004 Datenverarbeitung; Informatik
Refine
Has Fulltext
- yes (75)
Is part of the Bibliography
- yes (75)
Year of publication
Document Type
- Doctoral Thesis (75) (remove)
Keywords
- Leistungsbewertung (13)
- Robotik (8)
- Mobiler Roboter (7)
- Autonomer Roboter (6)
- Komplexitätstheorie (5)
- Optimierung (5)
- Simulation (5)
- Theoretische Informatik (5)
- Modellierung (4)
- Netzwerk (4)
Institute
- Institut für Informatik (75) (remove)
Schriftenreihe
Sonstige beteiligte Institutionen
With the introduction of OpenFlow by the Stanford University in 2008, a process began in the area of network research, which questions the predominant approach of fully distributed network control. OpenFlow is a communication protocol that allows the externalization of the network control plane from the network devices, such as a router, and to realize it as a logically-centralized entity in software. For this concept, the term "Software Defined Networking" (SDN) was coined during scientific discourse.
For the network operators, this concept has several advantages. The two most important can be summarized under the points cost savings and flexibility. Firstly, it is possible through the uniform interface for network hardware ("Southbound API"), as implemented by OpenFlow, to combine devices and software from different manufacturers, which increases the innovation and price pressure on them. Secondly, the realization of the network control plane as a freely programmable software with open interfaces ("Northbound API") provides the opportunity to adapt it to the individual circumstances of the operator's network and to exchange information with the applications it serves. This allows the network to be more flexible and to react more quickly to changing circumstances as well as transport the traffic more effectively and tailored to the user’s "Quality of Experience" (QoE).
The approach of a separate network control layer for packet-based networks is not new and has already been proposed several times in the past. Therefore, the SDN approach has raised many questions about its feasibility in terms of efficiency and applicability. These questions are caused to some extent by the fact that there is no generally accepted definition of the SDN concept to date. It is therefore a part of this thesis to derive such a definition. In addition, several of the open issues are investigated. This Investigations follow the three aspects: Performance Evaluation of Software Defined Networking, applications on the SDN control layer, and the usability of SDN Northbound-API for creation application-awareness in network operation.
Performance Evaluation of Software Defined Networking: The question of the efficiency of an SDN-based system was from the beginning one of the most important. In this thesis, experimental measurements of the performance of OpenFlow-enabled switch hardware and control software were conducted for the purpose of answering this question. The results of these measurements were used as input parameters for establishing an analytical model of the reactive SDN approach. Through the model it could be determined that the performance of the software control layer, often called "Controller", is crucial for the overall performance of the system, but that the approach is generally viable. Based on this finding a software for analyzing the performance of SDN controllers was developed. This software allows the emulation of the forwarding layer of an SDN network towards the control software and can thus determine its performance in different situations and configurations. The measurements with this software showed that there are quite significant differences in the behavior of different control software implementations. Among other things it has been shown that some show different characteristics for various switches, in particular in terms of message processing speed. Under certain circumstances this can lead to network failures.
Applications on the SDN control layer: The core piece of software defined networking are the intelligent network applications that operate on the control layer. However, their development is still in its infancy and little is known about the technical possibilities and their limitations. Therefore, the relationship between an SDN-based and classical implementation of a network function is investigated in this thesis. This function is the monitoring of network links and the traffic they carry. A typical approach for this task has been built based on Wiretapping and specialized measurement hardware and compared with an implementation based on OpenFlow switches and a special SDN control application. The results of the comparison show that the SDN version can compete in terms of measurement accuracy for bandwidth and delay estimation with the traditional measurement set-up. However, a compromise has to be found for measurements below the millisecond range.
Another question regarding the SDN control applications is whether and how well they can solve existing problems in networks. Two programs have been developed based on SDN in this thesis to solve two typical network issues. Firstly, the tool "IPOM", which enables considerably more flexibility in the study of effects of network structures for a researcher, who is confined to a fixed physical test network topology.
The second software provides an interface between the Cloud Orchestration Software "OpenNebula" and an OpenFlow controller. The purpose of this software was to investigate experimentally whether a pre-notification of the network of an impending relocation of a virtual service in a data center is sufficient to ensure the continuous operation of that service. This was demonstrated on the example of a video service.
Usability of the SDN Northbound API for creating application-awareness in network operation: Currently, the fact that the network and the applications that run on it are developed and operated separately leads to problems in network operation. SDN offers with the Northbound-API an open interface that enables the exchange between information of both worlds during operation. One aim of this thesis was to investigate whether this interface can be exploited so that the QoE experienced by the user can be maintained on high level. For this purpose, the QoE influence factors were determined on a challenging application by means of a subjective survey study. The application is cloud gaming, in which the calculation of video game environments takes place in the cloud and is transported via video over the network to the user. It was shown that apart from the most important factor influencing QoS, i.e., packet loss on the downlink, also the type of game type and its speed play a role. This demonstrates that in addition to QoS the application state is important and should be communicated to the network. Since an implementation of such a state conscious SDN for the example of Cloud Gaming was not possible due to its proprietary implementation, in this thesis the application “YouTube video streaming” was chosen as an alternative. For this application, status information is retrievable via the "Yomo" tool and can be used for network control. It was shown that an SDN-based implementation of an application-aware network has distinct advantages over traditional network management methods and the user quality can be obtained in spite of disturbances.
Die Dissertation befaßt sich mit der Entwicklung einer multimedialen, datenbankgestützten Lehr- und Lernplattform. Die entwickelten Module ermöglichen und erweitern nicht nur die Möglichkeit des Selbststudiums für den Studenten sondern erleichtern auch die Arbeit der Dozenten. Außerdem wird auch die Zusammenarbeit und der Austausch von Lernobjekten zwischen verschiedenen Institutionen ermöglicht. In der Lehr- und Lernplattform können verschiedene Lernobjekt-Typen verwaltet werden. Exemplarisch wurden die Typen Bilder, 3D-Animationen, Vorlesungen, Lerntexte, Fallbeispiele und Quizelemente integriert. Die Lehr- und Lernplattform besteht aus drei Bausteinen: 1. In der Lernobjekt-Datenbank werden alle Lernobjekt-Typen und Lernobjekte verwaltet. 2. Autorenwerkzeuge dienen zur Erstellung von Lernobjekten. 3. In der Lernplattform werden die Lernobjekte den Studenten zum (Selbst-)Lernen präsentiert. Neben den Vorteilen, die der Einsatz von E-Learning im allgemeinen bietet, wie die flexible Lernorganisation oder die Nutzung von Lerninhalten unabhängig von Ort und Zeit, zeichnet sich die entwickelte Lehr- und Lernplattform besonders durch folgende Punkte aus: Generierung von Lerninhalten höherer Qualität durch multizentrische Expertenbündelung und Arbeitsteilung, Erweiterbarkeit auf andere, neue Lernobjekt-Typen, Verwaltbarkeit, Konsistenz, Flexibilität, geringer Verwaltungsaufwand, Navigationsmöglichkeiten für den Studenten, Personalisierbarkeit und Konformität zu internationalen Standards. Sowohl bei der Modellierung als auch bei der Umsetzung wurde darauf geachtet, möglichst gut die Anforderungen der Dermatologie bei gleichzeitiger Erweiterbarkeit auf andere, ähnliche Szenarien zu erfüllen. Besonders einfach sollte die Anpassung der Plattform für andere bildorientierte Disziplinen sein.
In future telecommunication systems, we observe an increasing diversity of access networks. The separation of transport services and applications or services leads to multi-network services, i.e., a future service has to work transparently to the underlying network infrastructure. Multi-network services with edge-based intelligence, like P2P file sharing or the Skype VoIP service, impose new traffic control paradigms on the future Internet. Such services adapt the amount of consumed bandwidth to reach different goals. A selfish behavior tries to keep the QoE of a single user above a certain level. Skype, for instance, repeats voice samples depending on the perceived end-to-end loss. From the viewpoint of a single user, the replication of voice data overcomes the degradation caused by packet loss and enables to maintain a certain QoE. The cost for this achievement is a higher amount of consumed bandwidth. However, if the packet loss is caused by congestion in the network, this additionally required bandwidth even worsens the network situation. Altruistic behavior, on the other side, would reduce the bandwidth consumption in such a way that the pressure on the network is released and thus the overall network performance is improved. In this monograph, we analyzed the impact of the overlay, P2P, and QoE paradigms in future Internet applications and the interactions from the observing user behavior. The shift of intelligence toward the edge is accompanied by a change in the emerging user behavior and traffic profile, as well as a change from multi-service networks to multi-networks services. In addition, edge-based intelligence may lead to a higher dynamics in the network topology, since the applications are often controlled by an overlay network, which can rapidly change in size and structure as new nodes can leave or join the overlay network in an entirely distributed manner. As a result, we found that the performance evaluation of such services provides new challenges, since novel key performance factors have to be first identified, like pollution of P2P systems, and appropriate models of the emerging user behavior are required, e.g. taking into account user impatience. As common denominator of the presented studies in this work, we focus on a user-centric view when evaluating the performance of future Internet applications. For a subscriber of a certain application or service, the perceived quality expressed as QoE will be the major criterion of the user's satisfaction with the network and service providers. We selected three different case studies and characterized the application's performance from the end user's point of view. Those are (1) cooperation in mobile P2P file sharing networks, (2) modeling of online TV recording services, and (3) QoE of edge-based VoIP applications. The user-centric approach facilitates the development of new mechanisms to overcome problems arising from the changing user behavior. An example is the proposed CycPriM cooperation strategy, which copes with selfish user behavior in mobile P2P file sharing system. An adequate mechanism has also been shown to be efficient in a heterogeneous B3G network with mobile users conducting vertical handovers between different wireless access technologies. The consideration of the user behavior and the user perceived quality guides to an appropriate modeling of future Internet applications. In the case of the online TV recording service, this enables the comparison between different technical realizations of the system, e.g. using server clusters or P2P technology, to properly dimension the installed network elements and to assess the costs for service providers. Technologies like P2P help to overcome phenomena like flash crowds and improve scalability compared to server clusters, which may get overloaded in such situations. Nevertheless, P2P technology invokes additional challenges and different user behavior to that seen in traditional client/server systems. Beside the willingness to share files and the churn of users, peers may be malicious and offer fake contents to disturb the data dissemination. Finally, the understanding and the quantification of QoE with respect to QoS degradations permits designing sophisticated edge-based applications. To this end, we identified and formulated the IQX hypothesis as an exponential interdependency between QoE and QoS parameters, which we validated for different examples. The appropriate modeling of the emerging user behavior taking into account the user's perceived quality and its interactions with the overlay and P2P paradigm will finally help to design future Internet applications.
3D point clouds are a de facto standard for 3D documentation and modelling. The advances in laser scanning technology broadens the usability and access to 3D measurement systems. 3D point clouds are used in many disciplines such as robotics, 3D modelling, archeology and surveying. Scanners are able to acquire up to a million of points per second to represent the environment with a dense point cloud. This represents the captured environment with a very high degree of detail. The combination of laser scanning technology with photography adds color information to the point clouds. Thus the environment is represented more realistically. Full 3D models of environments, without any occlusion, require multiple scans. Merging point clouds is a challenging process. This thesis presents methods for point cloud registration based on the panorama images generated from the scans. Image representation of point clouds introduces 2D image processing methods to 3D point clouds. Several projection methods for the generation of panorama maps of point clouds are presented in this thesis. Additionally, methods for point cloud reduction and compression based on the panorama maps are proposed. Due to the large amounts of data generated from the 3D measurement systems these methods are necessary to improve the point cloud processing, transmission and archiving. This thesis introduces point cloud processing methods as a novel framework for the digitisation of archeological excavations. The framework replaces the conventional documentation methods for excavation sites. It employs point clouds for the generation of the digital documentation of an excavation with the help of an archeologist on-site. The 3D point cloud is used not only for data representation but also for analysis and knowledge generation. Finally, this thesis presents an autonomous indoor mobile mapping system. The mapping system focuses on the sensor placement planning method. Capturing a complete environment requires several scans. The sensor placement planning method solves for the minimum required scans to digitise large environments. Combining this method with a navigation system on a mobile robot platform enables it to acquire data fully autonomously. This thesis introduces a novel hole detection method for point clouds to detect obscured parts of a captured environment. The sensor placement planning method selects the next scan position with the most coverage of the obscured environment. This reduces the required number of scans. The navigation system on the robot platform consist of path planning, path following and obstacle avoidance. This guarantees the safe navigation of the mobile robot platform between the scan positions. The sensor placement planning method is designed as a stand alone process that could be used with a mobile robot platform for autonomous mapping of an environment or as an assistant tool for the surveyor on scanning projects.
This thesis deals with the management and analysis of source code, which is represented in XML. Using the elementary methods of the XML repository, the XML source code representation is accessed, changed, updated, and saved. We reason about the source code, refactor source code and we visualize dependency graphs for call analysis. The visualized dependencies between files, modules, or packages are used to structure the source code in order to get a system, which is easily to comprehend, to modify and to complete. Sophisticated methods have been developed to slice the source code in order to obtain a working package of a large system, containing only a specific functionality. The basic methods, on which the visualizations and analyses are built on can be changed like changing a plug-in. The visualization methods can be reused in order to handle arbitrary source code representations, e.g., JAML, PHPML, PROLOGML. Dependencies of other context can be visualized, too, e.g., ER diagrams, or website references. The tool SCAV supports source code visualization and analyzing methods.
Routing is one of the most important issues in any communication network. It defines on which path packets are transmitted from the source of a connection to the destination. It allows to control the distribution of flows between different locations in the network and thereby is a means to influence the load distribution or to reach certain constraints imposed by particular applications. As failures in communication networks appear regularly and cannot be completely avoided, routing is required to be resilient against such outages, i.e., routing still has to be able to forward packets on backup paths even if primary paths are not working any more.
Throughout the years, various routing technologies have been introduced that are very different in their control structure, in their way of working, and in their ability to handle certain failure cases. Each of the different routing approaches opens up their own specific questions regarding configuration, optimization, and inclusion of resilience issues. This monograph investigates, with the example of three particular routing technologies, some concrete issues regarding the analysis and optimization of resilience. It thereby contributes to a better general, technology-independent understanding of these approaches and of their diverse potential for the use in future network architectures.
The first considered routing type, is decentralized intra-domain routing based on administrative IP link costs and the shortest path principle. Typical examples are common today's intra-domain routing protocols OSPF and IS-IS. This type of routing includes automatic restoration abilities in case of failures what makes it in general very robust even in the case of severe network outages including several failed components. Furthermore, special IP-Fast Reroute mechanisms allow for a faster reaction on outages. For routing based on link costs, traffic engineering, e.g. the optimization of the maximum relative link load in the network, can be done indirectly by changing the administrative link costs to adequate values.
The second considered routing type, MPLS-based routing, is based on the a priori configuration of primary and backup paths, so-called Label Switched Paths. The routing layout of MPLS paths offers more freedom compared to IP-based routing as it is not restricted by any shortest path constraints but any paths can be setup. However, this in general involves a higher configuration effort.
Finally, in the third considered routing type, typically centralized routing using a Software Defined Networking (SDN) architecture, simple switches only forward packets according to routing decisions made by centralized controller units. SDN-based routing layouts offer the same freedom as for explicit paths configured using MPLS. In case of a failure, new rules can be setup by the controllers to continue the routing in the reduced topology. However, new resilience issues arise caused by the centralized architecture. If controllers are not reachable anymore, the forwarding rules in the single nodes cannot be adapted anymore. This might render a rerouting in case of connection problems in severe failure scenarios infeasible.
This work focuses on coordination methods and the control of motion in groups of nonholonomic wheeled mobile robots, in particular of the car-like type. These kind of vehicles are particularly restricted in their mobility. In the main part of this work the two problems of formation motion coordination and of rendezvous in distributed multi-vehicle systems are considered. We introduce several enhancements to an existing motion planning approach for formations of nonholonomic mobile robots. Compared to the original method, the extended approach is able to handle time-varying reference speeds as well as adjustments of the formation's shape during reference trajectory segments with continuously differentiable curvature. Additionally, undesired discontinuities in the speed and steering profiles of the vehicles are avoided. Further, the scenario of snow shoveling on an airfield by utilizing multiple formations of autonomous snowplows is discussed. We propose solutions to the subproblems of motion planning for the formations and tracking control for the individual vehicles. While all situations that might occur have been tested in a simulation environment, we also verified the developed tracking controller in real robot hardware experiments. The task of the rendezvous problem in groups of car-like robots is to drive all vehicles to a common position by means of decentralized control laws. Typically there exists no direct interaction link between all of the vehicles. In this work we present decentralized rendezvous control laws for vehicles with free and with bounded steering. The convergence properties of the approaches are analyzed by utilizing Lyapunov based techniques. Furthermore, they are evaluated within various simulation experiments, while the bounded steering case is also verified within laboratory hardware experiments. Finally we introduce a modification to the bounded steering system that increases the convergence speed at the expense of a higher traveled distance of the vehicles.
Radiation therapy today, on account of improvements in treatment procedures over the last 60 years, allows precise treatment of static tumors inside the human body. However, irradiation of moving tumors is still a challenging task as moving tumors often leave the treatment beam and the radiation dose delivered to the tumor reduces simultaneously increasing that on healthy tissue. This research work aims to push the frontiers of radiation therapy in order to enable precise treatment of moving tumors with focus on research and development of a unique real-time system enabling active motion compensation through robotic means to compensate tumor motion. During treatment, patients lie on a treatment couch which is normally used for static position corrections of patient set-up errors prior to radiation treatment. The treatment couch used, called HexaPOD, is a parallel manipulator with six degrees of freedom which can precisely position heavy loads inside a small region. Despite the HexaPOD not initially built with dynamics in mind, it is used in this work for sustained motion compensation by moving patients such that tumors stay precisely located at the center of the treatment beam during the complete course of treatment. In order to realize real-time tumor motion compensation by means of the HexaPOD, several challanges need to be addressed. Real-time aspects are covered by the adoption of a hard real-time operation system in combination with measurement and estimation of latencies of all physical quantities in the compensation system such as tumor or breathing position measurements. Accurate timing information is respected consistently in the whole system and all software-induced latencies are adaptively compensated for. This requires knowledge of future tumor positions from predictors. Several predictors for breathing and tumor motion predictions are proposed and evaluated in terms of a variety of different performance metrics. Extensions to prediction algorithms are introduced fusing both breathing and tumor position information to allow for predictions without the need of an explicit correlation model. Predictions determine the future motion path of the HexaPOD in order to compensate for tumor motion. Several control schemes are developed to enable reference tracking for the HexaPOD. Based on linear and non-linear dynamic modelling of the HexaPOD with system identification methods, a first controller is derived in the form of a model predictive controller. A second controller is proposed based on an assumption of the working principle of the HexaPOD's internal controller. Finally, a third controller is derived as combination of the first and second one. For each of these controllers, comparative results with real hardware experiments and humans in the loop as well as choices of free parameters are presented and discussed. Apart from precise tracking, emphasis is placed on patient comfort which is of crucial importance for acceptance of the system. It is demonstrated that smooth trajectories can be realized by the controllers to guarantee that patients feel comfortable while their tumor motion is compensated at sub-millimeter accuracies. Overall errors of the system are analyzed by relating them to tracking and prediction errors. By exploiting the properties of different predictors, it is shown that the startup time until tracking is reached can be reduced to only a few seconds, even in the case of an initially at-rest HexaPOD and with no initial knowledge of tumor motion. This makes the system especially suitable for the relatively short-fractionated treatment sessions for lung tumors. The tumor motion compensation system has been developed solely based on standard clinical hardware, found in most treatment rooms. With a simple and flexible design, existing treatment can be updated in a cost-efficient way to introduce motion compensation capabilities. Simultaneously, the system does not impose any constraints on state-of-the-art treatment types such as intensity modulated radiotherapy or volumetric modulated arc therapy. Supporting different compensation modes, the system can be applied to any moving tumor whether its motion is predictable (lung tumors) or unpredictable (prostate tumors). By integration of adequate tumor position determination methods, the system can be easily extended to other tumors as well.
Verteilte dynamische Systeme unter lokalen und globalen Gesichtspunkten zu optimieren ist eine schwierige Aufgabe. Zwar sind grundsätzliche Auswirkungen einzelner Maßnahmen häufig bekannt, durch widerstrebende Ziele, Wechselwirkungen zwischen Prozessen und Nebenwirkungen von Maßnahmen ist ein analytisches Vorgehen bei der Optimierung nicht möglich. Besonders schwierig wird es, wenn lokale Einheiten einerseits ihre Ziele und Autonomie behalten sollen, aber durch zentrale Vorgaben bzw. Anreize so gesteuert werden sollen, dass ein übergeordnetes Ziel erreicht wird. Ein praktisches Beispiel dieses allgemeinen Optimierungsproblems findet sich im Gesundheitswesen. Das Management von modernen Kliniken ist stets mit dem Problem konfrontiert, die Qualität der Pflege zu gewährleisten und gleichzeitig kosteneffizient zu arbeiten. Hier gilt es unter gegeben Rahmenbedingungen und bei Respektierung der Autonomie der Funktionseinheiten, Optimierungsmaßnahmen zu finden und durchzuführen. Vorhandene Werkzeuge zur Simulation und Modellierung bieten für diese Aufgabe keine ausreichend guten Vorgehensmodelle und Modellierungsmechanismen. Die agentenbasierte Simulation ermöglicht die Abbildung solcher Systeme und die Durchführung von Simulationsexperimenten zur Bewertung einzelner Maßnahmen. Es werden Lösungswege und Werkzeuge vorgestellt und evaluiert, die den Benutzer bei der Formalisierung des Wissens und der Modellierung solch komplexer Szenarien unterstützen und ein systematisches Vorgehen zur Optimierung ermöglichen.
While developing modern applications, it is necessary to ensure an efficient and performant communication between different applications. In current environments, a middleware software is used, which supports the publish/subscribe communication pattern. Using this communication pattern, a publisher sends information encapsulated in messages to the middleware. A subscriber registers its interests at the middleware. The monograph describes three different steps to determine the performance of such a system. In a first step, the message throughput performance of a publish/subscribe in different scenarios is measured using a Java Message Service (JMS) based implementation. In the second step the maximum achievable message throughput is described by adapted models depending on the filter complexity and the replication grade. Using the model, the performance characteristics of a specific system in a given scenario can be determined. These numbers are used for the queuing model described in the third part of the thesis, which supports the dimensioning of a system in realistic scenarios. Additionally, we introduce a method to approximate an M/G/1 system numerically in an efficient way, which can be used for real time analysis to predict the expected performance in a certain scenario. Finally, the analytical model is used to investigate different possibilities to ensure the scalability of the maximum achievable message throughput of the overall system.
Wireless communication is nothing new. The first data transmissions based on electromagnetic waves have been successfully performed at the end of the 19th century. However, it took almost another century until the technology was ripe for mass market. The first mobile communication systems based on the transmission of digital data were introduced in the late 1980s. Within just a couple of years they have caused a revolution in the way people communicate. The number of cellular phones started to outnumber the fixed telephone lines in many countries and is still rising. New technologies in 3G systems, such as UMTS, allow higher data rates and support various kinds of multimedia services. Nevertheless, the end of the road in wireless communication is far from being reached. In the near future, the Internet and cellular phone systems are expected to be integrated to a new form of wireless system. Bandwidth requirements for a rich set of wireless services, e.g.\ video telephony, video streaming, online gaming, will be easily met. The transmission of voice data will just be another IP based service. On the other hand, building such a system is by far not an easy task. The problems in the development of the UMTS system showed the high complexity of wireless systems with support for bandwidth-hungry, IP-based services. But the technological challenges are just one difficulty. Telecommunication systems are planned on a world-wide basis, such that standard bodies, governments, institutions, hardware vendors, and service providers have to find agreements and compromises on a number of different topics. In this work, we provide the reader with a discussion of many of the topics involved in the planning of a Wireless LAN system that is capable of being integrated into the 4th generation mobile networks (4G) that is being discussed nowadays. Therefore, it has to be able to cope with interactive voice and video traffic while still offering high data rates for best effort traffic. Let us assume a scenario where a huge office complex is completely covered with Wireless LAN access points. Different antenna systems are applied in order to reduce the number of access points that are needed on the one hand, while optimizing the coverage on the other. No additional infrastructure is implemented. Our goal is to evaluate whether the Wireless LAN technology is capable of dealing with the various demands of such a scenario. First, each single access point has to be capable of supporting best-effort and Quality of Service (QoS) demanding applications simultaneously. The IT infrastructure in our scenario consists solely of Wireless LAN, such that it has to allow users surfing the Web, while others are involved in voice calls or video conferences. Then, there is the problem of overlapping cells. Users attached to one access point produce interference for others. However, the QoS support has to be maintained, which is not an easy task. Finally, there are nomadic users, which roam from one Wireless LAN cell to another even during a voice call. There are mechanisms in the standard that allow for mobility, but their capabilities for QoS support are yet to be studied. This shows the large number of unresolved issues when it comes to Wireless LAN in the context of 4G networks. In this work we want to tackle some of the problems.
At the center of the Internet’s protocol stack stands the Internet Protocol (IP) as a common denominator that enables all communication. To make routing efficient, resilient, and scalable, several aspects must be considered. Care must be taken that traffic is well balanced to make efficient use of the existing network resources, both in failure free operation and in failure scenarios.
Finding the optimal routing in a network is an NP-complete problem. Therefore, routing optimization is usually performed using heuristics. This dissertation shows that a routing optimized with one objective function is often not good when looking at other objective functions. It can even be worse than unoptimized routing with respect to that objective function. After looking at failure-free routing and traffic distribution in different failure scenarios, the analysis is extended to include the loop-free alternate (LFA) IP fast reroute mechanism. Different application scenarios of LFAs are examined and a special focus is set on the fact that LFAs usually cannot protect all traffic in a network even against single link failures. Thus, the routing optimization for LFAs is targeted on both link utilization and failure coverage. Finally, the pre-congestion notification mechanism PCN for network admission control and overload protection is analyzed and optimized. Different design options for implementing the protocol are compared, before algorithms are developed for the calculation and optimization of protocol parameters and PCN-based routing.
The second part of the thesis tackles a routing problem that can only be resolved on a global scale. The scalability of the Internet is at risk since a major and intensifying growth of the interdomain routing tables has been observed. Several protocols and architectures are analyzed that can be used to make interdomain routing more scalable. The most promising approach is the locator/identifier (Loc/ID) split architecture which separates routing from host identification. This way, changes in connectivity, mobility of end hosts, or traffic-engineering activities are hidden from the routing in the core of the Internet and the routing tables can be kept much smaller. All of the currently proposed Loc/ID split approaches have their downsides. In particular, the fact that most architectures use the ID for routing outside the Internet’s core is a poor design, which inhibits many of the possible features of a new routing architecture. To better understand the problems and to provide a solution for a scalable routing design that implements a true Loc/ID split, the new GLI-Split protocol is developed in this thesis, which provides separation of global and local routing and uses an ID that is independent from any routing decisions.
Besides GLI-Split, several other new routing architectures implementing Loc/ID split have been proposed for the Internet. Most of them assume that a mapping system is queried for EID-to-RLOC mappings by an intermediate node at the border of an edge network. When the mapping system is queried by an intermediate node, packets are already on their way towards their destination, and therefore, the mapping system must be fast, scalable, secure, resilient, and should be able to relay packets without locators to nodes that can forward them to the correct destination. The dissertation develops a classification for all proposed mapping system architectures and shows their similarities and differences. Finally, the fast two-level mapping system FIRMS is developed. It includes security and resilience features as well as a relay service for initial packets of a flow when intermediate nodes encounter a cache miss for the EID-to-RLOC mapping.
Starfree regular languages can be build up from alphabet letters by using only Boolean operations and concatenation. The complexity of these languages can be measured with the so-called dot-depth. This measure leads to concatenation hierarchies like the dot-depth hierarchy (DDH) and the closely related Straubing-Thérien hierarchy (STH). The question whether the single levels of these hierarchies are decidable is still open and is known as the dot-depth problem. In this thesis we prove/reprove the decidability of some lower levels of both hierarchies. More precisely, we characterize these levels in terms of patterns in finite automata (subgraphs in the transition graph) that are not allowed. Therefore, such characterizations are called forbidden-pattern characterizations. The main results of the thesis are as follows: forbidden-pattern characterization for level 3/2 of the DDH (this implies the decidability of this level) decidability of the Boolean hierarchy over level 1/2 of the DDH definition of decidable hierarchies having close relations to the DDH and STH Moreover, we prove/reprove the decidability of the levels 1/2 and 3/2 of both hierarchies in terms of forbidden-pattern characterizations. We show the decidability of the Boolean hierarchies over level 1/2 of the DDH and over level 1/2 of the STH. A technique which uses word extensions plays the central role in the proofs of these results. With this technique it is possible to treat the levels 1/2 and 3/2 of both hierarchies in a uniform way. Furthermore, it can be used to prove the decidability of the mentioned Boolean hierarchies. Among other things we provide a combinatorial tool that allows to partition words of arbitrary length into factors of bounded length such that every second factor u leads to a loop with label u in a given finite automaton.
In this doctoral thesis we cover the performance evaluation of next generation data plane architectures, comprised of complex software as well as programmable hardware components that allow fine granular configuration. In the scope of the thesis we propose mechanisms to monitor the performance of singular components and model key performance indicators of software based packet processing solutions. We present novel approaches towards network abstraction that allow the integration of heterogeneous data plane technologies into a singular network while maintaining total transparency between control and data plane. Finally, we investigate a full, complex system consisting of multiple software-based solutions and perform a detailed performance analysis. We employ simulative approaches to investigate overload control mechanisms that allow efficient operation under adversary conditions. The contributions of this work build the foundation for future research in the areas of network softwarization and network function virtualization.
Knowledge-based systems (KBS) face an ever-increasing interest in various disciplines and contexts. Yet, the former aim to construct the ’perfect intelligent software’ continuously shifts to user-centered, participative solutions. Such systems enable users to contribute their personal knowledge to the problem solving process for increased efficiency and an ameliorated user experience. More precisely, we define non-functional key requirements of participative KBS as: Transparency (encompassing KBS status mediation), configurability (user adaptability, degree of user control/exploration), quality of the KB and UI, and evolvability (enabling the KBS to grow mature with their users). Many of those requirements depend on the respective target users, thus calling for a more user-centered development. Often, also highly expertise domains are targeted — inducing highly complex KBs — which requires a more careful and considerate UI/interaction design. Still, current KBS engineering (KBSE) approaches mostly focus on knowledge acquisition (KA) This often leads to non-optimal, little reusable, and non/little evaluated KBS front-end solutions.
In this thesis we propose a more encompassing KBSE approach. Due to the strong mutual influences between KB and UI, we suggest a novel form of intertwined UI and KB development. We base the approach on three core components for encompassing KBSE:
(1) Extensible prototyping, a tailored form of evolutionary prototyping; this builds on mature UI prototypes and offers two extension steps for the anytime creation of core KBS prototypes (KB + core UI) and fully productive KBS (core KBS prototype + common framing functionality). (2) KBS UI patterns, that define reusable solutions for the core KBS UI/interaction; we provide a basic collection of such patterns in this work. (3) Suitable usability instruments for the assessment of the KBS artifacts. Therewith, we do not strive for ’yet another’ self-contained KBS engineering methodology. Rather, we motivate to extend existing approaches by the proposed key components. We demonstrate this based on an agile KBSE model.
For practical support, we introduce the tailored KBSE tool ProKEt. ProKEt offers a basic selection of KBS core UI patterns and corresponding configuration options out of the box; their further adaption/extension is possible on various levels of expertise. For practical usability support, ProKEt offers facilities for quantitative and qualitative data collection. ProKEt explicitly fosters the suggested, intertwined development of UI and KB. For seamlessly integrating KA activities, it provides extension points for two selected external KA tools: For KnowOF, a standard office based KA environment. And for KnowWE, a semantic wiki for collaborative KA. Therewith, ProKEt offers powerful support for encompassing, user-centered KBSE.
Finally, based on the approach and the tool, we also developed a novel KBS type: Clarification KBS as a mashup of consultation and justification KBS modules. Those denote a specifically suitable realization for participative KBS in highly expertise contexts and consequently require a specific design. In this thesis, apart from more common UI solutions, we particularly also introduce KBS UI patterns especially tailored towards Clarification KBS.
Given points in the plane, connect them using minimum ink. Though the task seems simple, it turns out to be very time consuming. In fact, scientists believe that computers cannot efficiently solve it. So, do we have to resign? This book examines such NP-hard network-design problems, from connectivity problems in graphs to polygonal drawing problems on the plane. First, we observe why it is so hard to optimally solve these problems. Then, we go over to attack them anyway. We develop fast algorithms that find approximate solutions that are very close to the optimal ones. Hence, connecting points with slightly more ink is not hard.
In many cases, problems, data, or information can be modeled as graphs. Graphs can be used as a tool for modeling in any case where connections between distinguishable objects occur. Any graph consists of a set of objects, called vertices, and a set of connections, called edges, such that any edge connects a pair of vertices. For example, a social network can be modeled by a graph by
transforming the users of the network into vertices and friendship relations between users into edges. Also physical networks like computer networks or transportation networks, for example, the metro network of a city, can be seen as graphs.
For making graphs and, thereby, the data that is modeled, well-understandable for users, we need a visualization. Graph drawing deals with algorithms for visualizing graphs. In this thesis, especially the use of crossings and curves is investigated for graph drawing problems under additional constraints. The constraints that occur in the problems investigated in this thesis especially restrict the positions of (a part of) the vertices; this is done either as a hard constraint or as an optimization criterion.
In der vorliegenden Arbeit wird das Problem der Kalibrierung Agenten-basierter Simulationen (ABS) behandelt, also das Problem, die Parameterwerte eines Agenten-basierten Simulationsmodells so einzustellen, dass valides Simulationsverhalten erreicht wird. Das Kalibrierungsproblem für Simulationen an sich ist nicht neu und ist im Rahmen klassischer Simulationsparadigmen, wie z.B. der Makro-Simulation, fester Bestandteil der Forschung. Im Vergleich zu den dort betrachteten Kalibrierungsproblemen zeichnet sich das Kalibrierungsproblem für ABS jedoch durch eine Reihe zusätzlicher Herausforderungen aus, welche die direkte Anwendung existierender Kalibrierungsverfahren in begrenzter Zeit erschweren, bzw. nicht mehr sinnvoll zulassen. Die Lösung dieser Probleme steht im Zentrum dieser Dissertation: Das Ziel besteht darin, den Nutzer bei der Kalibrierung von ABS auf der Basis von unzureichenden, potentiell fehlerhaften Daten und Wissen zu unterstützen. Dabei sollen drei Hauptprobleme gelöst werden: 1)Vereinfachung der Kalibrierung großer Agenten-Parametermengen auf der Mikro- Ebene in Agenten-basierten Simulationen durch Ausnutzung der spezifischen Struktur von ABS (nämlich dem Aufbau aus einer Menge von Agentenmodellen). 2)Kalibrierung Agenten-basierter Simulationen, so dass auf allen relevanten Beobachtungsebenen valides Simulationsverhalten erzeugt wird (mindestens Mikro und Makro-Ebene). Als erschwerende Randbedingung muss die Kalibrierung unter der Voraussetzung einer Makro-Mikro-Wissenslücke durchgeführt werden. 3)Kalibrierung Agenten-basierter Simulationen auf der Mikro-Ebene unter der Voraussetzung, dass zur Kalibrierung einzelner Agentenmodelle nicht ausreichend und potentiell verfälschte Daten zur Verhaltensvalidierung zur Verfügung stehen. Hierzu wird in dieser Arbeit das sogenannte Makro-Mikro-Verfahren zur Kalibrierung von Agenten-basierten Simulationen entwickelt. Das Verfahren besteht aus einem Basisverfahren, das im Verlauf der Arbeit um verschiedene Zusatzverfahren erweitert wird. Das Makro-Mikro-Verfahren und seine Erweiterungen sollen dazu dienen, die Modellkalibrierung trotz stark verrauschter Daten und eingeschränktem Wissen über die Wirkungszusammenhänge im Originalsystem geeignet zu ermöglichen und dabei den Kalibrierungsprozess zu beschleunigen: 1) Makro-Mikro-Kalibrierungsverfahren: Das in dieser Arbeit entwickelte Makro- Mikro-Verfahren unterstützt den Nutzer durch eine kombinierte Kalibrierung auf der Mikro- und der Makro-Beobachtungsebene, die gegebenenfalls durch Zwischenebenen erweitert werden kann. Der Grundgedanke des Verfahrens besteht darin, das Kalibrierungsproblem in eines auf aggregierter Verhaltensebene und eines auf der Ebene des Mikro-Agentenverhaltens aufzuteilen. Auf der Makro-Ebene wird nach validen idealen aggregierten Verhaltensmodellen (IVM) der Agenten gesucht. Auf der Mikro-Ebene wird versucht die individuellen Modelle der Agenten auf Basis des erwünschten Gesamtverhaltens und der ermittelten IVM so zu kalibrieren, das insgesamt Simulationsverhalten entsteht, das sowohl auf Mikro- als auch auf Makro-Ebene valide ist. 2) Erweiterung 1: Robuste Kalibrierung: Um den Umgang mit potentiell verrauschten Validierungskriterien (d.h. mit verrauschten Daten über ein Originalsystem, auf denen die Validierungskriterien der Simulation beruhen) und Modellteilen während der Kalibrierung von ABS zu ermöglichen, wird eine robuste Kalibrierungstechnik zur Anwendung im Makro-Mikro-Verfahren entwickelt. 3) Erweiterung 2: Kalibrierung mit Heterogenitätssuche: Als zweite Erweiterung des Makro-Mikro-Verfahrens wird ein Verfahren entwickelt, das das Problem des unklaren Detaillierungsgrades von ABS auf der Ebene der Parameterwerte adressiert. Prinzipiell kann zwar jeder Agent unterschiedliche Parameterwerte verwenden, obwohl eine geringere Heterogenität zur Erzeugung validen Verhaltens ausreichend wäre. Die entwickelte Erweiterung versucht, während der Kalibrierung, eine geeignete Heterogenitätsausprägung für die Parameterwerte der Agenten zu ermitteln. Unter einer Heterogenitätsausprägung wird dabei eine Einteilung der simulierten Agenten in Gruppen mit jeweils gleichen Parameterwerten verstanden. Die Heterogenitätssuche dient dazu, einen Kompromiss zu finden zwischen der Notwendigkeit, sehr große Parametersuchräume durchsuchen zu müssen und gleichzeitig den Suchraum so klein wie möglich halten zu wollen.
In the last years, visual methods have been introduced in industrial software production and teaching of software engineering. In particular, the international standardization of a graphical software engineering language, the Unified Modeling Language (UML) was a reason for this tendency. Unfortunately, various problems exist in concrete realizations of tools, e.g. due to a missing compliance to the standard. One problem is the automatic layout, which is required for a consistent automatic software design. The thesis derives reasons and criteria for an automatic layout method, which produces drawings of UML class diagrams according to the UML specification and issues of human computer interaction, e.g. readability. A unique set of aesthetic criteria is combined from four different disciplines involved in this topic. Based on these aethetic rules, a hierarchical layout algorithm is developed, analyzed, measured by specialized measuring techniques and compared to related work. Then, the realization of the algorithm as a Java framework is given as an architectural description. Finally, adaptions to anticipated future changes of the UML, improvements of the framework and example drawings of the implementation are given.
To jointly provide different services/technologies, like IP and Ethernet or IP and SDH/SONET, in a single network, equipment of multiple technologies needs to be deployed to the sites/Points of Presence (PoP) and interconnected with each other. Therein, a technology may provide transport functionality to other technologies and increase the number of available resources by using multiplexing techniques. By providing its own switching functionality, each technology creates connections in a logical layer which leads to the notion of multi-layer networks. The design of such networks comprises the deployment and interconnection of components to suit to given traffic demands. To prevent traffic loss due to failures of networking equipment, protection mechanisms need to be established. In multi-layer networks, protection usually can be applied in any of the considered layers. In turn, the hierarchical structure of multi-layer networks also bears shared risk groups (SRG). To achieve a cost-optimal resilient network, an appropriate combination of multiplexing techniques, technologies, and their interconnections needs to be found. Thus, network design is a combinatorial problem with a large parameter and solution space. After the design stage, the resources of a multi-layer network can be provided to traffic demands. Especially, dynamic capacity provisioning requires interaction of sites and layers, as well as accurate retrieval of constraint information. In recent years, generalized multiprotocol label switching (GMPLS) and path computation elements (PCE) have emerged as possible approaches for these challenges. Like the design, the provisioning of multi-layer networks comprises a variety of optimization parameters, like blocking probability, resilience, and energy efficiency. In this work, we introduce several efficient heuristics to approach the considered optimization problems. We perform capital expenditure (CAPEX)-aware design of multi-layer networks from scratch, based on IST NOBEL phase 2 project's cost and equipment data. We comprise traffic and resilience requirements in different and multiple layers as well as different network architectures. On top of the designed networks, we consider the dynamic provisioning of multi-layer traffic based on the GMPLS and PCE architecture. We evaluate different PCE deployments, information retrieval strategies, and re-optimization. Finally, we show how information about provisioning utilization can be used to provide a feedback for network design.