Institut für Geologie
Refine
Has Fulltext
- yes (26)
Is part of the Bibliography
- yes (26)
Year of publication
Document Type
- Doctoral Thesis (24)
- Master Thesis (2)
Keywords
- Hydrogeologie (5)
- Namibia (5)
- Grundwasserneubildung (4)
- Karoo (4)
- Geochemie (3)
- Grundwasser (3)
- Grundwasserbildung (3)
- Namibia <Nordwest> (3)
- Tuff (3)
- geophysics (3)
Institute
A completely revised and enhanced version of the water balance model MODBIL of the regional water balance dynamics of Cyprus was developed for this study. The model is based on a physical, process-oriented, spatially distributed concept and is applied for the calculation of all important water balance components of the island for the time period of 1961-2004. The calibrated results are statistically analysed and visualised for the whole island area, and evaluated with respect to the renewability of natural water resources. Climate variability and changes of the past decades are analysed with regard to their influence on water balances. A further part of the study focusses on the simulation of impacts of potential climate change. The water balances are simulated under changing climatic conditions on the base of theoretical precipitation, temperature and relative humidity changes and the revealed impacts on the water balances and renewable resources are discussed. Furthermore, a first principal water balance scenario is developed for the assessment of the regional hydrological changes expected for Cyprus by the end of the 21st century. The scenarios are based on recently calculated climate change assessments for this part of the Mediterranean, under an assumed further increase of greenhouse gasses in the atmosphere.
For many active volcanoes all over the world a civil protection program, normally combined with hazard maps, exists. Optimising of hazard maps and the associated hazard assessment implies a detailed knowledge of the volcanostratigraphy, because the deposits provoke information on the potential behaviour during a new activity cycle. Pyroclastic deposits, however, may vary widely in thickness and distribution over very short lateral distances. High resolution characterisation of single strata often cannot be archived, if solely sedimentological and geochemical methods are used. Gamma-ray measurements taken in the field combined with grain-size depended magnetic susceptibility measurements made in the laboratory are used in this work to optimise the resolution of volcanostratigraphic investigations. The island of Vulcano is part of the Aeolian Archipelago sited of the northern coast of Sicily. La Fossa cone is the active centre of Vulcano, where fumarolic and seismic activity can be observed. The cone was built up during the last 6,000 years, whereby the last eruption period is dated to historic times (1888-1890). For the tuff cone La Fossa the most likely volcanic hazards are the emplacement of pyroclastic deposits as well as gas hazards (especially SOx and CO2), due to this the detailed knowledge of the stratigraphy is mandatory. Most of the population resides in Vulcano Porto and the nearby sited peninsula of Vulcanello, which are highly endangered locations for a future eruption scenario. Measurements, made in standard outcrops, allow a characterisation of the successions Punte Nere, Tufi Varicolori, Palizzi, Commenda, and Cratere Attuale. A discrimination of all successions by solely one of the methods is rarely possible. In some cases, however, the combination of the methods leads to clear results. It can also be noticed that the exposition as well as the sedimentation type (wet-surge or dry-surge deposits) affect the measurements. In general it can be assumed that the higher the magma is evolved the higher the g -ray values and the lower the susceptibility values. Measurements from the Wingertsberg (Laacher See deposits, Eifel, W-Germany) show clearly that a higher degree of magma evolution correlates with lower susceptibility and higher gamma-ray values. Variations of the values can be observed not only by the change of the degree of magmatic evolution but also by the inhomogeneous deposition conditions. Particularly the gamma-ray measurements show lower values for the wet-surge deposits than for the dry-surge deposits, even though the erupted material has the same geochemical composition. This can be explained especially by reactions inside of the moist eruption cloud and short-time after deposition, when easily soluble elements like K, U, and Th can be leached by these aggressive fluids. Even extended exposition and high water content can provoke depletion of various elements within the complete or parts of the outcrop, too. If the deposits are affected by a fumarolic activity especially the susceptibility values show significant variations, whereas in general extreme low values are observed. Contamination of deposits also can occur, if they are overlain by weathered deposits of higher concentration of K, U, and Th. Weathering and mobilisation within the upper deposits can generate an element enrichment within the lower deposits. In general the element ratios of the barried underlying deposits are less affected than the exposed ones. After gauging the values of the well defined succession for standard outcrops undefined outcrops were measured. These outcrops are not clearly classified by sedimentological and geochemical methods, thus a correlation with the combined geophysical methods is useful. In general the combination of the methods allows a correlation, although in some cases more than one interpretation is possible. But in connection with time marker horizons as well as sedimentological features an interpretation is feasible. These situations show that a classification solely based on geophysical methods is possible for many cases but, if the volcanic system is more complex, a combination with sedimentological and geochemical methods may be needed. The investigations on Vulcano, documented in this work, recommend a re-interpretation of the dispersial of some successions of La Fossa cone, especially the presumption that Tufi Varicolori only exist inside of the Caldera of La Fossa. As a consequence the eruption and energy model especially for Tufi Varicolori have to be reviewed.
The Mesosaurus Inland Sea covered, in the Late Paleozoic, vast areas (~5 Mio km2) of the SW-Gondwanan continental interior. Major depocentres are represented by the Karoo basins of SW-Africa and the Paraná Basin in South America. These areas were interconnected prior to the break-up of Gondwana and the subsequent opening of the South Atlantic Ocean. In Namibia and South Africa deposits of the Mesosaurus Inland Sea are preserved in the successions of the glacial Dwyka Group and the postglacial Ecca Group (Karoo Supergroup). These deposits comprise the major part of a 60-70 Ma depositional cycle and are the main focus of this study. The large-scale transgressive part of this cycle started in the Late Carboniferous with continental glacial deposits followed by marine glacial and postglacial inland sea deposits. During the Early Permian the Mesosaurus Inland Sea reached its greatest extent, which was accompanied by widespread deposition of Corg-rich sediments. The large scale regressive part is recorded by successions ranging from deep water offshore pelites and turbidite sandstones to shallow water shoreface and deltaic sandstones, deposited in a brackish environment. Shallow water inland sea sediments are in turn overlain by fluvio-lacustrine deposits, which are assigned to the Beaufort Group and form the upper part of the cycle. This successive change in the depositional environment from marine to brackish to freshwater is also reflected in the fossil record. During Dwyka times a marine association of the Gondwana faunal province was able to colonize parts of the Mesosaurus Inland Sea. Later, during lower Ecca times, the connection to the Panthalassan Ocean became insufficient to retain normal marine conditions, leading to strong faunal endemism in an isolated and brackish inland sea environ¬ment. The most well-known and widespread representatives of this endemic fauna are mesosaurid vertebrates and megadesmid bivalves. Numerous altered tuffs occur as interlayers within argillaceous sediments of the Dwyka and Ecca Group of southern Namibia. The vast majority of these altered tuffs are represented by soft and crumbly to hard and indurated, clay-mineral-rich, bentonitic layers. Another, much rarer type is represented by very hard, chert-like tuff layers, which are predominantly albitic in composition. Furthermore, tuff layers within the Gai-As Formation of the Huab area are rich in potassium feldspar and have a porcelain-like appearance. The diagenetically modified matrix is mainly crypto- to microcrystalline. Polished tuff specimen show, in some tuffs, plane lamination or bedding with two or more subunits forming a tuff layer. Some display a weakly developed lamination. Only in very rare cases were structures reminiscent of sedimentary micro-cross lamination observed. The sedimentary textures and structures of the tuffs indicate that they have been deposited mainly as distal ash-fall layers by suspension settling in water. Some may have also been deposited or modified under the influence of weak bottom currents. The primary, pyroclastic macro-components of the tuffs are mainly represented by crystals of quartz, plagio¬clase, and biotite. In some thin sections pseudo¬morphs after pyroxene or hornblende were observed. Euhedral zircon and apatite crystals were observed in almost every tuff. Vitric or formerly vitric macro-components are very rare. The matrix of the majority of the investigated tuffs is predominantly composed of clay minerals. However, the matrix of the tuffs originally consisted most probably of fine vitric ash particles. Soon after deposition the volcanic ash was diagenetically altered to smectitic clay minerals. At a later stage smectite was progressively replaced by illite under prograde conditions. Nowadays the matrix of the bentonitic tuffs is strongly illite-dominated and only in the softer tuff layers a minor smectite content can be detected. Both the primary macrocrystic components as well as the geochemistry of the altered tuffs indicate that their source magmas were mainly of intermediate composition. The abundance of splintery quartz and feldspar crystal fragments within the tuffs hints at a highly explosive plinian or phreatoplinian eruption style of the source volcanoes, which were most probably located within a subduction-related volcanic arc region along the southern margin of Gondwana. New single zircon U-Pb SHRIMP datings of tuff layers provide a much more reliable age control of the investigated sedimentary succession. U-Pb SHRIMP ages for tuff layers from the glaciogenic Dwyka Group in southwestern Africa range from 302.0 ± 3.0 to 297.1 ± 1.8 Ma. The basal part of the early post-glacial Prince Albert Formation is dated at around 290 Ma. SHRIMP ages for tuff layers from the upper part of the Prince Albert Formation, the Whitehill Formation, and the middle part of the Collingham Formation indicate that the Mesosaurus Sea reached its greatest extent at around 280 Ma.
At Zwartbas, about 10 km west of Vioolsdrif, southern Namibia, the Dwyka succession is composed of tillites and distal fossiliferous dropstone-bearing glacio-marine shales. The completely exposed Dwyka succession is interbedded with thin bentonites, altered distal pyroclastic deposits, which were derived from the magmatic arc at the southern rim of Gondwana. Dropstone-bearing and dropstonefree sequences intercalate with four diamictites, of which the two lowest were certainly recognised as tillites. Four events of deglaciation were proven at Zwartbas and thus consist with correlative deposits in southern Africa. Numerous fossilised fishes, trace fossils, and plant fragments appear frequently within the lower half of the Dwyka succession whereas trace fossils were principally found in the complete succession. Although the environmental determination is quite problematic, the fossil assemblage rather implies proximal, shallow water conditions with temporary restricted oxygenation. The hinterland was covered with considerable vegetation, which points to a moderate climate. Water salinity determinations based on shale geochemistry rectify contrary palaeontological results and point to rather brackish or non-marine conditions in comparison to present-day salinites. Geochemical analyses of the bentonites relate the pyroclastic deposits with acid to intermediate source magmas, as they are known from the magmatic arc in present-day Patagonia. Tectono-magmatic comparisons furthermore emphasise a syn-collision or volcanic-arc situation of the magma source. However, significant cyclicity in the production of the pyroclastic deposits was not observed. Radiometric age determinations of two tuff beds clearly date the onset of glacial activity into the Late Carboniferous.
Thin, pyroclastic marker beds are preserved in argillaceous units of the Dwyka Group in southern Nambia and South Africa which are the earliest witnesses of volcanism in Karoo-equivalent strata of southern Africa. The aim of this study is to present the field appearance of these marker beds, to characterise their mineralogy, geochemistry and heavy mineral contents and to present new radiometric age data from their juvenile zircons. Carboniferous-Permian Karoo deposits in the Aranos Basin of southern Namibia include the glacially dominated, Carboniferous Dwyka Group and the shelf sediments of the overlying Permian Ecca Group. The Dwyka Group can be subdivided into four upward-fining deglaciation sequences, each capped by relatively fine-grained glaciolacustrine or glaciomarine deposits. The uppermost part of the second deglaciation sequence comprises a thick fossiliferous mudstone unit, referred to as the ”Ganigobis Shale Member”. An abundance of marine macro- and ichnofossils as well as extrabasinally derived ashfall tuff beds characterise the more than 40 m thick mudstones and provide the basis for an integrated high-resolution biostratigraphic and tephrostratigraphic framework. The Ganigobis Shale Member contains remains of paleoniscoid fishes, bivalves, gastropods, scyphozoa, crinoid stalks, sponges and sponge spicules, radiolaria, coprolites and permineralised wood. These mostly marine body and trace fossils record the extent of the first of a series of marine incursions into the disintegrating Gondwanan interior as early as the Carboniferous. Within the Ganigobis Shale Member 21 bentonitic tuff beds displaying a thickness of 0.1 and 2.0 cm were determined which in part can be traced laterally over tens of kilometres indicating an ashfall derivation. Further bentonitic tuff beds of the Dwyka Group were detected in cut banks of the Orange River near Zwartbas in the Karasburg Basin (southern Namibia). The 65 tuff beds vary between 0.1 and 4.0 cm in thickness. Due to a similar fossil content and age of the background deposits, the tuff beds are thought to have originated from the same source area as those from the Aranos Basin. Thin-sections reveal the derivation of the tuff beds as distal fallout ashes produced by explosive volcanic eruptions. The matrix consists of a micro- to cryptocrystalline clay mineral-quartz mixture. Rare fragments of splinter quartz, completely recrystallized ash-sized particles of former volcanic glass and few apatite and zircon grains are the only juvenile components. The tuff beds contain as non-opaque, juvenile heavy minerals mostly zircon, apatite, monazite and sphene but also biotite, garnet, hornblende and tourmaline. Geochemical analyses point to an original, intermediate to acid composition of the tuff samples. LREE enrichment and Eu-anomalies show that the parent magma of the tuff beds was a highly evolved calc-alkaline magma. Tectonomagmatic discrimination diagrams point to a volcanic arc setting. Bedding characteristics and the lack of any Carboniferous-Permian volcanic successions onshore Namibia makes an aeolian transport of the ash particles over larger distances likely. Siliceous ashes could thus have been transported by prevailing south-westerly winds from arc-related vents in South America to southern Africa. A second, more local source area could have been located in an intracontinental rift zone along the western margin of southern Africa which is indicated by north-south directed ice-flow directions in the Late Carboniferous. SHRIMP-based age determinations of juvenile magmatic zircons separated from the tuff beds allow a new time calibration of Dwyka Group deglaciation sequences II - IV and the Dwyka/Ecca boundary. Zircons of the Ganigobis Shale Member yield SHRIMP-ages of 302-300 Ma. This dates the uppermost part of the second deglaciation sequence in southern Namibia to the Late Carboniferous (Gzelian) and provides a minimum age for the onset of Karoo-equivalent marine deposition. The age of the uppermost argillaceous part of the third deglaciation sequence (297 Ma) was determined from zircons of a tuffaceous bed sampled in a roadcut in the Western Cape Province, South Africa. The deposits correlate with the Hardap Shale Member in the Aranos Basin of southern Namibia which are part of much more widespread Eurydesma transgression. The age of the Dwyka/Ecca boundary was determined by SHRIMP-measurements of juvenile zircons from two tuff beds of the basal Prince Albert Formation sampled in the Western Cape Province (South Africa). The zircons revealed ages of 289 - 288 Ma which date the Dwyka/Ecca boundary at about 290 Ma. According to these ages, deglaciation sequences II-IV lasted for 5 Ma on average.
In der vorliegenden Arbeit werden Dämme und Deiche als geologische Körper betrachtet, die in einen natürlichen geologischen Rahmen eingebettet sind, einer Diagenese unterliegen und mit geowissenschaftlichen Methoden zu erkunden sind. Dem gemäß werden alle geologischen Prozesse und umweltbedingte Einflussfaktoren erörtert, die für die Alterung von Dämmen und die Entwicklung von Schwachstellen von Bedeutung sind. Entscheidende Einflussgrößen sind geogene, aber auch biogene, anthropogene und klimatische Faktoren. Aus der Erkenntnis diesbezüglicher Zusammenhänge wird ein konzeptioneller Ansatz zu einer rein zerstörungsfreien Erkundung von Erddämmen bezogen, die neben visuellen Erkundungen und hydrogeologischen Methoden vor allem geophysikalische Verfahren, insbesondere die Widerstandsgeoelektrik nutzt. Der große Nutzen solcher Widerstandsmessungen ist vielfach belegt worden, wobei die Anwendungen aber selten den akademischen Rahmen verlassen haben. Ungeeignete apparative Ausstattungen und fehlende Messkonzepte für die speziellen Anforderungen einer wirtschaftlich sinnvollen Dammerkundung sind als Hauptgründe für die geringe Praxisnähe anzusehen. Um die zwischen theoretischer Eignung und tatsächlicher Anwendbarkeit klaffende Lücke zu schließen, wurde sowohl für die großräumige als auch zur detaillierten Erkundung von Dämmen optimiertes Zubehör entwickelt, mit dessen Hilfe zerstörungsfreie Untersuchungen mit hoher Wirtschaftlichkeit möglich sind. Von dieser Entwicklung betroffen sind mechanisch belastbare Multielektrodenkabel, verschiedene Erderkonstruktionen, Zubehör für die Aufnahme geoelektrischer Profile und für die Widerstandskartierung, sowie insbesondere auch geoelektrische Messsysteme für Untersuchungen zu Wasser. Neue Messkonzepte und Ausrüstungsbestandteile für die Eigenpotentialmethode und die Adaption der Mise-à-la-masse-Methode an die Dammerkundung vervollständigen den instrumentell/ methodischen Komplex. Als Fallbeispiele für die Umsetzung dieser neuen Konzeption dienen geophysikalische Komplex-Messungen in Verbindung mit der Aufnahme visueller Befunde. Die Untersuchungen wurden, exemplarisch für Stauhaltungsdämme, am östlichen Rheinseitendamm sowie, exemplarisch für Deiche, an einem Kanaldeich im nordöstlichen Ruhrgebiet durchgeführt.
In 2001 the 433 m deep Messel 2001 borehole was drilled in the centre of the Messel Pit, 25 km south of Frankfurt (Germany). Geoscientific results from this drilling clarified the origin of the circular-shaped basin as a maar-diatreme-structure. Recovered deposits consist of lacustrine sediments (0-240 m) and volcaniclastic rocks such as lapilli tuffs (240-373 m) as well as rocks of the underlying diatreme breccia (373 433 m). The lapilli tuffs, as main interest here, show little differentiation on a macro- and microscopic scale and appear as a massive and unsorted volcaniclastic body with dominating juvenile lapilli and accidental clasts mostly in the range of (sub)millimetres to centimetres in diameter. This study presents rock magnetic properties measured on core samples of the volcaniclastic units and explains the origin of downhole magnetic anomalies detected during the drilling project in 2001. Magnetic behaviour of the erupted material is related to fine-grained, Fe-rich (titano)-magnetites, which are dispersed within the juvenile lapilli. Temperature-dependent susceptibility experiments, isothermal remanent magnetisation and hysteresis investigations demonstrate similar ferrimagnetic properties throughout the volcaniclastic material, in terms of composition, coercivity and grain size (pseudo-single-domain particles) of the ferrimagnetic minerals. Thus, during emplacement of the erupted material, the ferrimagnetic minerals had the same remanence acquisition potential. However, demagnetisation experiments show different magnetic stability behaviour of the acquired natural remanent magnetisation (NRM). Heating experiments prove the acquisition of thermal remanent magnetisation (TRM) dominated by temperature effects which could have been occurred during eruption and deposition of volcanic material, forming the Messel maar-diatreme. It is assumed that the upper half of the lapilli tuffs was deposited at relatively low depositional temperatures (<300 °C), whereas the material of the lower half took advantage of higher temperatures (>>300 °C). To understand the rock magnetic character within the Messel maar-diatreme-facies, particle grain sizes, the degree of the relative fraction dominance and the shape of the juvenile fragments have been studied in more detail. Image analytical methods as well as major and trace element analyses on the juvenile fraction support the clear subdivision of the lapilli tuffs. These findings in combination with rockmagnetic data indicate a separation into a relatively hot, geochemically undifferentiated eruption phase and a colder, differentiated phase. A two-condition eruption stage at the end of the Messel volcanic activity is suggested. The juvenile particles account for the temperature evolution and heat conditions during deposition of the Messel tuffs and contribute to the origin of magnetic field anomalies. Based on gravity parameters and the results of magnetisation properties, the potential field 3D-model of the Messel subsurface explains the negative ground anomalies, calculates the mass and volume parameters of the drilled lithozones and shows the asymmetric appearance of the diatreme-structure.
Orogene Prozesse in kontinentalen Kollisionszonen werden in zwei- und dreidimensionalen numerischen Modellen auf Basis der Finite-Elemente Methode (FEM) untersucht. Dabei stehen die Verteilung der Deformation innerhalb der Modellkruste, die korrespondierenden Spannungsfelder und die aus Temperaturfelddaten und Partikelpfaden abgeleitete metamorphe Entwicklung von Krustengesteinen im Vordergrund. Die Studie gliedert sich in einen methodischen Teil, umfangreiche Parameterstudien und spezielle Anwendungen auf fossile und rezente Orogene. Kontinentale Kollisionszonen sind - insbesondere in den tieferen Krustenstockwerken – durch hohe Beträge penetrativer Deformation gekennzeichnet. Im methodischen Teil der Arbeit wird eine Technik vorgestellt, mit deren Hilfe Verformungen des beobachteten Umfangs mit dem auf rein LAGRANGEscher Formulierung basierenden kommerziellen FE-Programmpaket ANSYS® modelliert werden können. Die speziell für Fragestellungen orogener Krustendynamik entwickelten Programmpakete OROTRACK bzw. OROTRACK3D umfassen Neuvernetzungs- und Ergebnisverwaltungsalgorithmen, die eine Modellierung von Konvergenzbeträgen bis zu mehreren hundert Kilometern erlauben. Zusätzlich können mittels einer Schnittstelle zu Oberflächenmodellen die Folgen exogener Prozesse auf die orogene Dynamik berücksichtigt werden. Weitere Charakteristika der Modellierungstechnik sind eine vollständige thermomechanische Kopplung, die Anwendung differenzierter Materialeigenschaften für verschiedene Krustenstockwerke sowie die Möglichkeit, die Deformation - den lokal herrschenden Druck- und Temperaturbedingungen entsprechend - entweder durch spröde oder duktile Materialgesetze zu approximieren. Die zur Beschreibung eines Kollisionsszenarios aufgebrachten Randbedingungen basieren auf den Grundlagen eines Mantelsubduktionsmodells (Willett et al. 1993). In 2D-Modellen wird ebene Verformung in einem Schnitt durch die kontinentale Kruste zweier kollidierender Platten modelliert, die basal einer vom lithosphärischen Mantel aufgeprägten Verschiebung unterliegen. Wird der lithosphärische Mantel der linken Platte an einem Punkt S unter die rechte Platte subduziert, ergibt sich für den linken Modellteil eine horizontale Verschiebung der Modellbasis nach rechts, während im rechten Modellteil keine Verschiebung der Modellbasis erlaubt ist. Im Bereich des Punktes S kommt es zu einer Diskontinuität der basalen Geschwindigkeit und somit zu maximaler Deformation. In publizierten Kollisionsmodellen, die auf ähnlichen Ansätzen beruhen, wird häufig rein sprödes Materialverhalten angenommen oder der duktile Anteil der Kruste durch geringe Krustentemperaturen klein und hochviskos gehalten. Unter diesen Bedingungen kann eng auf das Orogenzentrum lokalisierte Deformation mit einem typischerweise bivergenten Strukturmuster abgebildet werden (Willett et al. 1993 u.a.). Demgegenüber beweist eine erste Reihe zweidimensionaler Parameterstudien eine starke Abhängigkeit des beobachteten Deformationsmusters von den herrschenden Krustentemperaturen und der Konvergenzrate. Bei höheren Krustentemperaturen bildet sich demnach ein Entkopplungshorizont an der Krustenbasis, der für die oberen Krustenstockwerke eine verbreiterte und diffuse Deformationszone bedingt und die erzielte Krustenverdickung limitiert. Über die Verformungsratenabhängigkeit des duktilen Materialverhaltens und den unterschiedlichen Grad thermischer Reequilibrierung innerhalb der verdickten Kruste haben Variationen der Konvergenzrate ähnliche Auswirkungen auf das orogene Deformationsmuster. Verbesserte Modelle mit Neuvernetzungstechnik werden in Parameterstudien getestet, die den Einfluss unterschiedlicher Temperatur-Viskositätsfunktionen auf die Lokalisierung der Deformation und die resultierende synkonvergente Exhumierung metamorpher Gesteine quantifizieren. Ein rheologisches Verhalten, das eine effiziente mechanische Kopplung innerhalb des Krustenprofils gewährleistet, ist demzufolge nicht nur Voraussetzung für lokalisierte Krustenverdickung, sondern auch für rasche Exhumierung von Unterkrustengesteinen durch ein Zusammenspiel von Erosion und isostatischer Hebung. Die Modelle zeigen weiter, dass maximale Exhumierungsbeträge bei rheologisch vergleichsweise festem Verhalten der Unterkruste erzielt werden. Im Einzelnen kann die Variabilität der Versenkungs- und Exhumierungsgeschichte von Materialpunkten im Modellschnitt aus synthetischen PT-Pfaden ersehen werden. Der Wirkungskomplex um Krustentemperaturen, orogene Deformationslokalisierung und synkonvergente Exhumierung ist für die Kollisionsphase der variscischen Orogenese in Mitteleuropa von besonderer Bedeutung. Hochtemperaturmetamorphose und weitverbreitete granitoide Intrusionstätigkeit sind hier Ausdruck hoher Krustentemperaturen; dennoch sind an den Grenzen der klassischen tektonometamorphen Einheiten - im Bereich von Schwarzwald und Vogesen sowie der Mitteldeutschen Kristallinschwelle (MDKS) - eng lokalisierte Teilorogene mit bivergentem Strukturmuster sowie eine rasche synkonvergente Exhumierung amphibolitfazieller Gesteine dokumentiert. Ein solches Nebeneinander ist aus Sicht der Parameterstudien nur durch eine vergleichsweise hochviskose Unterkrustenrheologie zu erklären. In einer Fallstudie zur MDKS kommen in neueren experimentellen Arbeiten bestimmte Kriechparameter (Mackwell et al. 1998) zur Anwendung, mit denen ein derartiges Materialverhalten simuliert werden kann. Der in den reflexionsseismischen Profilen DEKORP 2N und 2S dokumentierte großmaßstäbliche Strukturbau im Bereich des rhenohercynischen Falten- und Überschiebungsgürtels, der MDKS und des saxothuringischen Beckens, sowie die an heute exhumierten Gesteine bestimmten metamorphen Maximalbedingungen können auf dieser Grundlage numerisch reproduziert werden. Eine Erweiterung der Modellierungstechnik auf dreidimensionale FE-Modelle dient der Berücksichtigung orogenparalleler Deformation, die im Randbereich von Kollisionszonen in effektivem Materialtransport resultieren kann; diese Prozesse sind u.a. als „tectonic escape“ (Burke & Sengör 1986) oder „lateral extrusion“ (Ratschbacher et al. 1991b) beschrieben worden. Unter der Annahme orthogonaler Konvergenz wird im 3D-Modell der Mantelsubduktionsansatz der 2D-Modelle zunächst in orogenparalleler Richtung extrudiert (Randbereich des Kollisionsorogens). Im angrenzenden, hinteren Teil des Modells (laterales Vorland des Kollisionsorogens) ist die Modellbasis dagegen keiner Verschiebung oder Fixierung unterworfen. Die Modellränder unterliegen hier einer sogenannten „no-tilt“-Bedingung, die eine differentielle Horizontalverschiebung initial übereinanderliegender Knoten verbietet. In einer Reihe von Parameterstudien werden das kinematische Muster, die räumliche Verteilung der Deformation und die zeitlichen Variationen des oberflächlichen Spannungsfelds untersucht, die sich bei modifizierten Randbedingungen ergeben. Laterale Extrusion ist demnach im Randbereich von Kollisionsorogenen trotz unterschiedlichster Modellszenarien stets präsent. Da die Lateralbewegungen zeitgleich mit der Kollision einsetzen und im Laufe der weiteren konvergenten Krustenverkürzung nur wenig beschleunigt werden, ist der von horizontalen Kräften ausgelöste „tectonic escape“ der dominierende Prozess, während gravitativ induzierte Bewegungen nur eine sekundäre Rolle spielen. Rigide Modellränder in Teilen des lateralen Vorlands modifizieren sowohl Umfang als auch Verteilung der Horizontalbewegungen, ihre Auswirkungen auf das Orogen selbst sind dagegen vergleichsweise gering. Variationen der Krustentemperaturen, der Konvergenzrate und der Unterkrustenrheologie beeinflussen dagegen sowohl die orogene Deformation als auch die des lateralen Vorlands. Unter der Annahme einer festen, isotropen Kopplung zwischen der Krustenbasis und dem bewegten lithosphärischen Mantel werden Extrusionsraten simuliert, die 30% der Konvergenzrate nicht überschreiten. Bis zu 70% können dagegen erreicht werden, wenn eine orogenparallele Beweglichkeit der Modellbasis gestattet wird. Die überragende Bedeutung dieser basalen Randbedingung erlaubt eine Interpretation des miozänen lateralen Extrusionsereignisses in den Ostalpen (z.B. Ratschbacher et al. 1991a). Wenn im Bereich der heutigen Ostalpen zu Beginn der lateralen Extrusion noch kein orogene Topographie bestand (Frisch et al. 1998), fand laterale Extrusion zeitgleich mit bedeutender Krustenverdickung statt; dies spricht für eine Dominanz des von horizontalen Kräften induzierten Prozesses „tectonic escape“ über gravitatives Kollabieren. In jedem Fall legt das in etwa ausgeglichene Verhältnis zwischen Plattenkonvergenz und lateraler Extrusion die Existenz eines basalen Entkopplungshorizonts nahe. Andere Faktoren, die zur Erklärung des Extrusionsereignisses herangezogen werden, z.B. die Indentation der Südalpen oder ein extensives Regime im Bereich des Pannonischen Beckens, können das Deformationsmuster beeinflusst haben, die beobachteten Verschiebungsbeträge sind damit jedoch aus Sicht der Modellstudien nicht plausibel zu machen. Aufgrund ihres großen Maßstabs lassen sich die Verhältnisse bei der Kollision Indiens mit der Eurasischen Platte bislang nur phänomenologisch mit den Modellergebnissen vergleichen. Eine skalierte Fallstudie bleibt somit eine Herausforderung für zukünftige FE-Modelle.
Die bruchhafte Fragmentation von höherviskosem Magma ist ein bedeutender Prozess im explosiven Vulkanismus. Deren Fragmentationsenergie ist linear an die Entstehung neugebildeter Bruchfläche gekoppelt. Aus diesem Grund ist es wichtig, die mechanische Energie der Schmelzefragmentation zu quantifizieren, um die physikalischen Vorgänge während dieses vulkanologischen Vorgangs besser verstehen zu können. Deshalb war es das Ziel der vorliegenden Arbeit eine Kenngröße der Fragmentationsleistung von vulkanischen Schmelzen der Phlegräischen Felder (Neapel/Italien) zu definieren und somit ihren vulkanischen Ablagerungen spezifische Fragmentationsenergien zuzuweisen. Das Vulkangebiet der Phlegräischen Felder ist durch langanhaltenden explosiven Vulkanismus gekennzeichnet. Die bruchhaft entstandenen Feinaschen-Ablagerungen intermediärer Zusammensetzung bedecken ein Gebiet von ca. 1000 km2. Dieses Gebiet wird heute von ca. 2 Millionen Menschen bevölkert. Diese Arbeit stellt eine Methodik vor, mit der die Fragmentationsenergie von solchen höher-viskosen Schmelzen intermediärer Zusammensetzung durch Laborexperimente und Granulometrie der erzeugten Partikel ermittelt werden kann. Die Materialparameter der kritischen Schubspannung und des kritischen Scherstress wurden mit einem sogenannten Gasdruck-Fragmentations-Versuch (GFV) experimentell bestimmt. Ferner konnten durch den GFV Erkenntnisse über das Fragmentationsverhalten dieser Schmelzen unter verschiedenen treibenden Gasdrücken gewonnen werden. Dieser spezielle Versuchsaufbau basiert auf Fragmentation von Schmelze durch Druckluft, die von unten in einen Tiegel geleitet wird. Ein individuell einstellbarer Gasdruckluftstoß führt in der Schmelze zu einer Zunahme der Schubspannung und einem Druckaufbau, der vergleichbar mit der Kraftrampe eines Biegeversuchs ist. Während dieser Zeit kommt es zur Mikrobruchbildung, die sich von der Schmelzeoberfläche nach unten fortsetzt. Nach dem Überschreiten der Bruchgrenze relaxiert das Schmelzematerial durch Ausbildung von Sprödbrüchen und wird nach oben ausgeworfen. Die Aufzeichnung der physikalischen Parameter und die optische Versuchsüberwachung erlaubten eine komplette Energiebilanzierung des Vorgangs. Die neugebildete Bruchfläche der entstandenen Partikel wird durch Granulometrie und Anwendung der Methode von Brunnauer-Emmet-Teller (BET) bestimmt. Somit kann die Fragmentationsenergie auf die Bruchfläche bezogen und als Materialparameter des kritischen Scherstresses ausgedrückt werden. Der GFV wurden durch normierte Laborexperimente an dem selben Schmelzematerial ergänzt. Dabei dienten statische Biegeversuche unter Raumtemperatur zur Überprüfung der über GFV bilanzierten Scherstresse. Die Rotationsviskosimetrie zeigte, dass der Materialparameter der Viskosität nicht geeignet ist, um Rückschlüsse über Materialverhalten im bruchhaften Regime zu ziehen. Anschließend wurde einer definierten Tephraschicht der Phlegräischen Felder eine spezifische Fragmentationsenergie zugeordnet, indem die experimentellen Ergebnisse auf Felddaten bezogen wurden. Diese spezifische Energie von ca. 8*1010 kJ entspricht der Sprengkraft von ca. 20.000 Tonnen Trinitrotoluol (TNT). Die Qualität eines hazard assessment gefährdeter Vulkangebiete wie z.B. der Phlegräischen Felder wird durch die Kenntnis der Energieaufteilung während des Eruptionsprozesses (Fragmentationsenergie, Auswurfenergie etc.) wesentlich verbessert. Die Kenntnis der Energien dient beispielsweise der Skalierung ballistischer Modelle, mit deren Hilfe dichtbevölkerte Zonen ausgewiesen werden können, die bei künftigen Eruptionen der Phlegräischen Felder durch den Niedergang von Pyroklastika bedroht sind.
Interaktion und Vermischung kompositionell unterschiedlicher Silikatschmelzen treten im gesamten Spektrum magmatischer Aktivität auf. Dabei kann es sowohl zu Magma mingling-, als auch zu Magma mixing-Prozessen kommen. Magmatische Enklaven und Dispersionen sind dabei Zeugen der ehemaligen Interaktion und Vermischung der beteiligten Schmelzen. Diese Arbeit präsentiert ein neuartiges Modell zur Genese magmatischer Dispersionen, das auf hydrodynamischen Mischungsprozessen der beteiligten Schmelzen beruht. Es geht davon aus, dass es bei geeigneten, an der Grenzfläche zwischen zwei Schmelzen wirkenden Scherkräften zu mechanischen Mischungsprozessen unter Ausbildung von Dispersionen kommen kann. Die dafür relevanten Parameter umfassen die jeweiligen Viskositäten der Schmelzen, die zwischen ihnen herrschende Grenzflächenspannung, die anliegenden Scherraten bzw. Fließgeschwindigkeiten und die zur Verfügung stehende Zeitspanne. Die praktische Anwendbarkeit und die generelle Gültigkeit für georelevante Silikatschmelzen des Modells zur hydrodynamischen Genese magmatischer Dispersionen wurde experimentell durch Laborversuche und durch die Anwendung auf natürliche Fälle magmatischer Mischungsprozesse bestätigt. Somit steht auch ein tool im Sinne der Geospeedometrie zur Verfügung, mit dem die damaligen Temperaturen, Viskositäten und relativen Strömungsgeschwindigkeiten der beteiligten Magmen zum Zeitpunkt ihrer Vermischung berechnet und rekonstruiert werden können. Es liefert wichtige Daten zur Erfassung der kinematischen Eigenschaften von Silikatschmelzen und trägt so zur weiteren Aufklärung der komplexen magmatischen Systeme bei.