Institut für Geologie
Refine
Has Fulltext
- yes (15)
Is part of the Bibliography
- yes (15)
Year of publication
Document Type
- Doctoral Thesis (15) (remove)
Language
- English (15) (remove)
Keywords
- Hydrogeologie (4)
- Grundwasser (3)
- Karoo (3)
- Namibia (3)
- Namibia <Nordwest> (3)
- Golf von Akaba (2)
- Gondwana (2)
- Grundwasserneubildung (2)
- Kalahari (2)
- Sedimentologie (2)
Institute
A completely revised and enhanced version of the water balance model MODBIL of the regional water balance dynamics of Cyprus was developed for this study. The model is based on a physical, process-oriented, spatially distributed concept and is applied for the calculation of all important water balance components of the island for the time period of 1961-2004. The calibrated results are statistically analysed and visualised for the whole island area, and evaluated with respect to the renewability of natural water resources. Climate variability and changes of the past decades are analysed with regard to their influence on water balances. A further part of the study focusses on the simulation of impacts of potential climate change. The water balances are simulated under changing climatic conditions on the base of theoretical precipitation, temperature and relative humidity changes and the revealed impacts on the water balances and renewable resources are discussed. Furthermore, a first principal water balance scenario is developed for the assessment of the regional hydrological changes expected for Cyprus by the end of the 21st century. The scenarios are based on recently calculated climate change assessments for this part of the Mediterranean, under an assumed further increase of greenhouse gasses in the atmosphere.
In 2001 the 433 m deep Messel 2001 borehole was drilled in the centre of the Messel Pit, 25 km south of Frankfurt (Germany). Geoscientific results from this drilling clarified the origin of the circular-shaped basin as a maar-diatreme-structure. Recovered deposits consist of lacustrine sediments (0-240 m) and volcaniclastic rocks such as lapilli tuffs (240-373 m) as well as rocks of the underlying diatreme breccia (373 433 m). The lapilli tuffs, as main interest here, show little differentiation on a macro- and microscopic scale and appear as a massive and unsorted volcaniclastic body with dominating juvenile lapilli and accidental clasts mostly in the range of (sub)millimetres to centimetres in diameter. This study presents rock magnetic properties measured on core samples of the volcaniclastic units and explains the origin of downhole magnetic anomalies detected during the drilling project in 2001. Magnetic behaviour of the erupted material is related to fine-grained, Fe-rich (titano)-magnetites, which are dispersed within the juvenile lapilli. Temperature-dependent susceptibility experiments, isothermal remanent magnetisation and hysteresis investigations demonstrate similar ferrimagnetic properties throughout the volcaniclastic material, in terms of composition, coercivity and grain size (pseudo-single-domain particles) of the ferrimagnetic minerals. Thus, during emplacement of the erupted material, the ferrimagnetic minerals had the same remanence acquisition potential. However, demagnetisation experiments show different magnetic stability behaviour of the acquired natural remanent magnetisation (NRM). Heating experiments prove the acquisition of thermal remanent magnetisation (TRM) dominated by temperature effects which could have been occurred during eruption and deposition of volcanic material, forming the Messel maar-diatreme. It is assumed that the upper half of the lapilli tuffs was deposited at relatively low depositional temperatures (<300 °C), whereas the material of the lower half took advantage of higher temperatures (>>300 °C). To understand the rock magnetic character within the Messel maar-diatreme-facies, particle grain sizes, the degree of the relative fraction dominance and the shape of the juvenile fragments have been studied in more detail. Image analytical methods as well as major and trace element analyses on the juvenile fraction support the clear subdivision of the lapilli tuffs. These findings in combination with rockmagnetic data indicate a separation into a relatively hot, geochemically undifferentiated eruption phase and a colder, differentiated phase. A two-condition eruption stage at the end of the Messel volcanic activity is suggested. The juvenile particles account for the temperature evolution and heat conditions during deposition of the Messel tuffs and contribute to the origin of magnetic field anomalies. Based on gravity parameters and the results of magnetisation properties, the potential field 3D-model of the Messel subsurface explains the negative ground anomalies, calculates the mass and volume parameters of the drilled lithozones and shows the asymmetric appearance of the diatreme-structure.
The Mesosaurus Inland Sea covered, in the Late Paleozoic, vast areas (~5 Mio km2) of the SW-Gondwanan continental interior. Major depocentres are represented by the Karoo basins of SW-Africa and the Paraná Basin in South America. These areas were interconnected prior to the break-up of Gondwana and the subsequent opening of the South Atlantic Ocean. In Namibia and South Africa deposits of the Mesosaurus Inland Sea are preserved in the successions of the glacial Dwyka Group and the postglacial Ecca Group (Karoo Supergroup). These deposits comprise the major part of a 60-70 Ma depositional cycle and are the main focus of this study. The large-scale transgressive part of this cycle started in the Late Carboniferous with continental glacial deposits followed by marine glacial and postglacial inland sea deposits. During the Early Permian the Mesosaurus Inland Sea reached its greatest extent, which was accompanied by widespread deposition of Corg-rich sediments. The large scale regressive part is recorded by successions ranging from deep water offshore pelites and turbidite sandstones to shallow water shoreface and deltaic sandstones, deposited in a brackish environment. Shallow water inland sea sediments are in turn overlain by fluvio-lacustrine deposits, which are assigned to the Beaufort Group and form the upper part of the cycle. This successive change in the depositional environment from marine to brackish to freshwater is also reflected in the fossil record. During Dwyka times a marine association of the Gondwana faunal province was able to colonize parts of the Mesosaurus Inland Sea. Later, during lower Ecca times, the connection to the Panthalassan Ocean became insufficient to retain normal marine conditions, leading to strong faunal endemism in an isolated and brackish inland sea environ¬ment. The most well-known and widespread representatives of this endemic fauna are mesosaurid vertebrates and megadesmid bivalves. Numerous altered tuffs occur as interlayers within argillaceous sediments of the Dwyka and Ecca Group of southern Namibia. The vast majority of these altered tuffs are represented by soft and crumbly to hard and indurated, clay-mineral-rich, bentonitic layers. Another, much rarer type is represented by very hard, chert-like tuff layers, which are predominantly albitic in composition. Furthermore, tuff layers within the Gai-As Formation of the Huab area are rich in potassium feldspar and have a porcelain-like appearance. The diagenetically modified matrix is mainly crypto- to microcrystalline. Polished tuff specimen show, in some tuffs, plane lamination or bedding with two or more subunits forming a tuff layer. Some display a weakly developed lamination. Only in very rare cases were structures reminiscent of sedimentary micro-cross lamination observed. The sedimentary textures and structures of the tuffs indicate that they have been deposited mainly as distal ash-fall layers by suspension settling in water. Some may have also been deposited or modified under the influence of weak bottom currents. The primary, pyroclastic macro-components of the tuffs are mainly represented by crystals of quartz, plagio¬clase, and biotite. In some thin sections pseudo¬morphs after pyroxene or hornblende were observed. Euhedral zircon and apatite crystals were observed in almost every tuff. Vitric or formerly vitric macro-components are very rare. The matrix of the majority of the investigated tuffs is predominantly composed of clay minerals. However, the matrix of the tuffs originally consisted most probably of fine vitric ash particles. Soon after deposition the volcanic ash was diagenetically altered to smectitic clay minerals. At a later stage smectite was progressively replaced by illite under prograde conditions. Nowadays the matrix of the bentonitic tuffs is strongly illite-dominated and only in the softer tuff layers a minor smectite content can be detected. Both the primary macrocrystic components as well as the geochemistry of the altered tuffs indicate that their source magmas were mainly of intermediate composition. The abundance of splintery quartz and feldspar crystal fragments within the tuffs hints at a highly explosive plinian or phreatoplinian eruption style of the source volcanoes, which were most probably located within a subduction-related volcanic arc region along the southern margin of Gondwana. New single zircon U-Pb SHRIMP datings of tuff layers provide a much more reliable age control of the investigated sedimentary succession. U-Pb SHRIMP ages for tuff layers from the glaciogenic Dwyka Group in southwestern Africa range from 302.0 ± 3.0 to 297.1 ± 1.8 Ma. The basal part of the early post-glacial Prince Albert Formation is dated at around 290 Ma. SHRIMP ages for tuff layers from the upper part of the Prince Albert Formation, the Whitehill Formation, and the middle part of the Collingham Formation indicate that the Mesosaurus Sea reached its greatest extent at around 280 Ma.
The geologic barrier represents the final contact between a landfill and the environment. Ideally suited are clays and mudstones because of sufficient vertical and lateral extent, low hydraulic conductivities and high sorptive characteristics. Since hydraulic conductivity is no longer the single criteria to determine transport and retardation of contaminants in geologic landfill barrier materials, diffusive and sorptive characteristics of 4 different clay and mudstone lithologies in Northern Bavaria, were investigated. Cored samples from various depths were included in this study and subjected to evaluations of geochemistry, mineralogy, physical parameters, sorption and diffusion. A transient double reservoir with decreasing source concentration was designed and constructed using clear polycarbonate cylinders for undisturbed clay plugs of 2 to 4cm thickness. Samples were also fitted with internal electrical conductivity probes to determine the migration of the diffusive front. A multi chemical species synthetic landfill leachate was contrived to simulate and evaluate natural pollutant conditions. A computational method for determining mineralogy from geochemical data was also developed. It was found that sorptive processes are mostly controlled by the quality and type of fine grained phyllosilicates and the individual chemical species involved exhibited linear, Freundlich, as well as Langmuir sorption properties. Effective diffusion and sorption coefficients were also determined using POLLUTEv6 (GAEA, 1997) software and receptor reservoir concentrations for K, Na, Ca, Cu, NH4, Cl, NO3, SO4, and concentration totals at predetermined time intervals. Anion exclusion proved to be a major factor in the diffusion process and was used to explain many observed anomalies. Furthermore, diffusion coefficients were found not to be static with a multi chemical species leachate, but actually varied during the course of the experiment. Strong indications point toward the major role of pore space quality, shape, and form as control of diffusive properties of a geologic barrier. A correlation of CECNa of the samples with De may point to a possible deduction of diffusive properties for multi species leachates without extensive and time consuming laboratory tests
Two phases of reef sampling were carried out. The first included regular samples taken along the coastline of Aqaba (27km long) at depths of 4-15m, and used to determine spatial distribution of pollution. The second phase included three 20cm-deep cores obtained from within the industrial zone. These cores were drilled from pre-dated communities, where the growth rate was determined earlier to be 10mm y-1, therefore the core obtained represented a period of 20 years (i.e. 1980-2000). The cores were used to reconstruct the metal pollution history at the most heavily used site along the coast (industrial zone).All samples were examined with respect to their metal content of Cd, Pb, Cu, Zn, Ni, and Cr. Almost all of them have shown records above the calculated background values. Mean values of Cd, Pb, Cu, Zn, Ni and Cr recorded along the coast were 1,25; 4,26; 9,76; 11,40; 2,29 and 10,522, µg g-1 respectively, and for core samples 1.4; 4.2; 5.7; 6.4; 2.3 and 8.21 µg g-1 respectively. Spatial distribution of metal enrichment in reef samples have shown a general and clear increasing trend towards the south. Same increasing trend was also in core samples where the six metals have shown a prominent increasing trend towards the core surface indicating an increase of coastal activities during the last twenty years. High and relatively high values were recorded at the oil port, the industrial area and main port, and thus categorized as highly impacted areas. Intermediate metal content were recorded in samples of the north beach, and thus classified as being relatively impacted, where the lowest metal concentrations were observed at the marine reserve, the least impacted site along the coast. The high enrichment of metal is attributed mainly to anthropogenic impacts. The natural inputs of the six metals studied in the Gulf of Aqaba are generally very low, due to the geographic positions and the absence of wadi discharge and as a result of low rainfall. Several potential sources of heavy metals were investigated. The industrial-related activities, port operations and phosphate dust were among the main sources currently threatening the marine ecosystem in Aqaba. Applying the Principle Components Analysis method (PCA) to all samples taken along the coastline has resulted in categorizing three different groups according to their metal enrichment, the first is composed of samples taken from the north beach and the main port with intermediate to high enrichment, the second joined the samples of the marine park and the marine reserve with low and relatively low enrichment, and the last group joined samples of the industrial zone and the oil port with high enrichment. The Principle Component Scores were also utilized to confirm the spatial distribution and relationships of the examined heavy metals along the coast. Two models (interpolated by SURFER  7.0 and ArcView 3.2a) were developed, the first was based on the PC scores of the first component, and shows clearly the positive anomalies in metal concentrations along the coast. The second model was developed by plotting the second factor scores on a landuse map of Aqaba. According to these models, it has shown that the positive anomalies are associated with three different zones; industrial area, the main port and the oil port. The results have shown that coral reefs can be used as good environmental indicator for assessments and monitoring processes, and they can provide data and information on both the spatial distribution of pollution and their history. The present work is the first to document the environmental status along the whole coast of Aqaba and the first to use coral reef as a tool/ indicator.
Rifting and breakup of Westgondwana in the Late Jurassic/ Early Cretaceous initiated the formation of the South Atlantic and its conjugated pair of passive continental margins. The Walvis Basin offshore NW-Namibia is an Early Cretaceous to recent depositional centre with a typically wedge-shaped postrift sedimentary succession covering an area of 105000km2. A 2D model transect across the central Walvis Basin and adjacent onshore areas is used as a case study to investigate quantitatively the denudational history of the evolving passive margin and the related contemporaneous depositional postrift evolution offshore. The database for both the onshore and offshore part of the model traverse is well constrained by own field work, published data as well as by seismic and well data supported by samples. The ultimate goal of this project is to present an integrated approach towards a quantitative link between surface processes and internal processes in terms of a mass and process balance.
The Skeleton Coast forms part of the Atlantic coastline of NW Namibia comprising several ephemeral rivers, which flow west-southwest towards the Atlantic Ocean. The area is hyper-arid with less than 50 mm average annual rainfall and a rainfall variability of 72%. Therefore, the major catchment areas of the rivers are about 100-200 km further inland in regions with relatively high annual rainfall of 300-600 mm. The coastal plain in the river downstream areas is characterized by a prominent NNW trending, 165 km long belt of 20-50 m high, locally compound, barchanoid and transverse dunes. This dune belt, termed Skeleton Coast Erg, starts abruptly with a series of barchans and large compound dunes 15 km north of the Koigab River and extends from 2-5 km inland sub-parallel to the South Atlantic margin of NW Namibia over a width of 3-20 km. As the SSE-NNW trending dune belt is oriented perpendicular to river flow, the dunefield dams and interacts with the west-southwestward flowing ephemeral river systems. This study focused on three main topics: 1) investigation and classification of the Koigab Fan, 2) the investigation of the Cenozoic succession in the Uniabmond area and 3) comparative studies of fluvio-aeolian interaction between five ephemeral rivers and the Skeleton Coast Erg. Sedimentological and geomorphological investigations show that the Koigab Fan represents a yet undocumented type of a braided fluvial fan system, which operates in an arid climatic, tropical latitude setting, is dominated by ephemeral mixed gravel/sand braided rivers, lacks significant vegetation on the fan surface, has been relatively little affected by human activity, is a perfect study site for recording various types of fluvio-aeolian interaction and thereby acts additionally as a model for certain Precambrian and Early Palaeozoic fan depositional systems deposited prior to the evolution of land plants. The Cenozoic succession in the Uniabmond area consists of three major unconformity-bounded units, which have been subdivided into the Red Canyon, the Whitecliff, and the Uniabmond Formation. The Tertiary Red Canyon Fm. is characterized by continental reddish sediments documenting an alluvial fan and braided river to floodplain depositional environment. The Whitecliff Fm. displays a wide variety of continental and marine facies. This formation provides the possibility to examine fluvio-aeolian interactions and spectacular, steep onlap relationships towards older sediments preserved in ancient seacliffs. The Whitecliff Fm. has been subdivided into four sedimentary cycles, which resulted from sea level changes during the Plio- to Middle Pleistocene. The following Uniabmond Fm. provides a unique insight into the depositional history of the NW Namibian coast during the Last Pleistocene glacial cycle. The formation has been subdivided into four units, which are separated by unconformities controlled by sea level changes. Unit 1 represents deposits of an Eemian palaeo-beach. The overlying Units 2-4 build up the sedimentary body of the Uniab Fan, again a braided river dominated fan, which is nowadays degraded and characterized by deeply incised valleys, deflation surfaces and aeolian landforms. The Uniabmond Fm. is overlain by the dunes of the Skeleton Coast Erg, whose development is related to the Last Glacial Maximum (LGM). The damming of river flow by aeolian landforms has been previously recognized as one of several principal types of fluvio-aeolian interaction. Five ephemeral rivers (from S to N: Koigab, Uniab, Hunkab, Hoanib, Hoarusib), which variously interact with the Skeleton Coast Erg, were chosen for the purpose of this study to consider the variability of parameters within these fluvio-aeolian systems and the resulting differences in the effectiveness of aeolian damming. The fluvio-aeolian interactions between the rivers and the dune field are controlled by the climate characteristics and the geology of the river catchment areas, the sediment load of the rivers, their depositional architecture, the longitudinal river profiles as well as the anatomy of the Skeleton Coast Erg. Resulting processes are 1) aeolian winnowing of fluvially derived sediments and sediment transfer into and deposition in the erg; 2) dune erosion during break-through resulting in hyperconcentrated flow and intra-erg mass flow deposits; 3) the development of extensive flood-reservoir basins caused by dune damming of the rivers during flood; 4) interdune flooding causing stacked mud-pond sequences; and 5) the termination of the erg by more frequent river floods.
This work presents the analysis, 3D modeling and interpretation of gravity and aeromagnetic data of Jordan and Middle East. The potential field data delineate the location of the major faults, basins, swells, anticlines, synclines and domes in Jordan. The surface geology of Jordan and the immediate area east of the Rift is dominated by two large basins, the Al-Jafr basin in the south and the Al-Azraq-Wadi as Sirhan basin to the northeast. These two basins strike southeast-northwest and are separated by an anticlinal axis, the Kilwah-Bayir swell. The Karak Wadi El Fayha fault system occurs along the western flank of the swell. The Swaqa fault occurs on the southwest hinge of Al-Azraq basin and the Fuluq fault occurs on its northeast hinge. In the south west of Jordan, Wadi Utm-Quwaira and Disi-Mudawara fault zones are shown clearly in the aeromagnetic and gravity maps. The previous major faults are well correlated with the structural map of Jordan published by Bender (1968). 3D modeling of gravity data in the Dead Sea basin (DSB) was used together with existing geological and geophysical information to give a complete structural picture of the basin. The 3D models of the DSB show that the internal structure of the Dead Sea basin (DSB) is controlled by longitudinal faults and the basin is developed as a full graben bounded by sub-vertical faults along its long sides. In the northern planes of the 3D model, the accumulation of Quaternary (salt and marl) and Mesozoic (pre-rift) sediments are thinner than in the central and southern planes of the model. In the northern planes, the thickness of the Quaternary sediments is about 4 km, 5 km in the southern planes and it exceeds 8 km in the central planes of the DSR. The thickness of the pre-rift sediments reaches 10-12 km in the northern and southern planes and exceeds 15 km in the central planes of the DSR. The planes of the 3D models show that the depth to the crystalline basement under the eastern shoulders of the DSR is shallower than those beneath the western shoulders. It is about 3-5 km beneath the eastern shoulders and 7-9 km under the western shoulder of the DSR. The gravity anomaly maps of residual and first derivative gravity delineate the subsurface basins of widely varying size, shape, and depth along the Rift Valley. The basins are created by the combination of the lateral motion along a right-tending step over and normal faulting along the opposite sides. Al Bakura basin occupies the upper Jordanian River valley and extends into the southern Tiberias Lake. Bet Shean basin to the south of Al Bakura basin plunges asymmetrically toward the east. The Damia basin, comprising the central Jordan Valley and Jericho areas to the north of the Dead Sea is shallow basin (~600-800m deep). The Lisan basin is the deepest basin in the Rift. The 3D gravity models indicate a maximum of ~12 km of basin fill. Three basins are found in Wadi Araba area, Gharandal, Timna (Qa'-Taba) and Aqaba (Elat) basin. The three basins become successively wider and deeper to the south. The three regional gravity long E-W profiles (225 km) from the Mediterranean Sea crossing the Rift Valley to the east to the Saudi Arabia borders, show the positive correlation between topography and free air anomaly and strong negative Bouguer anomaly under the central part of the Dead Sea Basin (DSB) and normal regional Bouguer anomaly outside of the DSB in the transform valley. Depth to the top of the bedrock in the under ground of Jordan was calculated from potential field data. The basement crops out in the south west of Jordan and becomes deeper to northwards and eastwards to be about ~ 8 km below ground surface in the Risha area.
A quantitative model of groundwater flows contributing to the Goblenz state water scheme at the north-western fringe of the Kalahari was developed within this study. The investigated area corresponds to the Upper Omatako basin and encompasses an outer mountainous rim and sediments of the Kalahari sand desert in the centre. This study revealed the eminent importance of the mountainous rim for the water balance of the Kalahari, both in terms of surface and ground water. A hydrochemical subdivision of groundwater types in the mountain rim around the Kalahari was derived from cluster analysis of hydrochemical groundwater data. The western and south-western secondary aquifers within rocks of the Damara Sequence, the Otavi Mountain karst aquifers of the Tsumeb and Abenab subgroups as well as the Waterberg Etjo sandstone aquifer represent the major hydrochemical groups. Ca/Mg and Sr/Ca ratios allowed to trace the groundwater flow from the Otavi Mountains towards the Kalahari near Goblenz. The Otavi Mountains and the Waterberg were identified as the main recharge areas showing almost no or only little isotopic enrichment by evaporation. Soil water balance modelling confirmed that direct groundwater recharge in hard-rock environments tends to be much higher than in areas covered with thick Kalahari sediments. According to the water balance model average recharge rates in hard-rock exposures with only thin sand cover are between 0.1 and 2.5 % of mean annual rainfall. Within the Kalahari itself very limited recharge was predicted (< 1 % of mean annual rainfall). In the Upper Omatako basin the highest recharge probability was found in February in the late rainfall season. The water balance model also indicated that surface runoff is produced sporadically, triggering indirect recharge events. Several sinkholes were discovered in the Otavi Foreland to the north of Goblenz forming short-cuts to the groundwater table and preferential recharge zones. Their relevance for the generation of indirect recharge could be demonstrated by stable isotope variations resulting from observed flood events. Within the Kalahari basin several troughs were identified in the pre-Kalahari surface by GIS-based analyses. A map of saturated thickness of Kalahari sediments revealed that these major troughs are partly saturated with groundwater. The main trough, extending from south-west to north-east, is probably connected to the Goblenz state water scheme and represents a major zone of groundwater confluence, receiving groundwater inflows from several recharge areas in the Upper Omatako basin. As a result of the dominance of mountain front recharge the groundwater of the Kalahari carries an isotopic composition of recharge at higher altitudes. The respective percentages of inflow into the Kalahari from different source areas were determined by a mixing-cell approach. According to the mixing model Goblenz receives most of its inflow (70 to 80 %) from a shallow Kalahari aquifer in the Otavi Foreland which is connected to the Otavi Mountains. Another 15 to 10 % of groundwater inflow to the Kalahari at Goblenz derive from the Etjo sandstone aquifer to the south and from inflow of a mixed component. In conclusion, groundwater abstraction at Goblenz will be affected by measures that heavily influence groundwater inflow from the Otavi Mountains, the Waterberg, and the fractured aquifer north of the Waterberg.
In north-western Namibia the fills of the Karoo-Etendeka depositories can be subdivided into (1) a Carboniferous-Permian, (2) a Triassic-Jurassic and (3) a Cretaceous megasequence, each recording extensional periods related to successive rifting phases in the evolving South Atlantic. The tectonic environment of the depositories in north-western Namibia changes successively from the coast towards the continental interior, which is reflected by the facies distribution and the position of time-stratigraphic gaps. Close to the present-day coastline synsedimentary listric faults, trending parallel to the South Atlantic rift (N-S), caused the formation of wedge shaped sediment bodies. Here, the Karoo Supergroup is only represented by the Permian succession in the Huab area. A hiatus within the Permian can be recognised by the correlation with the main Karoo Basin in South Africa and the Brazilian Paraná Basin. This stratal gap correlates with a pre-Beaufort Group unconformity in the main Karoo Basin that might be related to an orogenic pulse in the Cape Fold Belt. The Permian succession itself is unconformably overlain by the Lower Cretaceous Etendeka Group. This hiatus extending from the Upper Permian to the Lower Cretaceous has probably been induced by a combination of rift shoulder uplift and additional crustal doming associated with Etendeka flood volcanism. The enhanced tectonism during the Early Cretaceous controlled accommodation space for the alluvial-fluvial and aeolian deposits of the lower Etendeka Group. Disconformities within those deposits and the overlying lava succession attribute to distinct phases of tectonic and volcanic activity heralding the South Atlantic breakup. Towards the south-east, the Karoo succession becomes successively more complete. In the vicinity of Mt. Brandberg Early Triassic strata (Middle Omingonde Formation) follow disconformably above the Upper Permian/Lowermost Triassic Doros Formation. The sedimentation there was essentially controlled by the SW-NE trending Damaraland Uplift. South of the Damaraland Uplift the SW-NE trending Waterberg-Omaruru Fault zone is interpreted as a sinistral oblique-slip fault that compartmentalised the South Atlantic rift. This fault controlled accommodation space of the entire Triassic Omingonde Formation and the Early Jurassic Etjo Formation in its associated pull-apart and transtension structures. A locally well developed angular unconformity defines a hiatus between the two formations. Correlation with the main Karoo Basin in South Africa confirms that this gap is of a regional extent and not only a local, fault induced feature. Furthermore, it might also correlate with an orogenic pulse of the Cape Fold Belt. In general, the Mesozoic megasequences record the long-lived history of the southern Atlantic rift evolution. Rifting has been controlled by orogenic pulses derived from the Samfrau active margin throughout the Mesozoic. The associated intracratonic E-W extension caused the formation of grabens and conjugated oblique-slip zones. The generation of voluminous flood basalts marks the climax of intracratonic extension that was accompanied by enhanced uplift of the rift shoulders.