuses on the sensor placement planning method. Capturing a complete environment requires several scans. The sensor placement planning method solves for the minimum required scans to digitise large environments. Combining this method with a navigation system on a mobile robot platform enables it to acquire data fully autonomously. This thesis introduces a novel hole detection method for point clouds to detect obscured parts of a captured environment. The sensor placement planning method selects the next scan position with the most coverage of the obscured environment. This reduces the required number of scans. The navigation system on the robot platform consist of path planning, path following and obstacle avoidance. This guarantees the safe navigation of the mobile robot platform between the scan positions. The sensor placement planning method is designed as a stand alone process that could be used with a mobile robot platform for autonomous mapping of an environment or as an assistant tool for the surveyor on scanning projects.
Operators of Higher Order
(1998)
Motivated by results on interactive proof systems we investigate the computational power of quantifiers applied to well-known complexity classes.
In special, we are interested in existential, universal and probabilistic bounded error quantifiers ranging over words and sets of words, i.e. oracles if we think in a Turing machine model.
In addition to the standard oracle access mechanism, we also consider quantifiers ranging over oracles to which access is restricted in a certain way.
Small satellites contribute significantly in the rapidly evolving innovation in space engineering, in particular in distributed space systems for global Earth observation and communication services. Significant mass reduction by miniaturization, increased utilization of commercial high-tech components, and in particular standardization are the key drivers for modern miniature space technology.
This thesis addresses key fields in research and development on miniature satellite technology regarding efficiency, flexibility, and robustness. Here, these challenges are addressed by the University of Wuerzburg’s advanced pico-satellite bus, realizing a generic modular satellite architecture and standardized interfaces for all subsystems. The modular platform ensures reusability, scalability, and increased testability due to its flexible subsystem interface which allows efficient and compact integration of the entire satellite in a plug-and-play manner.
Beside systematic design for testability, a high degree of operational robustness is achieved by the consequent implementation of redundancy of crucial subsystems. This is combined with efficient fault detection, isolation and recovery mechanisms. Thus, the UWE-3 platform, and in particular the on-board data handling system and the electrical power system, offers one of the most efficient pico-satellite architectures launched in recent years and provides a solid basis for future extensions.
The in-orbit performance results of the pico-satellite UWE-3 are presented and summarize successful operations since its launch in 2013. Several software extensions and adaptations have been uploaded to UWE-3 increasing its capabilities. Thus, a very flexible platform for in-orbit software experiments and for evaluations of innovative concepts was provided and tested.
Graphs are a frequently used tool to model relationships among entities. A graph is a binary relation between objects, that is, it consists of a set of objects (vertices) and a set of pairs of objects (edges).
Networks are common examples of modeling data as a graph. For example, relationships between persons in a social network, or network links between computers in a telecommunication network can be represented by a graph.
The clearest way to illustrate the modeled data is to visualize the graphs. The field of Graph Drawing deals with the problem of finding algorithms to automatically generate graph visualizations. The task is to find a "good" drawing, which can be measured by different criteria such as number of crossings between edges or the used area. In this thesis, we study Angular Schematization in Graph Drawing. By this, we mean drawings
with large angles (for example, between the edges at common vertices or at crossing points).
The thesis consists of three parts. First, we deal with the placement of boxes. Boxes are axis-parallel rectangles that can, for example, contain text.
They can be placed on a map to label important sites, or can be used to describe semantic relationships between words in a word network. In the second part of the thesis, we consider graph drawings visually guide the
viewer. These drawings generally induce large angles between edges that meet at a vertex. Furthermore, the edges are drawn crossing-free and in a way that
makes them easy to follow for the human eye. The third and final part is devoted to crossings with large angles. In drawings with crossings, it is important to have large angles between edges at their crossing point, preferably right angles.
Knowledge-based systems (KBS) face an ever-increasing interest in various disciplines and contexts. Yet, the former aim to construct the ’perfect intelligent software’ continuously shifts to user-centered, participative solutions. Such systems enable users to contribute their personal knowledge to the problem solving process for increased efficiency and an ameliorated user experience. More precisely, we define non-functional key requirements of participative KBS as: Transparency (encompassing KBS status mediation), configurability (user adaptability, degree of user control/exploration), quality of the KB and UI, and evolvability (enabling the KBS to grow mature with their users). Many of those requirements depend on the respective target users, thus calling for a more user-centered development. Often, also highly expertise domains are targeted — inducing highly complex KBs — which requires a more careful and considerate UI/interaction design. Still, current KBS engineering (KBSE) approaches mostly focus on knowledge acquisition (KA) This often leads to non-optimal, little reusable, and non/little evaluated KBS front-end solutions.
In this thesis we propose a more encompassing KBSE approach. Due to the strong mutual influences between KB and UI, we suggest a novel form of intertwined UI and KB development. We base the approach on three core components for encompassing KBSE:
(1) Extensible prototyping, a tailored form of evolutionary prototyping; this builds on mature UI prototypes and offers two extension steps for the anytime creation of core KBS prototypes (KB + core UI) and fully productive KBS (core KBS prototype + common framing functionality). (2) KBS UI patterns, that define reusable solutions for the core KBS UI/interaction; we provide a basic collection of such patterns in this work. (3) Suitable usability instruments for the assessment of the KBS artifacts. Therewith, we do not strive for ’yet another’ self-contained KBS engineering methodology. Rather, we motivate to extend existing approaches by the proposed key components. We demonstrate this based on an agile KBSE model.
For practical support, we introduce the tailored KBSE tool ProKEt. ProKEt offers a basic selection of KBS core UI patterns and corresponding configuration options out of the box; their further adaption/extension is possible on various levels of expertise. For practical usability support, ProKEt offers facilities for quantitative and qualitative data collection. ProKEt explicitly fosters the suggested, intertwined development of UI and KB. For seamlessly integrating KA activities, it provides extension points for two selected external KA tools: For KnowOF, a standard office based KA environment. And for KnowWE, a semantic wiki for collaborative KA. Therewith, ProKEt offers powerful support for encompassing, user-centered KBSE.
Finally, based on the approach and the tool, we also developed a novel KBS type: Clarification KBS as a mashup of consultation and justification KBS modules. Those denote a specifically suitable realization for participative KBS in highly expertise contexts and consequently require a specific design. In this thesis, apart from more common UI solutions, we particularly also introduce KBS UI patterns especially tailored towards Clarification KBS.
At the center of the Internet’s protocol stack stands the Internet Protocol (IP) as a common denominator that enables all communication. To make routing efficient, resilient, and scalable, several aspects must be considered. Care must be taken that traffic is well balanced to make efficient use of the existing network resources, both in failure free operation and in failure scenarios.
Finding the optimal routing in a network is an NP-complete problem. Therefore, routing optimization is usually performed using heuristics. This dissertation shows that a routing optimized with one objective function is often not good when looking at other objective functions. It can even be worse than unoptimized routing with respect to that objective function. After looking at failure-free routing and traffic distribution in different failure scenarios, the analysis is extended to include the loop-free alternate (LFA) IP fast reroute mechanism. Different application scenarios of LFAs are examined and a special focus is set on the fact that LFAs usually cannot protect all traffic in a network even against single link failures. Thus, the routing optimization for LFAs is targeted on both link utilization and failure coverage. Finally, the pre-congestion notification mechanism PCN for network admission control and overload protection is analyzed and optimized. Different design options for implementing the protocol are compared, before algorithms are developed for the calculation and optimization of protocol parameters and PCN-based routing.
The second part of the thesis tackles a routing problem that can only be resolved on a global scale. The scalability of the Internet is at risk since a major and intensifying growth of the interdomain routing tables has been observed. Several protocols and architectures are analyzed that can be used to make interdomain routing more scalable. The most promising approach is the locator/identifier (Loc/ID) split architecture which separates routing from host identification. This way, changes in connectivity, mobility of end hosts, or traffic-engineering activities are hidden from the routing in the core of the Internet and the routing tables can be kept much smaller. All of the currently proposed Loc/ID split approaches have their downsides. In particular, the fact that most architectures use the ID for routing outside the Internet’s core is a poor design, which inhibits many of the possible features of a new routing architecture. To better understand the problems and to provide a solution for a scalable routing design that implements a true Loc/ID split, the new GLI-Split protocol is developed in this thesis, which provides separation of global and local routing and uses an ID that is independent from any routing decisions.
Besides GLI-Split, several other new routing architectures implementing Loc/ID split have been proposed for the Internet. Most of them assume that a mapping system is queried for EID-to-RLOC mappings by an intermediate node at the border of an edge network. When the mapping system is queried by an intermediate node, packets are already on their way towards their destination, and therefore, the mapping system must be fast, scalable, secure, resilient, and should be able to relay packets without locators to nodes that can forward them to the correct destination. The dissertation develops a classification for all proposed mapping system architectures and shows their similarities and differences. Finally, the fast two-level mapping system FIRMS is developed. It includes security and resilience features as well as a relay service for initial packets of a flow when intermediate nodes encounter a cache miss for the EID-to-RLOC mapping.
Object six Degrees of Freedom (6DOF) pose estimation is a fundamental problem in many practical robotic applications, where the target or an obstacle with a simple or complex shape can move fast in cluttered environments. In this thesis, a 6DOF pose estimation algorithm is developed based on the fused data from a time-of-flight camera and a color camera. The algorithm is divided into two stages, an annealed particle filter based coarse pose estimation stage and a gradient decent based accurate pose optimization stage. In the first stage, each particle is evaluated with sparse representation. In this stage, the large inter-frame motion of the target can be well handled. In the second stage, the range data based conventional Iterative Closest Point is extended by incorporating the target appearance information and used for calculating the accurate pose by refining the coarse estimate from the first stage. For dealing with significant illumination variations during the tracking, spherical harmonic illumination modeling is investigated and integrated into both stages. The robustness and accuracy of the proposed algorithm are demonstrated through experiments on various objects in both indoor and outdoor environments. Moreover, real-time performance can be achieved with graphics processing unit acceleration.
In many cases, problems, data, or information can be modeled as graphs. Graphs can be used as a tool for modeling in any case where connections between distinguishable objects occur. Any graph consists of a set of objects, called vertices, and a set of connections, called edges, such that any edge connects a pair of vertices. For example, a social network can be modeled by a graph by
transforming the users of the network into vertices and friendship relations between users into edges. Also physical networks like computer networks or transportation networks, for example, the metro network of a city, can be seen as graphs.
For making graphs and, thereby, the data that is modeled, well-understandable for users, we need a visualization. Graph drawing deals with algorithms for visualizing graphs. In this thesis, especially the use of crossings and curves is investigated for graph drawing problems under additional constraints. The constraints that occur in the problems investigated in this thesis especially restrict the positions of (a part of) the vertices; this is done either as a hard constraint or as an optimization criterion.
Routing is one of the most important issues in any communication network. It defines on which path packets are transmitted from the source of a connection to the destination. It allows to control the distribution of flows between different locations in the network and thereby is a means to influence the load distribution or to reach certain constraints imposed by particular applications. As failures in communication networks appear regularly and cannot be completely avoided, routing is required to be resilient against such outages, i.e., routing still has to be able to forward packets on backup paths even if primary paths are not working any more.
Throughout the years, various routing technologies have been introduced that are very different in their control structure, in their way of working, and in their ability to handle certain failure cases. Each of the different routing approaches opens up their own specific questions regarding configuration, optimization, and inclusion of resilience issues. This monograph investigates, with the example of three particular routing technologies, some concrete issues regarding the analysis and optimization of resilience. It thereby contributes to a better general, technology-independent understanding of these approaches and of their diverse potential for the use in future network architectures.
The first considered routing type, is decentralized intra-domain routing based on administrative IP link costs and the shortest path principle. Typical examples are common today's intra-domain routing protocols OSPF and IS-IS. This type of routing includes automatic restoration abilities in case of failures what makes it in general very robust even in the case of severe network outages including several failed components. Furthermore, special IP-Fast Reroute mechanisms allow for a faster reaction on outages. For routing based on link costs, traffic engineering, e.g. the optimization of the maximum relative link load in the network, can be done indirectly by changing the administrative link costs to adequate values.
The second considered routing type, MPLS-based routing, is based on the a priori configuration of primary and backup paths, so-called Label Switched Paths. The routing layout of MPLS paths offers more freedom compared to IP-based routing as it is not restricted by any shortest path constraints but any paths can be setup. However, this in general involves a higher configuration effort.
Finally, in the third considered routing type, typically centralized routing using a Software Defined Networking (SDN) architecture, simple switches only forward packets according to routing decisions made by centralized controller units. SDN-based routing layouts offer the same freedom as for explicit paths configured using MPLS. In case of a failure, new rules can be setup by the controllers to continue the routing in the reduced topology. However, new resilience issues arise caused by the centralized architecture. If controllers are not reachable anymore, the forwarding rules in the single nodes cannot be adapted anymore. This might render a rerouting in case of connection problems in severe failure scenarios infeasible.
With the introduction of OpenFlow by the Stanford University in 2008, a process began in the area of network research, which questions the predominant approach of fully distributed network control. OpenFlow is a communication protocol that allows the externalization of the network control plane from the network devices, such as a router, and to realize it as a logically-centralized entity in software. For this concept, the term "Software Defined Networking" (SDN) was coined during scientific discourse.
For the network operators, this concept has several advantages. The two most important can be summarized under the points cost savings and flexibility. Firstly, it is possible through the uniform interface for network hardware ("Southbound API"), as implemented by OpenFlow, to combine devices and software from different manufacturers, which increases the innovation and price pressure on them. Secondly, the realization of the network control plane as a freely programmable software with open interfaces ("Northbound API") provides the opportunity to adapt it to the individual circumstances of the operator's network and to exchange information with the applications it serves. This allows the network to be more flexible and to react more quickly to changing circumstances as well as transport the traffic more effectively and tailored to the user’s "Quality of Experience" (QoE).
The approach of a separate network control layer for packet-based networks is not new and has already been proposed several times in the past. Therefore, the SDN approach has raised many questions about its feasibility in terms of efficiency and applicability. These questions are caused to some extent by the fact that there is no generally accepted definition of the SDN concept to date. It is therefore a part of this thesis to derive such a definition. In addition, several of the open issues are investigated. This Investigations follow the three aspects: Performance Evaluation of Software Defined Networking, applications on the SDN control layer, and the usability of SDN Northbound-API for creation application-awareness in network operation.
Performance Evaluation of Software Defined Networking: The question of the efficiency of an SDN-based system was from the beginning one of the most important. In this thesis, experimental measurements of the performance of OpenFlow-enabled switch hardware and control software were conducted for the purpose of answering this question. The results of these measurements were used as input parameters for establishing an analytical model of the reactive SDN approach. Through the model it could be determined that the performance of the software control layer, often called "Controller", is crucial for the overall performance of the system, but that the approach is generally viable. Based on this finding a software for analyzing the performance of SDN controllers was developed. This software allows the emulation of the forwarding layer of an SDN network towards the control software and can thus determine its performance in different situations and configurations. The measurements with this software showed that there are quite significant differences in the behavior of different control software implementations. Among other things it has been shown that some show different characteristics for various switches, in particular in terms of message processing speed. Under certain circumstances this can lead to network failures.
Applications on the SDN control layer: The core piece of software defined networking are the intelligent network applications that operate on the control layer. However, their development is still in its infancy and little is known about the technical possibilities and their limitations. Therefore, the relationship between an SDN-based and classical implementation of a network function is investigated in this thesis. This function is the monitoring of network links and the traffic they carry. A typical approach for this task has been built based on Wiretapping and specialized measurement hardware and compared with an implementation based on OpenFlow switches and a special SDN control application. The results of the comparison show that the SDN version can compete in terms of measurement accuracy for bandwidth and delay estimation with the traditional measurement set-up. However, a compromise has to be found for measurements below the millisecond range.
Another question regarding the SDN control applications is whether and how well they can solve existing problems in networks. Two programs have been developed based on SDN in this thesis to solve two typical network issues. Firstly, the tool "IPOM", which enables considerably more flexibility in the study of effects of network structures for a researcher, who is confined to a fixed physical test network topology.
The second software provides an interface between the Cloud Orchestration Software "OpenNebula" and an OpenFlow controller. The purpose of this software was to investigate experimentally whether a pre-notification of the network of an impending relocation of a virtual service in a data center is sufficient to ensure the continuous operation of that service. This was demonstrated on the example of a video service.
Usability of the SDN Northbound API for creating application-awareness in network operation: Currently, the fact that the network and the applications that run on it are developed and operated separately leads to problems in network operation. SDN offers with the Northbound-API an open interface that enables the exchange between information of both worlds during operation. One aim of this thesis was to investigate whether this interface can be exploited so that the QoE experienced by the user can be maintained on high level. For this purpose, the QoE influence factors were determined on a challenging application by means of a subjective survey study. The application is cloud gaming, in which the calculation of video game environments takes place in the cloud and is transported via video over the network to the user. It was shown that apart from the most important factor influencing QoS, i.e., packet loss on the downlink, also the type of game type and its speed play a role. This demonstrates that in addition to QoS the application state is important and should be communicated to the network. Since an implementation of such a state conscious SDN for the example of Cloud Gaming was not possible due to its proprietary implementation, in this thesis the application “YouTube video streaming” was chosen as an alternative. For this application, status information is retrievable via the "Yomo" tool and can be used for network control. It was shown that an SDN-based implementation of an application-aware network has distinct advantages over traditional network management methods and the user quality can be obtained in spite of disturbances.
Today’s Internet architecture was not designed from scratch but was driven by new services that emerged during its development. Hence, it is often described as patchwork where additional patches are applied in case new services require modifications to the existing architecture. This process however is rather slow and hinders the development of innovative network services with certain architecture or network requirements. Currently discussed technologies like Software-Defined Networking (SDN) or Network Virtualization (NV) are seen as key enabling technologies to overcome this rigid best effort legacy of the Internet. Both technologies offer the possibility to create virtual networks that accommodate the specific needs of certain services. These logical networks are operated on top of a physical substrate and facilitate flexible network resource allocation as physical resources can be added and removed depending on the current network and load situation. In addition, the clear separation and isolation of networks foster the development of application-aware networks that fulfill the special requirements of emerging applications. A prominent use case that benefits from these extended capabilities of the network is denoted with service component mobility. Services hosted on Virtual Machines (VMs) follow their consuming mobile endpoints, so that access latency as well as consumed network resources are reduced. Especially for applications like video streaming, which consume a large fraction of the available resources, is this an important means to relieve the resource constraints and eventually provide better service quality. Service and endpoint mobility both allow an adaptation of the used paths between an offered service, i.e., video streaming and the consuming users in case the service quality drops due to network problems. To make evidence-based adaptations in case of quality drops, a scalable monitoring component is required that is able to monitor the service quality for video streaming applications with reliable accuracy. This monograph details challenges that arise when deploying a certain service, i.e., video streaming, in a future virtualized network architecture and discusses possible solutions. In particular, this work evaluates the performance of mechanisms enabling service mobility and presents an optimized architecture for service mobility. Concerning endpoint mobility, improvements are developed that reduce the latency between endpoints and consumed services and ensure connectivity regardless of the used mobile access network. In the last part, a network-based video quality monitoring solution is developed and its accuracy is evaluated.
Radiation therapy today, on account of improvements in treatment procedures over the last 60 years, allows precise treatment of static tumors inside the human body. However, irradiation of moving tumors is still a challenging task as moving tumors often leave the treatment beam and the radiation dose delivered to the tumor reduces simultaneously increasing that on healthy tissue. This research work aims to push the frontiers of radiation therapy in order to enable precise treatment of moving tumors with focus on research and development of a unique real-time system enabling active motion compensation through robotic means to compensate tumor motion. During treatment, patients lie on a treatment couch which is normally used for static position corrections of patient set-up errors prior to radiation treatment. The treatment couch used, called HexaPOD, is a parallel manipulator with six degrees of freedom which can precisely position heavy loads inside a small region. Despite the HexaPOD not initially built with dynamics in mind, it is used in this work for sustained motion compensation by moving patients such that tumors stay precisely located at the center of the treatment beam during the complete course of treatment. In order to realize real-time tumor motion compensation by means of the HexaPOD, several challanges need to be addressed. Real-time aspects are covered by the adoption of a hard real-time operation system in combination with measurement and estimation of latencies of all physical quantities in the compensation system such as tumor or breathing position measurements. Accurate timing information is respected consistently in the whole system and all software-induced latencies are adaptively compensated for. This requires knowledge of future tumor positions from predictors. Several predictors for breathing and tumor motion predictions are proposed and evaluated in terms of a variety of different performance metrics. Extensions to prediction algorithms are introduced fusing both breathing and tumor position information to allow for predictions without the need of an explicit correlation model. Predictions determine the future motion path of the HexaPOD in order to compensate for tumor motion. Several control schemes are developed to enable reference tracking for the HexaPOD. Based on linear and non-linear dynamic modelling of the HexaPOD with system identification methods, a first controller is derived in the form of a model predictive controller. A second controller is proposed based on an assumption of the working principle of the HexaPOD's internal controller. Finally, a third controller is derived as combination of the first and second one. For each of these controllers, comparative results with real hardware experiments and humans in the loop as well as choices of free parameters are presented and discussed. Apart from precise tracking, emphasis is placed on patient comfort which is of crucial importance for acceptance of the system. It is demonstrated that smooth trajectories can be realized by the controllers to guarantee that patients feel comfortable while their tumor motion is compensated at sub-millimeter accuracies. Overall errors of the system are analyzed by relating them to tracking and prediction errors. By exploiting the properties of different predictors, it is shown that the startup time until tracking is reached can be reduced to only a few seconds, even in the case of an initially at-rest HexaPOD and with no initial knowledge of tumor motion. This makes the system especially suitable for the relatively short-fractionated treatment sessions for lung tumors. The tumor motion compensation system has been developed solely based on standard clinical hardware, found in most treatment rooms. With a simple and flexible design, existing treatment can be updated in a cost-efficient way to introduce motion compensation capabilities. Simultaneously, the system does not impose any constraints on state-of-the-art treatment types such as intensity modulated radiotherapy or volumetric modulated arc therapy. Supporting different compensation modes, the system can be applied to any moving tumor whether its motion is predictable (lung tumors) or unpredictable (prostate tumors). By integration of adequate tumor position determination methods, the system can be easily extended to other tumors as well.
This work takes a close look at several quite different research areas related to the design of networked embedded sensor/actuator systems. The variety of the topics illustrates the potential complexity of current sensor network applications; especially when enriched with actuators for proactivity and environmental interaction. Besides their conception, development, installation and long-term operation, we'll mainly focus on more "low-level" aspects: Compositional hardware and software design, task cooperation and collaboration, memory management, and real-time operation will be addressed from a local node perspective. In contrast, inter-node synchronization, communication, as well as sensor data acquisition, aggregation, and fusion will be discussed from a rather global network view. The diversity in the concepts was intentionally accepted to finally facilitate the reliable implementation of truly complex systems. In particular, these should go beyond the usual "sense and transmit of sensor data", but show how powerful today's networked sensor/actuator systems can be despite of their low computational performance and constrained hardware: If their resources are only coordinated efficiently!
The work presents a performance evaluation and optimization of so-called overlay networks for content distribution in the Internet. Chapter 1 describes the importance which have such networks in today's Internet, for example, for the transmission of video content. The focus of this work is on overlay networks based on the peer-to-peer principle. These are characterized by the fact that users who download content, also contribute to the distribution process by sharing parts of the data to other users. This enables efficient content distribution because each user not only consumes resources in the system, but also provides its own resources. Chapter 2 of the monograph contains a detailed description of the functionality of today's most popular overlay network BitTorrent. It explains the various components and their interaction. This is followed by an illustration of why such overlay networks for Internet service providers (ISPs) are problematic. The reason lies in the large amount of inter-ISP traffic that is produced by these overlay networks. Since this inter-ISP traffic leads to high costs for ISPs, they try to reduce it by improved mechanisms for overlay networks. One optimization approach is the use of topology awareness within the overlay networks. It provides users of the overlay networks with information about the underlying physical network topology. This allows them to avoid inter-ISP traffic by exchanging data preferrentially with other users that are connected to the same ISP. Another approach to save inter-ISP traffic is caching. In this case the ISP provides additional computers in its network, called caches, which store copies of popular content. The users of this ISP can then obtain such content from the cache. This prevents that the content must be retrieved from locations outside of the ISP's network, and saves costly inter-ISP traffic in this way. In the third chapter of the thesis, the results of a comprehensive measurement study of overlay networks, which can be found in today's Internet, are presented. After a short description of the measurement methodology, the results of the measurements are described. These results contain data on a variety of characteristics of current P2P overlay networks in the Internet. These include the popularity of content, i.e., how many users are interested in specific content, the evolution of the popularity and the size of the files. The distribution of users within the Internet is investigated in detail. Special attention is given to the number of users that exchange a particular file within the same ISP. On the basis of these measurement results, an estimation of the traffic savings that can achieved by topology awareness is derived. This new estimation is of scientific and practical importance, since it is not limited to individual ISPs and files, but considers the whole Internet and the total amount of data exchanged in overlay networks. Finally, the characteristics of regional content are considered, in which the popularity is limited to certain parts of the Internet. This is for example the case of videos in German, Italian or French language. Chapter 4 of the thesis is devoted to the optimization of overlay networks for content distribution through caching. It presents a deterministic flow model that describes the influence of caches. On the basis of this model, it derives an estimate of the inter-ISP traffic that is generated by an overlay network, and which part can be saved by caches. The results show that the influence of the cache depends on the structure of the overlay networks, and that caches can also lead to an increase in inter-ISP traffic under certain circumstances. The described model is thus an important tool for ISPs to decide for which overlay networks caches are useful and to dimension them. Chapter 5 summarizes the content of the work and emphasizes the importance of the findings. In addition, it explains how the findings can be applied to the optimization of future overlay networks. Special attention is given to the growing importance of video-on-demand and real-time video transmissions.
Internet applications are becoming more and more flexible to support diverge user demands and network conditions. This is reflected by technical concepts, which provide new adaptation mechanisms to allow fine grained adjustment of the application quality and the corresponding bandwidth requirements. For the case of video streaming, the scalable video codec H.264/SVC allows the flexible adaptation of frame rate, video resolution and image quality with respect to the available network resources. In order to guarantee a good user-perceived quality (Quality of Experience, QoE) it is necessary to adjust and optimize the video quality accurately. But not only have the applications of the current Internet changed. Within network and transport, new technologies evolved during the last years providing a more flexible and efficient usage of data transport and network resources. One of the most promising technologies is Network Virtualization (NV) which is seen as an enabler to overcome the ossification of the Internet stack. It provides means to simultaneously operate multiple logical networks which allow for example application-specific addressing, naming and routing, or their individual resource management. New transport mechanisms like multipath transmission on the network and transport layer aim at an efficient usage of available transport resources. However, the simultaneous transmission of data via heterogeneous transport paths and communication technologies inevitably introduces packet reordering. Additional mechanisms and buffers are required to restore the correct packet order and thus to prevent a disturbance of the data transport. A proper buffer dimensioning as well as the classification of the impact of varying path characteristics like bandwidth and delay require appropriate evaluation methods. Additionally, for a path selection mechanism real time evaluation mechanisms are needed. A better application-network interaction and the corresponding exchange of information enable an efficient adaptation of the application to the network conditions and vice versa. This PhD thesis analyzes a video streaming architecture utilizing multipath transmission and scalable video coding and develops the following optimization possibilities and results: Analysis and dimensioning methods for multipath transmission, quantification of the adaptation possibilities to the current network conditions with respect to the QoE for H.264/SVC, and evaluation and optimization of a future video streaming architecture, which allows a better interaction of application and network.
Die Entwicklung eines wissensbasierten Systems, speziell eines Diagnosesystems, ist eine Teildisziplin der künstlichen Intelligenz und angewandten Informatik. Im Laufe der Forschung auf diesem Gebiet wurden verschiedene Lösungsansätze mit unterschiedlichem Erfolg bei der Anwendung in der Kraftfahrzeugdiagnose entwickelt. Diagnosesysteme in Vertragswerkstätten, das heißt in Fahrzeughersteller gebundenen Werkstätten, wenden hauptsächlich die fallbasierte Diagnostik an. Zum einen hält sich hier die Fahrzeugvielfalt in Grenzen und zum anderen besteht eine Meldepflicht bei neuen, nicht im System vorhandenen Fällen. Die freien Werkstätten verfügen nicht über eine solche Datenbank. Somit ist der fallbasierte Ansatz schwer umsetzbar. In freien Werkstätten - Fahrzeughersteller unabhängigen Werkstätten - basiert die Fehlersuche hauptsächlich auf Fehlerbäumen. Wegen der wachsenden Fahrzeugkomplexität, welche wesentlich durch die stark zunehmende Anzahl der durch mechatronische Systeme realisierten Funktionen bedingt ist, und der steigenden Typenvielfalt ist die geführte Fehlersuche in freien Werkstätten nicht immer zielführend. Um die Unterstützung des Personals von freien Werkstätten bei der zukünftigen Fehlersuche zu gewährleisten, werden neue Generationen von herstellerunabhängigen Diagnosetools benötigt, die die Probleme der Variantenvielfalt und Komplexität lösen. In der vorliegenden Arbeit wird ein Lösungsansatz vorgestellt, der einen qualitativen, modellbasierten Diagnoseansatz mit einem auf heuristischem Diagnosewissen basierenden Ansatz vereint. Neben der Grundlage zur Wissenserhebung werden in dieser Arbeit die theoretische Grundlage zur Beherrschung der Variantenvielfalt sowie die Tests für die erstellten Diagnosemodelle behandelt. Die Diagnose ist symptombasiert und die Inferenzmechanismen zur Verarbeitung des Diagnosewissens sind eine Kombination aus Propagierung der abweichenden physikalischen Größen im Modell und der Auswertung des heuristischen Wissens. Des Weiteren werden in dieser Arbeit verschiedene Aspekte der Realisierung der entwickelten theoretischen Grundlagen dargestellt, zum Beispiel: Systemarchitektur, Wissenserhebungsprozess, Ablauf des Diagnosevorgangs in den Werkstätten. Die Evaluierung der entwickelten Lösung bei der Wissenserhebung in Form von Modellerstellungen und Modellierungsworkshops sowie Feldtests dient nicht nur zur Bestätigung des entwickelten Ansatzes, sondern auch zur Ideenfindung für die Integration der entwickelten Tools in die existierende IT-Infrastruktur.