004 Datenverarbeitung; Informatik
Refine
Has Fulltext
- yes (80)
Is part of the Bibliography
- yes (80)
Year of publication
Document Type
- Doctoral Thesis (80) (remove)
Keywords
- Leistungsbewertung (13)
- Robotik (8)
- Mobiler Roboter (7)
- Autonomer Roboter (6)
- Komplexitätstheorie (5)
- Netzwerk (5)
- Optimierung (5)
- Simulation (5)
- Theoretische Informatik (5)
- Modellierung (4)
Institute
Schriftenreihe
Sonstige beteiligte Institutionen
Historical maps are fascinating documents and a valuable source of information for scientists of various disciplines. Many of these maps are available as scanned bitmap images, but in order to make them searchable in useful ways, a structured representation of the contained information is desirable.
This book deals with the extraction of spatial information from historical maps. This cannot be expected to be solved fully automatically (since it involves difficult semantics), but is also too tedious to be done manually at scale.
The methodology used in this book combines the strengths of both computers and humans: it describes efficient algorithms to largely automate information extraction tasks and pairs these algorithms with smart user interactions to handle what is not understood by the algorithm. The effectiveness of this approach is shown for various kinds of spatial documents from the 16th to the early 20th century.
Small satellites contribute significantly in the rapidly evolving innovation in space engineering, in particular in distributed space systems for global Earth observation and communication services. Significant mass reduction by miniaturization, increased utilization of commercial high-tech components, and in particular standardization are the key drivers for modern miniature space technology.
This thesis addresses key fields in research and development on miniature satellite technology regarding efficiency, flexibility, and robustness. Here, these challenges are addressed by the University of Wuerzburg’s advanced pico-satellite bus, realizing a generic modular satellite architecture and standardized interfaces for all subsystems. The modular platform ensures reusability, scalability, and increased testability due to its flexible subsystem interface which allows efficient and compact integration of the entire satellite in a plug-and-play manner.
Beside systematic design for testability, a high degree of operational robustness is achieved by the consequent implementation of redundancy of crucial subsystems. This is combined with efficient fault detection, isolation and recovery mechanisms. Thus, the UWE-3 platform, and in particular the on-board data handling system and the electrical power system, offers one of the most efficient pico-satellite architectures launched in recent years and provides a solid basis for future extensions.
The in-orbit performance results of the pico-satellite UWE-3 are presented and summarize successful operations since its launch in 2013. Several software extensions and adaptations have been uploaded to UWE-3 increasing its capabilities. Thus, a very flexible platform for in-orbit software experiments and for evaluations of innovative concepts was provided and tested.
We use algebraic closures and structures which are derived from these in complexity theory. We classify problems with Boolean circuits and Boolean constraints according to their complexity. We transfer algebraic structures to structural complexity. We use the generation problem to classify important complexity classes.
Die Entwicklung eines wissensbasierten Systems, speziell eines Diagnosesystems, ist eine Teildisziplin der künstlichen Intelligenz und angewandten Informatik. Im Laufe der Forschung auf diesem Gebiet wurden verschiedene Lösungsansätze mit unterschiedlichem Erfolg bei der Anwendung in der Kraftfahrzeugdiagnose entwickelt. Diagnosesysteme in Vertragswerkstätten, das heißt in Fahrzeughersteller gebundenen Werkstätten, wenden hauptsächlich die fallbasierte Diagnostik an. Zum einen hält sich hier die Fahrzeugvielfalt in Grenzen und zum anderen besteht eine Meldepflicht bei neuen, nicht im System vorhandenen Fällen. Die freien Werkstätten verfügen nicht über eine solche Datenbank. Somit ist der fallbasierte Ansatz schwer umsetzbar. In freien Werkstätten - Fahrzeughersteller unabhängigen Werkstätten - basiert die Fehlersuche hauptsächlich auf Fehlerbäumen. Wegen der wachsenden Fahrzeugkomplexität, welche wesentlich durch die stark zunehmende Anzahl der durch mechatronische Systeme realisierten Funktionen bedingt ist, und der steigenden Typenvielfalt ist die geführte Fehlersuche in freien Werkstätten nicht immer zielführend. Um die Unterstützung des Personals von freien Werkstätten bei der zukünftigen Fehlersuche zu gewährleisten, werden neue Generationen von herstellerunabhängigen Diagnosetools benötigt, die die Probleme der Variantenvielfalt und Komplexität lösen. In der vorliegenden Arbeit wird ein Lösungsansatz vorgestellt, der einen qualitativen, modellbasierten Diagnoseansatz mit einem auf heuristischem Diagnosewissen basierenden Ansatz vereint. Neben der Grundlage zur Wissenserhebung werden in dieser Arbeit die theoretische Grundlage zur Beherrschung der Variantenvielfalt sowie die Tests für die erstellten Diagnosemodelle behandelt. Die Diagnose ist symptombasiert und die Inferenzmechanismen zur Verarbeitung des Diagnosewissens sind eine Kombination aus Propagierung der abweichenden physikalischen Größen im Modell und der Auswertung des heuristischen Wissens. Des Weiteren werden in dieser Arbeit verschiedene Aspekte der Realisierung der entwickelten theoretischen Grundlagen dargestellt, zum Beispiel: Systemarchitektur, Wissenserhebungsprozess, Ablauf des Diagnosevorgangs in den Werkstätten. Die Evaluierung der entwickelten Lösung bei der Wissenserhebung in Form von Modellerstellungen und Modellierungsworkshops sowie Feldtests dient nicht nur zur Bestätigung des entwickelten Ansatzes, sondern auch zur Ideenfindung für die Integration der entwickelten Tools in die existierende IT-Infrastruktur.
This work deals with teams in teleoperation scenarios, where one human team partner (supervisor) guides and controls multiple remote entities (either robotic or human) and coordinates their tasks. Such a team needs an appropriate infrastructure for sharing information and commands. The robots need to have a level of autonomy, which matches the assigned task. The humans in the team have to be provided with autonomous support, e.g. for information integration. Design and capabilities of the human-robot interfaces will strongly influence the performance of the team as well as the subjective feeling of the human team partners. Here, it is important to elaborate the information demand as well as how information is presented. Such human-robot systems need to allow the supervisor to gain an understanding of what is going on in the remote environment (situation awareness) by providing the necessary information. This includes achieving fast assessment of the robot´s or remote human´s state. Processing, integration and organization of data as well as suitable autonomous functions support decision making and task allocation and help to decrease the workload in this multi-entity teleoperation task. Interaction between humans and robots is improved by a common world model and a responsive system and robots. The remote human profits from a simplified user interface providing exactly the information needed for the actual task at hand. The topic of this thesis is the investigation of such teleoperation interfaces in human-robot teams, especially for high-risk, time-critical, and dangerous tasks. The aim is to provide a suitable human-robot team structure as well as analyze the demands on the user interfaces. On one side, it will be looked on the theoretical background (model, interactions, and information demand). On the other side, real implementations for system, robots, and user interfaces are presented and evaluated as testbeds for the claimed requirements. Rescue operations, more precisely fire-fighting, was chosen as an exemplary application scenario for this work. The challenges in such scenarios are high (highly dynamic environments, high risk, time criticality etc.) and it can be expected that results can be transferred to other applications, which have less strict requirements. The present work contributes to the introduction of human-robot teams in task-oriented scenarios, such as working in high risk domains, e.g. fire-fighting. It covers the theoretical background of the required system, the analysis of related human factors concepts, as well as discussions on implementation. An emphasis is placed on user interfaces, their design, requirements and user testing, as well as on the used techniques (three-dimensional sensor data representation, mixed reality, and user interface design guidelines). Further, the potential integration of 3D sensor data as well as the visualization on stereo visualization systems is introduced.
To jointly provide different services/technologies, like IP and Ethernet or IP and SDH/SONET, in a single network, equipment of multiple technologies needs to be deployed to the sites/Points of Presence (PoP) and interconnected with each other. Therein, a technology may provide transport functionality to other technologies and increase the number of available resources by using multiplexing techniques. By providing its own switching functionality, each technology creates connections in a logical layer which leads to the notion of multi-layer networks. The design of such networks comprises the deployment and interconnection of components to suit to given traffic demands. To prevent traffic loss due to failures of networking equipment, protection mechanisms need to be established. In multi-layer networks, protection usually can be applied in any of the considered layers. In turn, the hierarchical structure of multi-layer networks also bears shared risk groups (SRG). To achieve a cost-optimal resilient network, an appropriate combination of multiplexing techniques, technologies, and their interconnections needs to be found. Thus, network design is a combinatorial problem with a large parameter and solution space. After the design stage, the resources of a multi-layer network can be provided to traffic demands. Especially, dynamic capacity provisioning requires interaction of sites and layers, as well as accurate retrieval of constraint information. In recent years, generalized multiprotocol label switching (GMPLS) and path computation elements (PCE) have emerged as possible approaches for these challenges. Like the design, the provisioning of multi-layer networks comprises a variety of optimization parameters, like blocking probability, resilience, and energy efficiency. In this work, we introduce several efficient heuristics to approach the considered optimization problems. We perform capital expenditure (CAPEX)-aware design of multi-layer networks from scratch, based on IST NOBEL phase 2 project's cost and equipment data. We comprise traffic and resilience requirements in different and multiple layers as well as different network architectures. On top of the designed networks, we consider the dynamic provisioning of multi-layer traffic based on the GMPLS and PCE architecture. We evaluate different PCE deployments, information retrieval strategies, and re-optimization. Finally, we show how information about provisioning utilization can be used to provide a feedback for network design.
In the last years, visual methods have been introduced in industrial software production and teaching of software engineering. In particular, the international standardization of a graphical software engineering language, the Unified Modeling Language (UML) was a reason for this tendency. Unfortunately, various problems exist in concrete realizations of tools, e.g. due to a missing compliance to the standard. One problem is the automatic layout, which is required for a consistent automatic software design. The thesis derives reasons and criteria for an automatic layout method, which produces drawings of UML class diagrams according to the UML specification and issues of human computer interaction, e.g. readability. A unique set of aesthetic criteria is combined from four different disciplines involved in this topic. Based on these aethetic rules, a hierarchical layout algorithm is developed, analyzed, measured by specialized measuring techniques and compared to related work. Then, the realization of the algorithm as a Java framework is given as an architectural description. Finally, adaptions to anticipated future changes of the UML, improvements of the framework and example drawings of the implementation are given.
In der vorliegenden Arbeit wird das Problem der Kalibrierung Agenten-basierter Simulationen (ABS) behandelt, also das Problem, die Parameterwerte eines Agenten-basierten Simulationsmodells so einzustellen, dass valides Simulationsverhalten erreicht wird. Das Kalibrierungsproblem für Simulationen an sich ist nicht neu und ist im Rahmen klassischer Simulationsparadigmen, wie z.B. der Makro-Simulation, fester Bestandteil der Forschung. Im Vergleich zu den dort betrachteten Kalibrierungsproblemen zeichnet sich das Kalibrierungsproblem für ABS jedoch durch eine Reihe zusätzlicher Herausforderungen aus, welche die direkte Anwendung existierender Kalibrierungsverfahren in begrenzter Zeit erschweren, bzw. nicht mehr sinnvoll zulassen. Die Lösung dieser Probleme steht im Zentrum dieser Dissertation: Das Ziel besteht darin, den Nutzer bei der Kalibrierung von ABS auf der Basis von unzureichenden, potentiell fehlerhaften Daten und Wissen zu unterstützen. Dabei sollen drei Hauptprobleme gelöst werden: 1)Vereinfachung der Kalibrierung großer Agenten-Parametermengen auf der Mikro- Ebene in Agenten-basierten Simulationen durch Ausnutzung der spezifischen Struktur von ABS (nämlich dem Aufbau aus einer Menge von Agentenmodellen). 2)Kalibrierung Agenten-basierter Simulationen, so dass auf allen relevanten Beobachtungsebenen valides Simulationsverhalten erzeugt wird (mindestens Mikro und Makro-Ebene). Als erschwerende Randbedingung muss die Kalibrierung unter der Voraussetzung einer Makro-Mikro-Wissenslücke durchgeführt werden. 3)Kalibrierung Agenten-basierter Simulationen auf der Mikro-Ebene unter der Voraussetzung, dass zur Kalibrierung einzelner Agentenmodelle nicht ausreichend und potentiell verfälschte Daten zur Verhaltensvalidierung zur Verfügung stehen. Hierzu wird in dieser Arbeit das sogenannte Makro-Mikro-Verfahren zur Kalibrierung von Agenten-basierten Simulationen entwickelt. Das Verfahren besteht aus einem Basisverfahren, das im Verlauf der Arbeit um verschiedene Zusatzverfahren erweitert wird. Das Makro-Mikro-Verfahren und seine Erweiterungen sollen dazu dienen, die Modellkalibrierung trotz stark verrauschter Daten und eingeschränktem Wissen über die Wirkungszusammenhänge im Originalsystem geeignet zu ermöglichen und dabei den Kalibrierungsprozess zu beschleunigen: 1) Makro-Mikro-Kalibrierungsverfahren: Das in dieser Arbeit entwickelte Makro- Mikro-Verfahren unterstützt den Nutzer durch eine kombinierte Kalibrierung auf der Mikro- und der Makro-Beobachtungsebene, die gegebenenfalls durch Zwischenebenen erweitert werden kann. Der Grundgedanke des Verfahrens besteht darin, das Kalibrierungsproblem in eines auf aggregierter Verhaltensebene und eines auf der Ebene des Mikro-Agentenverhaltens aufzuteilen. Auf der Makro-Ebene wird nach validen idealen aggregierten Verhaltensmodellen (IVM) der Agenten gesucht. Auf der Mikro-Ebene wird versucht die individuellen Modelle der Agenten auf Basis des erwünschten Gesamtverhaltens und der ermittelten IVM so zu kalibrieren, das insgesamt Simulationsverhalten entsteht, das sowohl auf Mikro- als auch auf Makro-Ebene valide ist. 2) Erweiterung 1: Robuste Kalibrierung: Um den Umgang mit potentiell verrauschten Validierungskriterien (d.h. mit verrauschten Daten über ein Originalsystem, auf denen die Validierungskriterien der Simulation beruhen) und Modellteilen während der Kalibrierung von ABS zu ermöglichen, wird eine robuste Kalibrierungstechnik zur Anwendung im Makro-Mikro-Verfahren entwickelt. 3) Erweiterung 2: Kalibrierung mit Heterogenitätssuche: Als zweite Erweiterung des Makro-Mikro-Verfahrens wird ein Verfahren entwickelt, das das Problem des unklaren Detaillierungsgrades von ABS auf der Ebene der Parameterwerte adressiert. Prinzipiell kann zwar jeder Agent unterschiedliche Parameterwerte verwenden, obwohl eine geringere Heterogenität zur Erzeugung validen Verhaltens ausreichend wäre. Die entwickelte Erweiterung versucht, während der Kalibrierung, eine geeignete Heterogenitätsausprägung für die Parameterwerte der Agenten zu ermitteln. Unter einer Heterogenitätsausprägung wird dabei eine Einteilung der simulierten Agenten in Gruppen mit jeweils gleichen Parameterwerten verstanden. Die Heterogenitätssuche dient dazu, einen Kompromiss zu finden zwischen der Notwendigkeit, sehr große Parametersuchräume durchsuchen zu müssen und gleichzeitig den Suchraum so klein wie möglich halten zu wollen.
In many cases, problems, data, or information can be modeled as graphs. Graphs can be used as a tool for modeling in any case where connections between distinguishable objects occur. Any graph consists of a set of objects, called vertices, and a set of connections, called edges, such that any edge connects a pair of vertices. For example, a social network can be modeled by a graph by
transforming the users of the network into vertices and friendship relations between users into edges. Also physical networks like computer networks or transportation networks, for example, the metro network of a city, can be seen as graphs.
For making graphs and, thereby, the data that is modeled, well-understandable for users, we need a visualization. Graph drawing deals with algorithms for visualizing graphs. In this thesis, especially the use of crossings and curves is investigated for graph drawing problems under additional constraints. The constraints that occur in the problems investigated in this thesis especially restrict the positions of (a part of) the vertices; this is done either as a hard constraint or as an optimization criterion.
Given points in the plane, connect them using minimum ink. Though the task seems simple, it turns out to be very time consuming. In fact, scientists believe that computers cannot efficiently solve it. So, do we have to resign? This book examines such NP-hard network-design problems, from connectivity problems in graphs to polygonal drawing problems on the plane. First, we observe why it is so hard to optimally solve these problems. Then, we go over to attack them anyway. We develop fast algorithms that find approximate solutions that are very close to the optimal ones. Hence, connecting points with slightly more ink is not hard.