550 Geowissenschaften
Refine
Has Fulltext
- yes (20) (remove)
Is part of the Bibliography
- yes (20)
Year of publication
Document Type
- Journal article (16)
- Doctoral Thesis (3)
- Master Thesis (1)
Language
- English (20) (remove)
Keywords
- remote sensing (20) (remove)
Institute
Sonstige beteiligte Institutionen
Large-area remote sensing time-series offer unique features for the extensive investigation of our environment. Since various error sources in the acquisition chain of datasets exist, only properly validated results can be of value for research and downstream decision processes. This review presents an overview of validation approaches concerning temporally dense time-series of land surface geo-information products that cover the continental to global scale. Categorization according to utilized validation data revealed that product intercomparisons and comparison to reference data are the conventional validation methods. The reviewed studies are mainly based on optical sensors and orientated towards global coverage, with vegetation-related variables as the focus. Trends indicate an increase in remote sensing-based studies that feature long-term datasets of land surface variables. The hereby corresponding validation efforts show only minor methodological diversification in the past two decades. To sustain comprehensive and standardized validation efforts, the provision of spatiotemporally dense validation data in order to estimate actual differences between measurement and the true state has to be maintained. The promotion of novel approaches can, on the other hand, prove beneficial for various downstream applications, although typically only theoretical uncertainties are provided.
The development of retrogressive thaw slumps (RTS) is known to be strongly influenced by relief-related parameters, permafrost characteristics, and climatic triggers. To deepen the understanding of RTS, this study examines the subsurface characteristics in the vicinity of an active thaw slump, located in the Richardson Mountains (Western Canadian Arctic). The investigations aim to identify relationships between the spatiotemporal slump development and the influence of subsurface structures. Information on these were gained by means of electrical resistivity tomography (ERT) and ground-penetrating radar (GPR). The spatiotemporal development of the slump was revealed by high-resolution satellite imagery and unmanned aerial vehicle–based digital elevation models (DEMs). The analysis indicated an acceleration of slump expansion, especially since 2018. The comparison of the DEMs enabled the detailed balancing of erosion and accumulation within the slump area between August 2018 and August 2019. In addition, manual frost probing and GPR revealed a strong relationship between the active layer thickness, surface morphology, and hydrology. Detected furrows in permafrost table topography seem to affect the active layer hydrology and cause a canalization of runoff toward the slump. The three-dimensional ERT data revealed a partly unfrozen layer underlying a heterogeneous permafrost body. This may influence the local hydrology and affect the development of the RTS. The results highlight the complex relationships between slump development, subsurface structure, and hydrology and indicate a distinct research need for other RTSs.
Fresh water is a vital natural resource. Earth observation time-series are well suited to monitor corresponding surface dynamics. The DLR-DFD Global WaterPack (GWP) provides daily information on globally distributed inland surface water based on MODIS (Moderate Resolution Imaging Spectroradiometer) images at 250 m spatial resolution. Operating on this spatiotemporal level comes with the drawback of moderate spatial resolution; only coarse pixel-based surface water quantification is possible. To enhance the quantitative capabilities of this dataset, we systematically access subpixel information on fractional water coverage. For this, a linear mixture model is employed, using classification probability and pure pixel reference information. Classification probability is derived from relative datapoint (pixel) locations in feature space. Pure water and non-water reference pixels are located by combining spatial and temporal information inherent to the time-series. Subsequently, the model is evaluated for different input sets to determine the optimal configuration for global processing and pixel coverage types. The performance of resulting water fraction estimates is evaluated on the pixel level in 32 regions of interest across the globe, by comparison to higher resolution reference data (Sentinel-2, Landsat 8). Results show that water fraction information is able to improve the product's performance regarding mixed water/non-water pixels by an average of 11.6% (RMSE). With a Nash-Sutcliffe efficiency of 0.61, the model shows good overall performance. The approach enables the systematic provision of water fraction estimates on a global and daily scale, using only the reflectance and temporal information contained in the input time-series.
Irrigated agriculture in the Khorezm region in the arid inner Aral Sea Basin faces enormous challenges due to a legacy of cotton monoculture and non-sustainable water use. Regional crop growth monitoring and yield estimation continuously gain in importance, especially with regard to climate change and food security issues. Remote sensing is the ideal tool for regional-scale analysis, especially in regions where ground-truth data collection is difficult and data availability is scarce. New satellite systems promise higher spatial and temporal resolutions. So-called light use efficiency (LUE) models are based on the fraction of photosynthetic active radiation absorbed by vegetation (FPAR), a biophysical parameter that can be derived from satellite measurements. The general objective of this thesis was to use satellite data, in conjunction with an adapted LUE model, for inferring crop yield of cotton and rice at field (6.5 m) and regional (250 m) scale for multiple years (2003-2009), in order to assess crop yield variations in the study area. Intensive field measurements of FPAR were conducted in the Khorezm region during the growing season 2009. RapidEye imagery was acquired approximately bi-weekly during this time. The normalized difference vegetation index (NDVI) was calculated for all images. Linear regression between image-based NDVI and field-based FPAR was conducted. The analyses resulted in high correlations, and the resulting regression equations were used to generate time series of FPAR at the RapidEye level. RapidEye-based FPAR was subsequently aggregated to the MODIS scale and used to validate the existing MODIS FPAR product. This step was carried out to evaluate the applicability of MODIS FPAR for regional vegetation monitoring. The validation revealed that the MODIS product generally overestimates RapidEye FPAR by about 6 to 15 %. Mixture of crop types was found to be a problem at the 1 km scale, but less severe at the 250 m scale. Consequently, high resolution FPAR was used to calibrate 8-day, 250 m MODIS NDVI data, this time by linear regression of RapidEye-based FPAR against MODIS-based NDVI. The established FPAR datasets, for both RapidEye and MODIS, were subsequently assimilated into a LUE model as the driving variable. This model operated at both satellite scales, and both required an estimation of further parameters like the photosynthetic active radiation (PAR) or the actual light use efficiency (LUEact). The latter is influenced by crop stress factors like temperature or water stress, which were taken account of in the model. Water stress was especially important, and calculated via the ratio of the actual (ETact) to the potential, crop-specific evapotranspiration (ETc). Results showed that water stress typically occurred between the beginning of May and mid-September and beginning of May and end of July for cotton and rice crops, respectively. The mean water stress showed only minor differences between years. Exceptions occurred in 2008 and 2009, where the mean water stress was higher and lower, respectively. In 2008, this was likely caused by generally reduced water availability in the whole region. Model estimations were evaluated using field-based harvest information (RapidEye) and statistical information at district level (MODIS). The results showed that the model at both the RapidEye and the MODIS scale can estimate regional crop yield with acceptable accuracy. The RMSE for the RapidEye scale amounted to 29.1 % for cotton and 30.4 % for rice, respectively. At the MODIS scale, depending on the year and evaluated at Oblast level, the RMSE ranged from 10.5 % to 23.8 % for cotton and from -0.4 % to -19.4 % for rice. Altogether, the RapidEye scale model slightly underestimated cotton (bias = 0.22) and rice yield (bias = 0.11). The MODIS-scale model, on the other hand, also underestimated official rice yield (bias from 0.01 to 0.87), but overestimated official cotton yield (bias from -0.28 to -0.6). Evaluation of the MODIS scale revealed that predictions were very accurate for some districts, but less for others. The produced crop yield maps indicated that crop yield generally decreases with distance to the river. The lowest yields can be found in the southern districts, close to the desert. From a temporal point of view, there were areas characterized by low crop yields over the span of the seven years investigated. The study at hand showed that light use efficiency-based modeling, based on remote sensing data, is a viable way for regional crop yield prediction. The found accuracies were good within the boundaries of related research. From a methodological viewpoint, the work carried out made several improvements to the existing LUE models reported in the literature, e.g. the calibration of FPAR for the study region using in situ and high resolution RapidEye imagery and the incorporation of crop-specific water stress in the calculation.
Satellite-derived land surface temperature dynamics in the context of global change — a review
(2023)
Satellite-derived Land Surface Temperature (LST) dynamics have been increasingly used to study various geophysical processes. This review provides an extensive overview of the applications of LST in the context of global change. By filtering a selection of relevant keywords, a total of 164 articles from 14 international journals published during the last two decades were analyzed based on study location, research topic, applied sensor, spatio-temporal resolution and scale and employed analysis methods. It was revealed that China and the USA were the most studied countries and those that had the most first author affiliations. The most prominent research topic was the Surface Urban Heat Island (SUHI), while the research topics related to climate change were underrepresented. MODIS was by far the most used sensor system, followed by Landsat. A relatively small number of studies analyzed LST dynamics on a global or continental scale. The extensive use of MODIS highly determined the study periods: A majority of the studies started around the year 2000 and thus had a study period shorter than 25 years. The following suggestions were made to increase the utilization of LST time series in climate research: The prolongation of the time series by, e.g., using AVHRR LST, the better representation of LST under clouds, the comparison of LST to traditional climate change measures, such as air temperature and reanalysis variables, and the extension of the validation to heterogenous sites.
Inland surface water is often the most accessible freshwater source. As opposed to groundwater, surface water is replenished in a comparatively quick cycle, which makes this vital resource — if not overexploited — sustainable. From a global perspective, freshwater is plentiful. Still, depending on the region, surface water availability is severely limited. Additionally, climate change and human interventions act as large-scale drivers and cause dramatic changes in established surface water dynamics. Actions have to be taken to secure sustainable water availability and usage. This requires informed decision making based on reliable environmental data. Monitoring inland surface water dynamics is therefore more important than ever. Remote sensing is able to delineate surface water in a number of ways by using optical as well as active and passive microwave sensors. In this review, we look at the proceedings within this discipline by reviewing 233 scientific works. We provide an extensive overview of used sensors, the spatial and temporal resolution of studies, their thematic foci, and their spatial distribution. We observe that a wide array of available sensors and datasets, along with increasing computing capacities, have shaped the field over the last years. Multiple global analysis-ready products are available for investigating surface water area dynamics, but so far none offer high spatial and temporal resolution.
The boreal winter 2019/2020 was very irregular in Europe. While there was very little snow in Central Europe, the opposite was the case in northern Fenno-Scandia, particularly in the Arctic. The snow cover was more persistent here and its rapid melting led to flooding in many places. Since the last severe spring floods occurred in the region in 2018, this raises the question of whether more frequent occurrences can be expected in the future. To assess the variability of snowmelt related flooding we used snow cover maps (derived from the DLR's Global SnowPack MODIS snow product) and freely available data on runoff, precipitation, and air temperature in eight unregulated river catchment areas. A trend analysis (Mann-Kendall test) was carried out to assess the development of the parameters, and the interdependencies of the parameters were examined with a correlation analysis. Finally, a simple snowmelt runoff model was tested for its applicability to this region. We noticed an extraordinary variability in the duration of snow cover. If this extends well into spring, rapid air temperature increases leads to enhanced thawing. According to the last flood years 2005, 2010, 2018, and 2020, we were able to differentiate between four synoptic flood types based on their special hydrometeorological and snow situation and simulate them with the snowmelt runoff model (SRM).
Advances in remote inventory and analysis of forest resources during the last decade have reached a level to be now considered as a crucial complement, if not a surrogate, to the long-existing field-based methods. This is mostly reflected in not only the use of multiple-band new active and passive remote sensing data for forest inventory, but also in the methodic and algorithmic developments and/or adoptions that aim at maximizing the predictive or calibration performances, thereby minimizing both random and systematic errors, in particular for multi-scale spatial domains. With this in mind, this editorial note wraps up the recently-published Remote Sensing special issue “Remote Sensing-Based Forest Inventories from Landscape to Global Scale”, which hosted a set of state-of-the-art experiments on remotely sensed inventory of forest resources conducted by a number of prominent researchers worldwide.
Increasing urbanisation is one of the biggest pressures to vegetation in the City of Cape Town. The growth of the city dramatically reduced the area under indigenous Fynbos vegetation, which remains in isolated fragments. These are subject to a number of threats including atmospheric deposition, atypical fire cycles and invasion by exotic plant and animal species. Especially the Port Jackson willow (Acacia saligna) extensively suppresses the indigenous Fynbos vegetation with its rapid growth.
The main objective of this study was to investigate indicators for a quick and early prediction of the health of the remaining Fynbos fragments in the City of Cape Town with help of remote sensing.
First, the productivity of the vegetation in response to rainfall was determined. For this purpose, the Enhanced Vegetation Index (EVI), derived from Terra MODIS data with a spatial resolution of 250m, and precipitation data of 19 rainfall stations for the period from 2000 till 2008 were used. Within the scope of a flexible regression between the EVI data and the precipitation data, different lags of the vegetation response to rainfall were analysed. Furthermore, residual trends (RESTREND) were calculated, which result from the difference between observed EVI and the one predicted by precipitation. Negative trends may suggest a degradation of the habitats. In addition, the so-called Rain-use Efficiency (RUE) was tested in this context. It is defined as the ratio between net primary production (NPP) – represented by the annual sum of EVI – and the annual rainfall sum. These indicators were analysed for their suitability to determine the health of the indigenous Fynbos vegetation.
Furthermore, the degree of dispersal of invasive species especially the Acacia saligna was investigated. With the specific characteristics of the tested indicators and the spectral signature of Acacia saligna, i.e. its unique reflectance over the course of the year, the dispersal was estimated. Since the growth of invasive species dramatically reduces the biodiversity of the fragments, their presence is an important factor for the condition of ecosystem health.
This work focused on 11 test sites with an average size of 200ha, distributed over the whole area of the City of Cape Town. Five of these fragments are under conservation and the others shall be protected in the near future, too, which makes them of special interest. In January 2010, fieldwork was undertaken in order to investigate the state and composition of the local vegetation.
The results show promising indicators for the assessment of ecosystem health. The coefficients of determination of the EVI-rainfall regression for Fynbos are minor, because the reaction of this vegetation type to rainfall is considerably lower than the one of the invasive species. Thus, a good distinction between indigenous and alien vegetation is possible on the basis of this regression. On the other hand, the RESTREND method, for which the regression forms the basis, is only of limited use, since the significance of these trends is not given for Fynbos vegetation. Furthermore, the RUE has considerable potential for the assessment of ecosystem health in the study area. The Port Jackson willow has an explicitly higher EVI than the Fynbos vegetation and thus its RUE is more efficient for a similar amount of rainfall. However, it has to be used with caution, because local and temporal variability cannot be extinguished in the study area over the rather short MODIS time series.
These results display that the interpretation of the indicators has to be conducted differently from the literature, because the element of invasive species was not considered in most of the previous papers. An increase in productivity is not necessarily equivalent with an improvement in health of the fragment, but can indicate a dispersal of Acacia saligna. This shows the general problem of the term ‘degradation’ which in most publications so far is only measured by productivity and other factors like invasive species are disregarded.
On the basis of the EVI-rainfall regression and statistical measures of the EVI, the distribution of invasive species could be delineated. Generally, a strong invasion of the Port Jackson willow was discovered on the test sites. The results display that a reasoned and sustainable management of the fragments is essential in order to prevent the suppression of the indigenous Fynbos vegetation by Acacia saligna. For this purpose, remote sensing can give an indication which areas changed so that specific field surveys can be undertaken and subsequent management measures can be determined.
The production of commodities such as cocoa, rubber, oil palm and cashew, is the main driver of deforestation in West Africa (WA). The practiced production systems correspond to a land managment approach referred to as agroforestry systems (AFS), which consist of managing trees and crops on the same unit of land.Because of the ubiquity of trees, AFS reported as viable solution for climate mitigation; the carbon sequestrated by the trees could be estimated with remote sensing (RS) data and methods and reported as emission reduction efforts. However, the diversity in AFS in relation to their composition, structure and spatial distribution makes it challenging for an accurate monitoring of carbon stocks using RS. Therefore, the aim of this research is to propose a RS-based approach for the estimation of carbon sequestration in AFS across the climatic regions of WA. The main objectives were to (i) provide an accurate classification map of AFS by modelling the spatial distribution of the classification error; (ii) estimate the carbon stock of AFS in the main climatic regions of WA using RS data; (iii) evaluate the dynamic of carbon stocks within AFS across WA. Three regions of interest (ROI) were defined in Cote d'Ivoire and Burkina Faso, one in each climatic region of WA namely the Guineo-Congolian, Guinean and Sudanian, and three field campaigns were carried out for data collection. The collected data consisted of reference points for image classification, biometric tree measurements (diameter, height, species) for biomass estimation. A total of 261 samples were collected in 12 AFS across WA. For the RS data, yearly composite images from Sentinel-1 and -2 (S1 and S2), ALOS-PALSAR and GEDI data were used. A supervised classification using random forest (RF) was implemented and the classification error was assessed using the Shannon entropy generated from the class probabilities. For carbon estimation, different RS data, machine learning algorithms and carbon reference sources were compared for the prediction of the aboveground biomass in AFS. The assessment of the carbon dynamic was carried between 2017 and 2021. An average carbon map was genrated and use as reference for the comparison of annual carbon estimations, using the standard deviation as threshold. As far as the results are concerned, the classification accuracy was higher than 0.9 in all the ROIs, and AFS were mainly represented by rubber (38.9%), cocoa (36.4%), palm (10.8%) in the ROI-1, mango (15.2%) and cashew (13.4%) in ROI-2, shea tree (55.7%) and African locust bean (28.1%) in ROI-3. However, evidence of misclassification was found in cocoa, mango, and shea butter. The assessment of the classification error suggested that the error level was higher in the ROI-3 and ROI-1. The error generated from the entropy was able to reduced the level of misclassification by 63% with 11% of loss of information. Moreover, the approach was able to accuretely detect encroachement in protected areas. On carbon estimation, the highest prediction accuracy (R²>0.8) was obtained for a RF model using the combination of S1 and S2 and AGB derived from field measurements. Predictions from GEDI could only be used as reference in the ROI-1 but resulted in a prediction error was higher in cashew, mango, rubber and cocoa plantations, and the carbon stock level was higher in African locust bean (43.9 t/ha), shea butter (15 t/ha), cashew (13.8 t/ha), mango (12.8 t/ha), cocoa (7.51 t/ha) and rubber (7.33 t/ha). The analysis showed that carbon stock is determined mainly by the diameter (R²=0.45) and height (R²=0.13) of trees. It was found that crop plantations had the lowest biodiversity level, and no significant relationship was found between the considered biodiversity indices and carbon stock levels. The assessment of the spatial distribution of carbon sources and sinks showed that cashew plantations are carbon emitters due to firewood collection, while cocoa plantations showed the highest potential for carbon sequestration. The study revealed that Sentinel data could be used to support a RS-based approach for modelling carbon sequestration in AFS. Entropy could be used to map crop plantations and to monitor encroachment in protected areas. Moreover, field measurements with appropriate allometric models could ensure an accurate estimation of carbon stocks in AFS. Even though AFS in the Sudanian region had the highest carbon stocks level, there is a high potential to increase the carbon level in cocoa plantations by integrating and/or maintaining forest trees.