Lehrstuhl für Tissue Engineering und Regenerative Medizin
Refine
Has Fulltext
- yes (48)
Is part of the Bibliography
- yes (48)
Year of publication
Document Type
- Doctoral Thesis (48) (remove)
Keywords
- Tissue Engineering (24)
- In-vitro-Kultur (4)
- In vitro (3)
- Stammzelle (3)
- Zellkultur (3)
- 3D tumour model (2)
- Dünndarm (2)
- Elektrospinnen (2)
- Gewebekultur (2)
- Hautmodell (2)
Institute
- Lehrstuhl für Tissue Engineering und Regenerative Medizin (48)
- Graduate School of Life Sciences (24)
- Fakultät für Biologie (4)
- Klinik und Poliklinik für Thorax-, Herz- u. Thorakale Gefäßchirurgie (2)
- Julius-von-Sachs-Institut für Biowissenschaften (1)
- Theodor-Boveri-Institut für Biowissenschaften (1)
Sonstige beteiligte Institutionen
Cardiovascular diseases are considered the leading cause of death worldwide according to the World Health Organization. Heart failure is the last stage of most of these diseases, where loss of myocardium leads to architectural and functional decline.
The definitive treatment option for patients with CVDs is organ or tissue transplantation, which relies on donor availability. Therefore, generating an autologous bioengineered myocardium or heart could overcome this limitation. In addition, generating cardiac patches will provide ventricular wall support and enable reparative stem cells delivery to damaged areas. Although many hurdles still exist, a good number of researches have attempted to create an engineered cardiac tissue which can induce endogenous cardiac repair by replacing damaged myocardium.
The present study provided cardiac patches in two models, one by a detergent coronary perfusion decellularization protocol that was optimized, and the other that resulted in a 3D cell-free extracellular matrix with intact architecture and preserved s-glycosaminoglycan and vasculature conduits. Perfusion with 1% Sodium dodecyle sulfate (SDS) under constant pressure resulted in cell-free porcine scaffold within two and cell-free rat scaffold in 7 days, whereas scaffold perfused with 4% sodium deoxycholate (SDO) was not able to remove cells completely. Re-reendothelialization of tissue vasculature was obtained by injecting human microvascular endothelial cell and human fibroblast in 2:1 ratio in a dynamic culture. One-week later, CD31 positive cells and endothelium markers were observed, indicating new blood lining. Moreover, functionality test of re-endothelialized tissue revealed improvement in clotting seen in decellularized tissues. When the tissue was ready to be repopulated, porcine induced pluripotent stem cells (PiPSc) were generated by transfected reprogramming of porcine skin fibroblast and then differentiated to cardiac cells following a robust protocol, for an autologous cardiac tissue model. However, due to the limitation in the PiPSc cell number, alternatively, human induced pluripotent stem cells generated cardiac cells were used.
For reseeding a coculture of human iPSc generated cardiac cells, human mesenchymal stem cells and human fibroblast in 2:1:1 ratio respectively were used in a dynamic culture for 6-8 weeks. Contractions at different areas of the tissue were recorded at an average beating rate of 67 beats/min. In addition, positive cardiac markers (Troponin T), Fibroblast (vemintin), and mesenchymal stem cells (CD90) were detected. Not only that, but by week 3, MSC started differentiating to cardiac cells progressively until few CD90 positive cells were very few by week 6 with increasing troponin t positive cells in parallel. Electrophysiological and drug studies were difficult to obtain due to tissue thickness and limited assessment sources. However, the same construct was established using small intestine submucosa (SISer) scaffold, which recorded a spontaneous beating rate between 0.88 and 1.2 Hz, a conduction velocity of 23.9 ± 0.74 cm s−1, and a maximal contraction force of 0.453 ± 0.015 mN. Moreover, electrophysiological studies demonstrated a drug-dependent response on beating rate; a higher adrenalin frequency was revealed in comparison to the untreated tissue and isoproterenol administration, whereas a decrease in beating rate was observed with propranolol and untreated tissue.
The present study demonstrated the establishment of vascularized cardiac tissue, which can be used for human clinical application.
Cancer remains after cardiovascular diseases the leading cause of death worldwide and an estimated 8.2 million people died of it in 2012. By 2030, 13 million cancer deaths are expected due to the growth and ageing of the population. Hereof, colorectal cancer (CRC) is the third most common cancer in men and the second in women with a wide geographical variation across the world. Usually, CRC begins as a non-cancerous growth leading to an adenomatous polyp, or adenoma, arising from glandular cells. Since research has brought about better understanding of the mechanisms of cancer development, novel treatments such as targeted therapy have emerged in the past decades. Despite that, up to 95% of anticancer drugs tested in clinical phase I trials do not attain a market authorisation and hence these high attrition rates remain a key challenge for the pharmaceutical industry, making drug development processes enormously costly and inefficient. Therefore, new preclinical in vitro models which can predict drug responses in vivo more precisely are urgently needed. Tissue engineering not only provides the possibility of creating artificial three-dimensional (3D) in vitro tissues, such as functional organs, but also enables the investigation of drug responses in pathological tissue models, that is, in 3D cancer models which are superior to conventional two-dimensional (2D) cell cultures on petri dishes and can overcome the limitations of animal models, thereby reducing the need for preclinical in vivo models. In this thesis, novel 3D CRC models on the basis of a decellularised intestinal matrix were established. In the first part, it could be shown that the cell line SW480 exhibited different characteristics when grown in a 3D environment from those in conventional 2D culture. While the cells showed a mesenchymal phenotype in 2D culture, they displayed a more pronounced epithelial character in the 3D model. By adding stromal cells (fibroblasts), the cancer cells changed their growth pattern and built tumour-like structures together with the fibroblasts, thereby remodelling the natural mucosal structures of the scaffold. Additionally, the established 3D tumour model was used as a test system for treatment with standard chemotherapeutic 5-fluorouracil (5-FU). The second part of the thesis focused on the establishment of a 3D in vitro test system for targeted therapy. The US Food and Drug Administration has already approved of a number of drugs for targeted therapy of specific types of cancer. For instance, the small molecule vemurafenib (PLX4032, Zelboraf™) which demonstrated impressive response rates of 50–80% in melanoma patients with a mutation of the rapidly accelerated fibrosarcoma oncogene type B (BRAF) kinase which belongs to the mitogen active protein kinase (MAPK) signalling pathway. However, only 5% of CRC patients harbouring the same BRAF mutation respond to treatment with vemurafenib. An explanation for this unresponsiveness could be a feedback activation of the upstream EGFR, reactivating the MAPK pathway which sustains a proliferative signalling. To test this hypothesis, the two early passage cell lines HROC24 and HROC87, both presenting the mutation BRAF V600E but differing in other mutations, were used and their drug response to vemurafenib and/or gefitinib was assessed in conventional 2D cell culture and compared to the more advanced 3D model. Under 3D culture conditions, both cell lines showed a reduction of the proliferation rate only in the combination therapy approach. Furthermore, no significant differences between the various treatment approaches and the untreated control regarding apoptosis rate and viability for both cell lines could be found in the 3D tumour model which conferred an enhanced chemoresistance to the cancer cells. Because of the observed unresponsiveness to BRAF inhibition by vemurafenib as can be seen in the clinic for patients with BRAF mutations in CRC, the cell line HROC87 was used for further xenografting experiments and analysis of activation changes in the MAPK signalling pathway. It could be shown that the cells presented a reactivation of Akt in the 3D model when treated with both inhibitors, suggesting an escape mechanism for apoptosis which was not present in cells cultured under conventional 2D conditions. Moreover, the cells exhibited an activation of the hepatocyte growth factor receptor (HGFR, c-Met) in 2D and 3D culture, but this was not detectable in the xenograft model. This shows the limitations of in vivo models. The results suggest another feedback activation loop than that to the EGFR which might not primarily be involved in the resistance mechanism. This reflects the before mentioned high attrition rates in the preclinical drug testing.
Diabetes mellitus is an incurable, metabolic disease, which is associated with severe long-term complications. The in vitro generation of pancreatic β-cells from human induced pluripotent stem cells (hiPSCs) represent a promising strategy for a curative therapy of diabetes mellitus. However, current differentiation strategies largely fail to produce functional β-cells in vitro and require an additional in vivo transplantation to achieve terminal maturation. Previous studies demonstrated a beneficial effect of the extracellular matrix (ECM) on the survival and sustained function of adult, isolated islets of Langerhans. This raises the question whether organ-specific cell-ECM interactions might represent the missing link driving the final stage of β-cell development. In order to address this issue, this study investigated the impact of the pancreas ECM on in vitro β-cell differentiation and its use for the establishment of a pancreatic endocrine organ model.
To this purpose, a pancreas-specific ECM scaffolds (PanMa) was derived from porcine pancreata using whole organ decellularization with Sodium Deoxycholate. In a first step, the generated PanMa was thoroughly characterized using (immuno-) histological stainings, scanning electron microscopy and DNA quantification as well as perfusion and recellularization experiments with endothelial cells. Based on these data, a scoring system (PancScore) for a standardized PanMa generation was developed. Next, the generated PanMa was tested for the presence of tissue-specific ECM features. Therefore, the biophysical and physico-structural characteristics, such as rigidity, porosity and hygroscopy were analyzed using rheological measurements, particle diffusion analyses as well as a water evaporation assay and compared to the properties of ECM scaffolds derived from porcine small intestine (SISser) and lung (LungMa) to examine organ-specific scaffold cues. Following the thorough scaffold characterization, the impact of the PanMa on pluripotency and early development of hiPSC was studied. To this purpose, gene and protein expression of hiPSCs during maintenance culture and spontaneous differentiation on the PanMa were assessed. In a next step, the impact of the PanMa on the pancreatic endocrine differentiation of hiPSCs was tested. Therefore, the PanMa was used as a liquid media supplement or as a solid scaffold during the directed differentiation of hiPSC towards either pancreatic hormone-expressing cells (Rezania et al. 2012; Rezania et al. 2014) or maturing β-cells (Rezania et al. 2014). The impact of the PanMa on the generated cells was examined by gene expression analysis, immunohistochemical staining of important stage markers, as well as glucose stimulated insulin secretion assays. In a last part of this study, the potential of the PanMa for the prolonged culture of hiPSC derived endocrine cells for the establishment of an in vitro organ model of the endocrine pancreas was examined. Therefore, a PanMa-derived hydrogel was generated and used for the encapsulation and culture of hiPSC-derived hormone-expressing cells (HECs). The influence of the PanMa-hydrogel culture was analyzed on gene, protein and functional level by gene expression analysis, immunohistochemical stainings and glucose stimulated insulin secretion.
Whole organ decellularization resulted in the generation of an acellular PanMa scaffold, with low amounts of residual DNA and a preserved ECM micro- and ultrastructure, including important ECM components, such as collagen I, III and IV. Furthermore, the PanMa maintained an intact vessel system and was verified as cytocompatible as demonstrated by the successful recellularization of the arterial system with human endothelial cells. In comparison to SISser and LungMa, the PanMa was characterized as a relative soft, hygroscopic scaffold with a collagen-fiber based structure. Furthermore, the findings indicate that the ECM-specific properties have a relevant effect on the stem cell character and early multi-lineage decisions of hiPSCs. In this regard, maintenance of hiPSCs on the PanMa resulted in a slightly changed expression of pluripotency genes (OCT4, SOX2 and NANOG) and a weak immunohistochemical signal for NANOG protein, indicating a PanMa-dependent impact on hiPSC pluripotency. Strikingly, this presumption was corroborated by the finding that culture on the PanMa promoted an endodermal development of hiPSCs during spontaneous differentiation. In line with that, pancreatic differentiation of hiPSC on both the PanMa and SISser resulted in a significant decrease of glucagon and somatostatin gene expression as well as an unaltered insulin expression, suggesting an ECM-driven suppression of the development of non β-cell endocrine cells. However, this change did not result in an improved glucose stimulated insulin secretion of the generated HECs. Moreover, use of the PanMa as a hydrogel allowed prolonged culture of these cells in a defined culture system. HECs were viable after 21 days of culture, however already showed an altered islet morphology as well as a slightly decreased glucose stimulated insulin secretion.
Altogether, this study demonstrates a relevant biological effect of tissue specific ECM cues on the in vitro differentiation of hiPSCs. More specifically, the data indicate an involvement of the ECM in the endocrine commitment of hiPSC-derived pancreatic cells during directed differentiation highlighting the ECM as an important regulator of pancreatic development. Collectively, these findings emphasize the relevance of the ECM for the fabrication of functional hiPSC-derived cell types and suggest a much stronger consideration of organ specific ECM cues for tissue engineering approaches as well as clinical translation in regenerative medicine.
Hintergrund
Jede Implantation alloplastischer Materialien führt durch Aktivierung der körpereigenen Immunabwehr zu einer Fremdkörperreaktion. An der Synthese der Extrazellulärmatrix und der entstehenden Kollagenkapsel sind insbesondere Makrophagen und Fibroblasten beteiligt. Diese Reaktionen können die Material-Funktionsfähigkeit abschwächen, aufheben oder zu deren operativer Entfernung zwingen.
Fragestellung und Ziele
Spinnenseide ist ein Material mit hoher Biokompatibilität. Nachdem es gelungen ist, Spinnenseide rekombinant herzustellen, soll untersucht werden, wie sich die Verträglichkeit alloplastischer Materialien durch eine Beschichtung mit biotechnologisch hergestellter Spinnenseide beeinflussen lässt.
Eine weitere Möglichkeit ist der TGF-β-Synthese-Inhibitor Halofuginon, der ebenfalls hinsichtlich seiner Potenz, die Ausbildung einer Fibrosekapsel zu vermindern, untersucht werden soll.
Methodik
Anhand von in-vitro-Untersuchungen wurden die bei der Fremdkörperreaktion beteiligten Zelltypen auf ihr Proliferationsverhalten und die Expression unterschiedlicher Genprodukte hinsichtlich bestehender Unterschiede zwischen den jeweiligen Oberflächenbeschichtungen untersucht. Es wurden immunhistochemische Färbungen zum Nachweis spezifischer Oberflächenantigene, Bestimmungen von ATP- und DNA-Gehalt als Maß für die Zellzahl, sowie molekulargenetische Untersuchungen hinsichtlich der Expression relevanter Markergene (rtPCR) durchgeführt.
Ergebnisse
Eine Beschichtung mit rekombinanter Spinnseide führt - im Vergleich zu reinen Silikonimplantaten - zu einer verzögerten und reduzierten Immunreaktion. Die EZM-Synthese und die damit verbundene fremdkörperassoziierte Fibrose werden vermindert und so die Biokompatibilität alloplastischer Materialien gesteigert.
In Deutschland erkranken jährlich etwa 500.000 Menschen an Krebs, wovon circa
12.000 die Diagnose „Leukämie“ gestellt bekommen [1]. Unter den Leukämien weist
die akute myeloische Leukämie (AML) die ungünstigste Prognose auf, sodass hier
erheblicher Forschungsbedarf besteht. Zusätzlich schnitten viele potentielle Therapeutika,
die sich in bisherigen präklinischen Testsystemen als vielversprechend erwiesen
haben, in klinischen Studien schlecht ab [8]. Ziel dieser Arbeit war daher die
Etablierung eines 3D in vitro Blutgefäß-/Gewebemodells als verbessertes präklinisches
System zur Testung von Therapeutika, die zur erfolgreichen Behandlung von
Leukämien beitragen sollen.
Das 3D Blutgefäßmodell bestand aus humanen primären Endothelzellen, welche
als Monolayer auf der Serosaseite einer dezellularisierten, porzinen, intestinalen Kollagenmatrix
(SIS-Ser) wuchsen. Nach 14-tägiger Zellkultur wurden dem Versuchsansatz
entsprechend nichtadhärente THP-1 Zellen (AML-M5-Zelllinie) und Tipifarnib
oder entsprechende Kontrolllösungen beziehungsweise bimolekulare Antikörperkonstrukte
mit PBMCs als Effektorzellen hinzupipettiert. Nach 5-tägiger Inkubation
mit Tipifarnib beziehungsweise 24-stündiger Behandlung mit Antikörperkonstrukten
wurde der therapiebedingte Anstieg der Apoptoserate in den malignen THP-1 Zellen
mittels durchflusszytometrischer Analyse der Modellüberstände ermittelt. Zum
Ausschluss verbliebener und durchflusszytometrisch zu analysierender Zellen wurde,
stellvertretend für alle Suspensionszellen, eine Anti-CD13/DAB-Färbung durchgeführt,
welche negativ ausfiel. Mögliche Kollateralschäden am Endothel wurden
mittels histologischen Färbemethoden an Gewebeparaffinschnitten untersucht.
In der Durchflusszytometrie zeigte Tipifarnib sowohl im 2D als auch im 3D Modell
äquivalente, dosisabhängige und antileukämische Auswirkungen auf die THP-1 Zellen.
Bei Applikation der Antikörperkonstrukte ließ lediglich die Kombination beider Hemibodies signifikante Effekte auf die THP-1 Zellen erkennen. Dabei zeigten sich
bei konstanten Konzentrationen der Antikörperkonstrukte im 3D Modell deutlich
höhere Apoptoseraten (58%) als im 2D Modell (38%). Stellt man Vergleiche von
Tipifarnib mit den T-Zell-rekrutierenden Antikörperkonstrukten an, so ließen sich
im 2D Modell ähnliche Apoptoseraten in den THP-1 Zellen erzielen (jeweils 38% bei
Anwendung von 500 nM Tipifarnib). In den 3D Modellen erzielten jedoch die niedriger
konzentrierten Antikörperkonstrukte bei kürzerer Inkubationsdauer eine noch
höhere spezifische Apoptoserate in den THP-1 Zellen (im Mittel 58%) als 500 nM
Tipifarnib (mittlere Apoptoserate 40%). Bezüglich der Nebenwirkungen ließ sich
im 3D Modell nach Applikation von Antikörperkonstrukten kein wesentlicher Einfluss
auf das Endothel erkennen, während Tipifarnib/DMSO als auch die mit DMSO
versetzten Kontrolllösungen zu einer dosisabhänigen Destruktion des ursprünglichen
Endothelzellmonolayers führten. Damit stellt die hier beschriebene, hoch spezifische,
Hemibody-vermittelte Immuntherapie einen vielversprechenden Ansatz für zukünftige
onkologische Therapien dar.
Mithilfe des etablierten humanen 3D in vitro Modells konnte im Vergleich zur
konventionellen Zellkultur eine natürlichere Mikroumgebung für Zellen geschaffen
und die Auswirkungen der Testsubstanzen sowohl auf maligne Zellen, als auch auf
die Gefäßstrukturen untersucht werden.
Bevor ein zellbasiertes GTMP erstmalig beim Menschen angewendet werden kann, müssen verschiedene notwendige nicht-klinische Studien durchgeführt werden. Wichtig ist hier u.a. die Untersuchung der Biodistribution im Tiermodel. Diese umfasst die Verteilung, das Engraftment, die Persistenz, die Eliminierung und gegebenenfalls die Expansion der humanen Zellen in verschiedenen Organen, meistens im Mausmodel. Deshalb wurde eine qPCR-basierte Analysenmethode entwickelt, mit der humane genomische DNA innerhalb von muriner genomischer DNA bestimmt werden kann, und entsprechend den regulatorischen Richtlinien der European Medicines Agency und des International Council for Harmonisation validiert. Anschließend wurde diese Methode innerhalb einer präklinischen worst-case Szenario Biodistributionsstudie angewendet. Das Ziel dieser Studie war die Untersuchung des Biodistributionsprofils von genetisch modifizierten Blood Outgrowth Endothelial Cells von Hämophilie A Patienten 24 Stunden und sieben Tage nach intravenöser Applikation einer Dosis von 2x106 Zellen. Die Isolation, genetische Modifikation und die Expansion der Zellen sollte entsprechend den Richtlinien der Guten Herstellungspraxis durchgeführt werden. Hierbei ist die Auswahl und Anwendung geeigneter und essentieller Rohstoffe wichtig. Gleichermaßen ist die Durchführung einer definierten Qualitätskontrollstrategie notwendig und die Patientenzellen sollten nur innerhalb von nicht-klinischen Studien eingesetzt werden, wenn alle Akzeptanzkriterien erfüllt wurden. Die Validierung der qPCR-Methode zeigte eine hohe Genauigkeit, Präzision und Linearität innerhalb des Konzentrationsintervalls von 1:1x103 bis 1:1x106 humanen zu murinen Genomen. Bei Anwendung dieser Methode für die Biodistributionsstudie konnten nach 24 Stunden humane Genome in vier der acht untersuchten Mausorgane bestimmt werden. Nach sieben Tagen konnten in keinem der acht Organe humane Genome nachgewiesen werden...
Aufgrund der sich umkehrenden Alterspyramide in Deutschland leiden bereits jetzt immer mehr Menschen an Gelenkknorpelschäden. Doch nicht nur das Alter, sondern auch Unfälle und Sportverletzungen und Übergewicht können zu irreversiblen Knorpeldefekten führen. Obwohl es diverse Behandlungsmöglichkeiten gibt, können die bisherige Methoden nicht als dauerhafte Heilung betrachtet werden. Im Rahmen des internationalen Forschungsprojektes BIO-CHIP sollte eine vielsprechende Behandlungsmethode mit neuartigen Arzneimitteln untersucht werden.
Als Ausgangsmaterial des Arzneimittels, ein hergestelltes Knorpelimplantat, dienen patienteneigene Knorpelzellen aus der Nase. Diese werden isoliert, vermehrt und letztlich auf einer Matrix zu einem Knorpelimplantat kultiviert. Wesentliche Voraussetzung für die Implantatfreigabe stellt neben toxikologischen und biologischen Unbedenklichkeitstests die Beurteilung der Viabilität dar. Diese wurde bisher anhand von Histologieschnitten von der Pathologie durchgeführt.
Ziel der vorliegenden Arbeit war die Entwicklung und Validierung eines standardisierten und objektiven Viabilitätstests für die Chondrozyten innerhalb der Knorpelmatrix. Hierfür wurde die LDH als Marker für irreversibel geschädigte Zellen verwendet. Die LDH Konzentration konnte mit dem CyQuant LDH-Assay durch die Messung der Absorption gemessen werden. Es konnte nachgewiesen werden, dass LDH die erforderliche Stabilität und Nachweisbarkeit im Medium besitzt. Mithilfe der Lyse, analog zum Herstellungsprozess, gezüchteter Mini-Knorpelimplantate, konnten die maximal erreichbaren LDH Konzentrationen ermittelt werden. Mithilfe dieser Konzentrationen wurde eine Eichkurve generiert. Diese dient als Beurteilung der Viabilität zukünftig gemessener Absorptionen des Überstandmediums.
Das entwickelte Verfahren erfordert keine invasiven Eingriffe am Implantat und zeichnet sich durch eine einfache Durchführung aus, da nur der Überstand gemessen werden muss. Die durchgeführte Validierung der Methode bescheinigte eine hohe Robustheit, Linearität, Genauigkeit und Präzision.
Entwicklungsaspekte eines Medizinproduktes zur Prävention und Überwachung von Hydrierungszuständen
(2018)
Der demografische Wandel und das Populationswachstum stellen eine globale Herausforderung für die Gesundheitssysteme dar. Eine vielversprechende Lösungsstrategie liegt in der digitalen Überwachung, Prävention und Therapie akuter und chronischer Erkrankungen durch die Nutzung von innovativen Technologien aus dem Bereich der personalisierten Medizin.
Die Digitalisierung in der Überwachung von Vitalparametern mittels Sensorik besitzt großes Potential für die längere Gesunderhaltung der Patienten und somit die Entlastung der Gesundheitssyteme im Ganzen.
Da Wassermangel für eine Vielfalt von Krankheiten einen Katalysator darstellt, ist die Hydratation ein wichtiger aber bislang nur invasiv zugänglicher Vitalparameter. Zur Etablierung nicht invasiver Messungen des Wasserhaushaltes am Menschen wurde im Rahmen dieser Arbeit die Eignung der Mikrowellentechnologie untersucht.
Dehydratation resultiert in der Veränderung des Osmolythaushaltes und beeinflusst biochemische Prozesse, was zur Entstehung von Morbidität führen kann. Im Rahmen der Arbeit werden Teilbereiche der Entwicklung eines Medizinproduktes abgebildet. Zu diesem Zweck wird die Machbarkeit der mikrowellenbasierten Analyse des Wasserhaushaltes in einer technischen Machbarkeitsstudie untersucht, um im zweiten Prozessschritt einen technischen Demonstrator in vitro und in vivo am Probanden erproben zu können. Hochfrequente elektromagnetische Wellen interagieren mit Molekülen, speziell Wasser. Enthält eine Probe freie Wassermoleküle, kann dies im reflektierten Signal detektiert werden. Zur Überprüfung des Sensorsystems in vitro dienen humane 3D-Vollhautmodelle mit spezifischer Hydratation und Gewebedichte der Matrixkomponenten als standardisiertes Modell zur Untersuchung definierter Exsikkoseszenarien und des Einflusses verschiedener Modellkomplexitäten. Die Eignungsüberprüfung des Systems mit einem technischen Demonstrator des künftigen Medizinproduktes belegt die Anwendbarkeit des Messsystems zur Erfassung des relativen Wassergehaltes. Die Technologie zeichnet sich durch eine hohe Sensitivität bei der Destinktion von Proben mittels Frequenz- und Signalreflektionsdifferenzen aus. Neben den In-vitro-Testungen wird das entwickelte Sensorsystem aus regulatorischer Sicht zur klinischen Leistungsüberprüfung vorbereitet und im Rahmen eines bewilligten Ethikvotums in vivo erprobt. Die Ergebnisse belegen die Machbarkeit der nichtinvasiven Erfassung des Wasserhaushaltes durch mikrowellenbasierte Messungen. Die Technologie birgt das Potential, in ein körpernahes Sensorsystem integriert zu werden, welches als Medizinprodukt zur persönlichen Gesundheitsüberwachung zugelassen werden kann.
The small intestine represents a strong barrier separating the lumen from blood circulation thereby playing a major role in the absorption and the transport of pharmacological agents prior to their arrival on the respective target site. In order to gain more knowledge about specialized uptake mechanisms and risk assessment for the patient after oral admission of drugs, intestinal in vitro models demonstrating a close similarity to the in vivo situation are needed.
In the past, cell line-based in vitro models composed of Caco-2 cells cultured on synthetic cell carriers represented the “gold standard” in the field of intestinal tissue engineering. Expressive advantages of these models are a reproducible, cost-efficient and standardized model set up, but cell function can be negatively influenced by the low porosity or unwanted molecular adhesion effects of the artificial scaffold material. Natural extracellular matrices (ECM) such as the porcine decellularized small intestinal submucosa (SIS) are used as alternative to overcome some common drawbacks; however, the fabrication of these scaffolds is time- and cost-intensive, less well standardized and the 3Rs (replacement, reduction, refinement) principle is not entirely fulfilled. Nowadays, biopolymer-based scaffolds such as the bacterial nanocellulose (BNC) suggest an interesting option of novel intestinal tissue engineered models, as the BNC shows comparable features to the native ECM regarding fiber arrangement and hydrophilic properties. Furthermore, the BNC is of non-animal origin and the manufacturing process is faster as well as well standardized at low costs.
In this context, the first part of this thesis analyzed the BNC as alternative scaffold to derive standardized and functional organ models in vitro. Therefore, Caco-2 cells were cultured on two versions of BNC with respect to their surface topography, the unmodified BNC as rather smooth surface and the surface-structured BNC presenting an aligned fiber arrangement. As controls, Caco-2 in vitro models were set up on PET and SIS matrices. In this study, the BNC-based models demonstrated organ-specific properties comprising typical cellular morphologies, a characteristic tight junction protein expression profile, representative ultrastructural features and the formation of a tight epithelial barrier together with a corresponding transport activity. In summary, these results validated the high quality of the BNC-based Caco-2 models under cost-efficient conditions and their suitability for pre-clinical research purposes. However, the full functional diversity of the human intestine cannot be presented by Caco-2 cells due to their tumorigenic background and their exclusive representation of mature enterocytes.
Next to the scaffold used for the setup of in vitro models, the cellular unit mainly drives functional performance, which demonstrates the crucial importance of mimicking the cellular diversity of the small intestine in vitro. In this context, intestinal primary organoids are of high interest, as they show a close similarity to the native epithelium regarding their cellular diversity comprising enterocytes, goblet cells, enteroendocrine cells, paneth cells, transit amplifying cells and stem cells. In general, such primary organoids grow in a 3D Matrigel® based environment and a medium formulation supplemented with a variety of growth factors to maintain stemness, to inhibit differentiation and to stimulate cell migration supporting long term in vitro culture.
Intestinal primary spheroid/organoid cultures were set up as Transwell®-like models on both BNC variants, which resulted in a fragmentary cell layer and thereby unfavorable properties of these scaffold materials under the applied circumstances. As the BNC manufacturing process is highly flexible, surface properties could be adapted in future studies to enable a good cell adherence and barrier formation for primary intestinal cells, too. However, the application of these organoid cultures in pre-clinical research represents an enormous challenge, as the in vitro culture is complex and additionally time- and cost-intensive.
With regard to the high potential of primary intestinal spheroids/organoids and the necessity of a simplified but predictive model in pre-clinical research purposes, the second part of this thesis addressed the establishment of a primary-derived immortalized intestinal cell line, which enables a standardized and cost-efficient culture (including in 2D), while maintaining the cellular diversity of the organoid in vitro cultures. In this study, immortalization of murine and human intestinal primary organoids was induced by ectopic expression of a 10- (murine) or 12 component (human) pool of genes regulating stemness and the cell cycle, which was performed in cooperation with the InSCREENeX GmbH in a 2D- and 3D-based transduction strategy. In first line, the established cell lines (cell clones) were investigated for their cell culture prerequisites to grow under simplified and cost-efficient conditions. While murine cell clones grew on uncoated plastic in a medium formulation supplemented with EGF, Noggin, Y-27632 and 10% FCS, the human cell clones demonstrated the necessity of a Col I pre coating together with the need for a medium composition commonly used for primary human spheroid/organoid cultures. Furthermore, the preceding analyses resulted in only one human cell clone and three murine cell clones for ongoing characterization. Studies regarding the proliferative properties and the specific gene as well as protein expression profile of the remaining cell clones have shown, that it is likely that transient amplifying cells (TACs) were immortalized instead of the differentiated cell types localized in primary organoids, as 2D, 3D or Transwell®-based cultures resulted in slightly different gene expression profiles and in a dramatically reduced mRNA transcript level for the analyzed marker genes representative for the differentiated cell types of the native epithelium. Further, 3D cultures demonstrated the formation of spheroid-like structures; however without forming organoid-like structures due to prolonged culture, indicating that these cell populations have lost their ability to differentiate into specific intestinal cell types. The Transwell®-based models set up of each clone exhibit organ-specific properties comprising an epithelial-like morphology, a characteristic protein expression profile with an apical mucus-layer covering the villin-1 positive cell layer, thereby representing goblet cells and enterocytes, together with representative tight junction complexes indicating an integer epithelial barrier. The proof of a functional as well as tight epithelial barrier in TEER measurements and in vivo-like transport activities qualified the established cell clones as alternative cell sources for tissue engineered models representing the small intestine to some extent. Additionally, the easy handling and cell expansion under more cost-efficient conditions compared to primary organoid cultures favors the use of these newly generated cell clones in bioavailability studies.
Altogether, this work demonstrated new components, structural and cellular, for the establishment of alternative in vitro models of the small intestinal epithelium, which could be used in pre-clinical screenings for reproducible drug delivery studies.
Für die Verwendung von zellbasierten Therapeutika ist vor allem die korrekt Identifikation
sowohl vom Ausgangsmaterial wie auch dem produziertem Material von
zentraler Wichtigkeit. In dieser Arbeit wurde eine Methodik entwickelt, welche eine
nicht-invasive Klassifizierung von Zellen und zellulärer Entwicklung aufgrund ihrer
zweidimensionalen Magnetresonanz-Korrelationsspektren ermöglichte.
Hierzu wurde ein mobiler MR-Scanner mit einer Feldstärke von 0.5T und einem Isozentrum
von 1 cm3 verwendet. Aufgrund der kompakten und leichten Bauweise war
es möglich, das System in normalen Zellkulturlaboren zu verwenden. Von den Proben
wurde ein zweidimensionales T1/T2 -Korrelationsspektrum aufgenommen, anhand
dessen die Zellen klassifiziert werden sollten. Mithilfe von Agarose-Dotagraf® -Zell-
Phantomen konnte die Stabilität und Reproduzierbarkeit des Messsystems und der
verwendeten Sequenz validiert werden.
Aufgrund der unter Umständen recht langen Messzeiten der MR-Technologie war
auch die Handhabung und Kultur der Zellproben während des Messprozesses von
großer Bedeutung. Um hierfür den Durchsatz an Proben zu erhöhen, wurde eine kostengünstige
und ebenfalls mobile Robotikanlage entwickelt. Diese basierte auf dem
kommerziell erhältlichen Roboterarm Braccio, welcher durch einen Arduino Mega
Mikrocontroller gesteuert wurde. Mit bis zu 24 Proben pro Tag konnte durch die
Automatisierung der Durchsatz an Proben um den Faktor 3 – 4 gesteigert werden.
Durch den entwickelten Prozess war es möglich, eine umfangreiche Datenbank –
bestehend aus 362 unabhängigen Messungen (biologische Replikate) – aufzubauen.
Die Datenbank enthielt Messungen von zehn unterschiedlichen Zelllinien. Zusätzlich
wurden T1/T2 -Korrelationsspektren von mesenchymalen Stromazellen (MSCs)
vor und nach deren Differenzierung zu Adipocyten aufgenommen, um ihre zelluläre
Entwicklung nicht-invasiv charakterisieren zu können.
Die aufgenommenen Daten wurden mithilfe einer geeigneten Support Vector Machine
wie auch angepassten künstlichen neuronalen Netzwerken klassifiziert. Mithilfe
dieser Methoden konnten die Zelllinien und MSCs anhand ihrer aufgenommenen
Korrelationsspektren mit einer Genauigkeit von bis zu 98% klassifiziert werden.
Diese hohe Treffsicherheit legte den Schluss nahe, dass die Kombination aus nichtinvasiver,
zweidimensionaler T1/T2 -MR-Relaxometrie und der Verwendung von geeigneten
Methoden des machine learning und der künstlichen Intelligenz eine effiziente
Methodik für die nicht-invasive Klassifizierung von Zellen sowie zellulärer
Entwicklung darstellt.